Skip to main content

Test All Sprinkler Zones — Test Sprinkler Head Functionality

Beginner4 hours

Part of project

Irrigation System Repair · Step 4 of 10

Helpful?

In this video

Manually activate each sprinkler zone through your control panel. As each zone runs, walk around your yard to observe the performance of every sprinkler head. Look for heads that are not popping up, spraying incorrectly (e.g., onto sidewalks or structures), or providing insufficient coverage. Make a note of any issues found.

60.5K views260
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

like that set we can go ahead and turn on that sprinkler system manually and then we're just going to walk around our yards and take note of all the sprinkler heads and if there are any that are out of whack we'll want to make a note of that so that when we turn the sprinklers from off we can start adjusting that. Basically what you're looking for is making sure there's no water spraying on sidewalks, making sure that all of those zones turn on without water spraying everywhere, seeing the fall of your heads pop up and that you're just getting good water coverage across the entire lawn.

Auto-generated transcript. May contain errors.