Skip to main content

Assess Sprinkler Performance — Inspect and Clean Sprinkler Heads

Beginner4 hours

Part of project

Irrigation System Repair · Step 3 of 10

Helpful?

In this video

Begin by observing your lawn for any brown or dead spots, which may indicate insufficient watering due to poorly performing sprinklers. Then, activate your sprinkler system to visually inspect each pop-up sprinkler head. Look for sprinklers that are not fully extending, spraying unevenly, or not reaching their intended coverage area.

1.3K views9
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

hey guys Suburban home nut here and today we're going to do a little bit of maintenance on my sprinklers and if you haven't already please consider subscribing and clicking the like button now we should be watering our Lawns about two to three times per week during the growing season and that means putting down about a quarter inch of water per application but sometimes we start getting brown or dead spots in our grass and we start thinking well I just need to water more but there might be something else going on with the sprinkler the sprinkler could be clogged up with goop and debris which isn't allowing for good coverage to check and

Auto-generated transcript. May contain errors.