Skip to main content

Test and Diagnose Sprinkler Zones — Identify the Problem Area

Beginner4 hours

Part of project

Irrigation System Repair · Step 1 of 10

Helpful?

In this video

Go to the irrigation system controller (e.g., Rain Bird ESP-6Si) and manually activate each zone one by one. Walk the property to observe the sprinkler heads in each zone. Look for issues such as heads that are stuck open (spraying when they shouldn't be), clogged (not spraying or spraying weakly), misdirected (spraying onto structures or non-irrigated areas), or damaged. Note down any heads requiring adjustment or replacement.

396.3K views2.4K
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

little drip right now and hit manual start this is going to be backyard South all right hear water running all right apparently backyard South is just these things these little squirters they're all that's interesting they're I don't know if they're supposed to be watering the grass no they're not supposed to be watering the grass cuz we've got those this one looks good I really really do not like pointing sprinklers at a person's house and look at this one I'm going to rotate this over these little scraggle bushes here this one here's shooting up like a geyser right there this one here is pointed out back into the grass again not sure what's up with that but I think it's supposed to be pointed at at these plants I'm going to get completely sprayed if I move this board so I'm going to turn it off then go move this board and I don't know that may be tucked too far underneath the deck I may have to relocate this sprinkler out got a couple issues that one there looks like it's clogged this one's got a bush on top of it or a pot or something let's moveth this sucker down that one actually looks pretty decent I'm getting soaked we got a little minor issue here this is not supposed to be on these are supposed to be off everything's supposed to be off so we got one that is stuck open it's

Auto-generated transcript. May contain errors.