Skip to main content

Clear Debris from Sprinkler Heads — Inspect and Clean Sprinkler Heads

Beginner4 hours

Part of project

Irrigation System Repair · Step 3 of 10

Helpful?

In this video

Walk around your yard and locate all sprinkler heads. Use your hands or a small tool to remove any grass, leaves, dirt, or other debris that has covered or fallen into the sprinkler head housing during the winter months. Ensure the area immediately around and inside the sprinkler head is clear so it can extend and retract without obstruction. This step is crucial for proper water flow and coverage.

1.2K views14
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

hi and welcome to another video by get it on the home repairs today we're going to talk about how to prepare your sprinklers for the summer first thing you want to do is you have to the winter of course you go outside and you clear out any of the overgrowth that has covered up the sprinkler head such as the grass from last year or debris from the winter time you want to clean out all of the all of the tubes where the sprinklers will pop up out of to get anything out of there as you can see over the winter you have a lot of debris in there next thing we'll do is we'll go

Auto-generated transcript. May contain errors.