Skip to main content

Inspect for Physical Damage — Identify the Problem Area

Beginner4 hours

Part of project

Irrigation System Repair · Step 1 of 10

Helpful?

In this video

Before measuring water distribution, conduct a preliminary visual inspection of your irrigation system. Turn on your irrigation system for a few minutes and walk around your yard, actively looking for any visible issues. Check for broken sprinkler heads, leaks in the lines (which might manifest as puddles or wet spots), or geysers (strong, uncontrolled jets of water) that indicate significant damage or improper installation. Address any immediate physical damage or malfunction before proceeding with further measurements.

3.0K views13
The Handyman

532K subscribers

View Channel

FAQs

What specialized tools are essential for irrigation system repair beyond general household tools?

You'll definitely need a good shovel for digging, especially around pipes without damaging them. A hook and pick set is invaluable for cleaning stubborn sprinkler nozzles, and an adjustable wrench will help with various fittings. Don't forget PVC primer and cement for pipe repairs, and Teflon tape for threaded connections.

My sprinkler zone isn't turning on at all. Where should I start troubleshooting?

First, verify the zone is programmed correctly on your controller and that the master valve (if you have one) is open. Then, locate the valve for the non-working zone. Manually turn the solenoid a quarter turn counter-clockwise or flip its lever to see if the sprinklers activate, which helps isolate if the issue is electrical or mechanical within the valve itself.

How can I pinpoint an underground leak without excavating my entire lawn?

Look for unusually wet or overly green spots in your yard, or areas where the grass is unusually lush. You can also listen for hissing sounds near the main line or check your water meter for continuous movement even when all water sources are off, indicating a constant flow.

What are the most important safety precautions to take when digging for underground irrigation repairs?

Always call 811 (or your local 'dig safe' number) a few days before you dig to have underground utility lines marked. Wear sturdy gloves to protect your hands from debris and tools. Dig carefully and by hand when you get close to pipes or marked lines to avoid damaging them or other utilities.

Transcript
Hide

let's talk about why that's important. First, it keeps your grass healthy by watering it right amount in the right areas. It conserves water. And it also helps with the water bill. When beginning an audit, we'll check for any leaks, geysers, or broken heads. Run your irrigation system for a few minutes, and then walk around your yard to check. Next, let's measure how much water your grass is actually getting. To figure this out, we'll place sprinkler gauges at even intervals throughout each irrigation zone. If you don't have one

Auto-generated transcript. May contain errors.