Skip to main content

Strengthen Stair Stringers — Reinforce Stair Stringers and Treads

Beginner5 mins

Part of project

How to Reduce Noise from Stairs and Upstairs Floors · Step 6 of 7

Helpful?

In this video

After removing any old, broken step boards, the next critical step is to reinforce the stair stringers (also known as risers). The presenter points out common areas where stringers crack, often due to over-cutting during the original construction. To provide support, install 2x4 or 2x6 lumber blocks to the inside of the cracked stringers. Secure these support blocks firmly using 3-inch deck screws to provide as much stability as possible.

7.6K views106
Soundproof Guide

193K subscribers

View Channel

FAQs

How long will this project realistically take for a beginner, and what contributes to the 5-day estimate?

The 5-day estimate accounts for drying times for adhesives, thorough inspection, and the step-by-step nature of addressing multiple noise sources. For a beginner, setting aside dedicated blocks of time, especially for tasks like installing new flooring or insulating, will be crucial. Breaking it into smaller phases over a few weekends can make it more manageable.

Are all the listed tools and materials absolutely essential, or can I use alternatives for some?

While basic tools like a measuring tape and screwdriver are common, specialized items such as a countersink drill bit ensure professional results. For materials, using high-quality sound-dampening underlayment and construction adhesive is key for effectiveness. Avoid substituting critical soundproofing materials, as their unique properties are vital for noise reduction.

My floors still creak after screwing down loose boards. What else could be the issue?

Persistent creaks often indicate movement between the subfloor and joists, or within the subfloor layers themselves. From below, carefully tap shims between joists and subfloor where gaps exist, securing them with adhesive. Ensure all screws penetrate securely into the joists, and consider adding more fasteners in problem areas.

What are the most important safety precautions I should take during this noise reduction project?

Always wear safety glasses when drilling, cutting, or working with insulation to protect your eyes. A dust mask is recommended when handling insulation or creating dust from old materials. If working in attics or crawl spaces, use a bright flashlight for visibility and ensure stable footing to prevent falls.

Transcript
Hide

all right and then once you get the old step pried off the first thing you can do is re-support the area where it broke off because there's a good chance that the risers are cracked out in the cuts there okay like you can see right here this you know there was that piece was too small to put back it's on the ones i try to put back in place and screw them all in there just to give as much support as you can but that's why i've got this two by six here on the inside to re-support it because this this was cracked and you can see a lot of the reasons that they get cracked really easy a lot of times they over cut when they when they build them and then so from here to here or sometimes right through here cracks as they get old that definitely happens a lot and when i did the repairs on those three steps i added a few more blocks where there was just more cracks to help keep them from completely breaking as you can see i had a board there added a board there there now that one there is actually on the step that i replaced and then down that way of course as well

Auto-generated transcript. May contain errors.