Skip to main content

Install Acoustic Underlayment — Install Sound-Dampening Underlayment

Beginner5 mins

Part of project

How to Reduce Noise from Stairs and Upstairs Floors · Step 3 of 7

Helpful?

In this video

Once the subfloor is perfectly flat and dry, an acoustic underlayment is unrolled across the entire surface. This material helps to reduce noise and vibrations and can also act as a moisture barrier. The underlayment is typically cut to fit the room using a utility knife, ensuring it covers the entire subfloor without significant overlaps or gaps. It is important to lay the underlayment flat and smooth.

12.6K views222
Soundproof Guide

193K subscribers

View Channel

FAQs

How long will this project realistically take for a beginner, and what contributes to the 5-day estimate?

The 5-day estimate accounts for drying times for adhesives, thorough inspection, and the step-by-step nature of addressing multiple noise sources. For a beginner, setting aside dedicated blocks of time, especially for tasks like installing new flooring or insulating, will be crucial. Breaking it into smaller phases over a few weekends can make it more manageable.

Are all the listed tools and materials absolutely essential, or can I use alternatives for some?

While basic tools like a measuring tape and screwdriver are common, specialized items such as a countersink drill bit ensure professional results. For materials, using high-quality sound-dampening underlayment and construction adhesive is key for effectiveness. Avoid substituting critical soundproofing materials, as their unique properties are vital for noise reduction.

My floors still creak after screwing down loose boards. What else could be the issue?

Persistent creaks often indicate movement between the subfloor and joists, or within the subfloor layers themselves. From below, carefully tap shims between joists and subfloor where gaps exist, securing them with adhesive. Ensure all screws penetrate securely into the joists, and consider adding more fasteners in problem areas.

What are the most important safety precautions I should take during this noise reduction project?

Always wear safety glasses when drilling, cutting, or working with insulation to protect your eyes. A dust mask is recommended when handling insulation or creating dust from old materials. If working in attics or crawl spaces, use a bright flashlight for visibility and ensure stable footing to prevent falls.

Transcript
Hide

grinder knocks down high spots and opens the surface. Then the edges are finished by hand. Everything is vacuumed. Low spots are filled with mortar. And we start again on a perfectly flat base. Next, an acoustic underlay is rolled out to cut vibrations. Then comes the adhesive spread with a notched tel. The ridges control thickness and keep the glue layer uniform. Each plank is laid along a guideline, locked into place, and gently tapped so the pattern stays

Auto-generated transcript. May contain errors.