Skip to main content

Fix Squeaky Floorboards — Address Floorboard Creaks

Beginner5 mins

Part of project

How to Reduce Noise from Stairs and Upstairs Floors · Step 2 of 7

Helpful?

In this video

After removing the old carpet and pad, inspect the subfloor for loose nails, which are a common cause of squeaky floorboards. Use a hammer to firmly tap down any visible loose nails until they are flush with the subfloor. For a more permanent solution and to prevent future squeaks, use a cordless drill with a screwdriver bit to drive 1 1/4 inch wood screws into the subfloor, ensuring they penetrate into the floor joists beneath. These screws will securely fasten the subfloor to the joists, eliminating movement and noise. The video shows using a Folgers coffee can to hold the screws, which is a common DIY practice for organizing small parts.

27.9K views242
Soundproof Guide

193K subscribers

View Channel

FAQs

How long will this project realistically take for a beginner, and what contributes to the 5-day estimate?

The 5-day estimate accounts for drying times for adhesives, thorough inspection, and the step-by-step nature of addressing multiple noise sources. For a beginner, setting aside dedicated blocks of time, especially for tasks like installing new flooring or insulating, will be crucial. Breaking it into smaller phases over a few weekends can make it more manageable.

Are all the listed tools and materials absolutely essential, or can I use alternatives for some?

While basic tools like a measuring tape and screwdriver are common, specialized items such as a countersink drill bit ensure professional results. For materials, using high-quality sound-dampening underlayment and construction adhesive is key for effectiveness. Avoid substituting critical soundproofing materials, as their unique properties are vital for noise reduction.

My floors still creak after screwing down loose boards. What else could be the issue?

Persistent creaks often indicate movement between the subfloor and joists, or within the subfloor layers themselves. From below, carefully tap shims between joists and subfloor where gaps exist, securing them with adhesive. Ensure all screws penetrate securely into the joists, and consider adding more fasteners in problem areas.

What are the most important safety precautions I should take during this noise reduction project?

Always wear safety glasses when drilling, cutting, or working with insulation to protect your eyes. A dust mask is recommended when handling insulation or creating dust from old materials. If working in attics or crawl spaces, use a bright flashlight for visibility and ensure stable footing to prevent falls.

Transcript
Hide

the back side like I'm doing the subflooring underneath the pad in the carpet is riding up and down the loose nails and that's what's causing the squeaking so the way to fix that problem is go ahead and hammer in all the nails that you see and then drill in some inch and a quarter wood screws I'm going to drill these into the joist and these are going to be a more permanent solution because they won't loosen like the regular nails will you'll need to

Auto-generated transcript. May contain errors.