Skip to main content

Seal Mass Loaded Vinyl Seams — Add Mass-Loaded Vinyl (MLV)

Beginner5 mins

Part of project

How to Reduce Noise from Stairs and Upstairs Floors · Step 4 of 7

Helpful?

In this video

After securing the mass loaded vinyl to the ceiling, use Red Devil caulking to seal all seams where the different sheets of MLV meet. This ensures a continuous, airtight barrier, preventing sound from leaking through any gaps between the material sheets.

171.7K views2.4K
Soundproof Guide

193K subscribers

View Channel

FAQs

How long will this project realistically take for a beginner, and what contributes to the 5-day estimate?

The 5-day estimate accounts for drying times for adhesives, thorough inspection, and the step-by-step nature of addressing multiple noise sources. For a beginner, setting aside dedicated blocks of time, especially for tasks like installing new flooring or insulating, will be crucial. Breaking it into smaller phases over a few weekends can make it more manageable.

Are all the listed tools and materials absolutely essential, or can I use alternatives for some?

While basic tools like a measuring tape and screwdriver are common, specialized items such as a countersink drill bit ensure professional results. For materials, using high-quality sound-dampening underlayment and construction adhesive is key for effectiveness. Avoid substituting critical soundproofing materials, as their unique properties are vital for noise reduction.

My floors still creak after screwing down loose boards. What else could be the issue?

Persistent creaks often indicate movement between the subfloor and joists, or within the subfloor layers themselves. From below, carefully tap shims between joists and subfloor where gaps exist, securing them with adhesive. Ensure all screws penetrate securely into the joists, and consider adding more fasteners in problem areas.

What are the most important safety precautions I should take during this noise reduction project?

Always wear safety glasses when drilling, cutting, or working with insulation to protect your eyes. A dust mask is recommended when handling insulation or creating dust from old materials. If working in attics or crawl spaces, use a bright flashlight for visibility and ensure stable footing to prevent falls.

Transcript
Hide

roll that will cost you hundreds of dollars. So, just measure how much you need and just buy what you need and don't buy any more. After you've added your mass loaded vinyl onto ceiling, get your Red Devil caulking and cover that seam in between each layer of mass loaded vinyl. You should be good to go to add your next layer of drywall, which you'll want to add a 5/8 in drywall, not a 1/2 in drywall because it'll stop a little bit more noise and it's just a little bit more money, not that much. But, usually on a ceiling a lot of

Auto-generated transcript. May contain errors.