Skip to main content

Measure and Cut Risers — Cut and Fit New Risers

Intermediate7 mins

Part of project

How to Update a Split-Level Entry Staircase · Step 4 of 10

Helpful?

In this video

After cutting the treads, dry-fit one of the new treads onto its corresponding stair. This allows for accurate measurement of the riser height. Using a measuring tape, measure the height of the riser from the top surface of the dry-fitted tread to the underside of the next tread's bullnose. Again, take two width measurements (top and bottom) of the riser opening to account for any irregularities. To prevent chipping when cutting the riser material, apply painter's tape along the marked cut line. Use a small circular saw to cut the riser material to the measured height, aligning the saw's guard with the inside edge of the tape for a straight cut. For the width cuts, use the compound miter saw, similar to the treads.

36.7K views575
Transcript
Hide

All right, let's measure and mark the rest of our treads and get them cut. I've measured and cut all my treads. Now I want to dry fit this tread, not only to make sure it fits, perfect fit, but it also allows me to go ahead and measure the riser. So I'm going to set the measuring tape on top of the tread. And I'm looking for this measurement just underneath this lip. Now just like measuring the tread, we're going to take two measurements on our width. One at the top, great, and one at the bottom. And they match. Great. Let's go cut our risers. Now we're going to cut the height of our riser. So the first thing I'm going to do is make marks all along my board. And I'm using the measurements that I took earlier. And just making marks very six inches or so, a little trick to help avoid any chipping while you're cutting is to use some painter's tape. And I'm simply going to press it down and line it up with the marks that I just made. And now I'm ready to cut. So to cut the height of our riser, I'm going to use this small circular saw. And this particular saw comes with a guard that helps me not only line up the blade with the inside of my tape, but it ensures that I have a nice, even, straight cut all the way down. Now we're going to cut the width of our risers. And just like with the treads, we're going to use this compound miter saw. And all this left to do is measure, mark, and cut. Alright, let's measure and cut the rest of our risers.

Auto-generated transcript. May contain errors.