Skip to main content

Measure and Cut Treads — Measure and Cut Stair Treads

Beginner2 mins

Part of project

How to Replace Wall-To-Wall Stair Carpet with Removable Treads · Step 3 of 6

Helpful?

In this video

To ensure accurate cuts for the treads, begin by measuring the depth of each tread from the back of the subfloor to the front edge using a measuring tape. Next, measure the width of the tread at both the back and the front edges. Since walls are rarely perfectly square, taking two width measurements ensures a precise custom fit. The presenter uses a Kobalt compound miter saw to cut the tread material to the required width. She advises cutting slightly outside the measured line to allow for minor adjustments later. If the depth of the tread needed to be trimmed (which was not the case in this video), a circular saw would be used.

36.7K views575
Transcript
Hide

All right, let's measure. Now our first measurement is going to be the stair tread, the top of our stair. And we're going to measure the depth first. So we're going to put the measuring tape all the way up against the subfloor and measure it to the front of the stair. And I'm actually just going to take a couple measurements. We're good. Those are the same. Now in a perfect world, our walls would all be square and straight. Unfortunately, that doesn't always happen. So we're actually going to take two measurements on the width of our tread to ensure we get a precise cut. The first measurement will be on the back of the stair, okay. And the next one will be on the front. And we can cut accordingly. All right, let's go cut a stair tread. All right, let's cut our first tread. Now to do this, we are going to use a compound miter saw. Fortunately for us, the depth of our stairs match perfectly with the depth of our tread. So we don't need to make any cuts there. And if you do, use a circular saw to cut all the way down so that it fits your stairs perfectly. Now you'll recall I made two measurements on the width, the back and the front. Now I should note, when we measure the width of our stairs, the front and the back measurements were actually the same. So we just need to make one cut. And I also should note, whenever you are making a cut, you want to cut just to the outside of your measurement. And you want to do this because you want to give yourself a little bit of wiggle room if you need to make some adjustments afterward. Let's cut our width. All right, let's measure and mark the rest of our treads and get them cut.

Auto-generated transcript. May contain errors.