Skip to main content

Rinse and Extract with Carpet Cleaner — Rinse Stairs (Optional but Recommended)

Beginner4 hours

Part of project

How to Use a Carpet Cleaner on Stairs · Step 7 of 9

Helpful?

In this video

Once the pre-treatment has had sufficient dwell time, fill the clean water tank of your carpet cleaning machine with only plain water. Do not add any more cleaning solution to the machine. Pass the carpet cleaner over the pre-treated areas. The goal is to rinse out not only the dirt and grime that the pre-treatment has loosened but also any residual cleaning solution. If cleaning solution is left behind, it can dry sticky and attract dirt more quickly, leading to faster re-soiling. If your machine has a 'dry only' function, utilize it to pull out as much moisture from the carpet as possible, which will significantly reduce drying time.

110.4K views5.6K
Transcript
Hide

Now, once the cleaner has sat on the carpet for about 10 to 15 minutes, it's time to rinse and flush everything out. And usually, this is the best part of the clean. That's the most satisfying, my favorite. But to do this, there are a few things I like to recommend. Now, the machine that you're using, just put water only in the tank because our goal here is to rinse everything, not only the dirt and grime, but also the cleaner because if we leave any cleaner behind, it can dry sticky and attract more dirt and we don't want that. The second thing is use a carpet cleaning machine that has a dry only function because once everything's rinsed out, you want to make sure to pull out as much of the moisture that you put down out of the carpet as well because we want it to dry fast. Speaking of dry time, once you're done running the machine,

Auto-generated transcript. May contain errors.