Skip to main content

Apply Flashing Tape to Sill

Beginner2 mins

Part of project

Window Installation · Step 2 of 8

Helpful?

In this video

Measure and cut a piece of DuPont flexible flashing tape long enough to span the bottom sill of the window opening and extend approximately 6-8 inches up each side jamb. Carefully peel off the backing of the flashing tape and adhere it to the bottom sill. Ensure the tape is folded neatly over the edge of the sill to create a continuous seal. Press down firmly on the tape to eliminate any air bubbles and ensure strong adhesion, especially in the corners and along the edges. Apply a second piece if necessary to fully cover any exposed wood on the sill, overlapping the first piece slightly.

139.3K views2.3K

FAQs

What are the most important safety precautions to take during window installation?

Always wear safety glasses and gloves to protect against debris, sharp edges, and sealant. If working above the ground floor, use appropriate ladders or scaffolding safely. Be sure to have help to lift and position the window, as they can be heavy and awkward, preventing injury or damage.

Beyond the listed tools, what other essential supplies might a beginner need for a successful and weatherproof window installation?

You will definitely need shims (wood or plastic) to properly level and plumb the window within the rough opening. A utility knife with extra blades for cutting flashing tape, and a caulking gun for applying sealant are also crucial for a clean, professional finish.

What are common mistakes beginners make when flashing and sealing a new window that could lead to leaks?

A common mistake is not applying flashing tape in the correct shingle-fashion, which can trap water. Another is using too little sealant or not ensuring a continuous bead, leaving gaps for water intrusion. Always overlap flashing layers from bottom to top and apply sealant generously to critical areas.

Is a 2-day estimated time realistic for a beginner installing a window, and what factors could extend it?

The 2-day estimate can be realistic for a beginner with a standard-sized window and a clean rough opening. However, unexpected issues like discovering rot in the rough opening, dealing with an out-of-square frame, or struggling with the weight of the window can easily extend the project time.

Transcript
Hide

inch and it's definitely heavy built so what you want to do we want to make sure we get a long enough piece to go up the side of the window opening and enough to cover over the lip here and it's going to fold over the edge so we're just going to dry fit it here all right so looks like right in this region looks good so this stuff's really easy to cut like I said it's kind of like cutting rubber so all right so here's our piece of flashing and this stuff is very very sticky like said and it just peels off like tape so we'll go ahead and get it started and we stick it up the sides right just kind of want to fold it into that crease make sure it's nice and tight and some people don't do this but again you definitely should now I agree when the people say all I don't do it because I install the siding and the siding keeps all the weather out which is true if you install the siding correctly but some people do not install their siding correctly or the subcontractors don't do it correctly so whoa it's a little slick right there all right so you just want to get it folded in there nice and tight and just make sure you fold it over the edge here stuff is very very sticky all right so something like that it doesn't have to be perfect but now as you can see we have a little bit of wood exposed right here so need get another piece to follow that same pattern so again we're going to dry fit it get our length and this

Auto-generated transcript. May contain errors.