Skip to main content

Test Evaporator Fan Motor Operation — Test Evaporator Fan Motor

Intermediate6 hours

Part of project

Refrigerator Repair · Step 5 of 10

Helpful?

In this video

To quickly test the evaporator fan motor, open the freezer door. Normally, the fan should turn off when the door is open. To simulate the door being closed, press the door switch (often found in the door frame). With the switch held down, listen or look into the compartment to ensure the fan motor is running. If the fan is not running, further testing with a voltmeter is needed to confirm it is receiving adequate power, which will help determine if the fan motor itself has failed.

287.4K views3.2K

FAQs

What is the most critical safety precaution I must take before attempting any refrigerator repair?

Always unplug the refrigerator from its power source before starting any inspection or repair, even for simple tasks like cleaning condenser coils. This prevents serious electrical shock and ensures your safety throughout the process.

Is a multimeter truly necessary for basic refrigerator troubleshooting, or can I skip it to save on tools?

A multimeter is highly recommended and almost essential for accurately diagnosing electrical components like fan motors, thermostats, and start relays. It helps confirm if a part is faulty, preventing unnecessary purchases and ensuring you address the correct problem.

My refrigerator isn't cooling properly. What are some common DIY fixes for this, and what's their difficulty level?

Often, cooling issues are due to dirty condenser coils or a malfunctioning evaporator or condenser fan. Cleaning coils is an intermediate DIY task, crucial for efficiency. Testing and replacing a fan motor, also intermediate, requires careful handling of electrical connections.

The project suggests an estimated time of 6 hours. Does this include diagnosing the problem, or just the hands-on repair work?

The 6-hour estimate typically covers both diagnosing common issues and performing the subsequent repair. Be prepared to allocate sufficient time for initial checks, component testing, and potential trips for parts if replacements are needed.

Transcript
Hide

To quickly test if the fan motor is working, open the freezer door. If the door is open, the fan should turn off. Now, depress the door switch to simulate the door being closed. With the switch held down, look or listen to ensure the fan motor is running. If it is not running, the fan motor will need to be tested for voltage to make sure it is getting adequate power, which confirms whether or not the fan motor has failed. Next, let's look at the compressor start relay. The compressor start relay helps send power to the compressor so that it starts and runs properly.

Auto-generated transcript. May contain errors.