<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"
        xmlns:video="http://www.google.com/schemas/sitemap-video/1.1">
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9256-1</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jx-RX80C2iM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Teflon Tape — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Whether you are reinstalling the cleaned old spout or installing a new one, the pipe threads must be prepared. Take a roll of Teflon tape and wrap it around the threads of the pipe that is attached to the spout. Wrap the tape in a clockwise direction, which is the same direction you will tighten the spout. This prevents the tape from bunching up or unwrapping during installation and ensures a tight, waterproof seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jx-RX80C2iM</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9256-2</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qxJJTHaTOZQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal and Install New Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Before installing the new spout, apply silicone caulk around the pipe where it exits the wall to create a primary waterproof seal. Next, wrap the exposed threads of the pipe nipple with new Teflon tape. Align the new spout and hand-thread it clockwise onto the pipe until it is snug against the wall and oriented correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qxJJTHaTOZQ</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9256-3</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bkZLAeTSYFQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Seal — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Clean up the area around the newly installed tub spout, removing any debris or residue. Turn on the water to test the spout and check for leaks. If leaks are detected, slightly tighten the Allen screw, if necessary.  Once the new spout is functioning correctly, apply a bead of silicone caulk around the base of the spout where it meets the wall or tub. This prevents water from seeping behind the tile or wall surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bkZLAeTSYFQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9252-1</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AFva0gSHzjo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unscrew and Remove the Heated Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>After heating the spout, turn off the torch and place it safely out of the way. The spout is now extremely hot. To handle it safely, wrap a thick, dry towel around the spout. Grip it firmly through the towel and begin twisting it counter-clockwise. The heat should have loosened it enough that it can be unscrewed by hand without needing tools or excessive force. Continue twisting until the spout is completely removed from the copper pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AFva0gSHzjo</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9252-2</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cP_KCmfsqvk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Faucet Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Locate the small grub screw at the back of the faucet body that secures the spout. Use a 2.5mm Allen key to turn the screw counter-clockwise to loosen it. It&apos;s not necessary to remove the screw completely. Once loosened, firmly grip the spout and pull it straight up to remove it from the faucet base. Have a cloth handy as some water will drain from the spout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cP_KCmfsqvk</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9252-3</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u4u2RlBuAiY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Tub Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Examine the tub spout to determine its attachment method. Look on the underside of the spout for a small hole containing a set screw. If a set screw is present, use an Allen wrench to loosen it by turning it counter-clockwise. With the screw loosened, the spout can be slid directly off the copper pipe. If no set screw is found, the spout is likely threaded and must be unscrewed from the pipe by turning the entire spout counter-clockwise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u4u2RlBuAiY</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9251-1</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VT6m9zJ-yjA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete the Removal — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Once the drain flange has been sufficiently loosened with the wrench, you can typically unscrew it the rest of the way by hand. Lift the flange and the attached removal tool out of the bathtub. Remove the temporary plastic bag from the drain opening to complete the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VT6m9zJ-yjA</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9251-2</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lzm2otoIkEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Before starting, gather all the necessary tools and supplies. This includes a new pop-up drain assembly, a tub drain removal tool, channel-lock pliers, Phillips and flathead screwdrivers, and a container of plumber&apos;s putty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lzm2otoIkEc</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9251-3</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bJCd4MCbmfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Drain Stopper Assembly — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Move to the drain opening at the bottom of the tub. Install the decorative drain flange. Secure the flange to the drain ell below the tub using the appropriate nut and a screwdriver or drain tool to tighten it. Once the flange is secure, insert the drain stopper into the drain opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bJCd4MCbmfI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9254-1</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wt0UR1zQZe0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Teflon Tape (for Screw-on Type) — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>If you are installing a screw-on tub spout, wrap the threads of the pipe coming from the wall with Teflon tape. Wind the tape in a clockwise direction 3-4 times to ensure a tight, waterproof seal when the new spout is screwed on. This step is not necessary for slip-on spouts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wt0UR1zQZe0</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9254-2</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OUsS7FYkpvg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Locate the set screw on the underside of the new spout. Insert the correct size Allen wrench into the screw and turn it clockwise to tighten. Continue tightening until the spout is held securely in place on the pipe and does not wobble or rotate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OUsS7FYkpvg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9254-3</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jx-RX80C2iM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Teflon Tape — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Whether you are reinstalling the cleaned old spout or installing a new one, the pipe threads must be prepared. Take a roll of Teflon tape and wrap it around the threads of the pipe that is attached to the spout. Wrap the tape in a clockwise direction, which is the same direction you will tighten the spout. This prevents the tape from bunching up or unwrapping during installation and ensures a tight, waterproof seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jx-RX80C2iM</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9253-1</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kOXoM77EnwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>The first step is to remove the old, faulty diverter spout. Locate the small set screw on the underside of the spout. Using an Allen wrench or a small screwdriver, turn the screw counter-clockwise to loosen it. It does not need to be completely removed. Once loosened, firmly pull the spout straight forward, away from the wall, to slide it off the copper pipe. Be aware that some water trapped in the shower pipe may spill out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kOXoM77EnwE</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9253-2</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r-2artN3X9U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Tub Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>First, identify how the tub spout is attached. Some have a set screw (Phillips, standard, or Allen head) on the underside that must be loosened. The spout in the main demonstration is a screw-on type. To remove it, wrap a towel around the spout for a better grip, then twist it counter-clockwise while pulling away from the wall until it is completely unscrewed from the copper pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r-2artN3X9U</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9253-3</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4mQN6lZPb8g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>For a slip-on spout, use the appropriate tool, such as an Allen key or a screwdriver, to loosen the set screw located on the underside of the spout. You do not need to remove the screw completely. Once loosened, the spout should slide straight off the copper pipe. If it is a threaded model, grip the spout firmly and turn it counter-clockwise to unscrew it from the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4mQN6lZPb8g</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9255-1</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eBjakLbn49c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Installing the new spout is a straightforward process. First, ensure the brass adapter and its O-ring on the wall pipe are clean and undamaged. For a better seal, apply a light coat of silicone-based plumber&apos;s grease to the O-ring. Align the new spout with the adapter and slide it on firmly until it sits flush against its base plate. Then, rotate the body of the tub spout clockwise to thread it onto the base, which will pull it tight against the wall. If there is a set screw, tighten it to secure the spout. Finally, turn on the water to check for any leaks around the base and test the diverter&apos;s function.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eBjakLbn49c</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9255-2</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qxJJTHaTOZQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal and Install New Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>Before installing the new spout, apply silicone caulk around the pipe where it exits the wall to create a primary waterproof seal. Next, wrap the exposed threads of the pipe nipple with new Teflon tape. Align the new spout and hand-thread it clockwise onto the pipe until it is snug against the wall and oriented correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qxJJTHaTOZQ</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9255-3</loc>
    <lastmod>2026-10-07T14:16:50.158Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1ohbG4i4T2A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Tub Spout — How to Replace a Leaky Bathtub Spout (Thread-on vs. Slip-on)</video:title>
      <video:description>To create a waterproof barrier, a generous bead of silicone caulk is applied around the copper pipe where it exits the shower wall. The chrome tub spout is then carefully slid onto the pipe until its base is flush against the wall, compressing the caulk. Finally, an Allen wrench is used to tighten the set screw located on the underside of the spout, locking it securely onto the copper pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1ohbG4i4T2A</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-07T14:16:50.158Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9225-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F4SKwTKdzMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water and Prepare the Sink — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Before starting any work, locate the hot and cold water shutoff valves under the sink. Turn the valve handles clockwise or until they are perpendicular to the water lines to stop the water flow. Return to the faucet and lift the handle to drain any remaining water and relieve pressure in the lines. It is also highly recommended to close the sink&apos;s pop-up drain to catch any small parts that might be dropped.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F4SKwTKdzMY</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9225-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tYyx-wvN6z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Water Shut-off — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>The first step is to prepare the work area and ensure the water is turned off. Access the main shut-off valves for the sink, which are located behind a small access door in the cabinet. Turn the valves to the off position to stop the flow of water to the copper stub-outs. Place cardboard or towels on the cabinet floor to protect the surface and absorb any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tYyx-wvN6z4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9225-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IpnqjuETicw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Work Area and Shut Off Water — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Clear out the cabinet space under your sink to ensure you have enough room to work and install all system components. Locate the cold water supply valve, typically found on the wall under the sink, and turn it clockwise to shut off the water supply. Next, open the cold water handle on your main kitchen faucet to release any remaining water and pressure from the line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IpnqjuETicw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9228-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xk1iW4gvtF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply Lines — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Connect the integrated hot and cold water supply lines from the faucet to the corresponding angle stop valves on the wall. The hot line is typically marked with a red indicator. Thread the connections on by hand first to prevent cross-threading. Then, use an adjustable wrench or finish pliers to give each connection a final quarter-turn to ensure a snug, leak-free seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xk1iW4gvtF8</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9228-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hp5xMamrtwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Plumbing Lines — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Connect the flexible water supply lines from the faucet tails to the corresponding hot and cold shutoff valves on the wall. Hand-tighten the connections first, then give them a slight additional turn with a wrench. Next, connect the P-trap. Attach the top of the P-trap to the sink&apos;s drain tailpiece and the other end to the drain pipe in the wall. Tighten all the slip nuts on the P-trap connections, ensuring any washers are correctly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hp5xMamrtwQ</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9228-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I4JXHUmriLY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Plumbing Lines — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Connect the hot and cold water supply lines from the faucet to the corresponding shutoff valves on the wall. Hand-tighten the connections, then use pliers to give them a final quarter-turn. Next, connect the P-trap assembly to the sink&apos;s drain tailpiece and the drain pipe in the wall. Ensure all slip-joint nuts are tightened securely to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I4JXHUmriLY</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9229-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dQpPEudltI8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water and Check for Leaks — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Slowly turn on the shut-off valves for both hot and cold water by turning the handles to the left (counter-clockwise). Turn on the faucet and let the water run. Close the pop-up drain to fill the sink partially, then release it to test the drain connection under a full flow. Use a flashlight to carefully inspect all new plumbing connections, including the supply lines and the entire P-trap assembly, for any drips or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dQpPEudltI8</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9229-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QmzwbM9SNWY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Test — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Turn the water shut-off valves counter-clockwise to restore the water supply. Test the faucet handles and check the faucet from above to ensure it is stable. Finally, inspect the connections under the sink for any signs of leaking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QmzwbM9SNWY</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9229-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KguLfUVFXqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Testing the Installation — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Slowly turn the water back on at both the hot and cold shut-off valves. Carefully inspect all connection points—at the base of the faucet and at the shut-off valves—for any signs of leaks. Use a flashlight and a dry paper towel to help spot drips. Once you&apos;ve confirmed there are no leaks, turn the faucet handle to test both hot and cold water flow and check that the faucet operates smoothly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KguLfUVFXqU</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9231-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/49a27LKG4kI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Surfaces — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Before applying the plumber&apos;s putty, it is essential to prepare the contact surfaces. Using a clean cloth, thoroughly wipe down both the flange of the drain fitting and the area around the sink&apos;s drain hole. Ensure both surfaces are completely clean, dry, and free of any old putty, dirt, or debris to guarantee a proper seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/49a27LKG4kI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9231-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q053fJgRcPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Excess Putty — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>With the faucet securely mounted, the presenter cleans up the excess plumber&apos;s putty that has squeezed out from under the base. He uses a small spatula to carefully scrape it away and then wipes the area with a paper towel. He follows up by spraying the entire faucet and surrounding countertop with a cleaner and wiping it down to leave a clean, finished appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q053fJgRcPM</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9231-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/28RKQkxciDs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Pipe — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Once the old spout is removed, thoroughly prepare the area for the new installation. Use a razor blade or utility knife to carefully scrape away any old caulk or residue from the tile surface around the pipe. Next, take plumber&apos;s mesh and scrub the copper pipe to remove any corrosion or buildup. Finally, use a wire brush to clean the threads at the end of the pipe, ensuring they are free of any debris or old sealant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/28RKQkxciDs</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9226-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9XBYxHYWEhk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Loosen the lift rod nut and disconnect the pop-up assembly from the faucet underneath the sink. Remove the mounting nuts securing the faucet to the sink using a basin wrench if necessary. Lift the old faucet straight up and out of the sink. Clean the sink surface where the old faucet was mounted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9XBYxHYWEhk</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9226-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IYEIO8_PDhA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen the Spout Mounting Nut — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Go underneath the sink to access the faucet&apos;s mounting hardware. Identify the large nut that secures the base of the spout to the countertop. Position the jaws of the basin wrench around this nut. Turn the wrench handle counter-clockwise to loosen the nut. You only need to loosen it enough for the spout to be moved from above; do not remove it completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IYEIO8_PDhA</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9226-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eCEOj5R0Rhs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Faucet — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Disconnect the lift rod mechanism from the back of the drain pipe. Then, use a basin wrench to reach up behind the sink and unscrew the mounting nuts holding the faucet in place. Once the nuts are off, lift the entire faucet assembly up and out of the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eCEOj5R0Rhs</video:player_loc>
      <video:duration>133</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9227-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PaMasBhANcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the New Faucet — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Unpack the new faucet and its components from the box. Take the flexible hot and cold water supply lines and hand-thread them into the corresponding ports on the base of the faucet. Next, slide the rubber base gasket over the supply lines and seat it firmly against the faucet base. Take the threaded mounting stud from the hardware bag, insert it into its hole on the faucet base, and use a screwdriver to tighten it until it is secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PaMasBhANcM</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9227-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2Zh0kWo3twU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount New Sprayer — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Take the new sprayer base and apply a 1/4-inch bead of plumber&apos;s putty to its underside edge to create a watertight seal. Place the new base into the hole on the sink deck, pressing it down firmly. From underneath the sink, slide the friction washer onto the tailpiece of the sprayer base and then screw on the new mounting nut to secure it. Go back to the top and use a putty knife or your finger to wipe away any excess plumber&apos;s putty that squeezed out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2Zh0kWo3twU</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9227-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M1d_puqCq3A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble New Faucet — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Before placing the sink in the countertop, pre-assemble the faucet components. Install the pop-up drain assembly into the sink&apos;s drain hole. Apply a rope of plumber&apos;s putty under the flange of the spout and each handle stem, then insert them through the holes in the sink. From underneath, tighten the mounting nuts. The faucet handles have flat sides on the mounting base that allow you to use an adjustable wrench for final tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M1d_puqCq3A</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9230-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LH31SXzoJ6A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect the Hot Water Line — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Place a bucket underneath the connection to catch any drips. Using an adjustable wrench, carefully loosen the compression nut that connects the hot water supply line to the shutoff valve by turning it counter-clockwise. Once it&apos;s loose, you can finish unscrewing it by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LH31SXzoJ6A</video:player_loc>
      <video:duration>150</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9230-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1Lmj2XH33xM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Faucet — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Go under the sink and turn off the hot and cold water supply by turning the shut-off valve handles clockwise until they stop. Place a towel underneath to catch drips. Use an adjustable wrench to loosen the nuts connecting the old supply lines to the valves. Once loosened, unscrew them by hand. Then, use channel-lock pliers to loosen the large mounting nut securing the old faucet. After it&apos;s loose, finish unscrewing it by hand and remove it along with any washers. Pull the old faucet up and out of the countertop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1Lmj2XH33xM</video:player_loc>
      <video:duration>100</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9230-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tcy3AkEX6nI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Water Supply Lines — How to Replace a Two-Handle Kitchen Faucet</video:title>
      <video:description>Using an adjustable wrench, carefully loosen the nuts connecting the flexible water supply lines to the shutoff valves. Hold the valve with one hand or another wrench to prevent it from twisting. Once the nuts are loose, unscrew them by hand and pull the lines away from the valves, directing any draining water into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tcy3AkEX6nI</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8989-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TRYwjtrJ3vA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Tank and Old Parts — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Once the bolts are removed, carefully lift the toilet tank straight up and off the bowl. Be mindful that it might be heavier than it looks. Place the tank on a towel on the toilet seat or on the floor to work on it. This is a good time to clean the area on the bowl where the tank was sitting. Remove the old, large gasket from the bottom of the tank&apos;s flush valve outlet and pull out the old bolts from inside the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TRYwjtrJ3vA</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8989-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dQ4qEjaoeeA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flush Valve and Gasket — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>With the tank removed, unscrew the large locknut holding the old flush valve and remove it. Install the new flush valve assembly, ensuring its gasket is seated inside the tank. Secure it by tightening the new locknut on the outside. Then, slide the new, thick tank-to-bowl gasket over the exterior locknut, pressing it firmly into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dQ4qEjaoeeA</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8989-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NjH-eCdk9Rs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Flush Valve and Clean Tank — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>With the tank removed, take off the large nut on the underside that secures the flush valve assembly. A large pipe wrench may be needed if it&apos;s corroded. Once the nut is off, the entire old flush valve assembly can be lifted out from inside the tank. Also, remove the old tank bolts and the large, grimy tank-to-bowl gasket. Clean the area around the flush valve opening and the bolt holes on the tank with a cleaner and paper towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NjH-eCdk9Rs</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8987-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HMaKGJ4WYTA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Toilet Tank — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Unscrew the water supply line from the bottom of the toilet tank&apos;s fill valve. Remove the toilet tank lid and set it aside in a safe place. Using a screwdriver with a nut driver bit, reach under the toilet bowl and loosen the nuts securing the tank to the bowl. Once the nuts are removed, carefully lift the tank straight up and off the bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HMaKGJ4WYTA</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8987-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Of_Egq2pGBc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Toilet Tank — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Begin by preparing the toilet for disassembly. If you haven&apos;t already, turn off the water supply valve located behind the toilet. Flush the toilet to drain the tank, and use towels to soak up any remaining water. Disconnect the water supply line from the fill valve at the bottom of the tank. Using a screwdriver, loosen and remove the nuts from the bolts that secure the tank to the bowl. Once the nuts are off, carefully lift the tank straight up and away from the bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Of_Egq2pGBc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8987-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9oPX28EGr5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>First, turn off the water supply to the toilet and flush it to empty the tank. Use a sponge or towel to remove any remaining water. Disconnect the water supply line from the fill valve. Locate the two bolts underneath the tank that secure it to the bowl. Use a deep socket wrench (a 1/2 inch was used here) to unscrew the nuts from these bolts. Carefully lift the tank off the bowl and move it to a work area like a garage or workbench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9oPX28EGr5w</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8988-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q7eEJvh7-2I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Water and Test for Leaks — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Reconnect the water supply line to the toilet tank fill valve, hand-tightening it plus a quarter turn with pliers if necessary. Slowly turn the water shut-off valve counter-clockwise to turn the water back on. The tank will begin to fill. Check for any leaks at the supply line connection and around the base of the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q7eEJvh7-2I</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8988-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xe_OyOOlNG4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Water Supply and Test — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>The final step is to reconnect the water supply. Screw the water supply line connector back onto the bottom of the new fill valve, tightening it clockwise by hand. Once secure, slowly turn the water shut-off valve counter-clockwise to turn the water back on. The tank will begin to fill. Check for any leaks around the fill valve and supply line connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xe_OyOOlNG4</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8988-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/O1TfmFBNOWk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Water and Test Operation — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Reconnect the water supply line to the new fill valve, hand-tightening first and then giving it a slight turn with a wrench if needed. Turn the water supply valve back on by turning it counter-clockwise. Watch the tank fill to ensure water flows correctly and stops at the appropriate level. Check for leaks at the base of the tank. Finally, press the flush button to test the full operation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/O1TfmFBNOWk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8985-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IqeoINJfrFU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Tank — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Begin by turning off the water supply to the toilet. The shut-off valve is typically located on the wall behind or next to the toilet. Turn the valve clockwise until it stops. Next, flush the toilet and hold the flush lever down to drain as much water as possible from the tank. Place a sponge or towel on the floor below the connections to catch any remaining water drips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IqeoINJfrFU</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8985-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mzgvPAQaSs8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Toilet — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Locate the water shutoff valve, typically on the wall behind the toilet, and turn the handle clockwise until it stops to turn off the water supply. Then, carefully remove the heavy ceramic tank lid and place it on a soft, safe surface, like a towel, to prevent damage. Flush the toilet to drain most of the water out of the tank, making the next steps cleaner and easier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mzgvPAQaSs8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8985-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TAEwudpeQFo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Toilet for Removal — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Begin by shutting off the water supply to the toilet using the shut-off valve located on the wall or floor behind the toilet. Turn the handle clockwise until it stops. Disconnect the water supply line from the bottom of the toilet tank. Remove the tank lid and flush the toilet to empty most of the water from the tank and bowl. Use a large, absorbent sponge to soak up any remaining water from both the tank and the bowl, wringing it out into a bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TAEwudpeQFo</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8986-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZruZZ06lkp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Water Supply Line — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Place a towel on the floor under the toilet tank connection. Unscrew the water supply line connector from the bottom of the toilet tank&apos;s fill valve by turning it counter-clockwise. If the connection at the shut-off valve is old, you may need to use pliers to loosen and disconnect it as well, though the video only shows disconnecting the line from the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZruZZ06lkp0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8986-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UhVpipC0BEw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Fill Valve — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Place a bucket or towels under the tank to catch any remaining water. Unscrew the water supply line coupling nut from the bottom of the fill valve shank. Next, unscrew the large plastic locknut that secures the fill valve to the tank. Once the nut is removed, you can lift the entire old fill valve assembly straight out of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UhVpipC0BEw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8986-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MPPJMOr8mjE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Fill Valve — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Place a towel on the floor beneath the tank connection to catch drips. Unscrew the water supply line connector from the bottom of the fill valve shank by turning it counter-clockwise. Then, unscrew the large plastic locknut that secures the fill valve to the tank. If it&apos;s too tight, use an adjustable wrench to loosen it carefully. Once the nut is removed, lift the entire old fill valve assembly out from inside the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MPPJMOr8mjE</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8990-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8G-hBeTnVo8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Toilet Tank — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Carefully place the tank back onto the toilet bowl, guiding the tank bolts through the corresponding holes in the bowl. From underneath, place the washers and hand-tighten the nuts onto the bolts. Use a wrench to tighten the nuts, alternating between the left and right side to apply even pressure. Be careful not to overtighten, as this can crack the porcelain. The tank should be stable and not wobble. Reconnect the water supply line to the fill valve and hand-tighten, then give it a final quarter-turn with a wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8G-hBeTnVo8</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8990-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hcVJkh1IkYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Tank and Connect Water — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Carefully lift the tank and place it back onto the toilet bowl, guiding the bolts through the corresponding holes in the bowl base. From underneath, attach the washers and nuts to the bolts and tighten them evenly and alternately to secure the tank. Do not overtighten, as this can crack the porcelain. Once the tank is secure, reattach the water supply line to the fill valve connection and hand-tighten, giving it a slight turn with pliers if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hcVJkh1IkYI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8990-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dG8YJjNu78Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Tank and Connect Water — How to Fix a Leaking Toilet Tank-to-Bowl Gasket</video:title>
      <video:description>Carefully place the refurbished tank back onto the toilet bowl, aligning the new tank bolts with the holes in the bowl. From underneath, install the washers and nuts onto the bolts. Tighten the nuts alternately and evenly until the tank is secure and does not wobble. Reconnect the water supply line to the new fill valve. Turn the water supply back on using the shut-off valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dG8YJjNu78Q</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8971-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kIL0D6unmAs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Refill and Restart Water Heater — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>With the new valve installed and closed, you can restore utilities. First, open the cold water intake valve to allow the tank to refill. Remember to close the hot water faucet you opened earlier. Once the tank is full, turn the gas supply back on. Finally, plug the power cord back into the outlet. Your water heater is now ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kIL0D6unmAs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8971-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Suf9o2w5ilw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Power — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>With the pressure relief valve closed, turn your water supply back on. Go back inside and open the hot water faucet again. Let it run until all the air sputters out and you have a steady stream of water. This confirms the water heater tank is full again. Once full, you can turn the water heater&apos;s power back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Suf9o2w5ilw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8971-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xLaPVWnx728/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restart the Water Heater — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>With the tank now clean, fully open the cold water supply valve to refill the tank. Go to the faucets you opened earlier and let them run until water flows steadily without any hissing or sputtering, which indicates all the air has been purged from the system. Once the tank is full and the air is purged, turn the gas control knob back to the &apos;PILOT&apos; position and relight the pilot light according to the manufacturer&apos;s instructions. Finally, turn the knob to the &apos;ON&apos; position and set your desired temperature. Your water heater is now back in service.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xLaPVWnx728</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8976-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrYKP7NTS_A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the water heater — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>First, locate and turn off the cold water supply valve leading to the water heater. Attach a garden hose to the drain valve at the bottom of the tank and run the other end of the hose to a safe drainage area, such as outside or into a floor drain. To allow air into the tank so it can drain, open a hot water faucet somewhere in the house or flip the lever on the temperature and pressure relief valve (T&amp;P valve) to the open position. Finally, open the drain valve, often using a flathead screwdriver to turn the knob, and let the tank drain completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrYKP7NTS_A</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8976-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qAGFZ_5jX5U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove T&amp;P Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Using a pipe wrench, carefully grip the Temperature and Pressure (T&amp;P) relief valve located on the upper side of the water heater tank. Turn it counter-clockwise to unscrew and remove it completely from the tank. Place some towels or a bucket underneath to catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qAGFZ_5jX5U</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8976-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KoXCMH_xnCQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Drain Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>With the old valve removed and water gushing out, quickly take the new drain valve. Align its threads with the opening on the water heater tank and immediately begin screwing it in clockwise by hand. You must work quickly against the flow of water. Continue to tighten it as much as possible by hand until the flow of water stops or is reduced to a small drip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KoXCMH_xnCQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8973-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SPnDeBwKkQI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Install New Brass Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Prepare the new brass drain valve for installation. As shown in the video, wrap the male threads of the new valve with Teflon tape. Wind the tape clockwise 3 to 4 times to ensure it seals properly when screwed in. Carefully thread the new brass valve into the tank opening by hand to prevent cross-threading. Once hand-tight, use your wrench to tighten it another one to two full turns until it is snug and pointing downwards. Do not over-tighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SPnDeBwKkQI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8973-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kf4Tt5xNeuo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Hand-Install New Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Gather your new quarter-turn shut-off valve and thread sealant, like Teflon tape. Wrap the Teflon tape clockwise around the male threads of the water pipe (not the valve itself). Three to four wraps are usually sufficient. Once the threads are prepared, take the new valve and begin screwing it onto the pipe by hand, turning it clockwise until it becomes finger-tight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kf4Tt5xNeuo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8973-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U7eRkan8JzU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Valve Connections — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Prepare the male threaded connectors by wrapping them with Teflon tape in a clockwise direction. Screw these prepared connectors into the corresponding hot water inlet, cold water inlet, and all water outlet ports on the brass shower valve body. Ensure they are tightened securely to create a proper seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U7eRkan8JzU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8970-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9I8WI4vDTzY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Shutoff Valves — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Wrap the threads of the floor pipes with blue thread sealant tape to ensure a watertight connection. Hand-tighten the new shutoff valves onto the pipes, then use a pipe wrench to fully secure them in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9I8WI4vDTzY</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8970-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QbliTlDsi08/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Threads and Install New Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>First, clean the male pipe threads where the old valve was connected. Apply a layer of pipe thread sealant (pipe dope) followed by several wraps of Teflon tape in a clockwise direction. Take the new pressure reducing valve and note the directional arrow stamped on its body. Ensure this arrow points in the direction of water flow. Thread the new valve onto the prepared pipe and use two wrenches—one to hold the valve and one to turn the fitting—to tighten it until it is secure and properly aligned.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QbliTlDsi08</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8970-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5bQ-iMya9pw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Shut-Off Valves — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Install new shut-off valves. Apply pipe dope or Teflon tape to the threads of the new shut-off valves. Tighten the valves securely using an adjustable wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5bQ-iMya9pw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8972-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4frZGpH3erQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Heater — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>To relieve pressure and allow the tank to drain, open a hot water faucet somewhere in the house. Attach a garden hose to the drain valve at the bottom of the water heater and route the other end to a floor drain or outside. Open the drain valve to allow water to empty from the tank. You only need to drain it to a level below the element you are replacing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4frZGpH3erQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8972-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/P-HZpZQCBf8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Heater — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Before removing the old element, you must drain the water from the tank. Shut off the cold water supply valve to the heater. Connect a garden hose to the drain valve at the bottom of the tank and run the other end to a floor drain or outside. Open the drain valve. To help the tank drain, open the pressure relief valve on the top or side of the tank and also open the hot water side of a faucet inside the house. This allows air to enter the tank, breaking the vacuum and allowing water to flow out freely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/P-HZpZQCBf8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8972-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i2XU8hSaYY0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the water heater — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>First, turn off the cold water supply valve to the water heater. Attach a garden hose to the drain valve located at the bottom of the tank and run the other end of the hose to a safe drainage area, like outside. Open a hot water faucet somewhere in the house and lift the lever on the temperature and pressure (T&amp;P) relief valve on the water heater to allow air into the tank, which helps it drain faster. Finally, open the drain valve to let all the water empty from the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i2XU8hSaYY0</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8974-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i2XU8hSaYY0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Close the drain valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Close the drain valve on the water heater by turning it fully clockwise. Unscrew and remove the garden hose. Then, ensure the temperature and pressure (T&amp;P) relief valve lever is flipped back down to the closed position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i2XU8hSaYY0</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8974-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7TJBU6YqOQA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Plastic Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Using a pair of channel-lock pliers, carefully grip the body of the old plastic drain valve. Gently apply steady, counter-clockwise pressure to begin unscrewing the valve from the water heater tank. Be extremely careful not to apply too much force or twist at an angle, as old plastic valves can become brittle and snap off. Continue turning until the valve is completely unthreaded and ready to be pulled out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7TJBU6YqOQA</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8974-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KoXCMH_xnCQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Drain Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Position a large bucket or tub directly under the water heater&apos;s drain valve. Begin unscrewing the old drain valve counter-clockwise by hand. If it is too tight, as shown in the video, use a pipe wrench for additional leverage to loosen and continue unscrewing it. Water will start to flow and then gush out as the valve is fully removed. Be prepared to remove the valve completely and manage the strong outflow of water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KoXCMH_xnCQ</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8975-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qAGFZ_5jX5U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove T&amp;P Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Using a pipe wrench, carefully grip the Temperature and Pressure (T&amp;P) relief valve located on the upper side of the water heater tank. Turn it counter-clockwise to unscrew and remove it completely from the tank. Place some towels or a bucket underneath to catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qAGFZ_5jX5U</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8975-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z5ItEW_Ubgw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New T&amp;P Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>After removing the old valve, clean the threads on the tank fitting with a rag or a screwdriver to remove any old pipe dope or mineral deposits. Apply a liberal amount of new pipe sealant or Teflon tape to the threads of the new T&amp;P valve. Hand-thread the new valve into the tank fitting to ensure it is not cross-threaded. Once started correctly, use the pipe wrench to tighten it until it is snug and the outlet is pointing downwards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z5ItEW_Ubgw</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8975-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lQLYz7OyVFQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen and Remove the Old Drain Valve — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Position towels and a bucket or pot directly underneath the old drain valve to catch any water that escapes. Using a pair of channel-lock pliers or a larger pipe wrench if the valve is stuck, turn the valve counter-clockwise to loosen it. Once it&apos;s broken free, continue to unscrew it by hand. Be prepared for a gush of water and sediment as the valve is removed completely. Have the new valve ready to install immediately.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lQLYz7OyVFQ</video:player_loc>
      <video:duration>129</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8969-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vsWsbOjIrB0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Gas and Water Supply — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Before beginning any work, ensure your safety by shutting off the gas supply to the water heater. Locate the gas shut-off valve on the supply line and turn the handle perpendicular to the pipe to close it. Next, find the cold water intake valve, typically located on the pipe leading into the top of the heater, and turn its handle to shut off the water supply.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vsWsbOjIrB0</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8969-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_wibngZTcWs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Power, and Partially Drain the Tank — How to Replace a Water Heater&apos;s T&amp;P Relief </video:title>
      <video:description>Prepare the water heater for the installation. First, shut off the main water supply valve leading to the water heater. Next, turn off the energy source. For an electric water heater, locate its circuit breaker in your home&apos;s electrical panel and switch it to the &apos;off&apos; position. For a gas water heater, turn the gas control valve on the unit to the &apos;vacation&apos; or &apos;pilot&apos; setting. Finally, connect a garden hose to the drain valve at the bottom of the tank and partially drain the water to relieve all pressure inside the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_wibngZTcWs</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8969-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pipZGJH_ifw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Heater Breaker — How to Replace a Water Heater&apos;s T&amp;P Relief Valve</video:title>
      <video:description>Locate your home&apos;s main electrical panel and find the circuit breaker dedicated to the water heater. Switch the breaker to the &apos;OFF&apos; position to cut all power to the unit. This is a crucial safety step to prevent the heating elements from burning out when the tank is drained of water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pipZGJH_ifw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8822-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xhZXk2ow9hw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repressurize and Test System — How to Replace a Well Pressure Tank</video:title>
      <video:description>Once the new PRV is installed, slowly turn the main water shut-off valve back on. Listen for the sound of pipes filling and check carefully for any drips or leaks at the connections you just made. If there are no leaks, open the valve fully. Then, go to a faucet inside the house and open it to bleed all the air out of the lines. Once the air is purged, re-test the water pressure with the gauge to confirm it is at the desired level (factory default is often 50 PSI). Finally, perform the same flow test as in the beginning (running a sink while flushing a toilet) to ensure the problem is resolved.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xhZXk2ow9hw</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8822-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NzPLYh8B90U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water Filter Flushing and Purging — How to Replace a Well Pressure Tank</video:title>
      <video:description>With the unit fully assembled and connected to the pipeline, slowly open the main water inlet valve about halfway. Allow water to run through the system for at least 15 minutes to flush out any carbon fines and air. As the housings fill, press the red pressure relief buttons on top of the bracket to expel trapped air until water begins to spurt out. After flushing, fully open the water valve. Check the pressure gauges to ensure the displayed pressure matches your home&apos;s normal incoming water pressure. The system is now operational.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NzPLYh8B90U</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8822-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JJ5mv7lhyFI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Thermal Expansion Bypass — How to Replace a Well Pressure Tank</video:title>
      <video:description>This test applies to open plumbing systems with a regulator that has a thermal expansion bypass. Close all faucets and trigger the hot water heater to begin a heating cycle. You can do this by briefly running hot water or by temporarily raising the thermostat setting. As the water heats, it expands, causing the pressure to rise. Watch the gauge. The pressure should rise but not exceed the municipal supply pressure by more than 10 PSI. In the video, the pressure rises from the 50 PSI static pressure to 95 PSI, which is only 5 PSI above the 90 PSI municipal pressure, confirming the bypass is working.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JJ5mv7lhyFI</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8829-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wsqg04Aw5FI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Air Pressure in the Pressure Tank — How to Replace a Well Pressure Tank</video:title>
      <video:description>With the system still empty of water, locate the air valve (Schrader valve) on top of the pressure tank and remove its cap. Use a tire pressure gauge to check the current air pressure. The rule of thumb is to set the tank&apos;s air pressure to 2-3 PSI below your desired *cut-in* pressure. Since the new target is a 90 PSI cut-in, the tank needs to be pressurized to about 87-88 PSI. If increasing pressure, use an air compressor with an air chuck to add air to the tank. If decreasing, use the pin on the back of the pressure gauge or a small tool to release air. Add or release air in short bursts, checking the pressure with the gauge after each adjustment until you reach your target pressure. Once set, securely replace the air valve cap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wsqg04Aw5FI</video:player_loc>
      <video:duration>135</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8829-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GV1BLlCjqe4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Inspection and Inaccurate Pressure Check — How to Replace a Well Pressure Tank</video:title>
      <video:description>The presenter introduces the well pressure tank, explaining the importance of maintaining the correct internal air pressure for proper function. He removes the plastic cap from the Schrader valve on top of the tank. He notes the current water system pressure is about 45 PSI on the gauge. He then uses a digital inflator to check the air pressure in the tank, which also reads 45 PSI, demonstrating that checking the air pressure while the tank is full of water is not an accurate method for determining the pre-charge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GV1BLlCjqe4</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8827-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rW_VreLc03c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble and Inspect Inlet Nipple — How to Replace a Well Pressure Tank</video:title>
      <video:description>With the water supply off and the system depressurized, use a pipe wrench or large adjustable wrench to disconnect the flexible water line from the top of the cold water inlet nipple. Once the line is disconnected, carefully use the wrench to unscrew the entire inlet nipple assembly from the threaded port on the top of the water heater tank. Remove it for inspection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rW_VreLc03c</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8827-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dVWeVK2EMMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Valve — How to Replace a Well Pressure Tank</video:title>
      <video:description>With the main water supply shut off, remove the old PRV. Use channel-lock pliers to disconnect any threaded fittings. Use a reciprocating saw or pipe cutters to cut through the PVC pipe on either side of the valve assembly to completely remove it from the water line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dVWeVK2EMMw</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8827-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d6JCr3UcsCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old T&amp;P Valve — How to Replace a Well Pressure Tank</video:title>
      <video:description>First, use a pair of channel-lock pliers to loosen and unscrew the drain line pipe from the outlet of the T&amp;P valve. Once the pipe is disconnected, use a large pipe wrench or adjustable wrench to grip the body of the T&amp;P valve. Turn the wrench counter-clockwise to unscrew the valve from the tank. If the valve is stuck due to corrosion, you may need a cheater bar for additional leverage or apply a penetrating oil to the threads and wait before trying again. Continue unscrewing until the old valve is completely removed from the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d6JCr3UcsCw</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8821-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DwsLtnTI5Ro/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Expansion Tank — How to Replace a Well Pressure Tank</video:title>
      <video:description>After draining the system, use a large pipe wrench to loosen the old expansion tank by turning it counter-clockwise. Be prepared for it to be heavy and for some residual water to spill out. Once broken free, you can typically unscrew it the rest of the way by hand. Carefully lower and remove the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DwsLtnTI5Ro</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8821-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xFZS3g2HGb0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain and Depressurize Section — How to Replace a Well Pressure Tank</video:title>
      <video:description>After isolating the valves, connect a drain hose to a drain port within the isolated section. Open the drain valve to release the remaining water and pressure into a bucket or floor drain. This step is crucial for safely removing the old tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xFZS3g2HGb0</video:player_loc>
      <video:duration>87</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8821-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QCQstRzh6VI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Empty Old Resin — How to Replace a Well Pressure Tank</video:title>
      <video:description>With the help of another person, carefully tip the heavy mineral tank over and pour the old resin, gravel, and water into a large, durable bag or other suitable disposal container. Ensure the bag is placed over the opening to catch the contents as you empty the tank. This can be messy, so it is best done outdoors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QCQstRzh6VI</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8824-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ln8eAlILjbE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repaired Pump — How to Replace a Well Pressure Tank</video:title>
      <video:description>Once the pressure switch has been reassembled and all wiring is secure, restore power to the circuit. Turn on a water spigot to cause the pressure to drop, which should trigger the pump to turn on. Observe the pump as it runs and builds pressure. Listen for a distinct click from the pressure switch as it reaches the cut-off pressure and shuts down the pump. This confirms the new contacts are working correctly and not sticking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ln8eAlILjbE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8824-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LCmo9b4h0vE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Old Switch — How to Replace a Well Pressure Tank</video:title>
      <video:description>With the power off, remove the cover from the old pressure switch. Carefully disconnect the wires leading to the line (power source), load (pump motor), and ground terminals. Take note of or photograph the wiring configuration. Once all wires are disconnected, use a wrench to unscrew the entire old switch assembly from the riser pipe it&apos;s mounted on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LCmo9b4h0vE</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8824-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3w_UmFV1yg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power and Verify — How to Replace a Well Pressure Tank</video:title>
      <video:description>Before beginning any work, locate the pressure switch. Remove the cover by unscrewing the nut on top. Identify the incoming power lines. Go to your electrical panel and switch off the breaker that controls the well pump. Place a piece of tape marked &apos;STOP&apos; over the breaker as a visual reminder. If there is a local disconnect switch, turn that off as well. Return to the pressure switch and use a multimeter to verify that there is zero voltage across the power terminals. This is the most critical safety step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3w_UmFV1yg4</video:player_loc>
      <video:duration>116</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8825-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SISuE9fbsNk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the New Expansion Tank — How to Replace a Well Pressure Tank</video:title>
      <video:description>Before installing the new tank, you must prepare it. First, use a tire pressure gauge to check the air pressure inside the new tank. It should match your home&apos;s static water pressure (the video&apos;s pressure was 40 PSI). Use an air pump to add or release air as needed. Next, clean the male threads on the copper pipe fitting with a wire brush to remove any old Teflon tape or debris. Finally, wrap the female threads of the new expansion tank with several layers of Teflon tape, wrapping in a clockwise direction to ensure it doesn&apos;t unravel when screwed on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SISuE9fbsNk</video:player_loc>
      <video:duration>88</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8825-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/es478xgCHEw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Expansion Tank — How to Replace a Well Pressure Tank</video:title>
      <video:description>Wrap the threads of the new expansion tank with Teflon tape. Carefully lift the new tank into position and screw it into the boiler&apos;s pipe fitting. Since the new tank is empty, it will be much lighter and easier to handle. Tighten it by hand, then use a wrench to secure it, making sure it is snug but not overtightened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/es478xgCHEw</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8825-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GqfIzicJJeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Expansion Tank — How to Replace a Well Pressure Tank</video:title>
      <video:description>Once the new tank is properly pressurized, it&apos;s ready for installation. Wrap the male threads on the new tank with Teflon tape, wrapping in the same direction you will be tightening it (clockwise). This helps create a waterproof seal. Carefully align the tank with the female fitting on the pipe and begin threading it on by hand. Use the body of the tank as a lever to turn and tighten it. Ensure it is very snug to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GqfIzicJJeQ</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8826-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iM8-9x1xMHI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Lines — How to Replace a Well Pressure Tank</video:title>
      <video:description>After the main valve is shut off, go inside the house and open a faucet to drain the remaining water from the pipes. The video shows a bathtub faucet being turned on. Water will flow out initially and then slow to a trickle as the pipes empty. It&apos;s best to open both hot and cold faucets at the lowest point in the house to ensure the system is fully drained, preventing any water from flooding the work area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iM8-9x1xMHI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8826-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NRjdB3y1Iwk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Partially Drain the Water Heater — How to Replace a Well Pressure Tank</video:title>
      <video:description>Attach a garden hose to the drain valve at the bottom of the water heater. Route the other end of the hose to a floor drain or a bucket. Open a hot water faucet somewhere in the house to allow air into the tank, which helps the water drain. Use a flathead screwdriver to open the drain valve and drain approximately half of the water from the tank. This will lower the water level below the pressure relief valve. Once enough water is drained, close the drain valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NRjdB3y1Iwk</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8826-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PGeQwFiii-Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Replace a Well Pressure Tank</video:title>
      <video:description>Locate the main water shut-off valve for your house and turn it completely off. If you are on a well system, this will be near your pressure tank. After the water is off, open faucets at the highest and lowest points in the house to drain as much water as possible from the plumbing lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PGeQwFiii-Y</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8828-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/n9OZecInXv8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare New Tank and Fittings — How to Replace a Well Pressure Tank</video:title>
      <video:description>Lay the old tank on its side and use wrenches to remove the copper pipe fitting assembly. On the new tank, remove the protective plug from the threaded outlet. Apply pipe thread sealant liberally to the male threads of a new 1-1/4 inch to 1-inch reducer adapter. Thread the adapter into the new tank and tighten it securely with wrenches. Then, apply sealant to the threads of the old copper pipe assembly and thread it into the newly installed adapter, tightening it firmly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/n9OZecInXv8</video:player_loc>
      <video:duration>117</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8828-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QWhqmYvio4c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Re-install Tank and Connect Water — How to Replace a Well Pressure Tank</video:title>
      <video:description>Carefully place the rebuilt tank onto the bowl, guiding the bolts through the holes. Apply downward pressure on the tank and hand-tighten the nuts underneath. Then, use pliers to tighten each nut alternately, a little at a time, until the tank is stable and does not wobble. Reconnect the water supply line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QWhqmYvio4c</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8828-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dQ4qEjaoeeA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Tank on Bowl — How to Replace a Well Pressure Tank</video:title>
      <video:description>Carefully place the tank back onto the toilet bowl, aligning the tank bolts through the holes in the bowl. Ensure the tank is level. From underneath, attach the washers and nuts to the bolts. Tighten the nuts by hand first, then use a wrench to snug them up, alternating between each side to apply even pressure. Reconnect the water supply line to the new fill valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dQ4qEjaoeeA</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8820-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FVUC85UOfFM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power and Ensure Safety — How to Replace a Well Pressure Tank</video:title>
      <video:description>For safety, go to your main electrical panel and turn off the circuit breaker that controls the pool timer. After turning off the breaker, return to the timer and flip the manual switch to confirm the pump does not turn on. For added safety, use a voltage meter to test the terminals and ensure no electricity is present.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FVUC85UOfFM</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8820-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k4mR8lW3Hss/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check the Breaker — How to Replace a Well Pressure Tank</video:title>
      <video:description>The first step is to confirm that the sump pump is receiving electrical power. Locate your home&apos;s circuit breaker panel and find the breaker that controls the sump pump, which should be clearly labeled. Visually inspect the breaker to ensure it is in the &apos;ON&apos; position. If the breaker has tripped and is in the &apos;OFF&apos; or a middle position, flip it completely to the &apos;OFF&apos; position and then firmly back to the &apos;ON&apos; position to reset it. After confirming the breaker is on, you can proceed to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k4mR8lW3Hss</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8820-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LCmo9b4h0vE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Cover and Test Operation — How to Replace a Well Pressure Tank</video:title>
      <video:description>Once all wires are securely connected, neatly tuck them into the housing. Place the cover back on the switch and secure it. Now, you can restore power by turning the circuit breaker back on. The pump should start. If the switch has a low-pressure cutoff lever, you may need to lift it for about 30 seconds to manually engage the pump until pressure builds. Check for any water leaks at the connection point.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LCmo9b4h0vE</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8823-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bQFlZCNDVag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Test — How to Replace a Well Pressure Tank</video:title>
      <video:description>Turn the water supply back on, either at the local shut-off valves or the main valve. Slowly open the valves to avoid water hammer. Check the faucet for any leaks around the handle or from the spout. If there is a leak from the handle, you may need to slightly tighten the bonnet nut. Turn the handles on and off to test the operation and ensure the leak has been fixed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bQFlZCNDVag</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8823-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4lZypQN3C1k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Check for Leaks — How to Replace a Well Pressure Tank</video:title>
      <video:description>Slowly turn the water back on at the shut-off valve. Use a flashlight to carefully inspect every new connection for any sign of dripping. Run the sink faucet to build pressure and purge air from the lines. Wait several minutes and check all connections again. It is critical to be certain there are no leaks before moving the refrigerator back.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4lZypQN3C1k</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8823-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fgyBGGPBliU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Power — How to Replace a Well Pressure Tank</video:title>
      <video:description>Once all plumbing connections are tight, slowly open both the hot and cold water shut-off valves. Carefully inspect all new fittings and connections for any signs of leaks. Plug the pump&apos;s power cord into a nearby grounded 115V outlet. Turn on the faucet for a moment to purge any trapped air from the system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fgyBGGPBliU</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8817-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yahN-DvUtRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>With everything reconnected, perform a final test. Run the dishwasher on a drain cycle one more time. Check under the sink for any leaks at the hose connection. Go to the sink and listen for the sound of water flowing into the garbage disposal. Visually confirm that water is no longer sputtering or spilling out of the air gap. The presenter gives a thumbs-up, indicating the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yahN-DvUtRA</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8817-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IShKMONMpA4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Operation and Leaks — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>The final step is to test the repair. The technician restores power, turns on the cold water faucet, and activates the garbage disposal. The unit runs smoothly and powerfully. He then uses his flashlight to carefully inspect all the plumbing connections under the sink to confirm there are no leaks from the new installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IShKMONMpA4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8817-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_jeKZo_okwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Test the Disposal — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Mount the reassembled disposal back under the sink. Lift it up and engage the tabs with the sink flange. Turn the mounting ring clockwise to lock it securely in place. Reconnect the main drain elbow and tighten its fittings. Reattach the dishwasher hose and secure its clamp. Once all plumbing is reconnected, plug the unit back into the electrical outlet. Restore power at the circuit breaker. Run water and briefly turn on the disposal to test for proper operation and check for any leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_jeKZo_okwE</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8816-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2rSlGREJdrY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Dishwasher Connection (Optional) — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>If you are connecting a dishwasher drain hose to the disposal, you must remove the knockout plug. Place the disposal on its side. Insert the tip of a screwdriver into the dishwasher drain inlet and gently tap it with a hammer to break the plug loose. Turn the disposal over and use a pair of pliers to reach inside and remove the loosened plastic plug. If you are not connecting a dishwasher, skip this step and leave the plug in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2rSlGREJdrY</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8816-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wo-WKiC2yrQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare New Disposal for Installation — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Before installing the new disposal, prepare it for the dishwasher connection. Locate the knockout plug on the side inlet. Place the tip of a screwdriver on the edge of the knockout and firmly tap it with a hammer to break it loose. Reach inside the disposal&apos;s grinding chamber and retrieve the plastic piece. Use a utility knife or a flat-bladed tool to carefully scrape away any plastic burrs from the inside edge of the hole to ensure a smooth opening and prevent future clogs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wo-WKiC2yrQ</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8816-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lAwTK8ILk1s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Disposal Unit — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Prepare the garbage disposal unit for installation. Attach the black drain elbow to the discharge port on the side of the disposal. Make sure to place the rubber gasket inside the flange before attaching the elbow, and then secure it tightly with the provided screws and a screwdriver. If you plan to connect a dishwasher, now is the time to knock out the plastic plug on the dishwasher inlet, typically using a screwdriver and a light tap from a hammer. Be sure to retrieve the plastic plug from inside the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lAwTK8ILk1s</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8815-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vxwXTL571fA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Retrieving Installation Parts — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>The presenter reaches inside the disposal&apos;s grinding chamber to pull out the remaining parts. He removes a bag containing a gasket and screws, the black plastic drain elbow, and the sink stopper/splash guard. He struggles slightly to remove all the pieces from the tight space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vxwXTL571fA</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8815-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Y5X-6t2aHIc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Stuck Impeller Blades — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>First, identify the specific problem with the garbage disposal. This method addresses stuck impeller blades inside the grinding chamber, not a jammed motor. Reach into the sink drain (ensure power is off) and use your fingers or a tool to feel the small, pivoting blades. If they are rusted and do not move or swivel, they are the problem. The video contrasts this with a jammed motor, which would be fixed using a disposal wrench on the bottom of the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Y5X-6t2aHIc</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8815-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wtjHqDRrIzo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Alternative Method: Unjam from Top — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>If your garbage disposal model does not have a bottom opening for a wrench, you can attempt to unjam it from above. Take a sturdy wooden broom handle and insert it down through the sink drain into the disposal&apos;s grinding chamber. Position the end of the handle against one of the impeller blades on the grinding plate. Use the handle as a lever to push the plate, rotating it back and forth to dislodge the obstruction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wtjHqDRrIzo</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8814-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GT50uA9WFxE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>The most critical first step is to completely turn off the power to the garbage disposal to prevent any risk of injury. Locate the circuit breaker that controls the disposal in your home&apos;s electrical panel and switch it to the &apos;off&apos; position. If the disposal is plugged into an outlet under the sink, unplug it directly. Confirm the power is off by trying to turn on the disposal at its switch; it should not make any sound or movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GT50uA9WFxE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8814-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/45UCPKew1XE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Before starting any work on the garbage disposal, it is crucial for safety to ensure the power is completely off. Go to the switch on the wall or cabinet that controls the disposal and flip it to the &apos;off&apos; position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/45UCPKew1XE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8814-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JA1FNRFNjXE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Before performing any work, ensure your safety by completely disconnecting power to the garbage disposal. First, turn the wall switch to the &apos;off&apos; position. For absolute certainty, go under the sink and unplug the disposal&apos;s power cord from the electrical outlet. If your disposal is hardwired and cannot be unplugged, go to your home&apos;s circuit breaker panel and turn off the breaker that powers the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JA1FNRFNjXE</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8819-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BQXa1i7Wy_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Drain Hose Configuration — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Examine the dishwasher drain hose under the sink. If the hose connects directly to the garbage disposal without first looping up towards the underside of the countertop, it is installed incorrectly and can allow dirty sink water to back up into the dishwasher. The solution is to create this &apos;high loop&apos;.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BQXa1i7Wy_E</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8819-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4jo3GnCOAbE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Improper Drain Hose Configuration — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Inspect the dishwasher drain hose located under the kitchen sink. As explained in the video, if the hose lies flat on the bottom of the cabinet without an upward loop, it creates a potential for backflow. Dirty water from the sink drain or garbage disposal can travel back down the hose and into the dishwasher, causing unpleasant odors and potentially leaving residue on clean dishes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4jo3GnCOAbE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8819-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iOWt8tY1IvA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect the Dishwasher Drain Line — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Open the cabinet under your kitchen sink to inspect the dishwasher drain hose. This is typically a flexible, corrugated hose running from the dishwasher to an inlet on the side of the garbage disposal or a dedicated drain pipe. Observe its path. If the hose droops down from the disposal connection without first rising towards the underside of the countertop, it lacks a proper high loop, and one should be installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iOWt8tY1IvA</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8818-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KBThuipmejk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Hoses to New Air Gap — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Take the new air gap assembly and connect the hoses. The smaller hose from the dishwasher attaches to the smaller, angled inlet. The larger hose going to the garbage disposal attaches to the larger, straight outlet. Push the hoses on as far as they will go to create a tight seal. Slide the hose clamps into position over the nipples and tighten them securely with the screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KBThuipmejk</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8818-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h7XivMqoYg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Drain Hose to Dishwasher — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>Identify the &apos;drain end&apos; of the new hose, which is typically the curved end. Slide a spring-style hose clamp over this end. Firmly push the hose onto the dishwasher&apos;s drain port. Using pliers, squeeze the tabs of the hose clamp to open it, then slide it over the connection point. Ensure the clamp is positioned securely between the raised ridges on the hose fitting to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h7XivMqoYg4</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8818-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Rrks02tzdxY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Hoses to the Air Gap — How to Connect a Dishwasher Drain to a Garbage Disposal</video:title>
      <video:description>First, take the smaller of the two drain hoses, which comes from the dishwasher, and connect it to the smaller, straight inlet port on the air gap assembly. Secure it with a hose clamp. Next, take the larger drain hose, which goes to the garbage disposal, and connect it to the larger, angled outlet port on the air gap assembly. Also secure this with a hose clamp. Use a screwdriver to tighten both clamps firmly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Rrks02tzdxY</video:player_loc>
      <video:duration>202</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8808-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kVWus0p_xAE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Tank Pre-Charge Pressure — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Before filling the tank with water, check the air pre-charge. Locate the Schrader valve on top of the tank. Find your pump&apos;s cut-on pressure by checking the label inside the pressure switch cover. The tank&apos;s air pressure should be set to 2 PSI below that cut-on pressure. Use a tire pressure gauge to verify the pressure and adjust if needed. Once correct, replace the pressure switch cover.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kVWus0p_xAE</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8808-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VM0OB-r8YnM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust Expansion Tank Pressure — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Turn off the main water supply to the house and drain any remaining water from the system. Locate the expansion tank and remove the plastic cap covering the valve stem. Use a tire pressure gauge to check the current air pressure in the tank.  It should be set to 2 PSI below the cut-in pressure or cut-out pressure on the pressure switch or the regulated water pressure.  If the pressure is low, use an air compressor or bicycle pump to add air until it matches the desired pressure (typically the same as the PRV setting). Replace the protective cap on the valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VM0OB-r8YnM</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8808-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GV1BLlCjqe4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Inspection and Inaccurate Pressure Check — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>The presenter introduces the well pressure tank, explaining the importance of maintaining the correct internal air pressure for proper function. He removes the plastic cap from the Schrader valve on top of the tank. He notes the current water system pressure is about 45 PSI on the gauge. He then uses a digital inflator to check the air pressure in the tank, which also reads 45 PSI, demonstrating that checking the air pressure while the tank is full of water is not an accurate method for determining the pre-charge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GV1BLlCjqe4</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8807-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GorDyqjE9VQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power to the Water Heater — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>For safety, the first and most critical step is to turn off the power to your electric water heater. Locate your home&apos;s main electrical panel (breaker box) and find the circuit breaker that controls the water heater. Flip the breaker to the &apos;OFF&apos; position to cut all electrical supply to the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GorDyqjE9VQ</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8807-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fEPyWZe4m1E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power and Gas Supply — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Before starting any work, it&apos;s crucial to ensure the water heater is safely powered down. For an electric water heater, locate the corresponding breaker in your home&apos;s circuit breaker box and switch it to the &apos;off&apos; position. If you have a gas water heater, locate the gas supply valve leading to the unit and turn it to the &apos;off&apos; position to stop the flow of gas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fEPyWZe4m1E</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8807-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wEMjS1YNNYc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off the Water Heater — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Before you begin, turn off the power to your water heater. For an electric water heater, locate the corresponding breaker in your electrical panel and switch it to the &apos;off&apos; position. For a gas water heater, find the gas valve on the unit and turn it to the &apos;pilot&apos; position. This is a critical safety step to prevent electrical shock or gas issues during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wEMjS1YNNYc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8809-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vmF859yn5eo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Tank — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Immediately after the old tank is removed and water is spraying from the pipe, the homeowner grabs the new expansion tank and begins screwing it onto the threaded pipe fitting. This action quickly stops the flow of water. His assistant stands by as he hand-tightens the tank into place. He then uses the large wrench to fully tighten the tank, ensuring a secure, leak-proof connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vmF859yn5eo</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8809-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SISuE9fbsNk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the New Expansion Tank — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Before installing the new tank, you must prepare it. First, use a tire pressure gauge to check the air pressure inside the new tank. It should match your home&apos;s static water pressure (the video&apos;s pressure was 40 PSI). Use an air pump to add or release air as needed. Next, clean the male threads on the copper pipe fitting with a wire brush to remove any old Teflon tape or debris. Finally, wrap the female threads of the new expansion tank with several layers of Teflon tape, wrapping in a clockwise direction to ensure it doesn&apos;t unravel when screwed on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SISuE9fbsNk</video:player_loc>
      <video:duration>88</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8809-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z5ItEW_Ubgw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New T&amp;P Valve — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>After removing the old valve, clean the threads on the tank fitting with a rag or a screwdriver to remove any old pipe dope or mineral deposits. Apply a liberal amount of new pipe sealant or Teflon tape to the threads of the new T&amp;P valve. Hand-thread the new valve into the tank fitting to ensure it is not cross-threaded. Once started correctly, use the pipe wrench to tighten it until it is snug and the outlet is pointing downwards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z5ItEW_Ubgw</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8810-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fEPyWZe4m1E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Refill the Water Heater — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>To refill the tank, first ensure the hot water faucet you opened earlier is still open. This allows air to escape as the tank fills. Then, fully open the cold water inlet shut-off valve. You will hear the tank begin to fill with water. While it&apos;s filling, check the new drain valve for any leaks or drips. Keep the hot water faucet open until a steady stream of water flows out, which indicates the tank is full of water and all the air has been purged. Once you have a steady stream, you can turn the faucet off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fEPyWZe4m1E</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8810-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HtZNK4L14mk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Refill Tank and Restore Power — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Ensure the new drain valve is in the closed position by turning the screw clockwise with a screwdriver until it stops. Open the cold water intake valve to begin refilling the tank. Leave the hot water faucet open; once water flows steadily from it, the tank is full and the air has been purged. Close the faucet. Finally, return to the circuit breaker and restore power to the water heater. The water heater is now ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HtZNK4L14mk</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8810-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cYzsNF_AeTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill and Test for Leaks — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Before mounting the unit and connecting power, it is essential to fill the tank with water and check for any leaks. You can attach a temporary hose fitting to the cold water inlet. Connect a water source and allow the tank to fill completely. You will know it is full when water begins to flow steadily from the hot water outlet. At this point, carefully inspect all the fittings you installed for any signs of dripping or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cYzsNF_AeTM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8811-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qAGFZ_5jX5U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove T&amp;P Valve — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Using a pipe wrench, carefully grip the Temperature and Pressure (T&amp;P) relief valve located on the upper side of the water heater tank. Turn it counter-clockwise to unscrew and remove it completely from the tank. Place some towels or a bucket underneath to catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qAGFZ_5jX5U</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8811-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8G-hBeTnVo8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Place a small bucket or towel under the water supply line connection to catch any drips. Use a wrench to loosen and disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts under the rim of the toilet bowl. Use a wrench or socket to unscrew the nuts from these bolts. Once the nuts and washers are removed, carefully lift the toilet tank straight up and off the bowl. Place it on a protected surface like a towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8G-hBeTnVo8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8811-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UBfnyDHAjmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Toilet Tank — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>With the tank empty, the water supply line is disconnected from the bottom of the tank using a pair of pliers. Next, the bolts that secure the tank to the toilet bowl are removed. Due to rust, the bolts snap during removal. Once the connections are severed, the tank is carefully lifted off the bowl and placed over the sink to drain any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UBfnyDHAjmc</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8813-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrYKP7NTS_A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the water heater — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>First, locate and turn off the cold water supply valve leading to the water heater. Attach a garden hose to the drain valve at the bottom of the tank and run the other end of the hose to a safe drainage area, such as outside or into a floor drain. To allow air into the tank so it can drain, open a hot water faucet somewhere in the house or flip the lever on the temperature and pressure relief valve (T&amp;P valve) to the open position. Finally, open the drain valve, often using a flathead screwdriver to turn the knob, and let the tank drain completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrYKP7NTS_A</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8813-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gGj3wnHu9vU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain Top of Water Heater — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>To prevent a large spill, you need to lower the water level inside the tank to just below the expansion tank connection. Place a bucket or container under the T&amp;P relief valve. Carefully lift the valve&apos;s lever to release hot water and pressure into the bucket. Continue draining until the water flow stops. This indicates the water level is now below the top connections of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gGj3wnHu9vU</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8813-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4frZGpH3erQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Heater — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>To relieve pressure and allow the tank to drain, open a hot water faucet somewhere in the house. Attach a garden hose to the drain valve at the bottom of the water heater and route the other end to a floor drain or outside. Open the drain valve to allow water to empty from the tank. You only need to drain it to a level below the element you are replacing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4frZGpH3erQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8812-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x_RL-Ou-zmY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble, Refill, and Test — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>With both new elements installed, reattach both the upper and lower metal access panels securely. Turn the cold water supply valve back on fully. Go to a nearby sink or tub and open a hot water tap. Let it run until all the air is purged from the system and water flows in a steady, uninterrupted stream. This confirms the tank is full. Carefully inspect the new upper and lower elements for any leaks. Once you have confirmed there are no leaks and the tank is full, return to the electrical panel and switch the circuit breaker for the water heater back to the &apos;ON&apos; position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x_RL-Ou-zmY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8812-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zMrxJUfDyvI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on gas, check for leaks, and light pilot — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>Turn the gas supply valve back on (parallel to the pipe). Immediately use a gas leak detector to check all the fittings you loosened and tightened. Once confirmed there are no leaks, follow the instructions on the water heater to light the pilot. This typically involves turning the knob to &apos;PILOT&apos;, pressing and holding it, and repeatedly clicking the igniter until the pilot flame appears. Hold the knob for another 30-60 seconds, then release and turn to your desired temperature.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zMrxJUfDyvI</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8812-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Suf9o2w5ilw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Power — How to Replace a Water Heater Expansion Tank</video:title>
      <video:description>With the pressure relief valve closed, turn your water supply back on. Go back inside and open the hot water faucet again. Let it run until all the air sputters out and you have a steady stream of water. This confirms the water heater tank is full again. Once full, you can turn the water heater&apos;s power back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Suf9o2w5ilw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8799-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wdhB8Tnib2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water &amp; Empty Tank — How to Install a Bidet Toilet Seat</video:title>
      <video:description>The first step is to prepare the toilet for the installation. Locate the water supply valve on the wall behind or below the toilet and turn it clockwise to shut off the water flow. Once the water is off, press or pull the flush handle to empty as much water as possible from the tank. This prevents spills and allows you to work inside the dry tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wdhB8Tnib2U</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8799-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PUVssZsSbPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Begin by turning the water supply valve clockwise to shut off the water to the toilet. Next, flush the toilet and hold the handle down to drain as much water as possible from the tank. Use a sponge to soak up and remove any remaining water from the bottom of the tank. Place a bucket or container on the floor underneath the tank&apos;s connections to catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PUVssZsSbPw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8799-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fFuokGzxtTA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Removal — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Before starting any work, locate the water shut-off valve on the wall behind or next to the toilet. Turn the handle clockwise until it stops to completely shut off the water supply to the toilet. After shutting off the water, flush the toilet to drain most of the water from the tank. Disconnect the small fill hose that runs from the top of the fill valve to the overflow pipe. Place a tray or bucket on the floor below the tank connections to catch any remaining water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fFuokGzxtTA</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8800-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_doXS2FXvDs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Align and Secure the Bidet Seat — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Place the provided paper template onto the toilet bowl, under the mounting plate, to correctly position it. Adjust the mounting plate forward or backward until it aligns perfectly with the template guides. Once in the correct position, use a screwdriver to fully tighten the two screws, firmly securing the mounting plate. Remove the paper template. Align the bidet seat with the mounting plate and slide it on until you hear an audible click, which confirms it is locked in place. You can test the release mechanism by pressing the button on the side of the seat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_doXS2FXvDs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8800-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jkAOqzc6SQ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall the Toilet Seat — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Place the toilet seat back on top of the bidet attachment. Align the seat&apos;s hinge holes with the slots in the bidet&apos;s mounting plates and the holes in the toilet bowl. Insert the original mounting screws through the hinges and the bidet plates. From underneath the toilet rim, thread the nuts onto the screws. Use a screwdriver to tighten the screws until the seat is securely fastened. Do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jkAOqzc6SQ8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8800-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/soTfVXk7aTY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reattach Seat — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Place the toilet seat back on top of the bidet attachment, aligning its holes with the bidet&apos;s mounting plates and the holes in the toilet bowl. Insert the original toilet seat bolts through the seat, the bidet attachment, and the bowl. Secure them from underneath with the nuts. Tighten the bolts with a screwdriver until the seat and bidet are snug and do not move.</video:description>
      <video:player_loc>https://www.youtube.com/embed/soTfVXk7aTY</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8806-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xdts9Uf8YHc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Check for Leaks — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Slowly turn the water supply valve back on (counter-clockwise). As the toilet tank refills, carefully inspect all the new connections for any signs of dripping or leaking. A useful trick is to wipe each connection point with a piece of dry toilet paper; any moisture will be immediately obvious. If a leak is detected, turn the water off and gently tighten the leaking connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xdts9Uf8YHc</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8806-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eZO7SU-x7kw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Function and Leaks — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Slowly turn the main water supply valve back on. As the toilet tank refills, carefully inspect all the new connections (at the T-valve and the bidet inlet) for any signs of water leakage. Once confirmed there are no leaks, test the bidet&apos;s functionality by activating the spray. Use your hand to check the water stream and pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eZO7SU-x7kw</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8806-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bfrnp1sLalg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Test — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Slowly turn the water shut-off valve counter-clockwise to restore the water supply. Listen for the toilet tank to fill and carefully inspect all new connections—at the tank, the T-adapter, and the bidet—for any signs of dripping or leaks. Once you&apos;ve confirmed there are no leaks, test the bidet&apos;s function by turning the control knob. Use a sponge or point the nozzle into the bowl to observe the spray and ensure it is working correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bfrnp1sLalg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8801-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IqeoINJfrFU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Disconnect the existing water supply hose from the bottom of the toilet tank&apos;s fill valve. Attach the supplied T-connector to the fill valve, ensuring the rubber washer is inside. Reconnect the toilet&apos;s original supply hose to the bottom of the T-connector. Now, take the new bidet supply hose and connect one end to the side outlet of the T-connector. Connect the other end of the hose to the water inlet on the bidet seat. An optional 90-degree elbow can be used at the bidet inlet for a cleaner look. Hand-tighten all connections firmly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IqeoINJfrFU</video:player_loc>
      <video:duration>163</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8801-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BDbSU32_PlU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply — How to Install a Bidet Toilet Seat</video:title>
      <video:description>First, ensure the water supply to the toilet is turned off at the shutoff valve, typically located on the wall or floor. Flush the toilet to empty the tank. Disconnect the existing flexible supply line from the bottom of the toilet tank&apos;s fill valve. Screw the provided T-adapter onto the fill valve&apos;s threads. Re-attach the toilet&apos;s flexible supply line to the bottom connection of the T-adapter. Finally, connect the new hose from the bidet seat to the side connection of the T-adapter. Hand-tighten all connections and then give them a slight turn with pliers to ensure a snug, leak-free seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BDbSU32_PlU</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8801-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NaBJRlca4S0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Hose to Bidet — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Now it&apos;s time to connect the water to the bidet itself. Take the flexible metal braided hose that came with the bidet. Attach one end to the side outlet of the T-valve you installed earlier. Attach the other end to the water inlet on the side of the bidet&apos;s control unit. Tighten both connections by hand until they are snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NaBJRlca4S0</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8804-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_nvupFC0Qqw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Bidet and Reinstall Toilet Seat — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Place the bidet attachment onto the toilet bowl, aligning the adjustable mounting brackets with the bolt holes. Place the toilet seat on top of the bidet attachment. Insert the toilet seat bolts through the seat and bidet brackets, and secure them from underneath with the nuts. Tighten until snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_nvupFC0Qqw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8804-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q_RBZ61n2X8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Re-attach and Secure Toilet Seat — How to Install a Bidet Toilet Seat</video:title>
      <video:description>After placing the bidet, reinstall the original toilet seat on top of it. Align the seat&apos;s mounting holes with the bidet&apos;s adjustable plates and the toilet bowl&apos;s holes. Insert the original mounting bolts and tighten the nuts from underneath. Before fully tightening, adjust the bidet forward or backward to ensure the nozzles have clear space. Once positioned correctly, tighten the bolts securely so that neither the bidet nor the seat wobbles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q_RBZ61n2X8</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8804-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/haxVYgoBCng/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount and Adjust the Bidet Seat — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Place the Swash bidet seat flat onto the toilet bowl, in front of the mounting plate. Carefully slide the seat backward towards the tank until you hear and feel it click into place on the mounting plate. Once attached, you can slide the seat forward or backward to align it perfectly with the toilet bowl. When you are happy with the position, reach under the toilet bowl and fully tighten the nuts to lock the mounting plate in its final position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/haxVYgoBCng</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8802-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LG2UvJ2TsIU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the T-Valve — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Place a towel on the floor to catch any drips. By hand, unscrew the flexible water supply line from the bottom of the toilet&apos;s fill valve. Some water will likely drip out, which is normal. Once disconnected, take the T-valve and screw its top connection onto the toilet&apos;s fill valve where the hose was just removed. Hand-tighten it firmly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LG2UvJ2TsIU</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8802-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HHUHHiDUgQU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Fill Valve — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Place a bucket or towels underneath the toilet tank to catch any residual water. Unscrew the water supply line connector from the bottom of the old fill valve. If it&apos;s too tight to loosen by hand, use tongue-and-groove pliers to get it started, then finish by hand. Next, unscrew and remove the plastic locknut that holds the fill valve in place. Again, use pliers if necessary to start it. Once the locknut is off, go back to the inside of the tank, detach the refill tube from the overflow pipe, and lift the entire old fill valve assembly out of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HHUHHiDUgQU</video:player_loc>
      <video:duration>101</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8802-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Xp5csckRlo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Old Supply Line — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Begin by disconnecting the existing water supply line. Unscrew the nut connecting the supply line to the bottom of the toilet fill valve, and then use pliers to loosen and remove the other end from the old angle stop valve. Have a rag or small pan ready to catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Xp5csckRlo</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8803-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9EkHhQMlffo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Seat and Clean Area — How to Install a Bidet Toilet Seat</video:title>
      <video:description>After successfully cutting through both bolts, the old toilet seat is now free. Carefully lift the entire old seat and hinge assembly off the toilet and set it aside for disposal. Inspect the area around the bolt holes on the toilet bowl. Remove any remaining fragments of the old bolts, nuts, or rust. Use a cleaning cloth and an all-purpose cleaner or disinfectant to thoroughly clean the porcelain surface where the new hardware will be installed. This ensures a clean base for the new seat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9EkHhQMlffo</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8803-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RYtt0gJNeXY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access the Mounting Bolts — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Locate the caps at the back of the toilet seat that cover the mounting bolts. Using a flathead screwdriver, carefully pry these caps open to expose the head of the bolt. This will give you access to tighten or remove the bolts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RYtt0gJNeXY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8803-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F20NuU37qeY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Tank Bolts — How to Install a Bidet Toilet Seat</video:title>
      <video:description>To remove the old bolts, you&apos;ll need two tools. Use a flathead screwdriver to hold the bolt steady from inside the tank. From underneath the toilet bowl, use a 13mm deep socket with a ratchet to loosen and remove the nut. An extension on the ratchet can make it easier to reach. Once the nut is off, remove the metal washer. Repeat this process for the bolt on the other side. After both nuts are removed, carefully lift the toilet tank off the bowl and set it aside on a towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F20NuU37qeY</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8805-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8G-hBeTnVo8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Toilet Tank — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Carefully place the tank back onto the toilet bowl, guiding the tank bolts through the corresponding holes in the bowl. From underneath, place the washers and hand-tighten the nuts onto the bolts. Use a wrench to tighten the nuts, alternating between the left and right side to apply even pressure. Be careful not to overtighten, as this can crack the porcelain. The tank should be stable and not wobble. Reconnect the water supply line to the fill valve and hand-tighten, then give it a final quarter-turn with a wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8G-hBeTnVo8</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8805-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HtZNK4L14mk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Drain Valve — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Prepare the new drain valve by applying thread sealant, such as Teflon tape, to the male threads in a clockwise direction. Thread the new valve into the tank port by hand, turning it clockwise. Once it is hand-tight, use the adjustable wrench to tighten it securely. Be careful not to overtighten, as this could damage the threads on the tank or the valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HtZNK4L14mk</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8805-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xKIFKatVBGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Drain Valve — How to Install a Bidet Toilet Seat</video:title>
      <video:description>Take the new drain valve, ensuring it is in the closed position. It&apos;s recommended to wrap the threads with thread sealant tape (Teflon tape) to ensure a watertight seal. Quickly insert the new valve into the tank opening and turn it clockwise by hand to engage the threads. Once hand-tight, use the adjustable wrench to give it a final tightening, being careful not to overtighten and damage the threads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xKIFKatVBGk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8793-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GSJMKtZ-Spk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Set the Toilet Drain Rough-In — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>The plumber positions the PVC drain pipe assembly between the wooden floor joists. Using a tape measure, he measures the distance from the bare wood wall framing to the center of the toilet drain fitting. He explains that while a 12-inch rough-in from the framing is typical for a standard drywall finish, he is setting his at 13 inches. This extra inch accounts for the future installation of half-inch drywall and tile, ensuring the toilet will fit correctly against the finished wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GSJMKtZ-Spk</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8793-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/71ablh5mDtk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Site Preparation and Planning — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>Assess the installation area within the wall studs. This may require modifying existing plumbing, such as jogging a vent pipe over to create adequate clearance for both the washer box and the P-trap assembly. Ensure there is enough space for a proper standpipe drop (minimum 24 inches) and that all drain components will fit within the wall cavity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/71ablh5mDtk</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8793-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I18V5TzfesA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position Drain Pipe — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>Begin by placing the vertical toilet riser pipe, which has an elbow attached at the bottom, into the open floor cavity. Use a small level to check that the pipe is perfectly vertical, or plumb. Adjust its position as needed. Next, use a tape measure to verify the rough-in distance, which is the measurement from the wall framing to the center of the drain pipe. This ensures the toilet will be positioned correctly in the room.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I18V5TzfesA</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8794-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AEBODp00wXI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repaired System — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>With the AAV installed, the user tests the plumbing system. He runs the water in the sink and flushes the adjacent toilet. The sink now drains quickly and efficiently, creating a strong whirlpool, which indicates that the drain is now properly vented. He repeats the test to confirm the fix is successful and expresses his satisfaction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AEBODp00wXI</video:player_loc>
      <video:duration>162</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8794-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U7eRkan8JzU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Final Leak Check — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>This is a crucial final check before closing the wall. Open the main water supply to fully pressurize the entire plumbing system. Meticulously inspect every single pipe joint and connection for any signs of water drips or leakage. Resolve any leaks found before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U7eRkan8JzU</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8794-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z-DTspmEmYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Drains for Proper Flow — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>After snaking the line, the plumber goes inside the house to confirm the clog has been cleared. He systematically tests all the plumbing fixtures. He flushes both toilets and turns on the faucets in the sinks and showers. This sends a large volume of water down the main line, ensuring it can handle a normal load without backing up. He inspects the bathtub, which was previously full of sewage, to confirm it is now draining properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z-DTspmEmYs</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8795-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s9lycNHpvG4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill Trench and Finalize — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>After confirming the cleanout is installed correctly and all connections are tight, the final step is to backfill the trench. Use shovels to carefully return the excavated dirt into the hole, covering the pipe. Gently tamp down the soil as you go to prevent future settling. Ensure that the tops of the cleanout riser pipes remain exposed above the ground for easy access, then level the surrounding area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s9lycNHpvG4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8795-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aZQNswZZYjY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill Trench and Settle Soil — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>After the pipe assembly is complete and secure, use a shovel to backfill the trench with the previously excavated dirt. Fill the soil in around the pipe until it is level with the surrounding yard. To ensure the soil compacts and doesn&apos;t sink over time, use a garden hose to thoroughly saturate the area with water. This helps the dirt settle into a dense state.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aZQNswZZYjY</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8795-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YcogmAz4vhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill and Level the Trench — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>Once the glue has set, carefully backfill the trench with the excavated dirt. Use the backhoe to move the bulk of the soil back into the trench, and then use a rake and shovel to level the area. Lightly compact the soil around the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YcogmAz4vhE</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8797-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F9c_KbaLfak/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Add Wye Fitting for Branch Line — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>To add a branch for another fixture, the plumber cuts the newly installed horizontal drain line using a reciprocating saw. After cutting, the edges are deburred to ensure a clean surface for a proper solvent weld. A PVC wye fitting is then prepared. PVC primer and cement are applied to the pipe ends and the inside of the wye fitting, which is then pushed into place and held briefly to set, creating a strong, leak-proof junction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F9c_KbaLfak</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8797-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LR0IJQSGM_o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit the New PVC Pipe System — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>Before permanently gluing the new PVC system, perform a dry-fit of all the components. Start by attaching a threaded PVC adapter to the main drain. Then, assemble the straight pipe sections and fittings, such as 45-degree elbows and a wye with a cleanout plug. The cleanout provides future access for snaking the drain. Use tape or a marker to create alignment marks on the pipes and fittings to ensure they are correctly oriented during the final gluing stage. This step is crucial for achieving the proper slope and fit between the two connection points.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LR0IJQSGM_o</video:player_loc>
      <video:duration>103</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8797-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u-ZILYISeX8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solvent Welding and Connecting to Waste Line — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>This step creates the permanent plumbing connection. Begin by preparing the cut pipe section and the drain outlet using a pipe cleaner and primer. Apply the appropriate solvent cement (ABS or PVC) to the outside of one end of the pipe and the inside of the drain outlet. Insert the pipe into the drain with a twisting motion to ensure a complete bond. Next, prepare the P-trap opening with cleaner and primer. Apply solvent cement to the inside of the P-trap and the outside of the free end of the pipe attached to the drain. Carefully lower the entire assembly into place, again using a twisting motion as you insert the pipe into the P-trap to create a secure, watertight connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u-ZILYISeX8</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8796-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2LDevfJYNJo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Fixtures — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>After the main pipe is rerouted, connect it back to the supply lines for the bathroom fixtures. In the video, this involves using a T-fitting to branch off the main hot water line to supply the sink and the toilet. An angle stop valve is installed on the line going to the toilet to allow for future shut-off. These connections are also made using the solvent-welding process with primer and cement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2LDevfJYNJo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8796-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NyMKfY5LbF0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>System Overview and Preparation — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>Begin with a thorough visual inspection of the entire plumbing system. The system shown includes red PEX-A pipes for hot water and blue for cold, originating from a central distribution manifold. Lines run to a bathtub, toilet, vanity, kitchen sink, and washer box. A loop is created to and from the future water heater location. The plan is to turn on the main water supply and systematically open each valve on the manifold to pressurize the system and check for leaks at all connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NyMKfY5LbF0</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8796-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RnCOl8sudlE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Adapter and Shutoff Valves — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>First, apply PVC cement to the drain stub-out and attach the P-trap adapter. Next, slide decorative escutcheons over the hot and cold water supply pipes. Place half-inch PEX crimp rings onto the pipes, followed by the PEX angle stop valves. Use a PEX crimping tool to securely fasten the rings, creating a watertight seal for both the hot and cold water lines. Ensure the valve outlets are facing straight up to facilitate easy connection to the faucet supply lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RnCOl8sudlE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8798-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k-r_PPgh80E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Excavation — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>After marking the location, put on safety gear, including ear protection and safety glasses. Use an electric jackhammer to break through the concrete floor. Once the concrete is broken, remove the pieces. Then, use a pickaxe and shovel to dig out the soil and gravel underneath until the sewer pipe is fully exposed. Place the excavated material into buckets for easy removal. Be careful not to damage the pipe during excavation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k-r_PPgh80E</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8798-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dPuyx8jVpr8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demolition and Excavation — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>The first step is to break through the concrete floor and excavate the surrounding dirt and rock to fully expose the old, damaged cast iron drain pipe. A jackhammer is used to break up the concrete, and the rubble and dirt are removed by hand to create a trench with clear access to the entire section of pipe that needs to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dPuyx8jVpr8</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8798-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WeQw3lXY0YU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark, Cut, and Break Asphalt — How to Rough-In Plumbing for a Basement Bathroom</video:title>
      <video:description>Based on the camera inspection findings, mark the ground directly above the collapsed section of the pipe using spray paint. With proper safety gear, use a large concrete saw to cut through the asphalt along the marked lines. Then, use an electric jackhammer to break up the cut section of asphalt into manageable pieces, preparing the area for excavation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WeQw3lXY0YU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8784-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/drig_Fq5S9w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Begin by ensuring the water supply to the shower is turned off. This is a critical safety step to prevent water from spraying during the installation. Next, gather all the necessary tools for the job. The video recommends having an adjustable wrench, adjustable pliers, and thread seal tape on hand. Always refer to your specific product&apos;s instruction manual to confirm the exact tools needed for your model.</video:description>
      <video:player_loc>https://www.youtube.com/embed/drig_Fq5S9w</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8784-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cZPurTkwJJ4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Prepare — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Before starting the installation, gather all the necessary tools and supplies. You will need a Phillips screwdriver (a long one is recommended for easier access), an adjustable wrench, safety glasses for eye protection, and a flashlight to see under the sink. You&apos;ll also need a bucket or pot to catch water when flushing the lines and a towel for cleanup. For countertops with an uneven surface, you may need silicone sealant to ensure a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cZPurTkwJJ4</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8784-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Yb4xZmQ13c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Installation — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Before starting any work, prepare the area under the sink. Begin by shutting off the hot and cold water supply valves, typically by turning them clockwise. Place a bucket or container underneath the plumbing to catch any water that will drain from the lines. Open the existing faucet to release any pressure and drain the remaining water. Finally, use an adjustable wrench to disconnect the hot and cold water supply lines from the shutoff valves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Yb4xZmQ13c</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8786-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WNCoh0nZFJ4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Drain and Overflow Fixtures — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Begin by removing the overflow drain cover using a power drill. Then, insert a specialized tub drain removal tool into the main drain opening. Attach a ratchet wrench to this tool and turn it counter-clockwise to loosen and remove the drain flange. This tool is particularly useful when the drain&apos;s built-in crosshairs are broken.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WNCoh0nZFJ4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8786-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qjR1RyK18VM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select the Drain Extractor Tool — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Given that the drain&apos;s crossbars are missing, a special tool called a Tub Drain Extractor is required. The tool shown is a heavy-duty, knurled metal cylinder with a hex nut on top. The knurled surface is designed to bite into the soft metal of the drain flange, providing the grip needed for removal. It is designed to be turned with a 1/2 inch socket wrench or other large wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qjR1RyK18VM</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8786-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r8KOPmzbLig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locking the tool for removing the drain — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Take your drain removal tool, such as a drain key or smart dumbbell, and insert it into the tub drain opening. If using a dumbbell, insert it through the drain and engage its tines with the strainer or crossbar. If using a drain key, turn it counter-clockwise until its expanding wings touch and grip the inner walls of the drain. Once the tool is engaged, clamp a wrench onto the nut on the key or insert a screwdriver through the dumbbell to act as a lever.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r8KOPmzbLig</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8788-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mz010mNOCoQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Drain Area — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Once the old drain assembly is removed, thoroughly clean the drain opening in the tub. Use an old toothbrush to scrub away any remaining old plumber&apos;s putty, mineral deposits, and grime from the drain threads and the surface where the new flange will sit. Wipe the area clean with paper towels. Next, access the underside of the tub to remove the old rubber gasket and replace it with the new one that came with the drain assembly kit. Finally, prepare for the new drain by rolling plumber&apos;s putty into a rope and forming a ring around the drain opening on the top side of the tub. This will create a watertight seal when the new drain is installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mz010mNOCoQ</video:player_loc>
      <video:duration>190</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8788-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jzn5-hALuHk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Sink Drain — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>After the old disposal is removed, the first step is to prepare the sink drain opening. Use a paper towel or cloth to thoroughly remove all residual old plumber&apos;s putty from the sink surface around the drain hole. It&apos;s crucial that this area is perfectly clean and dry to ensure a watertight seal with the new components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jzn5-hALuHk</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8788-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NVFnaygxCpA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Surfaces — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Thoroughly clean the old, crumbled plumber&apos;s putty from the sink flange and the sink drain opening. Scrape away all residue to ensure a clean surface for the new putty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NVFnaygxCpA</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8790-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EmcklME7YaM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove strainer — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Remove the screws from the shower drain strainer with a screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EmcklME7YaM</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8790-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C6sMO3Zsztw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Drain Cover and Water — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Using the appropriate screwdriver, remove the screws holding the shower drain cover in place. Lift the cover off and set it and the screws aside in a safe place. If there is standing water in the shower, use the wet/dry vacuum to suction it all out before attempting to clear the drain itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C6sMO3Zsztw</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8790-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m0S0hM6hGbU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unscrew and Remove the Drain Body — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>After tapping the screw, insert the flathead screwdriver into the slot. First, try turning it slightly to the right (clockwise) to break the seal, then turn it counter-clockwise to loosen. Once it&apos;s loose, you should be able to unscrew and lift the entire plastic drain body out by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m0S0hM6hGbU</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8789-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tl6QuP29cCE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Seal the Drain Fitting — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Complete the drain connection from inside the shower. First, apply a continuous bead of silicone sealant to the underside of the drain fitting&apos;s top flange and around the rubber gasket. Place the gasket and then the top fitting into the drain hole of the shower tray. Tighten the fitting to compress the seals and create a watertight connection. Wipe away any excess sealant that squeezes out with a clean cloth for a neat finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tl6QuP29cCE</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8789-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bsq9LzIWGXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Tailpiece on Tub — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>With the tub on its side, install the drain and tailpiece assembly. This typically involves applying a sealant like plumber&apos;s putty under the drain flange inside the tub and then threading the brass tailpiece on from the outside. Tighten it securely with pliers. Before setting the tub, apply a lubricant such as silicone grease or dish soap to the O-rings on the end of the tailpiece. This is a critical step to ensure it slides smoothly and seals properly within the floor drain&apos;s gasket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bsq9LzIWGXU</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8789-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iPTvUxNJXp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten the Drain Strainer — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Insert the main drain strainer body, which is also the no-caulk drain tool. Use a pair of smooth-jaw pliers, like Knipex pliers, to grip the tabs on the strainer. Turn the strainer clockwise to thread it into the brass ring. Tighten it firmly to fully compress the rubber gasket and create the final watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iPTvUxNJXp0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8791-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I7STSQ14wWg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up Excess Putty — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Once the new drain is tightened, inspect the inside of the sink. The pressure from tightening the locknut will have squeezed out the excess plumber&apos;s putty from under the flange. Simply use your finger or a soft cloth to wipe away and remove this excess putty for a clean installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I7STSQ14wWg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8791-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3xONh3qfDD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up and Reconnect P-Trap — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Once the drain flange is securely tightened, use your finger or a putty knife to wipe away all the excess plumber&apos;s putty that has squeezed out around the flange inside the tub. Finally, go underneath the tub and reconnect the P-trap assembly by threading its slip nut onto the bottom of the new drain flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3xONh3qfDD4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8791-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JFXh_DnCG-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Excess Plumber Putty — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Once the strainer is fully tightened from below, return to the top side of the sink. You will see a ring of excess plumber&apos;s putty that has been squeezed out. Simply use your finger to gather and peel away this excess putty. After removing the bulk of the putty, use a clean cloth or towel to wipe away any remaining residue, leaving a clean, finished installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JFXh_DnCG-M</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8792-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hkLOk74lRe0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Sink Flange — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Take a generous amount of plumber&apos;s putty and roll it between your hands to form a rope about 1/2 inch thick. Wrap this putty rope around the underside of the new sink flange. Place the flange into the drain opening from the top of the sink and press down firmly and evenly to create an initial seal. Place a heavy object on the flange to keep it in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hkLOk74lRe0</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8792-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FM5pYiOajVY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Plumber&apos;s Putty — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Take a small amount of plumber&apos;s putty and knead it in your hands to soften it. Roll it into a snake-like rope, about 1/2 inch in diameter. Apply the putty rope evenly around the underside of the new drain flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FM5pYiOajVY</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8792-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5EfpS1N8684/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Install New Drain Body — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Take a small amount of plumber&apos;s putty and roll it into a thin rope. Apply this rope of putty to the underside of the new drain body&apos;s flange. Insert the new drain body into the drain opening and screw it clockwise into the drain pipe by hand. Use the specialized drain removal tool and a screwdriver for leverage to tighten it until it is snug and flush with the bathtub surface. As you tighten, excess plumber&apos;s putty will squeeze out. Wipe away all the excess putty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5EfpS1N8684</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8785-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YksuwpRH0qA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Seal — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Turn on the shower to test the new installation. Check all functions of the handheld shower head. Once confirmed everything is working correctly and there are no leaks, apply a bead of silicone caulk around the top and sides of the escutcheon plate where it meets the tile wall. Do not caulk the bottom edge to allow any moisture that gets behind the plate to drain out. Use a wet sponge to smooth the caulk bead for a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YksuwpRH0qA</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8785-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qABlW1EA7EY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Surface and Apply Silicone — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>After removing the old drain, thoroughly clean the opening in the shower base, scraping away any old, cracked plumber&apos;s putty or debris. Take the new drain fitting and, using a caulk gun, apply a continuous bead of 100% silicone sealant to the underside of the flange that will make contact with the shower floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qABlW1EA7EY</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8785-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eZaKojzU2-8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect from Drain Pipe — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>The shower pan is sealed to the drain pipe with a rubber gasket. First, stuff a rag into the drain to block sewer gases. Then, using a power drill with a standard drill bit, carefully drill into the rubber flange gasket around the perimeter of the drain pipe to break it up. Be cautious not to drill too far down and damage the subfloor. You can also use a utility knife to cut away pieces of the rubber gasket. Once the gasket material is sufficiently broken up, use a vacuum cleaner to remove all the loose rubber debris from around the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eZaKojzU2-8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8787-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_a2LP_Fymeg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Underside Components — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Move to the underside of the shower pan. First, slide the rubber gasket over the threads of the drain body until it is pressed firmly against the bottom of the shower pan. Next, place the fiber friction gasket over the rubber gasket. Finally, thread the locking ring onto the drain body and tighten it by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_a2LP_Fymeg</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8787-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NiRZBKGg2ek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten Drain Assembly — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Insert the sealed drain shoe assembly from underneath the tub, pressing it against the drain opening. From inside the tub, screw the drain strainer into the drain shoe. Use a drain wrench, with a screwdriver inserted through it for leverage, to tighten the strainer firmly. This compresses the gasket and creates the seal. Return underneath and use channel-lock pliers to tighten the slip nut connecting the horizontal pipe to the overflow assembly. As a final precaution, apply sealant around the exterior seam where the drain shoe flange meets the bottom of the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NiRZBKGg2ek</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8787-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GfZgVIAdlVg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten New Drain Assembly — How to Replace a Shower Drain in an Existing Shower Base</video:title>
      <video:description>Install the new drain assembly. Push the putty-laden flange down into the drain hole from the top of the sink. From underneath, place the rubber gasket (with its own layer of putty) onto the drain body, followed by the friction washer and the locknut. Tighten the locknut by hand first, then use a wrench to secure it firmly. As you tighten, excess putty will squeeze out from the top; this is normal. The drain body with the side valve should be oriented correctly before final tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GfZgVIAdlVg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8778-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F6Gs7g_MzeY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Install the New Valve — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Unpack the new air admittance valve. For a better seal, wrap the male threads of the new valve with Teflon tape in a clockwise direction. Carefully thread the new valve into the drain pipe fitting by hand to avoid cross-threading. Hand-tighten it securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F6Gs7g_MzeY</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8778-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/50s_rOz1nKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare New Pump Assembly — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Unbox the new sump pump and its components from the packaging. Apply PVC primer to the threaded discharge port of the pump and the inside of a short PVC pipe fitting. Follow this by applying PVC cement to both surfaces and firmly pressing the pipe onto the pump&apos;s discharge port to create a secure, waterproof seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/50s_rOz1nKA</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8778-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AgMuSOXaFuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Recirculation Pump — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Prepare the inlet side of the recirculation pump by wrapping its male threads with Teflon tape or applying pipe dope. Ensuring the arrow on the pump is facing downwards (in the direction of flow for a hot-side installation), screw the pump into the coupling that was just installed. Hand-tighten the pump; its final orientation does not need to be perfectly forward-facing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AgMuSOXaFuc</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8777-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0iuX9er-SAk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Float Switch Mechanism — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>For safety, unplug the sump pump from its power source. Once unplugged, use a small tool like a metal rod or screwdriver to carefully scrape and clean the debris, silt, and grime that has built up around the float switch and its guide rod. The objective is to remove any obstructions that prevent the float from moving freely up and down with the water level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0iuX9er-SAk</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8777-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tzkBN863DnI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Inspection — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>First, ensure the sump pump is plugged into a working electrical outlet. Then, carefully remove the lid from the sump pit to visually inspect the interior. Look for a high water level, which indicates the pump has not been running when it should have.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tzkBN863DnI</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8777-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MptmYLc_Y7k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Test and Secure Lid — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Plug the pump&apos;s power cord into the electrical outlet. The float switch should rise with the incoming water and activate the pump, which will then drain the pit. Once the pump has been tested and is confirmed to be working correctly, place the lid securely back on top of the sump pit. Ensure the lid snaps into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MptmYLc_Y7k</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8779-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ndS5QVWS_7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Pump and Connect Plumbing — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Lower the new pump assembly into the sump pit, holding it by the handle. Place it on a stable, flat surface at the bottom of the pit, away from any debris. Connect the top of the new discharge pipe to the existing check valve or rubber union. Secure the connection by tightening the hose clamp firmly with a screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ndS5QVWS_7Q</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8779-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/edGcVMI5ULc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Before disassembling the plumbing, identify the sump pump discharge pipe. Unplug the sump pump from the electrical outlet for safety. Place several old towels on the floor around the base of the pipe to absorb the water that will drain out when the pipe is disconnected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/edGcVMI5ULc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8779-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q2-6Rpc2foI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Pump — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>To remove the pump, a special T-handle tool made from galvanized pipe is used. This tool is lowered into the well and threaded onto the top of the pump&apos;s discharge pipe. Once securely attached, the tool is used to unscrew the pump from the pitless adapter (also called a shoe fitting). After it&apos;s unscrewed, carefully lift the entire assembly, including the pump, the long flexible pipe, and the electrical wire, out of the well casing. This can be heavy and awkward, so assistance is recommended.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q2-6Rpc2foI</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8780-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nX7mtPl8EmE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Test New Pump — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Carefully lower the fully assembled new sump pump into the sump pit. Position it so the float can move freely without obstruction. Reconnect the discharge pipe to the main drain line using the rubber boot. Tighten both hose clamps on the boot securely with a screwdriver. Now, plug the float switch cord into the wall outlet. As the water level rises, the float will lift and activate the pump, which will then drain the water from the pit. Observe its operation to ensure everything is working correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nX7mtPl8EmE</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8780-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lke_XgxdItk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Pump and Connect New Assembly — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Place the sump pump back into the bottom of the pit. Screw the new pipe and check valve assembly onto the pump&apos;s discharge outlet. Then, connect the top of the new pipe assembly to the existing house discharge line using a flexible rubber coupling. Position the coupling to bridge the two pipe ends and tighten the metal hose clamps securely using a screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lke_XgxdItk</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8780-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jeIsgJV0JZU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Install New Piping — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Prepare the new pipe assemblies for the pump. Using the old piping as a guide, cut and assemble the new PVC pipes and fittings. Apply Teflon tape to all male threaded fittings. For the incoming line, install a male adapter, a check valve, and the connecting pipe. For the outgoing line, install a T-fitting with a priming plug. Screw both assemblies tightly onto the new pump and connect them to the existing well pipe and pressure tank pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jeIsgJV0JZU</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8781-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9yKUyXt-Vns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>After allowing the PVC cement adequate time to cure as specified by the manufacturer (typically at least 30 minutes for initial set, longer for full cure), proceed to test the new installation. Run a significant amount of water into the tub and let it drain completely. While the water is draining, use a flashlight to meticulously inspect every new joint, from the drain and overflow connections down through the P-trap and the final flexible coupling connection, looking for any sign of drips or moisture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9yKUyXt-Vns</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8781-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y4JhnfylroU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cure and Test the Repair — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>After gluing the new valve and pipe section in place, allow the PVC cement to cure according to the manufacturer&apos;s instructions. Cure times can vary based on temperature and humidity. Once the cement has fully set and hardened, you can slowly turn the handle to close the new ball valve, stopping the flow of water. Check the new joints thoroughly to ensure there are no leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y4JhnfylroU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8781-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IHppTIMohZQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>After allowing the PVC cement adequate time to cure according to the manufacturer&apos;s instructions, the final step is to test the repair. Slowly turn the main water supply back on. Once the supply is restored, operate the handle on the newly installed faucet to check for proper function. Carefully inspect all the new connections—where the adapter meets the wall pipe and where the faucet screws into the adapter—for any signs of drips or leaks. The video shows the water flowing smoothly from the tap, indicating a successful repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IHppTIMohZQ</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8782-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WeKtxl9w2Gc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Clean Pump — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Remove the pump from the sump pit to inspect it. Look for a broken impeller, warped base, or any other damage.  Clean out any gravel or debris from the pump.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WeKtxl9w2Gc</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8782-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FoG-U9znvMQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum the Drain — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Use a shop vacuum to suck out any remaining grease and water from the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FoG-U9znvMQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8782-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ndS5QVWS_7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lift Out Old Pump and Pipe — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Carefully lift the old pump and its attached discharge pipe assembly out of the sump pit. Immediately place the entire assembly into a bucket to catch any residual water and prevent making a mess on the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ndS5QVWS_7Q</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8783-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i0s1vhqk03o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Install PVC Drain Line — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Assemble the drainage line using PVC pipe and fittings. Use PVC primer and cement to securely join a 90-degree elbow to the main drain outlet and another elbow to connect to the bucket. Measure and cut a piece of PVC pipe to connect these two sections. A custom spacer made from a PVC coupling can be used with plumbers putty to create a watertight seal where the pipe enters the bucket. Place the entire assembly into the hole, ensuring it slopes down towards the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i0s1vhqk03o</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8783-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tWG3fb7Vb7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pipe Cutting and Dry Fitting — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>Remove the pump and lid again. Cut the PVC pipe to the appropriate length. Glue a 90-degree fitting onto the lower section of the pipe and another 90-degree fitting to the upper section of the discharge pipe.  Dry-fit the rubber coupling onto the cut pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tWG3fb7Vb7Q</video:player_loc>
      <video:duration>141</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8783-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2fcSDyrJ-cw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assembling the New Sump Pump and Piping — How to Replace a Pedestal Sump Pump</video:title>
      <video:description>The user lays out the new pump and parts. He uses the old assembly as a template to cut the new PVC pipe to the correct length. He drills a small weep hole in the pipe just above the pump outlet to prevent air lock. He then dry-fits and glues the PVC pipe and fittings, including the new check valve, to the new sump pump.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2fcSDyrJ-cw</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8772-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JeZwva0XYKU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Prepare for Removal — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Before starting any work, locate the hot and cold water shut-off valves under the sink and turn them clockwise until they are fully closed. Place a bucket directly underneath the P-trap to catch any water that will drain out. Unscrew the slip nuts on the P-trap by hand and disconnect it, allowing the water from the trap and drain to empty into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JeZwva0XYKU</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8772-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H3b8_GfgZR4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Water Supply Line — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>First, locate the water shutoff valve (angle stop) under the sink. Turn the handle clockwise until it stops to shut off the water supply. Using a pair of adjustable pliers, grip the nut connecting the braided supply line to the valve and turn it counter-clockwise to loosen and remove the line. Have a small towel ready to catch any dripping water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H3b8_GfgZR4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8772-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8aEl5TyRGVQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Faucet — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>First, shut off the hot and cold water supply by turning the shut-off valves under the sink clockwise. Place a bucket underneath to catch drips. Use a basin wrench or adjustable wrench to disconnect the water supply lines from the old faucet. Unscrew the mounting nuts holding the old faucet in place. Once loose, lift the entire old faucet assembly out from the top of the sink and clean the area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8aEl5TyRGVQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8776-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PaMasBhANcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Old Faucet — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Begin by locating the hot and cold water shut-off valves under the sink. Use a flathead screwdriver to turn the valve slots perpendicular to the pipe, shutting off the water flow. Next, position a basin wrench or faucet tool onto the mounting nuts securing the old faucet from below and turn to loosen them. Once loose, use pliers to loosen the supply line nuts from the shut-off valves. Finish unscrewing all connections by hand. With everything disconnected, go to the top of the sink and lift the entire old faucet assembly out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PaMasBhANcM</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8776-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s4IK_Rd9wPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Old Faucet and Supply Lines — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Using an adjustable wrench, loosen and unscrew the nuts connecting the hot and cold water supply lines from the shut-off valves. Next, locate the mounting hardware holding the old faucet in place under the sink. Use a socket wrench or basin wrench to loosen and remove the nuts securing the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s4IK_Rd9wPY</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8776-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GwV-YsePvLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Supply Line — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>First, ensure the main water supply is turned off. Attempt to turn the handle on the old valve; if it is stuck or breaks, proceed with removal. Using a pair of pliers or an adjustable wrench, turn the nut connecting the flexible water supply line to the top of the valve in a counter-clockwise direction to loosen and remove it. Place a towel underneath to catch any spills.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GwV-YsePvLc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8773-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gAPsboemsn4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Clean Valve Body — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Once the old seat is removed, inspect the threads inside the valve body for any damage. Clean out any remaining debris or metal shavings with a rag or a small brush. This ensures the new faucet seat will thread in properly and create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gAPsboemsn4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8773-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dGwHhBlOVEU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace and Connect Water Supply Line — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>The plumber discovers the old supply line is missing its gasket, which caused a leak. He removes the faulty line completely using pliers on the nut at the shut-off valve. He then installs a new braided steel supply line. He threads the new line onto the shut-off valve and the new fill valve by hand, then uses pliers to give each connection a final quarter-turn to ensure a tight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dGwHhBlOVEU</video:player_loc>
      <video:duration>147</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8773-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JRFJ1LYzvyI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connecting Shut-off Valves — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Apply Teflon tape and pipe sealant to the threaded ends of a small nipple or extension. Connect one end of this nipple to the water supply pipe and the other to the threaded section of a shut-off valve. Ensure that the valve is properly secured for future maintenance access. Secure the valve with a wrench or pliers and avoid damaging the threads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JRFJ1LYzvyI</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8774-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Yb4xZmQ13c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply Lines — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Connect the water supply to the new faucet. First, attach the included one-way valve filter to the cold water shutoff valve. Then, connect the cold water supply line to the other end of this filter. Connect the hot water supply line directly to the hot water shutoff valve. Hand-tighten the connections first, then use an adjustable wrench to give them a final quarter-turn to ensure a tight seal. Once both lines are connected, slowly turn on both the hot and cold water shutoff valves and carefully check all connections for any leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Yb4xZmQ13c</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8774-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xk1iW4gvtF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply Lines — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Connect the integrated hot and cold water supply lines from the faucet to the corresponding angle stop valves on the wall. The hot line is typically marked with a red indicator. Thread the connections on by hand first to prevent cross-threading. Then, use an adjustable wrench or finish pliers to give each connection a final quarter-turn to ensure a snug, leak-free seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xk1iW4gvtF8</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8774-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZfgET7ye5dI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Supply Lines to New Faucet — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Take the new faucet and the new braided supply lines. Attach the supply lines to the hot and cold water inlets on the underside of the faucet. Hand-tighten the connections first, then use pliers to gently tighten them another quarter-turn. Be careful not to overtighten and damage the threads or rubber gaskets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZfgET7ye5dI</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8775-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zOezzS_Xy7o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Connections and Test for Leaks — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>With the regulator in place and hand-tightened, use the pipe wrench to fully tighten both the top and bottom nuts to ensure a secure, leak-proof connection. Once both are tight, slowly turn the main water supply valve back on. Listen for the sound of water filling the pipes and carefully inspect both connections for any signs of dripping or leaking. Finally, open the nearby faucet to confirm that water is flowing properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zOezzS_Xy7o</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8775-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qwX8iskwZvw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Dry the regulator and connections completely with a towel. Slowly turn the main water valve back on. As the system fills, listen for air to escape from the open faucets. Once water flows steadily, turn the faucets off. Thoroughly inspect the top and bottom union connections on the regulator for any signs of leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qwX8iskwZvw</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8775-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8A-JedNgNwk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Check and Test — How to Fix a Leak at a Faucet Supply Line Connection</video:title>
      <video:description>Slowly turn the water supply back on. Test the faucet by turning the handle through all positions: cold, warm, and hot. Let the water run for a few minutes to flush out any air or debris from the lines. Turn the water off completely and carefully check for any drips from the showerhead or leaks around the handle. It&apos;s a good practice to wait about 30 minutes to an hour to ensure no slow drips appear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8A-JedNgNwk</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8770-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s5loz2XrMag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect P-Trap — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>To fully remove the sink, the drain plumbing must be disassembled. Place a bucket underneath the U-shaped pipe, known as the P-trap, to catch water. Use channel-lock pliers to loosen the two large slip nuts: one connecting the trap to the vertical tailpiece from the sink, and the other connecting it to the waste pipe arm in the wall. Once loose, unscrew them by hand and remove the P-trap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s5loz2XrMag</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8770-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6__Vi6lMfnU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Take Apart Fixture — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Start by turning off the water supply to the sink.  Place a bucket or towel underneath the sink to catch any water that may spill. Loosen the slip nuts that connect the p-trap to the drain pipe and the tailpiece using channel-lock pliers or your hands. Once loose, unscrew the slip nuts and remove the p-trap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6__Vi6lMfnU</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8770-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ls3HGF-xs9I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Drain — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Use the channel lock pliers to loosen the nut at the bottom of the drain.  Remove the nut and remove the rubber gasket.  Then pull out the drain.  Once the drain is out wipe out any excess plumbers putty and clean out the drain opening in the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ls3HGF-xs9I</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8771-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tO7U400_frg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install new garbage disposal — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Attach the new garbage disposal to the sink flange, aligning it with the mounting bracket. Tighten the screws on the mounting bracket. Connect the dishwasher drain line to the garbage disposal, if applicable. Connect the discharge pipe to the garbage disposal and secure it with a hose clamp. Reconnect the power supply to the garbage disposal and test for proper operation. Test the sink for leaks by running water and checking all drain connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tO7U400_frg</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8771-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dQpPEudltI8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water and Check for Leaks — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Slowly turn on the shut-off valves for both hot and cold water by turning the handles to the left (counter-clockwise). Turn on the faucet and let the water run. Close the pop-up drain to fill the sink partially, then release it to test the drain connection under a full flow. Use a flashlight to carefully inspect all new plumbing connections, including the supply lines and the entire P-trap assembly, for any drips or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dQpPEudltI8</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8771-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ybkq-_ySjhk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Test — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>With all connections made, reinstall the dishwasher by carefully sliding it back into place under the counter and securing it with the screws. Reconnect the power to the dishwasher and garbage disposal. Turn the water supply back on. Place dry paper towels under all the new connections to easily spot any leaks. Run the dishwasher through a rinse or drain cycle to test the new drainage system. Check for any drips or leaks at the air gap, hose connections, and the P-trap assembly. If everything is dry, the installation is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ybkq-_ySjhk</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8768-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xxSC19U2zmA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Garbage Disposal Knockout Plug — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Look inside the inlet nipple on the garbage disposal where the hose was connected. New disposals come with a &apos;knockout plug&apos; blocking this inlet. To remove it, insert a flathead screwdriver into the nipple and tap the end of the screwdriver firmly with a hammer. This will break the plug and knock it into the disposal&apos;s grinding chamber. Reach into the disposal (with power OFF) and remove the piece of plastic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xxSC19U2zmA</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8768-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/174_NGK_0Ts/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Knock out plug — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>If your sink has a dishwasher connection, you will need to remove the knockout plug from the dishwasher inlet of the disposal. Use a long flathead screwdriver or chisel to avoid damaging the plug. Ensure all the broken pieces of the plug are removed before installing the disposal to prevent any issues. </video:description>
      <video:player_loc>https://www.youtube.com/embed/174_NGK_0Ts</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8768-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WHVNA06HSO8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Dishwasher Knockout Plug — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>If you are connecting a dishwasher drain hose, you must remove the knockout plug. Locate the dishwasher inlet on the upper side of the disposal. Place the tip of a screwdriver into the inlet and tap it firmly with a hammer or the palm of your hand to break the plastic plug loose. The plug will fall into the grinding chamber. Reach into the chamber and retrieve the plastic plug. Do not leave it inside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WHVNA06HSO8</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8767-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s4Il8Rrg8Bk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing Hoses and Pipes — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>If a dishwasher drain hose is attached to the disposal, use a screwdriver to loosen the hose clamp. Once loose, pull the hose off the disposal&apos;s inlet port. Next, locate the main drain pipe connected to the side of the disposal. Unscrew the slip nut connecting the pipe to the drain assembly. This can typically be done by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s4Il8Rrg8Bk</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8767-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jC_JpzCtIgw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Install New Drain Pipes — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>With the new strainer installed, assemble the new drain pipes. Use a hacksaw to cut the existing ABS drain pipe to the correct length. Dry-fit all new components, including the new tailpiece, P-trap, dishwasher wye, and connecting pipes. Once you confirm the fit, apply ABS cement to the pipe and fitting and press them firmly together, holding for a few seconds. Complete all connections to create the new drain system and reconnect the dishwasher hose to the wye fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jC_JpzCtIgw</video:player_loc>
      <video:duration>172</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8767-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hqp_v4IAqOU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Drain Pipes — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Begin by preparing the area for disassembly. Loosen the metal clamp on the dishwasher drain hose using a screwdriver and pull the hose off the garbage disposal&apos;s inlet port. Next, unscrew the plastic slip nuts that connect the PVC drain pipes to the disposal&apos;s discharge pipe and the adjacent sink drain. This will allow the plumbing to be moved out of the way. Have a bucket underneath to catch any residual water from the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hqp_v4IAqOU</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8766-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NuiaqKXdcqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Install New Drain Flange — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Take a small amount of plumber&apos;s putty from its container. Knead it in your hands until it becomes soft and pliable, then roll it into a thin rope about 1/4-inch thick. Apply this putty rope around the underside of the new drain flange. After cleaning the sink&apos;s drain hole with a microfiber towel, insert the new drain flange into the hole and press down firmly. From underneath the sink, install the rubber gasket and the large locknut. Tighten the locknut to secure the drain flange, which will cause excess putty to squeeze out around the flange inside the sink. Remove this excess putty and store it back in its container.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NuiaqKXdcqg</video:player_loc>
      <video:duration>128</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8766-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gRVMcuk8LQU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Strainer with Plumber&apos;s Putty — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Take a small amount of plumber&apos;s putty and roll it into a rope about the thickness of a pencil. Apply this rope of putty evenly to the underside of the new sink strainer&apos;s flange. Firmly press the new strainer down into the sink drain opening. From underneath the sink, slide the rubber gasket, then the paper friction washer, and finally the large locknut onto the strainer&apos;s threads. Hand-tighten the locknut to hold the assembly in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gRVMcuk8LQU</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8766-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Emy1Sls97nE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Drain Assembly — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Take a small amount of plumber&apos;s putty and roll it between your hands to form a thin snake. Wrap this putty snake around the underside of the drain&apos;s top flange. Insert the drain flange into the hole from inside the bowl, pressing it down firmly so the putty creates a seal. From underneath the bowl, place the rubber gasket over the threads, and then screw on the main body of the drain. Hand-tighten it firmly to ensure a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Emy1Sls97nE</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8765-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s38CjwBKZ34/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>First, prepare your work area. Clear out any items stored under the sink to give yourself plenty of room to work. Place a bucket directly underneath the J-shaped pipe, which is the P-trap. This is essential for catching the water and debris that will be released when you disconnect the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s38CjwBKZ34</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8765-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MHGA7ivhPwU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Begin by shutting off the hot and cold water supply using the shutoff valves located under the sink. Once the water is off, disconnect the drain line by loosening the compression nuts on the P-trap. Place a bucket underneath to catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MHGA7ivhPwU</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8765-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8hMo-HI56oY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet and Drain Plumbing — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Before starting the work, the water supply is turned off using the shutoff valves under the sink. A bucket is placed under the drain pipes to catch water. The old drain assembly, including the two P-traps, is disassembled by hand-loosening the slip nuts. The water supply lines are then disconnected from the old faucet. Using a basin wrench and pliers from underneath the sink, the mounting nuts holding the old faucet are removed. Once loosened, the homeowner pulls the old faucet out from the top of the countertop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8hMo-HI56oY</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8769-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hqp_v4IAqOU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Re-attach Disposal and Secure Mounting Ring — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>Place the disposal back on its support under the sink. Lift the unit and align the three tabs on its mounting collar with the sloped ramps on the upper mounting ring attached to the sink. Once aligned, slide the lower mounting ring over the tabs. Use one or two screwdrivers for leverage in the lugs to turn the ring clockwise. Continue turning until the disposal is pulled up tight against the sink flange and is securely locked in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hqp_v4IAqOU</video:player_loc>
      <video:duration>86</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8769-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JqWbT7pnxtQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lock Disposal in Place — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>With the disposal hanging from the mounting ring, rotate the ring clockwise. Use a flat-head screwdriver in one of the lugs for leverage. Continue turning until the disposal tabs are fully engaged and locked over the ridges on the mounting ring ramps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JqWbT7pnxtQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8769-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QZWIut6zwe8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Tightening of Disposal — How to Install a Garbage Disposal for the First Time</video:title>
      <video:description>To ensure the disposal is fully locked and sealed, use the disposal wrench to tighten the lower mounting ring as much as possible. For a final, secure lock, use channel lock pliers to grip one of the mounting screws and a lug on the ring, then squeeze to give it a final turn until it locks firmly into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QZWIut6zwe8</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8755-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-eUmsEmwWD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridge</video:title>
      <video:description>Before fully reassembling the faucet, turn the main water supply back on. Test the repair by turning the valve stem to let water run, and then turn it to the off position. Check carefully to ensure there are no more drips or leaks from the faucet or spout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-eUmsEmwWD4</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8755-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vjqi4Gl5YyA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks and Proper Operation — How to Stop a Dripping Single-Handle Kitchen Faucet by Replaci</video:title>
      <video:description>Before fully reassembling the faucet, test your work. Temporarily place the handle levers on the cartridge stems. Go back under the sink and turn the water supply valves back on by turning them counter-clockwise. Check for any leaks around the base of the cartridges. Operate the handles to test the water flow and ensure the drip is gone. Also, verify that the hot is on the hot side and cold is on the cold side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vjqi4Gl5YyA</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8755-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eHsFVR0Z6wY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridge</video:title>
      <video:description>With the faucet fully reassembled, slowly turn the main water supply back on. Turn the shower handle on and test its operation. Check for any leaks around the handle and escutcheon plate. Verify that the hot water comes on when turned to the left and cold water to the right. If the positions are reversed, you must shut the water off again, disassemble, and rotate the cartridge 180 degrees.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eHsFVR0Z6wY</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8759-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A9SqjSBJek4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove retaining clip/ring — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Ca</video:title>
      <video:description>After removing the handle, you&apos;ll find a retaining clip or ring that holds the cartridge in place. Use pliers or your fingers to carefully remove this clip, exposing the cartridge underneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A9SqjSBJek4</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8759-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CfLSjBqeAQU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen and Remove Valve Retainer — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing </video:title>
      <video:description>After removing the handle cover, you will see a black plastic component with four distinct notches on its top surface. This is the retainer that secures the valve cartridge. Using a specialized tool or the tips of needle-nose pliers, engage the notches and rotate the retainer counter-clockwise to unscrew and remove it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CfLSjBqeAQU</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8759-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AIY12lf_Ixs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Retaining Nut — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridg</video:title>
      <video:description>With the handle removed, use a pair of pliers or a wrench to loosen the brass retaining nut that holds the cartridge in place. Grip the nut and turn it counter-clockwise. Once it&apos;s loose, you can unscrew it the rest of the way by hand and set it aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AIY12lf_Ixs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8761-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PTNFjcJ3XzU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Protect work area — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridge</video:title>
      <video:description>Place a towel or mat under the sink to catch any spills or debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PTNFjcJ3XzU</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8761-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vZ62FcttwqI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare sink — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridge</video:title>
      <video:description>Lay down a towel on the counter to protect it from damage. Carefully turn the sink upside down and apply a bead of silicone sealant around the drain hole. Turn the sink back over and set it into place on the countertop. Wipe away excess silicone from the outside of the sink where it meets the counter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vZ62FcttwqI</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8761-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3SH1TYsASJg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Protect Cabinet — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridge</video:title>
      <video:description>Place a towel in the under-sink cabinet to catch any dripping water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3SH1TYsASJg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8763-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6qIAYcRQCsE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartrid</video:title>
      <video:description>Insert the repaired cartridge back into the faucet body. Hand-tighten it by turning it clockwise. Once it&apos;s snug, use the channel-lock pliers to give it a final quarter-turn to secure it fully. Place the handle back on the cartridge stem, insert the retaining screw, and tighten it with the Phillips head screwdriver. Snap the decorative cap back on top.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6qIAYcRQCsE</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8763-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h7UDJlTmOy4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartrid</video:title>
      <video:description>After flushing the lines, reassemble the faucet. Place the clean or new cartridge back into the faucet body, ensuring it&apos;s properly aligned. Screw the brass retaining nut back on and tighten it snugly with the adjustable wrench, but do not overtighten. Screw the decorative cap back on. Place the handle back on the valve stem and tighten the set screw with the Allen key. Finally, go under the sink and turn the hot and cold water supply valves back on by turning them counter-clockwise. Test the faucet for proper flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h7UDJlTmOy4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8763-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c4kBePjMZbU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartrid</video:title>
      <video:description>Reinstall the faucet components in reverse order. Place the cartridge back into the faucet body, ensuring the tabs on the cartridge align with the slots in the body. Screw the retaining nut back on by hand, then use pliers with a cloth for a final quarter-turn to tighten it securely. Place the handle back on the valve stem and tighten the set screw with the Allen wrench until snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c4kBePjMZbU</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8756-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JYADxcN4Sh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Cartridge, Seat, and Spring — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacin</video:title>
      <video:description>With the handle removed, use an adjustable wrench to loosen and unscrew the large retaining nut that holds the cartridge in place. Turn it counter-clockwise. Once the nut is removed, use a pair of channel-lock pliers to firmly grip the stem of the white plastic cartridge and pull it straight up and out of the faucet body. Finally, insert the Allen key into the faucet body to hook and remove the small rubber washer (seat) and the spring underneath it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JYADxcN4Sh4</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8756-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JG2JBkw-Ggo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extract the Old Cartridge — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Car</video:title>
      <video:description>Use a pair of pliers or a flathead screwdriver to pull the U-shaped retaining clip straight up and out of the valve body. Attach a Moen cartridge puller tool onto the cartridge stem, tighten it down, and then use pliers or a wrench to twist the cartridge back and forth to break it free. Pull straight out to remove the old cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JG2JBkw-Ggo</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8756-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1T8OmTeWLm8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attempt Cartridge Removal — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Car</video:title>
      <video:description>Use a specialized Moen cartridge puller tool to attempt to remove the old cartridge. First, use a small tool or pliers to remove the U-shaped retaining clip from the top of the valve body. Then, attach the cartridge puller to the valve stem and use a wrench or pliers to twist and pull the cartridge out. In this case, the cartridge is seized and the metal core breaks away, leaving the plastic housing behind.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1T8OmTeWLm8</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8757-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iNEFrc35ids/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Car</video:title>
      <video:description>Using a small flathead screwdriver, carefully pry off the decorative cap from the end of the faucet handle. With the cap removed, use a Phillips screwdriver to remove the retaining screw located inside. If the handle is seized on, you can use two spanners as levers behind the handle to gently pry it off. Once the handle is off, unscrew the chrome decorative shroud by hand to expose the valve cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iNEFrc35ids</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8757-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/prPewpGo_3A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Expose the Set Screw — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridg</video:title>
      <video:description>To begin the disassembly, locate the small decorative cap on the faucet handle. Use a small, flat tool or your fingernail to carefully pry this cap off. This will expose the set screw that holds the handle in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/prPewpGo_3A</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8757-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A8P97qQBSGg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridg</video:title>
      <video:description>Locate the small set screw on the underside of the faucet handle. Use the appropriate size Allen wrench to turn the screw counter-clockwise a few times until it is loose. You do not need to remove the screw completely. Once loose, pull the handle straight up and off the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A8P97qQBSGg</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8758-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zMam0dHGzFI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Retaining Clip — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartrid</video:title>
      <video:description>To begin, you must gain access to the cartridge. This involves turning off the water supply, removing the faucet handle and the decorative escutcheon plate (not shown). Once the valve is exposed, locate the C-shaped retaining clip at the top of the valve body. Use a small flathead screwdriver or needle-nose pliers to carefully pry this clip up and out of its groove. Do not lose this clip as it is required for installing the new cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zMam0dHGzFI</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8758-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nqpl-rakbgo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Retaining Clip — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Car</video:title>
      <video:description>Before starting, identify and remove the U-shaped retaining clip that holds the faucet cartridge in place. Using a screwdriver or the tip of the clip removal tool that comes with a new cartridge, pry the clip straight up and out of the valve body. Be careful not to lose this clip, as it is essential for securing the new cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nqpl-rakbgo</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8758-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AiQR3Nta0MA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Retaining Clip Removal — How to Stop a Dripping Single-Handle Kitchen Faucet by Repl</video:title>
      <video:description>Before starting the cartridge removal, ensure the main water supply is shut off. Remove the decorative faucet handle and trim plate. Using a pair of pliers, carefully pull out the small metal retaining clip that holds the cartridge in place within the valve body. Do not proceed without removing this clip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AiQR3Nta0MA</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8762-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JNVko87Y4fw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Cartridge — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartrid</video:title>
      <video:description>Before inserting the new cartridge, check inside the valve body and remove any old rubber washers or seals left behind. Align the new cartridge correctly—it is typically keyed with a notch (a &apos;V&apos; shape in this case) to fit only one way. Push the new cartridge firmly into the valve body until it is fully seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JNVko87Y4fw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8762-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8Lpq-VhJGx8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for New Cartridge Installation — How to Stop a Dripping Single-Handle Kitchen Faucet by Repl</video:title>
      <video:description>Before installing the new cartridge, inspect the inside of the brass valve body to ensure the old rubber gaskets did not get stuck inside. If they did, use a small pick to remove them. Wipe the inside clean with a towel. Apply a small amount of the included silicone grease to the two rubber gaskets and the large O-ring on the new cartridge. This helps create a good seal and makes future removal easier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8Lpq-VhJGx8</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8762-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XoKB7YRtzgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Valve and Cartridge — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing t</video:title>
      <video:description>Before installing the new cartridge, inspect the inside of the valve and ensure it is clean and free from debris or mineral deposits. Prepare the new cartridge by applying a small amount of waterproof grease to the seals for smooth installation and proper sealing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XoKB7YRtzgQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8764-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Kmn6LGWkRMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartrid</video:title>
      <video:description>Locate the hot water shutoff valve under the sink, typically a small oval handle on a pipe coming from the wall. Turn the valve clockwise until it stops to shut off the water supply. Return to the faucet and turn on the hot handle to drain any remaining water and release the pressure in the line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Kmn6LGWkRMM</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8764-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iXYjyjJTjDo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water at the Sink — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Ca</video:title>
      <video:description>To begin, locate the hot and cold water shutoff valves beneath the sink. Turn the handles clockwise (&apos;righty-tighty&apos;) until they are fully closed. This action stops the water flow to the faucet, making it safe to disconnect the plumbing. You can confirm the water is off by trying to turn on the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iXYjyjJTjDo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8764-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZXmXOgcy0WM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Plumbing — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartridge</video:title>
      <video:description>Locate the cold water supply valve under the sink and turn it to the off position. Then, open the kitchen faucet to drain any remaining water and relieve pressure in the line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZXmXOgcy0WM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8760-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BX3e1a-3DK4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lubricate and Install New Cartridge — How to Stop a Dripping Single-Handle Kitchen Faucet by Replaci</video:title>
      <video:description>Apply a liberal amount of plumber&apos;s grease to the O-rings and the black rubber seals on the new cartridge. This lubrication is crucial for an easy installation and for protecting the seals from damage. Carefully insert the new cartridge into the valve body, ensuring the &apos;H C&apos; marking is at the top to align the hot and cold water inlets correctly. Push the cartridge in until it is fully seated. Finally, re-insert the retaining clip to lock the new cartridge in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BX3e1a-3DK4</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8760-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UYEN5VH3Ysw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Cartridge — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing the Cartrid</video:title>
      <video:description>Prepare the new Moen cartridge for installation. Apply a light coat of the provided plumber&apos;s grease to all the rubber O-rings and gaskets on the cartridge. This lubrication helps it slide in smoothly and creates a better seal. Align the &apos;H C&apos; (Hot/Cold) markings on the cartridge correctly with the valve body (usually &apos;H&apos; on the left). Carefully slide the new cartridge into the valve body until it is fully seated. Secure it in place by re-installing the retaining clip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UYEN5VH3Ysw</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8760-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x_rY22yZFg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Cartridge and Clip — How to Stop a Dripping Single-Handle Kitchen Faucet by Replacing th</video:title>
      <video:description>Carefully push the lubricated new cartridge into the valve body. Align the tabs on the cartridge with the slots in the valve. The Moen 1225 can be inserted with either side up. Once inserted, use the provided plastic tool to slightly rotate the cartridge until the grooves for the retaining clip are perfectly aligned. Re-insert the retaining clip, pushing it all the way down into its slot to secure the cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x_rY22yZFg4</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8748-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q7eEJvh7-2I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Water Supply Line — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>With the water turned off, unscrew the coupling nut that connects the flexible water supply line to the bottom of the toilet tank&apos;s fill valve. This can usually be done by hand. Have a small towel or bucket ready to catch any residual water that drips out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q7eEJvh7-2I</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8748-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dG8YJjNu78Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove the Tank — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Place a towel on the floor to catch any drips. Use an adjustable wrench to disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts underneath the bowl and use a wrench to loosen and remove the nuts. Once the bolts are loose, carefully lift the tank straight up and off the toilet bowl. Place the tank on a protected surface, such as a towel laid over the toilet seat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dG8YJjNu78Q</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8748-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8G-hBeTnVo8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Place a small bucket or towel under the water supply line connection to catch any drips. Use a wrench to loosen and disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts under the rim of the toilet bowl. Use a wrench or socket to unscrew the nuts from these bolts. Once the nuts and washers are removed, carefully lift the toilet tank straight up and off the bowl. Place it on a protected surface like a towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8G-hBeTnVo8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8749-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gsDMBcuSNXE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Old Fill Valve — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Disconnect the water supply line from the bottom of the toilet tank. Locate the coupling nut connecting the line to the fill valve shank and unscrew it by turning it counter-clockwise. Once the supply line is off, locate the large plastic locknut holding the fill valve in place and unscrew it as well. A wrench or pliers may be needed if it&apos;s too tight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gsDMBcuSNXE</video:player_loc>
      <video:duration>98</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8749-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MPPJMOr8mjE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Fill Valve — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Place a towel on the floor beneath the tank connection to catch drips. Unscrew the water supply line connector from the bottom of the fill valve shank by turning it counter-clockwise. Then, unscrew the large plastic locknut that secures the fill valve to the tank. If it&apos;s too tight, use an adjustable wrench to loosen it carefully. Once the nut is removed, lift the entire old fill valve assembly out from inside the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MPPJMOr8mjE</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8749-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J2XFB1CmU4A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Fill Valve — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Using an adjustable wrench, loosen the nut connecting the water supply line to the fill valve shank underneath the tank. Once loose, unscrew it by hand. Then, unscrew the large plastic locknut that secures the fill valve to the tank. Lift the old valve assembly out from inside the tank. Use a small tool to pick out the old fiber washer from the supply line fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J2XFB1CmU4A</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8750-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S76uDankJ84/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Fill Valve — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Place the new fill valve into the hole in the tank. From underneath, thread the new plastic nut onto the fill valve and hand-tighten it. The wings on the nut make it easy to tighten by hand. Reconnect the water supply hose to the bottom of the new fill valve and hand-tighten it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S76uDankJ84</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8750-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/w738rD76c9M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flush Valve — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Insert the new flush valve into the large hole in the tank from the inside. From the outside, place the large gasket over the threads and then secure it with the new large plastic nut. Hand-tighten the nut, then use pliers to give it a final quarter-turn to ensure it&apos;s snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/w738rD76c9M</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8750-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xe_OyOOlNG4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Fill Valve — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Install the new fill valve into the tank. Insert the new valve into the hole on the left side of the tank. From underneath, thread the plastic locknut onto the valve&apos;s shank and tighten it by hand. Make sure it is snug, but do not overtighten to avoid cracking the plastic or the porcelain tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xe_OyOOlNG4</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8751-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LUC9hdeuk14/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Supply Line — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Now, install the new water supply line. Start by hand-threading the coupling nut on one end of the flexible braided line onto the plastic threads of the toilet&apos;s fill valve. Make this connection hand-tight only. Next, connect the other end of the supply line to the threaded outlet on the new shutoff valve. Hand-tighten this nut, then use a pair of small pliers to give it a final quarter-turn to ensure it&apos;s snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LUC9hdeuk14</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8751-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/v630MjERPUs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply to One-Piece Toilet — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>For this one-piece toilet, the standard T-valve that connects to the fill valve is not usable. Instead, disconnect the existing flexible water line from the shut-off valve. Install a 3/8-inch compression T-valve directly onto the shut-off valve. Reconnect the toilet&apos;s supply line to one side of the T-valve. Attach a new flexible supply hose to the other side of the T-valve, and connect the free end to the water inlet on the bidet seat. Use pliers to ensure all connections are snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/v630MjERPUs</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8751-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/txxrTl-t2-4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply Line — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Connect the water supply line from the shut-off valve on the wall to the fill valve inlet on the bottom of the toilet tank. The video uses a new 12-inch braided stainless steel line. Hand-tighten the connection at the tank first, then connect to the shut-off valve. Use pliers or a wrench for a final quarter-turn to ensure a snug fit. Place a sponge underneath to catch any drips. Once connected, slowly turn the shut-off valve to let water fill the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/txxrTl-t2-4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8752-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hcVJkh1IkYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>With everything reassembled, slowly turn the water supply valve back on. Allow the tank to fill completely with water. As it fills, and once it&apos;s full, carefully inspect all the new connections for leaks, particularly around the tank bolts and the large flush valve nut underneath the tank. Flush the toilet several times to ensure proper function and to confirm that the leaks have been completely resolved.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hcVJkh1IkYI</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8752-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FF0OKQBmIkk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Leaks — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>After the tank has filled with water, flush the toilet several times. Carefully inspect all connections for any drips or leaks. Check the area between the tank and the bowl, around the base of the three mounting bolts, and at the water supply line connection. If any leaks are found, tighten the corresponding nut slightly until the leak stops.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FF0OKQBmIkk</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8752-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qSmc0lbCFp8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Slowly turn the shut-off valves back on to restore water pressure to the system. Once the water is on, take a dry towel and wipe all the joints and connections you worked on. Carefully feel around each joint with your hand to check for any drips or moisture, which would indicate a leak. After waiting about 20 minutes, perform a final check.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qSmc0lbCFp8</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8753-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FJL7uIpWiGc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply and Drain Toilet — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Begin by turning off the water supply to the toilet. Locate the shut-off valve on the wall behind or beside the toilet and turn it clockwise until it stops. After the water is off, flush the toilet and hold the handle down to drain as much water as possible from the tank and bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FJL7uIpWiGc</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8753-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rwyLPWaxO_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Locate the water supply shut-off valve, typically on the wall behind the toilet, and turn it clockwise to stop the water flow. Remove the tank lid and place it in a safe spot. Flush the toilet and hold the handle down to drain as much water as possible from the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rwyLPWaxO_E</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8753-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ua_GC2yxRME/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — How to Replace a Toilet&apos;s Flexible Water Supply Line</video:title>
      <video:description>Locate the water supply valve, typically on the wall behind the toilet. Turn the handle clockwise until it stops to shut off the water supply. Flush the toilet to drain the water from the tank. Hold the flush handle down for a few extra seconds to allow as much water as possible to exit the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ua_GC2yxRME</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8745-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F9dnQ1bQl4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pour Vinegar and Let Mixture Sit — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Next, slowly pour half a cup of vinegar down the drain over the baking soda. This will cause a chemical reaction, creating foam and bubbles. Let this mixture sit and fizz in the disposal for a few minutes. The reaction helps to break down food particles, grease, and other debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F9dnQ1bQl4M</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8745-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MU6h19hWcBY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>DIY Cleaning with Baking Soda and Vinegar — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>As a DIY alternative, pour half a cup of baking soda directly into the garbage disposal. Let it sit for 30 minutes to absorb odors. After waiting, pour one cup of white vinegar on top of the baking soda. The mixture will fizz and foam, breaking down grease and grime. Let it foam for a few minutes, then finish by rinsing the disposal thoroughly with hot water from the tap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MU6h19hWcBY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8745-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DCuJERePKsI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Flush — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>After letting the baking soda and vinegar mixture sit for 15 minutes, boil another pot of water. Carefully pour this final pot of boiling water down the drain to flush away all the loosened debris and residue, leaving your drain clean and fresh.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DCuJERePKsI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8747-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IO00HHgBN-Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Snake the Drain Line — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Put on specialized cable-gripping safety gloves. Insert the head of the powered drain snake into the open drain pipe in the wall. Activate the snake and slowly feed the cable into the pipe. When you feel resistance, you&apos;ve reached the clog. Let the snake work on the clog, then slowly retract the cable, which will pull the mass of hair and gunk out with it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IO00HHgBN-Y</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8747-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mlM1kuECosQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Feed the Drain Snake — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>With your work gloves on, insert the head of the drain snake into the cleanout opening. Begin feeding the snake into the pipe, pushing it 8 to 12 inches at a time while simultaneously spinning the drum handle. This spinning action helps the snake navigate turns in the pipe and work its way through the clog. Continue feeding the snake until you feel you have reached and broken through the blockage. You may feel resistance, which could be a clog or simply a bend in the pipe; continue to gently push and rotate to move past it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mlM1kuECosQ</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8747-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5kEWGhk7pzY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Snaking with Small Head — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>With the drain snake set to forward rotation, carefully feed the cable with a small 1/2-inch half-blade head into the drain opening. Maintain control by keeping two hands on the cable, especially when navigating the initial P-trap. As you feed the cable deeper, you will feel resistance when you reach the clog. Work this area by pushing the cable forward and pulling it back repeatedly to break up the blockage. The standing water will begin to recede once the clog is penetrated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5kEWGhk7pzY</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8743-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m0S0hM6hGbU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Stopper Cap — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Begin by unscrewing the top chrome cap from the push-down drain stopper. If it is stuck, gently wiggle it back and forth to loosen it before twisting it counter-clockwise to remove.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m0S0hM6hGbU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8743-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aTKnHhiyuis/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Drain Stop — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Remove the drain stopper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aTKnHhiyuis</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8743-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uvbTgRZoLtI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Drain Stopper — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>To begin, remove the turn-and-push style drain stopper. Push the stopper down into the closed position to keep it from spinning. Grip the top cap of the stopper with a pair of channel-lock pliers and turn it counter-clockwise to unscrew it from its central post. After removing the cap, use a flathead screwdriver to unscrew the central screw that attaches the stopper mechanism to the drain&apos;s cross members.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uvbTgRZoLtI</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8742-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AcgErpZ_D0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Protect the Tub — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Begin by protecting the work area. Lay a drop cloth over the bathtub surface to prevent scratches from tools and to catch any falling debris from the old caulk. This also helps prevent the old caulk from clogging the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AcgErpZ_D0c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8742-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C6sMO3Zsztw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Prepare — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Gather the necessary tools for the job. You will need a wet/dry shop vacuum, screwdrivers to fit your drain cover (typically Phillips or flathead), a flashlight for better visibility into the drain, and protective gloves. It is also a good idea to place a protective mat on the shower floor. Before you begin, ensure the filter is removed from the wet/dry vac so it can safely collect water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C6sMO3Zsztw</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8742-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oo_Pi29nJ_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Supplies — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Gather the necessary tools and materials: a plastic bag for debris, pliers to bend the coat hanger, and a screwdriver to remove the shower drain cap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oo_Pi29nJ_E</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8744-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xiuKTOkbF_o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush Drain with Hot Water — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>After reassembling the drain, boil a pot of water. Carefully, using an oven mitt, pour the boiling water down the sink drain. This helps to flush out any remaining loose debris and provides a final sanitizing flush for the entire drain line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xiuKTOkbF_o</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8744-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F9dnQ1bQl4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush with Boiling Water — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Carefully pour a large pot of boiling water down the drain. This will flush out all the loosened debris, baking soda, and vinegar, and will also help to dissolve any remaining grease. The hot water helps to ensure the disposal and pipes are clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F9dnQ1bQl4M</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8744-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6oJGELQUAzI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pour Boiling Water to Clear Clog — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Once the water is boiling, carefully carry the pot to the sink. Slowly and steadily pour the entire pot of boiling water directly into the clogged drain opening. The intense heat will melt the solidified grease, allowing it to be flushed away down the drain pipe. Be prepared to repeat with a second or third pot if the clog persists.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6oJGELQUAzI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8746-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t5HYsuK2JBI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Drain Area — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Once the old drain is removed, thoroughly clean the area. It is very important to remove all of the old plumber&apos;s putty, dirt, grime, and any other junk from the surface of the bathtub around the drain opening. Also, ensure the threads of the drain pipe below the tub are clean and free of debris. This will ensure a proper, watertight seal for the new drain installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t5HYsuK2JBI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8746-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/brsFISgx6fM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Drain Area — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>After removing the old drain, thoroughly clean the area around the drain opening in the bathtub. Use your fingers or a putty knife to scrape away all of the old, dried plumber&apos;s putty. Ensure the surface is smooth and free of debris to allow the new drain to seal properly against the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/brsFISgx6fM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8746-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lzm2otoIkEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Drain Opening — How to Unclog a Bathtub Drain Filled with Hair</video:title>
      <video:description>Thoroughly clean the area around the drain opening on the bathtub surface. Scrape away any old plumber&apos;s putty and residue. Use a cleaner like Goo Gone on a paper towel to remove any sticky adhesive, ensuring a clean surface for the new putty. Also, clean the threads inside the drain pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lzm2otoIkEc</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8738-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7BVEtAGc6pQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle and Collar — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>With the set screw removed, grasp the faucet handle firmly and pull it straight up to remove it from the valve stem. This may require some wiggling if it&apos;s stuck due to mineral buildup. Next, unscrew the decorative outer collar that covers the main valve housing. If it&apos;s tight, use a rubber jar opener or a strap wrench to get a better grip without scratching the finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7BVEtAGc6pQ</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8738-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bVtRknrPv_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pull the First Handle — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>After freeing the handle by dealing with the stripped screw, the handle may still be stuck on the valve stem due to mineral deposits and corrosion. Position a faucet handle puller tool over the handle, ensuring its arms are securely hooked underneath the handle&apos;s base. Tighten the center screw of the puller against the valve stem. Continue tightening to apply steady pressure, which will force the handle off the stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bVtRknrPv_E</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8738-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JYADxcN4Sh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Cartridge, Seat, and Spring — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>With the handle removed, use an adjustable wrench to loosen and unscrew the large retaining nut that holds the cartridge in place. Turn it counter-clockwise. Once the nut is removed, use a pair of channel-lock pliers to firmly grip the stem of the white plastic cartridge and pull it straight up and out of the faucet body. Finally, insert the Allen key into the faucet body to hook and remove the small rubber washer (seat) and the spring underneath it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JYADxcN4Sh4</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8740-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8MDovJi7yuE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Stem — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Insert the new stem into the faucet body, ensuring that the rubber gasket at the bottom creates a good seal. Hand tighten the stem first, then use the socket wrench to secure it. Be careful not to overtighten the stem, as this can damage the new part. Gently tighten the stem and do not force it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8MDovJi7yuE</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8740-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uAUK2rpNtb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Adjust the Packing Nut — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>After the valve stem with the packing is inserted into the valve body, thread the packing nut on top. Hand-tighten it first, then use a wrench to snug it down. The goal is to tighten the nut just enough to compress the packing and create a seal that prevents water from leaking around the stem. It should not be so tight that it prevents the handle from turning easily. Find the right balance where the seal is effective, but the faucet handle remains operable. Be careful with your tools; the video shows a hand with a small cut as a warning against carelessness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uAUK2rpNtb4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8740-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Da12FnvJdd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace the packing and washer — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Separate the valve stem and packing nut. The leak is usually caused by a worn-out packing. Remove the old packing and washer. Install the new packing and washer. Then, reassemble the faucet by following the steps in reverse order. Install the new washer onto the valve stem and secure it with the screw. Reattach the packing nut to the valve stem and tighten it with the adjustable wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Da12FnvJdd4</video:player_loc>
      <video:duration>203</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8739-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r1IJFzxXdDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Faucet and Remove the Rod Assembly — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>First, locate and shut off the water supply to the outdoor faucet. Next, use a flathead screwdriver to remove the screw in the center of the faucet handle and pull the handle off. Use an adjustable wrench to turn the packing nut counter-clockwise to loosen and remove it. If the old packing material is stuck inside, use a small flathead screwdriver to gently pry it out. Temporarily place the handle back on the rod stem and turn it counter-clockwise to unscrew the rod from the back of the faucet body. Pull the entire rod assembly straight out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r1IJFzxXdDQ</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8739-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CyWrJ3G48HE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet Stem — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Place the jaws of an adjustable wrench around the packing nut, which is the large hexagonal nut located just behind the faucet handle. Turn the wrench counter-clockwise to loosen and unscrew the nut completely. Once the nut is loose, grip the handle and pull the entire stem assembly straight out from the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CyWrJ3G48HE</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8739-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cVM3IfhqivI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Handles — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Begin by removing the old faucet handles. Use a utility knife or a small flathead screwdriver to carefully pry off the decorative cap at the center of each handle. This will expose a screw. Use a Phillips screwdriver to loosen and remove the screw, then pull the handle straight off the valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cVM3IfhqivI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8737-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7BVEtAGc6pQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Begin reassembly by threading the bonnet nut back onto the faucet body by hand. Use the pipe wrench to give it a final quarter-turn to snug it down; do not overtighten. Screw the decorative collar back on. Place the handle back onto the valve stem, aligning it correctly. Re-insert the set screw and tighten it with the Allen wrench until snug. Finally, press the decorative cover plug back into place. Turn the water supply back on and check for any leaks around the handle base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7BVEtAGc6pQ</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8737-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9RGXxt1JGvY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Packing Nut — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Using an adjustable wrench, tighten the packing nut on one of the faucets. The packing nut is located on the valve body directly beneath the handle. Turn the nut clockwise just a small amount, about a quarter-turn, to compress the packing material inside and seal the leak around the valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9RGXxt1JGvY</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8737-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c4kBePjMZbU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Reinstall the faucet components in reverse order. Place the cartridge back into the faucet body, ensuring the tabs on the cartridge align with the slots in the body. Screw the retaining nut back on by hand, then use pliers with a cloth for a final quarter-turn to tighten it securely. Place the handle back on the valve stem and tighten the set screw with the Allen wrench until snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c4kBePjMZbU</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8736-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5J1WewbdCeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Locate the main water shut-off valve for the house, which is typically found outside near a hose spigot. Turn the handle on the valve to the off position to stop the flow of water to the entire house, preventing any water from leaking or spraying while you work on the plumbing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5J1WewbdCeQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8736-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4-gw-gWqbJw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off the Main Water Supply — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Locate the main water shut-off valve for the house, which is typically found in the basement or a utility closet where the water line enters the home. Turn the valve handle clockwise until it is fully closed to stop the flow of water into the house&apos;s plumbing system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4-gw-gWqbJw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8736-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LHg2XC3xhIg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Before beginning the repair, you must shut off the water to the faucet. Locate the hot and cold water shutoff valves, which are typically found in the cabinet directly beneath the sink. Turn the handles clockwise to close them. If your sink does not have local shutoff valves, as shown in the video, you will need to locate the main water shutoff valve for the entire house (often in the basement or a utility closet) and turn it off. After the water is off, open both faucet handles to drain any remaining water from the lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LHg2XC3xhIg</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8741-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Im8WXEeIq-s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather materials — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Show the replacement seal kit that will be used to fix the leaky faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Im8WXEeIq-s</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8741-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rUQYYKfbAGY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Replacement Parts — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Using an assorted faucet washer kit and an O-ring kit, find the correctly sized replacement parts. Match the old, damaged washer and O-ring with new ones from the kits to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rUQYYKfbAGY</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8741-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cP_KCmfsqvk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Seals — How to Fix a Dripping Frost-Free Outdoor Faucet</video:title>
      <video:description>Take the new O-rings from your repair kit. It&apos;s a good practice to apply a thin layer of silicone grease to them. Install the smaller O-ring into the bottom groove on the spout base, and the larger O-ring into the groove above it. Next, place the new white plastic split ring into the top of the faucet body. Make sure the split in this ring is positioned towards the back to align with the grub screw hole.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cP_KCmfsqvk</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8730-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vR9GQhQCXzk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Test Showerhead — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Screw the showerhead with the new gasket back onto the taped shower arm, turning it clockwise. Hand-tighten it securely. Avoid using a wrench, especially on plastic threads. Turn the shower water on and check the connection to ensure the leak is fixed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vR9GQhQCXzk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8730-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5cufp6visQU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Showerhead Holder — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>The host takes the new showerhead holder, which is the part that connects to the shower arm. He confirms it has a rubber washer pre-installed inside for sealing. He then carefully threads the holder onto the shower arm, turning it clockwise by hand. He tightens it until it is snug but is careful not to overtighten, as he points out that these parts are often plastic and can be easily broken with excessive force. Hand-tightening is sufficient for creating a seal with the washer and Teflon tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5cufp6visQU</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8730-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WhLyNKmys2g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Diverter — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Take the new shower head diverter and locate the threaded connection point. Make sure the rubber washer is properly seated inside. Thread the diverter onto the shower arm by turning it clockwise by hand until it is snug. If necessary, you can use pliers covered with a towel for a final quarter-turn, but be very careful not to overtighten and damage the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WhLyNKmys2g</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8735-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qfLzuQmGc_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the S-Shaped Shower Arm Extender — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>First, use a cloth or a small brush to clean any old Teflon tape, rust, or debris from the female threads of the wall fitting. Next, take your new S-shaped shower arm extender and wrap Teflon tape around the shorter, male-threaded end that will go into the wall. Wrap the tape clockwise 3-4 times. Now, insert the escutcheon (flange) over the threads if one is included. Thread the arm into the wall fitting by hand until it is snug. Use a wrench with a rag to give it a final quarter to half turn, ensuring the arm is pointing downwards at the desired angle. Do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qfLzuQmGc_w</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8735-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aTPuaXEvzmM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install_New_Shower_Arm — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>With the broken piece removed, prepare the new shower arm for installation. Wrap Teflon tape around the threads of the new shower arm in a clockwise direction. This ensures a watertight seal when screwed into the fitting. Insert the arm into the wall fitting and hand-tighten it by turning it clockwise until it is snug and angled correctly. Place the escutcheon plate over the pipe and slide it flush against the wall to cover the opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aTPuaXEvzmM</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8735-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5rlIUL7v5SQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Shower Arm and Head — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Unscrew and remove the old shower arm from the wall fitting. Wrap the threads of the new shower arm with Teflon tape in a clockwise direction. Screw the new arm into the wall and tighten it. Slide the decorative escutcheon plate flush against the tile. Wrap the exposed threads of the new arm with Teflon tape. Screw the new showerhead onto the arm and hand-tighten. Use pliers with a cloth to give it a final gentle turn to secure it and prevent scratching the finish. Peel off any excess Teflon tape for a clean look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5rlIUL7v5SQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8732-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4OLe-mraw9s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Shower Head — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Before removing the shower stall, the shower head and arm must be detached. The presenter explains that in many mobile homes, the shower arm is not secured to a stud but is only held by a nut against the drywall, which can cause it to become loose. To remove it, first unscrew the shower head itself if it&apos;s still attached. Then, unscrew the decorative flange, or escutcheon, that sits flush against the shower wall. Behind the flange, you will find a nut threaded onto the shower arm. Using a pair of pliers, loosen and unscrew this nut. This will allow the shower arm to be pulled out from the front. The presenter notes that the water has already been turned off and the assembly is very loose due to prior damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4OLe-mraw9s</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8732-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TcZpMLcEKGI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Showerhead — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Begin by turning the showerhead counter-clockwise to unscrew it from the shower arm pipe extending from the wall. While this can sometimes be done by hand, you may need a pair of channel-lock pliers or an adjustable wrench for extra leverage if it&apos;s stuck. Place a rag around the showerhead base before using pliers to prevent scratching the finish. Once loosened, continue unscrewing it by hand until it&apos;s completely detached.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TcZpMLcEKGI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8732-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K4Qxci-eRbo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Existing Showerhead — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Begin the removal process by unscrewing the existing showerhead from the old shower arm. Grasp the showerhead firmly and turn it counter-clockwise. In most cases, it can be removed by hand. If it is stuck, you may need to use pliers, but be sure to protect the finish with a towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K4Qxci-eRbo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8729-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YksuwpRH0qA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Shower Arm and Head — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Remove the old shower head and shower arm. Clean the threads on the pipe coming out of the wall. Apply new Teflon tape to the threads of the new shower arm and screw it into the wall fitting, tightening it with a wrench (use a rag to protect the chrome finish). Attach the diverter for the handheld shower to the new arm. Connect the hose and the handheld shower head to the diverter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YksuwpRH0qA</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8729-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6HzkBnWfHLo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Flush — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>If you removed the showerhead, carefully screw it back onto the shower arm, turning it clockwise until it is snug. Be careful not to over-tighten. Once reinstalled (or after scrubbing an attached head), turn on the water and let it run for a minute or two. This will flush out any remaining vinegar and loose particles from inside the showerhead, clearing the nozzles for a smooth, even spray.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6HzkBnWfHLo</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8729-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qfLzuQmGc_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Shower Arm — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Begin by removing your existing showerhead from the old shower arm. Then, carefully unscrew the old shower arm from the fitting inside the wall by turning it counter-clockwise. Use a wrench with a rag wrapped around the pipe to prevent scratching the finish. If the arm is stuck due to corrosion or mineral buildup, apply a penetrating oil like WD-40 to the threads inside the wall and let it sit for a while before trying again. Be cautious, as old, corroded threads can sometimes break off inside the wall fitting, which would complicate the repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qfLzuQmGc_w</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8728-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UneR27Cnr2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Shower Arm — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>The plumber prepares a new, longer shower arm for installation. He wraps the threads with Teflon tape and applies pipe dope over it to ensure a leak-proof seal. He hand-threads the new arm into the wall fitting, then uses the handles of a pair of channel-lock pliers inserted into the arm&apos;s opening to get leverage for the final tightening. He then screws the shower head onto the newly installed arm.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UneR27Cnr2c</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8728-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/01XNd-DHtEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Necessary Tools — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Before starting, gather the necessary tools for the job. You will need a screwdriver, a shut-off tool (also known as a water meter key) if you have a stop-and-waste valve, and a pair of pliers. This initial preparation ensures you have everything on hand to proceed smoothly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/01XNd-DHtEc</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8728-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2HFv3Xp1bBU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Shower Fixtures — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Begin disassembling the shower fixtures. If a shower curtain rod is present, use a drill or screwdriver to remove the screws holding its brackets to the wall and take it down. Next, remove the shower head. If you plan to reuse it, wrap a rag around it to prevent scratching the finish. Use channel-lock pliers to grip the shower head and turn it counter-clockwise to unscrew it from the shower arm. Repeat the process for the shower arm itself, gripping it with the pliers and turning it counter-clockwise to remove it from the pipe in the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2HFv3Xp1bBU</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8731-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0Hjl4nbtNcA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Teflon Tape — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Take a roll of Teflon tape and wrap it around the threads of the shower arm. Be sure to wrap it in a clockwise direction, which is the same direction you will be tightening the new showerhead. This prevents the tape from unraveling during installation and helps create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0Hjl4nbtNcA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8731-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qRhRK0LWDLs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Thread Tape — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Take the new roll of thread tape and wrap it tightly around the threads of the shower arm. It is important to wrap the tape in a clockwise direction, which is the same direction you will turn the showerhead to tighten it. This prevents the tape from bunching up or unraveling during installation. Wrap the tape around the threads 3 to 5 times for a good seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qRhRK0LWDLs</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8731-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rRC9VGoPnQc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Teflon Tape — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Take your roll of Teflon tape and wrap it around the clean threads of the shower arm. It&apos;s crucial to wrap the tape in a clockwise direction (the same direction you will tighten the new showerhead). This prevents the tape from unraveling as you screw on the new fixture. Apply two to three full wraps around the threads, ensuring it&apos;s snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rRC9VGoPnQc</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8733-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I6lUXowO_8E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reattach Shower Head and Test — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Screw the shower head assembly back onto the end of the new shower arm. Hand-tighten it securely. Turn on the water at the shower valve and divert the water up to the shower head. Check the connection at the wall for any signs of dripping or leaking to ensure the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I6lUXowO_8E</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8733-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C2r85dUBBfM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Shower Head and Final Test — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Briefly turn on the water to check the new connection for leaks. If it&apos;s sealed, turn the water off. Apply plumber&apos;s tape to the outer threads of the new shower arm. Screw the shower head on and hand-tighten. Turn the water back on and test the shower head to ensure there are no leaks from either connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C2r85dUBBfM</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8733-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iY8CPc-HBLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify the Source of the Leak — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Carefully inspect the leaking shower head while the water is running. Although water may be dripping from a lower point, trace the water flow upwards to its origin. In this case, the leak is identified at the threaded connection between the shower head assembly and the shower arm pipe coming out of the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iY8CPc-HBLc</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8734-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tk9GyY58dsA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Previous Shower Head — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Begin by gently turning your existing shower head counter-clockwise to unscrew it from the shower arm. If it is too tight to remove by hand, you may need to use a wrench. Be careful not to apply excessive force. Once the head is removed, peel off any old Teflon tape from the shower arm&apos;s threads. Finally, use a cloth or paper towel to clean the threaded end of the shower arm.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tk9GyY58dsA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8734-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dXFHDOl2wXs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Shower Head and Arm — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Begin by removing the existing showerhead. Using a pair of channel-lock pliers, grip the base of the showerhead and turn it counter-clockwise to unscrew it from the shower arm. Once the showerhead is removed, use the pliers, preferably with a towel wrapped around the pipe to prevent scratching, to grip and unscrew the old shower arm from the wall fitting by turning it counter-clockwise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dXFHDOl2wXs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8734-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lGL-HKQt16Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Existing Shower Fixtures — How to Replace a Shower Head and Shower Arm</video:title>
      <video:description>Begin by removing the existing shower fixtures. Unscrew the old shower head from the shower arm, which can usually be done by hand. Next, use a pair of pliers, preferably with a cloth to protect the finish, to grip and unscrew the shower arm from the water outlet pipe inside the wall. Turn counter-clockwise until it is completely detached.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lGL-HKQt16Y</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8724-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f8L3Ha8u5-k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the P-Trap — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>Now that the offset fitting has corrected the alignment, you can assemble the rest of the P-trap. Attach the tailpiece extension to the bottom of the sink drain. Then, connect the J-bend (the U-shaped portion of the trap) between the tailpiece extension and the offset fitting. Ensure all washers are properly seated before hand-tightening the slip nuts to create secure, leak-proof seals.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f8L3Ha8u5-k</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8724-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ill0xEmnyFQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Drain Plumbing — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>From underneath the sink, connect the rest of the drain plumbing. First, ensure the gasket is in place inside the slip nut for the drain tailpiece. Thread the tailpiece onto the bottom of the strainer body and tighten the slip nut using adjustable joint pliers. Next, ensure the P-trap washer is in place and connect the P-trap to both the tailpiece and the waste pipe in the wall. Tighten all slip nut connections with the adjustable joint pliers until they are snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ill0xEmnyFQ</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8724-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZRwt_xpNeYc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New P-Trap — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>Position the fully assembled new P-trap between the sink tailpiece and the wall drainpipe. Align the threads and hand-tighten the slip nuts at both connection points. Ensure the washers are properly seated as you tighten to create a secure seal. Tighten both nuts firmly by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZRwt_xpNeYc</video:player_loc>
      <video:duration>142</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8727-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJ6BM9Ac2sQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Assembly — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>Insert the pop-up drain assembly into the drain hole from the top of the sink basin. From the underside, place the rubber washer over the drain&apos;s tailpiece. Thread the mounting nut onto the tailpiece and tighten it securely against the bottom of the sink to create a watertight seal. Use a wrench or pliers to ensure the nut is fully tightened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJ6BM9Ac2sQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8727-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NjrWSi4fnd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Secure New Faucet — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>Prepare the new faucet for installation. Place the clear plastic gasket over the faucet&apos;s hoses and seat it firmly against the base. Carefully feed the hot and cold water lines and the threaded mounting shank through the hole in the countertop. Position the faucet so it is centered and facing the correct direction. From underneath, slide the large washer and then the mounting nut over the hoses and onto the threaded shank. Hand-tighten the nut to hold the faucet in place, then use the included tool or a basin wrench to fully tighten it, securing the faucet to the sink deck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NjrWSi4fnd4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8727-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9rSD2zMhzps/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install RO Drinking Faucet — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>Choose a suitable flat surface on your sink or countertop for the faucet. If no pre-existing hole is available, you will need to drill one between 7/16 to 1.5 inches in diameter. Clean and dry the area thoroughly. Assemble the top parts of the faucet by sliding the chrome base plate and then the black rubber washer onto the faucet stem. Insert the faucet stem through the hole in the sink. From underneath the sink, slide the second rubber washer and the plastic wing nut onto the threaded faucet stem. Hand-tighten the wing nut to secure the faucet in place. Next, attach the 3/8-inch to 1/4-inch push-in converter fitting to the bottom of the faucet stem. Insert the 3/8-inch white tubing firmly into the converter fitting and secure it by inserting a blue locking clip. Measure and cut the tubing to length, ensuring you leave some slack for future maintenance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9rSD2zMhzps</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8726-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Emy1Sls97nE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Sink — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>Apply a generous bead of clear silicone sealant around the top rim of the salad bowl sink using a caulking gun. Position the sink under the countertop, aligning it with the hole. Press it firmly into place. To hold the sink while the silicone cures, drive several screws through the cabinet&apos;s support structure so they press against the sink&apos;s underside rim, securing it tightly against the countertop. Allow the silicone to dry for at least 12 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Emy1Sls97nE</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8726-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mprNy5P9BMQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure with Clips and Allow to Cure — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>With the sink pressed into place, attach the undermount sink clips. Slide the slotted bracket over each anchoring post so that one end rests on the countertop and the other end presses down on the sink&apos;s rim. Thread a wingnut onto each post and hand-tighten it to secure the sink. Go around and tighten all the wingnuts evenly to apply consistent pressure. Do not overtighten. Once the sink is secured, you must wait at least one hour for the silicone caulk to set before attempting to move or flip the countertop into its final position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mprNy5P9BMQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8726-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/npWKxgeM8_c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Seal the Sink — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>With assistance, carefully lift the heavy sink and lower it onto the newly built support frame. Adjust its position to be centered and flush with the cabinet front. Once positioned, apply a generous, continuous bead of 100% silicone sealant around the top flange of the sink. This sealant will create a waterproof bond between the sink and the underside of the countertop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/npWKxgeM8_c</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8723-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WqspwZorLGU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Sink — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>Before removing the old sink, shut off the water supply by turning the handles on the angle stop valves clockwise until they stop. Disconnect the hot and cold water supply lines from the valves using channel-lock pliers. Disconnect the P-trap from the wall drain and the sink tailpiece. Carefully cut any old caulk between the sink and wall with a utility knife. Lift the sink basin off the pedestal, then remove the pedestal itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WqspwZorLGU</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8723-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tiG0ZQ7-D3s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Work Area and Remove Old Faucet — How to Install a Bathroom Sink and Faucet from Start to Fi</video:title>
      <video:description>Go under the sink and turn off the hot and cold water shut-off valves completely. Place a bucket underneath to catch any draining water. Use an adjustable wrench to disconnect the water supply lines from the old faucet. Once the lines are disconnected, unscrew the mounting nuts holding the old faucet in place and lift it out from the top of the counter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tiG0ZQ7-D3s</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8723-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8aEl5TyRGVQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Faucet — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>First, shut off the hot and cold water supply by turning the shut-off valves under the sink clockwise. Place a bucket underneath to catch drips. Use a basin wrench or adjustable wrench to disconnect the water supply lines from the old faucet. Unscrew the mounting nuts holding the old faucet in place. Once loose, lift the entire old faucet assembly out from the top of the sink and clean the area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8aEl5TyRGVQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8725-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r25zMpTPotA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Plumbing and Test for Leaks — How to Install a Bathroom Sink and Faucet from Start to Fin</video:title>
      <video:description>Once the clog is cleared, reassemble the drain plumbing. Ensure the pipe threads and conical washers are clean. Place the washers with the tapered side pointing into the pipe connection they are sealing. Reattach the P-trap and hand-tighten all the slip nuts securely. Wipe the connections dry. Finally, run hot water into both sinks for at least a minute and check underneath for any drips to ensure all connections are watertight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r25zMpTPotA</video:player_loc>
      <video:duration>157</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8725-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M1d_puqCq3A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Connections and Testing — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>With the sink in place, make the final plumbing connections. Connect the P-trap to the sink&apos;s tailpiece. Connect the flexible, braided stainless steel supply lines from the new shut-off valves to the hot and cold stems of the faucet. Hand-tighten the connections first, then give them a final snug with a wrench. Turn the water back on at the main and at the new shut-off valves, and test the faucet for leaks and proper operation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M1d_puqCq3A</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8725-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A5G3lQXtBCQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Check for Leaks — How to Install a Bathroom Sink and Faucet from Start to Finish</video:title>
      <video:description>Turn on the faucet and let the water run for a minute to test the drain flow and check for any leaks. Carefully inspect all the connections you just tightened, including both slip nuts on the P-trap and the pivot rod retaining nut, to ensure they are dry. If everything is dry and the water drains quickly, the job is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A5G3lQXtBCQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8716-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8VLj22nwWdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify A.O. Smith Water Heater Age — How to Decode Your Water Heater&apos;s Serial Number to Find Its A</video:title>
      <video:description>Next, the plumber examines an A.O. Smith water heater. He points to the information label and the serial number. For this older model, the serial number begins with letters and numbers that directly state the month and year, such as &apos;MA95&apos; for March 1995. He also points out an ANSI standard date on the label (e.g., 1991) as a way to double-check and confirm the manufacturing decade.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8VLj22nwWdE</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8716-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8VLj22nwWdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Reliance Water Heater Age — How to Decode Your Water Heater&apos;s Serial Number to Find Its Age</video:title>
      <video:description>Finally, the plumber examines a Reliance water heater. He finds the information label and locates the serial number. For Reliance, after the initial letter(s), the first two digits indicate the year of manufacture. In this example, the number is &apos;00&apos;, meaning the year 2000. The next two digits, &apos;41&apos;, indicate the week of the year it was manufactured. He confirms the decade by looking at the ANSI standard date of 1998 on the label.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8VLj22nwWdE</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8716-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TtaXlY9uFzM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Decode the Serial Number — How to Decode Your Water Heater&apos;s Serial Number to Find Its Age</video:title>
      <video:description>To find the age, you need to decode the serial number. The easiest way is to use a search engine and type in the manufacturer&apos;s name followed by &apos;hot water tank age chart&apos;. This will provide instructions specific to your brand. For example, the video shows that for a Hotpoint tank with serial number &apos;PC 0711223547&apos;, the &apos;07&apos; represents the month (July) and &apos;11&apos; represents the year (2011). The video also provides decoding charts for Hotpoint, Sears, John Wood, Rheem/Ruud, and Bradford White for reference.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TtaXlY9uFzM</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8714-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8VLj22nwWdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify A.O. Smith Water Heater Age — How to Decode Your Water Heater&apos;s Serial Number to Find Its A</video:title>
      <video:description>Next, the plumber examines an A.O. Smith water heater. He points to the information label and the serial number. For this older model, the serial number begins with letters and numbers that directly state the month and year, such as &apos;MA95&apos; for March 1995. He also points out an ANSI standard date on the label (e.g., 1991) as a way to double-check and confirm the manufacturing decade.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8VLj22nwWdE</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8714-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8VLj22nwWdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Reliance Water Heater Age — How to Decode Your Water Heater&apos;s Serial Number to Find Its Age</video:title>
      <video:description>Finally, the plumber examines a Reliance water heater. He finds the information label and locates the serial number. For Reliance, after the initial letter(s), the first two digits indicate the year of manufacture. In this example, the number is &apos;00&apos;, meaning the year 2000. The next two digits, &apos;41&apos;, indicate the week of the year it was manufactured. He confirms the decade by looking at the ANSI standard date of 1998 on the label.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8VLj22nwWdE</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8714-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TtaXlY9uFzM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Data Tag and Serial Number — How to Decode Your Water Heater&apos;s Serial Number to Find Its </video:title>
      <video:description>Walk up to your hot water tank and look for a large sticker on its side. This is the data tag. This tag contains key information, including the manufacturer&apos;s brand name (e.g., Hotpoint, John Wood) and, most importantly, the serial number. The serial number is a unique string of letters and numbers that encodes the manufacturing date.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TtaXlY9uFzM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8713-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PvpnBWbyy94/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Old Unit — How to Decode Your Water Heater&apos;s Serial Number to Find Its Age</video:title>
      <video:description>Start by looking at the information label on the water heater. Verify that the date of installation and the warranty information are accurate.  Check the expected lifespan and be aware of new energy guidelines which may cause you to need a new tank that requires a larger footprint. Check the dimensions of the old tank and compare that to the new tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PvpnBWbyy94</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8713-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zw0HEo8ovDE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect the Water Heater Unit — How to Decode Your Water Heater&apos;s Serial Number to Find Its Age</video:title>
      <video:description>The technician opens the exterior access panel to the Girard tankless water heater. He visually inspects the unit and points out the model number sticker (Model GSWH-2) on the inside of the door. He also shares an anecdote that the motorhome was originally supposed to have a standard tank water heater but was fitted with a tankless model due to supply chain issues during its manufacture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zw0HEo8ovDE</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8713-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uAUTnTNH9bA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Data Label — How to Decode Your Water Heater&apos;s Serial Number to Find Its Age</video:title>
      <video:description>Find the data label on the side of the Rinnai tankless water heater. This label contains important information, including the model and serial number. If the label is in an awkward or hard-to-see location, use your smartphone&apos;s camera to take a clear picture of it for easier reference.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uAUTnTNH9bA</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8715-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oklQZ7hPeTE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Find the Serial Number — How to Decode Your Water Heater&apos;s Serial Number to Find Its Age</video:title>
      <video:description>Once you have found the rating plate, scan it to find the serial number. It will be clearly labeled as &apos;SERIAL NO.&apos;. The serial number is a sequence of letters and numbers unique to your unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oklQZ7hPeTE</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8715-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uAUTnTNH9bA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Data Label — How to Decode Your Water Heater&apos;s Serial Number to Find Its Age</video:title>
      <video:description>Find the data label on the side of the Rinnai tankless water heater. This label contains important information, including the model and serial number. If the label is in an awkward or hard-to-see location, use your smartphone&apos;s camera to take a clear picture of it for easier reference.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uAUTnTNH9bA</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8715-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TtaXlY9uFzM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Data Tag and Serial Number — How to Decode Your Water Heater&apos;s Serial Number to Find Its </video:title>
      <video:description>Walk up to your hot water tank and look for a large sticker on its side. This is the data tag. This tag contains key information, including the manufacturer&apos;s brand name (e.g., Hotpoint, John Wood) and, most importantly, the serial number. The serial number is a unique string of letters and numbers that encodes the manufacturing date.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TtaXlY9uFzM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8705-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bUKEPB50E6w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Before full reassembly, check for leaks. Temporarily install the handle. Go back to the main water valve and turn it back on. Open other faucets in the house to bleed air from the system until a steady stream flows, then turn them off. Return to the shower, turn the handle on and off, and carefully inspect around the collar and cartridge for any signs of dripping water. If there are no leaks, you can proceed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bUKEPB50E6w</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8705-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5J1WewbdCeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the New Fixtures — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Go back to the main water shut-off and turn the valve back on. Return to the shower and turn on the water using the new handle. Check for any leaks from the valve or fittings. Pull the diverter on the tub spout to send water to the shower head and test its function. The dripping problem should now be resolved.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5J1WewbdCeQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8705-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AZF_r-HxHDs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cool, Clean, and Test — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>After soldering, allow the valve and pipe to cool down completely on their own. Once cooled, turn the handle on the new valve to the &apos;off&apos; position. Go to the main water shut-off and turn the water back on for the entire house. Return to any faucets that were opened to drain the lines and close them once water flows steadily. Go back to the newly installed valve, wipe it dry with a rag, and carefully inspect the soldered joint for any signs of dripping or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AZF_r-HxHDs</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8707-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x4x1BN9XddM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access and Remove the Old Valve Body — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>To remove the old valve, you will need to access it from behind the wall. This may involve cutting an access panel in the drywall on the other side of the shower wall. Once you have access, use two pipe wrenches or adjustable wrenches—one to hold the water pipe steady and the other to loosen the union nuts connecting the hot and cold water lines to the valve body. After disconnecting the water lines and the pipes leading to the shower head and tub spout, the old valve can be removed from the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x4x1BN9XddM</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8707-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NLM5SaKFY3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Soldering the New Moen Valve — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>After removing the old valve, clean the ends of the existing copper pipes using sandpaper or a deburring tool. Dry-fit the new Moen Posi-Temp valve with new copper pipes and fittings. Ensure the valve is oriented correctly with the &apos;UP&apos; marking facing upwards. Apply flux to all cleaned pipe ends and fittings. With fire precautions still in place, use a torch and lead-free solder to connect the new valve to the hot, cold, shower riser, and tub spout pipes. Once all joints are soldered, wipe them with a wet rag to remove excess flux.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NLM5SaKFY3g</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8707-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9-O2bfxka8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fitting the Valve and Pipes — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>With the valve body, first attach the black plaster ground using the two escutcheon screws. This piece helps position the valve correctly within the wall. Determine if you have a thick or thin wall, as this affects valve placement. The center of the valve should be 32 inches from the floor of the tub. Begin by connecting the valve to the tub drop outlet pipe. Measure the distance, cut a piece of 1/2&apos; copper tubing to length, and dry fit it using a copper coupling. Repeat this process for the hot water inlet, cold water inlet, and the shower riser outlet, using slip couplings for easier alignment. This dry-fitting stage ensures all pipes are the correct length and angle before soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9-O2bfxka8A</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8702-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wIOMkQChea8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Begin by locating the main water shut-off valve for your home, which is usually found near the water meter outside or in a basement/utility closet. Turn the valve clockwise to completely stop the flow of water. Once the water is off, go back to the faucet you are working on and open the handle to drain any remaining water left in the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wIOMkQChea8</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8702-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GQ1DRy7Lkpo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Replacement — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Before beginning the replacement, shut off the main water supply to the house using the main shutoff valve. Then, go to a faucet (preferably on an upper floor) and open it to drain the remaining water and relieve pressure in the pipes. Place a bucket under the PRV to catch any water that will spill out during removal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GQ1DRy7Lkpo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8702-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QmCbcwkVDpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Prepare — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Before starting the replacement, locate your main water shut-off valve and turn it completely off. To confirm the water is off and to drain the pipes, open the sink faucet and a nearby bathtub faucet. The bathtub is at a lower height and will help drain the system more effectively. Place a bucket under the sink to catch any remaining water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QmCbcwkVDpQ</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8709-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/P4Zya4C2nbw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Faucet Trim Kit — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>After the wall is tiled and grouted, proceed with the final installation. Screw the waterfall spout onto its corresponding pipe outlet. Place the square escutcheon plate over the mixing valve, aligning it with the spout. Slide the handle onto the valve cartridge stem and secure it by tightening the small set screw on the underside with a screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/P4Zya4C2nbw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8709-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wA3NsRi5V34/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Bed and Clean the Tiles — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Once all sheets are in place, use a grout float to firmly but gently tamp the tiles down, embedding them into the mortar and ensuring a flat, level surface. Pay special attention to the transition from the main bathroom floor to the shower floor. Feel the surface with your hand to check for any lippage. Use a damp sponge to clean any excess mortar off the tile faces. Finally, use a soft paintbrush and a carpet knife to carefully clean out any mortar that has squeezed up into the grout joints, ensuring uniform depth for grouting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wA3NsRi5V34</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8709-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dlB0Tbt2R3c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cure and Final Preparation — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Once the grout is smoothed, carefully remove the protective plug and plastic wrap from the drain opening. Allow the grout to dry and cure completely according to the product&apos;s instructions before installing the new flange repair ring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dlB0Tbt2R3c</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8710-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xs2GXur9fPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Valve Assembly — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Before soldering, the plumber removes the pressure gauges and the rubber O-rings from inside the valve to protect them from the torch&apos;s heat. He cleans the pipe ends and fittings and applies flux to all surfaces. He fits the assembly into the gap, then uses a propane torch to heat the joints evenly. Once the pipe is hot enough, he touches the lead-free solder to the joint, and it is drawn into the fitting by capillary action, creating a permanent, watertight seal. After soldering, he wipes the hot joints clean with a wet rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xs2GXur9fPM</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8710-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V4vCWNqvH1o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder Pipe Connections — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Apply a thin layer of flux to the cleaned ends of the copper pipes and the inside of the fittings. Assemble the joint and use a propane torch to heat the fitting evenly. Once the copper is hot enough, touch the solder wire to the joint. The heat will draw the molten solder into the joint, creating a solid, watertight connection. Repeat for all necessary connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V4vCWNqvH1o</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8710-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4bojdmljD4Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Joints — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Place a wet towel or heat shield behind the pipe to protect the tile. Using a propane torch, heat the joints of the assembly, focusing the heat on the fittings, not the pipe itself. Heat the joint until it&apos;s hot enough to melt lead-free solder upon contact. Touch the solder to the edge of the joint, and capillary action will draw it in to create a seal. Solder all connections, then wipe away any excess solder drips with the torch off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4bojdmljD4Y</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8711-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cBADiFRxJRE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Shutoff and Rebuild Riser — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Install a shutoff valve and begin rebuilding the riser. The plumber uses the cutter&apos;s deburring tool to remove any burrs or rough edges from the inside of the copper pipe and ensure a smooth, even surface for proper fitting connections and prevent leaks or flow restrictions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cBADiFRxJRE</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8711-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f1XEkVi3DLo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Prepare for Valve Installation — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Position the shower valve against the support beam and mark the pipe connection points. Use a tape measure to determine the exact lengths of copper pipe needed to connect the hot and cold supply lines to the valve inlets. Use a pipe cleaner brush to thoroughly clean the inside of the pipes and the outside of the fittings. Dry-fit all the cut pipe pieces and fittings together with the valve to verify that everything aligns correctly before soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f1XEkVi3DLo</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8711-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o-UVrvWbu28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pipe and Fitting Preparation — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Before soldering, prepare all components. Cut the copper pipes for the shower riser and tub spout to the necessary lengths using an auto-cut tool or a standard pipe cutter. Use emery cloth to thoroughly clean the outside ends of the copper pipes and the inside of all fittings, including the valve ports and elbows, until they are shiny. This is crucial for a proper solder joint. Next, using pliers and a screwdriver, remove the plastic valve cartridge and the side stops from the brass valve body to protect them from heat damage during soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o-UVrvWbu28</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8712-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ec5ZIdyvfNA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch Drywall — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Once the plumbing is complete and tested for leaks, patch the wall. First, seal the plastic vapor barrier with a suitable tape. Cut the piece of drywall that was previously removed to fit snugly around the new box. Secure it to the studs with drywall screws. Bevel the edges of both the patch and the existing wall with a utility knife to create a V-groove for a stronger joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ec5ZIdyvfNA</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8712-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sg__SSyPdqk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cap and Test the System — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Before closing up the wall, it is essential to test the entire plumbing system for leaks. Use a test plug to cap the shower head&apos;s drop ear elbow. Use a push-to-connect cap, like a SharkBite cap, to temporarily seal the end of the tub spout pipe. With the valve&apos;s cartridge still in place, turn on the main water supply and check all connections (soldered, threaded, and crimped) for any signs of dripping or leaks. Once you confirm the system is watertight, you can proceed with installing the backer board.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sg__SSyPdqk</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8712-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MCGf9VH0m-4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Seams and Corners — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>To complete the waterproof system, seal all seams and corners. Apply thin-set mortar over any seam where membrane sheets overlap, and embed a strip of Kerdi-Band. Do the same for the transition from the floor to the walls. In the inside corners of the shower, use pre-formed Kerdi-Kereck corners, embedding them in mortar to ensure a seamless waterproof seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MCGf9VH0m-4</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8703-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QvbuciDzY00/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Final Trim Plate and Handles — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Once the valve stems are extended, the final trim can be installed. Place the large decorative cover plate, or escutcheon, over the valve body, fitting it against the wall. Then, slide the shower handles onto the newly extended stems. Secure each handle by tightening its integrated set screw, typically located on the side or underside, using an Allen key. This completes the installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QvbuciDzY00</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8703-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UneR27Cnr2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Shower Fixtures — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>With the leak fixed and the valve checked, the plumber reassembles the shower trim. He reinstalls the escutcheon plate, screws it into place, then puts the handle back on the valve stem and secures it with the screw. The job is now complete, having successfully replaced the broken shower arm and verified the integrity of the valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UneR27Cnr2c</video:player_loc>
      <video:duration>103</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8703-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e2rtFpKCsjM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Trim and Fixtures — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Begin the final assembly by inserting the valve cartridge into the new valve body. On the shower side, install the shower arm elbow. Secure the mounts for the sliding shower bar, using a level for correct placement and an Allen key to tighten. Apply silicone sealant around the mounts for waterproofing. Attach the shower hose and head. Finally, install the main valve&apos;s escutcheon plate and handle, securing them with the provided screws and an Allen key.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e2rtFpKCsjM</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8704-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UEC_eXTkge0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Removing Old Shower Trim — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Back in the shower, the handle and escutcheon (trim plate) of the old valve are removed using screwdrivers. This exposes the valve body and its mounting within the tile wall. The existing hole in the tile is inspected to determine if it needs to be enlarged for the new valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UEC_eXTkge0</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8704-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5J1WewbdCeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create an Access Panel — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>To access the valve from behind, first drill a pilot hole through the center of the valve opening from the shower side to the back wall. On the back wall, use the pilot hole as a center point to mark a 12x12 inch square. Use a multi-tool or drywall saw to carefully cut along the marked lines and remove the section of drywall, exposing the shower valve and surrounding pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5J1WewbdCeQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8704-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/klfueGAEM_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Tile Surface — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Using an oscillating multi-tool with a scraper blade attachment, carefully clean the surface of the tiles immediately surrounding the valve opening. Scrape away any dried thin-set, grout, or other construction debris. This ensures the new escutcheon plate will sit perfectly flat against the wall, which is critical for a proper waterproof seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/klfueGAEM_E</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8706-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wA3NsRi5V34/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Bed and Clean the Tiles — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Once all sheets are in place, use a grout float to firmly but gently tamp the tiles down, embedding them into the mortar and ensuring a flat, level surface. Pay special attention to the transition from the main bathroom floor to the shower floor. Feel the surface with your hand to check for any lippage. Use a damp sponge to clean any excess mortar off the tile faces. Finally, use a soft paintbrush and a carpet knife to carefully clean out any mortar that has squeezed up into the grout joints, ensuring uniform depth for grouting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wA3NsRi5V34</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8706-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rLkt8_D6R-I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Waterproofing Membrane — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Take a pre-cut sheet of the waterproofing membrane and carefully place it onto the wet mortar, aligning one edge with your laser line. Starting from the center, use the flat side of your trowel to firmly press the membrane into the mortar. Work your way out towards the edges, applying pressure at a 45-degree angle to embed the fleece fabric fully and squeeze out any air bubbles. Ensure the membrane is pressed firmly into any inside corners.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rLkt8_D6R-I</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8706-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/v49-bbIo-MM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Overlap Wall Membrane — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Trowel thin-set mortar onto the shower walls. Cut the waterproof membrane about 5 inches longer than needed. Press the membrane firmly onto the wall, then embed the bottom 5-inch flap into fresh mortar on the shower pan floor. Use a trowel to smooth everything out. Where the membrane meets in the corners, make a 45-degree relief cut, overlap the pieces, and embed them in mortar.</video:description>
      <video:player_loc>https://www.youtube.com/embed/v49-bbIo-MM</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8708-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GdoFyHd-bHU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the handle — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Locate the set screw on the underside of the shower handle. Use an Allen key of the correct size to loosen and remove the set screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GdoFyHd-bHU</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8708-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C2HIL9xWVGo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert Wrench &amp; Turn Counterclockwise — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Locate the small access hole on the underside of the shower handle&apos;s base. Insert a 7/64 inch Allen wrench into this hole, engaging the set screw inside. Turn the Allen wrench counter-clockwise to loosen the set screw. You do not need to remove it completely at this stage, just loosen it enough to allow the handle to be removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C2HIL9xWVGo</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8708-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AMtBaN6LalA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Shower Handle — How to Replace a Shower Valve Through a Tiled Wall</video:title>
      <video:description>Locate the set screw on the shower handle, which is often an Allen screw hidden on the underside. Use the correctly sized Allen key from a set to loosen the screw by turning it counter-clockwise. You do not need to remove the screw completely. Once loose, pull the handle straight off the cartridge stem to expose the anti-scald device.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AMtBaN6LalA</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8698-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zsh_WrCFG-A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure the Repair Ring — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Carefully place the Oatey Fix-It Flange Repair Ring onto the adhesive-coated old flange. Press it down firmly to ensure good contact and spread the adhesive. Align the ring so that the toilet bolt slots are positioned correctly, typically parallel to the back wall. Then, use wood screws to secure the repair ring to the subfloor through the designated screw holes, ensuring the new flange is stable and immobile.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zsh_WrCFG-A</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8698-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IjZej0pGSR0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit Flange Spacer — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Before applying any sealant, perform a dry fit of the toilet flange spacer. Place the spacer over the old flange and check its alignment. Confirm that the mounting holes on the spacer line up with solid parts of the subfloor where you can drive screws. Also, check the slots for the toilet bolts to ensure they will be positioned correctly for the toilet installation. This is the time to make any adjustments to the plan.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IjZej0pGSR0</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8698-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TAEwudpeQFo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flange Bolts — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Take the new brass flange bolts included in the kit. Insert them into the slots on the toilet flange, ensuring they are positioned parallel to the back wall and are about six inches apart. Slide the included plastic retaining washers over the bolts and press them down firmly against the flange. This will hold the bolts upright and in place while you install the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TAEwudpeQFo</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8701-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PHmK2fa0MEM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Pipe and Gasket — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Insert a rubber donut gasket into the now-clean hub of the cast iron fitting. Place the new PVC pipe into the gasket. To fully seat the pipe, place a block of wood on top of the pipe to protect it and strike the wood block firmly with a hammer until the pipe is pushed securely into the gasket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PHmK2fa0MEM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8701-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z0e4bM3ptgM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Pipe Assembly into Hub — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>The final step is to install the newly assembled PVC pipe and donut. The lubricated donut is aligned with the opening of the cleaned cast iron hub. The assembly is then pushed firmly into the hub. A twisting motion can help it seat properly. A screwdriver is used to carefully tuck the edges of the donut into the hub, ensuring it&apos;s fully and evenly seated all the way around to create a secure, leak-proof connection. A final thumbs-up signals the successful completion of the installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z0e4bM3ptgM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8701-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rNsLXhcSESU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect PVC to Cast Iron — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Connect the newly assembled PVC pipe to the existing cast iron drain. Slide the flexible rubber coupling over the cleaned end of the cast iron pipe. Insert the new PVC assembly into the other side of the coupling. Position the pipes correctly, ensuring they are fully seated. Using a flexible shaft nut driver, tighten the stainless steel band clamps securely over both pipes to create a watertight seal. The flexible driver is ideal for accessing the clamps in the tight space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rNsLXhcSESU</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8697-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E3ccc5Uir_0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cleaning the Hub — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>With the pipe stub removed, the final step is to thoroughly clean the inside of the hub. Use a flathead screwdriver to scrape and pry out any remaining pieces of hardened lead and the old, burnt oakum packing. A wire cleaning brush can also be very effective for this. Continue cleaning until the inside surface of the hub is smooth and free of debris, ready for the new plumbing tie-in.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E3ccc5Uir_0</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8697-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z0e4bM3ptgM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Leverage and Remove Steel Pipe — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>After removing about half of the lead, a ball-peen hammer is inserted head-first into the steel pipe to be used as a lever. By twisting and pulling on the hammer handle, the remaining seal is broken, and the pipe begins to turn. Another hammer is briefly used to tap the first hammer, likely to seat it more firmly. With sustained twisting force, the steel pipe is finally freed and pulled out of the cast iron hub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z0e4bM3ptgM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8697-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FQVyt-DLPbY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Cast Iron Hub — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>With the old pipe and seals removed, use a wire brush to thoroughly clean the inside of the cast iron hub. Vigorously brush the interior surfaces to remove any remaining lead fragments, old oakum, rust, and other debris. A clean, smooth surface is essential for the new rubber hub adapter to create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FQVyt-DLPbY</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8692-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7h-AWtQH_Rg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Begin by shutting off the water supply and flushing the toilet to drain the tank. Disconnect the water supply line from the fill valve. Unscrew the nuts from the tank-to-bowl bolts located underneath the tank rim. Once the bolts are free, carefully lift the tank straight up and off the toilet bowl. Carry the tank to a suitable work area, like outside or to a workbench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7h-AWtQH_Rg</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8692-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8G-hBeTnVo8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Place a small bucket or towel under the water supply line connection to catch any drips. Use a wrench to loosen and disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts under the rim of the toilet bowl. Use a wrench or socket to unscrew the nuts from these bolts. Once the nuts and washers are removed, carefully lift the toilet tank straight up and off the bowl. Place it on a protected surface like a towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8G-hBeTnVo8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8692-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9oPX28EGr5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>First, turn off the water supply to the toilet and flush it to empty the tank. Use a sponge or towel to remove any remaining water. Disconnect the water supply line from the fill valve. Locate the two bolts underneath the tank that secure it to the bowl. Use a deep socket wrench (a 1/2 inch was used here) to unscrew the nuts from these bolts. Carefully lift the tank off the bowl and move it to a work area like a garage or workbench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9oPX28EGr5w</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8699-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hzH5U7exNFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Wax Ring and Reinstall Toilet — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Once the flange is at the correct height, install a new wax ring. Place the wax ring directly on top of the new flange, centered over the drain opening. Carefully lift the toilet, align the holes in its base with the new closet bolts sticking up from the flange, and lower it straight down. Press down firmly to compress the wax ring and create a seal. Place the washers and nuts on the closet bolts and tighten them down evenly, alternating from side to side. Be careful not to overtighten, as this can crack the porcelain base of the toilet. Reconnect the water supply, turn the water on, and check for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hzH5U7exNFk</video:player_loc>
      <video:duration>87</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8699-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HWHlB-xJXMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Toilet — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>After the flange extender is securely screwed down, the final steps are to prepare for the toilet installation. Insert new closet bolts into the slots on the yellow extender. Place a new wax ring onto the extender. Finally, carefully lower the toilet onto the flange, aligning the holes in its base with the closet bolts, and press down firmly to set the toilet and create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HWHlB-xJXMY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8699-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nVok2dWGJSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Secure the Toilet — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Carefully lift the toilet and align the holes in its base with the new flange bolts. Lower the toilet straight down onto the wax ring. Press down firmly on the toilet bowl with your body weight to compress the wax ring and create a tight seal. Reattach the water supply line. Install the washers and nuts onto the flange bolts and tighten them, alternating sides to ensure even pressure. Use a hacksaw to cut the excess length off the bolts, then place the decorative plastic caps over them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nVok2dWGJSI</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8693-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iA5mj2uSfOg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Water and Check for Leaks — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Reconnect the water supply line to the fill valve at the bottom of the tank and hand-tighten it securely. Turn the water supply valve back on by turning it counter-clockwise. As the tank fills, carefully watch the new bolts and the seam between the tank and bowl from all angles to ensure there are no drips or leaks. Let the tank fill completely and check again.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iA5mj2uSfOg</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8693-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7wNsAkjpa14/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Water Supply and Test — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Reconnect the water supply line to the threaded shank of the new fill valve. If you have a bidet, reconnect the T-connector first. Hand-tighten all connections. Slowly turn the water shut-off valve counter-clockwise to restore water flow. Watch the tank fill and carefully check for any leaks around the base of the fill valve and the supply hose connection. Let the tank fill completely. If the water level is too high or low, use the adjustment screw on the fill valve to fine-tune it. Flush the toilet to ensure everything functions correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7wNsAkjpa14</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8693-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1ZvCBGrznxg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Tank and Check for Leaks — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Carefully lift the reassembled tank and place it back onto the toilet bowl, making sure the mounting bolts pass through the holes correctly. Secure the tank by reinstalling the washers and nuts, tightening them alternately. Reconnect the water supply line to the tank&apos;s shank. Turn the water supply valve back on slowly. As the unit fills with water and pressurizes, thoroughly inspect all connection points for any drips or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1ZvCBGrznxg</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8694-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xd871gxEre4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Drain Pipe — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>After all the large pieces of the old flange are removed, the plumber takes out the temporary rag from the drain. He then uses a chisel to meticulously scrape the inside surface of the cast iron pipe, removing any residual scale, old lead, and oakum. This step is critical to create a smooth, clean surface for the new flange&apos;s rubber gasket to seal against.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xd871gxEre4</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8694-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YOi5hdRBgZg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Out Old Joint Material — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>The video begins by showing a deteriorated cast iron toilet flange. Using tools like a putty knife and a screwdriver, carefully remove all the old, frayed oakum packing and any loose rust or debris from the space between the cast iron pipe and the toilet flange. The area must be thoroughly cleaned to ensure the new seal adheres properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YOi5hdRBgZg</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8694-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l-GXXNKc1BM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Flanges — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>After cleaning the area, the plumber removes the old flanges. He uses a specialized pipe reaming tool attached to a drill to cut out the inner PVC flange from inside the waste pipe. Next, he uses a pry bar and hammer to break and chisel away the old, rusted metal flange rings. This process fully exposes the rotted subfloor underneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l-GXXNKc1BM</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8695-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/obIjN5onG_I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Break the Bathtub — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Using a sledgehammer, strike the inside of the cast iron bathtub with firm, repeated blows. Cast iron is heavy and brittle, so it will crack and break under the force. Focus your strikes in one area to start a fracture, then work your way along the tub to break it into smaller, more manageable sections. Be careful not to hit surrounding walls or plumbing fixtures.</video:description>
      <video:player_loc>https://www.youtube.com/embed/obIjN5onG_I</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8695-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bYgVZDPufm8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tool Selection and Safety Preparation — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>The first step is to assess the situation and choose the correct tool for the job. While a reciprocating saw with a metal blade or an angle grinder can theoretically cut through a cast iron tub, these methods are slow, burn through blades or discs quickly, and are generally frustrating. The most efficient and recommended tool for this demolition project is a heavy sledgehammer, specifically one weighing 10 pounds or more. Before beginning any demolition, ensure you are wearing appropriate safety gear, including sturdy work gloves, safety glasses, and hearing protection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bYgVZDPufm8</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8695-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E3ccc5Uir_0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Begin by identifying the cast iron hubs that need to be removed. Gather all necessary tools and safety equipment. This includes an acetylene torch, a flathead screwdriver for picking out the lead, a hammer, channel-lock pliers, and safety glasses. Critically, if working on a vertical pipe stack, stuff a rag down into the pipe below the joint to catch any falling debris or molten lead, which could cause a serious blockage. It is also wise to have a fire extinguisher and a spray bottle of water on hand for safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E3ccc5Uir_0</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8696-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EnQqcmt4pAI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Pipe Surface — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>First, thoroughly clean the area around the crack on the cast iron pipe. Use a wire brush to scrub away loose rust and debris. You can also use steel wool for finer cleaning. Finish by sanding the area with sandpaper to make the surface as smooth as possible for the epoxy to adhere to.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EnQqcmt4pAI</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8696-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/edVjZwfNQyc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Pipe Removal — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Begin by preparing the work area and the existing cast iron pipe for removal. Lay down plastic sheeting on the floor directly below the pipe to catch any spills or debris. Use a wire brush to thoroughly clean the sections of the cast iron pipe where the new couplings will be attached. This removes rust and grime, ensuring a better seal. After cleaning, use a hand saw to score a groove around the pipe at your intended cut marks. This groove will guide the reciprocating saw blade and prevent it from slipping when you start the cut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/edVjZwfNQyc</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8696-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VNDe1RABPtg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Deburr the Pipe — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>After all the large pieces are removed, take a metal file and thoroughly clean the inside top edge of the drain pipe. Scrape away any remaining plastic burrs, glue residue, or rough spots. The goal is to create a perfectly smooth and clean surface, which is essential for achieving a watertight seal with the new flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VNDe1RABPtg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8700-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PXytjeQjNfs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit and Measure PVC — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Lay out the new PVC fittings to plan the replacement assembly. This will typically include a 4x4x2 inch tee fitting, various elbows, and straight pipe sections. Dry-fit the components together without glue to confirm the alignment and orientation. Use a tape measure to get precise measurements for the straight pipe pieces needed to bridge the gap between the existing upper and lower cast iron pipes. Remember to account for the insertion depth inside the fittings when measuring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PXytjeQjNfs</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8700-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cLJYdXqU1po/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare PVC Assembly — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>Before making the final connection, the presenter shows the fully assembled PVC P-trap. He notes that all the PVC components have been dry-fitted, marked, and then permanently joined using purple primer and PVC cement. The only piece not yet attached is the final vertical stack pipe that will connect to the floor drain fixture. This preparation ensures the PVC assembly is ready for immediate installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cLJYdXqU1po</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8700-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rzTXjXHWwV0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Assembly and Secure Couplings — How to Replace a Cast Iron Toilet Flange with PVC</video:title>
      <video:description>After allowing the PVC cement to set briefly, install the completed assembly into the gap. Slide the rubber couplings into position over the joints between the cast iron and PVC. Use a nut driver or socket wrench to firmly tighten the metal clamps on each coupling. Ensure the clamps are snug to create a watertight seal. Finally, install a metal support strap around the new PVC section and secure it to the floor joists above to support the pipe&apos;s weight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rzTXjXHWwV0</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8680-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Eg7PB_iYB7g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear the Drain — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>If the gurgling appears to be an issue isolated to a single sink, you can attempt to clear the drain yourself. Use a standard cup plunger to try and dislodge the clog through pressure. For a more direct approach, use a drain snake to physically break up or retrieve whatever is causing the blockage in the sink&apos;s drain pipe. Alleviating the clog should resolve the gurgling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Eg7PB_iYB7g</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8680-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y6UcZa0fRNQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plunge the drain — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>Place the plunger cup over the drain opening, ensuring a tight seal. Gently push and pull the plunger up and down, creating suction and pressure to dislodge the clog. Repeat if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y6UcZa0fRNQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8680-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jxvtjPwg8xU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plunge the Drain — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>To clear any final obstructions, use a plunger. First, allow a few inches of water to fill the tub, which is necessary for the plunger to create suction. Take a wet rag and firmly press it against the overflow drain plate to block it. This prevents air and water from escaping, maximizing the pressure on the clog. Place the plunger directly over the drain, ensuring a good seal, and perform several forceful plunges. This action will push the remaining blockage through the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jxvtjPwg8xU</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8677-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ixmXtm1c9pM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose the Issue — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>To determine if the smelly drain is caused by a siphoning issue, conduct a simple test. Flush the toilet that is located in the same bathroom as the shower. While the toilet is flushing, place your ear near the shower drain and listen carefully. If you hear a gurgling or slurping sound, it&apos;s a strong indication that the water in the shower trap is being pulled out, breaking the seal that blocks sewer gases.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ixmXtm1c9pM</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8677-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kbtFImSZCYA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Watch for Water Backups — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>Monitor your fixtures for any signs of water backing up. A clogged vent creates negative pressure in the drain lines. This imbalance can cause water from a flushing toilet or a running faucet to be forced back up into a nearby tub or shower drain instead of flowing away. The video shows dirty water backing up into a sink, illustrating this serious symptom of a blocked plumbing vent.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kbtFImSZCYA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8677-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/febQYfCSs_8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose the Clog — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>Listen for a gurgling or &apos;burping&apos; sound when you flush the toilet, as this is a primary indicator that air is being forced back up the pipe due to a blockage. To confirm, use a flashlight to look down into the toilet drain. Often, you can visually identify the clog, which is typically a buildup of toilet paper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/febQYfCSs_8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8679-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/43ZchEMW9-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Result and Clean Up — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>If the clog is dislodged, you will often hear a &apos;whoosh&apos; and feel the pressure release. Once the drain is clear, turn off the water and carefully remove the drain bladder. Replace the cleanout cap. If the clog does not clear, do not apply excessive pressure for a long time, as it may be a hard blockage (like tree roots) that requires a different tool, such as a mechanical auger. Pushing a soft clog into a harder clog can create a more difficult problem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/43ZchEMW9-g</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8679-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SohZvglWRsc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Consult a Professional Plumber — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>If you have observed any of the signs of a clogged vent but are unable to locate or clear the blockage yourself, or if you are uncomfortable performing the inspection, it is best to contact a licensed professional plumber. They have the proper tools and expertise to safely diagnose and resolve the issue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SohZvglWRsc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8679-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/INae6g0CZ0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install a Cleanout Fitting (Door Elbow) — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>At the point where the bathroom drainage pipe exits the exterior wall, install a T-fitting with a threaded cap, often called a &apos;door elbow&apos; or cleanout. This fitting is essential for maintenance. If a blockage occurs in the line, you can simply unscrew the cap and insert a drain snake or a high-pressure water hose to clear it. It is vital not to terminate the air vent at this low point.</video:description>
      <video:player_loc>https://www.youtube.com/embed/INae6g0CZ0c</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8681-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0L7yUrcsXeo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Vent Pipe with a Vacuum — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>Securely position an extension ladder to safely access the roof. Carefully climb onto the roof, carrying the assembled vacuum hose. Have an assistant on the ground to turn the shop vacuum on and off on your signal. Sit or kneel in a stable position next to the clogged vent pipe, insert the hose, and push it down until you feel the obstruction. Signal for the vacuum to be turned on and work the hose up and down to dislodge and suck out all the debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0L7yUrcsXeo</video:player_loc>
      <video:duration>246</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8681-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2DCJ_nnBCfQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect the Plumbing Vent Stack — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>Every plumbing system has a vent stack, which is a pipe that runs vertically through the walls and out the roof. Its purpose is to allow air into the pipes for proper drainage and to vent sewer gases safely outside. If this vent pipe has a crack or a loose joint within an attic or wall space, sewer gas can leak directly into your home instead of exiting through the roof. Finding such a leak can be difficult and may require a plumber.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2DCJ_nnBCfQ</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8681-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z5WNCFCgGNA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert the Plumbing Snake into the Vent — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>First, you must safely access the opening of your plumbing vent, which is typically located on the roof of your house. Once there, take your plumbing snake and begin to feed the flexible cable down into the vent pipe. The video demonstrates this using a 3-inch PVC pipe as an example. Continue pushing the cable downwards until you feel it stop, which indicates it has reached the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z5WNCFCgGNA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8678-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DQwFDrniPPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify and Clean Up — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>Once you feel the blockage clear and can feed the hose easily, have your helper check if the drains inside the house (e.g., the bathtub) are now clear. The video confirms the backed-up tub is draining. Signal your helper to turn off the water. Carefully pull the entire hose assembly out of the sewer line. Replace the cap on the septic access pipe to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DQwFDrniPPY</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8678-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x2T4iT_pkws/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Work the Auger to Clear the Clog — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>Once the auger is past the P-trap, fill the sink with a few inches of water. This helps flush debris and indicates when the clog is cleared. Squeeze the auger&apos;s trigger to engage the cable and turn the handle clockwise to advance and spin the auger into the blockage. Work the auger back and forth, alternating between clockwise and counter-clockwise turning, to break up the clog. Continue this process until the water in the sink drains freely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x2T4iT_pkws</video:player_loc>
      <video:duration>338</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8678-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wJ69ytYZ2JA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Drain Pipe Obstruction — How to Diagnose and Fix a Gurgling Toilet</video:title>
      <video:description>After cleaning the flange, inspect the drain pipe for any blockages. In the video, crumpled newspaper is discovered inside the pipe. Use pliers and a screwdriver to carefully pull out the obstruction. Be careful not to push the blockage further down the drain. Remove all visible debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wJ69ytYZ2JA</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8672-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hEDCKuuaTMU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Inlet &amp; Outlet Plumbing — How to Install a Whole-House Water Softener</video:title>
      <video:description>Measure, cut, and loosely assemble the plumbing pipes and fittings to connect the main water line to the softener&apos;s bypass valve. Ensure that the hard water supply pipe from the main line is connected to the inlet port of the bypass valve, which is clearly marked on the softener. If necessary, flexible connectors can be used to facilitate the connection between the existing plumbing and the bypass valve adapters.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hEDCKuuaTMU</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8672-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NLM5SaKFY3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Soldering the New Moen Valve — How to Install a Whole-House Water Softener</video:title>
      <video:description>After removing the old valve, clean the ends of the existing copper pipes using sandpaper or a deburring tool. Dry-fit the new Moen Posi-Temp valve with new copper pipes and fittings. Ensure the valve is oriented correctly with the &apos;UP&apos; marking facing upwards. Apply flux to all cleaned pipe ends and fittings. With fire precautions still in place, use a torch and lead-free solder to connect the new valve to the hot, cold, shower riser, and tub spout pipes. Once all joints are soldered, wipe them with a wet rag to remove excess flux.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NLM5SaKFY3g</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8672-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f1XEkVi3DLo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Prepare for Valve Installation — How to Install a Whole-House Water Softener</video:title>
      <video:description>Position the shower valve against the support beam and mark the pipe connection points. Use a tape measure to determine the exact lengths of copper pipe needed to connect the hot and cold supply lines to the valve inlets. Use a pipe cleaner brush to thoroughly clean the inside of the pipes and the outside of the fittings. Dry-fit all the cut pipe pieces and fittings together with the valve to verify that everything aligns correctly before soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f1XEkVi3DLo</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8673-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z5ItEW_Ubgw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Water Heater and Shut Off Supplies — How to Install a Whole-House Water Softener</video:title>
      <video:description>The first step is to prepare the water heater for the valve replacement. This involves turning the gas control valve to a lower setting like &apos;Pilot&apos; or &apos;Vacation&apos; to prevent the burner from igniting while you work. Then, locate the cold water inlet pipe and shut off the main water supply to the tank. It&apos;s helpful to leave the hot water outlet valve open, or open a hot water faucet elsewhere in the house, to allow air into the tank for easier draining.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z5ItEW_Ubgw</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8673-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3VQCjGuNrLE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Water Heater — How to Install a Whole-House Water Softener</video:title>
      <video:description>Prepare the water heater for the valve replacement. First, turn the gas control knob to the &apos;PILOT&apos; setting to prevent the main burner from igniting. Next, locate the cold water supply line entering the top of the water heater and turn the shut-off valve to the closed position. If this valve is not working, you will need to shut off the main water supply to the entire house.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3VQCjGuNrLE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8673-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vsWsbOjIrB0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Gas and Water Supply — How to Install a Whole-House Water Softener</video:title>
      <video:description>Before beginning any work, ensure your safety by shutting off the gas supply to the water heater. Locate the gas shut-off valve on the supply line and turn the handle perpendicular to the pipe to close it. Next, find the cold water intake valve, typically located on the pipe leading into the top of the heater, and turn its handle to shut off the water supply.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vsWsbOjIrB0</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8670-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HoiBQP18BY0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect the Brine Tank Overflow Drain — How to Install a Whole-House Water Softener</video:title>
      <video:description>Identify the overflow drain port on the back of the brine tank. This is a crucial safety feature. If the softener malfunctions and the internal float fails, this port allows excess water to drain out instead of flooding the area. You must run a hose from this port to a safe location, such as a floor drain or to the outside of the building. In the video, the installation is in a garage on a concrete slab, so the risk of damage is minimal, and the line is not run. However, for any installation in a finished area, this step is mandatory to prevent major water damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HoiBQP18BY0</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8670-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zikmilf_Tu0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Drain Line — How to Install a Whole-House Water Softener</video:title>
      <video:description>Inspect the drain line that runs from the water softener valve to the drain. Ensure that the line is not clogged, kinked, or frozen, as any of these conditions will restrict the flow of water and prevent the system from creating the suction needed to draw brine from the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zikmilf_Tu0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8670-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nKPfh6V46dI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Connection for Leaks — How to Install a Whole-House Water Softener</video:title>
      <video:description>Once the entire system is installed and the drain line is securely clamped, run the water softener through a regeneration cycle. This will force water through the drain line under pressure. Carefully observe all the connection points on the drain line adapter for any drips or leaks. If any are found, tighten the corresponding hose clamps further.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nKPfh6V46dI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8669-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jhAvUd_B7xI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill and Program the Unit — How to Install a Whole-House Water Softener</video:title>
      <video:description>Pour approximately 3-4 gallons of water into the bottom of the brine tank. Then, pour in the water softener salt pellets until the tank is about half to two-thirds full. Plug the power adapter into a GFCI-protected outlet. Program the control head according to the manual, typically setting the time and water hardness. Once programmed, run a manual backwash or regeneration cycle to prepare the resin bed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jhAvUd_B7xI</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8669-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tWCWI3JRoKI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fast-Forwarding Cycles — How to Install a Whole-House Water Softener</video:title>
      <video:description>If you need to quickly advance through the regeneration stages after starting an immediate cycle, wait for the current cycle&apos;s timer to begin counting down. Once it is counting down, press the &apos;REGEN&apos; button briefly. This action will stop the current cycle and immediately start the next one. You can repeat this process to skip through each stage of the regeneration (e.g., Backwash, Brine Draw, Rinse, Fill) until the softener returns to service mode.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tWCWI3JRoKI</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8669-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hSzNT6NKB3E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Brine Tank Fill — How to Install a Whole-House Water Softener</video:title>
      <video:description>Regeneration begins with the brine tank fill cycle. Before the main regeneration process, the system directs a calculated amount of water into the brine tank. This water is softened as it passes through the resin first, which is crucial for optimal performance. The water sits in the brine tank, dissolving the salt pellets to create a concentrated salt solution, known as brine, which will be used to recharge the resin beads later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hSzNT6NKB3E</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8671-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DNUkc5R5cXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Repair — How to Install a Whole-House Water Softener</video:title>
      <video:description>Once the new valve is securely installed, slowly turn the handle to allow water to flow through the pipe again. Carefully inspect the new connection point for any signs of dripping or leaking to ensure the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DNUkc5R5cXU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8671-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CEqs0w-NcF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — How to Install a Whole-House Water Softener</video:title>
      <video:description>Go back to the main water shut-off and turn it on very slowly to allow the pipes to fill gradually, preventing a water hammer. Listen for the sound of water running; it should stop once the pipes are full. Return to the new angle stop valve and meticulously inspect the connection point at the compression nut for any leaks. Use a dry paper towel or your finger to feel around the joint for moisture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CEqs0w-NcF8</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8671-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tmL1Bs1ZYxo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Bypass Valve — How to Install a Whole-House Water Softener</video:title>
      <video:description>Check that the water softener is not in bypass mode. Most softeners have a built-in bypass valve, but you should also inspect the plumbing around the unit for any external bypass valves. Follow the plumbing lines to ensure all valves are in the correct &apos;service&apos; position, allowing water to flow through the softener, and not in the &apos;bypass&apos; position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tmL1Bs1ZYxo</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8668-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LH_dNXDKIEA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect and Fill Brine Tank — How to Install a Whole-House Water Softener</video:title>
      <video:description>Connect the brine line hose from the softener control head to the brine well inside the brine tank. Plug the unit&apos;s AC adapter into a wall outlet. Prefill the brine tank with a few gallons of water, then pour in the water softener salt pellets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LH_dNXDKIEA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8668-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8WuJVu6pEC8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Softener — How to Install a Whole-House Water Softener</video:title>
      <video:description>Make the final connections from the piped lines to the water softener and brine tank in the garage, ensuring all connections are properly secured.   A discharge line should also be installed from the softener to the sanitary sewer or septic system via an air gap drain to prevent the potential backflow of contaminants from either system to the other.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8WuJVu6pEC8</video:player_loc>
      <video:duration>171</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8668-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ckYQdzVqxcQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the main water line — How to Install a Whole-House Water Softener</video:title>
      <video:description>Cut the main cold water line that feeds your water heater in a location where it is easiest to install the water softener.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ckYQdzVqxcQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8674-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xpx4zu0aZLw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Bypass Valves — How to Install a Whole-House Water Softener</video:title>
      <video:description>First, you must locate the bypass valve assembly, which is a set of three valves that control the flow of water to and from the softener. These are usually installed on the pipes near the softener. The video shows several examples, noting that they can be oriented in various ways (vertically, horizontally) and may have different handle styles. If the valves are not immediately visible, find the two largest hoses coming from the softener (these could be white plastic or braided stainless steel) and trace them back to where they connect to your home&apos;s main plumbing. This will lead you to the bypass valve assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xpx4zu0aZLw</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8674-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xpx4zu0aZLw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Engage Bypass Mode — How to Install a Whole-House Water Softener</video:title>
      <video:description>To bypass the softener, you will operate the three valves. First, turn the handle on the inlet valve so it is perpendicular to the pipe, closing it. This stops water from entering the softener. Next, do the same for the outlet valve, turning its handle to be perpendicular to the pipe. This stops water from leaving the softener. Finally, turn the handle on the middle (bypass) valve so it is parallel with the pipe, opening it. This allows the hard water from the inlet side to flow directly to the outlet side, bypassing the softener completely. Your home will now be supplied with normal hard water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xpx4zu0aZLw</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8674-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Yr8WtFGMqjc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Bypass Valves — How to Install a Whole-House Water Softener</video:title>
      <video:description>Locate the bypass valve assembly on the back of the water softener&apos;s control head. It consists of two red-handled valves. The valves have arrows embossed on them to indicate the direction of flow for service (outward) and bypass (inward).</video:description>
      <video:player_loc>https://www.youtube.com/embed/Yr8WtFGMqjc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8675-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hEDCKuuaTMU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Inlet &amp; Outlet Plumbing — How to Install a Whole-House Water Softener</video:title>
      <video:description>Measure, cut, and loosely assemble the plumbing pipes and fittings to connect the main water line to the softener&apos;s bypass valve. Ensure that the hard water supply pipe from the main line is connected to the inlet port of the bypass valve, which is clearly marked on the softener. If necessary, flexible connectors can be used to facilitate the connection between the existing plumbing and the bypass valve adapters.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hEDCKuuaTMU</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8675-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/288TwNMOpwc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Remove Old Pipe — How to Install a Whole-House Water Softener</video:title>
      <video:description>Begin by shutting off the main water supply. Inside, locate the copper pipe leading to the old hose bib. Use a pipe cutter to make a clean cut through the pipe. Be prepared for some residual water to drain out. Once cut, remove the old section of pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/288TwNMOpwc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8675-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x6USPY3CFOA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Valve — How to Install a Whole-House Water Softener</video:title>
      <video:description>First, ensure the main water supply to the house is shut off. Place a towel underneath the existing toilet valve to catch any residual water. Using a hacksaw or a pipe cutter, carefully cut the copper pipe to remove the old compression valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x6USPY3CFOA</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8676-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hSzNT6NKB3E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Brine Tank Fill — How to Install a Whole-House Water Softener</video:title>
      <video:description>Regeneration begins with the brine tank fill cycle. Before the main regeneration process, the system directs a calculated amount of water into the brine tank. This water is softened as it passes through the resin first, which is crucial for optimal performance. The water sits in the brine tank, dissolving the salt pellets to create a concentrated salt solution, known as brine, which will be used to recharge the resin beads later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hSzNT6NKB3E</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8676-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X38OY7GUFMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Control Valve and Get Screwdriver — How to Install a Whole-House Water Softener</video:title>
      <video:description>Locate the control valve on top of the water softener, which is the black assembly with a clear cap in the center. You will need a Phillips screwdriver for this process. The cap area is where you will manually start the regeneration cycle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X38OY7GUFMM</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8676-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OFnTzTyNs_k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Drain Access — How to Install a Whole-House Water Softener</video:title>
      <video:description>Locate the access to the drain. Salt-based water softeners perform a regeneration cycle every 10-14 days to flush out collected minerals like calcium. This process requires a drain to dispose of the brine and waste water. A properly pre-plumbed setup will have a drain pipe readily available near the plumbing loop, often within the same recessed wall box.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OFnTzTyNs_k</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8666-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1eCW9rGj90w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up Excess Putty — How to Remove Old, Hardened Plumber&apos;s Putty</video:title>
      <video:description>Once the fixture is secured, return to the top of the sink. Use your fingers or a plastic putty knife to carefully remove the excess plumber&apos;s putty that has squeezed out around the base of the fixture. Wipe the area with a clean cloth to remove any residue. For additional sealing, the creator notes that a small amount of clear silicone was applied to the back edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1eCW9rGj90w</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8666-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/49a27LKG4kI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Surfaces — How to Remove Old, Hardened Plumber&apos;s Putty</video:title>
      <video:description>Before applying the plumber&apos;s putty, it is essential to prepare the contact surfaces. Using a clean cloth, thoroughly wipe down both the flange of the drain fitting and the area around the sink&apos;s drain hole. Ensure both surfaces are completely clean, dry, and free of any old putty, dirt, or debris to guarantee a proper seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/49a27LKG4kI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8666-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OhjWW34kxEs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Sink Opening — How to Remove Old, Hardened Plumber&apos;s Putty</video:title>
      <video:description>Using a plastic putty knife, carefully scrape away all the old, hardened plumber&apos;s putty and any other gunk from the sink&apos;s drain opening. Clean both the top surface inside the sink and the underside of the sink around the opening. After scraping, wipe the area thoroughly with a paper towel to ensure it is clean and dry, providing a smooth surface for the new strainer&apos;s seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OhjWW34kxEs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8665-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A4AT7zDotFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Repair Area — How to Remove Old, Hardened Plumber&apos;s Putty</video:title>
      <video:description>Using a 6-inch putty knife, scrape away any loose or excess material around the edges of the patch to create a clean surface for taping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A4AT7zDotFk</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8665-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eWNzERTuyCE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hole Preparation — How to Remove Old, Hardened Plumber&apos;s Putty</video:title>
      <video:description>The presenter first uses a putty knife to scrape away any loose or raised material around the hole to create a relatively flat surface for the patch.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eWNzERTuyCE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8665-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SkowpaB_IAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prep Work — How to Remove Old, Hardened Plumber&apos;s Putty</video:title>
      <video:description>Using a putty knife, carefully remove all loose and peeling pieces of drywall paper from the damaged areas. This process requires patience and attention to detail.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SkowpaB_IAc</video:player_loc>
      <video:duration>145</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8658-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bjFKFZxRi2I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Pipes — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>Using a tape measure, determine the correct length the copper pipes need to be for the new faucet fittings. Mark the cutting line on each pipe with a pencil. Attach a compact tubing cutter to the pipe at the mark, tighten it, and rotate it around the pipe, tightening it slightly with each rotation until the pipe is cleanly cut. Repeat for the second pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bjFKFZxRi2I</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8658-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ut30zuuS_mM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Cut New Pipe — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>Take the measurement obtained in the previous step (33 cm in the video) and use a marker pen to mark this length on the new plastic pipe. Then, using a universal saw or a hacksaw, carefully cut the plastic pipe at the mark. Ensure the cut is as straight as possible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ut30zuuS_mM</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8658-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J0x3MUJ56Bw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut the Waste Arm — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>Hold the old waste arm pipe in position against the newly installed tailpiece and the other sink&apos;s strainer to determine the correct length. Use a marker to mark where the pipe needs to be cut. You can also use a tape measure for a more precise measurement from the face of the tailpiece to the center of the strainer. Use a reciprocating saw or hacksaw to cut the pipe at the mark. After cutting, use a utility knife or deburring tool to clean the inside and outside edges of the cut for a smooth finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J0x3MUJ56Bw</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8662-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/raEldIPChdA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Pipe Exterior — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>Before soldering, it&apos;s essential to prepare the surface of the copper pipe. Secure the pipe in a bench vise. Take a piece of wire wool or emery cloth and vigorously rub the end of the copper pipe where the fitting will be placed. Continue cleaning until the copper is bright and shiny, removing all oxidation and dirt. This ensures a strong bond for the solder.</video:description>
      <video:player_loc>https://www.youtube.com/embed/raEldIPChdA</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8662-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k8J30-2WY7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Pipe Ends — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>Thoroughly clean the outside of the copper pipe ends using sandpaper. The video shows the use of 220 grit sandpaper. Sand the surfaces until they are bright, shiny, and completely free of any old solder, flux residue, or oxidation. A clean surface is essential for a proper solder joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k8J30-2WY7E</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8662-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cXrGnXwWyYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Surfaces for Soldering — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>Using sandpaper or emery cloth, thoroughly clean the outside of the newly cut copper pipe until it is bright and shiny. Then, use a wire fitting brush to clean the inside of the threaded adapter, also ensuring it is shiny. This removes any oxidation and debris, which is essential for a proper solder joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cXrGnXwWyYs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8659-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sU1fgDqlwyM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Copper Pipes — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>After removing the old fittings, thoroughly clean the ends of the copper pipes. Use emery cloth or a pipe cleaning tool to sand the inside and outside of each pipe opening until the copper is bright and shiny. This removes any oxidation and old solder residue, which is essential for a good new connection. Wipe away any dust with a clean rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sU1fgDqlwyM</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8659-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JyVbjDsric4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>Clean the copper pipe and fitting from any surface corrosion or dirt. Use sandpaper or emery cloth for the pipe and wire brushes for the fitting.  Ensure the pipe is sanded until there are no surface spottings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JyVbjDsric4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8659-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QJFY47UdV00/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Pipe — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>Clean the cut ends of the copper pipe using a pipe cleaner and a brush to remove any debris or oxidation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QJFY47UdV00</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8660-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zirp8vqApQc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Burrs — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>After cutting, carefully remove all burrs from the inside and outside of the pipe end. Burrs are small shavings or raised edges of plastic left from the cutting process. You can use a dedicated deburring tool, a utility knife, or a file to create a smooth, clean edge. This step prevents the burrs from scraping away the cement during assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zirp8vqApQc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8660-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iGQdsgp0Zr0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deburr and Clean the Pipe — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>After cutting the pipe, it is crucial to deburr the end. Use a deburring tool or a piece of emery cloth to smooth out the inside and outside edges of the newly cut pipe. This removes any sharp metal shavings or burrs created by the cutting tool. A smooth surface is essential to prevent the internal O-ring of the SharkBite fitting from being cut or damaged upon installation, which would result in a leak. Once deburred, wipe the end of the pipe with a clean cloth to remove any dust or debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iGQdsgp0Zr0</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8660-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9ZdGUtAATHc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deburr and Chamfer Pipe — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>After cutting the PVC pipe, remove the plastic burrs from the inside and outside edges. Use a deburring tool to scrape the inside edge of the pipe until smooth. Then, use a chamfering tool, like the Reed DEB4, on the outside edge. Place the tool over the end of the pipe and rotate it to create a beveled edge. This chamfer helps ensure the PVC cement isn&apos;t pushed out when you join the pipe and fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9ZdGUtAATHc</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8661-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QiU3WRIyeOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Pipe to Length — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>The process begins by cutting the metal pipe to the required length. A manual pipe cutter is placed on the pipe. The handle is turned to tighten the cutting wheel against the pipe, and the entire tool is rotated around the pipe&apos;s circumference. This process of tightening and rotating is repeated until the pipe is cleanly severed. After the cut, the manual cutter is removed from the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QiU3WRIyeOE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8661-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gwgjkv8jCjc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Pipe with a Snap Cutter — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>Position the snap cutter around the pipe, aligning the cutting wheels with the marked line. Ensure the maximum number of cutting wheels are in contact with the pipe. First, apply moderate pressure to the handles to score the pipe, making a visible indent. Release the pressure, rotate the pipe slightly within the cutter&apos;s chain, and then apply quick, firm pressure to the handles to snap the pipe cleanly along the score line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gwgjkv8jCjc</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8661-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3S8VE5xzPJ4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Pipe to Length (Demonstration) — How to Cut and Prepare Copper Pipe for a Perfect Joint</video:title>
      <video:description>To cut a pipe, secure it in the chuck. Lower the pipe cutter attachment so the wheel is on the mark. Turn on the machine. Slowly and steadily tighten the handle of the cutter, about a half-turn for each rotation of the pipe. Continue this process until the cutter wheel cuts completely through the pipe, and the end piece pops off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3S8VE5xzPJ4</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8649-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wJ69ytYZ2JA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall the Toilet — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Carefully lift the toilet and align the holes in its base with the flange bolts. Lower the toilet straight down onto the wax ring. Press down firmly and evenly on the toilet bowl to compress the wax and create a solid seal. Place the washers and nuts on the bolts and tighten them alternately, being careful not to overtighten and crack the porcelain base. Reconnect the water supply line, turn the water on, and check for leaks around the base and at the connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wJ69ytYZ2JA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8649-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GwKT_5mQXWs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Secure Toilet — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Carefully lift the new toilet and align the holes at its base with the T-bolts sticking up from the floor flange. Gently lower the toilet into place, ensuring it is straight. Press down firmly to compress the seal. From behind the toilet, place the washers and nuts onto the T-bolts and hand-tighten them to secure the toilet to the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GwKT_5mQXWs</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8649-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hzH5U7exNFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Wax Ring and Reinstall Toilet — How to Fix a Leaking Toilet Base by Replacing the Wax Ri</video:title>
      <video:description>Once the flange is at the correct height, install a new wax ring. Place the wax ring directly on top of the new flange, centered over the drain opening. Carefully lift the toilet, align the holes in its base with the new closet bolts sticking up from the flange, and lower it straight down. Press down firmly to compress the wax ring and create a seal. Place the washers and nuts on the closet bolts and tighten them down evenly, alternating from side to side. Be careful not to overtighten, as this can crack the porcelain base of the toilet. Reconnect the water supply, turn the water on, and check for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hzH5U7exNFk</video:player_loc>
      <video:duration>87</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8655-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UK_YtqTNgqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect the Supply Line — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Place a bucket and towel under the supply line connection. Using two adjustable wrenches, hold the faucet&apos;s connection nut steady with one wrench (the backup wrench) while turning the supply line nut counter-clockwise with the other wrench to loosen and disconnect it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UK_YtqTNgqQ</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8655-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dG8YJjNu78Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove the Tank — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Place a towel on the floor to catch any drips. Use an adjustable wrench to disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts underneath the bowl and use a wrench to loosen and remove the nuts. Once the bolts are loose, carefully lift the tank straight up and off the toilet bowl. Place the tank on a protected surface, such as a towel laid over the toilet seat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dG8YJjNu78Q</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8655-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2QzV3rC9Wlk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect water supply line — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Place a towel under the connection to catch dripping water. Use a wrench to disconnect the hose from the water supply valves under the sink. Turn counter clockwise to loosen. Do this for both supply lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2QzV3rC9Wlk</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8652-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LiNJrnbJxns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Seal and Clean Flange — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>After removing the toilet, you will see the floor flange and the old seal. The video shows a rubber seal, but typically you will find a wax ring. Scrape off all remnants of the old wax ring from the flange and the bottom of the toilet using a putty knife. Clean the area thoroughly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LiNJrnbJxns</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8652-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pGoayxuQ9hg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove wax ring — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Remove the old wax ring from the toilet flange using a putty knife or scraper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pGoayxuQ9hg</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8652-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wJ69ytYZ2JA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Old Flange and Wax — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Using a putty knife or scraper, carefully remove the old wax ring from the toilet flange. Scrape away all residual wax and any other gunk from the flange and the surrounding floor area. Dispose of the old wax in a trash bag. The goal is to have a clean, smooth surface for the new flange and seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wJ69ytYZ2JA</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8654-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MsoV9WSuGgI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Toilet Bolts — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>The final step is to ensure the toilet is anchored securely. Using an appropriate wrench or socket, tighten the nuts on the closet bolts you located earlier. As you tighten, alternate between the left and right bolts to apply pressure evenly. The goal is to make them snug enough to hold the toilet firmly in place and compress the shims slightly. Be very careful not to overtighten, as applying too much force can easily crack the porcelain of the toilet base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MsoV9WSuGgI</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8654-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5df9dwpET98/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the New Toilet Bowl — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Carefully lift the new toilet bowl and lower it onto the new seal and closet bolts. Align the holes in the toilet base with the bolts. Press down firmly and evenly on the bowl to compress the seal and seat the toilet securely on the floor. Install the washers and nuts onto the closet bolts and hand-tighten them. Then, use a wrench to snug the nuts, alternating between sides to apply even pressure. Be careful not to overtighten, as this can crack the porcelain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5df9dwpET98</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8654-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Px8BtZRrv60/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Closet Bolts — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Pry off the plastic caps that cover the bolts on each side of the toilet base. Use an adjustable wrench to gently tighten the nut on each bolt. Alternate between the left and right sides to ensure even pressure. Be very careful not to over-tighten, as you can crack the toilet&apos;s porcelain base. If the nut is loose, a few turns should be enough. Also, inspect the washer underneath the nut to ensure it is not bent or damaged.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Px8BtZRrv60</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8648-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/haxVYgoBCng/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Toilet — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>First, remove your existing toilet seat. After removal, thoroughly clean the toilet rim. Next, locate the water supply shut-off valve on the wall and turn it off to stop water flow to the toilet. Flush the toilet and hold the handle down to completely drain the water from the tank. Place a towel on the floor and unscrew the flexible water supply line from the fill valve located underneath the toilet tank. The towel will catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/haxVYgoBCng</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8648-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TVKweTUucrM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Tank and Disconnect Water Supply — How to Fix a Leaking Toilet Base by Replacing the Wax R</video:title>
      <video:description>First, turn off the water supply to the toilet by turning the shut-off valve on the wall. Next, flush the toilet and hold the flush lever down to drain as much water from the tank as possible. Place a sponge or towel below the tank connection to catch any residual water. Finally, unscrew and disconnect the water supply line from the fill valve at the bottom of the toilet tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TVKweTUucrM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8648-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FIIVhSTKS3Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>To begin working inside the tank, you must first shut off the water supply. Locate the shut-off valve on the wall, typically behind the toilet, and turn the handle clockwise until it stops. After the water is off, remove the toilet tank lid and place it somewhere safe. Flush the toilet to drain the water out of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FIIVhSTKS3Y</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8650-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MwKZ7Z2SOl0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect the water supply line — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Reconnect the water supply line to the toilet tank. Hand-tighten the nut securely, then turn the water supply back on, and check that the toilet tank is filling up normally.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MwKZ7Z2SOl0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8650-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fFuokGzxtTA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect and Test — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Reconnect the water supply line to the bottom of the new fill valve, tightening it securely by hand. Slowly turn the water shut-off valve counter-clockwise to turn the water back on. Carefully inspect the connections at the bottom of the tank for any drips or leaks. If no leaks are present, open the valve fully. Allow the tank to fill completely. The new valve should fill the tank much faster, in this case around 33 seconds compared to 30 minutes. Flush the toilet to confirm everything is working correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fFuokGzxtTA</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8650-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PUVssZsSbPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Water and Check for Leaks — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Reconnect the water supply line to the bottom of the fill valve, hand-tightening the coupling nut. Turn the water supply valve counter-clockwise to turn the water back on. Allow the tank to fill and check for any leaks around the base of the tank and the bolt connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PUVssZsSbPw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8651-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uB-uCNU2Ln4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Toilet Tank — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Flush the toilet to empty the majority of the water from the tank. To drain the remaining water, hold the flapper valve open. Use an absorbent sponge to soak up the last bit of water at the bottom of the tank, wringing it out into your bucket until the tank is empty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uB-uCNU2Ln4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8651-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gsDMBcuSNXE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Toilet Tank — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Empty the water from the toilet tank by flushing it. To remove the remaining water, use a large sponge to soak it up and wring it into a bucket. For water conservation, the video demonstrates siphoning the tank water into a bucket using a hose before using the sponge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gsDMBcuSNXE</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8651-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J2XFB1CmU4A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Toilet Tank — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Flush the toilet to empty most of the water from the tank. Place a flexible bucket underneath the tank connection to catch any remaining water. Use a wet/dry shop vacuum to suck out the last bit of water from the bottom of the tank for a clean and dry working area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J2XFB1CmU4A</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8653-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LCcbdmT8De0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim Excess Shim Material — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>With the toilet stable and the bolts tightened, use a sharp razor knife to carefully trim the excess portion of the rubber shims. Cut them so they are flush with the base of the toilet for a clean appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LCcbdmT8De0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8653-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tNAS37r9ASE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Secure the Toilet — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Carefully align the holes on the base of the toilet with the closet bolts and lower the toilet straight down onto the wax ring. Press down firmly on the toilet bowl to compress the wax ring. Place the washers and nuts onto the bolts. Hand-tighten the nuts, then use pliers to snug them down, alternating between sides to ensure even pressure. Do not overtighten, as this can crack the porcelain. Finally, place the decorative caps over the bolts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tNAS37r9ASE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8653-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1kVgg6JXyms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Closet Bolts — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>First, loosen and remove the nut and metal washer from each closet bolt. Place the plastic base from a new bolt cap set over the bolt to protect the porcelain. Replace the metal washer and the nut. Use a wrench to tighten the nuts on both sides, alternating between them to apply even pressure. Tighten them until they are snug, but be careful not to overtighten and crack the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1kVgg6JXyms</video:player_loc>
      <video:duration>86</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8656-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vw-Z7el7JvY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Seat — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Lift the plastic caps that cover the toilet seat bolts at the back of the toilet bowl. Use a screwdriver to turn the screws counter-clockwise to loosen them. Once the screws are removed, lift the entire toilet seat and lid assembly off the toilet bowl and set it aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vw-Z7el7JvY</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8656-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S4MfuSCySH0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Seat — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>To remove the toilet seat, first flip up the plastic caps that cover the mounting bolts. Use a wide flathead screwdriver to turn the bolts counter-clockwise. You will need to reach underneath the toilet rim with your other hand to hold the corresponding nuts, preventing them from spinning as you loosen the bolts. Once both bolts are fully unscrewed, you can lift the entire toilet seat off the bowl. Set the seat and its hardware aside in a safe place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S4MfuSCySH0</video:player_loc>
      <video:duration>87</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8656-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F20NuU37qeY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Tank Bolts — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>To remove the old bolts, you&apos;ll need two tools. Use a flathead screwdriver to hold the bolt steady from inside the tank. From underneath the toilet bowl, use a 13mm deep socket with a ratchet to loosen and remove the nut. An extension on the ratchet can make it easier to reach. Once the nut is off, remove the metal washer. Repeat this process for the bolt on the other side. After both nuts are removed, carefully lift the toilet tank off the bowl and set it aside on a towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F20NuU37qeY</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8657-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tNAS37r9ASE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Bolts and Wax Ring — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Insert the new closet bolts into the slots on the newly installed flange. These SetFast bolts are self-adjusting. Next, place a new wax ring gasket directly onto the flange, pressing down gently to ensure it adheres.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tNAS37r9ASE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8657-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PnXezZt6OMk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Closet Bolts and Wax Ring — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>With the new flange installed and secured, the plumber prepares to mount the toilet. He inserts two brass closet bolts into the keyway slots on opposite sides of the flange. He uses plastic retaining washers to hold them upright and centered. Next, he takes a new wax ring, which has a plastic horn to help guide waste, and places it firmly over the drain opening on top of the flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PnXezZt6OMk</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8657-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E6joIwI3KVo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Toilet Reinstallation — How to Fix a Leaking Toilet Base by Replacing the Wax Ring</video:title>
      <video:description>Insert the new closet bolts into the slots on the newly installed flange. Place two wax rings directly onto the flange, one on top of the other, to ensure a thick, reliable seal. Carefully align the holes in the base of the toilet with the closet bolts and lower the toilet straight down onto the flange. Press down firmly to compress the wax rings. Place the washers and nuts onto the bolts and tighten them down, alternating between sides to ensure even pressure. Use an impact driver or wrench, but finish by hand to avoid over-tightening. Snap the decorative bolt caps into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E6joIwI3KVo</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8642-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/je6_S2wjJik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Shutting Off Water — How to Remove an Old Dishwasher</video:title>
      <video:description>The first and most critical step is to prepare the area and shut off the water. Locate the hot and cold water shutoff valves, typically found beneath the sink coming out of the wall. Turn both valves clockwise until they are fully closed. To ensure the water is completely off, open both the hot and cold taps on the faucet. No water should flow out. Place a small bucket or container directly under the P-trap to catch any water that will drain out in the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/je6_S2wjJik</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8642-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WI_s2cPfzlg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Utilities and Access Pump — How to Remove an Old Dishwasher</video:title>
      <video:description>With the dishwasher pulled out, disconnect the three main utility lines. First, use a wrench to unscrew the braided water intake line. Second, release the spring clamp on the main drain hose and pull it off the pump; have a towel ready for water spillage. Third, locate the electrical junction box. Unscrew its cover, then unscrew the wire nuts to disconnect the power, neutral, and ground wires. Once all lines are disconnected, you can fully remove the dishwasher and lay it on its back to access the pump.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WI_s2cPfzlg</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8642-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_jeKZo_okwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power and Plumbing — How to Remove an Old Dishwasher</video:title>
      <video:description>For safety, completely disconnect the garbage disposal from its power source. Unplug the power cord from the outlet under the sink. As an extra precaution, go to your home&apos;s electrical panel and turn off the circuit breaker that controls the garbage disposal. Before disconnecting any pipes, place a bucket or container underneath to catch any water that will drain out. Use a screwdriver or pliers to loosen the hose clamp on the dishwasher drain line and pull the hose off the disposal inlet. Then, unscrew the fittings that connect the main drain elbow to the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_jeKZo_okwE</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8644-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fnYnHO3Ktp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Dishwasher to Cabinets — How to Remove an Old Dishwasher</video:title>
      <video:description>To prevent the dishwasher from tipping forward when the door is opened, secure it to the adjacent cabinets. Open the dishwasher door to access the mounting holes along the sides of the tub frame. Drive screws through these holes into the face frames of the cabinets on either side. Install the provided plastic or rubber caps to cover the screw heads for a finished look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fnYnHO3Ktp0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8644-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t7dEkdHjR84/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install High Drain Loop — How to Remove an Old Dishwasher</video:title>
      <video:description>To install a high drain loop, obtain a drain hose bracket and a screw. Place the dishwasher&apos;s drain hose into the bracket. Position the bracket against the underside of the countertop, ensuring the top of the hose loop is at least 32 inches from the floor. Use a screwdriver to fasten the bracket to the countertop with the screw. Be careful not to screw through the hose itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t7dEkdHjR84</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8644-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fnYnHO3Ktp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Slide in New Dishwasher — How to Remove an Old Dishwasher</video:title>
      <video:description>Carefully stand the dishwasher upright. Feed the drain hose, water supply line, and electrical cable through the hole in the side of the cabinet that leads under the sink. Gently slide the dishwasher into the cabinet space, being careful not to kink or pinch any of the lines. Adjust the leveling legs on the front of the dishwasher as needed to ensure it is level and fits snugly under the countertop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fnYnHO3Ktp0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8643-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ybkq-_ySjhk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Remove the Dishwasher — How to Remove an Old Dishwasher</video:title>
      <video:description>Before starting the installation, first unplug the dishwasher and the garbage disposal from the electrical outlet under the sink. Turn off the water supply valve for the dishwasher. To remove the dishwasher, open the door and locate the screws securing it to the underside of the countertop. In this case, since it&apos;s a granite countertop, the dishwasher is secured to a metal support beam with screws. Unscrew these screws. Once the screws are removed, the dishwasher can be carefully pulled out from under the counter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ybkq-_ySjhk</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8643-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yCAnDosCZ1o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Mounting Screws — How to Remove an Old Dishwasher</video:title>
      <video:description>Open the dishwasher door completely. Look along the top edge of the dishwasher tub. You will see two metal mounting brackets, one on each side, that are screwed into the underside of your kitchen countertop. Use a screwdriver to remove both of these screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yCAnDosCZ1o</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8643-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pzVxAStmJpk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Washer Cabinet — How to Remove an Old Dishwasher</video:title>
      <video:description>With the clips removed and wiring disconnected, you can now remove the main cabinet. Tilt the cabinet slightly forward, then lift it straight up to clear the water inlet valve at the back. To get a better grip, you can open the washer lid and hold onto the edge of the tub opening. Carefully lift the entire cabinet shell up and away from the washer&apos;s base frame and set it aside in a location where it won&apos;t be damaged.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pzVxAStmJpk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8646-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wo-WKiC2yrQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power Cord from Old Disposal — How to Remove an Old Dishwasher</video:title>
      <video:description>With the old disposal removed, place it on a stable surface. Locate the electrical access plate on the bottom of the unit. Use a screwdriver to remove the screw holding the plate in place. Inside, you will find the wire connections. Carefully untwist the wire nuts connecting the power cord&apos;s black (hot), white (neutral), and green (ground) wires to the disposal&apos;s wires. Loosen the ground screw to free the green wire. Finally, remove the strain relief holding the cord to the housing and pull the cord free.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wo-WKiC2yrQ</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8646-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hkLOk74lRe0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire New Garbage Disposal — How to Remove an Old Dishwasher</video:title>
      <video:description>First, install the strain relief fitting from the old power cable onto the new disposal. Feed the power cable through the fitting and tighten it. Connect the bare copper ground wire to the green ground screw. Use wire nuts to connect the white neutral wire from the disposal to the white wire from the power cable, and do the same for the black hot wires. Tuck the wires inside and reinstall the electrical cover plate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hkLOk74lRe0</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8646-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hkLOk74lRe0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Electrical Wiring — How to Remove an Old Dishwasher</video:title>
      <video:description>Lay the old disposal on its side. Use a screwdriver to remove the electrical cover plate on the bottom of the unit. Unscrew the green ground screw. Untwist the wire nuts connecting the hot (black) and neutral (white) wires. Finally, loosen the clamp holding the armored power cable and pull the cable free from the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hkLOk74lRe0</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8647-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MDFNrPKU_tQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing — How to Remove an Old Dishwasher</video:title>
      <video:description>Disconnect the drain pipe and dishwasher hose from the garbage disposal. Loosen the screws on the drain pipe first, then remove the hose clamp from the dishwasher hose and pull off the hose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MDFNrPKU_tQ</video:player_loc>
      <video:duration>104</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8647-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lmucX9Gijlk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing Hoses and Pipes — How to Remove an Old Dishwasher</video:title>
      <video:description>First, disconnect the flexible dishwasher drain hose from the garbage disposal. Use a screwdriver to loosen the metal hose clamp securing the hose to the disposal&apos;s inlet port, then pull the hose free. Next, detach the main discharge tube. Use a screwdriver to remove the two screws holding the metal flange of the discharge tube to the side of the disposal. Once the screws are out, slide the flange back along the pipe and pull the discharge tube out of the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lmucX9Gijlk</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8647-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uHtaAyK_mAY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing — How to Remove an Old Dishwasher</video:title>
      <video:description>Before removing the disposal unit, you must first disconnect all associated plumbing. Start by loosening the nuts on the main PVC drain pipe that connects to the side of the disposal. These are often hand-tight slip nuts, but the screws on the flange connecting the pipe to the disposal may require a screwdriver. Also, locate the flexible drain hose from the dishwasher, which is typically attached with a metal compression clamp. Use a screwdriver to loosen this clamp and pull the hose off the disposal&apos;s inlet port. It&apos;s wise to have a bucket underneath to catch any trapped water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uHtaAyK_mAY</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8645-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/T-rZy5CcNfw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Water Supply — How to Remove an Old Dishwasher</video:title>
      <video:description>Begin by shutting off the hot and cold water supply using the shutoff valves located under the sink. Place a bucket underneath to catch any water. Use an adjustable wrench to carefully unscrew the nuts connecting the braided supply lines to the shutoff valves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/T-rZy5CcNfw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8645-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZHRwOhdwJtE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Cold Water Supply Fitting — How to Remove an Old Dishwasher</video:title>
      <video:description>First, shut off the cold water supply by turning the shut-off valve. Relieve pressure by opening the main kitchen faucet until the water stops running. Unscrew the existing flexible cold water supply line from the shut-off valve. Attach the provided cold water supply fitting (T-fitting) to the shut-off valve. Then, reconnect the kitchen faucet&apos;s cold water line to the top of the new fitting. Gently tighten the connections. Finally, push the green tubing from the RO kit firmly into the quick-connect port on the side of the supply fitting until it stops.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZHRwOhdwJtE</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8645-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WAEtW5r5Q-w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Dishwasher Drain Line — How to Remove an Old Dishwasher</video:title>
      <video:description>Locate the flexible drain line coming from the dishwasher, which connects to an inlet barb on the side of the garbage disposal. This line is secured by a metal hose clamp. Use a screwdriver or a nut driver to loosen the screw on the clamp. Once the clamp is loose, pull the hose off the barb. Be prepared for some water to spill out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WAEtW5r5Q-w</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8635-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ZiqkMj1HGc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Leaks (Drain) — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Perform the final leak check on the drain assembly. Push the pop-up stopper to close the drain and fill the sink with water. Check underneath for any leaks around the new drain body. Once confirmed that the stopper is holding water, push it again to open it and let the water drain completely. As the water drains, check the P-trap connections for any leaks, as the flow of water creates more pressure. If any leaks are found, slightly tighten the connections and re-test.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ZiqkMj1HGc</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8635-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_jeKZo_okwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Test the Disposal — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Mount the reassembled disposal back under the sink. Lift it up and engage the tabs with the sink flange. Turn the mounting ring clockwise to lock it securely in place. Reconnect the main drain elbow and tighten its fittings. Reattach the dishwasher hose and secure its clamp. Once all plumbing is reconnected, plug the unit back into the electrical outlet. Restore power at the circuit breaker. Run water and briefly turn on the disposal to test for proper operation and check for any leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_jeKZo_okwE</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8635-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yahN-DvUtRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>With everything reconnected, perform a final test. Run the dishwasher on a drain cycle one more time. Check under the sink for any leaks at the hose connection. Go to the sink and listen for the sound of water flowing into the garbage disposal. Visually confirm that water is no longer sputtering or spilling out of the air gap. The presenter gives a thumbs-up, indicating the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yahN-DvUtRA</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8640-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XbdNSVpwSbY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New P-Trap — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>With the wall tube and tailpiece prepared, install the new J-bend. First, align the slip-joint end of the J-bend with the wall tube and hand-tighten the slip nut. Next, push the other end of the J-bend firmly onto the tailpiece. Apply steady force until you feel it click or bottom out, which indicates the locking teeth have engaged. Adjust the alignment by swiveling the J-bend and sliding the wall tube in or out of the trap adapter as needed. Once everything is aligned without stress, fully hand-tighten all three slip nuts: at the trap adapter, between the wall tube and J-bend, and if applicable, the one on your extension tailpiece.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XbdNSVpwSbY</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8636-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9YJWPh1jw10/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Garbage Disposal — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>If you are connecting to a new garbage disposal, you must remove the knockout plug located in the dishwasher drain inlet pipe. Place the tip of a screwdriver against the plug from the outside and tap it firmly with a hammer to break it loose. The plug will fall inside the disposal. Reach into the disposal&apos;s grinding chamber to retrieve and discard the plastic plug. This step is critical; if the plug is not removed, the dishwasher cannot drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9YJWPh1jw10</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8636-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vzoZzPR0ujk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Disposal — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>If your disposer connects to your dishwasher, remove the knockout plug from the disposal by tapping with a hammer and screwdriver. Remove the plug from the disposer (it can be ground up if left in, or left in place if you don&apos;t have a dishwasher). If the disposal is hardwired, remove the electrical access plate and attach the wires according to the instructions. Lift the unit up to the mounting flange, align it, and twist the locking ring with a screwdriver until it locks into place. Reattach the drain lines to the disposer. If the disposal is larger than the old one, cut down the drain pipe with a hacksaw. Clean excess putty from the sink flange. Put a bucket or pan under the disposal, turn the water back on, and check for leaks. Plug in the disposal or turn the power back on and test again. Consult the owner&apos;s manual for items that can and cannot be put down the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vzoZzPR0ujk</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8636-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RHUPLBepZKk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Uninstall the Garbage Disposal (If Necessary) — How to Plumb a Double Kitchen Sink Drain with a Garb</video:title>
      <video:description>If you have already installed the garbage disposal without removing the knockout plug, you must first uninstall it. Begin by disconnecting the drain pipes. Then, firmly grip the disposal unit and twist it to unlock it from the mounting assembly under the sink. Carefully lower the heavy unit and place it on a stable surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RHUPLBepZKk</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8638-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5UbC1P7hOdM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Saddle — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>To dispose of waste water, a drain saddle is installed on the sink&apos;s drain pipe. Position the saddle on a straight section of the PVC tailpiece, above the P-trap. Place the foam gasket, then clamp the two halves of the saddle around the pipe. Using a power drill, drill a hole through the opening in the saddle and into the PVC pipe. Once the hole is drilled, fully tighten the two bolts on the saddle to create a seal. Finally, connect the waste water tube from the filter to the barbed fitting on the saddle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5UbC1P7hOdM</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8638-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MvODYQjkk7g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the New PVC Drain Section — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposa</video:title>
      <video:description>The plumber measures and cuts new pieces of 3-inch and 1.5-inch PVC pipe using a reciprocating saw. He then dry-fits the main component, a 3&apos; x 3&apos; x 1.5&apos; x 1.5&apos; double sanitary tee, to determine the exact lengths needed. Once measured, he applies purple PVC primer to the ends of the pipes and the inside of the fittings, followed by PVC cement. He firmly pushes the pieces together, creating the new drain assembly, including the vertical sections and the horizontal arms for the two sinks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MvODYQjkk7g</video:player_loc>
      <video:duration>211</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8638-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J0x3MUJ56Bw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Dishwasher Wye Tailpiece — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Take the new dishwasher wye tailpiece. Slide the slip nut and the beveled washer (with the beveled edge facing the tee) onto the tailpiece. Insert the tailpiece into the sanitary tee connected to the main sink drain. Ensure the dishwasher connection nipple is pointing upwards. Hand-tighten the slip nut to secure it in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J0x3MUJ56Bw</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8639-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S6LG3Mwv0z8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble P-Trap — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>The P-trap drainage system is assembled under the sink. All components, including the tailpiece extending from the sink drain, the U-shaped bend, and the trap arm connecting to the wall pipe, are connected by hand. This is a &apos;dry fit&apos; to check for proper alignment and length before any plumber&apos;s tape or sealant is used for the final, permanent installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S6LG3Mwv0z8</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8639-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cPeUJt_Imz8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Installation and Leveling — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Attach the completed standpipe and P-trap assembly to the elbow on the wall. Since a threaded P-trap is used, you can screw the two halves of the trap together. While the glue on the wall fitting is still slightly pliable, you can make minor adjustments. Tighten the threaded connection on the P-trap. Place the torpedo level against the side of the standpipe to ensure it is perfectly plumb (vertically level). Make any final adjustments before the cement fully cures.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cPeUJt_Imz8</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8639-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4bxkmqwG_QI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Method 1: Trim the Sink Tailpiece — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>The first and most straightforward solution is to shorten the sink&apos;s tailpiece (the pipe extending down from the pop-up drain assembly). By measuring and cutting off the excess length from the bottom of the tailpiece, you can raise the entire P-trap assembly, allowing the trap arm to align correctly with the higher wall drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4bxkmqwG_QI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8634-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_jeKZo_okwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power and Plumbing — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>For safety, completely disconnect the garbage disposal from its power source. Unplug the power cord from the outlet under the sink. As an extra precaution, go to your home&apos;s electrical panel and turn off the circuit breaker that controls the garbage disposal. Before disconnecting any pipes, place a bucket or container underneath to catch any water that will drain out. Use a screwdriver or pliers to loosen the hose clamp on the dishwasher drain line and pull the hose off the disposal inlet. Then, unscrew the fittings that connect the main drain elbow to the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_jeKZo_okwE</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8634-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JA1FNRFNjXE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Before performing any work, ensure your safety by completely disconnecting power to the garbage disposal. First, turn the wall switch to the &apos;off&apos; position. For absolute certainty, go under the sink and unplug the disposal&apos;s power cord from the electrical outlet. If your disposal is hardwired and cannot be unplugged, go to your home&apos;s circuit breaker panel and turn off the breaker that powers the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JA1FNRFNjXE</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8634-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/As1F18sxj5Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power Supply — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Before beginning any work, ensure your safety by turning off the power supply to the dishwasher. This can be done by unplugging the appliance from the wall outlet or by switching off the corresponding circuit breaker in your home&apos;s electrical panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/As1F18sxj5Y</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8637-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/td1ZPqs6KOM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Plumbing — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Reconnect the tailpiece and P-trap to the bottom of the newly installed sink strainer. Slide the slip nuts up and hand-tighten them onto the threads. Ensure the new tailpiece washer is correctly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/td1ZPqs6KOM</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8637-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f8L3Ha8u5-k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the P-Trap — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Now that the offset fitting has corrected the alignment, you can assemble the rest of the P-trap. Attach the tailpiece extension to the bottom of the sink drain. Then, connect the J-bend (the U-shaped portion of the trap) between the tailpiece extension and the offset fitting. Ensure all washers are properly seated before hand-tightening the slip nuts to create secure, leak-proof seals.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f8L3Ha8u5-k</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8637-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J0x3MUJ56Bw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Drain Line — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Take the cut waste arm. Remove the temporary nut and washer from the dishwasher tailpiece. Slide the slip nut and the beveled washer onto the straight end of the cut waste arm. Then, insert this end into the dishwasher tailpiece. On the elbow end of the waste arm, place the flat washer and connect it to the sink strainer. Hand-tighten all slip nuts securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J0x3MUJ56Bw</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8641-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fzxEMc68Inw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connecting the Dishwasher Drain Hose — How to Plumb a Double Kitchen Sink Drain with a Garbage Dispo</video:title>
      <video:description>With the new drain line fully assembled and the cement set, make the final connection. Slide a hose clamp over the end of the dishwasher&apos;s flexible drain hose. Push the hose firmly onto the barbed adapter at the end of the new ABS pipe. Position the hose clamp over the connection and tighten it securely with a screwdriver to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fzxEMc68Inw</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8641-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7HwF9hw2FqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Drain Hose — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Locate the dishwasher&apos;s corrugated drain hose where it connects to the sink&apos;s plumbing, often on a Y-fitting on the drain pipe or an inlet on the garbage disposal. Use a flat-head screwdriver or a socket driver to turn the screw on the hose clamp counter-clockwise, loosening it. Once the clamp is loose, grip the hose and slide it off the pipe fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7HwF9hw2FqU</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8641-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h7XivMqoYg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Drain Hose to Dishwasher — How to Plumb a Double Kitchen Sink Drain with a Garbage Disposal</video:title>
      <video:description>Identify the &apos;drain end&apos; of the new hose, which is typically the curved end. Slide a spring-style hose clamp over this end. Firmly push the hose onto the dishwasher&apos;s drain port. Using pliers, squeeze the tabs of the hose clamp to open it, then slide it over the connection point. Ensure the clamp is positioned securely between the raised ridges on the hose fitting to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h7XivMqoYg4</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8633-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A5G3lQXtBCQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Drain Stopper — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Locate the pivot rod nut on the back of the sink&apos;s tailpiece. Use channel-lock pliers to give it an initial turn to loosen it, then finish unscrewing it by hand. Pull the pivot rod out from the tailpiece. This will release the drain stopper. Go to the sink basin and lift the stopper straight out of the drain opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A5G3lQXtBCQ</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8633-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b4FU4IlyjHM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Under-Sink Linkage — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Look under the sink to examine the drain stopper mechanism. Identify the key components: the lift rod (coming down from the faucet), the clevis strap (a flat metal bar with multiple holes), the pivot rod (a horizontal rod coming out of the drain pipe), and the spring clip. Observe that the pivot rod and clevis strap are disconnected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b4FU4IlyjHM</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8633-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z-deuo8Bowg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Pivot Rod — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Connect the pivot rod to the drain body by threading the pivot rod nut onto the metal side of the rod and inserting the rod into the drain hole. Connect the lift rod to the pivot rod using the metal strap and a lock clip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z-deuo8Bowg</video:player_loc>
      <video:duration>141</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8628-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/szmmsrSkd0Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace the stopper — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Remove the old pop up stopper from the drain. Insert the new pop-up stopper into the drain, ensuring the plastic piece is oriented correctly to allow the ball rod to catch it. The plastic piece of the stopper should point vertically downward.</video:description>
      <video:player_loc>https://www.youtube.com/embed/szmmsrSkd0Q</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8628-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nmJ1bq5GLTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Pivot Rod and Pop-up — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Insert the cleaned pop-up stopper back into the sink drain. From underneath, guide the pivot rod back into its hole, ensuring it passes through the loop on the bottom of the pop-up stopper. Loosely screw on the retaining nut. Reconnect the rod to the lift strap with the spring clip. Finally, hand-tighten the retaining nut until it is snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nmJ1bq5GLTk</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8628-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y3v3Sc_ZB1Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Stopper and Pivot Rod — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Place the cleaned stopper back into the sink drain opening, making sure the loop on the bottom of the stopper is facing towards the back of the sink. From underneath, carefully slide the pivot rod back into its opening on the drain pipe. The end of the rod must pass through the stopper&apos;s loop. You may need to jiggle the stopper from above to help align it. Once the rod is correctly positioned through the loop, screw the retaining nut back on and hand-tighten it to secure the pivot rod.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y3v3Sc_ZB1Y</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8630-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q1_wmAO7kEg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Drain Mechanism — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Insert the clean stopper back into the drain, making sure that the hole in the bottom of the stopper is facing towards the back of the sink. From underneath, slide the pivot rod back into its opening, ensuring it passes through the hole in the stopper. Hand-tighten the retaining nut. Reconnect the pivot rod to the clevis strap with the spring clip. Finally, screw the decorative cap back onto the top of the stopper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q1_wmAO7kEg</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8630-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y3v3Sc_ZB1Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Stopper and Pivot Rod — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Place the cleaned stopper back into the sink drain opening, making sure the loop on the bottom of the stopper is facing towards the back of the sink. From underneath, carefully slide the pivot rod back into its opening on the drain pipe. The end of the rod must pass through the stopper&apos;s loop. You may need to jiggle the stopper from above to help align it. Once the rod is correctly positioned through the loop, screw the retaining nut back on and hand-tighten it to secure the pivot rod.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y3v3Sc_ZB1Y</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8630-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7QpWFPLYn1U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Pop-Up Mechanism — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Apply a small amount of pipe dope to the lower threads of the drain body. Thread on the tailpiece and hand-tighten. Insert the pop-up stopper into the drain from above. From underneath, insert the pivot rod through its opening, ensuring it passes through the loop on the bottom of the stopper. Tighten the pivot rod nut. Connect the lift rod strap to the pivot rod and the main lift rod from the faucet, securing it with the spring clip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7QpWFPLYn1U</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8629-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/syc3FqkLHA0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Stopper and Pivot Rod — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Place the clean stopper back into the drain, ensuring the opening on the bottom of the stopper is facing the rear of the sink. Underneath the sink, guide the pivot rod back into the tailpiece, making sure the end of the rod passes through the opening in the stopper. Once it&apos;s in place, thread the retaining nut back onto the tailpiece and hand-tighten it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/syc3FqkLHA0</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8629-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A5G3lQXtBCQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Re-install Stopper Assembly — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Begin reassembly by partially threading the pivot rod and its retaining nut back into the tailpiece. Next, from the top of the sink, insert the cleaned drain stopper back into the drain. Ensure the opening at the bottom of the stopper is facing the back of the sink to align with the pivot rod. Push the pivot rod the rest of the way in so it passes through the stopper&apos;s opening. Hand-tighten the retaining nut, then use pliers to give it a final snug turn.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A5G3lQXtBCQ</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8629-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4y5Pp0KrDE0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Lift Rod — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Attach one end of the metal spring clip to the pivot ball rod and place it onto one of the middle holes in the lift strap. Attach the other end of the spring clip to the rod. Slide the lift rod down through the back of the faucet hole and position on top of the lift strap hole. Adjust it for best pop-up action and tighten the thumbscrew.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4y5Pp0KrDE0</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8631-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X-ow54EnGjY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Drain and Pop-Up Assembly — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Insert the new drain assembly into the sink drain hole. From below, screw on and tighten the drain body. Assemble the pop-up drain mechanism by inserting the pivot rod and connecting it to the lift rod strap. Adjust as needed to ensure the stopper opens and closes correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X-ow54EnGjY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8631-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q1_wmAO7kEg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Pop-Up Drain — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>First, from above the sink, unscrew the decorative metal or plastic top cap from the pop-up stopper. Next, go under the sink and locate the pivot rod connected to the drain pipe. Disconnect this rod from the vertical clevis strap by squeezing the spring clip. Place your bucket directly under the drain. Now, unscrew the retaining nut holding the pivot rod to the drain pipe and pull the pivot rod straight out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q1_wmAO7kEg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8631-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0QPjVk5lJYc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Drain Lever — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Connect the mechanical linkage for the pop-up drain. Insert the horizontal pivot rod into the drain body and hook it to the bottom of the stopper. Attach the vertical lift rod to the pivot rod using the clip. Use a screwdriver to tighten the screw that connects the lift rod to the faucet&apos;s pull-up rod, ensuring the stopper opens and closes correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0QPjVk5lJYc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8632-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7o2G2dqKgWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Pop-Up Linkage — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>From underneath the sink, locate the horizontal pivot rod that goes into the back of the drain tailpiece. Unscrew the cap nut holding it in place. Once the nut is off, pull the pivot rod out of the tailpiece to disconnect it from the pop-up stopper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7o2G2dqKgWI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8632-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nmJ1bq5GLTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Pivot Rod — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Unscrew the retaining nut that holds the pivot rod in the side of the tailpiece. Once the nut is off, pull the pivot rod straight out. This will disconnect it from the pop-up stopper inside the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nmJ1bq5GLTk</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8632-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FM5pYiOajVY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Lift Rod — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Disconnect the lift rod assembly from the drain pipe. Squeeze the spring clip holding the strap to the pivot rod and slide it off. This will free the lift rod from the drain stopper mechanism.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FM5pYiOajVY</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8627-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NuiaqKXdcqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Old P-Trap Removal — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Begin by placing a large bucket or basin directly underneath the existing P-trap to catch any water that will be released upon disassembly. Using a pair of channel-lock pliers, grip the slip-joint nuts connecting the P-trap to the vertical tailpiece from the sink and the horizontal drain arm going to the wall. Turn the nuts counter-clockwise to loosen them. Once loose, finish unscrewing them by hand and carefully lower the P-trap, allowing the trapped water to drain into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NuiaqKXdcqg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8627-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CuqmpWETsiA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Before disassembling any plumbing, prepare the area to manage water spillage. If there is standing water in the sink, allow it to drain completely, which may take several hours or overnight. Place old towels on the cabinet floor directly beneath the pipes. Position a bucket or a large bowl under the P-trap to catch any remaining water and debris that will come out when the trap is removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CuqmpWETsiA</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8627-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6raopxKEJSQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Workspace — How to Remove and Replace a Bathroom Sink Pop-Up Stopper</video:title>
      <video:description>Begin by diagnosing the likely cause of the non-retracting sprayer, which is often a detached weight. To access the faucet&apos;s plumbing, open the cabinet doors beneath the sink and carefully remove all cleaning supplies, containers, and other items to create a clear and accessible workspace. Using a flashlight can help to see the plumbing more clearly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6raopxKEJSQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8620-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TRQRODAHzv4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks and Functionality — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Slowly turn the hot and cold water supply valves back on. Go to the faucet and turn the water on to test the function of both the main faucet and the new sprayer. While the water is running, go back under the sink and run your hand around the connection point to check for any leaks. If it&apos;s dry, the project is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TRQRODAHzv4</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8620-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KguLfUVFXqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Testing the Installation — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Slowly turn the water back on at both the hot and cold shut-off valves. Carefully inspect all connection points—at the base of the faucet and at the shut-off valves—for any signs of leaks. Use a flashlight and a dry paper towel to help spot drips. Once you&apos;ve confirmed there are no leaks, turn the faucet handle to test both hot and cold water flow and check that the faucet operates smoothly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KguLfUVFXqU</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8620-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nhfjz78qCqs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test Faucet — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Reassemble the faucet assembly without the removed flow restrictor. Screw the central mixing valve back into its base, reattach the spout and tighten the set screw, and reinstall the hot and cold valve handles. Turn the main water supply back on. Test the faucet by turning on the water and observing the significantly improved pressure. Finally, use a flashlight to thoroughly inspect all connections under the tub deck for any signs of leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nhfjz78qCqs</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8623-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ZiqkMj1HGc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Existing Faucet — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Now, disconnect all parts of the old faucet. Start by using a crescent wrench to unscrew the water supply lines from the base of the old faucet. Next, unclip the spring clip that connects the clevis strap to the pivot rod of the drain stopper assembly. Unscrew the two plastic mounting nuts that hold the faucet body to the underside of the countertop. This can be awkward, so work in whatever order is most accessible. Once everything is disconnected, lift the old faucet straight up and out of the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ZiqkMj1HGc</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8623-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cmFfLbY7tlQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Remove the old faucet by unscrewing the mounting nut underneath the sink. Loosen and remove the mounting nut securing the faucet to the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cmFfLbY7tlQ</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8623-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bvq48PVNch8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>With all connections underneath the sink removed, grasp the old faucet from the top and lift it straight up. This will remove the entire assembly from the sink, exposing the mounting holes and the surface underneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bvq48PVNch8</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8619-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nmJ1bq5GLTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Pivot Rod — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Unscrew the retaining nut that holds the pivot rod in the side of the tailpiece. Once the nut is off, pull the pivot rod straight out. This will disconnect it from the pop-up stopper inside the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nmJ1bq5GLTk</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8619-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/syc3FqkLHA0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Pivot Rod from Lift Strap — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Locate the pop-up drain linkage under the sink. Identify the horizontal pivot rod connected to the vertical, perforated strap (clevis) via a small metal spring clip. Squeeze the two prongs of the spring clip together with your fingers and slide it off the clevis. Then, pull the pivot rod out of the hole in the clevis to completely disconnect the linkage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/syc3FqkLHA0</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8619-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Aod9jgqUn2g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect the Stopper Assembly — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Begin by going under the sink to locate the drain tailpiece. Find the retaining nut that holds the pivot rod in place. Unscrew this nut by hand, turning it counter-clockwise. Once the nut is free, pull the pivot rod straight out from the tailpiece. This action disconnects the stopper from the lift rod mechanism, allowing it to be removed from the sink basin.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Aod9jgqUn2g</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8621-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ut6JRWBBVGs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Water Supply Lines — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Connect the faucet&apos;s hot and cold water supply lines to the corresponding shut-off valves on the wall. The hot line is typically marked with a red indicator, and the cold with blue. Hand-tighten the nuts first, then use an adjustable wrench to give them a final quarter-to-half turn to ensure a snug, leak-free seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ut6JRWBBVGs</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8621-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SC6AzFfZOp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Water Valves — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Connect the free ends of the flexible water supply lines to the corresponding hot and cold water shut-off valves under the sink. The red-marked line typically connects to the hot water valve (left) and the blue-marked line connects to the cold water valve (right). Tighten the connections by hand, then give them a final quarter-turn with an adjustable wrench. The video simulates this by showing water flowing into the lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SC6AzFfZOp0</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8621-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NISEmUtwwck/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Hot and Cold Water Lines — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Connect the faucet&apos;s hot and cold water supply lines to the corresponding angle valves on the wall. The hot line is typically marked with a red indicator. Hand-tighten the connectors first, then use an adjustable wrench to give them a final, snug turn. Be careful not to over-tighten. Note that you can swap the lines on the valves to adjust the direction for hot and cold on the faucet handle if desired.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NISEmUtwwck</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8622-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xk1iW4gvtF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Faucet from Underneath — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>From underneath the sink, install the mounting hardware onto the faucet&apos;s threaded shank in the following order: stabilization ring, rubber gasket, and then the metal washer. Thread the basin nut onto the shank. Before tightening the nut completely, insert the two basin screws into the nut. Hand-tighten the basin nut, then use a basin wrench to make it snug. Finally, use a Phillips screwdriver to tighten the two screws evenly, which will firmly secure the faucet in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xk1iW4gvtF8</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8622-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yEr985qOJjs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Faucet Under the Sink — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>From underneath the sink, assemble the mounting hardware onto the faucet shank. The correct order is typically the rubber washer first, then the brass washer, and finally the locking clamp. Hand-tighten the locking clamp to hold the faucet in place. Check the faucet&apos;s alignment from above, then use pliers to give the clamp a final quarter-turn. Finish by tightening the two set screws on the locking clamp with a screwdriver to fully secure the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yEr985qOJjs</video:player_loc>
      <video:duration>98</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8622-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F96G4wx3TFw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Mount Faucet — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Assemble the new faucet by sliding the chrome base plate and then the upper rubber washer onto the faucet&apos;s threaded shank. Insert the faucet through the hole in the sink or countertop. From underneath, slide on the lower rubber washer, the star washer, and the mounting nut. Hand-tighten the nut and then use a wrench to fully secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F96G4wx3TFw</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8624-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NVFnaygxCpA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Surfaces — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Thoroughly clean the old, crumbled plumber&apos;s putty from the sink flange and the sink drain opening. Scrape away all residue to ensure a clean surface for the new putty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NVFnaygxCpA</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8624-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hkLOk74lRe0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Sink Drain Opening — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>After removing the old flange, use a putty knife or a similar scraping tool to remove all of the old, dried-out plumber&apos;s putty from around the sink&apos;s drain opening. Once the bulk of the putty is gone, use a paper towel or rag to wipe the surface clean, ensuring a smooth, debris-free surface for the new installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hkLOk74lRe0</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8624-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/686O3THErJc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Sink and Install New Flange — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>First, thoroughly clean the area around the sink drain to remove any old plumber&apos;s putty and grime. Use a rag for this. Next, take a new piece of plumber&apos;s putty, roll it into a rope, and form a ring around the underside of the new sink flange. Press the new flange firmly into the sink drain, ensuring the putty creates a complete seal. Scrape away any excess putty that squeezes out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/686O3THErJc</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8618-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I7STSQ14wWg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Drain Assembly — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Begin by removing the stopper from the sink drain. From underneath the sink, use channel-lock pliers to grip and loosen the large locknut that secures the drain assembly. Once broken loose, you can unscrew the nut, locking ring, and washers by hand. Push the old drain body up and out of the sink hole to remove it completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I7STSQ14wWg</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8618-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EjxTuJhEsHw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Plumbing — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Carefully disassemble the current drain plumbing from beneath the sink, making sure to drain the p-trap. Unscrew all slip nuts and fittings attaching the p-trap. Unscrew and remove the drain flange from the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EjxTuJhEsHw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8618-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E4uevfq5T2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Existing Sink Drain and Plumbing — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Place a bowl or bucket under the sink to catch any residual water from the P-trap. Use channel lock pliers to loosen the slip nuts connecting the P-trap and tailpiece to the sink drain and wall drain. Once loosened, these can usually be unscrewed by hand. Remove the P-trap and drain pipes. Next, unscrew the large locknut holding the existing sink strainer in place from underneath the sink. Once the locknut is removed, push the old strainer up and out of the sink hole. Clean any old plumber&apos;s putty or residue from around the sink hole.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E4uevfq5T2c</video:player_loc>
      <video:duration>118</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8625-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x1_doPMR-bo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect the Faucet&apos;s Cold Water Line — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Place a towel under the cold water valve to catch any spills. Use an adjustable wrench to loosen the nut connecting the flexible, braided faucet line to the shut-off valve by turning it counter-clockwise. Once loose, you can finish unscrewing it by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x1_doPMR-bo</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8625-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u4aXzB9kTLY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Faucet — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Disconnect the water supply lines from the faucet using an adjustable wrench.  Loosen the nuts connecting the supply lines to the faucet inlets by turning them counterclockwise. Once disconnected, set the faucet aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u4aXzB9kTLY</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8625-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Dzn_5KfS99c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Mixing Valve Connection — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Using an adjustable wrench, carefully loosen the large hexagonal nut that connects the cold water supply pipe to the mixing valve. Position a towel underneath the connection to catch any remaining water that will drip out. Once the nut is broken loose with the wrench, you should be able to finish unscrewing it by hand. Pull the pipe away from the valve to expose the internal washer and connection point.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Dzn_5KfS99c</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8617-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yQjJ6QVX344/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Under-Sink Plumbing — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Prepare the existing plumbing under the sink for the modification. The most critical part of this step is to shut off the main water supply to your house. Once the water is off, open the cold water tap on the sink to relieve any pressure and drain remaining water from the line. Place your towel under the cold water shut-off valve. Using an adjustable wrench, carefully loosen and remove the existing flexible supply line that connects the shut-off valve to the sink&apos;s faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yQjJ6QVX344</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8617-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8hMo-HI56oY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet and Drain Plumbing — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Before starting the work, the water supply is turned off using the shutoff valves under the sink. A bucket is placed under the drain pipes to catch water. The old drain assembly, including the two P-traps, is disassembled by hand-loosening the slip nuts. The water supply lines are then disconnected from the old faucet. Using a basin wrench and pliers from underneath the sink, the mounting nuts holding the old faucet are removed. Once loosened, the homeowner pulls the old faucet out from the top of the countertop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8hMo-HI56oY</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8617-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8aEl5TyRGVQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Faucet — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>First, shut off the hot and cold water supply by turning the shut-off valves under the sink clockwise. Place a bucket underneath to catch drips. Use a basin wrench or adjustable wrench to disconnect the water supply lines from the old faucet. Unscrew the mounting nuts holding the old faucet in place. Once loose, lift the entire old faucet assembly out from the top of the sink and clean the area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8aEl5TyRGVQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8626-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HjQVuJ_zUWM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Drain Fitting — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Apply a thick ring of plumber&apos;s putty around the underside of the new drain fitting&apos;s flange. Insert the new brass fitting into the drain opening from inside the tub. From below, attach the gasket and thread on the new drain shoe. Use a drain wrench from above and pliers from below to tighten the assembly until the excess putty squeezes out, creating a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HjQVuJ_zUWM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8626-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EaQVpiHTEGM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Sink Strainer — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Take a generous amount of plumber&apos;s putty and roll it in your hands to form a rope-like shape. Wrap this putty rope around the underside of the new sink strainer&apos;s flange. Insert the strainer into the sink drain hole and press down firmly to create a seal. From underneath the sink, install the rubber gasket, the other gasket, and then tighten the large metal nut to secure the strainer in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EaQVpiHTEGM</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8626-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mYvzpxcwHLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Sink Strainers — How to Replace a Two-Handle Bathroom Faucet</video:title>
      <video:description>Take a small amount of plumber&apos;s putty and roll it into a rope shape. Apply the putty rope to the underside of the new strainer&apos;s flange. Press the strainer firmly into the sink hole from the top. From underneath, install the rubber gasket, fiber washer, and the large metal locknut. Use a sink installer tool to hold the strainer from the inside while you tighten the locknut from below with pliers to ensure it&apos;s secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mYvzpxcwHLc</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8612-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8Lpq-VhJGx8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle and Trim — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Begin disassembling the faucet by prying off the decorative cap on the handle. Use a Phillips screwdriver to loosen and remove the screw inside. Pull the handle straight off. Next, unscrew the large metal collar by turning it counter-clockwise. To remove the escutcheon plate, use a utility knife or razor scraper to carefully cut the old silicone caulk sealing it to the wall, then pull the plate away.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8Lpq-VhJGx8</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8612-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r9pFYBK2o50/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Escutcheon Plate — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>To access the shower valve&apos;s integrated shut-offs, you first need to remove the decorative escutcheon plate. Begin by using a utility knife to carefully cut through the old caulk sealing the plate to the shower wall. Then, locate and remove the two screws, typically Phillips head, that secure the plate. You may also need to remove the faucet handle first, which is usually held on by a small set screw requiring an Allen wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r9pFYBK2o50</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8612-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ajw94SkqRAg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Handle and Trim — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Begin by using an Allen wrench to loosen the set screw located on the underside of the shower handle. Once loose, pull the handle straight off. Then, remove the chrome cover sleeve. Finally, use a drill or screwdriver to remove the two screws securing the large, round escutcheon plate to the wall, and set the plate aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ajw94SkqRAg</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8615-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e2rtFpKCsjM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Valve and Piping — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Position the new valve assembly inside the wall cavity. Dry-fit the new sections of copper pipe and ProPress fittings to connect the valve to the existing hot, cold, and shower riser pipes. Once you confirm the layout is correct, use a ProPress crimping tool to systematically press each fitting, creating a permanent and watertight connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e2rtFpKCsjM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8615-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ACSCAxyg_PM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Valve and Piping — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Place the new shower valve into its mounting bracket and secure it. Connect new PEX or copper pipes to the hot, cold, and shower riser ports on the valve. Use appropriate press fittings and a press tool to create secure, watertight connections on all pipes. Ensure the shower riser pipe is properly positioned and secured.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ACSCAxyg_PM</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8615-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5rlIUL7v5SQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Valve and Connect Pipes — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Prepare and install the new single-handle shower valve. If needed, add a wooden support block between the wall studs to securely mount the new valve. Assemble the new pipe connections using copper pipes and ProPress fittings. Use a press tool, such as the Rigid RP 241 shown, to crimp the fittings onto the pipes, creating a permanent, watertight seal for the hot, cold, and shower riser connections. This method eliminates the need for soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5rlIUL7v5SQ</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8614-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qSmc0lbCFp8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Slowly turn the shut-off valves back on to restore water pressure to the system. Once the water is on, take a dry towel and wipe all the joints and connections you worked on. Carefully feel around each joint with your hand to check for any drips or moisture, which would indicate a leak. After waiting about 20 minutes, perform a final check.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qSmc0lbCFp8</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8614-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NLM5SaKFY3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flushing and Leak Testing — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Before completing the installation, it&apos;s essential to flush the new valve. With the cartridge still removed, turn the main water supply back on. Direct the flow of water out of the valve and into the tub using a piece of cardboard or plastic to prevent splashing. Let it run for a few seconds to clear any debris, such as flux or solder bits, from the lines. While the water is on, carefully inspect all new solder joints for any signs of leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NLM5SaKFY3g</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8614-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jHOal59RktY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pressurize and Test for Leaks — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>After the bypass assembly is fully installed, it&apos;s time to test for leaks. First, ensure all three of the newly installed ball valves are in the closed position. Go to the main water shut-off valve for the house and turn it on very slowly. Listen for the sound of pipes filling. Return to the bypass assembly and meticulously inspect every new fitting and connection for any signs of water drips or leaks. Once you&apos;re confident there are no leaks, open the main bypass valve to restore water to the rest of the house.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jHOal59RktY</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8609-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EqPKzaVW_l4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Before starting any work on the faucet, go under the sink and locate the two water supply shut-off valves, one for the hot water line and one for the cold. Turn both valve handles clockwise until they stop to completely shut off the water supply to the faucet. This is the most critical step to prevent water from spraying everywhere once you begin disassembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EqPKzaVW_l4</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8609-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lmdbyMDzC90/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Remove Old Faucet — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Begin by turning off the hot and cold water supply valves located near the tub. Place a towel on the floor to catch any residual water. Open the faucet handles to relieve any pressure and confirm the water is completely shut off. Using an adjustable crescent wrench, loosen the nuts connecting the water supply lines to the back of the existing faucet. Then, loosen and remove the larger locknuts that secure the faucet body to the tub. Once all connections are loose, lift the old faucet away from the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lmdbyMDzC90</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8609-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rWF0keDlveo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Begin by gathering all the necessary tools and replacement parts. This includes a flashlight for visibility under the sink, plumber&apos;s tape for sealing threads, a wire brush for cleaning, various screwdrivers, a socket set, adjustable crescent wrenches, and the correct replacement faucet cartridges for both hot and cold sides. Also, new flexible braided supply lines are shown as a recommended upgrade from old rigid pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rWF0keDlveo</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8610-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZY41uRwiM4g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Tub Spout — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Install the new tub spout. Align it over the tub spout nipple, and screw it in place using pipe sealant on the threads. If it&apos;s the slip on type, it may use a setscrew to hold it in place and in that case push it into the wall as far as it will go and tighten the set screw. Clean away any excess plumbers putty and you&apos;re done.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZY41uRwiM4g</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8610-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bkZLAeTSYFQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Seal — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Clean up the area around the newly installed tub spout, removing any debris or residue. Turn on the water to test the spout and check for leaks. If leaks are detected, slightly tighten the Allen screw, if necessary.  Once the new spout is functioning correctly, apply a bead of silicone caulk around the base of the spout where it meets the wall or tub. This prevents water from seeping behind the tile or wall surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bkZLAeTSYFQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8610-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/evktxPjLjpI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Operation and Finalize — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Turn the main water supply back on. Test the new cartridge by turning the handle. The operation should now be smooth and easy. Check for any leaks around the handle or from the tub spout. As a final step, apply a neat bead of silicone caulk around the outer edge of the escutcheon plate to create a watertight seal against the shower wall, preventing water from getting behind the tile.</video:description>
      <video:player_loc>https://www.youtube.com/embed/evktxPjLjpI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8611-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ACSCAxyg_PM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Wall Access — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>To begin the project, access the plumbing behind the shower. Use a level to draw straight, level lines on the drywall to mark out an access panel. Then, use an oscillating multi-tool to carefully cut along the marked lines. Once all sides are cut, remove the section of drywall to expose the wall cavity containing the shower valve and pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ACSCAxyg_PM</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8611-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V4EGn48Jyg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan and Measure — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>The first step is to plan the installation. After confirming the need for an access panel to reach the bathtub plumbing, unbox the new access panel. Use a tape measure to determine the exact dimensions of the panel. Then, measure the space within the wall studs to ensure the panel will fit correctly and that the opening will provide sufficient room to work on the plumbing components in the future.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V4EGn48Jyg4</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8613-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uvQK7WTkKpI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>California Patch — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>For holes larger than fist-sized, create a custom drywall patch using scrap wood as backing. Cut a square of drywall slightly larger than the damaged area.  Cut a smaller square within the larger piece, leaving a frame. Remove the inner square, creating a frame. Secure the wood backing to the wall studs with screws.  Apply a generous amount of drywall compound to the perimeter and inside of the patch, then firmly press the drywall frame into the mud. Use a putty knife to apply more mud and cover the entire patch. Let it dry completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uvQK7WTkKpI</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8613-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6xCg05ismO4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch the Drywall — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>After the plumbing repair is complete and tested, clean up any debris from inside the wall. Cut a new piece of drywall to fit the opening precisely. If necessary, add wood backing or &apos;cleats&apos; inside the wall cavity, attached to the existing studs, to provide a surface for the edges of the patch to screw into. Secure the drywall patch to the studs and backing using drywall screws with a drill.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6xCg05ismO4</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8613-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ec5ZIdyvfNA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finish Drywall (Mud, Texture, Paint) — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Finish the drywall patch for a seamless look. Apply fiberglass mesh tape over all the seams. Using a putty knife, apply a thin first coat of joint compound over the tape, filling the beveled gaps. Allow it to dry, then sand lightly. Apply a wider second coat, feathering the edges. Once dry, sand smooth. Finally, apply wall texture to match the surrounding wall and paint the entire area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ec5ZIdyvfNA</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8616-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YksuwpRH0qA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Access — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Begin by assessing the work area. The old valve has been removed, leaving an access hole in the tile wall with the hot and cold copper pipes exposed. Stuff rags into the wall cavity below the pipes to catch any debris and prevent tools or parts from falling down the wall. Ensure the main water to the house is shut off and the lines are drained. Remove any temporary caps, such as the SharkBite caps shown, from the ends of the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YksuwpRH0qA</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8616-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o-UVrvWbu28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pipe and Fitting Preparation — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>Before soldering, prepare all components. Cut the copper pipes for the shower riser and tub spout to the necessary lengths using an auto-cut tool or a standard pipe cutter. Use emery cloth to thoroughly clean the outside ends of the copper pipes and the inside of all fittings, including the valve ports and elbows, until they are shiny. This is crucial for a proper solder joint. Next, using pliers and a screwdriver, remove the plastic valve cartridge and the side stops from the brass valve body to protect them from heat damage during soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o-UVrvWbu28</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8616-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7cpl_qs5heI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Plumb New Valve — How to Replace a Two-Handle Shower Faucet</video:title>
      <video:description>With the old valve removed, position the new pressure-balance valve in the opening. Dry-fit new sections of copper pipe and fittings to connect the new valve to the existing hot supply, cold supply, shower head pipe, and the tub spout pipe. Ensure all pipes are cut to the correct length and the valve body is centered in the wall opening. Clean all copper pipe ends and fittings and apply flux in preparation for soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7cpl_qs5heI</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8603-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lmpixiAR_RQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Before beginning any work, locate the hot and cold water shutoff valves under the kitchen sink. Turn the handles clockwise until they are fully closed to stop the water flow. Open the faucet above to drain any remaining water from the lines and confirm that the supply is completely off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lmpixiAR_RQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8603-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cQszSvQq1rM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Disconnect Supply Lines — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Locate the hot and cold water shutoff valves under the sink. Turn the handles clockwise to completely shut off the water supply. Once off, use an adjustable wrench to loosen and disconnect the faucet&apos;s flexible supply lines from both shutoff valves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cQszSvQq1rM</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8603-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H3b8_GfgZR4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Water Supply Line — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>First, locate the water shutoff valve (angle stop) under the sink. Turn the handle clockwise until it stops to shut off the water supply. Using a pair of adjustable pliers, grip the nut connecting the braided supply line to the valve and turn it counter-clockwise to loosen and remove the line. Have a small towel ready to catch any dripping water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H3b8_GfgZR4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8604-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oKIrwHl_3F8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old O-Rings — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>With the spout removed, use a small, flat-bladed screwdriver to carefully pry off the old, worn-out O-rings from the base of the spout. There may be two rubber O-rings and one or two plastic spacer rings. Pry them out of their grooves, being careful not to scratch the metal surface of the spout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oKIrwHl_3F8</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8604-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wRgusJ3Jil0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Lubricate New O-Rings — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>First, apply a coating of faucet grease into the empty grooves on the faucet base where the O-rings will sit. This helps lubricate the area for installation. Next, take the three new O-rings and slip them over the faucet base, seating each one into its respective groove. Once they are in place, apply another liberal coat of faucet grease to the exterior of the new O-rings. This lubrication is crucial for allowing the spout to slide back on smoothly and prevents the O-rings from pinching, tearing, or getting dislodged during reassembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wRgusJ3Jil0</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8604-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oKIrwHl_3F8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lubricate New O-Rings — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Apply a liberal amount of plumber&apos;s silicone grease from the tube directly onto the new O-rings. Use your finger to spread the grease evenly around all the seals. This lubrication helps the spout slide back into the faucet body smoothly and creates a better seal while protecting the rings from tearing during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oKIrwHl_3F8</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8607-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PYKt2HqA3iY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Faucet — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Reassemble the faucet components in the reverse order of disassembly. Place the escutcheon plate over the valve stem and align it with the screw holes. Insert and tighten the two screws with a Phillips head screwdriver, but do not overtighten. Slide the handle adapter onto the cartridge stem if your model has one. Then, place the handle onto the stem, tighten the set screw with the Allen wrench, and press the decorative cap back into place on the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PYKt2HqA3iY</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8607-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sr0FJIIOFnw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Faucet — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Begin reassembling the faucet in the reverse order of disassembly. Place the chrome sleeve back over the new cartridge. Position the escutcheon plate against the wall, aligning the screw holes, and secure it with the two long screws. Tighten the screws evenly, but do not overtighten. Place the white plastic temperature adapter onto the cartridge stem, followed by the main handle. Secure the handle with the center screw using the Phillips screwdriver. Finally, snap the decorative cap back into place on the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sr0FJIIOFnw</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8607-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5DAmRkH1IUc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Handle and Trim — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Reassemble the faucet in the reverse order of disassembly. Screw the chrome escutcheon sleeve back on until it is snug against the tile. Place the handle back onto the new valve stem, aligning it correctly. Insert the Phillips head screw and tighten it firmly with your screwdriver. Finally, press the decorative cap back into the center of the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5DAmRkH1IUc</video:player_loc>
      <video:duration>160</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8608-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s8bpfAP9GYQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Cartridge — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>With the handle and decorative cover removed, you will see a large brass retaining nut holding the cartridge in place. Use an adjustable wrench to grip the nut and turn it counter-clockwise to loosen and remove it. After the nut is removed, firmly grasp the plastic stem of the old cartridge and pull it straight up and out of the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s8bpfAP9GYQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8608-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9hjbTzcaXx0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle and Bonnet Nut — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Unscrew the faucet handle from the valve body by turning it counter-clockwise. Once the handle is removed, you will see the brass bonnet nut that secures the cartridge. Use slip-joint pliers or an adjustable wrench to loosen and unscrew this nut. A rag can be placed between the tool and the nut to prevent scratching the finish. Lift the nut off to expose the cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9hjbTzcaXx0</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8608-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oB1jRBEzfOc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Begin by prying off the decorative cap from the center of the faucet handle using a small flathead screwdriver. Once the cap is removed, use a Phillips head screwdriver to loosen and remove the screw that secures the handle to the cartridge stem. Pull the handle straight off and set it aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oB1jRBEzfOc</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8606-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Kmn6LGWkRMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Go back under the sink and turn the hot water shutoff valve back on by turning it counter-clockwise. Return to the faucet and operate the hot water handle, letting the water run for a minute to clear any air from the line. Carefully check around the base of the handle and the spout for any signs of leaking water. If there are no leaks, the repair is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Kmn6LGWkRMM</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8606-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-eUmsEmwWD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Before fully reassembling the faucet, turn the main water supply back on. Test the repair by turning the valve stem to let water run, and then turn it to the off position. Check carefully to ensure there are no more drips or leaks from the faucet or spout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-eUmsEmwWD4</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8606-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LHg2XC3xhIg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Test — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>With the faucet fully reassembled, go back and turn the water supply back on. It&apos;s best to do this slowly to avoid a sudden rush of pressure. Return to the sink and check for any leaks around the handle you just repaired. Turn the faucet handle on and off several times to confirm that the dripping has stopped and it is functioning properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LHg2XC3xhIg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8605-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-8MdNMhrgsw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Faucet Handle — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Using an Allen wrench, locate the set screw on the underside of the faucet handle. Turn the Allen wrench counter-clockwise to loosen the screw. Once loose, pull the handle straight off the valve stem. It is not necessary to completely remove the set screw from the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-8MdNMhrgsw</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8605-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J8jb6MYGlr4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen the Handle Set Screw — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>Identify the specific faucet handle that needs repair. Locate the small set screw, which is typically found on the underside of the handle. Select the correct size Allen wrench from a set that fits snugly into the screw head. Insert the Allen wrench and turn it counter-clockwise to loosen the screw. You only need to loosen it enough to allow the handle to be removed; it is not necessary to take the screw out completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J8jb6MYGlr4</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8605-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cVUlt7MJaoU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Faucet Handle — How to Repair a Leaky Faucet Base (Single Handle)</video:title>
      <video:description>To remove the faucet handle, locate the small set screw, which is typically on the underside of the handle. Use the appropriate size Allen wrench to loosen this screw by turning it counter-clockwise. You do not need to remove the screw completely. Once loose, the handle can be pulled straight off the valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cVUlt7MJaoU</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8588-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SAz-1n_sTwM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace the Old O-Rings — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Inspect the base of the removed spout. You will see two black O-rings. Carefully remove the old, worn O-rings. If they are brittle or stuck, you can use a small flathead screwdriver or a pick to gently pry them off. After removing them, clean the spout base with a rag or tissue. Take the new O-rings, apply a small amount of plumber&apos;s grease to them, and slide them into the grooves on the spout base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SAz-1n_sTwM</video:player_loc>
      <video:duration>132</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8588-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jEhk4xTL1Pw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace the Adapter O-Ring — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Once the spout is removed, inspect the adapter connected to the copper pipe. For this type of installation, the seal is created by an O-ring. Use a small screwdriver or pick to carefully pry off the old O-ring from the adapter. Take the new O-ring that came with your replacement spout and carefully slide it into the groove on the adapter, being careful not to roll or twist it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jEhk4xTL1Pw</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8588-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wRgusJ3Jil0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test Faucet — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>With the new O-rings installed and lubricated, carefully slide the high-rise spout back down onto the faucet base. Push down gently and rotate it slightly to ensure it seats properly over the new O-rings. Take the retaining collar and hand-thread it back onto the faucet base. Tighten it firmly by hand; tool-tightening is usually not necessary and risks damaging the part. Once assembled, turn on the hot and cold water to test the repair and check for any leaks around the spout base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wRgusJ3Jil0</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8591-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Yv8VGeCFwIc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Seals, Springs, and O-Rings — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve</video:title>
      <video:description>Using a small screwdriver or a dental pick, reach into the two holes inside the faucet body and carefully pull out the old rubber seats and the springs underneath them. Next, lift the entire spout assembly straight up and off the faucet body. Using needle-nose pliers, grab and remove the two old O-rings from the base of the faucet body. Wipe the area clean with a rag to remove any debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Yv8VGeCFwIc</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8591-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-eUmsEmwWD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Seats and Springs — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Inspect the inside of the valve body to locate the two black rubber seats and the springs behind them. The video shows that one of the seats is damaged, which is the cause of the constant leak. Use an Allen wrench or a small pick to carefully hook and remove both the old rubber seats and the springs from their sockets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-eUmsEmwWD4</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8591-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bnCn5MCF9s8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Ball and Reassemble Top — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Ty</video:title>
      <video:description>Place the new faucet ball on top of the newly installed seats and springs. Align the slot on the side of the ball with the small pin inside the faucet body. Once aligned, place the cam gasket, the plastic cam, and the retainer nut back on top and hand-tighten the nut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bnCn5MCF9s8</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8592-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eog9Xa2fD6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Faucet Head — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Place the new faucet ball on top of the newly installed seats and springs. Ensure that the small notch on the side of the ball aligns with the small pin inside the faucet body. This alignment is crucial for proper operation. Next, place the cam gasket, the plastic cam, and finally the chrome retainer nut over the ball stem. Hand-tighten the retainer nut by turning it clockwise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eog9Xa2fD6c</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8592-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rqOd6P81qw4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Reassemble the faucet by following the disassembly steps in reverse. First, screw the dome cap back on. Next, place the handle back on the stem while it&apos;s in the &apos;on&apos; position, then push it down to the &apos;off&apos; position. Align the handle and tighten the set screw with the 3/32&apos; Allen wrench until it is snug. Do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rqOd6P81qw4</video:player_loc>
      <video:duration>143</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8592-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EG-N-i00IXM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet and Test — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Reassemble the faucet in the reverse order of disassembly. Screw the retaining nut back on. Slide the decorative sleeve on, followed by the escutcheon plate, and secure it with the two screws. Place the handle on the stem, tighten the set screw with the Allen wrench, and screw the handle cap back on. Once fully assembled, turn the main water supply back on and test for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EG-N-i00IXM</video:player_loc>
      <video:duration>97</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8587-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8262L9LurJI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plumbing Preparation — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Locate the cold water shut-off valve, typically found under the kitchen sink, and turn it completely off. To prevent spills, turn on the kitchen faucet to release any remaining water and pressure from the line. Once the water stops flowing, use an adjustable wrench to loosen the nut and remove the original faucet hose from the cold water shut-off valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8262L9LurJI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8587-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c4kBePjMZbU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Work Area and Shut Off Water — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve T</video:title>
      <video:description>Before disassembling the faucet, you must prepare the work area. First, pull the lift rod at the back of the faucet to close the sink drain stopper. This will prevent any small parts, like the set screw, from being lost down the drain. Second, and most importantly, locate the hot and cold water shutoff valves under the sink and turn them clockwise until they are fully closed to shut off the water supply to the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c4kBePjMZbU</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8587-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cQszSvQq1rM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Disconnect Supply Lines — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-V</video:title>
      <video:description>Locate the hot and cold water shutoff valves under the sink. Turn the handles clockwise to completely shut off the water supply. Once off, use an adjustable wrench to loosen and disconnect the faucet&apos;s flexible supply lines from both shutoff valves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cQszSvQq1rM</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8589-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s8bpfAP9GYQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Use a small, pointed tool like a dental pick or a small flathead screwdriver to carefully pry off the decorative cap on the front of the faucet handle. This will expose the set screw. Insert an Allen wrench into the set screw and turn it counter-clockwise to loosen it. You do not need to remove the screw completely. Once loose, lift the handle straight up to remove it from the faucet body. Then, unscrew the chrome decorative dome cover by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s8bpfAP9GYQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8589-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JbobHlxWabU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>First, carefully pry off the small decorative plug indicating hot and cold on the handle. This will reveal a set screw inside. Insert the correct size Allen wrench into the hole and turn it counter-clockwise several times to loosen the handle. You do not need to remove the screw completely. Lift the handle straight up and off the faucet body. Then, unscrew the large plastic cap underneath the handle by turning it counter-clockwise and remove it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JbobHlxWabU</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8589-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h7UDJlTmOy4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle and Cap — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Locate the small set screw on the base of the faucet handle, usually on the back. Use a 3/32 inch Allen key to turn the screw counter-clockwise, loosening it enough to remove the handle. You do not need to remove the screw completely. Lift the handle straight up and off the valve stem. Once the handle is off, unscrew the chrome decorative cap by hand to expose the cartridge retaining nut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h7UDJlTmOy4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8590-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vb_hw5zkaHs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pry Off Handle Caps — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>For each loose handle, carefully pry off the decorative cap from the top center to expose the retaining screw underneath. It is recommended to use your fingernail to get under the edge of the cap and gently pry it upwards. Using a metal tool like a screwdriver could scratch the faucet&apos;s finish. Place the caps aside, making note of their orientation for reassembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vb_hw5zkaHs</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8590-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SICxY5KZUYQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unscrew and Remove the Valve Cap — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>After removing the cover, you will see the valve inside its housing. To access the internal mechanism, you need to remove the large, round cap on top. This is typically a screw-on cap. Use a tool like an Allen wrench, pry bar, or large pliers to fit into the notches on the cap and turn it counter-clockwise to unscrew and remove it. As you take the cap off, pay attention to the rubber O-ring underneath, as it must be in good condition and replaced properly for a good seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SICxY5KZUYQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8590-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7dHBtuyN4CM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Float and Valve Cap — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Squeeze the two arms on the black float assembly together and lift it straight up to remove it from the valve body. Next, grasp the main valve cap and turn it approximately one-eighth of a turn counter-clockwise. Lift the cap off to expose the inside of the valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7dHBtuyN4CM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8593-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LHg2XC3xhIg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Test — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>With the faucet fully reassembled, go back and turn the water supply back on. It&apos;s best to do this slowly to avoid a sudden rush of pressure. Return to the sink and check for any leaks around the handle you just repaired. Turn the faucet handle on and off several times to confirm that the dripping has stopped and it is functioning properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LHg2XC3xhIg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8593-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eHsFVR0Z6wY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>With the faucet fully reassembled, slowly turn the main water supply back on. Turn the shower handle on and test its operation. Check for any leaks around the handle and escutcheon plate. Verify that the hot water comes on when turned to the left and cold water to the right. If the positions are reversed, you must shut the water off again, disassemble, and rotate the cartridge 180 degrees.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eHsFVR0Z6wY</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8593-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rqOd6P81qw4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Fix a Leaky Single-Handle Kitchen Faucet (Ball-Valve Type)</video:title>
      <video:description>Before fully reassembling the faucet, briefly turn the water supply valves back on to test the repair. Operate the faucet using the exposed stem and check carefully for any drips around the base. If the leak has stopped, turn the water supply off again to complete the reassembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rqOd6P81qw4</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8387-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hqp_v4IAqOU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Drain Pipes — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Begin by preparing the area for disassembly. Loosen the metal clamp on the dishwasher drain hose using a screwdriver and pull the hose off the garbage disposal&apos;s inlet port. Next, unscrew the plastic slip nuts that connect the PVC drain pipes to the disposal&apos;s discharge pipe and the adjacent sink drain. This will allow the plumbing to be moved out of the way. Have a bucket underneath to catch any residual water from the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hqp_v4IAqOU</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8387-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MBYTWxBuYSg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Workspace and Remove P-Trap — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>First, prepare for the disassembly by placing a bucket directly underneath the P-trap of the sink. This will catch any water and debris that will fall out when you open the drain. Unscrew the two slip nuts that connect the P-trap to the tailpiece and the wall pipe. These can usually be loosened by hand. Once loose, remove the P-trap and empty any contents into the bucket. To prevent unpleasant sewer gas from entering the room, stuff a paper towel into the open pipe in the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MBYTWxBuYSg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8387-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a_I0sZakc0o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old P-Trap — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Begin by placing a bowl or bucket directly under the existing P-trap to catch any water and debris that will spill out. If the slip nuts on the trap are too tight to turn by hand, use a pair of channel-lock pliers to gently loosen them. Once loose, finish unscrewing both the nut connecting to the sink&apos;s tailpiece and the nut connecting to the waste pipe by hand. Carefully pull the trap downwards to disconnect it and empty its contents into the bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a_I0sZakc0o</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8388-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ht86pHBOtw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install PVC Male Adapter — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Apply pipe joint compound to the threads of a new PVC male adapter. Carefully thread the adapter into the newly installed galvanized coupling. Hand-tighten it first, then use a pipe wrench to give it a final, snug turn. Be very careful not to overtighten, as this can easily crack the PVC fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ht86pHBOtw</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8388-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IqPHX0YR-xQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Glue and Install the New Assembly — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Once you have confirmed the fit, begin gluing the assembly. Apply PVC primer to the outside of the pipe and the inside of the fitting for each connection. Immediately follow with an even coat of PVC cement. Push the pipe and fitting together with a slight twisting motion and hold for 30 seconds to ensure a strong bond. Connect the entire new assembly to the existing irrigation lines. Tighten the union by hand, plus a quarter-turn with a wrench if needed, but do not over-tighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IqPHX0YR-xQ</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8388-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8J6sPue5IGs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect the Plastic Pipe Fitting — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Once the adapter is securely fastened to the lead pipe, the transition is complete. The other end of the union is now ready to be connected to the plastic pipe system. In the video, a plastic elbow fitting is shown being attached. For a permanent connection, this would typically involve applying the appropriate primer and solvent cement to both the pipe/fitting and the inside of the adapter&apos;s socket before pushing them together to create a solvent-welded joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8J6sPue5IGs</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8389-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qI0h1qdg5-0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Sanitary Tee Fitting — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Take a PVC sanitary tee fitting and apply PVC primer to the inside of the hub that will connect to the vertical pipe. Then, apply both primer and cement to the top end of the newly installed PVC pipe. Push the tee fitting firmly onto the pipe with a slight twisting motion to ensure a good bond. Finally, hand-tighten a threaded cleanout plug into the side port of the tee, using pliers for a final snug turn if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qI0h1qdg5-0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8389-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I18V5TzfesA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Horizontal Drain Line — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Prepare to connect the toilet drain to the main waste line. First, dry-fit a sanitary tee fitting. Once satisfied with the fit, apply PVC primer to the outside of the pipe end and the inside of the fitting. Immediately follow with a coat of PVC cement over the primed areas. Firmly push the pipe and fitting together, giving a quarter turn to spread the cement, and hold for about 30 seconds. After connecting the horizontal pipe, use a level to ensure it has the proper downward slope for drainage (typically 1/4 inch per foot).</video:description>
      <video:player_loc>https://www.youtube.com/embed/I18V5TzfesA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8389-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Tlcy9QV32o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert the Tee Fitting — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Take the pre-assembled PVC tee, which should already have short pipe stubs glued into the main horizontal ends with PVC primer and cement. Insert one end of the tee assembly into one of the flexible rubber couplings. Push the assembly fully into that coupling so it slides over the pipe stub. This creates the necessary clearance to maneuver the other end of the tee into alignment with the other section of existing pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Tlcy9QV32o</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8390-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MHTAy1I7RhQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Vanity Drain Lines — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>From the newly installed combi-y, run a new horizontal ABS drain pipe under the floor. Use a 90-degree elbow to direct the pipe vertically up into the wall cavity. In the wall, install a sanitary tee fitting on this vertical pipe. Then, extend two horizontal drain arms from the tee, one to the left and one to the right, to create the stub-outs for each of the two sinks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MHTAy1I7RhQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8390-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JL4XJsUWL1o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall P-Trap — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Finally, reinstall the P-trap. Connect the P-trap between the sink&apos;s tailpiece and the horizontal opening of the new tee fitting. Hand-tighten the slip nuts at both connection points to create a secure, water-tight seal. This completes the plumbing modification.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JL4XJsUWL1o</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8390-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IABtMYv1TxE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Lavatory Drain Arm — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Install the final drain connection for the lavatory (sink). At a point above the shower&apos;s P-trap, install a 2-inch sanitary tee into the vertical wet vent pipe. Attach a P-trap arm to the branch of the tee, which will stub out through the wall. This connection must be the most upstream (highest) fixture in the wet vent group. The pipe must remain 2 inches in diameter up to this point to properly serve as both a drain for the lavatory/shower and a vent for the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IABtMYv1TxE</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8391-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qI0h1qdg5-0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Sanitary Tee Fitting — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Take a PVC sanitary tee fitting and apply PVC primer to the inside of the hub that will connect to the vertical pipe. Then, apply both primer and cement to the top end of the newly installed PVC pipe. Push the tee fitting firmly onto the pipe with a slight twisting motion to ensure a good bond. Finally, hand-tighten a threaded cleanout plug into the side port of the tee, using pliers for a final snug turn if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qI0h1qdg5-0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8391-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fpbo_tFbF8k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime and Glue the Saddle Tee — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>First, dry-fit the saddle tee over the newly cut hole to confirm it fits properly. Once the fit is confirmed, remove the tee. Apply PVC primer to the surface of the pipe around the hole and to the corresponding inner surface of the saddle tee. The primer cleans and softens the plastic. Immediately after priming, apply a liberal, even coat of PVC cement to both primed surfaces. Work quickly as the cement sets fast.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fpbo_tFbF8k</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8391-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qIqPGm783SM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deburr, Clean, and Glue Adapters — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>For a strong, leak-proof connection, proper pipe preparation is crucial. Use a deburring tool to smooth the inside edge of each cut CPVC pipe. Lightly sand the outer surface of the pipe ends where the fittings will attach. Wipe the pipes clean with a rag. Apply a layer of CPVC cement to the outside of the pipe end and the inside of the transition fitting&apos;s slip connection. Push the fitting onto the pipe with a quarter turn to spread the cement and hold firmly for a few seconds. Wipe away excess cement. Repeat this for all three pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qIqPGm783SM</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8392-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jp519dp266Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Installation — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>After allowing the PVC cement a few minutes to cure, plug the sump pump&apos;s power cord back into the electrical outlet. The pump should activate and run a cycle. Observe the new check valve to ensure there are no leaks from the union fittings. Listen as the pump shuts off to confirm the new valve operates quietly, without the loud bang of the old valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jp519dp266Y</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8392-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/v2tq5Xe1AqI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cure and Check for Leaks — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Allow the PVC cement to fully cure. It is recommended to wait at least 2 hours before pressurizing the system. After the waiting period, slowly turn the main water supply back on. Thoroughly inspect all new joints and connections for any signs of dripping or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/v2tq5Xe1AqI</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8392-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FOV0kfW5IhI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>After allowing the solvent cement to cure for the time recommended by the manufacturer, slowly turn the main water supply back on. Open the newly installed ball valve and carefully inspect all connections – both the solvent welds and the threaded union seals – for any signs of dripping or leaks. Once confirmed to be watertight, the installation is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FOV0kfW5IhI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8393-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mM9wA0jp4Wk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deburr and Clean Pipe Ends — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Take a file or a similar deburring tool and smooth out the inside and outside edges of the newly cut pipe ends. Afterward, use a clean cloth to wipe away all the plastic shavings and any dirt from the ends of the pipes. This preparation is essential for creating a clean surface for the PVC cement to bond to.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mM9wA0jp4Wk</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8393-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BuAsWfqNFNQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pipe Cutting and Preparation — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>Measure and cut the damaged pipe using a hacksaw or PVC cutter, making sure to make accurate cuts so that new fittings and pipes can be installed correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BuAsWfqNFNQ</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8393-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r1_UEhNoUqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Pipe Ends — How to Install an Air Admittance Valve (AAV)</video:title>
      <video:description>After cutting, clean the end of the existing PVC pipe. Use a deburring tool or a utility knife to smooth the inside and outside edges of the cut. Then, use a piece of sandpaper or emery cloth to sand the outer surface of the pipe where the new fitting will be glued. This cleans the pipe and provides a better surface for the cement to bond to.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r1_UEhNoUqU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8385-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ebPcojMsL5I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Faucet — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Slowly turn the hot and cold water shut-off valves back on. Check all connections under the sink for any drips or leaks. Then, turn on the faucet and test both hot and cold water flow. Test the pull-out sprayer to ensure it functions correctly and retracts smoothly. If everything is working properly and there are no leaks, the installation is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ebPcojMsL5I</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8385-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dHFx-vBF3pg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Checks and Flushing — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>The final step is to check for leaks. Go under the sink and turn on both the hot and cold water shutoff valves. Carefully inspect all connections for any drips or leaks. Return to the top of the sink and, using the provided aerator key, remove the aerator from the spout. Turn on the hot and cold water and let them run for at least 15 seconds each to flush any debris from the lines. After flushing, turn the water off, then reinstall and tighten the aerator with the key.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dHFx-vBF3pg</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8385-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b263QXdkaLM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks and Functionality — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Return outside and test the newly installed faucet. Turn the handle to open the valve and check for a strong, steady stream of water. Check for any leaks around the faucet flange or from the interior connection. Turn the water off and ensure the valve closes completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b263QXdkaLM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8382-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_SPwxRhQhVg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Out the Damaged Section — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Using a pair of pipe cutters, make two clean, square cuts to completely remove the damaged section of the pipe. You may need to cut out a slightly larger section than just the leak to make room for the repair coupling. Ensure the cuts are as straight and clean as possible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_SPwxRhQhVg</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8382-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JOD9b0K7Q1A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cutting the Pipe Using the Guide — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Begin cutting the pipe with a hacksaw. Place the saw blade flush against the edge of the secured hose clamp, using it as a guide. Start sawing with slow, controlled strokes. The clamp will prevent the saw from wandering, helping you create a straight cut. As you cut deeper, you may need to change your angle or rotate the pipe if possible. If you encounter difficulty maneuvering the hacksaw due to limited space, switch to a smaller saw, such as a coping saw, which has a thinner blade and a smaller frame, making it easier to work in tight quarters.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JOD9b0K7Q1A</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8382-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4bojdmljD4Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Clean Copper Components — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Using a pipe cutter, cut the existing copper pipe. Then, thoroughly clean all components that will be soldered. Use emery cloth to sand the outside of the pipe coming from the wall and the outside of the small cut piece of pipe. Use a wire brush to clean the inside of the copper coupling and the inside of the male adapter. For small, hard-to-handle pieces, use channel-lock pliers to hold them securely while cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4bojdmljD4Y</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8380-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8apr54g8XGg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Main — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>The most critical preliminary step is to shut off the main water supply to the entire house. Locate your main water shut-off valve and turn it completely to the &apos;off&apos; position. This ensures no water will flow to the shower valve while you are working on it, preventing leaks and potential flooding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8apr54g8XGg</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8380-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EZGw52lJJVU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Depressurize — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>The first and most critical step is to shut off the water supply. Locate the main water shutoff for the house or the specific shutoffs for the bathroom and turn off both the hot and cold water lines leading to the shower valve. After the water is off, turn the shower handle to the fully open position to drain any remaining water and release all pressure from the system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EZGw52lJJVU</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8380-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Yb4xZmQ13c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Installation — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Before starting any work, prepare the area under the sink. Begin by shutting off the hot and cold water supply valves, typically by turning them clockwise. Place a bucket or container underneath the plumbing to catch any water that will drain from the lines. Open the existing faucet to release any pressure and drain the remaining water. Finally, use an adjustable wrench to disconnect the hot and cold water supply lines from the shutoff valves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Yb4xZmQ13c</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8381-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ut30zuuS_mM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Smooth Pipe Edges — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>After cutting the new pipe, use a piece of sandpaper to smooth the rough edges. Sand both the outside and inside of the cut end to remove any burrs. This process, known as deburring, ensures a snug fit into the rubber coupling and prevents debris from catching on the pipe&apos;s edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ut30zuuS_mM</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8381-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nhOCPkpv-OA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Deburr Pipe Ends — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>After cutting, the pipe ends will have rough edges. Use a piece of sandpaper (around 100-grit is suitable) or a deburring tool to smooth the inside and outside edges of both pipe ends. This removes any plastic burrs and creates a clean surface for the primer and cement to adhere to, which is essential for a leak-free connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nhOCPkpv-OA</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8381-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Qtg7eTvOz8c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspecting the Pipe End — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Before installing the fitting, it&apos;s crucial to prepare the pipe end. This step involves a close inspection of the cut end of a half-inch copper pipe to ensure it is perfectly clean and free from any sharp metal slivers, which are referred to as burrs. A smooth, clean pipe end is essential for the O-ring to seal correctly without being damaged.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Qtg7eTvOz8c</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8383-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I5kxToxiVC8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Make Final PEX Connection — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Make the final connection. Cut the PEX tubing to the correct length using a PEX pipe cutter, ensuring a square cut. Slide a compression sleeve onto the pipe. Use the PEX expansion tool to expand the end of the tubing. Push the expanded pipe onto the barbed fitting that was previously soldered to the copper line. Finally, use the compression side of the tool to draw the sleeve over the joint, completing the connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I5kxToxiVC8</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8383-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xr_8N3Ahxjs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach the PEX Pipe Section — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Cut an approximately 2-inch section of new PEX pipe using the pipe cutter. Push this PEX section firmly onto the skinnier, PEX-specific end of the now-installed adapter fitting until it is fully seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xr_8N3Ahxjs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8383-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QJ_Stx8tXys/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Valve and Crimp Ring — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Slide a new PEX crimp ring over the prepared end of the PEX tube. Then, push the barbed end of the new PEX shutoff valve into the tube until it is completely seated. You will feel a distinct resistance when it reaches the proper depth, indicating it is fully inserted over the internal barbs. Adjust the position of the crimp ring so that it is approximately 1/8th of an inch from the end of the tube. This precise placement ensures the ring is correctly located over the barbs of the valve for a secure crimp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QJ_Stx8tXys</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8384-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7kK8koJNILo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Pipe and Fitting — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Insert the prepared copper pipe into the push-fit fitting. Mark the pipe one inch from the end and ensure the pipe is inserted past the mark.  Give the pipe a slight twist to ensure a secure connection. The connection should be lock-solid and watertight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7kK8koJNILo</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8384-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IiprK9s3d08/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect the Fitting — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>With the copper pipe properly prepared, take the push-to-connect fitting. Align the fitting with the end of the pipe and push it on with firm, steady pressure. Continue pushing until the fitting is fully seated on the pipe, reaching the depth mark made in the previous step. You should feel it slide on smoothly and then stop firmly. This action engages the internal teeth and seats the O-ring to create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IiprK9s3d08</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8384-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LcG3ifHZKjM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Using Push-to-Connect (SharkBite) Fittings on Plastic Pipe — How to Replace a Section of Galvanized </video:title>
      <video:description>Details the process for using a push-to-connect fitting with plastic tubing, such as PEX or CPVC. For these materials, the white plastic stiffener must be left inside the fitting to provide rigidity to the pipe end, which allows the O-ring to seal correctly. Use a depth gauge tool to mark the proper insertion depth on the plastic pipe. Insert the pipe into the fitting until the mark is flush with the fitting&apos;s collar. This ensures a secure and leak-free connection. The fitting can be used to join plastic pipe to copper pipe in the same manner.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LcG3ifHZKjM</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8386-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EdqlV8gBSRM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect PEX to shower valve — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Measure and cut a PEX pipe according to the height of the shower area. Install a conversion fitting to the pex pipe. Place the crimp ring into the fitting. Crimp the ring using a crimping tool.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EdqlV8gBSRM</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8386-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3XzkFnDjfY4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut PEX Tube — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>To begin, use a PEX cutting tool to cut the PEX tubing as close to the brass fitting as possible. The goal is to leave very little tubing extending past the crimp ring. This provides clear access for the ring removal tool in the next step. If you cut it too long initially, you can shave off small pieces until it is nearly flush with the ring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3XzkFnDjfY4</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8386-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KwnVbQuf4t8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut PEX Tube — How to Replace a Section of Galvanized Pipe with PEX</video:title>
      <video:description>Using a PEX tube cutter, cut the blue PEX tube as close to the brass fitting as possible. You may need to hold the fitting steady with a pair of pliers while you make the cut. The goal is to remove the long section of tubing, leaving only a small piece inside the fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KwnVbQuf4t8</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8377-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ak3aeLZ66o8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Analyze the Stem and Cartridge Details — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>With the handle removed, closely examine the valve stem or cartridge. Note any unique features, such as the color or shape of the cartridge. Count the number of splines (the ridges on top of the stem) and measure the stem&apos;s length and diameter. These specific details are crucial for matching the part to a specific brand and model, either online or at a hardware store.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ak3aeLZ66o8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8379-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EqPKzaVW_l4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Inspect New Cartridge — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>Before installing the new part, take the new replacement cartridge and visually compare it to the old one to confirm it&apos;s an exact match. Check that the two rubber O-rings are present and properly seated on the new cartridge body. Examine the plastic clip on the stem; its orientation determines the direction the handle turns for hot or cold water. Ensure it is set to match the side you are replacing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EqPKzaVW_l4</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8379-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nDXWUi-DNBE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Leak and Identify Brand — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>First, confirm that the shower faucet is dripping even when the handle is in the fully &apos;off&apos; position. This indicates a likely problem with the internal cartridge. Next, carefully inspect the faucet&apos;s trim plate (escutcheon) to find the manufacturer&apos;s brand name. In the video, &apos;American Standard&apos; is clearly printed on the plate. This information is critical for purchasing the correct replacement cartridge and any other necessary parts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nDXWUi-DNBE</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8379-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bAl-3LlhNk4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Comparison and Confirmation — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>To conclude the demonstration, the newly assembled valve body with the cartridge installed is held up next to the original valve in the wall. This visual comparison confirms that the components and assembly process are identical, reinforcing that the steps shown can be directly applied to the repair of the in-wall shower valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bAl-3LlhNk4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8374-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QiJt4YPU_o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>Before beginning any plumbing work, locate the water supply shut-off valves. This is typically behind an access panel on the wall behind the shower. Open the access panel and turn both the hot (usually red handle) and cold water valves to the off position. The handles should be perpendicular to the pipes when off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QiJt4YPU_o</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8374-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EdqlV8gBSRM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>Turn off the water supply to the shower. This is typically done by locating the shut-off valves for the shower, which may be located near the shower itself or in a central plumbing access panel.  The valves should be turned clockwise to close and stop the flow of water. The presenter points out the hot and cold supply lines and the shower control valve in a cutaway wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EdqlV8gBSRM</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8374-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z_tJut6-l4c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Access — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>Begin by shutting off the main water supply to the house. Open a faucet at the lowest point of the home to drain as much water as possible from the pipes. If there isn&apos;t an existing access panel behind the shower, use a utility knife to carefully cut an opening in the drywall to expose the shower valve and plumbing. Finally, open any local shut-off valves for the shower and catch the remaining water in a bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z_tJut6-l4c</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8375-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ak3aeLZ66o8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Analyze the Stem and Cartridge Details — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>With the handle removed, closely examine the valve stem or cartridge. Note any unique features, such as the color or shape of the cartridge. Count the number of splines (the ridges on top of the stem) and measure the stem&apos;s length and diameter. These specific details are crucial for matching the part to a specific brand and model, either online or at a hardware store.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ak3aeLZ66o8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8375-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2gpLd0UVMog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove and Inspect the Old Cartridge — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>As a final method, remove the old cartridge for inspection. First, turn off the main water supply to the shower. Use a hex wrench to loosen the set screw on the faucet handle and remove the handle. Slide off any sleeves or covers. Use pliers to carefully pull out the cartridge retaining clip. You may need to turn a bonnet cap counter-clockwise to release the cartridge. Once removed, inspect the cartridge for any serial numbers. It&apos;s recommended to take the old cartridge to a plumbing store for a precise match. Measuring it with a caliper and taking a photo can also be helpful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2gpLd0UVMog</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8376-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ghgmldlJKjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen Set Screw and Remove Handle — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>If the handle itself is loose on the stem, locate the set screw, which is typically on the back of the handle. Use the correct size Allen wrench to turn the screw counter-clockwise. You only need to loosen it enough to lift the handle off; you do not need to remove the screw completely. After loosening, pull the handle straight up and off the splined valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ghgmldlJKjU</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8376-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bnCn5MCF9s8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>Remove the single lever handle from the faucet. This may require first prying off a decorative button to access a set screw. Use an Allen wrench to turn the set screw counter-clockwise until it is loose enough to lift the handle straight up and off the faucet stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bnCn5MCF9s8</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8376-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1J8XOuxr_sI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Faucet Handle — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>Using a small flathead screwdriver, carefully pry off the decorative cover from the center of the hot water handle to expose the screw underneath. Next, use a Phillips head screwdriver to turn the screw counter-clockwise until it is loose enough to be removed. Once the screw is out, pull the handle straight up to remove it from the valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1J8XOuxr_sI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8378-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tli0c3Z3OmM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Cap and Escutcheon Plate — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>After the handle is off, remove the decorative trim pieces. Unscrew the chrome cap covering the center of the valve. Next, use a Phillips head screwdriver to remove the two screws holding the main escutcheon plate to the wall. Carefully pull the plate away.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tli0c3Z3OmM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8378-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0dX5F5_MOCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet Trim — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>Begin by prying off the decorative cap from the center of the old clear acrylic knob using a flathead screwdriver. With the cap removed, use a Phillips head screwdriver to loosen and remove the screw holding the knob in place. Pull the knob off. Next, pull the chrome sleeve straight off the valve. Finally, unscrew the two long mounting screws holding the chrome faceplate (escutcheon) to the wall. If the plate is stuck, you may need to carefully cut the old caulk around it. Remove the faceplate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0dX5F5_MOCw</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8378-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0amnTW4t1CQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Handle and Escutcheon Plate — How to Identify Your Shower Valve for Replacement Parts</video:title>
      <video:description>Using an Allen wrench, loosen the set screw located on the underside or side of the shower handle. Once loose, pull the handle straight off the valve stem. Next, use a Phillips head screwdriver to remove the two screws securing the escutcheon plate (the large, round cover plate) to the wall. Carefully remove the plate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0amnTW4t1CQ</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8368-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x4x1BN9XddM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access and Remove the Old Valve Body — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>To remove the old valve, you will need to access it from behind the wall. This may involve cutting an access panel in the drywall on the other side of the shower wall. Once you have access, use two pipe wrenches or adjustable wrenches—one to hold the water pipe steady and the other to loosen the union nuts connecting the hot and cold water lines to the valve body. After disconnecting the water lines and the pipes leading to the shower head and tub spout, the old valve can be removed from the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x4x1BN9XddM</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8368-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7cpl_qs5heI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Plumb New Valve — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>With the old valve removed, position the new pressure-balance valve in the opening. Dry-fit new sections of copper pipe and fittings to connect the new valve to the existing hot supply, cold supply, shower head pipe, and the tub spout pipe. Ensure all pipes are cut to the correct length and the valve body is centered in the wall opening. Clean all copper pipe ends and fittings and apply flux in preparation for soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7cpl_qs5heI</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8368-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9-O2bfxka8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fitting the Valve and Pipes — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>With the valve body, first attach the black plaster ground using the two escutcheon screws. This piece helps position the valve correctly within the wall. Determine if you have a thick or thin wall, as this affects valve placement. The center of the valve should be 32 inches from the floor of the tub. Begin by connecting the valve to the tub drop outlet pipe. Measure the distance, cut a piece of 1/2&apos; copper tubing to length, and dry fit it using a copper coupling. Repeat this process for the hot water inlet, cold water inlet, and the shower riser outlet, using slip couplings for easier alignment. This dry-fitting stage ensures all pipes are the correct length and angle before soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9-O2bfxka8A</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8369-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fh-vSc-CIMA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Escutcheon Plate — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>After removing the handle, pull the handle adapter sleeve straight off. Next, use a Phillips head screwdriver to remove the two screws holding the large, circular escutcheon plate against the tile. Carefully pull the plate off the valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fh-vSc-CIMA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8369-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e5ISIynFKzs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Debris Around Valve — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Carefully chip away any excess concrete or mortar around the valve body. This is necessary to create enough clearance to work and to fit a saw blade behind the stud. Use a screwdriver to gently pry and break away loose pieces, being careful not to damage the tile or the valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e5ISIynFKzs</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8369-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x4x1BN9XddM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access and Remove the Old Valve Body — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>To remove the old valve, you will need to access it from behind the wall. This may involve cutting an access panel in the drywall on the other side of the shower wall. Once you have access, use two pipe wrenches or adjustable wrenches—one to hold the water pipe steady and the other to loosen the union nuts connecting the hot and cold water lines to the valve body. After disconnecting the water lines and the pipes leading to the shower head and tub spout, the old valve can be removed from the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x4x1BN9XddM</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8370-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SvyWnqoPJyU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pressure Test System — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Before closing the wall, it is critical to test the new plumbing for leaks. Temporarily cap the shower riser port. Attach a pressure testing gauge, such as a SharkBite push-to-connect hose adapter with a gauge, to the end of the copper tub spout pipe. Turn on the water supply at the new shut-off valves and pressurize the system. Check all solder joints and crimp connections for any signs of leaks. Leave the system under pressure for a period of time (as required by local code) to ensure it is watertight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SvyWnqoPJyU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8370-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bNNX4Zkcy3M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Shower Valve — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Secure the main shower valve body to a 2x4 wood brace positioned between the wall studs. Confirm the valve is oriented correctly with the &apos;UP&apos; marking facing the ceiling. This standard orientation places the hot water inlet on the left and the cold water inlet on the right. The valve&apos;s position must be set so its front face will extend correctly past the future finished wall surface, which includes the backer board and tile. You can use the manufacturer&apos;s protective plastic cover or a depth gauge to accurately determine this placement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bNNX4Zkcy3M</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8370-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QiJt4YPU_o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Before the final assembly, test the repair. Re-install the bonnet nut, then the outer sleeve, and temporarily place the handle on the stem to close the valve. Go to the access panel and turn both water supply valves back on. Use a flashlight to check for any leaks around the plumbing in the access panel and around the valve in the shower. Turn the shower on to verify that the hot and cold water now correspond correctly to the handle positions. Let it run for 5-10 minutes to ensure no leaks develop under pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QiJt4YPU_o</video:player_loc>
      <video:duration>112</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8371-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YksuwpRH0qA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Seal — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Turn on the shower to test the new installation. Check all functions of the handheld shower head. Once confirmed everything is working correctly and there are no leaks, apply a bead of silicone caulk around the top and sides of the escutcheon plate where it meets the tile wall. Do not caulk the bottom edge to allow any moisture that gets behind the plate to drain out. Use a wet sponge to smooth the caulk bead for a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YksuwpRH0qA</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8371-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4bojdmljD4Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Caulk — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Turn on the water and test the new installation. Check for any leaks around the base of the spout. Pull the diverter knob to send water to the showerhead and ensure it functions correctly without leaking. Once the test is successful, apply a bead of tub and tile caulk around the top and sides of the tub spout where it meets the wall to prevent water from getting behind it. Smooth the caulk bead for a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4bojdmljD4Y</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8371-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/evktxPjLjpI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Operation and Finalize — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Turn the main water supply back on. Test the new cartridge by turning the handle. The operation should now be smooth and easy. Check for any leaks around the handle or from the tub spout. As a final step, apply a neat bead of silicone caulk around the outer edge of the escutcheon plate to create a watertight seal against the shower wall, preventing water from getting behind the tile.</video:description>
      <video:player_loc>https://www.youtube.com/embed/evktxPjLjpI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8372-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/15vxtLIj5RM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder New Valve Assembly — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Using sandpaper or emery cloth, thoroughly clean the ends of the copper pipes and the inside of the fittings. Apply a thin layer of lead-free tinning flux to all surfaces that will be joined. To protect the internal seals of the new valves from heat, wrap them with a wet cloth and ensure the valve is in the open position. Use a propane torch to heat the joint evenly. Once hot enough, touch the lead-free solder to the joint, allowing it to be drawn into the gap and create a seal. Solder the final connection that attaches the new assembly to the pipe inside the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/15vxtLIj5RM</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8372-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nZkVAvXtnuo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the New Fitting — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Apply a thin, even layer of flux paste to both the cleaned outer surface of the pipe and the inner surface of the new copper male threaded adapter. Slide the adapter onto the pipe. Using a propane torch, heat the base of the fitting, not the pipe itself. Once the fitting is hot enough that the flux sizzles, touch the lead-free solder to the joint seam. Capillary action will draw the molten solder into the joint, creating a watertight seal. Wipe away any excess solder with a damp cloth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nZkVAvXtnuo</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8372-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A4tBner8PCY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Pipe and Fitting — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>With the components fluxed and assembled, the plumber proceeds to solder the joint. The pipe assembly is held securely with a pair of pliers. A propane torch is used to heat the fitting evenly. Once the copper is hot enough, which is indicated by the flux smoking and bubbling, lead-free solder is touched to the joint. The heat from the copper melts the solder, and capillary action pulls it into the gap between the pipe and fitting, creating a permanent, watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A4tBner8PCY</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8373-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eAZ3lEmW__4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Pipe for Capping — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>To ensure a strong, leak-proof seal, the end of the cut copper pipe must be properly prepared. A deburring tool is used to smooth the sharp inner edge left by the cutter. Following this, a piece of emery cloth is used to thoroughly sand the outer surface of the pipe end until it is clean and shiny, removing any oxidation or impurities.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eAZ3lEmW__4</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8373-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R39hMg9r_P0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Deburr Copper Pipe — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>The end of the existing copper pipe must be perfectly clean for the new fitting. A deburring tool is used to clean the old solder and oxidation from the outer surface of the pipe. The tool is placed over the pipe and rotated to scrape the surface clean. This step is critical for ensuring a watertight seal with the new ProPress fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R39hMg9r_P0</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8373-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DHHwMntWtoM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Deburr Copper Pipe — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>To begin, prepare the copper pipe for the connection. Use a pipe cleaning tool to scrub the exterior of the pipe&apos;s end until it is clean and shiny. This removes any oxidation or debris that could interfere with the seal. Next, take a deburring tool and insert it into the open end of the copper pipe. Twist the tool to smooth out any sharp edges or burrs left from cutting. This step is critical to prevent damage to the rubber seal inside the press fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DHHwMntWtoM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8367-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eCEOj5R0Rhs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Shut Off Water — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Begin by preparing the work area. Place a bucket and a rag under the P-trap to catch any water spills. Locate the hot and cold water shut-off valves under the sink and turn them clockwise to shut off the water supply completely. Turn on the faucet to drain any remaining water and relieve pressure in the lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eCEOj5R0Rhs</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8367-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Yb4xZmQ13c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Installation — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Before starting any work, prepare the area under the sink. Begin by shutting off the hot and cold water supply valves, typically by turning them clockwise. Place a bucket or container underneath the plumbing to catch any water that will drain from the lines. Open the existing faucet to release any pressure and drain the remaining water. Finally, use an adjustable wrench to disconnect the hot and cold water supply lines from the shutoff valves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Yb4xZmQ13c</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8367-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/D01nuMq-Lc4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — How to Install a Two-Handle Shower Valve</video:title>
      <video:description>Before starting, prepare the area under the sink. Place a drop cloth on the floor in front of the cabinet to protect it from spills. Then, place a shallow pan or bucket directly underneath the P-trap to catch any water that will spill out when it&apos;s removed. Finally, put on a pair of vinyl or rubber gloves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/D01nuMq-Lc4</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8365-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qdr4I4kTik0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Final Torque with Wrench — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Once the puller is hand-tight and the initial tension is set, use a wrench on the hex nut of the puller&apos;s screw mechanism. Turn the wrench steadily to apply greater torque. This will generate enough force to slide the compressed olive completely off the end of the copper pipe. You will feel a release of tension when the olive breaks free.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qdr4I4kTik0</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8365-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pPmVW_Jiywc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Fitting — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Use two large pipe wrenches to break the seal on the old pipe fitting. Position one wrench on the main pipe to hold it steady and prevent it from turning. Place the second wrench on the fitting you need to remove. Apply force in a counter-clockwise direction to loosen the fitting. Once it&apos;s loose, you can unscrew it the rest of the way by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pPmVW_Jiywc</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8365-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JxnPw6tWszA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Retaining Nut — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Insert the long ends of the Allen wrenches into two opposing slots on the black retaining nut. Grasping the locking pliers, apply rotational force clockwise to tighten the nut. Push on one plier while pulling on the other to create the necessary torque. Continue until the nut is snug and the faucet base feels secure. Do not overtighten, as the nut is plastic and could be damaged.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JxnPw6tWszA</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8361-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JeZwva0XYKU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Prepare for Removal — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Before starting any work, locate the hot and cold water shut-off valves under the sink and turn them clockwise until they are fully closed. Place a bucket directly underneath the P-trap to catch any water that will drain out. Unscrew the slip nuts on the P-trap by hand and disconnect it, allowing the water from the trap and drain to empty into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JeZwva0XYKU</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8361-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ajz8bqVxq8Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Repair — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Before working on the faucet, locate the hot and cold water supply shutoff valves under the sink. Turn both valve handles clockwise until they are fully closed. Place a towel on the cabinet floor beneath the plumbing to absorb any water that may spill during the repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ajz8bqVxq8Q</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8361-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XooTBDWjUgk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Work Area — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>To begin the repair, you must first shut off the water supply to the sink. Locate the shut-off valves, typically under the sink, and turn them to the off position. For easier access to the plumbing, it is recommended to remove the cabinet doors. Use a screwdriver to release the hinges and carefully set the doors aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XooTBDWjUgk</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8362-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FcbsZvqCwq0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demonstrate Wrench Functionality — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>The presenter demonstrates how the toothed, pivoting head of the basin wrench is positioned to grip the nut on the end of a water supply line. He shows that by turning the T-handle at the other end of the long shaft, the head clamps down and rotates the nut, allowing it to be loosened or tightened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FcbsZvqCwq0</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8362-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gZCAibNunRg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen Faucet Nuts with Basin Wrench — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>After the supply lines are detached, the mounting nuts holding the faucet are exposed. The presenter demonstrates how to use the basin wrench: position its head straight up to reach the nut, then slide the jaw over the nut. The spring-loaded jaw clamps onto the nut when you apply turning force to the handle. This allows you to grip the nut securely and turn the handle to break it loose, enabling the removal of the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gZCAibNunRg</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8362-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IYEIO8_PDhA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen the Spout Mounting Nut — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Go underneath the sink to access the faucet&apos;s mounting hardware. Identify the large nut that secures the base of the spout to the countertop. Position the jaws of the basin wrench around this nut. Turn the wrench handle counter-clockwise to loosen the nut. You only need to loosen it enough for the spout to be moved from above; do not remove it completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IYEIO8_PDhA</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8363-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XfC2IfiWKOA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Faucet Body — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Take the new faucet assembly and carefully feed the attached hoses and wires down through the mounting hole in the countertop. Ensure the faucet base is seated correctly on the countertop surface. From underneath the sink, slide the plastic mounting bracket up over the hoses and onto the faucet&apos;s threaded shank. Follow this with the large brass mounting nut, threading it onto the shank by hand. Use the included plastic tightening tool to fully tighten the nut, securing the faucet assembly. Check the faucet&apos;s alignment from above to ensure it is straight. Finally, use a Phillips head screwdriver to tighten the two screws on the mounting bracket, which will clamp it against the underside of the counter and prevent the faucet from rotating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XfC2IfiWKOA</video:player_loc>
      <video:duration>104</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8363-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lnXq02dznPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Assembly and Tighten Head Nut — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Carefully guide the newly rebuilt operating rod assembly back into the faucet body. Be gentle to ensure the head gasket seats correctly and isn&apos;t pinched or damaged. Hand-thread the head nut onto the faucet body. Remember, these are left-hand threads, so turn counter-clockwise to tighten. Once hand-tight, use wrenches to snug it down firmly, but do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lnXq02dznPM</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8363-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RnAk0J0u15M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Faucet Components — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Prepare the faucet for installation. First, take the threaded pipe and screw it into the base of the faucet body by hand until it is snug. Next, identify the hot and cold waterlines (often marked with red and blue indicators). Insert the connector ends of the waterlines into their respective ports at the base of the faucet. They should click or slide securely into place. The hot line typically connects to the left port and the cold to the right. Finally, place the O-ring over the threaded pipe and ensure it is seated firmly in the groove at the very bottom of the faucet base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RnAk0J0u15M</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8364-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EqPKzaVW_l4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unscrew Headgear Nut — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>With the handle removed, use an adjustable wrench to loosen the large chrome nut, known as the headgear nut, which secures the cartridge in the faucet body. Position the wrench jaws around the nut and turn it counter-clockwise (to the left). Once loosened, you can typically finish unscrewing it by hand. If the nut is seized, apply a penetrating oil and allow it to soak for ten minutes before attempting again.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EqPKzaVW_l4</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8364-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-St7cDmwj38/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Leverage to Remove Plug (Tip #3) — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>After allowing the penetrating oil to soak, use a pipe wrench that fits snugly on the square nut of the plug. Slide a long steel pipe, or breaker bar, over the handle of the wrench. This provides significant extra leverage. Apply firm, steady pressure to the breaker bar to turn the wrench and break the plug free. The combination of heat, penetrating oil, and leverage proves successful in removing the stuck plug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-St7cDmwj38</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8364-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h98kGrNxVFw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tap Stem and Final Attempt — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>After the penetrating oil has had sufficient time to work, use a wrench to gently tap the valve stem a few times. This vibration can help break the final bond of the corrosion. Following the taps, try again to work the valve handle back and forth until it moves freely. Once successful, reassemble and tighten the packing nut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h98kGrNxVFw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8366-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/P3fzIfM98CQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Faucet — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Once the broken piece is removed, take your new faucet. Ensure the threads are clean and free of debris. Screw the new faucet into the wall fitting clockwise by hand until it is snug. If necessary, use a wrench for a final quarter-turn to ensure it&apos;s secure, but be careful not to over-tighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/P3fzIfM98CQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8366-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F4SKwTKdzMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Retaining Nut and Test for Leaks — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>Place the cartridge back into the faucet body, making sure the two small locating pins on the bottom of the cartridge line up with the holes in the faucet base. Thread the brass retaining nut back on and tighten it by hand until it is finger-tight. Then, using channel-lock pliers, give the nut a small additional turn (about an eighth of a turn) to make it snug. Slowly turn the water supply back on to check if the leak has stopped before reassembling completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F4SKwTKdzMY</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8366-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LG9WhHTZyCE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Tightening and Alignment — How to Use a Basin Wrench Like a Pro</video:title>
      <video:description>To complete the installation, use two adjustable wrenches. Place one wrench on the main faucet inlet nut to hold it stationary. Use the second wrench to fully tighten the water line adapter. This two-wrench technique prevents the faucet from twisting and ensures a secure, leak-proof connection. Before applying the final torque, check the faucet from the front to confirm it is straight and level, and adjust if necessary. Repeat for both adapters.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LG9WhHTZyCE</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8359-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dK03eueyiTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Repair Flange — How to Remove an Old Toilet Flange</video:title>
      <video:description>The modified repair flange is installed over the old PVC pipe stub. In the video, the ring was cut into two pieces to fit properly. The pieces are positioned around the pipe and then secured to the subfloor by driving screws through the pre-drilled holes in the ring into the floor. This creates a stable and secure base for the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dK03eueyiTk</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8359-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l-GXXNKc1BM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Flanges — How to Remove an Old Toilet Flange</video:title>
      <video:description>After cleaning the area, the plumber removes the old flanges. He uses a specialized pipe reaming tool attached to a drill to cut out the inner PVC flange from inside the waste pipe. Next, he uses a pry bar and hammer to break and chisel away the old, rusted metal flange rings. This process fully exposes the rotted subfloor underneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l-GXXNKc1BM</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8359-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xd871gxEre4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Flange and Install Wax Ring — How to Remove an Old Toilet Flange</video:title>
      <video:description>Once the flange is seated, the plumber uses a screwdriver to tighten the three screws located on the top of the flange. Tightening these screws expands the rubber gasket, compressing it against the inside of the cast iron pipe to create a strong, watertight seal. With the flange secured, he places a new wax ring over the flange in preparation for reinstalling the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xd871gxEre4</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8360-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Y5LA7zfokYU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cutting and Gluing PVC Pipe — How to Remove an Old Toilet Flange</video:title>
      <video:description>The user cuts a piece of PVC pipe to size using a ratcheting PVC cutter. He then dry-fits the drain line components and makes alignment marks with a pencil. He protects the sink surface with a cloth and begins gluing the pipes. He applies purple primer to both the pipe end and the inside of the fitting, followed by all-purpose cement. He pushes the pieces together firmly with a quarter turn to set the joint. He repeats this process for the entire drain line section.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Y5LA7zfokYU</video:player_loc>
      <video:duration>173</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8360-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pebIlA2Lyz8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Drain Pipe — How to Remove an Old Toilet Flange</video:title>
      <video:description>For better access, you may need to temporarily remove the garbage disposal. Using a reciprocating saw, carefully cut the vertical PVC drain pipe at the line you marked. Ensure the cut is as straight as possible. Clean any burrs or rough edges from the cut pipe to ensure a good surface for gluing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pebIlA2Lyz8</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8360-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Vg7_8WudkHs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Secure Drain Body — How to Remove an Old Toilet Flange</video:title>
      <video:description>Take the main drain body assembly and apply the appropriate solvent cement (for ABS or PVC) to the inside of the fitting and the outside of the cut drain pipe. Firmly press the drain body onto the pipe, ensuring its top flange sits level with the surrounding concrete floor. Once in place, secure the flange to the concrete using appropriate concrete screws inserted through the pre-drilled holes in the flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Vg7_8WudkHs</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8355-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BoFVATIz190/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Modify Floor and Install Flange Extender — How to Remove an Old Toilet Flange</video:title>
      <video:description>To accommodate the new flange extender, use an oscillating multi-tool to carefully cut and widen the opening in the wood floor around the drain. After cutting, use a shop vacuum to remove all sawdust and debris. Place the flange extender into the opening, ensuring it sits level and slightly above the finished floor. Secure it firmly to the subfloor with long screws using a power drill.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BoFVATIz190</video:player_loc>
      <video:duration>86</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8355-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZAaW0-05o58/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Tub Flange to Studs — How to Remove an Old Toilet Flange</video:title>
      <video:description>Identify and remove any incorrect fasteners, such as drywall screws, that were used to attach the bathtub flange to the wall studs. Use a power drill or impact driver for removal. Then, use a step drill bit to create a countersunk hole in the acrylic flange at the screw location. This allows the new screw head to sit flush. Finally, drive a corrosion-resistant screw, such as a U2 fastener, through the flange and securely into the wood stud.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZAaW0-05o58</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8355-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xKL3FHh1GZo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Anchor Drain Body — How to Remove an Old Toilet Flange</video:title>
      <video:description>Place the main drain body flange into the hole cut in the subfloor. Using an impact driver and the provided screws, securely fasten the flange to the subfloor. Drive screws into all available mounting holes to ensure the drain body is firmly anchored and will not move.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xKL3FHh1GZo</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8354-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IqeoINJfrFU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Tank — How to Remove an Old Toilet Flange</video:title>
      <video:description>Begin by turning off the water supply to the toilet. The shut-off valve is typically located on the wall behind or next to the toilet. Turn the valve clockwise until it stops. Next, flush the toilet and hold the flush lever down to drain as much water as possible from the tank. Place a sponge or towel on the floor below the connections to catch any remaining water drips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IqeoINJfrFU</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8354-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rwyLPWaxO_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — How to Remove an Old Toilet Flange</video:title>
      <video:description>Locate the water supply shut-off valve, typically on the wall behind the toilet, and turn it clockwise to stop the water flow. Remove the tank lid and place it in a safe spot. Flush the toilet and hold the handle down to drain as much water as possible from the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rwyLPWaxO_E</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8354-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lPY0TQoRreA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water and Drain Tank — How to Remove an Old Toilet Flange</video:title>
      <video:description>Begin by turning off the water supply to the toilet. The shut-off valve is typically located on the wall behind the toilet. Turn the knob clockwise until it stops. Once the water is off, remove the heavy porcelain lid from the toilet tank and carefully set it aside on a protected surface. Then, press and hold the flush handle to drain as much water as possible from the tank. You will need to hold the handle down until the flapper at the bottom of the tank closes and the water has emptied.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lPY0TQoRreA</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8356-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z0e4bM3ptgM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Leverage and Remove Steel Pipe — How to Remove an Old Toilet Flange</video:title>
      <video:description>After removing about half of the lead, a ball-peen hammer is inserted head-first into the steel pipe to be used as a lever. By twisting and pulling on the hammer handle, the remaining seal is broken, and the pipe begins to turn. Another hammer is briefly used to tap the first hammer, likely to seat it more firmly. With sustained twisting force, the steel pipe is finally freed and pulled out of the cast iron hub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z0e4bM3ptgM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8356-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E3ccc5Uir_0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety — How to Remove an Old Toilet Flange</video:title>
      <video:description>Begin by identifying the cast iron hubs that need to be removed. Gather all necessary tools and safety equipment. This includes an acetylene torch, a flathead screwdriver for picking out the lead, a hammer, channel-lock pliers, and safety glasses. Critically, if working on a vertical pipe stack, stuff a rag down into the pipe below the joint to catch any falling debris or molten lead, which could cause a serious blockage. It is also wise to have a fire extinguisher and a spray bottle of water on hand for safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E3ccc5Uir_0</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8356-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AIrQXU00N9s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Drain Pipe — How to Remove an Old Toilet Flange</video:title>
      <video:description>After removing the old flange, clean the inside of the cast iron drain pipe. Use a grinding wheel or a flap disc on the angle grinder to smooth any rough edges on the inside of the pipe where the new flange will seal. Vacuum out all debris from the pipe and the surrounding area. Stuff a clean rag back into the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AIrQXU00N9s</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8357-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nVok2dWGJSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Flange and Clean Old Wax — How to Remove an Old Toilet Flange</video:title>
      <video:description>After removing the toilet, inspect the flange and drain. The video shows standing water in the drain pipe, indicating a clog. The old wax seal failed to adhere to the toilet, which caused the leak. Use a putty knife to scrape the old, dirty wax ring off the flange and floor. Also remove any old caulk from around the toilet&apos;s footprint on the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nVok2dWGJSI</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8357-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QXqKN2CZfwU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Inspect Flange — How to Remove an Old Toilet Flange</video:title>
      <video:description>With the toilet removed, use a putty knife or scraper to completely remove the old, dirty wax ring from the toilet flange and the bottom of the toilet. Dispose of the old wax in a trash bag. Thoroughly inspect the flange for cracks, corrosion, and to confirm it is level and properly secured to the subfloor. In the video, the flange is identified as being crooked and improperly installed, which is the root cause of the leak.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QXqKN2CZfwU</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8357-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LiNJrnbJxns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Seal and Clean Flange — How to Remove an Old Toilet Flange</video:title>
      <video:description>After removing the toilet, you will see the floor flange and the old seal. The video shows a rubber seal, but typically you will find a wax ring. Scrape off all remnants of the old wax ring from the flange and the bottom of the toilet using a putty knife. Clean the area thoroughly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LiNJrnbJxns</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8358-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LiNJrnbJxns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain and Remove the Toilet — How to Remove an Old Toilet Flange</video:title>
      <video:description>With the water supply disconnected, flush the toilet to drain most of the water from the tank. Use a sponge or a wet/dry shop vacuum to remove any remaining water from both the tank and the bowl. Once the toilet is empty, carefully lift it straight up off the closet bolts and set it aside on a drop cloth or cardboard to protect the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LiNJrnbJxns</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8358-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dG8YJjNu78Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove the Tank — How to Remove an Old Toilet Flange</video:title>
      <video:description>Place a towel on the floor to catch any drips. Use an adjustable wrench to disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts underneath the bowl and use a wrench to loosen and remove the nuts. Once the bolts are loose, carefully lift the tank straight up and off the toilet bowl. Place the tank on a protected surface, such as a towel laid over the toilet seat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dG8YJjNu78Q</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8358-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8G-hBeTnVo8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Remove an Old Toilet Flange</video:title>
      <video:description>Place a small bucket or towel under the water supply line connection to catch any drips. Use a wrench to loosen and disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts under the rim of the toilet bowl. Use a wrench or socket to unscrew the nuts from these bolts. Once the nuts and washers are removed, carefully lift the toilet tank straight up and off the bowl. Place it on a protected surface like a towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8G-hBeTnVo8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8349-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bvTMUbXdKgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Power and Water — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>Before starting any work, ensure your safety by turning off the water supply to the water heater at the cold water inlet valve. Then, locate the corresponding circuit breaker in your electrical panel, often labeled &apos;WH&apos; for Water Heater, and switch it to the &apos;OFF&apos; position to cut all power to the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bvTMUbXdKgQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8349-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d6JCr3UcsCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Down Power and Water Supply — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>Begin by shutting down the water heater. For a gas-powered unit, turn the control knob to the &apos;pilot&apos; setting. For an electric water heater, locate the corresponding circuit breaker in your electrical panel and switch it to the &apos;off&apos; position. Next, find the cold water inlet valve, typically located above the water heater, and turn the handle to shut off the water supply to the tank. The cold water inlet is often marked with a &apos;C&apos; on the top of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d6JCr3UcsCw</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8349-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-IE8zZWU3Dc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Gas Supply — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>First, ensure the water heater is safe to work on. Turn the gas control knob on the water heater to the &apos;OFF&apos; position. Then, locate the main gas shut-off valve on the supply pipe leading to the heater and turn it to the off position. This isolates the unit from the gas supply.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-IE8zZWU3Dc</video:player_loc>
      <video:duration>100</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8353-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GkVS6MKu8iE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Hose and Drain the Tank — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>Attach a standard garden hose to the drain valve located at the bottom of the water heater tank. Run the other end of the hose to a nearby floor drain, outside, or into a bucket. Once the hose is secure, slowly open the drain valve to allow the water to begin flowing out of the tank. To speed up the draining process, you can go to a sink or tub in your house and open a hot water faucet; this allows air to enter the system and prevents a vacuum from forming. The video shows an optional technique of draining the water over a window screen to catch and visualize the amount of sediment being flushed out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GkVS6MKu8iE</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8353-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-pczofp6E1Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Drain the Water Heater — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>Begin by preparing the water heater for draining. Turn the gas control knob on the heater to the &apos;OFF&apos; position. Locate the cold water inlet pipe and shut off the water supply to the tank. Connect a standard garden hose to the existing drain valve at the bottom of the heater. Run the other end of the hose to a safe drainage area, such as a floor drain or outside. Open the drain valve and then open a hot water faucet somewhere in the house to allow air to enter the tank, which will break the vacuum and allow the water to drain out completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-pczofp6E1Y</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8353-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p15VXZkEFag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Partially Drain the Tank — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>Attach a garden hose to the drain valve at the bottom of the water heater tank. Route the other end of the hose to a suitable floor drain or a large bucket. Use a flathead screwdriver to turn the drain valve&apos;s screw counter-clockwise to open it. To help the water drain, go to a sink inside the house and open a hot water faucet; this will break the vacuum in the lines. Allow about a quarter of the tank&apos;s water to drain out, then close the drain valve by turning the screw clockwise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p15VXZkEFag</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8352-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pipZGJH_ifw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Heater — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>Attach a garden hose to the drain valve located at the bottom of the water heater. Run the other end of the hose to a location where the water can safely drain, such as outside or to a floor drain. Use a flathead screwdriver to open the drain valve. Allow the water heater to drain completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pipZGJH_ifw</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8352-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GorDyqjE9VQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Heater Tank — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>Place a bucket under the drain valve at the bottom of the water heater to catch any initial drips. If possible, connect a garden hose to the drain valve and run the other end to a floor drain or outside. Open the valve to allow all the water and sediment to drain out of the tank completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GorDyqjE9VQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8352-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NnmZBVC31AM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Hose and Drain the Tank — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>Attach a garden hose to the drain valve at the bottom of the water heater tank. Ensure the hose has a rubber gasket inside its fitting to create a good seal. Run the other end of the hose to your prepared filter bucket, which should be placed in a suitable drainage area like a driveway. It&apos;s recommended to leave the cold water supply valve to the heater open; this pressure helps push the sediment out more effectively. Using a flathead screwdriver, turn the screw on the drain valve a quarter turn until the slot is parallel with the valve, opening it fully. Let the water drain for 10-15 minutes, or until the water running out of the hose is clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NnmZBVC31AM</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8350-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SIBO-95yv2Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Power — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>With the new rod installed, recommission the water heater. Close the drain valve and remove the garden hose. Fully open the cold water supply valve to refill the tank. To bleed air from the system, open a hot water tap in the house until water flows out steadily. Once the tank is full, check for any leaks around the new anode rod. Finally, restore power by flipping the circuit breaker or relight the pilot light and turn the gas control knob back to your desired temperature setting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SIBO-95yv2Q</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8350-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Qd0y29EcCMI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>After confirming the tank is full and there are no leaks, you can safely restore power. Go to the water heater unit and flip the power switch back to the &apos;ON&apos; position. Then, go inside the RV and turn on the interior water heater switch. The water heater is now back in service and will begin heating the water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Qd0y29EcCMI</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8350-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x_RL-Ou-zmY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble, Refill, and Test — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>With both new elements installed, reattach both the upper and lower metal access panels securely. Turn the cold water supply valve back on fully. Go to a nearby sink or tub and open a hot water tap. Let it run until all the air is purged from the system and water flows in a steady, uninterrupted stream. This confirms the tank is full. Carefully inspect the new upper and lower elements for any leaks. Once you have confirmed there are no leaks and the tank is full, return to the electrical panel and switch the circuit breaker for the water heater back to the &apos;ON&apos; position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x_RL-Ou-zmY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8351-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sW_graOIMwk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Refill Tank and Purge Air — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>Close the drain valve at the bottom of the tank. Then, go to the closest faucet to the water heater and open the hot water tap completely. Return to the water heater and slowly turn the cold water supply valve back on. The tank will begin to fill, and you will hear air sputtering from the open faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sW_graOIMwk</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8351-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/17Klqwdg8pM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Refill Tank and Check for Leaks — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>With the new valve installed and in the closed position, turn the cold water supply back on to begin refilling the tank. Go to a faucet in the house and turn on the hot water side. Let it run until water flows out steadily, which indicates the tank is full and all air has been purged. Check the new drain valve for any signs of leaking. Once you confirm it is full and not leaking, you can reinstall the access panel and turn the electricity back on at the breaker.</video:description>
      <video:player_loc>https://www.youtube.com/embed/17Klqwdg8pM</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8351-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Suf9o2w5ilw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Power — How to Fix Low Water Pressure in Only the Hot Water Lines</video:title>
      <video:description>With the pressure relief valve closed, turn your water supply back on. Go back inside and open the hot water faucet again. Let it run until all the air sputters out and you have a steady stream of water. This confirms the water heater tank is full again. Once full, you can turn the water heater&apos;s power back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Suf9o2w5ilw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8346-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zMx19GBe-LM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Valve Stem — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Take the new valve stem from the remodeling kit. Ensure the new washer is properly seated. Insert the new stem into the valve body and hand-tighten it by turning it clockwise. Then, use the faucet stem socket wrench to snug it down firmly, but do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zMx19GBe-LM</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8346-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/06RYDO1SqzI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Valve Stem Washer — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Remove the valve stem. Take the stem to a home improvement store to find a replacement washer that matches. Install the new washer and reassemble the valve. Turn the water supply back on to check for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/06RYDO1SqzI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8346-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3i6T6uCuilw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Stem Assembly — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Take the new replacement stem assembly, which includes a new stem, washer, and O-ring. Insert the new stem into the valve body. Thread the packing nut back onto the valve body by hand to ensure it is properly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3i6T6uCuilw</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8342-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EqPKzaVW_l4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Before starting any work on the faucet, go under the sink and locate the two water supply shut-off valves, one for the hot water line and one for the cold. Turn both valve handles clockwise until they stop to completely shut off the water supply to the faucet. This is the most critical step to prevent water from spraying everywhere once you begin disassembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EqPKzaVW_l4</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8342-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dQzX_-Yl3XI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Before starting the repair, locate the hot and cold water shut-off valves typically found in the cabinet under the sink. Turn the handles of both valves fully clockwise until they stop. This will cut off the water supply to the faucet, preventing any water from flowing while you work.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dQzX_-Yl3XI</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8342-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N27dODS3iNw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off the Water Supply — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Before working on the pipes, locate the hot and cold water shutoff valves under the sink. Turn both valves clockwise until they are fully closed to stop the water flow to the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N27dODS3iNw</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8343-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nfTFngwM_pQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Begin disassembling the faucet by prying off the small decorative cap on the front of the handle with a small screwdriver. Then, use a Phillips screwdriver to loosen and remove the screw that secures the handle to the cartridge stem. Once the screw is out, pull the handle straight off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nfTFngwM_pQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8343-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1B7_fTnNNT8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Using a small flathead screwdriver or a pick, carefully pry off the decorative cap from the center of the faucet handle to expose the retaining screw. Next, use a Phillips head screwdriver to loosen and remove the screw. Once the screw is out, pull the handle straight off the valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1B7_fTnNNT8</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8343-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nUjzyS68Wx0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Valve Handle — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>First, carefully remove the decorative cap from the top of the handle. Use a thin, flat tool like a small knife or flathead screwdriver to gently pry it off. Be careful not to break the plastic clips. Once the cap is removed, you will see either a screw or just the top of the valve stem. If there is a screw, use a Phillips head screwdriver to remove it. If there is no screw, you can simply pull the handle straight up and off the valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nUjzyS68Wx0</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8345-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1CP0d4bp7gk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Bonnet Nut and Cartridge — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>With the handle and faceplate removed, use channel-lock pliers to grip the brass bonnet nut. Turn it counter-clockwise to loosen and remove it. Once the bonnet nut is off, you can grip the plastic cartridge assembly and wiggle it straight out of the valve body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1CP0d4bp7gk</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8345-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SlvE0QeRots/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Faucet and Remove Valve Stem — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>To fix a leak from the handle, first shut off the water. Then, remove the screw in the center of the handle and pull the handle off. Use an adjustable wrench to loosen and remove the packing nut. With the nut removed, you can now pull the entire long valve stem straight out of the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SlvE0QeRots</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8345-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JbobHlxWabU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Cartridge and Retaining Nut — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>With the handle removed, you will see a large, threaded retaining nut holding the cartridge in place. Use channel-lock pliers to grip this nut and turn it counter-clockwise to loosen and completely unscrew it. Once the nut is removed, grip the stem of the old cartridge and pull it straight up and out of the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JbobHlxWabU</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8344-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rqOd6P81qw4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Before fully reassembling the faucet, briefly turn the water supply valves back on to test the repair. Operate the faucet using the exposed stem and check carefully for any drips around the base. If the leak has stopped, turn the water supply off again to complete the reassembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rqOd6P81qw4</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8344-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lnXq02dznPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Handle and Test for Leaks — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Place the new handle onto the stem screw and secure it with the new screw using the Phillips head screwdriver. Turn the handle clockwise to fully close the faucet. Go back inside and turn the water supply valve back on. Return outside and test the faucet by turning it on and off, checking for any leaks around the handle, head nut, or spout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lnXq02dznPM</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8344-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eHsFVR0Z6wY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>With the faucet fully reassembled, slowly turn the main water supply back on. Turn the shower handle on and test its operation. Check for any leaks around the handle and escutcheon plate. Verify that the hot water comes on when turned to the left and cold water to the right. If the positions are reversed, you must shut the water off again, disassemble, and rotate the cartridge 180 degrees.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eHsFVR0Z6wY</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8347-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z4UqQwNY4dg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extract and Examine the Valve Stem — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>After unscrewing the valve assembly bonnet, pull the entire valve stem out from the spigot body. Examine the stem to see the damage. The host points out a significant bend in the stem and a crack in the brass valve body at the end, which were caused by the force of expanding ice. He also removes and shows the various O-rings and washers on the stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z4UqQwNY4dg</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8347-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SAz-1n_sTwM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace the Old O-Rings — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Inspect the base of the removed spout. You will see two black O-rings. Carefully remove the old, worn O-rings. If they are brittle or stuck, you can use a small flathead screwdriver or a pick to gently pry them off. After removing them, clean the spout base with a rag or tissue. Take the new O-rings, apply a small amount of plumber&apos;s grease to them, and slide them into the grooves on the spout base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SAz-1n_sTwM</video:player_loc>
      <video:duration>132</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8347-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3i6T6uCuilw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Stem Assembly — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Take the new replacement stem assembly, which includes a new stem, washer, and O-ring. Insert the new stem into the valve body. Thread the packing nut back onto the valve body by hand to ensure it is properly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3i6T6uCuilw</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8348-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EG-N-i00IXM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet and Test — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Reassemble the faucet in the reverse order of disassembly. Screw the retaining nut back on. Slide the decorative sleeve on, followed by the escutcheon plate, and secure it with the two screws. Place the handle on the stem, tighten the set screw with the Allen wrench, and screw the handle cap back on. Once fully assembled, turn the main water supply back on and test for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EG-N-i00IXM</video:player_loc>
      <video:duration>97</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8348-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sr0FJIIOFnw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Faucet — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>Begin reassembling the faucet in the reverse order of disassembly. Place the chrome sleeve back over the new cartridge. Position the escutcheon plate against the wall, aligning the screw holes, and secure it with the two long screws. Tighten the screws evenly, but do not overtighten. Place the white plastic temperature adapter onto the cartridge stem, followed by the main handle. Secure the handle with the center screw using the Phillips screwdriver. Finally, snap the decorative cap back into place on the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sr0FJIIOFnw</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8348-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/prPewpGo_3A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Stop a Dripping Two-Handle Faucet</video:title>
      <video:description>After cleaning and lubricating, reassemble the faucet in the reverse order of disassembly. Place the spout back onto the base, ensuring it is properly seated. Screw the bonnet cap back on, hand-tightening is usually sufficient. Place the handle back on top, aligning it with the valve stem, and tighten the set screw with the Allen wrench. Finally, press the decorative cap back into place on the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/prPewpGo_3A</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8325-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NjH-eCdk9Rs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Flush Valve and Clean Tank — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>With the tank removed, take off the large nut on the underside that secures the flush valve assembly. A large pipe wrench may be needed if it&apos;s corroded. Once the nut is off, the entire old flush valve assembly can be lifted out from inside the tank. Also, remove the old tank bolts and the large, grimy tank-to-bowl gasket. Clean the area around the flush valve opening and the bolt holes on the tank with a cleaner and paper towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NjH-eCdk9Rs</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8325-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_QrgeXAFTSM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Tank-to-Bowl Gasket — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>With the flush valve securely installed, take the new, thick tank-to-bowl gasket. Press the gasket firmly over the external retaining nut and the threaded portion of the flush valve. Ensure it is seated snugly against the bottom of the tank. The tank is now ready to be reinstalled on the toilet bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_QrgeXAFTSM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8325-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-mGMDU66cfQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Flush Valve — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Remove the old tank-to-bowl gasket. Use large pliers or a wrench to loosen the large lock nut on the underside of the tank that holds the flush valve in place. Once loosened, unscrew it by hand and remove the old flush valve assembly from inside the tank. Inspect the tank for cracks and thoroughly clean the bottom of the tank, especially around the flush valve hole.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-mGMDU66cfQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8322-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9oPX28EGr5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>First, turn off the water supply to the toilet and flush it to empty the tank. Use a sponge or towel to remove any remaining water. Disconnect the water supply line from the fill valve. Locate the two bolts underneath the tank that secure it to the bowl. Use a deep socket wrench (a 1/2 inch was used here) to unscrew the nuts from these bolts. Carefully lift the tank off the bowl and move it to a work area like a garage or workbench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9oPX28EGr5w</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8322-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TRYwjtrJ3vA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Tank and Old Parts — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Once the bolts are removed, carefully lift the toilet tank straight up and off the bowl. Be mindful that it might be heavier than it looks. Place the tank on a towel on the toilet seat or on the floor to work on it. This is a good time to clean the area on the bowl where the tank was sitting. Remove the old, large gasket from the bottom of the tank&apos;s flush valve outlet and pull out the old bolts from inside the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TRYwjtrJ3vA</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8322-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Of_Egq2pGBc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Toilet Tank — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Begin by preparing the toilet for disassembly. If you haven&apos;t already, turn off the water supply valve located behind the toilet. Flush the toilet to drain the tank, and use towels to soak up any remaining water. Disconnect the water supply line from the fill valve at the bottom of the tank. Using a screwdriver, loosen and remove the nuts from the bolts that secure the tank to the bowl. Once the nuts are off, carefully lift the tank straight up and away from the bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Of_Egq2pGBc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8321-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-SwWyZCeAjY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Toilet — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Begin by shutting off the water supply to the toilet. This is typically done by turning the shut-off valve located on the wall behind or next to the toilet. Turn the valve clockwise until it stops. After the water is off, remove the ceramic tank lid and set it aside carefully. Flush the toilet to drain the majority of the water out of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-SwWyZCeAjY</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8321-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mzgvPAQaSs8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Toilet — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Locate the water shutoff valve, typically on the wall behind the toilet, and turn the handle clockwise until it stops to turn off the water supply. Then, carefully remove the heavy ceramic tank lid and place it on a soft, safe surface, like a towel, to prevent damage. Flush the toilet to drain most of the water out of the tank, making the next steps cleaner and easier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mzgvPAQaSs8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8321-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yud54mMb6Oc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Toilet Tank and Bowl — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>To prepare the toilet for removal, first shut off the water supply by turning the valve behind the toilet clockwise. Remove the tank lid and flush the toilet to empty the tank. Disconnect the water supply line from the bottom of the tank. Use a sponge to soak up any remaining water in the tank, wringing it out into a bucket. Then, use a toilet plunger in the bowl to force out as much trapped water as possible. Finally, use the sponge again to remove the last of the water from the bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yud54mMb6Oc</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8323-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YxQt8ZyJ92E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Toilet and Disconnect Water Supply — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Locate the water shut-off valve on the wall behind the toilet and turn it to the &apos;off&apos; position. Flush the toilet to drain the water from the tank. Place a bucket under the tank&apos;s water inlet connection to catch any remaining water. Then, unscrew the existing water supply line from the bottom of the toilet tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YxQt8ZyJ92E</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8323-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RNcstPVoX7s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect the Old Supply Line — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>First, ensure the water shut-off valve next to the toilet is turned off completely. Place a towel on the floor and a small bucket directly below the valve to catch any water that drains from the line and toilet tank. Using an adjustable wrench, loosen the metal nut connecting the supply line to the shut-off valve. Once loose, you can unscrew it the rest of the way by hand. Next, reach up under the toilet tank and unscrew the plastic nut connecting the other end of the supply line to the toilet&apos;s fill valve. This can usually be done by hand. Once both ends are disconnected, remove the old supply line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RNcstPVoX7s</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8323-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-pniBrQkf54/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>To prepare for the water connection, flush the toilet to drain the tank of most of its water. Then, locate the water supply shut-off valve on the wall or floor behind the toilet and turn it clockwise to shut off the water. Finally, unscrew the flexible supply hose from the threaded connection at the bottom of the toilet tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-pniBrQkf54</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8326-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TRYwjtrJ3vA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Water and Test for Leaks — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Reconnect the water supply line to the fill valve connection on the bottom of the tank, hand-tightening it securely. Turn the water supply valve back on by twisting it counter-clockwise. Allow the tank to fill completely with water. As it fills and once it&apos;s full, carefully check all your new connections—the base of the water supply line and around both new tank bolts—for any signs of dripping or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TRYwjtrJ3vA</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8326-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F20NuU37qeY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Water and Test for Leaks — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Once the tank is securely fastened, reconnect the water supply line to the fill valve on the bottom of the tank. Hand-tighten it, and then give it a slight turn with a wrench if needed. Turn the water supply valve back on by rotating it counter-clockwise. Watch the tank fill with water, carefully checking for any leaks around the new bolts and the water supply connection. After the tank is full, perform a test flush. Again, check all around the base of the tank for any signs of water. If no leaks are present, the repair is complete. Place the tank lid back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F20NuU37qeY</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8326-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PUVssZsSbPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Water and Check for Leaks — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Reconnect the water supply line to the bottom of the fill valve, hand-tightening the coupling nut. Turn the water supply valve counter-clockwise to turn the water back on. Allow the tank to fill and check for any leaks around the base of the tank and the bolt connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PUVssZsSbPw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8324-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TIJF_f6Zdp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reattach Tank and Test — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Carefully place the tank back onto the toilet bowl, guiding the newly installed bolts through the holes in the bowl. From underneath, place a metal washer and a wing nut on each bolt. Hand-tighten the wing nuts, alternating between them to ensure the tank is lowered evenly and sits level on the bowl. Once snug, reconnect the water supply line to the fill valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TIJF_f6Zdp0</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8324-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dG8YJjNu78Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Tank and Connect Water — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Carefully place the refurbished tank back onto the toilet bowl, aligning the new tank bolts with the holes in the bowl. From underneath, install the washers and nuts onto the bolts. Tighten the nuts alternately and evenly until the tank is secure and does not wobble. Reconnect the water supply line to the new fill valve. Turn the water supply back on using the shut-off valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dG8YJjNu78Q</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8324-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/85B0cApYU80/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Hardware and Reconnect Water — How to Fix a Leaking Toilet Tank-to-Bowl Connection</video:title>
      <video:description>Apply gentle, even downward pressure to the top of the tank to keep it level. Use a wrench to tighten the nuts on the bolts underneath the bowl. Tighten each nut a little at a time, alternating between them to ensure the tank settles evenly. Tighten until the tank is stable and does not wobble. Be very careful not to over-tighten, as this can crack the porcelain. Reattach the water supply line to the fill valve and hand-tighten it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/85B0cApYU80</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8308-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u529afKZggA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demolish Old Cast Iron Flange — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Using a claw hammer, carefully but forcefully strike the old, rusty cast iron flange to break it apart. Work around the perimeter of the flange, hitting it repeatedly until it cracks and shatters. Once broken, remove all the pieces from around the drain pipe. Be cautious as the broken metal pieces will be sharp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u529afKZggA</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8308-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xd871gxEre4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Drain Pipe — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>After all the large pieces of the old flange are removed, the plumber takes out the temporary rag from the drain. He then uses a chisel to meticulously scrape the inside surface of the cast iron pipe, removing any residual scale, old lead, and oakum. This step is critical to create a smooth, clean surface for the new flange&apos;s rubber gasket to seal against.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xd871gxEre4</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8308-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E3ccc5Uir_0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Begin by identifying the cast iron hubs that need to be removed. Gather all necessary tools and safety equipment. This includes an acetylene torch, a flathead screwdriver for picking out the lead, a hammer, channel-lock pliers, and safety glasses. Critically, if working on a vertical pipe stack, stuff a rag down into the pipe below the joint to catch any falling debris or molten lead, which could cause a serious blockage. It is also wise to have a fire extinguisher and a spray bottle of water on hand for safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E3ccc5Uir_0</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8309-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8MMA29H0duI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Leaks — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>The final and most critical step is to check for any leaks. Turn the faucet on and let the water run. Carefully inspect all new connections: where the supply lines connect to the faucet and the shut-off valves, where the drain strainer meets the sink, and all the slip-joint connections on the P-trap and tailpiece. Look and feel for any drips. If everything is dry, the installation is successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8MMA29H0duI</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8309-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5kEWGhk7pzY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final System Flush and Test — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>To complete the job, go to the fixtures connected to the newly snaked drains and run a large volume of water. The user turns on the bathroom sink and fills the bathtub with a significant amount of water before releasing the drain stopper. This powerful flush pushes any remaining loose debris through the system and into the main sewer line, and serves as a final test to confirm that all drains are flowing quickly and efficiently.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5kEWGhk7pzY</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8309-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XZKf8r4sCVo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pressure Test Water Lines — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>After all water lines are run and the fixture stub-outs are capped, the final step before inspection is to test for leaks. Go to the main supply valves and slowly open them to allow water to fill and pressurize the new pipes. Once the system is under full pressure, meticulously inspect every single connection, joint, and fitting with a flashlight. Look and feel for any signs of moisture or dripping. Leave the system pressurized for an extended period to check for slow leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XZKf8r4sCVo</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8310-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y3jgevErgIc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Plumber&apos;s Putty and Prepare Gaskets — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Take a generous amount of new plumber&apos;s putty and roll it between your hands to form a rope that is about 1/4 to 1/2 inch thick. The rope should be long enough to circle the entire underside of the drain flange. Press the putty rope firmly onto the clean, dry flange. On the counter, arrange the gaskets in the correct order for reinstallation: first the rubber gasket, then the cardboard friction ring. A small amount of petroleum jelly can be applied to the rubber gasket to help condition it and improve the seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y3jgevErgIc</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8310-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gwgjkv8jCjc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Join Pipe with Hubless Couplings — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>For no-hub pipe, begin by ensuring the pipe ends are smooth and clean. Place the rubber gasket onto one pipe end, pushing it until the pipe hits the gasket&apos;s internal shoulder. Insert the second pipe or fitting into the other side of the gasket until it is fully seated. Slide the shielded coupling assembly over the gasket. Using a calibrated torque wrench, tighten the clamp bands. It is crucial to alternate tightening between the clamps and to work from the inside clamps outward on multi-clamp couplings, applying torque in small increments (e.g., 20 in-lb at a time) until the specified torque (e.g., 60, 80, or 120 in-lb) is reached.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gwgjkv8jCjc</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8310-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E_v5mvljra0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Silicone Sealant — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Apply a liberal amount of 100% silicone sealant directly into the gap you created above the rubber gasket. Ensure you apply it all the way around the pipe. Also, apply sealant below the gasket and on the lock nut. Use your gloved finger to spread the sealant and press it into all the crevices to ensure a complete seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E_v5mvljra0</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8304-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1GdbqotPkD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wear protection — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Wear leather gloves to protect your hands while you&apos;re handling the cable. Do not use cloth gloves. Wear safety glasses or goggles to protect your eyes from debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1GdbqotPkD4</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8304-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8yb0S6ahyg0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Before starting, ensure you are wearing the proper personal protective equipment (PPE). In the video, the user is wearing safety glasses, hearing protection, and gloves. Place the galvanized pipe securely on a sawhorse to keep it stable during the cutting process. This setup ensures both safety and accuracy for the task.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8yb0S6ahyg0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8304-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/THuA0kHyIAw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Don Safety Gear — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Grinding cast iron creates hazardous dust and sparks. Before beginning to cut, it is crucial to put on all appropriate safety gear. This includes a high-quality respirator to protect against inhaling metal and concrete dust, safety glasses or goggles to protect the eyes from sparks and debris, and hearing protection (earmuffs) to guard against the loud noise of the drill and grinding. Wear heavy-duty gloves to protect your hands.</video:description>
      <video:player_loc>https://www.youtube.com/embed/THuA0kHyIAw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8306-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BiR3eFlb2Fs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Joint Surfaces — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>To ensure a strong and leak-proof solder joint, both surfaces must be perfectly clean and free of oxidation. Use a 4-in-1 pipe cleaning tool or separate wire brushes. Scour the outside of the male PEX adapter until it is shiny. Then, use a fitting brush to clean the inside of the valve&apos;s female port. A drill with a brush attachment can speed up this process. After brushing, wipe both surfaces with a clean cloth to remove any loose particles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BiR3eFlb2Fs</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8306-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zdC_EhoxIJg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Hub — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Clean the cast iron hub using denatured alcohol and a rag, ensuring all debris is removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zdC_EhoxIJg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8306-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4R2ci-pHCRQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Lead Pipe and New Flange — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Thoroughly clean the exposed surface of the lead drain pipe to prepare it for soldering. Attach a wire brush to a drill and use it to scrub the lead surface until it is shiny and free of oxidation and debris. Also clean the underside of the new brass flange where it will contact the lead.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4R2ci-pHCRQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8307-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6BiySFgZ0oE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the SharkBite Fitting — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>With the pipe prepared and marked, push the SharkBite fitting onto the end of the pipe. You will feel an initial resistance as the pipe goes past the stainless steel grab teeth. Continue pushing firmly. You will then feel a second, more subtle point of resistance as the pipe contacts the O-ring. You must apply enough force to push the pipe past this O-ring until it comes to a hard stop. The depth mark you made earlier should now be aligned with the edge of the fitting, confirming it is fully and correctly seated. This creates a secure, watertight connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6BiySFgZ0oE</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8307-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PAfrJCJ1C0Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Pipe and Install Gasket — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>To begin, ensure the ends of the cast iron pipe and/or fitting are cut square. Slide the rubber gasket onto the end of one pipe. Join the two sections of pipe or pipe-and-fitting together. Then, carefully roll or slide the gasket until it is perfectly centered over the joint, ensuring it is straight and not twisted. For Husky brand couplings, it is especially important to make sure both pipe ends are firmly seated against the internally molded shoulder located in the center of the gasket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PAfrJCJ1C0Q</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8307-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cd76Dk5vGSc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Twist to Expand Gasket — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Once the flange is seated in the pipe, firmly grip the top of the flange with your hands and twist it clockwise. As you twist, an internal mechanism expands the rubber gasket, pressing it firmly against the inside wall of the drain pipe to create a tight, secure seal. Continue twisting until it feels snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cd76Dk5vGSc</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8305-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ss24yIKeGs0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Pipe — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>To begin, cut the pipe (PEX, copper, or CPVC) squarely to the desired length using a suitable pipe cutter. For copper pipes, it is critical to use a deburring tool to smooth the inside and outside of the cut edge. This prevents sharp edges from damaging the O-ring inside the push-fit fitting. Finally, use a ruler and a marker to measure and mark the correct insertion depth on the end of the pipe. This mark will serve as a visual guide to ensure the pipe is fully inserted into the fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ss24yIKeGs0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8305-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/venC56OlYX8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Pipe — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Using a pipe cutter or saw, carefully cut out the damaged section of the PVC pipe. You need to create a gap that is wide enough to accommodate the entire union assembly. A gap of approximately 2 to 2.5 inches is required. After cutting, clean the pipe ends and remove any burrs with sandpaper or a deburring tool.</video:description>
      <video:player_loc>https://www.youtube.com/embed/venC56OlYX8</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8305-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RhtWaKag7js/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create the PVC Patch — How to Connect PVC Drain Pipe to a Cast Iron Hub</video:title>
      <video:description>Using a hacksaw, cut a section of spare PVC pipe that is slightly longer than the crack in the leaking pipe. Smooth the cut edges by hand. Use a ruler and marker to draw two parallel lines along the length of the pipe section. Carefully saw along these lines to remove a strip, creating a C-shaped patch that can fit over the leaking pipe. Clean any burrs from the new cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RhtWaKag7js</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8301-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8QXnBcQvgQQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Toilet and Clean Excess Plaster — How to Install a Toilet Flange Extender</video:title>
      <video:description>With the toilet level, place the washers and nuts on the flange bolts. Tighten the nuts evenly on both sides with an adjustable wrench, being careful not to overtighten and crack the porcelain. Cut off the excess length of the bolts with a hacksaw. Once the plaster has set, use a utility knife to score the excess plaster around the base of the toilet. Then, use a scraper or putty knife to chip away the excess hardened plaster for a clean finish. Finally, place the bolt caps over the nuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8QXnBcQvgQQ</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8301-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Px8BtZRrv60/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Closet Bolts — How to Install a Toilet Flange Extender</video:title>
      <video:description>Pry off the plastic caps that cover the bolts on each side of the toilet base. Use an adjustable wrench to gently tighten the nut on each bolt. Alternate between the left and right sides to ensure even pressure. Be very careful not to over-tighten, as you can crack the toilet&apos;s porcelain base. If the nut is loose, a few turns should be enough. Also, inspect the washer underneath the nut to ensure it is not bent or damaged.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Px8BtZRrv60</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8301-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eNUMY8PiSYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Closet Bolts — How to Install a Toilet Flange Extender</video:title>
      <video:description>Once the shims are in place and the toilet is stable, use an adjustable wrench to carefully tighten the nuts on the closet bolts located on each side of the toilet base. Alternate between tightening each side to apply even pressure. Tighten until snug, but do not overtighten, as this can crack the toilet&apos;s porcelain base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eNUMY8PiSYs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8298-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LiNJrnbJxns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Seal and Clean Flange — How to Install a Toilet Flange Extender</video:title>
      <video:description>After removing the toilet, you will see the floor flange and the old seal. The video shows a rubber seal, but typically you will find a wax ring. Scrape off all remnants of the old wax ring from the flange and the bottom of the toilet using a putty knife. Clean the area thoroughly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LiNJrnbJxns</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8298-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cCPLGu0mces/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Repair the Closet Flange — How to Install a Toilet Flange Extender</video:title>
      <video:description>Scrape off the old wax ring from the toilet flange. Use paper towels and a cloth to thoroughly clean the flange and the surrounding floor area. Inspect the flange for damage. In the video, the metal part of the closet flange is heavily rusted. Use pliers to break away and remove the corroded metal ring. Stuff a rag into the drain pipe to block sewer gases and prevent debris from falling in.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cCPLGu0mces</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8298-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TEsQ4RH9nXY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Old Wax from Flange — How to Install a Toilet Flange Extender</video:title>
      <video:description>Before starting, ensure you have the new wax-free toilet seal kit. The first step is to thoroughly clean the old wax off the toilet flange. Wearing gloves, use disposable packing paper or rags to scrape and wipe away all the sticky residue from the flange and the surrounding floor. Remove and discard the old flange bolts as the kit provides new ones.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TEsQ4RH9nXY</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8299-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Ojo7ObonCc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Toilet Bowl — How to Install a Toilet Flange Extender</video:title>
      <video:description>Before setting the toilet, remove the rag you placed in the drain pipe. Carefully lift the toilet bowl, keeping it as level as possible. Look over the bowl to align the holes in its base with the closet bolts sticking up from the floor. Lower the toilet straight down onto the bolts. Once it&apos;s in place, press down firmly on the toilet bowl with your body weight to compress the wax ring and create a seal. Use a tape measure to check that the toilet is parallel with the wall behind it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Ojo7ObonCc</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8299-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HWHlB-xJXMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Toilet — How to Install a Toilet Flange Extender</video:title>
      <video:description>After the flange extender is securely screwed down, the final steps are to prepare for the toilet installation. Insert new closet bolts into the slots on the yellow extender. Place a new wax ring onto the extender. Finally, carefully lower the toilet onto the flange, aligning the holes in its base with the closet bolts, and press down firmly to set the toilet and create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HWHlB-xJXMY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8299-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/L-WyUkXq3HY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Toilet Bowl — How to Install a Toilet Flange Extender</video:title>
      <video:description>Carefully lift the assembled toilet, positioning it directly over the floor flange. Align the holes in the base of the toilet with the bolts sticking up from the flange. Lower the toilet straight down onto the bolts. Once it&apos;s in place, put your body weight on the toilet by sitting on it to firmly compress the wax ring. This creates the watertight seal. Rock the bowl gently to ensure it&apos;s level and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/L-WyUkXq3HY</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8300-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5df9dwpET98/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair the Closet Flange — How to Install a Toilet Flange Extender</video:title>
      <video:description>To fix the damaged flange, a new metal adjustable replacement flange, also known as a repair ring, is installed. This two-piece ring slides underneath the existing flange&apos;s bolts or edges and is positioned over the drain. The two halves are joined together. Screws are then driven through the repair ring into the subfloor to create a solid, level mounting surface. New closet bolts are inserted into the slots on the new repair ring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5df9dwpET98</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8300-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HWHlB-xJXMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Toilet — How to Install a Toilet Flange Extender</video:title>
      <video:description>After the flange extender is securely screwed down, the final steps are to prepare for the toilet installation. Insert new closet bolts into the slots on the yellow extender. Place a new wax ring onto the extender. Finally, carefully lower the toilet onto the flange, aligning the holes in its base with the closet bolts, and press down firmly to set the toilet and create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HWHlB-xJXMY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8300-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tr5kPt2ZRVw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Sealant and Install Flange Bolts — How to Install a Toilet Flange Extender</video:title>
      <video:description>Apply a generous, continuous bead of polyurethane sealant around the top surface of the original, recessed flange. This sealant will adhere the first spacer ring and create a waterproof barrier. After applying the sealant, insert the extended flange bolts into the slots on the original flange. Use a tape measure to ensure they are positioned correctly, typically 12 inches from the finished wall and parallel to it. If you drop a part, use a magnetic pickup tool to retrieve it from the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tr5kPt2ZRVw</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8302-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Kv7iegFqaBY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install T-Bolts and Wax Ring — How to Install a Toilet Flange Extender</video:title>
      <video:description>With the flange securely installed, prepare for the toilet placement. Insert the new T-bolts into the flange slots, facing them upwards. Place a new wax ring directly onto the flange, centering it perfectly over the drain opening. This will create the final seal between the toilet and the flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Kv7iegFqaBY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8302-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HWHlB-xJXMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Toilet — How to Install a Toilet Flange Extender</video:title>
      <video:description>After the flange extender is securely screwed down, the final steps are to prepare for the toilet installation. Insert new closet bolts into the slots on the yellow extender. Place a new wax ring onto the extender. Finally, carefully lower the toilet onto the flange, aligning the holes in its base with the closet bolts, and press down firmly to set the toilet and create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HWHlB-xJXMY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8302-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0HuRb0qU30s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Flange to Floor — How to Install a Toilet Flange Extender</video:title>
      <video:description>Once the flange is properly seated and level, align the bolt slots as needed for your toilet installation. Use a power drill to drive screws through the designated holes in the flange&apos;s outer ring, fastening it securely to the subfloor. This completes the installation, and the flange is now ready for a toilet to be set on top.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0HuRb0qU30s</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8303-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tMY2VLszkoI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Silicone Sealant — How to Install a Toilet Flange Extender</video:title>
      <video:description>Using a caulk gun, apply a continuous and generous bead of silicone sealant all the way around the cleaned sink flange. Ensure the bead is unbroken to create a complete, waterproof seal when the sink is pressed against the countertop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tMY2VLszkoI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8303-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/klfueGAEM_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Silicone Sealant — How to Install a Toilet Flange Extender</video:title>
      <video:description>Using a caulk gun, apply a thick, continuous bead of 100% silicone caulk onto the tile surface, encircling the entire opening for the valve. This bead of sealant is crucial for creating a watertight barrier behind the escutcheon plate, preventing water from infiltrating the wall cavity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/klfueGAEM_E</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8303-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5ECHexhPS-k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Silicone Sealant to Flange — How to Install a Toilet Flange Extender</video:title>
      <video:description>Using a caulk gun, apply a continuous and generous bead of white silicone sealant to the entire underside of the drain&apos;s top flange. This sealant will form the primary waterproof barrier between the drain and the sink basin.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5ECHexhPS-k</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8291-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YhTwjjXP2PA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Warm the Drain — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Before starting, ensure the work area is ventilated. Put on protective gloves and safety goggles to protect your hands and eyes from the chemical drain opener. If your drain has a stopper, remove it. Turn on the hot water and let it run into the drain for about 30 seconds to a minute. This warms up the pipes, which helps the chemical reaction work more effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YhTwjjXP2PA</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8291-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1CKZ3rJ1974/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing and Electrical — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Before attempting to move or cut the bathtub, ensure all utilities are disconnected. Shut off the main water supply to the house. Since this is a jetted tub, locate the electrical cord powering the motor and unplug it from its outlet. Underneath the tub, disconnect the main drain pipe assembly. Finally, disconnect the hot and cold water supply lines that connect to the faucet fixtures. Keep a towel and a cup nearby to catch any water that will inevitably spill from the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1CKZ3rJ1974</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8291-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l1aNURjEoJA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Recess the Floor Drain Fitting — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>To create the necessary clearance, you must recess the drain fitting into the floor. Protect the surrounding tile by applying painter&apos;s tape around the work area. Carefully chip away the tile and the concrete subfloor around the PVC drain pipe. Continue to remove material until the drain fitting can sit approximately one to one-and-a-half inches below the tile surface, allowing it to align correctly with the low-hanging tub drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l1aNURjEoJA</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8292-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vvlj6lMQTQI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush the Pipe Towards the Pump — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Turn on the water at the spigot. The bladder will inflate, creating a tight seal within the pipe, and then release powerful pulses of water. This action forces the clog down the pipe towards the pump. To monitor progress, you can remove the lid of the pump&apos;s strainer basket and watch for the dislodged debris (leaves, etc.) to come through. Allow the water to run for several minutes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vvlj6lMQTQI</video:player_loc>
      <video:duration>153</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8292-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/43ZchEMW9-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand the Drain Bladder&apos;s Function — How to Use a Drain Cleaning Bladder to Clear Stubborn Clog</video:title>
      <video:description>Familiarize yourself with the drain bladder. It&apos;s a tool that attaches to a standard garden hose. When water is turned on, the bladder inflates to create a tight seal inside the drain pipe. Once sealed, it releases a powerful jet of water to dislodge the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/43ZchEMW9-g</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8292-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SxUUsgq9wlY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Blast and Plunge the Clog — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>With the hose positioned at the clog, have someone turn the water on to full pressure. Vigorously move the hose back and forth in a plunging or ramming motion. The combination of the hose&apos;s physical force and the high-pressure water stream will work to break up and flush away the solid waste causing the clog. Continue this for about a minute or until you hear a distinct &apos;whoosh&apos; sound and see the water level in the pipe rapidly drop, signifying the clog is cleared.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SxUUsgq9wlY</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8293-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FwS_Y7zJBJY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Drain Plumbing via Access Panel — How to Use a Drain Cleaning Bladder to Clear Stubborn Clog</video:title>
      <video:description>To connect the bathtub&apos;s drain, work through an access panel that has been cut into the floor tile. This opening allows you to reach the drain pipe in the floor and connect the flexible drain hose from the bathtub. Ensure all fittings are hand-tightened first, then gently snugged with a wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FwS_Y7zJBJY</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8293-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZrZ_VmmSduc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Hair Clog — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>With the drain plug removed, use a pair of needle-nose pliers to reach down into the drain opening. Most bathtub clogs are caused by hair accumulating around the drain crossbars. Feel around with the pliers, grip the clog firmly, and pull it out. You may need to repeat this process a few times to get all of the debris. Dispose of the hair clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZrZ_VmmSduc</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8293-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sv_psMn0tW0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Drain Assembly — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>First, place the new rubber gasket over the drain pipe, ensuring it sits flat against the underside of the bathtub. Next, take a small amount of plumber&apos;s putty and roll it into a rope shape. Press this putty rope firmly onto the underside of the new drain&apos;s flange. Insert the new drain into the tub&apos;s drain hole and screw it clockwise into the drain pipe. Hand-tighten it first, then use the drain removal tool to tighten it securely. Wipe away any excess putty that squeezes out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sv_psMn0tW0</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8294-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/43ZchEMW9-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand the Drain Bladder&apos;s Function — How to Use a Drain Cleaning Bladder to Clear Stubborn Clog</video:title>
      <video:description>Familiarize yourself with the drain bladder. It&apos;s a tool that attaches to a standard garden hose. When water is turned on, the bladder inflates to create a tight seal inside the drain pipe. Once sealed, it releases a powerful jet of water to dislodge the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/43ZchEMW9-g</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8294-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gU2tmfx2fRw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush the Drain — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>With the bladder positioned in the pipe, turn on the water supply to the garden hose. The bladder will rapidly inflate, sealing off the pipe opening behind it. A powerful jet of water will then shoot forward from the tip of the bladder, dislodging and flushing the clog down the sewer line. Let the water run for several minutes to thoroughly clear any remaining debris from the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gU2tmfx2fRw</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8294-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/23T9p5NJHMc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Drain Bladder — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>After turning off the water, carefully remove the hose and bladder from the drain. If it feels stuck, twist the hose clockwise while pulling. This ensures you are tightening the bladder onto the hose, preventing it from detaching inside the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/23T9p5NJHMc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8295-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rt6g8t2XEws/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach The Hose Connector — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Take the plastic threaded connector piece and slide it over the end of the flexible sprayer hose. You must push firmly until the small raised lip at the very end of the hose&apos;s plastic fitting pops completely through the connector. This ensures a snug and secure fit for the locking clamp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rt6g8t2XEws</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8295-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mSid_O8GLq0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Hose to Drain Valve — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Locate the hose bib, which is the drain valve, at the bottom of the pressure tank. Take one end of a garden hose and carefully thread it onto the hose bib by turning it clockwise. Once hand-tight, use a pair of channel-lock pliers to gently tighten the connection a little more to ensure it&apos;s secure and won&apos;t leak under pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mSid_O8GLq0</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8295-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q56YRdLoIzI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Quick-Connect Fittings — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>At the free end of the hose under the sink, insert the small washer into the hex nut. Screw the quick-connect adapter into the hex nut. Use an adjustable wrench and pliers to gently tighten the connection. Separately, wrap the faucet&apos;s male connection with 2-4 turns of pipe thread tape, then screw on the male nipple adapter and tighten it with a wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q56YRdLoIzI</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8296-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xpp0szx6P-4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select the Correct Bladder Size — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Choose the appropriate Drain Cleaning Bladder for your pipe size. The video shows three standard sizes: Small for 1-2 inch pipes, Medium for 1.5-3 inch pipes, and Large for 4-6 inch pipes. There are also &apos;Pro&apos; versions with an added valve for tougher blockages. Select the bladder that matches the diameter of your clogged pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xpp0szx6P-4</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8296-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U5Cz2mabAPA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Select Bladder Size — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Begin by gathering your tools. You will need a drain cleaning bladder of the appropriate size for your drain, a garden hose long enough to reach from a water source to the clogged drain, and potentially a faucet adapter. Cobra Products offers three sizes: Small for 1-inch to 2-inch drains, Medium for 1.5-inch to 3-inch drains, and Large for 4-inch to 6-inch drains. For this project, a small bladder is chosen for a 1.25-inch utility sink drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U5Cz2mabAPA</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8296-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gU2tmfx2fRw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Drain Cleaning Bladder — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>First, obtain the correct size drain cleaning bladder for your pipe diameter. The video shows two sizes: a medium for 1-1/2&apos; to 3&apos; drains and a large for 4&apos; to 6&apos; drains. For a main sewer line, the large size is selected. Unpackage the bladder and securely screw its threaded brass fitting onto the end of a standard garden hose. Test the bladder by turning on the water briefly to see how it inflates and sprays a jet of water from its tip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gU2tmfx2fRw</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8297-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eL0Sm0xv16k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Water Pressure — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Walk back to the water spigot and turn on the water supply to the garden hose. The water will flow into the bladder, causing it to inflate and create a seal inside the pipe. High-pressure jets of water will then be forced out of the tip of the bladder, directed at the clog. The bladder and hose may pulsate as the pressure builds and releases. Allow the water to run for a minute or two to work on the blockage. You may see some water bubbling back out of the drain opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eL0Sm0xv16k</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8297-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9fJMPUyRBPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Clog with Drain Bladder — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Insert the drain bladder into the clogged pipe. Push it in far enough to be past any initial bends or Y-joints to ensure the pressure is directed at the clog. Have a helper at the water spigot. Signal them to turn the water on. The bladder will inflate against the pipe walls, creating a seal. High-pressure water jets will then shoot forward, building hydraulic pressure against the clog. Listen for a &apos;whoosh&apos; or gurgling sound, which indicates the clog has been dislodged and water is flowing freely. Once you hear this, signal your helper to turn the water off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9fJMPUyRBPw</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8297-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NrwBQAEyJ0I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify and Clean Up — How to Use a Drain Cleaning Bladder to Clear Stubborn Clogs</video:title>
      <video:description>Once the clog is cleared, turn off the pressure washer and release any remaining pressure by squeezing the gun&apos;s trigger. Carefully withdraw the hose from the toilet. Finally, perform a test flush to confirm that the drain is working correctly. The water should go down quickly and powerfully.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NrwBQAEyJ0I</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8261-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3USfrjDcLhY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the P-Trap — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>Using a pair of channel-lock pliers or by hand if possible, loosen the two slip nuts that secure the P-trap. One nut connects the trap to the vertical tailpiece coming from the sink, and the other connects to the horizontal drain arm going into the wall. Unscrew both nuts completely and carefully lower the P-trap away from the pipes, allowing it to drain into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3USfrjDcLhY</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8261-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iXYjyjJTjDo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Drain and Supply Lines — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>Place a bucket directly under the P-trap to catch any trapped water. Use channel-lock pliers to loosen the two large slip nuts that connect the curved P-trap to the sink&apos;s drain tailpiece and the drain pipe in the wall. Once loose, you can finish unscrewing them by hand and remove the P-trap, emptying any water into the bucket. Next, unscrew the connectors for the hot and cold water supply lines from the shutoff valves, allowing them to drain into the bucket as well.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iXYjyjJTjDo</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8261-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eDCwcI2dpkM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the P-Trap — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>If plunging fails, check the P-trap under the sink. Place a bucket underneath to catch water and gunk. If the trap has a plug or can be unscrewed, remove it. Use a plumber&apos;s snake to poke into the open pipe and clear out any debris. Once clear, securely reassemble the trap. Be extremely cautious if you have previously used chemical drain cleaners.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eDCwcI2dpkM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8259-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-qEO67YwhSk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plunge the Drain — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>With the overflow sealed, place the plunger cup directly over the main drain, ensuring it is fully submerged in the standing water. Firmly grip the plunger handle with your free hand and perform a series of vigorous up-and-down strokes. Push down to create pressure and pull up to create suction. Continue this motion until you feel the clog give way and the water begins to rapidly drain. You may see debris come up from the drain, which indicates the clog has been broken up.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-qEO67YwhSk</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8259-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2fBcmqXW20o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify and Flush the Drain — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>After a successful plunge, you will hear a distinct gurgling sound as the standing water rapidly drains from the sink. This indicates the blockage has been cleared. To ensure the drain is fully clear and to wash away any residual material, remove the plunger and the stopper from the other side, and run hot water down the newly unclogged drain for a minute or two.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2fBcmqXW20o</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8259-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/91dBnkgu-Bw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plunge the Clogged Drain (Optional) — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>If the drain remains slow, the clog is likely further down. To plunge it, first, use a damp rag to completely cover the sink&apos;s overflow hole. Fill the sink with a few inches of water, enough to submerge the cup of the plunger. Place the plunger over the drain to create a tight seal and then push and pull rapidly and forcefully to create pressure and dislodge the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/91dBnkgu-Bw</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8258-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W8hvaPMxtik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Plumbing — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>From underneath, reattach the P-trap to the sink tailpiece and the wall drain. Hand-tighten the slip nuts. Reconnect the hot and cold water supply lines to the shutoff valves, ensuring any gaskets are in place. Turn the water back on slowly and check for any leaks at all connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W8hvaPMxtik</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8258-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dQpPEudltI8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water and Check for Leaks — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>Slowly turn on the shut-off valves for both hot and cold water by turning the handles to the left (counter-clockwise). Turn on the faucet and let the water run. Close the pop-up drain to fill the sink partially, then release it to test the drain connection under a full flow. Use a flashlight to carefully inspect all new plumbing connections, including the supply lines and the entire P-trap assembly, for any drips or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dQpPEudltI8</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8258-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IO00HHgBN-Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Clean — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>After removing the clog, clean the area. Wipe the end of the drain pipe opening with a cloth. Re-install the P-trap, making sure the washers are correctly positioned inside the slip nuts. Hand-tighten both nuts securely to create a watertight seal. Wipe down the exterior of the pipes to clean up any remaining water or residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IO00HHgBN-Y</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8260-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kzH-b8JnulA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Operate the Auger to Clear the Clog — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>With the auger in position, turn the crank handle clockwise to extend the flexible cable into the drainpipe. Apply gentle, steady pressure to guide the cable through the toilet&apos;s internal trap. The narrator extends the cable six feet to ensure it reaches well past any potential clog. As you work, move the auger back and forth and continue rotating the handle. This combined motion helps to either break up the obstruction or hook onto it so it can be pulled out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kzH-b8JnulA</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8260-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5KlHi-iTjp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extend and Rotate the Auger — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>Hold the main shaft of the auger steady with one hand. With the other hand, simultaneously push the handle down towards the shaft and turn it in a clockwise direction. This action extends the metal snake out of the protective tube and into the toilet&apos;s trap and drainpipe. The rotating motion helps the auger head to either break through the blockage or to hook onto it. Continue this motion until the entire length of the cable is extended or you feel the clog give way. You may need to pull back slightly and push forward again to work through the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5KlHi-iTjp0</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8260-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z5WNCFCgGNA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extract the Clog — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>Once you are confident that the auger has firmly attached to the blockage, stop cranking and begin to pull the snake cable back out of the pipe. Pull slowly and steadily to avoid dislodging the clog from the auger head. Continue pulling until the entire cable and the attached obstruction are completely removed from the plumbing vent. Properly dispose of the debris that has been pulled out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z5WNCFCgGNA</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8257-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MBYTWxBuYSg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Workspace and Remove P-Trap — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>First, prepare for the disassembly by placing a bucket directly underneath the P-trap of the sink. This will catch any water and debris that will fall out when you open the drain. Unscrew the two slip nuts that connect the P-trap to the tailpiece and the wall pipe. These can usually be loosened by hand. Once loose, remove the P-trap and empty any contents into the bucket. To prevent unpleasant sewer gas from entering the room, stuff a paper towel into the open pipe in the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MBYTWxBuYSg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8257-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a9AiyGy8_eU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the P-Trap — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>To begin, place a bucket or container directly under the sink&apos;s P-trap assembly to catch any water or debris that will spill out during disassembly. Then, wearing gloves, use your hands to loosen and unscrew the slip nuts connecting the P-trap to the sink&apos;s tailpiece and the drain pipe in the wall. Carefully remove the P-trap sections and place them in the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a9AiyGy8_eU</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8257-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NuiaqKXdcqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Old P-Trap Removal — How to Unclog a Double Kitchen Sink</video:title>
      <video:description>Begin by placing a large bucket or basin directly underneath the existing P-trap to catch any water that will be released upon disassembly. Using a pair of channel-lock pliers, grip the slip-joint nuts connecting the P-trap to the vertical tailpiece from the sink and the horizontal drain arm going to the wall. Turn the nuts counter-clockwise to loosen them. Once loose, finish unscrewing them by hand and carefully lower the P-trap, allowing the trapped water to drain into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NuiaqKXdcqg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8253-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LHg2XC3xhIg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Begin reassembly by inserting the repaired cartridge back into the faucet body. Make sure the tab on the cartridge aligns with the slot in the faucet. Screw the retaining nut back on, first by hand, then using a wrench to make it snug. Do not overtighten. Place the handle back on the stem, tighten the retaining screw with the Phillips screwdriver, and finally, press the decorative cap firmly into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LHg2XC3xhIg</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8253-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1F7vaI-6ct4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Faucet — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Reassemble the faucet by following the disassembly steps in reverse. First, screw on the cartridge retaining nut by hand, then use pliers to tighten it until snug. Next, screw on the large brass retaining nut and tighten it by gently tapping with the screwdriver and hammer. Place the handle back onto the valve stem, tighten the set screw with the Allen wrench, and press the decorative cap back into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1F7vaI-6ct4</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8253-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6qIAYcRQCsE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Insert the repaired cartridge back into the faucet body. Hand-tighten it by turning it clockwise. Once it&apos;s snug, use the channel-lock pliers to give it a final quarter-turn to secure it fully. Place the handle back on the cartridge stem, insert the retaining screw, and tighten it with the Phillips head screwdriver. Snap the decorative cap back on top.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6qIAYcRQCsE</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8251-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PMEVFDfiSiw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extract the Old Cartridge — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>With the retaining clip removed, grip the brass stem of the cartridge with a pair of channel-lock pliers. Gently wiggle the cartridge back and forth while pulling it straight out of the valve body. Some faucets require a special cartridge puller tool if the cartridge is difficult to remove.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PMEVFDfiSiw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8251-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sSxCTmXQbsw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach and Engage Cartridge Puller — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Place the Moen cartridge puller tool over the brass valve body housing. Rotate the outer sleeve of the tool to ensure its tabs securely grip the corresponding tabs on the plastic faucet cartridge inside. Attempt to pull the cartridge out manually by wiggling and pulling up on the tool.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sSxCTmXQbsw</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8251-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hArNvXITEnE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Acquire and Prepare the Cartridge Puller — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>The first step is to acquire the necessary tool, which is a Moen cartridge puller. This specialized tool is designed to grip both the valve body and the cartridge stem to provide the leverage needed for removal. The tool features a T-handle for turning, a large hex-nut-shaped body for gripping the valve, and a central screw for engaging the cartridge stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hArNvXITEnE</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8252-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cVUlt7MJaoU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Sleeve and Escutcheon — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>With the handle removed, unscrew the metal sleeve that covers the valve stem. It should turn counter-clockwise by hand. Once the sleeve is off, the larger decorative escutcheon plate can be pulled away from the wall, exposing the valve body and the cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cVUlt7MJaoU</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8252-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m3yKsP5Akng/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Shower Faucet Trim — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>First, shut off the main water supply. Then, prepare for disassembly. Pry off the decorative cap from the center of the handle. Use a Phillips head screwdriver to remove the screw securing the handle. Pull the handle straight off the valve stem. Next, remove the two screws holding the escutcheon plate to the wall and pull the plate away.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m3yKsP5Akng</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8252-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7exNDZ3ZfgY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Escutcheon Plate — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>With the handle removed, you can take off the decorative escutcheon plate. On this model, there is a small release tab located at the bottom of the plate. Press this tab inward to disengage the clip, and then pull the plate away from the shower wall to expose the valve and plumbing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7exNDZ3ZfgY</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8250-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z_tJut6-l4c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Access — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Begin by shutting off the main water supply to the house. Open a faucet at the lowest point of the home to drain as much water as possible from the pipes. If there isn&apos;t an existing access panel behind the shower, use a utility knife to carefully cut an opening in the drywall to expose the shower valve and plumbing. Finally, open any local shut-off valves for the shower and catch the remaining water in a bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z_tJut6-l4c</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8250-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZTDrAXUxGEU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Water Shut-Off Valve — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>As a critical preparedness step, locate your home&apos;s main water shut-off valve. This is essential in an emergency, such as a burst pipe, to quickly stop the flow of water and prevent extensive water damage. The valve is often located in a basement, crawl space, utility closet, or near the water heater. Familiarize yourself with how to turn it off completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZTDrAXUxGEU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8250-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/enSp3ZKY0fk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Main Water Supply — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>The first and most critical step is to shut off the main water supply to the house. Locate the water meter box in your yard, which is typically near the curb. Lift the cover and find the shut-off valve. Using a water meter key, turn the valve a quarter turn until it stops to cut off the water flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/enSp3ZKY0fk</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8254-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dTK5uKgpMAk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Flush Valve Body — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>After all visible pieces of the old cartridge are removed, clean the inside of the valve body. Place a towel over the opening to prevent splashing. Briefly turn the main water supply on and off to flush out any remaining small debris. This ensures a clean surface for the new cartridge to seal against. Wipe the inside of the valve body to remove any residual grime.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dTK5uKgpMAk</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8254-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8A-JedNgNwk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prep and Install the New Cartridge — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Prepare the new cartridge for installation by applying a light coat of plumber&apos;s grease to the O-rings and the base. This helps it slide in smoothly and creates a better seal. Align the tabs on the side of the cartridge with the corresponding notches inside the valve body (usually at the 3 and 9 o&apos;clock positions). Ensure the side marked &apos;HOT&apos; is facing your hot water inlet (typically the left side). Push the cartridge firmly into the valve until it is fully seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8A-JedNgNwk</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8254-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JNVko87Y4fw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Cartridge — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Before inserting the new cartridge, check inside the valve body and remove any old rubber washers or seals left behind. Align the new cartridge correctly—it is typically keyed with a notch (a &apos;V&apos; shape in this case) to fit only one way. Push the new cartridge firmly into the valve body until it is fully seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JNVko87Y4fw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8255-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F4SKwTKdzMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Faucet Handle — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Locate the small decorative cap on the front of the faucet handle, which often displays the brand logo. Carefully pry this cap off using a small flathead screwdriver or your fingernail to expose the set screw underneath. Insert a 3/32 inch hex key into the set screw and turn it counter-clockwise a few times to loosen it. The screw does not need to be fully removed. Once the screw is loose, the handle will lift straight up and off the faucet stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F4SKwTKdzMY</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8255-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JbobHlxWabU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>First, carefully pry off the small decorative plug indicating hot and cold on the handle. This will reveal a set screw inside. Insert the correct size Allen wrench into the hole and turn it counter-clockwise several times to loosen the handle. You do not need to remove the screw completely. Lift the handle straight up and off the faucet body. Then, unscrew the large plastic cap underneath the handle by turning it counter-clockwise and remove it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JbobHlxWabU</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8255-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c4kBePjMZbU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Faucet Handle — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>To remove the faucet handle, locate the small set screw on the side of the handle base. Insert the 3/32 inch Allen wrench into the screw and turn it counter-clockwise several times to loosen it. The screw does not need to be fully removed. Once the screw is loose, you can lift the handle straight up off the valve stem to remove it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c4kBePjMZbU</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8256-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dQzX_-Yl3XI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Water On and Test — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Once the faucet is fully reassembled, go back under the sink and turn the hot and cold water shut-off valves counter-clockwise to restore the water supply. Return to the sink and operate the faucet handle, moving it to the hot, cold, and mixed positions. Check carefully around the base of the handle and from the spout to ensure there are no more drips or leaks. The repair is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dQzX_-Yl3XI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8256-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1F7vaI-6ct4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Check for Leaks — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>Once the faucet is fully reassembled, go back under the sink and slowly turn the hot and cold water supply valves back on by turning them counter-clockwise. Check around the base of the faucet handle for any drips or leaks. If there are no leaks, the repair is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1F7vaI-6ct4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8256-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2m53ssRy_pM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Fix a Shower Faucet Leaking from Behind the Handle</video:title>
      <video:description>With the faucet fully reassembled, turn on the water supply by opening the faucet handles. Let the water run and swivel the spout back and forth several times. Carefully inspect the base of the spout for any signs of leaking. If the area remains dry, the repair is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2m53ssRy_pM</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8244-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YbRz0VmVung/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Locate the water shut-off valves under the sink. There will be two: one for hot water (typically on the left) and one for cold water (typically on the right). Turn the handle on each valve clockwise until it stops to shut off the water supply to the faucet. After turning them off, lift the faucet handle and test both the hot and cold water to ensure the flow has completely stopped and to relieve any pressure in the lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YbRz0VmVung</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8244-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6L14ahYltOc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Before starting any work, locate the hot and cold water shut-off valves under the kitchen sink. Turn the handles of both valves clockwise until they are fully closed. This will stop the flow of water to the faucet, preventing any water damage during the removal and installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6L14ahYltOc</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8244-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lmpixiAR_RQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Before beginning any work, locate the hot and cold water shutoff valves under the kitchen sink. Turn the handles clockwise until they are fully closed to stop the water flow. Open the faucet above to drain any remaining water from the lines and confirm that the supply is completely off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lmpixiAR_RQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8249-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uI25mmqLLz4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove handle — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Remove the Delta handle. Use the Allen wrench to remove the set screw. If it is stuck due to calcium buildup, spray it with CLR or vinegar and let it sit for 5-10 minutes. Clean the screw and set it aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uI25mmqLLz4</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8249-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yuzM9os_3dM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Faucet Handle — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Using an Allen key, locate and loosen the set screw on the underside of the faucet handle. If the screw is stuck due to mineral buildup, spray it with a penetrating oil like WD-40 and let it sit for a few minutes before trying again. Be careful not to strip the screw. Once loose, pull the handle straight off. It&apos;s also a good idea to close the tub drain to prevent the set screw from being lost if it falls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yuzM9os_3dM</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8249-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bVtRknrPv_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pull the First Handle — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>After freeing the handle by dealing with the stripped screw, the handle may still be stuck on the valve stem due to mineral deposits and corrosion. Position a faucet handle puller tool over the handle, ensuring its arms are securely hooked underneath the handle&apos;s base. Tighten the center screw of the puller against the valve stem. Continue tightening to apply steady pressure, which will force the handle off the stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bVtRknrPv_E</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8245-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xXADAXo7Zso/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Handle Assembly — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Turn the handle assembly upside down and locate the Phillips head screw inside. Use a screwdriver to remove the screw. Once the screw is out, you can separate the handle lever from the conical base. Inside, you will find a plastic washer and a plastic rotating insert. These parts may be stuck due to corrosion and might require gentle prying or pushing to remove.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xXADAXo7Zso</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8245-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/idpWSTwxXtI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Forcefully Remove Seized Drain Fitting — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>To finally remove the seized drain, place the tip of a long screwdriver or a chisel into one of the notches on the drain fitting. Strike the handle of the screwdriver firmly with a hammer, directing the force in a counter-clockwise direction. This impact force breaks the corrosion&apos;s grip, allowing the fitting to be unscrewed and removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/idpWSTwxXtI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8245-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-St7cDmwj38/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Apply Penetrating Oil (Tip #2) — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>After the heat method fails, the next step is to use penetrating oil. First, use a flathead screwdriver and a wire brush to clean out any dirt, debris, and loose rust from the seam between the plug and the pipe. Once clean, liberally spray a penetrating oil, like Liquid Wrench, all around the seam. Allow the oil to soak for at least 30 minutes. For extremely stuck plugs, the host recommends letting it sit for 24 hours and reapplying the oil multiple times.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-St7cDmwj38</video:player_loc>
      <video:duration>87</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8246-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h7UDJlTmOy4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle and Cap — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Locate the small set screw on the base of the faucet handle, usually on the back. Use a 3/32 inch Allen key to turn the screw counter-clockwise, loosening it enough to remove the handle. You do not need to remove the screw completely. Lift the handle straight up and off the valve stem. Once the handle is off, unscrew the chrome decorative cap by hand to expose the cartridge retaining nut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h7UDJlTmOy4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8246-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pyBTL7GugHo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Using a small flat tool, carefully pry off the decorative cap on the faucet handle to reveal the set screw. Use a hex wrench to loosen and remove this screw. Once the screw is out, pull the handle straight up to remove it. Then, unscrew the decorative handle dome, and lift off the handle adapter and the white plastic pivot nut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pyBTL7GugHo</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8246-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J8jb6MYGlr4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen the Handle Set Screw — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Identify the specific faucet handle that needs repair. Locate the small set screw, which is typically found on the underside of the handle. Select the correct size Allen wrench from a set that fits snugly into the screw head. Insert the Allen wrench and turn it counter-clockwise to loosen the screw. You only need to loosen it enough to allow the handle to be removed; it is not necessary to take the screw out completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J8jb6MYGlr4</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8247-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_8xP4X3nG1k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position the Handle Puller — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Position the handle puller tool over the faucet handle. Ensure that the two arms, or &apos;feet&apos;, of the puller are placed securely underneath the bottom edge of the handle. Align the central threaded pin of the puller so that it rests directly in the center of the screw hole where you just removed the screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_8xP4X3nG1k</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8247-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JBUmeSYTHoY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position the Faucet Handle Puller — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>For a handle that is stuck, use a faucet handle puller. First, turn the knob on the side of the puller to open its arms. Position the puller over the faucet base so that the arms are securely hooked behind the handle. Then, tighten the side knob to close the arms and grip the handle firmly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JBUmeSYTHoY</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8247-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_f8v4OOD37Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position the Handle Puller — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Take the faucet handle puller and place it over the faucet handle. Position the two arms, or &apos;legs&apos;, of the puller so they hook securely underneath the outer edges of the faucet handle. This creates the leverage needed to pull the handle off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_f8v4OOD37Q</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8248-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dZTaN6PrQdw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Lubricate Valve Body — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Before installing the new cartridge, the valve body must be cleaned. Use a wire brush to scrub the interior walls and threads, removing any scale, corrosion, or mineral deposits. After brushing, wipe the inside clean with a paper towel. Finally, apply a liberal amount of Vaseline (petroleum jelly) to the inside of the valve with your finger. This lubrication will help the new cartridge slide in easily and create a good seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dZTaN6PrQdw</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8248-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UYEN5VH3Ysw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Debris from Pipes — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>Once the old cartridge is out, inspect the inside of the valve body for debris. In this case, pieces of the old rubber gasket are visibly lodged in the pipes. Use a small, flathead screwdriver to carefully pry and scrape these rubber pieces out of the water inlets. Afterwards, use a wire brush to scrub the inside of the valve body, removing any remaining small debris and corrosion to ensure a clean surface for the new cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UYEN5VH3Ysw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8248-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xSiJw_mXgJQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Removed Handle and Valve Stem — How to Remove a Stuck or Screwless Faucet Handle</video:title>
      <video:description>After the handle comes off, inspect the inside of the handle and the valve stem. Observe the significant amount of white and brown buildup, which is the corrosion and mineral scale that caused the handle to seize. The handle is now free and can be cleaned and reused for the next step of replacing the faucet cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xSiJw_mXgJQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8236-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c5GD8pNAzgc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Overflow Plate Base — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Now move to the overflow. From inside the tub, place the flat trim piece (cover plate base) over the overflow opening, holding it in place. From the back of the tub, thread the securing nut onto the overflow pipe&apos;s threads. Tighten the nut by hand until it&apos;s firm, compressing the gaskets on either side of the tub wall to create a waterproof seal. The double-sided tape applied earlier helps keep the gaskets from shifting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c5GD8pNAzgc</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8236-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c5GD8pNAzgc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Shoe Gasket — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Take the main drain assembly, which includes the drain shoe and overflow pipe. Locate the large, black, tapered rubber gasket. Place this gasket over the top opening of the drain shoe, ensuring the tapered side faces up, ready to seal against the underside of the bathtub. Make sure it is seated evenly and flush.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c5GD8pNAzgc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8236-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-ndRtFGGfoo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Drain Flange and Test for Leaks — How to Replace a Bathtub Waste and Overflow Drain Assemb</video:title>
      <video:description>Return to the inside of the bathtub. For the best seal, apply a thin rope of plumber&apos;s putty to the underside of the drain flange rim. Carefully align the drain flange with the drain shoe below and begin threading it in clockwise by hand. Once it&apos;s snug, use your pliers or drain wrench to tighten it fully. Be careful not to overtighten and crack the tub or strip the threads. Clean away any excess plumber&apos;s putty that squeezes out. Reinstall the drain stopper. Finally, fill the tub with water again and drain it while checking underneath for any leaks to confirm the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-ndRtFGGfoo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8239-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/drbcDvbzh-E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Engage the trip lever to close the drain. Turn on the water and let some accumulate in the tub. Turn off the water and observe the water level to ensure it is holding and no longer leaking down the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/drbcDvbzh-E</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8239-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hp5xMamrtwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Leaks — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Once all plumbing connections are made, turn the main water shutoff valves on slowly. Open the faucet and let the water run. Carefully inspect all the connections—where the supply lines connect to the valves and the faucet, and all the joints of the P-trap and drain—for any drips or leaks. If a leak is found, turn off the water and gently tighten the connection. Place a bucket or towel underneath to catch any water during the test.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hp5xMamrtwQ</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8239-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A5G3lQXtBCQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Check for Leaks — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Turn on the faucet and let the water run for a minute to test the drain flow and check for any leaks. Carefully inspect all the connections you just tightened, including both slip nuts on the P-trap and the pivot rod retaining nut, to ensure they are dry. If everything is dry and the water drains quickly, the job is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A5G3lQXtBCQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8241-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NuiaqKXdcqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Assembly and Leak Test — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Perform the final assembly. Slide the nuts and gaskets onto the pipes in the correct order. Connect the vertical tailpiece to the sink drain. Attach the bottle trap body. Insert the horizontal arm into the bottle trap and the wall plug. Hand-tighten all connections. Once everything is assembled, use a level to confirm the horizontal arm is still level. Screw the pop-up drain cap into place. Finally, turn on the faucet, fill the sink basin partially, and then release the pop-up stopper to test the entire system for leaks. Carefully check every joint and connection for drips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NuiaqKXdcqg</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8241-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s38CjwBKZ34/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Once everything is clean, reassemble the plumbing in the reverse order. Place the stopper back in the drain. Insert the pivot rod through the tailpiece and the stopper, and tighten the retaining nut. Reattach the P-trap, making sure the gaskets are correctly seated to prevent leaks. Hand-tighten the slip nuts. Finally, turn on the water and check both connections carefully for any drips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s38CjwBKZ34</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8241-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f8L3Ha8u5-k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the P-Trap — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Now that the offset fitting has corrected the alignment, you can assemble the rest of the P-trap. Attach the tailpiece extension to the bottom of the sink drain. Then, connect the J-bend (the U-shaped portion of the trap) between the tailpiece extension and the offset fitting. Ensure all washers are properly seated before hand-tightening the slip nuts to create secure, leak-proof seals.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f8L3Ha8u5-k</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8243-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bsq9LzIWGXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Tailpiece on Tub — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>With the tub on its side, install the drain and tailpiece assembly. This typically involves applying a sealant like plumber&apos;s putty under the drain flange inside the tub and then threading the brass tailpiece on from the outside. Tighten it securely with pliers. Before setting the tub, apply a lubricant such as silicone grease or dish soap to the O-rings on the end of the tailpiece. This is a critical step to ensure it slides smoothly and seals properly within the floor drain&apos;s gasket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bsq9LzIWGXU</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8243-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rTdVg6YvoaU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>After the tub is in place, turn on the water using the faucet to fill the tub. Allow some water to accumulate. Test the pop-up drain and the overflow to ensure they function correctly. Critically, check for any leaks around the base of the tub where the tailpiece connects to the floor drain before finishing the installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rTdVg6YvoaU</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8243-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9OcwJGJmcRY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Assembly and Adjustments — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Complete the installation by installing the drain stopper and overflow control. The pop-up drain stopper simply drops into the drain flange. Its height can be adjusted by turning the threaded post on its underside to ensure it sits flush when closed and allows water to drain when open. The overflow control knob, which operates the cable, is attached to the overflow cover. Test the mechanism by turning the knob to ensure the drain stopper opens and closes correctly. Finally, check the underside of the tub to ensure the gaskets have not been squeezed out of place from over-tightening. It is critical to test the installation for leaks before closing up access.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9OcwJGJmcRY</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8240-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r8KOPmzbLig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locking the tool for removing the drain — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Take your drain removal tool, such as a drain key or smart dumbbell, and insert it into the tub drain opening. If using a dumbbell, insert it through the drain and engage its tines with the strainer or crossbar. If using a drain key, turn it counter-clockwise until its expanding wings touch and grip the inner walls of the drain. Once the tool is engaged, clamp a wrench onto the nut on the key or insert a screwdriver through the dumbbell to act as a lever.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r8KOPmzbLig</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8240-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fEOKTjCiqyA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seat the Tool — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Place the drain removal tool into the opening of the tub drain. Using a mallet, gently but firmly tap the top of the tool. Continue tapping until the tool&apos;s knurled edges are securely wedged into the drain flange. This creates the friction needed to turn the drain without it slipping. Be careful not to strike too hard.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fEOKTjCiqyA</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8240-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JbWZuiO5x8I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Drain Fitting — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Insert the tub drain extractor into the broken drain fitting. Turn the extractor counter-clockwise so that its serrated edges bite into the inner walls of the fitting. Once it has a firm grip, place a crescent wrench on the hex-head of the extractor. Use the wrench to turn the entire assembly counter-clockwise to unscrew the old drain from the tub&apos;s waste and overflow elbow. This may require significant force if the drain is corroded. Continue turning until the old drain is free and can be lifted out of the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JbWZuiO5x8I</video:player_loc>
      <video:duration>124</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8235-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zMfHPA60sRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Drain Plumbing — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Go to the area beneath the bathtub, such as a basement or crawlspace, to access the drain plumbing. Locate the P-trap and drain assembly connected to the underside of the tub. Using a wrench or by hand if possible, loosen the slip nut that connects the drain assembly to the tub&apos;s drain pipe. If the connection is old and seized, you can use a reciprocating saw to cut the pipe. The goal is to completely disconnect the tub from the house&apos;s drain system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zMfHPA60sRA</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8235-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9yKUyXt-Vns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Drain and Overflow Fixtures — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>The initial step involves the disassembly and removal of the visible drain components from inside the bathtub. This includes unscrewing the overflow cover plate, which is typically held by one or two screws, and then removing the main drain flange. A specialized drain removal tool or a pair of pliers can be used to unscrew the drain flange from the drain elbow located beneath the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9yKUyXt-Vns</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8235-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sv_psMn0tW0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Drain Area — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>After removing the old drain, pry out the old, hardened rubber seal located on the drain pipe just below the bathtub. A screwdriver can be used to break it apart and remove it. Thoroughly clean the bathtub surface around the drain hole and the threads of the drain pipe to ensure a clean surface for the new components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sv_psMn0tW0</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8237-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_XDG8HVO3VU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Overflow Plate — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Begin by removing the old overflow plate. Using a flathead screwdriver, unscrew the two visible screws holding the plate to the tub wall. Loosen them completely and pull them out. Then, gently pull the old plate away from the tub to remove it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_XDG8HVO3VU</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8237-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Cyr5uinOc9M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dismantle the Drainage — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>The first action is to dismantle the bathtub&apos;s drainage system. Using a pair of pliers, unscrew and remove the overflow drain cover plate located on the vertical wall of the tub. Then, use the same pliers to grip the crossbars inside the main drain flange at the bottom of the tub and turn it counter-clockwise to unscrew and remove it. This disconnects the tub from the waste pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Cyr5uinOc9M</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8237-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zqtxofm9pVM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Overflow Mechanism — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>With the clog removed, the plumber reassembles the drain mechanism. He carefully guides the stopper assembly back into the overflow pipe. He then aligns the overflow plate with the screw holes on the tub wall and uses the screwdriver to tighten the two screws, securing the entire mechanism back in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zqtxofm9pVM</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8238-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GfZgVIAdlVg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Drain Assembly — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Begin by disassembling the old drain assembly. From the top of the sink, use a large adjustable wrench or spud wrench to unscrew the drain flange. You may need to hold the locknut on the underside of the sink to prevent the entire assembly from spinning. A bucket should be placed underneath to catch water. The connected PVC drain pipe is also cut using a saw to allow for complete removal of the old drain body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GfZgVIAdlVg</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8238-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/je6_S2wjJik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnecting the Drain — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>With the water shut off and a bucket in place, proceed to disconnect the sink&apos;s drain. The U-shaped pipe under the sink is the P-trap. It is connected by two large nuts called slip nuts. By hand, or with channel-lock pliers if tight, loosen the slip nut connecting the P-trap to the vertical pipe (tailpiece) coming down from the sink drain. Next, loosen the slip nut connecting the other end of the P-trap to the drain pipe in the wall. Carefully remove the P-trap and drain the water into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/je6_S2wjJik</video:player_loc>
      <video:duration>124</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8238-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7o2G2dqKgWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove P-Trap — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Unscrew the two slip nuts that connect the P-trap to the tailpiece and the wall drain pipe. These can usually be loosened by hand. If they are too tight, use a pair of channel-lock pliers to get them started. Once the nuts are loose, pull the P-trap down and empty the water into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7o2G2dqKgWI</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8242-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lAwTK8ILk1s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Sink Area — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Thoroughly clean the area around the drain hole on both the top and bottom surfaces of the sink. Use a paper towel or a rag to wipe away any old plumber&apos;s putty, residue, and grime. A clean surface is essential for creating a new, watertight seal with the new garbage disposal flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lAwTK8ILk1s</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8242-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lmucX9Gijlk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Sink Drain — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>From the top side of the sink, lift the old metal sink flange out of the drain opening. Using a putty knife, carefully scrape away all of the old plumber&apos;s putty residue from the surface of the sink around the drain. After scraping, use a paper towel or a clean rag to wipe the area thoroughly, ensuring a clean, smooth surface for the new installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lmucX9Gijlk</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8242-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UI4x9GU-h6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Excess Putty — How to Replace a Bathtub Waste and Overflow Drain Assembly</video:title>
      <video:description>Once the drain flange is fully tightened, use a small screwdriver, a plastic putty knife, or your finger to wipe away the excess plumber&apos;s putty that has squeezed out around the flange. Be careful not to scratch the surface of the bathtub. A cloth can be used for the final wipe-down for a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UI4x9GU-h6E</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8231-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IkZ8BImMGEo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test System for Leaks — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>After all plumbing connections are complete and the solder has cooled, turn the main water supply back on slowly. Temporarily cap the tub spout pipe. Operate the shower valve to direct water into the tub and allow it to fill completely, up to and slightly into the overflow drain. Carefully inspect all new connections—the drain, the P-trap, and all soldered joints on the shower valve—for any drips or leaks. Once the test is successful, drain the tub and perform a final visual inspection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IkZ8BImMGEo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8231-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dQpPEudltI8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water and Check for Leaks — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Slowly turn on the shut-off valves for both hot and cold water by turning the handles to the left (counter-clockwise). Turn on the faucet and let the water run. Close the pop-up drain to fill the sink partially, then release it to test the drain connection under a full flow. Use a flashlight to carefully inspect all new plumbing connections, including the supply lines and the entire P-trap assembly, for any drips or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dQpPEudltI8</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8231-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nK6kB7a18RY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water and Test for Leaks — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Go outside and turn the main water supply back on. Return to the bathroom and check underneath the sink for any signs of leaking from the connections you just made. If it&apos;s dry, proceed to test the faucet by turning on the hot and cold water. Check that water is flowing correctly through the shower head. After testing, do one final check underneath to ensure no leaks have appeared under pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nK6kB7a18RY</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8230-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_xrkEh8jIGI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Vent Pipe and Air Admittance Valve (AAV) — How to Rough-In Plumbing for a Bathroom Vanit</video:title>
      <video:description>From the top opening of the sanitary tee, install another section of 2-inch PVC pipe vertically. This pipe serves as the vent stack. Cut it to a length that places the top end higher than the drain opening in the washing machine box. Screw the air admittance valve (AAV) onto a threaded adapter and glue it to the top of this vent pipe. The AAV will allow air to enter the drain system, preventing a vacuum from forming and siphoning water from the P-trap, while also blocking any sewer gases from escaping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_xrkEh8jIGI</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8230-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N-ktdwYu_yc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Main Drain Assembly — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Take the pre-assembled drain and vent stack and connect it to the 2-inch drain pipe stub coming out of the floor. Apply primer and cement to the floor stub and the bottom fitting of your assembly, then press them together firmly. Ensure the sanitary tee is oriented correctly, with the side branch angled slightly downwards towards the drain and facing the direction of the sink&apos;s garbage disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N-ktdwYu_yc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8230-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yOoBy5YuPmA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect the Vent Pipe — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>In the horizontal drain run under the floor, install a wye fitting. The straight-through part of the wye continues as the main drain line towards the sewer. The branch of the wye is used to create the vent. From this branch, install an elbow to turn a new pipe vertically upwards. This new vent pipe, which must be at least half the diameter of the drain it serves (e.g., a 1.5-inch vent for a 3-inch drain), is then routed into a nearby wall and connected to the main vent stack or terminated according to local code.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yOoBy5YuPmA</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8232-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sAYLyHKY55M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rough-In Faucet Plumbing — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Cut and run the hot (red PEX) and cold (blue PEX) water supply lines from the tie-in point to the wall where the faucet will be mounted. Use appropriate PEX fittings, including elbows and tees, and secure them with a PEX crimp tool. Secure the pipes and the faucet mounting connections to a wooden support brace within the wall studs to ensure the faucet is stable and properly supported.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sAYLyHKY55M</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8232-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sg__SSyPdqk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Valve and Connect PEX Supply Lines — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Align the valve with the center of the tub drain and mount it to the wood blocking using galvanized screws through the provided mounting holes. Double-check that it is level and at the correct depth. Cut the PEX tubing for the hot and cold supply lines to length. Slide a crimp ring onto each PEX pipe. Push the pipe fully onto the corresponding adapter on the valve (hot to the left, cold to the right). Position the crimp ring 1/8 to 1/4 inch from the end of the pipe and use a PEX crimping tool to secure the ring, creating a watertight connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sg__SSyPdqk</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8232-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o-UVrvWbu28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connecting PEX Supply Lines — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Connect the hot and cold water supply lines using PEX tubing. This valve has built-in PEX connections. Slide a PEX crimp ring onto the blue (cold) PEX tube, and push the tube onto the cold inlet of the valve. Position the crimp ring 1/8 to 1/4 inch from the end of the tube and use a PEX crimping tool to create a secure connection. For the hot water side, connect a 90-degree PEX fitting to a length of red (hot) PEX tubing, then connect the other end of the 90-degree fitting to the hot inlet on the valve, crimping both connections securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o-UVrvWbu28</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8234-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XzfA56hIG7U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install PEX Water Lines — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>The presenter prepares for and installs the PEX water supply lines. Using a drill with a 5/8-inch auger bit, he drills two holes through the wooden bottom plate of the wall, one for the hot and one for the cold line, aligning them below the corresponding inlets on the outlet box. He feeds the red and blue PEX pipes up through the holes. For each line, he slides a 1/2-inch stainless steel crimp ring onto the pipe. He then pushes the end of the PEX pipe fully onto the brass barb fitting of the valve. He positions the crimp ring about 1/8 of an inch from the base of the fitting. Using a PEX crimping tool, he squeezes the handles until the tool fully closes, which compresses the ring and secures the pipe to the fitting, creating a permanent, leak-proof connection. He repeats the process for the second water line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XzfA56hIG7U</video:player_loc>
      <video:duration>117</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8234-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/D-4K8wNztuY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Position PEX Tubing — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Begin by making a clean, square cut on the PEX-A tubing using a dedicated PEX cutter. A square cut is crucial for a proper seal. After cutting, feed the tubing through the pre-drilled holes in the wooden wall studs to the location where the shower valve will be mounted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/D-4K8wNztuY</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8234-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mRKznp6PPHs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Cold Water Line — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Following the same procedure as the hot water line, the cold water supply is installed. A blue PEX pipe is connected to the main cold water line using a T-fitting and a dedicated shut-off valve. All connections are secured with PEX crimp rings using the DeWalt PEX Crimper attachment on an impact driver. The blue PEX line is run alongside the red PEX line and secured to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mRKznp6PPHs</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8227-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2ei-oEKU4hY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure for a New Sink and Faucet — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Begin by identifying the type of faucet on your current sink. Use a tape measure to check the distance between the center of the hot and cold handle holes. A &apos;4-inch spread&apos; faucet, also called a centerset, has 4 inches between these points. An &apos;8-inch spread&apos; or widespread faucet has 8 inches between them. This measurement is crucial for selecting a compatible new faucet and sink. Next, measure the overall dimensions of the existing sink. Measure the depth from the back wall to the front edge; the sink in the video measures 23 inches. Also, measure the height from the floor to the top of the sink basin; the example is 32 inches. Note these measurements to find a replacement that fits the space and aligns with the existing plumbing rough-ins as closely as possible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2ei-oEKU4hY</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8227-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bbqZ12QhoY4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lavatory drain rough-in — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Install the bath lavatory drain in the center of the vanity.  The center of the drain should be approximately 18 inches above the finished floor.  Use an inch and a half sanitary tee in the vertical position. The water lines should be roughed in approximately 21 inches above the finished floor and spaced about 8 inches apart.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bbqZ12QhoY4</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8227-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gvWDK1JJXRk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position, Level, and Mark Valve — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Position the assembled valve body against the wooden support inside the wall. Use a level to ensure the valve body is perfectly level, which is critical for the final trim plate to sit straight. Check that the valve is set at the correct depth from the face of the planned finished wall, as specified by the manufacturer (shown as 63mm-80mm). Use a pencil to mark the locations for the mounting holes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gvWDK1JJXRk</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8228-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ep2kh_2W4yQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Securing, Testing, and Insulating — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Before the walls are closed, it is essential to perform final checks. Ensure every component—valves, pipes, and elbows—is rigidly fastened to the wood blocking inside the wall to prevent movement and future noise. Install plastic test caps on all shower outlets. These caps seal the system, allowing it to be filled with water or air and pressurized with a gauge to check for any leaks at the joints. This step is crucial to catch problems before they are sealed behind expensive tile work. Finally, cover the hot water supply lines with black foam pipe insulation. This minimizes heat loss, saving energy, and also helps to dampen water flow noise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ep2kh_2W4yQ</video:player_loc>
      <video:duration>161</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8228-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ec5ZIdyvfNA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch Drywall — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Once the plumbing is complete and tested for leaks, patch the wall. First, seal the plastic vapor barrier with a suitable tape. Cut the piece of drywall that was previously removed to fit snugly around the new box. Secure it to the studs with drywall screws. Bevel the edges of both the patch and the existing wall with a utility knife to create a V-groove for a stronger joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ec5ZIdyvfNA</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8228-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A5ADFInxg4s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Drywall Patch — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Once the leak is confirmed to be fixed and the area is dry, prepare for the final repair to the ceiling. Use a drill to add wood blocking or remove old screws from the joists to create a solid, clean frame for attaching the new piece of drywall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A5ADFInxg4s</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8229-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gslukvKt2pE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Glue cut piece into place — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Glue cut pipe to the p-trap and to the 45 degree fitting, then glue the assembly to the drain coming from the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gslukvKt2pE</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8229-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o0Gib81y7UM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan and Drill Drain Holes — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Assemble the PVC drain components, including the P-trap and sanitary tee, without glue to perform a dry fit. Position the assembly below the drain box to visualize the final layout. This helps determine exactly where the drain pipe will pass down through the bottom plate and where the vent pipe will go up. Use a pencil to mark the center of these locations on the wood. Then, use a drill equipped with a hole saw to cut the openings for the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o0Gib81y7UM</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8229-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pebIlA2Lyz8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Glue the Santee and Vent Riser — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Apply PVC primer to the outside of the pipe ends and the inside of the santee fitting sockets. Follow this by applying PVC cement to the same surfaces. Firmly push the santee onto the pipe sections, ensuring the side opening is oriented correctly to accept the P-trap. Then, assemble and glue the riser for the auto-vent. If necessary, use 90-degree elbows and short pieces of pipe to create an offset to position the vent in an optimal, high location within the cabinet, away from obstructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pebIlA2Lyz8</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8233-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sr0FJIIOFnw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Main Water Supply — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Before starting the repair, locate the main water shut-off valve for the house. This is often found outside, in a basement, or a utility closet. Turn the valve handle clockwise until it is fully closed. To confirm the water supply is off, open a nearby faucet, such as the outdoor hose bib shown in the video, to drain any remaining water from the pipes and verify that the flow has completely stopped.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sr0FJIIOFnw</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8233-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5J1WewbdCeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Locate the main water shut-off valve for the house, which is typically found outside near a hose spigot. Turn the handle on the valve to the off position to stop the flow of water to the entire house, preventing any water from leaking or spraying while you work on the plumbing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5J1WewbdCeQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8233-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ybe9m2jg7B4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply and Relieve Pressure — How to Rough-In Plumbing for a Bathroom Vanity</video:title>
      <video:description>Locate and turn off the main water shut-off valve for the entire house or unit. This is the most critical step to prevent flooding. Once the main valve is off, go to the sink where you are working and open the faucet to drain any remaining water and relieve the pressure in the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ybe9m2jg7B4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8219-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CshL-6Hp2AE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Disconnect Power — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>First and foremost, for safety, go to your home&apos;s circuit breaker panel and turn off the power to the electric water heater. It is critical to confirm the power is off using a voltage tester before proceeding. Once you are sure there is no power, remove the element&apos;s access cover and disconnect the two electrical wires from the screw terminals on the element.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CshL-6Hp2AE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8219-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MKC9O-WOkVU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Voltage at Ignitor Connection — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>With the ignitor disconnected, turn the heater&apos;s power switch back ON. Set your multimeter to measure AC voltage. Carefully insert the red and black probes of the multimeter into the two terminals on the control board where the ignitor was previously connected. This will measure the voltage being sent from the control board to the ignitor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MKC9O-WOkVU</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8219-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AuUwQlNbH8w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for DC Voltage — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>With the multimeter set to DC Volts, take the negative (black) probe and make a solid connection by touching it to the metal head of the ground screw you previously identified. Then, take the positive (red) probe and carefully touch it to the various electrical terminals or connection points on the water heater that you wish to test. The multimeter display will show the DC voltage present at that point.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AuUwQlNbH8w</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8220-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J-HlQ6vymIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check the thermostats — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Test the thermostats to ensure they are calling for heat. Run hot water in the house, then use an ohmmeter to verify that the thermostats are functioning correctly. Use a voltmeter to confirm the presence of electricity at the elements if the thermostats are functional.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J-HlQ6vymIM</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8220-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qCXmyhEY_k4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Lower Thermostat — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Access the lower thermostat by removing its access panel and insulation, similar to the upper one. Disconnect the power wires from the terminals. To test, set your multimeter to ohms of resistance. Touch the multimeter probes to the two terminals on the thermostat. If the water temperature at the bottom of the tank is below the thermostat&apos;s set point, the meter should show continuity (close to zero ohms). If the water is hot, the contacts should be open, and the meter should show no continuity. If the thermostat gives an opposite reading or no reading at all, it is defective and needs to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qCXmyhEY_k4</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8220-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZtnJCn-oxgc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reset Tripped Thermostat — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>If your test shows power at the input terminal but no power at the output terminal, the thermostat&apos;s safety switch has likely tripped. To reset it, locate the red button labeled &apos;RESET&apos;. Take a small screwdriver and press this button firmly into the thermostat until you hear or feel it click. This action resets the safety cutout. After resetting, you should re-test the output terminal with the voltage tester to confirm that power is now flowing to the heating element.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZtnJCn-oxgc</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8218-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kaxp90o8FFc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power Supply — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>If the water heater is gas-powered, turn the gas shutoff valve to the &apos;off&apos; position. If it&apos;s electric, go to the breaker panel, locate the breaker that controls the water heater (usually labeled), and switch it off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kaxp90o8FFc</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8218-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TNi9w4bAdRk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power and Verify — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Before beginning any work, locate the circuit breaker that controls the water heater in your home&apos;s electrical panel. Flip the breaker switch to the &apos;OFF&apos; position. To be certain the power is off, use a multimeter. Remove the electrical junction box cover on top of the water heater. Set your multimeter to measure AC voltage (a setting of 600V or higher is appropriate). Test for voltage by placing one probe on a hot wire (black or red) and the other on the ground wire (green or bare copper). Repeat for the other hot wire. Finally, test between the two hot wires. In all cases, the multimeter should read zero volts, confirming that the power is safely disconnected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TNi9w4bAdRk</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8218-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NNJEGX4AApo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>The first step shown is to ensure the tankless water heater is safely de-energized. This is accomplished by locating the main electrical panel for the house, identifying the circuit breaker that supplies power to the water heater, and flipping the breaker switch to the &apos;OFF&apos; position. The presenter notes that while some instructions might vary, turning off the power is the safest practice before proceeding with the plumbing work.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NNJEGX4AApo</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8221-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Suf9o2w5ilw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect for Leaks — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>After restoring power and water, check the pressure relief valve to ensure it is no longer dripping. The video recommends checking again after 24 hours of normal use, including showers, to confirm the fix is permanent. If the area remains dry, the issue is resolved. You can now close the water heater access panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Suf9o2w5ilw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8221-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_av14foX-MY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Verify — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>After completing repairs, turn on the water supply and reconnect the power. Test the water heater to ensure the loud noise is gone.  If it persists, contact a professional.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_av14foX-MY</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8221-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AgkgCq946UI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify the Repair — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Turn the temperature dial on the control unit to activate the water heater. Wait for the unit to cycle on. The power vent fan will start, and the status light should now indicate normal operation, confirming the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AgkgCq946UI</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8222-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CFaht-zYZ6k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Old Thermostats — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Carefully loosen the terminal screws on the old thermostat where the wires are connected. Once loose, pull the wires free. Note the position of each wire. After the wires are disconnected, the thermostat itself can be unclipped from the metal bracket holding it against the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CFaht-zYZ6k</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8222-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yh8omS9oLTE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Panels and Insulation — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Once both thermostats are set, place the insulation back over each one. Re-attach the upper and lower access panels, securing them with the screws. Tighten the screws until they are snug, but be careful not to overtighten them, as this can strip the threads in the heater&apos;s thin metal jacket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yh8omS9oLTE</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8222-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BEd9BG_c0EI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Valve — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Mount the thermostatic mixing valve onto the water pipes according to the manufacturer&apos;s manual. Ensure it is oriented correctly with the hot and cold water inlets properly aligned. The valve should be firmly attached to the piping system to ensure a stable and secure installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BEd9BG_c0EI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8223-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/P-HZpZQCBf8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose the Problem — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>First, ensure the power to the water heater is turned off at the circuit breaker. Remove the metal access panel covering the thermostat and element. Use a multimeter set to AC voltage to test the two main power wires coming into the thermostat to confirm power is off. Once confirmed, proceed to test the components. Check for voltage from the main power terminals, then test the output terminals on the thermostat that lead to the element. If there&apos;s power to the thermostat but not to the element, the thermostat is likely faulty. If there&apos;s power going to the element but it&apos;s not heating, the element is faulty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/P-HZpZQCBf8</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8223-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LUvLBkX6FEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Testing for Voltage at the Thermostat — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>The technician guides the customer to test for voltage. The customer places the black probe on the metal casing for a ground and uses the red probe to test the terminals. They find 123V AC power on the input side of the thermostat but no power on the output side that leads to the heating element. This indicates the thermostat is open.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LUvLBkX6FEY</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8223-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TNi9w4bAdRk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Upper Heating Element — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>To test the upper heating element, first remove the access panel and the insulation behind it. Then, remove the plastic cover over the thermostat. Disconnect the two wires from the element&apos;s screw terminals. Set your multimeter to the lowest resistance setting (Ohms, Ω). Touch the probes to the two element screws. A good element will show a reading between 12-20 ohms (the video shows 17.2 ohms). Next, set the multimeter to the highest resistance setting (e.g., 200kΩ) to check for a ground fault. Touch one probe to one of the screws and the other probe to the metal tank body. Repeat for the other screw. A reading of infinity (often shown as &apos;1&apos; or &apos;O.L.&apos; on a digital meter) indicates the element is not grounded and is good. If you get a resistance reading, the element is faulty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TNi9w4bAdRk</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8224-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FuBoRRojKcA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Thermostat — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Remove the old thermostat. Remove old thermostat and old clip. Compare old thermostat to new unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FuBoRRojKcA</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8224-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FuBoRRojKcA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen Clips — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Loosen the clips holding the thermostat in place. The thermostat may be held in place by a plastic or metal ring. Use a screwdriver to gently loosen these clips, allowing you to rotate the ring and remove the thermostat. Note that on older models, the ring was made of metal instead of plastic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FuBoRRojKcA</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8224-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PG_u5l7RQwU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Thermostat — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>With the cover off, you will see the thermostat, which has wires connected to it and a long probe extending into the tank. Grasp the head of the thermostat firmly and pull it straight out of its sheath in the immersion heater assembly. This action disconnects the thermostat and provides unobstructed access to the two primary terminals of the heating element for testing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PG_u5l7RQwU</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8225-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JCl-3mulQWw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Access Panel — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Move to the water heater and locate the upper access panel. These are typically rectangular raised sections on the side of the tank. Using a Phillips head screwdriver, remove the screw that secures the panel to the tank. Once the screw is out, carefully pull the panel off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JCl-3mulQWw</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8225-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IkU9QnXUgmw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Upper Access Panel and Insulation — How to Test and Replace an Electric Water Heater Thermost</video:title>
      <video:description>Locate the upper access panel on the front of the water heater tank. Use your fingers to gently pry and remove the plastic or metal cover. Behind this cover, you will find a piece of pre-cut foam insulation. Carefully pull the insulation straight out to reveal the thermostat assembly and its wiring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IkU9QnXUgmw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8225-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HpXLT6lpS-Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Screws For Lower Cavity Cover — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Using a #2 Phillips head screwdriver, remove the two screws that secure the lower cavity cover on the side of the water heater tank. One screw is at the top of the cover, and the other is at the bottom. Once the screws are removed, gently pull the cover away from the tank to expose the internal insulation and wiring compartment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HpXLT6lpS-Y</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8226-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q34HJtH30Vs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access the Heating Elements — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>Using a screwdriver, remove the screws securing the upper and lower access panels on the front of the water heater. Set the panels and screws aside. Carefully pull out the pieces of fiberglass insulation that are behind the panels. Finally, remove the plastic safety guard that covers the thermostat and the element&apos;s terminal screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q34HJtH30Vs</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8226-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ymY86Wf_Xns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access the Upper Thermostat — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>The technician locates the two access panels on the side of the electric water heater. Using a Phillips head screwdriver, he removes the screw from the upper access panel, takes the panel off, and places it on the floor. He then pulls back the piece of foam insulation to reveal the upper thermostat and its wiring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ymY86Wf_Xns</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8226-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rz_7bndubIQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Restore Gas — How to Test and Replace an Electric Water Heater Thermostat</video:title>
      <video:description>With the new thermocouple installed, carefully slide the entire burner assembly back into its housing at the bottom of the water heater. Once it is properly seated, locate the main gas supply valve for the water heater and turn it back to the &apos;on&apos; position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rz_7bndubIQ</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8212-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6oVsISlka2A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect P-Trap — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Place a bucket directly under the U-shaped section of the drain pipe, known as the P-trap. Using a pair of channel-lock pliers, grip the large slip nuts securing the trap on both the vertical tailpiece from the sink and the horizontal drain arm extending from the wall. Turn the nuts counter-clockwise to loosen them. Once loose, you should be able to finish unscrewing them by hand. Carefully lower the P-trap and empty its contents (water and any debris) into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6oVsISlka2A</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8212-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eDCwcI2dpkM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the P-Trap — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>If plunging fails, check the P-trap under the sink. Place a bucket underneath to catch water and gunk. If the trap has a plug or can be unscrewed, remove it. Use a plumber&apos;s snake to poke into the open pipe and clear out any debris. Once clear, securely reassemble the trap. Be extremely cautious if you have previously used chemical drain cleaners.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eDCwcI2dpkM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8212-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NuiaqKXdcqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Old P-Trap Removal — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Begin by placing a large bucket or basin directly underneath the existing P-trap to catch any water that will be released upon disassembly. Using a pair of channel-lock pliers, grip the slip-joint nuts connecting the P-trap to the vertical tailpiece from the sink and the horizontal drain arm going to the wall. Turn the nuts counter-clockwise to loosen them. Once loose, finish unscrewing them by hand and carefully lower the P-trap, allowing the trapped water to drain into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NuiaqKXdcqg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8214-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2fBcmqXW20o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Clog and Add Water — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>First, identify the clogged drain in the double-basin sink, which will have standing water. The other side should drain normally. Before plunging, ensure there are a few inches of water in the clogged basin, enough to fully submerge the rubber cup of the plunger. This is essential for creating the necessary pressure to dislodge the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2fBcmqXW20o</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8214-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SvhcCJ86_K8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attempt to Unclog with a Plunger — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>With the overflow plugged, use a small, accordion-style plunger designed for sinks. Submerge the plunger cup in the standing water, ensuring it forms a tight seal over the drain opening. Vigorously push down and pull up on the plunger handle. This action creates alternating pressure and suction in the drainpipe, which is intended to break up and dislodge the clog. Continue this motion for about a minute. In the video, this action brings up some debris but does not fully clear the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SvhcCJ86_K8</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8214-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xZPRE9FFthQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>plunge drain — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Use a plunger to loosen the clog. Insert the plunger into the drain opening and ensure a tight seal. Pump the plunger vigorously up and down for several minutes. This action creates pressure that can help dislodge the blockage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xZPRE9FFthQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8215-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kQoV46AAfAE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear the Blockage — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>With the snake inserted, the plumber activates the tool, causing the cable to rotate and advance into the pipe. He pushes and pulls the cable back and forth to work it through the drain line. You may feel resistance when you hit the clog. Continue working the snake until the standing water begins to drain, indicating the blockage has been broken up. Once the main clog is cleared, continue to run the snake further down the line to ensure the pipe is fully cleared.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kQoV46AAfAE</video:player_loc>
      <video:duration>113</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8215-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BCluosD26ug/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Operate the Powered Auger — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>With the cable at the P-trap, activate the drum snake&apos;s motor to begin rotating the cable. The model shown has a forward or &apos;up arrow&apos; setting that advances the cable while it spins. Apply steady, gentle forward pressure on the tool to help the rotating auger head navigate through the bends of the trap and break apart the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BCluosD26ug</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8215-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z_D-Zksmgc8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Snake the Drain Pipe — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Now that the auger is extended, you are working in the drain pipe past the toilet itself. Continue the process of turning the crank handle while applying gentle pressure. You can work the snake back and forth to break up any stubborn clogs or to hook onto an obstruction to pull it back out. Turn the crank handle to clear the walls of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z_D-Zksmgc8</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8216-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x2T4iT_pkws/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Test and Cleanup — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>With the auger fully removed, inspect the tip for any pulled-back debris, such as hair. Run a strong stream of hot water down the drain for a minute or two to flush out any remaining loose particles. Finally, look under the sink to ensure no connections on the P-trap have been loosened and that there are no leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x2T4iT_pkws</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8216-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A5G3lQXtBCQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Check for Leaks — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Turn on the faucet and let the water run for a minute to test the drain flow and check for any leaks. Carefully inspect all the connections you just tightened, including both slip nuts on the P-trap and the pivot rod retaining nut, to ensure they are dry. If everything is dry and the water drains quickly, the job is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A5G3lQXtBCQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8216-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nmJ1bq5GLTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks and Drain Flow — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Turn on the water and let it run for a while to fill the sink and P-trap. Check underneath for any leaks at the slip nuts and the pivot rod nut. Observe the drain to ensure water is flowing quickly and not backing up, confirming the clog has been successfully cleared.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nmJ1bq5GLTk</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8211-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3USfrjDcLhY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Disassembly — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Begin by identifying the P-trap, the U-shaped section of pipe directly beneath the sink drain. Before disassembly, place a bucket or a small pot underneath the P-trap. This is crucial for catching the water that is held within the trap, as well as any loose debris, preventing a mess on your cabinet floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3USfrjDcLhY</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8211-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7o2G2dqKgWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Workspace — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Before starting the disassembly, place a towel on the bottom of the vanity cabinet directly under the P-trap. Then, place a small bucket or container on top of the towel to catch any water that will spill out when the P-trap is removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7o2G2dqKgWI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8211-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a9AiyGy8_eU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the P-Trap — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>To begin, place a bucket or container directly under the sink&apos;s P-trap assembly to catch any water or debris that will spill out during disassembly. Then, wearing gloves, use your hands to loosen and unscrew the slip nuts connecting the P-trap to the sink&apos;s tailpiece and the drain pipe in the wall. Carefully remove the P-trap sections and place them in the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a9AiyGy8_eU</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8213-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6z3e3oobOpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Boil Water &amp; Salt and Pour in Sink — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>The first step is to create a solution to melt the ice in the frozen pipe. Fill a pot with water and place it on a stove to heat. Once the water reaches a rolling boil, carefully add a generous amount of salt. The salt helps to lower the freezing point of water, which will assist in melting the ice more effectively. After adding the salt, turn off the stove and carefully transport the pot to the affected sink. Slowly pour the hot salt water solution directly down the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6z3e3oobOpQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8213-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eJZubEv9p5M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run Hot Water — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Before beginning to wash any greasy pans or dishes, turn on the hot water tap at the kitchen sink. Allow the water to run for a minute or so until it reaches its maximum temperature. This step ensures the water is hot enough to effectively dissolve the grease upon contact and also begins to warm the drain pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eJZubEv9p5M</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8213-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YhTwjjXP2PA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Activate and Wait — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Slowly and carefully pour a small amount of hot water into the drain, just enough to dissolve the crystals and start the chemical reaction. You may hear fizzing or sizzling as the product works. Allow the drain opener to sit in the drain and work on the clog for several minutes, as recommended by the product&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YhTwjjXP2PA</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8217-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/51I4TNqA5mk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Alternative Method: Baking Soda and Vinegar — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>Another alternative method involves using baking soda and vinegar. Start by sprinkling one cup of baking soda around the base of the toilet bowl. Next, slowly pour in a few cups of vinegar. The mixture will begin to fizz and bubble immediately. This chemical reaction can help break up and dissolve the clog. You should let this mixture sit for half an hour or longer before attempting to flush the toilet. This gives the reaction time to work on the blockage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/51I4TNqA5mk</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8217-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LGhSNIPtsEA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush Drain with Boiling Water — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>After the Drano has cleared the initial blockage and the sink has drained, boil a large pot of water. Carefully pour the boiling water down the drain to flush out any remaining debris and chemical residue. Run the faucet with hot water to ensure the drain is flowing freely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LGhSNIPtsEA</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8217-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6a7oRpeIDJQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Flush with Boiling Water — How to Clear a Grease-Clogged Kitchen Drain</video:title>
      <video:description>After letting the baking soda and vinegar mixture sit, boil a second pot of water. Carefully pour this final pot of boiling water down the drain. This will flush out the loosened debris and any remaining cleaning solution, leaving your drain clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6a7oRpeIDJQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8197-1</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8R4BQGrIVzg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle and Trim Plate — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Using an Allen wrench (not shown but typically required), loosen the set screw on the faucet handle and pull it off. Then, using a Phillips head screwdriver, remove the two screws securing the large decorative trim plate, or escutcheon. Carefully pull the escutcheon away from the wall to expose the shower valve body and the cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8R4BQGrIVzg</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8197-2</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eog9Xa2fD6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>To remove the faucet handle, first, locate the small decorative button that covers the set screw. Pry this button off, which may require a small flathead screwdriver. Then, insert an Allen wrench into the exposed set screw and turn it counter-clockwise to loosen it. You do not need to remove the screw completely. Once loose, lift the handle straight up and off the faucet stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eog9Xa2fD6c</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8197-3</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1F7vaI-6ct4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>To remove the faucet handle, first use a small, flathead screwdriver to carefully pry off the decorative cap located on the side of the handle. This will expose a set screw. Insert an Allen wrench into the set screw and turn it counter-clockwise to loosen it. You do not need to remove the screw completely. Once loose, pull the handle straight up and off the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1F7vaI-6ct4</video:player_loc>
      <video:duration>88</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8196-1</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x4x1BN9XddM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain and Disassemble Old Faucet — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>First, shut off the main water supply to the bathroom or the entire house. Turn on the hot and cold faucet handles to drain any residual water from the pipes and the valve body. Use a screwdriver to pry off the decorative caps on the faucet handles, then unscrew and remove the handles themselves. The escutcheons (trim plates) can then be unthreaded or pulled off to expose the valve stems in the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x4x1BN9XddM</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8196-2</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GQ1DRy7Lkpo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Replacement — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Before beginning the replacement, shut off the main water supply to the house using the main shutoff valve. Then, go to a faucet (preferably on an upper floor) and open it to drain the remaining water and relieve pressure in the pipes. Place a bucket under the PRV to catch any water that will spill out during removal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GQ1DRy7Lkpo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8196-3</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5KGt9k2npKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Line — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>First, ensure the main water is shut off. Place a bucket under the existing angle stop to catch any remaining water. Disconnect the water supply line from the toilet and open the valve, allowing the water to drain completely into the bucket. Once drained, close the valve and place a rag on the floor to absorb any spills.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5KGt9k2npKA</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8198-1</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Yq3kGql3fAY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Bathtub Perimeter — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>To remove the bathtub without damaging the walls, use a reciprocating saw to cut around the perimeter of the tub. The cut should be made approximately 1.5 inches away from the tiled walls. This cut severs the main basin of the tub from its mounting flange, which is tucked behind the drywall and tile.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Yq3kGql3fAY</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8198-2</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rkX7O-lLVwU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Removing Trim and Surround Panels — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>The demolition starts by removing the trim and the tub surround panels. The presenter explains that he will start taking everything apart, including the covers for the plumbing trim. He demonstrates pulling the side trim pieces away from the wall, noting they are often brittle and hard to remove without breaking. He cautions that the removed fiberglass panels can have extremely sharp edges.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rkX7O-lLVwU</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8198-3</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZazSVBiJfoI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demolish the Tub Surround — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>To begin, you must remove the wall covering around the bathtub to access the tub&apos;s mounting flange. Start by using a hammer and chisel to carefully chip away the bottom row of tiles adjacent to the tub. Once the tiles are removed, use a rotary tool like a Dremel to score a clean line on the drywall above the tile you intend to remove. This will allow for a cleaner demolition. Finally, use a hand saw, such as a drywall saw, to cut along the scored line and through the drywall just above the tub&apos;s flange, exposing the wall studs and freeing the tub from the walls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZazSVBiJfoI</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8199-1</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3muU-hTUL7o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Drain and Overflow Assembly — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Assemble the new bath waste and overflow drain kit. From inside the tub, insert the stopper linkage into the overflow opening while holding the overflow pipe assembly against the back of the tub. Secure the overflow faceplate with screws. From below, attach the bath tee to the overflow pipe and then connect the bath shoe to the tee, ensuring proper alignment with the drain hole. Use gaskets at all connection points. Finally, install the P-trap and connect the entire assembly to the main drain line in the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3muU-hTUL7o</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8199-2</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IkZ8BImMGEo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Tub Drain — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Assemble the Gerber trip-lever tub drain. Apply a ring of plumber&apos;s putty under the flange of the drain shoe. From inside the tub, insert and tighten the drain shoe into the drain elbow below using a drain wrench. Connect the overflow pipe to the overflow elbow and attach the trip-lever faceplate, ensuring the linkage is adjusted to the correct length to allow the stopper to open and close properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IkZ8BImMGEo</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8199-3</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NiRZBKGg2ek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten Drain Assembly — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Insert the sealed drain shoe assembly from underneath the tub, pressing it against the drain opening. From inside the tub, screw the drain strainer into the drain shoe. Use a drain wrench, with a screwdriver inserted through it for leverage, to tighten the strainer firmly. This compresses the gasket and creates the seal. Return underneath and use channel-lock pliers to tighten the slip nut connecting the horizontal pipe to the overflow assembly. As a final precaution, apply sealant around the exterior seam where the drain shoe flange meets the bottom of the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NiRZBKGg2ek</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8200-1</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PZFHGUdDEZo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Trim and Inspect Fasteners — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Begin by removing any trim or surround panels that are attached to the top lip of the bathtub. These are often screwed or nailed into the wall studs. A pry bar can be used to gently remove these pieces. Inspect the lip for any screws holding the tub to the studs and remove them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PZFHGUdDEZo</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8200-2</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tk6DRNyBe1g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Drywall Around Surround — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>To access the nailing flange that secures the shower surround to the wall studs, you must cut away a strip of drywall around the perimeter of the stall. Using an oscillating multi-tool with a wood/metal cutting blade, carefully cut along the edge of the surround, about an inch and a half away from the corner. This will expose the flange without damaging the surrounding wall excessively. Wear a dust mask and safety glasses for this step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tk6DRNyBe1g</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8200-3</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1UNExfvVWFs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Stub-Out — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Align the copper stub-out&apos;s nailing flange with the marked position on the wooden wall stud. Using a power drill equipped with a screwdriver bit, drive screws through the holes in the flange and into the stud. This action secures the stub-out assembly, preventing it from moving. After fastening, check the adapter to confirm it is sturdy and solidly mounted to the framing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1UNExfvVWFs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8201-1</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dz2UKy3Awiw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Remove Drywall — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Use a straightedge to mark a cut line on the drywall just above the tub surround&apos;s flange. With an oscillating multi-tool, carefully cut along this line. Then, use a hammer and pry bar to break apart and remove the sections of drywall above the tub on all three sides, fully exposing the flange and the screws holding it to the studs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dz2UKy3Awiw</video:player_loc>
      <video:duration>159</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8201-2</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YPRM57yc_UU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Valve to Bathtub Plumbing — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Access the plumbing behind the bathtub through the access panel. Identify the hot and cold water supply lines. Cut the existing CPVC pipes to insert T-fittings. Using CPVC primer and cement, glue the T-fittings into the hot and cold lines. Connect short pieces of CPVC pipe and elbows as needed to route the water from the T-fittings to the corresponding hot (H) and cold (C) inlets of the thermostatic mixing valve. Connect the mixed water outlet (marked &apos;MIX&apos; or similar) of the valve to the bathtub faucet&apos;s water supply line. Ensure all connections are secure and allow the cement to fully cure as per the manufacturer&apos;s instructions before turning on the water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YPRM57yc_UU</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8201-3</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZazSVBiJfoI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demolish the Tub Surround — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>To begin, you must remove the wall covering around the bathtub to access the tub&apos;s mounting flange. Start by using a hammer and chisel to carefully chip away the bottom row of tiles adjacent to the tub. Once the tiles are removed, use a rotary tool like a Dremel to score a clean line on the drywall above the tile you intend to remove. This will allow for a cleaner demolition. Finally, use a hand saw, such as a drywall saw, to cut along the scored line and through the drywall just above the tub&apos;s flange, exposing the wall studs and freeing the tub from the walls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZazSVBiJfoI</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8202-1</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Yq3kGql3fAY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Remaining Flange — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>After removing the main tub basin, a small strip of the tub&apos;s flange will remain behind the wall. Use a hammer to tap these leftover pieces downwards. The force will cause them to break or bend, allowing you to easily pull them out from under the tile and drywall without causing damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Yq3kGql3fAY</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8202-2</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2HFv3Xp1bBU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Tub from Alcove — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>Now, free the tub from the framing. The tub is likely resting on a ledger board and may be nailed or bracketed to the studs. Use a reciprocating saw to cut the ledger board and any accessible studs or framing pieces holding the tub in place. Cut any nails connecting the tub&apos;s flange to the studs. Once all supports are cut, pry and twist the tub to break it completely free. The tub shown was a fiberglass whirlpool model, which is lighter than cast iron but still awkward. Once loose, lift and pull the tub out of the alcove.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2HFv3Xp1bBU</video:player_loc>
      <video:duration>116</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8202-3</loc>
    <lastmod>2026-10-07T14:16:48.013Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2ya9HdSyU6s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Wall and Tub — How to Remove an Old Bathtub for a Bathroom Remodel</video:title>
      <video:description>After the tub is perfectly positioned and the drain is securely connected, finalize the installation. Push the modified wall back into its original position and reattach the studs to the sole plate with fasteners. Add any additional support blocks under the tub flange as needed. Finally, patch the drywall that was cut out to complete the structural repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2ya9HdSyU6s</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-07T14:16:48.013Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8194-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MG6vdRBWl_U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Flush Valve Seal — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toile</video:title>
      <video:description>Without turning off the water, reach your hand into the toilet tank. Locate the large, central flush valve assembly. Insert your finger into the opening at the bottom of the flush valve where the water drains into the bowl. You will feel a rubber flapper or seal. Wiggle your finger around this seal to dislodge any dirt, scale, or debris that might be preventing it from seating correctly. You should hear the sound of running water stop once the seal is clear and properly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MG6vdRBWl_U</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8194-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rwyLPWaxO_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flapper — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>Take the new flapper and position it over the drain opening. Connect the ears of the flapper onto the pegs at the base of the overflow tube, ensuring it sits securely. Attach the new lift chain to the flush lever arm. Adjust the chain so there is only a small amount of slack (about 1/2 inch) when the flapper is closed to ensure it can lift fully when flushed but also close completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rwyLPWaxO_E</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8194-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/13Rhla3uxx8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Clean the Flapper Assembly — How to Replace a Toilet Flapper to Fix a Running or Weak Fl</video:title>
      <video:description>Take the removed valve assembly and inspect the flapper and moving parts for any damage or debris buildup. Using a bucket of water mixed with mild dish soap and a sponge, thoroughly clean the assembly. Scrub away any grease or solids to ensure the flapper can move freely and the valve can seat properly to create a tight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/13Rhla3uxx8</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8195-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SiaEV5htSjA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalize and Test — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>Turn the water supply valve counter-clockwise to allow water to fill the tank. Wait for the tank to fill completely; the fill valve will shut off automatically. Once full, test the system. Press the small button (top section) for a half flush and observe the water level drop slightly. Press the large button (bottom section) for a full flush and see the water level drop significantly. Check for any leaks around the base. Finally, place the tank lid back on the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SiaEV5htSjA</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8195-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yqvYETwHFhY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Water On and Test — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>With the fill valve fully reassembled, it&apos;s time to test the repair. Turn the water supply valve counter-clockwise to turn the water back on. The tank will begin to fill. Watch and listen as the water level rises. Once the tank is full, the float will rise and shut off the water. Listen carefully to confirm that the hissing noise is gone. The toilet should now be silent.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yqvYETwHFhY</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8195-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TJ5yho7WVJ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>Carefully place the flush valve assembly back onto its base in the tank. Twist it (clockwise) to lock it securely into place. Turn the water supply back on and allow the tank to fill completely. Test the toilet by flushing it. Observe the water in the bowl to ensure it stops running after the tank has refilled. If the leak is gone, the repair is successful. Place the tank lid back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TJ5yho7WVJ8</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8190-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IqeoINJfrFU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Tank — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>Begin by turning off the water supply to the toilet. The shut-off valve is typically located on the wall behind or next to the toilet. Turn the valve clockwise until it stops. Next, flush the toilet and hold the flush lever down to drain as much water as possible from the tank. Place a sponge or towel on the floor below the connections to catch any remaining water drips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IqeoINJfrFU</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8190-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dG8YJjNu78Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Toilet Tank — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>To begin, shut off the water supply to the toilet by turning the shut-off valve, typically located on the wall behind the toilet. Flush the toilet and hold the handle down to drain as much water as possible from the tank. Use a large sponge or towel to soak up and remove any remaining water from the bottom of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dG8YJjNu78Q</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8190-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PUVssZsSbPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing To</video:title>
      <video:description>Begin by turning the water supply valve clockwise to shut off the water to the toilet. Next, flush the toilet and hold the handle down to drain as much water as possible from the tank. Use a sponge to soak up and remove any remaining water from the bottom of the tank. Place a bucket or container on the floor underneath the tank&apos;s connections to catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PUVssZsSbPw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8191-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ixVZgNDxA5M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Flapper and Chain — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>First, visually inspect the flapper to ensure it is sitting correctly and creating a seal over the flush valve opening. Next, check the chain connected to the flapper and the flush lever. If the chain is too tight, it will pull the flapper up slightly, preventing it from sealing completely. If it is too tight, loosen it by moving the clip to a different link on the chain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ixVZgNDxA5M</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8191-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vSvUehDCdwc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Flapper — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>Take the new flapper and attach its mounting arms to the corresponding posts on the flush valve, one side at a time. Ensure they are securely clipped on. Next, connect the clip on the end of the new flapper&apos;s chain to the trip lever arm. Adjust the chain length so there is approximately a quarter-inch of slack when the flapper and flush handle are in their resting, closed positions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vSvUehDCdwc</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8191-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-29PWYVsb3w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Chain and Test Flush — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toil</video:title>
      <video:description>Attach the hook at the end of the flapper chain to one of the holes on the new handle&apos;s lever arm. Adjust it so there is only about a half-inch of slack in the chain. Once connected, press the handle to test the flush. Watch to ensure the flapper lifts fully and then drops back down to create a proper seal after the tank empties.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-29PWYVsb3w</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8192-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ma_BA4gtrvM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Flapper — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>To remove the old flapper, first unhook the chain from the flush lever arm. Then, locate the two small &apos;ears&apos; or rings on the sides of the flapper. These ears are hooked over two vertical posts on the sides of the flush valve tube. Gently flex the ears and slip them off the posts. You can now lift the old flapper out of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ma_BA4gtrvM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8192-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J02uYyiZDkU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unhook the Chain from the Flush Lever — How to Replace a Toilet Flapper to Fix a Running or Weak Flu</video:title>
      <video:description>After disconnecting the flapper from the overflow tube, trace its chain upwards to where it connects to the flush handle lever. The chain is attached to the lever arm with a small metal clip. Carefully unhook this clip from the lever to completely free the old flapper assembly, then lift it out of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J02uYyiZDkU</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8192-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SiaEV5htSjA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Flush Handle and Flapper — How to Replace a Toilet Flapper to Fix a Running or Weak Flush</video:title>
      <video:description>Inside the now-empty tank, unhook the metal or plastic chain from the flush handle&apos;s lever arm. Next, locate the plastic nut on the inside of the tank that secures the flush handle. Unscrew this nut (it is reverse-threaded, so turn it clockwise to loosen) and remove the old handle assembly. Finally, unhook the old rubber flapper from the two small pegs at the base of the overflow pipe and lift it out of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SiaEV5htSjA</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8193-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OdyPZOKBqTU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flapper and Test — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toi</video:title>
      <video:description>Take the new flapper and position it over the flush valve. Clip the two ears onto the same posts from which you removed the old one. Attach the new chain to the flush lever arm. Adjust the chain length so that there is only about a half-inch of slack. Turn the water supply valve back on (counter-clockwise) and allow the tank to fill. Test the flush to ensure it works correctly and check for any continued leaking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OdyPZOKBqTU</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8193-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zVu6nV-LzF4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace an Incorrect Flapper — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toi</video:title>
      <video:description>If your flapper is not adjustable, a double flush indicates you have the incorrect model for your toilet. You must replace it. To do this, unhook the chain from the flush handle lever inside the tank. Then, unclip the old flapper&apos;s &apos;ears&apos; from the two pegs on the sides of the flush valve overflow tube. Install the new, correct flapper by reversing the process: clip the new flapper&apos;s ears onto the flush valve pegs and attach the chain to the flush handle lever, leaving only a little slack.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zVu6nV-LzF4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8193-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ixVZgNDxA5M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Flapper and Chain — How to Replace a Toilet Flapper to Fix a Running or Weak Flushing Toilet</video:title>
      <video:description>First, visually inspect the flapper to ensure it is sitting correctly and creating a seal over the flush valve opening. Next, check the chain connected to the flapper and the flush lever. If the chain is too tight, it will pull the flapper up slightly, preventing it from sealing completely. If it is too tight, loosen it by moving the clip to a different link on the chain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ixVZgNDxA5M</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8160-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/krcykKS6Yhc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hand-Tighten Shower Arm — How to Replace a Shower Arm</video:title>
      <video:description>Begin threading the new shower arm into the prepared wall fitting by hand. Screw it in a clockwise direction until it is as tight as you can get it with only your hands. At this point, the arm will likely not be in its final, downward-pointing position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/krcykKS6Yhc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8160-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aTRqWM0VcxY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Extension Arm — How to Replace a Shower Arm</video:title>
      <video:description>Prepare the new extension arm for installation. Wrap plumber&apos;s tape clockwise around the threads on both ends of the new arm. Insert the arm into the wall fitting and hand-tighten it clockwise. Use a screwdriver for leverage to fully tighten it. Once secure, slide the escutcheon flange up against the wall to cover the opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aTRqWM0VcxY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8160-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i4-Sn4nwHgI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Align the Extension Arm — How to Replace a Shower Arm</video:title>
      <video:description>Screw the shower extension arm onto the taped pipe threads by rotating the entire arm clockwise. Tighten it until it is snug and stops in the desired vertical alignment. The added thickness of the Teflon tape will create enough friction to hold the arm in place without it being fully bottomed out on the threads. If it becomes tight too early or too late, you will need to remove it and adjust the number of tape layers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i4-Sn4nwHgI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8164-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iUuNzMOB2v4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing the Main Assembly onto the Shower Arm — How to Replace a Shower Arm</video:title>
      <video:description>Wrap the threads of the shower arm pipe coming from the wall with the provided thread seal tape. Wrap it in a clockwise direction several times to ensure a good seal. Then, take the assembled diverter and extension arm unit and screw it onto the taped shower arm. Hand-tighten firmly to secure it in place and create a leak-proof connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iUuNzMOB2v4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8164-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HlUepuUozLs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Replace a Shower Arm</video:title>
      <video:description>Turn on the shower valve to run water through the newly installed showerhead. Carefully inspect the connection point between the showerhead and the shower arm for any drips or leaks. If a leak is present, turn off the water and tighten the showerhead slightly more. If it persists, you may need to remove it and re-apply the Teflon tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HlUepuUozLs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8164-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aTPuaXEvzmM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install_New_Shower_Arm — How to Replace a Shower Arm</video:title>
      <video:description>With the broken piece removed, prepare the new shower arm for installation. Wrap Teflon tape around the threads of the new shower arm in a clockwise direction. This ensures a watertight seal when screwed into the fitting. Insert the arm into the wall fitting and hand-tighten it by turning it clockwise until it is snug and angled correctly. Place the escutcheon plate over the pipe and slide it flush against the wall to cover the opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aTPuaXEvzmM</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8159-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UneR27Cnr2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Shower Arm — How to Replace a Shower Arm</video:title>
      <video:description>The plumber prepares a new, longer shower arm for installation. He wraps the threads with Teflon tape and applies pipe dope over it to ensure a leak-proof seal. He hand-threads the new arm into the wall fitting, then uses the handles of a pair of channel-lock pliers inserted into the arm&apos;s opening to get leverage for the final tightening. He then screws the shower head onto the newly installed arm.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UneR27Cnr2c</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8159-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aTPuaXEvzmM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install_New_Shower_Arm — How to Replace a Shower Arm</video:title>
      <video:description>With the broken piece removed, prepare the new shower arm for installation. Wrap Teflon tape around the threads of the new shower arm in a clockwise direction. This ensures a watertight seal when screwed into the fitting. Insert the arm into the wall fitting and hand-tighten it by turning it clockwise until it is snug and angled correctly. Place the escutcheon plate over the pipe and slide it flush against the wall to cover the opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aTPuaXEvzmM</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8159-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YJ_dFZ3NuJA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Wall and Install Adapter — How to Replace a Shower Arm</video:title>
      <video:description>First, remove the existing shower head and arm from the wall pipe. Next, choose the correct length adapter from the kit to ensure the panel&apos;s connection point will be accessible. Wrap the threads of the chosen adapter with Teflon tape in a clockwise direction, then apply pipe sealant over the tape. Screw the adapter into the shower outlet in the wall and tighten it firmly with channel-lock pliers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YJ_dFZ3NuJA</video:player_loc>
      <video:duration>101</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8163-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K4Qxci-eRbo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Existing Showerhead — How to Replace a Shower Arm</video:title>
      <video:description>Begin the removal process by unscrewing the existing showerhead from the old shower arm. Grasp the showerhead firmly and turn it counter-clockwise. In most cases, it can be removed by hand. If it is stuck, you may need to use pliers, but be sure to protect the finish with a towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K4Qxci-eRbo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8163-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0Hjl4nbtNcA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Showerhead — How to Replace a Shower Arm</video:title>
      <video:description>To begin, remove the old showerhead from the shower arm. Grasp the showerhead firmly with your hand and twist it in a counter-clockwise direction to unscrew it. If it is difficult to turn by hand, you can use a towel to get a better grip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0Hjl4nbtNcA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8163-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/drig_Fq5S9w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Existing Showerhead — How to Replace a Shower Arm</video:title>
      <video:description>To remove the old showerhead, firmly grip the shower arm extending from the wall with one hand to keep it stable. With your other hand, use an adjustable wrench or a pair of adjustable pliers to grasp the base of the old showerhead. Turn the showerhead counter-clockwise to loosen and unscrew it from the shower arm. Once the head is removed, carefully peel or scrape off any old thread seal tape and clean any residue from the threads of the shower arm to ensure a clean surface for the new installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/drig_Fq5S9w</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8161-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C2r85dUBBfM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Install New Shower Arm — How to Replace a Shower Arm</video:title>
      <video:description>Take the new metal shower arm and wrap plumber&apos;s tape clockwise around the threads that will screw into the wall fitting. Ensure the tape is wound tightly and evenly, about 3-4 times around. Insert the new arm into the cleaned-out brass fitting and hand-tighten it until it&apos;s snug and oriented correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C2r85dUBBfM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8161-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i4-Sn4nwHgI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Teflon Tape to Shower Arm — How to Replace a Shower Arm</video:title>
      <video:description>Wrap Teflon tape around the threaded end of the shower arm pipe coming from the wall. Ensure you wrap the tape in a clockwise direction, so it doesn&apos;t unravel as you screw on the extension arm. Apply multiple layers; the video suggests starting with five layers and adding more if needed to achieve the correct tightness and alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i4-Sn4nwHgI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8161-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Y7EvQqJ0gPA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Shower Arm and Flange — How to Replace a Shower Arm</video:title>
      <video:description>Before installing the new shower arm, wrap Teflon tape (plumber&apos;s tape) clockwise around the threads that will screw into the wall. This creates a watertight seal. Next, slide the new flange onto the shower arm. Then, carefully screw the shower arm into the wall fitting by hand, turning it clockwise until it is tight and positioned correctly, usually pointing downwards. Slide the flange flush against the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Y7EvQqJ0gPA</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8162-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hMnfbih1zwk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Threads — How to Replace a Shower Arm</video:title>
      <video:description>After removing the fittings, thoroughly clean the male threads. Carefully peel and remove all of the old, frayed Teflon tape and any residual sealant or debris. A clean surface is essential for the new sealant to work effectively. Inspect both the fitting&apos;s threads and the pump port&apos;s threads for any damage or cracks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hMnfbih1zwk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8162-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r7E1cwsWlHk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Tape Shower Arm Threads — How to Replace a Shower Arm</video:title>
      <video:description>After removing the old showerhead, inspect the threads on the shower arm extending from the wall. Use a brush or cloth to clean away any old tape, mineral deposits, or plumber&apos;s putty. This ensures a clean surface for a proper seal. Then, take the thread seal tape and wrap it clockwise around the threads 3-4 times.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r7E1cwsWlHk</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8162-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8-Uvq2PcJLo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Pipe Threads — How to Replace a Shower Arm</video:title>
      <video:description>Take a wire brush and thoroughly scrub the male threads of the pipe extending from the wall. This removes any old sealant, rust, or debris. After cleaning, take a roll of thread seal tape (Teflon tape) and wrap it tightly around the threads 3-4 times in a clockwise direction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8-Uvq2PcJLo</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8165-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZjJt37V33qc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Existing Showerhead — How to Replace a Shower Arm</video:title>
      <video:description>To begin, remove the current showerhead from the shower arm. Wrap a towel around the base of the showerhead to protect its finish. Use a pair of channel-lock pliers over the towel to get a good grip and turn the showerhead counter-clockwise to unscrew it from the shower arm pipe coming out of the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZjJt37V33qc</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8165-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0Hjl4nbtNcA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Showerhead — How to Replace a Shower Arm</video:title>
      <video:description>To begin, remove the old showerhead from the shower arm. Grasp the showerhead firmly with your hand and twist it in a counter-clockwise direction to unscrew it. If it is difficult to turn by hand, you can use a towel to get a better grip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0Hjl4nbtNcA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8165-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Uv749_2cTgE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unscrew the Showerhead — How to Replace a Shower Arm</video:title>
      <video:description>To begin, you must remove the showerhead from the shower arm. Using an adjustable crescent wrench, grip the flat edges on the nut of the showerhead. Turn it counter-clockwise to loosen the connection. Once it&apos;s loose, you can finish unscrewing it by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Uv749_2cTgE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8145-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zEdYFSEQjKU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Faucet — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Choose a suitable location on your sink or countertop for the new faucet. If a pre-existing hole is not available, use an electric drill with a bit up to 1/2&apos; to drill a new one. Insert the threaded stem of the faucet through the hole from the top, ensuring the top gasket is seated between the faucet base and the countertop. From underneath the sink, slide the black plastic locknut over the stem and hand-tighten it to secure the faucet in place. Finally, push the faucet adapter onto the end of the faucet&apos;s stem to prepare it for tubing connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zEdYFSEQjKU</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8145-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/--pHOpgDkFI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drill Faucet Hole in Countertop — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>First, mark the desired location for the faucet on the wooden countertop, ensuring proper clearance and placement relative to the sink. Using a drill equipped with a correctly sized hole saw, carefully drill a hole through the countertop at the marked spot. The video notes that if you have a granite countertop, professional help is recommended for drilling. Ensure the hole is clean and free of debris before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/--pHOpgDkFI</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8145-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NWGf3wQVdUY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Faucet Location — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Choose a suitable surface on the sink or countertop to install the drinking faucet. If the sink does not have a pre-existing hole, use a 1/2 inch drill bit to drill a hole. Use a faucet bracket if there is no available hole.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NWGf3wQVdUY</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8144-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5xFUJIUsHVI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Power — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Check if the outlet where the garbage disposal is plugged in has power. Unplug anything from the outlet and plug in something like a hair dryer to see if the garbage disposal is getting power.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5xFUJIUsHVI</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8144-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Eori7X5oGbw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unplug the disposal — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Unplug the garbage disposal from the power outlet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Eori7X5oGbw</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8144-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pYKXGDBxx_k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Before you begin, make sure to shut off the electrical power supply to the garbage disposal unit at the breaker. Unplug the disposer from the wall outlet if it has a plug. Also, turn off the water supply to your sink. Place a bucket or pan underneath the garbage disposal and remove the drain pipe and dishwasher drain tube if present.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pYKXGDBxx_k</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8142-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y3jgevErgIc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Secure Drain Assembly — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Carefully place the drain assembly with the fresh putty into the sink drain opening from the top. Press down firmly to seat it. From underneath the sink, slide the rubber gasket up against the sink bottom, followed by the cardboard friction ring. Finally, thread the large locknut onto the drain assembly and tighten it by hand. To fully secure it, use a screwdriver and hammer to gently tap the locknut clockwise until it is snug. This will squeeze the plumber&apos;s putty out around the top, creating a tight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y3jgevErgIc</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8142-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GfZgVIAdlVg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten New Drain Assembly — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Install the new drain assembly. Push the putty-laden flange down into the drain hole from the top of the sink. From underneath, place the rubber gasket (with its own layer of putty) onto the drain body, followed by the friction washer and the locknut. Tighten the locknut by hand first, then use a wrench to secure it firmly. As you tighten, excess putty will squeeze out from the top; this is normal. The drain body with the side valve should be oriented correctly before final tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GfZgVIAdlVg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8142-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gvVCmvLL3Ns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unboxing and Component Overview — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Begin by unboxing the SinkTop Switch kit. Lay out and identify all the components: the push button assembly with your chosen finish (e.g., brushed stainless steel), the black power module with an attached power cord, the flexible air tubing, and the instruction manual. Take note of the &apos;This side up&apos; sticker on the power module, as this orientation is crucial for proper installation under the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gvVCmvLL3Ns</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8140-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XlUYVSeZ8hs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Begin by ensuring all electrical power to the under-sink appliances is disconnected. Unplug the power cords for the garbage disposal and the dishwasher from the electrical outlet located inside the cabinet. If the garbage disposal is hardwired, it is critical to turn off the corresponding circuit breaker at the main electrical panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XlUYVSeZ8hs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8140-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_jeKZo_okwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power and Plumbing — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>For safety, completely disconnect the garbage disposal from its power source. Unplug the power cord from the outlet under the sink. As an extra precaution, go to your home&apos;s electrical panel and turn off the circuit breaker that controls the garbage disposal. Before disconnecting any pipes, place a bucket or container underneath to catch any water that will drain out. Use a screwdriver or pliers to loosen the hose clamp on the dishwasher drain line and pull the hose off the disposal inlet. Then, unscrew the fittings that connect the main drain elbow to the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_jeKZo_okwE</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8140-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OrOJF3gDGhQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Before performing any troubleshooting, the first and most critical step is to ensure your safety by completely disconnecting the garbage disposal from its power source. Locate the power cord running from the bottom of the disposal unit and unplug it from the wall outlet, which is typically located under the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OrOJF3gDGhQ</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8141-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E4uevfq5T2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Checks and Testing — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Once all plumbing connections are secure, plug the garbage disposal into the switched outlet under the sink. Remove the stopper from the sink drain. Turn on the cold water faucet and let it run into the disposal. While the water is running, check all new plumbing connections underneath the sink for any drips or leaks. If no leaks are present, turn on the garbage disposal using its wall switch. Listen for normal operation. The unit should run smoothly and relatively quietly. Turn off the disposal first, then the water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E4uevfq5T2c</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8141-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yrJG_UUWhr8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reset Disposal — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Push the reset button on the disposal. Run cold water, and test the disposal&apos;s operation. If it is working normally, the task is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yrJG_UUWhr8</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8141-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_jeKZo_okwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Test the Disposal — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Mount the reassembled disposal back under the sink. Lift it up and engage the tabs with the sink flange. Turn the mounting ring clockwise to lock it securely in place. Reconnect the main drain elbow and tighten its fittings. Reattach the dishwasher hose and secure its clamp. Once all plumbing is reconnected, plug the unit back into the electrical outlet. Restore power at the circuit breaker. Run water and briefly turn on the disposal to test for proper operation and check for any leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_jeKZo_okwE</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8143-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JBFFvy4g4kQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Power Module and Garbage Disposal — How to Install an In-Sink Air Switch for a Garbage Dispo</video:title>
      <video:description>Under the sink, plug the air switch&apos;s power control module into the wall outlet that is designated for the garbage disposal. Then, take the power cord from the garbage disposal unit and plug it directly into the receptacle provided on the power control module. This setup allows the air switch to control the flow of electricity to the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JBFFvy4g4kQ</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8143-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m-RIh6SOlPQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Make Electrical Connections — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Plug the garbage disposal&apos;s power cord into the switched outlet on the power module. Then, take the power module&apos;s own cord and plug it into the dedicated wall outlet under the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m-RIh6SOlPQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8143-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hv25dAJ0viY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Hose and Test — How to Install an In-Sink Air Switch for a Garbage Disposal</video:title>
      <video:description>Firmly push the newly trimmed end of the air hose back onto the small connection nipple on the power control module. Ensure it is pushed on as far as it will go to create a secure, airtight seal. Once reconnected, go back to the countertop and press the air switch button to test if the garbage disposal now turns on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hv25dAJ0viY</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8102-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gf90CtH0N5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Before starting any work, ensure your safety and prepare the area to prevent messes. Go to your circuit breaker and turn off the power to the garbage disposal. Under the sink, turn the hot and cold water shut-off valves to the off position. Clear all items from the cabinet and lay down towels and place a bucket directly under the pipes to catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gf90CtH0N5w</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8102-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r25zMpTPotA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove P-Trap and Clear Blockage — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Wearing protective gloves, slowly loosen the slip nuts on both ends of the P-trap by turning them counter-clockwise. These can typically be loosened by hand. As the seals break, water will begin to drain into the bucket. Carefully lower and remove the P-trap section. A large volume of water will likely gush out. Once drained, inspect the removed pipe for the clog and clear it out. The clog is often a buildup of grease and food particles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r25zMpTPotA</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8102-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Yb4xZmQ13c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Installation — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Before starting any work, prepare the area under the sink. Begin by shutting off the hot and cold water supply valves, typically by turning them clockwise. Place a bucket or container underneath the plumbing to catch any water that will drain from the lines. Open the existing faucet to release any pressure and drain the remaining water. Finally, use an adjustable wrench to disconnect the hot and cold water supply lines from the shutoff valves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Yb4xZmQ13c</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8103-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tkqwTU4iVAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Drain Bladder to Hose — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Take the Drain Cleaning Bladder, a rubber device with a brass fitting, and securely screw it onto the threaded end of a standard garden hose. Ensure the connection is tight to prevent it from coming loose under pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tkqwTU4iVAc</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8103-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j0k6JkvDdHY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Hose and Insert Bladder — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Securely thread and attach a standard garden hose to the brass fitting on the end of the drain cleaning bladder. Once connected, carefully insert the bladder deep into the clogged drain, pushing it past the sink strainer as far as it will comfortably go to reach the blockage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j0k6JkvDdHY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8103-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s5B58S3CIVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unclog Drain with Bladder — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Securely attach a plumber&apos;s drain bladder to the end of a garden hose. Insert the bladder as far as possible into the downstream cleanout pipe (the one closer to the street). Have an assistant turn on the water at the spigot. The bladder will inflate to seal the pipe and then discharge high-pressure water to push and clear the blockage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s5B58S3CIVE</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8104-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tkqwTU4iVAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert Bladder and Flush Clog — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>After unscrewing the cap from the cleanout pipe, insert the Drain Cleaning Bladder attached to the hose into the pipe. You only need to insert it a few inches. Have someone turn on the water supply to the garden hose. The bladder will inflate, sealing the pipe, and then release powerful jets of water to dislodge and flush the clog. Keep the water running until the drain is clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tkqwTU4iVAc</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8104-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/43ZchEMW9-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert the Bladder into the Cleanout — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clo</video:title>
      <video:description>Unscrew the cap from the appropriate drain cleanout. Attach the drain bladder to your garden hose, and feed the hose and bladder into the pipe, pushing it as far as it can go towards the clog. It is critical to insert it past any branches leading to other fixtures to prevent backflow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/43ZchEMW9-g</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8104-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0VoZSItedRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert and Activate the Bladder — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Insert the drain cleaning bladder into the clogged floor drain. Push it in as far as it can comfortably go to ensure it passes the initial opening. Once it is in place, turn on the water supply to the garden hose. The bladder will swell with water pressure, creating a tight seal against the inside walls of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0VoZSItedRA</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8106-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/76fXLPfaem8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Drain — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>After letting the pressure bladder work for several minutes, turn off the water supply. Pull the deflated bladder out of the drain. Then, use the garden hose without the bladder to run a large volume of water into the drain to confirm that it is flowing freely and the clog has been completely removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/76fXLPfaem8</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8106-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XIGW1606Weg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush the Drain — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Firmly hold the hose and turn on the hot water valve. The bladder will expand to seal the pipe, and you will feel the hose become taut. The water pressure will build up and force the clog down the drain. Let the water run for approximately three minutes to ensure the line is thoroughly flushed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XIGW1606Weg</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8106-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/23T9p5NJHMc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Activate the Drain Bladder — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Have someone turn on the water supply to the garden hose. Start with a slow flow and then increase to full pressure. The bladder will inflate, sealing the pipe, and then shoot a powerful jet of water forward to break up and flush the clog away.</video:description>
      <video:player_loc>https://www.youtube.com/embed/23T9p5NJHMc</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8107-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gU2tmfx2fRw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert the Bladder into the Pipe — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Take the garden hose with the drain cleaning bladder attached and carefully insert it into the open sewer pipe. Feed the hose down the pipe, pushing the bladder as far in as possible. You want to ensure the bladder is well inside the pipe so that when it inflates, it forms a tight seal against the pipe walls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gU2tmfx2fRw</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8107-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DD1zOmKnFs4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert and Activate Bladder — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>The user takes the drain bladder and inserts it deep into the floor drain opening. Once it&apos;s in place, they turn the shut-off valve on the hose. This allows water to flow, causing the rubber bladder to expand and form a tight seal against the inside of the pipe. The water then jets out from the tip of the bladder, directing high pressure towards the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DD1zOmKnFs4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8107-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0VoZSItedRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert and Activate the Bladder — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>Insert the drain cleaning bladder into the clogged floor drain. Push it in as far as it can comfortably go to ensure it passes the initial opening. Once it is in place, turn on the water supply to the garden hose. The bladder will swell with water pressure, creating a tight seal against the inside walls of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0VoZSItedRA</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8105-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/23T9p5NJHMc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Drain Bladder — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>After turning off the water, carefully remove the hose and bladder from the drain. If it feels stuck, twist the hose clockwise while pulling. This ensures you are tightening the bladder onto the hose, preventing it from detaching inside the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/23T9p5NJHMc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8105-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gU2tmfx2fRw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Bladder and Close Cleanout — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>After flushing the pipe, turn off the water supply. The bladder will deflate. Firmly pull the garden hose to retrieve the bladder from the sewer pipe. Once it is removed, take the PVC cleanout cap and screw it back on clockwise by hand. Use the pipe wrench to give it a final quarter-turn to ensure it is snug and securely sealed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gU2tmfx2fRw</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8105-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/76fXLPfaem8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Drain — How to Use a Drain Cleaning Bladder (Blow Bag) to Clear a Clog</video:title>
      <video:description>After letting the pressure bladder work for several minutes, turn off the water supply. Pull the deflated bladder out of the drain. Then, use the garden hose without the bladder to run a large volume of water into the drain to confirm that it is flowing freely and the clog has been completely removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/76fXLPfaem8</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8089-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7UCYP_1tfsc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Pipes — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>First, identify the hot and cold water pipes at the top of your water heater. Use a measuring tape to measure the diameter of the pipes (usually 3/4&apos;) and the total length of exposed pipe you wish to cover. This ensures you buy the correct size and amount of foam pipe insulation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7UCYP_1tfsc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8089-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8PF3shoPSew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure and Insulate Pipes — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>After connecting all pipes, secure them to prevent movement and insulate the hot water line. Use two-hole pipe straps to fasten the valve securely to the wooden blocking, replacing any temporary straps. Add additional straps along the vertical runs of the hot and cold pipes, securing them to the studs. Finally, install foam pipe insulation on the hot water line. Measure and cut the foam tubing with a utility knife to fit around the pipe and fittings, which helps conserve hot water and prevent heat loss into the wall cavity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8PF3shoPSew</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8089-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KguLfUVFXqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connecting Water Supply Lines — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>Identify the hot and cold water supply lines, which are typically color-coded with red for hot and blue for cold as seen in the video. Connect the end of each flexible supply line to the corresponding shut-off valve on the wall. It is recommended to apply a few wraps of thread seal tape around the valve&apos;s threads before connecting. Tighten the compression nuts securely with an adjustable wrench, but be careful not to overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KguLfUVFXqU</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8085-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5O7Z9O711vw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect the Cut and Final Review — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>Once the cut is complete, remove the severed piece of pipe. Inspect the cut edge for smoothness and to ensure it is straight. The host notes that the sharp blade leaves a clean edge with minimal burrs, which is suitable for gluing a new fitting. If the cut is slightly angled, you can make minor adjustments by carefully trimming the high spots with the cutter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5O7Z9O711vw</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8085-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uWB5BlZA_gc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Panels to Size — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>Using various power tools, cut the green soundproofing panels to fit the specific dimensions of the wooden enclosure frame. An oscillating multi-tool is ideal for starting cuts and making intricate notches, while a compact circular saw can be used for longer, straight cuts. A marker and measuring tape are essential for marking your cut lines accurately on the panel. Ensure you are wearing a respirator and safety glasses throughout the cutting process to protect yourself from airborne particles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uWB5BlZA_gc</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8085-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8yb0S6ahyg0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Post-Cut Inspection — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>After the cut is complete, release the trigger to power down the saw and set it aside in a safe location. The user in the video expresses satisfaction with the tool&apos;s performance, noting that the cut was &apos;easy peasy&apos;. It is good practice to inspect the cut edge for any sharp burrs that may need to be filed down for a smooth, safe finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8yb0S6ahyg0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8088-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R6GW-_k3Sr4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit and Measure — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>Hold the various pipe sections and fittings in place under the sink to simulate the final assembly. This &apos;dry-fit&apos; allows you to see how the pieces connect from the sink strainer and garbage disposal to the T-fitting, P-trap, and finally the wall drain. This step is crucial for determining the exact lengths to cut the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R6GW-_k3Sr4</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8088-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TiAIlAjOJBs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Bend Water Supply Pipes — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>Using a manual pipe bender, carefully bend the hot (marked with red tape) and cold (marked with blue tape) water supply pipes. Create the necessary angles to ensure the pipes align perfectly with the corresponding inlets on the shower valve body. This step requires precision to ensure a proper fit within the wall framing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TiAIlAjOJBs</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8088-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p7wedZ7D988/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Prepare Pipes — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>The plumber measures and prepares the PVC pipes and fittings for the laundry and half bath drain lines. He uses a tape measure, PVC cutter and PVC cement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p7wedZ7D988</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8086-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EjHT3poH4Q4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit P-Trap Components — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>The plumber takes the various components of the P-trap assembly, including a T-fitting for the main line, a U-bend, and an elbow connector, and fits them together without any adhesive. This dry-fitting process involves connecting the P-trap to the drain pipe extending from the wall and aligning it with the main drain line. The plumber adjusts the pieces to ensure a snug and properly angled fit before proceeding to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EjHT3poH4Q4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8086-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/swKQGdjDQbQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Connect Drain Pipes — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>Begin by dry-fitting the P-trap and all PVC drain pipe components to ensure a proper fit between the sink&apos;s tailpiece and the drain stub-out in the wall. Once you confirm the fit, disassemble the parts. Use a deburring tool to clean the inside and outside edges of the pipe. Apply PVC primer to the outside of the pipe ends and the inside of the fittings that will be joined. Follow immediately with a layer of PVC cement. Firmly push the pipe into the fitting, giving it a quarter-turn twist to spread the cement evenly. Hold the joint for about 30 seconds to allow it to set. Connect the assembled P-trap to the sink&apos;s tailpiece, ensuring the slip nuts are hand-tightened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/swKQGdjDQbQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8086-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wpgvm6PcG3M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Glue and Install P-Trap — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>The final plumbing step is to install the P-trap. Apply PVC primer and cement to all remaining connection points on the P-trap, the vertical stub, and the 90-degree elbow. Carefully assemble the P-trap, pushing the pieces together firmly and holding for a few seconds to ensure a strong bond. This completes the drain assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wpgvm6PcG3M</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8087-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EZGw52lJJVU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Water On and Test for Leaks — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>Slowly turn the hot and cold water supplies back on. Carefully watch the area around the cap assembly and packing nut for any drips or leaks. Once the water is on, turn the handle to open the valve and let the water run. Cycle the handle through the hot and cold ranges to test its function. Finally, turn the valve off completely and perform one last visual check for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EZGw52lJJVU</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8087-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/P1LRSNoGjHs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Faucet and Final Test — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>Once you&apos;ve confirmed the connection is leak-free, reposition the insulation around the pipe in the crawlspace. Outside, use a power drill to drive screws through the faucet&apos;s mounting flange, securing it to the house siding. Finally, turn the faucet on to test its operation and ensure water flows correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/P1LRSNoGjHs</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8087-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OgUshw9dsfE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Leakage Test — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>With all pipes connected, perform a critical leakage test before finishing the wall. Remove the protective plastic cover, temporarily install the valve cartridges and knobs, and insert plugs or caps on all three outlets (rainfall shower, handheld, tub spout). Turn on the main water supply to pressurize the system. Carefully inspect every joint and connection for any signs of water leakage. This step is vital to prevent water damage inside the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OgUshw9dsfE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8084-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H3j1FSrcwmk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Sink Basin — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>Before lifting the sink, ensure you have a safe, padded area prepared on the floor, such as a thick towel or a mat. With all connections severed and fasteners removed, grip the sink basin firmly on both sides. Lift it straight up to clear the pedestal and then pull it away from the wall. Carefully place it on the prepared surface. This will give you full access to the faucet and drain assembly for repairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H3j1FSrcwmk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8084-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EmeBXRfiMDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing and Unbolt the Sink — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>To access the drain assembly for replacement, the sink basin must be removed. First, turn off the water supply at the shut-off valves under the sink. Disconnect the hot and cold water supply lines from the faucet. Place a bucket under the P-trap and disconnect it from the wall drain and the sink&apos;s tailpiece. Finally, locate the two bolts securing the sink basin to the wall and remove them. Carefully break the caulk seal between the sink and the pedestal if present.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EmeBXRfiMDQ</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/8084-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f-PqZuRelxQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Sink in Place — How to Install an ADA-Compliant Under-Sink Plumbing Shield</video:title>
      <video:description>With all the cabinet modifications complete, the final step is to install the sink. With the help of another person due to the sink&apos;s weight, carefully lift the sink and lower it into the prepared opening. Guide it into place, ensuring the side flanges settle securely into the routed channels on the cabinet walls and the apron front is correctly positioned.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f-PqZuRelxQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7903-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KvRy5J3G-bU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare New Spigot for Installation — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>The expert prepares the new frost-proof sillcock for installation. He compares the old, short spigot with the new, longer one, noting the superior design. He decides to solder the new pipe directly rather than using a threaded adapter to ensure a slim profile for fitting through the existing hole. He measures and cuts the new copper pipe to the appropriate length with a tubing cutter. Next, he thoroughly cleans the end of the new pipe and the existing pipe in the basement using a wire brush to ensure a strong solder joint. Critically, he disassembles the new spigot to remove the stem, which contains a rubber washer that would be destroyed by the heat of soldering. Finally, he applies flux to the cleaned pipe ends.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KvRy5J3G-bU</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7903-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XjUFjbfQqzU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Copper Pipe for Soldering — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>To begin, the copper pipe extending from the wall must be prepared for soldering. Take a piece of emery cloth or fine-grit sandpaper and vigorously sand the last few inches of the copper pipe. The goal is to remove all oxidation, grime, and any old sealant, revealing a bright, shiny copper surface. Once the pipe is clean, use a small flux brush to apply a thin, even layer of soldering flux all around the cleaned portion of the pipe. This flux is essential as it will chemically clean the metal when heated and allow the solder to flow smoothly into the joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XjUFjbfQqzU</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7903-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/15vxtLIj5RM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder New Valve Assembly — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Using sandpaper or emery cloth, thoroughly clean the ends of the copper pipes and the inside of the fittings. Apply a thin layer of lead-free tinning flux to all surfaces that will be joined. To protect the internal seals of the new valves from heat, wrap them with a wet cloth and ensure the valve is in the open position. Use a propane torch to heat the joint evenly. Once hot enough, touch the lead-free solder to the joint, allowing it to be drawn into the gap and create a seal. Solder the final connection that attaches the new assembly to the pipe inside the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/15vxtLIj5RM</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7895-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sGi9669Eldw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Main Water Supply — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Locate the main water shut-off valve for your property, which is typically found outside near the water meter. Turn the valve handle clockwise until it is fully closed to stop the flow of water to the house.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sGi9669Eldw</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7895-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CbJ0jlkFbD8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Begin by locating and shutting off the water supply to the outdoor spigot. This is often a separate valve located in a basement or utility room. If a dedicated valve doesn&apos;t exist, you will need to turn off the main water supply to the entire house, which is typically located near the water meter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CbJ0jlkFbD8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7895-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5J1WewbdCeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Locate the main water shut-off valve for the house, which is typically found outside near a hose spigot. Turn the handle on the valve to the off position to stop the flow of water to the entire house, preventing any water from leaking or spraying while you work on the plumbing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5J1WewbdCeQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7898-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7TgbCEwc3P4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Heat the Joint — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Using a propane or MAPP gas torch, apply heat directly and evenly to the copper fitting, not the pipe. Move the flame around the entire circumference of the fitting to ensure uniform heating. Continue this process until the copper is hot enough to melt solder on contact. Heating the fitting first is crucial as it has more mass and ensures that when solder is applied, it will be drawn into the joint by capillary action rather than just sitting on the surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7TgbCEwc3P4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7898-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1nKtsT-753E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Connections — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Using a propane torch, heat the joints of the assembled pipes and fittings. Apply the heat primarily to the fitting, not the pipe. Once the copper is hot enough, touch the tip of the lead-free solder to the edge of the joint. The heat will melt the solder and draw it into the gap, creating a seal. Repeat for all connections on the hot, cold, and mixed lines. After soldering, wipe the hot joint with a damp cloth to remove excess flux.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1nKtsT-753E</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7898-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tNUsL4F6xHQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Fitting — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Slide the fluxed fitting onto the end of the copper pipe, ensuring it is pushed on all the way. Ignite the propane torch and begin heating the brass fitting, not the pipe or the solder directly. Heat the fitting evenly until it reaches a temperature where it will melt the solder on contact. Touch the end of the solder wire to the joint where the pipe and fitting meet. The heat will draw the molten solder into the joint, filling the gap via capillary action. Continue feeding solder until a complete, shiny ring of solder is visible around the entire joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tNUsL4F6xHQ</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7901-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SvyWnqoPJyU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Convert Copper to PEX — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>First, prepare the existing hot and cold copper supply lines. Clean the inside and outside of the pipe ends using a deburring tool and wire brush or emery cloth. Apply a thin, even coat of water-soluble flux to both the outside of the copper pipe and the inside of the copper-to-PEX adapter fitting. Using a soldering torch with MAPP gas, heat the fitting, not the pipe, until it&apos;s hot enough for the solder to be drawn into the joint. Apply lead-free solder around the joint until a complete seal is formed. Wipe away any excess solder with a wet rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SvyWnqoPJyU</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7901-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GwV-YsePvLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Valve and Apply Sealant — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Slide a new escutcheon plate over the cleaned pipe until it is flush with the wall. Take the new quarter-turn shutoff valve and apply pipe thread sealant, or &apos;pipe dope&apos;, to the threads of the compression fitting. Push the valve firmly onto the end of the copper pipe until it seats fully. Hand-tighten the compression nut onto the valve body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GwV-YsePvLc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7901-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/39dP_J8S9zs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Seal Sillcock — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>The sillcock is shown fully installed in a brick exterior wall. The process, which happens off-camera, involves drilling a hole through the wall, inserting the sillcock, and connecting it to the home&apos;s water supply (in this case, PEX tubing). The exterior flange of the sillcock is securely mounted to the brick, and a bead of white caulk is applied around the perimeter of the flange to create a weatherproof seal, preventing water from entering the wall cavity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/39dP_J8S9zs</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7905-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jLp8QW5wRSM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prep the new faucet. — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Prepare the new frost-proof faucet for installation.  Measure the total length of the old faucet and transfer the measurement to the new faucet.  Cut the new faucet pipe to length. Apply flux to the inside and outside of the pipe ends that will be soldered. Open the handle of the new faucet before soldering. Solder the faucet inlet to the new pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jLp8QW5wRSM</video:player_loc>
      <video:duration>121</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7905-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KvRy5J3G-bU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare New Spigot for Installation — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>The expert prepares the new frost-proof sillcock for installation. He compares the old, short spigot with the new, longer one, noting the superior design. He decides to solder the new pipe directly rather than using a threaded adapter to ensure a slim profile for fitting through the existing hole. He measures and cuts the new copper pipe to the appropriate length with a tubing cutter. Next, he thoroughly cleans the end of the new pipe and the existing pipe in the basement using a wire brush to ensure a strong solder joint. Critically, he disassembles the new spigot to remove the stem, which contains a rubber washer that would be destroyed by the heat of soldering. Finally, he applies flux to the cleaned pipe ends.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KvRy5J3G-bU</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7905-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81ICDNCIRL0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Shut-off Valve Threads — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>To determine which size shut-off valve you have, first ensure the water is turned off and remove the old supply line. Using a tape measure, measure the outside diameter of the male threads on the shut-off valve. If the measurement is approximately 1/2 inch in diameter, you need a supply line with a 3/8 inch compression fitting. If the measurement is approximately 5/8 of an inch in diameter, you need a supply line with a 1/2 inch compression fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81ICDNCIRL0</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7896-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/StglHlF5ZME/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Leak Testing — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Before enclosing the wall, the water supply is turned back on. A temporary handle is placed on the valve stem to operate the new fixture. Water is run through both the tub spout and the shower riser pipe to thoroughly check all new solder joints for any signs of leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/StglHlF5ZME</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7896-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b263QXdkaLM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks and Functionality — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Return outside and test the newly installed faucet. Turn the handle to open the valve and check for a strong, steady stream of water. Check for any leaks around the faucet flange or from the interior connection. Turn the water off and ensure the valve closes completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b263QXdkaLM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7896-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QmCbcwkVDpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Return to the main water shut-off and turn it back on slowly. Go back to the sink and carefully inspect the new valve connection for any signs of leaking. If the connection is dry, open the new valve by turning its handle counter-clockwise. Finally, turn on the faucet and check the supply line connection and the valve itself one last time for any drips. If everything is dry, the job is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QmCbcwkVDpQ</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7897-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7HwiaP2VO5M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Sillcock — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Start the disassembly by using a flathead screwdriver to remove the central screw holding the handle in place. Once the screw is out, remove the decorative red label and pull the handle straight off the stem. Next, use an adjustable wrench to loosen and unscrew the outer packing nut, followed by the inner packing nut. Be careful to set aside the washer located between these two nuts. With the nuts removed, the entire stem assembly can be pulled out from the body of the sillcock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7HwiaP2VO5M</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7897-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vnqhwfFHzPg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Faucet Spout — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Locate the small set screw on the underside of the existing bathtub faucet spout. Insert the correct size Allen wrench into the screw and turn it counter-clockwise to loosen it. It may take several turns to retract the screw enough to release the spout from the pipe. Once loose, firmly grip the spout and pull it straight off the copper pipe extending from the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vnqhwfFHzPg</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7897-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Epv1Z1Yet2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Adapter — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>After removing the spout, locate the slip-on adapter on the copper pipe. Use a flathead screwdriver to loosen the set screw on the clamp securing the adapter. Once the clamp is loose, grip the adapter firmly with a pair of adjustable pliers and pull it straight off the end of the copper pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Epv1Z1Yet2c</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7900-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CjkF2UJTrCA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Silicone Sealant to Drain Flange — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Using a caulk gun, apply a continuous and generous bead of 100% silicone sealant to the entire underside of the top drain flange. Ensure there are no gaps in the bead to create a complete, watertight seal when the flange is pressed against the shower pan.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CjkF2UJTrCA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7900-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0GbbJJJJiUA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Silicone Caulk — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Using a caulk gun, apply a bead of 100% silicone caulk into the gap between the top of the spout and the shower wall. You only need to caulk the top half to prevent water from running down the wall and getting behind the spout. The bottom should be left open to allow any water that does get in to drain out. Smooth the bead with a wet finger or a caulk tool, then remove the masking tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0GbbJJJJiUA</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7900-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tMY2VLszkoI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Silicone Sealant — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Using a caulk gun, apply a continuous and generous bead of silicone sealant all the way around the cleaned sink flange. Ensure the bead is unbroken to create a complete, waterproof seal when the sink is pressed against the countertop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tMY2VLszkoI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7902-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KvRy5J3G-bU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Solder New Spigot — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>With the new spigot prepared, the expert pushes it through the hole in the wall from the outside. He then moves to the basement to complete the plumbing connection. Using a propane torch, he carefully heats the copper pipe and the new coupling until they are hot enough to melt solder. He touches the solder to the joint, and capillary action pulls it into the gap, creating a watertight seal. After the solder has flowed completely around the joint, he removes the heat and wipes away the excess flux with a damp cloth. To finish the installation, he goes back outside and uses a drill to drive two corrosion-resistant screws through the spigot&apos;s flange, securing it firmly to the house&apos;s siding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KvRy5J3G-bU</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7902-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RFVSR-7GfkU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet and Mark for New One — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>After the pipe is cut inside, go outside and remove the old faucet. It should now pull straight out from the wall. You may need to gently pry it or cut away old caulk. Once removed, insert the new frost-proof sillcock through the hole to test the fit. Use a marker to mark the locations for the mounting screws on the foundation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RFVSR-7GfkU</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7902-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q6a9wdsPIcw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Remove the Old Spigot — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Access the old, leaky spigot, which is located in an underground valve box. Since it&apos;s in a tight, watery space, use a small hacksaw to cut through the copper pipe connected to the spigot. Carefully saw through the pipe until the spigot assembly can be completely removed from the line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q6a9wdsPIcw</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7904-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/39dP_J8S9zs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Seal Sillcock — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>The sillcock is shown fully installed in a brick exterior wall. The process, which happens off-camera, involves drilling a hole through the wall, inserting the sillcock, and connecting it to the home&apos;s water supply (in this case, PEX tubing). The exterior flange of the sillcock is securely mounted to the brick, and a bead of white caulk is applied around the perimeter of the flange to create a weatherproof seal, preventing water from entering the wall cavity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/39dP_J8S9zs</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7904-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RFVSR-7GfkU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet and Mark for New One — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>After the pipe is cut inside, go outside and remove the old faucet. It should now pull straight out from the wall. You may need to gently pry it or cut away old caulk. Once removed, insert the new frost-proof sillcock through the hole to test the fit. Use a marker to mark the locations for the mounting screws on the foundation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RFVSR-7GfkU</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7904-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9C1DvS-Y4SE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Faucet — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Insert the threaded end of the new faucet into the pipe fitting in the wall. Hand-tighten it by turning it clockwise. Once it is snug, use pliers for a final turn to secure it tightly, ensuring the spigot is oriented correctly with the outlet facing downwards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9C1DvS-Y4SE</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7899-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RFVSR-7GfkU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Connection — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Assemble the fluxed pipes and coupling. Using a propane torch, heat the copper coupling evenly. Do not heat the pipe directly, as the heat on the fitting will draw the solder in. Once the flux sizzles and the pipe is hot enough, touch the lead-free solder to the edge of the joint. The solder will melt and be pulled into the gap by capillary action, creating a complete, watertight seal around the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RFVSR-7GfkU</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7899-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/15vxtLIj5RM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder New Valve Assembly — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Using sandpaper or emery cloth, thoroughly clean the ends of the copper pipes and the inside of the fittings. Apply a thin layer of lead-free tinning flux to all surfaces that will be joined. To protect the internal seals of the new valves from heat, wrap them with a wet cloth and ensure the valve is in the open position. Use a propane torch to heat the joint evenly. Once hot enough, touch the lead-free solder to the joint, allowing it to be drawn into the gap and create a seal. Solder the final connection that attaches the new assembly to the pipe inside the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/15vxtLIj5RM</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7899-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u1RyqN8jlZ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Heat the Fitting — How to Replace a Frost-Free Outdoor Spigot (Sillcock)</video:title>
      <video:description>Wearing heat-resistant gloves, firmly grasp the brass PEX tee fitting with a pair of channel lock pliers. Ignite a propane torch and carefully apply the flame to the exterior of the brass fitting, focusing on the area containing the stuck piece of PEX pipe. Rotate the fitting or move the torch to ensure even heating around the entire circumference. Continue heating until the PEX pipe begins to soften, melt, and smoke, indicating it&apos;s ready for removal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u1RyqN8jlZ0</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7627-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mTSqkUBrU2s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Supply and Prepare Work Area — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Locate the main water shut-off valve for your house, often found behind an access panel. Turn the lever so it is perpendicular to the pipe to cut off the water flow. Go to a sink and open the faucet to drain any remaining water from the pipes. Before working in the tub, close the drain or cover it with a towel to prevent any small parts from being lost.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mTSqkUBrU2s</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7627-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PJOPfBzfSuU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Before starting, locate the hot and cold water shutoff valves beneath the sink. Turn the handles clockwise until they are fully closed to stop the flow of water to the faucet. This is a critical first step to prevent flooding the cabinet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PJOPfBzfSuU</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7627-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/je6_S2wjJik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Shutting Off Water — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>The first and most critical step is to prepare the area and shut off the water. Locate the hot and cold water shutoff valves, typically found beneath the sink coming out of the wall. Turn both valves clockwise until they are fully closed. To ensure the water is completely off, open both the hot and cold taps on the faucet. No water should flow out. Place a small bucket or container directly under the P-trap to catch any water that will drain out in the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/je6_S2wjJik</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7630-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RNcstPVoX7s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water and Check for Leaks — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Slowly turn the water back on at the shut-off valve by rotating the handle a quarter turn until it stops. You will hear the toilet tank begin to fill. As it fills, carefully inspect both connection points for any signs of water drips. Use a towel to thoroughly dry the fittings, valve, and the floor area around them. For a more reliable leak check, place a dry piece of toilet paper on the floor directly under the connections. Any small drip will quickly become visible on the paper. It is a good practice to check again after 20-30 minutes to ensure there are no slow, persistent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RNcstPVoX7s</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7630-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dQpPEudltI8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water and Check for Leaks — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Slowly turn on the shut-off valves for both hot and cold water by turning the handles to the left (counter-clockwise). Turn on the faucet and let the water run. Close the pop-up drain to fill the sink partially, then release it to test the drain connection under a full flow. Use a flashlight to carefully inspect all new plumbing connections, including the supply lines and the entire P-trap assembly, for any drips or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dQpPEudltI8</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7630-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a8GlsWEGa-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Water On and Check for Leaks — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Return to the main water supply valve and turn it back on. Go back inside to the shower and turn on the hot and cold taps to test the new shower head. Carefully observe all connections for any signs of dripping or leaks. If you see a leak, turn the water off and tighten the connection slightly more or add more thread seal tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a8GlsWEGa-M</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7631-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZfgET7ye5dI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Supply Lines to New Faucet — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Take the new faucet and the new braided supply lines. Attach the supply lines to the hot and cold water inlets on the underside of the faucet. Hand-tighten the connections first, then use pliers to gently tighten them another quarter-turn. Be careful not to overtighten and damage the threads or rubber gaskets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZfgET7ye5dI</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7631-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/L9FmAXjAsnw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply Lines — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Connect the faucet&apos;s integrated hot and cold supply lines to the corresponding shut-off valves under the sink. The hot line is typically marked with a red indicator, and the cold with a blue one. Hand-tighten the nuts first, and then use an adjustable wrench to give them a final quarter to half turn to ensure a snug, watertight seal. Do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/L9FmAXjAsnw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7631-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Yb4xZmQ13c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply Lines — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Connect the water supply to the new faucet. First, attach the included one-way valve filter to the cold water shutoff valve. Then, connect the cold water supply line to the other end of this filter. Connect the hot water supply line directly to the hot water shutoff valve. Hand-tighten the connections first, then use an adjustable wrench to give them a final quarter-turn to ensure a tight seal. Once both lines are connected, slowly turn on both the hot and cold water shutoff valves and carefully check all connections for any leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Yb4xZmQ13c</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7633-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s4IK_Rd9wPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Old Faucet and Supply Lines — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Using an adjustable wrench, loosen and unscrew the nuts connecting the hot and cold water supply lines from the shut-off valves. Next, locate the mounting hardware holding the old faucet in place under the sink. Use a socket wrench or basin wrench to loosen and remove the nuts securing the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s4IK_Rd9wPY</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7633-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gZCAibNunRg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen Faucet Nuts with Basin Wrench — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>After the supply lines are detached, the mounting nuts holding the faucet are exposed. The presenter demonstrates how to use the basin wrench: position its head straight up to reach the nut, then slide the jaw over the nut. The spring-loaded jaw clamps onto the nut when you apply turning force to the handle. This allows you to grip the nut securely and turn the handle to break it loose, enabling the removal of the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gZCAibNunRg</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7633-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W4o5q0dwq7s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Mounting Nuts — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Locate the large ring nuts that clamp the faucet body to the sink. There is typically one on each side for a two-handle faucet. Turn these nuts counter-clockwise to loosen and remove them. You can usually do this by hand, but if they are tight, a basin wrench is the ideal tool.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W4o5q0dwq7s</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7628-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ndgLiQDBzVM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal and Install New Faucet — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Clean any old residue from the sink surface. Apply a continuous bead of waterproof silicone sealant around the faucet mounting holes to create a watertight seal. Press the new faucet firmly into the sealant. From underneath, thread on the new mounting nuts and hand-tighten them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ndgLiQDBzVM</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7628-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/28RKQkxciDs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Pipe — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Once the old spout is removed, thoroughly prepare the area for the new installation. Use a razor blade or utility knife to carefully scrape away any old caulk or residue from the tile surface around the pipe. Next, take plumber&apos;s mesh and scrub the copper pipe to remove any corrosion or buildup. Finally, use a wire brush to clean the threads at the end of the pipe, ensuring they are free of any debris or old sealant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/28RKQkxciDs</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7628-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z4k7Pf29Wq4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Plumber&apos;s Putty to New Faucet — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>To prepare the new faucet for installation, a generous amount of plumber&apos;s putty is taken and kneaded by hand. This process softens the putty and makes it more pliable. It is then rolled into a long, consistent rope. This rope of putty is carefully applied around the base of the new faucet, encircling the areas that will make contact with the sink deck to create a durable, watertight seal and prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z4k7Pf29Wq4</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7629-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ZiqkMj1HGc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount New Faucet — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Install the new faucet. First, clean the countertop surface where the old faucet was. Place the top gasket onto the countertop, aligning it with the sink holes. Feed the new faucet and its attached water lines through the holes. From underneath, slide on the bottom gaskets and hand-tighten the plastic mounting nuts to secure the faucet. Then, connect the new hot and cold water supply lines to the corresponding shut-off valves, ensuring hot is on the left and cold is on the right. Tighten these connections with a wrench, but do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ZiqkMj1HGc</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7629-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8aEl5TyRGVQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the New Faucet — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Carefully feed the new faucet&apos;s hoses and electronic cables through the mounting hole in the countertop. Ensure the faucet base is properly aligned and seated. From underneath the sink, slide the washer and mounting bracket up the faucet&apos;s shank. Thread the mounting screws or nuts onto the shank and tighten them by hand first, then use a wrench or screwdriver to fully secure the faucet so it doesn&apos;t move or rotate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8aEl5TyRGVQ</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7629-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PaMasBhANcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the New Faucet — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Unpack the new faucet and its components from the box. Take the flexible hot and cold water supply lines and hand-thread them into the corresponding ports on the base of the faucet. Next, slide the rubber base gasket over the supply lines and seat it firmly against the faucet base. Take the threaded mounting stud from the hardware bag, insert it into its hole on the faucet base, and use a screwdriver to tighten it until it is secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PaMasBhANcM</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7632-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7BVEtAGc6pQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle and Collar — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>With the set screw removed, grasp the faucet handle firmly and pull it straight up to remove it from the valve stem. This may require some wiggling if it&apos;s stuck due to mineral buildup. Next, unscrew the decorative outer collar that covers the main valve housing. If it&apos;s tight, use a rubber jar opener or a strap wrench to get a better grip without scratching the finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7BVEtAGc6pQ</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7632-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/we1rZOddmHU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Disassemble Faucet Handle — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Begin by preparing the area and disassembling the faulty faucet handle. To prevent losing any small parts, pull up the drain stopper to close the sink drain. Next, firmly grip the cone-shaped base of the handle and twist it counter-clockwise (to the left) to unscrew it from the main faucet body. Once it is fully unscrewed, lift the entire handle housing straight up and off the valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/we1rZOddmHU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7632-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4rnwUb8xsXE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Valve Cartridges — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>With the handles removed, use an adjustable wrench or pipe wrench to grip the hexagonal nut of the valve cartridge. Turn the wrench counter-clockwise to loosen and remove both the hot and cold cartridges. The narrator has difficulty with the hot side as it is seized, requiring a larger wrench and more force. Once loosened, the cartridges can be unscrewed by hand and lifted out of the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4rnwUb8xsXE</video:player_loc>
      <video:duration>105</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7634-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V4EGn48Jyg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan and Measure — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>The first step is to plan the installation. After confirming the need for an access panel to reach the bathtub plumbing, unbox the new access panel. Use a tape measure to determine the exact dimensions of the panel. Then, measure the space within the wall studs to ensure the panel will fit correctly and that the opening will provide sufficient room to work on the plumbing components in the future.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V4EGn48Jyg4</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7634-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JRFJ1LYzvyI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Creating Access Panel — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Make a small access panel using drywall to cover the faucet assembly while being able to access the plumbing for any future maintenance if needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JRFJ1LYzvyI</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7634-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u4GPbb5o46k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing — How to Replace a Deck-Mount Garden Tub Faucet</video:title>
      <video:description>Disconnect all plumbing connected to the bathtub. This includes the water supply lines for the hot and cold water to the faucet, as well as the main drain assembly. Use a power drill to remove screws securing the faucet fixtures and work with a partner to access the drain from underneath the tub frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u4GPbb5o46k</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7602-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E0OSpQFTv7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Joint — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Place a heat shield, such as a piece of cement board, behind the pipe to protect the wall. Slide the adapter onto the flux-coated pipe. Light your propane torch and begin heating the fitting, not the pipe directly. This draws the solder into the joint. Keep the tip of the blue flame about an inch from the fitting. After about 15-20 seconds of heating, touch the soldering wire to the joint on the side opposite the flame. If the fitting is hot enough, the solder will melt and flow into the seam. Continue feeding the solder until a continuous silver ring forms around the joint. Turn off the torch and let the joint cool undisturbed. You can wipe away any excess drips with a damp rag, being extremely careful of the heat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E0OSpQFTv7E</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7602-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dUUVx5-59K4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder Assembly in Place — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>With the new fittings prepared, solder the assembly in place. Slide the prepared elbow onto the existing copper pipe coming from the shutoff valve. Protect the wall and any nearby flammable materials with a wet rag or heat shield. Heat the joint with the torch until it&apos;s hot enough to melt the solder. Apply the solder to the joint, allowing it to wick all the way around and create a complete seal. Be careful not to set the wall on fire.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dUUVx5-59K4</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7602-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dUUVx5-59K4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder New Fittings — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Before installation, prepare the new fittings. This involves soldering a new copper elbow to the new dielectric union half. Clean both the inside of the elbow and the outside of the fitting, apply flux, and join them. Hold the assembly with pliers or a vise. Use a propane or MAPP gas torch to heat the joint evenly. Once hot, touch the solder to the joint, allowing it to melt and flow into the seam via capillary action. Be careful not to get any solder on the threaded or sealing surfaces of the union.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dUUVx5-59K4</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7607-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-tVmVsjIsg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Cool Joint — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Immediately after soldering, while the joint is still hot, use a damp cloth to wipe away any excess flux from the pipe and fitting. This prevents future corrosion. Allow the joint to cool down naturally before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-tVmVsjIsg4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7607-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JyVbjDsric4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Flux — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Apply soldering flux or paste to both the pipe and fitting surfaces that will be joined. Ensure enough flux is applied to cover all contact surfaces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JyVbjDsric4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7607-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BiR3eFlb2Fs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Cleanup and Inspection — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Immediately after the solder has flowed into the joint, remove the heat. While the joint is still hot, take a damp cloth and wipe away the excess flux from the outside of the pipe and fitting. This is an important step as leftover flux is acidic and can cause corrosion over time. Inspect the finished joint for a complete, shiny silver ring, which indicates a good seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BiR3eFlb2Fs</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7608-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C7WrQseB8DM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deburr and Clean the Pipe — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>After cutting, the end of the pipe will have sharp burrs. Use a deburring tool or fine-grit sandpaper (like the P220 grit shown) to smooth the inside and outside edges of the cut. This is crucial to prevent damage to the fitting&apos;s internal O-ring. Once smooth, use a clean cloth to wipe away any copper shavings and debris from the end of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C7WrQseB8DM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7608-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gSNlq7QK8lc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deburr and Chamfer the Pipe — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>After cutting, use a deburring tool to scrape away any plastic burrs from the inside edge of the pipe. Then, use a metal file to create a slight bevel, or chamfer, on the outside edge of the pipe. This chamfer helps the pipe enter the fitting smoothly and prevents the cement from being wiped away upon insertion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gSNlq7QK8lc</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7608-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zirp8vqApQc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Burrs — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>After cutting, carefully remove all burrs from the inside and outside of the pipe end. Burrs are small shavings or raised edges of plastic left from the cutting process. You can use a dedicated deburring tool, a utility knife, or a file to create a smooth, clean edge. This step prevents the burrs from scraping away the cement during assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zirp8vqApQc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7610-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ro0JPSQRQE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Valve — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Ignite a propane torch and begin heating the joint. Focus the heat on the valve body, as it is thicker and takes longer to heat than the pipe. Heat the side of the joint opposite from where you will apply the solder. Periodically touch the solder wire to the joint; when the metal is hot enough, the solder will melt instantly and flow into the seam. Once it starts to flow, remove the direct flame and apply the solder around the joint. The heat in the metal will draw the solder in via capillary action. Use a rag to quickly wipe away any excess drips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ro0JPSQRQE</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7610-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1nKtsT-753E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Connections — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Using a propane torch, heat the joints of the assembled pipes and fittings. Apply the heat primarily to the fitting, not the pipe. Once the copper is hot enough, touch the tip of the lead-free solder to the edge of the joint. The heat will melt the solder and draw it into the gap, creating a seal. Repeat for all connections on the hot, cold, and mixed lines. After soldering, wipe the hot joint with a damp cloth to remove excess flux.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1nKtsT-753E</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7610-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/40dp0If0GzI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Joints — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Use a propane torch to heat the joint. Focus the heat on the heavier brass valve body next to the fitting, not on the fitting itself. The heat will transfer to the copper. When the flux begins to bubble and smoke, the joint is getting close to temperature. Touch the tip of the lead-free solder to the seam on the side opposite the flame. If the joint is hot enough, the solder will instantly melt and be drawn into the entire seam via capillary action. Feed enough solder to create a complete, shiny silver ring around the joint, then remove the heat and solder. Repeat for all three joints.</video:description>
      <video:player_loc>https://www.youtube.com/embed/40dp0If0GzI</video:player_loc>
      <video:duration>191</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7604-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rX75Iel2Y98/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Copper Pipe — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Thoroughly prepare the copper pipe extending from the wall for soldering. Use a strip of emery cloth to sand the outside of the pipe until it is shiny and free of oxidation. Then, use a small wire brush to clean the inside of the pipe&apos;s opening to ensure all surfaces that will be soldered are clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rX75Iel2Y98</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7604-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jRaGs6EGBd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Copper Pipe and Fitting for Soldering — How to Solder Copper Pipes for a Permanent, Watertig</video:title>
      <video:description>The copper pipe end is thoroughly prepared for soldering. First, a deburring tool is used to clean the inside of the pipe. Then, emery cloth is used to sand the outside of the pipe until it is shiny and free of oxidation. The inside of the brass fitting is also cleaned with a wire brush. Finally, flux is applied with a brush to both the outside of the copper pipe and the inside of the brass fitting to facilitate solder flow and prevent oxidation during heating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jRaGs6EGBd4</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7604-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LdCK58UcnhA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation: Clean and Deburr the Pipe — How to Solder Copper Pipes for a Permanent, Watertight Join</video:title>
      <video:description>The first step is to thoroughly clean the surfaces of the copper pipe and the inside of the fitting that will be joined. Use sandpaper, an abrasive pad, or a wire brush to remove all oxidation and contaminants until the copper is bright and shiny. This is crucial for achieving proper wetting, which is the ability of the molten filler material to flow and bond to the surfaces. After cleaning, deburr the inside edge of the pipe using a round file or a dedicated deburring tool to remove any sharp edges left from cutting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LdCK58UcnhA</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7603-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jHOal59RktY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Copper Pipes — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Using a manual pipe cutter, make two clean cuts on the copper pipes that lead to and from the water softener location. To do this, clamp the pipe cutter onto the pipe, ensuring the cutting wheel is aligned. Tighten the knob slightly and rotate the tool around the pipe. Continue to incrementally tighten the knob and rotate the cutter until the pipe is completely severed. Deburr the inside and outside of the cut edges to ensure a smooth surface for the new fittings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jHOal59RktY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7603-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RpD39U-FidI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Prepare New Pipe Sections — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Measure and cut new sections of copper pipe as needed. Use a deburring tool to smooth the sharp edges on both the inside and outside of the cut pipe. Mark the pipe with a marker to indicate the proper insertion depth for the press fittings, ensuring a complete and secure connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RpD39U-FidI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7603-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x2ZVa1KyT9Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Pipe — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Place the pipe cutter around the pipe where the cut is desired. Tighten the cutter&apos;s handle until the cutting wheel makes contact, then give it an additional one-eighth turn. Rotate the entire cutter one full revolution around the pipe. Tighten the handle another eighth of a turn and rotate again. Repeat this incremental tightening and rotating process until the cutter slices completely through the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x2ZVa1KyT9Q</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7605-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4bojdmljD4Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cool and Clean the Soldered Pipe — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Allow the soldered pipe to cool. You can let it air cool or, as shown, carefully use water to cool it down more quickly. Once cool to the touch, use a damp rag to wipe down the pipe and fittings, removing any leftover flux residue which can be corrosive over time. The pipe is now ready for the new spout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4bojdmljD4Y</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7605-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-tVmVsjIsg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Cool Joint — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Immediately after soldering, while the joint is still hot, use a damp cloth to wipe away any excess flux from the pipe and fitting. This prevents future corrosion. Allow the joint to cool down naturally before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-tVmVsjIsg4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7605-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ABRGhTx8fis/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Joint — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>While the soldered joint is still hot, carefully use a wet rag or cloth to wipe away the excess flux from the pipe and fitting. This is important because leftover flux is acidic and can cause corrosion on the copper pipe over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ABRGhTx8fis</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7609-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ll7gmlo-Ki0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Heat Pipe and Apply Solder — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Ignite the torch and begin heating the copper fitting. Move the flame evenly around the entire circumference of the fitting to ensure uniform heating. Avoid concentrating heat in one spot. Periodically touch the solder to the joint on the side opposite the flame. When the pipe is hot enough, the solder will melt on contact and be drawn into the joint by capillary action. Continue applying solder around the entire joint until a complete, silver ring is visible, indicating the joint is full.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ll7gmlo-Ki0</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7609-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nZkVAvXtnuo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the New Fitting — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Apply a thin, even layer of flux paste to both the cleaned outer surface of the pipe and the inner surface of the new copper male threaded adapter. Slide the adapter onto the pipe. Using a propane torch, heat the base of the fitting, not the pipe itself. Once the fitting is hot enough that the flux sizzles, touch the lead-free solder to the joint seam. Capillary action will draw the molten solder into the joint, creating a watertight seal. Wipe away any excess solder with a damp cloth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nZkVAvXtnuo</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7609-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AtLMlUwVcdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the New Valve Assembly — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Once all parts are cleaned, apply a thin layer of flux to all pipe ends and the inside of the fittings. Assemble the new valve in a vise. Use a propane torch to heat each joint, focusing the heat on the heavier valve body. When the copper is hot enough, touch the solder to the joint, allowing it to be drawn in and create a seal. Wipe away any excess with a damp cloth while the solder is still molten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AtLMlUwVcdE</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7606-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81A-KNwkAbA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Flux and Wipe Excess — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Use a small brush to apply a thin, even coat of flux to the cleaned exterior of the pipe and the interior of the fitting. After applying flux, assemble the joint by pushing the fitting onto the pipe. With a gloved finger or a rag, wipe away any excess flux that squeezes out of the seam. This prevents the solder from running down the pipe when heated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81A-KNwkAbA</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7606-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/raEldIPChdA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Flux — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Flux is a chemical cleaning agent that facilitates soldering. Use a small brush to apply a thin, even layer of flux all around the cleaned exterior of the pipe. Avoid getting flux inside the pipe, as it is acidic and can cause corrosion. Insert the flux-coated pipe into the cleaned fitting and give it a twist to ensure the flux is evenly distributed within the joint. Wipe off any excess flux from the outside of the fitting with a cloth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/raEldIPChdA</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7606-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f3euSg6YJKw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Apply Flux — How to Solder Copper Pipes for a Permanent, Watertight Joint</video:title>
      <video:description>Thoroughly clean the end of the copper pipe and the inside of the fitting using sandpaper or emery cloth until they are both bright and shiny. Once cleaned, use a brush to apply a thin, even layer of flux to both surfaces. Avoid using too much flux, as it can cause the solder to bubble out of the joint during heating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f3euSg6YJKw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7562-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3RQ2Y5xWRko/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain and Clean the Toilet Tank — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>The first step is to shut off the water supply to the toilet. Locate the shut-off valve on the wall or floor behind the toilet and turn it clockwise until it stops. Flush the toilet to empty the water from the tank. Next, use a spray cleaner and a long-handled scrub brush to thoroughly clean the interior walls and bottom of the tank. The goal is to remove all sediment, mineral deposits, and grime to create a clean surface for the adhesive to bond to. Wear rubber gloves for this process as the inside of the tank can be quite dirty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3RQ2Y5xWRko</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7562-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TJ5yho7WVJ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attempt a Simple Fix (Optional) — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>First, attempt a non-invasive fix. Turn off the water supply to the toilet using the shut-off valve, which may require a screwdriver. Flush the toilet to empty the tank. Pour a limescale remover directly into and around the flush valve mechanism. Let the solution sit for at least an hour to dissolve any potential mineral buildup that could be causing the valve to stick.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TJ5yho7WVJ8</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7562-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g2gU31Tc27I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Valve and Clean Threads — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Once the tank is completely empty, disconnect the garden hose. Using a pair of channel-lock pliers, grip the old plastic drain valve and turn it counter-clockwise to unscrew it from the tank. Remove the valve completely. Take a clean rag and wipe the inside of the tank&apos;s threaded opening to remove any old sealant, rust, or sediment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g2gU31Tc27I</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7560-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Y2wh3OMyAI4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Method 2: Scrub with Pumice Stone — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>As an alternative to chemicals, use a pumice stone. First, thoroughly wet the pumice stone in the toilet bowl water. It is crucial that the stone is wet to prevent scratching the porcelain. Then, use the wet stone to scrub the rust stains directly. The abrasive nature of the pumice will remove the stains with less effort than the chemical method.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Y2wh3OMyAI4</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7560-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vSG7Mbnk98g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wet Sanding the Sink Surface — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>After removing the bulk of the putty, address the remaining stains on the porcelain sink. Use a piece of 600-grit wet/dry sandpaper, keeping a trickle of water running over the area. The water acts as a lubricant and helps flush away debris, minimizing the risk of scratching the sink&apos;s surface while effectively removing the stains.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vSG7Mbnk98g</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7560-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Jlqzslr3thU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub the Scratches — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Take a piece of abrasive cloth, such as a drywall sanding screen, and begin to vigorously scrub the marks inside the toilet bowl. Use a firm, consistent pressure with back-and-forth or circular motions to work on the scratches until they are completely gone. The soap and abrasive cloth work together to lift the marks from the porcelain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Jlqzslr3thU</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7557-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ta99sWz9zXQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>First, turn off the water supply to the toilet using the shut-off valve located on the wall behind or beside the toilet. Flush the toilet to drain most of the water from the tank. Hold the flush lever down to empty as much water as possible. Then, use a large sponge or towel to soak up and remove the remaining water from the bottom of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ta99sWz9zXQ</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7557-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i45HDIUIkIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Begin by locating the water supply valve on the wall or floor behind the toilet and turn it clockwise to shut off the water supply completely. Next, remove the tank lid and flush the toilet, holding down the flush lever until the tank is as empty as possible. Use a large, absorbent sponge to soak up and remove the last bit of water remaining at the bottom of the tank to prevent messes in the following steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i45HDIUIkIM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7557-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/haxVYgoBCng/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Toilet — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>First, remove your existing toilet seat. After removal, thoroughly clean the toilet rim. Next, locate the water supply shut-off valve on the wall and turn it off to stop water flow to the toilet. Flush the toilet and hold the handle down to completely drain the water from the tank. Place a towel on the floor and unscrew the flexible water supply line from the fill valve located underneath the toilet tank. The towel will catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/haxVYgoBCng</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7559-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UA0W7_afPjY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub Away Stains — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>After letting the solution sit, take a scrub pad and scrub the stained areas vigorously. The vinegar and baking soda mixture should have loosened the limescale, making it easier to scrub off. Continue scrubbing until all the stains are removed from the toilet bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UA0W7_afPjY</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7559-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9_coCyNe1pY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub and Let Sit — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Use the toilet brush again to swish the fizzing solution all around the bowl. Make sure to scrub the solution onto any stains that are above the normal water line. After swishing, let the solution sit in the toilet for up to 30 minutes. You can swish it again a couple more times during this period. Do not flush the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9_coCyNe1pY</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7559-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c3IL4Qhepmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Scuff Marks from Toilet Bowl — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>After removing the auger, address any scuff marks left inside the bowl. Apply a liquid toilet bowl cleaner, such as Lysol, directly onto the marks. Use a stiff-bristled scrub brush or a toilet brush to vigorously scrub the affected areas. This should remove most, if not all, of the metal marks from the porcelain surface. Flush to rinse.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c3IL4Qhepmc</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7561-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pp-RsGI7Z_M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Vinegar-Soaked Toilet Paper — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>To treat stains on the vertical sides of the bowl above the vinegar line, take wads of toilet paper, dip them in the vinegar to saturate them, and then press them onto the stained areas. The paper will stick to the sides, allowing the vinegar to continuously work on breaking down the stains.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pp-RsGI7Z_M</video:player_loc>
      <video:duration>85</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7561-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9_coCyNe1pY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Fizzing Solution — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Sprinkle about one cup of baking soda into the toilet bowl, covering the vinegar. Follow this by pouring an additional one to two cups of vinegar over the baking soda. This will create a vigorous fizzing action. Allow this solution to sit and work on the stains for about 10 minutes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9_coCyNe1pY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7561-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4mzBc-oUxZI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Vinegar to Dwell — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Once the vinegar is in the rim channels, let it sit undisturbed for one to one and a half hours. This dwell time is crucial for allowing the warm vinegar to work its magic, effectively softening and dissolving the hardened mineral deposits that are blocking the jets. Do not flush the toilet during this time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4mzBc-oUxZI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7556-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5usajydSAPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety Precautions — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Before handling the highly corrosive cleaner, it is crucial to take safety measures. Put on appropriate Personal Protective Equipment (PPE). The video demonstrates using a full respirator mask to protect your lungs from hazardous fumes and safety goggles to protect your eyes from splashes. It is also highly recommended to wear chemical-resistant gloves to protect your skin. Ensure the bathroom is well-ventilated by opening a window. The cleaner being used is &apos;Spirits of Salt,&apos; which contains 32% hydrochloric acid.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5usajydSAPw</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7556-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4mTC8wP96e4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Take Safety Precautions — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Before handling the muriatic acid for the main application, it is crucial to take proper safety precautions. The presenter emphasizes working in a well-ventilated area (outdoors) and wearing appropriate Personal Protective Equipment (PPE). This includes safety glasses to protect the eyes from splashes, a respirator to avoid inhaling toxic fumes, and rubber gloves to prevent skin contact with the highly corrosive acid.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4mTC8wP96e4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7556-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/13Rhla3uxx8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Put on Safety Gear — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Before beginning the inspection, it is crucial to put on the proper personal protective equipment. This includes wearing safety glasses to protect your eyes from splashes and waterproof gloves to protect your hands from contact with wastewater and contaminants.</video:description>
      <video:player_loc>https://www.youtube.com/embed/13Rhla3uxx8</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7558-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9_coCyNe1pY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Vinegar — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Pour approximately one cup of white vinegar directly into the toilet bowl. Take a toilet brush and swish the vinegar around to ensure it coats all the surfaces inside the bowl, especially where stains are present. Let the vinegar sit for about one minute to begin breaking down the mineral deposits.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9_coCyNe1pY</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7558-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bpQZik7Xhhw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Vinegar — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>Slowly pour the distilled white vinegar into the toilet bowl over the baking soda. This will create a significant fizzing and bubbling reaction. The reaction helps to loosen and dissolve the hard water and mineral deposits.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bpQZik7Xhhw</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7558-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Mwa2KYVvVjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Soak in White Vinegar — How to Remove Hard Water Stains from a Toilet Bowl</video:title>
      <video:description>The spindle is placed into a small disposable cup. Distilled white vinegar is then poured into the cup, fully submerging the perforated end of the spindle. The acidic nature of the vinegar is used to dissolve the mineral buildup that is causing the mechanism to be seized.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Mwa2KYVvVjU</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7270-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2ZeV2UK9IW0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the P-Trap — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Place a bucket underneath the sink to catch water. Use your hands or channel-lock pliers to loosen the two large nuts (slip nuts) on the curved part of the drain, known as the P-trap or J-bend. Once loose, remove the P-trap. Then, loosen the slip nut connecting the trap arm (the L-shaped pipe) to the drain pipe in the wall and pull the trap arm out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2ZeV2UK9IW0</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7270-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CuqmpWETsiA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the P-Trap — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Locate the U-shaped pipe under the sink, known as the P-trap. This is where clogs most often occur. Using your hands, or a pair of channel-lock pliers if the connections are too tight, carefully loosen the threaded slip-nuts on both ends of the P-trap. Be prepared for water to spill out. Once both nuts are loose, gently pull the P-trap down and away from the other pipes, emptying its contents into the bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CuqmpWETsiA</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7270-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s5loz2XrMag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect P-Trap — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>To fully remove the sink, the drain plumbing must be disassembled. Place a bucket underneath the U-shaped pipe, known as the P-trap, to catch water. Use channel-lock pliers to loosen the two large slip nuts: one connecting the trap to the vertical tailpiece from the sink, and the other connecting it to the waste pipe arm in the wall. Once loose, unscrew them by hand and remove the P-trap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s5loz2XrMag</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7265-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U0gd2T1MZW0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Sink P-Trap — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>After clearing the main line, address the bathroom sink. Open the cabinet under the sink and clear out all items. Place a small bucket directly under the P-trap to catch residual water. Use a pair of channel-lock pliers to loosen the two large slip nuts holding the P-trap in place. Once loose, unscrew them by hand and carefully lower the P-trap to remove it, emptying any contained water and debris into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U0gd2T1MZW0</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7265-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a9AiyGy8_eU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the P-Trap — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>To begin, place a bucket or container directly under the sink&apos;s P-trap assembly to catch any water or debris that will spill out during disassembly. Then, wearing gloves, use your hands to loosen and unscrew the slip nuts connecting the P-trap to the sink&apos;s tailpiece and the drain pipe in the wall. Carefully remove the P-trap sections and place them in the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a9AiyGy8_eU</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7265-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6f5JC--5inQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the P-Trap — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Place a bucket or a small container directly underneath the U-shaped section of the drain pipe, known as the P-trap. Proceed to unscrew the two threaded connections holding the P-trap in place. As you loosen them, water will drain into the bucket. Once disconnected, remove the P-trap and set it aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6f5JC--5inQ</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7267-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a_I0sZakc0o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Drain Pipe Opening — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Take the opportunity while the trap is removed to inspect the open drain pipe. Reach in and manually pull out any accumulated hair, gunk, or other debris to ensure the pipe is clear. The video shows the removal of significant debris and a screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a_I0sZakc0o</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7267-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NxccuBcGMAs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect the P-trap — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Manually loosen and remove the two nuts that connect the P-trap to the drain pipes. This detaches the P-trap for thorough cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NxccuBcGMAs</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7267-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M2okn4KT18o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unclog the Drain Hose — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Insert a long, flexible drain cleaning brush into the larger of the two exposed tubes. This tube leads from the air gap to the garbage disposal. Push the brush all the way down the hose, moving it in and out and twisting it to break up the clog. You will feel when it has passed through the clog into the main sink drain. Pull the brush back up to remove the dislodged gunk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M2okn4KT18o</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7268-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WYKlX7fLzMs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Testing the Repair — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>With everything reassembled, the repair must be tested. Turn on the water and visually inspect all connections underneath the sink for any drips. To perform a more thorough test, insert the sink stopper and fill the sink basin completely with water. This puts significant weight and pressure on the new seal. Then, pull the stopper and let the large volume of water rush through the drain, checking for leaks again. Once confirmed leak-free, use a finger to wipe away the excess plumber&apos;s putty that squeezed out around the drain flange inside the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WYKlX7fLzMs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7268-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gRVMcuk8LQU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten and Reconnect Plumbing — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>While holding the strainer in place from above to keep it aligned, use channel-lock pliers to tighten the locknut underneath the sink until it is snug. Do not over-tighten. You should see a small amount of plumber&apos;s putty squeeze out around the flange in the sink basin. Reconnect the P-trap to the new tailpiece and tighten the slip nut by hand, followed by a final quarter-turn with pliers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gRVMcuk8LQU</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7268-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gRVMcuk8LQU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>From the top of the sink, use your finger or a cloth to wipe away the excess plumber&apos;s putty that squeezed out around the drain. Place the stopper in the drain and fill the sink with a few inches of water. Let it sit for a few minutes. Then, check underneath the sink with a flashlight to ensure there are no drips from the new locknut or the reconnected drain pipe. If everything is dry, release the stopper and let the water drain to check the flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gRVMcuk8LQU</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7269-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wA1r4UT5ODE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall the P-trap — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Reinstall the P-trap and tighten the slip nuts. Ensure all connections are secure to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wA1r4UT5ODE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7269-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/td1ZPqs6KOM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Plumbing — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Reconnect the tailpiece and P-trap to the bottom of the newly installed sink strainer. Slide the slip nuts up and hand-tighten them onto the threads. Ensure the new tailpiece washer is correctly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/td1ZPqs6KOM</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7269-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f8L3Ha8u5-k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the P-Trap — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Now that the offset fitting has corrected the alignment, you can assemble the rest of the P-trap. Attach the tailpiece extension to the bottom of the sink drain. Then, connect the J-bend (the U-shaped portion of the trap) between the tailpiece extension and the offset fitting. Ensure all washers are properly seated before hand-tightening the slip nuts to create secure, leak-proof seals.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f8L3Ha8u5-k</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7266-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NuiaqKXdcqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Old P-Trap Removal — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Begin by placing a large bucket or basin directly underneath the existing P-trap to catch any water that will be released upon disassembly. Using a pair of channel-lock pliers, grip the slip-joint nuts connecting the P-trap to the vertical tailpiece from the sink and the horizontal drain arm going to the wall. Turn the nuts counter-clockwise to loosen them. Once loose, finish unscrewing them by hand and carefully lower the P-trap, allowing the trapped water to drain into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NuiaqKXdcqg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7266-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r25zMpTPotA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove P-Trap and Clear Blockage — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Wearing protective gloves, slowly loosen the slip nuts on both ends of the P-trap by turning them counter-clockwise. These can typically be loosened by hand. As the seals break, water will begin to drain into the bucket. Carefully lower and remove the P-trap section. A large volume of water will likely gush out. Once drained, inspect the removed pipe for the clog and clear it out. The clog is often a buildup of grease and food particles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r25zMpTPotA</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7266-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XlUYVSeZ8hs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove P-Traps — How to Clean Out a Bathroom Sink P-Trap</video:title>
      <video:description>Place a tray or bucket under the P-traps to catch any water remaining in the pipes. Loosen the slip nuts on both ends of each P-trap by turning them counter-clockwise. Since these are plastic, they can often be loosened by hand. If they are too tight, use a pair of channel-lock pliers. Once the nuts are loose, remove both P-traps and empty any water into the tray.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XlUYVSeZ8hs</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7176-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TkZ1hCcYJtc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Prepare the Pipe — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Using a pipe cutter, remove the damaged section of the copper pipe. Make two cuts, one on each side of the pinhole, to completely remove the compromised area. After cutting, use a deburring or reaming tool to clean the sharp edges from the inside and outside of the remaining pipe ends. This ensures a smooth surface for the new fittings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TkZ1hCcYJtc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7176-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jHOal59RktY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Copper Pipes — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Using a manual pipe cutter, make two clean cuts on the copper pipes that lead to and from the water softener location. To do this, clamp the pipe cutter onto the pipe, ensuring the cutting wheel is aligned. Tighten the knob slightly and rotate the tool around the pipe. Continue to incrementally tighten the knob and rotate the cutter until the pipe is completely severed. Deburr the inside and outside of the cut edges to ensure a smooth surface for the new fittings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jHOal59RktY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7176-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-eghddlwA5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean, Measure, and Cut Pipe — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>While the removed fitting is still hot, use a pipe cleaning brush to clean out any remaining old solder from the inside. Then, use a tape measure and marker to mark the pipe where it needs to be cut. Secure a tubing cutter onto the mark, then rotate it around the pipe, tightening the blade slightly with each rotation until the pipe is cleanly cut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-eghddlwA5s</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7178-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AtnE_Zg18mw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Repair Coupling — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>To install the fully assembled fitting, first apply purple primer to one end of the existing pipe and the inside of the corresponding coupler. Follow with a coat of clear cement on both surfaces. Slide the fitting onto the pipe with a quarter-turn twisting motion. Next, apply primer and cement to the other pipe end and the inside of the telescoping part of the fitting. Telescope the fitting outward to cover the second pipe end, again using a quarter-turn twist. Hold the entire assembly firmly in place for at least 20-30 seconds to ensure a strong bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AtnE_Zg18mw</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7178-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N1w3DXdn3sk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Pipe Sections — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Insert the longer sections of copper pipe into the open ends of the couplings that were just installed. Push the pipes together firmly to ensure they are fully seated. This step assembles the main pipe runs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N1w3DXdn3sk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7178-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9rEfGa7iqNU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Flux and Assemble Repair — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Apply a thin, even layer of the soldering paste (flux) to all the surfaces you just cleaned: the outside of the existing pipe ends, both ends of the new pipe piece, and the inside of the couplings. Once flux is applied, assemble the repair. Slide one coupling onto an existing pipe end, insert the new pipe piece into that coupling, and then slide the second coupling on to connect the new pipe to the other existing pipe end. Push all components together firmly to ensure they are fully seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9rEfGa7iqNU</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7179-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RpD39U-FidI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Prepare New Pipe Sections — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Measure and cut new sections of copper pipe as needed. Use a deburring tool to smooth the sharp edges on both the inside and outside of the cut pipe. Mark the pipe with a marker to indicate the proper insertion depth for the press fittings, ensuring a complete and secure connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RpD39U-FidI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7179-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VfNVkTmyxn4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify the Problem of Improper Insertion — How to Make a Quick Pipe Repair with Push-to-Connect Fi</video:title>
      <video:description>The video first illustrates a common failure point: inserting a pipe into a push-to-connect fitting without it being fully seated. When water pressure is applied, this incomplete connection results in a leak. This highlights the necessity of a visual guide to confirm the pipe is inserted to the correct depth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VfNVkTmyxn4</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7179-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r_4S5pN2yXg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark New Pipe — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Once the old pipe is completely drilled out, use a tape measure to determine the depth of the fitting&apos;s socket. Then, take a new piece of 2-inch ABS pipe and use the tape measure and a pencil to mark the insertion depth on the pipe. This ensures you know how far to insert it during the gluing process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r_4S5pN2yXg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7180-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A-_rnlXNPDY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Damaged Pipe Section — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Using a pipe cutter, cut the copper pipe on one side of the hole left by the old valve. Then, use a marker and the new valve fitting to measure where the second cut needs to be made. Make the second cut with the pipe cutter to completely remove the damaged section of the pipe, leaving a gap for the new T-stop valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A-_rnlXNPDY</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7180-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ItK5KEBaX3I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate and Cut Pipes — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>For each pipe, use a tape measure to determine the distance between the two marks you made. Add 1/8th of an inch to this measurement. This final calculated length is the amount that needs to be cut off the end of the pipe. Mark this cut line clearly around the circumference of the pipe. Using a reciprocating saw for the smaller pipe and an angle grinder for the larger one, carefully cut each pipe at the marked line. Repeat the entire process for the second pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ItK5KEBaX3I</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7180-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PGeQwFiii-Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Remove Pipe Section — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Measure the length needed for the new slip tee fitting to determine the size of the pipe section to remove (typically around 2 inches). Mark the cut lines on the copper pipe. Using a mini tube cutter, clamp it onto the first mark, tighten it, and rotate it around the pipe, tightening progressively until the pipe is cut. Repeat for the second mark to remove the section of pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PGeQwFiii-Y</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7181-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C7WrQseB8DM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deburr and Clean the Pipe — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>After cutting, the end of the pipe will have sharp burrs. Use a deburring tool or fine-grit sandpaper (like the P220 grit shown) to smooth the inside and outside edges of the cut. This is crucial to prevent damage to the fitting&apos;s internal O-ring. Once smooth, use a clean cloth to wipe away any copper shavings and debris from the end of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C7WrQseB8DM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7181-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qaqhimAcNwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deburr Copper Pipe — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>After the copper pipe has been cut to the desired length, use a deburring tool to smooth out the cut edge. Insert the tool into the pipe and rotate it to remove any sharp burrs from the inside surface. Then, use the outside portion of the tool to smooth the outer edge. The video features a RIGID brand deburring tool for this task. This step is critical to prevent damage to the O-ring inside the push-fit fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qaqhimAcNwE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7181-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jEkV4bVR9PM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Copper Pipes — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Cut out the old copper pipes using a pipe cutter. Prepare the ends of the existing copper pipes by cleaning them thoroughly with an emery cloth to remove any oxidation or debris. Deburr the inside of the pipe ends to ensure a smooth surface for soldering and a good connection. Deburr the outside of the pipe ends using a deburring tool.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jEkV4bVR9PM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7175-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QJ_Stx8tXys/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Pipes — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Before starting work on the plumbing, locate and shut off the main water supply to the house. To minimize water spillage when you remove the old valve, open a faucet at the lowest point of the dwelling, such as a basement laundry tub or an outdoor spigot, to drain as much water as possible from the pipes. Once the water is off and the lines are drained, you can proceed with removing the old valve and supply line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QJ_Stx8tXys</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7175-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nfTFngwM_pQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Locate the main water shut-off valve for the residence and turn it to the off position. To ensure the water is off and to relieve pressure, open a nearby faucet, such as a bathroom sink, and let the water drain out completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nfTFngwM_pQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7175-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4-gw-gWqbJw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off the Main Water Supply — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Locate the main water shut-off valve for the house, which is typically found in the basement or a utility closet where the water line enters the home. Turn the valve handle clockwise until it is fully closed to stop the flow of water into the house&apos;s plumbing system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4-gw-gWqbJw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7177-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wSk0mmrR9qg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Test for Leaks — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Slowly turn the main water supply back on. Return to the faucet and turn the handle to open it. Check for proper water flow. Then, turn the handle to the off position. Observe the spout to ensure that after the initial drainage from the pipe, the dripping stops completely, confirming a successful repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wSk0mmrR9qg</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7177-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wM-6bgV7G5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shutting Off Water and Installing Shutoff Valve — How to Make a Quick Pipe Repair with Push-to-Conne</video:title>
      <video:description>First turn off your house&apos;s main water valve. Next, open the faucet or the fixture you&apos;re working on to drain as much remaining water from the pipes as possible. Use emery cloth to clean the pipe. Once the main water line is off, take the compression stop, which comes in three parts: nut, a brass ring, and the fitting. Measure the pipe to fit the length of the compression stop. Use a tubing cutter to cut the pipe at the marked spot.  Screw in the nut and the brass ring that will hold it in place. Snug the connection and then tighten with two wrenches. Make sure everything is completely closed. Turn the main water supply valve back on, and open the faucet or fixture. Let the water run to ensure that the connection is holding tight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wM-6bgV7G5s</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7177-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qLRfdVDYMjc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water and Test Faucet — How to Make a Quick Pipe Repair with Push-to-Connect Fittings</video:title>
      <video:description>Go to the main water shut-off valve for the house and slowly turn it back on. Return to the shower and test the faucet&apos;s operation. Turn the handle to check for both hot and cold water flow. Check around the handle and escutcheon plate for any leaks. Once confirmed that the faucet is working correctly and not leaking, the job is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qLRfdVDYMjc</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7140-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NjH-eCdk9Rs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain and Remove the Toilet Tank — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>To begin the repair, you must first drain the toilet tank. Turn off the water supply using the shut-off valve behind the toilet. Flush the toilet to empty most of the water. Use a sponge or towel to soak up the remaining water in the tank. Next, disconnect the water supply line from the bottom of the fill valve. Finally, unscrew the nuts from the tank bolts located underneath the toilet bowl to separate the tank from the bowl. Carefully lift the tank off and place it on a protected surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NjH-eCdk9Rs</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7140-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7h-AWtQH_Rg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>Begin by shutting off the water supply and flushing the toilet to drain the tank. Disconnect the water supply line from the fill valve. Unscrew the nuts from the tank-to-bowl bolts located underneath the tank rim. Once the bolts are free, carefully lift the tank straight up and off the toilet bowl. Carry the tank to a suitable work area, like outside or to a workbench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7h-AWtQH_Rg</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7140-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dhs0IxhCgbc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Disassemble the Toilet Tank — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>First, you must prepare the toilet tank for the repair. Shut off the water supply using the valve located behind the toilet. Flush the toilet to empty the tank of as much water as possible. Use a sponge to soak up any remaining water. Once empty, disconnect the water supply line and unbolt the tank from the toilet bowl. Carefully lift the tank and place it on a protected surface, such as a drop cloth. Thoroughly clean the inside and outside of the tank, paying special attention to the cracked area to remove all dirt, grime, and mineral deposits. It is crucial that the tank is completely dry before proceeding to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dhs0IxhCgbc</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7144-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c3IL4Qhepmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Flush — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>After working the auger through the trap, leave the tool in place and flush the toilet. If the clog has been successfully cleared, the water will drain quickly and with a powerful, normal swirl. This confirms that the blockage has been removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c3IL4Qhepmc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7144-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5KlHi-iTjp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Flush — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>Once you notice the water in the toilet bowl receding, it indicates that the clog has been at least partially cleared. At this point, you can test the drain by flushing the toilet. If the water flushes down normally, the clog has been successfully removed. If it still drains slowly or not at all, you may need to repeat the augering process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5KlHi-iTjp0</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7144-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6dGi9WUzNTA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Toilet Flush — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>After removing the auger from the toilet, perform a test flush to check if the clog has been successfully cleared. If the water drains quickly and completely, the job is done. It&apos;s a good idea to flush the toilet several more times to ensure the blockage and any remaining debris are fully washed down the drain line. If the toilet remains clogged, you may need to repeat the augering process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6dGi9WUzNTA</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7143-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ALeg4xxIVy4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect and Adjust Flush Chain — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>Take the end of the flapper chain and hook it onto one of the holes on the new flush arm. The goal is to have only a very slight amount of slack in the chain when the flapper is closed. If the chain is too tight, the flapper won&apos;t seal, causing the toilet to run. If it&apos;s too loose, you won&apos;t get a full flush. After connecting the chain, press the handle to test the mechanism. Watch to see that it lifts the flapper completely and then allows it to drop and seal properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ALeg4xxIVy4</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7143-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tfn39YMaco4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Toilet Tank Internals — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>Begin by removing the toilet tank lid to access the internal components. First, check the water level; it should be about a half-inch below the top of the overflow tube. Next, inspect the flapper chain. It should not be pulled taut. There needs to be a small amount of slack in the chain to allow the flapper to rest completely flat on the flush valve seat and create a proper seal. If the chain is too tight, it will hold the flapper slightly open, causing a slow leak.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tfn39YMaco4</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7143-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TM3JiVhQXFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check and Adjust the Lift Chain — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>Finally, check the lift chain that connects the flush handle arm to the flapper. If this chain is disconnected, too loose, or too tight, the toilet will not flush correctly. A loose chain won&apos;t lift the flapper high enough, while a tight chain can prevent it from sealing. Reconnect the chain if it&apos;s detached, or adjust its length to provide approximately a half-inch of slack. If the chain is broken, it must be replaced with a new one.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TM3JiVhQXFk</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7141-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tVPoN8efFSM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Mineral Buildup — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>To clear the obstruction, use a small, hard tool, such as the nail set shown in the video. Carefully insert the tool into the siphon jet hole and begin scraping the sides. The mineral buildup is typically grainy and will break up as you scrape. Continue this process, working your way around the entire inner surface of the hole, until the surface feels smooth again. The loosened debris can be flushed down the toilet; it does not need to be manually retrieved from the bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tVPoN8efFSM</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7141-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bys-H_v-hYY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the tub spout — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>Soak the tub spout in CLR mixed with water to loosen and break free mineral deposits and clean up the tub spout. If you have vinegar on hand you can try to use that as well as that could break up the mineral deposits. Use an old toothbrush to remove the mineral deposits.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bys-H_v-hYY</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7141-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/G0Mhgu7UjQA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Aerator with Vinegar — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>Take the removed aerator and place it in a small cup or glass. Pour enough white vinegar into the cup to completely submerge the aerator. Let it soak for at least an hour to allow the acetic acid in the vinegar to break down and dissolve the calcium and mineral deposits clogging the small holes. For very heavy buildup, you can let it soak overnight. After soaking, you can use an old toothbrush to scrub any stubborn particles away.</video:description>
      <video:player_loc>https://www.youtube.com/embed/G0Mhgu7UjQA</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7142-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gq3HIvsqbjQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Water Level — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>After removing the toilet tank lid, look inside to find the water level mark, which is usually a line with &apos;WL&apos; written next to it. Compare the current water level to this mark. In the video, the water is clearly below the required level, indicating an adjustment is needed for proper flushing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gq3HIvsqbjQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7142-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/deNUNxkxZuE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose the Problem — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>If your toilet seems to run for a long time after flushing, the water level may be too high. To check, carefully remove the heavy ceramic toilet tank lid and set it aside. Look inside the tank for a marked water line or a stain line from the previous water level. If the current water level is above this line or is spilling into the central overflow tube, it needs to be adjusted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/deNUNxkxZuE</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7142-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qAY4ZWVXiYQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Toilet Water Level — How to Troubleshoot a Weak Flushing Toilet</video:title>
      <video:description>Look inside the toilet tank to check the water level. A properly set level should be approximately one inch below the top of the overflow tube. If the water is too high, it will continuously flow into the overflow tube and down the drain, wasting water without being easily noticeable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qAY4ZWVXiYQ</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7134-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hkLOk74lRe0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Sink Flange — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>Take a generous amount of plumber&apos;s putty and roll it between your hands to form a rope about 1/2 inch thick. Wrap this putty rope around the underside of the new sink flange. Place the flange into the drain opening from the top of the sink and press down firmly and evenly to create an initial seal. Place a heavy object on the flange to keep it in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hkLOk74lRe0</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7134-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N4Uv6vGHmuI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Sink Flange with Plumber&apos;s Putty — How to Replace a Garbage Disposal and Install a Stand</video:title>
      <video:description>Take a generous amount of plumber&apos;s putty and roll it between your hands to form a uniform rope about 1/2-inch thick. Apply this rope of putty evenly around the entire underside of the new sink flange&apos;s lip. Carefully press the flange firmly down into the sink drain opening, ensuring it is centered and fully seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N4Uv6vGHmuI</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7134-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HK8wLbs9bSE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Strainer and Mount Pump — How to Replace a Garbage Disposal and Install a Standard Sink Drai</video:title>
      <video:description>Insert the putty-lined strainer into the sink&apos;s drain opening. From underneath the sink, slide the required rubber gasket, fiber gasket, and O-ring onto the strainer&apos;s threads in the correct order. Screw the laundry tray pump assembly onto the strainer&apos;s threads until hand-tight. Use large channel-lock pliers to give it a final tightening, ensuring a secure, leak-proof connection between the sink and the pump.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HK8wLbs9bSE</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7135-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/swKQGdjDQbQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Connect Drain Pipes — How to Replace a Garbage Disposal and Install a Standard Sink Drai</video:title>
      <video:description>Begin by dry-fitting the P-trap and all PVC drain pipe components to ensure a proper fit between the sink&apos;s tailpiece and the drain stub-out in the wall. Once you confirm the fit, disassemble the parts. Use a deburring tool to clean the inside and outside edges of the pipe. Apply PVC primer to the outside of the pipe ends and the inside of the fittings that will be joined. Follow immediately with a layer of PVC cement. Firmly push the pipe into the fitting, giving it a quarter-turn twist to spread the cement evenly. Hold the joint for about 30 seconds to allow it to set. Connect the assembled P-trap to the sink&apos;s tailpiece, ensuring the slip nuts are hand-tightened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/swKQGdjDQbQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7135-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJ6BM9Ac2sQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install P-Trap — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>Measure the length needed for the P-trap arm to connect the sink&apos;s tailpiece to the PVC waste drain in the wall. Use a hacksaw to cut the chrome P-trap pipe to the measured length. Assemble the P-trap by first inserting the slip nuts onto the tailpiece, then fitting the rubber washer. Insert the cut P-trap arm into the PVC drain pipe, and then slide the tailpiece into the P-trap. Hand-tighten all the slip nuts to connect the components and check for leaks before final tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJ6BM9Ac2sQ</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7135-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-2LrWTj9Oh0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Assembly — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>Install the drain assembly, which is applicable to both top-mount and undermount sinks. From inside the basin, insert the strainer ring and strainer bowl into the drain opening. From underneath the sink, place the rubber washer over the strainer threads, followed by the locknut. Hand-tighten the locknut, then use a wrench to fully secure it. Finally, attach the plastic joint and the connecting nut which will connect to the P-trap assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-2LrWTj9Oh0</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7136-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zx1dpHQBGjA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Mounting Bracket — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>To reinstall the mounting assembly, first apply a rope of plumber&apos;s putty around the underside of the new strainer flange, or use an upper sink flange seal. Insert the flange into the sink drain opening. From underneath the sink, place the lower sink flange seal and the flange mounting plate over the strainer flange. Position the mounting bracket against the plate and hold it up while you snap the mounting ring into the groove on the strainer flange. Evenly tighten the three screws on the bracket to secure the assembly. Scrape away any excess plumber&apos;s putty from inside the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zx1dpHQBGjA</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7136-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jMVPi18RwSQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Tightening and Cleanup — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>Once the snap ring is securely in place, use a flathead screwdriver or a drill to tighten the three screws on the mounting ring evenly. As you tighten the screws, the assembly will pull up against the sink, squeezing out excess plumber&apos;s putty from around the flange in the sink basin. Continue tightening until the flange is snug and sealed. Finally, use your finger or a putty knife to remove and discard the excess putty from the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jMVPi18RwSQ</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7136-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N4Uv6vGHmuI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Mounting Assembly — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>From underneath the sink, place the fiber gasket, then the backup flange, and finally the mounting ring over the neck of the newly installed sink flange. While pushing up on the mounting ring, install the snap ring into the groove on the sink flange to hold the assembly in place. Use a screwdriver to evenly tighten the three screws on the mounting ring, which will compress the assembly and squeeze out excess putty. Wipe away the excess putty from inside the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N4Uv6vGHmuI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7139-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KmrzED7u-N0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Pipe and Drain Sink — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>With the bucket in place, proceed to disconnect the drain pipe. Locate the plastic slip nuts that connect the P-trap assembly to the garbage disposal&apos;s outlet. These can usually be loosened by hand. Turn them counter-clockwise to unscrew them. You may need to undo connections on both sides of the elbow joint. Once loose, carefully pull the pipe away from the disposal. The backed-up water from the sink will immediately start draining into the bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KmrzED7u-N0</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7139-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fg7C1z19AKc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect the Drain Hose — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>Begin by locating the dishwasher drain hose where it connects to the side of the garbage disposal unit under the sink. Using a flathead screwdriver, turn the screw on the hose clamp counter-clockwise to loosen it. Once the clamp is loose, you can slide it back along the hose. Carefully but firmly wiggle and pull the end of the drain hose off the garbage disposal&apos;s inlet nozzle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fg7C1z19AKc</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7139-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/60n9ZbZK6wc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Drain Hose — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>The dishwasher&apos;s drain hose needs to be disconnected from the sink&apos;s plumbing. It is often connected to a port on the garbage disposal. Find this connection and use a flathead screwdriver or a nut driver to loosen the metal hose clamp that secures the rubber drain hose. After loosening the clamp, carefully wiggle and pull the hose off the connection port. Immediately direct the open end of the hose into your bucket, as it will contain dirty, residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/60n9ZbZK6wc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7137-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JmQCJ9m-F_s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen and Remove the Mounting Ring — How to Replace a Garbage Disposal and Install a Standard Sink </video:title>
      <video:description>The video demonstrates how the garbage disposal is attached to the sink flange. A metal locking ring is positioned over three hooks on the flange. To secure the unit, this ring is rotated, causing it to ride up angled ramps and tighten. To remove the unit, you must reverse this process. Insert a flathead screwdriver into one of the lugs on the locking ring. While firmly supporting the weight of the disposal, apply rotational force to the screwdriver to turn the ring counter-clockwise. As the ring turns, it will disengage from the hooks, allowing the entire disposal unit to be lowered straight down and removed from the mounting assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JmQCJ9m-F_s</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7137-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GqzUhZBpYtc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Disposal Unit — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>Support the weight of the garbage disposal with one hand. With your other hand or a disposal wrench, turn the lower mounting ring counter-clockwise about a quarter turn. This will disengage the unit from the three tabs on the sink flange assembly. Carefully lower the heavy unit and remove it from the cabinet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GqzUhZBpYtc</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7137-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iJ9nbu4aKRM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Detach Garbage Disposal — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>To detach the garbage disposal, you need to turn the lower mounting ring counter-clockwise. If it is stuck, carefully use a hammer to tap one of the tabs on the ring to break it loose. Once loose, support the weight of the disposal with one hand while twisting the ring with the other. The disposal will drop down once it is free from the mounting tabs. Carefully lower it to the cabinet floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iJ9nbu4aKRM</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7138-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q4n39CiBTPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Installation — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>The final step is to test the installation. Turn the power back on at the circuit breaker. Run cold water into the sink and then turn on the garbage disposal. Let it run for a moment while you thoroughly check all the plumbing connections for any signs of leaks. Check around the sink flange, the dishwasher hose connection, and the main drain pipe connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q4n39CiBTPI</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7138-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/916MXTClmNw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Drain and Check for Leaks — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>Once everything is reassembled, test the stopper to ensure it operates correctly. Then, turn on the faucet and let water run to confirm that the drain is clear and flowing quickly. While the water is running, perform a final check under the sink to ensure there are no leaks from the connections you worked on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/916MXTClmNw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7138-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zwyb-IvczXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Water On and Check for Leaks — How to Replace a Garbage Disposal and Install a Standard Sink Dr</video:title>
      <video:description>Once the installation is complete and all connections are tight, it&apos;s time to check for leaks. First, ensure all taps that you opened are now closed. Go to your main water shut-off valve and turn it back on slowly. Listen for the sound of water filling the pipes. Return to your work area and carefully inspect each of the new joints for any signs of dripping water. Use a dry paper towel to wipe the joints, which will make even the smallest leak visible. If you find a leak, turn the water off again and slightly tighten the connection before re-testing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zwyb-IvczXw</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7133-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tYyx-wvN6z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Water Shut-off — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>The first step is to prepare the work area and ensure the water is turned off. Access the main shut-off valves for the sink, which are located behind a small access door in the cabinet. Turn the valves to the off position to stop the flow of water to the copper stub-outs. Place cardboard or towels on the cabinet floor to protect the surface and absorb any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tYyx-wvN6z4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7133-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wo-WKiC2yrQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Old Disposal — How to Replace a Garbage Disposal and Install a Standard Sink D</video:title>
      <video:description>Begin by ensuring the garbage disposal is unplugged from the wall outlet to cut all power. Place a bucket or towels underneath the plumbing to catch any residual water. Proceed to disconnect the dishwasher drain hose and the main drain pipe from the old disposal. This may require loosening clamps or unscrewing slip nuts. Once all plumbing is disconnected, support the weight of the disposal and twist the mounting ring counter-clockwise to release the unit from the sink flange. Carefully lower and remove the old disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wo-WKiC2yrQ</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7133-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s38CjwBKZ34/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — How to Replace a Garbage Disposal and Install a Standard Sink Drain</video:title>
      <video:description>First, prepare your work area. Clear out any items stored under the sink to give yourself plenty of room to work. Place a bucket directly underneath the J-shaped pipe, which is the P-trap. This is essential for catching the water and debris that will be released when you disconnect the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s38CjwBKZ34</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7086-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m1sgAQdDd94/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Leverage to Unscrew Drain — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>With the pliers wedged in the drain, insert a sturdy pry bar or flat bar between the plier handles. Using the bar as a lever, apply slow, steady, counter-clockwise pressure to turn the pliers and unscrew the drain. You may need to reposition the bar and apply force multiple times to break the drain free, as shown by the repeated attempts in the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m1sgAQdDd94</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7086-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zUDUA2jf854/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Removing the Drain with a Hammer Claw — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>The successful method for removal involves using the claw of a hammer. The claw is inserted into the drain opening, positioned to hook underneath the lip of the drain flange. By applying upward pressure and turning the hammer counter-clockwise, the old drain is successfully loosened and unscrewed from the drain pipe. The process requires patience and steady force. The old, corroded drain is then fully removed from the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zUDUA2jf854</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7086-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/brsFISgx6fM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Drain — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>The first step is to remove the old, corroded drain. Insert a pair of heavy-duty needle-nose pliers into the crossbars of the drain. Spread the handles of the pliers apart so they press firmly against the inside of the drain. Then, use an adjustable wrench to grip the handles of the pliers and turn them counter-clockwise to unscrew and remove the entire drain assembly. Upon removal, clear any clogs, such as hair, that come out with the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/brsFISgx6fM</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7090-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TypkRE63zlM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Main Drain Flange — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Take a generous amount of plumber&apos;s putty and roll it into a rope-like shape. Apply this putty rope to the underside of the main drain flange. Insert the flange into the drain opening from inside the tub. From underneath the tub, screw the drain shoe onto the threads of the drain flange. Use a wrench and a screwdriver inserted through the crossbars of the flange to tighten the connection securely, which will cause the excess putty to squeeze out. Clean up the excess putty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TypkRE63zlM</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7090-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pWlNvLxj874/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten and Clean Up — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Once hand-tight, use a screwdriver or drain key to finish tightening the new drain. Insert the tool into the crossbars of the new drain and turn clockwise until snug. Be careful not to overtighten. Clean up any excess plumber&apos;s putty that squeezed out from under the flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pWlNvLxj874</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7090-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LxUDlUwgpTY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall the Drain Flange — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Carefully place the drain flange back into the drain opening in the tub. Begin by threading it clockwise by hand to ensure it&apos;s not cross-threaded. Once it&apos;s started, use the drain key to tighten it the rest of the way. Tighten it until it is snug and you see the excess plumber&apos;s putty squeeze out from under the rim.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LxUDlUwgpTY</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7087-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HjQVuJ_zUWM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Drain Fitting — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Apply a thick ring of plumber&apos;s putty around the underside of the new drain fitting&apos;s flange. Insert the new brass fitting into the drain opening from inside the tub. From below, attach the gasket and thread on the new drain shoe. Use a drain wrench from above and pliers from below to tighten the assembly until the excess putty squeezes out, creating a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HjQVuJ_zUWM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7087-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/He4nwBI4iXs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Tighten the Drain Assembly — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Gently place the flange with the putty into the drain opening of the sink. From underneath the sink, insert the threaded tailpiece up into the flange. Begin to hand-tighten the tailpiece, which will pull the flange down against the sink. This action compresses the putty, creating the seal. Continue tightening until the flange is snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/He4nwBI4iXs</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7087-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DeuxJfDQGSc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Drain Nut — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>With the drain hand-tightened, use a pair of channel-lock pliers or a pipe wrench to give the mounting nut a final tightening. A quarter to a half turn past hand-tight is usually sufficient. Be cautious not to over-tighten, as this can crack the plastic nut or the drain body. As you tighten, excess plumber&apos;s putty will squeeze out around the drain flange inside the sink. This is normal and indicates a good seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DeuxJfDQGSc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7088-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gj2XUMuBsKo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Pop-Up Stopper Assembly — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>With the cover nut removed, insert a flathead screwdriver into the screw at the center of the pop-up stopper. Turn the screwdriver counter-clockwise (to the left) to loosen the screw completely. Once loosened, pull the entire stopper assembly straight up and out of the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gj2XUMuBsKo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7088-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jxvtjPwg8xU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access the Drain by Removing the Stopper — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>First, identify that the tub drain is backing up. Understand that there are various types of drain stoppers, such as screw-in, Allen key, or those with a trip lever. For this specific push-down, screw-in stopper, simply unscrew it counter-clockwise by hand to remove it and gain access to the drain&apos;s crossbars where clogs form. It&apos;s recommended to wear gloves for this process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jxvtjPwg8xU</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7088-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-ndRtFGGfoo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Bathtub Drain Flange — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>From inside the bathtub, remove the drain stopper if one is present. Many stoppers simply unscrew, while others may have a small set screw. Once the stopper is out, you will see the drain flange with metal crossbars inside. To remove it, insert the tips of a pair of pliers or a specialized drain wrench into the crossbars to get a grip. Turn the tool counter-clockwise to unscrew the entire drain flange from the drain shoe below the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-ndRtFGGfoo</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7089-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UI4x9GU-h6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Excess Putty — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Once the drain flange is fully tightened, use a small screwdriver, a plastic putty knife, or your finger to wipe away the excess plumber&apos;s putty that has squeezed out around the flange. Be careful not to scratch the surface of the bathtub. A cloth can be used for the final wipe-down for a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UI4x9GU-h6E</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7089-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3xONh3qfDD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up and Reconnect P-Trap — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Once the drain flange is securely tightened, use your finger or a putty knife to wipe away all the excess plumber&apos;s putty that has squeezed out around the flange inside the tub. Finally, go underneath the tub and reconnect the P-trap assembly by threading its slip nut onto the bottom of the new drain flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3xONh3qfDD4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7089-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XpJAsRaKKeE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare the Drain Pipe — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>After all the pieces of the old flange have been removed, use a rag to wipe the inside of the main drain pipe clean. If there are any rough spots or remaining bits of old glue, you can use sandpaper to smooth the surface. Once the pipe is clean and smooth, carefully retrieve the rag and all the collected PVC debris from the drain. The opening is now prepared for the installation of a new toilet flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XpJAsRaKKeE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7085-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xKL3FHh1GZo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Once the tub is in place, test the installation. Turn on the tub faucet and let water flow into the basin. Observe the drain to ensure water is flowing down properly and check around the base of the tub and in the space below (if accessible) for any signs of leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xKL3FHh1GZo</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7085-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GfZgVIAdlVg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>The final step is to thoroughly test the repair. Turn on the water, letting it run into the sink. Use the side valve to close the drain, allowing the sink basin to fill with a few inches of hot water. This puts pressure on the new seals. Carefully inspect the entire drain assembly underneath the sink, including the flange seal, the gasket, and the new PVC coupling. Look and feel for any drips of water. Once confirmed that there are no leaks, the repair is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GfZgVIAdlVg</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7085-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-ndRtFGGfoo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Drain Flange and Test for Leaks — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Return to the inside of the bathtub. For the best seal, apply a thin rope of plumber&apos;s putty to the underside of the drain flange rim. Carefully align the drain flange with the drain shoe below and begin threading it in clockwise by hand. Once it&apos;s snug, use your pliers or drain wrench to tighten it fully. Be careful not to overtighten and crack the tub or strip the threads. Clean away any excess plumber&apos;s putty that squeezes out. Reinstall the drain stopper. Finally, fill the tub with water again and drain it while checking underneath for any leaks to confirm the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-ndRtFGGfoo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7091-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kf2NOzODTNg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Plumber&apos;s Putty — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Take a generous amount of plumber&apos;s putty from the container. Roll it between your hands to form a rope-like shape. Press this rope of putty firmly into the recess around the drain opening, creating a complete ring of sealant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kf2NOzODTNg</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7091-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OhjWW34kxEs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Plumber&apos;s Putty to New Strainer — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Take a generous amount of plumber&apos;s putty from its container and roll it between your hands to form a uniform rope, approximately 1/8 inch thick. Carefully apply this rope of putty around the entire underside of the new basket strainer&apos;s flange, which is the part that will sit inside the sink. Press the putty down slightly to ensure it adheres well. This putty will create the primary waterproof seal between the strainer and the sink basin.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OhjWW34kxEs</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7091-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JFXh_DnCG-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place Plumber&apos;s Putty on Strainer &amp; Place in Sink — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Take a generous amount of plumber&apos;s putty and roll it between your hands to form a rope-like shape, about the thickness of a pencil. Wrap this putty rope around the underside of the strainer&apos;s flange. Place the strainer into the sink&apos;s drain opening and press down firmly and evenly. This action will cause the excess putty to squeeze out around the edges, which is normal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JFXh_DnCG-M</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7084-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1Q2dmzWiyXA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Drain Opening — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>After removing the old flange, you must clean the bathtub surface thoroughly. Use your fingers or a towel to remove the large, loose pieces of old plumber&apos;s putty. For the hardened, stuck-on residue, carefully use a pocket knife or a plastic scraper to scrape it away from the tub&apos;s surface until it is completely clean and smooth. Wipe away all debris with a rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1Q2dmzWiyXA</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7084-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sv_psMn0tW0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Drain Area — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>After removing the old drain, pry out the old, hardened rubber seal located on the drain pipe just below the bathtub. A screwdriver can be used to break it apart and remove it. Thoroughly clean the bathtub surface around the drain hole and the threads of the drain pipe to ensure a clean surface for the new components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sv_psMn0tW0</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7084-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bsq9LzIWGXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Seal the Bathtub — How to Replace a Bathtub Drain Flange</video:title>
      <video:description>Carefully lift and lower the bathtub into position, aligning the lubricated tailpiece with the floor drain. Guide the tailpiece straight down into the drain flange until the tub rests firmly and level on the floor. Once in place, fill the tub with a few inches of water to test for leaks. After confirming there are no leaks, apply a continuous bead of 100% silicone caulk around the entire base of the tub to create a watertight seal against the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bsq9LzIWGXU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7038-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RFVSR-7GfkU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Water Supply Pipe — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>To remove the old faucet, the water supply must be cut. After ensuring the main water is off, the homeowner uses a compact copper pipe cutter to sever the pipe in the basement that leads to the outdoor faucet. A bucket is placed underneath to catch any residual water that drains from the line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RFVSR-7GfkU</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7038-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gf90CtH0N5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Before starting any work, ensure your safety and prepare the area to prevent messes. Go to your circuit breaker and turn off the power to the garbage disposal. Under the sink, turn the hot and cold water shut-off valves to the off position. Clear all items from the cabinet and lay down towels and place a bucket directly under the pipes to catch any residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gf90CtH0N5w</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7038-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5KGt9k2npKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Line — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>First, ensure the main water is shut off. Place a bucket under the existing angle stop to catch any remaining water. Disconnect the water supply line from the toilet and open the valve, allowing the water to drain completely into the bucket. Once drained, close the valve and place a rag on the floor to absorb any spills.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5KGt9k2npKA</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7044-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QvbuciDzY00/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Final Trim Plate and Handles — How to Convert a 3-Handle Shower Faucet to a Single-Handle Va</video:title>
      <video:description>Once the valve stems are extended, the final trim can be installed. Place the large decorative cover plate, or escutcheon, over the valve body, fitting it against the wall. Then, slide the shower handles onto the newly extended stems. Secure each handle by tightening its integrated set screw, typically located on the side or underside, using an Allen key. This completes the installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QvbuciDzY00</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7044-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EdqlV8gBSRM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Shower Arm — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Slide the decorative flange, known as an escutcheon, onto the new shower arm before installation. Then, carefully insert the threaded end of the new shower arm into the drop ear elbow fitting in the wall. Turn the arm clockwise to tighten it. Hand-tighten until it is snug and pointing downwards at the correct angle. The escutcheon can then be slid flush against the wall to cover the opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EdqlV8gBSRM</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7044-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gwJ2QI_mgq4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Shower Arm — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Slide the new escutcheon plate onto the new shower arm. Apply plumber&apos;s tape to the threaded end of the arm that goes into the wall. Hand-thread the new arm into the wall fitting clockwise until it is snug. Use the handle of a screwdriver for leverage to give it a final tightening turn. Slide the escutcheon plate flush against the tiled wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gwJ2QI_mgq4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7040-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x4x1BN9XddM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access and Remove the Old Valve Body — How to Convert a 3-Handle Shower Faucet to a Single-Handle Va</video:title>
      <video:description>To remove the old valve, you will need to access it from behind the wall. This may involve cutting an access panel in the drywall on the other side of the shower wall. Once you have access, use two pipe wrenches or adjustable wrenches—one to hold the water pipe steady and the other to loosen the union nuts connecting the hot and cold water lines to the valve body. After disconnecting the water lines and the pipes leading to the shower head and tub spout, the old valve can be removed from the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x4x1BN9XddM</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7040-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EdqlV8gBSRM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install PEX Pipe to Valve — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Measure from the stud to the center of the shower valve and transfer that measurement to the top plate of the wall frame. Drill a hole through the top plate at the marked spot. Wrap the threads of the shower valve outlet with Teflon tape. Feed the prepared PEX pipe up through the wall and the new hole. Screw the PEX fitting onto the valve by hand, then use a crescent wrench to tighten it securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EdqlV8gBSRM</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7040-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f1XEkVi3DLo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Valve Cartridge and Guard — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>After all the pipes have been soldered and have cooled down, take the shower valve cartridge and insert it into the valve body. Align it correctly according to the manufacturer&apos;s instructions. Use a screwdriver to tighten the screws that hold the cartridge in place. Finally, place the gray plastic guard over the front of the valve. This guard protects the valve during tiling and also serves as a guide for the finished wall depth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f1XEkVi3DLo</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7045-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YksuwpRH0qA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare New Valve — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Prepare the new Delta valve for installation. First, unscrew the bonnet nut and remove the plastic test cap and internal cartridge. This is crucial to prevent the heat from soldering from damaging these plastic and rubber components. Using a wire brush, clean the inside of the three sockets (hot in, cold in, and shower out) on the valve body to prepare them for soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YksuwpRH0qA</video:player_loc>
      <video:duration>129</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7045-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AtLMlUwVcdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the New Valve Assembly — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Take the old valve assembly to a workbench to use as a template. Measure and cut new half-inch copper pipes to duplicate the original configuration. Before soldering, thoroughly clean the outside of all pipe ends and the inside of all fittings using sandpaper and a pipe cleaning brush. It is critical to also remove the plastic cartridge and rubber stoppers from the new valve body to prevent them from being damaged by the heat of the torch.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AtLMlUwVcdE</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7045-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o-UVrvWbu28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pipe and Fitting Preparation — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Before soldering, prepare all components. Cut the copper pipes for the shower riser and tub spout to the necessary lengths using an auto-cut tool or a standard pipe cutter. Use emery cloth to thoroughly clean the outside ends of the copper pipes and the inside of all fittings, including the valve ports and elbows, until they are shiny. This is crucial for a proper solder joint. Next, using pliers and a screwdriver, remove the plastic valve cartridge and the side stops from the brass valve body to protect them from heat damage during soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o-UVrvWbu28</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7041-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uvQK7WTkKpI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>California Patch — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>For holes larger than fist-sized, create a custom drywall patch using scrap wood as backing. Cut a square of drywall slightly larger than the damaged area.  Cut a smaller square within the larger piece, leaving a frame. Remove the inner square, creating a frame. Secure the wood backing to the wall studs with screws.  Apply a generous amount of drywall compound to the perimeter and inside of the patch, then firmly press the drywall frame into the mud. Use a putty knife to apply more mud and cover the entire patch. Let it dry completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uvQK7WTkKpI</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7041-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgWGtoFualU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drywall Compound Application (Medium Holes) — How to Convert a 3-Handle Shower Faucet to a Single-Ha</video:title>
      <video:description>For medium-sized holes, apply a thin layer of drywall compound to the hole. Then, place patching tape over the hole, and smooth it over with the taping knife. Apply a second thin coat of drywall compound, feathering the edges to blend with the surrounding wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgWGtoFualU</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7041-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uvQK7WTkKpI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>California Patch — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>For holes larger than fist-sized, create a custom drywall patch using scrap wood as backing. Cut a square of drywall slightly larger than the damaged area.  Cut a smaller square within the larger piece, leaving a frame. Remove the inner square, creating a frame. Secure the wood backing to the wall studs with screws.  Apply a generous amount of drywall compound to the perimeter and inside of the patch, then firmly press the drywall frame into the mud. Use a putty knife to apply more mud and cover the entire patch. Let it dry completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uvQK7WTkKpI</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7046-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PMEVFDfiSiw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Faucet Handle — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Using a small flathead screwdriver, carefully pry off the decorative cap from the center of the shower handle. This will expose the handle&apos;s retaining screw. Then, use a Phillips head screwdriver to remove the screw. Once the screw is out, you can pull the handle straight off the valve stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PMEVFDfiSiw</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7046-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MFostSPH6rs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Begin by prying off the decorative cap from the end of the shower handle using a flathead screwdriver. This will reveal the central retaining screw. Use a Phillips head screwdriver to remove this screw, then gently pull the handle straight off the splined faucet stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MFostSPH6rs</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7046-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FDqdTwgr4eo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Handle — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Locate the small set screw on the underside of the shower handle. Insert the correct size Allen wrench into the screw and turn it counter-clockwise to loosen it. It is not necessary to fully remove the screw. Once the handle is loose, pull it straight off the valve assembly to expose the inner components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FDqdTwgr4eo</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7043-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bUKEPB50E6w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Before full reassembly, check for leaks. Temporarily install the handle. Go back to the main water valve and turn it back on. Open other faucets in the house to bleed air from the system until a steady stream flows, then turn them off. Return to the shower, turn the handle on and off, and carefully inspect around the collar and cartridge for any signs of dripping water. If there are no leaks, you can proceed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bUKEPB50E6w</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7043-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q6a9wdsPIcw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Water On and Test for Leaks — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Once everything is assembled and tightened, go back to the water shut-off valves and turn them back on slowly. Return to the new spigot and check all soldered and threaded joints for any signs of leaks. Turn the spigot on to flush out the system (and the piece of bread) and confirm that it works correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q6a9wdsPIcw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7043-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sr0FJIIOFnw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Test — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Return to the main water shut-off valve and turn it counter-clockwise to slowly restore water to the house. You may hear pipes gurgling as they refill. Once the water is back on, go to the shower and turn the handle to test the newly installed cartridge. Check for proper hot and cold water flow and, most importantly, turn the faucet off and check for any leaks from around the handle or out of the tub spout. If there are no leaks and the faucet operates smoothly, the repair is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sr0FJIIOFnw</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7042-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7cpl_qs5heI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Plumb New Valve — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>With the old valve removed, position the new pressure-balance valve in the opening. Dry-fit new sections of copper pipe and fittings to connect the new valve to the existing hot supply, cold supply, shower head pipe, and the tub spout pipe. Ensure all pipes are cut to the correct length and the valve body is centered in the wall opening. Clean all copper pipe ends and fittings and apply flux in preparation for soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7cpl_qs5heI</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7042-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9-O2bfxka8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Setup — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Begin by understanding the scope of this advanced project. Gather all necessary tools and materials for the installation. The required tools include a Phillips screwdriver, adjustable pliers, an adjustable wrench, a tube cutter, a caulk gun, a tape measure, a thermometer, and safety glasses. You may also need to purchase supplies such as 1/2&apos; copper tubing, couplings, a torch, and a lead-free solder kit. Before starting, ensure the main water supply to the house is shut off. Locate the access panel behind the shower wall; if one does not exist, you will need to cut a 14&apos;x14&apos; opening to access the plumbing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9-O2bfxka8A</video:player_loc>
      <video:duration>139</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7042-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YksuwpRH0qA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Access — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>Begin by assessing the work area. The old valve has been removed, leaving an access hole in the tile wall with the hot and cold copper pipes exposed. Stuff rags into the wall cavity below the pipes to catch any debris and prevent tools or parts from falling down the wall. Ensure the main water to the house is shut off and the lines are drained. Remove any temporary caps, such as the SharkBite caps shown, from the ends of the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YksuwpRH0qA</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7039-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I31m6Iy7xXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Studs and Outline Access Hole — How to Convert a 3-Handle Shower Faucet to a Single-Handle Va</video:title>
      <video:description>Before cutting into the wall, locate the wooden studs to avoid cutting into them. Use a small, sharp tool like an awl or a small screwdriver to poke small holes in the drywall until you hit solid wood. Once the studs on either side of the pipe&apos;s estimated location are found, use a pencil and a straight edge to draw a rectangular outline (e.g., 16x16 inches) on the wall. This will be your guide for the access hole.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I31m6Iy7xXU</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7039-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8uaGFyF2EB8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Mark the Plumbing Center — How to Convert a 3-Handle Shower Faucet to a Single-Handle Val</video:title>
      <video:description>To find the location for the access panel, measure from a common reference point, such as a door jamb, to the center of the shower valve both horizontally and vertically. Transfer these two measurements to the wall on the opposite side of the shower, making a cross mark on the drywall that indicates the center of the plumbing valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8uaGFyF2EB8</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7039-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YbpbGwfQbyQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gain Access to Plumbing — How to Convert a 3-Handle Shower Faucet to a Single-Handle Valve</video:title>
      <video:description>To begin, you must gain access to the plumbing behind the shower wall. The correct way to remove the faucet is from behind. This may involve removing an existing access panel or cutting a new opening in the wall behind the faucet. Installing a pre-made access door can simplify future repairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YbpbGwfQbyQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7010-1</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SISuE9fbsNk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off the Water Supply — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Locate the water supply lines that connect to the top of your water heater. You should see a cold water inlet and a hot water outlet, each with a shut-off valve. Turn the handles on both valves to the &apos;OFF&apos; position. For ball valves like the ones shown, the handle will be perpendicular to the pipe when it is in the closed position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SISuE9fbsNk</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7010-2</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/17Klqwdg8pM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Power and Water — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Before beginning, it is crucial to ensure safety. Locate the circuit breaker for your electric water heater and switch it to the &apos;off&apos; position. Next, find the cold water supply line leading into the top of the water heater and turn the shut-off valve to stop the flow of water into the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/17Klqwdg8pM</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7010-3</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/thCbX8cgye4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn off water supply — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Turn off the water supply to the water heater. This valve is typically located above the water heater and has a handle that you turn to the left to close it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/thCbX8cgye4</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7006-1</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3VQCjGuNrLE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Refill Tank and Check for Leaks — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Slowly open the cold water supply valve only partially to allow the tank to start refilling. Go to a faucet in the house, preferably on the highest floor, and open the hot water tap. This will purge the air from the tank as it fills. Once water flows steadily from the faucet without sputtering, close the faucet. Return to the water heater and fully open the cold water supply valve. Carefully inspect the new T&amp;P valve and its connections for any leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3VQCjGuNrLE</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7006-2</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Iju_YKjNjvU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Low Water Pressure — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>After a new water heater installation, test the faucets in your home. If you notice significantly reduced water pressure, as shown in the sink, this is a strong indication that sediment has been dislodged in the pipes and has traveled to the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Iju_YKjNjvU</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7006-3</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DBkJeW2xMHc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose the Pressure Problem — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Identify the problem by observing the water pressure. If you have strong, consistent water pressure on the cold side of your faucet but the hot water pressure starts strong and then quickly drops to a trickle, the problem is likely a blockage in the hot water line, starting at the water heater.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DBkJeW2xMHc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7007-1</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pipZGJH_ifw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Heater Breaker — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Locate your home&apos;s main electrical panel and find the circuit breaker dedicated to the water heater. Switch the breaker to the &apos;OFF&apos; position to cut all power to the unit. This is a crucial safety step to prevent the heating elements from burning out when the tank is drained of water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pipZGJH_ifw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7007-2</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I_rSaRzmW3o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off the Heater — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Prepare the water heater for draining by turning it off. For a gas heater, locate the control knob and turn it to the &apos;Pilot&apos; setting. Do not turn it completely to &apos;Off&apos; to avoid having to relight the pilot light later. For an electric water heater, you must turn off the power at the circuit breaker panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I_rSaRzmW3o</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7007-3</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_wibngZTcWs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Power, and Partially Drain the Tank — How to Fix Low Water Pressure in Just the H</video:title>
      <video:description>Prepare the water heater for the installation. First, shut off the main water supply valve leading to the water heater. Next, turn off the energy source. For an electric water heater, locate its circuit breaker in your home&apos;s electrical panel and switch it to the &apos;off&apos; position. For a gas water heater, turn the gas control valve on the unit to the &apos;vacation&apos; or &apos;pilot&apos; setting. Finally, connect a garden hose to the drain valve at the bottom of the tank and partially drain the water to relieve all pressure inside the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_wibngZTcWs</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7011-1</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrYKP7NTS_A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill the tank with water — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Ensure the new drain valve is in the closed position. Close the temperature and pressure relief valve if you opened it. Go back to the cold water supply valve and turn it back on. Allow the water heater tank to fill completely with water. You will know the tank is full when water begins to flow steadily from the hot water faucet you previously opened. Once you see a steady stream, turn off the hot water faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrYKP7NTS_A</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7011-2</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kIL0D6unmAs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Refill and Restart Water Heater — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>With the new valve installed and closed, you can restore utilities. First, open the cold water intake valve to allow the tank to refill. Remember to close the hot water faucet you opened earlier. Once the tank is full, turn the gas supply back on. Finally, plug the power cord back into the outlet. Your water heater is now ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kIL0D6unmAs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7011-3</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bvTMUbXdKgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Refill and Check for Leaks — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Ensure the water heater&apos;s drain valve is fully closed and the garden hose is removed. Go back to the cold water inlet valve and slowly turn it back on. As the tank fills, carefully inspect both connections of the new supply line for any drips or leaks. Once the tank is full (you can verify by opening a hot water tap until water flows steadily), and you are sure there are no leaks, you can proceed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bvTMUbXdKgQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7008-1</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p15VXZkEFag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Partially Drain the Tank — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Attach a garden hose to the drain valve at the bottom of the water heater tank. Route the other end of the hose to a suitable floor drain or a large bucket. Use a flathead screwdriver to turn the drain valve&apos;s screw counter-clockwise to open it. To help the water drain, go to a sink inside the house and open a hot water faucet; this will break the vacuum in the lines. Allow about a quarter of the tank&apos;s water to drain out, then close the drain valve by turning the screw clockwise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p15VXZkEFag</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7008-2</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NRjdB3y1Iwk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Partially Drain the Water Heater — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Attach a garden hose to the drain valve at the bottom of the water heater. Route the other end of the hose to a floor drain or a bucket. Open a hot water faucet somewhere in the house to allow air into the tank, which helps the water drain. Use a flathead screwdriver to open the drain valve and drain approximately half of the water from the tank. This will lower the water level below the pressure relief valve. Once enough water is drained, close the drain valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NRjdB3y1Iwk</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7008-3</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d6JCr3UcsCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Heater — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Attach a garden hose to the drain valve at the bottom of the water heater. Place the other end of the hose in a floor drain or a location lower than the tank. To allow air into the tank so it can drain properly, open a hot water faucet somewhere in the house, such as a nearby utility sink. You can also lift the lever on the T&amp;P valve to help vent the tank. Open the drain valve, using a screwdriver if it has a slotted design, and let water drain out until the water level is below the T&amp;P valve. For a 40-gallon tank, this will be about 8-9 gallons. Once drained to the correct level, close the drain valve and remove the hose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d6JCr3UcsCw</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7005-1</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dVWeVK2EMMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Low Water Pressure — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>First, diagnose the low water pressure issue. Attach a pressure gauge to an outdoor hose bibb to measure the static pressure. Note this reading. Then, have someone turn on a fixture inside the house (like a tub or shower) and observe the pressure gauge. A significant drop in pressure while water is flowing (dynamic pressure) indicates a flow restriction problem, which is often caused by a failing pressure reducing valve (PRV).</video:description>
      <video:player_loc>https://www.youtube.com/embed/dVWeVK2EMMw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7005-2</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vgmduMzmdgg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Low Water Pressure — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>The video begins by demonstrating the problem: very low water pressure from the kitchen faucet. The presenter explains that for kitchen use, a stronger flow is needed to effectively wash away oil and debris. The first diagnostic step is to check the shutoff valves under the sink to ensure they are fully open, which they are in this case. This confirms the issue is not with the main supply valves but likely a blockage in the faucet system itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vgmduMzmdgg</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7005-3</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AGADT6YVHh8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose the Problem — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>First, identify the problem. Turn on the cold water in the shower and observe the water pressure. If the pressure is low, check other cold water taps in the house to determine if the issue is isolated to the shower or a more general plumbing problem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AGADT6YVHh8</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7009-1</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Lw9awU9xehE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush the Tank — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>With the long hose securely in place and directed outside, fully open the drain valve again. Allow the water to flow continuously. The incoming cold water from the main supply will enter the top of the tank and push the sediment-laden water at the bottom out through the hose. Let this run for an extended period, checking the clarity of the water periodically until it runs completely clear. In the video, this took about 15 minutes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Lw9awU9xehE</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7009-2</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mSid_O8GLq0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open Valve and Flush Tank — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Fully open the hose bib valve by turning its handle counter-clockwise. This will allow water to flow out of the tank under pressure, through the hose, and into your designated drain or container. Let the water run until you have flushed out approximately five gallons. This will help clear any accumulated rust or sediment from the bottom of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mSid_O8GLq0</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7009-3</loc>
    <lastmod>2026-10-07T14:16:47.615Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xLaPVWnx728/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Tank and Inject Air — How to Fix Low Water Pressure in Just the Hot Water Lines</video:title>
      <video:description>Open the yellow valve on the Sediment Buster to begin draining the water from the tank into your bucket. Observe the water clarity. Next, connect an air compressor hose with a pressure gauge to the air inlet on the Sediment Buster. Periodically close the yellow drain valve and inject short bursts of compressed air, around 40-50 PSI, into the tank. Immediately open the drain valve again. The bursts of air will agitate the sediment at the bottom of the tank, loosening it so it can be flushed out. You will notice the water becoming progressively murkier as the sediment is released.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xLaPVWnx728</video:player_loc>
      <video:duration>161</video:duration>
      <video:publication_date>2026-10-07T14:16:47.615Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7003-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XH50GtIWxT8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Repair Area — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>Begin by preparing the work area. Unpack the repair kit and place the included plastic bag on the floor beneath the pipe to catch any drips. Using a hammer and a chisel or a sturdy screwdriver, carefully chip away any loose or deteriorated concrete around the pipe penetration to create a small channel or void. This void should be large enough to accommodate the base of the injection ports. After creating the channel, use the supplied wire brush to vigorously clean the concrete surface and the pipe itself. Remove all loose debris, dirt, efflorescence, rust, and flaking paint to ensure a clean, sound surface for the epoxy to adhere to.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XH50GtIWxT8</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7003-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Uv5E3bo301Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Site Preparation and Excavation — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>The first step is to prepare the installation site. Locate the main water supply line, which is often underground near the exterior of the house. Carefully remove the pavers covering the area by first using a screwdriver and hammer to pry up the initial paver. Once the first one is out, the others can be lifted by hand. Stack them neatly to the side for re-installation later. Use a shovel to dig a trench, removing the sand and soil to fully expose the main water supply pipe. Dig a large enough area to comfortably work on the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Uv5E3bo301Y</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7003-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SICxY5KZUYQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Expose the Valve Cover — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>First, locate the sewer backflow valve, which is usually in the basement floor, often in a utility or furnace room. The access cover may be sealed with concrete. If so, carefully use a hammer and a chisel or old screwdriver to chip away the concrete around the perimeter of the cover to free it. Wear safety glasses to protect your eyes from flying concrete chips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SICxY5KZUYQ</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6999-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k-r_PPgh80E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Valve and Cleanout Installation — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>With the pipe exposed, carefully cut out a section of the existing cast iron pipe to fit the new backwater valve. Install the valve, making sure the flow arrow on the unit is pointing in the direction of the sewer main. Connect the new PVC valve to the old cast iron pipe using shielded mechanical couplings, which provide a flexible and durable seal. Install a new PVC wye fitting upstream of the valve and extend a pipe vertically to create a new, accessible cleanout. Use a level to check that the new pipe sections have the correct slope for proper drainage before finalizing the connections with PVC cement where applicable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k-r_PPgh80E</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6999-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TtHsE8rgwFI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Explaining the Plumbing Layout — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>Walk through the installed plumbing layout. Identify the main drain line, the branch for the downstairs toilet flange, the vent stack that will also serve the downstairs sink, and the main cleanout. Note that the pipes that will be encased in the concrete footing are wrapped in protective foam.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TtHsE8rgwFI</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6999-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F9c_KbaLfak/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Lower Drain, P-Trap, and Cleanout — How to Install a Backwater Valve to Prevent Sewer Backu</video:title>
      <video:description>The plumber begins assembling the new PVC drain line. Purple PVC primer is applied to both the outside of the pipe and the inside of the fitting, followed by clear PVC cement. A PVC P-trap is attached to the vertical pipe coming from the floor. This is followed by a PVC wye fitting, which is topped with a cleanout cap to allow for future access. A laser level projects a green line to guide the vertical and horizontal alignment. The assembly is extended with another section of pipe and a long sweep elbow to begin the horizontal run.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F9c_KbaLfak</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7002-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s9lycNHpvG4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Glue Cleanout Fittings — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>Before installing, assemble the double cleanout. This involves connecting a double wye fitting with two long sweep elbows and vertical riser pipes. To create a permanent, waterproof seal, apply purple PVC primer to the outside end of the pipe and the inside of the fitting socket. Immediately follow with a layer of PVC cement over the primer. Push the pipe firmly into the fitting with a slight twisting motion and hold for 15-30 seconds to allow the solvent weld to set. Repeat for all connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s9lycNHpvG4</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7002-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LR0IJQSGM_o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Glue and Install the PVC System — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>Once the dry-fit is complete, disassemble the pieces and begin the final installation. Apply PVC cement liberally to the outside of the pipe end and the inside of the fitting socket. Immediately push the pipe into the fitting, giving it a quarter-turn twist to ensure the cement is evenly distributed. Hold the joint firmly for about 30 seconds to allow the solvent weld to set. Follow your alignment marks to ensure each piece is correctly positioned. Continue this process for all joints, working methodically from one end of the drain line to the other.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LR0IJQSGM_o</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7002-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gi2RRlpOo38/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Glue New Pipe Section — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>After preparing the main valve assembly, take a separate section of flexible pipe and a PVC coupler. Apply PVC glue to the inside of the coupler and the outside of the flexible pipe section. Firmly push the pipe into the coupler, using a twisting motion to ensure a secure and leak-proof bond. This piece will be used to connect the new valve assembly to the existing plumbing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gi2RRlpOo38</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7000-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N1tyx0PWDWM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Shower Base in Concrete — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>The wet concrete is poured onto the floor in the shower area using a makeshift chute made from a piece of metal flashing. The concrete is spread out to cover the entire footprint of the shower base. The shower base is then carefully lowered into the wet concrete. The installer pushes it down to ensure it is fully bedded and uses a level to confirm it is perfectly flat and sloped correctly towards the drain. He taps on the base to check for hollow spots, confirming it is solidly supported everywhere.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N1tyx0PWDWM</video:player_loc>
      <video:duration>143</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7000-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1a0uR1-9Vfg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill Pipe Holes — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>To properly seal the old drain lines, first fill the inside of the pipes with expansion foam. After the foam has set, pack it down and fill the remainder of the hole with concrete. Trowel the concrete smooth so it is flush with the existing floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1a0uR1-9Vfg</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7000-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jHozdinCgd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pack Concrete Around Pipe — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>In a bucket, mix a bag of concrete with water until it reaches a thick, packable consistency. Using a trowel, pack the wet concrete into the gap between the PVC pipe and the block wall. Do this from both the inside and outside of the wall, ensuring the entire void is filled. Use a piece of wood or the trowel to smooth the concrete surface flush with the wall. Periodically check the level to ensure the pipe hasn&apos;t shifted during the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jHozdinCgd4</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7001-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rzTXjXHWwV0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Glue PVC Components — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>Once all PVC parts are cut to the correct lengths, prepare them for solvent welding. Use a deburring tool to remove any rough edges from the inside and outside of the pipe cuts. Lay the parts out on newspaper. Wearing gloves, apply a coat of purple PVC primer to the outside of the pipe end and the inside of the fitting it will connect to. The primer cleans and softens the PVC for a better weld. Then, apply a generous layer of PVC cement over the primed areas. Immediately join the pipe and fitting with a firm push and a quarter-turn twist. Hold the joint together for at least 30 seconds. Repeat for all joints to create the full replacement assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rzTXjXHWwV0</video:player_loc>
      <video:duration>209</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7001-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cGGoRb4kBX4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New PVC Pipe and Backwater Valve — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>Measure the opening and cut new PVC pipe sections to fit. Connect the new PVC pipe to the existing clay pipe using flexible rubber couplings secured with band clamps. Install the backwater valve in the line, ensuring the flow arrow points away from the house. Install a PVC Y-fitting to create a cleanout access point, extending it vertically to the floor level. Use PVC primer and cement to solvent-weld all PVC joints. Check the slope of the new pipe with a level to ensure proper drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cGGoRb4kBX4</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7001-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e9srIphtgNE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Dry-Fit New Pipes — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>Before applying any permanent adhesive, plan your new plumbing layout. Measure and cut the required lengths of PVC pipe. Use a saw for the cuts and then deburr the inside and outside edges of each cut with a knife or rag to ensure a smooth surface for a better seal. Assemble all the pipes and fittings without glue (dry-fitting) to check for proper alignment and length. This project aims for a more efficient layout with fewer sharp 90-degree turns, using two 45-degree elbows to create a smoother sweep, which improves water flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e9srIphtgNE</video:player_loc>
      <video:duration>291</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7004-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6pVMLMaHKrw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Check and Pressure Test — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>With all connections made and outlets capped, it&apos;s time for the final test. Slowly turn the main water supply back on. Carefully inspect every single connection point—the valve, the drop-ear elbows, and the new tie-ins to the main lines—for any signs of dripping or leaks. The narrator recommends leaving the system under pressure for at least 48 hours to ensure there are no slow leaks before sealing up the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6pVMLMaHKrw</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7004-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gd2Z_GCKaMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalizing with a Valve Box — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>After the installation is complete and the cement has had time to cure per the manufacturer&apos;s instructions, slowly turn the water back on and check for leaks. Once confirmed to be watertight, place a protective valve box over the entire assembly. Position the box so that it is level and provides clear access to the valve handle and the PRV adjustment screw. Place the lid securely on top of the valve box to finish the job before backfilling the trench with soil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gd2Z_GCKaMM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/7004-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SvyWnqoPJyU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pressure Test System — How to Install a Backwater Valve to Prevent Sewer Backups</video:title>
      <video:description>Before closing the wall, it is critical to test the new plumbing for leaks. Temporarily cap the shower riser port. Attach a pressure testing gauge, such as a SharkBite push-to-connect hose adapter with a gauge, to the end of the copper tub spout pipe. Turn on the water supply at the new shut-off valves and pressurize the system. Check all solder joints and crimp connections for any signs of leaks. Leave the system under pressure for a period of time (as required by local code) to ensure it is watertight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SvyWnqoPJyU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6996-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/scf5ovLI4Uk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Handle and Test — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Place the new handle onto the faucet stem, aligning the inner shape. Insert the new screw provided in the handle kit and use a screwdriver to tighten it securely. Once the handle is installed, turn the water on to test the repair. Check carefully for any drips or leaks around the packing nut and handle. If it&apos;s dry, the leak is fixed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/scf5ovLI4Uk</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6996-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sr0FJIIOFnw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Faucet — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Begin reassembling the faucet in the reverse order of disassembly. Place the chrome sleeve back over the new cartridge. Position the escutcheon plate against the wall, aligning the screw holes, and secure it with the two long screws. Tighten the screws evenly, but do not overtighten. Place the white plastic temperature adapter onto the cartridge stem, followed by the main handle. Secure the handle with the center screw using the Phillips screwdriver. Finally, snap the decorative cap back into place on the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sr0FJIIOFnw</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6996-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h7UDJlTmOy4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>After flushing the lines, reassemble the faucet. Place the clean or new cartridge back into the faucet body, ensuring it&apos;s properly aligned. Screw the brass retaining nut back on and tighten it snugly with the adjustable wrench, but do not overtighten. Screw the decorative cap back on. Place the handle back on the valve stem and tighten the set screw with the Allen key. Finally, go under the sink and turn the hot and cold water supply valves back on by turning them counter-clockwise. Test the faucet for proper flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h7UDJlTmOy4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6993-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SerCQCle_Ho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Begin by preparing for the repair. Turn off both the hot and cold water supply valves located under the sink. Lift the faucet handle to release any residual water pressure in the lines. To prevent losing small components, cover the sink drain with a piece of tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SerCQCle_Ho</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6993-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1Q0PmvTk7os/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the faucet — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Locate the shutoff valves under the sink. Turn the valves clockwise to shut off the water supply to the faucet. Turn on the faucet to drain any remaining water from the lines and relieve pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1Q0PmvTk7os</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6993-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NjrWSi4fnd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Before starting any work, it&apos;s crucial to stop the water flow. Go under the sink and locate the hot and cold water shut-off valves. Turn the handles of both valves clockwise until they are firmly closed. This prevents water from flowing to the faucet during removal and installation. After closing them, it&apos;s a good practice to open the old faucet handle to drain any remaining water and relieve pressure in the lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NjrWSi4fnd4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6994-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HPRBupDdZ8I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Cartridge — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Lightly coat the rubber O-rings on the new shower cartridge with plumber&apos;s silicone grease. This lubrication helps the cartridge slide into the valve body without tearing the O-rings and promotes a better seal. Carefully align the new cartridge with the guides and hot/cold inlets inside the valve body and press it firmly into place until it is fully seated. Secure the cartridge with its retaining clip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HPRBupDdZ8I</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6994-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0M7yUqpm_rU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Cartridge — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Remove and replace the cartridge. Gently pry out the old cartridge with a small flathead screwdriver. Clean any debris from behind the valve and clean the inlet lines to prevent damage to O-rings. Apply plumber&apos;s grease to the O-rings on the new cartridge. Carefully insert the new cartridge into the valve body, ensuring proper alignment and install it, keeping hot to the left and cold to the right. Ensure cartridge sits flush.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0M7yUqpm_rU</video:player_loc>
      <video:duration>117</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6994-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IWnO3Q3WDbM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Reinstall the Aerator — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Take your cleaned or new aerator parts and reassemble them. Start by placing the inner cartridge into the threaded housing. Then, place the rubber washer on top of the cartridge. Carefully align the threads and screw the entire assembly back onto the faucet spout, turning it clockwise. Tighten it by hand until it is snug. You can use a rag for a better grip to ensure it&apos;s securely sealed, but avoid over-tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IWnO3Q3WDbM</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6995-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/meRdEynmPVo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace the cartridge and ring — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Remove the old cartridge. Take the old ring and cartridge to a local plumbing supply store to find matching replacements. Install the new cartridge and ring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/meRdEynmPVo</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6995-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0sCKMEBYi_I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Obtain Replacement Parts — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>After identifying the faucet model, acquire the necessary parts. The video shows a Moen spout seal kit, part number 100000, which was found by searching online. This kit contains the new plastic gasket, the rubber O-ring, and a small packet of silicone grease needed for the repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0sCKMEBYi_I</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6995-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PwHEjAo7xPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Obtain Replacement Cartridge — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Identify the correct replacement cartridge for your faucet model. The video shows a Delta RP50587 &apos;DIAMOND Seal&apos; cartridge. It is best to take the old cartridge with you to the hardware store to ensure an exact match for both size and brand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PwHEjAo7xPw</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6997-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JbobHlxWabU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>First, carefully pry off the small decorative plug indicating hot and cold on the handle. This will reveal a set screw inside. Insert the correct size Allen wrench into the hole and turn it counter-clockwise several times to loosen the handle. You do not need to remove the screw completely. Lift the handle straight up and off the faucet body. Then, unscrew the large plastic cap underneath the handle by turning it counter-clockwise and remove it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JbobHlxWabU</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6997-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s8bpfAP9GYQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Use a small, pointed tool like a dental pick or a small flathead screwdriver to carefully pry off the decorative cap on the front of the faucet handle. This will expose the set screw. Insert an Allen wrench into the set screw and turn it counter-clockwise to loosen it. You do not need to remove the screw completely. Once loose, lift the handle straight up to remove it from the faucet body. Then, unscrew the chrome decorative dome cover by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s8bpfAP9GYQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6997-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PYKt2HqA3iY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle and Escutcheon Plate — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Begin by disassembling the faucet handle. Use a small, pointed tool like a dental pick or small hex key to carefully pry off the decorative cap on the front of the handle. Then, insert the correct size Allen wrench into the set screw located under the cap and turn it counter-clockwise to loosen it. Once loose, pull the handle straight off the valve stem. Next, use a Phillips head screwdriver to remove the two screws holding the large, circular escutcheon plate to the wall. Gently pull the plate off to expose the valve body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PYKt2HqA3iY</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6998-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9hjbTzcaXx0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle and Bonnet Nut — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Unscrew the faucet handle from the valve body by turning it counter-clockwise. Once the handle is removed, you will see the brass bonnet nut that secures the cartridge. Use slip-joint pliers or an adjustable wrench to loosen and unscrew this nut. A rag can be placed between the tool and the nut to prevent scratching the finish. Lift the nut off to expose the cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9hjbTzcaXx0</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6998-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bUKEPB50E6w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>Begin disassembling the faucet by first prying off the decorative faucet cap. Use a Phillips head screwdriver to remove the screw holding the faucet handle in place, and then pull the handle off. Next, pull the metal sleeve straight out. Use channel lock pliers to grip and unscrew the nut collar counter-clockwise. Once the collar is removed, reinstall the handle temporarily and pull it straight out to remove the entire cartridge assembly from the valve body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bUKEPB50E6w</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6998-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/efnxS3c77PA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extract the Faucet Cartridge — How to Stop a Dripping Two-Handle Bathroom Faucet</video:title>
      <video:description>With the handle removed, you will see a decorative cap or bonnet nut covering the cartridge. Unscrew this piece by turning it counter-clockwise. It can often be done by hand. Once the cap is off, grasp the stem of the cartridge and pull it straight up and out of the faucet body to remove it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/efnxS3c77PA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6987-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i6Fk3kDiFZ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Trim and Apply Sealant — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>After confirming the repair is successful and there are no leaks, reinstall the shower trim. Screw the black plaster guard back onto the valve body, followed by the chrome escutcheon plate. Reattach the handle adapter and the main handle. To complete the job, apply a neat bead of silicone sealant around the top and sides of the escutcheon plate where it meets the tile, creating a waterproof seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i6Fk3kDiFZ0</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6987-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bsq9LzIWGXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Seal the Bathtub — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Carefully lift and lower the bathtub into position, aligning the lubricated tailpiece with the floor drain. Guide the tailpiece straight down into the drain flange until the tub rests firmly and level on the floor. Once in place, fill the tub with a few inches of water to test for leaks. After confirming there are no leaks, apply a continuous bead of 100% silicone caulk around the entire base of the tub to create a watertight seal against the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bsq9LzIWGXU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6987-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oCtIh95BFjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Securing the Tub — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Once the plumbing is connected and the tub is set in its final position on the finished floor, apply a continuous bead of silicone caulk around the entire bottom edge of the tub where it meets the floor. This bead of sealant serves two purposes: it prevents water from getting under the tub, and more importantly, it securely adheres the tub to the floor. Once the silicone has fully cured, the tub will be very stable and will not move or rock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oCtIh95BFjU</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6989-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3muU-hTUL7o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Secure the New Tub — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Carefully place the new acrylic tub into the prepared alcove. Use a level across the top edges of the tub to confirm it is perfectly level. Once leveled, secure the tub to the wall studs. Pre-drill holes through the tub&apos;s flange at each stud location. Then, drive 2-inch exterior pan-head screws through the flange and into the studs. If there are gaps between the flange and the studs, insert shims to ensure the tub is supported without being warped when screwed in.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3muU-hTUL7o</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6989-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yiIcd_AHytU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure and Level the Bathtub — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Once the tub is set in the mortar, place a level across the top rim (deck) of the tub. Check for level from front-to-back and side-to-side. Make any necessary minor adjustments by pressing on the tub while the mortar is still wet. After confirming the tub is level, secure it in place by driving screws through the pre-drilled holes in the tub&apos;s mounting flange directly into the wall studs. This permanently fastens the tub to the house&apos;s framing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yiIcd_AHytU</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6989-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2HFv3Xp1bBU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Tub from Alcove — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Now, free the tub from the framing. The tub is likely resting on a ledger board and may be nailed or bracketed to the studs. Use a reciprocating saw to cut the ledger board and any accessible studs or framing pieces holding the tub in place. Cut any nails connecting the tub&apos;s flange to the studs. Once all supports are cut, pry and twist the tub to break it completely free. The tub shown was a fiberglass whirlpool model, which is lighter than cast iron but still awkward. Once loose, lift and pull the tub out of the alcove.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2HFv3Xp1bBU</video:player_loc>
      <video:duration>116</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6984-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FyWd0CYTb-Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Fixture and Valves — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>First, ensure the main water supply is turned off. Use a screwdriver to remove the screws holding the faucet handles and pull them off. Unscrew the old escutcheons. Remove the old tub spout. Then, use a large adjustable wrench or pipe wrench to unscrew and remove the old hot and cold valve stems from the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FyWd0CYTb-Q</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6984-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AtLMlUwVcdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Disassembly — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Begin by shutting off the main water supply. Then, remove all fixtures from the shower wall, including the grab bar, faucet handle, escutcheon plate, and shower curtain rod. This may require a drill or screwdriver. Carefully cut any existing sealant around the shower panel with a utility knife and pry the panel off the wall to expose the drywall behind it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AtLMlUwVcdE</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6984-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7cpl_qs5heI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Valve Body — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>First, remove the old tub spout by unscrewing it. If it&apos;s tight, use pliers with a rag to protect the finish. Then, move to the access panel behind the wall. Using a reciprocating saw, cut the top pipe that leads to the shower head. Use an adjustable wrench to loosen the union nuts on the hot and cold supply lines, allowing the old valve body to be completely removed from the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7cpl_qs5heI</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6992-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-ndRtFGGfoo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Drain Flange and Test for Leaks — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Return to the inside of the bathtub. For the best seal, apply a thin rope of plumber&apos;s putty to the underside of the drain flange rim. Carefully align the drain flange with the drain shoe below and begin threading it in clockwise by hand. Once it&apos;s snug, use your pliers or drain wrench to tighten it fully. Be careful not to overtighten and crack the tub or strip the threads. Clean away any excess plumber&apos;s putty that squeezes out. Reinstall the drain stopper. Finally, fill the tub with water again and drain it while checking underneath for any leaks to confirm the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-ndRtFGGfoo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6992-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cfyUuvQhT4U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Test for Leaks — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Once the tub is installed and the faucet is connected, conduct a final test. Fill the bathtub with several inches of water and then let it drain completely. While the water is draining, carefully check the drain connection point underneath the tub (if accessible) and around the base for any signs of leaks. Address any leaks immediately before considering the project complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cfyUuvQhT4U</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6992-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sg__SSyPdqk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cap and Test the System — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Before closing up the wall, it is essential to test the entire plumbing system for leaks. Use a test plug to cap the shower head&apos;s drop ear elbow. Use a push-to-connect cap, like a SharkBite cap, to temporarily seal the end of the tub spout pipe. With the valve&apos;s cartridge still in place, turn on the main water supply and check all connections (soldered, threaded, and crimped) for any signs of dripping or leaks. Once you confirm the system is watertight, you can proceed with installing the backer board.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sg__SSyPdqk</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6990-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yiIcd_AHytU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Bathtub — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>With the mortar bed in place, carefully lift the acrylic bathtub and maneuver it into the alcove. Tilt the tub to clear the threshold and then lower it straight down into the wet mortar. Press down firmly and evenly on the tub to embed it into the mortar bed. Push the tub back until its integral flange is tight against the wall studs on all three sides and resting on the ledger board.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yiIcd_AHytU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6990-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dz2UKy3Awiw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Flange Fasteners — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>After exposing the tub&apos;s mounting flange, use a drill or screwdriver to remove all the screws that fasten the flange to the wooden wall studs around the entire perimeter of the tub surround.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dz2UKy3Awiw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6990-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2HFv3Xp1bBU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Tub from Alcove — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Now, free the tub from the framing. The tub is likely resting on a ledger board and may be nailed or bracketed to the studs. Use a reciprocating saw to cut the ledger board and any accessible studs or framing pieces holding the tub in place. Cut any nails connecting the tub&apos;s flange to the studs. Once all supports are cut, pry and twist the tub to break it completely free. The tub shown was a fiberglass whirlpool model, which is lighter than cast iron but still awkward. Once loose, lift and pull the tub out of the alcove.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2HFv3Xp1bBU</video:player_loc>
      <video:duration>116</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6988-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8kYzeW-F5K4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Shower Base — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Begin by thoroughly cleaning the shower subfloor within the framed area. Use a broom to sweep away larger debris and follow up with a shop vacuum to remove all fine dust and particles. A clean, smooth surface is essential for preventing punctures to the liner.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8kYzeW-F5K4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6988-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5c3BVnteqAo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Subfloor — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>The project begins by showcasing the prepared shower alcove. The subfloor has been made perfectly level using a self-leveling compound. The surrounding walls are open to the studs, where wood blocking has been installed to support future grab bars. A new 2-inch drain pipe is centrally located but protrudes too high above the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5c3BVnteqAo</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6985-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iV5kQp8fWcQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Install Drainpipe — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Begin by applying purple PVC primer to the exterior of the PVC pipes and the interior of the fittings for each connection. Follow immediately with PVC cement. Connect the pieces in sequence: first, the standpipe to the washer box drain. Then, assemble the P-trap. Next, connect the P-trap to a sanitary tee. Finally, connect the sanitary tee to the main drain line extending through the floor, ensuring each joint is pushed together firmly and held for a moment to set.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iV5kQp8fWcQ</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6985-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nVYibL-wi2E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install P-Trap — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Install the P-trap. Dry fit the pieces first to get the correct height and alignment. Cut a vertical piece of pipe to connect the horizontal drain assembly down to the P-trap inlet. Ensure there is a minimum of two times the pipe diameter (e.g., 3 inches for 1.5-inch pipe) of straight pipe between the P-trap outlet and the TY fitting to prevent siphoning. Once measured, glue the P-trap into the TY fitting. Connect the union joint and tighten by hand, using channel-lock pliers for a final snug turn if needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nVYibL-wi2E</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6985-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R6GW-_k3Sr4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install P-Trap and Connect to Wall — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Assemble the P-trap and connect it to the bottom of the T-fitting. To connect the P-trap to the PVC drain stub-out in the wall, glue a threaded adapter onto the stub-out using PVC pipe cement. Apply the cement to both the outside of the pipe and the inside of the adapter, then push and twist them together for a strong bond. Once the adapter is set, connect the P-trap using the final slip nut and washer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R6GW-_k3Sr4</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6986-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1QeVLjrYuJ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust Leveling Feet — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Carefully place the freestanding bathtub on its side or upside down on the protected floor. Using a level, check the tub&apos;s frame for levelness. Locate the adjustable leveling feet integrated into the tub&apos;s support structure. Rotate each foot individually until the bubble on the level is perfectly centered, ensuring the tub is level from side-to-side and end-to-end. This is crucial for proper water drainage and stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1QeVLjrYuJ0</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6986-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IpmyKETgNZc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Installation Area — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Prepare the bathroom floor for the bathtub installation. Use a level to confirm the installation area is flat; the floor must have adequate structural support for the weight of the tub filled with water. Waterproofing the floor is highly recommended. Use a measuring tape to determine the exact location for the drain pipe on the floor, corresponding to the drain location on the tub. Finally, thoroughly clean the drain hole area, ensuring it is dry and completely free of any dirt or debris before setting the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IpmyKETgNZc</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6986-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bsq9LzIWGXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Seal the Bathtub — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Carefully lift and lower the bathtub into position, aligning the lubricated tailpiece with the floor drain. Guide the tailpiece straight down into the drain flange until the tub rests firmly and level on the floor. Once in place, fill the tub with a few inches of water to test for leaks. After confirming there are no leaks, apply a continuous bead of 100% silicone caulk around the entire base of the tub to create a watertight seal against the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bsq9LzIWGXU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6991-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7C0T8toyjGI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Overflow Assembly — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Prepare the overflow fitting by placing the beveled black rubber gasket over the overflow pipe against the back of the tub. From inside the tub, thread the clear plastic retaining nut onto the overflow pipe. Hand-tighten the nut to secure the overflow fitting against the tub wall, being careful not to overtighten and crack the plastic nut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7C0T8toyjGI</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6991-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5FEeUYoyY7w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Tighten Overflow Drain — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Insert a tub drain wrench into the overflow drain spud from inside the tub to hold it steady. From the back of the tub, place the overflow elbow against the tub wall and thread it onto the drain spud. Hand-tighten the elbow, causing it to draw the spud tight against the tub. Continue tightening until the assembly is snug and you see silicone ooze out evenly around the drain spud on the inside of the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5FEeUYoyY7w</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6991-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NiRZBKGg2ek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten Drain Assembly — How to Install a New Bathtub and Drain Assembly</video:title>
      <video:description>Insert the sealed drain shoe assembly from underneath the tub, pressing it against the drain opening. From inside the tub, screw the drain strainer into the drain shoe. Use a drain wrench, with a screwdriver inserted through it for leverage, to tighten the strainer firmly. This compresses the gasket and creates the seal. Return underneath and use channel-lock pliers to tighten the slip nut connecting the horizontal pipe to the overflow assembly. As a final precaution, apply sealant around the exterior seam where the drain shoe flange meets the bottom of the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NiRZBKGg2ek</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6982-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jzn5-hALuHk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks and Operation — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Plug the disposal&apos;s power cord into the under-sink outlet. Turn on the cold water at the faucet and let it run into the sink. Turn on the disposal switch and let it run for a minute. While it&apos;s running, thoroughly check all connections—the sink flange, the drain elbow, the dishwasher hose, and the P-trap connections—for any signs of dripping or leaks. Also, listen to ensure the motor sounds smooth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jzn5-hALuHk</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6982-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hqp_v4IAqOU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Plug the garbage disposal&apos;s power cord back into the outlet. To perform a thorough leak test, place a sink stopper in the drain and fill the sink basin with a good amount of water. Once filled, remove the stopper and let the water flow through the new splash guard and disposal. While the water is draining, look and feel carefully around the mounting ring and all reconnected pipes underneath the sink to ensure there are no drips or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hqp_v4IAqOU</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6982-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_jeKZo_okwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Test the Disposal — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Mount the reassembled disposal back under the sink. Lift it up and engage the tabs with the sink flange. Turn the mounting ring clockwise to lock it securely in place. Reconnect the main drain elbow and tighten its fittings. Reattach the dishwasher hose and secure its clamp. Once all plumbing is reconnected, plug the unit back into the electrical outlet. Restore power at the circuit breaker. Run water and briefly turn on the disposal to test for proper operation and check for any leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_jeKZo_okwE</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6983-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9MXIvur1HPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Loosen Drain Hose — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Go under the sink and locate the specific hose that connects the air gap fitting to the garbage disposal. This is typically a thick, flexible rubber hose. Using a nut driver or a flathead screwdriver, loosen the metal hose clamp on the end connected to the garbage disposal and the clamp on the end connected to the air gap. You don&apos;t need to remove the screws completely, just loosen them enough to slide the hose off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9MXIvur1HPM</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6983-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yCAnDosCZ1o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Drain Hose — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Access the area under your kitchen sink. Locate the flexible, corrugated drain hose coming from the dishwasher. Use a screwdriver or nut driver to loosen the metal hose clamp that secures the hose to the sink&apos;s drain pipe or garbage disposal nipple. Once loose, pull the hose off the connection point.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yCAnDosCZ1o</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6983-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/n8LkR6N98PU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Garbage Disposal — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Connect the drain line to the garbage disposal. First, use a screwdriver to ensure the knockout plug inside the disposal&apos;s dishwasher inlet is completely removed. Next, trim the 7/8&apos; hose to the appropriate length using a pipe cutter, making sure it will have a continuous downward slope from the air gap. Attach the hose to the disposal inlet and secure it with a stainless steel hose clamp, tightening it with a power drill.</video:description>
      <video:player_loc>https://www.youtube.com/embed/n8LkR6N98PU</video:player_loc>
      <video:duration>167</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6979-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XAos0Op0TK8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Faucet to Sink — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Begin by inserting the main faucet body, along with its attached hoses, through the pre-drilled hole on the sink or countertop. From underneath the sink, slide the rubber gasket up against the underside of the sink, followed by the metal washer, and finally the brass mounting ring. Screw the mounting ring onto the faucet&apos;s threaded pipe until it is hand-tight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XAos0Op0TK8</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6979-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/G6faQ5fX1Fs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Faucet to Sink — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Insert the main faucet body, along with its attached hoses, through the mounting hole on the sink or countertop. From underneath the sink, slide the upper isolating seat (rubber gasket), followed by the metal washer, onto the faucet&apos;s threaded shank. Secure everything in place by threading on the fixed nut and hand-tightening it firmly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/G6faQ5fX1Fs</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6979-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ill0xEmnyFQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Strainer from Underneath — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Working from underneath the sink, first slide the rubber gasket up over the threaded strainer body until it sits flush against the bottom surface of the sink. Follow this with the metal friction washer. Finally, take the pre-assembled mounting nut with its screws and thread it onto the strainer body. Hand-tighten it initially. Then, use a Phillips screwdriver to tighten the three screws evenly, alternating between them to ensure uniform pressure, until the entire assembly is snug and secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ill0xEmnyFQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6978-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wo-WKiC2yrQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Old Disposal — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Begin by ensuring the garbage disposal is unplugged from the wall outlet to cut all power. Place a bucket or towels underneath the plumbing to catch any residual water. Proceed to disconnect the dishwasher drain hose and the main drain pipe from the old disposal. This may require loosening clamps or unscrewing slip nuts. Once all plumbing is disconnected, support the weight of the disposal and twist the mounting ring counter-clockwise to release the unit from the sink flange. Carefully lower and remove the old disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wo-WKiC2yrQ</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6978-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WI_s2cPfzlg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Remove Dishwasher — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>With the drain hose and disposal confirmed to be clear, the issue is likely with the pump. To access it, you must remove the dishwasher. First, ensure the power is off at the circuit breaker and the water supply is turned off. Open the dishwasher door and locate the two mounting brackets at the top, securing it to the countertop. Unscrew these brackets. Then, remove the bottom kick plate cover by unscrewing the two screws holding it in place. Carefully slide the dishwasher forward and out of the cabinet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WI_s2cPfzlg</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6978-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ybkq-_ySjhk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall and Test — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>With all connections made, reinstall the dishwasher by carefully sliding it back into place under the counter and securing it with the screws. Reconnect the power to the dishwasher and garbage disposal. Turn the water supply back on. Place dry paper towels under all the new connections to easily spot any leaks. Run the dishwasher through a rinse or drain cycle to test the new drainage system. Check for any drips or leaks at the air gap, hose connections, and the P-trap assembly. If everything is dry, the installation is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ybkq-_ySjhk</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6980-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9MXIvur1HPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Loosen Drain Hose — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Go under the sink and locate the specific hose that connects the air gap fitting to the garbage disposal. This is typically a thick, flexible rubber hose. Using a nut driver or a flathead screwdriver, loosen the metal hose clamp on the end connected to the garbage disposal and the clamp on the end connected to the air gap. You don&apos;t need to remove the screws completely, just loosen them enough to slide the hose off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9MXIvur1HPM</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6980-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lmucX9Gijlk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Plumbing and Hoses — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Reconnect the plumbing to the new disposal. Insert the discharge tube, ensuring the rubber gasket is properly seated, and slide the metal flange into place. Secure it by tightening the two screws. Next, push the dishwasher drain hose onto its inlet port on the disposal. Slide the hose clamp into position and tighten it with a screwdriver to secure the hose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lmucX9Gijlk</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6980-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fg7C1z19AKc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect the Drain Hose — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Begin by locating the dishwasher drain hose where it connects to the side of the garbage disposal unit under the sink. Using a flathead screwdriver, turn the screw on the hose clamp counter-clockwise to loosen it. Once the clamp is loose, you can slide it back along the hose. Carefully but firmly wiggle and pull the end of the drain hose off the garbage disposal&apos;s inlet nozzle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fg7C1z19AKc</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6981-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PwlGaO_x6ik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install air gap — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Insert the air gap into the hole on the countertop and secure it in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PwlGaO_x6ik</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6981-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gS94HARbGC8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing the New Air Gap — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>From underneath the sink, feed the new air gap body up through the mounting hole. From the top, slide the rubber gasket over the air gap body and press it firmly against the sink surface. Go back under the sink and thread the large plastic nut onto the air gap body, tightening it by hand until it is snug. Do not overtighten. Finally, place the decorative cap over the top of the air gap, making sure the side opening is pointing towards the sink bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gS94HARbGC8</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6981-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ybkq-_ySjhk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Air Gap — How to Install a Dishwasher Air Gap on a Countertop</video:title>
      <video:description>Push the air gap body with the attached hoses up through the pre-drilled hole in the countertop from underneath the sink. From the top of the counter, place the chrome cover over the air gap body and press it down firmly to snap it into place. From underneath, use the provided plastic nut to tighten the air gap body against the countertop, securing it in place. You may not need tools for this, as hand-tightening is often sufficient.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ybkq-_ySjhk</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6971-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mjQfCbv-UDk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Filter Housing — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Choose a suitable location on the cabinet wall under the sink to mount the filter head. Ensure there is enough clearance below to easily change the filter cartridge in the future. Remove the top cap of the housing. Use a screwdriver to install the first mounting screw, hang the housing on it, and then install the second screw to secure it firmly to the wall. Replace the cap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mjQfCbv-UDk</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6971-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CzkTQbsL99k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Water Line — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Before starting, shut off the main water supply to the house. Locate the section of the main water line where the filter will be installed. Measure the space required for the filter unit and then use a pipe cutter to make clean, straight cuts and remove that section of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CzkTQbsL99k</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6971-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oR8ZvIcj2to/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Filter System — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Start by selecting a suitable location under the sink. Use the provided &apos;assistant label&apos; as a drilling template by pasting it onto the cabinet wall. A key tip is to mount the filter at least 2 inches higher than the bottom of the cabinet to allow for easy filter changes later. Using a variable speed drill with a cross screw head bit, drill pilot holes at the two indicated points on the template. Then, drive the provided screws into the holes, but do not drive them all the way in. Leave a small gap between the screw head and the wall. Finally, hang the filter system by aligning the keyhole slots on the back of the filter head with the screws and sliding it down into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oR8ZvIcj2to</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6973-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kOb6Yl4VH7U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Flush System — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Slowly turn the isolation valve back to the &apos;on&apos; position to restore water flow. As water fills the system, carefully inspect the connections at both ends of the new filter for any drips or leaks. Once you&apos;ve confirmed there are no leaks, go to the sink and turn on the filtered water tap. Let the water run for approximately five minutes. This will flush any loose carbon particles and air out of the new cartridge, preparing it for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kOb6Yl4VH7U</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6973-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/av1aymtvzUY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Filter — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Take the new filter and remove the red protective cap. Notice the lubricant on the two O-rings; do not wipe this off as it helps ensure a proper seal. Align the new filter with the housing, push it straight up, and then turn it counter-clockwise (to the right) a quarter turn until it locks securely in place. You will hear water rushing into the filter, confirming it&apos;s correctly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/av1aymtvzUY</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6973-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iFXVzgfLnZ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalize and Flush System — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Slowly turn the cold water shutoff valve back to the &apos;on&apos; position. Activate the filter&apos;s battery-powered life indicator by pulling out the small plastic strip from the battery compartment on top of the unit. Turn on the newly installed faucet and let the water run for a minimum of 10 minutes. This will flush any loose carbon particles from the new filters. While the water is running, carefully inspect all connections—the brass tee, the filter unit ports, and the faucet connection—for any signs of leaks. Once flushed and checked, the system is ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iFXVzgfLnZ0</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6974-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ayNNsR6m9fc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Test System — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Slowly turn on the cold water supply valve. With the water pressure on, carefully inspect all connection points for any drips or leaks. Feel around the connections at the water valve, the filter inlet, the filter outlet, and the faucet connection. Run the water at the faucet to flush the system and check the flow. Once confirmed that there are no leaks, place the top cover back onto the filter housing. Continue to monitor for leaks for the next 24 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ayNNsR6m9fc</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6974-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kOb6Yl4VH7U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Flush System — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Slowly turn the isolation valve back to the &apos;on&apos; position to restore water flow. As water fills the system, carefully inspect the connections at both ends of the new filter for any drips or leaks. Once you&apos;ve confirmed there are no leaks, go to the sink and turn on the filtered water tap. Let the water run for approximately five minutes. This will flush any loose carbon particles and air out of the new cartridge, preparing it for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kOb6Yl4VH7U</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6974-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8262L9LurJI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>System Flushing and Leak Check — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Once all connections are securely made, slowly turn the cold water shut-off valve back on. Go to the sink and turn on the faucet. Allow the water to run continuously for 5 minutes. This process flushes out any carbon fines from the new filter and rinses the new hoses and fittings. During this time, carefully inspect every connection point for any drips or signs of leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8262L9LurJI</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6975-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bjFKFZxRi2I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Pipes — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Using a tape measure, determine the correct length the copper pipes need to be for the new faucet fittings. Mark the cutting line on each pipe with a pencil. Attach a compact tubing cutter to the pipe at the mark, tighten it, and rotate it around the pipe, tightening it slightly with each rotation until the pipe is cleanly cut. Repeat for the second pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bjFKFZxRi2I</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6975-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CpgCqpKSQP4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Pipe End — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Examine the end of the pipe that was inserted into the fitting. The pipe end must be perfectly round, clean, and smooth. If the cut is jagged or angled, use the correct pipe cutter for the material (e.g., a copper tubing cutter for copper, a ratchet-style cutter for PEX) to make a fresh, square cut. Use a deburring tool to remove any sharp edges or burrs from both the inside and outside of the pipe end. If the pipe surface is deeply scratched, painted, or heavily sanded in the area where the O-ring seals, this can cause a leak. Cut the pipe back to a clean, undamaged section.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CpgCqpKSQP4</video:player_loc>
      <video:duration>158</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6975-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/foJlAlEdJi8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Water Line and Connect to Inlet — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Take your tube cutter or wire cutters and cut the plastic water line at a point that allows enough slack to connect to both ends of the filter. It is critical to make the cut as straight and perpendicular as possible. Take the end of the tubing coming from the water supply valve and push it firmly into the &apos;inlet&apos; side of the water filter. The filter should have a directional arrow indicating water flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/foJlAlEdJi8</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6977-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K5klL6gOrVY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install filtration system — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Bypass or shut off the main water line and open the nearest faucet to drain water from the pipes. Find a suitable location for the system, measure, and cut the inlet pipe. Mount the bracket of the filter on the wall and connect it to the pipeline. Turn on the main water and check there are no leaks and the system is working properly. Run the nearby faucet for about 10 minutes to flush out debris and loose filter media.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K5klL6gOrVY</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6977-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Uv5E3bo301Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plumbing the Filter System — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Now it&apos;s time to connect the prepared pipework to the mounted frame. Install the vertical and horizontal copper pipes, dry-fitting them into the inlet and outlet ports of the filter housing. Use a level on the horizontal pipe sections to ensure they are straight. Attach any remaining elbow fittings. Once all pipes are in position, use the power press tool to crimp all the press-fit connections, including the elbows connecting to the filter head. This creates the complete plumbing loop for the system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Uv5E3bo301Y</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6977-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bU9c_PtUTmQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>To prevent water from flowing while you work, shut off the water supply to the filter. If you have them, close the ball valve on the inlet pipe and the ball valve on the outlet pipe. Alternatively, the Culligan filter head has a built-in bypass. Turn the large blue handle from the &apos;FILTER&apos; position to the &apos;BYPASS&apos; position. This will stop water from entering the housing and divert it around the filter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bU9c_PtUTmQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6976-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wIOMkQChea8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Begin by locating the main water shut-off valve for your home, which is usually found near the water meter outside or in a basement/utility closet. Turn the valve clockwise to completely stop the flow of water. Once the water is off, go back to the faucet you are working on and open the handle to drain any remaining water left in the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wIOMkQChea8</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6976-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sr0FJIIOFnw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Main Water Supply — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Before starting the repair, locate the main water shut-off valve for the house. This is often found outside, in a basement, or a utility closet. Turn the valve handle clockwise until it is fully closed. To confirm the water supply is off, open a nearby faucet, such as the outdoor hose bib shown in the video, to drain any remaining water from the pipes and verify that the flow has completely stopped.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sr0FJIIOFnw</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6976-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mTSqkUBrU2s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Supply and Prepare Work Area — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Locate the main water shut-off valve for your house, often found behind an access panel. Turn the lever so it is perpendicular to the pipe to cut off the water flow. Go to a sink and open the faucet to drain any remaining water from the pipes. Before working in the tub, close the drain or cover it with a towel to prevent any small parts from being lost.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mTSqkUBrU2s</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6972-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AhXaHVgPoAo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Soldering the Final Connections — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>With the filter assembly mounted, the final plumbing connections can be made. Clean the ends of the copper pipes and fittings, apply flux, and fit them together. Use a propane torch to heat the joints until they are hot enough to melt solder. Apply the solder to the joint, allowing capillary action to draw it in and create a strong, watertight bond. Repeat this process for all remaining connections to fully integrate the filter into the water line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AhXaHVgPoAo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6972-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6BNH__J8fUg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Line to the Wall Valve — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Take one end of the braided steel water line and connect it to the water supply valve on the wall. First, thread the connector on by hand until it is snug. Then, use a box wrench to give it an additional half-turn (180 degrees) to fully tighten the connection and compress the rubber bushing for a proper seal. Do not over-tighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6BNH__J8fUg</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6972-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5nCqvRLudJo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Line to T-Fitting — How to Install a Whole-House Sediment Water Filter</video:title>
      <video:description>Take the new water line and connect it to the side of the T-fitting using the compression adapter. Hand-tighten the connection first. Then, use pliers or a vise-grip to secure one part of the fitting while using another pair of pliers to tighten the compression nut. Ensure the connection is very tight to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5nCqvRLudJo</video:player_loc>
      <video:duration>104</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6969-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ill0xEmnyFQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Drain Plumbing — How to Install a Pedestal Sink</video:title>
      <video:description>From underneath the sink, connect the rest of the drain plumbing. First, ensure the gasket is in place inside the slip nut for the drain tailpiece. Thread the tailpiece onto the bottom of the strainer body and tighten the slip nut using adjustable joint pliers. Next, ensure the P-trap washer is in place and connect the P-trap to both the tailpiece and the waste pipe in the wall. Tighten all slip nut connections with the adjustable joint pliers until they are snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ill0xEmnyFQ</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6969-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6of4S1K8EaM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Drain Plumbing (P-Trap) — How to Install a Pedestal Sink</video:title>
      <video:description>Assemble the P-trap components. Connect the P-trap to the sink&apos;s drain tailpiece, ensuring the slip nut and washer are correctly oriented. Then, connect the other end of the P-trap to the drain pipe stub-out in the wall, using the decorative escutcheon to cover the hole. Hand-tighten all slip nuts securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6of4S1K8EaM</video:player_loc>
      <video:duration>134</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6969-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a9AiyGy8_eU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the P-Trap — How to Install a Pedestal Sink</video:title>
      <video:description>Retrieve the P-trap components from the bucket. Re-attach the pieces in the reverse order of removal, ensuring the tapered ends of the gaskets face the correct direction for a proper seal. Hand-tighten the slip nuts to connect the P-trap back to the sink tailpiece and the wall pipe. Make sure the connections are snug to prevent leaks, but avoid overtightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a9AiyGy8_eU</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6967-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W5WxuVGWXqM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Install a Pedestal Sink</video:title>
      <video:description>Turn on the faucet and run a steady stream of water into both sink basins for a few minutes. While the water is running, carefully check all the pipe connections and joints underneath the sink for any drips or leaks. Use your hand to feel around each connection to ensure it is completely dry.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W5WxuVGWXqM</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6967-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jC_JpzCtIgw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Leak Test New Plumbing — How to Install a Pedestal Sink</video:title>
      <video:description>After the ABS cement has had a few minutes to set, test the new plumbing for leaks. Close the drain stoppers in both sink basins and fill them with water. This puts the entire system under pressure. Once full, pull the stoppers and let the water drain completely. While it drains, carefully check all new connections and joints underneath for any drips or leaks. Using a dry paper towel to wipe each connection can help reveal even the smallest leak.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jC_JpzCtIgw</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6967-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b0sUfU_hl_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Install a Pedestal Sink</video:title>
      <video:description>With all connections made, turn on the faucet to run water into both sink basins. Switch between stream and spray modes and use the pull-down hose to direct water all around the strainer flanges. While water is flowing, carefully inspect all the new joints and connections underneath the sink. Look and feel for any drips or moisture to confirm the installation is completely leak-free.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b0sUfU_hl_E</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6968-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/McC6a4L1htg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-drill Holes and Start Bolts — How to Install a Pedestal Sink</video:title>
      <video:description>Remove the sink and pedestal. Using a power drill, pre-drill pilot holes at the locations you marked on the wall. The video indicates drilling into solid blocking behind the drywall for a secure mount. After drilling, start threading the lag bolts with washers into the pilot holes, leaving them sticking out enough to hang the sink on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/McC6a4L1htg</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6968-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/npWKxgeM8_c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Build Interior Support Frame — How to Install a Pedestal Sink</video:title>
      <video:description>Construct a support frame inside the base cabinet to hold the weight of the sink. Measure and cut 2x4 lumber to create horizontal supports (cleats) and vertical supports. Attach the cleats to the inside walls of the cabinet using a power drill and screws. Use a level to ensure the tops of the supports are perfectly level and at the correct height to position the sink rim just below the top of the cabinet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/npWKxgeM8_c</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6968-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g5oHbmK5y8U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Drill for Optional Lag Bolts — How to Install a Pedestal Sink</video:title>
      <video:description>Carefully place the sink onto the mounted brackets to test the fit. From underneath, use a pencil to mark the location of the optional mounting holes that go through the back of the sink. These are for additional support. Lift the sink off the brackets. Use a drill to create holes at the marked locations. Screw the provided lag bolts into these holes until they are snug against the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g5oHbmK5y8U</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6966-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NS2OL9oyu9Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Locknut — How to Install a Pedestal Sink</video:title>
      <video:description>To fully secure the assembly, insert a sink basket wrench into the drain from above to hold it stationary. From below, use a large pair of adjustable pliers or a specialized sink drain wrench to grip the tabs on the locknut. Turn the wrench clockwise to tighten the nut firmly, compressing the rubber washer and plumber&apos;s putty to create a final, secure, and watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NS2OL9oyu9Y</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6966-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-2LrWTj9Oh0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Assembly — How to Install a Pedestal Sink</video:title>
      <video:description>Install the drain assembly, which is applicable to both top-mount and undermount sinks. From inside the basin, insert the strainer ring and strainer bowl into the drain opening. From underneath the sink, place the rubber washer over the strainer threads, followed by the locknut. Hand-tighten the locknut, then use a wrench to fully secure it. Finally, attach the plastic joint and the connecting nut which will connect to the P-trap assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-2LrWTj9Oh0</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6966-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NjrWSi4fnd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Secure New Faucet — How to Install a Pedestal Sink</video:title>
      <video:description>Prepare the new faucet for installation. Place the clear plastic gasket over the faucet&apos;s hoses and seat it firmly against the base. Carefully feed the hot and cold water lines and the threaded mounting shank through the hole in the countertop. Position the faucet so it is centered and facing the correct direction. From underneath, slide the large washer and then the mounting nut over the hoses and onto the threaded shank. Hand-tighten the nut to hold the faucet in place, then use the included tool or a basin wrench to fully tighten it, securing the faucet to the sink deck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NjrWSi4fnd4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6970-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJ6BM9Ac2sQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Pedestal and Final Tightening — How to Install a Pedestal Sink</video:title>
      <video:description>With all the plumbing connected, carefully slide the pedestal into position directly under the sink basin, ensuring it is centered and supports the weight of the basin. Once the pedestal is in place, use an adjustable wrench to perform the final tightening of the nuts on the expansion bolts, permanently securing the sink basin to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJ6BM9Ac2sQ</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6970-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hp5xMamrtwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Sink Basin to Wall — How to Install a Pedestal Sink</video:title>
      <video:description>After marking the locations, move the sink and pedestal out of the way. If mounting into wood studs, drill pilot holes at the marked locations. Install the lag screws, leaving them protruding from the wall enough to hang the sink. Carefully lift the sink basin and hang it on the lag screws. Check again with a level to ensure it&apos;s straight. Finally, use a socket wrench to tighten the lag screws securely, being careful not to overtighten and crack the porcelain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hp5xMamrtwQ</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6970-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SH15SyPoIJ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Pedestal in Place — How to Install a Pedestal Sink</video:title>
      <video:description>Before placing the pedestal, quickly wipe the underside of the sink bowl with a paper towel to ensure it&apos;s clean. Carefully slide the pedestal with the fresh silicone back under the sink, aligning it with its final position. Press it firmly upwards so that the sink rests on the pedestal and the silicone makes full contact, creating a solid seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SH15SyPoIJ8</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6965-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJ6BM9Ac2sQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Mounting Holes — How to Install a Pedestal Sink</video:title>
      <video:description>Place the pedestal in its final position on the floor. Carefully set the sink basin on top of the pedestal and push it flush against the tiled wall. Using a pencil or marker, reach underneath the basin and mark the wall through the two mounting holes on the back of the sink. These marks will be the locations for drilling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJ6BM9Ac2sQ</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6965-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tPXySaJnpqo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount and Secure Sink to Wall — How to Install a Pedestal Sink</video:title>
      <video:description>Lift the assembled sink and carefully hang it onto the wall-mounted bracket. Ensure it is securely seated. To prevent the sink from tipping forward, you must also secure the bottom. Press the sink firmly against the wall and mark a location for a screw through one of the integrated tabs at the bottom of the sink legs. Use a center punch and masonry bit to drill a hole and insert an anchor, just as you did for the main bracket. Drive a screw through the tab and into the anchor to secure the bottom of the sink to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tPXySaJnpqo</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6965-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CqptlBMLlJ4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount and Secure the Sink — How to Install a Pedestal Sink</video:title>
      <video:description>With assistance, carefully lift the sink and place it onto the installed wall brackets. Align the mounting holes on the underside of the sink with the corresponding holes in the brackets. Insert the provided bolts from underneath and use an Allen wrench to tighten them, making the bottom of the sink firm and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CqptlBMLlJ4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6964-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PaMasBhANcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Old Faucet — How to Install a Pedestal Sink</video:title>
      <video:description>Begin by locating the hot and cold water shut-off valves under the sink. Use a flathead screwdriver to turn the valve slots perpendicular to the pipe, shutting off the water flow. Next, position a basin wrench or faucet tool onto the mounting nuts securing the old faucet from below and turn to loosen them. Once loose, use pliers to loosen the supply line nuts from the shut-off valves. Finish unscrewing all connections by hand. With everything disconnected, go to the top of the sink and lift the entire old faucet assembly out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PaMasBhANcM</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6964-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E77WSJsxQO0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Remove Old Faucet — How to Install a Pedestal Sink</video:title>
      <video:description>Before starting, locate the hot and cold water shut-off valves under the sink and turn them clockwise to shut off the water supply. Disconnect the old water lines and remove the old faucet assembly from the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E77WSJsxQO0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6964-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NjrWSi4fnd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet — How to Install a Pedestal Sink</video:title>
      <video:description>With the water off, proceed to remove the old faucet. From underneath the sink, use a basin wrench or the specific tool provided with the old faucet to loosen and unscrew the large mounting nut holding the faucet in place. You may also need to disconnect the hot and cold water supply lines from the shut-off valves if they are not being replaced. Once all mounting hardware and hoses are disconnected, go to the top of the sink and carefully lift the entire old faucet assembly up and out of the mounting hole.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NjrWSi4fnd4</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6949-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UVKenNYuI7A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Strainers and Drain — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>He removes the old strainer baskets from the old sink because he plans to reuse them. Then he applies plumber&apos;s putty to the underside of the drain flange to seal it. He places the strainer basket over the drain hole and secures it in place by hand tightening the lock nut. Next he uses pliers to tighten the nut further. He repeats the same steps for the other drain. After that, he connects the drain pipes using a slip-joint tee and p-trap assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UVKenNYuI7A</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6949-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AENtPRANkZA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Old Drain Pipe — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Begin by disconnecting the drain pipes from the old basket strainer. Unscrew the slip nut connecting the tailpiece to the bottom of the strainer. If it&apos;s stuck, use a pair of channel-lock pliers to loosen it. The P-trap should already be disconnected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AENtPRANkZA</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6949-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mz010mNOCoQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten New Drain Assembly — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>With the area prepared, install the new drain assembly. First, wrap the threads of the new drain assembly with thread seal tape in a clockwise direction. Then, carefully screw the new assembly into the drain pipe, ensuring it engages the threads properly. Hand-tighten it as much as possible. To fully secure it, insert a pair of pliers into the crossbars of the new strainer and turn clockwise to tighten it down. Ensure it is snug, but be careful not to overtighten and crack the drain pipe. As you tighten, excess plumber&apos;s putty will squeeze out from under the flange; wipe this away with a paper towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mz010mNOCoQ</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6948-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_a2LP_Fymeg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Drain Assembly — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Place the drain strainer into the opening. Insert the metal tightening tool into the slots on the strainer. Use a flathead screwdriver as a lever in the center of the tightening tool and turn it clockwise. This action tightens the entire drain assembly, compressing the gaskets and creating the final, secure seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_a2LP_Fymeg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6948-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eYGM9YszA7o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Main Drain — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Insert a drain wrench or a specialized drain tightening tool into the crossbars of the strainer body inside the tub. Use an adjustable wrench to grip the drain tool and turn it clockwise to tighten the strainer body securely into the drain elbow. Ensure it is tightened enough to compress the gasket and putty, creating a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eYGM9YszA7o</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6948-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iPTvUxNJXp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten the Drain Strainer — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Insert the main drain strainer body, which is also the no-caulk drain tool. Use a pair of smooth-jaw pliers, like Knipex pliers, to grip the tabs on the strainer. Turn the strainer clockwise to thread it into the brass ring. Tighten it firmly to fully compress the rubber gasket and create the final watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iPTvUxNJXp0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6945-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vsaCoe3dgKM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Drain Assembly — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>From underneath the sink, install the bottom part of the drain assembly, including any gaskets or nuts. As you tighten the bottom nut, it will pull the top strainer down, compressing the plumber&apos;s putty and creating a firm, watertight seal. Hold the top strainer in place to prevent it from spinning while you tighten from below. You will see more putty squeeze out as it tightens.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vsaCoe3dgKM</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6945-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RDKZq3u3Ul4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach the Bottom Housing — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>From underneath the sink, take the bottom housing and the black rubber gasket. Place the black rubber gasket onto the top of the housing, ensuring the ribbed side faces up towards the bottom of the sink. Slide the housing up onto the threaded portion of the strainer body that is protruding through the sink&apos;s drain hole.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RDKZq3u3Ul4</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6945-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NAABLpTzozo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Basket Under the Sink — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>From underneath the sink, take the basket component. Have a helper hold the top strainer steady or apply pressure to it. Insert the central mounting bolt down through the strainer from the top. Align the basket with the bolt from underneath and begin to hand-tighten the basket onto the bolt. The basket has a large rubber gasket that will press against the underside of the sink to create a seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NAABLpTzozo</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6942-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mYvzpxcwHLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Sink Strainers — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Take a small amount of plumber&apos;s putty and roll it into a rope shape. Apply the putty rope to the underside of the new strainer&apos;s flange. Press the strainer firmly into the sink hole from the top. From underneath, install the rubber gasket, fiber washer, and the large metal locknut. Use a sink installer tool to hold the strainer from the inside while you tighten the locknut from below with pliers to ensure it&apos;s secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mYvzpxcwHLc</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6942-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ijfDdxCESf0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Sink Flange — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Apply plumber&apos;s putty or sealant to the underside of the sink flange. Press the flange firmly into the sink drain opening. Remove any excess sealant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ijfDdxCESf0</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6942-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9k0MjvZSPSk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Putty and Discard Gasket — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Take the rolled plumber&apos;s putty and press it firmly around the entire circumference of the underside of the sink strainer&apos;s flange. The video explicitly advises discarding the black rubber gasket that often comes with strainer kits, as using plumber&apos;s putty provides a superior, more durable seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9k0MjvZSPSk</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6943-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3xONh3qfDD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up and Reconnect P-Trap — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Once the drain flange is securely tightened, use your finger or a putty knife to wipe away all the excess plumber&apos;s putty that has squeezed out around the flange inside the tub. Finally, go underneath the tub and reconnect the P-trap assembly by threading its slip nut onto the bottom of the new drain flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3xONh3qfDD4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6943-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/n89v6hlhuEw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Strainer — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Tighten the lock nut from underneath the sink to secure the strainer basket. Apply thread locker to prevent leaks. \nRemove excess plumber&apos;s putty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/n89v6hlhuEw</video:player_loc>
      <video:duration>117</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6943-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LG9WhHTZyCE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Mounting Nuts and Seal — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Using an adjustable wrench, tighten the mounting nuts on the back of the tub. As you tighten, the plumber&apos;s putty will compress and squeeze out, forming a complete seal. Alternate between tightening each nut to ensure even pressure. Once tight, wipe away the excess putty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LG9WhHTZyCE</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6947-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NVFnaygxCpA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Surfaces — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Thoroughly clean the old, crumbled plumber&apos;s putty from the sink flange and the sink drain opening. Scrape away all residue to ensure a clean surface for the new putty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NVFnaygxCpA</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6947-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/686O3THErJc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Sink and Install New Flange — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>First, thoroughly clean the area around the sink drain to remove any old plumber&apos;s putty and grime. Use a rag for this. Next, take a new piece of plumber&apos;s putty, roll it into a rope, and form a ring around the underside of the new sink flange. Press the new flange firmly into the sink drain, ensuring the putty creates a complete seal. Scrape away any excess putty that squeezes out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/686O3THErJc</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6947-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X6Ebv51Z9Xw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Parts and Clean Surfaces — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>From above the sink, pull the old drain assembly out. Inspect the components, noting the condition of the gaskets and seals, which is likely the cause of the leak. Thoroughly clean the drain opening in the sink basin, removing all old plumber&apos;s putty or sealant residue with a paper towel or rag to ensure a clean surface for the new seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X6Ebv51Z9Xw</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6944-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/916MXTClmNw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Drain and Check for Leaks — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Once everything is reassembled, test the stopper to ensure it operates correctly. Then, turn on the faucet and let water run to confirm that the drain is clear and flowing quickly. While the water is running, perform a final check under the sink to ensure there are no leaks from the connections you worked on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/916MXTClmNw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6944-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MBYTWxBuYSg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Begin reassembly by dropping the clean pop-up stopper back into the sink drain. From underneath, re-insert the pivot rod, making sure it goes through the loop on the bottom of the stopper. Hand-tighten the retaining nut. Reconnect the lift rod to the pivot rod with the clip. Re-install the P-trap, ensuring the gaskets are in place and hand-tightening both slip nuts. Remove the paper towel from the wall pipe. Finally, turn on the faucet and run water to test that the drain is flowing freely and to check for any leaks at the connections you just tightened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MBYTWxBuYSg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6944-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y3v3Sc_ZB1Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>After reassembly, test the mechanism by operating the lift rod at the back of the faucet. Ensure the stopper moves up and down smoothly. To check the seal, pull the lift rod up to close the stopper. Turn on the faucet and fill the sink basin with a few inches of water. Turn the water off and observe if the water level remains stable. If the sink now holds water, the repair is successful. Finally, push the lift rod down to open the drain and ensure the water drains out correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y3v3Sc_ZB1Y</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6946-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iJ9nbu4aKRM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Apply New Plumber&apos;s Putty — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Take a generous amount of fresh plumber&apos;s putty from the container. Roll it between your hands or on a clean surface to form a long, uniform rope or &apos;snake&apos; that is slightly thicker than a pencil. The rope should be long enough to encircle the entire drain opening. Carefully lay the putty rope around the sink drain opening, pressing it lightly into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iJ9nbu4aKRM</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6946-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MFyKUrPDecc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Plumber&apos;s Putty — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Begin by taking a generous amount of plumber&apos;s putty from its container. Knead the putty in your hands to warm it up and make it more pliable. Once softened, roll it out on a flat surface into a long, thin rope, similar to a snake. This rope of putty will be used to create a watertight seal under the new drain flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MFyKUrPDecc</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6946-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jzn5-hALuHk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Plumber&apos;s Putty to Flange — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Take a piece of plumber&apos;s putty and knead it in your hands to soften it. Roll it into a long, thin rope, approximately 1/2 inch in diameter. Apply this putty rope evenly around the underside of the lip of the new metal sink flange. This will create the primary seal against the sink basin.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jzn5-hALuHk</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6941-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GfZgVIAdlVg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Drain Assembly — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Begin by disassembling the old drain assembly. From the top of the sink, use a large adjustable wrench or spud wrench to unscrew the drain flange. You may need to hold the locknut on the underside of the sink to prevent the entire assembly from spinning. A bucket should be placed underneath to catch water. The connected PVC drain pipe is also cut using a saw to allow for complete removal of the old drain body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GfZgVIAdlVg</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6941-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s5loz2XrMag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect P-Trap — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>To fully remove the sink, the drain plumbing must be disassembled. Place a bucket underneath the U-shaped pipe, known as the P-trap, to catch water. Use channel-lock pliers to loosen the two large slip nuts: one connecting the trap to the vertical tailpiece from the sink, and the other connecting it to the waste pipe arm in the wall. Once loose, unscrew them by hand and remove the P-trap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s5loz2XrMag</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6941-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_bLlylLXWX0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Drain and Clean Surface — How to Install a Kitchen Sink Basket Strainer</video:title>
      <video:description>Place a container underneath the sink&apos;s P-trap. Use channel-lock pliers to loosen the slip nuts connecting the drain tailpiece to the sink and the P-trap. Remove the old drain assembly. Clean the sink and countertop surface, using a putty knife and paper towels to remove any old sealant or grime.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_bLlylLXWX0</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6930-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/96jH-FGFwMQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Out the Damaged Pipe Section — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Apply cutting oil to the wheel of a pipe cutter to preserve the blade and ensure a smooth cut. Position the pipe cutter on one side of the leak and rotate it, tightening it gradually until the pipe is cut through. Repeat on the other side of the damaged section to remove it completely. Be prepared to catch a large stream of water after the first cut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/96jH-FGFwMQ</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6930-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jW9O5GwlTco/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Make the Cut — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>With the cutter in position, activate the drill. Apply steady but gentle pressure to allow the blade to cut through the pipe wall. Once the blade has fully penetrated the wall, begin to move the drill in a circular, clockwise motion around the inside perimeter of the pipe. As you do this, maintain a slight outward pressure to keep the guide against the inner pipe wall. Let the tool do the cutting work. Continue this circular motion until the section of pipe is completely severed and falls away.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jW9O5GwlTco</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6930-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sr0U6anBQaQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Pipe — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Wearing safety gloves and glasses, insert the assembled pipe cutter into the PVC pipe. Bring the drill up to speed and gently press sideways against the inner wall of the pipe. Rotate the drill around the inside of the pipe, allowing the blade to cut through the material. The depth guide will rest against the end of the pipe, preventing the tool from going further and ensuring a flush cut at the set depth. Continue until the section of pipe is completely severed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sr0U6anBQaQ</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6931-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/edVjZwfNQyc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Cast Iron Pipe — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Using a reciprocating saw with a metal-cutting blade, carefully cut through the cast iron pipe at your marked locations. Keep the saw steady and let the tool do the work. Be prepared for the process to take several minutes per cut. As you get close to cutting through the bottom of the pipe, expect water and debris to splash out. You can use a plastic bag to shield your face from the worst of the spray. Cut completely through the pipe on both ends of the section you intend to remove.</video:description>
      <video:player_loc>https://www.youtube.com/embed/edVjZwfNQyc</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6931-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PXytjeQjNfs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Out Damaged Pipe Section — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>First, protect the lower drain by plugging the openings with rags and plastic to catch debris. Using a reciprocating saw equipped with a specialty blade for cutting cast iron, make a straight cut through the upper section of the pipe, above the damaged area. Then, cut through the lower section of the main 4-inch stack and the connected 2-inch vent pipe to completely remove the broken piece. To ensure a straight cut on the lower section, a piece of wood can be braced across the opening to serve as a guide for the saw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PXytjeQjNfs</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6931-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vB_nhtUe4OU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Pipes to the Block — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>With the support block in place, use copper pipe clips to secure the pipes. Place a clip around each of the three pipes (hot, cold, and shower riser) and fasten them to the wooden block using screws and a drill. This will firmly anchor the entire valve assembly, preventing any movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vB_nhtUe4OU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6924-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MvODYQjkk7g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Remove Old Cast Iron Pipe — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>The plumber begins the demolition by using a reciprocating saw to cut the PVC pipe that connects the bathroom lavatory to the old drain. To protect the nearby gas line from sparks, he covers it with a wet towel. He then uses an angle grinder with a metal cutting wheel to carefully cut through the heavy cast iron stack, making one cut above and one cut below the faulty sanitary tee. Once the section is free, he carefully wiggles and pries the heavy cast iron piece out of the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MvODYQjkk7g</video:player_loc>
      <video:duration>131</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6924-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AZF_r-HxHDs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Copper Pipe — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Before any work begins on the pipe, shut off the main water supply to the house. Open faucets elsewhere to drain the water from the lines. Place a pan under the work area to catch any residual water. For this new construction, the pipe is cleaned with sandpaper. Then, a pipe cutter is used to trim the pipe to the desired length, about 2-3 inches from the wall. Clamp the cutter, rotate it around the pipe, and tighten the knob with each revolution until the end of the pipe breaks off. Allow the remaining water to drain completely. A decorative shallow flange can be slid over the pipe to cover the hole in the wall. Finally, the end of the pipe is thoroughly cleaned again with sandpaper to ensure a good surface for soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AZF_r-HxHDs</video:player_loc>
      <video:duration>97</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6924-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eCEOj5R0Rhs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Shut Off Water — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Begin by preparing the work area. Place a bucket and a rag under the P-trap to catch any water spills. Locate the hot and cold water shut-off valves under the sink and turn them clockwise to shut off the water supply completely. Turn on the faucet to drain any remaining water and relieve pressure in the lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eCEOj5R0Rhs</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6925-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NiRZBKGg2ek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Deburr New Pipe — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Take the marked brass pipe to a safe workspace, such as a driveway. Using the angle grinder equipped with a metal cut-off wheel, carefully cut the pipe along the marked line. After the cut is complete, use a piece of sandpaper to deburr and smooth the sharp edge of the pipe. This ensures it will slide easily into the fittings and not damage any rubber gaskets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NiRZBKGg2ek</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6925-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ItK5KEBaX3I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deburr and Chamfer Cut Ends — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>After cutting, the pipe ends will be rough. Use an angle grinder with a flap disc or a similar abrasive tool to smooth the outside edge of the cut, creating a slight bevel or chamfer. Then, use a sharp utility knife to carefully trim away any plastic burrs from the inside lip of the pipe. The goal is to create a smooth, clean end that will not tear or damage the rubber seals upon insertion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ItK5KEBaX3I</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6925-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/edVjZwfNQyc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Pipe Removal — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Begin by preparing the work area and the existing cast iron pipe for removal. Lay down plastic sheeting on the floor directly below the pipe to catch any spills or debris. Use a wire brush to thoroughly clean the sections of the cast iron pipe where the new couplings will be attached. This removes rust and grime, ensuring a better seal. After cleaning, use a hand saw to score a groove around the pipe at your intended cut marks. This groove will guide the reciprocating saw blade and prevent it from slipping when you start the cut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/edVjZwfNQyc</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6928-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OKd2ldZP2Gs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure and Tighten Couplings — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Slide the flexible couplings from the cast iron pipe over the joints so that each coupling bridges the connection between the cast iron and the new PVC pipe. Ensure the couplings are evenly positioned over both pipes. Using a drill or a socket driver, tighten the metal band clamps on both sides of each coupling. Tighten them firmly to create a secure, watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OKd2ldZP2Gs</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6928-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZJaLQYOaxpM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Transition Clamps — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Visually inspect all mechanical couplings (clamps) used to join the pipe sections. Ensure the correct type of clamp is used for each connection. For transitions between dissimilar materials like PVC and cast iron, a shielded transition coupling is required. These clamps consist of a rubber gasket and a metal shield with bands that are tightened to create a secure, durable seal. The installation in the video uses the correct clamps for both the PVC-to-cast iron and cast iron-to-cast iron connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZJaLQYOaxpM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6928-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MvODYQjkk7g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Pipe Ends and Install Couplings — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>After removing the old pipe, the plumber prepares the remaining cast iron stack for the new fittings. He uses a strip of emery cloth to sand and clean the cut ends of the cast iron, removing any rust and burrs to ensure a smooth surface for a proper seal. He then slides two 3-inch Fernco flexible couplings onto the cast iron pipes, one on the top section and one on the bottom, pushing them out of the way to allow for the installation of the new PVC section.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MvODYQjkk7g</video:player_loc>
      <video:duration>118</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6929-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/edGcVMI5ULc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut PVC Pipe — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Test fit the new check valve to see how much of the existing PVC pipe needs to be removed to accommodate its length. Using a hacksaw, make a clean, straight cut through the PVC pipe at the marked location. Remove the cut piece of pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/edGcVMI5ULc</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6929-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IqPHX0YR-xQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Remove Old Valve Assembly — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Using a PVC cutter, cut the pipes on both sides of the old, leaky valve assembly. Make the cuts as close to the existing fittings (elbows) as possible to preserve the maximum length of pipe for connecting the new assembly. Once cut, remove the entire old valve section from the ground.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IqPHX0YR-xQ</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6929-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CpgCqpKSQP4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Pipe End — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Examine the end of the pipe that was inserted into the fitting. The pipe end must be perfectly round, clean, and smooth. If the cut is jagged or angled, use the correct pipe cutter for the material (e.g., a copper tubing cutter for copper, a ratchet-style cutter for PEX) to make a fresh, square cut. Use a deburring tool to remove any sharp edges or burrs from both the inside and outside of the pipe end. If the pipe surface is deeply scratched, painted, or heavily sanded in the area where the O-ring seals, this can cause a leak. Cut the pipe back to a clean, undamaged section.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CpgCqpKSQP4</video:player_loc>
      <video:duration>158</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6932-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fm1i9cvwWes/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Main Replacement Pipe — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Place a new piece of PVC pipe into the gap between the two couplings. Use a marker to accurately mark the required length for the new pipe section. Remove the pipe and place it on a stable surface, like a piece of wood laid across the trench. Use a hacksaw to carefully cut the pipe at the marked line, ensuring a straight and clean cut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fm1i9cvwWes</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6932-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RhtWaKag7js/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create the PVC Patch — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Using a hacksaw, cut a section of spare PVC pipe that is slightly longer than the crack in the leaking pipe. Smooth the cut edges by hand. Use a ruler and marker to draw two parallel lines along the length of the pipe section. Carefully saw along these lines to remove a strip, creating a C-shaped patch that can fit over the leaking pipe. Clean any burrs from the new cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RhtWaKag7js</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6932-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M0Uy0G40Nb8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Prepare Copper Pipe — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Cut out a large section of the copper pipe around the burst area to ensure complete removal of the weakened copper. Deburr the cut ends of the copper pipe and mark the insertion depth on the pipe using a marker or pen.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M0Uy0G40Nb8</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6927-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EmeBXRfiMDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks and Functionality — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Slowly turn the water supply back on at the shut-off valves. Check the supply line connections for any leaks. Run water into the sink and let it drain. While the water is running, thoroughly inspect the new drain assembly, tailpiece, and P-trap connections for any signs of dripping. Test the pop-up stopper to ensure it operates correctly, holding water when closed and draining when open.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EmeBXRfiMDQ</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6927-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qwX8iskwZvw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Dry the regulator and connections completely with a towel. Slowly turn the main water valve back on. As the system fills, listen for air to escape from the open faucets. Once water flows steadily, turn the faucets off. Thoroughly inspect the top and bottom union connections on the regulator for any signs of leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qwX8iskwZvw</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6927-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U7eRkan8JzU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Final Leak Check — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>This is a crucial final check before closing the wall. Open the main water supply to fully pressurize the entire plumbing system. Meticulously inspect every single pipe joint and connection for any signs of water drips or leakage. Resolve any leaks found before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U7eRkan8JzU</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6926-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LkpQEkP13WU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Clamps — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Using a 5/16 inch socket wrench, tighten the two hose clamps on the stainless steel shield. It is important to alternate between tightening the two clamps. Tighten one a few turns, then switch to the other, and repeat this process until both clamps are firmly tightened. This ensures the gasket is compressed evenly, creating a strong, watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LkpQEkP13WU</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6926-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EPr2URunqug/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Clamp — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Once the clamp is in position, bring the bolt assembly back into place and begin to hand-tighten the nut. After it&apos;s finger-tight, use an appropriately sized wrench to continue tightening the nut. As you tighten, the clamp will compress the rubber gasket against the pipe, sealing the leak. Continue tightening until the leak stops completely and the clamp feels snug and secure. In the video, an 11/16 inch wrench is used.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EPr2URunqug</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6926-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M2ab7wbSvnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Clamp — How to Connect a PVC Drain to a Cast Iron Pipe</video:title>
      <video:description>Use an open-end wrench to tighten the bolt on the pipe clamp. Turn the bolt until the clamp is snug and securely fastened to the pipe. This action compresses the rubber gasket against the pinhole, creating a watertight seal and stopping the leak. Do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M2ab7wbSvnc</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6920-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/buMBe84erJ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Caulk the Base — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>To complete the repair, apply a continuous bead of bathroom-grade silicone caulk around the entire base of the toilet. This will hide the trimmed shims, prevent water from getting underneath, and give the installation a professional, finished appearance. Smooth the caulk bead with a wet finger or a caulking tool. Allow it to cure fully as per the manufacturer&apos;s directions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/buMBe84erJ8</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6920-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CD7ZN0D0wiM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Silicone to Flange — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Begin by applying a generous bead of 100% silicone caulk around the top surface of the existing, low-set toilet flange. To achieve a thick bead, which is necessary for a good seal, lift the tip of the caulk gun slightly away from the flange as you apply the silicone. This bead will act as both a sealant and an adhesive for the flange spacers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CD7ZN0D0wiM</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6920-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7qqeXJE9FXI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Base for Sealing — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Before applying sealant, thoroughly clean the area around the base of the toilet and the floor where the caulk will be applied. Use a clean, dry cloth to wipe away any dust, dirt, or moisture. A clean surface ensures proper adhesion for the silicone sealant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7qqeXJE9FXI</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6923-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/D3XXnA2rF8o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure New Flange Ring — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Using a cordless drill with a Phillips head bit, drive the provided screws through the pre-drilled holes in the new flange ring and into the subfloor. Ensure you use enough screws to secure the ring firmly to the floor, preventing any movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/D3XXnA2rF8o</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6923-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zsh_WrCFG-A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure the Repair Ring — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Carefully place the Oatey Fix-It Flange Repair Ring onto the adhesive-coated old flange. Press it down firmly to ensure good contact and spread the adhesive. Align the ring so that the toilet bolt slots are positioned correctly, typically parallel to the back wall. Then, use wood screws to secure the repair ring to the subfloor through the designated screw holes, ensuring the new flange is stable and immobile.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zsh_WrCFG-A</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6923-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zsXfoPmwK6Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Flange to the Floor — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>After applying PVC glue (not shown) and setting the flange in place, secure it to the subfloor. Use a cordless drill to drive long screws through the designated mounting holes on the flange. Ensure the screws are long enough to bite firmly into the wood subfloor or joists below, pulling the flange down tight against its supports.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zsXfoPmwK6Y</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6918-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Kv7iegFqaBY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Old Flange and Pipe Area — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Thoroughly clean the area by removing the old, broken-down wax ring, any existing repair clips or hardware, and all other debris from the old flange and surrounding floor. A putty knife is effective for scraping away the stubborn wax. The goal is to have a clean, clear opening into the cast iron pipe and a clean floor surface to work on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Kv7iegFqaBY</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6918-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NHkcQt8JgbI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Flange and Toilet Base — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>While wearing protective gloves, use a putty knife to scrape all the old wax and any debris from the toilet flange on the floor. Use paper towels to wipe the area clean. Also, inspect the bottom of the toilet and clean off any residual wax from the horn. If there is a fabric-like material stuck to the toilet, as shown in the video, use pliers to pull it off. Thoroughly clean the area to ensure a good seal with the new ring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NHkcQt8JgbI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6918-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SDKCgAKwovI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Flange and Install New Wax Ring — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>With the toilet removed, you will see the closet flange and the old wax ring. Use a putty knife to scrape away all of the old wax from the flange. Remove any debris to ensure a clean surface. Insert the new closet bolts into the slots on the flange. Next, place the new wax ring over the toilet drain opening, pressing it firmly to adhere it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SDKCgAKwovI</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6919-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hyr_E4rt9L8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Align Closet Bolts — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Insert the two brass closet bolts into the slots on the flange extender. Use a tape measure to ensure the bolts are positioned correctly for the toilet&apos;s rough-in measurement, typically 12 inches from the finished wall to the center of the bolts. Use a screwdriver to tighten the retaining washers on the bolts to hold them upright and in place during toilet installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hyr_E4rt9L8</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6919-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tcpa34lBX3w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Toilet Rough-In Distance — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>To ensure your new toilet will fit correctly, you must measure the rough-in distance. Begin by placing the end of a tape measure against the finished wall directly behind the toilet flange. The measurement should be taken from the surface of the wall, not the baseboard. Extend the tape measure out to the center of the toilet flange, using the closet bolts as a guide for the centerline. A standard toilet rough-in is 12 inches from the finished wall to the center of the drain. Verify this distance. If you are framing a new bathroom, ensure you account for the thickness of the drywall (typically half an inch) when setting the flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tcpa34lBX3w</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6919-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GSJMKtZ-Spk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Set the Toilet Drain Rough-In — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>The plumber positions the PVC drain pipe assembly between the wooden floor joists. Using a tape measure, he measures the distance from the bare wood wall framing to the center of the toilet drain fitting. He explains that while a 12-inch rough-in from the framing is typical for a standard drywall finish, he is setting his at 13 inches. This extra inch accounts for the future installation of half-inch drywall and tile, ensuring the toilet will fit correctly against the finished wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GSJMKtZ-Spk</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6921-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IjZej0pGSR0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Silicone Sealant — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Remove the flange spacer after the dry fit. Take the tube of 100% silicone sealant and apply a generous, continuous bead around the top surface of the old, cleaned flange. The goal is to create a complete, watertight seal between the old flange and the new spacer. The user in the video applies an extra thick bead due to the warped nature of his old flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IjZej0pGSR0</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6921-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9LFWwy1B5FI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Silicone — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Prepare your silicone tube by cutting off the tip of the cartridge and screwing on the nozzle. Initially, apply a thin bead of silicone deep into the joint to ensure it is fully filled. Next, use a utility knife to cut the nozzle wider and at an angle. Apply a second, thicker layer of silicone over the first, ensuring there is enough material to create a solid, smooth seal. Move the caulking gun steadily along the joint, applying consistent pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9LFWwy1B5FI</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6921-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KpKONG6moWc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Flange Extenders — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Place the black rubber flange extender onto the caulk, ensuring the closet bolts are inserted into the slots. Apply another bead of sealant on top of the rubber extender. Then, place the white plastic flange extender on top, aligning the bolt slots. This stacked method raises the flange to the correct height.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KpKONG6moWc</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6922-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HWHlB-xJXMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Toilet — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>After the flange extender is securely screwed down, the final steps are to prepare for the toilet installation. Insert new closet bolts into the slots on the yellow extender. Place a new wax ring onto the extender. Finally, carefully lower the toilet onto the flange, aligning the holes in its base with the closet bolts, and press down firmly to set the toilet and create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HWHlB-xJXMY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6922-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cCPLGu0mces/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reset and Secure the Toilet — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Carefully lift the toilet and align the holes in its base with the new closet bolts. Lower the toilet straight down onto the wax ring. Press down firmly and sit on the toilet, rocking gently, to compress the wax ring evenly and create a tight seal. Reinstall the washers and nuts on the closet bolts and tighten them alternately until snug. Do not overtighten. Place the decorative caps back on the bolts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cCPLGu0mces</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6922-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CD7ZN0D0wiM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set the Toilet Bowl — How to Install a Toilet Flange Extender After Tiling</video:title>
      <video:description>Carefully lift the new toilet bowl. Position it directly over the flange, using the long closet bolts as guides to align the holes in the base of the toilet. Lower the toilet straight down onto the wax ring. Once the toilet is resting on the floor, press down firmly and evenly on the bowl with your body weight. This action compresses the wax ring, creating the final watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CD7ZN0D0wiM</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6916-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kHqlFz2lf4Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Isolate the Leak to the Service Line — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>To check if the leak is in the main water line feeding your house, you must first shut off the main water supply valve, which is usually located inside near where the pipe enters the basement. After closing this valve, perform the overnight meter test again, but this time on your outside meter if you have one. Record the reading on the outside meter at night and check it again in the morning. If the reading on the outside meter has changed while the water to your house was shut off, the leak is located in the pipe between the meter pit and your indoor shutoff valve, which may require a plumber to fix.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kHqlFz2lf4Q</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6916-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YWPs-_pA2N8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Re-check the Water Meter — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>After shutting off the irrigation system, return to the water meter. Check to see if the meter is still moving. If it has stopped, the leak is located somewhere in your irrigation system. If it is still spinning, the leak is not in the irrigation system, and you must proceed to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YWPs-_pA2N8</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6916-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zzpoaf4jP_8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform a Water Meter Leak Test — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>First, ensure no water is being used anywhere in or outside your home. Then, locate your water meter, typically in a box by the street. Open the lid and observe the leak indicator, which is a small, sensitive dial (often a red dot, blue triangle, or star). If this indicator is spinning or moving at all, it confirms that water is flowing through the meter, indicating a leak somewhere in your plumbing system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zzpoaf4jP_8</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6912-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YWPs-_pA2N8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Confirm the Leak at the Water Meter — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>The first step is to confirm that there is indeed a continuous water leak. Locate your water meter, which is typically in a box near the street. Open the cover and observe the meter. If the digital display is changing or a physical leak indicator (often a small triangle or wheel) is spinning, it confirms water is flowing through the meter even when all faucets and appliances are off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YWPs-_pA2N8</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6912-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4R_XuAXijME/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Flow and Confirm Leak — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>Observe the digital display on the water meter. Look for a low flow indicator, which may be a flashing icon or a symbol indicating movement. If this indicator is active and the numerical reading is actively increasing, it confirms that water is flowing through the meter, indicating a leak somewhere on your property.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4R_XuAXijME</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6912-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8x1T-klGPAk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demonstrate Water Flow on the Meter — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>To understand what water usage looks like on the meter, go to a nearby sink and turn on the faucet. Let the water run and then return to the water meter. Observe the leak indicator (the red triangle) again. You will see that it is now spinning, which demonstrates that the meter is detecting the flow of water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8x1T-klGPAk</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6913-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6nO9mhJ-S24/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>Locate the water shut-off valve for the outdoor faucet, which is typically found inside the house in the basement or a crawl space directly behind where the faucet is located outside. Turn the valve handle clockwise until it is fully closed to stop the water flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6nO9mhJ-S24</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6913-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8Lpq-VhJGx8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Main Water Supply — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>Before starting the repair, locate the main water shut-off for the house. This is typically found outside near the water meter. Use a pair of pliers to turn the valve perpendicular to the pipe to shut off the water supply completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8Lpq-VhJGx8</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6913-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XDiKNg-tVFc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Main Shut-off Valves are Open — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>Locate the main water shut-off valves, which are typically found on either side of the water meter. For older homes with a gate valve (a round handle), turn the handle counter-clockwise as far as it will go to ensure it is fully open. For newer homes with a ball valve (a lever handle), verify the handle is parallel (in-line) with the water pipe, which indicates it is in the open position. Check both valves to confirm they are not partially closed and restricting water flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XDiKNg-tVFc</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6914-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CBH68M4q8QU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Compare Readings to Confirm Leak — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>After a period of at least 8 hours during which no water was used (e.g., the next morning), return to the water meter and read the odometer again. Compare this new reading to the one you recorded previously. If the number has increased at all, it confirms that water has flowed through the meter, indicating an unintentional water use, which means there is a leak somewhere in your plumbing system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CBH68M4q8QU</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6914-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GnqNB7ZuTLU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ensure All Water is Off — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>Before checking the water meter, ensure that all water sources inside and outside the home are turned off completely. This includes all faucets, the dishwasher, the washing machine, and any irrigation systems. Confirm with everyone in the household that no water will be used during the test.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GnqNB7ZuTLU</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6914-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XA2ay-0E46Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check the Leak Indicator for Movement — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>With all faucets and water-using appliances in the house turned off, observe the face of the water meter. Identify the small dial, often shaped like a triangle or star, which serves as the low-flow or leak indicator. The narrator refers to this as the &apos;delta&apos; dial. If this dial is moving or spinning, it confirms that water is flowing through the meter, indicating a leak.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XA2ay-0E46Q</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6915-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h1sXXCYgEFM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open the Meter Box — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>Using a water meter key or a large screwdriver, carefully pry open and lift the lid of the meter box. Be cautious as you open it, looking out for any insects or critters that might be inside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h1sXXCYgEFM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6915-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MLvzDPafn6s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Water Meter Box — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>The first step is to find the water meter box for your property. These are typically located in the ground in your front lawn, close to the curb or sidewalk. Look for a round metal lid that may be labeled &apos;WATER&apos; or with the city&apos;s name.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MLvzDPafn6s</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6915-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MLvzDPafn6s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open the Meter Box Lid — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>To access the meter, you will need a water meter key, which is a long metal tool with a T-handle and a specialized end. Insert the key&apos;s end into the keyhole on the meter box lid. Turn the key counter-clockwise and lift to pry the heavy lid off. Place the lid next to the opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MLvzDPafn6s</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6911-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2Avph9_io-Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Water Flow — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>With all water sources in and around your house turned off (faucets, showers, sprinklers, etc.), observe the meter&apos;s display. On a digital meter like the one shown, look for two signs of water flow: first, check if the numbers, particularly the last two digits on the right, are changing. Second, look for a small, circular flow indicator icon on the display. If either of these is active, it indicates that water is flowing somewhere on your property, suggesting a leak.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2Avph9_io-Y</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6911-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U8LZguy7D0s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the faucet — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>Turn the water supply back on and test the faucet to ensure there are no more leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U8LZguy7D0s</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6911-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cmFfLbY7tlQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Faucet — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>Turn the water supply back on and check for leaks. Test the faucet by turning the water on and off to ensure it&apos;s functioning properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cmFfLbY7tlQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6917-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ONLpos1e7yQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Isolation Leak Test — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>If the first test indicated a leak, you now need to isolate its location. Go back inside and turn your internal stop tap completely off (clockwise). Return to the water meter and take a new, precise reading. Wait for another 30 minutes without using any water. After the wait, take a final reading of the meter. If the meter&apos;s reading has changed during this second test, the leak is on the external supply pipe (the section between the meter and your internal stop tap). If the meter&apos;s reading has not changed during this test, the leak is located in your internal plumbing (somewhere after the stop tap).</video:description>
      <video:player_loc>https://www.youtube.com/embed/ONLpos1e7yQ</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6917-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nSr_YGfEdmQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check the Water Meter — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>First, make sure no water is being used inside or outside your house. Then, locate your water meter and observe it. If the leak indicator (often a small triangle or dial) is turning or the numbers on the meter are advancing, it&apos;s a definitive sign that water is flowing through the pipe, confirming a leak.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nSr_YGfEdmQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6917-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cOkqhYAlu4U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Confirm the Leak at the Water Meter — How to Find an Underground Water Leak Using Your Meter</video:title>
      <video:description>To confirm a leak exists, first ensure all water fixtures inside and outside the house are off. Then, locate your water meter box, typically near the curb. Open the lid, possibly using a meter key. If the box is full of water, pump or bail it out. Observe the meter&apos;s low-flow indicator, which is usually a small red or black triangle or a small dial. If this indicator is spinning, even slowly, it confirms that water is passing through the meter, indicating a leak somewhere on your property.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cOkqhYAlu4U</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6910-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tkqwTU4iVAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert Bladder and Flush Clog — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>After unscrewing the cap from the cleanout pipe, insert the Drain Cleaning Bladder attached to the hose into the pipe. You only need to insert it a few inches. Have someone turn on the water supply to the garden hose. The bladder will inflate, sealing the pipe, and then release powerful jets of water to dislodge and flush the clog. Keep the water running until the drain is clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tkqwTU4iVAc</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6910-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0VoZSItedRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert and Activate the Bladder — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>Insert the drain cleaning bladder into the clogged floor drain. Push it in as far as it can comfortably go to ensure it passes the initial opening. Once it is in place, turn on the water supply to the garden hose. The bladder will swell with water pressure, creating a tight seal against the inside walls of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0VoZSItedRA</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6910-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gU2tmfx2fRw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush the Drain — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>With the bladder positioned in the pipe, turn on the water supply to the garden hose. The bladder will rapidly inflate, sealing off the pipe opening behind it. A powerful jet of water will then shoot forward from the tip of the bladder, dislodging and flushing the clog down the sewer line. Let the water run for several minutes to thoroughly clear any remaining debris from the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gU2tmfx2fRw</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6905-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0VoZSItedRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert and Activate the Bladder — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>Insert the drain cleaning bladder into the clogged floor drain. Push it in as far as it can comfortably go to ensure it passes the initial opening. Once it is in place, turn on the water supply to the garden hose. The bladder will swell with water pressure, creating a tight seal against the inside walls of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0VoZSItedRA</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6905-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hHw-eHH2h_I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tightening Coupler and Water Testing — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>With the flexible coupler positioned over the pipe junction, use a screwdriver or nut driver to securely tighten both hose clamps. Ensure they are very tight to create a waterproof seal. After tightening, conduct a water test by pouring several gallons of water into the tub and letting it drain. While it drains, check the new connection carefully from the access panel to ensure there are no drips or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hHw-eHH2h_I</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6905-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SxUUsgq9wlY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up and Replace Cap — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>After the blockage is cleared, turn off the water and carefully pull the garden hose out of the clean-out pipe. Clean any spilled waste from the area. Securely screw the inspection cap back onto the pipe to seal the system. Remember to call a professional septic service to schedule a tank pumping, as this is only a temporary fix.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SxUUsgq9wlY</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6906-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W6wSiCeYh2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access and Clean Line — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>Once the line is empty, you can remove the Plug Puller tool by loosening the hose clamps. The cleanout is now open and ready for you to insert a drain snake or auger to clear the blockage. The cleanout cap will be inside the containment unit; retrieve it, clean it, and set it aside for reinstallation after the line is cleared.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W6wSiCeYh2c</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6906-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/erWRQNgVFw0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Drainage Pipes — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>The third potential cause is an opening in the drain line itself. Go to the area where your plumbing is exposed, such as a basement or crawlspace. Visually inspect all the drain pipes connected to the shower. Look for any loose-fitting pipes, or more commonly, a cleanout cap that is missing or has come undone. These openings allow sewer gas to escape directly into your home.</video:description>
      <video:player_loc>https://www.youtube.com/embed/erWRQNgVFw0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6906-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/INae6g0CZ0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install a Cleanout Fitting (Door Elbow) — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>At the point where the bathroom drainage pipe exits the exterior wall, install a T-fitting with a threaded cap, often called a &apos;door elbow&apos; or cleanout. This fitting is essential for maintenance. If a blockage occurs in the line, you can simply unscrew the cap and insert a drain snake or a high-pressure water hose to clear it. It is vital not to terminate the air vent at this low point.</video:description>
      <video:player_loc>https://www.youtube.com/embed/INae6g0CZ0c</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6907-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eL0Sm0xv16k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Water Pressure — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>Walk back to the water spigot and turn on the water supply to the garden hose. The water will flow into the bladder, causing it to inflate and create a seal inside the pipe. High-pressure jets of water will then be forced out of the tip of the bladder, directed at the clog. The bladder and hose may pulsate as the pressure builds and releases. Allow the water to run for a minute or two to work on the blockage. You may see some water bubbling back out of the drain opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eL0Sm0xv16k</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6907-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CWQC2giE-vQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Water Pressure to Clear Clog — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>With the bladder securely in the pipe, turn on the water supply to the hose. The bladder will inflate and expand, creating a tight seal against the pipe walls. Pressurized water will then shoot from the tip of the bladder, powerfully dislodging and flushing the clog down the drain. Keep the water running until you can hear or see that the drain is clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CWQC2giE-vQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6907-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0VoZSItedRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush the Clog with Water Pressure — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>With the bladder inflated and sealing the pipe, the water pressure from the hose is now directed entirely at the clog. This creates a powerful jet of water that pushes and breaks up the blockage, flushing it down the main line. Allow the water to run for an extended period, approximately 10 minutes, to ensure the clog is completely cleared.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0VoZSItedRA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6908-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/G2Varyz1AWA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unclog the Drain — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>Insert the hose with the attached water bladder into the cleanout pipe. Feed the hose as far as it can go, pushing it towards the blockage. Once in position, turn on the water supply fully. Allow the water to run for approximately 10 to 15 minutes. The bladder will seal the pipe and the water pressure will work to dislodge and flush the soft clog down the line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/G2Varyz1AWA</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6908-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/43ZchEMW9-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand the Drain Bladder&apos;s Function — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>Familiarize yourself with the drain bladder. It&apos;s a tool that attaches to a standard garden hose. When water is turned on, the bladder inflates to create a tight seal inside the drain pipe. Once sealed, it releases a powerful jet of water to dislodge the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/43ZchEMW9-g</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6908-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nMCVgSpOmos/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Use a Drain Bladder — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>A drain bladder, also known as a blow bag, uses water pressure to clear clogs. Attach the bladder to a standard garden hose and insert it into the clogged pipe. When you turn on the water, the bladder inflates to create a tight seal against the pipe walls. Water then shoots out of the tip at high pressure, forcing the clog down the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nMCVgSpOmos</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6909-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f_fvqoS5NgY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Use a Drain Bladder — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>Attach a drain bladder to a garden hose, turn on the water supply at the faucet and insert the drain bladder into the drain opening ensuring a tight seal. Once sealed turn on the water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f_fvqoS5NgY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6909-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0VoZSItedRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert and Activate the Bladder — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>Insert the drain cleaning bladder into the clogged floor drain. Push it in as far as it can comfortably go to ensure it passes the initial opening. Once it is in place, turn on the water supply to the garden hose. The bladder will swell with water pressure, creating a tight seal against the inside walls of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0VoZSItedRA</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6909-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tkqwTU4iVAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert Bladder and Flush Clog — How to Use a Drain Cleaning Bladder to Clear a Clog</video:title>
      <video:description>After unscrewing the cap from the cleanout pipe, insert the Drain Cleaning Bladder attached to the hose into the pipe. You only need to insert it a few inches. Have someone turn on the water supply to the garden hose. The bladder will inflate, sealing the pipe, and then release powerful jets of water to dislodge and flush the clog. Keep the water running until the drain is clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tkqwTU4iVAc</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6898-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RnX27GMnmv8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run the Main Drain Line — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Begin by running a 2-inch vertical PVC drain pipe up through the floor. Per plumbing code, this vertical pipe must connect to a 3-inch horizontal drain line located under the floor. A 3-inch by 2-inch bushing is used to transition from the 3-inch sweep under the floor to the 2-inch vertical pipe that enters the wall cavity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RnX27GMnmv8</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6898-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u-ZILYISeX8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solvent Welding and Connecting to Waste Line — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>This step creates the permanent plumbing connection. Begin by preparing the cut pipe section and the drain outlet using a pipe cleaner and primer. Apply the appropriate solvent cement (ABS or PVC) to the outside of one end of the pipe and the inside of the drain outlet. Insert the pipe into the drain with a twisting motion to ensure a complete bond. Next, prepare the P-trap opening with cleaner and primer. Apply solvent cement to the inside of the P-trap and the outside of the free end of the pipe attached to the drain. Carefully lower the entire assembly into place, again using a twisting motion as you insert the pipe into the P-trap to create a secure, watertight connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u-ZILYISeX8</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6898-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/METiGRawXgY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut, Glue, and Install the Reducer Assembly — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>After a successful dry-fit, prepare for permanent installation. If necessary, cut the straight pipe section of the slip-joint adapter to the correct length using a pipe cutter or hacksaw. Apply PVC primer, followed by PVC cement, first to the inside of the reducer bushing and the outside of the adapter&apos;s pipe, and press them together firmly. Then, apply primer and cement to the inside of the 2-inch drain pipe and the outside of the reducer bushing. Firmly push the combined adapter/reducer piece into the drain pipe, giving it a quarter turn to evenly distribute the cement and ensure a strong bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/METiGRawXgY</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6900-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RnCOl8sudlE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Adapter and Shutoff Valves — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>First, apply PVC cement to the drain stub-out and attach the P-trap adapter. Next, slide decorative escutcheons over the hot and cold water supply pipes. Place half-inch PEX crimp rings onto the pipes, followed by the PEX angle stop valves. Use a PEX crimping tool to securely fasten the rings, creating a watertight seal for both the hot and cold water lines. Ensure the valve outlets are facing straight up to facilitate easy connection to the faucet supply lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RnCOl8sudlE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6900-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YD7CyZ8FKw8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New PEX Plumbing — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>With the old, damaged pipes removed, install the new PEX tubing. Start by attaching a threaded PEX adapter to the existing galvanized pipe. Measure and cut the PEX tubing to the required lengths. Assemble the new lines using PEX fittings, such as T-fittings and elbows, to match the original plumbing configuration. Slide a PEX crimp ring over the pipe, insert the fitting, position the ring correctly, and use a PEX crimping tool to secure each connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YD7CyZ8FKw8</video:player_loc>
      <video:duration>105</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6900-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6pVMLMaHKrw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Main Water Lines — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>The final plumbing step is to connect the new PEX lines to the main hot and cold water supply. First, locate the main water shutoff for the house and turn it off. Drain the remaining water from the pipes by opening a faucet. Cut the existing copper pipes in the ceiling using a pipe cutter. Connect the new red and blue PEX lines to the corresponding copper lines using push-to-connect fittings or other appropriate adapters. In the video, push-to-connect fittings are used to join PEX to the copper, and then the final connections are made with PEX crimps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6pVMLMaHKrw</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6901-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HaSjQCeWmgI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Cut the Damaged Pipe — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Before beginning the repair, shut off the main water supply to your home and open a faucet to drain the line and relieve pressure. The video shows a leak in a 1/2 inch PEX pipe located in an attic, surrounded by insulation. To begin the repair, use a PEX pipe cutter to make a clean, straight cut on the pipe on both sides of the leak. Remove the damaged section of pipe completely, which creates two open ends ready for the new fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HaSjQCeWmgI</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6901-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XzfA56hIG7U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install PEX Water Lines — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>The presenter prepares for and installs the PEX water supply lines. Using a drill with a 5/8-inch auger bit, he drills two holes through the wooden bottom plate of the wall, one for the hot and one for the cold line, aligning them below the corresponding inlets on the outlet box. He feeds the red and blue PEX pipes up through the holes. For each line, he slides a 1/2-inch stainless steel crimp ring onto the pipe. He then pushes the end of the PEX pipe fully onto the brass barb fitting of the valve. He positions the crimp ring about 1/8 of an inch from the base of the fitting. Using a PEX crimping tool, he squeezes the handles until the tool fully closes, which compresses the ring and secures the pipe to the fitting, creating a permanent, leak-proof connection. He repeats the process for the second water line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XzfA56hIG7U</video:player_loc>
      <video:duration>117</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6901-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o-UVrvWbu28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connecting PEX Supply Lines — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Connect the hot and cold water supply lines using PEX tubing. This valve has built-in PEX connections. Slide a PEX crimp ring onto the blue (cold) PEX tube, and push the tube onto the cold inlet of the valve. Position the crimp ring 1/8 to 1/4 inch from the end of the tube and use a PEX crimping tool to create a secure connection. For the hot water side, connect a 90-degree PEX fitting to a length of red (hot) PEX tubing, then connect the other end of the 90-degree fitting to the hot inlet on the valve, crimping both connections securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o-UVrvWbu28</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6904-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xA7v7a1ONhw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Hoses and Install Faceplate — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Once the press connections are made, attach the braided stainless steel supply hoses from the washing machine to the newly installed valves. Hand-tighten and then give a quarter-turn with pliers. Insert the washing machine&apos;s drain hose into the drain standpipe. To finish the job, snap the decorative faceplate back onto the washing machine outlet box.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xA7v7a1ONhw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6904-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f3Ol1p7AUCI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Installation Orientation — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>If your water supply lines are coming from the ceiling, as is common in basement installations, the washing machine outlet box can be installed upside down. This configuration allows the supply pipes to be plumbed into the top of the box, and the drain hose to exit through the bottom, adapting the unit for a top-feed application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f3Ol1p7AUCI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6904-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DmTEPqAtWYY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalize and Test — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>After the drywall is installed and finished, snap the decorative faceplate onto the outlet box. Ensure the hot and cold water valves on the box are in the closed position. Turn the main water supply back on and check all new connections for leaks. The valves can be opened once the washing machine hoses are connected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DmTEPqAtWYY</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6897-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eGICy2rgB5c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing the Washer Box — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Position and install the washer box within the wall framing. Describe the typical installation height and the considerations for local codes that may dictate the placement. Discuss the materials used in Omaha, mainly copper or CPVC pipe, and point out the threaded options for different pipe types.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eGICy2rgB5c</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6897-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kvr_5uTTz7Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Washer Outlet Box — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Position the washing machine outlet box between two exposed wall studs at the appropriate height. Using a power drill, drive screws through the box&apos;s mounting brackets and into the studs to secure it firmly in place. Ensure the box is level and sits flush with where the new drywall will be.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kvr_5uTTz7Y</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6897-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BIZ_KUdxz3k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Washing Machine Outlet Box — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>The washing machine outlet box is positioned against the wall studs. The top of the drain standpipe is primed and cemented into the drain connection at the bottom of the box. The box is then securely fastened to the studs using screws. A level is placed on top of the box to ensure it is installed correctly and is not tilted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BIZ_KUdxz3k</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6902-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aNvH0069lXs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Outlet Box — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Position the outlet box between the studs at your marked height. Ensure the front of the box is flush with the intended finished wall surface. Secure the mounting brackets to the studs using a power drill and screws. Alternatively, nails can be used.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aNvH0069lXs</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6902-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZiC7R1qcwO4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Outlet Box — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Position the SharkBite Ice Maker Outlet Box between two wall studs at your desired height. A typical height is 18 inches from the finished floor to the top of the outlet box. Using a power drill, drive screws through the holes in the mounting brackets on the sides of the box and into the wood studs to secure it firmly in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZiC7R1qcwO4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6902-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Il6n5_BklLE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Outlet Box — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Position the outlet box between the two wall studs, aligning the bottom of the box with the pencil mark you made earlier. Using a power drill, drive screws through the holes in the mounting brackets and into the studs to secure the box firmly in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Il6n5_BklLE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6903-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XZOOa4cTpgo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Cut Drywall Opening — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>First, use a stud finder to locate a clear space between wall studs. Then, hold the ice maker outlet box frame against the wall and trace the inside opening with a marker to create a cutting guide. Use an oscillating multi-tool to carefully cut along the marked lines and remove the section of drywall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XZOOa4cTpgo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6903-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zj_M5rF_eXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Washer Box — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Begin by using an oscillating multi-tool to carefully cut around the flange of the old washer box, separating it from the drywall. Once the flange is free, disconnect the old push-connect valves from the PEX pipes. Use a drill or impact driver to remove the screws securing the box to the internal wall studs. Finally, cut the body of the old box with the oscillating tool as needed to completely remove it from the wall cavity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zj_M5rF_eXU</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6903-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BIZ_KUdxz3k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Washing Machine Outlet Box — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>The washing machine outlet box is positioned against the wall studs. The top of the drain standpipe is primed and cemented into the drain connection at the bottom of the box. The box is then securely fastened to the studs using screws. A level is placed on top of the box to ensure it is installed correctly and is not tilted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BIZ_KUdxz3k</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6899-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E5rzXfr3zWA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pressurize and Test System — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Once all connections are tight, slowly turn the main water supply valve back on. You will hear the pipes fill with water. Carefully inspect all the new connections—the ProPress fittings, the PEX cinch connections, and the union nuts on the PRV—to ensure there are absolutely no drips or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E5rzXfr3zWA</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6899-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zwyb-IvczXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Water On and Check for Leaks — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Once the installation is complete and all connections are tight, it&apos;s time to check for leaks. First, ensure all taps that you opened are now closed. Go to your main water shut-off valve and turn it back on slowly. Listen for the sound of water filling the pipes. Return to your work area and carefully inspect each of the new joints for any signs of dripping water. Use a dry paper towel to wipe the joints, which will make even the smallest leak visible. If you find a leak, turn the water off again and slightly tighten the connection before re-testing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zwyb-IvczXw</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6899-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4lZypQN3C1k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Check for Leaks — How to Install a Washing Machine Outlet Box</video:title>
      <video:description>Slowly turn the water back on at the shut-off valve. Use a flashlight to carefully inspect every new connection for any sign of dripping. Run the sink faucet to build pressure and purge air from the lines. Wait several minutes and check all connections again. It is critical to be certain there are no leaks before moving the refrigerator back.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4lZypQN3C1k</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6891-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I0i1j25gd-o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure House Water Pressure — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>To establish a baseline, measure the home&apos;s static water pressure. The inspector goes outside to a hose bib that has a water pressure gauge attached. He reads the gauge, which shows the incoming water pressure is 50 PSI.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I0i1j25gd-o</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6891-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S3PtYJed61c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check House Water Pressure — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>To ensure the expansion tank is properly pressurized, you must first determine your home&apos;s static water pressure. Screw a water pressure gauge onto an outdoor hose bib or spigot. Make sure no other water is being used in the house. Turn the spigot on fully, and read the pressure indicated on the gauge. This PSI reading is the target pressure for your expansion tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S3PtYJed61c</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6891-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GE3xzDYyhNo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check System Water Pressure — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>The first step is to determine the water pressure of your home&apos;s plumbing system. Attach a water pressure gauge to an outdoor spigot or hose bib that is on the regulated side of your water system (after the pressure regulator). Turn on the spigot and read the pressure on the gauge. In the video, the pressure is about 65 PSI. This value is crucial as the expansion tank&apos;s pressure needs to match it. After getting the reading, turn off the spigot and remove the gauge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GE3xzDYyhNo</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6893-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/37LJFCOkMlc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust and Secure the PRV — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>After locating the Pressure Reducing Valve (PRV) and consulting your utility, use an adjustable wrench to loosen the lock nut on the valve. Next, use a flathead screwdriver to turn the central adjustment screw; turn clockwise to increase pressure or counter-clockwise to decrease it. Make small adjustments and re-test the pressure with your gauge until it is within the desired range. Once the correct pressure is set, use the wrench to tighten the lock nut to secure the adjustment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/37LJFCOkMlc</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6893-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eDxx_od_LL0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Raise the Downstream Pressure — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>To increase the water pressure, first use an adjustable wrench to loosen the locknut located on the top of the pressure reducing valve. Turn the locknut counter-clockwise until it is loose enough to allow the adjusting screw to turn freely. With the locknut loosened, use a socket wrench to turn the central adjusting screw in a clockwise direction. As you turn the screw, the internal spring is compressed, which increases the pressure. Continuously monitor the downstream pressure gauge to see the pressure rise, and stop turning when it reaches your desired level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eDxx_od_LL0</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6893-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lNAAzs4C-lQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust the Pressure Reducing Valve — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>To adjust the pressure, first use an adjustable wrench to loosen the lock nut that secures the adjustment screw on top of the PRV. Once the nut is loose, use a flathead screwdriver to turn the threaded adjustment screw. Turning the screw clockwise will tighten an internal spring and increase the water pressure. Turning it counter-clockwise will loosen the spring and decrease the pressure. Make adjustments in small increments, such as one or two full turns at a time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lNAAzs4C-lQ</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6892-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xlwbzz9-azk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust the Regulator Screw — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>Using an adjustable wrench, loosen the locking nut that secures the adjustment screw on top of the regulator. You only need to loosen it slightly to allow the adjustment screw to turn. Once loose, use a large flathead screwdriver to turn the adjustment screw. To decrease the water pressure, turn the screw clockwise. To increase the pressure, turn the screw counter-clockwise. Make adjustments in small, quarter-turn increments.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xlwbzz9-azk</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6892-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nPEsh1L_Jao/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Review Adjustment Instructions — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>Understand the procedure for setting the pressure. The instructions indicate that to change the pressure, you must first loosen the jam nut on top of the valve, then turn the slotted adjusting screw. Turning the screw clockwise will increase the set pressure, and turning it counter-clockwise will lower it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nPEsh1L_Jao</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6892-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/L9JCi-jX58E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Lock Nut — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>After you have adjusted the pressure to your desired level, you must re-tighten the lock nut. Hold the adjustment bolt in place with one wrench while you use another wrench or pliers to turn the lock nut clockwise until it is snug. This will prevent the pressure setting from changing over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/L9JCi-jX58E</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6894-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GQ1DRy7Lkpo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>Once the new PRV is securely installed, slowly turn the main water supply back on. You will hear the pipes filling with water. Go back to the PRV and carefully inspect all connections for any drips or leaks. Also, check the faucet you left open upstairs; once water flows steadily, you can turn it off. If everything is dry, the installation is successful. If needed, the pressure can be adjusted using the screw on top of the PRV.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GQ1DRy7Lkpo</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6894-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/37LJFCOkMlc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust and Secure the PRV — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>After locating the Pressure Reducing Valve (PRV) and consulting your utility, use an adjustable wrench to loosen the lock nut on the valve. Next, use a flathead screwdriver to turn the central adjustment screw; turn clockwise to increase pressure or counter-clockwise to decrease it. Make small adjustments and re-test the pressure with your gauge until it is within the desired range. Once the correct pressure is set, use the wrench to tighten the lock nut to secure the adjustment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/37LJFCOkMlc</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6894-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/owXqUzupKnE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust the Pressure — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>To either increase or decrease the water pressure, use a wrench on the adjusting bolt at the very top of the regulator. To increase pressure, turn the bolt clockwise. To decrease pressure, turn the bolt counter-clockwise. When decreasing pressure, you must simultaneously open a nearby faucet very slightly to allow a small trickle of water to flow. This relieves the excess pressure from the downstream side of the system, allowing the gauge to show the new, lower pressure reading. Monitor the pressure gauge as you make small adjustments until you reach your desired setting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/owXqUzupKnE</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6895-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7ka66Cxheus/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Final Pressure — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>Continue making small adjustments until the pressure gauge shows a reading in the desired range, ideally between 65 and 70 PSI. For the most accurate final reading, it is recommended to let the system sit for a while, or even overnight, and check the pressure again. Once you are satisfied with the pressure, hold the adjustment bolt in place and tighten the lock nut to secure the setting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7ka66Cxheus</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6895-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xlwbzz9-azk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Re-Test and Finalize — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>After each small adjustment, go back and check the water pressure gauge again to see the effect of your change. Continue this process of making small adjustments and re-testing until the pressure reads within the desired 40-60 PSI range. Once the correct pressure is set, use the wrench to re-tighten the locking nut to secure the adjustment screw in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xlwbzz9-azk</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6895-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Lc0LNR8gUdg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust the Pressure Screw — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>With the locking nut loose, use a flathead screwdriver to turn the adjustment screw. Turn the screw clockwise to increase the water pressure or counter-clockwise to decrease it. Make small adjustments, turning the screw a quarter or half turn at a time, and then check the pressure gauge to see the result. Continue this process until you reach the desired pressure, being careful not to exceed 80 PSI.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Lc0LNR8gUdg</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6896-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ie_j3TFHpwg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the PRV — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>With the PRV assembly ready, place it into the gap in the cold water pipe. Ensure the arrow indicating water flow on the PRV body is pointing in the correct direction of the flow. Connect the compression fittings on both ends of the PRV to the pipes and tighten them securely with wrenches to create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ie_j3TFHpwg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6896-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QbliTlDsi08/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust System Pressure — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>Using an adjustable wrench, turn the adjustment bolt located on the top of the valve. Turning the bolt clockwise will increase the water pressure, while turning it counter-clockwise will decrease the pressure. You will need to turn the water on to verify the pressure as you adjust. Once you have set the pressure to your desired level (ideally between 50-75 PSI and not exceeding 80 PSI), tighten the locknut underneath the adjustment bolt to hold the setting in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QbliTlDsi08</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6896-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uyZTGtDrwEw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Valve — How to Adjust a Water Pressure Reducing Valve (PRV)</video:title>
      <video:description>Thread the new female union adapter onto the top pipe and tighten it securely with a wrench. Position the new PRV body between the top and bottom pipes, ensuring the flow arrow on the valve is pointing in the correct direction of water flow. Screw on the union nuts by hand, then use two large wrenches or pliers to fully tighten them, securing the valve in place. Finally, use a wrench to adjust the pressure setting via the screw on top of the valve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uyZTGtDrwEw</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6883-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bihc7Ey28hA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect and Crimp PEX Pipe — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>After the soldered joint has cooled, take a section of PEX pipe and slide a PEX crimp ring over the end. Push the PEX pipe fully onto the barbed end of the now-soldered adapter. Position the crimp ring so it&apos;s about 1/8 to 1/4 inch from the end of the pipe, ensuring it covers the barbed section. Use a PEX crimping tool to compress the ring firmly, securing the PEX pipe to the fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bihc7Ey28hA</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6883-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tio8rFOTTdc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach and Crimp Elbow — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>First, slide the PEX crimp ring over the end of the PEX tubing. Then, insert the barbed end of the PEX elbow fitting fully into the tubing. Position the crimp ring about 1/8 to 1/4 inch from the end of the tube, over the barbed portion of the fitting. Use the PEX crimper tool to firmly squeeze the ring until the tool fully closes, creating a secure, watertight connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tio8rFOTTdc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6883-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YD7CyZ8FKw8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New PEX Plumbing — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>With the old, damaged pipes removed, install the new PEX tubing. Start by attaching a threaded PEX adapter to the existing galvanized pipe. Measure and cut the PEX tubing to the required lengths. Assemble the new lines using PEX fittings, such as T-fittings and elbows, to match the original plumbing configuration. Slide a PEX crimp ring over the pipe, insert the fitting, position the ring correctly, and use a PEX crimping tool to secure each connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YD7CyZ8FKw8</video:player_loc>
      <video:duration>105</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6884-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-JXixHqU0Ho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Test New Shower Valve — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Dry-fit the new valve, copper pipes, and fittings to ensure proper alignment and to mark cutting lengths. Center the new valve in the access hole. After cutting the new pipes, clean all pieces and apply flux. Reassemble the valve system. For safety, spray the surrounding wood with water and use aluminum foil as a heat shield. Use a propane torch to heat each joint and apply solder to create the permanent connections. Test the new plumbing by installing the cartridge and handle, turning on the water main, and checking for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-JXixHqU0Ho</video:player_loc>
      <video:duration>134</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6884-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/v22nxC-yNYA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install PEX Tee Connections — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>To create branches for the different plumbing fixtures, cut the main PEX lines using a specialized PEX pipe cutter. Install brass tee fittings to branch off to the various drops. For each connection, slide a copper crimp ring onto the PEX pipe, push the pipe fully onto the fitting&apos;s barb, position the ring over the barb, and use a PEX crimping tool to compress the ring. This creates a strong, watertight seal. Repeat this process to create manifolds for all necessary hot and cold water drops.</video:description>
      <video:player_loc>https://www.youtube.com/embed/v22nxC-yNYA</video:player_loc>
      <video:duration>155</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6884-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NyMKfY5LbF0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>System Overview and Preparation — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Begin with a thorough visual inspection of the entire plumbing system. The system shown includes red PEX-A pipes for hot water and blue for cold, originating from a central distribution manifold. Lines run to a bathtub, toilet, vanity, kitchen sink, and washer box. A loop is created to and from the future water heater location. The plan is to turn on the main water supply and systematically open each valve on the manifold to pressurize the system and check for leaks at all connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NyMKfY5LbF0</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6886-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QpqFPR032E8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finishing, Painting, and Cleanup — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>The final stage involves finishing the drywall and painting. The drywaller applies joint compound (mud) and tape over the seams of the patches, feathers it out, and sands it smooth. They then apply a texture spray to match the existing wall finish. Once the texture is dry, the patches are primed and painted to blend seamlessly with the surrounding wall color. Finally, all protective coverings are removed and the area is cleaned.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QpqFPR032E8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6886-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/15vxtLIj5RM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch the Drywall — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>To repair the wall, first install pieces of wood (like 1x2s or 2x4s) inside the opening to act as backing for the drywall patch. Re-insert the piece of drywall you cut out earlier and secure it to the wood backing with drywall screws. Apply self-adhesive mesh tape over all the seams. Then, use a putty knife to apply a thin layer of joint compound over the tape and screw heads. Once dry, apply additional coats as needed, sand smooth, and then apply texture and paint to match the rest of the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/15vxtLIj5RM</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6886-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6xCg05ismO4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Texture and Paint — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Once the final coat of mud is completely dry and sanded smooth, apply a wall texture to the repaired area to match the surrounding wall&apos;s finish. After the texture dries according to the manufacturer&apos;s instructions, apply a coat of primer to seal the new drywall and mud. Once the primer is dry, paint the entire repaired area with a paint color that matches the existing wall for a completely blended and professional-looking finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6xCg05ismO4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6888-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6u1py7KHzzw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Access — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>To begin, you must gain access to both ends of the polybutylene pipe run you intend to replace. This may require cutting an access hole in the drywall. In the video, access is established through a hole in a wall and from the attic space above the ceiling. Before cutting any pipes, ensure the main water supply to the house is completely shut off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6u1py7KHzzw</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6888-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HaSjQCeWmgI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Cut the Damaged Pipe — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Before beginning the repair, shut off the main water supply to your home and open a faucet to drain the line and relieve pressure. The video shows a leak in a 1/2 inch PEX pipe located in an attic, surrounded by insulation. To begin the repair, use a PEX pipe cutter to make a clean, straight cut on the pipe on both sides of the leak. Remove the damaged section of pipe completely, which creates two open ends ready for the new fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HaSjQCeWmgI</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6888-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GfExmV-Hge4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Gather all necessary tools and materials for the job. You will need a way to cut the old galvanized pipe, such as a jigsaw with a metal-cutting blade, a handsaw, or an angle grinder. For removing old fittings, have two pipe wrenches ready. For the new PEX installation, you&apos;ll need a PEX pipe cutter, a PEX clamp tool, and adjustable wrenches. The required supplies include the correct diameter PEX tubing (blue for cold water), various PEX fittings like adapters and tees, PEX clamps, and Teflon tape for sealing threads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GfExmV-Hge4</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6889-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sr0FJIIOFnw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Main Water Supply — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Before starting the repair, locate the main water shut-off valve for the house. This is often found outside, in a basement, or a utility closet. Turn the valve handle clockwise until it is fully closed. To confirm the water supply is off, open a nearby faucet, such as the outdoor hose bib shown in the video, to drain any remaining water from the pipes and verify that the flow has completely stopped.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sr0FJIIOFnw</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6889-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YJaOCktcXPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain the Water Lines — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>After shutting off the main valve, use the water meter key to open the drain valve located in the same manhole. This allows any water remaining in the supply lines to drain out. To facilitate this process, go inside the garage and open the faucets on the sink and flush the toilet. This lets air into the system, allowing the water to drain completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YJaOCktcXPI</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6889-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wIOMkQChea8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Begin by locating the main water shut-off valve for your home, which is usually found near the water meter outside or in a basement/utility closet. Turn the valve clockwise to completely stop the flow of water. Once the water is off, go back to the faucet you are working on and open the handle to drain any remaining water left in the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wIOMkQChea8</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6890-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NyMKfY5LbF0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>System Overview and Preparation — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Begin with a thorough visual inspection of the entire plumbing system. The system shown includes red PEX-A pipes for hot water and blue for cold, originating from a central distribution manifold. Lines run to a bathtub, toilet, vanity, kitchen sink, and washer box. A loop is created to and from the future water heater location. The plan is to turn on the main water supply and systematically open each valve on the manifold to pressurize the system and check for leaks at all connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NyMKfY5LbF0</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6890-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iIaVniPyGI4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect and Repressurize — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>After confirming the vessel holds the correct charge, re-install it onto the system pipework, ensuring the connection is securely tightened. Close the hot tap you opened earlier. Re-open the main water supply valve to repressurize the cylinder. Thoroughly inspect the connection for any signs of water leakage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iIaVniPyGI4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6890-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QtysRkM1gEI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pressurize and Check for Leaks — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Connect a water source, like a garden hose, to the inlet of your test rig. Open the shutoff valve at the far end of the pipe assembly and turn on the water. Let the water run for a few seconds to purge all the air out of the pipe. Once only water is flowing out, close the shutoff valve. This will pressurize the entire assembly. Check the pressure gauge to confirm it&apos;s at a typical household pressure of 50-60 PSI. Carefully inspect the crimped fitting for any signs of weeping or dripping. To make detection easier, hold a dry piece of cardboard underneath the fitting and check it for any wet spots.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QtysRkM1gEI</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6885-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Vxz3mPXe0Ao/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run PEX Tubing Through Framing — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Begin by running the PEX tubing from the manifold location through the ceiling joists and wall studs to each fixture. Drill holes through the wooden framing to create a path. For 1/2 inch PEX, use a 3/4 inch drill bit to make pulling the tubing easier. For tight 90-degree turns, use metal bend supports to prevent kinking the pipe and avoid the need for extra fittings. Secure the tubing in place using plastic pipe clamps and a hammer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Vxz3mPXe0Ao</video:player_loc>
      <video:duration>98</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6885-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o0Gib81y7UM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run PEX Water Lines — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Starting from the water supply manifold, unroll and feed the cold (blue) PEX tubing through the drilled holes in the floor joists, following the planned path to the laundry room wall. Once the tubing is fed up into the wall cavity, pull enough slack to comfortably connect to the outlet box. Repeat the process for the hot (red) PEX tubing. Use PEX clips and a hammer or drill to secure the tubing to the joists to prevent movement and noise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o0Gib81y7UM</video:player_loc>
      <video:duration>129</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6885-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PlJw9KZ8qE4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify and Isolate Water Lines — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>The first step is to identify the specific plumbing lines you will be working with at your PEX manifold. Locate the cold water line (typically blue PEX) that runs to the toilet experiencing condensation. Also, identify a nearby hot water line (typically red PEX) that can be tapped into. The manifold valves for both lines should be shut off, and it is recommended to shut off the main water supply to the house as a precaution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PlJw9KZ8qE4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6882-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6pVMLMaHKrw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount and Connect the Valve — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Mount the prepared valve assembly to the blocking. Use a laser level to ensure the valve is positioned correctly and is plumb and level. Secure it to the blocking using screws. Next, run the PEX pipes for the hot water (red), cold water (blue), and fixture outlets (white). Cut the pipes to length and connect them to the valve&apos;s PEX adapters. Use a PEX crimping tool to secure the crimp rings over each connection, ensuring a tight seal. Carefully plan the order of crimps to ensure the tool has clearance for each one.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6pVMLMaHKrw</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6882-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YD7CyZ8FKw8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New PEX Plumbing — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>With the old, damaged pipes removed, install the new PEX tubing. Start by attaching a threaded PEX adapter to the existing galvanized pipe. Measure and cut the PEX tubing to the required lengths. Assemble the new lines using PEX fittings, such as T-fittings and elbows, to match the original plumbing configuration. Slide a PEX crimp ring over the pipe, insert the fitting, position the ring correctly, and use a PEX crimping tool to secure each connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YD7CyZ8FKw8</video:player_loc>
      <video:duration>105</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6882-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XzfA56hIG7U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install PEX Water Lines — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>The presenter prepares for and installs the PEX water supply lines. Using a drill with a 5/8-inch auger bit, he drills two holes through the wooden bottom plate of the wall, one for the hot and one for the cold line, aligning them below the corresponding inlets on the outlet box. He feeds the red and blue PEX pipes up through the holes. For each line, he slides a 1/2-inch stainless steel crimp ring onto the pipe. He then pushes the end of the PEX pipe fully onto the brass barb fitting of the valve. He positions the crimp ring about 1/8 of an inch from the base of the fitting. Using a PEX crimping tool, he squeezes the handles until the tool fully closes, which compresses the ring and secures the pipe to the fitting, creating a permanent, leak-proof connection. He repeats the process for the second water line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XzfA56hIG7U</video:player_loc>
      <video:duration>117</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6881-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o0Gib81y7UM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run PEX Water Lines — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>Starting from the water supply manifold, unroll and feed the cold (blue) PEX tubing through the drilled holes in the floor joists, following the planned path to the laundry room wall. Once the tubing is fed up into the wall cavity, pull enough slack to comfortably connect to the outlet box. Repeat the process for the hot (red) PEX tubing. Use PEX clips and a hammer or drill to secure the tubing to the joists to prevent movement and noise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o0Gib81y7UM</video:player_loc>
      <video:duration>129</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6881-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PlJw9KZ8qE4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify and Isolate Water Lines — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>The first step is to identify the specific plumbing lines you will be working with at your PEX manifold. Locate the cold water line (typically blue PEX) that runs to the toilet experiencing condensation. Also, identify a nearby hot water line (typically red PEX) that can be tapped into. The manifold valves for both lines should be shut off, and it is recommended to shut off the main water supply to the house as a precaution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PlJw9KZ8qE4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6881-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-57Q5OQR07Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Manifold Assembly — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>After the manifold is fully assembled and all crimps have been verified, it is installed in its final location within the building&apos;s framing. The video shows the completed red PEX hot water manifold installed between floor joists, secured to wooden blocking. It is connected to blue PEX cold water lines and other red PEX lines labeled for fixtures like &apos;Toilet&apos; and &apos;Vanity&apos;, demonstrating its function as a distribution hub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-57Q5OQR07Y</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6887-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tWojmXU978c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Expose Work Area — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>To properly access the damaged pipe, cut away any concealing materials like drywall from the ceiling. This ensures you have a clear and safe working area to measure, cut, and install the new pipe section. The user mentions that having easy access is the key to fixing almost any problem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tWojmXU978c</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6887-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/L6Fr6NqXs-0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extend the opening — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>The plumber extends the wall opening to access more of the drain pipe. He carefully cuts through the drywall and removes another section, revealing more of the pipe and supporting wood structure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/L6Fr6NqXs-0</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6887-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U_bgs1znmDo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Damaged Pipe — How to Replace Grey Polybutylene Pipe with PEX</video:title>
      <video:description>To prepare for the new installation, the damaged portion of the pipe must be removed. The presenter pulls the flexible grey PEX pipe through the access hole to have enough room to work. He then uses a utility knife to make a clean, straight cut through the PEX pipe, removing the old, cracked fitting and a small section of the pipe. This leaves a fresh end ready for the new fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U_bgs1znmDo</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6872-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vzoZzPR0ujk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Disposal — How to Install a New Dishwasher</video:title>
      <video:description>Shut off all power to the disposer at the breaker panel. If the disposal plugs into the wall, unplug it. If it&apos;s hardwired, remove the access panel to the wires and undo the electrical connections. Turn off the water supply to the sink. Place a bucket or pan underneath the disposer to catch any water. Detach the disposer from the drain pipe. If there&apos;s a drain tube from the dishwasher, detach that as well. Insert a screwdriver into the locking ring and unlatch the old disposer, carefully lowering it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vzoZzPR0ujk</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6872-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1MYWuSBM6Zo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power and Plumbing — How to Install a New Dishwasher</video:title>
      <video:description>Before beginning, ensure the garbage disposal is unplugged from the power outlet to prevent electric shock. If a dishwasher is connected, use a 3/8&apos; nut driver to loosen the hose clamp and detach the dishwasher&apos;s drain hose from the disposal&apos;s inlet port. Be prepared for some water to drain out. Next, use the 3/8&apos; nut driver or a flat-head screwdriver to unthread the two screws securing the tailpipe flange to the main drain outlet on the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1MYWuSBM6Zo</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6872-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WI_s2cPfzlg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Utilities and Access Pump — How to Install a New Dishwasher</video:title>
      <video:description>With the dishwasher pulled out, disconnect the three main utility lines. First, use a wrench to unscrew the braided water intake line. Second, release the spring clamp on the main drain hose and pull it off the pump; have a towel ready for water spillage. Third, locate the electrical junction box. Unscrew its cover, then unscrew the wire nuts to disconnect the power, neutral, and ground wires. Once all lines are disconnected, you can fully remove the dishwasher and lay it on its back to access the pump.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WI_s2cPfzlg</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6879-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/686O3THErJc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Disposal and Connect Plumbing — How to Install a New Dishwasher</video:title>
      <video:description>Lift the new disposal up to the mounting ring. Align the three tabs on the disposal with the ramps on the mounting ring and turn the disposal clockwise until it locks into place. Use pliers or the provided wrench to tighten the locking ring for a secure fit. Next, install the discharge elbow using the supplied gasket and screws. Reconnect the P-trap to the discharge elbow and tighten the slip nuts. Finally, connect the dishwasher drain hose to the dishwasher inlet and secure it with a hose clamp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/686O3THErJc</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6879-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XPqkB2E-Yx8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Drain Hose to Dishwasher — How to Install a New Dishwasher</video:title>
      <video:description>Locate the drain port on the left rear of the dishwasher base. Take the drain hose end with the 110-degree elbow and slide the silver spring clamp over it. Push the elbow firmly onto the drain port. Use pliers to open the silver spring clamp and slide it over the connection point to secure the hose tightly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XPqkB2E-Yx8</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6879-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N4Uv6vGHmuI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Plumbing — How to Install a New Dishwasher</video:title>
      <video:description>Align the P-trap with the newly installed discharge elbow on the disposal. Make sure the gasket is properly seated and hand-tighten the slip nut to create a secure, water-tight connection. Next, slide the dishwasher drain hose onto the dishwasher inlet port on the side of the disposal and tighten the hose clamp with a screwdriver to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N4Uv6vGHmuI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6873-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pi9AP8U2_qQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Checks and Leak Test — How to Install a New Dishwasher</video:title>
      <video:description>With all connections made, slowly turn the water back on at both the hot and cold shut-off valves. Turn on the faucet and let the water run for a minute. As the water runs, thoroughly inspect all the new connections underneath the sink—including the supply lines at the valves and the faucet, and the entire drain and P-trap assembly—for any signs of leaks or drips. If any leaks are found, turn off the water and tighten the leaking connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pi9AP8U2_qQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6873-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1Lmj2XH33xM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Test — How to Install a New Dishwasher</video:title>
      <video:description>Slowly turn both water shut-off valves counter-clockwise to turn the water back on. Use a flashlight to inspect all new connections under the sink for any signs of leaks. Once confirmed that there are no leaks below, turn the faucet handle on top to test both hot and cold water flow. Check the connections one more time while the water is running. If everything is dry, the installation is successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1Lmj2XH33xM</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6873-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WHVNA06HSO8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Checks and Testing — How to Install a New Dishwasher</video:title>
      <video:description>With all connections made and tightened, plug the power cord into the electrical outlet. Turn on the cold water at the faucet. Turn on the garbage disposal switch. While the water and disposal are running, thoroughly inspect all connection points for leaks: the sink mount, the dishwasher hose connection, and the drainpipe connections. Once confirmed there are no leaks, the installation is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WHVNA06HSO8</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6874-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uHtaAyK_mAY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing — How to Install a New Dishwasher</video:title>
      <video:description>Before removing the disposal unit, you must first disconnect all associated plumbing. Start by loosening the nuts on the main PVC drain pipe that connects to the side of the disposal. These are often hand-tight slip nuts, but the screws on the flange connecting the pipe to the disposal may require a screwdriver. Also, locate the flexible drain hose from the dishwasher, which is typically attached with a metal compression clamp. Use a screwdriver to loosen this clamp and pull the hose off the disposal&apos;s inlet port. It&apos;s wise to have a bucket underneath to catch any trapped water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uHtaAyK_mAY</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6874-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s4Il8Rrg8Bk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing Hoses and Pipes — How to Install a New Dishwasher</video:title>
      <video:description>If a dishwasher drain hose is attached to the disposal, use a screwdriver to loosen the hose clamp. Once loose, pull the hose off the disposal&apos;s inlet port. Next, locate the main drain pipe connected to the side of the disposal. Unscrew the slip nut connecting the pipe to the drain assembly. This can typically be done by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s4Il8Rrg8Bk</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6874-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N4Uv6vGHmuI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing — How to Install a New Dishwasher</video:title>
      <video:description>Begin by placing a bucket directly under the P-trap to catch water. Using your hands, unscrew the slip nut that connects the drain pipe (P-trap) to the garbage disposal&apos;s discharge elbow. Pull the pipe away and allow any trapped water to drain into the bucket. Next, use a screwdriver to loosen the hose clamp on the dishwasher drain line and pull the hose off the disposal&apos;s inlet port.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N4Uv6vGHmuI</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6877-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y47Pq0uxtQ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect New Supply Line — How to Install a New Dishwasher</video:title>
      <video:description>Attach the new braided stainless steel supply line to the outlet port on the new angle stop valve. Hand-tighten the connector nut, then use pliers to give it a final snug quarter-turn. Finally, wipe down the entire valve and connection with a clean paper towel to ensure it&apos;s dry, which will make it easier to spot any leaks after turning the water back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y47Pq0uxtQ8</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6877-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iFXVzgfLnZ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Brass Tee — How to Install a New Dishwasher</video:title>
      <video:description>Locate the cold water shutoff valve under the sink and turn it to the &apos;off&apos; position. Using an adjustable wrench, carefully loosen and disconnect the flexible cold water hose from the shutoff valve. Attach the supplied brass tee fitting by hand-threading it onto the shutoff valve, then use the adjustable wrench to tighten it securely. Finally, reattach the flexible cold water hose to the top of the newly installed brass tee and tighten it with the wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iFXVzgfLnZ0</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6877-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/T-rZy5CcNfw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Water Supply — How to Install a New Dishwasher</video:title>
      <video:description>Begin by shutting off the hot and cold water supply using the shutoff valves located under the sink. Place a bucket underneath to catch any water. Use an adjustable wrench to carefully unscrew the nuts connecting the braided supply lines to the shutoff valves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/T-rZy5CcNfw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6875-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t7dEkdHjR84/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install High Drain Loop — How to Install a New Dishwasher</video:title>
      <video:description>To install a high drain loop, obtain a drain hose bracket and a screw. Place the dishwasher&apos;s drain hose into the bracket. Position the bracket against the underside of the countertop, ensuring the top of the hose loop is at least 32 inches from the floor. Use a screwdriver to fasten the bracket to the countertop with the screw. Be careful not to screw through the hose itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t7dEkdHjR84</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6875-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fnYnHO3Ktp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Dishwasher from Cabinet — How to Install a New Dishwasher</video:title>
      <video:description>The dishwasher is secured to the countertop or adjacent cabinets with mounting brackets. Locate these brackets, usually at the top or sides of the dishwasher opening, and remove the screws holding them in place. Once the screws are removed, carefully slide the old dishwasher straight out of the cabinet space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fnYnHO3Ktp0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6875-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ybkq-_ySjhk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Remove the Dishwasher — How to Install a New Dishwasher</video:title>
      <video:description>Before starting the installation, first unplug the dishwasher and the garbage disposal from the electrical outlet under the sink. Turn off the water supply valve for the dishwasher. To remove the dishwasher, open the door and locate the screws securing it to the underside of the countertop. In this case, since it&apos;s a granite countertop, the dishwasher is secured to a metal support beam with screws. Unscrew these screws. Once the screws are removed, the dishwasher can be carefully pulled out from under the counter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ybkq-_ySjhk</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6876-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9YJWPh1jw10/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect and Secure the Drain Hose — How to Install a New Dishwasher</video:title>
      <video:description>Slide a hose clamp over the end of the dishwasher drain hose. Push the rubber fitting of the hose firmly onto the garbage disposal&apos;s drain inlet. Position the hose clamp over the connection point and tighten it securely with a screwdriver or nut driver. Ensure the clamp is tight enough to prevent any leaks when the dishwasher drains under pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9YJWPh1jw10</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6876-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LsrVpuGHIJQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect the Drain Hose — How to Install a New Dishwasher</video:title>
      <video:description>With the inlet now clear, slide the dishwasher drain hose back onto the garbage disposal&apos;s inlet port. Ensure it is pushed on securely. Reposition the metal hose clamp over the connection point and tighten it firmly with the screwdriver to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LsrVpuGHIJQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6876-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BQXa1i7Wy_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Drain Hose Configuration — How to Install a New Dishwasher</video:title>
      <video:description>Examine the dishwasher drain hose under the sink. If the hose connects directly to the garbage disposal without first looping up towards the underside of the countertop, it is installed incorrectly and can allow dirty sink water to back up into the dishwasher. The solution is to create this &apos;high loop&apos;.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BQXa1i7Wy_E</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6878-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fnYnHO3Ktp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Slide in New Dishwasher — How to Install a New Dishwasher</video:title>
      <video:description>Carefully stand the dishwasher upright. Feed the drain hose, water supply line, and electrical cable through the hole in the side of the cabinet that leads under the sink. Gently slide the dishwasher into the cabinet space, being careful not to kink or pinch any of the lines. Adjust the leveling legs on the front of the dishwasher as needed to ensure it is level and fits snugly under the countertop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fnYnHO3Ktp0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6878-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fnYnHO3Ktp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unbox and Prepare New Dishwasher — How to Install a New Dishwasher</video:title>
      <video:description>Unbox the new dishwasher and prepare it for installation. Lay it on its back on a piece of cardboard or the packaging foam to protect the floor. Remove any lower access panels or trim pieces needed to access the electrical junction box and water inlet valve. In this case, a black trim piece is unscrewed and removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fnYnHO3Ktp0</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6878-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q4n39CiBTPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Plumbing — How to Install a New Dishwasher</video:title>
      <video:description>The first step is to disconnect the plumbing from the old garbage disposal. Use a screwdriver to loosen the hose clamp securing the dishwasher discharge line to the disposal inlet. Twist and pull the hose to detach it. Next, use the screwdriver to loosen the two screws holding the main discharge pipe flange to the side of the disposal. Once the screws are removed, the flange and the drain pipe can be pulled away from the unit. Be prepared for some water to spill out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q4n39CiBTPI</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6880-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7HwF9hw2FqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Slide Dishwasher Out — How to Install a New Dishwasher</video:title>
      <video:description>With all connections severed, gently grip the dishwasher on the top and bottom. Slowly and carefully pull the dishwasher straight out of the cabinet opening. As you pull, check behind and underneath to ensure the disconnected hoses and wires do not get caught or snagged on anything. Once the dishwasher is clear, guide the hoses fully out of the opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7HwF9hw2FqU</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6880-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZdH-EGHWW8M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Slide Dishwasher Out of Cavity — How to Install a New Dishwasher</video:title>
      <video:description>With all connections severed, begin to carefully slide the dishwasher out of its cavity. Pull gently and evenly. To avoid scratching the floor, you can brace the bottom edge with your foot to slightly lift the front as you pull. As the dishwasher comes out, simultaneously pull the slack from the electrical wire, water line, and drain hose through the hole in the cabinet to prevent them from snagging.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZdH-EGHWW8M</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6880-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N4Uv6vGHmuI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Plumbing — How to Install a New Dishwasher</video:title>
      <video:description>Align the P-trap with the newly installed discharge elbow on the disposal. Make sure the gasket is properly seated and hand-tighten the slip nut to create a secure, water-tight connection. Next, slide the dishwasher drain hose onto the dishwasher inlet port on the side of the disposal and tighten the hose clamp with a screwdriver to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N4Uv6vGHmuI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6847-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Yv8VGeCFwIc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Seals, Springs, and O-Rings — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Using a small screwdriver or a dental pick, reach into the two holes inside the faucet body and carefully pull out the old rubber seats and the springs underneath them. Next, lift the entire spout assembly straight up and off the faucet body. Using needle-nose pliers, grab and remove the two old O-rings from the base of the faucet body. Wipe the area clean with a rag to remove any debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Yv8VGeCFwIc</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6847-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eog9Xa2fD6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Worn Internal Parts — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>First, lift the metal faucet ball straight out of the faucet body. Next, use a flathead screwdriver to carefully reach inside the faucet body and pry out the two small rubber seats and the metal springs that sit beneath them. These are the primary parts that wear out and cause leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eog9Xa2fD6c</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6847-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cs99iv0jhv0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Cartridge, Seat, and Spring — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>With the cap removed, grasp the faucet cartridge and lift it straight up and out of the faucet body. If it&apos;s stuck, you can use a screwdriver to gently pry it upwards. Once the cartridge is out, look down into the faucet body. You will see a small rubber seat, which may also be called a washer, and a spring underneath it. Use a narrow-tipped screwdriver or a pick to hook and remove the old rubber seat, followed by the spring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cs99iv0jhv0</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6849-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1CP0d4bp7gk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Faucet — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Reinstall the faucet components in reverse order. First, push the plastic cartridge back into the valve body, making sure to align the notches on the side of the cartridge with the corresponding slots in the valve body. Screw the bonnet nut back on hand-tight, then give it a final snug turn with the channel-lock pliers. Slide the metal collar and faceplate back on, securing the faceplate with its two screws. Finally, place the handle back on the stem—ensuring the plastic adapter is oriented correctly for proper handle motion—and tighten the handle screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1CP0d4bp7gk</video:player_loc>
      <video:duration>113</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6849-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sr0FJIIOFnw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Faucet — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Begin reassembling the faucet in the reverse order of disassembly. Place the chrome sleeve back over the new cartridge. Position the escutcheon plate against the wall, aligning the screw holes, and secure it with the two long screws. Tighten the screws evenly, but do not overtighten. Place the white plastic temperature adapter onto the cartridge stem, followed by the main handle. Secure the handle with the center screw using the Phillips screwdriver. Finally, snap the decorative cap back into place on the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sr0FJIIOFnw</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6849-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r1IJFzxXdDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Rod Assembly and Reassemble Faucet — How to Fix a Leaky Single-Handle Faucet (Ball-Valve</video:title>
      <video:description>Insert the newly repaired rod assembly back into the faucet body. Push it all the way in. Temporarily place the handle on the rod and turn it clockwise to engage the threads at the back of the faucet, continuing until the faucet is in the &apos;off&apos; position. Remove the handle. Now, slide the new packing washer onto the rod, with the flat side facing outwards. Follow this with the new black rubber packing, pressing it into the faucet body. Thread the packing nut on and lightly tighten it with an adjustable wrench. Finally, place the handle back on and secure it with the handle screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r1IJFzxXdDQ</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6850-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J8jb6MYGlr4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen the Handle Set Screw — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Identify the specific faucet handle that needs repair. Locate the small set screw, which is typically found on the underside of the handle. Select the correct size Allen wrench from a set that fits snugly into the screw head. Insert the Allen wrench and turn it counter-clockwise to loosen the screw. You only need to loosen it enough to allow the handle to be removed; it is not necessary to take the screw out completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J8jb6MYGlr4</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6850-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h7UDJlTmOy4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle and Cap — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Locate the small set screw on the base of the faucet handle, usually on the back. Use a 3/32 inch Allen key to turn the screw counter-clockwise, loosening it enough to remove the handle. You do not need to remove the screw completely. Lift the handle straight up and off the valve stem. Once the handle is off, unscrew the chrome decorative cap by hand to expose the cartridge retaining nut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h7UDJlTmOy4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6850-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d3DCdu5nw_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Faucet Handle — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>First, ensure the water supply to the sink is turned off. Locate the small set screw on the faucet handle. Using the correct size hex key, also known as an Allen wrench, turn the screw counter-clockwise to loosen and remove it. Once the screw is out, you can lift the handle straight up and off the faucet&apos;s body to expose the internal components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d3DCdu5nw_w</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6848-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RijI0q1XPTs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Spout — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>With the handle removed, unscrew the chrome trim cap by twisting it counter-clockwise by hand. Once unscrewed, lift it off the faucet body. Then, pull the sprayer head out from the spout a few inches to provide slack for the hose. Gently wiggle and pull the entire faucet spout straight up to remove it from the base, exposing the O-rings and swivel mechanism.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RijI0q1XPTs</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6848-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m5ksfEtkep0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Retaining Nut and Old Cartridge — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>With the handle removed, use channel-lock pliers or an adjustable wrench to grip the brass retaining nut that secures the cartridge. Turn the nut counter-clockwise to unscrew and remove it. Next, grip the top of the white plastic cartridge with the pliers and pull it straight up and out of the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m5ksfEtkep0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6848-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LHg2XC3xhIg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Valve Cartridge — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>With the handle removed, you can now see the valve cartridge. Use a pair of locking pliers or an adjustable wrench to grip the large retaining nut that holds the cartridge in place. Turn the nut counter-clockwise to loosen and remove it. After the nut is off, you can pull the entire cartridge assembly straight up and out of the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LHg2XC3xhIg</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6846-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H3j1FSrcwmk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>The first critical step is to prevent water from flooding the bathroom. Locate the two shut-off valves, one for hot water and one for cold water, which are typically found on the wall or floor behind the pedestal. Turn the handles clockwise until they are fully closed to stop the flow of water to the faucet. If these valves do not work or are inaccessible, you will need to shut off the main water supply to the entire house.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H3j1FSrcwmk</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6846-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ajz8bqVxq8Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Repair — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Before working on the faucet, locate the hot and cold water supply shutoff valves under the sink. Turn both valve handles clockwise until they are fully closed. Place a towel on the cabinet floor beneath the plumbing to absorb any water that may spill during the repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ajz8bqVxq8Q</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6846-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lON1WPmrka4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Locate the hot and cold water shut-off valves under the kitchen sink. Turn the handles clockwise until they are fully closed to stop the flow of water to the faucet. This is a critical safety step to prevent flooding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lON1WPmrka4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6851-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JYADxcN4Sh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test Faucet — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Thread the retaining nut back onto the faucet body and hand-tighten it. Use the adjustable wrench to give it a final snug turn, but be careful not to overtighten. Place the handle back on the cartridge stem, aligning it correctly. Insert the Allen key and tighten the set screw to secure the handle. Turn the water supply valve back on by turning it counter-clockwise. Check for any leaks and test the faucet&apos;s operation. The drip should now be gone.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JYADxcN4Sh4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6851-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yuMqVFD5Akw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Water On and Test — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Go back under the sink and turn the water supply valves back on by turning them counter-clockwise. Return to the faucet and operate the handle to check for any leaks around the handle or base and ensure proper water flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yuMqVFD5Akw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6851-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cP_KCmfsqvk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test Faucet — How to Fix a Leaky Single-Handle Faucet (Ball-Valve Type)</video:title>
      <video:description>Align the spout and push it firmly back into the faucet body. You should feel it seat properly. Once in place, use the Allen key to tighten the grub screw clockwise until it is snug, securing the spout. Turn the water supply back on and test the faucet by turning on the water and swiveling the spout left and right. Check carefully for any leaks around the base. The repair is complete when no water leaks out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cP_KCmfsqvk</video:player_loc>
      <video:duration>117</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6843-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R4KJmWUZcrs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Tape to Pipe Threads — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>Take the screwdriver with the pre-wrapped tape and bring it to the threaded pipe fitting. Hold the loose end of the tape against the threads and begin wrapping it around the fitting in a clockwise direction. Use the screwdriver to guide the tape smoothly onto the threads. Continue wrapping for three to five full rotations to ensure a proper seal. Once done, tear the tape cleanly from the portion still on the screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R4KJmWUZcrs</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6843-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V9oixkb3xts/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Layer of Tape — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>For a more robust seal, particularly on larger fittings like the 1-inch fitting shown, apply a second layer of tape. Add another 6 to 8 wraps of tape directly over the first layer, again maintaining a clockwise direction and keeping the tape taut. The goal is to achieve a total of 12 to 15 wraps for a 1-inch fitting. Press the tape down into the threads with your finger to help it conform to the shape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V9oixkb3xts</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6843-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AlwKlAEuS98/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Start Wrapping Tape Clockwise — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>To correctly apply the tape, start by placing the end of the tape on the male threads of the fitting. Hold it firmly in place with your thumb. Begin to wrap the tape around the threads in a clockwise direction. This is crucial because it&apos;s the same direction you will turn the fitting to tighten it, which prevents the tape from unraveling during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AlwKlAEuS98</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6842-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HR6N3O-YXOQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wrap the Fitting with Thread Sealing Tape — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>This step covers the correct method for applying thread sealing tape. First, ensure you wrap the tape in a clockwise direction, which is the same direction that the fitting will be tightened. This prevents the tape from bunching up or unraveling during installation. The key technique shown is to flip the tape roll over so the tape comes off the top. As you wrap it clockwise around the fitting&apos;s male threads, the roll itself will want to wind tighter, keeping tension on the tape. This results in a very neat and snug wrap. Manually allow the tape to unspool as you make several passes around the threads. After 3-5 wraps, pull the tape sharply to snap it off the roll. The result is a clean, tight seal that won&apos;t unravel when you connect the fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HR6N3O-YXOQ</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6842-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R4KJmWUZcrs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Tape to Pipe Threads — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>Take the screwdriver with the pre-wrapped tape and bring it to the threaded pipe fitting. Hold the loose end of the tape against the threads and begin wrapping it around the fitting in a clockwise direction. Use the screwdriver to guide the tape smoothly onto the threads. Continue wrapping for three to five full rotations to ensure a proper seal. Once done, tear the tape cleanly from the portion still on the screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R4KJmWUZcrs</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6842-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XjUFjbfQqzU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Threads — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>To ensure a leak-proof connection, the threads on the male adapter must be properly sealed. First, take a roll of Teflon tape (thread seal tape) and wrap it around the threads in a clockwise direction. Apply about 3-4 full wraps, ensuring the tape lies flat in the threads. Wrapping clockwise prevents the tape from unraveling when you screw on the spout. For an extra layer of protection, apply a small amount of pipe sealant (pipe dope) over the Teflon tape, spreading it evenly around the threads with your finger.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XjUFjbfQqzU</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6844-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/26rhp9dj8MM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Teflon Tape — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>Take a roll of new Teflon tape. Holding the end of the tape against the shower arm, begin wrapping it in a clockwise direction around the threads. Overlap each pass by about half the width of the tape. Continue wrapping for three to five full rotations to build up a sufficient layer for sealing. Once complete, tear the tape from the roll.</video:description>
      <video:player_loc>https://www.youtube.com/embed/26rhp9dj8MM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6844-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qRhRK0LWDLs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Thread Tape — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>Take the new roll of thread tape and wrap it tightly around the threads of the shower arm. It is important to wrap the tape in a clockwise direction, which is the same direction you will turn the showerhead to tighten it. This prevents the tape from bunching up or unraveling during installation. Wrap the tape around the threads 3 to 5 times for a good seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qRhRK0LWDLs</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6844-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YIRdcwDkpKU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Thread Seal Tape — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>To ensure a leak-proof connection, wrap the threads of the shower arm with thread seal tape, also known as Teflon tape. Wrap the tape around the threads in a clockwise direction 3-4 times, ensuring it&apos;s smooth and covers all the threads. Cut the tape when you&apos;re done.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YIRdcwDkpKU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6845-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C4cKDlDg-U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hand-Tighten Fittings — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>After applying thread compound to the male threads of the pipe, begin assembling the connection. Take the corresponding female fitting and screw it onto the pipe by hand. Tighten it as much as you can manually. This initial hand-tightening ensures the threads are properly aligned before applying the force of a wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C4cKDlDg-U</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6845-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vMLa4-yGygk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the Connection — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>Hand-thread the fitting onto the pipe. The sealant&apos;s lubricating properties will make it easier to screw the components together. Tighten the connection until it is snug. This method avoids the risk of over-tightening and cracking fittings, which can sometimes occur with tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vMLa4-yGygk</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6845-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UH_czkW29RI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Gasket and Reassemble the Fitting — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>Carefully place the twisted Teflon tape ring inside the female part of the union fitting. Ensure it is seated evenly in the groove where a gasket would normally sit. Align the two halves of the pipe and hand-tighten the union collar. Make sure the threads are properly engaged to avoid cross-threading.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UH_czkW29RI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6841-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qSmc0lbCFp8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Thread Sealant Tape — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>Prepare the pipe for the new valve. Clean any old tape or debris from the male threads of the pipe. Wrap new thread sealant tape (Teflon tape) around the threads of all male fittings that will be connected. Wrap the tape 4-5 times in a clockwise direction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qSmc0lbCFp8</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6841-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2FdZwXAhFXI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Threaded Brass Fitting — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>Prepare the new threaded brass nipple by applying both thread sealant tape and pipe dope to the threads. Hand-thread the new nipple into the existing steel pipe fitting. Use channel-lock pliers to tighten the nipple securely, ensuring it&apos;s as tight as possible to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2FdZwXAhFXI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6841-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JoeGbDSf3Bw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Blue Monster Tape — How to Properly Apply Thread Seal Tape (Teflon Tape)</video:title>
      <video:description>Start by cleaning the surface of the pipe where the leak is. Remove any dirt, rust, or debris that might prevent the tape from adhering properly. If there are any sharp edges on the pipe, file them smooth. Pull off the backing of the tape, stretch it slightly and wrap it on the pipe with half its width overlapping the wrap to create a tight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JoeGbDSf3Bw</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6794-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rNsLXhcSESU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Cast Iron Pipe — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>The first step is to remove the damaged section of the cast iron pipe. Using a reciprocating saw equipped with a Milwaukee &apos;The Wrecker&apos; blade, carefully make two cuts through the pipe to isolate the section that needs to be replaced. Ensure you have enough space to work and a clear cutting path.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rNsLXhcSESU</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6794-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GY4K0cyj7Fc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>Before starting, place a bucket and several old towels or rags directly under the sink&apos;s P-trap (the U-shaped pipe). This will catch water and any debris that will spill out when you disconnect the pipes. This step is crucial for keeping your work area clean and dry.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GY4K0cyj7Fc</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6794-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PXytjeQjNfs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Out Damaged Pipe Section — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>First, protect the lower drain by plugging the openings with rags and plastic to catch debris. Using a reciprocating saw equipped with a specialty blade for cutting cast iron, make a straight cut through the upper section of the pipe, above the damaged area. Then, cut through the lower section of the main 4-inch stack and the connected 2-inch vent pipe to completely remove the broken piece. To ensure a straight cut on the lower section, a piece of wood can be braced across the opening to serve as a guide for the saw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PXytjeQjNfs</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6800-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kzDNzWGJnuw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten fitting — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>Use two spanners/wrenches to fully tighten the fitting onto the copper pipe. Tighten the compression nut onto the fitting using one spanner. Use another spanner on the other nut on the fitting, if there is one, to hold it securely. If there isn&apos;t a nut to tighten against, place the second spanner on the hex-shaped flats of the fitting itself. Ensure that the second spanner is positioned to apply pressure against rotation of the first spanner.  Tighten the nut just enough to feel pressure and resistance. Do not overtighten. You can test for leaks once the water is turned on and tighten slightly if a small leak is detected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kzDNzWGJnuw</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6800-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DeuxJfDQGSc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Drain Nut — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>With the drain hand-tightened, use a pair of channel-lock pliers or a pipe wrench to give the mounting nut a final tightening. A quarter to a half turn past hand-tight is usually sufficient. Be cautious not to over-tighten, as this can crack the plastic nut or the drain body. As you tighten, excess plumber&apos;s putty will squeeze out around the drain flange inside the sink. This is normal and indicates a good seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DeuxJfDQGSc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6800-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fIaL7rwLBSY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Leaks and Final Adjustments — How to Replace a Cracked Section of Cast Iron Drain Pipe wit</video:title>
      <video:description>A warning is given to be careful not to overtighten, as this could crack the porcelain or damage the nuts. After tightening, turn the water supply back on and allow the tank to fill completely with water. Carefully inspect the area around each of the three bolts for any signs of leaking. If a leak is present, use the socket wrench to tighten the leaking bolt in small, quarter-turn increments until the dripping stops.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fIaL7rwLBSY</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6799-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BYRqtOP98LA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Remove Old Pipe — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>Using a reciprocating saw equipped with a metal-cutting blade, carefully cut through the existing cast iron pipe just below the hub where the old lead bend begins. Once the cut is complete, pry and lift the old lead bend and flange section away to remove it from the drain system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BYRqtOP98LA</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6799-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NkiLXXSOSIw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Cutting — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>Prepare to cut the existing cast iron sewer pipe by selecting the correct tool and blade. A reciprocating saw equipped with a diamond-tipped blade is necessary for cutting through thick cast iron. Ensure the blade is specifically designed for this purpose to achieve a clean, straight cut. Before starting, turn off the main water supply to the house and inform all occupants not to use any drains.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NkiLXXSOSIw</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6799-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gcV75TESL4E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Old Pipe — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>Using a reciprocating saw equipped with a heavy-metal cutting blade, carefully cut through the existing old drain pipe. Maintain a firm grip on the saw and try to make the cut as straight and square as possible. This will ensure a better fit for the new coupling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gcV75TESL4E</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6795-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AIrQXU00N9s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Drain Pipe — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>After removing the old flange, clean the inside of the cast iron drain pipe. Use a grinding wheel or a flap disc on the angle grinder to smooth any rough edges on the inside of the pipe where the new flange will seal. Vacuum out all debris from the pipe and the surrounding area. Stuff a clean rag back into the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AIrQXU00N9s</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6795-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PTgojsPulCQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Position Pipes and Coupling — How to Replace a Cracked Section of Cast Iron Drain Pipe w</video:title>
      <video:description>Although not shown in action, the next step is to prepare the pipes. Ensure the ends of both the cast iron pipe and the ABS pipe are cut squarely. The ends must be clean and smooth. Any burrs or rough edges must be removed with a file or deburring tool. Slide the entire coupling assembly (gasket and shield) onto one pipe. Bring the end of the second pipe to butt up against the first. Finally, roll the rubber sleeve of the coupling over the joint so it&apos;s centered, and then position the metal shield over the rubber sleeve.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PTgojsPulCQ</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6795-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ut30zuuS_mM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Smooth Pipe Edges — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>After cutting the new pipe, use a piece of sandpaper to smooth the rough edges. Sand both the outside and inside of the cut end to remove any burrs. This process, known as deburring, ensures a snug fit into the rubber coupling and prevents debris from catching on the pipe&apos;s edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ut30zuuS_mM</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6797-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rzTXjXHWwV0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Assembly and Secure Couplings — How to Replace a Cracked Section of Cast Iron Drain Pipe</video:title>
      <video:description>After allowing the PVC cement to set briefly, install the completed assembly into the gap. Slide the rubber couplings into position over the joints between the cast iron and PVC. Use a nut driver or socket wrench to firmly tighten the metal clamps on each coupling. Ensure the clamps are snug to create a watertight seal. Finally, install a metal support strap around the new PVC section and secure it to the floor joists above to support the pipe&apos;s weight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rzTXjXHWwV0</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6797-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vB_nhtUe4OU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Pipes to the Block — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>With the support block in place, use copper pipe clips to secure the pipes. Place a clip around each of the three pipes (hot, cold, and shower riser) and fasten them to the wooden block using screws and a drill. This will firmly anchor the entire valve assembly, preventing any movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vB_nhtUe4OU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6797-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N1w3DXdn3sk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Pipes with Clamps — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>Secure the assembled copper pipes to a support bracket using pipe clamps. Place the clamps around the pipes and tighten them with pliers to hold the entire assembly firmly in place. This prevents movement during the soldering process and provides long-term support for the pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N1w3DXdn3sk</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6798-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UxiCtJersJs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New PVC Fitting and Couplings — How to Replace a Cracked Section of Cast Iron Drain Pipe wit</video:title>
      <video:description>Slide a shielded mechanical coupling onto the bottom cut edge of the cast iron pipe. Position the new PVC double T-fitting into the gap. Then, slide another shielded mechanical coupling over the top edge of the cast iron pipe, connecting it to the new fitting. Ensure both couplings are properly seated over the joints, creating a bridge between the old cast iron pipe and the new PVC fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UxiCtJersJs</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6798-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4t8uCa7a2Oc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create the PVC Patch — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>Take a new PVC coupling that is the same diameter as the pipe. Using a hacksaw or PVC cutter, cut the coupling lengthwise, removing approximately 40% of its circumference to create a C-shaped patch. If the coupling has a small ridge or &apos;stop&apos; on the inside, file or sand it down so the patch can slide smoothly along the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4t8uCa7a2Oc</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6798-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cSI_bB9jmM8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Rubber Sleeve — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>To install the coupling, first separate the metal shield from the rubber sleeve. A helpful technique is to slide the rubber sleeve onto the end of the new PVC pipe first, pushing it until it meets the internal rubber stop. Then, carefully work the other end of the sleeve over the cut end of the cast iron pipe. This can be a tight fit. Wiggle and push the sleeve until it is fully seated on both pipes, ensuring the ends of both pipes are butted up against the internal stop for proper alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cSI_bB9jmM8</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6796-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9yKUyXt-Vns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solvent Weld PVC and Install Final Connection — How to Replace a Cracked Section of Cast Iron Drain </video:title>
      <video:description>After confirming the fit, disassemble the PVC parts. For each connection, apply PVC primer (the purple fluid) to the outside of the pipe end and the inside of the fitting socket. Immediately follow with a layer of PVC cement over the primed areas. Firmly push the pipe into the fitting, giving it a quarter-turn twist to ensure even distribution of the cement, and hold for about 30 seconds. To connect the new PVC system to the old metal pipe, use a flexible rubber coupling. Slide the coupling over both pipe ends and securely tighten the metal band clamps with a screwdriver or nut driver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9yKUyXt-Vns</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6796-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/P4l_Fl93ziQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten the Coupling — How to Replace a Cracked Section of Cast Iron Drain Pipe with PVC</video:title>
      <video:description>Slide the Fernco coupling over the end of the sealed galvanized pipe. Ensure it is pushed on far enough to be properly seated. Then, insert the new PVC pipe into the other end of the coupling. Once both pipes are seated correctly inside the coupling, use a screwdriver or nut driver to tighten the metal clamps on both sides. Tighten them firmly to compress the rubber and create a secure, watertight joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/P4l_Fl93ziQ</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6796-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rzTXjXHWwV0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit and Measure for New Pipes — How to Replace a Cracked Section of Cast Iron Drain Pipe with PV</video:title>
      <video:description>After removing the old pipe, dry-fit the new components. Slide the rubber transition couplings onto the ends of the existing cast iron pipes. Insert the new PVC Y-fitting and any straight pipe sections needed to fill the gap. Use a tape measure to determine the precise length of the final PVC pipe pieces needed for the assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rzTXjXHWwV0</video:player_loc>
      <video:duration>149</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6779-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PaMasBhANcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the New Faucet — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Unpack the new faucet and its components from the box. Take the flexible hot and cold water supply lines and hand-thread them into the corresponding ports on the base of the faucet. Next, slide the rubber base gasket over the supply lines and seat it firmly against the faucet base. Take the threaded mounting stud from the hardware bag, insert it into its hole on the faucet base, and use a screwdriver to tighten it until it is secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PaMasBhANcM</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6779-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mjQfCbv-UDk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Dedicated Faucet — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Assemble the faucet mounting hardware and install it on the sink. First, place the faucet base through the hole from the top. From underneath the sink, slide the rubber gasket, followed by the gold-plated metal washer, onto the faucet&apos;s threaded pipe. Secure everything in place by hand-tightening the large plastic nut. Finally, insert the faucet spout into the base from the top and tighten it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mjQfCbv-UDk</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6779-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tiG0ZQ7-D3s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-assemble Faucet and Water Lines — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Before installing the faucet, perform some pre-assembly. Slide the gooseneck spout into the main faucet base. Next, connect the braided hot and cold water supply lines to the corresponding inlets on the faucet&apos;s base. Screw them on by hand until they are snug, then use a pair of pliers to give them a slight final turn to ensure a tight seal. Do not over-tighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tiG0ZQ7-D3s</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6783-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9o0oyK9iCq4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Install Thermostatic Valve — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Prepare the thermostatic sensor valve for installation. Connect the new braided hoses to the &apos;Hot In&apos; and &apos;Cold In&apos; ports on the sides of the valve. Attach the faucet&apos;s original supply lines to the &apos;Hot Out&apos; and &apos;Cold Out&apos; ports on the top of the valve. Mount the valve to the wall or cabinet side using the provided screws. Finally, connect the new hoses from the valve&apos;s &apos;In&apos; ports to the corresponding hot and cold water shut-off valves on the wall. Turn the water back on slowly and carefully inspect all four connection points for any leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9o0oyK9iCq4</video:player_loc>
      <video:duration>97</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6783-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RnAk0J0u15M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Faucet Components — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Prepare the faucet for installation. First, take the threaded pipe and screw it into the base of the faucet body by hand until it is snug. Next, identify the hot and cold waterlines (often marked with red and blue indicators). Insert the connector ends of the waterlines into their respective ports at the base of the faucet. They should click or slide securely into place. The hot line typically connects to the left port and the cold to the right. Finally, place the O-ring over the threaded pipe and ensure it is seated firmly in the groove at the very bottom of the faucet base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RnAk0J0u15M</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6783-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V4vCWNqvH1o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount New Valve Body — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Unbox the new faucet assembly and lay out all the parts. Prepare the new valve bodies for installation by placing the necessary washers and threading on the mounting nuts. Insert the new valve bodies down through the holes in the tub deck and hand-tighten the nuts from underneath through the access panel. Apply plumber&apos;s putty or silicone sealant under the faucet flanges before final tightening to create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V4vCWNqvH1o</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6775-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ojzCJg-Iw6g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Begin by turning off both the hot and cold water supply valves, typically located under the sink. Lift the faucet handle to release any residual water pressure in the lines. Cover the sink drain with a piece of tape to prevent any small parts from falling into it during the repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ojzCJg-Iw6g</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6775-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/je6_S2wjJik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Shutting Off Water — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>The first and most critical step is to prepare the area and shut off the water. Locate the hot and cold water shutoff valves, typically found beneath the sink coming out of the wall. Turn both valves clockwise until they are fully closed. To ensure the water is completely off, open both the hot and cold taps on the faucet. No water should flow out. Place a small bucket or container directly under the P-trap to catch any water that will drain out in the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/je6_S2wjJik</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6775-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yQjJ6QVX344/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Under-Sink Plumbing — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Prepare the existing plumbing under the sink for the modification. The most critical part of this step is to shut off the main water supply to your house. Once the water is off, open the cold water tap on the sink to relieve any pressure and drain remaining water from the line. Place your towel under the cold water shut-off valve. Using an adjustable wrench, carefully loosen and remove the existing flexible supply line that connects the shut-off valve to the sink&apos;s faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yQjJ6QVX344</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6782-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JeZwva0XYKU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Test for Leaks — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Slowly turn both the hot and cold water shut-off valves back on by turning them counter-clockwise. Go to the top of the sink and turn the faucet handle on to test the flow of water. While the water is running, use a flashlight and a dry paper towel to thoroughly inspect all new connections underneath the sink—including the supply lines at the valves and the faucet, and the entire drain assembly—for any signs of dripping or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JeZwva0XYKU</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6782-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QmCbcwkVDpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Return to the main water shut-off and turn it back on slowly. Go back to the sink and carefully inspect the new valve connection for any signs of leaking. If the connection is dry, open the new valve by turning its handle counter-clockwise. Finally, turn on the faucet and check the supply line connection and the valve itself one last time for any drips. If everything is dry, the job is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QmCbcwkVDpQ</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6782-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KguLfUVFXqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Testing the Installation — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Slowly turn the water back on at both the hot and cold shut-off valves. Carefully inspect all connection points—at the base of the faucet and at the shut-off valves—for any signs of leaks. Use a flashlight and a dry paper towel to help spot drips. Once you&apos;ve confirmed there are no leaks, turn the faucet handle to test both hot and cold water flow and check that the faucet operates smoothly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KguLfUVFXqU</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6780-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CIcqUVvs79I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Trim Kit — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>With the system confirmed to be leak-free, proceed with installing the new trim kit. Install the new tub spout, slide the valve sleeve over the cartridge, and mount the decorative escutcheon plate. Attach the new handle and secure it. Finally, install the new shower arm and shower head to complete the project.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CIcqUVvs79I</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6780-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/60MubnmlrIQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Trim Plate and Controls — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>After confirming there are no leaks, install the finished wall surface, such as tile. Once the tiling is complete, cut the protective plastic box of the valve so that its edge is flush with the face of the tile. Install the valve control plate and knobs. The protrusion of the diverter buttons can be adjusted to match the depth of your wall. Use an Allen key to tighten the set screw on the main temperature control knob to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/60MubnmlrIQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6780-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NLM5SaKFY3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Assembly and Trim Installation — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Begin final assembly by installing the remodeling cover plate. Insert the mounting bracket behind the tile wall and attach the plate to it with the provided screws, ensuring it&apos;s centered and snug. Next, install the Moen cartridge into the valve body. Slide on the escutcheon sleeve, then the main escutcheon trim plate, and secure it with its screws. Attach the handle and secure it. Finally, install the new tub spout onto the lower pipe. The project is complete, leaving a modern and functional new shower faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NLM5SaKFY3g</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6776-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AtLMlUwVcdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Disassembly — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Begin by shutting off the main water supply. Then, remove all fixtures from the shower wall, including the grab bar, faucet handle, escutcheon plate, and shower curtain rod. This may require a drill or screwdriver. Carefully cut any existing sealant around the shower panel with a utility knife and pry the panel off the wall to expose the drywall behind it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AtLMlUwVcdE</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6776-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rkX7O-lLVwU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Removing Tub Screws and Front Panel — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>With the surround panels removed, the screws securing the tub flange to the wall studs are taken out. The decorative front panel below the tub is also removed to gain access to the drain plumbing from the front and to fully free the tub for removal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rkX7O-lLVwU</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6776-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YPRM57yc_UU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Valve to Bathtub Plumbing — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Access the plumbing behind the bathtub through the access panel. Identify the hot and cold water supply lines. Cut the existing CPVC pipes to insert T-fittings. Using CPVC primer and cement, glue the T-fittings into the hot and cold lines. Connect short pieces of CPVC pipe and elbows as needed to route the water from the T-fittings to the corresponding hot (H) and cold (C) inlets of the thermostatic mixing valve. Connect the mixed water outlet (marked &apos;MIX&apos; or similar) of the valve to the bathtub faucet&apos;s water supply line. Ensure all connections are secure and allow the cement to fully cure as per the manufacturer&apos;s instructions before turning on the water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YPRM57yc_UU</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6777-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tiG0ZQ7-D3s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply Lines — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Connect the faucet&apos;s hot and cold water supply lines to the corresponding shut-off valves on the wall. The hot line is typically marked with a red indicator, and the cold with blue. Hand-tighten the connectors, and then use a wrench to give them a final quarter-turn to ensure a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tiG0ZQ7-D3s</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6777-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OP0gufw-4Qw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Hose Type Identification — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Begin by turning off the hot and cold water supply valves located under the sink by turning the handles clockwise until they stop. Next, you must identify the type of hose connection your faucet uses to follow the correct instructions. There are three common types shown: a threaded connection which screws on, a quick-disconnect with a push-button release, and a collet connection with a push-in ring mechanism. A wrench is required for the threaded type, while the others are tool-free.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OP0gufw-4Qw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6777-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/--pHOpgDkFI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Water Supply Lines — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Identify the hot and cold water supply lines; the hot line is typically marked with a red indicator. Before connecting, wrap the male threads on the hot and cold shutoff valves with Teflon tape in a clockwise direction. Connect the faucet&apos;s hot supply line to the hot water shutoff valve and the cold line to the cold water shutoff valve. Hand-tighten the connections first, then use an adjustable wrench to snug them up. Again, avoid over-tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/--pHOpgDkFI</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6778-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1Lmj2XH33xM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Faucet — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Go under the sink and turn off the hot and cold water supply by turning the shut-off valve handles clockwise until they stop. Place a towel underneath to catch drips. Use an adjustable wrench to loosen the nuts connecting the old supply lines to the valves. Once loosened, unscrew them by hand. Then, use channel-lock pliers to loosen the large mounting nut securing the old faucet. After it&apos;s loose, finish unscrewing it by hand and remove it along with any washers. Pull the old faucet up and out of the countertop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1Lmj2XH33xM</video:player_loc>
      <video:duration>100</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6778-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PaMasBhANcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Old Faucet — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Begin by locating the hot and cold water shut-off valves under the sink. Use a flathead screwdriver to turn the valve slots perpendicular to the pipe, shutting off the water flow. Next, position a basin wrench or faucet tool onto the mounting nuts securing the old faucet from below and turn to loosen them. Once loose, use pliers to loosen the supply line nuts from the shut-off valves. Finish unscrewing all connections by hand. With everything disconnected, go to the top of the sink and lift the entire old faucet assembly out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PaMasBhANcM</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6778-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X-ow54EnGjY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Faucet — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Turn off the hot and cold water shutoff valves. Using pliers, disconnect the water supply lines from the valves. Then, working under the sink, unscrew the mounting nuts that secure the old faucet. Once loose, lift the old faucet away from the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X-ow54EnGjY</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6781-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/28RKQkxciDs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Pipe — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Once the old spout is removed, thoroughly prepare the area for the new installation. Use a razor blade or utility knife to carefully scrape away any old caulk or residue from the tile surface around the pipe. Next, take plumber&apos;s mesh and scrub the copper pipe to remove any corrosion or buildup. Finally, use a wire brush to clean the threads at the end of the pipe, ensuring they are free of any debris or old sealant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/28RKQkxciDs</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6781-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ndgLiQDBzVM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal and Install New Faucet — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>Clean any old residue from the sink surface. Apply a continuous bead of waterproof silicone sealant around the faucet mounting holes to create a watertight seal. Press the new faucet firmly into the sealant. From underneath, thread on the new mounting nuts and hand-tighten them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ndgLiQDBzVM</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6781-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0jnqbx-ilds/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Copper Pipe — How to Replace a Mobile Home Garden Tub Faucet</video:title>
      <video:description>To ensure a good seal for the new faucet, the exposed end of the copper pipe must be cleaned. A piece of sandpaper is used to sand the exterior of the pipe, removing any corrosion, mineral deposits, or grime. This creates a clean, smooth surface for the new faucet&apos;s O-ring to press against.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0jnqbx-ilds</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6768-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mzgvPAQaSs8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Toilet — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Locate the water shutoff valve, typically on the wall behind the toilet, and turn the handle clockwise until it stops to turn off the water supply. Then, carefully remove the heavy ceramic tank lid and place it on a soft, safe surface, like a towel, to prevent damage. Flush the toilet to drain most of the water out of the tank, making the next steps cleaner and easier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mzgvPAQaSs8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6768-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fFuokGzxtTA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Removal — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Before starting any work, locate the water shut-off valve on the wall behind or next to the toilet. Turn the handle clockwise until it stops to completely shut off the water supply to the toilet. After shutting off the water, flush the toilet to drain most of the water from the tank. Disconnect the small fill hose that runs from the top of the fill valve to the overflow pipe. Place a tray or bucket on the floor below the tank connections to catch any remaining water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fFuokGzxtTA</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6768-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lPY0TQoRreA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water and Drain Tank — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Begin by turning off the water supply to the toilet. The shut-off valve is typically located on the wall behind the toilet. Turn the knob clockwise until it stops. Once the water is off, remove the heavy porcelain lid from the toilet tank and carefully set it aside on a protected surface. Then, press and hold the flush handle to drain as much water as possible from the tank. You will need to hold the handle down until the flapper at the bottom of the tank closes and the water has emptied.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lPY0TQoRreA</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6771-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tNAS37r9ASE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Bolts and Wax Ring — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Insert the new closet bolts into the slots on the newly installed flange. These SetFast bolts are self-adjusting. Next, place a new wax ring gasket directly onto the flange, pressing down gently to ensure it adheres.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tNAS37r9ASE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6771-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JX8xBw4hkbM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Seal the Toilet — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Carefully lift the toilet, keeping it level. Align the bolts on the floor flange with the holes in the base of the toilet. Lower the toilet straight down onto the flange. Once it&apos;s in place, press down firmly and rock it gently from side to side to compress the wax ring and create a solid, watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JX8xBw4hkbM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6771-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cCPLGu0mces/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reset and Secure the Toilet — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Carefully lift the toilet and align the holes in its base with the new closet bolts. Lower the toilet straight down onto the wax ring. Press down firmly and sit on the toilet, rocking gently, to compress the wax ring evenly and create a tight seal. Reinstall the washers and nuts on the closet bolts and tighten them alternately until snug. Do not overtighten. Place the decorative caps back on the bolts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cCPLGu0mces</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6772-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qKys6C9NezY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understanding the Toilet Flange — How to Replace a Broken Toilet Flange</video:title>
      <video:description>This step provides a detailed overview of the toilet flange, which is the fitting that connects the toilet&apos;s drain to the drainage pipe. The video showcases a 3-inch PVC flange that includes an integrated test cap, which is a convenient feature for pressure testing the drain system before the final toilet installation. The knockout cap can be removed later with a hammer and channel-lock pliers. The instructor explains the various slots and holes on the flange: four larger slots are for the toilet bolts that secure the toilet bowl to the flange, and eight smaller holes are for mounting the flange itself to the subfloor with screws. It is critical to align the toilet bolt slots parallel to the back wall for a straight toilet installation. The instructor also discusses the ideal height of the flange, which should sit on top of the finished floor, and explains how to use shims to achieve this height if installing over a thick flooring material like tile on a wood subfloor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qKys6C9NezY</video:player_loc>
      <video:duration>215</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6772-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u529afKZggA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flange and Set in Cement — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Install a new toilet flange. This video uses an Oatey Twist-N-Set flange, which is inserted into the cast iron pipe and tightened to create a compression seal. Apply a layer of mortar or hydraulic cement around the flange to build it up to be level with the tile floor and provide a solid base. Insert the new closet bolts into the flange slots, ensuring they are positioned correctly for the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u529afKZggA</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6772-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XpJAsRaKKeE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare the Drain Pipe — How to Replace a Broken Toilet Flange</video:title>
      <video:description>After all the pieces of the old flange have been removed, use a rag to wipe the inside of the main drain pipe clean. If there are any rough spots or remaining bits of old glue, you can use sandpaper to smooth the surface. Once the pipe is clean and smooth, carefully retrieve the rag and all the collected PVC debris from the drain. The opening is now prepared for the installation of a new toilet flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XpJAsRaKKeE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6769-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7qqeXJE9FXI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Closet Bolts — How to Replace a Broken Toilet Flange</video:title>
      <video:description>With the toilet now level and shimmed, use an adjustable wrench to tighten the nuts on the closet bolts located on either side of the toilet base. Tighten each side a little at a time, alternating between them to apply even pressure. Be careful not to overtighten, as this could crack the porcelain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7qqeXJE9FXI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6769-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8QXnBcQvgQQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Toilet and Clean Excess Plaster — How to Replace a Broken Toilet Flange</video:title>
      <video:description>With the toilet level, place the washers and nuts on the flange bolts. Tighten the nuts evenly on both sides with an adjustable wrench, being careful not to overtighten and crack the porcelain. Cut off the excess length of the bolts with a hacksaw. Once the plaster has set, use a utility knife to score the excess plaster around the base of the toilet. Then, use a scraper or putty knife to chip away the excess hardened plaster for a clean finish. Finally, place the bolt caps over the nuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8QXnBcQvgQQ</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6769-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eNUMY8PiSYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Closet Bolts — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Once the shims are in place and the toilet is stable, use an adjustable wrench to carefully tighten the nuts on the closet bolts located on each side of the toilet base. Alternate between tightening each side to apply even pressure. Tighten until snug, but do not overtighten, as this can crack the toilet&apos;s porcelain base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eNUMY8PiSYs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6774-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LiNJrnbJxns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drain and Remove the Toilet — How to Replace a Broken Toilet Flange</video:title>
      <video:description>With the water supply disconnected, flush the toilet to drain most of the water from the tank. Use a sponge or a wet/dry shop vacuum to remove any remaining water from both the tank and the bowl. Once the toilet is empty, carefully lift it straight up off the closet bolts and set it aside on a drop cloth or cardboard to protect the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LiNJrnbJxns</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6774-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mshmdWtVwGE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Water Line and Remove Toilet — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Place a small tray under the water supply line connection at the base of the toilet tank to catch any residual water. Use channel-lock pliers or an adjustable wrench to unscrew the supply line from the toilet&apos;s fill valve. Once the line is disconnected and both bolts are cut, the toilet is free. Carefully lift the toilet straight up off the flange and move it out of the work area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mshmdWtVwGE</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6774-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xSPiZpnCzno/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet — How to Replace a Broken Toilet Flange</video:title>
      <video:description>After preparing the area, proceed with removing the toilet. Unscrew and remove the nuts from the closet bolts that secure the toilet base to the floor flange. Once the nuts are off, gently rock the toilet to break the wax seal. Lift the toilet straight up and carefully move it out of the way, placing it on the prepared towels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xSPiZpnCzno</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6773-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nVok2dWGJSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Flange and Clean Old Wax — How to Replace a Broken Toilet Flange</video:title>
      <video:description>After removing the toilet, inspect the flange and drain. The video shows standing water in the drain pipe, indicating a clog. The old wax seal failed to adhere to the toilet, which caused the leak. Use a putty knife to scrape the old, dirty wax ring off the flange and floor. Also remove any old caulk from around the toilet&apos;s footprint on the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nVok2dWGJSI</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6773-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xX80E21QeB4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Existing Flange — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Begin by removing any broken or corroded pieces from the existing toilet flange. Use a putty knife to carefully scrape off all of the old wax ring residue from the surface of the flange. Once the wax is removed, wipe the area clean with a towel to ensure the surface is free of debris for the new installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xX80E21QeB4</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6773-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aDyQA1PFEME/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Damage and Prepare for Repair — How to Replace a Broken Toilet Flange</video:title>
      <video:description>First, assess the broken ABS toilet flange to understand the extent of the damage. In this case, the slot for one of the toilet bolts is split, compromising its ability to hold the toilet securely. Prepare the repair by gathering a replacement flange ring and the necessary fasteners. A rag should be stuffed into the drainpipe to block sewer gases and prevent tools from falling in.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aDyQA1PFEME</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6770-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EczjTdhtz7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Test — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Slowly turn the water supply valve back on. Listen for the tank to fill and watch closely for any drips or leaks around the new gasket and bolts at the base of the tank. Once the tank is full, perform a test flush. Again, carefully inspect the connection between the tank and bowl for any signs of water. If it remains dry, the repair is successful. Place the tank lid back on top.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EczjTdhtz7E</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6770-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xdts9Uf8YHc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Check for Leaks — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Slowly turn the water supply valve back on (counter-clockwise). As the toilet tank refills, carefully inspect all the new connections for any signs of dripping or leaking. A useful trick is to wipe each connection point with a piece of dry toilet paper; any moisture will be immediately obvious. If a leak is detected, turn the water off and gently tighten the leaking connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xdts9Uf8YHc</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6770-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zwyb-IvczXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Water On and Check for Leaks — How to Replace a Broken Toilet Flange</video:title>
      <video:description>Once the installation is complete and all connections are tight, it&apos;s time to check for leaks. First, ensure all taps that you opened are now closed. Go to your main water shut-off valve and turn it back on slowly. Listen for the sound of water filling the pipes. Return to your work area and carefully inspect each of the new joints for any signs of dripping water. Use a dry paper towel to wipe the joints, which will make even the smallest leak visible. If you find a leak, turn the water off again and slightly tighten the connection before re-testing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zwyb-IvczXw</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6739-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z-DTspmEmYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Roof Setup and Safety Check — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>The plumber sets up the ladder and safely accesses the roof. The large sewer machine is carefully positioned near the main sewer vent pipe. He lays out the drain snake cable along the roof&apos;s peak, ensuring it&apos;s ready to be fed into the vent. During setup, he continually monitors the sky for the approaching thunderstorm, acknowledging the significant safety risk involved with working on a roof in such conditions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z-DTspmEmYs</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6740-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ky5rCZSovGs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unclog the Drain — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>Slowly turn on the water at the faucet. You will hear the water filling the hose and the bladder will begin to inflate, creating a seal against the inside of the drain pipe. Once sealed, a powerful jet of water will shoot out of the tip of the bladder, forcing the clog down the drain. You will likely hear a &apos;whoosh&apos; or change in sound once the clog is cleared. Turn the water off immediately after the clog is cleared.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ky5rCZSovGs</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6740-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Mw-o1JYaR4Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Water Pressure — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>With the Drain King in place, turn on the spigot for the garden hose. This sends water to the bladder, which inflates to create a tight seal inside the pipe. Once the pressure builds sufficiently, it will be released in powerful bursts, forcing water down the pipe and pushing the clog (leaves, twigs, etc.) backwards out through the skimmer opening in the pool.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Mw-o1JYaR4Y</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6740-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GY4K0cyj7Fc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear the Clog with Water Pressure — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>With the bladder securely in the pipe, have a helper turn on the water supply to the hose. The bladder will inflate, sealing the pipe, and then shoot a powerful, focused jet of water forward. This high pressure is designed to dislodge and flush away even very compacted clogs. According to the video, this can clear the drain in a matter of seconds. Once the drain is clear, turn off the water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GY4K0cyj7Fc</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6742-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h0Vjz2GLfCs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Drain and Clean Up — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>Once the drain has been snaked, remove the tool. Turn on the faucet to run water and test if the drain is now clear. The water should flow freely without backing up. Use a rag or paper towels to clean up any debris that was splattered onto the sink basin and surrounding areas. Check the plumbing underneath the sink to ensure no leaks were created during the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h0Vjz2GLfCs</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6742-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZrZ_VmmSduc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Drain — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>After removing the clog, test the drain to ensure it&apos;s working properly. Turn on the water and let it run. The water should now drain away quickly without pooling in the tub. Turn the water off and watch it drain completely. A sign of a successfully cleared drain is a strong vortex or spiral as the last of the water goes down. Once confirmed, you can reinstall the drain plug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZrZ_VmmSduc</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6742-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fVU9e0aGkPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Flushing and Turn Off Water — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>After running the water for about five minutes and confirming there are no leaks, go back outside and turn the water off at the spigot. Remove the garden hose from the vent stack. The clog should now be cleared.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fVU9e0aGkPY</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6744-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/INae6g0CZ0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extend Vent Pipe to Highest Point — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>The most critical step is to extend the vent pipe to the highest possible point of the house, well above the roofline. The narrator shows the pipe extending past the first floor, past the upper bathroom&apos;s exhaust fan, and up towards the roof. This height ensures that any odorous gases released from the septic tank are carried away by the wind and do not settle near windows, doors, or air intakes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/INae6g0CZ0c</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6744-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CNE4jMu0-CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Sleeve — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>Take the prepared white PVC sleeve and slide it over the top of the existing black sewer vent pipe. Position it so that the angled bottom edge is seated firmly and squarely on the roof flashing around the base of the vent.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CNE4jMu0-CE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6744-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ypalxNGE9Yo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Vent Pipe and AAV — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>Extend the 2-inch vanity drain pipe vertically up into the wall cavity. This pipe will also function as the vent. Drill holes through the horizontal wall plates to run the pipe upwards. Since a traditional vent through the roof is not being installed, an Air Admittance Valve (AAV), also known as a mechanical vent, will be installed on top of this pipe. The AAV must be installed according to local code, which typically requires it to be at least 6 inches above the flood level rim of the highest fixture it is venting and be accessible for future maintenance or replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ypalxNGE9Yo</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6743-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IZZQaMXv5y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Inspect Vent Pipe — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>First, identify the location of your plumbing vent pipes. These are connected to your plumbing system and typically extend vertically through the roof to allow air circulation for proper drainage. Once located, inspect the opening of the vent pipe for any visible obstructions such as leaves, animal nests, or other debris that could be blocking airflow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IZZQaMXv5y4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6743-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0L7yUrcsXeo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose the Problem and Locate the Vent — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>Begin by identifying the symptoms of a clogged vent, such as gurgling sounds from drains and slow-draining sinks or toilets. In the basement or utility area, trace the drain lines from the affected fixtures to the main vent stack. Follow this PVC pipe visually as it runs up through the house and exits through the roof. From the ground, use a ladder if necessary to visually inspect the vent opening on the roof for obstructions like leaves, sticks, or nests.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0L7yUrcsXeo</video:player_loc>
      <video:duration>112</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6743-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0L7yUrcsXeo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Vent Pipe with a Vacuum — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>Securely position an extension ladder to safely access the roof. Carefully climb onto the roof, carrying the assembled vacuum hose. Have an assistant on the ground to turn the shop vacuum on and off on your signal. Sit or kneel in a stable position next to the clogged vent pipe, insert the hose, and push it down until you feel the obstruction. Signal for the vacuum to be turned on and work the hose up and down to dislodge and suck out all the debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0L7yUrcsXeo</video:player_loc>
      <video:duration>246</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6741-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kbtFImSZCYA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Use a Drain Auger to Clear the Clog — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>If you are experiencing any of the above symptoms, attempt to clear the blockage using a plumbing snake, also known as a drain auger. Wear protective gloves. Insert the flexible cable of the auger into the affected drain or cleanout pipe. Push the cable in until you feel resistance from the clog. Turn the handle of the auger to rotate the cable, which helps break up or hook onto the blockage. Carefully retract the cable to remove the debris. The video shows a manual drain auger being used in a sink to demonstrate the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kbtFImSZCYA</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6741-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eDCwcI2dpkM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Use a Plumber&apos;s Snake — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>For deep clogs, use a plumber&apos;s snake (or auger). Insert the spring end into the drain and feed it down the pipe until you feel resistance from the clog. Once you&apos;ve located the clog, crank the handle while simultaneously pushing and pulling the snake. This combination of rotation and movement will break up the clog. Be careful not to scratch the sink&apos;s finish with the metal snake.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eDCwcI2dpkM</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6741-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z_D-Zksmgc8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Snake the Toilet Trap — How to Clear a Clogged Plumbing Vent Stack on Your Roof</video:title>
      <video:description>With the auger in position, push the handle down to feed the cable into the toilet&apos;s internal S-trap. When you feel resistance, stop pushing and begin turning the crank handle clockwise. While cranking, apply gentle, steady downward pressure. The combination of turning and pushing helps the auger head navigate the tight bends of the trap. Continue this process until the cable has been fed all the way in or you&apos;ve broken through the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z_D-Zksmgc8</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6680-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9CwjoRKbMaw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Break Up and Retrieve Clog — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Once you feel the clog, work the auger back and forth. You can retract the cable slightly, then advance it again several times to either break the clog apart or to securely hook it with the auger&apos;s spiral head. To retrieve the clog, set the directional switch to the reverse position (&apos;R&apos;) and squeeze the trigger. This will pull the cable and the hooked obstruction back out of the toilet drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9CwjoRKbMaw</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6680-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KcATYe3Qi9g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Navigate the Trap and Extend the Cable — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>With the auger positioned, hold the outer tube steady with one hand and begin to turn the crank handle with the other. As you turn the handle, apply gentle downward pressure to feed the flexible auger cable into and through the toilet&apos;s S-shaped trap. You may need to wiggle or slightly rotate the entire tool to help it navigate the tight bends inside the toilet. Continue feeding the cable until you feel it make contact with the obstruction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KcATYe3Qi9g</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6680-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LKeAUnPcp4U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Retract Auger and Test Flush — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Once the clog has been broken up or hooked, crank the handle in the reverse direction to retract the cable. Carefully pull the auger out of the toilet. In this demonstration, the auger successfully retrieves a cloth that was causing the clog. After removing the tool and the obstruction, flush the toilet to confirm that the water flows freely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LKeAUnPcp4U</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6678-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5KlHi-iTjp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Retract and Remove Auger — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>After successfully clearing the clog, you need to remove the auger. Begin rotating the handle in a counter-clockwise direction while simultaneously pulling the handle up and away from the shaft. This retracts the snake back into the protective guide tube. Once the cable is fully retracted, carefully lift the entire auger out of the toilet bowl. Be mindful of dripping water and debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5KlHi-iTjp0</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6678-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9e5IKRTUc0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attempt to Clear Clog with Toilet Auger — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Attempt to clear the clog using a toilet auger. Wear protective gloves, insert the auger&apos;s cable into the toilet bowl, and crank the handle to extend the cable into the drain. Work the auger back and forth to break up or hook onto the blockage. A toilet auger is more effective than a plunger for clogs beyond the immediate toilet trap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9e5IKRTUc0c</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6678-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zqtxofm9pVM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extract Clog and Clean Auger Head — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>After successfully hooking the clog, the plumber carefully pulls the auger cable back out of the overflow pipe. A large, messy clump of hair and other debris is extracted on the end of the auger. He uses his gloved hands to remove the gunk from the auger head and disposes of it in the prepared trash bag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zqtxofm9pVM</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6681-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AYFC_OK_FSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert and Operate the Auger — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>First, pull the auger&apos;s handle all the way up to fully retract the cable. Carefully insert the curved, rubber-protected end of the auger into the toilet bowl&apos;s drain opening. Make sure the curve is positioned to guide the cable smoothly into the trap. Once it&apos;s seated, begin pushing the handle down while simultaneously cranking the handle in a circular motion. This combined action feeds the auger cable into the toilet&apos;s internal trap and pipe to break up or retrieve the obstruction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AYFC_OK_FSA</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6681-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c3IL4Qhepmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extend and Work the Auger to Clear the Clog — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Hold the main shaft of the auger firmly with one hand to keep it steady. With your other hand, turn the crank handle clockwise while simultaneously applying gentle forward pressure. This action extends the flexible cable into and through the toilet&apos;s trap. Work the cable back and forth by pushing and pulling the handle, and continue to twist it to either break up the clog or hook onto it for retrieval.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c3IL4Qhepmc</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6681-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kzH-b8JnulA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Operate the Auger to Clear the Clog — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>With the auger in position, turn the crank handle clockwise to extend the flexible cable into the drainpipe. Apply gentle, steady pressure to guide the cable through the toilet&apos;s internal trap. The narrator extends the cable six feet to ensure it reaches well past any potential clog. As you work, move the auger back and forth and continue rotating the handle. This combined motion helps to either break up the obstruction or hook onto it so it can be pulled out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kzH-b8JnulA</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6679-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vio2SH1_KWA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Toilet Auger — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Begin by preparing the toilet auger for use. If the handle is locked to the shaft, disengage it. Pull the crank handle all the way up to retract the auger&apos;s cable and retriever head fully into the protective boot at the bottom of the tool. This prevents the metal head from scratching the toilet bowl during insertion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vio2SH1_KWA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6679-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fa5spW7Kyvc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Auger — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Begin by preparing the toilet auger for use. Pull the crank handle away from the main shaft to unlock it. Then, pull the handle all the way up, which retracts the flexible spring coil completely inside the auger&apos;s protective shaft. This ensures the coil is not exposed and won&apos;t scratch the toilet bowl upon insertion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fa5spW7Kyvc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6679-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SCHBCotnKUM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Auger — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>To prepare the toilet auger for use, pull the handle upwards. This action retracts the flexible cable, bringing the coiled boring head up to the end of the protective guide tube.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SCHBCotnKUM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6677-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z5d5potdgfo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Work Area and Drain Pipe — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Begin by preparing the work area. The main water supply should already be turned off. Place a small bucket under the existing angle stop valve. Disconnect the toilet supply line from the valve and allow any remaining water in the pipe to drain into the bucket. Use a paper towel to wipe up any spills around the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z5d5potdgfo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6677-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8G-hBeTnVo8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Place a small bucket or towel under the water supply line connection to catch any drips. Use a wrench to loosen and disconnect the water supply line from the bottom of the fill valve. Next, locate the two tank bolts under the rim of the toilet bowl. Use a wrench or socket to unscrew the nuts from these bolts. Once the nuts and washers are removed, carefully lift the toilet tank straight up and off the bowl. Place it on a protected surface like a towel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8G-hBeTnVo8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6677-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S76uDankJ84/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Prepare the work area for the fill valve removal. Turn off the water supply by twisting the shut-off valve behind the toilet clockwise until it stops. Flush the toilet to empty the tank. Place a bucket and an old towel under the tank to catch any remaining water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S76uDankJ84</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6682-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/unGOWFcVPWE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert and Crank the Auger — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Carefully insert the head of the toilet auger into the toilet bowl&apos;s drain. Position the curved protective sleeve at the bottom of the bowl. Begin manually turning the crank handle in a clockwise motion to feed the auger cable down into the toilet&apos;s internal S-trap and toward the obstruction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/unGOWFcVPWE</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6682-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AYFC_OK_FSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert and Operate the Auger — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>First, pull the auger&apos;s handle all the way up to fully retract the cable. Carefully insert the curved, rubber-protected end of the auger into the toilet bowl&apos;s drain opening. Make sure the curve is positioned to guide the cable smoothly into the trap. Once it&apos;s seated, begin pushing the handle down while simultaneously cranking the handle in a circular motion. This combined action feeds the auger cable into the toilet&apos;s internal trap and pipe to break up or retrieve the obstruction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AYFC_OK_FSA</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6682-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DRhN2JkJlOo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Insert the Auger — How to Use a Toilet Auger to Clear a Stubborn Clog</video:title>
      <video:description>Begin by pulling the crank handle back to retract the auger&apos;s cable completely into the guide tube. Carefully position the curved end of the auger into the toilet bowl, ensuring the protective rubber boot rests at the bottom of the drain opening to prevent scratching the porcelain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DRhN2JkJlOo</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6576-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3ciDdBL6G4A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Detach Sprayer Head — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>First, pull the sprayer head out from the main faucet body to get enough slack in the hose. Then, locate the connection point where the head meets the flexible hose. Unscrew the sprayer head by turning it counter-clockwise. If it&apos;s too tight to turn by hand, use a pair of slip-joint pliers to get a better grip on the nut at the base of the head.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3ciDdBL6G4A</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6576-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7J_Mhe5BR3U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Feed Hose and Attach Sprayer Head — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>After securing the connection under the sink, move to the top of the sink. Pull the free end of the new sprayer hose up through the hole in the sink deck or countertop. Take the new sprayer head and screw it onto the threaded end of the hose. Hand-tighten the sprayer head firmly. There is typically a washer inside the sprayer head connection, so over-tightening with a tool is usually not necessary and could damage the plastic threads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7J_Mhe5BR3U</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6576-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W4o5q0dwq7s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Faucet Body — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Move back to the top of the sink. With the mounting nuts removed, lift the faucet assembly up and away from the sink. The faucet will still be attached to the side sprayer via a hose in the middle. Twist the entire faucet body counter-clockwise to unscrew it from the sprayer hose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W4o5q0dwq7s</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6577-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sJeB4v4dtoQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Hose Under Sink — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Under the sink, take the quick-connect fitting on the end of the new hose and push it firmly onto the corresponding faucet supply fitting. Ensure there is an audible &apos;click&apos; to confirm it is securely locked. Make sure the hose hangs freely without getting tangled on other pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sJeB4v4dtoQ</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6577-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Dv1CoQRPsW4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Sprayer Hose and Attach Weight — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Locate the main water line coming from the faucet base. Push the quick-connect adapter firmly onto this line until you hear and feel it click into place. Next, attach the hose weight onto the black pull-down sprayer hose at the designated marked area. Finally, connect the end of the pull-down hose to the other side of the quick-connect adapter, ensuring it also clicks securely to complete the connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Dv1CoQRPsW4</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6577-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dHFx-vBF3pg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Hose Assembly — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Connect the hose assembly to the spout and valve bodies. Push the center T-fitting of the hose assembly onto the faucet&apos;s receiving tube until the green collet is secure; test the connection by gently pulling down. Next, connect the two ends of the hose to the hot and cold valve bodies. These are quick-connect fittings, so push them on until they are secure. Ensure the alignment is straight and be careful not to damage the O-rings on the valve bodies during connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dHFx-vBF3pg</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6572-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KmrzED7u-N0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Prepare the area under the sink for the repair. Clear out any items to create space. Place a towel directly under the P-trap and drain pipe assembly to absorb any spills. Position a bucket on top of the towel to catch the water that will drain from the sink. Use a flashlight to illuminate the pipes and fittings so you can see what you are working on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KmrzED7u-N0</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6572-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JDLqg1efjck/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Mounting Nut — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Clear any items from the cabinet underneath the sink to create a clear working area. Use a flashlight to look up at the underside of the faucet. You will see a threaded shank coming down from the faucet spout, secured by a large nut and a C-shaped washer. This nut is what needs to be tightened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JDLqg1efjck</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6572-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hDwjilLwcjo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Under the Sink — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Go to the cabinet underneath the kitchen sink. Use a flashlight to illuminate the dark space. Locate the flexible hose that connects to the pull-down sprayer head and identify the black, cylindrical counterweight that is clamped onto it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hDwjilLwcjo</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6574-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AY29Uuh4uI8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Spray Hose — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Under the sink, identify where the flexible metal spray hose connects to the check valve, which is attached to the main water supply hose. Unscrew this connection by hand, turning it counter-clockwise. The check valve piece must be fully detached from the spray hose, as it is too large to pass through the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AY29Uuh4uI8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6574-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d8P8zeUhOyc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Sprayer Head — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Begin by pulling the flexible faucet hose out from the main faucet body to get enough slack to work. Grasp the sprayer head and the hose connector and turn the sprayer head counter-clockwise to unscrew and detach it from the hose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d8P8zeUhOyc</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6574-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/As1F18sxj5Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Detach the Leaking Hose — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>To detach the hose, use a screwdriver or pliers to loosen the metal hose clamp securing it to the sink drain or garbage disposal. Once the clamp is loose, slide it down the hose, away from the connection point. Then, gently pull the hose off the connection nipple. Be prepared with a bucket and towel to catch any water that may spill out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/As1F18sxj5Y</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6575-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0QPjVk5lJYc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Faucet — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Begin by installing the new faucet onto the sink. Pass the flexible hot and cold water supply hoses through the mounting hole on the sink deck. From underneath the sink, place the rubber gasket and the metal mounting bracket over the hoses and onto the faucet&apos;s threaded stud. Thread the retaining nut onto the stud and use a basin wrench or the special supplied tool to tighten it until the faucet is firmly secured to the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0QPjVk5lJYc</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6575-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xk1iW4gvtF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Spout and Sprayer Head — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Begin assembling the top part of the faucet by unthreading the hose connector from the main faucet body. Feed the pull-down hose through the high-arc spout, then guide the other end of the hose down through the faucet body. Push the spout down firmly onto the faucet body until it clicks securely into place. Finally, attach the sprayer head to the end of the pull-down hose by threading it on by hand until it&apos;s snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xk1iW4gvtF8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6575-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DLeM4T6zBok/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect the New Sprayer Hose — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Underneath the sink, take the end of the new sprayer hose and align it with the quick-connect port on the faucet body. Push the hose upward into the port until you feel it click or seat fully. Then, take the blue retaining clip and push it back into its slot, squeezing it until it snaps securely into its locked position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DLeM4T6zBok</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6573-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Dv1CoQRPsW4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Installation for Leaks and Functionality — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Slowly turn the hot and cold water supply valves back on. Turn on the faucet handle and let the water run for a minute to flush out any debris. Carefully inspect all connection points (supply lines, sprayer hose adapter, and faucet base) for any drips or leaks. Test the different faucet functions, such as switching between stream and spray modes and using the pause button. Pull the sprayer head down and confirm that the weight retracts it smoothly back into its dock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Dv1CoQRPsW4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6573-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q053fJgRcPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush and Test Faucet — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>Before installing the sprayer head, the presenter turns the water supply on at the shut-off valves. He then operates the faucet handle to flush both the hot and cold water lines, clearing out any potential debris. After flushing, he turns the water off, screws the sprayer head onto the hose, and then turns the water back on to test the faucet&apos;s full functionality, including the spray and stream modes, and checks for any leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q053fJgRcPM</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6573-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ab8dhPMd1bU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Replace a Kitchen Sink Sprayer and Hose</video:title>
      <video:description>With the sprayer head re-tightened, turn the water supply back on using the under-sink shut-off valves. Turn on the faucet and operate the sprayer function. Hold the repaired connection and thoroughly dry it with a cloth, then carefully inspect for any signs of dripping or seeping water to confirm the leak has been successfully stopped.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ab8dhPMd1bU</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6511-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3xONh3qfDD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Drain Flange — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>To remove the old flange, first go underneath the tub and secure the locknut. In this case, a large 2-inch socket on a breaker bar is used, wedged against the floor to keep it from turning. Back inside the tub, insert a knurled drain flange removal tool into the old flange. Attach a ratchet and extension to the tool and turn counter-clockwise to unscrew and lift the old flange out of the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3xONh3qfDD4</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6511-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dqFFuBpMH2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pry and Peel Out Old Flange Pieces — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Take a pry bar or a flathead screwdriver and chisel to get underneath one of the cut sections of the flange. Pry the edge up to create a lip you can grab. Then, use a pair of channel lock pliers to firmly grip the piece and peel it inward and out of the pipe. Repeat this process for each section you cut until the entire old flange is removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dqFFuBpMH2U</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6511-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AIrQXU00N9s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Broken Cast Iron Flange — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>This is the most difficult step. Cast iron flanges are often sealed with lead. Use an angle grinder with a diamond wheel to make cuts into the flange itself, being careful not to cut the lead seal if possible. Then, use a heavy hammer and a chisel with a hand guard to break the flange apart. The key is to use the chisel to deform and break the lead seal between the flange and the pipe. Once the seal is broken, the flange can be pried out or knocked down into the drain pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AIrQXU00N9s</video:player_loc>
      <video:duration>132</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6512-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Vurig8jhGw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen and Unscrew the Flange — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Apply steady, strong, counter-clockwise pressure on the pipe wrench to begin unscrewing the drain flange. The initial turn may require significant effort. Continue this process, repositioning the wrecking bar and wrench after each partial turn to get a new grip. The video shows the user switching between two different wrenches to find the best fit and leverage as the flange loosens.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Vurig8jhGw</video:player_loc>
      <video:duration>205</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6512-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rgmfrYcnTBE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Expand and Secure the Tool — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Use a large adjustable wrench to hold the lower, larger hex nut on the extractor tool stationary. With a second adjustable wrench, turn the smaller, square nut on the very top of the tool clockwise. This action expands the serrated base of the tool, forcing it to press firmly against the inside walls of the drain fitting and locking it securely in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rgmfrYcnTBE</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6512-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0QTqx5la6Fk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unscrew the Drain Fitting — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>With the pry bar securely wedged, use it as a large handle to turn the drain fitting counter-clockwise. Apply steady force to break the old seal and threadings loose. Continue turning until the drain fitting is completely unscrewed from the drain assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0QTqx5la6Fk</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6513-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y3jgevErgIc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Surfaces and Components — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Once the drain assembly is removed, you must thoroughly clean all the old, hardened plumber&apos;s putty from the sink&apos;s surface around the drain hole. Use a putty knife or a screwdriver to scrape it off carefully. Also, clean the underside of the drain flange on the part you removed, ensuring it is completely free of old putty and grime. Both surfaces must be clean and dry for the new putty to create a proper seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y3jgevErgIc</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6513-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SadhEZ3j1JA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Surface — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Thoroughly clean the area for the new installation. Use a scraper or chisel to remove any old wax, grout, or sealant from the floor around the drain opening. Switch to an angle grinder with a wire brush or grinding wheel attachment to clean the inner surface of the cast iron drain pipe. This ensures a clean, smooth surface for the new flange to seal against. Finally, wipe the entire area with a cloth to remove all dust and debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SadhEZ3j1JA</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6513-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UI4x9GU-h6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Excess Putty — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Once the drain flange is fully tightened, use a small screwdriver, a plastic putty knife, or your finger to wipe away the excess plumber&apos;s putty that has squeezed out around the flange. Be careful not to scratch the surface of the bathtub. A cloth can be used for the final wipe-down for a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UI4x9GU-h6E</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6514-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r8KOPmzbLig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cleaning the tub drain opening — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>After successfully removing the drain flange, use a flat-head screwdriver or a putty knife to carefully scrape off any old, hardened plumber&apos;s putty from the surface of the tub around the drain opening. Next, use your household cleaner to wipe away any remaining rust or gunk. Finally, use a toothbrush to thoroughly clean the threads of the tailpiece where the new flange will be screwed in. If the drain is blocked, you can now use a zip-it drain tool to remove any hair clogs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r8KOPmzbLig</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6514-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1Q2dmzWiyXA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Drain Flange — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Carefully place the new drain flange with the plumber&apos;s putty into the drain opening. Begin threading it by hand in a clockwise direction. To tighten it fully, use a pair of duckbill pliers or a specialized drain wrench to grip the crossbars inside the flange. Turn clockwise until the flange is snug against the tub. Do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1Q2dmzWiyXA</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6514-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Vurig8jhGw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Flange and Inspect — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Once the drain flange is completely unscrewed from the drain pipe threads, lift it out of the bathtub. The task is now complete, revealing the drain pipe opening and a significant amount of old, hardened plumber&apos;s putty and debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Vurig8jhGw</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6510-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8wD1dkUgMEU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Sink Area — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Begin by ensuring the sink basin is completely clean and clear of any debris. This is a crucial preparatory step to prevent anything from accidentally falling down the drain pipe once the stopper is removed. The video highlights that this process is for modern pop-up stoppers, which operate by being pushed, as opposed to older models with a lift rod.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8wD1dkUgMEU</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6510-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AqceCL-tq0I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Clean Up — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>After confirming the drain is clear, it&apos;s time to reassemble. Clean the gunk off the stopper mechanism and the overflow plate. Carefully guide the stopper mechanism back into the overflow pipe, align the faceplate with the screw holes, and tighten the screws with your screwdriver. Finally, clean the tub to remove any residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AqceCL-tq0I</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6510-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qcLnZjett6U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Stopper — How to Remove a Stuck Bathtub Drain Flange</video:title>
      <video:description>Take the lift-and-turn stopper and place it into the strainer body in the tub&apos;s drain. Use a flathead or Phillips screwdriver to tighten the central screw or pin, which secures the stopper mechanism to the crossbars inside the drain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qcLnZjett6U</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6444-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C4cKDlDg-U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hand-Tighten Fittings — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>After applying thread compound to the male threads of the pipe, begin assembling the connection. Take the corresponding female fitting and screw it onto the pipe by hand. Tighten it as much as you can manually. This initial hand-tightening ensures the threads are properly aligned before applying the force of a wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C4cKDlDg-U</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6444-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JXKOkRVdpjM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare New Union with Teflon Tape — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>To ensure a watertight seal, apply Teflon tape to the male threads of both new union fittings. Wrap the tape clockwise, which is the same direction the fitting will be tightened. Apply approximately 6 to 8 rotations, ensuring the threads are covered but not so thick that it prevents proper tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JXKOkRVdpjM</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6444-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yuZEME25unM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wrapping Pipe Threads with Teflon Tape — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>To properly seal the threads of a pipe fitting, begin by holding the male-threaded fitting firmly. Take the roll of Teflon tape and place the loose end onto the threads, starting about one or two threads back from the very end of the fitting. Hold the end of the tape down with your thumb. Proceed to wrap the tape around the threads in a clockwise direction, which is the same direction you will turn the fitting to tighten it. As you wrap, keep the tape taut and ensure it lies flat within the threads, overlapping the previous layer by about half its width. Complete three to four full revolutions around the fitting. Once you have sufficient coverage, tear the tape from the roll and press the loose end firmly against the threads to secure it. This clockwise wrapping technique is crucial because it ensures that as you screw the fitting into its mating part, the friction will work to tighten the tape wrap rather than unraveling it, creating a reliable, watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yuZEME25unM</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6440-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hMnfbih1zwk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Sealant — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>Take a roll of new Teflon tape and wrap it tightly around the cleaned male threads of the fitting. Wrap the tape in a clockwise direction 5 to 7 times. After wrapping the tape, apply a bead of pipe sealant or silicone lubricant over the tape, spreading it evenly around the threads. This combination creates a superior, long-lasting seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hMnfbih1zwk</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6440-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xcsMWtEmsp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Pipe Thread Sealant (Pipe Dope) — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>After the thread seal tape is applied, open the pipe thread sealant (pipe dope) and use the applicator brush to spread a layer of the sealant over the tape. Ensure all the threads are covered. This provides a secondary seal and lubricates the threads for easier installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xcsMWtEmsp0</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6440-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yuZEME25unM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wrapping Pipe Threads with Teflon Tape — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>To properly seal the threads of a pipe fitting, begin by holding the male-threaded fitting firmly. Take the roll of Teflon tape and place the loose end onto the threads, starting about one or two threads back from the very end of the fitting. Hold the end of the tape down with your thumb. Proceed to wrap the tape around the threads in a clockwise direction, which is the same direction you will turn the fitting to tighten it. As you wrap, keep the tape taut and ensure it lies flat within the threads, overlapping the previous layer by about half its width. Complete three to four full revolutions around the fitting. Once you have sufficient coverage, tear the tape from the roll and press the loose end firmly against the threads to secure it. This clockwise wrapping technique is crucial because it ensures that as you screw the fitting into its mating part, the friction will work to tighten the tape wrap rather than unraveling it, creating a reliable, watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yuZEME25unM</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6443-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a3-_MzFutAw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Proper Tape Wrapping — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>To correctly apply the tape, first ensure you are wrapping in a clockwise direction, following the direction of the threads. Start the wrap approximately 1 to 2 millimeters in from the front edge of the threads to prevent any overhang. Pull the tape taut as you wrap it around the fitting. Continue wrapping for three to four complete rotations to build up enough material to create a robust seal. Once wrapped, tear the tape from the roll.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a3-_MzFutAw</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6443-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yuZEME25unM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wrapping Pipe Threads with Teflon Tape — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>To properly seal the threads of a pipe fitting, begin by holding the male-threaded fitting firmly. Take the roll of Teflon tape and place the loose end onto the threads, starting about one or two threads back from the very end of the fitting. Hold the end of the tape down with your thumb. Proceed to wrap the tape around the threads in a clockwise direction, which is the same direction you will turn the fitting to tighten it. As you wrap, keep the tape taut and ensure it lies flat within the threads, overlapping the previous layer by about half its width. Complete three to four full revolutions around the fitting. Once you have sufficient coverage, tear the tape from the roll and press the loose end firmly against the threads to secure it. This clockwise wrapping technique is crucial because it ensures that as you screw the fitting into its mating part, the friction will work to tighten the tape wrap rather than unraveling it, creating a reliable, watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yuZEME25unM</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6443-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pPmVW_Jiywc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Teflon Tape — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>Take the roll of Teflon tape and wrap it tightly around the male threads of the pipe. Always wrap the tape in a clockwise direction (the same direction you will tighten the fitting). This prevents the tape from unraveling as you screw the fitting on. Apply several layers, typically 3 to 5, to ensure a good, thick seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pPmVW_Jiywc</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6441-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HR6N3O-YXOQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wrap the Fitting with Thread Sealing Tape — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>This step covers the correct method for applying thread sealing tape. First, ensure you wrap the tape in a clockwise direction, which is the same direction that the fitting will be tightened. This prevents the tape from bunching up or unraveling during installation. The key technique shown is to flip the tape roll over so the tape comes off the top. As you wrap it clockwise around the fitting&apos;s male threads, the roll itself will want to wind tighter, keeping tension on the tape. This results in a very neat and snug wrap. Manually allow the tape to unspool as you make several passes around the threads. After 3-5 wraps, pull the tape sharply to snap it off the roll. The result is a clean, tight seal that won&apos;t unravel when you connect the fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HR6N3O-YXOQ</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6441-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GvXw_PskzuY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wrap the Threads Clockwise — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>Wrap the tape around the threads in a clockwise direction, moving towards the base of the fitting. Use your fingers to keep the tape pulled tight as you wrap. Overlap each layer by about half the width of the tape. Continue wrapping for approximately 3 to 5 full rotations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GvXw_PskzuY</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6441-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0MvYwTZttXY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Tension and Wrap — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>Continue wrapping the tape around the threads, making sure to pull the tape taut. Applying tension is key, as it stretches the tape and forces it to conform to the shape of the threads, creating a superior seal. A loosely wrapped tape will not be effective. Complete three to four full rotations around the threaded portion of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0MvYwTZttXY</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6442-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xcsMWtEmsp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Thread Seal Tape — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>Take the thread seal tape and wrap it around the male threaded connections on the shower valve. It is crucial to wrap the tape in a clockwise direction, which is the same direction the fitting will be tightened. This prevents the tape from unraveling as you screw on the adapter. Apply several revolutions of tape to ensure a good seal, keeping it taut as you wrap.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xcsMWtEmsp0</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6442-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hMnfbih1zwk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Sealant — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>Take a roll of new Teflon tape and wrap it tightly around the cleaned male threads of the fitting. Wrap the tape in a clockwise direction 5 to 7 times. After wrapping the tape, apply a bead of pipe sealant or silicone lubricant over the tape, spreading it evenly around the threads. This combination creates a superior, long-lasting seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hMnfbih1zwk</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6442-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pPmVW_Jiywc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Teflon Tape — How to Apply Thread Seal Tape (Teflon Tape) Correctly</video:title>
      <video:description>Take the roll of Teflon tape and wrap it tightly around the male threads of the pipe. Always wrap the tape in a clockwise direction (the same direction you will tighten the fitting). This prevents the tape from unraveling as you screw the fitting on. Apply several layers, typically 3 to 5, to ensure a good, thick seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pPmVW_Jiywc</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6435-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/de1GVQQHocE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Before starting the installation, locate the main water shut-off valve for the house or building and turn it to the off position. Then, open a nearby faucet to relieve any remaining pressure in the water lines, draining the residual water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/de1GVQQHocE</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6435-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DrJcYWzd-QA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Locate the main water shut-off valve for the house, which is typically found where the water service line enters the building, upstream of the regulator. Turn the valve handle perpendicular to the pipe to shut off the water flow completely. To drain the system, open a faucet at the lowest point in the house, like a basement sink or outdoor hose bib.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DrJcYWzd-QA</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6435-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pyBTL7GugHo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Begin by locating the main water shut-off valve for the sink or the entire house and turning it clockwise to stop the water flow. After the water is off, open the faucet to drain any remaining water from the lines, which helps to relieve pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pyBTL7GugHo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6439-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vDCnxFHfLSM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Determine where to cut the copper pipe by measuring the length needed for the tub spout using a tape measure.  Mark the copper pipe where it needs to be cut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vDCnxFHfLSM</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6439-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/StT0dXsxEBA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut copper pipe — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Measure and cut the copper pipe coming out from the wall such that it will be no more than 1 5/8&apos; from the wall after attaching the compression fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/StT0dXsxEBA</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6439-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V19tj3MMFrs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Cut Pipe — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Before starting, turn off the main water supply to the house. Open a nearby faucet to relieve pressure in the pipes. Using a tape measure and a marker, measure and mark a 9 and 1/4 inch section on the 3/4 inch copper pipe where the filter will be installed. Use a pipe cutter to cut and remove this section of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V19tj3MMFrs</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6438-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5J1WewbdCeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare New Pipes and Fittings — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Take the old valve assembly to a workbench. Measure all the pipe lengths and fitting placements. Cut new half-inch copper pipes to match these measurements. After cutting, use a reaming tool to deburr the inside of each pipe end. Then, use a pipe cleaning tool to clean the outside of the pipe ends and the inside of all new copper fittings. Apply a thin layer of flux to all cleaned surfaces that will be soldered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5J1WewbdCeQ</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6438-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bihc7Ey28hA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Copper Pipe — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>First, measure the existing copper pipe to determine the cut location. Use a pipe cutter to make a clean, square cut on the pipe. After cutting, use a deburring tool to ream the inside of the pipe, removing any sharp edges or burrs. Finally, thoroughly clean the outside of the pipe end with sandpaper or emery cloth until it is shiny to ensure a proper surface for soldering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bihc7Ey28hA</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6438-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cPwSM6UkNJQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Flux Pipes — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Thoroughly clean the outside of the two cut pipe ends and the inside of the copper coupling. Use a pipe cleaning brush or sandpaper to ensure the surfaces are shiny and free of oxidation. Apply a thin, even layer of water-soluble solder flux to all cleaned surfaces. The flux helps the solder flow evenly into the joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cPwSM6UkNJQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6437-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CEqs0w-NcF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Go back to the main water shut-off and turn it on very slowly to allow the pipes to fill gradually, preventing a water hammer. Listen for the sound of water running; it should stop once the pipes are full. Return to the new angle stop valve and meticulously inspect the connection point at the compression nut for any leaks. Use a dry paper towel or your finger to feel around the joint for moisture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CEqs0w-NcF8</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6437-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9-O2bfxka8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush System and Check for Leaks — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>After soldering all connections and allowing them to cool, turn the main water supply back on. Let water run through the open valve body for about 15 seconds to flush out any debris, such as solder flux or copper shavings. While the water is on, carefully inspect all the new joints for any signs of leaks. Once flushing is complete and you&apos;ve confirmed there are no leaks, turn the water supply off. Reinsert the cartridge, making sure the &apos;HC&apos; marking is at the top, and secure it by reinserting the retainer clip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9-O2bfxka8A</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6437-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z_tJut6-l4c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test for Leaks — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Once the soldered joints have completely cooled, reinstall the internal components. Place the valve cartridge back into the brass housing, followed by the attachment bracket. Secure everything in place using the provided screws and a screwdriver. Turn the water back on slowly at the local shut-off valves and check for any drips or leaks around the new solder joints and threaded fittings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z_tJut6-l4c</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6436-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ggdBm3mZslU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Joint — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Place a heat-resistant mat behind the joint for protection. Using a propane torch, heat the copper pipe just behind the fitting first for a few seconds. Then, move the flame to heat the fitting itself. Once hot enough, touch the lead-free solder to the seam of the joint, opposite the flame. The heat will draw the solder into the joint, filling it completely. Move the solder around the joint to ensure full coverage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ggdBm3mZslU</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6436-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cXrGnXwWyYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Solder the Joint — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Ignite a propane torch and heat the joint, focusing the flame on the brass fitting rather than the copper pipe. When the flux starts to bubble and smoke, touch the end of the solder to the seam where the pipe meets the fitting. The heat from the fitting should melt the solder and draw it into the joint. Move the solder around the entire seam to ensure a complete seal. Once done, turn off the torch and use a wet rag to wipe away any excess flux.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cXrGnXwWyYs</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6436-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V9hSatEDRiE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Heat and Solder the Joint — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>To hold the assembly steady, place it on top of a pipe cutter and the deburring tool. Using a torch, begin heating the fitting, not the pipe. Apply heat evenly around the fitting. Once the flux starts to bubble and the copper changes color slightly, touch the lead-free solder to the joint on the side opposite the flame. The heat of the fitting should melt the solder, drawing it into the joint via capillary action to create a complete seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V9hSatEDRiE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6434-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4-gw-gWqbJw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Repair — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Once the system is refilled and all faucets are closed, test the fixtures where the water hammer was previously noticed. Turn the taps on and off quickly to check if the banging noise has been eliminated or significantly reduced. The recharged air chambers should now cushion the shock of the water stopping abruptly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4-gw-gWqbJw</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6434-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/71778hZcOjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Water Hammer Arrestors — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>For persistent water hammer, especially near specific appliances like washing machines or dishwashers, you can install water hammer arrestors. These are small devices, like tiny shock absorbers, that attach to your water lines. They contain a piston or a diaphragm that absorbs the pressure surge when a valve closes abruptly, preventing the shockwave from rattling the pipes. They are a long-term solution and can be installed on the hot and cold water lines near the problematic appliance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/71778hZcOjg</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6434-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FasP3QD5HPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Arrestor — How to Install an Air Chamber to Prevent Water Hammer</video:title>
      <video:description>Install the water hammer arrestor onto the water supply line at the location of the problem. This means attaching it to the hot or cold water lines that connect to the noisy appliance, such as the washing machine, dishwasher, or water heater. The device threads onto the valve or a T-fitting in the line, where it cushions the blow from the water, stopping the violent rattling of the pipes and eliminating the hammer noise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FasP3QD5HPM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6428-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-ndRtFGGfoo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Drain Flange and Test for Leaks — How to Replace a Pop-up Bathtub Drain and Overflow Assem</video:title>
      <video:description>Return to the inside of the bathtub. For the best seal, apply a thin rope of plumber&apos;s putty to the underside of the drain flange rim. Carefully align the drain flange with the drain shoe below and begin threading it in clockwise by hand. Once it&apos;s snug, use your pliers or drain wrench to tighten it fully. Be careful not to overtighten and crack the tub or strip the threads. Clean away any excess plumber&apos;s putty that squeezes out. Reinstall the drain stopper. Finally, fill the tub with water again and drain it while checking underneath for any leaks to confirm the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-ndRtFGGfoo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6428-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/D_U4zPB9uA0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the New Drain — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Take your new tub drain assembly. Roll a rope of plumber&apos;s putty between your hands until it is long enough to circle the drain. Apply the putty to the underside of the new drain&apos;s flange, pressing it firmly into place to create a continuous ring. This will form a watertight seal when the drain is installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/D_U4zPB9uA0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6428-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/61AhDoAQ9Zc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Drain Area — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>After removing the old drain, thoroughly clean the area around the drain opening on the tub surface. Use your fingers or a plastic putty knife to scrape off any old plumber&apos;s putty and soap scum. Wipe the area clean with a rag to ensure a clean, dry surface for the new drain to seal against.</video:description>
      <video:player_loc>https://www.youtube.com/embed/61AhDoAQ9Zc</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6432-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A5G3lQXtBCQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Check for Leaks — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Turn on the faucet and let the water run for a minute to test the drain flow and check for any leaks. Carefully inspect all the connections you just tightened, including both slip nuts on the P-trap and the pivot rod retaining nut, to ensure they are dry. If everything is dry and the water drains quickly, the job is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A5G3lQXtBCQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6432-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rTdVg6YvoaU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>After the tub is in place, turn on the water using the faucet to fill the tub. Allow some water to accumulate. Test the pop-up drain and the overflow to ensure they function correctly. Critically, check for any leaks around the base of the tub where the tailpiece connects to the floor drain before finishing the installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rTdVg6YvoaU</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6432-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0frYO9S5A_s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Place a dry pan and clean paper towels directly under the reassembled plumbing. Turn on the faucet and fill the sink basin completely. Pull the drain stopper to release all the water at once, putting maximum pressure on the new seals. Carefully inspect the paper towels and all pipe connections for any sign of moisture or dripping. If no leaks are found, the repair is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0frYO9S5A_s</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6426-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iKpeUXD_Mis/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unpack and Inspect New Parts — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Begin by unboxing the new overflow plate assembly. Lay out all the components, which typically include the new overflow plate with the trip lever, two mounting screws, and a new copper cotter pin. Familiarize yourself with how the trip lever mechanism attaches to the back of the plate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iKpeUXD_Mis</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6426-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/drbcDvbzh-E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Assembly — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Carefully guide the plunger assembly back down into the overflow pipe. Align the trip lever plate with the screw holes and reinsert the screws. Tighten the screws with the screwdriver, but do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/drbcDvbzh-E</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6426-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zqtxofm9pVM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Overflow Mechanism — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>With the clog removed, the plumber reassembles the drain mechanism. He carefully guides the stopper assembly back into the overflow pipe. He then aligns the overflow plate with the screw holes on the tub wall and uses the screwdriver to tighten the two screws, securing the entire mechanism back in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zqtxofm9pVM</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6430-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lmdbyMDzC90/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Remove Old Faucet — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Begin by turning off the hot and cold water supply valves located near the tub. Place a towel on the floor to catch any residual water. Open the faucet handles to relieve any pressure and confirm the water is completely shut off. Using an adjustable crescent wrench, loosen the nuts connecting the water supply lines to the back of the existing faucet. Then, loosen and remove the larger locknuts that secure the faucet body to the tub. Once all connections are loose, lift the old faucet away from the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lmdbyMDzC90</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6430-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ebPcojMsL5I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Old Faucet — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Under the sink, locate the pop-up drain assembly connected to the old faucet. Disconnect the horizontal pivot rod from the vertical lift rod strap by removing the clip. Then, loosen and remove the nut securing the supply lines to the faucet tails. A pair of pliers may be needed to start loosening the nuts. Place a paper towel or rag underneath to catch any dripping water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ebPcojMsL5I</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6430-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-JG7ys3mZ5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect and Remove Old Faucet — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Gain access to the plumbing behind the tub, typically through an access panel. Carefully disconnect the hot, cold, and shower riser water lines from the back of the old faucet. These connections use swivel adapters that should be unscrewed by hand. Be gentle, as old CPVC pipe is known to be brittle and can crack easily. After the water lines are free, move to the front of the tub. The faucet is held in place by large plastic nuts on the threaded shanks; unscrew these. Once the nuts are off, you can pull the entire old faucet assembly away from the tub surround.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-JG7ys3mZ5w</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6431-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3xONh3qfDD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten the Assembly — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>To fully tighten the assembly, you must hold the flange stationary from above while tightening the locknut from below. Insert a drain key into the crossbars of the new flange. Use a pair of large channel-lock pliers to hold the drain key handle, preventing the flange from rotating. While holding the top steady, go underneath and use your preferred tool (like the large socket and wrench) to tighten the locknut until it is very snug. You will see the excess plumber&apos;s putty squeeze out from under the flange lip inside the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3xONh3qfDD4</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6431-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HjQVuJ_zUWM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Drain Fitting — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Apply a thick ring of plumber&apos;s putty around the underside of the new drain fitting&apos;s flange. Insert the new brass fitting into the drain opening from inside the tub. From below, attach the gasket and thread on the new drain shoe. Use a drain wrench from above and pliers from below to tighten the assembly until the excess putty squeezes out, creating a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HjQVuJ_zUWM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6431-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UI4x9GU-h6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten New Drain Flange — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Carefully insert the new drain flange with the plumber&apos;s putty into the drain opening. Hand-tighten it by turning it clockwise, ensuring it threads correctly into the waste shoe below without cross-threading. Once it is hand-tight, use the drain wrench and an adjustable wrench or screwdriver to fully tighten the flange. Tighten it until the flange is flush with the tub and a small amount of plumber&apos;s putty has squeezed out around the edge. This indicates a good seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UI4x9GU-h6E</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6427-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q1_wmAO7kEg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Drain Mechanism — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Insert the clean stopper back into the drain, making sure that the hole in the bottom of the stopper is facing towards the back of the sink. From underneath, slide the pivot rod back into its opening, ensuring it passes through the hole in the stopper. Hand-tighten the retaining nut. Reconnect the pivot rod to the clevis strap with the spring clip. Finally, screw the decorative cap back onto the top of the stopper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q1_wmAO7kEg</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6427-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0QPjVk5lJYc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Drain Lever — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Connect the mechanical linkage for the pop-up drain. Insert the horizontal pivot rod into the drain body and hook it to the bottom of the stopper. Attach the vertical lift rod to the pivot rod using the clip. Use a screwdriver to tighten the screw that connects the lift rod to the faucet&apos;s pull-up rod, ensuring the stopper opens and closes correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0QPjVk5lJYc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6427-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X-ow54EnGjY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Drain and Pop-Up Assembly — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Insert the new drain assembly into the sink drain hole. From below, screw on and tighten the drain body. Assemble the pop-up drain mechanism by inserting the pivot rod and connecting it to the lift rod strap. Adjust as needed to ensure the stopper opens and closes correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X-ow54EnGjY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6429-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NiRZBKGg2ek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tighten Drain Assembly — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Insert the sealed drain shoe assembly from underneath the tub, pressing it against the drain opening. From inside the tub, screw the drain strainer into the drain shoe. Use a drain wrench, with a screwdriver inserted through it for leverage, to tighten the strainer firmly. This compresses the gasket and creates the seal. Return underneath and use channel-lock pliers to tighten the slip nut connecting the horizontal pipe to the overflow assembly. As a final precaution, apply sealant around the exterior seam where the drain shoe flange meets the bottom of the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NiRZBKGg2ek</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6429-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rYgY4DZetjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Overflow Assembly — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>After a dry fit has confirmed measurements, remove the overflow assembly from the tub wall. Apply a continuous bead of silicone sealant to the groove on the back of the overflow gasket. Reposition the overflow assembly behind the tub&apos;s overflow hole. From inside the tub, insert the black plastic alignment tool through the overflow hole and into the overflow assembly. Place the metal flange ring over the alignment tool and secure the entire assembly by tightening the two provided Phillips head screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rYgY4DZetjg</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6429-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xoExo8sEI4Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the Drain Tubing — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Begin by assembling the drain pipes. Slide a slip nut, followed by a poly washer, onto the end of the overflow tube. Insert this end into the top opening of the tee fitting and hand-tighten the slip nut. Repeat this process for the waste shoe: place a slip nut and poly washer onto its pipe, then connect it to the side opening of the tee fitting, hand-tightening the nut. Keeping the connections hand-tight allows for adjustments later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xoExo8sEI4Y</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6433-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3xONh3qfDD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up and Reconnect P-Trap — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Once the drain flange is securely tightened, use your finger or a putty knife to wipe away all the excess plumber&apos;s putty that has squeezed out around the flange inside the tub. Finally, go underneath the tub and reconnect the P-trap assembly by threading its slip nut onto the bottom of the new drain flange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3xONh3qfDD4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6433-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mz010mNOCoQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Drain Area — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Once the old drain assembly is removed, thoroughly clean the drain opening in the tub. Use an old toothbrush to scrub away any remaining old plumber&apos;s putty, mineral deposits, and grime from the drain threads and the surface where the new flange will sit. Wipe the area clean with paper towels. Next, access the underside of the tub to remove the old rubber gasket and replace it with the new one that came with the drain assembly kit. Finally, prepare for the new drain by rolling plumber&apos;s putty into a rope and forming a ring around the drain opening on the top side of the tub. This will create a watertight seal when the new drain is installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mz010mNOCoQ</video:player_loc>
      <video:duration>190</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/6433-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zMfHPA60sRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Drain Plumbing — How to Replace a Pop-up Bathtub Drain and Overflow Assembly</video:title>
      <video:description>Go to the area beneath the bathtub, such as a basement or crawlspace, to access the drain plumbing. Locate the P-trap and drain assembly connected to the underside of the tub. Using a wrench or by hand if possible, loosen the slip nut that connects the drain assembly to the tub&apos;s drain pipe. If the connection is old and seized, you can use a reciprocating saw to cut the pipe. The goal is to completely disconnect the tub from the house&apos;s drain system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zMfHPA60sRA</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
</urlset>