<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"
        xmlns:video="http://www.google.com/schemas/sitemap-video/1.1">
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10618-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the First Tread — installing 14-16 stair treads</video:title>
      <video:description>Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10618-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SsGTuZzNrvU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place and Secure First Tread — installing 14-16 stair treads</video:title>
      <video:description>Once the stairs are clean and dry, begin installing the carpet treads. The video shows a person carefully positioning the first tread onto a wooden step. Align the tread by ensuring it is centered or placed according to any pre-marked guidelines. Once positioned correctly, press down firmly across the entire surface of the tread, paying particular attention to the edges and corners, to activate the adhesive backing (if applicable) or secure the non-slip material. Use your hands to smooth out any air bubbles and ensure full contact with the stair surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SsGTuZzNrvU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10618-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — installing 14-16 stair treads</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10617-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FGLDVWSWDrA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stair Tread for Installation — installing 14-16 stair treads</video:title>
      <video:description>Begin by taking one carpet stair tread and positioning it so that the back, adhesive-covered side is facing upwards. Locate the edge of the clear protective plastic film that covers the adhesive. Carefully peel this film away from the adhesive backing. The adhesive is visibly applied in a wavy or zig-zag pattern across the back of the tread. Ensure the entire plastic film is removed to fully expose the adhesive surface, preparing the tread for immediate installation onto a stair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FGLDVWSWDrA</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10617-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — installing 14-16 stair treads</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10617-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oS29zHGw5YQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel Backing from Tread — installing 14-16 stair treads</video:title>
      <video:description>The video shows a close-up of a carpet stair tread, demonstrating how to peel off the clear plastic backing to expose the self-adhesive layer. This reveals the &apos;sticky side&apos; that will adhere to the stair surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oS29zHGw5YQ</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10613-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10613-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10613-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stairs and Measure — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>Begin by thoroughly cleaning the stairs. Use a vacuum cleaner to remove any dust, pet hair, or debris. Then, use a damp cloth with an all-purpose cleaner to wipe down each stair tread and riser, ensuring they are free of dirt and grime. Allow the stairs to dry completely. Next, measure the width and depth of each stair tread. It&apos;s common for stairs to have slight variations, so measure each one individually. Decide on the placement of the carpet treads, typically leaving a consistent reveal on the sides and front of each stair. This will help determine the ideal size of your treads if you are cutting them, or guide placement if using pre-made ones. The video starts by showing the finished carpeted stairs, implying these preparatory steps have already been completed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10616-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10616-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10616-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Measurement Types — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>The presenter begins by explaining that to order the perfect size carpet stair tread, two primary measurements are required: the width and the depth of the stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10614-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10614-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10614-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10615-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10615-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10615-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — How to measure your 13 steps for ordering carpet stair treads</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10612-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure my stairs</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10612-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure my stairs</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10612-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — measure my stairs</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10610-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure my stairs</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10610-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure my stairs</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10610-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — measure my stairs</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10611-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — measure my stairs</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10611-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — measure my stairs</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10611-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure my stairs</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10609-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — measure my stairs</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10609-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — measure my stairs</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10609-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Subfloor and Measure Riser — measure my stairs</video:title>
      <video:description>Before beginning the installation, ensure the subfloor of the stairs is thoroughly clean. Then, use a stair tread templating tool to accurately measure the dimensions of the stair riser. This tool is crucial because stairs are rarely perfectly square, allowing for precise transfer of measurements to the flooring material.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10405-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — I want to install stair threads and landing pad.for 14 stairs. Can you h</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10405-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — I want to install stair threads and landing pad.for 14 stairs. Can you h</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10405-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stairs and Measure — I want to install stair threads and landing pad.for 14 stairs. Can you </video:title>
      <video:description>Begin by thoroughly cleaning the stairs. Use a vacuum cleaner to remove any dust, pet hair, or debris. Then, use a damp cloth with an all-purpose cleaner to wipe down each stair tread and riser, ensuring they are free of dirt and grime. Allow the stairs to dry completely. Next, measure the width and depth of each stair tread. It&apos;s common for stairs to have slight variations, so measure each one individually. Decide on the placement of the carpet treads, typically leaving a consistent reveal on the sides and front of each stair. This will help determine the ideal size of your treads if you are cutting them, or guide placement if using pre-made ones. The video starts by showing the finished carpeted stairs, implying these preparatory steps have already been completed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10404-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YVF2TiFLgMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Bullnose Edge Width — I want to install stair threads and landing pad.for 14 stairs. Can you</video:title>
      <video:description>The most critical first step is to accurately measure the width of the bullnose edge of the stair landing. This measurement should correspond precisely to the width of the carpet stair tread installed on the step immediately below the landing. For example, if the stair tread is 35 inches wide, the landing carpet&apos;s edge should also be 35 inches wide to maintain visual continuity. Measure from the far left side to the far right side of the bullnose edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YVF2TiFLgMw</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10404-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YVF2TiFLgMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Customize Tape Outline — I want to install stair threads and landing pad.for 14 stairs. </video:title>
      <video:description>With the entire carpet area clearly defined by painter&apos;s tape, use a tape measure to take precise measurements of all sides and segments of the blue tape outline. This will provide the exact dimensions needed for ordering or cutting the carpet for the landing. The amount of visible wood flooring between the carpet edge and the walls is a matter of personal preference; some prefer the carpet to be very close to the wall, while others prefer more exposed wood. Adjust the tape placement to reflect this desired aesthetic before taking final measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YVF2TiFLgMw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10404-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — I want to install stair threads and landing pad.for 14 stairs. Can </video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10406-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CtnOYw-UEDw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select, Order, and Unpack Custom Stair Treads — I want to install stair threads and landing pad.for </video:title>
      <video:description>Recognizing the limitation of traditional stair runners for a floating staircase, the homeowner identifies &quot;Oak Valley Designs&quot; as a specialist in custom stair treads. They review various fabric options, including different patterns and textures, as shown through samples. Once selected, the custom treads are received and unboxed, revealing the chosen design (a dark pattern with white and brown accents) and individual protective plastic wrapping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CtnOYw-UEDw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10403-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measuring stairs for carpet treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10403-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measuring stairs for carpet treads</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10403-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measuring stairs for carpet treads</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10402-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measuring stairs for carpet treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10402-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measuring stairs for carpet treads</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10402-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measuring stairs for carpet treads</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10401-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WjkM8ou_xoI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Stair Tread Placement — measuring stairs for carpet treads</video:title>
      <video:description>To ensure consistent and straight placement of the carpet treads, measure the desired distance from the edge of the stairs. Then, use blue painter&apos;s tape to create parallel guide lines up the entire staircase. This helps in visually aligning each tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WjkM8ou_xoI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10401-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread Placement — measuring stairs for carpet treads</video:title>
      <video:description>To ensure accurate and consistent placement of each stair tread, the homeowner uses blue painter&apos;s tape to mark the desired position on the hardwood steps. A measuring tape is used to confirm precise spacing and alignment, ensuring a symmetrical reveal of the wood on both sides of each tread. This meticulous marking helps maintain a uniform and professional look across the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10401-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measuring stairs for carpet treads</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10400-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measuring stairs for carpet treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10400-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measuring stairs for carpet treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10400-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measuring stairs for carpet treads</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10396-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measuring a set of stairs with a landing, specifically 3 stairs, then a</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10396-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stairs and Measure — measuring a set of stairs with a landing, specifically 3 stairs, then a</video:title>
      <video:description>Begin by thoroughly cleaning the stairs. Use a vacuum cleaner to remove any dust, pet hair, or debris. Then, use a damp cloth with an all-purpose cleaner to wipe down each stair tread and riser, ensuring they are free of dirt and grime. Allow the stairs to dry completely. Next, measure the width and depth of each stair tread. It&apos;s common for stairs to have slight variations, so measure each one individually. Decide on the placement of the carpet treads, typically leaving a consistent reveal on the sides and front of each stair. This will help determine the ideal size of your treads if you are cutting them, or guide placement if using pre-made ones. The video starts by showing the finished carpeted stairs, implying these preparatory steps have already been completed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10396-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sfgZWTtWnVc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stairs — measuring a set of stairs with a landing, specifically 3 stairs, then a landing</video:title>
      <video:description>Begin by removing any existing stair coverings, such as old runners or individual treads, to reveal the bare wooden stairs. Once clear, thoroughly vacuum each stair to remove dust, dirt, and any debris that might prevent the new treads from adhering properly. Ensure the surface is clean and dry.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sfgZWTtWnVc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10399-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measuring a set of stairs with a landing, specifically 3 stairs, then a </video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10399-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measuring a set of stairs with a landing, specifically 3 stairs, th</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10399-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measuring a set of stairs with a landing, specifically 3 stai</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10398-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measuring a set of stairs with a landing, specifically 3 stairs, then a </video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10398-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measuring a set of stairs with a landing, specifically 3 stairs, then a</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10398-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measuring a set of stairs with a landing, specifically 3 stai</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10397-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measuring a set of stairs with a landing, specifically 3 stairs, th</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10397-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measuring a set of stairs with a landing, specifically 3 stai</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10397-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R9BqXkhQa84/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Align First Stair Tread — measuring a set of stairs with a landing, specifically 3 stair</video:title>
      <video:description>Begin by taking a pre-cut carpet stair tread and placing it on the first visible step. Use a tape measure to check its width and ensure it is centered and aligned properly on the stair. The video shows measuring from the edge of the stair to the edge of the tread to confirm consistent placement. Make any necessary adjustments to ensure perfect alignment before permanently attaching.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R9BqXkhQa84</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10392-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measuring stairs</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10392-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SsGTuZzNrvU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unbox and Prepare Stairs — measuring stairs</video:title>
      <video:description>The video begins by showcasing the product box from &apos;OAK VALLEY DESIGNS&apos; clearly labeled &apos;CARPET STAIR TREADS&apos;. The first step involves carefully opening the package and inspecting the treads for any damage or defects. Following this, the wooden staircase needs to be thoroughly prepared. This involves cleaning each step to remove any dirt, dust, or debris that could hinder adhesion. A vacuum cleaner can be used for loose particles, and a mild cleaning solution with a cloth for any grime. Ensure the stairs are completely dry before proceeding. Although not explicitly shown, measuring the center of each step and marking a guideline can help ensure consistent placement of the treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SsGTuZzNrvU</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10392-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stairs and Measure — measuring stairs</video:title>
      <video:description>Begin by thoroughly cleaning the stairs. Use a vacuum cleaner to remove any dust, pet hair, or debris. Then, use a damp cloth with an all-purpose cleaner to wipe down each stair tread and riser, ensuring they are free of dirt and grime. Allow the stairs to dry completely. Next, measure the width and depth of each stair tread. It&apos;s common for stairs to have slight variations, so measure each one individually. Decide on the placement of the carpet treads, typically leaving a consistent reveal on the sides and front of each stair. This will help determine the ideal size of your treads if you are cutting them, or guide placement if using pre-made ones. The video starts by showing the finished carpeted stairs, implying these preparatory steps have already been completed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10395-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measuring stairs</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10395-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measuring stairs</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10395-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measuring stairs</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10393-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measuring stairs</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10393-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YVF2TiFLgMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Bullnose Edge Width — measuring stairs</video:title>
      <video:description>The most critical first step is to accurately measure the width of the bullnose edge of the stair landing. This measurement should correspond precisely to the width of the carpet stair tread installed on the step immediately below the landing. For example, if the stair tread is 35 inches wide, the landing carpet&apos;s edge should also be 35 inches wide to maintain visual continuity. Measure from the far left side to the far right side of the bullnose edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YVF2TiFLgMw</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10393-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measuring stairs</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10394-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measuring stairs</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10394-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark First Tread Placement — measuring stairs</video:title>
      <video:description>Take the first stair tread and center it on the first stair. Once properly positioned, use a piece of cardboard or painter&apos;s tape to mark the exact placement of the tread on the stair. This will serve as a consistent guide for positioning all subsequent treads, ensuring a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10394-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R9BqXkhQa84/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Align First Stair Tread — measuring stairs</video:title>
      <video:description>Begin by taking a pre-cut carpet stair tread and placing it on the first visible step. Use a tape measure to check its width and ensure it is centered and aligned properly on the stair. The video shows measuring from the edge of the stair to the edge of the tread to confirm consistent placement. Make any necessary adjustments to ensure perfect alignment before permanently attaching.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R9BqXkhQa84</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10388-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — how to measure stairs for carpet treads</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10388-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — how to measure stairs for carpet treads</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10388-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stairs and Measure — how to measure stairs for carpet treads</video:title>
      <video:description>Begin by thoroughly cleaning the stairs. Use a vacuum cleaner to remove any dust, pet hair, or debris. Then, use a damp cloth with an all-purpose cleaner to wipe down each stair tread and riser, ensuring they are free of dirt and grime. Allow the stairs to dry completely. Next, measure the width and depth of each stair tread. It&apos;s common for stairs to have slight variations, so measure each one individually. Decide on the placement of the carpet treads, typically leaving a consistent reveal on the sides and front of each stair. This will help determine the ideal size of your treads if you are cutting them, or guide placement if using pre-made ones. The video starts by showing the finished carpeted stairs, implying these preparatory steps have already been completed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10391-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — how to measure stairs for carpet treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10391-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — how to measure stairs for carpet treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10391-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — how to measure stairs for carpet treads</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10390-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — how to measure stairs for carpet treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10390-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — how to measure stairs for carpet treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10390-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — how to measure stairs for carpet treads</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10389-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — how to measure stairs for carpet treads</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10389-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark First Tread Placement — how to measure stairs for carpet treads</video:title>
      <video:description>Take the first stair tread and center it on the first stair. Once properly positioned, use a piece of cardboard or painter&apos;s tape to mark the exact placement of the tread on the stair. This will serve as a consistent guide for positioning all subsequent treads, ensuring a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10389-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread Placement — how to measure stairs for carpet treads</video:title>
      <video:description>To ensure accurate and consistent placement of each stair tread, the homeowner uses blue painter&apos;s tape to mark the desired position on the hardwood steps. A measuring tape is used to confirm precise spacing and alignment, ensuring a symmetrical reveal of the wood on both sides of each tread. This meticulous marking helps maintain a uniform and professional look across the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10384-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measure stairs with a landing after the 4th step</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10384-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stairs and Measure — measure stairs with a landing after the 4th step</video:title>
      <video:description>Begin by thoroughly cleaning the stairs. Use a vacuum cleaner to remove any dust, pet hair, or debris. Then, use a damp cloth with an all-purpose cleaner to wipe down each stair tread and riser, ensuring they are free of dirt and grime. Allow the stairs to dry completely. Next, measure the width and depth of each stair tread. It&apos;s common for stairs to have slight variations, so measure each one individually. Decide on the placement of the carpet treads, typically leaving a consistent reveal on the sides and front of each stair. This will help determine the ideal size of your treads if you are cutting them, or guide placement if using pre-made ones. The video starts by showing the finished carpeted stairs, implying these preparatory steps have already been completed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10384-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — measure stairs with a landing after the 4th step</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10387-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs with a landing after the 4th step</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10387-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measure stairs with a landing after the 4th step</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10387-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark First Tread Placement — measure stairs with a landing after the 4th step</video:title>
      <video:description>Take the first stair tread and center it on the first stair. Once properly positioned, use a piece of cardboard or painter&apos;s tape to mark the exact placement of the tread on the stair. This will serve as a consistent guide for positioning all subsequent treads, ensuring a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10386-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure stairs with a landing after the 4th step</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10386-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YVF2TiFLgMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Bullnose Edge Width — measure stairs with a landing after the 4th step</video:title>
      <video:description>The most critical first step is to accurately measure the width of the bullnose edge of the stair landing. This measurement should correspond precisely to the width of the carpet stair tread installed on the step immediately below the landing. For example, if the stair tread is 35 inches wide, the landing carpet&apos;s edge should also be 35 inches wide to maintain visual continuity. Measure from the far left side to the far right side of the bullnose edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YVF2TiFLgMw</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10386-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Measurement Types — measure stairs with a landing after the 4th step</video:title>
      <video:description>The presenter begins by explaining that to order the perfect size carpet stair tread, two primary measurements are required: the width and the depth of the stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10385-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — measure stairs with a landing after the 4th step</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10385-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Treads to Size — measure stairs with a landing after the 4th step</video:title>
      <video:description>Once measurements are taken and marked on the stair treads, use a miter saw to precisely cut them to the required width and depth. Ensure that the cuts are straight and clean for a professional finish. If the treads have a carpeted or fabric surface, you may need a sharp utility knife to score or cut through that material first, or ensure your saw blade is specifically designed for such materials to cut cleanly without fraying.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10385-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Installation and Final Inspection — measure stairs with a landing after the 4th step</video:title>
      <video:description>Repeat the placement and pressing process for all remaining carpet stair treads, moving systematically up or down the staircase. Ensure each tread is aligned consistently with the previous one, maintaining even spacing and straightness. After all treads are installed, perform a final inspection. Visually check for any misalignments or loose edges. Walk up and down the stairs to confirm that each tread feels firmly secured and does not shift underfoot, ensuring both safety and a polished aesthetic for your newly enhanced staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10381-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure stairs</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10381-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measure stairs</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10381-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measure stairs</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10380-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure stairs</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10380-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10380-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — measure stairs</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10383-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10383-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measure stairs</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10383-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure stairs</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10382-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Measurement Types — measure stairs</video:title>
      <video:description>The presenter begins by explaining that to order the perfect size carpet stair tread, two primary measurements are required: the width and the depth of the stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10382-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10382-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measure stairs</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10378-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oS29zHGw5YQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel Backing from Tread — installing stair treads on indoor wooden stairs</video:title>
      <video:description>The video shows a close-up of a carpet stair tread, demonstrating how to peel off the clear plastic backing to expose the self-adhesive layer. This reveals the &apos;sticky side&apos; that will adhere to the stair surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oS29zHGw5YQ</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10378-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — installing stair treads on indoor wooden stairs</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10378-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stair Treads — installing stair treads on indoor wooden stairs</video:title>
      <video:description>Take each individual carpet stair tread and prepare it for installation. The treads shown in the video feature a pre-applied adhesive backing covered by a protective plastic film. Carefully peel off this plastic film to expose the adhesive layer. The video shows the adhesive applied in a distinctive wavy pattern, designed to provide strong grip. Only remove the film when you are ready to apply the tread to prevent the adhesive from collecting dust or drying out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10379-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the First Tread — installing stair treads on indoor wooden stairs</video:title>
      <video:description>Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10379-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SsGTuZzNrvU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place and Secure First Tread — installing stair treads on indoor wooden stairs</video:title>
      <video:description>Once the stairs are clean and dry, begin installing the carpet treads. The video shows a person carefully positioning the first tread onto a wooden step. Align the tread by ensuring it is centered or placed according to any pre-marked guidelines. Once positioned correctly, press down firmly across the entire surface of the tread, paying particular attention to the edges and corners, to activate the adhesive backing (if applicable) or secure the non-slip material. Use your hands to smooth out any air bubbles and ensure full contact with the stair surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SsGTuZzNrvU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10379-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — installing stair treads on indoor wooden stairs</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10374-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stair Surface — install treads on floating stairs</video:title>
      <video:description>Although not explicitly demonstrated in the video, it is crucial to ensure the staircase is clean before installing the treads. Thoroughly clean each wooden stair surface to remove any dust, dirt, pet hair, or debris. This preparation ensures optimal adhesion of the non-slip backing, preventing the treads from shifting and maintaining a neat appearance. Use a vacuum cleaner for loose particles, followed by a damp cloth and a mild cleaner if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10374-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — install treads on floating stairs</video:title>
      <video:description>Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10374-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rON0c9UvU2E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Clean Stair Treads — install treads on floating stairs</video:title>
      <video:description>Begin by thoroughly cleaning the stair treads. You can use a microfiber cloth or any suitable cloth, optionally combined with a handheld vacuum, to remove all dust and loose dirt. The goal is to ensure the entire stair surface is clean and completely dry. This is crucial for the adhesive on the back of the carpet treads to stick properly. Avoid using any cleaning products that might leave a greasy residue, such as Pledge or Pine-Sol, as this can compromise the adhesive bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rON0c9UvU2E</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10376-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pn6f97DLJ8c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Adhesive Tape — install treads on floating stairs</video:title>
      <video:description>Begin by applying double-sided carpet tape to each stair tread. As shown in the video, two parallel strips of tape are typically applied: one strip along the back edge of the tread, where it meets the riser, and another strip a few inches in from the front edge of the tread, positioned behind the nosing. This placement ensures secure adhesion across the main contact points of the runner. Leave the protective backing on the tape at this stage, as it allows for precise positioning of the runner without premature adhesion. Use scissors to cut the tape to the appropriate length for each tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pn6f97DLJ8c</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10376-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the First Tread — install treads on floating stairs</video:title>
      <video:description>Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10376-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8E4JV5eR8Tk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Self-Adhesive Treads — install treads on floating stairs</video:title>
      <video:description>The installer begins the process of applying the carpet stair treads. For each tread, the protective film is peeled off the adhesive backing. The tread is then carefully placed onto a wooden stair, ensuring it is centered and aligned properly with the front edge of the step. Once positioned, firm pressure is applied across the entire surface of the tread to secure it in place. This process is repeated for each step of the staircase, moving sequentially from one step to the next. The video shows installation starting from the top and also from the bottom, illustrating the repetitive nature of the task.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8E4JV5eR8Tk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10377-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the First Tread — install treads on floating stairs</video:title>
      <video:description>Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10377-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SsGTuZzNrvU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place and Secure First Tread — install treads on floating stairs</video:title>
      <video:description>Once the stairs are clean and dry, begin installing the carpet treads. The video shows a person carefully positioning the first tread onto a wooden step. Align the tread by ensuring it is centered or placed according to any pre-marked guidelines. Once positioned correctly, press down firmly across the entire surface of the tread, paying particular attention to the edges and corners, to activate the adhesive backing (if applicable) or secure the non-slip material. Use your hands to smooth out any air bubbles and ensure full contact with the stair surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SsGTuZzNrvU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10377-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oS29zHGw5YQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Adhere Treads — install treads on floating stairs</video:title>
      <video:description>Once the adhesive is exposed, the carpet stair tread is carefully positioned onto a stair. A tape measure is then used to quickly double-check the placement, likely for centering or consistent spacing from the edge. After confirming the position, the tread is pressed down firmly with hands to ensure secure adhesion and smoothed out to remove any air bubbles or wrinkles. This process is repeated for all stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oS29zHGw5YQ</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10375-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Touches and Inspection — install treads on floating stairs</video:title>
      <video:description>Once all carpet treads are installed, perform a final inspection. Check each tread to ensure it is securely attached, aligned correctly, and free from wrinkles or bubbles. Trim any excess carpet fibers along the edges for a clean, finished look. Vacuum the entire staircase again to remove any loose fibers or dust accumulated during installation. Allow any adhesive to fully cure according to the manufacturer&apos;s instructions before heavy use of the stairs. This step completes the project, resulting in a safe and aesthetically pleasing staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10375-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8E4JV5eR8Tk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Self-Adhesive Treads — install treads on floating stairs</video:title>
      <video:description>The installer begins the process of applying the carpet stair treads. For each tread, the protective film is peeled off the adhesive backing. The tread is then carefully placed onto a wooden stair, ensuring it is centered and aligned properly with the front edge of the step. Once positioned, firm pressure is applied across the entire surface of the tread to secure it in place. This process is repeated for each step of the staircase, moving sequentially from one step to the next. The video shows installation starting from the top and also from the bottom, illustrating the repetitive nature of the task.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8E4JV5eR8Tk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10375-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oS29zHGw5YQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Adhere Treads — install treads on floating stairs</video:title>
      <video:description>Once the adhesive is exposed, the carpet stair tread is carefully positioned onto a stair. A tape measure is then used to quickly double-check the placement, likely for centering or consistent spacing from the edge. After confirming the position, the tread is pressed down firmly with hands to ensure secure adhesion and smoothed out to remove any air bubbles or wrinkles. This process is repeated for all stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oS29zHGw5YQ</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10370-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — remeasure a staircase for painting</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10370-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark First Tread Placement — remeasure a staircase for painting</video:title>
      <video:description>Take the first stair tread and center it on the first stair. Once properly positioned, use a piece of cardboard or painter&apos;s tape to mark the exact placement of the tread on the stair. This will serve as a consistent guide for positioning all subsequent treads, ensuring a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10370-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — remeasure a staircase for painting</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10372-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — remeasure a staircase for painting</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10372-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — remeasure a staircase for painting</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10372-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — remeasure a staircase for painting</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10371-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — remeasure a staircase for painting</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10371-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Position the First Tread — remeasure a staircase for painting</video:title>
      <video:description>Take the first stair tread and place it on the lowest step. Use a tape measure to ensure the tread is centered on the stair and that there is a consistent gap from the side walls on both sides. Also, measure the distance from the front edge (nosing) of the stair to the back of the tread to maintain uniform placement. Mark the desired position lightly if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10371-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R9BqXkhQa84/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Align First Stair Tread — remeasure a staircase for painting</video:title>
      <video:description>Begin by taking a pre-cut carpet stair tread and placing it on the first visible step. Use a tape measure to check its width and ensure it is centered and aligned properly on the stair. The video shows measuring from the edge of the stair to the edge of the tread to confirm consistent placement. Make any necessary adjustments to ensure perfect alignment before permanently attaching.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R9BqXkhQa84</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10373-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sfgZWTtWnVc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Project Completion and Review — remeasure a staircase for painting</video:title>
      <video:description>Once all stair treads are installed, take a step back and admire your work. The staircase should now have a consistent, aesthetically pleasing, and safer appearance. The video shows a person walking down the newly treaded stairs, demonstrating the finished look and feel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sfgZWTtWnVc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10373-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Installation and Final Inspection — remeasure a staircase for painting</video:title>
      <video:description>Repeat the placement and pressing process for all remaining carpet stair treads, moving systematically up or down the staircase. Ensure each tread is aligned consistently with the previous one, maintaining even spacing and straightness. After all treads are installed, perform a final inspection. Visually check for any misalignments or loose edges. Walk up and down the stairs to confirm that each tread feels firmly secured and does not shift underfoot, ensuring both safety and a polished aesthetic for your newly enhanced staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10373-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Review and Enjoyment — remeasure a staircase for painting</video:title>
      <video:description>Once all stair treads are installed, step back and visually inspect the entire staircase. Check for uniform spacing, straight alignment, and secure adhesion of all treads. Walk up and down the stairs to ensure they feel stable and comfortable. The video showcases the completed staircase with all treads installed, demonstrating the aesthetic and functional improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10369-1</loc>
    <lastmod>2026-11-16T02:22:03.023Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the First Tread — install stair treads</video:title>
      <video:description>Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-16T02:22:03.023Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10369-2</loc>
    <lastmod>2026-11-16T02:22:03.023Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SsGTuZzNrvU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place and Secure First Tread — install stair treads</video:title>
      <video:description>Once the stairs are clean and dry, begin installing the carpet treads. The video shows a person carefully positioning the first tread onto a wooden step. Align the tread by ensuring it is centered or placed according to any pre-marked guidelines. Once positioned correctly, press down firmly across the entire surface of the tread, paying particular attention to the edges and corners, to activate the adhesive backing (if applicable) or secure the non-slip material. Use your hands to smooth out any air bubbles and ensure full contact with the stair surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SsGTuZzNrvU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-16T02:22:03.023Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10369-3</loc>
    <lastmod>2026-11-16T02:22:03.023Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — install stair treads</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-16T02:22:03.023Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10368-1</loc>
    <lastmod>2026-11-16T02:22:03.023Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oS29zHGw5YQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel Backing from Tread — install stair treads</video:title>
      <video:description>The video shows a close-up of a carpet stair tread, demonstrating how to peel off the clear plastic backing to expose the self-adhesive layer. This reveals the &apos;sticky side&apos; that will adhere to the stair surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oS29zHGw5YQ</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-16T02:22:03.023Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10368-2</loc>
    <lastmod>2026-11-16T02:22:03.023Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stair Treads — install stair treads</video:title>
      <video:description>Starting from the top of the staircase, the homeowner carefully installs each stair tread. She begins by peeling off the protective plastic film from the adhesive backing. The tread is then aligned precisely with the previously marked tape lines, ensuring the back edge is flush with the riser. Once aligned, she firmly presses the tread onto the step, making sure it adheres well, especially over the bullnose (the rounded edge of the step). This process is repeated for each individual stair tread and for the larger custom pieces on the landings. The homeowner notes that the adhesive is designed not to damage the existing hardwood stairs, making it a suitable option for temporary or non-permanent installations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-16T02:22:03.023Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10368-3</loc>
    <lastmod>2026-11-16T02:22:03.023Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — install stair treads</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-16T02:22:03.023Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10367-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — hang a pendant light</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10367-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — hang a pendant light</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10367-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — hang a pendant light</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10366-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — hang a pendant light</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10366-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — hang a pendant light</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10366-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — hang a pendant light</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10280-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stairs and Measure — measure stairs for treads</video:title>
      <video:description>Begin by thoroughly cleaning the stairs. Use a vacuum cleaner to remove any dust, pet hair, or debris. Then, use a damp cloth with an all-purpose cleaner to wipe down each stair tread and riser, ensuring they are free of dirt and grime. Allow the stairs to dry completely. Next, measure the width and depth of each stair tread. It&apos;s common for stairs to have slight variations, so measure each one individually. Decide on the placement of the carpet treads, typically leaving a consistent reveal on the sides and front of each stair. This will help determine the ideal size of your treads if you are cutting them, or guide placement if using pre-made ones. The video starts by showing the finished carpeted stairs, implying these preparatory steps have already been completed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10283-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure stairs for treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10283-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Measurement Types — measure stairs for treads</video:title>
      <video:description>The presenter begins by explaining that to order the perfect size carpet stair tread, two primary measurements are required: the width and the depth of the stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10283-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measure stairs for treads</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10281-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Measurement Types — measure stairs for treads</video:title>
      <video:description>The presenter begins by explaining that to order the perfect size carpet stair tread, two primary measurements are required: the width and the depth of the stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10281-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — measure stairs for treads</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10281-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs for treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10282-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs for treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10282-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Measurement Types — measure stairs for treads</video:title>
      <video:description>The presenter begins by explaining that to order the perfect size carpet stair tread, two primary measurements are required: the width and the depth of the stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10282-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R9BqXkhQa84/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Align First Stair Tread — measure stairs for treads</video:title>
      <video:description>Begin by taking a pre-cut carpet stair tread and placing it on the first visible step. Use a tape measure to check its width and ensure it is centered and aligned properly on the stair. The video shows measuring from the edge of the stair to the edge of the tread to confirm consistent placement. Make any necessary adjustments to ensure perfect alignment before permanently attaching.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R9BqXkhQa84</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10275-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Project Completion — install stair treads</video:title>
      <video:description>Once all installation steps are complete, including securing risers, treads, and optional return trim, and after allowing the adhesive to fully dry (typically 24 to 48 hours), your beautiful new stairs are ready to use. Enjoy your newly updated staircase for years to come!</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10275-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9OF3FBDsqcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Showcase and Test Installation — install stair treads</video:title>
      <video:description>Once all stair treads are installed, step back to admire the finished staircase. The video shows the entire staircase with the new, uniformly placed treads, highlighting the improved appearance and added safety. Finally, walk down the stairs to test their stability and comfort, confirming the successful installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9OF3FBDsqcs</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10275-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ztC3KfZEjO0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat and Final Check — install stair treads</video:title>
      <video:description>The entire process, from measuring with the Stair Wizard jig to cutting, applying adhesive, and fastening, is repeated for each remaining stair tread. The video shows the progression of installed treads, some covered with cardboard and blue tape for protection. Once all treads are installed, the stairs are tested by walking on them to ensure they are solid, quiet, and properly secured. This confirms the successful completion of the stair tread installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ztC3KfZEjO0</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10277-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — install stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10277-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — install stair treads</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10277-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZrWNkbh5j4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalize Tread Placement — install stair treads</video:title>
      <video:description>Continue the process of preparing and securing the remaining carpet treads. It can be helpful to pre-mark the correct positioning on each step before applying the treads, ensuring a &quot;plug and play&quot; installation for increased efficiency. While using nails for extra security is an option, the double-sided tape method is highlighted as a simple, effective, and less invasive alternative for securing the treads to your stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZrWNkbh5j4M</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10278-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — install stair treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10278-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — install stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10278-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9OF3FBDsqcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stair Treads to Steps — install stair treads</video:title>
      <video:description>With the treads unpacked, carefully position one stair tread onto the surface of a stair. Ensure it is centered and aligned properly. Once placed, firmly press down on the entire surface of the tread with your hands to activate the adhesive backing and secure it to the stair. Repeat this process for each step, ensuring consistent placement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9OF3FBDsqcs</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10274-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — install stair treads</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10274-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wSsFb5YVHag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stair Surface — install stair treads</video:title>
      <video:description>Before applying the anti-slip strip, it is crucial to ensure the stair surface is clean, dry, and free of any dust, dirt, or grease. Use a cleaning cloth and a mild cleaner to thoroughly wipe down the area where the strip will be applied. Allow the surface to dry completely to ensure optimal adhesion of the self-adhesive strip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wSsFb5YVHag</video:player_loc>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10274-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry the Stairs — install stair treads</video:title>
      <video:description>After cleaning, it is essential that your stairs are completely dry before proceeding with the installation of the anti-slip treads. This will prevent moisture from compromising the adhesive&apos;s bond. Allow ample time for air drying, or use a dry cloth to speed up the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10279-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Stair Centerline — install stair treads</video:title>
      <video:description>To ensure accurate and straight placement of the anti-slip treads, use masking tape to create a guideline. Place a strip of masking tape along the front edge of the stair tread. Next, measure the total width of the stair using a measuring tape. Divide this measurement in half to find the center point. Use a pencil to mark this center point directly onto the masking tape. Repeat for each stair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10279-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CtnOYw-UEDw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Custom Stair Treads — install stair treads</video:title>
      <video:description>With the existing carpet removed and the new custom treads unboxed, the installation process begins. The homeowner places each tread onto a stair, using a measuring tape to ensure consistent and accurate positioning across the width and depth of the step. The clear plastic film covering the adhesive backing on each tread is peeled away, and the tread is then carefully pressed down firmly onto the wooden step. This process is repeated for each stair, working from the bottom of the staircase upwards to avoid disturbing previously installed treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CtnOYw-UEDw</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10279-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hwZQcHGafM0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Tread Dimensions for Curved Sections — install stair treads</video:title>
      <video:description>After placing the pre-cut nosing in position, the installer makes new marks along the edges where the tread will meet the wall and the nosing. He uses a measuring tape to measure the dimensions, such as 5 inches on one side and 10 and 5/8 inches on the other, for the long board. To ensure a straight cut line between these two points, he applies diagonal tape and then marks the line with a pencil using a beam level as a guide. This method helps account for any irregularities in the wall or the staircase itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hwZQcHGafM0</video:player_loc>
      <video:duration>269</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10276-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — install stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10276-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — install stair treads</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10276-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — install stair treads</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10250-1</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Carpet Stair Treads</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10250-2</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Carpet Stair Treads</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10250-3</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Carpet Stair Treads</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10252-1</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Carpet Stair Treads</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10252-2</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Carpet Stair Treads</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10252-3</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Carpet Stair Treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10251-1</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Carpet Stair Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10251-2</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — Carpet Stair Treads</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10251-3</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Carpet Stair Treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10253-1</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CtnOYw-UEDw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select, Order, and Unpack Custom Stair Treads — Carpet Stair Treads</video:title>
      <video:description>Recognizing the limitation of traditional stair runners for a floating staircase, the homeowner identifies &quot;Oak Valley Designs&quot; as a specialist in custom stair treads. They review various fabric options, including different patterns and textures, as shown through samples. Once selected, the custom treads are received and unboxed, revealing the chosen design (a dark pattern with white and brown accents) and individual protective plastic wrapping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CtnOYw-UEDw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10253-2</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Introduction and Product Overview — Carpet Stair Treads</video:title>
      <video:description>The presenter introduces Oak Valley Designs&apos; Bullnose Carpet Stair Treads, explaining their key features. These treads are manufactured in North Georgia and feature a triple-reinforced, rounded front edge designed to give the staircase the look and safety of a traditional runner. They come with a built-in pad and a pressure-sensitive adhesive with a peel-and-release liner on the back, making installation super easy and non-damaging to wooden steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10253-3</loc>
    <lastmod>2026-11-14T21:56:56.616Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TaW4vHLABrc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Introduction and Material Overview — Carpet Stair Treads</video:title>
      <video:description>The presenter introduces the project, which is the installation of carpet stair treads. He notes that the staircase is already prepared with padding and tack strips (smooth edge) along the back and sides of the treads. The carpet being used is &apos;Anderson Tufftex Marrakech,&apos; made of 100% nylon, featuring a felt backing and a distinctive pattern. Each carpet piece is cut to 15 inches long by 36 and 1/8 inches wide, ensuring a slight overhang on each side to be tucked.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TaW4vHLABrc</video:player_loc>
      <video:duration>100</video:duration>
      <video:publication_date>2026-11-14T21:56:56.616Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10248-1</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — Carpet Stair Treads</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10248-2</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IOgUldDtg1c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet — Carpet Stair Treads</video:title>
      <video:description>Measure the width of the stair tread from stringer to stringer (e.g., 36 1/8 inches) and the depth from the nose to the back riser (e.g., 13 inches). To allow for trimming and a snug fit, cut the carpet pieces slightly larger than these measurements (e.g., 37 inches wide by 14 inches deep). Use a utility knife and a straight edge to ensure clean, straight cuts. You will need one carpet piece per tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IOgUldDtg1c</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10248-3</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nCu4uIwBOOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Stairs — Carpet Stair Treads</video:title>
      <video:description>To ensure the carpet runner is long and wide enough, accurate measurements are essential. First, select one stair tread (the horizontal top surface of a step) and measure its depth. Next, measure the height of the riser (the vertical part of the step). Multiply the height by the number of risers and the depth by the number of treads on your staircase. Add these two sums together, then add an additional 6 to 8 inches to account for waste. This total will be the required length of the runner. If using more than one runner, add an additional 12 inches to the total length to account for seams where the two carpet pieces will join. If your staircase includes a landing and you plan to install the runner there, ensure you include the landing area in your measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nCu4uIwBOOE</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10246-1</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Rise — Carpet Stair Treads</video:title>
      <video:description>The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10246-2</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/reF4dSqKIho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Vertical Rise — Carpet Stair Treads</video:title>
      <video:description>Accurately measure the vertical distance from the top surface of the lower floor to the top surface of the upper floor where the stairs will connect. This measurement is crucial for all subsequent calculations. For this example, a total rise of 35 inches will be used.</video:description>
      <video:player_loc>https://www.youtube.com/embed/reF4dSqKIho</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10246-3</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Carpet Stair Treads</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10247-1</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Carpet Stair Treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10247-2</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Carpet Stair Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10247-3</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Carpet Stair Treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10249-1</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o5yWhdPoZgA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Marking Out the Reveals — Carpet Stair Treads</video:title>
      <video:description>The first step is to mark out the reveals around the door frame. Reveals are small gaps that help accommodate any slight warpage in the trim materials and provide a consistent visual line. For one or two doors, a standard tape measure and a sharp pencil are sufficient. Measure 3/16 inch or 1/4 inch from the edge of the door jamb and mark this line. For multiple doors, it&apos;s more efficient and accurate to use a custom-made reveal block, which is a small block of wood cut to the desired reveal width. Simply place the block against the door jamb and trace along its edge with a pencil to create the reveal line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o5yWhdPoZgA</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10249-2</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g6tLq8czSgE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark the Reveal Line — Carpet Stair Treads</video:title>
      <video:description>Define the reveal line on the door jamb, which is the consistent gap between the door and the trim. The creator recommends a 1/4-inch reveal. Use a Kreg Multi-Mark tool by flushing its blue piece against the door jamb, extending the ruler, and using a pencil to draw a consistent 1/4-inch line along the entire jamb.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g6tLq8czSgE</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10249-3</loc>
    <lastmod>2026-11-15T20:22:02.614Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ry-Mw-YgqxY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Pre-Assemble Casing Trim — Carpet Stair Treads</video:title>
      <video:description>To create a seamless, professional look for the trim pieces that will cap the jambs, use a Kreg multi-mark tool to mark a 13/16 inch reveal from the edge of the jamb. This mark will guide the placement of the decorative trim. For the decorative trim that will go on the header, ensure it is cut to the exact length needed (e.g., 55 1/4 inches). This measurement is taken from the inside edge of the vertical casing on one side to the inside edge of the vertical casing on the other side. This will give it the look of a solid piece of wood. The casing legs are then pocket-holed to the header for a strong, hidden connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ry-Mw-YgqxY</video:player_loc>
      <video:duration>277</video:duration>
      <video:publication_date>2026-11-15T20:22:02.614Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10245-1</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Your Drawing — Stair Tread Measurement</video:title>
      <video:description>Once the sub-treads are exposed, consult the provided Stair Supplies engineered tread drawings. Verify that all the new treads are accounted for and that their dimensions, such as tread width, tread depth, and nosing depth, match the specifications on the drawing. Use a tape measure to confirm these dimensions. This crucial step helps prevent errors during the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10245-2</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CtnOYw-UEDw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select, Order, and Unpack Custom Stair Treads — Stair Tread Measurement</video:title>
      <video:description>Recognizing the limitation of traditional stair runners for a floating staircase, the homeowner identifies &quot;Oak Valley Designs&quot; as a specialist in custom stair treads. They review various fabric options, including different patterns and textures, as shown through samples. Once selected, the custom treads are received and unboxed, revealing the chosen design (a dark pattern with white and brown accents) and individual protective plastic wrapping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CtnOYw-UEDw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10245-3</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Notches for Open-Sided Treads — Stair Tread Measurement</video:title>
      <video:description>For stair treads that are open on one side (next to a wall stringer), use a multi-tool to cut a notch or a &apos;return&apos; piece where the tread meets the stringer. This allows for a clean, professional finish without needing excessive filler. Shape the remaining piece as needed to ensure a perfect fit with the previously installed riser and stringer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10244-1</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10244-2</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10244-3</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Stair Tread Measurement</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10243-1</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10243-2</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10243-3</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10242-1</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Stair Tread Measurement</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10242-2</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — Stair Tread Measurement</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10242-3</loc>
    <lastmod>2026-10-05T00:50:51.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U_qBttWNBfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Count Risers and Measure Tread Thickness — Stair Tread Measurement</video:title>
      <video:description>The presenter counts the number of existing risers (steps) from the top landing down to the bottom floor, noting each one. Then, he measures the thickness of one of the granite treads that will be installed on the stairs. He confirms that the staircase has 16 risers and that each granite tread has a thickness of 10.5 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U_qBttWNBfI</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-05T00:50:51.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10238-1</loc>
    <lastmod>2026-11-15T10:39:21.597Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Carpet Stair Covers</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-11-15T10:39:21.597Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10238-2</loc>
    <lastmod>2026-11-15T10:39:21.597Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oAUp2WuHH6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Number of Risers and Treads — Carpet Stair Covers</video:title>
      <video:description>Measure the total vertical distance (total rise) from the top of the lower floor (where the stairs begin) to the top of the upper floor (where the stairs end). For instance, if the measurement is 8 feet 9 inches (105 inches). Then, divide the total rise (in inches) by a desired individual riser height (e.g., 7 or 7.5 inches, common building code standards) to determine the number of risers. For example, 105 inches / 7.5 inches = 14 risers. Remember that the number of treads will be one less than the number of risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oAUp2WuHH6M</video:player_loc>
      <video:duration>232</video:duration>
      <video:publication_date>2026-11-15T10:39:21.597Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10238-3</loc>
    <lastmod>2026-11-15T10:39:21.597Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qGE43pFPnkA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Stair Dimensions — Carpet Stair Covers</video:title>
      <video:description>Measure the total rise (vertical height) from the finished concrete landing to the top surface of the raised platform where the stairs will connect. To calculate the individual step rise and run, you can either manually calculate by dividing the total rise by a target step rise (e.g., 7.5 inches) and adjusting to get an even number of steps, or use an online stair calculator (like mycarpentry.com). Input your total rise, desired step height, and tread depth, and the calculator will provide the number of steps, precise rise/run for each step, and stringer dimensions. Ensure your calculated step rise is between 6 and 8 inches for comfortable and safe stairs. This detailed calculation is crucial for accurate stringer layout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qGE43pFPnkA</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-15T10:39:21.597Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10240-1</loc>
    <lastmod>2026-11-15T10:39:21.597Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Carpet Stair Covers</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-15T10:39:21.597Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10240-2</loc>
    <lastmod>2026-11-15T10:39:21.597Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Carpet Stair Covers</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-15T10:39:21.597Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10240-3</loc>
    <lastmod>2026-11-15T10:39:21.597Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Carpet Stair Covers</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-15T10:39:21.597Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10239-1</loc>
    <lastmod>2026-11-15T10:39:21.597Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Carpet Stair Covers</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-15T10:39:21.597Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10239-2</loc>
    <lastmod>2026-11-15T10:39:21.597Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — Carpet Stair Covers</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-15T10:39:21.597Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10239-3</loc>
    <lastmod>2026-11-15T10:39:21.597Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Carpet Stair Covers</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-15T10:39:21.597Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10236-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — Install Carpet Stair Covers</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10236-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install Carpet Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10236-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Examine the Stair Tread — Install Carpet Stair Covers</video:title>
      <video:description>Begin by taking one self-adhesive carpet stair tread. Examine both sides to understand the product: one side is the carpeted surface, and the other side has protective paper strips covering the adhesive backing. Ensure the stair tread is clean and free of debris before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10237-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Install Carpet Stair Covers</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10237-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install Carpet Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10237-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Install Carpet Stair Covers</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10232-1</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Carpet Stair Covers</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10232-2</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Carpet Stair Covers</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10232-3</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Carpet Stair Covers</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10233-1</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — Carpet Stair Covers</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10233-2</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nCu4uIwBOOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Stairs — Carpet Stair Covers</video:title>
      <video:description>To ensure the carpet runner is long and wide enough, accurate measurements are essential. First, select one stair tread (the horizontal top surface of a step) and measure its depth. Next, measure the height of the riser (the vertical part of the step). Multiply the height by the number of risers and the depth by the number of treads on your staircase. Add these two sums together, then add an additional 6 to 8 inches to account for waste. This total will be the required length of the runner. If using more than one runner, add an additional 12 inches to the total length to account for seams where the two carpet pieces will join. If your staircase includes a landing and you plan to install the runner there, ensure you include the landing area in your measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nCu4uIwBOOE</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10233-3</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Lsl1tVWACmE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Stair Piece — Carpet Stair Covers</video:title>
      <video:description>After creating the first straight edge, measure the desired width for the stair carpet. In this video, the presenter states the stairs are 34 inches wide. Place the tape measure from the newly cut edge and mark the 34-inch point. Then, carefully cut along the corresponding &apos;running row&apos; at the 34-inch mark, similar to the first cut, to create the first piece of stair carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Lsl1tVWACmE</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10234-1</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — Carpet Stair Covers</video:title>
      <video:description>Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10234-2</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Carpet Stair Covers</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10234-3</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Carpet Stair Covers</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10235-1</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t2gBL7-bXp8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Construct Wood Tray for Carpet Inlay on Treads — Carpet Stair Covers</video:title>
      <video:description>For open riser stairs with carpet inlays, a unique &apos;wood tray&apos; design is implemented for each tread. Unlike typical open riser stairs where carpet might wrap entirely around the tread, this method involves constructing a recessed area within the wooden tread to precisely fit the carpet and its underpad. This design ensures that the carpet sits flush with the top wood edge of the tread, allowing the exposed wood underneath to remain visible, preserving the aesthetic of open risers while adding the comfort and sound dampening of carpet. The visual effect is a continuous flow of wood with integrated carpet sections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t2gBL7-bXp8</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10235-2</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/udr7WnGM9m8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Nosing Dimensions and Plan Cuts — Carpet Stair Covers</video:title>
      <video:description>Begin by determining the desired dimensions for your stair nosing. The video creator prefers to make the entire nosing from a single piece of flooring to maintain consistent grain and texture. Decide on the overhang dimension and the thickness of the nosing; in this example, the overhang is 1 inch. Calculate the total width of the flooring needed by adding the flooring&apos;s existing width (3 1/8 inches), the overhang (1 inch), and the thickness of the material that will form the lower return (e.g., another 3/8 inch for a total of 4 1/2 inches). Ensure that the tongue and groove feature of your existing flooring is preserved so that the flooring tongue can be later inserted into the nosing&apos;s groove. If you plan to use the same flooring for the stair riser, remember to subtract its thickness from the lower return dimension of the nosing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/udr7WnGM9m8</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10235-3</loc>
    <lastmod>2026-09-18T14:28:09.891Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hOcPPO4LRfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Custom Tread Templates — Carpet Stair Covers</video:title>
      <video:description>New stair treads typically come as 1x12 red oak boards, ¾ inch thick and 11 ½ inches wide. Since these might be too wide, they need to be cut down from the back to maintain the pre-formed nosing on the front. Because the space between the skirt boards may not be perfectly square or parallel, a custom template is required for each tread. Begin by taking an old, cut-down tread that fits loosely in the opening and placing a piece of paper (or cardboard) on top. Mark a reference line on the riser. Then, use a small combination square or a piece of straight metal/wood as a guide to trace the contours of the skirt board onto the paper, keeping the guide tight against the skirt board. Slide the guide along the length of the paper, making continuous pencil lines at each end and several points in between, ensuring the lines are not bridged by any dips in the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hOcPPO4LRfI</video:player_loc>
      <video:duration>194</video:duration>
      <video:publication_date>2026-09-18T14:28:09.891Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10228-1</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U_qBttWNBfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Count Risers and Measure Tread Thickness — Stair Treads</video:title>
      <video:description>The presenter counts the number of existing risers (steps) from the top landing down to the bottom floor, noting each one. Then, he measures the thickness of one of the granite treads that will be installed on the stairs. He confirms that the staircase has 16 risers and that each granite tread has a thickness of 10.5 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U_qBttWNBfI</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10228-2</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oAUp2WuHH6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Number of Risers and Treads — Stair Treads</video:title>
      <video:description>Measure the total vertical distance (total rise) from the top of the lower floor (where the stairs begin) to the top of the upper floor (where the stairs end). For instance, if the measurement is 8 feet 9 inches (105 inches). Then, divide the total rise (in inches) by a desired individual riser height (e.g., 7 or 7.5 inches, common building code standards) to determine the number of risers. For example, 105 inches / 7.5 inches = 14 risers. Remember that the number of treads will be one less than the number of risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oAUp2WuHH6M</video:player_loc>
      <video:duration>232</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10228-3</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — Stair Treads</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10229-1</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10229-2</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10229-3</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Stair Treads</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10230-1</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Stair Treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10230-2</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10230-3</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Treads</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10231-1</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Optional Return Trim and Hide Nail Holes — Stair Treads</video:title>
      <video:description>If one or both sides of your stairs are exposed (not against a wall), you&apos;ll need to apply return trim for a proper finish. The return trim typically comes pre-mitered on one end. However, if your walls are not perfectly square, you may need to measure and cut the proper angle using an angle gauge and a miter saw. Once the trim is properly fitted and dry-fitted in place, attach it with a small amount of polyurethane construction adhesive and secure it with three finish nails. Finally, use matching wood putty to hide any visible nail holes for a seamless appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10231-2</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fUwSJ2G-XT0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understanding Tread Types and Nosing Concepts — Stair Treads</video:title>
      <video:description>The video begins by contrasting the installation of the first stair tread, which is cut flush with the skirt and later covered by a newel post, with subsequent treads. The focus shifts to explaining the concept of return nosing, where a separate piece of wood is added to the tread&apos;s edge to provide a finished look when it extends beyond the skirt board. The presenter illustrates how this nosing piece fits onto the tread, emphasizing that the overhang of the return nosing will match the overhang at the front of the tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fUwSJ2G-XT0</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10231-3</loc>
    <lastmod>2026-10-03T17:13:28.236Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ImruVU_Aj2g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Addressing Exposed Staircase Ends — Stair Treads</video:title>
      <video:description>If your staircase has one or both ends exposed (not enclosed by a wall), you&apos;ll need to consider how to finish the &apos;return&apos; of the stair. This often involves mitering the stair nose and adding a separate piece to create a finished side. For stairs with dramatic radius curves or floating steps (which lack risers and have all four sides visible), standard pre-made options may not be suitable. In such cases, custom-made solid wood pieces, shaped to fit the unique contours of your staircase, may be necessary. This significantly increases the complexity and cost of the project.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ImruVU_Aj2g</video:player_loc>
      <video:duration>115</video:duration>
      <video:publication_date>2026-10-03T17:13:28.236Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10224-1</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — Carpet Stair Covers</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10224-2</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Rise — Carpet Stair Covers</video:title>
      <video:description>The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10224-3</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Carpet Stair Covers</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10225-1</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SZSnefGtQic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim Excess Carpet and Prepare Final Riser — Carpet Stair Covers</video:title>
      <video:description>After stapling the second tread, the video demonstrates securing the nosing and then trimming the excess carpet for the third (and final, in this case) stair riser and the top landing. Begin by using a utility knife to cut away the excess carpet and underpad that extends past the top edge of the final riser. Then, use a tape measure and pencil to mark the desired cut line on the carpet underpad for the top riser. You&apos;ll mark both sides and use a straight edge to connect them. Carefully cut along these marked lines with a pair of sharp scissors or shears. The binding (the finished edge of the carpet) is never as tall as the pile itself, creating a &apos;kick&apos; that helps it fit snugly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SZSnefGtQic</video:player_loc>
      <video:duration>225</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10225-2</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SZSnefGtQic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Final Riser and Top Landing — Carpet Stair Covers</video:title>
      <video:description>With the carpet trimmed for the final riser, position it correctly. The &apos;kick&apos; from the shorter binding should help it fit snugly against the top landing. If the fit is too tight, pull the carpet out and shave an eighth of an inch off the trimmed edge with scissors. Once fit, secure the top edge of the riser with staples, splitting the pile. Then, use a carpet tucker to push any excess or loose fibers tightly into the gap between the riser and the wall, ensuring a clean, finished look. If any edges appear like they might fray, apply a small amount of hot melt glue to seal them. Finally, secure the runner to the top landing with additional staples, again ensuring the pile is split to conceal the staples. For angled cuts at the side, staple those edges firmly and tuck them in with the stair tool as well.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SZSnefGtQic</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10225-3</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/14uLw4eSzt0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Final Riser Piece — Carpet Stair Covers</video:title>
      <video:description>Test fit the newly cut riser piece to ensure it&apos;s the correct size and shape. Adjust accordingly with shears if necessary. Once satisfied with the fit, install the riser piece. First, apply a small amount of hot glue from a glue gun to the top edge of the riser piece on the backing side. Position the top edge of the riser piece flush with the top of the stair riser (underneath the stair nose of the step above). Secure this top edge with an electric staple gun, placing staples every inch or so. Next, use a carpet tucker tool to push the side edges of the riser piece firmly into the corners, concealing any exposed wood. Secure these side edges with the electric staple gun, placing three staples on each side, discreetly between the binding and the carpet pile. Finally, use the carpet tucker and hammer to press the bottom edge of the riser piece into the corner of the step below. Use the electric staple gun to place staples every inch or so along this bottom edge. Repeat for all remaining risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/14uLw4eSzt0</video:player_loc>
      <video:duration>118</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10226-1</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Carpet Stair Covers</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10226-2</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — Carpet Stair Covers</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10226-3</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Carpet Stair Covers</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10227-1</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Carpet Stair Covers</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10227-2</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — Carpet Stair Covers</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10227-3</loc>
    <lastmod>2026-11-18T01:52:02.190Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Carpet Stair Covers</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-18T01:52:02.190Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10220-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Rise — Landing Measurement</video:title>
      <video:description>The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10220-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — Landing Measurement</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10220-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Landing Measurement</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10221-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Landing Measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10221-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Landing Measurement</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10221-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — Landing Measurement</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10222-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Landing Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10222-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Landing Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10222-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Landing Measurement</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10223-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t2gBL7-bXp8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Construct Wood Tray for Carpet Inlay on Treads — Landing Measurement</video:title>
      <video:description>For open riser stairs with carpet inlays, a unique &apos;wood tray&apos; design is implemented for each tread. Unlike typical open riser stairs where carpet might wrap entirely around the tread, this method involves constructing a recessed area within the wooden tread to precisely fit the carpet and its underpad. This design ensures that the carpet sits flush with the top wood edge of the tread, allowing the exposed wood underneath to remain visible, preserving the aesthetic of open risers while adding the comfort and sound dampening of carpet. The visual effect is a continuous flow of wood with integrated carpet sections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t2gBL7-bXp8</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10223-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t2gBL7-bXp8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Integrate Oak Trim at Top Stair Riser — Landing Measurement</video:title>
      <video:description>At the top of the open riser staircase, an oak trim piece is added flush to the stringer. This creates a neat pocket for the carpet to tuck underneath, avoiding the need for a carpeted nosing, which can look bulky and wear out quickly. Additionally, a matching piece of oak wood trim is installed on the riser itself at the top, replacing what would typically be drywall. This choice significantly improves the durability of the riser, especially in a high-traffic area, and maintains a consistent aesthetic with the rest of the wooden stair components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t2gBL7-bXp8</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10223-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t2gBL7-bXp8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Design Hardwood Border for Carpeted Landing — Landing Measurement</video:title>
      <video:description>To maintain the cohesive aesthetic established on the stairs, the landing is also treated with a carpet inlay, but instead of running the carpet directly to the walls, a hardwood border is installed all the way around the perimeter of the landing. This border matches the wood used in the stair treads and stringers, extending the sophisticated &apos;carpet inlay&apos; look to the entire landing area. This design avoids the typical practice of having carpet go right up under the baseboard, which would break the visual continuity and the intentional design of the open riser staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t2gBL7-bXp8</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10216-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U_qBttWNBfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Count Risers and Measure Tread Thickness — stair treads</video:title>
      <video:description>The presenter counts the number of existing risers (steps) from the top landing down to the bottom floor, noting each one. Then, he measures the thickness of one of the granite treads that will be installed on the stairs. He confirms that the staircase has 16 risers and that each granite tread has a thickness of 10.5 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U_qBttWNBfI</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10216-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oAUp2WuHH6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Number of Risers and Treads — stair treads</video:title>
      <video:description>Measure the total vertical distance (total rise) from the top of the lower floor (where the stairs begin) to the top of the upper floor (where the stairs end). For instance, if the measurement is 8 feet 9 inches (105 inches). Then, divide the total rise (in inches) by a desired individual riser height (e.g., 7 or 7.5 inches, common building code standards) to determine the number of risers. For example, 105 inches / 7.5 inches = 14 risers. Remember that the number of treads will be one less than the number of risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oAUp2WuHH6M</video:player_loc>
      <video:duration>232</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10216-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — stair treads</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10217-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — stair treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10217-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — stair treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10217-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — stair treads</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10218-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nCu4uIwBOOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Stairs — stair treads</video:title>
      <video:description>To ensure the carpet runner is long and wide enough, accurate measurements are essential. First, select one stair tread (the horizontal top surface of a step) and measure its depth. Next, measure the height of the riser (the vertical part of the step). Multiply the height by the number of risers and the depth by the number of treads on your staircase. Add these two sums together, then add an additional 6 to 8 inches to account for waste. This total will be the required length of the runner. If using more than one runner, add an additional 12 inches to the total length to account for seams where the two carpet pieces will join. If your staircase includes a landing and you plan to install the runner there, ensure you include the landing area in your measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nCu4uIwBOOE</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10218-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — stair treads</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10218-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c7jak2TlfDA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Bullnose Stair — stair treads</video:title>
      <video:description>Begin by measuring the total length and width of the bullnose stair. First, measure from the inside corner of the wall around the bullnose curve to the outer corner, bending the tape measure around the nose. This measurement is 28 inches. Next, measure the length of the entire stair, wrapping the tape measure along the base where the carpet will be installed. This measurement is 57 inches. Finally, measure the width of the stair tread, which is 29 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c7jak2TlfDA</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10210-1</loc>
    <lastmod>2026-11-13T06:47:01.266Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U_qBttWNBfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Count Risers and Measure Tread Thickness — Stair Tread Measurement</video:title>
      <video:description>The presenter counts the number of existing risers (steps) from the top landing down to the bottom floor, noting each one. Then, he measures the thickness of one of the granite treads that will be installed on the stairs. He confirms that the staircase has 16 risers and that each granite tread has a thickness of 10.5 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U_qBttWNBfI</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-13T06:47:01.266Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10210-2</loc>
    <lastmod>2026-11-13T06:47:01.266Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Stair Tread Measurement</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-11-13T06:47:01.266Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10210-3</loc>
    <lastmod>2026-11-13T06:47:01.266Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oAUp2WuHH6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Number of Risers and Treads — Stair Tread Measurement</video:title>
      <video:description>Measure the total vertical distance (total rise) from the top of the lower floor (where the stairs begin) to the top of the upper floor (where the stairs end). For instance, if the measurement is 8 feet 9 inches (105 inches). Then, divide the total rise (in inches) by a desired individual riser height (e.g., 7 or 7.5 inches, common building code standards) to determine the number of risers. For example, 105 inches / 7.5 inches = 14 risers. Remember that the number of treads will be one less than the number of risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oAUp2WuHH6M</video:player_loc>
      <video:duration>232</video:duration>
      <video:publication_date>2026-11-13T06:47:01.266Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10206-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — Stair Treads</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10206-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Rise — Stair Treads</video:title>
      <video:description>The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10206-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Stair Treads</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10207-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Treads</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10207-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10207-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Stair Treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10208-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Treads</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10208-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10208-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Stair Treads</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10205-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Stair Covers</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10205-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9OF3FBDsqcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stair Treads to Steps — Stair Covers</video:title>
      <video:description>With the treads unpacked, carefully position one stair tread onto the surface of a stair. Ensure it is centered and aligned properly. Once placed, firmly press down on the entire surface of the tread with your hands to activate the adhesive backing and secure it to the stair. Repeat this process for each step, ensuring consistent placement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9OF3FBDsqcs</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10205-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10204-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — Stair Covers</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10204-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10204-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Stair Covers</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10202-1</loc>
    <lastmod>2026-11-19T07:42:12.716Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — Carpet Stair Covers</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-19T07:42:12.716Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10202-2</loc>
    <lastmod>2026-11-19T07:42:12.716Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-19T07:42:12.716Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10202-3</loc>
    <lastmod>2026-11-19T07:42:12.716Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Carpet Stair Covers</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-19T07:42:12.716Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10203-1</loc>
    <lastmod>2026-11-19T07:42:12.716Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Carpet Stair Covers</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-19T07:42:12.716Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10203-2</loc>
    <lastmod>2026-11-19T07:42:12.716Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Carpet Stair Covers</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-19T07:42:12.716Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10203-3</loc>
    <lastmod>2026-11-19T07:42:12.716Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-19T07:42:12.716Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10198-1</loc>
    <lastmod>2026-11-16T07:33:55.070Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-16T07:33:55.070Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10198-2</loc>
    <lastmod>2026-11-16T07:33:55.070Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Stair Tread Measurement</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-16T07:33:55.070Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10198-3</loc>
    <lastmod>2026-11-16T07:33:55.070Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Rise — Stair Tread Measurement</video:title>
      <video:description>The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-16T07:33:55.070Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10199-1</loc>
    <lastmod>2026-11-16T07:33:55.070Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-16T07:33:55.070Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10199-2</loc>
    <lastmod>2026-11-16T07:33:55.070Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Tread Width with Nosing and Laminate — Stair Tread Measurement</video:title>
      <video:description>To establish the correct overall width for the laminate pieces, begin by dry-fitting a piece of the laminate stair nosing against the existing stair edge. Then, position a full laminate board directly behind it, making sure it sits flush against the back edge of the nosing. This combination determines the total required depth of the new tread, helping to accurately account for the nosing&apos;s unique profile. Use a pencil to mark where the full laminate board ends, indicating the necessary width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-16T07:33:55.070Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10199-3</loc>
    <lastmod>2026-11-16T07:33:55.070Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — Stair Tread Measurement</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-16T07:33:55.070Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10200-1</loc>
    <lastmod>2026-11-16T07:33:55.070Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-16T07:33:55.070Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10200-2</loc>
    <lastmod>2026-11-16T07:33:55.070Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-16T07:33:55.070Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10200-3</loc>
    <lastmod>2026-11-16T07:33:55.070Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-16T07:33:55.070Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10196-1</loc>
    <lastmod>2026-11-17T23:42:56.647Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — Carpet Stair Covers</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-17T23:42:56.647Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10196-2</loc>
    <lastmod>2026-11-17T23:42:56.647Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Carpet Stair Covers</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-17T23:42:56.647Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10196-3</loc>
    <lastmod>2026-11-17T23:42:56.647Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-17T23:42:56.647Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10197-1</loc>
    <lastmod>2026-11-17T23:42:56.647Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Carpet Stair Covers</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-17T23:42:56.647Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10197-2</loc>
    <lastmod>2026-11-17T23:42:56.647Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Carpet Stair Covers</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-17T23:42:56.647Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10197-3</loc>
    <lastmod>2026-11-17T23:42:56.647Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-17T23:42:56.647Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10188-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/udr7WnGM9m8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cure and Remove Tape — Stair Treads</video:title>
      <video:description>Allow the glued nosing to cure completely. The curing time will vary depending on the type of wood glue used; for standard wood glue, a curing period of approximately 24 hours is recommended. Once the glue has fully cured and dried, carefully remove all the masking tape from the nosing. You should now have a near-perfect, seamlessly joined stair nosing with matching wood grain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/udr7WnGM9m8</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10188-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XF5qIw-yOMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Glue to Cure and Plan Reinforcement — Stair Treads</video:title>
      <video:description>Allow the wood glue to fully cure while the step remains securely clamped. The presenter suggests a curing time of &apos;a few days&apos; for optimal strength. Once the glue is completely dry and strong, carefully remove all clamps, brackets, and screws. Inspect the step to ensure it is now level and firmly re-bonded. The presenter notes that for high-traffic areas, further reinforcement (such as drilling and inserting rods through the step) may be considered to prevent future issues, although this additional step is not detailed in this video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XF5qIw-yOMY</video:player_loc>
      <video:duration>150</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10188-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Project Completion — Stair Treads</video:title>
      <video:description>Once all installation steps are complete, including securing risers, treads, and optional return trim, and after allowing the adhesive to fully dry (typically 24 to 48 hours), your beautiful new stairs are ready to use. Enjoy your newly updated staircase for years to come!</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10186-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10186-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — Stair Treads</video:title>
      <video:description>Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10186-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Cut Your Treads — Stair Treads</video:title>
      <video:description>With the nosing removed, prepare the replacement treads for installation. Begin by measuring each tread individually using a tape measure, as stairway widths can vary from one step to the next. Mark the length that needs to be cut off using a sharpie or pencil. If the tread is a double return tread, you will not need to make any further cuts as it has been manufactured to your provided dimensions. As a pro tip, use a piece of scrap wood to push the tread out at the return area. This allows you to properly scribe the skirt before cutting, which will help give you an exact fit and cut for your tread. Use a miter saw to make the necessary cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10189-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fTh9RuhZAtY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill and Sand Wood Surfaces — Stair Treads</video:title>
      <video:description>After all treads and risers are installed, use wood filler to fill in any gaps, nail holes, or imperfections. The video creator used a small metal putty knife for precise application in corners and used her finger for nail holes. Allow the wood filler to dry completely according to manufacturer instructions. Once dry, sand all surfaces of the stair treads smooth. Pay particular attention to the areas with wood filler and any rough edges. The creator used a Ryobi multi-oscillating tool with a sanding attachment for tight corners and a standard sander for the main surfaces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fTh9RuhZAtY</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10189-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill Gaps and Nail Holes — Stair Treads</video:title>
      <video:description>After securing the new stair treads, use wood filler to address any imperfections. Apply wood filler to fill any gaps visible on the sides of the treads where they meet the stringers or walls. For these areas, a small metal putty knife is ideal for precise application and smoothing. For the nail holes created by the nail gun, you can simply use your finger to apply and smooth the wood filler, as it allows for better control in small depressions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10189-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bcNiJWXS-nI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Wood Filler and Sand — Stair Treads</video:title>
      <video:description>After structural repairs, wood filler is applied to all holes, cracks, and imperfections on the treads, risers, and railings. A putty knife or similar tool is used to spread the wood filler smoothly and evenly. Once the filler is dry, a sanding block is used for the banisters and risers, and an orbital palm sander is used for the flat stair treads to achieve a smooth finish, removing any excess filler and preparing the wood for painting and staining.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bcNiJWXS-nI</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10192-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fgKYII9TM7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Wood Glue — Stair Treads</video:title>
      <video:description>Apply a generous, continuous bead of wood glue along the top edges of the exposed stair stringers and the riser where the new stair tread will sit. Ensure even coverage to maximize adhesion and help prevent future squeaks. The video clearly shows a bottle of Titebond brand wood glue being used for this purpose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fgKYII9TM7E</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10192-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Construction Adhesive to Stair Treads — Stair Treads</video:title>
      <video:description>Once you have confirmed that all laminate pieces fit perfectly during the dry-fit, remove them from the stair tread. Then, using a caulk gun, apply a generous amount of construction adhesive to the entire surface of the existing stair tread. Distribute the adhesive in a wavy or serpentine pattern to ensure good coverage. Pay particular attention to the edges and the area where the nosing will sit, as these areas require a strong bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10192-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Hardwood Treads — Stair Treads</video:title>
      <video:description>Apply a generous amount of construction wood adhesive onto each old stair tread, creating a strong bond. Carefully place the newly cut hardwood tread over the old one, aligning it precisely. Step and stand on the newly installed tread to apply pressure and ensure good adhesion with the construction adhesive. Repeat this process for all stair treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10193-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Treads — Stair Treads</video:title>
      <video:description>After the risers are installed, measure the depth and length of each individual stair tread. According to these measurements, cut your new hardwood treads. It&apos;s crucial to be accurate, as even small errors can lead to visible gaps. You may need to make slight adjustments to ensure a gap-free fit. A track saw, set at a 5-degree angle as demonstrated, can be particularly useful for making precise, straight cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10193-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wOGeyg9Vqm8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Lumber — Stair Treads</video:title>
      <video:description>After removing the old treads, measure their exact length to ensure the new ones are cut to fit perfectly. The narrator measures his old steps to be 57 inches long. Transfer this measurement to the new pressure-treated lumber. Use a square and a pencil to draw a straight, accurate cut line across the board. Then, use a circular saw to cut the new boards to the marked length.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wOGeyg9Vqm8</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10193-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FiZr2ZStfiY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim Edges with Miter/Chop Saw — Stair Treads</video:title>
      <video:description>Once the vinyl planks and tread noses are cut to their approximate lengths, a miter saw or chop saw is ideal for trimming off the ends. This allows for precise, clean cross-cuts, ensuring that the components fit snugly against walls or other stair elements. This step is crucial for achieving a professional and finished look for each stair component.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FiZr2ZStfiY</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10194-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit and Adjust Treads — Stair Treads</video:title>
      <video:description>Once a new stair tread has been cut, take it inside and test its fit on the corresponding stair. Place it gently into position to check for proper length and alignment. The presenter found that some of her cuts, made conservatively, were still slightly too long. If a tread doesn&apos;t fit perfectly, take it back to your cutting area and trim off just a tiny bit more to achieve a snug fit, then re-test.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10194-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fit Tread and Nosing — Stair Treads</video:title>
      <video:description>Once the stair tread and nosing pieces are cut, bring them back to the stairs for a dry fit. Place them into their final positions without adhesive to ensure all cuts are perfect and the pieces fit snugly against the riser and along the stair&apos;s edges. Make any necessary micro-adjustments at this stage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10194-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Treads and Secure with Shims/Glue/Nails — Stair Treads</video:title>
      <video:description>Before permanent installation, dry-fit each new tread and riser combination. Check everywhere for a good, tight fit and minimal gaps. While tiny gaps can be filled later, strive for as few as possible to avoid relying on excessive filler. To ensure a gap-free fit at the bottom of the tread against the previous riser, place cardboard shims at the top of the newly installed riser. Apply a generous amount of strong construction adhesive (like PL Premium) to the underside of the new tread, then press it firmly down onto the existing tread and against the riser. Use a nail gun to secure the tread in place by firing nails into the tread and riser.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10195-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hVs1YaoZyKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure New Treads with Screws — Stair Treads</video:title>
      <video:description>Once the adhesive is applied, place the new tread onto the stringers, pushing it down firmly into the bead of adhesive. Ensure there is a small 1/8-inch gap between the new tread and any adjacent boards for proper expansion and drainage. For fasteners, always use screws rather than nails, as they provide a much tighter and more durable hold. Specifically, use 2.5-inch exterior-grade screws. Using a Hitachi drill, pre-drill pilot holes with an 1/8-inch bit, carefully lining them up with the center of the stringer to prevent splitting the wood. Then, use a DeWalt impact driver to drive the screws in, countersinking the head slightly so it&apos;s flush or just below the surface of the tread. For the front edge of the board, where the stringer&apos;s wood grain might be weak or &apos;sketchy,&apos; it is often better to put a screw down into the riser below instead of directly into the stringer end. Line it up by eye, pre-drill with the 1/8-inch bit, and then drive the screw in with the impact driver, countersinking it as before. Repeat this fastening process for each stringer contact point and for the front edge of each new tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hVs1YaoZyKA</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10195-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure New Stair Treads — Stair Treads</video:title>
      <video:description>To permanently secure the new stair treads, first apply an adhesive like liquid nails to the stair stringers (the support beams) where the tread will rest. Use a caulk gun to apply an even bead of the adhesive. Then, carefully place the new tread onto the stringers, ensuring it is flush and properly aligned. Finally, use a nail gun to fasten the tread securely by driving nails into the sides of the stair structure, typically into the stringers and risers, creating a strong bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10195-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Your Treads — Stair Treads</video:title>
      <video:description>In some cases, you may need to install risers before installing your new treads. If this is the case, use construction adhesive and finish nails to secure them. After this, install the treads by applying construction adhesive on the top and front of the nosing of the sub-treads of the stairs. Then, use 1 1/2-inch finish nails with a finish nailer to attach the replacement treads securely. Repeat this step for each of your treads, working your way up the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10187-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bTgWpOVv9-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up Excess Glue — Stair Treads</video:title>
      <video:description>Immediately after inserting the dowels and while the glue is still wet, use a dry rag to wipe away any excess wood glue that squeezes out from around the dowel and joint line. Cleaning up the squeeze-out quickly will prevent it from drying on the wood surface, which can be difficult to remove later and can affect the final finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bTgWpOVv9-M</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10187-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ye6IF7RQDIQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up Excess Glue — Stair Treads</video:title>
      <video:description>After the frame is clamped, use a wet paper towel and a flat screwdriver to clean up any excess wood glue, especially from the inside corners of the frame. The top and outside edges can be cleaned later with sanding, but the inside corners are harder to reach once the glue dries. Rotate the wet paper towel frequently to expose a clean surface, ensuring all glue is thoroughly wiped away. This proactive cleanup will save significant time and effort during the finishing stages. Once the frame is cleaned, place the tools back in their designated storage areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ye6IF7RQDIQ</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10187-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ArPIfak86m0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up Excess Glue — Stair Treads</video:title>
      <video:description>After all the wooden pieces are securely joined and screwed, there may be some excess wood glue that has squeezed out from the joint lines. Carefully wipe away this excess glue using a finger. Removing wet glue ensures a cleaner aesthetic finish, particularly important if the wood will be stained or varnished later, as dried glue can prevent finishes from adhering properly to the wood surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ArPIfak86m0</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10191-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eDqpjjl0laE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Finish — Stair Treads</video:title>
      <video:description>After the stain has dried, apply a couple of coats of an outdoor-rated finish. The host recommends using Spar Urethane, explaining it&apos;s also used on boats for its durability. Apply the finish with a brush using long, smooth motions. Avoid short, choppy strokes as this can lead to visible brush marks. Allow plenty of time for the finish to cure according to product instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eDqpjjl0laE</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10191-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OtHhuSgkV98/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Finish — Stair Treads</video:title>
      <video:description>To protect the wood and further enhance its appearance, apply a clear protective finish. The creator uses Minwax Fast-Drying Polyurethane in Clear Satin, an oil-based finish. Apply the polyurethane evenly with a brush over all surfaces of the stained wood. This will seal the wood, provide durability, and add a subtle sheen that brings out the depth of the distressing and the richness of the stain. Allow adequate drying time between coats and before handling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OtHhuSgkV98</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10191-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fgtkpa7z_Oc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Finish — Stair Treads</video:title>
      <video:description>After any epoxy work and final sanding, thoroughly wipe down the entire wooden plank with a clean cloth, possibly dampened with mineral spirits or denatured alcohol, to remove all sanding dust and debris. Once clean and dry, apply a high-quality outdoor-grade protective finish, such as tung oil, spar varnish, or a marine-grade sealer. The video shows a wipe-on application. Apply the finish evenly, following the manufacturer&apos;s instructions for coats and drying times, to protect the wood from weathering, moisture, and UV damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fgtkpa7z_Oc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10190-1</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BpHGw0Qkeb8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand the Filled Joint Smooth — Stair Treads</video:title>
      <video:description>After the glue-sawdust mixture has fully dried (which typically takes a few minutes, depending on the glue and environmental conditions), use fine-grit sandpaper to sand the filled area. Start with a medium-fine grit (e.g., 180-220 grit) to smooth any raised areas, then finish with a finer grit (e.g., 220-320 grit) to achieve a perfectly smooth, flush surface that blends seamlessly with the surrounding wood. Wipe away any remaining dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BpHGw0Qkeb8</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10190-2</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/udkkWdYPNrw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand All Filled Areas (Pre-Finish) — Stair Treads</video:title>
      <video:description>Once all applied wood fillers are completely cured (dry), use an orbital sander with 180-grit sandpaper to sand down all the filled areas. Sand until the filler is flush with the surrounding wood surface and feels smooth to the touch. This step prepares the wood for finishing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/udkkWdYPNrw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10190-3</loc>
    <lastmod>2026-11-16T00:00:02.603Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hjp4zmjB1Tw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Smooth Repaired Surfaces — Stair Treads</video:title>
      <video:description>Once the wood filler or epoxy has fully cured, the repaired areas must be sanded to achieve a smooth, seamless surface. Use an orbital sander, starting with a medium-grit sandpaper (e.g., 80-120 grit) to remove excess filler and level the surface. Progress to a finer grit (e.g., 180-220 grit) to achieve a perfectly smooth finish that is flush with the original wood and ready for painting. This step is crucial for eliminating any visible ridges or imperfections from the repair, ensuring a professional final appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hjp4zmjB1Tw</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-16T00:00:02.603Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10180-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LBeZYCH5iwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount TV to Wall — Wall-Mounted Television Installation</video:title>
      <video:description>With the wall mount installed and the TV-side brackets attached, it&apos;s time to mount the TV. This step usually requires two people due to the size and weight of flat screen TVs, especially larger models. Carefully lift the TV, aligning the brackets on the back of the TV with the wall mount. Gently hook or slide the TV into place, following the specific instructions for your mount type. Once the TV is on the mount, make sure it is securely seated and locked into position. Many mounts have safety latches, tightening screws, or pull strings that need to be engaged to prevent the TV from accidentally coming off the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LBeZYCH5iwQ</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10180-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6VqE8dwlJUo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang TV onto Mount — Wall-Mounted Television Installation</video:title>
      <video:description>With the wall bracket securely in place, it&apos;s time to hang the TV. This step often requires two people due to the size and weight of modern televisions. Carefully lift the TV, aligning the brackets on the back of the TV with the arms of the wall mount. Guide the TV onto the mount, ensuring that the brackets engage properly. Once the TV is hung, secure it to the mount using the locking mechanisms or screws provided with your specific TV mount. The video shows tightening a bolt on the horizontal bracket using a socket wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6VqE8dwlJUo</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10180-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y0MBMDXFQE0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the TV — Wall-Mounted Television Installation</video:title>
      <video:description>With a helper, carefully lift the TV. Align the tapered end of the TV bracket (which was pre-assembled onto the TV) with the hook on the articulating arm. Gently lower the TV until the bracket hooks securely into the arm. Once the TV is hanging, insert and tighten any locking screws at the bottom of the TV bracket to prevent accidental removal and ensure it is firmly attached to the articulating arm. The TV is now securely mounted to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y0MBMDXFQE0</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10181-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6VqE8dwlJUo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Adjustments and Cable Management — Wall-Mounted Television Installation</video:title>
      <video:description>Once the TV is hung and initially secured, make final adjustments. Use a level to ensure the TV is perfectly horizontal. You can then use the mount&apos;s fine adjustments to pan, swivel, or tilt the TV to achieve the optimal viewing angle in your room. If your mount includes cable management clips, route your cables through them for a clean and organized look, concealing them behind the TV and mount. After all adjustments are complete and you are satisfied with the positioning, fully tighten all securing nuts and bolts on the mount using a socket set to lock the TV into its final position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6VqE8dwlJUo</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10181-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cEiCEPcqMzY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang TV, Secure, Adjust Tilt, and Manage Cords — Wall-Mounted Television Installation</video:title>
      <video:description>With a helper (recommended, as the TV is heavy), carefully lift the TV. Align the hooks on the top of the TV mounting rails with the top rail of the wall mount assembly. Gently lower the TV until the hooks securely engage the top rail. Then, identify the small screws at the bottom of the TV mounting rails (which may not be visible on camera but are present). Use a screwdriver (e.g., Philips head from the kit) to tighten these screws onto the wall mount&apos;s rail, securing the TV to prevent accidental dislodgement. Adjust the TV&apos;s tilt to your desired viewing angle by loosening a knob on the mount&apos;s arm, setting the angle, and then tightening the knob to lock it in place. Before finalizing the TV&apos;s position, it is recommended to manage all necessary cords and cables (e.g., HDMI, coax, power) by plugging them into the TV while it&apos;s still accessible. Finally, gently swivel the TV into its final desired position in the corner.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cEiCEPcqMzY</video:player_loc>
      <video:duration>128</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10181-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Qwk1rER_EFM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cable Management and Final Adjustments — Wall-Mounted Television Installation</video:title>
      <video:description>After the TV is securely mounted and powered, route any remaining cables (like HDMI or data cables, if applicable, although the presenter suggests using a smart TV to minimize these) neatly along the articulating bracket. Use cable ties or Velcro straps to bundle and secure the cables to the bracket arms, ensuring they do not get pinched or interfere with the TV&apos;s movement. Finally, perform a test to adjust the TV&apos;s position and angle as needed. The presenter notes the unique articulating bracket allows the TV to be easily adjusted to face different directions in the room. Enjoy your newly mounted TV with a clean, cable-free appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Qwk1rER_EFM</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10183-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cuI0_0Bb7ic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-Drill Pilot Holes — Wall-Mounted Television Installation</video:title>
      <video:description>Using the previously marked pilot hole locations (on the studs), take your drill and the appropriate 3/16 inch or 7/32 inch drill bit. Carefully pre-drill a pilot hole at each marked location. It&apos;s crucial to use a drill bit that is slightly smaller than the lag screws you will be using. This allows the lag screws to tightly grip the wood of the studs, ensuring a secure mount. Before drilling, check the other side of the wall for any obstructions or electrical wires. If an electrical wire is present, it should ideally be protected by a metal plate behind the drywall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cuI0_0Bb7ic</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10183-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LBeZYCH5iwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wall Mount — Wall-Mounted Television Installation</video:title>
      <video:description>With the pilot holes marked, use a drill (e.g., RYOBI) with an appropriate drill bit to create pilot holes into the center of the studs. The video shows a person wearing safety glasses while drilling, which is important for eye protection. Once the pilot holes are drilled to the correct depth, position the TV wall mount bracket against the wall, aligning its screw holes with the freshly drilled pilot holes. Then, use the drill to drive the mounting screws (typically lag bolts provided with the mount) securely into the pilot holes. Tighten them firmly but avoid over-tightening to prevent stripping the wood or damaging the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LBeZYCH5iwQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10183-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hN7HX_X8rhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install TV Wall Mount (Part 1) — Wall-Mounted Television Installation</video:title>
      <video:description>Align the TV wall mount with the marked stud locations. Using a DeWalt cordless drill, drill pilot holes through the mount&apos;s designated screw holes and into the center of the wall studs. Hold a dustpan below the drilling area to catch any drywall or wood debris. Once pilot holes are drilled, secure the wall mount to the studs using the provided lag screws and the cordless drill. Ensure the mount is firmly attached to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hN7HX_X8rhE</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10184-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LBeZYCH5iwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Studs and Mark Pilot Holes — Wall-Mounted Television Installation</video:title>
      <video:description>After deciding on the TV&apos;s position, use a stud finder (e.g., RYOBI) to locate the wall studs behind the chosen area. Run the stud finder horizontally along the wall, marking the edges and center of each stud with a pencil. This is crucial for securely mounting the TV to the structural framing of your wall. Once the stud locations are accurately marked, hold the TV wall mount bracket against the wall at the desired height, aligning it with the marked stud centers. Use a level (e.g., Husky 24-inch) to ensure the bracket is perfectly horizontal, then mark the exact spots for drilling pilot holes through the mount&apos;s designated screw holes into the center of the studs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LBeZYCH5iwQ</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10184-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hN7HX_X8rhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Wall Studs — Wall-Mounted Television Installation</video:title>
      <video:description>Begin by removing any existing TV or furniture from the wall. Then, use a stud finder, specifically a Zircon Edge Finding stud finder as shown in the video, to locate the wooden studs within the wall. Once a stud is detected, mark its edges with a pencil directly on the wall or on a piece of painter&apos;s tape placed horizontally on the wall. This ensures accurate placement of the TV mount&apos;s lag screws, providing a secure anchor point.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hN7HX_X8rhE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10184-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U6KBfh_Bimw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Mark Wall Studs — Wall-Mounted Television Installation</video:title>
      <video:description>After marking the approximate top center of where the wall mount will go, use a stud finder to precisely locate the vertical wooden studs behind the drywall. It is crucial to mount heavy items like TVs (or safes) directly into these studs for maximum security and load-bearing capacity. Scan the area around your marked point horizontally to find the edges of the stud, then mark the center. Some modern homes may have studs spaced 24 inches apart, while older homes commonly use 16-inch spacing. Confirm the spacing as this will affect how many studs your wall mount can attach to.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U6KBfh_Bimw</video:player_loc>
      <video:duration>101</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10178-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LBeZYCH5iwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Select TV Mount — Wall-Mounted Television Installation</video:title>
      <video:description>The video begins by listing the essential tools needed for mounting a flat screen TV: a drill, a stud finder, a screwdriver, a pencil, and a level. It then shows two common types of TV mounts – a standard mount and an adjustable swivel mount – indicating that the choice depends on desired functionality and viewing angles. Ensure your selected mount is compatible with your TV&apos;s size and weight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LBeZYCH5iwQ</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10178-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y0MBMDXFQE0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the TV &amp; the Mount — Wall-Mounted Television Installation</video:title>
      <video:description>Begin by unboxing both your television and the TV wall mount kit. If your television has a stand, legs, or feet, carefully remove them as they will not be needed for wall mounting. Familiarize yourself with the components of your specific TV mount; the presenter uses a Sanus full-motion TV wall mount that fits TVs from 37&quot;-90&quot; and supports up to 135 pounds, extending 26 inches from the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y0MBMDXFQE0</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10178-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaYg_px029o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Wall Mount Placement — Wall-Mounted Television Installation</video:title>
      <video:description>With the brackets now on the TV, temporarily position the main wall mount onto these brackets. This simulates the TV being mounted. Then, measure the vertical distance from the top edge of the TV to the top edge of the rear plate of the wall mount (the part that bolts to the wall). Additionally, consider the thickness of any skirting board at the base of the wall to ensure the TV will sit flush. This measurement is crucial for marking the precise installation height of the wall mount on the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaYg_px029o</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10182-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MQ2O7c8BSDY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Wall Plate Positions — Wall-Mounted Television Installation</video:title>
      <video:description>The presenter re-measures the height of the dresser (34 inches). He then adds 4 inches to this measurement (for typical TV stand clearance), resulting in 38 inches for the bottom of the TV. From the previous step, he knows the hooks on the TV arms are 19 inches from the bottom of the TV. So, he marks 38 + 19 = 57 inches from the floor for the top of the wall plate. He holds the wall plate against the wall at the marked height and uses a level (both the built-in one on the mount and a separate hand level) to ensure it&apos;s perfectly horizontal. He then marks the drilling points for both the stud side and the drywall side of the mount with a pencil, circling the holes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MQ2O7c8BSDY</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10182-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaYg_px029o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Wall Mount Top Edge — Wall-Mounted Television Installation</video:title>
      <video:description>Using the previously determined measurement (from the top of the TV to the top of the wall mount&apos;s rear plate) and the desired TV height, mark the precise location for the top edge of the wall mount&apos;s rear plate on the wall. Draw a horizontal line at this height. Then, using the earlier stud/dwang markings, draw a vertical line through the center of the stud that intersects the horizontal line. This intersection marks the central top point for the wall mount.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaYg_px029o</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10182-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XX26zp2N-vI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Wall Mount Position — Wall-Mounted Television Installation</video:title>
      <video:description>Position the wall mount bracket against the wall, aligning it with the marked stud locations. Use a level to ensure the bracket is perfectly horizontal. Once aligned and level, mark the precise points on the wall where the screws will go, making sure they correspond to the holes in the bracket and the previously located studs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XX26zp2N-vI</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10185-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cuI0_0Bb7ic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Level Check and Tighten Wall Mount — Wall-Mounted Television Installation</video:title>
      <video:description>After securing the wall mount with slightly loose lag screws, use a level to ensure the mount is perfectly horizontal. Adjust the mount as needed by tapping it gently until the level indicates it is perfectly straight. Once level, fully tighten all the lag screws using your drill/impact driver or socket wrench. It&apos;s important to tighten them securely to prevent any movement. Clean up any dust or debris from drilling with a vacuum cleaner. The wall mount should now be firmly attached and level, ready for the TV.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cuI0_0Bb7ic</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10185-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cEiCEPcqMzY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wall Plate and Secure Bolts — Wall-Mounted Television Installation</video:title>
      <video:description>Position the main mounting arm assembly against the pre-drilled holes in the wall. The presenter suggests holding the heavy mount on a shoulder, but a second person or a temporary support would be highly beneficial. Insert the lag bolts into the pre-drilled holes through the mount. Partially drive the bolts using the power drill. Once all bolts are partially in, verify that the mount is level using the built-in level on the mount itself. Once leveled, fully tighten all lag bolts using a socket wrench to ensure the mount is extremely secure to the wall studs. This model&apos;s heavy-duty design requires robust fastening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cEiCEPcqMzY</video:player_loc>
      <video:duration>121</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10185-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qogvfyw_9dw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Wall Mount Arms — Wall-Mounted Television Installation</video:title>
      <video:description>Take the main wall mount arm assembly. You will be using six lag bolts for this installation (more are provided for masonry or brick, which is not covered in this guide). To make installation easier, you can support the mount on your shoulder. Align the mount with the pre-drilled pilot holes. Insert one lag bolt loosely into a pilot hole using a power drill or driver. Then, insert the remaining lag bolts loosely into their respective pilot holes. Once all six bolts are in place, use a level on the mount to ensure it is perfectly horizontal. After confirming it&apos;s level, proceed to tighten all six lag bolts securely into the wall using the power drill/driver, but do not overtighten until all are snug. The mount should now be very secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qogvfyw_9dw</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10179-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y0MBMDXFQE0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-assemble Mount to TV — Wall-Mounted Television Installation</video:title>
      <video:description>To simplify the final mounting process, temporarily pre-assemble the TV bracket (the part that attaches to the TV) and the articulating arm to the back of the TV. Consult your mount&apos;s instructions for specific assembly steps. The mount kit typically comes with a large assortment of screws and spacers. To select the correct screw length for the TV, gently thread a screw into a mounting hole on the TV; it should bottom out without applying pressure to the TV screen itself. If it feels too long, causing pressure or potentially puncturing the screen, use a shorter screw or a spacer from the kit. The presenter demonstrates using a short screw with a screwdriver to secure the bracket rails to the TV&apos;s VESA mounting points. Then, attach the articulating arm to these rails. Once assembled, measure the distance from the top edge of the TV to the top mounting hole on the arm (e.g., 17 inches) and from the bottom edge of the TV to the bottom mounting hole (e.g., 3.5 inches). These measurements will be crucial for positioning the wall mount correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y0MBMDXFQE0</video:player_loc>
      <video:duration>130</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10179-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cuI0_0Bb7ic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Brackets to the TV — Wall-Mounted Television Installation</video:title>
      <video:description>Unbox your TV and the TV wall mount. The mount typically includes two main components: brackets that attach to the TV and a main bracket that attaches to the wall. Begin by attaching the smaller brackets directly to the back of the TV. Use the screws provided with your TV wall mount that are compatible with your specific TV&apos;s screw holes. If necessary, use washers to space them out. Once aligned, hand-tighten the screws into the TV&apos;s VESA mounting holes, then use a Phillips head screwdriver to securely tighten them. Ensure they are nice and tight so the brackets will not fall off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cuI0_0Bb7ic</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10179-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6DpuvKG10KA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Monitor Brackets to TV — Wall-Mounted Television Installation</video:title>
      <video:description>Begin by attaching the monitor brackets, which are part of the SANUS mounting kit, to the back of your flat-panel TV. Locate the four mounting holes on the back of the TV. Select the appropriate diameter of bolts from the included hardware that are compatible with your TV&apos;s mounting holes. If you are unsure which mounting holes or bolt size to use, consult your television&apos;s manual. Choose a bolt length that is neither too long nor too short for a secure fit. If there are any obstructions on the back of the TV, such as uneven surfaces, or if you need additional space for cables, use the provided spacers to create extra room between the TV and the mount. Securely tighten the bolts, ensuring the brackets are firmly attached.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6DpuvKG10KA</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10177-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Carpet Stair Covers Installation</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10177-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Carpet Stair Covers Installation</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10177-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Carpet Stair Covers Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10176-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — Carpet Stair Covers Installation</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10176-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Covers Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10176-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZrWNkbh5j4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Treads with Adhesive — Carpet Stair Covers Installation</video:title>
      <video:description>Take one carpet tread and flip it over to expose the underside. Unroll the double-sided carpet tape (such as X-Fasten brand) and carefully apply two parallel strips along the long edges of the tread&apos;s underside. As you apply, peel off the protective backing from the tape. Use a utility knife (like a DeWalt brand) to cleanly cut the tape once each strip is fully applied.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZrWNkbh5j4M</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10174-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — Carpet Stair Covers</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10174-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Carpet Stair Covers</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10174-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10175-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Carpet Stair Covers</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10175-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Carpet Stair Covers</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10175-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Covers</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10169-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10169-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Treads — Stair Tread Measurement</video:title>
      <video:description>After the risers are installed, measure the depth and length of each individual stair tread. According to these measurements, cut your new hardwood treads. It&apos;s crucial to be accurate, as even small errors can lead to visible gaps. You may need to make slight adjustments to ensure a gap-free fit. A track saw, set at a 5-degree angle as demonstrated, can be particularly useful for making precise, straight cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10169-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10168-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10168-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10168-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10170-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ubEN4NHJKPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Individual Riser Height — Stair Tread Measurement</video:title>
      <video:description>With the total vertical rise determined (173 inches) and the total number of risers known (24 risers for this staircase), use a calculator to divide the total rise by the number of risers. For example, 173 inches / 24 risers = 7.2083333 inches per riser (approximately 7 and 1/4 inches or 7.25 inches). This calculation provides the precise height for each individual riser to ensure uniformity across the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ubEN4NHJKPI</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10170-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/reF4dSqKIho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Riser Height (Option 1) — Stair Tread Measurement</video:title>
      <video:description>Take the total rise (35 inches) and divide it by a whole number slightly higher than your approximate riser count (e.g., 5, since 4.66666 is closest to 5 when rounding up). In this example, 35 inches divided by 5 risers equals 7 inches per riser. A riser height of 7 inches is considered acceptable, typically falling within the comfortable range of 7 to 8 inches, and ideally between 7.25 and 7.75 inches for optimal comfort. This calculation determines a possible, comfortable, and potentially code-compliant individual riser height.</video:description>
      <video:player_loc>https://www.youtube.com/embed/reF4dSqKIho</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10170-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/reF4dSqKIho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Riser Height (Option 2) and Verify Code Compliance — Stair Tread Measurement</video:title>
      <video:description>To double-check or explore other potential options, divide the total rise (35 inches) by a whole number slightly lower than your approximate riser count (e.g., 4). In this example, 35 inches divided by 4 risers equals 8.75 inches per riser. This height is typically unacceptable for most building departments and building codes, as the maximum allowable rise for a single step is usually 8 inches. Anything above 8 inches would also be uncomfortable for users, thus compromising both safety and comfort. This step emphasizes the importance of adhering to building codes while prioritizing the overall safety and comfort of the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/reF4dSqKIho</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10171-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10171-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — Stair Tread Measurement</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10171-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Stair Tread Measurement</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10172-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10172-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10172-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10173-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U_qBttWNBfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Count Risers and Measure Tread Thickness — Stair Tread Measurement</video:title>
      <video:description>The presenter counts the number of existing risers (steps) from the top landing down to the bottom floor, noting each one. Then, he measures the thickness of one of the granite treads that will be installed on the stairs. He confirms that the staircase has 16 risers and that each granite tread has a thickness of 10.5 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U_qBttWNBfI</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10173-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10173-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2rkFnsTztog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Risers — Stair Tread Measurement</video:title>
      <video:description>Use a stair tread jig to measure the exact dimensions of each riser. Place the jig on the stair, adjust its arms to fit snugly against the side stringers and the top of the current tread, and then lock it in place. Take the jig to your riser material (e.g., plywood), place the jig on it, and mark the cut lines with a pencil. Repeat this process for each riser, as each stair will likely have slightly different dimensions. Cut the marked riser pieces using a miter saw, carefully aligning the blade with your pencil lines. Label the back of each cut riser with its corresponding stair number and its top edge to maintain organization, as each piece is unique.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2rkFnsTztog</video:player_loc>
      <video:duration>131</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10164-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NcQ4hagFWcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount shelf to wall — Pipe Shelf Construction</video:title>
      <video:description>Mount the finished shelf to the wall. Use a level to ensure the shelf is straight and mark the mounting points through the pipe flanges. Drill pilot holes into the wall and secure the shelf using appropriate screws and anchors for the wall type (e.g., brick, drywall with studs).</video:description>
      <video:player_loc>https://www.youtube.com/embed/NcQ4hagFWcs</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10164-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jFBAzFNwiM4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Securing Shelf Unit to Wall Studs — Pipe Shelf Construction</video:title>
      <video:description>To ensure the shelf unit is stable and secure, attach it to the wall. First, use a stud finder to locate the vertical studs behind the drywall. Alternatively, you can use a magnet to find the drywall screws or nails that mark the stud locations, as studs are typically 16 inches apart. Mark the locations of the studs on the wall. Carefully tip the assembled shelf unit onto its front, then use a &apos;lift with your legs&apos; technique to lift it upright and position it against the wall, aligning the shelf&apos;s vertical legs with the marked stud locations. Once aligned, pre-drill holes through the 48-inch horizontal pieces of the shelf frame into the wall studs. Secure these points with 2 1/2 inch screws, making sure each screw firmly hits a stud for maximum stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jFBAzFNwiM4</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10164-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7D2-kdPqOD0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Shelf Frame to Wall — Pipe Shelf Construction</video:title>
      <video:description>First, determine the desired height for the shelf, which is 3 feet in the video. Use a measuring tape and a level to mark a straight, level line on the wall studs where the shelf will be installed. With a helper holding the shelf frame in place along the marked line, use a drill to drive long wood screws through the back of the frame and into the wall studs, securing it firmly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7D2-kdPqOD0</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10165-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NcQ4hagFWcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble pipe frame — Pipe Shelf Construction</video:title>
      <video:description>Begin assembling the pipe structure for the shelf. Start by connecting the pipes and fittings to form the desired shape and size of the shelf supports. This often involves screwing pipes into threaded fittings, ensuring a snug fit. The video shows the assembly of two main pipe sections that will connect to the wooden shelf.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NcQ4hagFWcs</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10165-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7tXYlUMkgY4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble First Pipe Support — Pipe Shelf Construction</video:title>
      <video:description>Start by assembling one end of the black pipe structure. Thread one of the 1-inch nipples into a floor flange. Then, thread one of the 90-degree elbows onto the other end of the nipple. This forms the first support bracket for the main pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7tXYlUMkgY4</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10165-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7tXYlUMkgY4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Other Pipe Support — Pipe Shelf Construction</video:title>
      <video:description>Now, attach the main 6-foot black pipe to the first assembled support by threading it into the 90-degree elbow. Then, repeat the assembly process from Step 3 for the other end: thread the second 1-inch nipple into the remaining flange, and then thread the nipple into the other end of the 6-foot black pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7tXYlUMkgY4</video:player_loc>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10167-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NcQ4hagFWcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and stain wood — Pipe Shelf Construction</video:title>
      <video:description>Sand the wooden shelf to create a smooth surface. Use a power sander to remove any rough spots or imperfections. After sanding, apply a wood stain to enhance the grain and color of the wood. The video shows applying a dark stain, followed by a lighter stain or glaze for a weathered effect.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NcQ4hagFWcs</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10167-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eSm8kNLoQqw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Stain Shelves — Pipe Shelf Construction</video:title>
      <video:description>Using a 220-grit sandpaper and an orbital sander, thoroughly sand all surfaces of the assembled floating shelves. Pay attention to edges and any rough spots to ensure a smooth finish. Once sanded, wipe away any dust. Then, using a cotton rag, apply your chosen wood stain (a dark brown was used in the video) evenly across all wooden surfaces of the shelves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eSm8kNLoQqw</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10167-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J2QT3HShQY8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Finish the Shelving Unit — Pipe Shelf Construction</video:title>
      <video:description>Once the shelving unit is fully assembled and structurally sound, it&apos;s time for sanding. Use an orbital sander to smooth all rough surfaces, edges, and corners of the wooden pallets. Pay extra attention to areas where you made cuts or where the wood might have splinters. Sanding will not only improve the aesthetics of the unit but also make it safer to handle and use. After sanding, you can choose to apply a wood finish like stain, varnish, or paint for added durability and a personalized look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J2QT3HShQY8</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10166-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NcQ4hagFWcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach shelf to pipe frame — Pipe Shelf Construction</video:title>
      <video:description>Attach the finished wooden shelf to the pipe frame. Align the shelf with the pipe supports and secure it using screws. Ensure the shelf is level and firmly attached. The video shows attaching the shelf to the pipe structure, which will then be mounted to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NcQ4hagFWcs</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10166-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-4gDnXEXaW8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Shelves and Secure with Tube Straps — Pipe Shelf Construction</video:title>
      <video:description>With all the pipe brackets now level, the wooden shelves can be placed on top. To ensure maximum stability and prevent the shelves from sliding back and forth, the presenter recommends using galvanized tube straps. These straps wrap around the pipe and are screwed into the underside of the wooden shelf, holding it firmly in place. This step is crucial for long-term durability and safety, especially in a high-traffic area like a laundry room. If tube straps aren&apos;t used, creating a channel or recess in the underside of the shelf could also help prevent sliding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-4gDnXEXaW8</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10166-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/halohmYz60Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place Shelves and Secure with Clips — Pipe Shelf Construction</video:title>
      <video:description>Carefully lift each pre-built and stained wooden shelf box and slide it onto the corresponding pipe supports. The hollow design of the shelves allows them to fit snugly over the pipes, creating the floating effect. Once the shelves are in place, retrieve the small retaining clips that typically come with industrial pipe brackets. Position one clip directly underneath each pipe support where it meets the shelf. Secure these clips to the bottom of the shelf with small screws, using a drill or screwdriver. These clips prevent the shelves from shifting or being accidentally knocked off the supports, adding an extra layer of safety and stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/halohmYz60Q</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10163-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aBIc7LcMdPg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Metal Pipe Fittings — Pipe Shelf Construction</video:title>
      <video:description>Begin by thoroughly cleaning all the metal pipe fittings and components in a sink. Use a toothbrush and a kitchen brush with soapy water to remove any grease, dirt, or manufacturing residues. Ensure all threaded parts are clean for proper sealing later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aBIc7LcMdPg</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10163-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zUxhrHjXItM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Dry Pipes — Pipe Shelf Construction</video:title>
      <video:description>After scrubbing, remove each pipe component from the TSP solution. Rinse them thoroughly under clean, running water to wash away all traces of the TSP and any loosened grime. It&apos;s crucial to ensure no cleaning solution remains on the metal. Once rinsed, dry the pipes completely with a clean towel or allow them to air dry. The pipes are now prepared and ready to receive your chosen finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zUxhrHjXItM</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10163-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zUxhrHjXItM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Soak and Scrub Pipes — Pipe Shelf Construction</video:title>
      <video:description>Carefully place all the galvanized pipe components into the prepared TSP solution in the bucket. Ensure they are fully submerged. Allow the pipes to soak for a couple of minutes to give the TSP time to break down any remaining grease, oil, or manufacturing residues. After soaking, use a scrub pad to vigorously scrub all surfaces of each pipe piece, including the threaded areas and flanges. Be thorough to remove all contaminants.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zUxhrHjXItM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10158-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1oZabfoszjc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Components to Size — Pipe Shelf</video:title>
      <video:description>Using your finalized design and measurements, accurately cut all PVC pipes to their required lengths with a PVC pipe cutter or a hacksaw. Ensure that all cuts are clean and straight to allow for proper fitting and a stable structure. After cutting, use sandpaper to smooth any rough edges on the PVC pipes, as well as on the wooden boards to prevent splinters or snags. Next, cut the wooden boards to the specified dimensions for your shelves using a circular saw or hand saw. If you plan to include a mesh backing, cut it to size as well, preparing all components for assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1oZabfoszjc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10158-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lmPrYi-kFeM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut the Pipe Squarely — Pipe Shelf</video:title>
      <video:description>Use a hand saw, miter saw, or a specialized plastic tubing cutter to cut the pipe to the desired length. Ensure the cut is as straight and square as possible. A crooked cut can result in an improper fit and a weak joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lmPrYi-kFeM</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10158-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M_HPeH9FsMs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut PVC Pipes — Pipe Shelf</video:title>
      <video:description>Begin by using PVC pipe cutters to cut the PVC pipes to the desired lengths. Mark the cutting points with a marker. Ensure clean cuts for proper fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M_HPeH9FsMs</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10161-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NcQ4hagFWcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach shelf to pipe frame — Pipe Shelf</video:title>
      <video:description>Attach the finished wooden shelf to the pipe frame. Align the shelf with the pipe supports and secure it using screws. Ensure the shelf is level and firmly attached. The video shows attaching the shelf to the pipe structure, which will then be mounted to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NcQ4hagFWcs</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10161-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/halohmYz60Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place Shelves and Secure with Clips — Pipe Shelf</video:title>
      <video:description>Carefully lift each pre-built and stained wooden shelf box and slide it onto the corresponding pipe supports. The hollow design of the shelves allows them to fit snugly over the pipes, creating the floating effect. Once the shelves are in place, retrieve the small retaining clips that typically come with industrial pipe brackets. Position one clip directly underneath each pipe support where it meets the shelf. Secure these clips to the bottom of the shelf with small screws, using a drill or screwdriver. These clips prevent the shelves from shifting or being accidentally knocked off the supports, adding an extra layer of safety and stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/halohmYz60Q</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10161-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-4gDnXEXaW8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Shelves and Secure with Tube Straps — Pipe Shelf</video:title>
      <video:description>With all the pipe brackets now level, the wooden shelves can be placed on top. To ensure maximum stability and prevent the shelves from sliding back and forth, the presenter recommends using galvanized tube straps. These straps wrap around the pipe and are screwed into the underside of the wooden shelf, holding it firmly in place. This step is crucial for long-term durability and safety, especially in a high-traffic area like a laundry room. If tube straps aren&apos;t used, creating a channel or recess in the underside of the shelf could also help prevent sliding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-4gDnXEXaW8</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10162-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NcQ4hagFWcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount shelf to wall — Pipe Shelf</video:title>
      <video:description>Mount the finished shelf to the wall. Use a level to ensure the shelf is straight and mark the mounting points through the pipe flanges. Drill pilot holes into the wall and secure the shelf using appropriate screws and anchors for the wall type (e.g., brick, drywall with studs).</video:description>
      <video:player_loc>https://www.youtube.com/embed/NcQ4hagFWcs</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10162-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u9sZSZhNH-0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Pipe Structure to the Wall — Pipe Shelf</video:title>
      <video:description>After assembling the pipe structure, it is mounted to the wall. The presenter first pre-drills pilot holes into the wall where the pipe flanges will attach. He then positions the entire pipe assembly, ensuring it is level, and uses a DeWalt cordless drill with a screwdriver bit to drive screws through the holes in the black iron pipe flanges, directly into the wall. He secures both the upper and lower flanges, transforming the loose pipe assembly into a fixed, functional wall-mounted holder for paper rolls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u9sZSZhNH-0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10162-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jFBAzFNwiM4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Securing Shelf Unit to Wall Studs — Pipe Shelf</video:title>
      <video:description>To ensure the shelf unit is stable and secure, attach it to the wall. First, use a stud finder to locate the vertical studs behind the drywall. Alternatively, you can use a magnet to find the drywall screws or nails that mark the stud locations, as studs are typically 16 inches apart. Mark the locations of the studs on the wall. Carefully tip the assembled shelf unit onto its front, then use a &apos;lift with your legs&apos; technique to lift it upright and position it against the wall, aligning the shelf&apos;s vertical legs with the marked stud locations. Once aligned, pre-drill holes through the 48-inch horizontal pieces of the shelf frame into the wall studs. Secure these points with 2 1/2 inch screws, making sure each screw firmly hits a stud for maximum stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jFBAzFNwiM4</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10159-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NcQ4hagFWcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble pipe frame — Pipe Shelf</video:title>
      <video:description>Begin assembling the pipe structure for the shelf. Start by connecting the pipes and fittings to form the desired shape and size of the shelf supports. This often involves screwing pipes into threaded fittings, ensuring a snug fit. The video shows the assembly of two main pipe sections that will connect to the wooden shelf.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NcQ4hagFWcs</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10159-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7tXYlUMkgY4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble First Pipe Support — Pipe Shelf</video:title>
      <video:description>Start by assembling one end of the black pipe structure. Thread one of the 1-inch nipples into a floor flange. Then, thread one of the 90-degree elbows onto the other end of the nipple. This forms the first support bracket for the main pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7tXYlUMkgY4</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10159-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7tXYlUMkgY4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Other Pipe Support — Pipe Shelf</video:title>
      <video:description>Now, attach the main 6-foot black pipe to the first assembled support by threading it into the 90-degree elbow. Then, repeat the assembly process from Step 3 for the other end: thread the second 1-inch nipple into the remaining flange, and then thread the nipple into the other end of the 6-foot black pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7tXYlUMkgY4</video:player_loc>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10160-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NMMpnTeaosU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather and Prepare Wood — Pipe Shelf</video:title>
      <video:description>Begin by gathering an assortment of wooden planks, ideally reclaimed wood such as pallet wood, which often has character and is a cost-effective choice. Carefully inspect each plank for any loose nails or splinters and remove them. To achieve a smooth surface, clamp the planks securely together in pairs or individually and sand them thoroughly using various grits of sandpaper, starting with a coarser grit (e.g., P100) to remove rough spots and progressing to a finer grit (e.g., P120) for a smoother finish. This preparation is crucial for a professional look and feel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NMMpnTeaosU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10160-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/G3TgqozKu6A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Materials and Sand Boards — Pipe Shelf</video:title>
      <video:description>Begin by gathering the necessary wood planks. The initial plan was to use three 8-foot planks left over from a fence and a piece of cedar leftover from a table project. However, the cedar piece was later swapped for another 8-foot cedar plank due to color preference. Once the planks are gathered, sand them thoroughly, focusing on the outside surfaces to achieve a smooth finish. The inside surfaces do not require sanding as they will not be visible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/G3TgqozKu6A</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10160-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GEfP1TlwUyw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand Wood Pieces — Pipe Shelf</video:title>
      <video:description>Once the wood pieces are cut, place them on saw horses. Use a palm sander to smooth all four sides of each wood piece. While it doesn&apos;t need to be perfectly smooth, aim to remove any rough edges and splinters for a comfortable and aesthetically pleasing finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GEfP1TlwUyw</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10152-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Carpet Stair Treads</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10152-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Smooth Stairs — Carpet Stair Treads</video:title>
      <video:description>Before starting the installation, ensure that the existing stairs are thoroughly cleaned and smoothed. Use a broom to remove any dust, debris, or loose particles from the risers and treads. A clean and smooth surface is essential for proper adhesion and a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10152-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3oCZGCgDRZE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Carpet Stair Treads</video:title>
      <video:description>Prepare a cleaning solution by pouring concentrated sugar soap into a basin or bucket of water. Wearing rubber gloves, immerse a cleaning cloth or sponge into the solution and thoroughly wipe down all sanded stair surfaces. This step removes any remaining dust, dirt, or grease, ensuring optimal adhesion for the paint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3oCZGCgDRZE</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10153-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GVgCcuwyOEE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Curing and Caulking — Carpet Stair Treads</video:title>
      <video:description>Once the entire staircase installation is complete, it&apos;s important to allow the adhesive to fully set. Try to limit the use of the stairs for several hours (the video animation suggests around 4-8 hours) to ensure the vinyl bonds securely to the stairs. Depending on the accuracy of your cuts and the desired final aesthetic, you may choose to apply caulking, such as DAP Alex Plus acrylic latex caulk plus silicone, along the sides where the vinyl meets the stringers or walls. This will cover any minor imperfections or gaps, providing a clean and finished look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GVgCcuwyOEE</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10153-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Project Completion — Carpet Stair Treads</video:title>
      <video:description>Once all installation steps are complete, including securing risers, treads, and optional return trim, and after allowing the adhesive to fully dry (typically 24 to 48 hours), your beautiful new stairs are ready to use. Enjoy your newly updated staircase for years to come!</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10153-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Installation and Caulk Gaps — Carpet Stair Treads</video:title>
      <video:description>Continue installing the remaining risers and treads by repeating the process outlined in the previous two steps, working your way up the staircase. Ensure each riser is adhered with polyurethane adhesive and secured with finish nails. Similarly, each tread should be dry-fitted, coated with adhesive (perimeter and zigzag), placed with expansion gaps, and nailed at the back edge. Once all risers and treads are installed, clean the stairs thoroughly. Then, use caulk or clear silicone with a caulking gun to fill in all the 1/16 inch expansion gaps for a seamless and finished look. After completion, it&apos;s crucial to stay off the stairs for 24 to 48 hours to allow sufficient time for the construction adhesive to fully dry and cure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10154-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZrWNkbh5j4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Treads to Stairs — Carpet Stair Treads</video:title>
      <video:description>To install the prepared carpet tread, first ensure your alignment is correct. You can use a laser level to project a straight line from the wall across the stair, or simply use a tape measure to ensure consistent spacing from the wall for each tread. Once aligned, carefully place the tread onto the stair, ensuring the adhesive side makes contact with the hardwood. Apply firm pressure across the entire surface of the tread, using your feet or a specialized roller tool, to ensure the double-sided tape adheres completely and securely to the stair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZrWNkbh5j4M</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10154-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10154-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Carpet Stair Treads</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10156-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — Carpet Stair Treads</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10156-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Carpet Stair Treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10156-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10157-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Carpet Stair Treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10157-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — Carpet Stair Treads</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10157-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Carpet Stair Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10155-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — Carpet Stair Treads</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10155-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kYgqr16we1A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Carpet to Size — Carpet Stair Treads</video:title>
      <video:description>Unroll the carpet onto a flat surface to prepare for cutting. Measure the width of your staircase accurately. The video suggests cutting the carpet &apos;half an inch wider than my staircase&apos; to allow for tucking and a snug fit. Use a marker and a long, straight edge (like a large ruler or T-square) to draw a straight line along the carpet&apos;s backing. Carefully cut along this line using a sharp utility knife, ensuring a clean and precise cut. For long cuts, it might be helpful to use weights, such as dumbbells, to hold the carpet and straight edge in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kYgqr16we1A</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10155-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hBQ9-Oz5oFc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Pieces — Carpet Stair Treads</video:title>
      <video:description>Based on the stair measurements, lay out the carpet and carefully cut it into individual pieces for each tread and riser. It&apos;s often recommended to cut the carpet slightly larger than the exact dimensions to allow for adjustments and trimming. Use a metal straight edge to guide a sharp utility knife for precise, straight cuts through the carpet backing. Ensure the carpet pile direction is consistent for all stair pieces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hBQ9-Oz5oFc</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10138-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JfjZVklO-5Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Removing Old Caulk — Bathtub Caulking</video:title>
      <video:description>Before applying new caulk, all existing caulk must be thoroughly removed. Begin by manually pulling off any large, already detached sections of old caulk. For caulk still adhered to the surface, you can score it with a utility knife to break its seal. A sharp painter&apos;s tool can then be used to scrape and break up the connection between the caulk and the surface. For areas that are difficult to clean, a specialized caulk remover tool can be effective, especially on hard surfaces like ceramic or porcelain tile. If removing caulk from softer surfaces like acrylic tubs, be extremely careful not to scratch or damage them; a plastic caulk remover tool might be safer. For stubborn residue, you can use isopropyl alcohol (91% or higher) applied with a spray bottle and wiped with a sponge, allowing it to sit for a few seconds first. Vinegar is another common household substance that can help loosen caulk. Some specialized chemical caulk removers like &apos;Goo Gone Caulk Remover&apos; are also available, but carefully read their labels as some can damage acrylic surfaces. WD-40 is not recommended as it leaves a lubricant residue that prevents new caulk from adhering properly. A heat gun can also be used to soften caulk, making it easier to scrape, but use caution to avoid heat damage to surrounding materials.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JfjZVklO-5Y</video:player_loc>
      <video:duration>206</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10138-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_WGLMgLwRcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrape and Remove the Caulk — Bathtub Caulking</video:title>
      <video:description>Using a plastic putty knife, begin scraping and pulling out the old caulk that was just cut. The plastic putty knife is effective and won&apos;t scratch the surfaces. Work your way along the entire joint, digging out as much of the old caulk as possible. You may need to alternate between the putty knife and the utility knife to remove all the pieces. Place a rag over the drain to catch the debris. The goal is to create a clean, open gap for the new caulk to adhere to.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_WGLMgLwRcM</video:player_loc>
      <video:duration>97</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10138-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_WGLMgLwRcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrape and Remove the Caulk — Bathtub Caulking</video:title>
      <video:description>Using a plastic putty knife, begin scraping and pulling out the old caulk that was just cut. The plastic putty knife is effective and won&apos;t scratch the surfaces. Work your way along the entire joint, digging out as much of the old caulk as possible. You may need to alternate between the putty knife and the utility knife to remove all the pieces. Place a rag over the drain to catch the debris. The goal is to create a clean, open gap for the new caulk to adhere to.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_WGLMgLwRcM</video:player_loc>
      <video:duration>97</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10141-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0Nc9BOpCFl4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cure Caulk and Final Review — Bathtub Caulking</video:title>
      <video:description>After successfully applying and smoothing the caulk, it is crucial to allow it to cure completely. The presenter recommends a minimum of 12 hours before using the shower or bathtub. This curing time ensures that the silicone forms a strong, durable, and waterproof seal. Once cured, your shower will look much cleaner and be protected from water damage and mold.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0Nc9BOpCFl4</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10141-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wOAhQSN9-VA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Sealant to Cure — Bathtub Caulking</video:title>
      <video:description>Once the silicone sealant has been applied and smoothed, it is essential to allow it to cure fully before exposing it to water. The manufacturer recommends leaving the silicone to dry for approximately 24 hours before using the shower. This curing period ensures the sealant achieves its maximum strength, adhesion, and waterproofing properties.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wOAhQSN9-VA</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10141-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bpmKZypfo_Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cure caulk — Bathtub Caulking</video:title>
      <video:description>Allow the applied caulk to cure for a full 24 hours before using the shower. This ensures the caulk has properly hardened and will form a durable, watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bpmKZypfo_Q</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10142-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pg9-SNpBMkw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mask the Caulking Area with Tape — Bathtub Caulking</video:title>
      <video:description>This step is optional but highly recommended for a professional-looking result. Apply painter&apos;s tape along the top and bottom edges of where the caulk bead will be, leaving a gap of approximately 2-4 millimeters (about 0.08-0.16 inches) for the caulk. This creates a guide, ensuring a perfectly straight line for your caulk application. Carefully press down the tape to ensure it adheres firmly to the surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pg9-SNpBMkw</video:player_loc>
      <video:duration>118</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10142-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xXXMbbcHoGw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Area with Painter&apos;s Tape — Bathtub Caulking</video:title>
      <video:description>Begin by applying painter&apos;s tape to define the caulk lines. Place one strip of painter&apos;s tape along the tub or floor edge and another strip along the wall, leaving a consistent, small gap between them where the caulk will be applied. This creates a clean, straight line for your caulk bead. For easier removal, slightly fold over a small end piece of the tape on one side, making it easier to grab later. The video demonstrates applying tape to both surfaces (floor and wall) bordering the joint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xXXMbbcHoGw</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10142-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B-ZYP7C5HWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Painter&apos;s Tape — Bathtub Caulking</video:title>
      <video:description>To achieve a perfectly straight and clean caulk line, apply painter&apos;s masking tape along both sides of the joint where the caulk will be applied. Position the tape precisely to define the width and edges of your desired caulk bead. This will act as a guide and prevent excess caulk from adhering to surrounding surfaces, making cleanup much easier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B-ZYP7C5HWI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10143-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AcgErpZ_D0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Caulk — Bathtub Caulking</video:title>
      <video:description>Position the caulk gun at the start of the joint. Keep the gun relatively level and apply steady, consistent pressure to the trigger. As the caulk begins to flow, move the gun smoothly along the joint, filling the gap between the tape lines. Maintain a constant speed to ensure an even bead of caulk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AcgErpZ_D0c</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10143-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AcgErpZ_D0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Caulk — Bathtub Caulking</video:title>
      <video:description>Position the caulk gun at the start of the joint. Keep the gun relatively level and apply steady, consistent pressure to the trigger. As the caulk begins to flow, move the gun smoothly along the joint, filling the gap between the tape lines. Maintain a constant speed to ensure an even bead of caulk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AcgErpZ_D0c</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10143-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7sLSy7A1GYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Caulk — Bathtub Caulking</video:title>
      <video:description>Position the tip of the caulk gun in the corner of the joint. Apply steady, consistent pressure to the trigger while moving the gun smoothly along the seam. The goal is to lay down a continuous and uniform bead of caulk that adequately fills the gap. Avoid applying too much caulk, as this will result in a messy and difficult smoothing process. If you notice a spot is too thin, it is easier to add a little more caulk later than to clean up an excessive amount.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7sLSy7A1GYs</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10145-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tMyQ4fS9s_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Caulk Tube — Bathtub Caulking</video:title>
      <video:description>Using a utility knife, carefully slice off the very tip of the threaded end of the silicone caulk tube. Next, take the plastic applicator nozzle and cut its tip off at a slight angle. The size of the opening should match the size of the gap you intend to fill. Creating a small opening provides better control over the bead of caulk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tMyQ4fS9s_g</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10145-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tMyQ4fS9s_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Caulk Tube — Bathtub Caulking</video:title>
      <video:description>Using a utility knife, carefully slice off the very tip of the threaded end of the silicone caulk tube. Next, take the plastic applicator nozzle and cut its tip off at a slight angle. The size of the opening should match the size of the gap you intend to fill. Creating a small opening provides better control over the bead of caulk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tMyQ4fS9s_g</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10145-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hNphNEVd0Ko/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Caulk Tube Nozzle — Bathtub Caulking</video:title>
      <video:description>Prepare the caulk tube by cutting its opening. Use a utility knife to cut the nozzle at a 45-degree angle. Make sure the opening is small to allow for a thin, controlled bead of caulk. After cutting the angle, &apos;square off&apos; the top of the nozzle with the knife to create a flat, &apos;shoe-like&apos; shape. This specialized cut helps guide the caulk and makes smoothing easier during application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hNphNEVd0Ko</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10144-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pg9-SNpBMkw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Dry the Surface Thoroughly — Bathtub Caulking</video:title>
      <video:description>Once all old caulk is removed, the area must be completely clean and dry. Use a barely damp sponge and rub it along the perimeter of the bathtub/shower, going back and forth a few times to remove any residual particles. Next, take a clean towel and thoroughly dry the entire area, ensuring no water is left. This ensures optimal adhesion for the new caulk. As a final step, use a vacuum cleaner with a nozzle attachment to suck up any lingering dust or small particles along the seam, leaving the surface perfectly smooth and clean. You should feel no bumps when running your finger along the tile or bathtub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pg9-SNpBMkw</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10144-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B-ZYP7C5HWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Caulk and Clean Surface — Bathtub Caulking</video:title>
      <video:description>Begin by assessing the area where the tub meets the wall for any old, cracked, or stained caulk. Using a utility knife or a scraper, carefully cut and scrape away all existing caulk or sealant from the joint. Be cautious to avoid scratching the tub or wall surfaces. Once the old caulk is mostly removed, pull out any loose pieces. Then, thoroughly clean the entire area with water and a disinfectant to eliminate dirt, grime, mold, or mildew. Rinse well and wipe off excess water. For a final cleaning step, wipe the seam with rubbing alcohol to remove any remaining residue or film, ensuring the surface is perfectly clean and dry for optimal caulk adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B-ZYP7C5HWI</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10144-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OTnsdUmKzIY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare the Surface — Bathtub Caulking</video:title>
      <video:description>After removing the old caulk, clean the area thoroughly. Use water and a disinfectant to scrub away any dirt, grime, mold, or mildew. Rinse the area well to remove cleaning solution residue and wipe off any excess water. As a final cleaning step, wipe the seam or joint with rubbing alcohol to eliminate any remaining residue or film. It is crucial for the area to be completely clean and dry to ensure proper adhesion of the new caulk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OTnsdUmKzIY</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10139-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Vs5kpPqoIts/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Smoothing the Caulk Bead — Bathtub Caulking</video:title>
      <video:description>Immediately after applying the caulk, smooth the bead. You can use a damp paper towel wrapped around your fingertip, or simply your wet finger. Gently run your finger along the fresh caulk bead, applying light pressure. This process, known as &apos;tooling&apos;, pushes the caulk into the joint to create a proper seal and removes excess caulk, leaving a smooth, concave, professional-looking finish. Wipe the excess caulk from your finger onto a separate paper towel as you go.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Vs5kpPqoIts</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10139-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AcgErpZ_D0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Smooth the Caulk Bead — Bathtub Caulking</video:title>
      <video:description>Immediately after applying the caulk, smooth the bead. Lightly wet your finger and run it along the caulk line with gentle, consistent pressure. This process, called &apos;tooling,&apos; pushes the caulk firmly into the joint for a good seal and creates a smooth, concave finish. Wipe any excess caulk from your finger onto a clean rag as you go.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AcgErpZ_D0c</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10139-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AcgErpZ_D0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Smooth the Caulk Bead — Bathtub Caulking</video:title>
      <video:description>Immediately after applying the caulk, smooth the bead. Lightly wet your finger and run it along the caulk line with gentle, consistent pressure. This process, called &apos;tooling,&apos; pushes the caulk firmly into the joint for a good seal and creates a smooth, concave finish. Wipe any excess caulk from your finger onto a clean rag as you go.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AcgErpZ_D0c</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10140-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8tdp0lLfCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Painter&apos;s Tape — Bathtub Caulking</video:title>
      <video:description>While the caulk is still wet, carefully remove the painter&apos;s tape. Start at one end and pull the tape slowly and steadily, at a 45-degree angle away from the fresh caulk line. This will create a sharp, clean edge. If you wait for the caulk to dry, removing the tape can pull the caulk out of the joint, ruining your work. Remove both strips of tape to reveal your perfectly finished, professional-looking caulk bead.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8tdp0lLfCw</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10140-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8tdp0lLfCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Painter&apos;s Tape — Bathtub Caulking</video:title>
      <video:description>While the caulk is still wet, carefully remove the painter&apos;s tape. Start at one end and pull the tape slowly and steadily, at a 45-degree angle away from the fresh caulk line. This will create a sharp, clean edge. If you wait for the caulk to dry, removing the tape can pull the caulk out of the joint, ruining your work. Remove both strips of tape to reveal your perfectly finished, professional-looking caulk bead.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8tdp0lLfCw</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10140-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B-ZYP7C5HWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Painter&apos;s Tape — Bathtub Caulking</video:title>
      <video:description>If you used painter&apos;s masking tape in step 2, remove it immediately after smoothing the caulk and before the caulk begins to dry or skin over. To remove, lift one edge of the tape and pull it away from the sealed joint at a 45-degree angle. Pull slowly and steadily to avoid disturbing the newly applied caulk bead and ensure a crisp, clean line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B-ZYP7C5HWI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10107-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E6umQQYvOqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Joint Compound — Drywall Patch</video:title>
      <video:description>Joint compound is applied over the patch and surrounding area to fill gaps and blend the repair with the existing wall. A putty knife is used to spread the compound smoothly. Multiple coats may be needed. </video:description>
      <video:player_loc>https://www.youtube.com/embed/E6umQQYvOqQ</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10107-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9DKCzroGdV8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>First Coat Application — Drywall Patch</video:title>
      <video:description>Apply a thin layer of joint compound over the patch using a 6 inch taping knife, smoothing it out to create a smooth, even surface. Overlap the surrounding area slightly to blend it with the existing wall. </video:description>
      <video:player_loc>https://www.youtube.com/embed/9DKCzroGdV8</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10107-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZMfLAEw4ZUw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drywall Compound Application — Drywall Patch</video:title>
      <video:description>Using a putty knife, apply a generous layer of drywall compound over the patch, ensuring that it completely covers the mesh. Spread the compound evenly, feathering the edges to blend with the surrounding wall surface. </video:description>
      <video:player_loc>https://www.youtube.com/embed/ZMfLAEw4ZUw</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10112-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DXqkab97mTg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Final Primer Coat — Drywall Patch</video:title>
      <video:description>Apply a final coat of primer/sealer over the entire repaired area, extending slightly beyond the edges of the joint compound. This ensures uniform porosity and color, providing an ideal base for the final paint coat. Allow the primer to dry completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DXqkab97mTg</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10112-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RcbEMGciilI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply a Coat of Primer — Drywall Patch</video:title>
      <video:description>Apply a coat of primer over the entire repaired area. This step is vital to ensure that the paint adheres well to the newly patched surface and that the final painted finish appears even and consistent with the rest of the wall. Allow the primer to dry completely according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RcbEMGciilI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10112-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7iHTs5U7CXI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime the Repaired Area — Drywall Patch</video:title>
      <video:description>After ensuring the patched area is completely smooth and free of dust, apply a coat of primer, sealer, and undercoat. The video suggests using &quot;Dulux 1 Step Prep Primer, Sealer &amp; Undercoat.&quot; Apply the primer evenly over the entire patched area and extend it slightly onto the surrounding wall. This step is essential to seal the porous plasterboard and ensure that the topcoat of paint adheres properly and has a uniform finish, preventing flash marks or differences in sheen. Allow the primer to dry completely according to the product&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7iHTs5U7CXI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10113-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YU1z2y11KZY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Paint to the Repaired Area — Drywall Patch</video:title>
      <video:description>After the primer has dried completely, apply the final paint coats. Pour the wall paint (matching the existing wall color) into a clean paint tray. First, use a paintbrush to carefully &apos;cut in&apos; along the edges where the wall meets the cabinets or trim. Then, use a small roller to apply the paint to the main patched area, again starting in the middle and feathering out to blend seamlessly with the surrounding wall. Apply a second coat of paint if necessary, following the same cutting-in and rolling technique, to ensure complete coverage and a uniform finish. The goal is to make the repaired crack completely disappear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YU1z2y11KZY</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10113-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nBeDa3OWzN8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint Repaired Area — Drywall Patch</video:title>
      <video:description>After the primer has dried completely, take a small paint roller and apply paint to the primed areas. Make sure to use paint that matches the existing wall color. Apply the paint in a way that blends the repaired spots with the rest of the wall, ensuring seamless coverage. You may need to apply a second coat if necessary, allowing adequate drying time between coats.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nBeDa3OWzN8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10113-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7iHTs5U7CXI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Topcoat Paint — Drywall Patch</video:title>
      <video:description>Once the primer is completely dry, apply the final topcoat of paint. Use paint that matches the color and finish of the existing wall. Apply the paint evenly over the primed patch, extending slightly beyond its edges to blend seamlessly with the surrounding wall. Depending on the paint and desired coverage, you may need to apply two coats, allowing adequate drying time between each.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7iHTs5U7CXI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10108-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N_YTNoLKnqs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drying — Drywall Patch</video:title>
      <video:description>Let the joint compound dry completely (overnight or use a hair dryer).</video:description>
      <video:player_loc>https://www.youtube.com/embed/N_YTNoLKnqs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10108-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N_YTNoLKnqs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drying — Drywall Patch</video:title>
      <video:description>Let the joint compound dry completely (overnight or use a hair dryer).</video:description>
      <video:player_loc>https://www.youtube.com/embed/N_YTNoLKnqs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10108-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N_YTNoLKnqs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drying — Drywall Patch</video:title>
      <video:description>Let the joint compound dry completely (overnight or use a hair dryer).</video:description>
      <video:player_loc>https://www.youtube.com/embed/N_YTNoLKnqs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10106-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c85wcsn4nf4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Drywall Patch — Drywall Patch</video:title>
      <video:description>Unpack the drywall repair patch, revealing the metal mesh on one side and a sticky backing on the other. Carefully peel off the protective paper from the sticky side of the patch. Position the patch directly over the hole in the drywall, ensuring it completely covers the damaged area. Apply gentle pressure from the center of the patch outwards towards the edges to adhere it securely to the wall and prevent any wrinkles from forming.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c85wcsn4nf4</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10106-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qvRzqNuJk9E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply the Wall Patch — Drywall Patch</video:title>
      <video:description>Now, proceed with applying the self-adhesive patch. If necessary, use a pair of scissors to cut the self-adhesive wall patch to an appropriate size. The patch should be large enough to completely cover the hole with an overlap. Position the patch directly over the hole on the wall, ensuring there&apos;s an overlap of at least 3 centimeters (approximately 1.2 inches) between the edge of the hole and the edge of the patch. Remove the protective backing from the patch and firmly press it down onto the wall, paying special attention to the edges to ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qvRzqNuJk9E</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10106-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PzII-9lHoQw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Mesh Patch — Drywall Patch</video:title>
      <video:description>Select a self-adhesive drywall mesh patch that is slightly larger than the hole. Peel back the adhesive backing and carefully apply the patch to the hole, ensuring it adheres firmly to the drywall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PzII-9lHoQw</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10111-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d8R4t_e-Bqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Second Compound Coat — Drywall Patch</video:title>
      <video:description>Once the first coat is dry, apply a second coat of joint compound and feather the edges to create a smooth transition with the surrounding wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d8R4t_e-Bqg</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10111-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d8R4t_e-Bqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Second Compound Coat — Drywall Patch</video:title>
      <video:description>Once the first coat is dry, apply a second coat of joint compound and feather the edges to create a smooth transition with the surrounding wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d8R4t_e-Bqg</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10111-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DXqkab97mTg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Clean Second Coat of Joint Compound — Drywall Patch</video:title>
      <video:description>After the second coat of joint compound has thoroughly dried, sand the area again with sandpaper (e.g., 120-grit or a finer grit for a smoother finish) until it is perfectly smooth and level with the surrounding wall. Once sanded, wipe away all dust using a damp rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DXqkab97mTg</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10110-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XFq19HhCnPo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Second Coat — Drywall Patch</video:title>
      <video:description>Apply a second layer of joint compound over the patched areas and smooth using a putty knife. This second layer helps to ensure a smooth and even finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XFq19HhCnPo</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10110-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GRzbOO5Sc_Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Skim Coat — Drywall Patch</video:title>
      <video:description>Apply a second, thinner coat of joint compound over the entire repair area. Use a wider taping knife (e.g., 10 or 12-inch) for this step. Apply the mud and then, with long, smooth strokes, skim off the excess, feathering the edges well beyond the original patch. This creates a seamless transition between the patch and the existing wall surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GRzbOO5Sc_Y</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10110-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dWq18CGF6OE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Second Coat and Smoothing — Drywall Patch</video:title>
      <video:description>Using the putty knife, apply a second coat of joint compound over the patch, feathering the edges out to blend with the surrounding wall. Use the hawk to support your work. Smooth the joint compound until the patch is completely covered and the surface is relatively smooth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dWq18CGF6OE</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10109-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r9azmWhZ5PU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Finish — Drywall Patch</video:title>
      <video:description>Once the final coat of joint compound is completely dry, gently sand the patched area using 120-grit sandpaper. The goal is to create a perfectly smooth surface that is flush with the surrounding wall. After sanding, wipe away any dust with a damp cloth. The wall is now ready for priming and painting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r9azmWhZ5PU</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10109-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DXqkab97mTg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Clean Second Coat of Joint Compound — Drywall Patch</video:title>
      <video:description>After the second coat of joint compound has thoroughly dried, sand the area again with sandpaper (e.g., 120-grit or a finer grit for a smoother finish) until it is perfectly smooth and level with the surrounding wall. Once sanded, wipe away all dust using a damp rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DXqkab97mTg</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10109-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tROm2mI3cKo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand the Drywall Repair — Drywall Patch</video:title>
      <video:description>Once all coats of joint compound are thoroughly dry, sand the repair area. For the main flat surfaces, use a power sander (like a dust-free drywall sander) to efficiently remove lap marks and achieve a general smoothness. For the edges and corners, use a sanding sponge. The key is to tilt the sponge and apply most of the pressure on the outer edge, feathering it out to prevent creating a sharp ridge or gouge in the finish. The goal is to achieve a gentle, rounded hump with perfectly feathered edges that seamlessly blend into the surrounding wall. After sanding, clean up any dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tROm2mI3cKo</video:player_loc>
      <video:duration>3102</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10105-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-ozbe2W_xvo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Damaged Surface — Drywall Patch</video:title>
      <video:description>First, use a 6-in-1 painter&apos;s tool to carefully scrape away all loose and torn drywall paper from the damaged area. It is crucial to remove any unstable paper, as neglecting this step will cause the repair to fail and the paper to come off eventually, ruining the work. The goal is to create a clean, stable edge around the damaged section, preparing the surface for subsequent repairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-ozbe2W_xvo</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10105-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/czkWV6BvoS0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Surface Preparation — Drywall Patch</video:title>
      <video:description>Use a putty knife or sandpaper to remove any loose pieces of paint or drywall around the damaged area. This ensures that the spackle adheres properly and creates a smooth finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/czkWV6BvoS0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10105-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/czkWV6BvoS0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Surface Preparation — Drywall Patch</video:title>
      <video:description>Use a putty knife or sandpaper to remove any loose pieces of paint or drywall around the damaged area. This ensures that the spackle adheres properly and creates a smooth finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/czkWV6BvoS0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10100-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-dGmgGFVDwA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Hinge from Door and Select New Hinge — Cabinet Door Hinge Replacement</video:title>
      <video:description>Place the detached cabinet door on a stable, flat surface like a table. Carefully remove the screws attaching the old hinge to the cabinet door itself using the cordless drill. The presenter stresses the importance of matching the new hinge to the old one, noting that there are many different types of hinges available. In this case, the hinge is an overlay style. Fortunately, he had spare hinges from a previous project that matched perfectly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-dGmgGFVDwA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10100-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RJDgIPKiEig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Hinge from Door — Cabinet Door Hinge Replacement</video:title>
      <video:description>If you need to completely separate the hinge from the cabinet door (e.g., for painting the door or replacing the hinge itself), observe how the hinge is attached to the door. For &apos;Blum Inserta&apos; type hinges, which are often tool-free, simply open the little &apos;flappy door part&apos; or cover on the hinge cup that&apos;s embedded in the door. This will release the hinge from the door. For other types, there will typically be two screws holding the hinge cup to the door. Use a screwdriver to remove these screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RJDgIPKiEig</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10100-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lJYFNvL8HZk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Hinge — Cabinet Door Hinge Replacement</video:title>
      <video:description>Using a drill equipped with a Phillips head drill bit, proceed to remove all the screws from one of the old door hinges. Work carefully to avoid stripping the screw heads. Once all screws are removed, the hinge might still be stuck due to paint or being tightly set. If so, gently tap the hinge from the backside with a hammer to loosen it, then remove the hinge completely from its mortise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lJYFNvL8HZk</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10099-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DSS4zgma6gw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Cabinet Door — Cabinet Door Hinge Replacement</video:title>
      <video:description>Once both screws on each hinge arm are sufficiently loosened, carefully slide the cabinet door upwards and outwards from the cabinet frame. The loosened screws allow the hinge arms to detach from their mounting plates, enabling the smooth removal of the door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DSS4zgma6gw</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10099-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/byqD9OR1Plk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Cabinet Door — Cabinet Door Hinge Replacement</video:title>
      <video:description>To remove a cabinet door, first open the door completely to access the hinge mechanism. Locate the push clip, which is typically found at the back of the door hinge. Firmly push this clip inward, away from the cabinet frame. Once the clip is disengaged, gently pull the entire hinge mechanism outward from its mounting plate on the cabinet. Be ready to support the door as soon as the hinge is released to prevent it from falling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/byqD9OR1Plk</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10099-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lKiZ3pa4vAg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Cabinet Door — Cabinet Door Hinge Replacement</video:title>
      <video:description>Repeat the previous step for all remaining hinges on the cabinet door. Once every hinge is released from its mounting plate, you can carefully lift and remove the entire cabinet door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lKiZ3pa4vAg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10101-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KJc8Q2mT95Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unpack New Hinges — Cabinet Door Hinge Replacement</video:title>
      <video:description>Once the old hinges are removed, it&apos;s time to prepare the new ones for installation. Open the packaging of the new hinges, which in the video are &quot;GATE HOUSE&quot; brand 3 1/2-inch door hinges. Carefully remove the hinges and the accompanying screws. Take a moment to inspect the new hinges for any manufacturing defects or damage and ensure all screws are present. This step ensures that you have the correct and complete set of hardware before proceeding with the installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KJc8Q2mT95Q</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10101-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lJYFNvL8HZk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Orient New Hinge for Installation — Cabinet Door Hinge Replacement</video:title>
      <video:description>Before installing the new hinge, examine its construction. Hinges typically have a pin that connects the two leaves, with one end often capped (the &apos;top&apos;) and the other end flush or showing a hole. Ensure you install the hinge with the top of the pin pointing upward. Crucially, test the hinge&apos;s closure direction: it should only fold completely in one direction. Orient the hinge so that this &apos;closed&apos; direction allows the door to shut fully. Installing it incorrectly will cause the door to stop short and not close properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lJYFNvL8HZk</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10101-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-dGmgGFVDwA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Hinge from Door and Select New Hinge — Cabinet Door Hinge Replacement</video:title>
      <video:description>Place the detached cabinet door on a stable, flat surface like a table. Carefully remove the screws attaching the old hinge to the cabinet door itself using the cordless drill. The presenter stresses the importance of matching the new hinge to the old one, noting that there are many different types of hinges available. In this case, the hinge is an overlay style. Fortunately, he had spare hinges from a previous project that matched perfectly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-dGmgGFVDwA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10102-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/glmF-9MqqCU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Hinge on Cabinet Door — Cabinet Door Hinge Replacement</video:title>
      <video:description>Take one of your new soft-close hinges. Position it on the cabinet door where the old hinge was, ensuring it sits correctly within the pre-drilled cup hole. Secure the hinge to the door using one of the appropriate screws (often a Phillips head) but do not tighten it completely. Then, insert and partially tighten the second screw into the other designated hole on the hinge. Once both screws are in place, you can fully tighten them. Remember to continue supporting the cabinet door if it only has two hinges to prevent any accidental movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/glmF-9MqqCU</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10102-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xJRTWQokaSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach New Hinges to Door — Cabinet Door Hinge Replacement</video:title>
      <video:description>Using a Phillips head screwdriver, carefully hand-tighten the smaller screws (intended for the door) into the pilot holes to attach the new hinges to the cabinet door. It is highly recommended to avoid using a cordless drill for this step, as it can easily strip the pilot holes or damage the wood, leading to a longer and more complex repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xJRTWQokaSI</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10102-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5x4YPIY1Nd0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Hinges to New Doors — Cabinet Door Hinge Replacement</video:title>
      <video:description>Now, proceed to fix the new standard concealed type hinges to your new cabinet doors. Each hinge is designed with a specific round part that should be pushed into the corresponding circular recess pre-drilled in the door. These parts are typically designed to fit in only one orientation. Once the hinge is correctly seated in its recess, secure it firmly to the door using the screws that are provided with the hinges. If you find it difficult to start the screws or want to prevent splitting the wood, you can use a bradawl to create a small pilot hole before driving in each screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5x4YPIY1Nd0</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10103-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-dGmgGFVDwA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Cabinet Door to Frame — Cabinet Door Hinge Replacement</video:title>
      <video:description>Carefully align the cabinet door with the cabinet frame, positioning the newly installed hinge to match the screw holes on the frame. Start by driving one screw into the top hinge, then one into the bottom hinge, to temporarily hold the door in place. Once the door is roughly aligned, insert and tighten the remaining screws into both hinges, ensuring the door is properly seated and operates smoothly. It&apos;s helpful to have a second person assist with holding the door for this step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-dGmgGFVDwA</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10103-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DSS4zgma6gw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reattach the Cabinet Door — Cabinet Door Hinge Replacement</video:title>
      <video:description>To reattach the cabinet door, align the hinge arms with the slots on their respective mounting plates on the cabinet frame. Carefully slide the hinge arms downwards until they are securely seated in the plates. Ensure both hinges are properly engaged before proceeding to tighten the screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DSS4zgma6gw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10103-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/glmF-9MqqCU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Hinge on Cabinet Frame — Cabinet Door Hinge Replacement</video:title>
      <video:description>With the hinge attached to the door, position the door so that the hinge plate aligns with the existing screw holes on the cabinet&apos;s side wall. Insert the first screw into one of the aligned holes, but do not fully tighten it yet. This allows for slight adjustments. Then, insert and partially tighten the second screw into the remaining hole. Once both screws are in place, fully tighten them, ensuring the hinge is securely fastened to the cabinet. If the holes do not align, or if they are stripped, refer to the &apos;Alternative Installation for New Holes&apos; step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/glmF-9MqqCU</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10104-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RJDgIPKiEig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Final Check and Adjustment — Cabinet Door Hinge Replacement</video:title>
      <video:description>After re-attaching all hinges, perform a final check of the cabinet door. Ensure that it lines up perfectly with adjacent cupboards or drawers, avoiding any gaps or overlaps. Test the door by opening and shutting it several times to confirm smooth operation. If the door doesn&apos;t align correctly or doesn&apos;t open/close well, minor adjustments can be made using the adjustment screws on the hinge (for screw-release types) or by slightly repositioning quick-release hinges if they allow for it. The goal is a seamless fit and effortless function.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RJDgIPKiEig</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10104-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/glmF-9MqqCU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust Hinges for Proper Alignment — Cabinet Door Hinge Replacement</video:title>
      <video:description>After the new hinge is securely installed, you&apos;ll likely need to make adjustments to ensure the cabinet door aligns perfectly with the cabinetry and any adjacent doors. Modern soft-close hinges typically have three adjustment screws: 1. The screw indicated by the presenter, often located towards the front of the hinge, adjusts the door &apos;in or out&apos; from the cabinet. 2. A second screw, usually part of the mounting plate, moves the door &apos;up or down&apos; by raising or lowering the plate. 3. A third screw, typically located horizontally on the hinge, moves the door &apos;horizontally&apos; across the face of the cabinet. Use a screwdriver to turn these screws incrementally, testing the door alignment after each adjustment until it sits flush and operates smoothly. The video demonstrates horizontal adjustment, noting that for a two-door cabinet, this helps align them to the center.</video:description>
      <video:player_loc>https://www.youtube.com/embed/glmF-9MqqCU</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10104-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NENDZGTFoWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Secure Hinges — Cabinet Door Hinge Replacement</video:title>
      <video:description>After completing all three adjustments—horizontal, depth, and vertical—close the cabinet door and visually inspect it. Check the gaps around the door, ensuring they are consistent and that the door aligns perfectly with any adjacent doors. Confirm that the door opens and closes smoothly without rubbing and that it sits flush against the cabinet carcass when closed. Once satisfied with the alignment, double-check that all hinge screws are tightened securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NENDZGTFoWI</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10093-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Ojo7ObonCc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect the Flapper and Chain — Running Toilet Repair</video:title>
      <video:description>Remove the lid from the toilet tank and visually inspect the components. Check the chain that connects the flush handle lever to the flapper. If the chain is too tight, it can prevent the flapper from sealing. If it&apos;s too loose, it may get caught under the flapper. Also, inspect the flapper itself. Lift it and check for any signs of warping, brittleness, or damage that would prevent it from creating a watertight seal over the flush valve opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Ojo7ObonCc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10093-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Ojo7ObonCc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect the Flapper and Chain — Running Toilet Repair</video:title>
      <video:description>Remove the lid from the toilet tank and visually inspect the components. Check the chain that connects the flush handle lever to the flapper. If the chain is too tight, it can prevent the flapper from sealing. If it&apos;s too loose, it may get caught under the flapper. Also, inspect the flapper itself. Lift it and check for any signs of warping, brittleness, or damage that would prevent it from creating a watertight seal over the flush valve opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Ojo7ObonCc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10093-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jv_j0imGHM8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Flush Valve (Flapper) — Running Toilet Repair</video:title>
      <video:description>Another potential cause of a leak is a dirty flush valve (flapper) itself. Over time, the rubber or plastic material of the flapper can accumulate grime, mold, or mineral deposits, preventing it from seating correctly on the flush valve opening. Remove the flapper from its pivots (if applicable) or lift it to thoroughly clean both its top and bottom surfaces. Again, use a sponge with some cleaner to ensure all surfaces that come into contact with the flush valve opening are spotless. A clean flapper will create a much better seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jv_j0imGHM8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10094-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mzgvPAQaSs8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flapper and Adjust Chain — Running Toilet Repair</video:title>
      <video:description>Before installing, check if your new flapper has an adjustable dial for controlling water usage and set it if necessary. Attach the new flapper by clipping its arms onto the overflow tube pegs. Connect the chain to the flush handle lever, ensuring there is about a half-inch of slack in the chain when the flapper is closed. You may need to move the clip to a different chain link to achieve the correct length.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mzgvPAQaSs8</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10094-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8TYdOXs3VIo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Flapper and Install New One — Running Toilet Repair</video:title>
      <video:description>First, unhook the chain of the old flapper from the flush handle lever. Then, unclip the two rubber &apos;ears&apos; of the flapper from the small posts on either side of the overflow pipe&apos;s base. Lift the old flapper out of the tank and discard it. Take the new flapper and clip its two ears onto the same posts on the overflow pipe. Finally, attach the new chain to an appropriate hole on the flush handle lever.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8TYdOXs3VIo</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10094-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LkJS-uQDXog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flapper — Running Toilet Repair</video:title>
      <video:description>Install the new flapper into the toilet tank. First, re-attach the flapper&apos;s &apos;ears&apos; or hinges onto the overflow tube at the base of the flush valve, ensuring they are securely seated. Next, connect the adjusted chain to the flush handle lever, making sure there is appropriate slack and the chain doesn&apos;t interfere with the flapper&apos;s movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LkJS-uQDXog</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10097-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lQQ8j0dIgIs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Flush Valve Seat — Running Toilet Repair</video:title>
      <video:description>Inspect the flush valve seat where the flapper rests. If it&apos;s dirty, has mineral buildup, or debris, wipe it clean with a cloth or a paper towel. A clean valve seat ensures a tight seal with the new flapper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lQQ8j0dIgIs</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10097-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OdyPZOKBqTU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Inspect Flush Valve Seat — Running Toilet Repair</video:title>
      <video:description>Before installing the new flapper, inspect and clean the flush valve seat, which is the circular rim that the flapper rests on. Use your fingers or a soft cloth to wipe away any mineral deposits, rust, or debris. A smooth, clean surface is essential for the new flapper to create a watertight seal. Feel for any nicks or cracks in the plastic, as this would indicate the entire flush valve needs to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OdyPZOKBqTU</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10097-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uyCyQa8H8Pk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Flush Valve and Flapper Seal — Running Toilet Repair</video:title>
      <video:description>Next, inspect the flush valve, specifically the flapper seal. Clean any debris or mineral deposits from the flapper and its seat. Check for any leaks or damage to the flapper seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uyCyQa8H8Pk</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10096-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PF6gKvlxICA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust Fill Valve Height — Running Toilet Repair</video:title>
      <video:description>If you determined in the previous step that the water level is rising above the top of the flush valve overflow tube, the fill valve&apos;s height may be incorrect. First, confirm that the waterline mark on your fill valve is set to the same height as the toilet&apos;s manufacturer&apos;s water line. If the manufacturer&apos;s waterline isn&apos;t visible, set the waterline on the fill valve 1/2 inch below the top of the flush valve overflow tube. If the valve is currently set too high, turn off the water supply to the toilet (usually a small valve near the base of the toilet on the wall). Flush the toilet to empty the tank. If your fill valve has a tamperproof key (like the Korky QuietFill valve), remove it. Adjust the height of the fill valve by twisting the top half of the valve counter-clockwise, pushing it down until the correct water level is set, and then turning it clockwise until it snaps into the locked position. Finally, reinstall the tamperproof key if it was present, and turn the water supply back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PF6gKvlxICA</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10096-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SKx-ZVc0u0E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Fill Valve — Running Toilet Repair</video:title>
      <video:description>As the tank is refilling, or after it should have stopped, use your finger to gently press down on the top of the fill valve float. This action manually stops the flow of water into the tank, simulating the float reaching its highest position. Listen carefully. If the sound of running water stops when you press down on the float, it indicates that the fill valve is the source of the leak because it is not shutting off on its own.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SKx-ZVc0u0E</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10096-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yXPPsLz1MMQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust Fill Valve Float — Running Toilet Repair</video:title>
      <video:description>If your diagnosis in the previous step indicated that lifting the fill valve arm stopped the water flow, then the fill valve float needs to be lowered. For a Fluidmaster fill valve, locate the float adjustment screw, which is typically at the top of the fill valve arm, and turn it counterclockwise for a few turns. This action will lower the float and, consequently, the water level when the tank refills. To test the new water level, gently lift the flapper by its chain to drain some water from the tank. Once the water has drained, release the flapper to allow the tank to refill. The water level should now stop filling approximately one-half to one inch (0.5&quot;-1&quot;) below the top of the overflow pipe. If the water level is still too high, repeat this adjustment process as needed until the correct level is achieved.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yXPPsLz1MMQ</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10091-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H5A4mGqjhH4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush and Empty Toilet Tank — Running Toilet Repair</video:title>
      <video:description>Press the toilet flush lever and hold it down for 10 to 15 seconds. This action flushes the toilet and ensures that the tank completely empties of water, allowing you to work on the internal components without spillage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H5A4mGqjhH4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10091-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0HLD8jq9kZs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Empty the tank — Running Toilet Repair</video:title>
      <video:description>Flush the toilet to empty the tank. Hold the lever down to ensure as much water as possible drains out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0HLD8jq9kZs</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10091-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0HLD8jq9kZs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Empty the tank — Running Toilet Repair</video:title>
      <video:description>Flush the toilet to empty the tank. Hold the lever down to ensure as much water as possible drains out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0HLD8jq9kZs</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10095-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/13lBoZTifug/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Leak Cause — Running Toilet Repair</video:title>
      <video:description>If you notice water constantly running into your toilet tank and overflowing into the overflow tube, the fill valve is likely the problem. If water runs intermittently but does not flow into the overflow tube, then the flapper is probably the culprit. To diagnose, remove the toilet tank lid and place it in a safe, flat location to prevent it from breaking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/13lBoZTifug</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10095-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PF6gKvlxICA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Water Level Against Overflow Tube — Running Toilet Repair</video:title>
      <video:description>To begin troubleshooting, observe the water level inside your toilet tank. Determine whether the water level is rising above the top of the flush valve overflow tube. This initial observation will help diagnose if the fill valve is set too high, causing overfilling, or if there&apos;s a flapper leak allowing water to escape, causing the fill valve to activate unnecessarily.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PF6gKvlxICA</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10095-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X0KXt_TEGIk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill Valve Inspection — Running Toilet Repair</video:title>
      <video:description>Examine the fill valve, the mechanism that brings water into the tank, to check if it continues to flow water even after the tank has filled to its correct level. The float on the fill valve should rise and shut off the water supply when the tank is full. A faulty diaphragm or seal within the fill valve will prevent this shut-off, leading to water constantly flowing into the flush valve&apos;s overflow tube and into the bowl. Also, check if the refill tube from the fill valve is submerged below the water line, as this can cause siphoning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X0KXt_TEGIk</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10092-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2DTNLwuigTw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Toilet Tank Lid — Running Toilet Repair</video:title>
      <video:description>To access the internal components, carefully lift the toilet tank lid straight up. Be cautious as it is made of porcelain and can be heavy and fragile. Set the lid down gently in a safe place where it won&apos;t be broken, such as on a towel on the bathroom floor or flat on the closed toilet seat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2DTNLwuigTw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10092-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EvCAC8Bl4wo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Toilet Tank Lid — Running Toilet Repair</video:title>
      <video:description>Carefully lift and remove the toilet tank lid. Place the lid in a safe, secure location where it won&apos;t be accidentally dropped or broken. Many plumbers have broken these lids, which can be costly and difficult to replace.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EvCAC8Bl4wo</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10092-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e3_vK2NniYw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Toilet Tank Lid — Running Toilet Repair</video:title>
      <video:description>Carefully remove the toilet tank lid. This lid is typically made of ceramic and can be heavy and fragile. Place it in a secure and safe location, away from where it might be accidentally bumped or fall, to prevent breakage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e3_vK2NniYw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10090-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2RsnLbqcEVU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Supply — Running Toilet Repair</video:title>
      <video:description>Locate the water shut-off valve, typically on the wall behind the toilet. Turn the valve handle clockwise all the way to stop the flow of water to the toilet tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2RsnLbqcEVU</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10090-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mpMjfEa5qVk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Supply — Running Toilet Repair</video:title>
      <video:description>Locate the water supply shut-off valve, which is typically found on the wall or floor behind the toilet and connected by a hose to the toilet tank. Turn the valve handle clockwise until it is fully closed to stop the flow of water to the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mpMjfEa5qVk</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10090-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H5A4mGqjhH4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — Running Toilet Repair</video:title>
      <video:description>Locate the water supply valve connected to the toilet, usually found on the wall or floor behind the toilet. Turn the valve clockwise to completely shut off the water supply to the toilet tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H5A4mGqjhH4</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10098-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/D5QXwNe-r1s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Adjust — Running Toilet Repair</video:title>
      <video:description>Turn the water supply back on by rotating the shut-off valve counter-clockwise. Allow the toilet tank to fill completely. Observe the water level to ensure it stops at the appropriate mark, usually indicated inside the tank or on the fill valve itself. Adjust the float on the fill valve as needed to achieve the correct water level. Finally, test the flush several times to ensure both the fill valve and flapper are working correctly, and check for any leaks. Once satisfied, place the toilet tank lid back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/D5QXwNe-r1s</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10098-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZM3_Dct5f_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water and Test — Running Toilet Repair</video:title>
      <video:description>Turn the water shut-off valve counter-clockwise to turn the water supply back on. Allow the tank to fill completely with water. Once the fill valve stops, listen to ensure the toilet is no longer running. Perform a test flush by pressing the handle. Observe the flapper to make sure it lifts high enough for a full flush and then settles back down to create a firm seal. If the flush is too short or long, you may need to adjust the settings on the flapper itself, if available.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZM3_Dct5f_w</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10098-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R2-DqrJFB7c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Test — Running Toilet Repair</video:title>
      <video:description>Carefully place the tank lid back onto the toilet tank. Turn the water shut-off valve counter-clockwise to restore the water supply. Allow the tank to fill completely. Once full, listen to ensure the water stops running. The repair is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R2-DqrJFB7c</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10083-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/w1O60cr5e88/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove retaining nut or clip — Faucet Repair</video:title>
      <video:description>Once the handle is removed, you will see the faucet cartridge. There may be a retaining nut or clip holding it in place. Use adjustable pliers or a wrench to carefully unscrew the retaining nut or remove the clip to free the cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/w1O60cr5e88</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10083-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lW4fFBY6g_s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Retaining Nut and Cartridge — Faucet Repair</video:title>
      <video:description>With the handle removed, you will see a retaining nut that holds the cartridge in place. To avoid scratching the faucet&apos;s finish, wrap a cloth or paper towel around the retaining nut. Use channel locks or an adjustable wrench to carefully unscrew and remove this retaining nut. Once the nut is off, gently pull the old cartridge straight up and out of the faucet body. Inspect the cartridge for any visible damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lW4fFBY6g_s</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10083-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CqIuYm_rvuA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Retaining Nut and Cartridge — Faucet Repair</video:title>
      <video:description>With the handle removed, you will see a retaining nut (often brass or chrome) holding the cartridge in place. Use an adjustable wrench to turn this nut counter-clockwise to loosen and remove it. Once the nut is off, you can firmly grasp the stem of the old cartridge and pull it straight up and out of the faucet body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CqIuYm_rvuA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10084-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pyBTL7GugHo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Cartridge — Faucet Repair</video:title>
      <video:description>Unscrew the black plastic retainer nut. Next, use a small tool or screwdriver to carefully pry up and pull out the U-shaped copper retainer clip that holds the cartridge in place. Grab the stem of the old cartridge with a pair of pliers and pull it straight out of the valve body. A dedicated cartridge puller tool may be needed if it&apos;s stuck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pyBTL7GugHo</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10084-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pyBTL7GugHo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Cartridge — Faucet Repair</video:title>
      <video:description>Unscrew the black plastic retainer nut. Next, use a small tool or screwdriver to carefully pry up and pull out the U-shaped copper retainer clip that holds the cartridge in place. Grab the stem of the old cartridge with a pair of pliers and pull it straight out of the valve body. A dedicated cartridge puller tool may be needed if it&apos;s stuck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pyBTL7GugHo</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10084-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z9Bim3tU3sg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove cartridge retaining clip and old cartridge — Faucet Repair</video:title>
      <video:description>Locate the retaining clip that holds the cartridge in place. This clip may require pliers to gently pry it out. Once removed, the old cartridge can be pulled out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z9Bim3tU3sg</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10087-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ge0AOYZLgV0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall retainer clip — Faucet Repair</video:title>
      <video:description>Once the new cartridge is in place, reinsert the retainer clip. Align the ears of the clip with the notches on the cartridge and push it down until it snaps into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ge0AOYZLgV0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10087-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VBLHEz26J4w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall packing nut — Faucet Repair</video:title>
      <video:description>Once the new cartridge is in place, reattach the packing nut. Screw it back on by hand first to ensure it&apos;s not cross-threaded, then use your pliers or wrench to tighten it securely. Do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VBLHEz26J4w</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10087-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bfVJRvADXpw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fasten the Retainer Nut — Faucet Repair</video:title>
      <video:description>Once the new cartridge is seated, reapply the retainer nut over the cartridge. Hand-tighten it as much as possible, then use your pliers to tighten it securely. Do not overtighten, but ensure it&apos;s snug enough to hold the cartridge firmly in place and prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bfVJRvADXpw</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10080-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JbobHlxWabU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply and Verify — Faucet Repair</video:title>
      <video:description>Locate the hot and cold water shut-off valves, which are typically found in the cabinet directly beneath the sink. Turn the handles on both valves clockwise until they are fully closed. This will stop the water supply to the faucet. After shutting them off, turn the faucet handle on to drain any residual water and verify that the flow has stopped.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JbobHlxWabU</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10080-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JbobHlxWabU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply and Verify — Faucet Repair</video:title>
      <video:description>Locate the hot and cold water shut-off valves, which are typically found in the cabinet directly beneath the sink. Turn the handles on both valves clockwise until they are fully closed. This will stop the water supply to the faucet. After shutting them off, turn the faucet handle on to drain any residual water and verify that the flow has stopped.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JbobHlxWabU</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10080-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8fJlp34FW80/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn off the Water — Faucet Repair</video:title>
      <video:description>Find the hot and cold shutoff valves for the faucet, usually located beneath the sink. Turn both valves clockwise to shut off the water supply.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8fJlp34FW80</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10081-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CP0YXKNd91A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Faucet Brand — Faucet Repair</video:title>
      <video:description>Identify the brand of your faucet so you can purchase the correct replacement cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CP0YXKNd91A</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10081-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e2W2E-1RryY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Faucet Brand — Faucet Repair</video:title>
      <video:description>Identify the brand or make of the shower faucet. This information is typically located on the escutcheon plate, usually near the &apos;off&apos; indicator. In this video, the faucet is identified as a &apos;Moen&apos; model. Knowing the brand is crucial for purchasing the correct replacement cartridge, although the general procedure is similar for common brands like Delta and Moen.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e2W2E-1RryY</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10081-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ED54ngQonDo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Find replacement cartridges — Faucet Repair</video:title>
      <video:description>Check the label on the faucet for the model number. Look up the model number on the manufacturer&apos;s website to find the correct replacement cartridges.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ED54ngQonDo</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10082-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fqAjKh4sAGg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Faucet Handle — Faucet Repair</video:title>
      <video:description>First, use a small, pointed tool (like a pick or flat-head screwdriver) to carefully pry off the decorative cap from the top of the faucet handle. Once the cap is removed, locate the retaining screw inside. Use an appropriate screwdriver (often Phillips head) to loosen and remove this screw. With the screw removed, pull the faucet handle straight up and off the stem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fqAjKh4sAGg</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10082-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s8bpfAP9GYQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — Faucet Repair</video:title>
      <video:description>Use a small, pointed tool like a dental pick or a small flathead screwdriver to carefully pry off the decorative cap on the front of the faucet handle. This will expose the set screw. Insert an Allen wrench into the set screw and turn it counter-clockwise to loosen it. You do not need to remove the screw completely. Once loose, lift the handle straight up to remove it from the faucet body. Then, unscrew the chrome decorative dome cover by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s8bpfAP9GYQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10082-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s8bpfAP9GYQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Faucet Handle — Faucet Repair</video:title>
      <video:description>Use a small, pointed tool like a dental pick or a small flathead screwdriver to carefully pry off the decorative cap on the front of the faucet handle. This will expose the set screw. Insert an Allen wrench into the set screw and turn it counter-clockwise to loosen it. You do not need to remove the screw completely. Once loose, lift the handle straight up to remove it from the faucet body. Then, unscrew the chrome decorative dome cover by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s8bpfAP9GYQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10085-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pi2tN0aZMk4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean faucet body — Faucet Repair</video:title>
      <video:description>Clean the inside of the faucet body where the cartridge sits. Remove any mineral deposits, debris, or old sealant using a cloth and possibly a small brush or scraper. A clean surface ensures a good seal for the new cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pi2tN0aZMk4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10085-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VBLHEz26J4w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean faucet body — Faucet Repair</video:title>
      <video:description>Before installing the new cartridge, clean the inside of the faucet body where the old cartridge was removed. Wipe away any debris or mineral buildup with a rag or paper towel. This ensures a good seal for the new cartridge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VBLHEz26J4w</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10085-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FJOqYL9ollE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Faucet Body — Faucet Repair</video:title>
      <video:description>With the handle and internal components removed, clean the grooves and threads inside the faucet body where the cartridge will sit. Use an old toothbrush to scrub away any mineral deposits, grime, or debris. After brushing, wipe the area thoroughly with a piece of paper towel to ensure all loose particles are removed. A clean seating surface is crucial for the new cartridge to function properly and prevent future leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FJOqYL9ollE</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10086-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Im0kpjATo5A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Faucet Cartridge — Faucet Repair</video:title>
      <video:description>Align the new cartridge with the faucet body. Note the orientation: the &apos;half-moon&apos; key or stopper portion on the cartridge must line up with the corresponding offset hole at the bottom of the faucet body. Carefully push the cartridge down firmly until it clicks or seats completely into place. Ensure it is fully depressed and level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Im0kpjATo5A</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10086-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VBLHEz26J4w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install new cartridge — Faucet Repair</video:title>
      <video:description>Insert the new faucet cartridge into the faucet body. Ensure it is oriented correctly, aligning any notches or grooves with those in the faucet body. Push it down firmly until it is seated properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VBLHEz26J4w</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10086-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wcT1BKJE7WM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Cartridge — Faucet Repair</video:title>
      <video:description>Carefully insert the new cartridge into the faucet body, ensuring it is positioned exactly the same way as the old one. Pay close attention to any alignment pegs on the cartridge and make sure they properly line up with the corresponding holes or slots in the faucet body. Verify that the cartridge is correctly seated and aligned before proceeding. Finally, replace any retainer nuts or clips that were removed in the earlier step to securely hold the new cartridge in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wcT1BKJE7WM</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10088-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C78BQik6-ag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace handle and set screw — Faucet Repair</video:title>
      <video:description>Place the faucet handle back onto the stem and secure it by tightening the set screw using the Allen wrench. Ensure the handle is firmly attached.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C78BQik6-ag</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10088-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ng484pwhBRI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reattach Faucet Handle — Faucet Repair</video:title>
      <video:description>With the base secured, place the faucet handle back onto the stem, aligning the set screw hole. Insert the 7/64 inch Allen wrench into the set screw and turn it clockwise to tighten it, securing the handle in place. Once the handle is firm, snap the hot/cold indicator cap back onto the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ng484pwhBRI</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10088-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VBT4gQNaqWM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reattach Faucet Handle — Faucet Repair</video:title>
      <video:description>Place the faucet handle back onto the faucet stem, aligning it properly. Secure the handle by tightening the screw with a screwdriver. Finally, snap the decorative cap back into place on top of the handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VBT4gQNaqWM</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10089-1</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s8bpfAP9GYQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Test — Faucet Repair</video:title>
      <video:description>Go back under the sink and turn the water shut-off valve handles counter-clockwise to restore the water supply. Return to the faucet and operate the handle, turning the water on and off for both hot and cold. Carefully inspect the base of the handle and faucet for any signs of leaking. If no leaks are present, the repair is successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s8bpfAP9GYQ</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10089-2</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ng484pwhBRI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water Supply and Test Faucet — Faucet Repair</video:title>
      <video:description>Go back under the sink and turn the hot and cold water supply valves back on. Return to the sink and slowly open the faucet handle to test the water flow for both hot and cold. Check for any leaks around the base of the faucet and connections under the sink. Confirm that the hot and cold water mix properly and that the faucet turns completely off without dripping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ng484pwhBRI</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10089-3</loc>
    <lastmod>2026-11-13T02:46:11.606Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JbobHlxWabU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Test for Leaks — Faucet Repair</video:title>
      <video:description>Go back under the sink and slowly turn both the hot and cold water shut-off valves counter-clockwise to restore the water supply. Return to the faucet, ensure the handle is in the off position, and check for any leaks around the base. Then, slowly turn the handle on and test both the hot and cold water flow. Check again for leaks while the water is running. Turn the faucet off and confirm that the original leak has been resolved.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JbobHlxWabU</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T02:46:11.606Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10062-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AcZm4RFx6fw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose the Leak Source — Sink Repair</video:title>
      <video:description>The video (0:09-0:11) shows a clear visual of water dripping from under a kitchen sink. For any DIY sink repair, the crucial first step is to accurately diagnose the source of the leak. This involves visually inspecting all plumbing connections, the P-trap, the faucet base, and drain assembly. To help pinpoint the exact location, run water through the sink while using a flashlight and wiping suspected areas with a paper towel or tissue to observe fresh drips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AcZm4RFx6fw</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10062-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BhHagzqkG1w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose the Leak — Sink Repair</video:title>
      <video:description>Begin by observing the plumbing under the sink. Turn on the faucet and fill the sink basin. Then, release the drain stopper and let the water flow through the P-trap. Carefully watch all pipe connections to pinpoint the exact source of the leak. In the video, a drip is clearly visible at a slip-nut connection on the P-trap, which confirms the location of the problem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BhHagzqkG1w</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10062-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X6Ebv51Z9Xw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — Sink Repair</video:title>
      <video:description>Turn on the water at the faucet. Let it run for a minute, then plug the drain and fill the sink basin with a few inches of water. Once filled, release the stopper and let all the water drain out at once. While the water is draining, use a flashlight and a dry paper towel to check every connection point under the sink for any signs of moisture or drips. Ensure the repair is completely dry.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X6Ebv51Z9Xw</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10020-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Enb5bQ_uYac/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Polyurethane Finish to Treads — Stair Treads</video:title>
      <video:description>Using a good quality paint brush, apply the polyurethane to the stair treads. Work with the grain of the wood, using nice, even strokes. The goal is to achieve a smooth and consistent coat without drips or brush marks. For the final pass on each tread, make one long, continuous stroke with the grain to even out the finish. The presenter recommends applying three coats of polyurethane for maximum durability. Allow each coat to dry for a couple of hours (refer to product instructions for exact drying times), then lightly sand the surface with a fine-grit sandpaper (e.g., 220-grit) and wipe clean with a tack cloth before applying the next coat. This inter-coat sanding helps to smooth out any imperfections and ensures better adhesion for subsequent layers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Enb5bQ_uYac</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10020-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrqO6WsnouE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Stained Treads — Stair Treads</video:title>
      <video:description>After the stain has completely dried, apply four coats of a clear sealant, such as Varathane NanoDefence Premium Clear Floor Finish (Satin), to protect the treads. Apply thin, even coats, allowing each coat to dry for the recommended time (2 hours for re-coat) before applying the next. This step will protect the stained wood from wear and tear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrqO6WsnouE</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10020-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AI1poE8dn10/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Stain and Seal Treads — Stair Treads</video:title>
      <video:description>Apply painter&apos;s tape to the perimeter of the treads, along the stringers and risers, to protect them from stain and polyurethane. Apply your chosen wood stain to the oak plywood treads and bullnose using a cloth or brush. The video creator initially used &apos;Early American&apos; but found it too brown, so a second coat of a &apos;beige&apos; tone was applied to achieve a greyish shade that matched the existing flooring. Continue applying coats of stain until the desired color is achieved. Once the stain is dry, apply a single coat of Minwax One Coat Polyurethane to the stained treads and bullnose using a natural bristle brush. Ensure even coverage and smooth out any brush marks with light strokes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AI1poE8dn10</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10021-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fit Tread and Nosing — Stair Treads</video:title>
      <video:description>Once the stair tread and nosing pieces are cut, bring them back to the stairs for a dry fit. Place them into their final positions without adhesive to ensure all cuts are perfect and the pieces fit snugly against the riser and along the stair&apos;s edges. Make any necessary micro-adjustments at this stage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10021-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit Laminate Pieces to Each Tread — Stair Treads</video:title>
      <video:description>Prior to applying any adhesive, carefully place all the freshly cut laminate pieces, including both the nosing and the main tread pieces, onto their respective stair tread. This &apos;dry-fit&apos; allows you to ensure that all pieces fit perfectly. Visually inspect for tight seams, check for flush edges against the wall, and confirm proper alignment with the nosing. Make any necessary minor adjustments to the cuts at this stage before final installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10021-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit and Adjust Treads — Stair Treads</video:title>
      <video:description>Once a new stair tread has been cut, take it inside and test its fit on the corresponding stair. Place it gently into position to check for proper length and alignment. The presenter found that some of her cuts, made conservatively, were still slightly too long. If a tread doesn&apos;t fit perfectly, take it back to your cutting area and trim off just a tiny bit more to achieve a snug fit, then re-test.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10022-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fgKYII9TM7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stair Structure — Stair Treads</video:title>
      <video:description>After removing the old stair tread, thoroughly clean the exposed stair stringers and riser. Use a hammer and a pry bar or pliers to remove any remaining nails, staples, or debris from the wood surfaces. This ensures a clean and flat surface for the new stair tread to sit flush and bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fgKYII9TM7E</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10022-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2rkFnsTztog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Existing Stairs for Installation — Stair Treads</video:title>
      <video:description>Before installing the new riser and tread pieces, sand the existing wooden stair treads with 80-grit sandpaper to rough up the surface. This creates a better bonding surface for the adhesive and helps remove any paint drips. Thoroughly vacuum all dust and debris from the stairs to ensure a clean surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2rkFnsTztog</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10022-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9iOsbprpe5g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Carpet &amp; Prepare Subtreads — Stair Treads</video:title>
      <video:description>The project begins by showing existing carpeted stairs, which are then stripped of their old carpet, revealing the wooden subtreads and risers underneath. To enhance stability and prevent future squeaks, 2-inch deck screws are driven into the subtreads using a Milwaukee cordless drill. Subsequently, the installer carefully checks for any exposed staples or nails left over from the carpet installation, removing them with a hammer or pry tool, or hammering them flush with the wood surface. This ensures a perfectly smooth and clean base, essential for the proper installation of the new treads and risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9iOsbprpe5g</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10023-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hOcPPO4LRfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Treads — Stair Treads</video:title>
      <video:description>Apply a generous bead of construction adhesive along the top edge of the riser and along any stringer supports that the tread will rest on. This adhesive will act as a lubricant, aiding in the installation of the tread into the dado, and will also help secure the tread, preventing future squeaks. Carefully slide the new tread with its rabbit cut into the dado of the riser. Once the tread is properly seated, use a nail gun with 2.5-inch 8-penny finish nails to secure the tread in place. Repeat this process for all remaining treads and risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hOcPPO4LRfI</video:player_loc>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10023-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Your Treads — Stair Treads</video:title>
      <video:description>In some cases, you may need to install risers before installing your new treads. If this is the case, use construction adhesive and finish nails to secure them. After this, install the treads by applying construction adhesive on the top and front of the nosing of the sub-treads of the stairs. Then, use 1 1/2-inch finish nails with a finish nailer to attach the replacement treads securely. Repeat this step for each of your treads, working your way up the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10023-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Tread — Stair Treads</video:title>
      <video:description>After the riser is installed, it&apos;s time for the new stair tread. First, set the pre-cut tread in place without adhesive to ensure a proper dry fit. Once confirmed, remove the tread and apply a thick bead of polyurethane construction adhesive around the entire perimeter of the back of the tread. Then, apply a zigzag pattern of adhesive across the center of the tread for maximum hold. Carefully place the stair tread back into position, ensuring a 1/16 inch expansion gap all around. To secure, nail the tread within a quarter inch of the back edge only, as the next riser will hide these nail holes. If you are not installing optional risers, you will need to use matching wood putty to fill these nail holes later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10019-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hVs1YaoZyKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Carefully Remove Old Treads — Stair Treads</video:title>
      <video:description>Carefully remove the old, damaged deck treads. For boards that are already loose, gently pry them up with a large screwdriver, avoiding excessive force. If a board is tightly secured, do not immediately reach for a pry bar, as this can damage the fragile stair stringers underneath. Instead, use a large screwdriver and a hammer to split the board into pieces by driving the screwdriver beside the nail heads. This action forces the wood grain around the nails to split, allowing the pieces to be removed easily without stressing the stringers. For very stubborn boards that require more force, use a pry bar, but apply leverage as slowly and carefully as possible. It is crucial to prevent damage to the stair stringers, which are the structural pieces below the treads. These stringers are shaped like a sawtooth, with diagonal grain lines that make them very weak and prone to fracturing. Avoid hitting them sideways or applying excessive leverage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hVs1YaoZyKA</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10019-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/diTxF53fdrA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Physically Remove Old Stair Treads — Stair Treads</video:title>
      <video:description>For the initial removal of the old stair treads, which were extensively glued and nailed, the video suggests using robust tools. Insert a crowbar underneath the edge of an old tread, and then use a sledgehammer to drive the crowbar deeper, creating leverage. Pry the tread upwards forcefully. It&apos;s important to note that the treads, often made of composite wood, are likely to break into multiple pieces during this process due to the strong adhesive. The video shows broken pieces with nails still attached, indicating the force needed and the integrity of the original installation. After the main pieces are detached, extract any exposed, large nails from the underlying wooden structure using the claw of a hammer or the crowbar.</video:description>
      <video:player_loc>https://www.youtube.com/embed/diTxF53fdrA</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10019-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KMoh0dp78ek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Wooden Treads — Stair Treads</video:title>
      <video:description>With the new treads prepared, it&apos;s time to remove the old wooden treads that were beneath the carpet. Use a pry bar and hammer to carefully pry up each old tread from the stair stringers. The video shows the treads being removed one by one, exposing the framework beneath. Collect the removed treads and any remaining nails for disposal. After removing all old treads, clean up any debris, dust, or old adhesive from the stringers and risers, possibly using a vacuum or shop vac, to ensure a clean surface for the new tread installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KMoh0dp78ek</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10024-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Treads — Stair Treads</video:title>
      <video:description>After the risers are installed, measure the depth and length of each individual stair tread. According to these measurements, cut your new hardwood treads. It&apos;s crucial to be accurate, as even small errors can lead to visible gaps. You may need to make slight adjustments to ensure a gap-free fit. A track saw, set at a 5-degree angle as demonstrated, can be particularly useful for making precise, straight cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10024-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — Stair Treads</video:title>
      <video:description>Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10024-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Stair Treads</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10003-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hOcPPO4LRfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Loose Risers — Stair Tread Installation</video:title>
      <video:description>Before proceeding, inspect the exposed risers for any looseness. If a riser is loose or not tight against the skirt board, use a hammer to gently tap the riser outwards from behind until it&apos;s snug against the skirt board. To secure it in place, insert a wooden shim into the gap behind the riser. Apply construction adhesive to the shim before driving it in to ensure a firm hold. Repeat this process for all accessible loose risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hOcPPO4LRfI</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10003-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YAi3vAulu7A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Stair Structure and Plan Riser Installation — Stair Tread Installation</video:title>
      <video:description>Analyze the existing stair structure. The primary issue is that the old treads (the horizontal part) hung over the risers (the vertical part), creating a gap. The underlying wood is often &apos;crummy&apos; and unsuitable for direct finishing. The solution proposed is to install new, primed 1x8 pine boards as risers to cover the gap and provide a clean, flush surface for the new treads. Small blocks are shown being used as temporary spacers or permanent supports behind the risers to prevent them from pushing back.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YAi3vAulu7A</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10003-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Risers — Stair Tread Installation</video:title>
      <video:description>Start by installing the new risers. Use a pencil to mark the height of the riser on the inner stringer. If the height of the riser is consistent, multiple pieces can be cut in advance using a table saw set at the appropriate angle (e.g., 5 degrees as shown in the video). Apply a strong construction adhesive, such as PL Premium, to the back of the riser before placing it firmly against the existing stair structure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>90</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10004-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N5xVJ2fg2YQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow for Curing and Final Cleanup — Stair Tread Installation</video:title>
      <video:description>Allow the construction adhesive to cure completely. The video mentions a cure time of 2 to 7 days, so avoid stepping on the newly repaired steps during this period to allow the adhesive to fully bond and strengthen. The man places a traffic cone as a visual reminder to prevent anyone from walking on the step prematurely. After the curing time, blow away any residual dirt or debris from the area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N5xVJ2fg2YQ</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10004-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XF5qIw-yOMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Glue to Cure and Plan Reinforcement — Stair Tread Installation</video:title>
      <video:description>Allow the wood glue to fully cure while the step remains securely clamped. The presenter suggests a curing time of &apos;a few days&apos; for optimal strength. Once the glue is completely dry and strong, carefully remove all clamps, brackets, and screws. Inspect the step to ensure it is now level and firmly re-bonded. The presenter notes that for high-traffic areas, further reinforcement (such as drilling and inserting rods through the step) may be considered to prevent future issues, although this additional step is not detailed in this video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XF5qIw-yOMY</video:player_loc>
      <video:duration>150</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10004-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mjZqhxztKJ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Weights for Adhesive Bonding — Stair Tread Installation</video:title>
      <video:description>Once the wooden pieces are in place on a stair, immediately apply heavy weights, such as metal blocks or other dense objects, to the newly installed wooden tread. This pressure helps to ensure a strong and even bond between the wooden covering and the concrete as the hot adhesive cools and cures. Leave the weights in place for several hours or overnight, as recommended by the adhesive manufacturer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mjZqhxztKJ8</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10005-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrqO6WsnouE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Stained Treads — Stair Tread Installation</video:title>
      <video:description>After the stain has completely dried, apply four coats of a clear sealant, such as Varathane NanoDefence Premium Clear Floor Finish (Satin), to protect the treads. Apply thin, even coats, allowing each coat to dry for the recommended time (2 hours for re-coat) before applying the next. This step will protect the stained wood from wear and tear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrqO6WsnouE</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10005-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Enb5bQ_uYac/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Polyurethane Finish to Treads — Stair Tread Installation</video:title>
      <video:description>Using a good quality paint brush, apply the polyurethane to the stair treads. Work with the grain of the wood, using nice, even strokes. The goal is to achieve a smooth and consistent coat without drips or brush marks. For the final pass on each tread, make one long, continuous stroke with the grain to even out the finish. The presenter recommends applying three coats of polyurethane for maximum durability. Allow each coat to dry for a couple of hours (refer to product instructions for exact drying times), then lightly sand the surface with a fine-grit sandpaper (e.g., 220-grit) and wipe clean with a tack cloth before applying the next coat. This inter-coat sanding helps to smooth out any imperfections and ensures better adhesion for subsequent layers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Enb5bQ_uYac</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10005-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F8eLXPuMBiw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Polyurethane Sealer — Stair Tread Installation</video:title>
      <video:description>Once the stain has completely dried (refer to product instructions for recommended drying times, usually a few hours), it&apos;s time to apply the polyurethane sealer. Sealer is extremely important for high-traffic areas like stair treads as it provides durability and protection against wear and tear. Using a clean paintbrush, apply the polyurethane in the direction of the wood grain. Similar to staining, use cardboard to protect the adjacent white risers and walls, ensuring a clean application line. The biggest tip when working with sealer is to make sure to brush out any drip marks or excess product immediately to avoid visible streaks and uneven finish. Apply multiple thin coats, allowing adequate drying time between each coat, according to the manufacturer&apos;s instructions, for maximum durability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F8eLXPuMBiw</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10006-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Treads — Stair Tread Installation</video:title>
      <video:description>After the risers are installed, measure the depth and length of each individual stair tread. According to these measurements, cut your new hardwood treads. It&apos;s crucial to be accurate, as even small errors can lead to visible gaps. You may need to make slight adjustments to ensure a gap-free fit. A track saw, set at a 5-degree angle as demonstrated, can be particularly useful for making precise, straight cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10006-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — Stair Tread Installation</video:title>
      <video:description>Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10006-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Stair Treads — Stair Tread Installation</video:title>
      <video:description>Each stair in a staircase is often slightly different in length, so it&apos;s crucial to measure and cut each new tread individually. Place an old, removed stair tread side-by-side with a new, uncut tread. Use the old tread as a template to mark the exact length needed on the new tread with a pencil. The presenter uses a circular saw for cutting; a table saw is another suitable option. When operating the circular saw, ensure both hands are firmly on the tool and your feet are well out of the way to prevent accidents, as this is a common point of injury.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10007-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ztC3KfZEjO0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Construction Adhesive — Stair Tread Installation</video:title>
      <video:description>Before installing the newly cut tread, a generous bead of construction adhesive is applied to the horizontal wood supports (ledgers) within the stair frame where the tread will rest. This adhesive (a caulk gun loaded with a tube of adhesive is shown) serves two primary purposes: to firmly bond the tread to the frame and to prevent future squeaks that can arise from wood-on-wood friction as the stairs are used. The adhesive is applied to all contact points, including the vertical stringer/riser faces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ztC3KfZEjO0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10007-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Tread — Stair Tread Installation</video:title>
      <video:description>After the riser is installed, it&apos;s time for the new stair tread. First, set the pre-cut tread in place without adhesive to ensure a proper dry fit. Once confirmed, remove the tread and apply a thick bead of polyurethane construction adhesive around the entire perimeter of the back of the tread. Then, apply a zigzag pattern of adhesive across the center of the tread for maximum hold. Carefully place the stair tread back into position, ensuring a 1/16 inch expansion gap all around. To secure, nail the tread within a quarter inch of the back edge only, as the next riser will hide these nail holes. If you are not installing optional risers, you will need to use matching wood putty to fill these nail holes later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10007-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hOcPPO4LRfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Treads — Stair Tread Installation</video:title>
      <video:description>Apply a generous bead of construction adhesive along the top edge of the riser and along any stringer supports that the tread will rest on. This adhesive will act as a lubricant, aiding in the installation of the tread into the dado, and will also help secure the tread, preventing future squeaks. Carefully slide the new tread with its rabbit cut into the dado of the riser. Once the tread is properly seated, use a nail gun with 2.5-inch 8-penny finish nails to secure the tread in place. Repeat this process for all remaining treads and risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hOcPPO4LRfI</video:player_loc>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10008-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hOcPPO4LRfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Treads — Stair Tread Installation</video:title>
      <video:description>Apply a generous bead of construction adhesive along the top edge of the riser and along any stringer supports that the tread will rest on. This adhesive will act as a lubricant, aiding in the installation of the tread into the dado, and will also help secure the tread, preventing future squeaks. Carefully slide the new tread with its rabbit cut into the dado of the riser. Once the tread is properly seated, use a nail gun with 2.5-inch 8-penny finish nails to secure the tread in place. Repeat this process for all remaining treads and risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hOcPPO4LRfI</video:player_loc>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10008-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Tread — Stair Tread Installation</video:title>
      <video:description>After the riser is installed, it&apos;s time for the new stair tread. First, set the pre-cut tread in place without adhesive to ensure a proper dry fit. Once confirmed, remove the tread and apply a thick bead of polyurethane construction adhesive around the entire perimeter of the back of the tread. Then, apply a zigzag pattern of adhesive across the center of the tread for maximum hold. Carefully place the stair tread back into position, ensuring a 1/16 inch expansion gap all around. To secure, nail the tread within a quarter inch of the back edge only, as the next riser will hide these nail holes. If you are not installing optional risers, you will need to use matching wood putty to fill these nail holes later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10008-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J4Pg0uZ_9Jw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Treads and Risers — Stair Tread Installation</video:title>
      <video:description>Cut the treads (the horizontal walking surface) and risers (the vertical panels) to the exact dimensions required for each step. Precision is key to a snug fit. Apply construction adhesive, commonly referred to as &apos;glue,&apos; to the top of the stringers and the back of the riser where it meets the stringer. This adhesive helps prevent squeaks and adds significant structural strength. Then, carefully install each riser, followed by its corresponding tread. Secure both with appropriate fasteners, such as finish nails or screws, ensuring they are flush and level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J4Pg0uZ_9Jw</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10009-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fit Tread and Nosing — Stair Tread Installation</video:title>
      <video:description>Once the stair tread and nosing pieces are cut, bring them back to the stairs for a dry fit. Place them into their final positions without adhesive to ensure all cuts are perfect and the pieces fit snugly against the riser and along the stair&apos;s edges. Make any necessary micro-adjustments at this stage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10009-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Treads and Secure with Shims/Glue/Nails — Stair Tread Installation</video:title>
      <video:description>Before permanent installation, dry-fit each new tread and riser combination. Check everywhere for a good, tight fit and minimal gaps. While tiny gaps can be filled later, strive for as few as possible to avoid relying on excessive filler. To ensure a gap-free fit at the bottom of the tread against the previous riser, place cardboard shims at the top of the newly installed riser. Apply a generous amount of strong construction adhesive (like PL Premium) to the underside of the new tread, then press it firmly down onto the existing tread and against the riser. Use a nail gun to secure the tread in place by firing nails into the tread and riser.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10009-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9iOsbprpe5g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Retro Treads — Stair Tread Installation</video:title>
      <video:description>Before permanent installation, each cut pre-finished retro tread is dry-fitted to ensure a snug and accurate fit against the installed riser and skirt boards. Once the fit is confirmed, the tread is removed, and a generous serpentine bead of PL Premium construction adhesive is applied to its underside. The tread is then carefully placed back into its position, ensuring perfect alignment. A rubber mallet is used to gently tap the tread into place, promoting good contact with the adhesive and securing a tight fit. Finally, the corners of the tread are reinforced and secured with 2-inch finish nails using a Porter Cable finish nail gun. This installation process is repeated for all remaining treads until the entire staircase is completed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9iOsbprpe5g</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9898-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oybo4oNlBdg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Introduction to Washer Agitation Problems — Washing Machine Repair</video:title>
      <video:description>The video introduces the common problem of a washing machine that spins but fails to agitate. This issue can stem from various components, and the troubleshooting steps vary slightly between top-load and front-load models. The presenter highlights that understanding the machine&apos;s operation is key to diagnosing the fault.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oybo4oNlBdg</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9898-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OvSx-s1nX4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Washing Machine Spin/Drain Issue — Washing Machine Repair</video:title>
      <video:description>Begin by observing the washing machine&apos;s behavior. If it fills with water and agitates but fails to proceed to the spin or drain cycle, this indicates a problem with the spin/drain function. To initiate a quick test cycle, set the wash cycle selector to &apos;Drain &amp; Spin&apos; and the load size to &apos;Small&apos; to minimize the time needed for the cycle to complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OvSx-s1nX4M</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9898-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QYPqpjLV7s4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Program Issues and Fault Codes — Washing Machine Repair</video:title>
      <video:description>Examine the washing machine&apos;s display for any fault codes. Modern machines are designed to shut down and display a fault code (a combination of letters, lights, or numbers) if they detect an internal fault. These codes vary by manufacturer, so consult your machine&apos;s manual. Observe the machine&apos;s initial actions upon powering on: it should lock the door and perform a self-check. If a fault is detected during the self-check or if the door doesn&apos;t lock properly, the machine will shut down and display a fault code. Similarly, during the water fill stage, if the machine doesn&apos;t recognize that it&apos;s filled within a couple of minutes, it will shut down to prevent flooding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QYPqpjLV7s4</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9899-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ImiZRmh0W4o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Depressurize and Unplug — Washing Machine Repair</video:title>
      <video:description>To begin, turn off the water supply by closing the water tap connected to the washing machine. Next, to safely release pressure from the hose, select a 40-degree cycle on your washing machine and let it run for 40 seconds before stopping the program. Finally, for your safety, unplug the washing machine from the electrical outlet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ImiZRmh0W4o</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9899-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IzC4BldiwIc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Repair and Disconnect Utilities — Washing Machine Repair</video:title>
      <video:description>Start by pulling the washing machine far enough forward to access the rear connections. Turn off both the hot and cold water supply valves connected to the washer. Disconnect the hot and cold water inlet hoses from the back of the washer. Finally, unplug the washer&apos;s power cord from the electrical outlet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IzC4BldiwIc</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9899-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hdrMAcmcdX0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Unplug Machine — Washing Machine Repair</video:title>
      <video:description>Before you begin disconnecting anything, you must prepare the area. First and foremost, locate the water supply shut-off valve, which is typically mounted on the wall behind the washing machine, and turn the lever to the &apos;Off&apos; position. This stops the flow of both hot and cold water to the hoses. Next, unplug the washing machine&apos;s power cord from the electrical outlet for safety. Finally, place a small bucket or container and have some old towels or rags ready to catch the residual water that will drain from the hoses when they are disconnected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hdrMAcmcdX0</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9900-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oDUmgjkTEUA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Washer Panels — Washing Machine Repair</video:title>
      <video:description>To gain better access to internal components and make reassembly easier, the top and front panels of the washing machine should be removed. Start by unscrewing the screws at the back of the washer that secure the top panel. Once removed, set the top panel aside. Next, carefully remove the dispenser drawer by unscrewing it. Then, locate and remove the screws holding the control panel and the lower front panel in place. As you remove these, be mindful of any electrical wiring or hoses that may need to be carefully detached. Keep all removed screws organized, noting which screws belong to which panel to simplify reassembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oDUmgjkTEUA</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9900-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c8VSZyt1PLE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Front Panel Clips — Washing Machine Repair</video:title>
      <video:description>To access the internal components, the front panel of the washing machine needs to be removed. Locate the retaining clips, typically at the top corners of the front panel. Use a painter&apos;s knife or a similar thin, sturdy tool to push into the gap between the top panel and the front panel. Apply pressure to release the clips on both sides, allowing the front panel to be pulled forward and removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c8VSZyt1PLE</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9900-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N_r8d93xPYw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Internal Components — Washing Machine Repair</video:title>
      <video:description>To access the motor, the top and back panels of the washing machine need to be removed. Begin by unscrewing the screws that secure the top panel. The presenter uses a power drill with a Torx head screwdriver bit for this. Once the screws are removed, the top panel can be lifted and set aside. Next, remove the back panel, which is typically held by a series of screws around its perimeter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N_r8d93xPYw</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9901-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/98qS1-toS08/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Main Control Board and Voltage to Drain Pump — Washing Machine Repair</video:title>
      <video:description>If the drain pump motor tests good for continuity and all hoses are clear, the issue may lie with the main control board. Remove the top panel of the washing machine to access the main control board, which is often located inside the cabinet. Many modern front-load washers have self-diagnostic cycles that can be activated to identify fault codes. Consult your washer&apos;s technical sheet (often found inside the cabinet or online) to enter the diagnostic mode. Use a multimeter set to AC voltage to check for power coming from the identified drain pump harness connector on the control board during the drain portion of the diagnostic cycle. If the control board sends the correct voltage to the pump, but the pump doesn&apos;t run, there may still be an issue with the pump (despite a continuity test). If there is no voltage coming from the control board to the pump, the control board is likely defective.</video:description>
      <video:player_loc>https://www.youtube.com/embed/98qS1-toS08</video:player_loc>
      <video:duration>172</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9901-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eL1YJCtKYrY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adhere to Diagnostic Principle — Washing Machine Repair</video:title>
      <video:description>The video concludes by reiterating the critical advice to always start with the simpler diagnostic checks for common components like the lid switch, motor, capacitor, or drain pump. The control board, being a more complex and expensive component, should always be considered the last component to replace, not the first, after exhausting other diagnostic possibilities.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eL1YJCtKYrY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9901-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tSCvlonAtpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Underside and Identify Faulty Pump — Washing Machine Repair</video:title>
      <video:description>With the top panel open, tilt the washing machine forward to expose its underside. Use a flashlight to inspect the motor, belt, and especially the water pump mechanism. Visually confirm that the motor spins freely, but the water pump&apos;s pulley is seized. Look for signs of leakage around the pump and debris (like lint or small objects) that might be jamming the impeller or causing wear. The video reveals a broken friction collar around the pump&apos;s shaft and visible scratch marks, indicating the problem lies with the water pump.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tSCvlonAtpQ</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9902-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cSrf-ixc5r8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace the Pressure Sensor — Washing Machine Repair</video:title>
      <video:description>To remove the old pressure sensor, rotate it to unclip it from its mounting on the side panel. Carefully detach the pressure hose from the old pressure sensor. Take the new pressure sensor and securely connect the pressure hose to it. Then, rotate the new pressure sensor into its mounting bracket on the side panel until it clicks firmly into place. Finally, connect the electrical wires back to the new pressure sensor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cSrf-ixc5r8</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9902-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tSCvlonAtpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Water Pump and Drive Belt — Washing Machine Repair</video:title>
      <video:description>Once the old water pump is removed, install the new water pump and a new belt (if replacing). The video shows a new water pump with a black base and clear housing, and a new drive belt. Attach the new pump using the existing screws and securely connect the hoses using hose clamps. Ensure all connections are tight to prevent leaks. Also, replace the drive belt if it shows signs of wear or damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tSCvlonAtpQ</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9902-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0awdycABELQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Pressure Sensor — Washing Machine Repair</video:title>
      <video:description>To replace the pressure sensor, first rotate the existing pressure sensor to unclip it and pull it away from the side panel where it&apos;s mounted. Then, carefully remove the pressure hose connected to the old sensor. Take the new pressure sensor and attach the pressure hose to it. Once the hose is connected, rotate the new pressure sensor into position, clipping it securely onto the side panel. Finally, connect the electrical wires back to the new pressure sensor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0awdycABELQ</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9903-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5SbLFsw10b0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Electrical and Secure Cabinet Panel Clips — Washing Machine Repair</video:title>
      <video:description>After the main cabinet panel is in place, re-engage the clips at the top rear of the panel. You should hear a distinct &apos;pop&apos; or &apos;click&apos; as each clip locks into position. Ensure both clips are firmly seated. Next, reconnect the main electrical wiring harness by pushing the connector firmly back into its socket until it clicks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5SbLFsw10b0</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9903-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VoIRMcjiJGA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall all Door Panel Screws — Washing Machine Repair</video:title>
      <video:description>With the panels reattached, use the cordless drill to reinstall all the screws previously removed in Step 3. Remember to place the longer screws back into the latch mechanism&apos;s position. Ensure all screws are tightened securely to hold the panels firmly together.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VoIRMcjiJGA</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9903-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iBY7iptZk2A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Wire Harness Cover — Washing Machine Repair</video:title>
      <video:description>Place the wire harness cover back over the connected wire harnesses. Secure it with the four Phillips screws, making sure to reattach the green ground wire under its designated screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iBY7iptZk2A</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9904-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/O83LlVs6DBU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore the water and power — Washing Machine Repair</video:title>
      <video:description>Place the drain hose back into its standpipe. Next, turn on both the hot and cold water supply valves to restore water flow to the washer. After turning on the water, carefully check for any slight leaks at the hose connections; if a leak is found, tighten the connection slightly more with your channel lock pliers. Finally, plug the washer&apos;s power cord back into the electrical outlet and return the washer to its original location against the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/O83LlVs6DBU</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9904-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WvAcKuCxdCM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Power and Water Supply — Washing Machine Repair</video:title>
      <video:description>With all components reassembled and secured, plug the LG washer&apos;s power cord back into the electrical outlet. Then, turn the hot and cold water supply valves back on. It&apos;s recommended to visually check the water inlet hose connections for any leaks once the water supply is restored.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WvAcKuCxdCM</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9904-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RpIq5QdcKLI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Power and Water — Washing Machine Repair</video:title>
      <video:description>Once all physical components are reassembled, plug your washing machine back into the wall outlet. Reconnect the hot and cold water hoses to their respective inlets on the back of the washer, ensuring they are hand-tightened. Finally, turn the hot and cold water supply valves back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RpIq5QdcKLI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9905-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dRj0Pds_3aM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initiate and Monitor Wash Cycle — Washing Machine Repair</video:title>
      <video:description>Close the washing machine lid and press the start button to begin the wash cycle. Observe the machine as it fills with water and goes through the washing phase. Listen for any unusual noises or issues that might indicate a problem. The video shows the machine successfully filling with water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dRj0Pds_3aM</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9905-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F2flhb2Zn4g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — Washing Machine Repair</video:title>
      <video:description>Plug the washing machine back into a power outlet. To test for leaks, set the washing machine to a &apos;fill cycle&apos; by rotating the dial. Pull out the knob to initiate the cycle and allow water to fill the tub. Carefully check all hose connections, particularly the water inlet valve, and the floor around the machine for any signs of water leakage. Once the tub is about halfway full, push the knob in to stop the fill cycle. Next, rotate the dial to the &apos;spin cycle&apos; and pull the knob out to initiate the draining process. Again, thoroughly check for any leaks, especially around the pump and drain hose connections, to ensure the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F2flhb2Zn4g</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9905-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uiuLH_l5zAM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Verify Repair — Washing Machine Repair</video:title>
      <video:description>Plug the washing machine back into the electrical outlet. Run test cycles at different load sizes (small, medium, and extra large) to confirm the fix. For each cycle, the washer should fill to the correct water level and stop without overflowing, then agitate and drain properly. The presenter demonstrates successfully running cycles on small, medium, and extra large loads, showing the water level stopping appropriately and the machine agitating as expected, confirming the repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uiuLH_l5zAM</video:player_loc>
      <video:duration>227</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9891-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4jS0xOsJq0k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Mold and Prepare Work Area — Mold Remediation</video:title>
      <video:description>Begin by assessing all mold-affected areas on ceilings, walls, window sills, and any other surfaces. This includes identifying the extent of the mold growth and any peeling paint. Before starting any work, ensure you are wearing appropriate personal protective equipment (PPE), including a full hazmat suit, gloves, goggles, and a respirator mask, to prevent exposure to mold spores and chemicals. Prepare the work area by covering furniture and flooring with plastic sheeting to protect them from spills and falling debris. Remove any items, such as plants, from the immediate vicinity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4jS0xOsJq0k</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9891-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rSSgz5yykmA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect for Visible Signs of Damage — Mold Remediation</video:title>
      <video:description>Begin by visually inspecting the areas where you suspect a problem. In this case, mold is visible on the wall behind a vanity and has grown more extensively inside the vanity cabinet, indicating a persistent moisture issue in that location.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rSSgz5yykmA</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9891-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sGIa8EBryL4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Detect and Assess Sheathing Staining — Mold Remediation</video:title>
      <video:description>After the initial general assessment, systematically examine all areas of the roof sheathing, paying particular attention to different orientations, such as the north side, which often receives less direct sunlight and can be more prone to condensation. The video demonstrates a critical discovery where the inspector transitions from a clean area to revealing extensive black staining covering a significant portion of the roof sheathing, specifically on what is identified as the &apos;north side.&apos; This black staining is a strong indicator of mold growth, suggesting a significant and persistent moisture issue, likely due to inadequate ventilation or high humidity levels within the attic. It is crucial to document the exact location, extent, and appearance of such staining.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sGIa8EBryL4</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9892-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F5RXnHfsRfg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation for Demolition and Mold Containment — Mold Remediation</video:title>
      <video:description>Before removing the damaged flooring, the crew prepares the work area to contain mold spores and debris. They seal off doorways and other areas of the house with 6-mil poly sheeting and blue painter&apos;s tape to prevent the spread of mold and dust. An air scrubber is set up to maintain air quality during the demolition process, especially important given the presence of mold under the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F5RXnHfsRfg</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9892-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S9VUBsoMTjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Establish Containment Zone — Mold Remediation</video:title>
      <video:description>Based on the inspection results, a containment zone is created. This involves installing 6-mil plastic sheeting to seal off the affected area from the rest of the building, securing it with tape around doorways and window frames. All air conditioning vents within the containment zone are also sealed to prevent the spread of mold spores through the HVAC system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S9VUBsoMTjU</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9892-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LqQi5rhyfMs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear and Contain the Work Area — Mold Remediation</video:title>
      <video:description>Clear the immediate work area of any items or clutter that could be contaminated or hinder the mold removal process. Once cleared, use 3-mil plastic drop cloths, duct tape, and a staple gun to seal off the affected zone from the rest of the building. This creates a containment barrier, preventing mold spores from spreading to other areas. Ensure all openings are sealed for an airtight environment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LqQi5rhyfMs</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9893-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tq66emGk59A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Physically Remove Existing Mold — Mold Remediation</video:title>
      <video:description>Once moisture issues are controlled, the next crucial step is the physical removal of existing mold. The speaker strongly criticizes the practice of painting over mold, even with a &apos;mold and mildew resistant&apos; primer like Zinsser, because it merely conceals the problem and does not kill the mold or prevent its return. Mold must be physically scrubbed, scraped, or soda-blasted from affected surfaces. For surfaces like wood, soda blasting is a common and effective method for removing visible mold and its root structure without damaging the substrate. The goal is to eliminate all visible mold growth before any antimicrobial treatments are applied.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tq66emGk59A</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9893-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2-BnGhQeaNU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Off Mold and Mildew — Mold Remediation</video:title>
      <video:description>Before applying any paint or primer, the mold or mildew must be thoroughly cleaned off the surface. You can achieve this using a bleach solution (typically a mix of one part bleach to three parts water) or a commercial cleaner specifically designed for mold and mildew removal. Apply the solution using a scrub brush or sponge, scrub the affected area, and rinse thoroughly. Ensure the surface is completely dry before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2-BnGhQeaNU</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9893-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4jS0xOsJq0k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Bleach-Based Mold Spray &amp; Scrub — Mold Remediation</video:title>
      <video:description>On Day 3, apply a bleach-based mold spray, such as HG Mould Spray, to any remaining stained areas on walls, ceilings, and particularly in grout lines or caulk. Spray the product directly onto the stains, allowing it to work according to the product&apos;s instructions (typically a few minutes). For stubborn areas like caulk, use an electric scrubbing brush or a regular scrubbing brush with CIF cleaner to agitate and remove the mold. Rinse the area thoroughly with water if possible, ensuring no residue remains.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4jS0xOsJq0k</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9894-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HgtjqEAV58Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Up Drying Equipment — Mold Remediation</video:title>
      <video:description>After visible standing water has been extracted, strategically place industrial air movers (fans) and a large dehumidifier in the affected areas. The fans are used to circulate air and accelerate evaporation from the damp carpets, while the dehumidifier extracts moisture from the air, preventing it from settling back into materials and inhibiting mold growth. Connect the dehumidifier&apos;s drain hose to a suitable drainage point, such as a bathroom sink, to remove the collected water. The dehumidifier shown is a &apos;Phoenix 200 HT&apos;. This equipment will run for several days to achieve complete structural drying.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HgtjqEAV58Q</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9894-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S9VUBsoMTjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Out Wall Cavity and Framing — Mold Remediation</video:title>
      <video:description>To prevent future mold growth, the wall cavity and cleaned wooden framing must be completely dry. Air movers (fans) are placed to blow air directly onto these areas for approximately 24-48 hours. After drying, a moisture meter is used to test the wood&apos;s moisture content. The wood should register as dry before any new building materials are installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S9VUBsoMTjU</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9894-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N4tQ1cEa2oE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Out All Affected Areas — Mold Remediation</video:title>
      <video:description>To prevent mold growth and further structural damage, all wet materials must be dried completely. Place high-velocity air movers (fans) and a dehumidifier in both the bathroom and the room below. Direct airflow across the wet subfloor, flooring, and into the exposed ceiling cavity. This process can take several days.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N4tQ1cEa2oE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9895-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S9VUBsoMTjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Contaminated Materials — Mold Remediation</video:title>
      <video:description>Begin by removing all items from the area that are affected by mold. This includes rolling up and removing the carpet and its padding, pulling up tack strips, detaching baseboards, and cutting out moldy drywall. Insulation inside the wall cavity that has been wet or molded is also removed. Care should be taken to minimize disturbance of mold spores during removal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S9VUBsoMTjU</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9895-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S9VUBsoMTjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Bag and Seal Contaminated Debris — Mold Remediation</video:title>
      <video:description>As materials are removed, they are immediately placed into thick, heavy-duty disposal bags (e.g., 6-mil contractor bags) within the containment area. The bags are then sealed using the &apos;gooseneck&apos; method: twist the top of the bag tightly, bend it over on itself to create a loop, and secure it with tape or zip ties. This method provides an airtight seal, preventing mold spores from escaping during transport and disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S9VUBsoMTjU</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9895-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LqQi5rhyfMs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Bag and Dispose of Contaminated Debris — Mold Remediation</video:title>
      <video:description>Spray all removed moldy debris (drywall pieces, insulation) with hydrogen peroxide before placing it into heavy-duty black trash bags. Employ the &apos;J-seal&apos; method for securing the bags: twist the top, fold it over into a &apos;J&apos; shape, and seal it tightly with tape. This method helps prevent any spores from escaping. Carefully bag up all remaining debris on the plastic sheeting and secure the sheeting itself for disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LqQi5rhyfMs</video:player_loc>
      <video:duration>137</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9896-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SNRJR89HNP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Natural Odor Neutralizers — Mold Remediation</video:title>
      <video:description>Once the source of the odor has been addressed, use natural neutralizers to absorb any lingering smells. Several options are presented: baking soda, white vinegar, raw oats, activated charcoal, and coffee grounds. These can be strategically placed throughout the home. For example, bowls of vinegar can be placed in different rooms to absorb odors. An open box of baking soda can be placed in the refrigerator to absorb smells. Socks can be filled with baking soda, raw oats, or coffee grounds, tied off, and placed in dresser drawers, stale closets, or other small spaces needing deodorizing. For carpets, baking soda can be liberally sprinkled over the entire surface, left to sit for several hours, and then vacuumed up to deodorize the carpet. Baking soda can also be sprinkled in the bottom of trash cans and inside shoes. These methods are highlighted as chemical-free and non-toxic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SNRJR89HNP8</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9896-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rTxTCQz6D20/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Mold Control and Deodorizer (Optional) — Mold Remediation</video:title>
      <video:description>To eliminate any remaining mold spores and prevent future mold growth, apply a specialized mold control product like Concrobium Mold Control. Additionally, to address any lingering bad smells, use a multi-purpose cleaner and deodorizer, such as Rid&apos;z Odor Super Concentrated Multi-Purpose Cleaner &amp; Deodorizer Lemon Drop. Follow the product instructions for application and drying times.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rTxTCQz6D20</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9896-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4jS0xOsJq0k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wipe Down Vinegar and Dry — Mold Remediation</video:title>
      <video:description>After the white vinegar has had sufficient dwell time, begin wiping the treated surfaces using cheap sponges or cloths. Work in short, circular motions to effectively lift and remove the mold along with the vinegar solution. Dispose of used sponges/cloths appropriately as they will contain mold spores. After wiping, leave the entire area to dry out completely for at least 24 hours. This drying period is critical before applying the next product to prevent dangerous chemical reactions and ensure maximum effectiveness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4jS0xOsJq0k</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9897-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xB6nU3GV1xI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Use Dehumidifiers — Mold Remediation</video:title>
      <video:description>For areas with persistently high humidity, such as basements or garages, utilize a dehumidifier. Dehumidifiers extract excess moisture from the air, reducing humidity levels. The presenter shows two different models: an older one that requires emptying a water bucket and a newer model with a built-in pump that automatically drains the collected water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xB6nU3GV1xI</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9897-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CsNWP_D7V5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prevent Mold from Happening and Spreading — Mold Remediation</video:title>
      <video:description>To prevent future mold growth, several proactive measures can be taken. Always replace your air filters regularly, ideally every two months, or use specialized filters that prevent mold growth, even if they are more expensive. Consider installing a UV light system in your AC unit, which actively prevents mold from spreading and improves airflow. If you live in a high-humidity area, using a humidifier can help remove excess moisture, a primary cause of mold. Installing a drainage system can also prevent moisture collection around the unit. Finally, consider hiring a professional to fully check your air conditioner at least once a year to ensure optimal performance and cleanliness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CsNWP_D7V5s</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9897-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5iaVH6iqwpM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install a Dehumidifier — Mold Remediation</video:title>
      <video:description>To maintain a consistently dry environment in your basement and prevent the recurrence of mold and mildew, it is highly recommended to purchase and install a dehumidifier. This device actively removes excess moisture from the air, which is a primary catalyst for mold growth, especially in older homes with some water intrusion. Although not detailed in the video, the presenter also mentions installing automatic light sensors in the basement. This small enhancement can significantly improve the basement&apos;s brightness and overall feel, complementing the clean, white walls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5iaVH6iqwpM</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9884-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qvBiQU6F1qw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Assessment of Battery Symptoms — Car Battery Testing</video:title>
      <video:description>The video highlights a common issue: a car with flickering dash lights and a no-start condition, even when the battery shows 12.5 volts. The key takeaway is that having sufficient voltage (12.5V) does not automatically mean the battery has enough cranking amperage to start the vehicle. Initial symptoms of a weak battery or charging system issue can include dimming or flickering lights on the dashboard or headlights, or a slow cranking engine that fails to start.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qvBiQU6F1qw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9884-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Km6MNRYeEEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Common Battery Issues and Misdiagnoses — Car Battery Testing</video:title>
      <video:description>The video begins with an introduction to common car starting problems and potential misdiagnoses. The presenter discusses symptoms like a clicking sound or slow cranking, often mistakenly attributed to a bad starter when it could be a weak battery not supplying enough amps. He also highlights cases where power is present but cuts out with a &apos;pop&apos; or &apos;tick&apos; sound upon turning the key, which might indicate corroded or loose battery terminal connectors. He emphasizes that if a good battery can crank a car for 30 seconds without issues, a weak battery is the likely culprit for slow cranking. He further explains that if a car starts after a jump but dies when accessories are used, it points to a problem with the alternator, especially if exacerbated by a weak battery putting extra strain on the alternator. He explicitly states that parasitic draw testing will be covered in a follow-up video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Km6MNRYeEEY</video:player_loc>
      <video:duration>154</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9884-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KqK35eFnWK8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Evaluate Old Battery Condition — Car Battery Testing</video:title>
      <video:description>The final battery problem is simply an &apos;Old Battery&apos;. If a car consistently fails to start, it&apos;s possible the battery is old and worn out and can no longer hold a charge. An easy way to check an old battery is with a digital multimeter. After the car has been sitting overnight, check the battery&apos;s voltage. If the voltage is 11.8 DC volts or less, the battery&apos;s life is over and it needs to be replaced. The speaker recommends replacing the battery when its voltage reaches 12.2 DC volts or less to prevent premature wear on the alternator and starter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KqK35eFnWK8</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9885-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K-_kT8LTtDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Negative Battery Terminal — Car Battery Testing</video:title>
      <video:description>First, carefully remove the red positive terminal cover. Using a 10mm socket and ratchet, loosen the nut on the negative (-) battery terminal (usually on the right side). Once loosened, wiggle the terminal off the battery post and move it away from the battery to prevent accidental contact. It&apos;s crucial to disconnect the negative terminal first to avoid short circuits or sparks if your tool accidentally touches a metal part of the car body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K-_kT8LTtDg</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9885-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WdX8dmLNwOs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Battery Terminals — Car Battery Testing</video:title>
      <video:description>Begin by safely disconnecting the battery terminals. Use a 10mm socket or wrench to loosen the nut on the negative terminal first. Once loose, carefully remove the terminal from the battery post and move it away to prevent accidental contact with other metal components. Repeat the process for the positive terminal. Be aware that disconnecting the battery will reset some vehicle settings like radio stations and the clock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WdX8dmLNwOs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9885-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lqd-A6bteqw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Negative Battery Cable — Car Battery Testing</video:title>
      <video:description>With the car off, locate the negative battery terminal (usually marked with a &apos;-&apos; sign and often has a black cable). Use the appropriate wrench to loosen the nut on the negative terminal clamp. Once loose, carefully remove the negative cable from the battery post. Ensure the cable is moved away from the battery and any metal components of the car to prevent accidental grounding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lqd-A6bteqw</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9886-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qvBiQU6F1qw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Clean Battery Terminals — Car Battery Testing</video:title>
      <video:description>Before any electrical testing, it&apos;s crucial to ensure all battery connections are clean and secure. Begin by disconnecting both the positive and negative battery terminals. Visually inspect the terminals and battery posts for any signs of corrosion (a white or greenish powdery substance). Use a battery terminal cleaning brush (a small, inexpensive tool available at auto parts stores) to thoroughly clean both the battery posts and the inside surfaces of the cable clamps. Once cleaned, reattach the cables, ensuring they are tightened securely to prevent any loose connections, which can impede current flow and cause various electrical problems.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qvBiQU6F1qw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9886-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X3ybcNRmpaw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Battery Terminals with Wire Brush — Car Battery Testing</video:title>
      <video:description>After identifying corrosion on the battery terminals, it&apos;s crucial to clean them thoroughly. First, disconnect the battery cables, starting with the negative terminal, followed by the positive. Use a battery terminal wire brush to remove all white or blue-green corrosive buildup from both the battery posts and the inside of the cable clamps. For stubborn corrosion, a mixture of baking soda and water can be applied to neutralize the acid, then scrubbed clean with the wire brush. Rinse with clean water and dry completely before reconnecting the terminals. This ensures optimal electrical contact for reliable starting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X3ybcNRmpaw</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9886-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/T1BmlR1EQXI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Tighten Terminals — Car Battery Testing</video:title>
      <video:description>Ensure a clean and tight connection for the battery terminals. Corrosion on the inside of the terminals or battery posts can limit or stop the flow of current, leading to starting problems even with a good battery. Use sandpaper or a wire brush to thoroughly clean any corrosion from both the inside of the terminal clamps and the battery posts until you see the bare copper or metal. After cleaning, tighten the terminals securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/T1BmlR1EQXI</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9887-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Km6MNRYeEEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Static Battery Voltage — Car Battery Testing</video:title>
      <video:description>Connect the multimeter leads to the car battery. Touch the black lead (negative probe) to the negative battery terminal and the red lead (positive probe) to the positive battery terminal. The video uses small clamps to hold the leads in place, but manual contact is sufficient. Observe the voltage reading on the multimeter&apos;s display. A healthy car battery should read between 12.4 to 12.8 volts. If the reading is higher, such as above 13.0 volts, it might be a &apos;surface charge.&apos; To remove a surface charge, turn on the car&apos;s headlights for approximately 15 seconds, then retest the voltage. The presenter notes a reading of 12.71 volts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Km6MNRYeEEY</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9887-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3wNVit09fJc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Battery Voltage — Car Battery Testing</video:title>
      <video:description>With the multimeter properly set up, take the two probes of the test leads. Carefully place the red probe onto the red (positive) terminal of the battery and the black probe onto the black (negative) terminal of the battery. Once connected, the voltage reading will instantly display on the multimeter&apos;s screen. The video demonstrates a reading of 13.7 volts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3wNVit09fJc</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9887-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TB5BJYd0AHw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Multimeter to Battery and Read Voltage — Car Battery Testing</video:title>
      <video:description>With the multimeter properly set up, connect the red test lead to the positive terminal (+) of the TATA Batteries motorcycle battery and the black test lead to the negative terminal (-) of the battery. Ensure a good connection is made. The voltage reading will then appear on the multimeter&apos;s digital display. In the video, the reading stabilizes around 11.32V to 11.33V. For a 12V lead-acid battery, a reading of 11.3V typically indicates a significantly discharged battery (around 20-30% state of charge or less), suggesting it needs charging or further inspection if it doesn&apos;t hold a charge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TB5BJYd0AHw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9888-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WCKSoxUfWAo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Battery Load Test — Car Battery Testing</video:title>
      <video:description>The presenter clarifies that car batteries are not designed to be completely drained and recharged, as this shortens their lifespan. He then demonstrates using a load tester to check the battery&apos;s condition under stress. He explains that a simple voltmeter only shows surface voltage and doesn&apos;t indicate how the battery performs under load (like when the starter motor is running). He connects the load tester to the battery terminals. The load tester simulates the heavy drain of a starter motor. The load tester shows a reading of 10.5 volts in the &apos;good&apos; range, confirming the battery itself is okay despite the &apos;battery symptoms&apos; caused by the failing alternator. He advises that if a user doesn&apos;t have a load tester, many auto parts stores and shops offer free battery and alternator testing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WCKSoxUfWAo</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9888-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bcMtj33jhec/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Load Test on a Good Battery — Car Battery Testing</video:title>
      <video:description>The presenter demonstrates testing a 1000 CCA Interstate Marine Cranking battery. First, connect the red clamp of the load tester to the positive terminal of the battery and the black clamp to the negative terminal. Observe the initial voltage reading on the dial. For a healthy battery, it should read around 12.5 volts or higher. Then, press the load button on the tester for no more than 8-10 seconds. During the load, the needle should drop, but remain within the &apos;OK&apos; green section corresponding to the battery&apos;s CCA (in this case, the 1000 CCA range). After releasing the button, the needle should quickly regenerate back to its original voltage. A successful test indicates a good battery.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bcMtj33jhec</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9888-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bcMtj33jhec/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Load Test on a Bad Battery — Car Battery Testing</video:title>
      <video:description>Next, the presenter demonstrates the load test on an old, failing Interstate Marine/RV Deep Cycle battery with a 690 CCA rating. Even though this battery had been charged overnight, its initial voltage reading is only about 5-5.5 volts, falling directly into the &apos;Bad&apos; red zone for a 12-volt battery. Upon pressing the load button, the needle immediately drops to near zero, indicating a complete failure to hold a charge under load. This confirms the battery is bad and needs to be replaced. The presenter emphasizes that a high initial voltage doesn&apos;t guarantee a good battery; the load test is crucial for revealing its true capacity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bcMtj33jhec</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9889-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Km6MNRYeEEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Interpret Test Results and Plan Next Steps — Car Battery Testing</video:title>
      <video:description>Based on the static voltage and load test readings, interpret the battery&apos;s condition. If the cranking voltage drops below 9.5 volts, the battery is likely dead and needs replacement, as it&apos;s beyond charging. If the cranking voltage is around 11 volts, there&apos;s a chance it can be recharged. In this scenario, check for corrosion on battery terminals and connectors; clean them thoroughly if present. If the battery still struggles after cleaning/replacing terminals and recharging, or if a brand new battery also drains overnight, it suggests a parasitic draw (an electrical component draining power when the car is off). The presenter states that a follow-up video will cover how to find a parasitic draw and another video will cover alternator testing. For batteries that might be rechargeable, local auto parts stores often provide free battery load testing and charging services.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Km6MNRYeEEY</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9889-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K1sBsrHNEKw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Interpret Results and Determine Next Steps — Car Battery Testing</video:title>
      <video:description>Based on the DMM readings from the load test and crank test, determine the likely faulty component. If the voltage drops severely only under electrical load (engine running) but holds up during cranking, the alternator is the prime suspect. If the voltage drops significantly during cranking, the battery is likely at fault. The video emphasizes that even &apos;new&apos; parts can be defective, especially remanufactured alternators, which often have a high failure rate. For definitive load test results, a specialized battery and alternator load tester (briefly shown in the video at 4:44) is recommended, as it applies a controlled, high current draw. If replacing the alternator, prioritize a new unit over a remanufactured one due to reliability concerns.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K1sBsrHNEKw</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9889-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gq0iey9VC94/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Second Load Test (Simulated Short Journey) — Car Battery Testing</video:title>
      <video:description>To get a more comprehensive understanding of the battery&apos;s condition, especially if the first load test was borderline or passed easily, perform a second load test. This simulates the battery being used for a short journey and then needing to start the car again. First, note the battery&apos;s resting voltage before the second test (it might have dropped slightly after the first start). Then, attempt to start the engine again and observe the minimum voltage during cranking. A good battery should still manage to start the car without the voltage dropping excessively low (below 9.6V). The video shows the battery struggling on the second start, with the voltage dropping to 5.73V, significantly below the target, indicating a bad battery despite starting easily the first time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gq0iey9VC94</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9890-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/w4oLd6gLrP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Battery Terminals — Car Battery Testing</video:title>
      <video:description>First, take the positive (+) terminal wire and place it back onto the positive battery post. Ensure it slides down completely onto the post (seen at 4:10.000). Use your 10mm tool to tighten the terminal clamp nut firmly (seen at 4:17.000) so that the connection is secure and the wire cannot be easily pulled off. Replace the red plastic protective cap over the positive terminal (seen at 4:24.000). Next, take the negative (-) terminal wire and place it onto the negative battery post. You might see some small sparks when connecting the negative terminal; this is normal (seen at 4:35.000). Push the wire down onto the post and then tighten the terminal clamp nut with your 10mm tool until it is secure (seen at 4:50.000).</video:description>
      <video:player_loc>https://www.youtube.com/embed/w4oLd6gLrP8</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9890-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WdX8dmLNwOs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Battery Terminals — Car Battery Testing</video:title>
      <video:description>Reconnect the battery terminals. Start by attaching the positive terminal to the positive battery post first, then follow with the negative terminal to the negative battery post. Use the 10mm socket or wrench to tighten the nuts on both terminals, ensuring they are snug and make good electrical contact. A loose connection can lead to starting issues or charging problems.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WdX8dmLNwOs</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9890-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3F5VF3LrDXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Battery Terminals — Car Battery Testing</video:title>
      <video:description>Now, reconnect the battery cables in the reverse order of removal. First, reconnect the positive battery terminal. Place the positive terminal cable onto the positive battery post and tighten the nut with the 10mm deep socket and ratchet. Replace the red protective cap. Next, place the negative terminal cable onto the negative battery post and tighten its nut with the 10mm deep socket and ratchet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3F5VF3LrDXU</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9879-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sC9Kl79BsNQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnecting the Dryer Vent — Dryer Vent Cleaning</video:title>
      <video:description>Carefully move the dryer away from the wall to gain access to the back of the appliance and the wall vent. Locate the flexible metal duct connecting the dryer to the wall vent. Use a screwdriver to loosen the clamp holding this flexible duct to the wall vent connection, then carefully pull the duct away to disconnect it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sC9Kl79BsNQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9879-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/G30EMOn1Cq8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Dryer and Disconnect Duct — Dryer Vent Cleaning</video:title>
      <video:description>Begin by ensuring the dryer is safe to work on. Unplug the dryer from its electrical outlet. If you have a gas dryer, it is crucial to locate the gas supply valve and turn it to the &apos;off&apos; position. This prevents any gas from leaking or accidentally igniting while you work. Once power and gas are secured, carefully pull the dryer away from the wall to gain access to the back where the exhaust duct is connected. Gently disconnect the exhaust duct from the dryer&apos;s port.</video:description>
      <video:player_loc>https://www.youtube.com/embed/G30EMOn1Cq8</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9879-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tbEwAXWoINQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Dryer Vent Hose — Dryer Vent Cleaning</video:title>
      <video:description>Begin by pulling your dryer away from the wall to access the back connections. Once the dryer is pulled out, carefully remove the old, dirty, and likely clogged dryer vent hose from both the back of the dryer and the exhaust tube in the wall. The video shows the old hose is heavily caked with lint, resembling a fire hazard and an impediment to proper exhaust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tbEwAXWoINQ</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9880-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YwH89LtnnfM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Dryer Ductwork — Dryer Vent Cleaning</video:title>
      <video:description>Utilize a specialized duct cleaning brush attached to an extension rod, which can be powered by a standard drill. Insert the spinning brush into the dryer duct opening from the exterior and thoroughly clean the interior of the ductwork. This process will dislodge accumulated lint and debris. Afterwards, use a shop-vac to suction out any remaining loose lint from the duct and the surrounding area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YwH89LtnnfM</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9880-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sC9Kl79BsNQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Main Dryer Vent Duct — Dryer Vent Cleaning</video:title>
      <video:description>Utilize a dryer vent cleaning kit, which typically includes a flexible brush rod and an adapter for a power drill. Attach the flexible brush rod securely to your power drill. Carefully insert the brush end of the rod into the wall vent opening. Slowly push and pull the spinning brush through the entire length of the vent duct, allowing the brush to dislodge all built-up lint. This can be done from either the inside or the outside vent opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sC9Kl79BsNQ</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9880-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LOFHxs9-I9k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean External Dryer Vent Duct — Dryer Vent Cleaning</video:title>
      <video:description>Next, address the external dryer vent duct. Obtain a dryer vent attachment kit designed for use with a drill. This kit typically includes flexible rods that connect together and a brush head. Attach the brush head to the end of one rod, then connect it to your drill. Insert the brush into the external dryer vent opening and, while the drill rotates, push the rods further into the duct. This action will effectively scrub the internal walls of the vent, dislodging lint. The video shows an ideal scenario where lint is pushed out, but also illustrates a potential issue: a vent sealed with silicone. If your vent is sealed, you may need to carefully remove the sealant to access the duct, or, as a last resort, use a camera (like a phone) to visually inspect the duct&apos;s cleanliness if full access is not possible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LOFHxs9-I9k</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9881-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sC9Kl79BsNQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Dryer and Wall Vent Openings — Dryer Vent Cleaning</video:title>
      <video:description>With the flexible duct disconnected, use a stiff brush to dislodge any lint and dust accumulated around the dryer&apos;s exhaust port and inside the wall vent opening. Immediately follow up by using a vacuum cleaner with a hose attachment to suction out all the loosened debris from both the dryer&apos;s exhaust and the exposed wall vent opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sC9Kl79BsNQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9881-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hd2xyg_tESY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Dryer Internal Vent — Dryer Vent Cleaning</video:title>
      <video:description>Once the dryer hose is clean, it&apos;s time to clean the dryer&apos;s exhaust port. First, use a brush (the video shows a smaller tapered brush) to manually dislodge any lint visible inside the dryer&apos;s exhaust opening. Then, connect the blue conical adapter to a shop vacuum hose and insert it into the dryer&apos;s exhaust port to vacuum out any remaining loose lint. This ensures the entire system is free of obstructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hd2xyg_tESY</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9881-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QOjPOKvP1L4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Dryer Vent Hose and Ports — Dryer Vent Cleaning</video:title>
      <video:description>Disconnect the flexible dryer vent hose from both the back of the dryer and the wall connection. Use a dryer lint brush to clean out any lint accumulated inside the disconnected hose. Additionally, brush and vacuum the exhaust port on the back of the dryer and the wall vent opening. Visually inspect the inside of the wall vent for any blockages or excessive lint buildup. The video shows the wall vent being surprisingly clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QOjPOKvP1L4</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9882-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tbEwAXWoINQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect New Hose and Position Dryer — Dryer Vent Cleaning</video:title>
      <video:description>Take the smaller end of the new quick-connect dryer vent hose and firmly push it onto the exhaust port at the back of the dryer. The rubber gasket should create a tight seal. Next, take the other end of the hose (the &apos;exhaust&apos; side) and firmly push it into the wall exhaust tube. Ensure both connections are secure. Once both ends are connected, carefully push the dryer back into its original position, making sure not to crimp or disconnect the hose. The presenter notes that with this quick-connect type, his dryer couldn&apos;t go quite as close to the wall as before.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tbEwAXWoINQ</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9882-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hd2xyg_tESY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Dryer Vent System — Dryer Vent Cleaning</video:title>
      <video:description>After all cleaning is complete, reattach the cleaned dryer hose to the dryer&apos;s exhaust port. Use any clamps or fasteners originally present to secure the connection. Next, connect the other end of the dryer hose to the wall vent opening, again securing it with appropriate clamps. Finally, carefully push the dryer back into its original position, ensuring the hose is not kinked or crushed. Plug the dryer back into the electrical outlet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hd2xyg_tESY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9882-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QOjPOKvP1L4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test Dryer — Dryer Vent Cleaning</video:title>
      <video:description>After cleaning, securely reconnect the flexible dryer vent hose to both the dryer&apos;s exhaust port and the wall vent. Ensure all connections are tight to prevent air and lint leaks. Plug the dryer back into the electrical outlet and turn the gas supply back on. Carefully push the dryer back into its original position against the wall. Finally, perform a test run of the dryer to ensure it&apos;s functioning correctly and efficiently.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QOjPOKvP1L4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9883-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sC9Kl79BsNQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up and Reconnect Dryer — Dryer Vent Cleaning</video:title>
      <video:description>After cleaning, vacuum up any lint, dust, or debris that may have fallen onto the floor. Reattach the flexible duct to the wall vent connection, ensuring it is securely fastened with the clamp and tightened using the screwdriver. Push the dryer back into its original position against the wall. Finally, plug the dryer back into the electrical outlet and, if applicable, turn the gas supply valve back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sC9Kl79BsNQ</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9883-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QOjPOKvP1L4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test Dryer — Dryer Vent Cleaning</video:title>
      <video:description>After cleaning, securely reconnect the flexible dryer vent hose to both the dryer&apos;s exhaust port and the wall vent. Ensure all connections are tight to prevent air and lint leaks. Plug the dryer back into the electrical outlet and turn the gas supply back on. Carefully push the dryer back into its original position against the wall. Finally, perform a test run of the dryer to ensure it&apos;s functioning correctly and efficiently.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QOjPOKvP1L4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9883-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lJv1Eu77cHM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Dryer and Verify Airflow Improvement — Dryer Vent Cleaning</video:title>
      <video:description>After all cleaning is complete, connect the flexible dryer vent hose back to the dryer&apos;s exhaust port and secure it tightly with the hose clamp. Plug the dryer back into the power source. As a final check, use an anemometer to measure the improved airflow from both the dryer&apos;s exhaust port and the external vent. The presenter shows a significant increase in airflow (from about 7 m/s to 11 m/s) after cleaning, confirming the effectiveness of the process in improving dryer performance and safety. He displays the collected lint, emphasizing the amount removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lJv1Eu77cHM</video:player_loc>
      <video:duration>148</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9873-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WxxOtXTiDUY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Second Cleaning Cycle (Vinegar) — Washing Machine Cleaning</video:title>
      <video:description>Once the initial baking soda cycle is complete, the next step is to add white vinegar. Pour two cups of plain white vinegar directly into the washing machine drum. For an optional pleasant scent, you can add 5 to 10 drops of lavender essential oil to the vinegar mixture. Close the washing machine door, then run another cycle on the longest and hottest setting. This vinegar-based mixture will help to disinfect the washer and remove any remaining film or odor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WxxOtXTiDUY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9873-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WxxOtXTiDUY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>First Cleaning Cycle (Baking Soda) — Washing Machine Cleaning</video:title>
      <video:description>Begin the deep cleaning process by adding two cups (or one full box) of plain baking soda directly into the washing machine drum. This method is effective for both front-loading HE (High-Efficiency) washers and top-loading machines. After adding the baking soda, close the washing machine door. Select the hottest and longest wash cycle available on your machine and start the cycle. The baking soda will act as a mild scrubber to remove buildup and neutralize any accumulated odors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WxxOtXTiDUY</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9873-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A4guMCZ_lXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run Hot Wash Cycle (Front-Loader) — Washing Machine Cleaning</video:title>
      <video:description>Set your front-loading washing machine to the hottest temperature setting and run a normal washing cycle. It&apos;s important to allow the cleaning agents (vinegar and baking soda) plenty of time to work inside the drum. A wash cycle of at least one hour is ideal to ensure the heat combined with the baking soda and vinegar effectively kills any smelly mildew or mold within the machine.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A4guMCZ_lXw</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9874-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kW3N9jGrG9I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Detergent Dispenser Drawer — Washing Machine Cleaning</video:title>
      <video:description>Pull out the detergent dispenser drawer from the washing machine. Using a damp microfiber cloth saturated with the vinegar/water/Dawn solution, thoroughly clean all compartments of the dispenser, including the main detergent section, fabric softener section, and any pre-wash compartments. Use the old toothbrush to scrub away any hardened detergent residue or mold in tight corners. Once clean, wipe dry and reinsert the drawer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kW3N9jGrG9I</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9874-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wFubFK5vdOc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Dispenser Tray — Washing Machine Cleaning</video:title>
      <video:description>The dispenser tray, where you add detergent, bleach, and fabric softener, is another common area for residue buildup. After each load, open the dispenser tray. Most trays can be easily removed by pressing a release tab, allowing for more thorough cleaning. Once removed, spray your maintenance cleaning solution into all compartments of the tray. Use your old toothbrush to scrub away any soap scum, residue, or gunk. After scrubbing, thoroughly rinse the tray under running water until it&apos;s clean. Dry it completely with a microfiber towel to prevent moisture accumulation. This ensures the tray is free of any residue. Once clean and dry, reinsert the tray into its slot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wFubFK5vdOc</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9874-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jQHQun0nG5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove/Clean Dispenser Trays — Washing Machine Cleaning</video:title>
      <video:description>Every 2-3 months, or as needed, clean the detergent and fabric softener dispenser trays. Pull out the trays as far as they can go. Locate the small tab at the back of each tray (one for detergent, one for softener); press down on these tabs to fully release and remove the trays. Clean the trays thoroughly using a brush, warm water, and any preferred cleaning product to remove residue buildup. Also, clean the empty compartments inside the machine with a damp rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jQHQun0nG5w</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9875-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kW3N9jGrG9I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply and Scrub Baking Soda Paste on Seal — Washing Machine Cleaning</video:title>
      <video:description>Using a spoon or gloved hand, apply the prepared baking soda paste generously onto the rubber seal around the opening of the washing machine. Spread the paste evenly, ensuring it coats all the dirty and grimy areas, especially underneath the folds of the seal. Allow the paste to sit and work its magic for at least 10 minutes to help break down the mold and residue. After 10 minutes, use an old toothbrush to thoroughly scrub the paste into the seal, focusing on any stubborn black spots or grime.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kW3N9jGrG9I</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9875-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CGVF42gee8I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Washing Machine Door and Rubber Seal — Washing Machine Cleaning</video:title>
      <video:description>Using the same spray bottle with the water and white vinegar mixture, spray the interior of the washing machine&apos;s main door, focusing on the glass and the rubber gasket (seal) that lines the opening. Wipe down the door&apos;s glass and frame with a clean microfiber cloth. Next, pay very close attention to the rubber seal. Gently pull back the folds of the rubber seal and thoroughly wipe away any accumulated gunk, lint, hair, and especially mold or mildew that may be hidden beneath. For stubborn residue or hard-to-reach areas, use a small brush to scrub effectively. Continue cleaning until the entire seal is spotless, ensuring all debris is removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CGVF42gee8I</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9875-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A4guMCZ_lXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Front-Loader Door Seal — Washing Machine Cleaning</video:title>
      <video:description>Begin by addressing the door seal of a front-loading washing machine. Wearing rubber gloves, use a sponge or microfiber cloth dampened with vinegar to thoroughly wipe away any mold, mildew, dirt, and grime from the seal. Pay particular attention to the area behind the lip of the seal where dirt tends to accumulate. For stubborn mold and mildew stains, apply vinegar directly to the stain and let it sit for 20 minutes before scrubbing again. A toothbrush can be used for tough patches. After cleaning, use a paper towel to dry the seal completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A4guMCZ_lXw</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9876-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EDVyDPzjS1k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Washer and Dryer Exteriors — Washing Machine Cleaning</video:title>
      <video:description>After cleaning the floor, wipe down the tops and exteriors of the washing machine and dryer using a multi-surface cleaner and a microfiber cloth. The presenter notes significant dust and lint accumulation on these surfaces. Ensure to clean all accessible areas, including control panels and the sides of the machines. For heavily soiled areas or suspected mold/mildew growth on hard surfaces, a diluted bleach solution (e.g., 1 part bleach to 10 parts water) can be used, ensuring proper ventilation and wearing gloves. Follow with a clean, damp cloth to remove any residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EDVyDPzjS1k</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9876-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A4guMCZ_lXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Cycle &amp; Exterior Clean (Top-Loader) — Washing Machine Cleaning</video:title>
      <video:description>If you had to stop the top-loading cycle at any point (e.g., to open the lid for soaking), press &apos;start&apos; to resume the cycle and allow it to complete. While the machine finishes its cycle, use a damp rag to clean the exterior, including the top and sides of the washing machine, wiping away any splashes or dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A4guMCZ_lXw</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9876-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SeVOiHXqJ4Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Post-Cycle Manual Cleaning of Surfaces — Washing Machine Cleaning</video:title>
      <video:description>Upon completion of the high-temperature cleaning cycle, transfer any remaining dissolved dishwasher tablet solution (or prepare a fresh, diluted batch if necessary) into a spray bottle. Use this solution to spray the inner and outer surfaces of the washing machine door, the rubber seals (making sure to lift and clean under the folds), and any other visible exterior grime. Thoroughly wipe all sprayed surfaces with a clean, soft cloth or sponge to remove residual dirt and leave them clean and disinfected. Performing this manual wipe-down once a month is recommended for optimal maintenance and fresh-smelling laundry.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SeVOiHXqJ4Q</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9877-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y6ZpcvjFcvo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Drain Pump Filter — Washing Machine Cleaning</video:title>
      <video:description>Locate the drain pump filter, usually found in the bottom left corner of the LG combo unit. Place a towel on the floor and a shallow bowl underneath the drain pump access panel. Open the access panel and remove the small drain hose, allowing any residual water to drain into the bowl. Once the water has fully drained, cap the hose and secure it back into its clip. Be careful, as these hoses can sometimes retract into the washer, requiring needle-nose pliers to retrieve. Next, unscrew the main drain pump filter and check for any lint, coins, or small items from pockets that might have accumulated. Rinse and scrub the filter clean under running water. Once clean, screw it back in tightly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y6ZpcvjFcvo</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9877-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WxxOtXTiDUY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Filter — Washing Machine Cleaning</video:title>
      <video:description>Many modern washing machines are equipped with a filter, often located at the bottom front of the appliance, behind a small access panel. It&apos;s crucial to clean this filter every six months, as it can accumulate a significant amount of lint, debris, and &apos;gunk&apos; over time, which can hinder drainage and overall machine performance. Consult your washing machine&apos;s user manual for specific instructions on how to safely access, remove, clean, and reinstall the filter, ensuring everything is running smoothly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WxxOtXTiDUY</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9877-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wFubFK5vdOc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Drain Filter — Washing Machine Cleaning</video:title>
      <video:description>On front-loading washing machines, a hidden filter usually located behind a small trap door at the bottom front of the machine collects lint, debris, and other gunk. This filter should be cleaned once a month. First, open the trap door. You&apos;ll find a rubber tube; pull this tube out and remove its plug to drain any residual water into a plastic container. Observe the dirty water and gunk that drains out. Once all water has drained, replace the plug and put the tube back. Next, unscrew the main filter itself by turning it counter-clockwise. Pull out the filter, which will likely be covered in dirt, grime, hair, and fibers. Remove all this gunk manually. Spray the filter with your prepared maintenance cleaning solution, then use an old toothbrush to thoroughly brush and clean all parts of the filter. Rinse the filter completely under running water until clean. Allow it to dry. Once clean and dry, reattach the filter by screwing it back into place clockwise until secure. Finally, clean the inside of the trap door area with a microfiber towel and close the door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wFubFK5vdOc</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9878-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WxxOtXTiDUY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Second Cleaning Cycle (Vinegar) — Washing Machine Cleaning</video:title>
      <video:description>Once the initial baking soda cycle is complete, the next step is to add white vinegar. Pour two cups of plain white vinegar directly into the washing machine drum. For an optional pleasant scent, you can add 5 to 10 drops of lavender essential oil to the vinegar mixture. Close the washing machine door, then run another cycle on the longest and hottest setting. This vinegar-based mixture will help to disinfect the washer and remove any remaining film or odor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WxxOtXTiDUY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9878-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wFubFK5vdOc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run Baking Soda Cycle — Washing Machine Cleaning</video:title>
      <video:description>Begin the deep cleaning by adding 2 cups of pure baking soda directly into the washing machine&apos;s tub. Close the washer door. Select either the &apos;Normal&apos; cycle or, if available on your machine, the &apos;Tub Clean&apos; option. Set the water temperature to the hottest possible setting. Start and run the chosen cycle. The baking soda will act as a mild abrasive, helping to scrub the inner components and tub, while also effectively fighting odors during this cycle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wFubFK5vdOc</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9878-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kW3N9jGrG9I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run Hot Cleaning Cycles — Washing Machine Cleaning</video:title>
      <video:description>To clean the internal components and flush out any remaining residue, run two separate hot wash cycles. First, pour 1 box (approximately 16 ounces) of Arm &amp; Hammer Baking Soda directly into the empty washing machine drum. Run a very hot wash cycle. This will help neutralize odors and gently scrub the interior. Second, pour about 16 fluid ounces of white vinegar into the main wash compartment of the detergent dispenser drawer. Run another very hot wash cycle. This will dissolve mineral buildup and further clean the internal lines, ensuring a fresh and clean washing machine.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kW3N9jGrG9I</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9844-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S-Pv6V4Sw04/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Mower Blade and Tires — Lawn Mowing</video:title>
      <video:description>Inspect the mower blade for any signs of wear, damage, or dullness. A dull or damaged blade can lead to uneven cuts and put strain on the engine. If the blade is dull, sharpen it; if it&apos;s bent, cracked, or severely worn, replace it. Also, check the tires for excessive wear, cracks, or damage. Replace any tires that are worn or damaged to ensure smooth operation and proper traction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S-Pv6V4Sw04</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9844-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wr1kzfMp8EE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sharpen Mower Blade — Lawn Mowing</video:title>
      <video:description>Inspect your mower&apos;s blade for sharpness. A dull blade can rip and damage grass, leading to an unhealthy lawn, while a sharp blade provides a clean, even cut. You can purchase specialized tools to sharpen the blade yourself, or many hardware stores offer professional blade sharpening services. It&apos;s recommended to sharpen the blade at the beginning of the mowing season and again midway through the summer for best results. Always ensure the spark plug is disconnected before handling the blade for safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wr1kzfMp8EE</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9844-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PAhnmZV_XD8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Prepare for Mowing — Lawn Mowing</video:title>
      <video:description>The video begins with a person walking towards a manual reel mower, specifically a &apos;LawnMaster&apos; 16-inch model, situated on a grassy lawn. Before actively pushing the mower, it&apos;s crucial to prepare both the lawn and the equipment. Visually inspect the lawn for any debris such as small branches, rocks, or toys that could interfere with the mower&apos;s operation or damage its blades. Clear any such obstacles from your intended mowing path. Additionally, briefly check the reel mower itself; ensure its blades are clean and sharp, and verify that the cutting height is appropriately set for your grass type and desired lawn aesthetic. This preparatory phase sets the stage for efficient and safe mowing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PAhnmZV_XD8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9845-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PAhnmZV_XD8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Prepare for Mowing — Lawn Mowing</video:title>
      <video:description>The video begins with a person walking towards a manual reel mower, specifically a &apos;LawnMaster&apos; 16-inch model, situated on a grassy lawn. Before actively pushing the mower, it&apos;s crucial to prepare both the lawn and the equipment. Visually inspect the lawn for any debris such as small branches, rocks, or toys that could interfere with the mower&apos;s operation or damage its blades. Clear any such obstacles from your intended mowing path. Additionally, briefly check the reel mower itself; ensure its blades are clean and sharp, and verify that the cutting height is appropriately set for your grass type and desired lawn aesthetic. This preparatory phase sets the stage for efficient and safe mowing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PAhnmZV_XD8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9845-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KIFbPINEW8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mowing the Main Lawn — Lawn Mowing</video:title>
      <video:description>With all the edges and areas around obstacles neatly trimmed, proceed to mow the main areas of the lawn. Utilize a lawnmower, such as the &apos;Toro 30&apos; model shown, to cut the grass to a uniform and desired height. Push the mower in overlapping rows across the lawn to ensure complete and even coverage. For aesthetic appeal, consider mowing in a consistent pattern, such as parallel stripes, and alternate the direction of mowing with each session to prevent soil compaction and promote healthier grass growth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KIFbPINEW8A</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9845-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xIm2uHZHOOg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Do a 2-Minute Prep Walk — Lawn Mowing</video:title>
      <video:description>Before starting any leaf cleanup, take a quick 2-minute walk around your entire yard. During this prep walk, actively pick up any obstacles such as sticks, pine cones, toys, or hoses. These items can slow down your cleanup process or potentially clog your lawn mower. Additionally, observe your landscape beds, fence lines, porches, and driveways to identify areas where leaves have accumulated the most. This initial assessment helps you plan a more efficient cleanup strategy and prevents interruptions once you begin the main work.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xIm2uHZHOOg</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9846-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qMBD2W0RXkU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mow the Main Lawn in Straight Lines — Lawn Mowing</video:title>
      <video:description>Once the difficult areas are done, proceed to mow the main body of the lawn. Move the lawnmower up and down in straight lines, overlapping each pass slightly. This method ensures an even cut and a more professional-looking finish compared to randomly walking around the lawn.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qMBD2W0RXkU</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9846-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KIFbPINEW8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mowing the Main Lawn — Lawn Mowing</video:title>
      <video:description>With all the edges and areas around obstacles neatly trimmed, proceed to mow the main areas of the lawn. Utilize a lawnmower, such as the &apos;Toro 30&apos; model shown, to cut the grass to a uniform and desired height. Push the mower in overlapping rows across the lawn to ensure complete and even coverage. For aesthetic appeal, consider mowing in a consistent pattern, such as parallel stripes, and alternate the direction of mowing with each session to prevent soil compaction and promote healthier grass growth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KIFbPINEW8A</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9846-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OeB73twcP-U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mowing — Lawn Mowing</video:title>
      <video:description>When it&apos;s time to mow, there are several key considerations. Always mow only when the lawn is dry to prevent grass clippings from clumping, getting messy, and clogging your mower (a Kobalt 40V Max Brushless mower is shown). The type of grass you have will determine the optimal cutting height: cool-season grasses should be left taller, while warm-season grasses are typically cut shorter. A general rule of thumb is to only remove a maximum of one-third of the grass blade length at a time. Keep your mower blades sharp for a clean cut, which also helps the grass be more disease-resistant. For cool-season grasses, mow less frequently during the hotter months. Lastly, alter your mowing pattern with each cut (e.g., criss-cross) so the grass doesn&apos;t lean in just one direction, giving your yard a professional, park-like appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OeB73twcP-U</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9847-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-r8p1cjdXwU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Properly Clear Grass Clippings — Lawn Mowing</video:title>
      <video:description>After mowing your lawn, use a leaf blower to clear any grass clippings that have landed on hard surfaces such as sidewalks or driveways. The correct technique is to direct these clippings back onto the lawn. This practice helps maintain a clean appearance for your property and prevents environmental issues such as clogged storm drains and water pollution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-r8p1cjdXwU</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9847-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KIFbPINEW8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Cleanup and Blowing — Lawn Mowing</video:title>
      <video:description>As the final step in your lawn care routine, use a leaf blower, such as the &apos;Stihl&apos; backpack model shown, to thoroughly clear all grass clippings, dust, and other debris from hard surfaces. This includes wooden decks, concrete sidewalks, driveways, and brick pathways. Work methodically, directing the debris towards the lawn areas (where it can decompose and nourish the soil) or into a designated collection area for bagging and disposal. This meticulous cleanup provides a truly clean and polished appearance to the entire property.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KIFbPINEW8A</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9847-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K_0r4HbNHhU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Grass Clippings — Lawn Mowing</video:title>
      <video:description>After trimming the grass, use a broom to sweep all the detached grass clippings and debris from the paved areas and pathways. Collect them into a pile for easy disposal or composting, ensuring the hard surfaces are clean and clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K_0r4HbNHhU</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9848-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gEgzaqnHiJs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Mowing Deck — Lawn Mowing</video:title>
      <video:description>Finally, after each cut, ensure the underside of the mowing deck is clean. After disconnecting the spark plug wire for safety, carefully tilt the lawn mower onto its side. Use a garden hose with a spray nozzle to thoroughly wash away all accumulated grass clippings, dirt, and debris from the underside of the deck and around the blade. This prevents buildup that can reduce cutting efficiency and lead to rust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gEgzaqnHiJs</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9848-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NoYHWtCCdOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Post-Mow Cleaning — Lawn Mowing</video:title>
      <video:description>After you have finished mowing, it is important to clean any accumulated debris from the mower deck and engine. Use a brush to remove grass clippings and dirt. Exercise caution during this process, as the engine and surrounding components may still be hot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NoYHWtCCdOE</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9848-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TeZUBvkh0N8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Mower Deck (Blowing and Washing) — Lawn Mowing</video:title>
      <video:description>After every mowing session, use a leaf blower to clear grass clippings from the top of your mower deck and around the engine (as shown at 9:19-9:29). This prevents grass from accumulating and causing rust. Additionally, attach a hose to the wash port on your mower deck (visible at 9:48). Turn on the water, start the tractor, engage the blades, and let it run for 3-5 minutes. Make sure the deck is in its lowest position. This wash port system helps remove grass clippings from the underside of the deck, although it may not be perfect. The video demonstrates this process at 10:37-11:02. This routine cleaning prevents grass buildup, which can accelerate rusting of the deck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TeZUBvkh0N8</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9836-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SYT-Jc0jAvc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Thoroughly Pre-Vacuum the Carpet — Carpet Cleaning</video:title>
      <video:description>Before any wet cleaning, thoroughly vacuum the carpet multiple times to remove as much dry dirt, dust, and debris as possible. The speaker emphasizes that this is a critical step to prevent loose dirt from turning into muddy residue when wet solutions are applied. She demonstrates using both a Dyson and a Shark Navigator vacuum, showing the significant amount of dirt that can be collected even from seemingly clean carpets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SYT-Jc0jAvc</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9836-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GsY2NrTGluk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Vacuuming — Carpet Cleaning</video:title>
      <video:description>Begin by thoroughly vacuuming the car&apos;s floor mats and carpeted areas. The goal is to remove all loose debris and larger particles that can be easily picked up by the vacuum. Do not spend excessive time trying to remove deeply embedded dirt at this stage, as the subsequent steps will address that. The video demonstrates vacuuming one side of the car&apos;s rear floor to allow for a comparison of the before and after results.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GsY2NrTGluk</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9836-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1WBiBRhc6EI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Initial Vacuum — Carpet Cleaning</video:title>
      <video:description>After removing large debris, perform an initial vacuum pass over the entire carpeted area. Use a powerful vacuum cleaner, such as a shop vac, with a crevice tool or general carpet nozzle to pick up smaller, loose dirt, dust, and particles. This step clears the surface layer of contamination.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1WBiBRhc6EI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9837-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lMA6tC0hJfk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-treat Stubborn Stains — Carpet Cleaning</video:title>
      <video:description>Before starting the main cleaning, inspect the carpet for any particularly stubborn or visible stains. Apply a suitable pre-treatment solution, such as Bissell Professional Pet Stain &amp; Odor remover, directly to these &apos;trouble spots&apos;. Allow the pre-treatment to sit for the recommended time (check product instructions) to help break down the stains, which will make them easier for the carpet cleaner to remove during the hot water extraction process. This step is crucial for achieving the best possible cleaning results on heavily soiled areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lMA6tC0hJfk</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9837-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7dKifO8H2js/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-Cleaning Preparation — Carpet Cleaning</video:title>
      <video:description>Before operating the carpet cleaner, thoroughly vacuum the entire area of your floor that you intend to clean to remove loose dirt and debris. Next, pre-treat any stubborn stains using a pre-treatment solution of your choice, ensuring the entire stain is covered. Allow the pre-treatment solution to sit on the stain for 5 to 10 minutes, as recommended by the product&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7dKifO8H2js</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9837-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/os3Op41kyEE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Spray and Scrub Stains — Carpet Cleaning</video:title>
      <video:description>After the baking soda has done its work and you&apos;ve prepared the vinegar solution, direct the spray bottle towards any visible stains or particularly dirty areas on your carpet. Apply the solution until the spot is damp but not overly saturated. Immediately following the spray, use your scrub brush to gently but firmly scrub the treated areas. This action helps to work the vinegar solution into the carpet fibers, effectively lifting embedded dirt and loosening tough stains.</video:description>
      <video:player_loc>https://www.youtube.com/embed/os3Op41kyEE</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9838-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g8oi99gKkfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Cleaning Solution and Water — Carpet Cleaning</video:title>
      <video:description>To prepare for upright carpet cleaning, first fill the clean water reservoir. Press the button on the top of the reservoir to lift it off the machine. Fill one side of the reservoir with hot water directly from the tap (avoid boiling water). The other side is the solution reservoir, which should be filled with carpet cleaner. A 6-ounce bottle of Hoover carpet cleaner is typically included. On the front of the clean water reservoir, there&apos;s a knob to switch between &quot;rinse&quot; and &quot;wash&quot; cycles; ensure it&apos;s set to &quot;wash&quot; initially.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g8oi99gKkfI</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9838-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WLbs-Af8vzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix the Solution by Shaking — Carpet Cleaning</video:title>
      <video:description>Once all ingredients have been added to the container, securely screw on the lid. Then, shake the container vigorously for several seconds. This action ensures that all the powdered ingredients are fully dissolved and thoroughly mixed with the liquid components, creating a uniform and effective carpet cleaning solution ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WLbs-Af8vzA</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9838-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SYT-Jc0jAvc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Vinegar &amp; Hot Water Solution — Carpet Cleaning</video:title>
      <video:description>For a standard cleaning solution, prepare a mixture of distilled white vinegar and hot water in the reservoir of your carpet cleaning machine. Fill approximately two-thirds of the reservoir with hot water, and then add distilled white vinegar to fill the remaining one-third. The speaker notes that while common recommendations are 1:1 or 2:1 (water to vinegar) ratios, she personally uses a stronger 3:1 ratio (hot water to vinegar) for better results, highlighting the importance of using hot water to enhance cleaning effectiveness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SYT-Jc0jAvc</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9839-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SYT-Jc0jAvc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Carpet with Proper Technique — Carpet Cleaning</video:title>
      <video:description>When actively cleaning the carpet, use a slow and deliberate technique. Make a long, slow forward pass, simultaneously releasing the chosen cleaning solution (vinegar or OxiClean mixture) onto the carpet. This allows the solution sufficient time to penetrate the carpet fibers and begin to break down embedded dirt and stains. After the solution has been applied, let it dwell on the carpet for several seconds, or even up to a minute, to maximize its working time. Then, make a slow backward pass, allowing the carpet cleaner to effectively suction up the dirty solution and any dislodged grime. For very dirty carpets, this entire process may need to be repeated multiple times until the water extracted into the dirty water tank appears visibly cleaner, indicating thorough cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SYT-Jc0jAvc</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9839-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_31-tMl0PYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Carpet Cleaning (Spray and Vacuum) — Carpet Cleaning</video:title>
      <video:description>To clean the carpet, begin by holding the cleaning wand and pressing the spray trigger (located on the wand&apos;s handle) as you pull the wand backward across the carpet. This action sprays hot water and solution onto the carpet while the vacuum simultaneously extracts it. For optimal results and to remove as much moisture as possible, perform a second pass over the same area with the wand, but this time without pressing the spray trigger. This &apos;dry pass&apos; solely utilizes the vacuum to pull up any remaining water, significantly reducing drying time and preventing residue build-up. Repeat this spray-and-vacuum technique across the entire area you wish to clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_31-tMl0PYs</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9839-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3m-NbbMXsXA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stained Area (Spray, Scrub, Extract) — Carpet Cleaning</video:title>
      <video:description>Once the tool is attached, turn on the machine. Begin the cleaning process by spraying the stain or mess directly by pulling the trigger on the hose handle. After spraying, use the bristles of your chosen tool to scrub the spot. This action helps work the cleaning solution deeply into the carpet fibers, assisting in stain removal. Next, extract the liquid from the carpet. Do this by tilting the tool at an angle and slowly dragging or pushing it across the treated area. The machine&apos;s vacuum will then pick up the dirty water, which is collected in the dirty water tank. Continue this cycle of spraying, scrubbing, and extracting as needed until the stained area is clean and you are satisfied with the result.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3m-NbbMXsXA</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9840-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wtdEei2RhK0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Rinse and Water Extraction — Carpet Cleaning</video:title>
      <video:description>Thoroughly rinse the entire carpet surface with clean water from a hose, making sure to flush out any remaining cleaning solution and embedded dirt. Immediately follow with the heavy-duty squeegee tool to extract as much rinse water as possible, promoting faster drying and leaving the carpet fibers in a clean, restored state.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wtdEei2RhK0</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9840-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aHNVRbNh9SU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse Remaining Chemicals with Water — Carpet Cleaning</video:title>
      <video:description>After the stain has disappeared, fill the solution tank of your portable carpet cleaner with plain tap water. Go over the previously stained areas multiple times to flush out any remaining hydrogen peroxide and ammonia. This ensures the carpet is clean and free from any chemical residue, which could otherwise attract dirt or cause re-soiling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aHNVRbNh9SU</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9840-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g8oi99gKkfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Extract Carpet Thoroughly — Carpet Cleaning</video:title>
      <video:description>After the wash cycle, switch the knob on the clean water reservoir to the &quot;rinse&quot; cycle. Pull the trigger and perform one or two passes forward and backward over the same area. This dispenses clean water without cleaning solution, helping to rinse the carpet. Next, release the trigger and slowly move the machine over the carpet to extract as much liquid as possible. It is crucial to go very slowly during the extraction passes to maximize liquid removal. The carpet should feel damp, not soaking wet, once finished. After cleaning, allow the carpet to dry completely, possibly using a box fan to speed up the process. Avoid stepping on the wet carpet to prevent re-soiling with dirt from feet or shoes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g8oi99gKkfI</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9841-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-XdYB7FI8FE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Groom Carpet for Final Finish — Carpet Cleaning</video:title>
      <video:description>After completing the wet extraction, reel in all hoses (red and blue) back to the truck-mounted unit. Position a powerful air mover (fan) to accelerate the drying process of the cleaned carpet. For a final touch, use a carpet groom brush to gently rake the carpet pile in a uniform direction. This helps to stand the fibers up, remove any remaining wand marks, and leave the carpet looking fresh and even. The final appearance shows a significantly cleaner carpet with no visible stains.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-XdYB7FI8FE</video:player_loc>
      <video:duration>202</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9841-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h3DtMF68PvI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Accelerated Drying with Air Movers — Carpet Cleaning</video:title>
      <video:description>Place powerful air movers (blowers) around and, if possible, underneath the rug. Position them strategically to ensure maximum airflow across the rug&apos;s surface and through its pile. Directing airflow efficiently will significantly accelerate the drying process, preventing musty odors and inhibiting microbial growth. Allow the rug to dry completely before moving or using it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h3DtMF68PvI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9841-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/os3Op41kyEE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Vacuum Carpet — Carpet Cleaning</video:title>
      <video:description>Once you have scrubbed all the stained and dirty areas, allow the carpet to air dry completely. This step is essential; sufficient drying time prevents potential issues like mold, mildew, or a lingering damp smell. Depending on room ventilation and humidity levels, drying can take several hours. Once the carpet is thoroughly dry, use a vacuum cleaner to thoroughly vacuum the entire carpet. This final pass will remove all the dried baking soda, any remaining loosened dirt, and other residues, leaving your carpet deep-cleaned and refreshed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/os3Op41kyEE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9842-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lbf9ZCLay5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Groom Carpet Pile and Remove Excess Moisture — Carpet Cleaning</video:title>
      <video:description>After extraction, use a carpet grooming brush or a squeegee-like tool (as shown in the video) to gently brush the carpet pile in one direction. This helps to stand the fibers up, remove any remaining excess moisture, and achieve a uniform, factory-fresh appearance. For heavily saturated mats, follow up with a clean, dry microfiber towel to blot any remaining surface moisture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lbf9ZCLay5s</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9842-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h3DtMF68PvI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Groom the Rug Pile — Carpet Cleaning</video:title>
      <video:description>Use a specialized pile grooming tool or a stiff brush to gently rake or brush the rug&apos;s pile. This action helps to lift and separate the fibers, restoring their original texture and appearance after the deep cleaning process. It also ensures an even, fluffy finish and can help remove any remaining loose debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h3DtMF68PvI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9842-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-XdYB7FI8FE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Groom Carpet for Final Finish — Carpet Cleaning</video:title>
      <video:description>After completing the wet extraction, reel in all hoses (red and blue) back to the truck-mounted unit. Position a powerful air mover (fan) to accelerate the drying process of the cleaned carpet. For a final touch, use a carpet groom brush to gently rake the carpet pile in a uniform direction. This helps to stand the fibers up, remove any remaining wand marks, and leave the carpet looking fresh and even. The final appearance shows a significantly cleaner carpet with no visible stains.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-XdYB7FI8FE</video:player_loc>
      <video:duration>202</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9843-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pw3S6GwnJ_4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Steam and Vacuum — Carpet Cleaning</video:title>
      <video:description>Perform one final steaming session, followed by a thorough vacuuming, to ensure all remaining loose dirt and any moisture from the cleaning solutions are removed. The presenter demonstrates the final result, highlighting that while some areas might appear lighter due to sun exposure over time (not staining), the embedded dirt and stains are effectively gone. The carpet is left significantly cleaner and refreshed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pw3S6GwnJ_4</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9843-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1WBiBRhc6EI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Vacuuming — Carpet Cleaning</video:title>
      <video:description>Perform a final, thorough vacuum pass over the entire carpet area. This step is crucial to pick up all the dirt and debris that was loosened by the drill brush and blown out by the cleaning gun. Ensure you vacuum every section to achieve the cleanest possible finish, making sure to go over the areas where debris was concentrated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1WBiBRhc6EI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9843-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/os3Op41kyEE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Vacuum Carpet — Carpet Cleaning</video:title>
      <video:description>Once you have scrubbed all the stained and dirty areas, allow the carpet to air dry completely. This step is essential; sufficient drying time prevents potential issues like mold, mildew, or a lingering damp smell. Depending on room ventilation and humidity levels, drying can take several hours. Once the carpet is thoroughly dry, use a vacuum cleaner to thoroughly vacuum the entire carpet. This final pass will remove all the dried baking soda, any remaining loosened dirt, and other residues, leaving your carpet deep-cleaned and refreshed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/os3Op41kyEE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9825-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/14ce0wzqzOo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 1</video:title>
      <video:description>Begin by hammering a corner stake into the ground where the patio will start. Use a tape measure to define the first side&apos;s length (e.g., 6 feet), hammering in another stake. Repeat for all four corners, defining a 6x8 foot rectangle. String a mason&apos;s line around all the stakes to clearly outline the patio&apos;s boundaries. Finally, measure the two diagonals of the marked area to ensure it is perfectly square; the diagonal measurements should be equal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/14ce0wzqzOo</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9825-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xgBwbLsjTzE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 1</video:title>
      <video:description>Begin by marking the precise dimensions and shape of your future patio or walkway. Use wooden stakes to define the corners and key points of the area. Run string tightly between these stakes to create clear, straight lines that outline the perimeter. A measuring tape is essential to ensure all dimensions are accurate and consistent with your design plan.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xgBwbLsjTzE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9825-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DxtbvjBNiaA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 1</video:title>
      <video:description>Begin by clearly defining the perimeter of your new patio area. Use a measuring tape to ensure accurate dimensions. Drive wooden stakes or posts into the ground at the corners and along the edges, then run a string around these stakes to create a visual border for the patio. This will guide subsequent excavation and installation steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DxtbvjBNiaA</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9826-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/14ce0wzqzOo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 2</video:title>
      <video:description>Excavate the entire patio area to a depth of 7 inches. This depth accounts for 3.5 inches of drainage gravel, 1 inch of sand, and 2.5 inches for the paver stones. Use a tape measure and a straight board placed across the excavated area to periodically check the depth, especially in the center, ensuring a consistent 7-inch depth throughout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/14ce0wzqzOo</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9826-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx8cobKTcpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 2</video:title>
      <video:description>Begin by clearly defining the area for your paver patio. Use shovels to dig out and remove existing grass and topsoil from the designated area. Pile the excavated sod and soil to the side, outside of the immediate work zone, for later disposal or use. Ensure the excavated area is relatively even in depth, typically 6-8 inches deep depending on your paver and base material thickness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx8cobKTcpQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9826-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0NsJrLGZDwk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 2</video:title>
      <video:description>The first crucial step is to meticulously plan the size and layout of your desired patio. Following this, you will begin the site preparation by excavating the designated area. To accurately determine the required excavation depth, sum the individual thicknesses of your chosen pavers, plus an additional 1 inch for the sand bedding layer, and the specified thickness for your gravel base (the video recommends 4 inches for the gravel base). Once the excavation depth is calculated and the patio area is clearly marked out, compact the existing native soil thoroughly. You can achieve this using a hand tamp, or if you are working on a larger paver area, it is highly recommended to rent a more powerful compactor from a local hardware store for increased efficiency and effectiveness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0NsJrLGZDwk</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9827-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx8cobKTcpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 3</video:title>
      <video:description>After excavation, use a plate compactor to thoroughly compact the exposed soil base. Guide the compactor in overlapping passes across the entire area to ensure uniform density. Compacting the sub-base is crucial for preventing future settling and unevenness of the patio. For best results, lightly dampen the soil before compacting, but avoid making it muddy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx8cobKTcpQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9827-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6PFcYe8u9BI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 3</video:title>
      <video:description>After the base material is roughly leveled, use a plate compactor to firmly compact the entire area. Pass the compactor over the surface multiple times, ensuring each pass overlaps the previous one by about half the compactor&apos;s width. This step is essential for creating a dense, stable foundation that will prevent the pavers from settling or shifting over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6PFcYe8u9BI</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9827-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FcrmbU_36NA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 3</video:title>
      <video:description>After excavation, use a plate compactor to thoroughly compact the exposed soil. This crucial step ensures a stable and unyielding foundation for your patio, preventing future settling and unevenness. Make several passes over the entire area, overlapping each pass to achieve uniform compaction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FcrmbU_36NA</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9828-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AUujzcGkN-Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 4</video:title>
      <video:description>Next, install the gravel base. Gravel is transported, typically via a front-end loader filling a pickup truck, and then moved to the installation area using a wheelbarrow. Spread the gravel evenly over the compacted subgrade to a thickness of 4-6 inches. Use a rake or a straight edge to achieve a relatively level surface before thoroughly compacting the entire gravel layer with a hand tamper. Regularly check the level of the gravel base during this process to ensure consistency. This layer provides essential structural support and drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AUujzcGkN-Q</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9828-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lwubzTZlkrA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 4</video:title>
      <video:description>Lay down the initial layer of 3/4-inch gravel as the structural base for the patio. Spread the gravel evenly across the entire excavated area. Once a sufficient layer is in place, compact it thoroughly using a plate compactor to create a solid, stable foundation. After the initial compaction, add more gravel to achieve the desired total thickness (usually 4-5 inches after compaction) and level, then compact it again. This multi-pass compaction ensures the base is firm and provides excellent drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lwubzTZlkrA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9828-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xgBwbLsjTzE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 4</video:title>
      <video:description>Spread a layer of granular base material, such as crushed stone or gravel, over the compacted subgrade. The thickness of this layer typically ranges from 4 to 8 inches, depending on climate and traffic load. Use shovels to distribute the material evenly, then use a rake and a long, straight piece of lumber (screed board) to level it to the desired grade and thickness. After leveling, thoroughly compact the granular base with the plate compactor, making multiple passes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xgBwbLsjTzE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9829-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h6p1noo8eu8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 5</video:title>
      <video:description>Once all the paver blocks are properly aligned and the border pieces are in place, install edge restraints around the perimeter of the patio. Edge restraints are crucial to keep all the pavers from shifting or moving over time. Lay the edging directly on the paver base panels, making sure it hugs the outer edge of the pavers. Then, use a rubber mallet or hammer to drive 8 to 10-inch landscape spikes through the designated holes in the paver base panels and into the ground to securely fasten the edge restraints.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h6p1noo8eu8</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9829-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z1N_eHGIzj0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 5</video:title>
      <video:description>The team installs plastic edge restraints around the perimeter of the laid pavers. These restraints are secured to the ground using long spikes. The professional explains that these plastic rails are crucial for holding the entire paver system together and preventing the pavers from shifting or spreading over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z1N_eHGIzj0</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9829-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dLOpjlH3nP0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 5</video:title>
      <video:description>After all pavers are laid, install the edge restraint system. This is crucial for preventing the pavers from shifting or spreading over time. First, pull away a small amount of the sand from the edges of the installed pavers, creating a small trench. Place the plastic edge restraint along the perimeter of the circular patio, snug against the pavers. Secure the edge restraint into the ground using steel spikes or large nails, hammering them through the designated holes in the restraint. Space the spikes according to the manufacturer&apos;s recommendations to ensure maximum stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dLOpjlH3nP0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9830-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/neTbz1vcOD8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 6</video:title>
      <video:description>Pour bags of paver base sand over the compacted gravel. Use a rake to spread the sand evenly. Position the PVC pipes or metal conduits on the gravel as guides, then use a wooden plank (straight edge) to carefully screed and level the sand to a consistent depth. Remove any excess sand with a trowel or shovel, maintaining the desired grade for the paver bed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/neTbz1vcOD8</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9830-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tJQQn9dhA2A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 6</video:title>
      <video:description>Next, using a wheelbarrow, distribute approximately 2 tons of sand over the compacted aggregate base. Spread the sand to a uniform thickness of 1 inch. To ensure a perfectly level surface, lay down 1-inch plastic tubes as screed rails. Use a straight wooden board to drag across the tubes, leveling the sand. As you level sections, remove the tubes and fill their impressions with sand, then continue leveling the next section.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tJQQn9dhA2A</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9830-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F_3iLZrCuUE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 6</video:title>
      <video:description>With the screed rails in place, you are ready to add the bedding sand. This layer should be between 20 to 30 mm (0.8 to 1.2 inches) thick. Start by pouring some bedding sand along one side of the screed rail, establishing the initial height. Then, fill the space between the rails evenly with sand, ensuring it&apos;s slightly higher than the top of your rails. Once the sand is loosely spread, use your screed tool, resting it on the rails, and work your way across the area. Drag the screed along the rails to evenly spread and remove excess sand, creating a perfectly flat and level surface at the correct height. Finally, carefully remove the screed rails. Backfill the narrow gaps left by the rails with extra bedding sand and smooth them out using a trowel to complete your perfect paver base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F_3iLZrCuUE</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9831-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mFyA4KoBQ18/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 7</video:title>
      <video:description>Begin laying your pavers at the lowest elevation of your patio design and work your way uphill. For corners, use 6x9 inch pavers to create an offset bond, enhancing both stability and aesthetic appeal. When laying, gently place each paver to avoid disturbing the carefully screeded sand bed. While it&apos;s generally okay to step on freshly laid pavers, try to avoid stepping too close to the edges to prevent shifting. To ensure a natural and varied appearance, pull pavers from different corners of your pallet, working through multiple layers and bands simultaneously. Periodically stop and use a large square to check that your bond lines remain straight, maintaining the integrity of your pattern.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mFyA4KoBQ18</video:player_loc>
      <video:duration>127</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9831-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HhpjkIf2GXQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 7</video:title>
      <video:description>With the sand base perfectly level, begin laying the pavers. Start in a corner and work your way outwards to avoid disturbing the prepared sand bed. To ensure straight rows and consistent alignment, use stakes and a string line, or a long straightedge, as a guide. Maintain a consistent joint width between each paver. As each paver is placed, gently tap it into position using a rubber mallet to seat it firmly into the sand. Throughout the laying process, frequently check the pavers with a spirit level to ensure they are square and perfectly level. This regular checking is vital for a smooth and even finished surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HhpjkIf2GXQ</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9831-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WqIzDqapXzM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 7</video:title>
      <video:description>Carefully begin laying the pavers on the prepared sand bed, working from a fixed starting point (e.g., against the pool coping or a straight edge). Follow your chosen pattern (e.g., herringbone, running bond, or a custom mixed pattern as shown). Place each paver by hand, gently setting it into position. Use a rubber mallet to tap pavers down and seat them firmly into the sand bed, ensuring they are level with adjacent pavers. Maintain consistent joint spacing and use string lines or guides to keep rows straight and curves smooth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WqIzDqapXzM</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9832-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OufbLxgbg8k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 8</video:title>
      <video:description>Once the majority of the patio area is covered with full pavers, you will likely have irregular gaps around the perimeter or specific features. For these areas, you will need to mark individual pavers to fit. Use a marker or pencil to outline the exact shape required on the paver. Then, use a paver cutter or a wet saw to carefully cut the pavers to size. Once cut, install these custom-fitted pieces into their respective gaps, ensuring they maintain the pattern and are pressed tightly against adjacent pavers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OufbLxgbg8k</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9832-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EL1hkWZvp8Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 8</video:title>
      <video:description>As you lay the pavers, install edging along the perimeter of the walkway to provide stability and a clean border. Secure the edging using spikes, inserting one spike approximately every 12 inches along its length. Continue laying the remaining pavers for the walkway. For any pavers that need to fit specific shapes, such as around curves or at the end of the path, mark the cut lines on the paver blocks. You can then cut these blocks using a circular saw equipped with a concrete blade. An alternative method is to use a wet saw, which can provide cleaner cuts and reduce dust. If you&apos;re laying blocks tightly together along a curve, you can mark the curve directly on the blocks with a hose and then cut them in place using a circular saw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EL1hkWZvp8Q</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9832-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h6p1noo8eu8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 8</video:title>
      <video:description>To complete the patio border, you will need to cut some paver stones to fit any remaining irregular or partial spaces. First, accurately measure the dimensions of the space where the cut paver will go. Mark the cutting line on the paver stone using a marker and a straightedge. Wear appropriate personal protective equipment, including safety glasses and a dust mask. Use a circular saw fitted with a concrete blade to carefully cut the paver along the marked line. As an alternative, a wet saw can also be used, which can provide cleaner cuts and reduce dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h6p1noo8eu8</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9833-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dKq3sCJeiaA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 9</video:title>
      <video:description>Once all pavers are in place and the perimeter mortar has set, spread polymeric sand over the entire paved surface. Use a push broom to sweep the sand into all the joints between the pavers, ensuring they are completely filled. Remove any excess polymeric sand from the paver surfaces. Finally, thoroughly wet the patio with a fine mist from a water hose. This activates the polymers in the sand, causing it to harden and lock the pavers in place. Allow the patio to dry completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dKq3sCJeiaA</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9833-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VUflq3U1Uhw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 9</video:title>
      <video:description>Once all pavers are laid, distribute sand evenly over the entire patio surface. Use a push broom to sweep the sand around, ensuring it falls into all the joints and cracks between the pavers. This &apos;polymeric sand&apos; will fill the gaps, locking the pavers together and preventing future movement and weed growth. Continue sweeping until the joints are completely filled and the surface is clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VUflq3U1Uhw</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9833-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K7htQhRGb_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 9</video:title>
      <video:description>After all pavers are laid and edge restraints are secured, the final crucial step is to fill the paver joints with polymeric sand. Spread a generous amount of polymeric sand over the entire patio surface. Using a stiff broom, sweep the sand into all the joints between the pavers, ensuring they are completely filled. Continue sweeping until no sand is visible on the paver surface, and all joints are packed. Then, gently mist the entire patio with water using a hose with a spray nozzle. The water activates the polymers in the sand, causing it to harden and lock the pavers together, preventing weed growth and insect infestation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K7htQhRGb_g</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9834-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/neTbz1vcOD8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 10</video:title>
      <video:description>Once all pavers are laid, use a plate compactor to firmly press them into the sand bed. Run the compactor over the entire paver surface multiple times, working in different directions. This process ensures the pavers are stable, level with each other, and firmly seated, creating a durable and even patio surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/neTbz1vcOD8</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9834-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mFyA4KoBQ18/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 10</video:title>
      <video:description>With all pavers laid and restrained, it&apos;s time to interlock them securely using a plate compactor. Start the compactor and drive it directly over the entire paver surface. You&apos;ll want to compact your pavers firmly into the sand base. This process will help smooth out the surface and ensure all pavers are properly seated. Make sure to go over every paver several times to achieve optimal compaction and a stable, even patio.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mFyA4KoBQ18</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9834-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WYxR8-u5Y0I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Paver Patio — Step 10</video:title>
      <video:description>Once all the pavers are laid, use a vibratory plate compactor to settle them. Move the compactor evenly across the entire surface of the patio. Compacting helps lock the pavers into the base material, creating a stable and even surface that prevents the pavers from shifting over time. Repeat passes if necessary to achieve proper compaction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WYxR8-u5Y0I</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9812-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OwwYXwfQ9k8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 1</video:title>
      <video:description>Before proceeding with the faucet removal, go under the sink and locate the hot and cold water shut-off valves. Turn the handles of both valves clockwise until they are fully closed to stop the water flow to the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OwwYXwfQ9k8</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9812-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yHvt8osdncg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 1</video:title>
      <video:description>Turn off the water supply to the faucet. Locate the shut-off valves under the sink for both hot and cold water lines. Turn the valves clockwise to shut off the water flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yHvt8osdncg</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9812-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W4o5q0dwq7s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 1</video:title>
      <video:description>Access the area under the kitchen sink and locate the two water shut-off valves, one for hot water and one for cold. Turn the handle of each valve clockwise until it is fully closed. This will stop the flow of water to the faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W4o5q0dwq7s</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9813-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U1LjduSfpKE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 2</video:title>
      <video:description>Disconnect the water supply lines from the shut-off valves under the sink using a wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U1LjduSfpKE</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9813-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YUORKRV34a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 2</video:title>
      <video:description>Disconnect the water supply lines from the old faucet using an adjustable wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YUORKRV34a8</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9813-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eE13i0sBdNI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 2</video:title>
      <video:description>Disconnect the water supply lines from the shut-off valves using an adjustable wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eE13i0sBdNI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9814-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hUCou0L90SQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 3</video:title>
      <video:description>Remove the nuts securing the old faucet to the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hUCou0L90SQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9814-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZORe9xb-vC4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 3</video:title>
      <video:description>Unscrew the mounting nuts holding the faucet to the underside of the sink, either by hand or with an adjustable wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZORe9xb-vC4</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9814-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W4o5q0dwq7s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 3</video:title>
      <video:description>Locate the large ring nuts that clamp the faucet body to the sink. There is typically one on each side for a two-handle faucet. Turn these nuts counter-clockwise to loosen and remove them. You can usually do this by hand, but if they are tight, a basin wrench is the ideal tool.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W4o5q0dwq7s</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9815-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bvq48PVNch8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 4</video:title>
      <video:description>With all connections underneath the sink removed, grasp the old faucet from the top and lift it straight up. This will remove the entire assembly from the sink, exposing the mounting holes and the surface underneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bvq48PVNch8</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9815-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vSQ3UvIu59o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 4</video:title>
      <video:description>From underneath the sink, use the basin wrench to loosen and remove the plastic mounting nuts that secure the faucet to the sink. Once the nuts are removed, disconnect the old supply lines from the faucet base. After all connections are undone, pull the old faucet up and out of the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vSQ3UvIu59o</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9815-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Dx4w5LYfrHo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 4</video:title>
      <video:description>Remove the old faucet from the sink. Unscrew the mounting nuts underneath the sink using a basin wrench. Lift the faucet out from above the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Dx4w5LYfrHo</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9816-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yHvt8osdncg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 5</video:title>
      <video:description>Clean the sink surface around the faucet mounting holes to remove any old sealant or debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yHvt8osdncg</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9816-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7wdqHioyvAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 5</video:title>
      <video:description>After removing the old faucet, use a putty knife or scraper to carefully clean the area around the faucet hole on the sink&apos;s surface. Scrape away any old plumber&apos;s putty, sealant, rust, or mineral deposits to ensure the new faucet can sit flush and create a good seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7wdqHioyvAc</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9816-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R4oyH4KCD-o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 5</video:title>
      <video:description>Clean the area around the sink hole to prepare for the new faucet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R4oyH4KCD-o</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9817-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nyIF_NjjCw4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 6</video:title>
      <video:description>Install the new faucet following the manufacturer&apos;s instructions. This may involve attaching gaskets, a mounting nut, and water lines. Most new faucets include hoses that are pre-attached to the faucet for ease of installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nyIF_NjjCw4</video:player_loc>
      <video:duration>149</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9817-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U1LjduSfpKE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 6</video:title>
      <video:description>Unpack the new Moen faucet and its components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U1LjduSfpKE</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9817-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s4IK_Rd9wPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 6</video:title>
      <video:description>Begin by unboxing the new Glacier Bay faucet. Lay out all the components, including the faucet body, pull-down sprayer, deck plate, mounting hardware, and the hose weight. Briefly review the instruction manual to familiarize yourself with the parts and the overall installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s4IK_Rd9wPY</video:player_loc>
      <video:duration>138</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9818-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vSQ3UvIu59o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 7</video:title>
      <video:description>Take a small amount of plumber&apos;s putty and roll it between your hands to form a thin rope. Carefully apply this rope of putty around the entire perimeter of the faucet mounting holes on the sink deck. This will create a watertight seal when the faucet is installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vSQ3UvIu59o</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9818-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OwwYXwfQ9k8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 7</video:title>
      <video:description>With the underside of the faucet&apos;s base plate accessible, put on a pair of gloves. Take a generous amount of plumber&apos;s putty and knead it to soften it. Press the putty firmly into the recessed channel on the underside of the base plate. Continue adding and spreading the putty evenly around the entire perimeter of the plate, ensuring the channel is completely filled. The putty should be level with or slightly above the edge of the gasket to ensure it creates a tight seal when compressed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OwwYXwfQ9k8</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9818-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/riDY_Juwqr4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 7</video:title>
      <video:description>Place the gasket onto the new faucet&apos;s base. Apply plumber&apos;s putty around the base of the gasket to create a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/riDY_Juwqr4</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9819-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5E7XNxB-sfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 8</video:title>
      <video:description>Insert the new faucet into the sink holes and tighten the mounting nuts from underneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5E7XNxB-sfI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9819-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xbt-lKnPKz0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 8</video:title>
      <video:description>Install the new faucet by inserting it into the sink openings and securing it with the mounting nuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xbt-lKnPKz0</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9819-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8Uw_eL7-XtI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 8</video:title>
      <video:description>Install the new faucet by first placing the gasket supplied with the faucet on the underside of the faucet assembly. Thread the faucet through the faucet opening from above. From underneath, tighten the mounting hardware under the sink. Make sure it is about 1/2 inch below the bracket. </video:description>
      <video:player_loc>https://www.youtube.com/embed/8Uw_eL7-XtI</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9820-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vSQ3UvIu59o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 9</video:title>
      <video:description>Carefully place the new faucet into the mounting holes on the sink, pressing it down firmly onto the plumber&apos;s putty. From underneath, thread the plastic mounting nuts onto the faucet shanks and hand-tighten them. Use the basin wrench to give them a final tightening, securing the faucet firmly to the sink. Do not over-tighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vSQ3UvIu59o</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9820-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PfLYK1iCJzM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 9</video:title>
      <video:description>Position yourself underneath the sink to access the faucet&apos;s mounting hardware. The looseness is caused by the retaining nut that has worked its way loose over time. Place the jaws of the basin wrench around this nut. Turn the wrench handle to tighten the nut until it is snug. Ensure the faucet is properly aligned before fully tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PfLYK1iCJzM</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9820-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3KVVJJVamrs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 9</video:title>
      <video:description>Tighten the mounting nut from underneath the sink using a basin wrench or adjustable wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3KVVJJVamrs</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9821-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vSQ3UvIu59o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 10</video:title>
      <video:description>Connect the new braided supply lines. First, attach the lines to the corresponding hot and cold inlets on the new faucet, hand-tightening and then giving a final snug with the basin wrench. Then, connect the other end of the lines to the hot and cold shut-off valves, using a wrench to tighten the nuts while holding the valve body with another wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vSQ3UvIu59o</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9821-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/E77WSJsxQO0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 10</video:title>
      <video:description>Attach the faucet&apos;s hot and cold water supply lines to the corresponding shut-off valves. The lines are marked with red (hot) and blue (cold) indicators. Hand-tighten the nuts first, then use an adjustable wrench to tighten them snugly. Be careful not to overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/E77WSJsxQO0</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9821-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s4IK_Rd9wPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 10</video:title>
      <video:description>Connect the hot and cold supply lines from the new faucet to the corresponding shut-off valves. The hot line is typically marked with a red indicator. Hand-tighten the connection nuts first, then use an adjustable wrench to give them a final quarter-turn to ensure they are snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s4IK_Rd9wPY</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9822-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JeZwva0XYKU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 11</video:title>
      <video:description>Slowly turn both the hot and cold water shut-off valves back on by turning them counter-clockwise. Go to the top of the sink and turn the faucet handle on to test the flow of water. While the water is running, use a flashlight and a dry paper towel to thoroughly inspect all new connections underneath the sink—including the supply lines at the valves and the faucet, and the entire drain assembly—for any signs of dripping or leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JeZwva0XYKU</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9822-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZfgET7ye5dI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 11</video:title>
      <video:description>Slowly turn both shutoff valves counter-clockwise to turn the water back on. Use a flashlight to inspect all four connection points (two at the faucet, two at the valves) for any drips or leaks. Then, turn on the faucet and test both hot and cold handles to ensure correct connection and proper water flow. Let the water run for a minute to flush out any debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZfgET7ye5dI</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9822-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s4IK_Rd9wPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 11</video:title>
      <video:description>Slowly turn the hot and cold shut-off valves counter-clockwise to turn the water back on. Carefully inspect all connections under the sink (at the valves and the faucet body) for any drips or leaks. Then, turn the faucet on at the handle and test both hot and cold water flow, as well as the pull-down sprayer and its different modes. Perform a final check for leaks underneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s4IK_Rd9wPY</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9823-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/riDY_Juwqr4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 12</video:title>
      <video:description>Test the new faucet and soap dispenser by turning on the water supply and checking for leaks. Also test the spray hose and soap dispenser</video:description>
      <video:player_loc>https://www.youtube.com/embed/riDY_Juwqr4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9823-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U1LjduSfpKE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 12</video:title>
      <video:description>Turn on the water supply valves and test the new faucet for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U1LjduSfpKE</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9823-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YUORKRV34a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 12</video:title>
      <video:description>Test the new faucet to ensure proper operation and check for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YUORKRV34a8</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9824-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q053fJgRcPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 13</video:title>
      <video:description>With the faucet securely mounted, the presenter cleans up the excess plumber&apos;s putty that has squeezed out from under the base. He uses a small spatula to carefully scrape it away and then wipes the area with a paper towel. He follows up by spraying the entire faucet and surrounding countertop with a cleaner and wiping it down to leave a clean, finished appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q053fJgRcPM</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9824-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mhAzDp4M_cI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 13</video:title>
      <video:description>From the top of the sink, use a damp cloth or paper towel to wipe away the excess sealant that has squeezed out from underneath the strainer flange. This creates a clean, professional-looking finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mhAzDp4M_cI</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9824-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NfYOJKu4e-4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Kitchen Faucet Replacement — Step 13</video:title>
      <video:description>After all the components are tightened underneath, return to the top of the sink. Use a paper towel to carefully wipe away all the excess silicone sealant that has squeezed out around the edge of the drain flange. Do this immediately for a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NfYOJKu4e-4</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9803-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6jX-7yFm14E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 1</video:title>
      <video:description>Measure from the wall to the center of the plumbing fixture and mark it on the lumber attached to the ceiling. Make sure to measure from both sides of the room for greater accuracy. It is best to take measurements before you cut out the concrete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6jX-7yFm14E</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9803-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2_BOjkrumhQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 1</video:title>
      <video:description>The installer measures the space around the window using a tape measure and a square to determine the dimensions of the drywall sheets needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2_BOjkrumhQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9804-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7Q98AytIKk0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 2</video:title>
      <video:description>Protect the corners with a metal corner bead. Cut the bead with tin snips, leaving it about 1/2 inch short. Hold it tight against the corner. Because screws will distort the bead, nail it in place, placing screws every 9 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7Q98AytIKk0</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9804-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EASP7bIkk0k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 2</video:title>
      <video:description>The presenter demonstrates installing corner beads on the outside corners of the drywall.  He uses tin snips to cut the corner beads to the correct length. He applies all purpose joint compound to the corner beads to ensure a strong and lasting installation and uses a putty knife to embed and smooth the compound along the edges. He emphasizes the importance of checking the corner bead is installed squarely to prevent blisters and ensure a neat appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EASP7bIkk0k</video:player_loc>
      <video:duration>265</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9804-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EASP7bIkk0k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 2</video:title>
      <video:description>The presenter shows how to tape inside corners using paper tape and all-purpose joint compound. He uses a sideways wiping method and a lambswool roller for a cleaner finish. He emphasizes starting at the bottom and working upwards, ensuring a smooth, even application and avoiding any gaps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EASP7bIkk0k</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9805-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wihrjMMiD5g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 3</video:title>
      <video:description>Based on your measurements, measure and mark the pine boards. Use a miter saw to cut four pieces for the collar frame. Using miter cuts (45-degree angles) on the ends will create clean, professional-looking corners.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wihrjMMiD5g</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9805-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7Q98AytIKk0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 3</video:title>
      <video:description>Measure the length of each wall using a measuring tape. Cut the drywall sheets 1/4 inch shorter than the measured length using a utility knife and a straight edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7Q98AytIKk0</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9805-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-5yGPdSV9aM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 3</video:title>
      <video:description>After marking, use a saw (like a jigsaw) to carefully cut along the scribed line. Once the plank is cut, place it into its final position. The custom-cut edge will now fit snugly against the uneven wall, leaving no gaps and creating a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-5yGPdSV9aM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9806-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tK_miUkRDnU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 4</video:title>
      <video:description>Measure the length needed for the corner bead and cut it to size using tin snips. Ensure a gap of about a quarter-inch is present between the drywall and the fiberglass surround. Dry-fit the bead by inserting the wider, solid edge into this gap, ensuring the perforated edge sits flat against the face of the drywall. Confirm the fit before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tK_miUkRDnU</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9806-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gPS_ytssuOg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 4</video:title>
      <video:description>Dry-fit the piping to check measurements and fit before gluing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gPS_ytssuOg</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9806-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7Q98AytIKk0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 4</video:title>
      <video:description>Protect the corners with a metal corner bead. Cut the bead with tin snips, leaving it about 1/2 inch short. Hold it tight against the corner. Because screws will distort the bead, nail it in place, placing screws every 9 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7Q98AytIKk0</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9808-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/paxjcEB3ItQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 6</video:title>
      <video:description>For pop nail heads, drive in a drywall screw about 1 1/2 inches above or below to hold the drywall. Then drive in the pop nail, spackle, and sand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/paxjcEB3ItQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9808-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/paxjcEB3ItQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 6</video:title>
      <video:description>For pop nail heads, drive in a drywall screw about 1 1/2 inches above or below to hold the drywall. Then drive in the pop nail, spackle, and sand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/paxjcEB3ItQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/9808-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/paxjcEB3ItQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crown Molding Installation — Step 6</video:title>
      <video:description>For pop nail heads, drive in a drywall screw about 1 1/2 inches above or below to hold the drywall. Then drive in the pop nail, spackle, and sand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/paxjcEB3ItQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
</urlset>