<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"
        xmlns:video="http://www.google.com/schemas/sitemap-video/1.1">
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11261-1</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eshpVa6P3mY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Verify Rise and Run — Stair Tread Sizing</video:title>
      <video:description>According to the Uniform Building Code, the &apos;rise&apos; (vertical height from the top of one step to the top of the next) should be 8 inches for residential homes. The &apos;run&apos; (horizontal surface area or tread depth) should be 9 inches. The host uses a tape measure to illustrate these critical dimensions on an unfinished staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eshpVa6P3mY</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11261-2</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CqcgKulah_I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Rise and Run Concepts — Stair Tread Sizing</video:title>
      <video:description>The two fundamental components of a stair stringer, &apos;rise&apos; (vertical distance) and &apos;run&apos; (horizontal distance of the step), are defined. The video highlights the importance of ensuring all steps have the same rise for safety and code compliance. It briefly touches upon typical code regulations for maximum rise (around 8.5 inches) and minimum run (around 9 inches), advising viewers to check local building codes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CqcgKulah_I</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11261-3</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Rise and Run — Stair Tread Sizing</video:title>
      <video:description>Using the total rise measurement (109 inches), calculate the individual rise and run for each step. Start by dividing the total rise by a standard comfortable riser height (e.g., 7 inches). This gives an approximate number of risers (109 / 7 = 15.5). Since you can&apos;t have half a riser, round to the nearest whole number (15 risers). Divide the total rise by the number of risers to get the exact individual riser height (109 / 15 = 7.26 inches, or approximately 7 1/4 inches). Then, determine the run (tread depth). A common rule for comfortable stairs is that the rise plus the run should total between 17 and 18 inches. With a 7 1/4 inch rise, a 10-inch run gives 17 1/4 inches, which is within the comfortable range.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11262-1</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Fa50maWQh_I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjusting Stringer Layout for Nosing and Riser Thickness — Stair Tread Sizing</video:title>
      <video:description>In this final instructional segment, the video advises on how to compensate for both the stair nosing and the thickness of the riser when laying out and cutting the stair stringers. For instance, if risers are 3/4 inch thick and there&apos;s a 1-inch nosing, these dimensions must be factored into the stringer&apos;s starting point and subsequent cuts. The presenter stresses that to achieve the desired 10-inch tread run with a 1-inch nosing, everything (the stringer layout) needs to be shifted back by the combined dimension of the nosing and the riser thickness (e.g., 1 inch + 3/4 inch = 1 and 3/4 inches) to ensure correct overall stair alignment and prevent stair tread run from being too short.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Fa50maWQh_I</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11262-2</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Fa50maWQh_I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Defining Tread Run and Introducing Nosing — Stair Tread Sizing</video:title>
      <video:description>This segment explains the critical distinction between the &apos;tread run&apos; (the horizontal distance between risers, typically 10 inches in the example) and the &apos;effective tread depth&apos; when nosing is present. The video demonstrates that a 1-inch nosing is added to the front of the tread, causing it to overhang the riser below. This means the actual surface you step on (the effective tread depth) becomes 11 inches, even though the structural &apos;tread run&apos; dimension (measured from riser face to riser face) remains 10 inches. The presenter highlights this as a common point of confusion that needs careful consideration in stair design.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Fa50maWQh_I</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11262-3</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Fa50maWQh_I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualizing Tread Run with Nosing Overhang — Stair Tread Sizing</video:title>
      <video:description>The video visually reinforces the concept of nosing by showing the 3D stair model with the 1-inch overhang added to each tread. It reiterates that while the tread run (the space occupied by the stringer&apos;s horizontal cut) is 10 inches, the actual walking surface of the tread extends an additional 1 inch due to the nosing, making the total horizontal stepping surface 11 inches. The visual helps solidify the understanding that the stringer&apos;s dimensions (the cuts for the treads and risers) are based on the tread run, not the effective tread depth that includes the nosing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Fa50maWQh_I</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11259-1</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Rise and Run — Stair Tread Sizing</video:title>
      <video:description>Using the total rise measurement (109 inches), calculate the individual rise and run for each step. Start by dividing the total rise by a standard comfortable riser height (e.g., 7 inches). This gives an approximate number of risers (109 / 7 = 15.5). Since you can&apos;t have half a riser, round to the nearest whole number (15 risers). Divide the total rise by the number of risers to get the exact individual riser height (109 / 15 = 7.26 inches, or approximately 7 1/4 inches). Then, determine the run (tread depth). A common rule for comfortable stairs is that the rise plus the run should total between 17 and 18 inches. With a 7 1/4 inch rise, a 10-inch run gives 17 1/4 inches, which is within the comfortable range.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11259-2</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CArhhrGWBsg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Stair Dimensions — Stair Tread Sizing</video:title>
      <video:description>Begin by establishing the total height of the staircase. For example, the presenter measures a total height of 1600mm. Then, determine your ideal step height (riser), which is approximately 180mm. Divide the total height by the ideal step height (e.g., 1600mm / 180mm = 8.8). Since you cannot have a fractional step, round up to the nearest whole number (e.g., 9 steps). Finally, divide the total height by the rounded number of steps to get the exact riser height for each step (e.g., 1600mm / 9 = 177.7mm).</video:description>
      <video:player_loc>https://www.youtube.com/embed/CArhhrGWBsg</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11259-3</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/n_8nz6fLxS0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Stair Dimensions — Stair Tread Sizing</video:title>
      <video:description>The first step involves calculating the precise dimensions for your stair stringers. You will need the total height from the subfloor to the finished floor of the upper level. For this project, the height is 110 1/2 inches. The video recommends using a specialized construction calculator, such as the Construction Master Pro, to easily determine the riser height. Input the total floor-to-floor height (110.5 inches) as the &apos;rise&apos; into the calculator, then press the &apos;stair&apos; button to automatically calculate the individual riser height. In this case, it&apos;s 7 3/8 inches. If you don&apos;t have a construction calculator, you can use simple math by dividing the total height by your desired number of treads to find an approximate riser height. Also, consider your desired tread width, usually using a 2x12 for the treads themselves, and plan for a nosing (overhang) of approximately 1 1/4 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/n_8nz6fLxS0</video:player_loc>
      <video:duration>134</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11260-1</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Stair Tread Sizing</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11260-2</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c7jak2TlfDA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Bullnose Stair — Stair Tread Sizing</video:title>
      <video:description>Begin by measuring the total length and width of the bullnose stair. First, measure from the inside corner of the wall around the bullnose curve to the outer corner, bending the tape measure around the nose. This measurement is 28 inches. Next, measure the length of the entire stair, wrapping the tape measure along the base where the carpet will be installed. This measurement is 57 inches. Finally, measure the width of the stair tread, which is 29 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c7jak2TlfDA</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11260-3</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Sizing</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11258-1</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Sizing</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11258-2</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — Stair Tread Sizing</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11258-3</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4fML3-Qwo_c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Hardwood Pieces — Stair Tread Sizing</video:title>
      <video:description>Accurate measurement is critical for a professional finish. Use a stair tread template tool to precisely measure the length and angle of each stair tread and riser. This tool allows you to transfer the exact dimensions and angles to your hardwood flooring material. Mark the cut lines onto the hardwood pieces using a pencil. Use a miter saw for cross-cutting the wood to the determined lengths and angles. For ripping cuts, such as adjusting the width of a tread or riser, utilize a table saw. Ensure all cuts are clean and precise to minimize gaps during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4fML3-Qwo_c</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11263-1</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Rise — Stair Tread Sizing</video:title>
      <video:description>The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11263-2</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U_qBttWNBfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Staircase Height (Method 1) — Stair Tread Sizing</video:title>
      <video:description>With the laser level providing a horizontal reference on the top landing, the presenter uses a measuring tape to measure the total vertical height from this reference line down to the finished bottom floor level. He notes that the bottom floor already has granite installed, so the measurement is taken directly from its surface. This single measurement gives the total vertical rise of the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U_qBttWNBfI</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11263-3</loc>
    <lastmod>2026-10-10T14:04:23.407Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Stair Tread Sizing</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-10-10T14:04:23.407Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11257-1</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — measure turning treads</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11257-2</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — measure turning treads</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11257-3</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2rkFnsTztog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Risers — measure turning treads</video:title>
      <video:description>Use a stair tread jig to measure the exact dimensions of each riser. Place the jig on the stair, adjust its arms to fit snugly against the side stringers and the top of the current tread, and then lock it in place. Take the jig to your riser material (e.g., plywood), place the jig on it, and mark the cut lines with a pencil. Repeat this process for each riser, as each stair will likely have slightly different dimensions. Cut the marked riser pieces using a miter saw, carefully aligning the blade with your pencil lines. Label the back of each cut riser with its corresponding stair number and its top edge to maintain organization, as each piece is unique.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2rkFnsTztog</video:player_loc>
      <video:duration>131</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11254-1</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oAUp2WuHH6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust Layout for Riser and Nosing — measure turning treads</video:title>
      <video:description>Recognize that the initial floor marks represent the *face* of the stringer where the riser attaches. However, for a finished staircase, you need to account for the thickness of the riser material and the nosing (overhang) of the tread. Re-adjust your layout by measuring from the initial stringer-face mark. For example, if your riser is 3/4 inch thick and your nosing is 1 inch, you would move your effective plumb line back by 1 and 3/4 inches (3/4&quot; + 1&quot;). This new line will represent the *front edge of the nosing* for each step. Use the level again to verify the stringer against these adjusted marks. This ensures that when the risers and treads are installed, the nosing aligns correctly with the desired tread depth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oAUp2WuHH6M</video:player_loc>
      <video:duration>90</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11254-2</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hwZQcHGafM0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Tread Dimensions for Curved Sections — measure turning treads</video:title>
      <video:description>After placing the pre-cut nosing in position, the installer makes new marks along the edges where the tread will meet the wall and the nosing. He uses a measuring tape to measure the dimensions, such as 5 inches on one side and 10 and 5/8 inches on the other, for the long board. To ensure a straight cut line between these two points, he applies diagonal tape and then marks the line with a pencil using a beam level as a guide. This method helps account for any irregularities in the wall or the staircase itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hwZQcHGafM0</video:player_loc>
      <video:duration>269</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11254-3</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hwZQcHGafM0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Nosing Depth on Tread — measure turning treads</video:title>
      <video:description>Using a small piece of nosing (or a pre-made template), the installer marks a line on the existing stair tread. This line indicates the precise depth where the nosing will sit. This is crucial for establishing the front edge reference point for subsequent measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hwZQcHGafM0</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11256-1</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oAUp2WuHH6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Total Run — measure turning treads</video:title>
      <video:description>To find the total horizontal length (total run) of the staircase, multiply the individual tread depth by the number of treads. For example, if you have 13 treads, each 10 inches deep, the total run would be 13 * 10 inches = 130 inches (10 feet 10 inches). This measurement is crucial for laying out the full length of the staircase on the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oAUp2WuHH6M</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11256-2</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4hPhnwlLmtw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate the Total Horizontal Distance — measure turning treads</video:title>
      <video:description>The final dimension to calculate is the total horizontal distance (run) of the staircase. The formula applied in the video is to multiply the &apos;Number of Steps&apos; (which was previously established as being equal to the number of risers, 22) by the assumed Tread dimension (12 inches). This yields 22 * 12 inches = 264 inches. To convert this measurement into feet, 264 inches is divided by 12 inches per foot, resulting in a total horizontal distance of 22 feet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4hPhnwlLmtw</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11256-3</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zhQpS9I0qy8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Unit Run and Total Run — measure turning treads</video:title>
      <video:description>Now, determine the &apos;unit run&apos; (the depth of each step) and the &apos;total run&apos; (the overall horizontal distance the stairs will cover). A golden rule for comfortable stairs is that the sum of the unit rise and unit run should be between 17 to 18 inches. Given a unit rise of 7.25 inches, a unit run of approximately 10 to 10.5 inches would be suitable (e.g., 10.25 inches). To find the total run, count the number of rises determined in the previous step (e.g., 8 rises). The number of treads (or unit runs) will typically be one less than the number of rises. So, for 8 rises, there will be 7 runs. Multiply the unit run by the number of runs to get the total run. For example, 10.25 inches (unit run) * 7 (runs) = 71.75 inches total run.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zhQpS9I0qy8</video:player_loc>
      <video:duration>86</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11255-1</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U_qBttWNBfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Staircase Height (Method 1) — measure turning treads</video:title>
      <video:description>With the laser level providing a horizontal reference on the top landing, the presenter uses a measuring tape to measure the total vertical height from this reference line down to the finished bottom floor level. He notes that the bottom floor already has granite installed, so the measurement is taken directly from its surface. This single measurement gives the total vertical rise of the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U_qBttWNBfI</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11255-2</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eO6MiVsV_tg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Total Rise — measure turning treads</video:title>
      <video:description>The first step in calculating stairs is to determine the total rise, which is the vertical distance from finished floor to finished floor. The presenter measures from the top of the main floor&apos;s subfloor (rim) to the upstairs subfloor. He gets 118 and 5/8 inches. Since the finished floor on both levels will be 3/4 inch thick (hardwood downstairs, carpet and pad upstairs), he adds 3/4 inch to his measurement using a construction calculator (BuildCalc). The final total rise is 119 and 3/8 inches. This ensures that all individual risers will be equal in height after the finished floor is installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eO6MiVsV_tg</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11255-3</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Rise — measure turning treads</video:title>
      <video:description>The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11253-1</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure turning treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11253-2</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measure turning treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11253-3</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — measure turning treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11252-1</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure turning treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11252-2</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure turning treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11252-3</loc>
    <lastmod>2026-10-10T12:44:25.466Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — measure turning treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-10T12:44:25.466Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11248-1</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — measurements</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11248-2</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — measurements</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11248-3</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — measurements</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11251-1</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measurements</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11251-2</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — measurements</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11251-3</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RrQRqpVvgBc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure, Cut, and Install New Treads (Standard Steps) — measurements</video:title>
      <video:description>After the risers are in place, the standard rectangular treads are installed. Each tread, the horizontal surface of a step, must be measured accurately for its length and depth, including any overhang over the riser. The video displays wooden treads, likely pre-finished engineered wood or solid wood, chosen for their durability and aesthetic appeal. Using a measuring tape and pencil, mark the dimensions onto the new tread material. A miter saw or circular saw can be used for precise straight cuts. Apply construction adhesive to the top of the existing sub-tread and the top edge of the newly installed riser. Carefully place the new tread, ensuring it is flush against the back wall and has an even overhang. Press firmly and optionally secure with a nail gun and finishing nails for a robust installation. Work from the bottom step upwards to maintain alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RrQRqpVvgBc</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11249-1</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measurements</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11249-2</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measurements</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11249-3</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measurements</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11250-1</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — measurements</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11250-2</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measurements</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11250-3</loc>
    <lastmod>2026-10-09T21:55:22.059Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — measurements</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-09T21:55:22.059Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11245-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uML0-cY19Gk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Septic Tank Water Levels and Baffle Filter — Septic System Inspection</video:title>
      <video:description>Begin by safely locating and accessing the inspection points for your septic tank&apos;s drain field, which typically involves uncovering a lid. The video demonstrates two key observations. First, observe the water level at the exit pipe that leads from the septic tank to the drain field. For a drain field to be functioning properly, the water level should visibly remain *below* this exit pipe. This indicates that effluent is successfully being absorbed by the drain field. Second, locate the sanitary tee, also referred to as a baffle filter, on the other side of the tank (this is where effluent enters the drain field system). The water level should be *at* the level of this sanitary tee and should not rise *above* it. Additionally, visually confirm that the baffle filter itself is not clogged with solids or debris. If both conditions are met—the water level is below the exit pipe and at the baffle filter without any signs of clogging—then your septic tank drain field is considered to be working correctly, allowing the treated wastewater to drain out and percolate effectively into the surrounding soil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uML0-cY19Gk</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11245-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DISVD4qlRWw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspecting the Outlet Baffle — Septic System Inspection</video:title>
      <video:description>The presenter lifts a small, broken concrete lid to reveal the septic tank&apos;s outlet baffle. He points into the open hole, explaining that the effluent flows under a concrete wall (baffle) and then enters the drain field pipes. He reiterates that during the tank pumping, water was observed flowing back out of the drain field and into the tank, further confirming the drain field&apos;s poor absorption or blockage. He also points out that the concrete baffle lid itself was broken.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DISVD4qlRWw</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11245-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Function and Flow Test — Septic System Inspection</video:title>
      <video:description>With both septic tank lids open, a function and flow test is performed to assess the condition of the drain field. This test, while not explicitly detailed visually in the video, involves observing the water levels and flow within the tank and into the drain field. The goal is to ensure the drain field is functioning correctly, allowing wastewater to properly disperse into the soil and preventing backups.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11246-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dZ9xUgOOElM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Septic Tank Lids — Septic System Inspection</video:title>
      <video:description>Begin by inspecting the septic tank lids. Ensure that all lids are accessible, not buried under excessive growth, and securely fastened with bolts. Unbolted lids can be extremely dangerous due to the risk of falling into the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dZ9xUgOOElM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11246-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8BDBsLYbYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure and Maintain Access Lids — Septic System Inspection</video:title>
      <video:description>Ensure all septic system access lids are easily accessible for maintenance and inspection, but most importantly, securely fastened to prevent accidental entry. These lids should ideally include a safety screen underneath to prevent small animals or children from falling into the tank. This is a critical safety measure for any household with a septic system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8BDBsLYbYI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11246-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bJEm5WGfbYM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Septic Tank Lid — Septic System Inspection</video:title>
      <video:description>With the concrete lid successfully cast and demolded, it is carefully lowered back into the septic tank opening. The presenter uses lifting straps, connected to the embedded rebar handle, to safely maneuver the heavy concrete lid into its final position. The custom fit ensures a tight seal, which is crucial for preventing odors and maintaining the integrity of the septic system. He notes that while it might not be a &apos;perfect&apos; fit due to the irregular hole, it&apos;s a tight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bJEm5WGfbYM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11247-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-prDWaoX6Vc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill and Landscaping — Septic System Inspection</video:title>
      <video:description>Using the wheelbarrow, backfill the excavated area around the newly installed septic riser with the previously removed soil. Gently compact the soil to remove large air pockets, but avoid excessive force that could damage the riser. Then, apply a layer of fresh topsoil, spread grass seed (such as EZ Seed), or lay sod over the area to blend the riser into the surrounding landscape. Finally, water the newly backfilled and seeded/sodded area thoroughly to promote growth and help the soil settle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-prDWaoX6Vc</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11247-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K-5z7D-LDZo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill and Restore Site — Septic System Inspection</video:title>
      <video:description>After all septic system and drain field components are installed, carefully backfill the trenches and around the septic tank. Ensure that only the access risers of the septic tank remain visible at ground level. Smooth out the disturbed soil, and if desired, prepare the area for revegetation (e.g., planting grass) to restore the landscape to its original appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K-5z7D-LDZo</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11247-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0Z5KAIuMIBQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill and Finish — Septic System Inspection</video:title>
      <video:description>After the risers are installed and the lids are secured, the final step is to backfill the excavated areas with the displaced dirt. The presenter smooths out the soil around the newly installed risers. He suggests that the grass will eventually grow back over the area. Alternatively, grass seed can be applied for faster regrowth. This leaves the septic tank access points level with the ground, making future pumping significantly easier without the need for extensive digging.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0Z5KAIuMIBQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11239-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Septic Tank Access Points — Septic System Inspection</video:title>
      <video:description>The first step involves carefully locating the buried inlet and outlet access lids of the septic tank. This typically requires probing the ground and then digging to expose the lids. The video shows the process of excavating the soil to reveal these access points. Special care must be taken to avoid damaging any existing buried utility lines or irrigation systems during excavation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11239-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KiThznLYJ2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Access Septic Tank Lids — Septic System Inspection</video:title>
      <video:description>Begin by locating the septic tank lids. In this case, the customer had already dug up the outlet side lid. If the lids are buried, carefully excavate the soil around the access points until both the inlet and outlet lids are exposed and accessible. The video shows a shovel being used to clear soil around the access point. Note that septic tank lids can be heavy and require care when opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KiThznLYJ2U</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11239-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0Z5KAIuMIBQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Excavate Around Septic Lids — Septic System Inspection</video:title>
      <video:description>Once the outline of the septic tank is marked, use a shovel to carefully dig around the perimeter of the existing concrete lids. The goal is to fully expose the top surface of the lids and ensure enough space around them to comfortably work. The video shows digging a square-shaped hole around each lid. Once uncovered, a tape measure is used to measure the diagonal length of the lid to ensure the correct size riser will fit. The measurement shown is approximately 27-27.5 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0Z5KAIuMIBQ</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11240-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open Septic Tank Lids — Septic System Inspection</video:title>
      <video:description>Once the septic tank lids are exposed, carefully remove them to access the tank&apos;s chambers. The video demonstrates using a tool, possibly a small pickaxe or lid lifter, to pry open the lids. Special attention is required for the outlet side lid, as irrigation lines may be closely situated. The operator carefully shimmies off the lid to avoid breaking these lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11240-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dZ9xUgOOElM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Septic Tank Lids — Septic System Inspection</video:title>
      <video:description>Begin by inspecting the septic tank lids. Ensure that all lids are accessible, not buried under excessive growth, and securely fastened with bolts. Unbolted lids can be extremely dangerous due to the risk of falling into the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dZ9xUgOOElM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11240-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j5ORNB1Yp3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Septic Lid — Septic System Inspection</video:title>
      <video:description>To access the filter, locate the screws around the perimeter of the middle septic lid. Use an impact driver to efficiently remove these screws. The presenter explicitly mentions using a Makita brand impact driver, but any suitable impact driver or even a hand screwdriver can be used. Once all screws are removed, carefully lift the lid to expose the inside of the septic tank and the filter. Observe the water level; it should be below the filter line. If it&apos;s above, do not pull the filter out, as this indicates a potential issue with the leach field that needs to be resolved before cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j5ORNB1Yp3g</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11241-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j5ORNB1Yp3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove and Clean the Filter — Septic System Inspection</video:title>
      <video:description>With the lid removed, locate the septic filter. It typically has a T-shaped handle at the top. Grab the handle, give it a slight twist, and then slowly pull the entire filter assembly out of the tank. Carry the filter to an area with a garden hose. Using the hose with a nozzle, thoroughly spray down the filter, removing all accumulated sludge and debris. Continue spraying until the filter is visibly clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j5ORNB1Yp3g</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11241-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j5ORNB1Yp3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Introduction and Locate Filter — Septic System Inspection</video:title>
      <video:description>The presenter begins by emphasizing the importance of regularly cleaning the septic filter, ideally every six months, to prevent debris buildup and ensure proper functioning of the septic system&apos;s leach field. He then directs the viewer to locate the septic system&apos;s access points in their yard, which are typically three lids. The filter is usually found under the middle lid.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j5ORNB1Yp3g</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11241-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j5ORNB1Yp3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Septic Lid — Septic System Inspection</video:title>
      <video:description>To access the filter, locate the screws around the perimeter of the middle septic lid. Use an impact driver to efficiently remove these screws. The presenter explicitly mentions using a Makita brand impact driver, but any suitable impact driver or even a hand screwdriver can be used. Once all screws are removed, carefully lift the lid to expose the inside of the septic tank and the filter. Observe the water level; it should be below the filter line. If it&apos;s above, do not pull the filter out, as this indicates a potential issue with the leach field that needs to be resolved before cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j5ORNB1Yp3g</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11242-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8BDBsLYbYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pump Septic Tank Regularly and Monitor Sludge — Septic System Inspection</video:title>
      <video:description>Regularly pump out your septic tank to remove accumulated sludge and scum. The frequency of pumping depends on your household&apos;s usage, typically ranging from every three to five years. When a professional pumper services your tank, ask them to record the depth of the sludge layer. This information allows you to monitor your system&apos;s waste accumulation rate and make informed decisions about future pump-out schedules, promoting proactive maintenance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8BDBsLYbYI</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11242-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dZ9xUgOOElM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Inlet Sanitary Tee and Scum Layer — Septic System Inspection</video:title>
      <video:description>Inspect the inlet sanitary tee inside the septic tank. Look for any large accumulations of plastics, wipes, or other non-flushable items that could cause blockages or system issues. Also, check the scum layer for any unusual items that indicate improper flushing habits in the household. The presence of a mature scum layer is generally a good sign of proper system function.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dZ9xUgOOElM</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11242-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PUP8_IY-Sgs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Explain Septic Tank Function (First Chamber) — Septic System Inspection</video:title>
      <video:description>Wastewater containing both liquid and solids from all household drains (including toilets, bathtubs, and kitchen sinks) enters the first chamber of the septic tank. A T-shaped baffle at the inlet directs the incoming waste downwards, allowing heavier solids to settle at the bottom, forming a &apos;sludge layer&apos;. Concurrently, a &apos;scum layer&apos; of lighter materials (like oils, grease, and non-biodegradables) floats to the top. Crucially, natural biological action, involving anaerobic bacteria and enzymes, occurs in this sealed, oxygen-deprived environment. These microorganisms work to break down the solids, converting them into a more liquid state called effluent.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PUP8_IY-Sgs</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11244-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DISVD4qlRWw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspecting the Outlet Baffle — Septic System Inspection</video:title>
      <video:description>The presenter lifts a small, broken concrete lid to reveal the septic tank&apos;s outlet baffle. He points into the open hole, explaining that the effluent flows under a concrete wall (baffle) and then enters the drain field pipes. He reiterates that during the tank pumping, water was observed flowing back out of the drain field and into the tank, further confirming the drain field&apos;s poor absorption or blockage. He also points out that the concrete baffle lid itself was broken.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DISVD4qlRWw</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11244-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TylNB3sm9Zg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understanding the Baffle (Plastic Tee) Function — Septic System Inspection</video:title>
      <video:description>The host proceeds to open the middle inspection cover, revealing a crucial internal component: a plastic tee, also known as a baffle. This tee is strategically placed to ensure that only clarified liquid effluent can flow from one chamber to the next. It prevents floating solids (scum layer) and heavier settled solids (sludge layer) from exiting the chamber prematurely, protecting the downstream leach field from clogging. The water level typically sits around the middle of this tee.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TylNB3sm9Zg</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11244-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RBwcWvGoULc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Lids and Inspect Baffles — Septic System Inspection</video:title>
      <video:description>Using a specialized tool like the T&amp;T Top Popper, the heavy concrete septic tank lids are carefully lifted. Below the main lid, internal baffle caps are also removed. This provides clear access to both the outlet and inlet baffles for visual inspection. The inspection reveals significant root intrusion and sludge in the outlet line, indicating a severe blockage, and confirms the presence of an existing inlet baffle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RBwcWvGoULc</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11232-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HD6qpg_bk6o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Safety First: Disconnect Power and Water — Ice Maker Repair</video:title>
      <video:description>Before attempting any troubleshooting or repairs on your refrigerator, ensure that the appliance is completely disconnected from its power source by unplugging it from the electrical outlet. Additionally, locate the water shut-off valve, typically found underneath the kitchen sink, and turn it to the &apos;off&apos; position to stop the water supply to the refrigerator. These steps are crucial to prevent electrical shock and water damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HD6qpg_bk6o</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11232-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kZOhPcmUEaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prioritize Safety: Disconnect Power and Water — Ice Maker Repair</video:title>
      <video:description>Before attempting any repair on your refrigerator, it is imperative to prioritize safety. Begin by either unplugging the appliance directly from the wall outlet or by turning off the corresponding circuit breakers in your home&apos;s electrical panel. This action prevents any risk of electrocution during the repair. Additionally, locate the water supply line connected to your refrigerator (typically found behind or beneath the unit) and turn off the water valve to prevent leaks or water damage during the icemaker repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kZOhPcmUEaI</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11232-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A3t4euFb7XI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Safety Precautions and Power Disconnection — Ice Maker Repair</video:title>
      <video:description>Before beginning any repair on the ice maker, prioritize safety. First, unplug the appliance&apos;s power cord from the electrical outlet. It&apos;s also recommended to use an outlet tester to ensure the outlet has proper voltage before reconnecting the appliance later. Additionally, turn off the water supply to the ice maker to prevent leaks or spills during the repair process. This will typically involve turning a shut-off valve on the water line connected to the appliance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A3t4euFb7XI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11233-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7d-h99qDrsw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Ice Maker Unit — Ice Maker Repair</video:title>
      <video:description>After turning off the power, open the freezer door of the refrigerator. Inside, you will find storage trays or shelves, typically holding items like food or the ice bucket itself. Carefully remove these two trays to expose the ice maker unit, which is usually located higher up within the freezer compartment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7d-h99qDrsw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11233-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a0dsFxaDHHw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access and Remove Ice Maker Unit — Ice Maker Repair</video:title>
      <video:description>Begin by opening the refrigerator&apos;s freezer door. Remove any contents that might obstruct access to the ice maker, including the ice storage bin. Locate the ice maker unit, which is typically mounted inside the freezer compartment. Identify the two screws that secure the ice maker to the freezer wall or ceiling. Using a screwdriver, remove these two screws. Carefully pull the ice maker unit forward, then locate the electrical connector at the back. Press the release tab on the connector and gently unplug the ice maker unit from the main power supply.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a0dsFxaDHHw</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11233-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jUxfDC9AUzI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Ice Maker Compartment — Ice Maker Repair</video:title>
      <video:description>Open the refrigerator&apos;s left French door completely. Locate the ice maker compartment door within the freezer section and open it by pulling its handle. This action provides full access to the ice maker and its components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jUxfDC9AUzI</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11234-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PHcOXXj-1Dc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Ice Maker Tray — Ice Maker Repair</video:title>
      <video:description>Next, open the freezer and visually inspect the ice maker tray. Determine if there is any ice currently in the tray or if it&apos;s completely dry. The presence or absence of ice helps narrow down the problem: if there&apos;s ice but it&apos;s not being ejected, the issue is likely with the harvesting mechanism. If the tray is dry, the problem is more likely related to the water supply or fill cycle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PHcOXXj-1Dc</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11234-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J82zE-5USw4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect for Ice Buildup — Ice Maker Repair</video:title>
      <video:description>With the ice maker unit removed, the presenter inspects it for any visible ice buildup in the fill cup or other components. He finds no obvious ice. He then points to the fill tube inside the freezer compartment, where water enters the ice maker. He plans to use a hairdryer to blow hot air into this tube to see if any water drips out, which would indicate a frozen blockage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J82zE-5USw4</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11234-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4tobtM_Mf2w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Ice Maker Components and Arm Tension — Ice Maker Repair</video:title>
      <video:description>Open the freezer door and remove the ice bin to gain access to the ice maker. Observe if there are any ice cubes present in the bin, which indicates the ice maker was previously working to some extent. Next, locate the shut-off arm on the ice maker. This arm typically moves up and down to signal whether the ice bin is full. Gently move the shut-off arm to check for proper tension and ensure it moves freely without resistance. The &apos;out&apos; position of the arm signifies that the ice maker is in the &apos;on&apos; state. If there&apos;s no tension or the arm feels loose, inspect the spring attached to the arm, as it might have come off or become damaged.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4tobtM_Mf2w</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11235-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OWgZg8BD21o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Test Water Inlet Valve — Ice Maker Repair</video:title>
      <video:description>The water inlet valve controls the flow of water into the refrigerator for both the ice maker and dispenser. It is usually located at the back of the machine behind an access panel, though some models may have it in the fresh food section. Locate the ice maker solenoid, which is the component connected to the ice maker&apos;s water supply line. Remove the wiring harness connected to the solenoid. Set your digital multimeter to continuity mode. Touch one probe to each terminal of the solenoid. A working solenoid should show continuity. If there is no reading, the solenoid has failed. Failures can also be caused by a jammed plunger or a clog. Additionally, check the ice maker fill tube (a plastic tube on the back of the unit that guides water into the ice mold). If it&apos;s frozen, this usually indicates a small leak in the water valve&apos;s diaphragm, which can block water flow to the ice maker. If the solenoid fails or the diaphragm leaks, the entire water inlet valve will need to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OWgZg8BD21o</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11235-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TXIAwE2uMVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Water Supply and Tubing — Ice Maker Repair</video:title>
      <video:description>To troubleshoot water delivery, first, pull the refrigerator forward to access its back panel. Locate the manual shut-off valve for the water supply and turn it off. Disconnect the water inlet line from the water fill valve. Then, carefully turn the manual shut-off valve back on briefly to verify that there is adequate water pressure from the household supply. Next, inspect the outlet tubing that runs from the water fill valve to the ice maker. Most refrigerator water valves have a 1/4-inch tubing that runs to the ice maker. Disconnect this tubing and attempt to blow air through it to ensure it is not restricted or frozen. If air passes through, the tubing is fine.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TXIAwE2uMVE</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11235-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9B8XoBaykhg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Water Inlet Line — Ice Maker Repair</video:title>
      <video:description>As a final step, if all other troubleshooting attempts have failed, pull your refrigerator away from the wall to access the back. Inspect the water inlet line (a thin tube) that connects to the refrigerator for any damage, kinks, or blockages. A damaged or kinked line will prevent water from reaching the ice maker. If damage is found, the water line will need to be repaired or replaced to restore water flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9B8XoBaykhg</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11236-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OWgZg8BD21o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Ice Maker Components — Ice Maker Repair</video:title>
      <video:description>If the general checks don&apos;t resolve the issue, the ice maker unit itself may have failed. There are various styles of ice makers, but two common types are the half-moon style and the flex-tray style. The video demonstrates testing a popular Whirlpool half-moon design. Remove the cover of the ice maker unit to expose the control module. Use a digital multimeter set to ohms to test the following components:  1.  **Mold Heater**: Insert probes into the &apos;L&apos; and &apos;H&apos; holes. A good reading should be around 72 ohms.  2.  **Motor**: Insert probes into the &apos;L&apos; and &apos;M&apos; holes. A good reading should be between 4400 and 8800 ohms.  3.  **External Water Valve Solenoid**: Insert probes into the &apos;V&apos; and &apos;N&apos; holes. A good reading should be around 300 ohms.  4.  **Mold Thermostat**: Insert probes into the &apos;T&apos; and &apos;H&apos; holes. When the thermostat is cold (below 15°F), it should show continuity (a reading of 0.0 ohms or close to it). After allowing it to warm up (above 15°F), it should no longer show continuity (an &apos;OL&apos; or open loop reading). If any of these tests yield no reading or a reading significantly different from the expected values, the component has likely failed and the ice maker will need repair or replacement. For newer models, consult your manual for built-in test procedures, often involving a test button or paperclip insertion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OWgZg8BD21o</video:player_loc>
      <video:duration>231</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11236-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HD6qpg_bk6o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Crescent-Style Ice Maker Components with Multimeter — Ice Maker Repair</video:title>
      <video:description>For crescent-style ice makers, several components can fail. First, remove the ice maker&apos;s cover to expose the control module. Set your digital multimeter to ohms (Ω) mode.   1.  **Test the Mold Heater**: Place one probe into the &apos;L&apos; hole and the other into the &apos;H&apos; hole. A healthy mold heater should read approximately 72 ohms. If the reading is &apos;OL&apos; (Overload) or significantly different, the heater is faulty and needs replacement. 2.  **Test the Motor**: Place one probe into the &apos;L&apos; hole and the other into the &apos;M&apos; hole. The motor should register a reading between 4400 and 8800 ohms. An &apos;OL&apos; reading indicates a failed motor. 3.  **Test the External Water Valve Solenoid**: Place one probe into the &apos;V&apos; hole and the other into the &apos;N&apos; hole. This test checks the external water valve solenoid, which should show approximately 300 ohms. An &apos;OL&apos; reading means the solenoid has failed. 4.  **Test the Mold Thermostat (Cold)**: Place probes into the &apos;T&apos; and &apos;H&apos; holes. When the ice maker is below 15°F, the thermostat should show continuity (a low resistance reading, typically near 0 ohms). If it does not, the thermostat is faulty. 5.  **Test the Mold Thermostat (Warm)**: Allow the ice maker to warm up above 15°F. Once warm, retest the &apos;T&apos; and &apos;H&apos; holes. The thermostat should now show no continuity (&apos;OL&apos; reading). If it still shows continuity, the thermostat is faulty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HD6qpg_bk6o</video:player_loc>
      <video:duration>163</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11236-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VCUgA5T5ASw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Electrical Component Testing — Ice Maker Repair</video:title>
      <video:description>The ice maker module contains specific test points that allow you to check various components using a voltmeter. For the Mold Heater, set your multimeter to measure resistance (Ohms). Insert the meter leads into the &apos;L&apos; and &apos;H&apos; terminals. A reading of around 72 Ohms indicates a functional mold heater. For the Timer Motor, insert the meter leads into the &apos;L&apos; and &apos;M&apos; test points. You should get a reading of approximately 4400 Ohms of resistance. For the Water Valve, it can be tested from the &apos;N&apos; and &apos;V&apos; test points. A reading between 150-350 Ohms of resistance typically means the water valve is operational. This is a useful test as it can be performed without removing the refrigerator. For the Thermostat, it can be tested from test points &apos;T&apos; to &apos;L&apos;. Remember that ice must be present in the ice maker&apos;s mold for the thermostat to close; merely being cold is not sufficient. If ice is present, you should get a reading of no resistance (a closed circuit).</video:description>
      <video:player_loc>https://www.youtube.com/embed/VCUgA5T5ASw</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11237-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uBOp6oe4O78/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Clean Ice Maker Tray — Ice Maker Repair</video:title>
      <video:description>If the ice maker is frozen, it must be completely thawed before inspection. First, remove the ice bucket assembly if it&apos;s present. Next, disconnect the wire harness that supplies power to the ice maker by carefully pulling it apart. Loosen or completely remove the mounting screws that secure the ice maker to the freezer wall. Gently lift the ice maker to detach it from its mounting brackets. Once removed, you can let it sit at room temperature for a period to allow any remaining ice to melt naturally, or use hot water for faster melting. After all ice has melted, wipe the entire ice maker unit thoroughly dry with a cleaning cloth. Carefully inspect the ice maker tray for any visible cracks or holes that could be causing leaks. Also, check the Teflon finish inside the ice molds for signs of wear, as a degraded finish can cause ice cubes to stick and lead to spillage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uBOp6oe4O78</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11237-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yAVPsjrIAOY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Water Inlet — Ice Maker Repair</video:title>
      <video:description>Locate the water inlet and its associated sensor, which often become clogged with mineral deposits and gunk. This buildup prevents the machine from accurately detecting water levels, leading to improper filling and poor ice production. Use a small brush, such as a toothbrush or a straw brush, to thoroughly scrub away all visible gunk from the water inlet channel and the sensor. Once thoroughly scrubbed, rinse the area completely using clean water, possibly from a spray bottle, to ensure all debris is flushed away.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yAVPsjrIAOY</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11237-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W1asrLiN9-k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Drain Cap and Cleaning Status — Ice Maker Repair</video:title>
      <video:description>Open the door of the ice maker. Inside, locate the drain cap, typically at the bottom of the reservoir. Check if the drain cap is securely tightened. A loose drain cap can lead to improper drainage and affect ice production. Also, observe the &apos;Clean&apos; light on the control panel. If this light is illuminated, it indicates that the unit requires cleaning. Ice makers should be cleaned every nine months to maintain optimal performance and prevent mineral buildup that can hinder ice production.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W1asrLiN9-k</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11238-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uBOp6oe4O78/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Reconnection and Test — Ice Maker Repair</video:title>
      <video:description>Once all adjustments and components have been reinstalled, open the water shut-off valve to restore the water supply to the refrigerator. Plug the power cord back into the wall outlet to reconnect electricity. Carefully slide the refrigerator back into its original position, ensuring there are a couple of inches of space between the back of the refrigerator and the wall. This space is essential for proper airflow around the condenser coils. Finally, test the ice maker and refrigerator for proper operation. Allow the ice maker to cycle a few times and produce several batches of ice to confirm that the leak has been resolved and that ice is being produced correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uBOp6oe4O78</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11238-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8pT5YOurG8w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect and Test Refrigerator Functionality — Ice Maker Repair</video:title>
      <video:description>With the new ice maker securely installed, push the refrigerator back into its original position against the wall. Reconnect the water supply line that was previously turned off, ensuring all connections are tight to prevent leaks. Finally, plug the refrigerator back into the electrical outlet. Close the freezer door and allow the refrigerator to operate for a few hours. Periodically check the ice bucket to confirm that the new ice maker is filling with water, freezing, and automatically dropping ice cubes. A successful installation will result in a full ice bucket and the normal operational sounds of the ice maker.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8pT5YOurG8w</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11238-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j8K9_d4qazw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Checks and Test — Ice Maker Repair</video:title>
      <video:description>After all components have been reinstalled, close the ice maker door. Reconnect the power cord to the electrical outlet and turn on the water supply. Allow the ice maker to cycle and begin producing ice. Monitor the unit to ensure it is functioning correctly and producing ice as expected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j8K9_d4qazw</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11225-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HeIT8gTwAP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove and Organize Cabinet Components — Cabinet Painting</video:title>
      <video:description>Begin by emptying all contents from your cabinets. Systematically remove all cabinet doors, drawers, and any associated hardware, such as hinges and pulls. To keep track of these components for reassembly, place all removed hardware (like screws, hinges, and pulls) into small, individually labeled plastic bags. Concurrently, use blue painter&apos;s tape and a marker to label each detached door and drawer with a unique identifier (e.g., &apos;A&apos;, &apos;B&apos;, &apos;C&apos;) and place a corresponding label inside the cabinet frame where it belongs. This meticulous labeling prevents confusion during reinstallation. Once disassembled and labeled, transport all doors and drawers to a dedicated workspace, such as a garage or basement, as the entire project is expected to span several days.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HeIT8gTwAP8</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11225-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i-eDlk2rlN4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove and Label Cabinet Doors &amp; Hardware — Cabinet Painting</video:title>
      <video:description>Begin the project by removing all cabinet doors and any existing hardware, such as hinges and doorknobs. It is crucial to label each door and piece of hardware with a numbering system (e.g., &apos;door 1&apos;, &apos;door 2&apos;) using a marker and painter&apos;s tape. This meticulous labeling ensures that each component can be reinstalled in its original position later, preventing confusion, especially when working on an entire kitchen with multiple doors and drawer faces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i-eDlk2rlN4</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11225-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xkzx-2MSJDk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Cabinets for Painting — Cabinet Painting</video:title>
      <video:description>First, completely empty all contents from your kitchen cabinets. Next, use a screwdriver to remove all cabinet doors and drawers. Once removed, use the screwdriver to take off all hinges, knobs, pulls, and any other hardware from the doors and drawers. As you remove each piece, use painter&apos;s tape to label it with its original location (e.g., &apos;upper left&apos;, &apos;bottom right drawer&apos;) so it can be reattached to the exact same spot later. Place all hardware into storage bags, labeling the bags to correspond with the cabinet pieces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xkzx-2MSJDk</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11226-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xkzx-2MSJDk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Protect Surfaces — Cabinet Painting</video:title>
      <video:description>Before cleaning, use painter&apos;s tape to protect all wall edges, countertops, and adjacent surfaces from paint. Spread plastic sheeting over your countertops, floor, and any appliances near the cabinets. Next, prepare your cleaning solution by mixing TSP (Trisodium Phosphate) with water in a spray bottle according to product instructions. Wearing safety glasses and rubber gloves, spray down all cabinet frames, doors, and drawers. Wipe down all surfaces thoroughly with a painter&apos;s rag to remove any grease, grime, or kitchen stains. Allow the surfaces to dry completely before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xkzx-2MSJDk</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11226-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WtYrlVnVRVw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Cabinet Surfaces — Cabinet Painting</video:title>
      <video:description>Thoroughly clean all surfaces of the cabinet doors, drawers, and boxes to be painted. Kitchen cabinets are prone to grease, food residue, and other grime, which must be completely removed for proper paint adhesion. Use a cleaner like Trisodium Phosphate (TSP) mixed with water, or a phosphate-free premixed cleaner. Apply the solution, let it sit for a few minutes, then wipe it off with a clean towel. Ensure no residue is left behind. For stubborn grime in corners, a 6-in-1 paint tool can be used gently to scrape it off. Protect countertops, backsplashes, and appliances with drop cloths or plastic sheeting before cleaning. Remember to wear safety gloves and glasses during this step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WtYrlVnVRVw</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11226-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/goT49x5bkR0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean All Cabinet Surfaces with TSP — Cabinet Painting</video:title>
      <video:description>Prepare a cleaning solution using TSP (Trisodium Phosphate) cleaner concentrate mixed with water in a spray bottle. Thoroughly spray and wipe down all cabinet frames, doors, and drawer fronts to remove any grease, dirt, and grime. This is a crucial step to ensure proper paint adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/goT49x5bkR0</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11227-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xkzx-2MSJDk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Clean Surfaces — Cabinet Painting</video:title>
      <video:description>After cleaning, thoroughly sand all cabinet surfaces. For flat areas of doors and drawers, use a sheet sander with 150-grit sandpaper to remove any existing finish and create a profile for primer adhesion. For more intricate areas and inside corners, use a 150-grit sanding sponge. Once all surfaces have been sanded, use a clean, damp painter&apos;s rag to wipe away all grit and dust. This ensures a clean surface for primer application and a smooth final finish. Wear a dust mask and safety glasses during sanding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xkzx-2MSJDk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11227-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HeIT8gTwAP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Protect Work Area and Sand Surfaces — Cabinet Painting</video:title>
      <video:description>Before sanding, meticulously protect your work area. Lay down a drop cloth over all countertops and floor areas to shield them from dust and paint. Use blue painter&apos;s tape to carefully mask off any adjacent walls, soffits, electrical outlets, and areas that you do not wish to paint. Once the area is protected, proceed to sand all cabinet frames, doors, and drawers. Use either medium-to-fine grit sandpaper folded in half or a sanding sponge for better grip and access to corners. Always sand with the grain of the wood, aiming to scuff the first layer of finish rather than removing it entirely. This creates a good &apos;tooth&apos; for the primer to adhere to. When sanding laminate sides of cabinet frames, ensure you apply light pressure to avoid damaging the edges. After all surfaces have been sanded, thoroughly clean up the resulting dust using a vacuum cleaner, followed by a tack cloth to pick up any remaining fine particles, ensuring a perfectly smooth and dust-free surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HeIT8gTwAP8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11227-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LvaMmBCJz8s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand Cabinet Surfaces — Cabinet Painting</video:title>
      <video:description>Once the cabinets are clean and dry, sand all surfaces that will be painted. Use either 220-grit or 150-grit sandpaper to lightly scuff the surface. This process creates a slightly rough texture that allows the primer to adhere better, ensuring a durable and long-lasting finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LvaMmBCJz8s</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11228-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HeIT8gTwAP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Patch Surfaces — Cabinet Painting</video:title>
      <video:description>Thoroughly clean all cabinet frames (and later the detached doors and drawers) using a mixture of water and TSP cleaner. This general-purpose cleaner is highly effective at dissolving grease, grime, and dirt, which are particularly prevalent in kitchen environments. After cleaning, conduct a detailed inspection of all surfaces for any imperfections such as holes, gouges, or dings. Apply wood filler directly into these damaged areas and use a flexible putty knife to smooth the filler flush with the surface. Allow the wood filler to dry completely as per the manufacturer&apos;s instructions. Note that it&apos;s generally not necessary to fill existing hardware holes if you plan to reuse the same hardware. However, if you&apos;re installing new hardware with a different screw pattern, you will need to fill the old holes and drill new ones after the filler has dried and hardened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HeIT8gTwAP8</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11228-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/owxA_6XdzW8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill Blemishes on Carcass — Cabinet Painting</video:title>
      <video:description>Inspect the cabinet carcass for any blemishes, such as indents, chips, or holes. Use DAP Premium Wood Filler to fill these imperfections. Apply the wood filler with a putty knife, working it into every divot until the surface is smooth. Allow the filler to dry completely as per product instructions, then lightly sand the filled areas until they are flush with the surrounding surface. This wood filler is water-based, a 3-in-1 filler/sealer, fast-drying, and can also act as a grain filler if you desire to hide the natural wood grain before painting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/owxA_6XdzW8</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11228-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tscF34we9QM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair Imperfections with Wood Putty — Cabinet Painting</video:title>
      <video:description>Inspect all cabinet surfaces for any scratches, dents, or holes. Use wood putty to fill in these imperfections. Apply the wood putty with a putty knife, ensuring it fills the defect completely. Smooth out the putty with the putty knife. If you plan to change hardware with a different screw pattern, fill in the old screw holes with wood putty; otherwise, you can skip filling existing hardware holes if using the same hardware.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tscF34we9QM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11229-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WtYrlVnVRVw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Primer-Sealer — Cabinet Painting</video:title>
      <video:description>Apply a coat of primer-sealer to all cabinet surfaces. The primer plays a crucial role by enhancing paint adhesion, ensuring a smoother finish with fewer topcoats, preventing wood grain from showing through the paint, and increasing the overall durability of the new paint job. A water-based primer is recommended for water-based latex paint. Use a foam roller for flat surfaces and a foam brush for edges and corners. If you are changing the cabinet color drastically (e.g., from red to white) or painting bare natural wood, priming is essential. If the cabinets are already painted and you&apos;re not changing the color significantly, you might be able to skip priming. If painting with a specific color, ask to have your primer tinted to a similar shade to improve coverage. Always check the drying time specified on the primer can before proceeding to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WtYrlVnVRVw</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11229-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i-eDlk2rlN4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Primer Coat — Cabinet Painting</video:title>
      <video:description>Now that the surfaces are clean and prepped, it&apos;s time to apply a water-based interior primer. Pour the primer into a paint tray. Use a mini roller to cover large, flat areas of the cabinet doors and frame efficiently. For smaller details, edges, and areas that the roller cannot reach, switch to a paintbrush. Apply a thin, even coat of primer. A slight &apos;see-through&apos; effect is acceptable after the first coat, as subsequent finish coats will provide full opacity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i-eDlk2rlN4</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11229-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eZrvtm49fEo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Primer — Cabinet Painting</video:title>
      <video:description>Apply at least one coat of high-quality primer, such as Zinsser BIN Ultimate Stain Blocker, to all cabinet surfaces. Use a paintbrush for detailed areas and a small foam roller for larger flat surfaces. Primer ensures better paint adhesion, provides a uniform base, and helps block wood grain and stains from bleeding through the topcoat. Allow adequate drying time between coats as per product instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eZrvtm49fEo</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11230-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HeIT8gTwAP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint Cabinet Doors and Drawers — Cabinet Painting</video:title>
      <video:description>Apply the final paint coats to the cabinet doors and drawer fronts, following the same methodology used for the cabinet frames and primer application. Begin by using an angled paintbrush to carefully cover all detailed areas, edges, and any recessed panels or routed designs. It&apos;s crucial to feather out the paint thinly to prevent drips or thick spots. Once the intricate areas are painted, switch to a mini foam roller to apply paint to the larger, flat surface areas. Always work with the grain of the wood for a smoother appearance. As with previous steps, remember to &apos;lay off&apos; the paint with a final, light pass of a dry roller to remove any tool marks and achieve a uniform finish. Allow one side of the door or drawer to dry completely according to the paint manufacturer&apos;s instructions before flipping it over and painting the other side. Some individuals may opt to apply an additional coat of water-based polyurethane over the acrylic latex paint for enhanced durability and even easier cleaning. If doing so, ensure the polyurethane is also allowed to cure fully as directed by its manufacturer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HeIT8gTwAP8</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11230-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nHMFNj3i5j0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Paint to Cabinets — Cabinet Painting</video:title>
      <video:description>Now, apply the selected paint to your primed cabinet surfaces. The technique for painting is similar to priming: use even strokes with either a paintbrush for detailed areas or a roller for larger flat surfaces. When applying paint, finish each stroke by feathering it back into the wet paint to avoid harsh lines. It&apos;s crucial not to rush this process. Allow the paint to completely cure according to the specific dry times recommended by the paint manufacturer. As a &apos;pro tip,&apos; between coats, lightly go over the surface with a dry roller or brush to remove any paint buildup or imperfections, which helps achieve a smoother finish. After the first coat has dried completely, apply a second coat of paint for full coverage and durability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nHMFNj3i5j0</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11230-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xkzx-2MSJDk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply First Coat of Paint — Cabinet Painting</video:title>
      <video:description>After the primer has fully dried, begin applying the first thin coat of your chosen semi-gloss paint. Use a foam roller for the main flat surfaces of the cabinet doors and drawers, and a chip brush for any difficult-to-reach areas on the doors and the cabinet frames. Apply the paint in light, even strokes to avoid drips and achieve a smooth finish. Once the first coat is complete, allow it to dry for at least 3 hours, or as recommended by the paint manufacturer. Applying less paint in each coat will result in a faster and more even drying time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xkzx-2MSJDk</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11231-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S9_dMKJTFxQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Re-attach Hardware — Cabinet Painting</video:title>
      <video:description>Once all painted and clear-coated surfaces are thoroughly dry and cured, it&apos;s time to re-attach the hardware. Using your labeled plastic bags, identify the correct hinges and handles for each cabinet door and drawer. Screw the hinges back onto the cabinet doors and the handles onto both the doors and drawers using a cordless drill. If you filled existing holes and are installing new handles, you may need to mark and pre-drill new pilot holes for precise placement before securing them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S9_dMKJTFxQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11231-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xkzx-2MSJDk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Cabinets — Cabinet Painting</video:title>
      <video:description>Once the final coat of paint has dried completely, carefully remove all painter&apos;s tape and plastic sheeting. Retrieve your labeled hardware and storage bags. Using your screwdriver, reattach all knobs, pulls, and hinges to their corresponding cabinet doors and drawers. Finally, mount the cabinet doors and drawers back onto the cabinet frames in their original positions, referring to your labels from Step 2. Take care not to scratch the newly painted surfaces during reassembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xkzx-2MSJDk</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11231-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i-eDlk2rlN4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Hardware and Doors — Cabinet Painting</video:title>
      <video:description>Once all paint coats are completely dry and cured, reassemble the cabinet. Begin by reattaching the hinges to the cabinet doors and then to the cabinet frame. Next, reinstall the doorknobs or pulls. Refer to the numbering system you created in the first step to ensure each door and piece of hardware is returned to its precise original location for a perfect fit and alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i-eDlk2rlN4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11214-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5lkKN3wjnug/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Protect Surfaces from Dust — Hardwood Floor Refinishing</video:title>
      <video:description>After removing the baseboards, protect all surrounding surfaces from dust. Use blue painter&apos;s tape to tape off all doors, windows, cabinets, vents, stairwells, and fireplaces. Cover larger surfaces like cabinets, windows, and firepaces with plastic sheeting, securing the edges with blue tape. This will prevent sanding dust from infiltrating other areas and significantly reduce cleanup time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5lkKN3wjnug</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11214-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q00T2eZDc5g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Trim and Isolate Room — Hardwood Floor Refinishing</video:title>
      <video:description>Before any sanding begins, perform essential prep work. First, remove the quarter round (also known as shoe molding) from around the baseboards. This allows sanding equipment to get as close as possible to the walls. Next, clear the room of all furniture and other items. Finally, seal off the room from the rest of the house using plastic sheeting and painter&apos;s tape to contain dust, and set up a fan in a window to exhaust dust to the outside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q00T2eZDc5g</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11214-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7cgemtIMM1k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Room for Sanding and Ensure Safety — Hardwood Floor Refinishing</video:title>
      <video:description>Before beginning any sanding, prepare the room to mitigate dust. Apply painter&apos;s tape over all outlets, light switches, door handles, and any other surfaces you want to protect from sawdust. Consider placing a box fan in a window to create negative pressure and help exhaust dust from the room. Crucially, wear a high-quality dust mask (like an N95 respirator) to protect your lungs from inhaling fine wood dust, which can be present in very high quantities during the sanding process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7cgemtIMM1k</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11215-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_ds2ZtA_jXY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drum Sander Test Run and Operation — Hardwood Floor Refinishing</video:title>
      <video:description>Attach a 100-grit sandpaper belt to the drum sander. This is the least abrasive grit and is ideal for a test run to get a feel for the machine&apos;s power and handling. When turning on the drum sander, ensure the drum is raised off the floor. Once it&apos;s turned on, move it forward before slowly lowering the drum onto the floor. When reaching the end of a pass or the far wall, raise the drum off the floor before stopping the machine. Failure to follow this sequence can lead to gouges and damage to the floor. The drum sander is powerful and pulls forward due to the spinning drum, so be prepared to pull back slightly as you operate it. Overlap each pass by a couple of inches to ensure even sanding; use a metal rod on the machine as a visual guide for consistent overlap. For more challenging areas or those with significant damage, you may need to start with a coarser grit, such as 36-grit, as observed during the project.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_ds2ZtA_jXY</video:player_loc>
      <video:duration>245</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11215-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q00T2eZDc5g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Aggressive Sanding with Drum Sander (Coarse Grits) — Hardwood Floor Refinishing</video:title>
      <video:description>For floors with significant wear or deep scratches that require complete finish removal, switch to a drum sander (like the American Sanders EZ-8). Begin with a very coarse 36-grit sandpaper. The key to operating a drum sander is constant motion to prevent gouging. Lower and raise the drum onto the floor gently as you move, similar to an airplane landing and taking off. Sand from the center of the room, working outwards. Overlap each pass by 30-50% to ensure thorough and even sanding. Always sand with the direction of the floorboards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q00T2eZDc5g</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11215-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/72OCeMLjp08/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rough-sand the Floor — Hardwood Floor Refinishing</video:title>
      <video:description>Choose the appropriate sander based on the condition of your floor. If the floor is badly worn, start with a drum sander (like the American Sanders EZ-8 shown in the video). Use a coarse sandpaper grit, such as 36 or 40. Practice on a sheet of plywood first to get accustomed to the machine. Move the drum sander with the grain of the floorboards, covering three to four-foot strokes at a time. Overlap each stroke by at least one-third of the belt width. After the initial coarse sanding, switch to a finer grit, like 60, and repeat the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/72OCeMLjp08</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11216-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q00T2eZDc5g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand Edges with Edging Sander — Hardwood Floor Refinishing</video:title>
      <video:description>After sanding the main floor with the drum sander, use an edging sander to reach the areas close to the baseboards that the larger machine couldn&apos;t access. The edging sander is designed with a disc that protrudes from the housing and features swivel wheels for control, allowing you to sand precisely along the perimeter of the room. Just like with the drum sander, progress through the same series of grits (36, 60, and 100) to match the smoothness of the rest of the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q00T2eZDc5g</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11216-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sMPgJnfcC8I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Edge and Corner Sanding — Hardwood Floor Refinishing</video:title>
      <video:description>After completing the main floor area with the drum sander, it&apos;s time to tackle the edges and corners. Use the edging sander for the perimeter of the room. Hold the edging sander firmly with both hands and work your way around the edge of the room, ensuring consistent pressure and movement. For the areas that the edging sander cannot reach, such as tight corners and detailed spots, use the corner sander to achieve a uniform finish across the entire floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sMPgJnfcC8I</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11216-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i3r7pQBnbhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Edge and Detail Sanding — Hardwood Floor Refinishing</video:title>
      <video:description>Once the main floor areas have been sanded with the drum sander, switch to an edge sander (such as an American Sanders machine shown in the video). Attach a coarse-grit sanding disc to the edge sander. Carefully maneuver the edge sander along the perimeter of the room, up to walls, around door frames, and near stair railings. This ensures that all areas missed by the larger drum sander are thoroughly sanded. For very tight corners or detailed areas, you may need to use a detail sander or perform hand sanding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i3r7pQBnbhE</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11217-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mg9Di-jLiFU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Buffing with Orbital Sander — Hardwood Floor Refinishing</video:title>
      <video:description>After the completion of the belt sanding stages, the floor is further refined using a rotary or orbital floor sander, commonly referred to as a buffer. This machine is equipped with a combination of 60, 80, and 100-grit buffing pads. The buffing process is essential for eliminating any subtle swirl marks or minor imperfections that may have been left by the belt sander, polishing the wood to an exceptionally smooth and even surface. This meticulous step ensures the floor is perfectly prepared and optimized for the final application of the protective finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mg9Di-jLiFU</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11217-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bWVZUD2O9Xo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Medium Sanding (80 Grit, With Grain) — Hardwood Floor Refinishing</video:title>
      <video:description>Transition to a finer grit of sandpaper by replacing the 40-grit paper on the drum sander with 80-grit sandpaper. Perform another full sanding pass over the entire floor, moving with the grain. This step is essential for removing the deeper scratches left by the 40-grit paper and beginning to smooth the floor to a more refined finish, preparing it for the final buffing stages.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bWVZUD2O9Xo</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11217-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9BT9L-B8_g8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fine Sanding/Buffing — Hardwood Floor Refinishing</video:title>
      <video:description>A different type of floor machine, appearing to be a lighter-duty orbital sander or buffer, is used for a finer sanding pass. This step is crucial for smoothing out any remaining imperfections from the coarse sanding and preparing the wood for stain and finish application. The floor, now free of old finish, gets a final refinement to ensure a perfectly smooth surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9BT9L-B8_g8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11218-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fjCG4CMGYGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fine Grit Sanding and Smoothing — Hardwood Floor Refinishing</video:title>
      <video:description>After filling the gaps and any necessary re-sanding, continue to sand the floor using progressively finer grits. The goal is to achieve a very smooth surface, ultimately finishing with a 150-grit sandpaper. This multi-stage sanding ensures all previous scratches and imperfections are removed, leaving the wood perfectly prepared for staining and lacquering.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fjCG4CMGYGk</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11218-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9BT9L-B8_g8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fine Sanding/Buffing — Hardwood Floor Refinishing</video:title>
      <video:description>A different type of floor machine, appearing to be a lighter-duty orbital sander or buffer, is used for a finer sanding pass. This step is crucial for smoothing out any remaining imperfections from the coarse sanding and preparing the wood for stain and finish application. The floor, now free of old finish, gets a final refinement to ensure a perfectly smooth surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9BT9L-B8_g8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11218-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/75Ul_SQEwSg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Floor Sanding with Orbital Sander (100-Grit then 120-Grit) — Hardwood Floor Refinishing</video:title>
      <video:description>For the final sanding stage, use a Power Drive orbital sander (sometimes referred to as a multi-disc sander or floor buffer with sanding pads). Start with 100-grit sandpaper to achieve a uniform scratch pattern across the entire floor, blending the drum-sanded and edge-sanded areas. Then, switch to an even finer 120-grit sandpaper for the final pass, leaving the red oak floor exceptionally smooth and ready for staining. Ensure thorough vacuuming after this step to remove all dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/75Ul_SQEwSg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11219-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pdxx7k7PRcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Thorough Dust Removal — Hardwood Floor Refinishing</video:title>
      <video:description>After all sanding stages are complete and the wood filler is dry, it is absolutely critical to remove every trace of dust and debris from the floor. Use a powerful vacuum cleaner to thoroughly vacuum the entire floor, ensuring you reach into corners, along edges, and even vacuum baseboards and windowsills where dust may have settled. Follow this with a dry mop or tack cloth to meticulously pick up any remaining fine dust particles that the vacuum might have missed. This meticulous cleaning ensures a pristine surface, preventing any dust from getting trapped in the stain or finish, which could result in a rough, uneven, or cloudy appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pdxx7k7PRcs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11219-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TZm6ryVDlNY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Dust — Hardwood Floor Refinishing</video:title>
      <video:description>Thoroughly vacuum the entire floor to remove all sanding dust. Pay special attention to corners, edges, and any crevices. A shop vacuum with a brush attachment is ideal for this. After vacuuming, use a tack cloth or a slightly damp microfiber cloth to pick up any remaining fine dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TZm6ryVDlNY</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11219-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YxU886QDUek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Thoroughly Clean and Remove All Dust — Hardwood Floor Refinishing</video:title>
      <video:description>Before applying any finish, it is absolutely critical to remove every speck of dust from the room. Begin by opening all windows and doors to create maximum ventilation and allow dust to escape the area. Then, use an electric leaf blower (a cordless, battery-operated one like the Makita BL 36V is highly recommended to avoid fumes and oil film) to blow dust off ceilings, walls, and all surfaces, directing it towards the open windows and doors. After this initial heavy dusting, use Clorox Triple Action Floor Dusters (or similar sticky dust cloths) attached to a flat head floor mop. These dusters are very sticky and effectively trap dust without leaving behind any chemical residue. Go over the entire floor surface at least twice with these dusters to pick up 100% of the remaining fine dust. Do NOT use a broom, as it will only push dust around and create airborne particles that can settle back on the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YxU886QDUek</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11220-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SoLn1vXY9AI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stain to Main Floor Area — Hardwood Floor Refinishing</video:title>
      <video:description>Begin applying the stain in a systematic manner, starting from a corner or edge of the room and working your way towards the exit. Dip the applicator pad into the stain, load it sufficiently, and then apply it to the floor. Use consistent pressure to push the stain into the wood grain. Immediately after applying the stain to a section, use a clean rag or towel to wipe off any excess. This ensures even penetration and prevents a sticky, grimy finish. Repeat this process for the entire floor area, moving methodically to avoid stepping on stained sections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SoLn1vXY9AI</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11220-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/72OCeMLjp08/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Area then Apply Stain — Hardwood Floor Refinishing</video:title>
      <video:description>After all sanding is complete, thoroughly vacuum the entire floor to remove any remaining dust. Then, wipe the floor with a tack cloth to pick up any fine particles that the vacuum might have missed. Once clean, apply your chosen wood stain using a foam applicator pad, working with the grain of the wood. As you go, remove any excess stain with a clean cotton cloth or paper towels to prevent blotching and ensure an even color.</video:description>
      <video:player_loc>https://www.youtube.com/embed/72OCeMLjp08</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11220-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m7Max2xBe80/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Wood Stain — Hardwood Floor Refinishing</video:title>
      <video:description>Once the floors are completely clean and dry from the stripping process, apply your chosen General stain. Pour the stain onto an applicator cloth and rub it onto the wood. Immediately after application, use a separate, clean cloth to rub off any excess stain. This &apos;wax on, wax off&apos; technique helps to ensure an even coat and proper absorption.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m7Max2xBe80</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11221-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AcMm7Zw1P_0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply First Finish Coat — Hardwood Floor Refinishing</video:title>
      <video:description>Apply the first coat of your chosen finish. The video uses a clear, matte acrylic polyurethane (Benjamin Moore Benwood &apos;Stays Clear&apos; Flat W425 00). Use a foam brush for precise application in corners and along edges, and a 3/16-inch nap roller attached to an extension pole for the main floor areas. Work in small sections, typically one to two feet at a time, because water-based finishes dry very quickly. The first coat will often appear splotchy and uneven, and the wood fibers will swell, making the surface feel rough once dry. This is normal, so &apos;trust the process&apos; and do not try to re-work areas once they start to dry.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AcMm7Zw1P_0</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11221-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Vw8W-ZyE7Ak/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Main Finish Coat — Hardwood Floor Refinishing</video:title>
      <video:description>After brushing the edges, use a T-bar applicator or a dedicated floor finish roller to apply the wood finish or sealant to the main body of the floor. Pour the finish directly onto the floor in a manageable line and spread it evenly using long, consistent strokes. Work across the room in sections, always maintaining a &apos;wet edge&apos; to prevent lap lines. Apply according to the manufacturer&apos;s recommended coverage rate and allow sufficient drying time between coats (typically 2-3 coats are applied).</video:description>
      <video:player_loc>https://www.youtube.com/embed/Vw8W-ZyE7Ak</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11221-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/72OCeMLjp08/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Finish — Hardwood Floor Refinishing</video:title>
      <video:description>After the stain has thoroughly dried (check product instructions for drying times), apply three to four coats of your chosen finish. Use a lamb&apos;s wool applicator for smooth, even application. Between each coat of finish, sand lightly with 220-grit sandpaper to eliminate heavy applications and imperfections, ensuring a perfectly smooth and durable surface. Clean any dust before applying the next coat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/72OCeMLjp08</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11222-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WbKgxJDVeYo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sanding the First Coat — Hardwood Floor Refinishing</video:title>
      <video:description>After the first coat of finish has dried, the surface will likely feel rough due to dust settling on the wet finish and wood fibers swelling (raised grain) from absorbing the finish. To address this, gently hand sand the entire surface with 320-grit sandpaper. Apply light pressure to avoid sanding through the finish completely. The goal is to smooth out the surface and remove any raised fibers or dust nibs, creating a perfect base for subsequent coats. If the sandpaper &apos;gums up,&apos; the finish isn&apos;t dry enough and needs more time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WbKgxJDVeYo</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11222-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/77nsY4EbVpg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand Between Coats with Sanding Sponge — Hardwood Floor Refinishing</video:title>
      <video:description>Once the first coat of finish (either Polycrylic or Enduro-Var) is completely dry, lightly sand the surface using a P320-grade sanding sponge. The goal is not to remove the finish but to gently knock down any raised grain or dust nibs, creating a perfectly smooth surface for the next coat. Sand until the surface feels smooth to the touch, ensuring an even, dull appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/77nsY4EbVpg</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11222-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b5INnRBV_dY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand Between Coats — Hardwood Floor Refinishing</video:title>
      <video:description>After the previous coat has dried, lightly sand the entire surface using 600 grit sandpaper wrapped around a sponge. The goal is to knock off any high spots or imperfections to ensure a perfectly smooth final finish. If the surface is particularly rough after the previous coat, you may opt to use a coarser grit like 320 or 400 sandpaper, but 600 grit is typically sufficient for intermediate sanding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b5INnRBV_dY</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11213-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2OrT2llvTTc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Floor — Hardwood Floor Refinishing</video:title>
      <video:description>After sanding, the floor needs to be thoroughly cleaned to remove all dust particles. This is often done with a powerful shop vacuum and potentially followed by a damp mop (using only water, no cleaning solutions) to ensure a clean surface for the new finish. This step is crucial for the final appearance and adhesion of the finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2OrT2llvTTc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11213-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dR8E5wUTaWw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Floors by Removing Obstacles — Hardwood Floor Refinishing</video:title>
      <video:description>Before beginning any sanding, thoroughly inspect the entire hardwood floor area for any obstacles that might damage the sanding equipment or obstruct the process. This includes staples, nails, or any other protruding objects. For staples, use a flathead screwdriver to gently pry them up, then pliers to pull them out. For nails, either remove them or use a nail punch to drive their heads below the surface of the wood. Ensure the floor is completely clear to avoid costly damage to your sander and to achieve an even finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dR8E5wUTaWw</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11213-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fjCG4CMGYGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Thoroughly Clean the Floor — Hardwood Floor Refinishing</video:title>
      <video:description>Before applying any finishes, it is critical to thoroughly clean the floor to remove all traces of sanding dust and debris. Use a powerful industrial vacuum cleaner (such as a Festool Cleantec) to vacuum the entire floor surface. Pay close attention to corners, edges, and crevices between the floorboards to ensure no dust remains, as this could compromise the finish. Perform a final inspection to confirm the floor is pristine.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fjCG4CMGYGk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11223-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_NU5cwh7UKE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allowing to Dry and Applying Subsequent Coats — Hardwood Floor Refinishing</video:title>
      <video:description>After the first coat of finish is applied, it must be allowed to dry completely according to the manufacturer&apos;s instructions. Drying times vary based on the type of finish, humidity, and temperature. Once dry, it&apos;s often recommended to lightly abrade (screen or buff) the floor with a fine-grit screen or sandpaper to ensure proper adhesion between coats and to smooth out any imperfections. After abrading, the floor should be thoroughly cleaned again with a vacuum and tack cloth before applying subsequent coats. Most hardwood floors benefit from at least two, often three, coats of finish for optimal durability and appearance. The video concludes with the first coat applied, indicating the start of the drying process and the need for subsequent steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_NU5cwh7UKE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11223-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7kJI8gMo7Io/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Light Sanding and Apply Subsequent Varnish Coats — Hardwood Floor Refinishing</video:title>
      <video:description>After the first coat has dried, a very light sanding with a fine-grit sanding screen or sandpaper (e.g., 150-220 grit) is often recommended to &apos;de-nib&apos; the surface, removing any raised grain or small imperfections. The floor is then thoroughly vacuumed and wiped again to remove all sanding dust. This is followed by applying the second coat of varnish in the same manner as the first. Most projects require 2-3 coats for optimal durability and a deep, rich finish, with similar light sanding and cleaning between each coat. The video shows the continuous application process, implying multiple coats are being applied.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7kJI8gMo7Io</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11223-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AcMm7Zw1P_0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second and Third Finish Coats — Hardwood Floor Refinishing</video:title>
      <video:description>After buffing and thoroughly vacuuming, apply the second coat of finish using the same techniques as the first (foam brush for corners, roller for main areas, working in small sections). Allow this coat to dry completely. For enhanced durability and protection, it is highly recommended to apply a third coat. If applying a third coat, repeat the intermediate buffing and vacuuming steps before applying the final layer of finish. Ensure sufficient drying time between all coats and after the final coat before allowing foot traffic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AcMm7Zw1P_0</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11224-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p7Q8mc6P7YU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Finish to Cure — Hardwood Floor Refinishing</video:title>
      <video:description>After applying the final coat of protective finish, allow the floor to cure completely. While the surface may feel dry to the touch within hours, full cure time can range from 24 hours to several days or even weeks, depending on the product and environmental conditions (humidity, temperature). Avoid heavy foot traffic, furniture placement, or rug laying until the finish has fully hardened to prevent impressions or damage. Consult the finish manufacturer&apos;s instructions for specific cure times.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p7Q8mc6P7YU</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11224-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pfjsI8HPKbE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Curing and Room Reset — Hardwood Floor Refinishing</video:title>
      <video:description>Once the final coat of wood floor finish has been applied, it&apos;s crucial to allow the floor sufficient time to fully cure. While the floor may be dry to the touch within a few hours (as shown by the glossy, dry appearance at the end of the video), it typically takes several days, often 24 to 72 hours, for the finish to achieve its full hardness and chemical resistance. During this curing period, avoid placing heavy furniture, rugs, or walking on the floor with shoes. The final appearance should be a uniform, glossy, and protective surface, as demonstrated at the end of the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pfjsI8HPKbE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11224-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kBdYPg_Tj68/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Cure — Hardwood Floor Refinishing</video:title>
      <video:description>Once the final coat of finish has been applied and is dry to the touch, conduct a final inspection of the floor to admire its restored beauty and protective sheen. While the floor may be dry to the touch, it is crucial to allow the finish to fully cure according to the manufacturer&apos;s recommendations (often several days to weeks) before placing furniture back or resuming heavy foot traffic to ensure maximum durability and prevent damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kBdYPg_Tj68</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11205-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6UgLy-sBr1o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Optimize Light Placement and Avoid Shadows — Bathroom Vanity Lighting</video:title>
      <video:description>Position the chosen vanity light fixture to provide effective, shadow-free illumination for grooming. A common rule of thumb for mounting is to place the light fixture between 36 and 48 inches off the top of the vanity countertop. This height range generally ensures the light hits the face directly and evenly, minimizing shadows. It is important to have the light source either directly on the mirror itself (if it&apos;s an integrated mirror light) or on the wall adjacent to the mirror. This &apos;front&apos; lighting strategy is crucial because relying solely on overhead lighting or lights placed behind the user can cast undesirable shadows on the face, making tasks like shaving or applying makeup difficult and less precise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6UgLy-sBr1o</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11205-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6UgLy-sBr1o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Optimal Light Height — Bathroom Vanity Lighting</video:title>
      <video:description>Before selecting a vanity light fixture, it is crucial to consider the height of the primary users. The ideal height for a vanity light ensures that it effectively illuminates the user&apos;s face without creating harsh shadows, accommodating both taller and shorter individuals. The goal is to choose a fixture or a mounting height that can be adjusted or is appropriate for the user&apos;s eye level to ensure it works well for them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6UgLy-sBr1o</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11205-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6UgLy-sBr1o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Fixture Type Based on Vanity Size — Bathroom Vanity Lighting</video:title>
      <video:description>Select the type of vanity light fixture that best suits the size and style of your bathroom vanity. For smaller vanities, sconce lights, which are individual fixtures typically mounted on either side of the mirror, are often a better choice as they can provide focused illumination without overwhelming the space. For larger vanities, a bar light, which is a single fixture featuring multiple bulbs that spans a wider area, is generally more appropriate. This type of light ensures a more even and comprehensive illumination across the broader surface of a large vanity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6UgLy-sBr1o</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11206-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JshQHe5f3UM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power at Breaker — Bathroom Vanity Lighting</video:title>
      <video:description>Before any work begins on the electrical fixture, locate the main electrical panel for the house. Identify the circuit breaker that controls the power to the bathroom vanity light. Flip the breaker to the &apos;off&apos; position to completely cut off electrical power to the fixture, ensuring safety during the removal and installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JshQHe5f3UM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11206-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6drj3i4TvkU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power at Circuit Breaker — Bathroom Vanity Lighting</video:title>
      <video:description>Locate your home&apos;s main circuit breaker panel. Find the breaker labeled for the bathroom lighting or the specific circuit you are working on. In the video, the label says &quot;Bathroom Lighting.&quot; Flip the identified circuit breaker to the &apos;OFF&apos; position to completely cut power to the switch box.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6drj3i4TvkU</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11206-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Kfnb6BaFksM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disable Power and Remove Old Fixture — Bathroom Vanity Lighting</video:title>
      <video:description>Locate the circuit breaker panel and identify the breaker controlling the bathroom light fixture. Flip the breaker to the &apos;off&apos; position. Return to the bathroom and use the light switch to confirm that the power to the fixture is indeed off. With the power confirmed off, proceed to unscrew and remove the old light fixture from the wall. The existing fixture is secured by Phillips head screws hidden behind decorative wooden buttons. Once the screws are removed, carefully detach the fixture, revealing the electrical box and wires behind it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Kfnb6BaFksM</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11207-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GSZX8lSlwOs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Light Fixture — Bathroom Vanity Lighting</video:title>
      <video:description>Begin by removing the light bulbs from the existing fixture. If the bulbs are hot, wear gloves for protection. Next, unscrew the retaining screws that hold the shades in place and carefully remove them. Then, remove the suspending screws or nuts from the outer portion of the fixture to detach it from the wall, exposing the electrical wiring inside the junction box. Use your voltage tester (Volt pin) to double-check that the power is indeed off before touching any wires. Carefully untwist and remove the wire nuts connecting the fixture&apos;s wires to the house wiring. Finally, use a screwdriver to remove the screws holding the wall bracket to the electrical box, and remove the bracket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GSZX8lSlwOs</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11207-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jLhA6ntQC84/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Light Fixture — Bathroom Vanity Lighting</video:title>
      <video:description>To remove the old light fixture, first carefully detach any decorative chrome pieces or rings that might be covering the bulb sockets. These usually twist or snap off. Once removed, locate and unscrew the Phillips head screws that secure the fixture&apos;s front casing. After the casing is removed, you will expose the electrical wiring. Disconnect the live (black), neutral (white), and ground (bare copper) wires by untwisting the wire nuts or unscrewing terminal connections. Finally, unscrew any remaining screws that hold the fixture&apos;s backplate directly to the wall to completely remove the old unit. Note that significant drywall damage behind the fixture may be revealed at this point, as was the case in the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jLhA6ntQC84</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11207-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SPC-6rxcPdo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Fixture Baseplate from Wall — Bathroom Vanity Lighting</video:title>
      <video:description>With all electrical connections disconnected, locate and unscrew the remaining screws that hold the old fixture&apos;s baseplate directly to the wall. As you remove the final screws, carefully support the fixture and pull it away from the wall, being mindful of the existing wiring bundle to avoid damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SPC-6rxcPdo</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11208-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GSZX8lSlwOs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Mounting Bracket — Bathroom Vanity Lighting</video:title>
      <video:description>Take the new wall bracket provided with your light fixture. Carefully slip the electrical wires from the wall&apos;s electrical box through the center opening of the new wall bracket. Position the bracket against the electrical box and secure it firmly using the supplied screws. Once the bracket is attached, use a level to ensure it is perfectly horizontal before fully tightening the screws. This ensures your new fixture will hang straight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GSZX8lSlwOs</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11208-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aBE32U08k-o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Mounting Plate — Bathroom Vanity Lighting</video:title>
      <video:description>Take the new light fixture&apos;s mounting plate (the silver part shown in the video) and align it with the electrical box on the wall. The presenter used a pencil to mark the screw holes, though they note it might not always be necessary if the holes align perfectly. Using a power drill, secure the mounting plate to the wall, starting with a middle screw and then adding the screws on each side. Ensure the plate is firmly attached and level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aBE32U08k-o</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11208-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XF4NdfyiDSc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Mounting Bracket — Bathroom Vanity Lighting</video:title>
      <video:description>After removing the old fixture, use a screwdriver to detach the old mounting bracket from the ceiling junction box. Take the new mounting bracket and thread the house wires through its center opening. Secure the new mounting bracket tightly to the junction box using the provided screws. Ensure it is firmly in place as it will support the new light fixture. A helpful tip is to check the weight capacity of your existing junction box; most can hold up to 50 pounds, but heavier fixtures may require replacing the box with a sturdier one.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XF4NdfyiDSc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11209-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0XF1eb5Bnzg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire the New Light Fixture — Bathroom Vanity Lighting</video:title>
      <video:description>With the mounting bracket securely installed, you can now connect the new light fixture&apos;s electrical wires to the house wiring. Using your wire strippers, ensure that both the fixture&apos;s wires and the house&apos;s wires have about 1/4 to 1/2 inch of exposed metal at their ends. Twist the corresponding wires together: white to white (neutral), black to black (hot), and the bare copper (ground) wire from the fixture to the green ground screw on the mounting bracket (or directly to the house ground wire if available). Secure each twisted pair with a wire cap by twisting it clockwise until tight. For added security, you can optionally wrap each wire cap and connection with electrical tape, as demonstrated in the video. Ensure all connections are firm and no bare wire is exposed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0XF1eb5Bnzg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11209-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3rvoMOYlYdY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire Connections and Bracket Installation — Bathroom Vanity Lighting</video:title>
      <video:description>Match the wires from the new fixture to the corresponding house wires by color: white to white (neutral), black to black (hot), and the bare copper wire to the ground wire. Twist the matching wires together securely. If your old wire caps are damaged or you don&apos;t have enough, ensure you acquire new ones. Twist a wire cap onto each set of twisted wires, making sure it&apos;s tight and secure. Once all connections are made, carefully push the connected wires and wire caps neatly into the electrical box in the wall. Then, securely fasten the new mounting bracket to the electrical box using two screws, tightening them with a drill or screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3rvoMOYlYdY</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11209-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iiT8U30GhKw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire the Light Fixture — Bathroom Vanity Lighting</video:title>
      <video:description>Before making any connections, ensure the power to the circuit is off at the breaker. Take the bare copper ground wire from the wall, the bare copper ground wire from the light fixture, and a short pigtail bare copper wire (if one is provided or if you cut one from scrap). Twist these three together, secure them with a wire nut, and then connect the remaining end of the pigtail to the green ground screw on the mounting bracket. This ensures the entire fixture is properly grounded. Next, connect the white (neutral) wire from the wall to the white (neutral) wire from the light fixture, twisting them together and securing them with a wire nut. Finally, connect the black (hot) wire from the wall to the black (hot) wire from the light fixture, twisting and securing with a wire nut. Neatly tuck all connected wires into the electrical box, ensuring they are not pinched or exposed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iiT8U30GhKw</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11210-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0XF1eb5Bnzg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount and Secure New Light Fixture — Bathroom Vanity Lighting</video:title>
      <video:description>Once the wiring is complete and neatly tucked into the wall box, align the new light fixture&apos;s base with the mounting bolts extending from the circular mounting bracket. Slide the fixture onto these bolts. The circular bracket allows for slight rotation, so you can twist the fixture to ensure it&apos;s perfectly level or in your desired orientation. Once aligned, tighten the decorative nuts onto the mounting bolts to secure the light fixture firmly against the wall. Double-check that it is snug and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0XF1eb5Bnzg</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11210-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3rvoMOYlYdY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount New Fixture and Level — Bathroom Vanity Lighting</video:title>
      <video:description>Take the new light fixture and align its mounting holes with the threaded posts on the installed bracket. Carefully push the fixture onto these posts. Secure the fixture by screwing and tightening the finishing nuts (often decorative bolts or caps) onto the threaded posts. As you tighten these nuts, continuously use a level to ensure the entire light fixture is perfectly horizontal. Adjust as needed until the fixture is level and securely fastened to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3rvoMOYlYdY</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11210-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/D9CrDsPcSjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount New Light Fixture — Bathroom Vanity Lighting</video:title>
      <video:description>Carefully tuck all connected wires into the electrical box in the wall, ensuring no wires are bunched up behind the fixture&apos;s backplate, as this will prevent it from sitting flush. Align the new light fixture with the mounting block and secure it using the thumb screws that came with the new fixture. Test if the light fixture is tight. If the thumb screws bottom out before the fixture is tight, adjustments to the mounting block may be necessary. The presenter finds that no adjustments are needed in this case, indicating a good flush fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/D9CrDsPcSjU</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11211-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fNpW_B5vde8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Light Bulbs and Test — Bathroom Vanity Lighting</video:title>
      <video:description>Install the appropriate light bulbs into the fixture&apos;s sockets. Turn the power back on at the circuit breaker. Test the light fixture to ensure it functions correctly by flipping the light switch. The fixture should illuminate as expected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fNpW_B5vde8</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11211-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pE8f6Hj8s6o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test the New Fixtures — Bathroom Vanity Lighting</video:title>
      <video:description>Once the new lighting fixture is fully installed and secured, return to the circuit breaker panel. Flip the circuit breaker back to the &apos;on&apos; position to restore power. Activate the light switch for the fixture to confirm it is working correctly. Enjoy your new lighting!</video:description>
      <video:player_loc>https://www.youtube.com/embed/pE8f6Hj8s6o</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11211-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XN_7LC8j2-s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Bulbs and Restore Power — Bathroom Vanity Lighting</video:title>
      <video:description>With the new fixture securely mounted, screw in the new light bulbs into the sockets. Depending on your fixture, you may also need to attach the light bulb cover. Once the fixture is fully assembled, return to your electrical panel and flip the circuit breaker back to the &apos;ON&apos; position to restore power. Test your new light fixture to ensure it works correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XN_7LC8j2-s</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11212-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0XF1eb5Bnzg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Assembly and Testing — Bathroom Vanity Lighting</video:title>
      <video:description>For this particular light fixture, first ensure the light sockets are screwed down tightly into their base. Next, remove the outer retaining rings from each socket (these typically screw off counter-clockwise). Slide the glass flanges or shades over each socket. Screw the retaining rings back on clockwise to secure the glass shades. Finally, screw in the new LED light bulbs (like the Ecosmart brand shown) into each socket. Once all components are assembled, return to your main electrical breaker panel and flip the breaker back on. Test the light fixture by turning on the wall switch to ensure everything is working correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0XF1eb5Bnzg</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11212-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SPC-6rxcPdo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure New Fixture and Install Bulbs/Shades — Bathroom Vanity Lighting</video:title>
      <video:description>Once all electrical connections are secure, carefully push the connected wires back into the electrical box in the wall, making sure they are not pinched or damaged. Align the new fixture&apos;s faceplate with the mounted baseplate and secure it using the decorative nuts that were set aside earlier. Finally, install the light bulbs into their sockets and attach any glass shades or covers to complete the assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SPC-6rxcPdo</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11212-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xz_LFKGCayM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Shades and Install Bulbs — Bathroom Vanity Lighting</video:title>
      <video:description>For the final assembly, attach the glass shades onto the fixture by screwing on the socket rings. Ensure the shades are snug but not overtightened to prevent cracking. Afterward, screw the light bulbs into the sockets. The bulbs are typically not included with the fixture and must be purchased separately. Once the bulbs are in place, the installation is complete, and you can restore power to the circuit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xz_LFKGCayM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11203-1</loc>
    <lastmod>2026-10-26T20:53:01.900Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9iOsbprpe5g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Cove Molding — Stair Tread Installation</video:title>
      <video:description>To add a final decorative touch and conceal any minor gaps between the tread and riser, cove molding is installed along the underside of the new nosing. Begin by measuring the exact length required for each section of cove molding. Cut the cove molding to these measured lengths using a miter saw, ensuring precise cuts for a tight fit. Before permanent attachment, dry fit each piece of molding to confirm it flexes and fits well against any irregularities of the old riser. This separate installation of cove molding is advantageous as its inherent flexibility allows it to conform to slight imperfections along the old riser, achieving a seamless and polished look. Once satisfied with the fit, secure the cove molding in place using an 18-gauge finish nail gun.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9iOsbprpe5g</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-26T20:53:01.900Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11203-2</loc>
    <lastmod>2026-10-26T20:53:01.900Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/npflGAuaSzQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Glue and Nail Cove Molding — Stair Tread Installation</video:title>
      <video:description>Attach the cove molding to the bottom base of the newel post. This section is often easier to attach as the base itself provides a natural shelf for the molding to rest on. Apply a continuous bead of wood glue to the back of the cove molding. Carefully align the molding piece, ensuring it sits flush and creates a clean, finished transition. Secure the cove molding in place using a brad nailer. Look at the joints from above to make sure they are perfectly lined up, as this is the perspective from which they will be most visible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/npflGAuaSzQ</video:player_loc>
      <video:duration>3092</video:duration>
      <video:publication_date>2026-10-26T20:53:01.900Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11203-3</loc>
    <lastmod>2026-10-26T20:53:01.900Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KuQy46qkETQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Wainscoting Cove Molding — Stair Tread Installation</video:title>
      <video:description>The final piece of trim for this section of the wainscoting is the cove molding, which is installed directly beneath the 1x2 cap. The installer measures the required length for the cove molding, accounting for the mitered corner from the previous installation. He then cuts the cove molding to the precise length using a miter saw. The cove molding is carefully placed beneath the cap and secured with an 18-gauge brad nailer, creating a decorative and finished look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KuQy46qkETQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-26T20:53:01.900Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11202-1</loc>
    <lastmod>2026-10-26T20:53:01.900Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — Stair Tread Installation</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-10-26T20:53:01.900Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11202-2</loc>
    <lastmod>2026-10-26T20:53:01.900Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-26T20:53:01.900Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11202-3</loc>
    <lastmod>2026-10-26T20:53:01.900Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-26T20:53:01.900Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11204-1</loc>
    <lastmod>2026-10-26T20:53:01.900Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Stair Tread Installation</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-26T20:53:01.900Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11204-2</loc>
    <lastmod>2026-10-26T20:53:01.900Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-26T20:53:01.900Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11204-3</loc>
    <lastmod>2026-10-26T20:53:01.900Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the First Tread — Stair Tread Installation</video:title>
      <video:description>Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-26T20:53:01.900Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11197-1</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — Stair Tread Installation</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11197-2</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Installation</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11197-3</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Stair Tread Installation</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11199-1</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Treads to Size — Stair Tread Installation</video:title>
      <video:description>Once measurements are taken and marked on the stair treads, use a miter saw to precisely cut them to the required width and depth. Ensure that the cuts are straight and clean for a professional finish. If the treads have a carpeted or fabric surface, you may need a sharp utility knife to score or cut through that material first, or ensure your saw blade is specifically designed for such materials to cut cleanly without fraying.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11199-2</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Stair Tread Installation</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11199-3</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dLwqNHREkrQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet — Stair Tread Installation</video:title>
      <video:description>A large piece of carpet is rolled out on the floor. The width of each stair step is carefully measured using a tape measure. A straight edge is then aligned with the measurement, and a utility knife is used to precisely cut the carpet to the required size for each step. This ensures that each carpet piece fits snugly across the width of its respective stair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dLwqNHREkrQ</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11198-1</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CtnOYw-UEDw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select, Order, and Unpack Custom Stair Treads — Stair Tread Installation</video:title>
      <video:description>Recognizing the limitation of traditional stair runners for a floating staircase, the homeowner identifies &quot;Oak Valley Designs&quot; as a specialist in custom stair treads. They review various fabric options, including different patterns and textures, as shown through samples. Once selected, the custom treads are received and unboxed, revealing the chosen design (a dark pattern with white and brown accents) and individual protective plastic wrapping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CtnOYw-UEDw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11198-2</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8QEPVE5-M8c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Key Material Selection Factors — Stair Tread Installation</video:title>
      <video:description>Beyond initial preferences, material selection must consider several critical factors: aesthetics (how it looks), durability (how long it lasts), maintenance (how easy it is to care for), and the specific use or functionality of that material within the space. These factors are crucial for making informed decisions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8QEPVE5-M8c</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11198-3</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Acquire and Prepare Carpet Treads — Stair Tread Installation</video:title>
      <video:description>Select pre-made carpet stair treads that fit your measurements, or choose a carpet remnant and cut it to the desired dimensions. If cutting, use a sharp utility knife and a straight edge to ensure clean, precise cuts. If your chosen treads do not have an integrated non-slip backing, you may need to apply a non-slip rug pad or spray-on rubberized coating to the back of each tread. For permanent installation, prepare your chosen adhesive: either heavy-duty double-sided carpet tape or a strong construction adhesive (e.g., liquid nails). If using tape, apply strips to the backing of the treads or directly to the stairs. If using construction adhesive, apply a thin bead along the perimeter and center of the underside of each tread. The video shows gray carpet treads, likely pre-made or custom-cut, already prepared and installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11200-1</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Smooth Stairs — Stair Tread Installation</video:title>
      <video:description>Before starting the installation, ensure that the existing stairs are thoroughly cleaned and smoothed. Use a broom to remove any dust, debris, or loose particles from the risers and treads. A clean and smooth surface is essential for proper adhesion and a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11200-2</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stair Surface — Stair Tread Installation</video:title>
      <video:description>Although not explicitly demonstrated in the video, it is crucial to ensure the staircase is clean before installing the treads. Thoroughly clean each wooden stair surface to remove any dust, dirt, pet hair, or debris. This preparation ensures optimal adhesion of the non-slip backing, preventing the treads from shifting and maintaining a neat appearance. Use a vacuum cleaner for loose particles, followed by a damp cloth and a mild cleaner if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11200-3</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Stair Tread Installation</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11201-1</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11201-2</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11201-3</loc>
    <lastmod>2026-11-19T19:36:06.358Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Treads — Stair Tread Installation</video:title>
      <video:description>Starting from the bottom step of the staircase, carefully align the first prepared stair tread onto the wooden step. Ensure the tread is centered, positioned straight, and covers the desired area of the step. Once satisfied with the placement, firmly press the tread down across its entire surface, paying close attention to the edges and corners, to securely bond the adhesive to the wood. The installer in the video kneels and crawls up the stairs, applying significant body weight to ensure good contact. Repeat this alignment and pressing process for all remaining stairs, working your way up the staircase one tread at a time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-19T19:36:06.358Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11187-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ij8dmeG-l2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan the Deck Layout and Consult Building Codes — Decking and Railing Installation</video:title>
      <video:description>Begin the deck planning process by drawing the desired shape and proportion of the deck. Crucially, determine the orientation of the decking, as this will influence joist placement. Always refer to relevant building codes and guides, such as the &apos;Prescriptive Residential Wood Deck Construction Guide&apos; (DCA 6), to ensure compliance and structural soundness. This initial planning helps to accurately determine material needs and proper spacing for all structural components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ij8dmeG-l2U</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11187-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4W7PpUYPT0s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Research and Plan the Deck — Decking and Railing Installation</video:title>
      <video:description>Begin by conducting thorough research and planning for your deck project. Consult resources such as the &quot;Ultimate Guide to Decks: Plan / Design / Build&quot; book for general knowledge and specialized websites like decks.com for free design plans, design tools, and material cost calculators. The presenter also highly recommends watching instructional videos on YouTube to gather practical tips and skills. Once sufficient information is gathered, sketch out your deck plan on quad-ruled notebook paper, detailing the placement of every board, beam, and connection. This detailed drawing will help in creating a comprehensive materials list.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4W7PpUYPT0s</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11187-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Sw6YJOcVWk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Design and Planning — Decking and Railing Installation</video:title>
      <video:description>Before starting any physical work, it is crucial to design your deck. This design must comply with the NZS 3604 building code. You&apos;ll need to create a detailed plan, which can be done by yourself (referencing guides if needed) or by hiring a licensed building practitioner or an engineer. Additionally, check council plans for the location of pipes and contact your local electricity provider to identify any underground wires that might not be on the plans, to avoid hitting them during construction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Sw6YJOcVWk</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11188-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jk8Tt_Eyumk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dig Footing Holes and Set Forms — Decking and Railing Installation</video:title>
      <video:description>Using a Ryobi post-hole auger, dig multiple holes in the designated locations for the deck footings. The creator faces initial difficulties due to tree roots in the ground, requiring persistence. After successfully digging the holes, yellow Sonotube concrete forms are placed into each hole, ensuring they extend above ground level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jk8Tt_Eyumk</video:player_loc>
      <video:duration>165</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11188-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wTrFpW7onJY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Dig Footing Holes — Decking and Railing Installation</video:title>
      <video:description>After clearing the area, the crew marks the locations for the new deck footings. They use spray paint to outline circular areas for the footings, measuring with a tape measure. Post hole diggers and a digging bar are used to excavate deep holes. The video emphasizes that the footings must be at least 3 feet deep and 12 inches wide, requiring digging through existing shale. Sonotubes (cardboard concrete forms) are then placed into these excavated holes, ensuring they are level with a spirit level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wTrFpW7onJY</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11188-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XtRdyoX-cqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Layout and Digging Footings — Decking and Railing Installation</video:title>
      <video:description>Using a tape measure, accurately mark out the perimeter of the planned deck and the locations for the footings. Drive stakes into the ground at these marked points to create a visual guide. Then, use a compact excavator (mini excavator) with a 25-inch bucket to dig the footing holes. The holes should be 36 inches deep and 25 inches wide to accommodate the Sonotube concrete forms. Clean up the edges of the holes with a shovel to ensure a comfortable fit for the Sonotubes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XtRdyoX-cqQ</video:player_loc>
      <video:duration>193</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11189-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jk8Tt_Eyumk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pour Concrete Footings and Install Anchors — Decking and Railing Installation</video:title>
      <video:description>After placing the Sonotube forms, rocks are added to the bottom of each hole to ensure proper drainage and prevent water buildup. Next, bags of Quikrete 5000 concrete mix are prepared. The dry mix is poured into a large tub, followed by the addition of water. The concrete is thoroughly mixed with a shovel until a consistent, workable consistency is achieved. The mixed concrete is then shoveled into each Sonotube form, ensuring it fills the form completely. Finally, a post base anchor is inserted into the wet concrete at the top of each footing, carefully leveled using a spirit level, and secured in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jk8Tt_Eyumk</video:player_loc>
      <video:duration>166</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11189-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XIrHlJltt4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pour and Finish Concrete Footings — Decking and Railing Installation</video:title>
      <video:description>Mix concrete according to manufacturer instructions, if not using pre-mixed concrete. Carefully pour the concrete into each Sonotube, filling it to the desired level, which is typically flush with the top of the Sonotube. As you pour, gently agitate the concrete with a shovel or piece of rebar to release any trapped air bubbles, ensuring a dense, strong footing. Once filled, use a straight edge or trowel to level and smooth the top surface of the concrete, ensuring it&apos;s flat and ready for post bases. Allow the concrete to cure fully according to the manufacturer&apos;s instructions, typically several days to a week, before placing any load on it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XIrHlJltt4M</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11189-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SUxS4QJpeiU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pour Concrete Footings — Decking and Railing Installation</video:title>
      <video:description>Mix concrete according to the manufacturer&apos;s directions, typically in a wheelbarrow. Fill each form tube approximately halfway with the mixed concrete. Use a shovel or a 2x4 to &apos;vibrate&apos; the concrete and remove any trapped air pockets, which helps prevent voids and ensures strength. Then, fill the remainder of the tube with concrete, leaving the top surface smooth. Carefully embed an anchor bolt into the wet concrete, ensuring it&apos;s plumb and no more than an inch of its thread is showing. Backfill around the form tubes with gravel to provide stability and keep them in place while the concrete cures. Allow the concrete to cure fully according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SUxS4QJpeiU</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11190-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SUxS4QJpeiU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Cut Posts to Height — Decking and Railing Installation</video:title>
      <video:description>Carefully place the wooden posts onto the installed post brackets. Use a level (like a post level) to ensure each post is perfectly plumb (vertical). Secure the posts to the brackets using 10-penny nails or structural screws, driving them through the pre-drilled holes in the brackets and into the posts. Next, mark the top of each post by first holding a chalk line at the desired deck height mark on the house. Extend this chalk line to each post, using a string level (like a SWANSON level) to ensure it&apos;s perfectly level, then snap the line onto each post. Finally, cut the posts along the snapped line using a reciprocating saw or circular saw to achieve uniform height.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SUxS4QJpeiU</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11190-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eiZoCH5SMPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Deck Posts — Decking and Railing Installation</video:title>
      <video:description>Once the concrete footings are cured, measure and cut 6x6 pressure-treated posts to the exact height required to meet the deck frame at the desired level, with a slight pitch away from the house for drainage. Place the cut posts into the post bases and use a level to ensure they are plumb. Fasten the posts to the post bases according to the manufacturer&apos;s instructions, typically using specialized fasteners or nails.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eiZoCH5SMPI</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11190-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PkvKO8GchyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Set Deck Posts — Decking and Railing Installation</video:title>
      <video:description>Attach the metal post anchors to the bolts embedded in the concrete footings. Once the post anchors are securely in place, you need to determine the precise height of each wooden post. First, make a mark on the house wall indicating the desired finished height of the deck. From this mark, subtract the combined thickness of the deck board, the beam, and the joist (e.g., for 2x8 beams and joists, this might be 15.5 inches). Transfer this calculated height to a stake next to the house footing. Then, run a level string line from this stake across the deck area to the outer footings. Adjust the outer string to be 0.5 inches lower than the string at the house, creating a slight slope for rain runoff. Now, measure the distance from the bottom of each post anchor to the level string line. This measurement will give you the exact height for each individual post. Cut your 6x6 posts to these exact lengths. If using a 10-inch miter saw for 6x6 posts, you&apos;ll need to rotate the post to cut all the way through. Finally, set each cut post into its corresponding metal post anchor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PkvKO8GchyE</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11191-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PkvKO8GchyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Secure Beams — Decking and Railing Installation</video:title>
      <video:description>Construct the main support beams for the deck. The video demonstrates creating beams by nailing two 2x8 pieces of lumber together. Use four 10-penny galvanized nails every 16 inches, staggering them, to firmly join the two boards. Once the beams are assembled, place them on top of the installed posts. Use metal brackets (such as post-to-beam connectors) to secure the beams to the posts. Before fully securing, use a tape measure to double-check the diagonal measurements of the beam layout. This ensures that your beams are perfectly square. Once confirmed, nail the metal brackets to both the posts and the beams, ensuring every pre-drilled hole in the brackets is filled with a nail for maximum stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PkvKO8GchyE</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11191-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J2qGcDc9f_s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Double-Ply Beams — Decking and Railing Installation</video:title>
      <video:description>Position the second plank of the double-ply beam onto the notched posts, carefully aligning it with the first installed plank and the marked beam line. Once aligned, secure the two planks together and to the posts using 0.5-inch structural bolts. Drive the bolts through the beam and post, and then secure them with washers and nuts. While securing, use a level to ensure that the beam remains perfectly level and the post remains plumb (vertically straight) to maintain the structural integrity and aesthetic of the deck frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J2qGcDc9f_s</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11191-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ij8dmeG-l2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Build Beams and Secure Post Connections — Decking and Railing Installation</video:title>
      <video:description>Construct the deck beams by laminating multiple pieces of 2x dimensional lumber together. Apply construction adhesive in a zigzag pattern between each layer of lumber. Use clamps, such as DeWalt clamps, to securely hold the boards together while you fasten them. Nail the boards together from both sides using a pneumatic nailer with appropriate fasteners. Ensure all seams are staggered and supported by a post. For the post-to-beam connection, instead of simply bolting the beam to the side of the post, create a notch in the post to provide direct support for the beam. Secure the beam to the notched post using specialized screw bolts designed for this connection. For posts embedded in concrete footings, attach a post base to the concrete, then secure the post to the base using a pneumatic nailer with the manufacturer&apos;s specified fasteners.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ij8dmeG-l2U</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11192-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SUxS4QJpeiU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Joists, Bracing, and Hangers — Decking and Railing Installation</video:title>
      <video:description>After installing the initial rim joists, attach reinforcing brackets (joist hangers) where the joists connect to the beams. Use deck nails or screws to secure these brackets firmly. If your deck requires it, add bracing in the middle of the frame to support parting deck boards or for additional rigidity. These can be short pieces of joist material nailed in between the main joists. Position the entire floor frame onto the support beams, ensuring it is square with the house and level. Secure the frame to the beams using rafter ties for robust connection. If you have two-piece rim joists, you can assemble the frame in halves and then join them. Then, hold each floor joist along the 16-inch on-center lines, flush with the top of the rim joists, and drive in screws to secure them. Attach joist hangers against each joist, tapping in the prongs to seat them, wrapping them tightly underneath and against the other side of the beam, and then securing them with joist hanger nails or structural screws. Install the remaining joists following the same method.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SUxS4QJpeiU</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11192-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XtRdyoX-cqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing Floor Joists and Blocking — Decking and Railing Installation</video:title>
      <video:description>Position the 2x10 pressure-treated floor joists into the installed joist hangers on the ledger board, running perpendicular to the house and resting on the main support beam. Secure the joists to the hangers using 3-inch exterior-grade nails. At the main beam, back-nail the joists by driving nails or screws through the side of the joist into the beam for added lateral stability. The main beam is designed to handle the vertical load, so no hangers are needed on this side. Once joists are installed, cut and fit blocking between them along the perimeter of the deck. This blocking provides a solid attachment point for the perimeter decking boards and prevents lateral movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XtRdyoX-cqQ</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11192-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PkvKO8GchyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Joists and Blocking — Decking and Railing Installation</video:title>
      <video:description>Begin installing the deck joists by marking their positions on the beams, typically every 16 inches on center. Place the first joist flush against the house. Secure joists to the beams using toe-nailing (driving nails at an angle) for initial placement. Install metal hurricane brackets (joist hangers) for structural support, ensuring all available holes in the brackets are filled with nails. For decks wider than the available lumber lengths (e.g., a 20-foot deck with 16-foot joists), you will need to support two separate joists on the center beam. Next, improve the rigidity of the joist system by adding blocking between joists along the center beam. Cut pieces of lumber to fit snugly between the joists and nail them in place. Finally, use a circular saw to trim the ends of the joists to a straight, square line. This prepares the frame for the rim joists and ensures a clean edge for the decking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PkvKO8GchyE</video:player_loc>
      <video:duration>85</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11193-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nRBgIe-ApTU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Decking Boards — Decking and Railing Installation</video:title>
      <video:description>Start installing the decking boards beginning with the board closest to the house. Position the straightest decking board flush with the rim joist. Drill pilot holes approximately 1 inch from the edge into the rim joist, then drive decking screws to secure it. For subsequent boards, pull each board tight against the previously installed board before securing it with two screws into each joist. If your deck is wide, install parting deck boards in the middle, ensuring you add extra bracing underneath to support them. As you progress, notch the decking around posts or other obstructions using a jigsaw. Periodically check for squareness every few boards to maintain alignment. When nearing the end, dry-lay the remaining boards to determine the width of the last board. If the last board would be too skinny, you can rip a small amount off the last few boards to evenly adjust the width. Use a router to round over the edges of any ripped boards for a finished look, including the edges of decking boards around the parting boards. Once all decking is secured, snap a chalk line allowing a 1-1/4 inch overhang along the perimeter, and use a circular saw to cut off any excess decking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nRBgIe-ApTU</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11193-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PkvKO8GchyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Decking Boards — Decking and Railing Installation</video:title>
      <video:description>Install the decking boards, starting from the house and working your way outward. Before fastening, pre-drill and countersink all holes near the edges of the boards to prevent the wood from splitting. Then, secure the deck boards by driving two exterior-grade screws into each joist they cross, typically every 16 inches. As you lay the boards, periodically stop (e.g., every fourth board) and measure the width of the installed decking near the house and at the far end of the deck. This helps ensure that your deck boards are remaining square and parallel as you progress. If working with wet, pressure-treated lumber, push the boards snugly against each other. They will shrink slightly as they dry, naturally forming small gaps for drainage. If using dry boards, you&apos;ll need to intentionally add an 1/8-inch gap between each board as you install them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PkvKO8GchyE</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11193-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Sw6YJOcVWk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Decking Boards — Decking and Railing Installation</video:title>
      <video:description>Begin laying the decking boards. Start at one end, ensuring the first board is positioned correctly (e.g., half on the joist) and its end is cut square. Use a chalk line as a guide to ensure subsequent boards are laid straight. Before driving screws, always pre-drill the decking boards to prevent splitting, especially near the ends. Use stainless steel decking screws (e.g., 75mm screws for 32mm thick decking, or 65mm for 20mm thick decking), driving two screws per joist. Leave the ends of the decking boards long for now; they will be trimmed later. To maintain consistent spacing between boards, insert a nail (e.g., a 3mm nail) between each board as you lay them, then remove it once the board is screwed down.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Sw6YJOcVWk</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11194-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PkvKO8GchyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Build and Install Railing Posts — Decking and Railing Installation</video:title>
      <video:description>Begin by preparing the posts for the railings. Railing construction is subject to strict building codes, particularly concerning height, attachment methods, and baluster spacing. Always confirm these requirements with your local inspector. To create a clean look, cut a decorative notch into the railing posts where the horizontal rails will sit. Use a circular saw with the blade set to 1.5 inches deep to make several parallel relief cuts within the notch area. Break out the waste wood with a hammer, then clean and refine the notch using a chisel and a block plane for a smooth finish. Once notches are complete and posts are cut to the required height (with a 45-degree bevel on top for aesthetics), lay out their positions along the deck perimeter, ensuring they meet minimum spacing codes. Drill pilot holes for carriage bolts, checking that each post is plumb and square before drilling the second hole. Insert carriage bolts, with washers and nuts, and tighten them down with a wrench to secure the posts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PkvKO8GchyE</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11194-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JPd3veDYbiY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Railing Posts — Decking and Railing Installation</video:title>
      <video:description>Railing installation is a critical safety component. Most building codes require railings for decks over 24 inches in height, and these railings typically need to be at least 42 inches high. For railing posts, use 4x4 lumber, centering them on six-foot spans or less, depending on the length of the deck. Position posts between the joists. Box in the posts within the deck framing, using the rim joist as the front support and adding blocking to support the back and sides if required. Ensure blocking dimensions match the joists for structural integrity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JPd3veDYbiY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11194-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H_4BLKcum0Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Deck Railing Support Posts — Decking and Railing Installation</video:title>
      <video:description>Begin by installing the 4x4 posts that will support the railings. These posts should extend 36 inches above the finished deck surface to meet typical local building codes; always verify your specific local requirements. Position each post against the rim joist. Drill pilot holes through the rim joist and the 4x4 post, then secure them with 1/2-inch through-bolts, hammering them in from the outside for a clean appearance. On the inside of the deck, tighten the nuts onto the through-bolts using an impact driver. For additional strength, especially for posts running parallel to the joists, use two deck tension ties (such as Simpson Strong-Tie brand) to connect the post to the deck joists, securing them with screws using an impact driver. This ensures the posts are as strong as the rest of the deck structure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H_4BLKcum0Y</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11195-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wF9tnCypflY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Top and Bottom Rails — Decking and Railing Installation</video:title>
      <video:description>Now, prepare and install the top and bottom rails that will run horizontally between the posts. First, measure the distance between the installed posts to determine the length needed for these rails. Use a miter saw to cut the rail pieces to size. To ensure even installation, use small wood blocks as spacers to set the desired height for the bottom rail. Nail the bottom rail in place first, then attach the top rail, making sure it is flush with the top of the posts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wF9tnCypflY</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11195-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c84wb8Z660c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Top and Bottom Rails — Decking and Railing Installation</video:title>
      <video:description>Measure the exact distance between each installed rail post. Cut 2x4 lumber to create your top and bottom rails, ensuring they fit snugly between the posts. When installing the bottom rail, allow for a 3 1/2-inch sweep space between the bottom edge of the rail and the deck surface. Attach each end of the rails to the posts using four 3 1/2-inch trim screws, driven in diagonally for enhanced strength and stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c84wb8Z660c</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11195-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SjlGzmhPWtw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Horizontal Rails for Spindles — Decking and Railing Installation</video:title>
      <video:description>Install the horizontal 2x4 rails that will hold the vertical spindles. These rails should be placed flush with the inside of the deck posts, both at the top and the bottom. To maintain a consistent height of 3.5 inches between the deck surface and the bottom rail, use a scrap piece of 4x4 lumber as a temporary spacer during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SjlGzmhPWtw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11196-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hh74rKgJS0w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Bottom Rail and Balusters — Decking and Railing Installation</video:title>
      <video:description>Next, secure the prepared bottom wooden rail to the deck posts. Use a cordless drill/driver to fasten the rail to the posts using exterior-grade screws. Make sure the rail is level and positioned at the desired height from the deck surface, typically allowing for proper baluster length and code compliance. Once the bottom rail is firmly in place, begin inserting the pre-cut metal balusters into the drilled holes in the bottom rail. Ensure they are seated properly and spaced correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hh74rKgJS0w</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11196-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wF9tnCypflY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Balusters — Decking and Railing Installation</video:title>
      <video:description>Next, you&apos;ll install the balusters, which are the vertical pieces between the top and bottom rails. These are typically made from 2x2 lumber and can be bought pre-cut. The number of balusters and their spacing depend on the size of the balusters and the distance between your posts. Code generally requires a gap of no more than 4 inches for safety. Once you&apos;ve determined your spacing, mark the locations on the rails, and then nail the balusters to both the top and bottom railings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wF9tnCypflY</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11196-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kQAAPKwzPl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Balusters and Rails — Decking and Railing Installation</video:title>
      <video:description>The balusters are assembled into sections with the top and bottom rails. Nathan explains that code recommends a maximum spacing of 4 inches between balusters. They lay out the balusters and rails on a workbench, ensuring correct spacing (4 inches, with 3 3/4 inches at each end for even distribution). They pre-drill holes through the rails and into the balusters, then secure them with stainless steel screws using a cordless drill.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kQAAPKwzPl8</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11180-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5Xzd0BanudA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Create Blueprint — Bathroom Storage Solutions</video:title>
      <video:description>Before starting any demolition, accurately measure and plan your kitchen layout. Use a tape measure to record the dimensions of all walls, noting the placement and size of doors and windows, measuring to the outside of any molding. Also, measure from the floor to the bottom of windows, the height of windows, and from the top of windows to the ceiling. Make sure to sketch these measurements and also indicate the locations of plumbing, gas lines, and electrical outlets on your blueprint. This detailed plan will guide your cabinet selection and installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5Xzd0BanudA</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11180-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8NkMuycFsGg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Layout Fixtures and Clearances — Bathroom Storage Solutions</video:title>
      <video:description>To effectively plan the layout, use a 4x8 foot foam board (or similar material representing your floor plan) to draw out the bathroom&apos;s dimensions and the placement of fixtures. For this project, a 4x8 foot space is used. Begin by marking the shower area, making it a 3-foot width from the existing wall. Then, mark the center of the toilet&apos;s rough-in, typically 12 inches from the back wall and 15 inches from the edge of the adjacent fixture (or 18 inches for more comfortable elbow room, especially for accessibility). The toilet will protrude approximately 26 inches from the wall, requiring a minimum of 21 inches of clear space in front. Next, mark the vanity area, which for this layout will be a free-standing unit with its center aligned with necessary plumbing. The vanity should extend about 24 inches from the wall. Ensure all clearances comply with NKBA (National Kitchen + Bath Association) standards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8NkMuycFsGg</video:player_loc>
      <video:duration>6691</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11180-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ErqVNRLOoZE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Cabinet Layout — Bathroom Storage Solutions</video:title>
      <video:description>The first step involves accurately measuring the desired location for the cabinets on the wall. Use a tape measure to determine the height and width of the cabinet area. Then, use a level and a pencil to mark horizontal and vertical lines on the wall, establishing the boundaries and guides for the initial wooden frame that will support the cabinets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ErqVNRLOoZE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11181-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YmLE81WsfeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>DIY Enclosed Storage Unit — Bathroom Storage Solutions</video:title>
      <video:description>If you possess DIY skills and seek a stylish storage solution, construct and affix a DIY enclosed storage unit to the wall. This unit typically features multiple shelves enclosed by a door, allowing you to store a variety of items out of sight, maintaining a clean and uncluttered look. It is crucial to be mindful of the unit&apos;s depth during construction to ensure it does not protrude excessively into the bathroom, which could reduce available space or create an obstruction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YmLE81WsfeQ</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11181-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YmLE81WsfeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tall, Narrow Cabinets — Bathroom Storage Solutions</video:title>
      <video:description>To address limited floor space in a small bathroom, select tall and narrow cabinets or shelving units. These types of units are specifically designed to fit into tight spaces, such as alongside a bathtub or underneath a bathroom sink, and can be used to store a variety of items. They offer vertical storage, making them an efficient choice when horizontal space is at a premium. These can be purchased ready-made from stores like IKEA, as shown in the video, or custom-built to perfectly fit your space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YmLE81WsfeQ</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11181-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YmLE81WsfeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Narrow Wooden Shelving Units — Bathroom Storage Solutions</video:title>
      <video:description>Acquire several narrow wooden shelving units, which are available in various sizes. These units provide an excellent storage solution that helps keep everything neatly organized in a small bathroom. To maximize vertical space, you can stack smaller units on top of larger ones, creating a custom tall-and-narrow storage tower rather than a wide one that would consume more floor space. This arrangement allows for efficient categorization of items on different levels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YmLE81WsfeQ</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11182-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8Gw9AtbcMzg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Stud Positions — Bathroom Storage Solutions</video:title>
      <video:description>Before beginning cabinet installation, it is crucial to prepare the wall by marking the locations of the wall studs. Use a stud finder to locate these positions along the wall and mark them clearly with a pencil. This step ensures that you can easily find secure fixing locations for the cabinets later in the process, providing stability and compliance with building codes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8Gw9AtbcMzg</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11182-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F1CFsVa0zG8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Wall Studs and Plan Cabinet Placement — Bathroom Storage Solutions</video:title>
      <video:description>Begin by locating the wall studs using a stud finder to ensure secure cabinet mounting. Once studs are identified, refer to your kitchen&apos;s floor plan to determine the exact placement of each wall cabinet and how it aligns with the discovered wall studs. The goal is to attach each cabinet to at least one wall stud for maximum stability. When measuring for cabinet width, always use the front face frame width of the cabinet, not the back, to account for the frame&apos;s reveal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F1CFsVa0zG8</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11182-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vFkWoIQ72c4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Wall and Cabinet Backs — Bathroom Storage Solutions</video:title>
      <video:description>On the wall where the cabinets will be installed, locate the studs using a stud finder and mark their positions. Install a level wooden strip (ledge) below where the cabinets will hang; this strip will support the cabinets during installation. Measure the distance from the wall edge to the center of each stud. Transfer these measurements to the back of the cabinets. At these marked locations, run 2 1/2-inch cabinet screws through the back of the cabinet so they just emerge from the front, then partially screw them back in from the front. This prepares the screws for quick fastening once the cabinet is on the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vFkWoIQ72c4</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11183-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ISgEXkedYjM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Wall Mount Board — Bathroom Storage Solutions</video:title>
      <video:description>Carefully align the prepared wall mount board with the wall anchors (for cement walls) or stud locations (for wooden walls). Use your leveler to ensure the board is perfectly horizontal. Once aligned and leveled, use your drill to drive the provided screws through the holes in the wall mount board and into the wall. For cement walls, the screws will engage with the wall anchors. For wooden walls, the screws should be driven directly into the wall studs for maximum support. Ensure the board is firmly secured and does not wobble.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ISgEXkedYjM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11183-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pGHulqd7GIs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wall Mount Brackets — Bathroom Storage Solutions</video:title>
      <video:description>To mount the shelves, the creator first locates the wall studs using a stud finder. He marks the center of the studs with a pencil. Holding the wall-mount bracket in place, he uses a level to ensure it&apos;s straight, then pre-drills and screws the bracket into the studs using an impact driver and deck screws. He ensures at least two screws go into solid studs for each bracket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pGHulqd7GIs</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11183-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7BT7P01oaEA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Walls and Install Horizontal Ledgers — Bathroom Storage Solutions</video:title>
      <video:description>Begin by preparing the walls. Use a drill with a suitable drill bit (e.g., masonry bit for concrete block walls) to create pilot holes at the desired heights for your shelves. Insert wall plugs or anchors into these holes to ensure a secure fastening point. Then, align horizontal wooden ledgers (timber planks) with the pilot holes and use a drill/driver to screw them securely into the wall, utilizing the wall plugs. Employ a spirit level to ensure that all ledgers are perfectly horizontal for stable shelving.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7BT7P01oaEA</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11184-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B2fft07wPI0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mounting the First Cabinet — Bathroom Storage Solutions</video:title>
      <video:description>Carefully lift the first cabinet onto the installed ledger board. Ensure it is snug against the wall and properly aligned with your marked layout. Using a cordless drill or driver, anchor the cabinet to the wall studs by driving #8 x 3 inch black head cabinet installation screws through the pre-drilled pilot holes. After initial fastening, use a level to double-check that the cabinet is both level and plumb.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B2fft07wPI0</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11184-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mJKZg4UISvM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level, Secure, and Finish Wall Cabinets — Bathroom Storage Solutions</video:title>
      <video:description>After securing the top of the cabinet, use a level to check if the cabinet is perfectly plumb (vertically straight) and level (horizontally flat). If it&apos;s not plumb, use shims to fill any gaps between the back of the cabinet and the wall or between the bottom of the cabinet and the wall until the cabinet is perfectly vertical. Once plumb and level, secure the cabinet fully by driving screws through the remaining pilot holes at the bottom of the cabinet into the studs. Repeat this process for all remaining wall cabinets. Once all wall cabinets are installed, reinstall any shelves that were removed for installation and attach the cabinet doors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mJKZg4UISvM</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11184-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5xN9kPD7ddU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the First Upper Cabinet — Bathroom Storage Solutions</video:title>
      <video:description>Carefully lift the first upper cabinet, typically starting with a corner cabinet, into its designated position. Align the bottom edge of the cabinet precisely with the previously marked level line on the wall. Once the cabinet is aligned, secure it to the wall studs using 3-inch screws driven through the pre-drilled holes in the cabinet&apos;s back panel. As you secure it, continuously check for levelness and plumb in both directions (side-to-side and front-to-back) using a 4-foot level. Use shims as needed, inserting them between the cabinet and the wall, to correct any discrepancies and ensure the cabinet is perfectly level and plumb before fully tightening the screws. This process prevents warping and creates a stable installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5xN9kPD7ddU</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11185-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5xN9kPD7ddU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drawers and Doors — Bathroom Storage Solutions</video:title>
      <video:description>With the base cabinet boxes securely installed and joined, the next step is to install the drawers and doors. For the drawers, carefully slide them into the pre-installed runners within the cabinet box, ensuring they move smoothly and without obstruction. For the cabinet doors, attach them to their hinges according to the manufacturer&apos;s instructions. Once installed, take the time to adjust the hinges as necessary. This ensures that the doors hang perfectly straight, close properly, and maintain consistent, even gaps (reveals) between them and adjacent doors or drawer fronts. This fine-tuning is crucial for both the functionality and aesthetic appeal of the cabinetry.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5xN9kPD7ddU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11185-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wO2sFsBjElY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Cabinet Components — Bathroom Storage Solutions</video:title>
      <video:description>With all the cabinet boxes securely installed, the final step is to add the cabinet doors, drawers, and interior shelving. This typically involves attaching hinges to the doors and then to the cabinet frames, installing drawer slides and then the drawers, and placing adjustable shelves inside the cabinets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wO2sFsBjElY</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11185-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SiUIMJ4a4C8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Dresser Drawers and Fronts — Bathroom Storage Solutions</video:title>
      <video:description>Install the completed drawer boxes into the dresser cabinet and attach the drawer fronts. Slide each drawer box onto its corresponding drawer slide assembly. Use spacer blocks to accurately position the drawer fronts, ensuring even gaps. Clamp the drawer front to the drawer box and then screw it in place from the inside of the drawer box. Repeat this for all four drawers, working from top to bottom. Once installed, the drawers should slide smoothly. Note that a 1/4 inch plywood back panel can be added to the dresser cabinet for additional stability, although this is done later off-camera.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SiUIMJ4a4C8</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11186-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f5R-XY8keMg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Leveling and Adjustments — Bathroom Storage Solutions</video:title>
      <video:description>The final step involves a thorough check of the entire installation. The installer uses a spirit level to verify that all cabinets are plumb and level and that the countertop is perfectly horizontal. Any minor adjustments are made to ensure a professional finish and long-term stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f5R-XY8keMg</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11186-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B2fft07wPI0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Review and Considerations — Bathroom Storage Solutions</video:title>
      <video:description>With the cabinets and doors installed, perform a final visual inspection. Note any minor imperfections, but appreciate the cost savings achieved through DIY. Consider leaving the protective plastic film on the cabinet doors and delaying the installation of hardware (handles/knobs) until other messy renovation tasks, such as drywall finishing and painting, are complete. This helps protect the finished surfaces from scratches and dirt.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B2fft07wPI0</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11174-1</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stair Surface — Stair Tread Installation</video:title>
      <video:description>Although not explicitly demonstrated in the video, it is crucial to ensure the staircase is clean before installing the treads. Thoroughly clean each wooden stair surface to remove any dust, dirt, pet hair, or debris. This preparation ensures optimal adhesion of the non-slip backing, preventing the treads from shifting and maintaining a neat appearance. Use a vacuum cleaner for loose particles, followed by a damp cloth and a mild cleaner if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11174-2</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Stair Tread Installation</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11174-3</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wSsFb5YVHag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stair Surface — Stair Tread Installation</video:title>
      <video:description>Before applying the anti-slip strip, it is crucial to ensure the stair surface is clean, dry, and free of any dust, dirt, or grease. Use a cleaning cloth and a mild cleaner to thoroughly wipe down the area where the strip will be applied. Allow the surface to dry completely to ensure optimal adhesion of the self-adhesive strip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wSsFb5YVHag</video:player_loc>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11175-1</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Installation and Final Inspection — Stair Tread Installation</video:title>
      <video:description>Repeat the placement and pressing process for all remaining carpet stair treads, moving systematically up or down the staircase. Ensure each tread is aligned consistently with the previous one, maintaining even spacing and straightness. After all treads are installed, perform a final inspection. Visually check for any misalignments or loose edges. Walk up and down the stairs to confirm that each tread feels firmly secured and does not shift underfoot, ensuring both safety and a polished aesthetic for your newly enhanced staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11175-2</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Tape and Review Installation — Stair Tread Installation</video:title>
      <video:description>Once all stair treads are securely installed on both the steps and the landings, the homeowner carefully removes all the blue painter&apos;s tape that was used for marking. She then steps back to inspect the completed transformation, highlighting the improved aesthetic and the significantly enhanced safety provided by the non-slip surface, which is particularly beneficial for her toddler who can now navigate the stairs without slipping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11175-3</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11176-1</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Stair Centerline — Stair Tread Installation</video:title>
      <video:description>To ensure accurate and straight placement of the anti-slip treads, use masking tape to create a guideline. Place a strip of masking tape along the front edge of the stair tread. Next, measure the total width of the stair using a measuring tape. Divide this measurement in half to find the center point. Use a pencil to mark this center point directly onto the masking tape. Repeat for each stair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11176-2</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread Placement — Stair Tread Installation</video:title>
      <video:description>To ensure accurate and consistent placement of each stair tread, the homeowner uses blue painter&apos;s tape to mark the desired position on the hardwood steps. A measuring tape is used to confirm precise spacing and alignment, ensuring a symmetrical reveal of the wood on both sides of each tread. This meticulous marking helps maintain a uniform and professional look across the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11176-3</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WjkM8ou_xoI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Stair Tread Placement — Stair Tread Installation</video:title>
      <video:description>To ensure consistent and straight placement of the carpet treads, measure the desired distance from the edge of the stairs. Then, use blue painter&apos;s tape to create parallel guide lines up the entire staircase. This helps in visually aligning each tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WjkM8ou_xoI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11177-1</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit Laminate Pieces to Each Tread — Stair Tread Installation</video:title>
      <video:description>Prior to applying any adhesive, carefully place all the freshly cut laminate pieces, including both the nosing and the main tread pieces, onto their respective stair tread. This &apos;dry-fit&apos; allows you to ensure that all pieces fit perfectly. Visually inspect for tight seams, check for flush edges against the wall, and confirm proper alignment with the nosing. Make any necessary minor adjustments to the cuts at this stage before final installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11177-2</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fit Tread and Nosing — Stair Tread Installation</video:title>
      <video:description>Once the stair tread and nosing pieces are cut, bring them back to the stairs for a dry fit. Place them into their final positions without adhesive to ensure all cuts are perfect and the pieces fit snugly against the riser and along the stair&apos;s edges. Make any necessary micro-adjustments at this stage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11177-3</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Stair Tread Installation</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11178-1</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Stair Tread Installation</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11178-2</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the First Tread — Stair Tread Installation</video:title>
      <video:description>Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11178-3</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Tread Application — Stair Tread Installation</video:title>
      <video:description>Continue the application process by slowly and steadily peeling back the remaining backing paper from the anti-slip tread while simultaneously pressing down with the roller. Work your way along the length of the tread, ensuring consistent pressure to eliminate air bubbles and create a strong bond. Once all the treads are in place, give each one a final firm press with the roller, starting from the center and working outwards. This ensures they are perfectly secure and free of any trapped air, making your stairs safe and ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11179-1</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11179-2</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zb2dGhifZhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Self-Adhesive Carpet Stair Treads — Stair Tread Installation</video:title>
      <video:description>Begin by peeling off the clear protective film from the self-adhesive backing of a new light-colored, textured carpet stair tread. Carefully position the tread onto a clean wooden stair, aligning its back edge precisely with the riser. Use a long strip of green painter&apos;s tape, applied vertically along the wall side of the stairs, as a guide to ensure consistent placement and a straight line. Once positioned, press down firmly across the entire surface of the tread, working from back to front, to ensure good adhesion and minimize air bubbles. Repeat this process for all remaining stairs, working your way down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zb2dGhifZhE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11179-3</loc>
    <lastmod>2026-11-20T03:28:36.568Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-20T03:28:36.568Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11169-1</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N5xVJ2fg2YQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow for Curing and Final Cleanup — outdoor stair treads for dogs</video:title>
      <video:description>Allow the construction adhesive to cure completely. The video mentions a cure time of 2 to 7 days, so avoid stepping on the newly repaired steps during this period to allow the adhesive to fully bond and strengthen. The man places a traffic cone as a visual reminder to prevent anyone from walking on the step prematurely. After the curing time, blow away any residual dirt or debris from the area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N5xVJ2fg2YQ</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11169-2</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ojh8LPXJ2Zw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow for Curing Time — outdoor stair treads for dogs</video:title>
      <video:description>Once all the stones are reattached and excess adhesive is cleaned, cover the repaired area with a wooden board. Create and place a visible sign that reads &apos;Glue Drying! Please Step Over&apos; to alert others and prevent accidental disturbance of the newly set stones. Allow the adhesive to cure completely for at least a few days to ensure maximum bond strength and durability. The presenter notes that 24 hours was not sufficient, so a longer curing time is recommended.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ojh8LPXJ2Zw</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11169-3</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gfYhkz9IG7s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Final Cure Time — outdoor stair treads for dogs</video:title>
      <video:description>After successfully reattaching the sole and applying pressure, the shoe should be left undisturbed for a minimum of a few hours, ideally overnight, to allow the adhesive to fully cure. This extended curing time ensures maximum bond strength and durability. For the purpose of the video, the presenter showed results after one hour, demonstrating good initial adhesion, but emphasizes that full curing takes longer. Always refer to the specific manual or instructions provided with your brand of contact adhesive for precise curing times, as they can vary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gfYhkz9IG7s</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11170-1</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — outdoor stair treads for dogs</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11170-2</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — outdoor stair treads for dogs</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11170-3</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — outdoor stair treads for dogs</video:title>
      <video:description>Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11171-1</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Cut Your Treads — outdoor stair treads for dogs</video:title>
      <video:description>With the nosing removed, prepare the replacement treads for installation. Begin by measuring each tread individually using a tape measure, as stairway widths can vary from one step to the next. Mark the length that needs to be cut off using a sharpie or pencil. If the tread is a double return tread, you will not need to make any further cuts as it has been manufactured to your provided dimensions. As a pro tip, use a piece of scrap wood to push the tread out at the return area. This allows you to properly scribe the skirt before cutting, which will help give you an exact fit and cut for your tread. Use a miter saw to make the necessary cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11171-2</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Stair Treads — outdoor stair treads for dogs</video:title>
      <video:description>Each stair in a staircase is often slightly different in length, so it&apos;s crucial to measure and cut each new tread individually. Place an old, removed stair tread side-by-side with a new, uncut tread. Use the old tread as a template to mark the exact length needed on the new tread with a pencil. The presenter uses a circular saw for cutting; a table saw is another suitable option. When operating the circular saw, ensure both hands are firmly on the tool and your feet are well out of the way to prevent accidents, as this is a common point of injury.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11171-3</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Treads to Size — outdoor stair treads for dogs</video:title>
      <video:description>Once measurements are taken and marked on the stair treads, use a miter saw to precisely cut them to the required width and depth. Ensure that the cuts are straight and clean for a professional finish. If the treads have a carpeted or fabric surface, you may need a sharp utility knife to score or cut through that material first, or ensure your saw blade is specifically designed for such materials to cut cleanly without fraying.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11167-1</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — outdoor stair treads for dogs</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11167-2</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — outdoor stair treads for dogs</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11167-3</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hqxHbk64z8U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Treads — outdoor stair treads for dogs</video:title>
      <video:description>After the stringer is in place, measure the width of each individual step to ensure accuracy, as concrete steps can vary slightly. Once measured, solid oak boards are cut to the precise width using a miter saw. It&apos;s crucial to number each cut piece to match its corresponding step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hqxHbk64z8U</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11172-1</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1550uOmpgi0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install a Single Stair Tread — outdoor stair treads for dogs</video:title>
      <video:description>Take one carpet stair tread and carefully peel off the protective plastic backing from its underside, exposing the self-adhesive layer. Using the previously set marking guide or a measuring tape, align the tread precisely on the stair. Once satisfied with the placement, firmly press the tread down onto the stair surface. Use your hands to smooth out the entire surface of the tread, ensuring complete contact with the stair and removing any trapped air bubbles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1550uOmpgi0</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11172-2</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Treads — outdoor stair treads for dogs</video:title>
      <video:description>Starting from the bottom step of the staircase, carefully align the first prepared stair tread onto the wooden step. Ensure the tread is centered, positioned straight, and covers the desired area of the step. Once satisfied with the placement, firmly press the tread down across its entire surface, paying close attention to the edges and corners, to securely bond the adhesive to the wood. The installer in the video kneels and crawls up the stairs, applying significant body weight to ensure good contact. Repeat this alignment and pressing process for all remaining stairs, working your way up the staircase one tread at a time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11172-3</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — outdoor stair treads for dogs</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11168-1</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hVs1YaoZyKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure New Treads with Screws — outdoor stair treads for dogs</video:title>
      <video:description>Once the adhesive is applied, place the new tread onto the stringers, pushing it down firmly into the bead of adhesive. Ensure there is a small 1/8-inch gap between the new tread and any adjacent boards for proper expansion and drainage. For fasteners, always use screws rather than nails, as they provide a much tighter and more durable hold. Specifically, use 2.5-inch exterior-grade screws. Using a Hitachi drill, pre-drill pilot holes with an 1/8-inch bit, carefully lining them up with the center of the stringer to prevent splitting the wood. Then, use a DeWalt impact driver to drive the screws in, countersinking the head slightly so it&apos;s flush or just below the surface of the tread. For the front edge of the board, where the stringer&apos;s wood grain might be weak or &apos;sketchy,&apos; it is often better to put a screw down into the riser below instead of directly into the stringer end. Line it up by eye, pre-drill with the 1/8-inch bit, and then drive the screw in with the impact driver, countersinking it as before. Repeat this fastening process for each stringer contact point and for the front edge of each new tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hVs1YaoZyKA</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11168-2</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ztC3KfZEjO0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Tread with Fasteners — outdoor stair treads for dogs</video:title>
      <video:description>With the tread firmly seated on the adhesive, a pneumatic nail gun (Paslode brand is shown) is used to fasten the tread permanently. Nails are driven through the front edge of the tread into the underlying ledger/riser structure. Additionally, nails (or screws, as mentioned by the presenter) are installed from the back of the riser into the back edge of the tread to create a robust and squeak-free connection. This dual fastening method ensures maximum stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ztC3KfZEjO0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11168-3</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure New Stair Treads — outdoor stair treads for dogs</video:title>
      <video:description>To permanently secure the new stair treads, first apply an adhesive like liquid nails to the stair stringers (the support beams) where the tread will rest. Use a caulk gun to apply an even bead of the adhesive. Then, carefully place the new tread onto the stringers, ensuring it is flush and properly aligned. Finally, use a nail gun to fasten the tread securely by driving nails into the sides of the stair structure, typically into the stringers and risers, creating a strong bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11173-1</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — outdoor stair treads for dogs</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11173-2</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — outdoor stair treads for dogs</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11173-3</loc>
    <lastmod>2026-10-02T19:37:34.365Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — outdoor stair treads for dogs</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-10-02T19:37:34.365Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11160-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7sCBgYaJ1fg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Iron and Fabric — Fabric Painting Project</video:title>
      <video:description>Preheat your dry iron to its maximum temperature for at least 5 minutes. Do not use a smart iron or a steam iron, as they may not provide the consistent high temperature and dry heat required for successful transfer. Place an old cotton t-shirt or another suitable fabric on your hard, heat-resistant surface (avoiding an ironing board). This provides a slight cushion and helps distribute heat evenly. Pre-iron the fabric where the transfer will be applied to remove any wrinkles and to preheat the fabric itself. If you are applying to a t-shirt, you can use the included PPD Shirt Alignment Tool to help center your image, following its instructions or a separate video guide if available.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7sCBgYaJ1fg</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11160-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2hZN9teXhTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Materials and Prepare Fabric — Fabric Painting Project</video:title>
      <video:description>Collect all necessary materials including your prepared stencil, a stencil brush or foam dauber, fabric paint, and the fabric item (e.g., a hoodie) you intend to paint. Lay the fabric item flat on a clean, stable surface, smoothing out any wrinkles in the area where the stencil will be applied. This ensures a smooth surface for painting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2hZN9teXhTM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11161-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2hZN9teXhTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Stencil and Insert Cardboard — Fabric Painting Project</video:title>
      <video:description>Carefully place the prepared stencil onto the desired area of your fabric. Press down firmly across the entire stencil, especially around the edges of the design, ensuring good, close contact with the fabric. Next, insert a piece of cardboard or similar rigid material inside the hoodie, directly under the area you will be painting. This acts as a protective barrier to prevent the fabric paint from bleeding through to the back side of the garment, keeping the inside clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2hZN9teXhTM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11162-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-vfViHNKY-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Direct Trace Method — Fabric Painting Project</video:title>
      <video:description>For light-colored fabrics, this method involves placing the fabric directly over a printed design and tracing the pattern onto the fabric using a pencil or pen. This is the simplest transfer method.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-vfViHNKY-g</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11162-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qqjQHMJifH8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Iron the Design onto Fabric — Fabric Painting Project</video:title>
      <video:description>Once the design is traced onto the tracing paper, turn the paper over so the traced design faces down onto your chosen fabric. Position the design precisely where you want it on the fabric. Using a hot iron (such as a Morphy Richards Comfigrip), iron over the back of the tracing paper for approximately 5 to 10 seconds. This heat application will transfer the permanent lines of the design from the paper onto the fabric.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qqjQHMJifH8</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11162-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/99V-KhXShWg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tracing Designs Using a Light Table — Fabric Painting Project</video:title>
      <video:description>For designs that aren&apos;t on Peel &amp; Stitch sheets, you can trace them directly onto fabric. Turn on a light table and place your design template on it. Lay your chosen fabric over the design. The light from the table will allow you to see the design through the fabric. If you plan to add a separate stabilizer to the back of your fabric, trace the design first before applying the stabilizer, as the additional layer can make the design harder to see through the fabric.</video:description>
      <video:player_loc>https://www.youtube.com/embed/99V-KhXShWg</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11163-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2hZN9teXhTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Fabric Paint with Stippling Technique — Fabric Painting Project</video:title>
      <video:description>Pour a small amount of fabric paint into your paint tray. Dip your stencil brush into the paint, loading it with just a small amount. This is a crucial step: brush off any excess paint onto a paper towel or an unused section of the paint tray until the brush is almost dry to the touch. This technique, known as &apos;dry brushing&apos; or &apos;stippling,&apos; is essential for achieving clean, crisp stencil lines. Begin applying the paint to the stencil using a stippling motion, dabbing the brush straight up and down over the stencil cutouts. Work your way across the design, reloading the brush with a small amount of paint and brushing off excess as needed to maintain a consistent dry brush.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2hZN9teXhTM</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11163-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NMuQVK5fOJM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Fabric Paint — Fabric Painting Project</video:title>
      <video:description>Dispense a small, manageable amount of fabric paint onto a disposable plate or a suitable palette. Pick up the paint using a round sponge brush, gently dabbing off any excess paint on the side of the plate. This prevents oversaturation, which can cause paint to bleed under the stencil. Carefully and lightly dab the paint-loaded sponge brush over all the open areas of the stencil pattern, applying thin, even layers. Build up the color gradually until you achieve the desired opacity and coverage for your design.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NMuQVK5fOJM</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11163-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/immo_S3_l7k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Fabric Paint to Stencil — Fabric Painting Project</video:title>
      <video:description>Using the loaded stencil brush, begin applying the fabric paint to the open areas of the stencil. For intricate designs, use a swirling motion to push the paint into the fabric fibers, ensuring even coverage and preventing harsh lines. For larger, more open areas within the design, you can also use a brushing motion to fill them in. Continue this process until the entire design is filled with paint, then check to make sure you haven&apos;t missed any spots.</video:description>
      <video:player_loc>https://www.youtube.com/embed/immo_S3_l7k</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11164-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_lR4gFcDsg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint Your Design — Fabric Painting Project</video:title>
      <video:description>Once your base coat is dry, you can begin adding your detailed design. Lightly trace your desired pattern or image onto the painted surface using a pencil. This allows for precise placement and easy correction if needed. After tracing, use a suitable paintbrush to carefully fill in your design with paint. Work in sections and allow colors to dry slightly before applying adjacent colors to prevent bleeding. Add additional layers if necessary to achieve desired opacity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_lR4gFcDsg4</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11164-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RuBI_KQNqak/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Final Black Outlines — Fabric Painting Project</video:title>
      <video:description>After all the colors have been filled in and dried, use a fine-tipped paintbrush and a &apos;Golden Black high flow paint&apos; to apply the final, crisp outlines. This specific paint is praised for its smooth application, which is essential for achieving clean and sharp defining lines around all elements of your design. Take your time to ensure precision for a polished look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RuBI_KQNqak</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11164-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pfdO5K43NQg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Intricate Detail Lines — Fabric Painting Project</video:title>
      <video:description>Add intricate details by selecting the &apos;Detail Brush&apos; from your brush set. Choose a dark color, such as a deep blue, and draw thin, squiggly, organic lines that weave through the existing paint layers. Introduce another dark color, like dark red, to add more dynamic lines, creating a sense of movement and complexity within the abstract piece.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pfdO5K43NQg</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11165-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OsN2hp-SbN4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Heat Set the Paint — Fabric Painting Project</video:title>
      <video:description>After the fabric paint has completely dried (refer to your specific paint&apos;s instructions for drying times), cover the stenciled area with a thin towel. Set your iron to the appropriate heat setting for your fabric and fabric paint (usually medium to high, without steam). Press the iron over the towel, covering the design, to heat set the paint. This step is crucial as it permanently bonds the paint to the fabric, making it washable and durable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OsN2hp-SbN4</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11165-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2hZN9teXhTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reveal and Heat Set the Design — Fabric Painting Project</video:title>
      <video:description>Once the entire design has been painted and the paint is slightly dry to the touch, carefully and slowly peel off the stencil from the fabric. Remove the cardboard from inside the garment. Allow the fabric paint to fully dry according to the manufacturer&apos;s instructions, which typically takes 24-72 hours. After the paint is completely dry, heat set the design with an iron to make it permanent and washable. Place a pressing cloth or parchment paper over the painted area and iron on a medium-high setting for several minutes, continuously moving the iron to ensure even heat distribution. This step is crucial for the longevity of your design.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2hZN9teXhTM</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11165-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/immo_S3_l7k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Air Dry and Heat Seal the Design — Fabric Painting Project</video:title>
      <video:description>Allow the stenciled t-shirt to air dry completely. This might take several hours, depending on the paint and humidity. Once the paint is fully dry to the touch, you need to heat-seal the design to make it permanent and washable. Place a piece of scrap fabric (like a plain cotton cloth) between the stenciled design and the ironing board, and another between the design and the iron. Then, iron the design, applying heat to cure the fabric paint. After this step, the design is sealed, and the t-shirt can be washed and worn without the design fading or washing off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/immo_S3_l7k</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11166-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7sCBgYaJ1fg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wash and Care for Garment — Fabric Painting Project</video:title>
      <video:description>To care for your newly decorated garment and ensure the longevity of the transfer, wash it inside out in a washing machine with a spin cycle. Use the normal wash setting at approximately 104°F (40°C); do not use a delicate wash cycle. Avoid harsh detergents or bleach. Hang dry or tumble dry on a low setting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7sCBgYaJ1fg</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11166-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QJ1tiRkvgIg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finishing and Curing — Fabric Painting Project</video:title>
      <video:description>After completing all desired stencil sections and carefully removing the final stencil and masking tape, the video demonstrates a gentle pressing action with a cloth over the painted areas. This step might be performed to gently press the paint into the fabric for better adhesion or to ensure evenness. Finally, allow the paint to fully dry and cure according to the specific instructions provided by the chalk paint manufacturer. Proper curing time is essential for the durability and washability of the decorated curtain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QJ1tiRkvgIg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11166-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/immo_S3_l7k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Air Dry and Heat Seal the Design — Fabric Painting Project</video:title>
      <video:description>Allow the stenciled t-shirt to air dry completely. This might take several hours, depending on the paint and humidity. Once the paint is fully dry to the touch, you need to heat-seal the design to make it permanent and washable. Place a piece of scrap fabric (like a plain cotton cloth) between the stenciled design and the ironing board, and another between the design and the iron. Then, iron the design, applying heat to cure the fabric paint. After this step, the design is sealed, and the t-shirt can be washed and worn without the design fading or washing off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/immo_S3_l7k</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11158-1</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F8eLXPuMBiw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Polyurethane Sealer — Stair Tread Replacement</video:title>
      <video:description>Once the stain has completely dried (refer to product instructions for recommended drying times, usually a few hours), it&apos;s time to apply the polyurethane sealer. Sealer is extremely important for high-traffic areas like stair treads as it provides durability and protection against wear and tear. Using a clean paintbrush, apply the polyurethane in the direction of the wood grain. Similar to staining, use cardboard to protect the adjacent white risers and walls, ensuring a clean application line. The biggest tip when working with sealer is to make sure to brush out any drip marks or excess product immediately to avoid visible streaks and uneven finish. Apply multiple thin coats, allowing adequate drying time between each coat, according to the manufacturer&apos;s instructions, for maximum durability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F8eLXPuMBiw</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11158-2</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fTh9RuhZAtY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Wood Top Coat — Stair Tread Replacement</video:title>
      <video:description>After the stain has completely dried, apply a durable wood top coat (sealer) designed for floors or stairs. This will protect the stained wood from wear and tear. The video creator used a regular brush for application. Ensure to follow the manufacturer&apos;s instructions for application and drying times. This step is critical for the longevity of your stained stairs. The creator notes that stairs in high-traffic areas will need to be unused for approximately two days after the top coat is applied to ensure proper curing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fTh9RuhZAtY</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11158-3</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrqO6WsnouE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Stained Treads — Stair Tread Replacement</video:title>
      <video:description>After the stain has completely dried, apply four coats of a clear sealant, such as Varathane NanoDefence Premium Clear Floor Finish (Satin), to protect the treads. Apply thin, even coats, allowing each coat to dry for the recommended time (2 hours for re-coat) before applying the next. This step will protect the stained wood from wear and tear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrqO6WsnouE</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11157-1</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hVs1YaoZyKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure New Treads with Screws — Stair Tread Replacement</video:title>
      <video:description>Once the adhesive is applied, place the new tread onto the stringers, pushing it down firmly into the bead of adhesive. Ensure there is a small 1/8-inch gap between the new tread and any adjacent boards for proper expansion and drainage. For fasteners, always use screws rather than nails, as they provide a much tighter and more durable hold. Specifically, use 2.5-inch exterior-grade screws. Using a Hitachi drill, pre-drill pilot holes with an 1/8-inch bit, carefully lining them up with the center of the stringer to prevent splitting the wood. Then, use a DeWalt impact driver to drive the screws in, countersinking the head slightly so it&apos;s flush or just below the surface of the tread. For the front edge of the board, where the stringer&apos;s wood grain might be weak or &apos;sketchy,&apos; it is often better to put a screw down into the riser below instead of directly into the stringer end. Line it up by eye, pre-drill with the 1/8-inch bit, and then drive the screw in with the impact driver, countersinking it as before. Repeat this fastening process for each stringer contact point and for the front edge of each new tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hVs1YaoZyKA</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11157-2</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Replacement</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11157-3</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Replacement</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11155-1</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hVs1YaoZyKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Carefully Remove Old Treads — Stair Tread Replacement</video:title>
      <video:description>Carefully remove the old, damaged deck treads. For boards that are already loose, gently pry them up with a large screwdriver, avoiding excessive force. If a board is tightly secured, do not immediately reach for a pry bar, as this can damage the fragile stair stringers underneath. Instead, use a large screwdriver and a hammer to split the board into pieces by driving the screwdriver beside the nail heads. This action forces the wood grain around the nails to split, allowing the pieces to be removed easily without stressing the stringers. For very stubborn boards that require more force, use a pry bar, but apply leverage as slowly and carefully as possible. It is crucial to prevent damage to the stair stringers, which are the structural pieces below the treads. These stringers are shaped like a sawtooth, with diagonal grain lines that make them very weak and prone to fracturing. Avoid hitting them sideways or applying excessive leverage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hVs1YaoZyKA</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11155-2</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hOcPPO4LRfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Stair Treads — Stair Tread Replacement</video:title>
      <video:description>After removing the scotia molding, access the space between the top of the stringer and the underside of the tread. Insert a long metal cutting blade, typically from a reciprocating saw, into this gap. The goal is to cut the nails securing the tread to the stringer without damaging the stringer itself. Once the nails are cut, use a pry bar to lift the tread up and remove it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hOcPPO4LRfI</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11155-3</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/diTxF53fdrA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Physically Remove Old Stair Treads — Stair Tread Replacement</video:title>
      <video:description>For the initial removal of the old stair treads, which were extensively glued and nailed, the video suggests using robust tools. Insert a crowbar underneath the edge of an old tread, and then use a sledgehammer to drive the crowbar deeper, creating leverage. Pry the tread upwards forcefully. It&apos;s important to note that the treads, often made of composite wood, are likely to break into multiple pieces during this process due to the strong adhesive. The video shows broken pieces with nails still attached, indicating the force needed and the integrity of the original installation. After the main pieces are detached, extract any exposed, large nails from the underlying wooden structure using the claw of a hammer or the crowbar.</video:description>
      <video:player_loc>https://www.youtube.com/embed/diTxF53fdrA</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11156-1</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hVs1YaoZyKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Nails and Clean Stringers — Stair Tread Replacement</video:title>
      <video:description>After removing the old treads, address any remaining nails. Carefully pry out any exposed nails using a nail puller. Some nails may be brittle or rusted and break off; if they don&apos;t pry out, you can usually drive them all the way into the wood with a hammer. Once nails are dealt with, clean out any accumulated dirt, debris, or gunk that has collected around the stringers and in the spaces where the boards were. A 5-in-1 painter&apos;s tool is effective for carving out this buildup.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hVs1YaoZyKA</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11156-2</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fgKYII9TM7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stair Structure — Stair Tread Replacement</video:title>
      <video:description>After removing the old stair tread, thoroughly clean the exposed stair stringers and riser. Use a hammer and a pry bar or pliers to remove any remaining nails, staples, or debris from the wood surfaces. This ensures a clean and flat surface for the new stair tread to sit flush and bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fgKYII9TM7E</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11156-3</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KMoh0dp78ek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Wooden Treads — Stair Tread Replacement</video:title>
      <video:description>With the new treads prepared, it&apos;s time to remove the old wooden treads that were beneath the carpet. Use a pry bar and hammer to carefully pry up each old tread from the stair stringers. The video shows the treads being removed one by one, exposing the framework beneath. Collect the removed treads and any remaining nails for disposal. After removing all old treads, clean up any debris, dust, or old adhesive from the stringers and risers, possibly using a vacuum or shop vac, to ensure a clean surface for the new tread installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KMoh0dp78ek</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11159-1</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Stair Treads — Stair Tread Replacement</video:title>
      <video:description>Each stair in a staircase is often slightly different in length, so it&apos;s crucial to measure and cut each new tread individually. Place an old, removed stair tread side-by-side with a new, uncut tread. Use the old tread as a template to mark the exact length needed on the new tread with a pencil. The presenter uses a circular saw for cutting; a table saw is another suitable option. When operating the circular saw, ensure both hands are firmly on the tool and your feet are well out of the way to prevent accidents, as this is a common point of injury.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11159-2</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hVs1YaoZyKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — Stair Tread Replacement</video:title>
      <video:description>Measure and cut new treads from standard 5/4 decking lumber, which is typically 1 inch thick and 5.5 inches wide. First, use a circular saw to square up one end of a new board, ensuring a clean and straight edge. A speed square can be clamped in place with your hand to act as a guide for the saw&apos;s sole plate, taking off approximately 3/4 of an inch. Next, pull a measurement from this squared end to determine the required length for the tread. Mark this measurement with a crow&apos;s foot and draw a straight line using a speed square and pencil. To make the cut safely and effectively, place the lumber on a scrap 2x4 as a prop block. This elevates the board off the ground and creates leverage, allowing the cut-off piece to fall away, which prevents blade binding. Use the speed square again as a guide for the circular saw, aligning the outside of the blade&apos;s tooth with the marked cut line, and then make the cut. Cut all replacement pieces to the required dimensions at once.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hVs1YaoZyKA</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11159-3</loc>
    <lastmod>2026-09-29T21:30:19.194Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wOGeyg9Vqm8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Lumber — Stair Tread Replacement</video:title>
      <video:description>After removing the old treads, measure their exact length to ensure the new ones are cut to fit perfectly. The narrator measures his old steps to be 57 inches long. Transfer this measurement to the new pressure-treated lumber. Use a square and a pencil to draw a straight, accurate cut line across the board. Then, use a circular saw to cut the new boards to the marked length.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wOGeyg9Vqm8</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-09-29T21:30:19.194Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11151-1</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Depth Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11151-2</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — Stair Tread Depth Measurement</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11151-3</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Depth Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11152-1</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Depth Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11152-2</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Depth Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11152-3</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Stair Tread Depth Measurement</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11153-1</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Tread Depth Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11153-2</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Stair Tread Depth Measurement</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11153-3</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Depth Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11154-1</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XB1xjbB3nkg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Analyzing Stairway Without Step Nosings (Deck Nosing Present) — Stair Tread Depth Measurement</video:title>
      <video:description>This step analyzes a stairway design where the individual steps lack a nosing (overhang), but the upper deck, to which the top step connects, has a 1-inch overhang. The presenter clarifies that, according to building codes, the tread measurement for the top step is taken from the farthest protruding section of the deck (including its 1-inch overhang) to the farthest projecting point of the step below. This means that despite the physical step being 11 inches deep, the code-compliant measurement becomes 10 inches for that top step. This creates an inconsistency with the other steps, which have a full 11-inch tread. The presenter notes that this specific scenario (deck having a nosing but steps not) is rare and that most building inspectors might not even catch this subtle discrepancy. He suggests a simple fix for this specific problem: remove the deck board, rip (cut) off the 1-inch overhang, and reinstall it to eliminate the nosing on the deck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XB1xjbB3nkg</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11154-2</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XB1xjbB3nkg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Analyzing Stairway with Consistent Nosings (Correct Design) — Stair Tread Depth Measurement</video:title>
      <video:description>This step demonstrates a correctly designed stairway where all steps, including the connection to the upper deck, uniformly feature a 1-inch nosing. Each tread depth is consistently 11 inches, measured from the front of the nosing on one step to the front of the nosing on the step below. This design adheres to building codes for consistent tread depth, ensuring safety and compliance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XB1xjbB3nkg</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11154-3</loc>
    <lastmod>2026-11-12T19:46:19.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hUqpsFBDynA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identifying Unacceptable Riser and Tread Variations — Stair Tread Depth Measurement</video:title>
      <video:description>The video then illustrates an unacceptable scenario where a riser is raised to 7 3/8 inches. This creates a 1/2-inch difference from the smallest 6 7/8-inch riser, which exceeds the 3/8-inch maximum allowed by code. The same principle applies to tread depths, with a half-inch difference between the smallest (10 3/4&quot;) and largest (11 1/4&quot;) tread being unacceptable if the maximum variation is 3/8 inch. It then shows a scenario where treads vary from 10 7/8 inches to 11 1/16 inches, which would be acceptable as the difference is less than 3/8 inch.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hUqpsFBDynA</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-11-12T19:46:19.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11149-1</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FKo3v7gnv5U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure First Step (10mm) — Stair Tread Depth Measurement</video:title>
      <video:description>After zeroing, carefully place the dial depth gauge onto the first step of the quick check block, which in this case is a 10mm step. Lower the probe until it rests on the step and note the reading displayed on the dial. This reading should ideally be 10mm, or very close to it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FKo3v7gnv5U</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11149-2</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FKo3v7gnv5U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Second Step (25mm) — Stair Tread Depth Measurement</video:title>
      <video:description>Next, move the dial depth gauge to the second step of the quick check block, which corresponds to a 25mm depth. Again, lower the probe gently onto the step and record the reading shown on the dial. Compare this reading to the expected 25mm value.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FKo3v7gnv5U</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11149-3</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RhaTIbcKKqc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Depth Measurement — Stair Tread Depth Measurement</video:title>
      <video:description>Once the dial indicator is properly zeroed, it is ready to measure depths. Place the base of the instrument firmly and squarely across the opening of the cavity or feature you wish to measure. For example, the presenter places it over the bolt face of a Remington rifle. Gently lower the indicator stem into the cavity until its tip makes contact with the bottom surface. The dial will then display a direct reading of the depth. In the demonstration, the measurement shown is approximately 0.142 inches. The stability provided by the base eliminates concerns about tipping or misalignment that often occur with standard calipers, ensuring a more accurate and repeatable measurement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RhaTIbcKKqc</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11146-1</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Tread Depth Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11146-2</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Depth Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11146-3</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nCu4uIwBOOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Stairs — Stair Tread Depth Measurement</video:title>
      <video:description>To ensure the carpet runner is long and wide enough, accurate measurements are essential. First, select one stair tread (the horizontal top surface of a step) and measure its depth. Next, measure the height of the riser (the vertical part of the step). Multiply the height by the number of risers and the depth by the number of treads on your staircase. Add these two sums together, then add an additional 6 to 8 inches to account for waste. This total will be the required length of the runner. If using more than one runner, add an additional 12 inches to the total length to account for seams where the two carpet pieces will join. If your staircase includes a landing and you plan to install the runner there, ensure you include the landing area in your measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nCu4uIwBOOE</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11147-1</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Depth Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11147-2</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Depth Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11147-3</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — Stair Tread Depth Measurement</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11148-1</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Stair Tread Depth Measurement</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11148-2</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Depth Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11148-3</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Tread Depth Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11150-1</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Tread Depth Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11150-2</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XB1xjbB3nkg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Analyzing Stairway with Consistent Nosings (Correct Design) — Stair Tread Depth Measurement</video:title>
      <video:description>This step demonstrates a correctly designed stairway where all steps, including the connection to the upper deck, uniformly feature a 1-inch nosing. Each tread depth is consistently 11 inches, measured from the front of the nosing on one step to the front of the nosing on the step below. This design adheres to building codes for consistent tread depth, ensuring safety and compliance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XB1xjbB3nkg</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11150-3</loc>
    <lastmod>2026-09-29T20:12:46.546Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Stair Tread Depth Measurement</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-29T20:12:46.546Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11142-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pudV-S1Od54/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Screen Material — Window Screen Repair</video:title>
      <video:description>Begin by removing the window screen from its frame in the window. Once removed, place the screen frame on a flat, stable surface, such as a garage floor or workbench. Using a small prying tool, carefully remove the old spline from the grooves around the edge of the screen frame. Once the spline is removed, you can then peel away and discard the old screen mesh material. It is important not to reuse the old spline, as it can become dried out and brittle over time, losing its ability to properly secure the new screen.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pudV-S1Od54</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11142-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VNCaulQVLeU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Screen and Clean Frame — Window Screen Repair</video:title>
      <video:description>Begin by removing the old window screen frame from the window. Once removed, place the screen frame on a flat, stable surface with the spline channel facing upwards. Use a flat blade screwdriver to carefully pry up one end of the existing spline, typically starting from a corner. Once an end is lifted, pull the entire spline out of the channel. It is recommended to replace the spline with a new one during this process, as old splines can become compressed or brittle over time, compromising the screen&apos;s tension and stability. After the spline is removed, lift and discard the old screen mesh from the frame. Finally, use a cloth or paper towel to thoroughly clean the screen channel, removing any dirt, debris, or old spline residue to ensure a clean surface for the new installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VNCaulQVLeU</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11142-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BaC2t0eAbig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Screen and Spline — Window Screen Repair</video:title>
      <video:description>Begin by removing the old, damaged screen from the window frame. Use a screwdriver or an awl to pry up one end of the old spline, which is the rubber or vinyl cord holding the screen in place within the frame&apos;s groove. Once an end is lifted, pull the spline out of the groove. After the spline is removed, you can easily pull the entire old screen out of the frame and discard it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BaC2t0eAbig</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11143-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kioMwDmiO70/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Screen Material — Window Screen Repair</video:title>
      <video:description>Lay the old, removed screen material flat on top of the new screen mesh. Use the old screen as a template to cut the new screen, ensuring to add an extra 2 inches of material around all sides. This extra material provides enough slack for proper tensioning during installation. Once cut, set the old screen aside and bring the clean screen frame back to the workspace.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kioMwDmiO70</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11143-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pudV-S1Od54/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut New Screen Material to Fit — Window Screen Repair</video:title>
      <video:description>Unroll the new screen mesh material and carefully lay it over the prepared screen frame. Ensure there is an overhang of approximately one inch beyond all edges of the frame. Use a pair of scissors to cut the new screen material to this approximate size, making sure to keep the excess material for later trimming.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pudV-S1Od54</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11143-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zlKLpse5JIk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut New Screen to Size — Window Screen Repair</video:title>
      <video:description>Unroll the new screen material and lay it flat over the prepared screen frame. Ensure there is an overhang of at least 1 to 2 inches (approximately 2.5 to 5 cm) on all sides of the frame. Use the scissors to cut the new screen material to this approximate size. This initial rough cut provides enough material to work with during installation without being too large or cumbersome.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zlKLpse5JIk</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11144-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UMDuYmHTabU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert Spline into Grooved Screen and Channel — Window Screen Repair</video:title>
      <video:description>Once the screen is pushed into the channel on one side, take the spline material and begin inserting it into the same groove, over the screen material. Use the concave wheel (the one with the groove in the middle) of your spline rolling tool to roll the spline into the channel. Start from one corner and work your way to the next, locking the screen into place. As you move to the next sides of the frame, gently pull the screen taut before inserting the spline to ensure a wrinkle-free and tight fit. You may use clamps or weights on the previously splined sides to maintain tension while working on subsequent sides, especially with fiberglass screen. Continue this process for all four sides of the frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UMDuYmHTabU</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11144-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zlKLpse5JIk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Screen and Spline — Window Screen Repair</video:title>
      <video:description>Place the newly cut screen material flat and centered over the screen frame. Take a new length of spline, ensuring it&apos;s slightly longer than the perimeter of the frame. Begin at one corner and use the convex wheel of the screen roller tool to gently press the spline and the screen material into the groove of the screen frame. Work your way around the perimeter, applying steady, even pressure. As you progress, ensure the screen remains taut and free of wrinkles. For the final seating of the spline, use the concave wheel of the screen roller tool, pressing firmly to secure the screen. Once the spline has been installed around the entire perimeter, cut the excess spline with scissors to fit perfectly, creating a clean seam.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zlKLpse5JIk</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11144-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pudV-S1Od54/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Spline and Screen — Window Screen Repair</video:title>
      <video:description>Begin by hand-pressing the new spline into one corner of the screen frame&apos;s groove, making sure it holds the new screen material in place. Once started, use a spline roller to firmly press the spline and the underlying screen material into the grooves around the entire perimeter of the frame. Apply gentle, consistent pressure. As you reach corners, do not cut the spline; instead, carefully round the corner with the spline and continue pressing it into the groove. Throughout this process, continuously pull the screen material taut with one hand while using the spline roller with the other, ensuring a tight, wrinkle-free screen.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pudV-S1Od54</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11145-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BaC2t0eAbig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim Excess Screen — Window Screen Repair</video:title>
      <video:description>Once the spline is fully installed around the entire perimeter, use a utility knife, or a sharp pair of scissors, to carefully trim the excess screen material that extends beyond the spline. Hold the knife at an angle against the outside edge of the spline and cut along the groove, ensuring a clean, flush finish. This step removes any loose screen material and gives the window screen a professional appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BaC2t0eAbig</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11145-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/n2Zc1dM9sP0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim Excess Screen — Window Screen Repair</video:title>
      <video:description>After the spline is completely installed and the screen is taut, use a utility knife or box cutter to trim the excess screen material. Carefully run the knife along the outer edge of the spline, pressing firmly to cut away the extra screen. This provides a clean, professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/n2Zc1dM9sP0</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11145-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t8vEnet3V14/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim Excess Screen — Window Screen Repair</video:title>
      <video:description>Once the spline is fully installed around the perimeter of the frame and the screen is secure, the next step is to cut off the excess screen material. Use a utility knife and place the blade into one corner of the frame, ensuring the knife is held at a 45-degree angle above the spline. Carefully cut away the excess screen material, moving along the spline. Be very careful not to accidentally cut the spline itself, as this would compromise the screen&apos;s tension and require reinstallation of that section of spline.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t8vEnet3V14</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11140-1</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit Laminate Pieces to Each Tread — Install LVP stair treads</video:title>
      <video:description>Prior to applying any adhesive, carefully place all the freshly cut laminate pieces, including both the nosing and the main tread pieces, onto their respective stair tread. This &apos;dry-fit&apos; allows you to ensure that all pieces fit perfectly. Visually inspect for tight seams, check for flush edges against the wall, and confirm proper alignment with the nosing. Make any necessary minor adjustments to the cuts at this stage before final installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11140-2</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install LVP stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11140-3</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Install LVP stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11136-1</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Smooth Stairs — Install LVP stair treads</video:title>
      <video:description>Before starting the installation, ensure that the existing stairs are thoroughly cleaned and smoothed. Use a broom to remove any dust, debris, or loose particles from the risers and treads. A clean and smooth surface is essential for proper adhesion and a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11136-2</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BFub6qhxbLg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stairs and Gather Materials — Install LVP stair treads</video:title>
      <video:description>Before beginning any installation, thoroughly clean the entire staircase. Ensure all dust, dirt, and debris are removed to allow for proper adhesion of the vinyl. Additionally, gather all necessary tools and materials, including an industrial-grade glue or adhesive, which is crucial for secure installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BFub6qhxbLg</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11136-3</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Install LVP stair treads</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11138-1</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Stair Centerline — Install LVP stair treads</video:title>
      <video:description>To ensure accurate and straight placement of the anti-slip treads, use masking tape to create a guideline. Place a strip of masking tape along the front edge of the stair tread. Next, measure the total width of the stair using a measuring tape. Divide this measurement in half to find the center point. Use a pencil to mark this center point directly onto the masking tape. Repeat for each stair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11138-2</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Anti-Slip Tread — Install LVP stair treads</video:title>
      <video:description>Before applying the anti-slip stair tread, you need to prepare it for proper alignment. On the backing side of the anti-slip tread, either measure halfway across its width and place a mark using your pencil, or simply fold the tread in half temporarily to create a slight crease in the backing paper. This mark or crease will serve as the center guide for aligning the tread with the marked centerline on your stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11138-3</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WjkM8ou_xoI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Stair Tread Placement — Install LVP stair treads</video:title>
      <video:description>To ensure consistent and straight placement of the carpet treads, measure the desired distance from the edge of the stairs. Then, use blue painter&apos;s tape to create parallel guide lines up the entire staircase. This helps in visually aligning each tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WjkM8ou_xoI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11137-1</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install LVP stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11137-2</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Install LVP stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11137-3</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Remaining Treads — Install LVP stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, moving up the staircase. For each subsequent tread, use the same centering and spacing measurements established with the first tread to ensure uniformity. Peel the backing (if self-adhesive) or apply tape, and press each tread firmly into place. The video shows the installer placing the treads one by one, working their way up the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11139-1</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install LVP stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11139-2</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Install LVP stair treads</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11139-3</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Install LVP stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11141-1</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Install LVP stair treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11141-2</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — Install LVP stair treads</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11141-3</loc>
    <lastmod>2026-09-28T00:52:40.666Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install LVP stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-28T00:52:40.666Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11129-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J8sSWX0FblQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prep the Garage Floor: Clean and Degrease — Garage Floor Painting</video:title>
      <video:description>Begin by emptying the entire garage, moving all items off the floor. Then, use a push broom to sweep away any loose dust, dirt, or debris. For tougher grime, such as grease stains or stubborn residue, use a wire brush to scrub the affected areas. Next, put on protective eyewear and gloves. Prepare the Rust-Oleum Cleaner and Degreaser by adding it to a bucket. For general cleaning, dilute the cleaner with water at a 1:1 ratio. For very stubborn stains, the product can be used at full strength, poured directly from the bottle onto the floor. Working in sections, pour the diluted or undiluted cleaner directly onto the floor. Allow the cleaner to sit on the surface for approximately 20 minutes for optimal results. Use a stiff bristled broom or scrub brush to thoroughly work the cleaner into the concrete surface. After washing, rinse the entire floor with a hose to remove all cleaning solution and foam. Ensure all suds are removed. Use a long handle squeegee to push out any remaining water, ensuring the floor is as dry as possible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J8sSWX0FblQ</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11129-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OZtbMa9VUt0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prep the Garage Floor (Clean) — Garage Floor Painting</video:title>
      <video:description>Before you begin cleaning, move all items out of your garage to ensure you have a clear workspace. Start by thoroughly sweeping away any dust or debris from the entire floor using a push broom. For stubborn or heavy stains, use protective eyewear and gloves, and spot treat them with full-strength Rust-Oleum Cleaner &amp; Degreaser, scrubbing with a stiff-bristled broom. Next, dilute the cleaner and degreaser by mixing it in a 1:1 ratio with water in a bucket. Working in 10 ft by 10 ft sections, pour the diluted solution directly onto the floor and use the stiff-bristled broom to work it into the surface, ensuring the product does not dry. After thoroughly washing each section, rinse away all the cleaning solution with a water hose, making sure to remove all remaining suds. The solution will not harm grass if rinsed well. Finally, use a long-handle squeegee to remove any leftover water from the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OZtbMa9VUt0</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11129-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GvKKqeUFJsI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Degrease the Concrete — Garage Floor Painting</video:title>
      <video:description>After removing everything from the garage, thoroughly clean and degrease the floor. First, use a leaf blower to clear any large debris, then sweep the entire floor with a floor broom to remove remaining dust and loose particles. It is extremely important to start with a clean floor to ensure the epoxy adheres properly. Next, prepare a degreaser solution by diluting a garage cleaner/degreaser in a bucket with water, following the product&apos;s instructions. Wet the concrete floor with a pressure washer or a garden hose. Pour the diluted degreaser onto the areas needing cleaning, especially stained spots, and scrub vigorously with a stiff brush. Rinse the scrubbed area with clean water, then use a floor squeegee to push the water out of the garage. For stubborn or heavy stains, repeat the scrubbing and rinsing process until the floor is visibly clean. This prep work is crucial as epoxy will not adhere to grease, oil, or any other residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GvKKqeUFJsI</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11130-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J8sSWX0FblQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch and Repair Concrete Cracks — Garage Floor Painting</video:title>
      <video:description>With the floor completely dry after etching, prepare to repair any cracks or holes using Rust-Oleum Concrete Patch and Repair. First, use a wire brush to remove any remaining dirt, dust, or debris from the cracks to ensure proper adhesion of the patch. Lay a clean piece of cardboard scrap on the floor for mixing. Put on protective gloves. This product is a two-part epoxy system, consisting of Part A (activator) and Part B (base). Mix a small amount of the two parts together on the cardboard using a putty knife, ensuring a 2:1 ratio (two parts of Part B to one part of Part A). Only mix what you anticipate using within 20 to 30 minutes, as the epoxy will harden quickly. Mix until the mixture achieves a uniform gray color and a putty-like consistency. Avoid mixing the components within their original containers. Use the putty knife to spread the mixed epoxy evenly onto any areas that require repair, pressing it into cracks and divots. Level and smooth the patched areas using the putty knife. Once all problem areas are patched, allow the repair to cure for 8 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J8sSWX0FblQ</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11130-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UdolrDw4GUs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair Damaged Concrete — Garage Floor Painting</video:title>
      <video:description>After degreasing and rinsing, check the floor for any damaged areas, such as cracks or holes. Use Rust-Oleum EpoxyShield Concrete Patch &amp; Repair to fill and smooth these imperfections. Ensure the patched areas are fully cured according to the product&apos;s instructions before proceeding to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UdolrDw4GUs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11130-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OZtbMa9VUt0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch and Repair the Concrete — Garage Floor Painting</video:title>
      <video:description>After the floor has completely dried from etching, it&apos;s time to repair any cracks or holes. Using a wire brush, ensure all remaining dirt and debris are removed from the cracks. For mixing the two-part Rust-Oleum Concrete Patch &amp; Repair epoxy, you will need a clean piece of cardboard and a putty knife. Mix the epoxy according to the package directions, ensuring you only mix what you&apos;ll use within 20 to 30 minutes, as the epoxy will harden quickly. Use the putty knife to spread and level the mixed epoxy evenly over all damaged areas. Once applied, allow the epoxy to dry completely according to the package directions. Once the patched spots are totally dry, your floor is ready for the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OZtbMa9VUt0</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11131-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CBh0fP__ve0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Etch the Concrete Surface — Garage Floor Painting</video:title>
      <video:description>Concrete etching is a critical step, especially for smooth, troweled concrete surfaces like garage floors, as it creates a textured profile that allows paint to adhere properly. It is also recommended for rough finishes. Use Seal-Krete Clean-N-Etch for this process; a half-gallon typically covers about 400 square feet. Work in manageable 10-foot by 10-foot sections. First, dampen the surface with water. Then, apply the Clean-N-Etch solution using a pump sprayer or a watering can. Immediately scrub the solution into the surface with a stiff-bristled broom until the foaming action stops, which indicates the etching process is complete. Thoroughly rinse the surface with a strong stream of water, continuing to scrub to ensure all material is removed. After drying, the surface should feel rough, similar to 150-grit sandpaper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CBh0fP__ve0</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11131-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TablS2U_Vqs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Concrete Etcher — Garage Floor Painting</video:title>
      <video:description>After cleaning, etch the concrete surface to create a rough texture, which significantly improves paint adhesion. Mix 1 kilogram of White Knight Ultra Pave Concrete Etcher granules with 10 liters of clean water in a 5-gallon bucket. Use a stirring stick to mix until the granules are completely dissolved. Carefully pour the mixed etcher into a watering can for uniform application across the floor. This environmentally friendly etcher is a safer alternative to traditional hydrochloric (muriatic) acid.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TablS2U_Vqs</video:player_loc>
      <video:duration>158</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11131-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/35tjXNu2hjc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Etching — Garage Floor Painting</video:title>
      <video:description>Mix the provided etch powder from the kit into water in a bucket. Pour the etch solution into a watering can for even distribution. Pre-wet the floor with water, then apply the etch solution evenly over the entire floor using the watering can. Work the etch solution into the concrete surface with a stiff-bristle broom. The solution may fizz, indicating it&apos;s reacting with the concrete. Once the fizzing stops, hose off the solution and rinse thoroughly. Use a rubber floor squeegee or a wet/dry vacuum to remove any excess water from the surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/35tjXNu2hjc</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11132-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-kJPJJO7KSE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Concrete Primer — Garage Floor Painting</video:title>
      <video:description>Once the primer is mixed, begin by &apos;cutting in&apos; the edges of the floor where it meets the taped walls and garage door using a paintbrush. After the edges are painted, pour the remaining primer directly onto the concrete floor and use a roller with an extension pole to spread it evenly across the entire surface. Ensure thorough and uniform coverage. Only one coat of primer is typically needed, and it should dry within a couple of hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-kJPJJO7KSE</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11132-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OZtbMa9VUt0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime the Floor — Garage Floor Painting</video:title>
      <video:description>If your garage floor was previously sealed, you will need to apply Rust-Oleum Concrete &amp; Garage Recoat Primer. If you have bare concrete, priming is not needed. First, mask off the baseboards and any other areas you don&apos;t want painted with painter&apos;s tape. Begin priming by trimming the edges of the floor with a small paint brush, working in 4 ft by 4 ft sections. Always start at the back of the garage and work your way out to avoid painting yourself into a corner. Before using the roller, de-lint your high-quality 3/8-inch nap roller by passing it back and forth over a wide piece of painter&apos;s tape to remove any loose particles. Then, use the roller to apply the primer to the main floor area in a &apos;W&apos; and &apos;M&apos; pattern to ensure even coverage and avoid lap lines. Do not allow the product to puddle, and maintain a wet edge as you work. If your concrete is really worn or porous, ensure the paint is applied into all the crevices of the surface. Continue until the entire floor is completely primed. Only one coat is needed for the garage coating to adhere effectively. Allow the primer to dry for a minimum of 6 hours, but no more than 48 hours, before applying the topcoat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OZtbMa9VUt0</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11132-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mYepHEhFVI0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Primer Coat — Garage Floor Painting</video:title>
      <video:description>Begin by cutting in along the edges of the garage walls using the Anvil cut-in blade or cardboard guard to create a clean line. Once the edges are done, start applying the diluted primer coat to the rest of the floor, working your way out of the garage. Ensure even coverage with the 1/4&quot; nap roller. This first coat will provide a good base for the final topcoat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mYepHEhFVI0</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11133-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OZtbMa9VUt0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Rust-Oleum Concrete &amp; Garage Floor Paint — Garage Floor Painting</video:title>
      <video:description>Once the primer has completely dried, you are ready to apply the main garage coating. Use protective gloves. Open the can of Rust-Oleum Concrete &amp; Garage Floor Paint + Primer with a paint can opener. Stir the paint thoroughly with a stir stick. If you are using more than one gallon of paint, mix all cans together in a bucket to ensure color uniformity across your entire floor. Pour the stirred paint into a paint tray. Starting from the back of the garage, use a good paint brush to cut in the edges of a 4 ft by 4 ft section, allowing you to avoid getting paint on your walls. Then, use a good quality 3/8-inch nap roller to roll the paint onto the floor in the same 4 ft by 4 ft section. If you like the look of decorative color chips, add them as you paint each section by tossing them into the air and letting them fall evenly onto the wet coating. Leave a 6- to 12-inch section of wet film without chips; this area will get covered when the next section is coated. Continue cutting in and applying the paint across the back wall and working your way forward, maintaining a wet edge to prevent any gloss differences. Let the floor dry for 24 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OZtbMa9VUt0</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11133-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UCk8hiatWh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint the Main Garage Floor Area — Garage Floor Painting</video:title>
      <video:description>After painting the edges, Pirulo loads the roller with the &apos;Slate Gray&apos; epoxy paint from the paint tray. He uses an extendable pole attached to the roller to reach across the floor comfortably. He advises starting from the back of the garage and working towards the garage door to avoid painting oneself into a corner. Pirulo systematically rolls the paint across the entire floor, ensuring even coverage and a smooth finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UCk8hiatWh4</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11133-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DRzQsSTe-p8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Epoxy Base Coat and Optional Deco-Flakes — Garage Floor Painting</video:title>
      <video:description>Start the application by using a mini roller and a brush (like the Purdy 2.5&quot; XL Glide) to &apos;cut in&apos; the edges, corners, and baseboards of your garage floor. This creates a clean border. For the larger areas of the floor, use a 3/8&quot; nap roller (e.g., Purdy Marathon or White Dove) attached to a heavy-duty 9-inch roller frame with a sturdy extension pole. Work in small sections, approximately 4 feet by 4 feet at a time, to ensure even coverage and to keep a wet edge. If you plan to use H&amp;C Deco-Flakes, broadcast them onto the wet epoxy immediately after coating each 4&apos;x4&apos; section by tossing them upward into the air to achieve even distribution. H&amp;C offers flakes in four unique color blends for customization. Always leave a wet edge on each section so you can continually roll without disturbing the already applied deco-flakes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DRzQsSTe-p8</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11134-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6xhG-SKRR5A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Coat of Paint — Garage Floor Painting</video:title>
      <video:description>After the first coat of paint has thoroughly dried according to the manufacturer&apos;s instructions, apply a second coat. Again, use a paint roller with an extension pole for the main areas and a paintbrush for the edges and hard-to-reach spots. This second coat provides enhanced durability, color consistency, and a more uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6xhG-SKRR5A</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11134-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y4-TCtppbxE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Coat of Paint (If Needed) — Garage Floor Painting</video:title>
      <video:description>After the first coat of paint has thoroughly dried (check manufacturer&apos;s recommendations, usually 2-4 hours), apply a second coat if desired or necessary. A second coat enhances durability, provides better color uniformity, and often achieves the desired protective qualities. Use the same application techniques with the stiff-bristled brush and thick-nap roller as for the first coat, ensuring all textured areas are fully covered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y4-TCtppbxE</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11134-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4THNUTAiFMI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Coat (with Drying Time) — Garage Floor Painting</video:title>
      <video:description>After the first coat has been applied, you will need to apply a second thin coat to build up the protective layer and enhance the gloss. It is critical to allow a minimum of a 6-hour drying period between the first and second applications. Ensure the first coat is dry to the touch before proceeding with the next application. If the instructions suggest more than two coats, follow the same procedure, allowing 6 hours of drying time between each subsequent coat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4THNUTAiFMI</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11135-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CgbDEQ7U8wM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drying and Curing — Garage Floor Painting</video:title>
      <video:description>After applying the paint and decorative flakes, it&apos;s crucial to allow adequate drying and curing time before subjecting the floor to traffic or weight. Allow at least 24 hours for light foot traffic. For heavy foot traffic or repositioning furniture, wait 72 hours. The paint requires a full 7 days to dry and cure sufficiently before it can be subjected to automotive tires. For optimal durability and to prevent damage, wait 30 days before washing the newly coated floor with a mild detergent.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CgbDEQ7U8wM</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11135-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UdolrDw4GUs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Epoxy to Cure — Garage Floor Painting</video:title>
      <video:description>After the epoxy coating and decorative chips have been applied, allow sufficient time for the floor to cure before resuming normal use. The surface should be ready for light foot traffic in approximately 12 to 16 hours. For heavy item placement, such as storage shelves or tools, wait 24 to 48 hours. Most importantly, allow the floor to cure for a full three days before parking vehicles on the surface. This ensures maximum durability and prevents hot tire pickup or damage to the coating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UdolrDw4GUs</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11135-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DRzQsSTe-p8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Epoxy to Dry and Cure — Garage Floor Painting</video:title>
      <video:description>After applying the clear top coat, allow the epoxy coating to dry for a minimum of 18 hours before walking on the surface. For full curing and maximum durability, you must allow 72 hours before parking vehicles on the coated floor. Adhering to these drying times is crucial to ensure the longevity and performance of your new garage floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DRzQsSTe-p8</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11125-1</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11125-2</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Install stair treads</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11125-3</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9OF3FBDsqcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stair Treads to Steps — Install stair treads</video:title>
      <video:description>With the treads unpacked, carefully position one stair tread onto the surface of a stair. Ensure it is centered and aligned properly. Once placed, firmly press down on the entire surface of the tread with your hands to activate the adhesive backing and secure it to the stair. Repeat this process for each step, ensuring consistent placement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9OF3FBDsqcs</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11124-1</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Stair Centerline — Install stair treads</video:title>
      <video:description>To ensure accurate and straight placement of the anti-slip treads, use masking tape to create a guideline. Place a strip of masking tape along the front edge of the stair tread. Next, measure the total width of the stair using a measuring tape. Divide this measurement in half to find the center point. Use a pencil to mark this center point directly onto the masking tape. Repeat for each stair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11124-2</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread Placement — Install stair treads</video:title>
      <video:description>To ensure accurate and consistent placement of each stair tread, the homeowner uses blue painter&apos;s tape to mark the desired position on the hardwood steps. A measuring tape is used to confirm precise spacing and alignment, ensuring a symmetrical reveal of the wood on both sides of each tread. This meticulous marking helps maintain a uniform and professional look across the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11124-3</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WjkM8ou_xoI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Stair Tread Placement — Install stair treads</video:title>
      <video:description>To ensure consistent and straight placement of the carpet treads, measure the desired distance from the edge of the stairs. Then, use blue painter&apos;s tape to create parallel guide lines up the entire staircase. This helps in visually aligning each tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WjkM8ou_xoI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11127-1</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11127-2</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/znk19ZAzezA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press and Secure Tiles — Install stair treads</video:title>
      <video:description>After placing each carpet tile onto the adhesive, firmly press down on its entire surface. This ensures maximum contact with the adhesive and helps to &apos;seat&apos; the tile properly, preventing air pockets and ensuring a strong bond. The worker in the video consistently presses down on the tiles with their hands or knees after placing them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/znk19ZAzezA</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11127-3</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V87S2MZ4sXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Firmly Secure Carpet to Wall — Install stair treads</video:title>
      <video:description>Once the carpet piece is positioned, the worker uses both hands to firmly press the carpet against the wall. He starts from the center of the carpet and systematically works his way outwards, applying even pressure across the entire surface. This action ensures maximum contact between the carpet backing and the adhesive, eliminating any trapped air bubbles and creating a strong, secure bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V87S2MZ4sXw</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11123-1</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Install stair treads</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11123-2</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11123-3</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Install stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11126-1</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Install stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11126-2</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Install stair treads</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11126-3</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stair Treads — Install stair treads</video:title>
      <video:description>Starting from the top of the staircase, the homeowner carefully installs each stair tread. She begins by peeling off the protective plastic film from the adhesive backing. The tread is then aligned precisely with the previously marked tape lines, ensuring the back edge is flush with the riser. Once aligned, she firmly presses the tread onto the step, making sure it adheres well, especially over the bullnose (the rounded edge of the step). This process is repeated for each individual stair tread and for the larger custom pieces on the landings. The homeowner notes that the adhesive is designed not to damage the existing hardwood stairs, making it a suitable option for temporary or non-permanent installations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11128-1</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sfgZWTtWnVc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Project Completion and Review — Install stair treads</video:title>
      <video:description>Once all stair treads are installed, take a step back and admire your work. The staircase should now have a consistent, aesthetically pleasing, and safer appearance. The video shows a person walking down the newly treaded stairs, demonstrating the finished look and feel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sfgZWTtWnVc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11128-2</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Review and Enjoyment — Install stair treads</video:title>
      <video:description>Once all stair treads are installed, step back and visually inspect the entire staircase. Check for uniform spacing, straight alignment, and secure adhesion of all treads. Walk up and down the stairs to ensure they feel stable and comfortable. The video showcases the completed staircase with all treads installed, demonstrating the aesthetic and functional improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11128-3</loc>
    <lastmod>2026-11-12T18:20:03.323Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Install stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:20:03.323Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11121-1</loc>
    <lastmod>2026-09-26T14:45:12.212Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — install carpet stair treads</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-26T14:45:12.212Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11121-2</loc>
    <lastmod>2026-09-26T14:45:12.212Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — install carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-26T14:45:12.212Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11121-3</loc>
    <lastmod>2026-09-26T14:45:12.212Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — install carpet stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-26T14:45:12.212Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11122-1</loc>
    <lastmod>2026-09-26T14:45:12.212Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — install carpet stair treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-26T14:45:12.212Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11122-2</loc>
    <lastmod>2026-09-26T14:45:12.212Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — install carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-26T14:45:12.212Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11122-3</loc>
    <lastmod>2026-09-26T14:45:12.212Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — install carpet stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-26T14:45:12.212Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11117-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z6IFlBoSwjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire Opener Motor, Control Panel, and Safety Photo Eyes — Garage Door Installation</video:title>
      <video:description>Proceed with wiring the motor unit of the garage door opener. This includes connecting wires for the wall-mounted control panel and the safety photo eyes. Safety photo eyes are critical safety features that have been standard for a long time; if a pet or child obstructs the beam while the door is closing, it will automatically reverse, preventing injury. Ensure all wiring connections are secure and follow the manufacturer&apos;s instructions for proper functionality.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z6IFlBoSwjU</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11117-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qba1pX9oWcc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Automatic Opener — Garage Door Installation</video:title>
      <video:description>To automate the newly installed garage door, connect the remote-control operator (e.g., Glidermatic GTS+ Optima Premium Tilt &amp; Sectional Door Operator). This typically involves mounting the operator unit to the ceiling or bulkhead above the door, connecting it to the torsion spring shaft or the door panels with an arm, and then plugging the unit into a nearby electrical outlet. Once powered, program the remote controls according to the manufacturer&apos;s instructions. Test the door&apos;s operation, ensuring it opens and closes smoothly and completely. The automatic opener allows for convenient remote operation of the garage door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qba1pX9oWcc</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11117-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Light Bulbs, Test, and Adjust Opener — Garage Door Installation</video:title>
      <video:description>Install the appropriate wattage light bulbs into the sockets on the motor unit and attach the light covers securely. Plug the garage door opener&apos;s power cord into a grounded electrical outlet. Once powered on, program the travel limits of the garage door (how far it opens and closes) and set the force limits (how much force the opener exerts). Use the wall control button and/or the remote control to test the opener&apos;s functionality. Finally, perform a safety reversal test by placing an object (like a 2x4 board) on the floor in the door&apos;s path. When the door closes and contacts the object, it should immediately reverse direction and open fully. This confirms the safety features are working correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11118-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ogJ3rOa1Xd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program Door Travel Limits — Garage Door Installation</video:title>
      <video:description>Program the garage door opener&apos;s travel limits (how far up and down the door should go). This is typically done by pressing specific buttons on the opener unit itself. The opener will then perform a cycle, moving the door up and down, automatically setting or allowing manual adjustment of its open and close positions. The video shows the door operating very quietly during this process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ogJ3rOa1Xd4</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11118-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2IYIo8ZDU_Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Travel Limits and Test Operation — Garage Door Installation</video:title>
      <video:description>After installation and programming, set the garage door&apos;s travel limits. This defines how far the door opens and closes. Locate the up, down, and set buttons on the motor unit. To set the down travel, press and hold the &apos;down&apos; arrow button until its indicator light blinks blue, then release. Allow the door to travel down, and once it reaches the desired closed position, press the &apos;set&apos; button. Repeat a similar process for the &apos;up&apos; travel limit. The presenter demonstrates how to move the trolley down the track using the motor buttons (press and hold the &apos;minus&apos; button until the blue light blinks, then release) to connect the garage door arm to the trolley. Perform several test cycles to ensure the door opens and closes smoothly, fully, and without obstruction. The presenter noted an issue with his door&apos;s original bracket placement which he corrected, leading to smoother operation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2IYIo8ZDU_Q</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11118-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rM12f0ZF7A0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program Travel Limits and Force — Garage Door Installation</video:title>
      <video:description>Plug the garage door opener into a power outlet. Press and hold the &apos;Set&apos; button on the opener&apos;s control panel until the LED display shows &apos;1&apos;. This indicates you are in closing limit adjustment mode. Use the &apos;Down&apos; button to slowly move the garage door down to your desired closed position. Press the &apos;Set&apos; button again; the display will now show &apos;2&apos;, indicating opening limit adjustment mode. Use the &apos;Up&apos; button to move the door to your desired open position. Press the &apos;Set&apos; button once more; the display will show &apos;3&apos;. Now, press the &apos;Wall Button&apos; or your remote control to initiate a full closing cycle. The opener will learn the closing force. Once the door is fully closed, the display will show &apos;4&apos;. Press the &apos;Wall Button&apos; or remote again to open the door, allowing the opener to learn the opening force. The opener will emit a beep sound when the programming is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rM12f0ZF7A0</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11119-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aOp5jmDBwSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Activate Opener&apos;s Learn Button — Garage Door Installation</video:title>
      <video:description>Immediately go to your garage door opener unit and quickly press and release its &apos;learn&apos; button once. The light on the opener unit should illuminate, indicating it is now in &apos;learning mode&apos; and waiting for a signal from the keypad. You typically have about 30 seconds to send this signal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aOp5jmDBwSI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11119-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0QKJkgTGCj4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program the New Keypad to the Opener — Garage Door Installation</video:title>
      <video:description>The first step in making your keypad operational is to program it to your garage door opener. Begin by locating the &apos;programming&apos; or &apos;learn code&apos; button on your garage door opener. These buttons are typically found on the bottom of the opener unit, facing the floor (often under the light bulb cover), or on the rear of the unit, facing away from the garage door. The video illustrates different types of programming buttons: some are square, others are labeled &apos;learn code&apos;. Once you activate the learn mode on your opener, you will have a 30-second window to complete the next steps. For openers with a square programming button (Type 1 or Type 4), press and hold it until the round LED turns blue; then release it, and a long LED will begin to flash purple. For openers with a &apos;learn code&apos; button (Type 2 or Type 3), simply press and release it once, and the red LED will begin to flash. Once your opener is in learn mode, immediately return to the wireless keypad. The existing factory default PIN for this keypad is &apos;3-5-7&apos;. Enter &apos;3-5-7&apos; on the keypad, then press the &apos;UP/DOWN&apos; key slowly, three to four times, until your garage door begins to move. This indicates that the keypad has successfully learned the opener&apos;s code.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0QKJkgTGCj4</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11119-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hTRXgOQS7A8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Garage Door Opener — Garage Door Installation</video:title>
      <video:description>To proceed with programming the keypad, you will need to access the garage door opener unit itself. Set up a ladder to safely reach the opener, which is typically mounted on the ceiling of the garage, so you can locate and press its &apos;learn button&apos;.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hTRXgOQS7A8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11120-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p3nKa3jRkgY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Door for Smooth Operation — Garage Door Installation</video:title>
      <video:description>Once the door sections, tracks, and springs are installed, manually test the door for smooth operation. Slowly open and close the door by hand, checking for any binding, sticking, or uneven movement. The door should move freely and balance properly when stopped at various points. Make any necessary adjustments to the track alignment or spring tension to ensure optimal performance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p3nKa3jRkgY</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11120-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H57kKA89LUM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Adjustments, Testing, and Cleanup — Garage Door Installation</video:title>
      <video:description>After all components are installed, the installers proceed with final adjustments and testing. The garage door opener is plugged in, and the door&apos;s operation is tested repeatedly to ensure smooth, quiet, and balanced movement. Any necessary adjustments to the opener&apos;s limits, force, or spring tension are made. The safety sensors are also tested to confirm they prevent the door from closing when an obstruction is detected. Once the door is fully functional, the installers clean both the interior and exterior surfaces of the garage door, removing any dust, fingerprints, or debris accumulated during installation. This final cleaning step ensures the door is ready for immediate use and presents a polished, professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H57kKA89LUM</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11120-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3GI2uS7Di6k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Test — Garage Door Installation</video:title>
      <video:description>With all installation and trim complete, perform a final test of the new garage door. Use the remote opener (like the Chamberlain brand remote shown) to activate the door. Observe carefully to ensure that the door opens and closes smoothly, travels fully and evenly along the tracks without any hitches or obstructions, and that the automatic opener motor functions correctly and quietly with the newly installed door. Confirm that the springs provide the appropriate balance and that all components work in harmony.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3GI2uS7Di6k</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11106-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GP-P16Fth40/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Rough Opening — Garage Door Installation</video:title>
      <video:description>Before installing the new door, it&apos;s critical to ensure the rough opening is properly prepared. Use a level to check that the subfloor is perfectly level. Then, check both side studs of the rough opening to ensure they are plumb (vertically straight). Finally, use a large framing square to verify that all four corners of the opening are square (90-degree angles). If any of these are not true, you will need to add wood shims or additional wood pieces to correct the rough opening to achieve a level, plumb, and square state.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GP-P16Fth40</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11106-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rxn0O4If7CI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Door Opening — Garage Door Installation</video:title>
      <video:description>Begin by thoroughly cleaning the floor area surrounding the door opening to ensure a clear workspace. Double-check the rough opening dimensions to confirm they are suitable for the new door. The rough opening should typically be approximately 1/2 inch taller and 3/4 inch wider than the overall outside dimensions of the new door frame. Use a level to ensure the floor is perfectly level and also check the rough opening itself for plumb (vertically straight) and square (all corners at 90 degrees).</video:description>
      <video:player_loc>https://www.youtube.com/embed/rxn0O4If7CI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11106-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IPrsoL_4apM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Analyze Rough Opening &amp; Floor Level — Garage Door Installation</video:title>
      <video:description>Before attempting to install the door, it&apos;s crucial to analyze the rough opening to ensure it&apos;s suitable. First, measure the width of the existing door at the header and the height of the frame. Then, measure the rough opening itself. Ideally, you want to have a 1/2 inch space for width to allow for adjustments to achieve perfect plumb, and a 1-inch space for height to accommodate future flooring and allow the door to be lifted. Next, use a 6-foot level (or a 4-foot level if a 6-foot is unavailable) to check the plumb of both sides of the rough opening in both directions. If the framing is perfectly plumb, you can maintain tighter tolerances. If it&apos;s significantly out of plumb, you may need to adjust the framing using tools like a sledgehammer or sawzall, adding shims or cutting plates to achieve the desired space and plumbness. Finally, check how level the floor is across the opening using a 2-foot level or a laser level. If new flooring is being installed, shim the door up with temporary shims to the exact thickness of the new flooring on the low side, then cut the jamb with an undercut saw once the new flooring is in. If installing over existing flooring, you might need to cut down the door frame accordingly based on how off-level the floor is.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IPrsoL_4apM</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11107-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qba1pX9oWcc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Install Garage Door Tracks — Garage Door Installation</video:title>
      <video:description>Upon receiving the custom garage door and its components, begin by assembling the side tracks. These tracks are typically made of galvanized steel and come in sections that need to be bolted together. Attach the horizontal arms to the assembled side tracks. This pre-assembly allows for easier installation when lifting the entire track system into place. Once assembled, lift the tracks and mount them securely to the vertical timber posts installed in Step 1. Use an impact driver to fasten the tracks firmly to the packers on the wall, ensuring they are level and properly aligned.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qba1pX9oWcc</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11107-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zuhbxSpQO_8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Rollers and Vertical Tracks — Garage Door Installation</video:title>
      <video:description>Insert the rollers into the top and bottom brackets and also into the tubes on each hinge. If a roller has two tubes, always place it in the tube farthest from the door. Next, assemble the jam brackets and flag brackets to the vertical track according to the instructions in your manual. With a helper supporting the door panels in place, carefully remove the temporary nails you toenailed in place on one side. Slide the vertical track over the rollers, ensuring all rollers are fully seated in the hinges, leaving approximately a half-inch gap between the edge of the door and the track. Do not force the track, as this could cause the door to bind. Pre-drill at each lag screw position and loosely attach the flag bracket and track brackets. The tops of both vertical tracks must be level with each other; verify this by measuring from the top of the door to the top of the bracket on both sides. Check that the tracks are plumb, then fully tighten the lag screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zuhbxSpQO_8</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11107-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p3nKa3jRkgY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Install Rollers and Track — Garage Door Installation</video:title>
      <video:description>Proceed to assemble and install the rollers into the hinges on the door sections, and then install the new track system. The track consists of vertical and horizontal sections that guide the rollers and allow the door to move smoothly. Carefully align the track sections and secure them to the garage framing using the appropriate hangers and fasteners. Ensure the track is plumb and level, and that the rollers move freely within them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p3nKa3jRkgY</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11108-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p3nKa3jRkgY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Stack Door Sections and Attach Hinges — Garage Door Installation</video:title>
      <video:description>With the bottom section prepared, begin stacking the door sections into the opening, starting from the bottom and working your way up. As each section is placed, secure it by attaching the hinges. These hinges will connect the individual door panels, allowing them to articulate as the door opens and closes. Carefully align each section and fasten the hinges using a drill and appropriate screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p3nKa3jRkgY</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11108-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xZwHOdI0QLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Middle Panels and Hinges — Garage Door Installation</video:title>
      <video:description>Install the remaining middle garage door panels one by one. For each middle panel, use self-tapping machine-thread lag screws to secure the center hinges. These screws are designed to bite into the metal backer within these panels, providing a strong attachment. With your helper, carefully lift and position each subsequent panel so its bottom edge rests on the top edge of the panel below it. The rollers on the ends of the newly installed panel will slide into the vertical tracks. Secure any remaining end hinges or brackets, sliding their rollers into the tracks. Ensure all panels are flush and properly aligned before tightening the screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xZwHOdI0QLc</video:player_loc>
      <video:duration>116</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11108-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H57kKA89LUM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assembling Door Panels and Hardware — Garage Door Installation</video:title>
      <video:description>The installers lay out the individual garage door panels on sawhorses. They then systematically attach hinges, rollers, and other essential hardware to each panel. This process involves using an impact driver to secure metal brackets at the section joints and for the rollers. One of the panels includes pre-installed windows. The bottom weather seal is also attached to the lowest panel, and a warning sticker is applied to a visible section of the door. The individual components are carefully unpacked and organized prior to assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H57kKA89LUM</video:player_loc>
      <video:duration>115</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11109-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xZwHOdI0QLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Bottom Panel and Install Vertical Tracks — Garage Door Installation</video:title>
      <video:description>With a helper, carefully carry the assembled bottom panel into the garage opening. Place the panel on the garage floor, ensuring it is centered within the door frame. Use a tape measure to verify equal spacing on both sides. Insert the bottom rollers into the pre-installed roller brackets on the panel. Then, position the vertical tracks on both sides of the door, wrapping them around the installed rollers. Loosely secure the vertical tracks to the wooden door frame using lag screws and a cordless drill. Do not overtighten these screws at this stage, as minor adjustments may be needed later. Ensure there&apos;s a slight gap between the track and the door panel to prevent friction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xZwHOdI0QLc</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11109-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zuhbxSpQO_8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Rollers and Vertical Tracks — Garage Door Installation</video:title>
      <video:description>Insert the rollers into the top and bottom brackets and also into the tubes on each hinge. If a roller has two tubes, always place it in the tube farthest from the door. Next, assemble the jam brackets and flag brackets to the vertical track according to the instructions in your manual. With a helper supporting the door panels in place, carefully remove the temporary nails you toenailed in place on one side. Slide the vertical track over the rollers, ensuring all rollers are fully seated in the hinges, leaving approximately a half-inch gap between the edge of the door and the track. Do not force the track, as this could cause the door to bind. Pre-drill at each lag screw position and loosely attach the flag bracket and track brackets. The tops of both vertical tracks must be level with each other; verify this by measuring from the top of the door to the top of the bracket on both sides. Check that the tracks are plumb, then fully tighten the lag screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zuhbxSpQO_8</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11109-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p3nKa3jRkgY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Install Rollers and Track — Garage Door Installation</video:title>
      <video:description>Proceed to assemble and install the rollers into the hinges on the door sections, and then install the new track system. The track consists of vertical and horizontal sections that guide the rollers and allow the door to move smoothly. Carefully align the track sections and secure them to the garage framing using the appropriate hangers and fasteners. Ensure the track is plumb and level, and that the rollers move freely within them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p3nKa3jRkgY</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11110-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CRkxQFAgUlc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Horizontal Tracks and Hangers — Garage Door Installation</video:title>
      <video:description>Install the horizontal track when stacking the top door section. Ensure the track hangers are made of material strong enough to support the entire weight of the door. The hangers must be securely screwed into a solid structural element (like ceiling joists or wall studs) that can adequately bear the door&apos;s weight. The presenter notes he had to drill a new hole in his track to accommodate existing hangers, indicating flexibility might be needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CRkxQFAgUlc</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11110-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xZwHOdI0QLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Horizontal Tracks — Garage Door Installation</video:title>
      <video:description>With the vertical tracks and most panels in place, install the horizontal tracks. These are typically curved sections that connect the top of the vertical tracks to horizontal supports extending into the garage. With the help of your partner and using ladders for safe access, lift each horizontal track section. Align the curved end with the top of the vertical track and screw them securely together using the appropriate fasteners. Repeat this process for both sides of the garage door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xZwHOdI0QLc</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11110-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zuhbxSpQO_8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Horizontal Tracks — Garage Door Installation</video:title>
      <video:description>Now, install the horizontal track. Slide the horizontal track over the roller. Attach the curved end of the track to the flag bracket using the supplied track bolts and flange nuts, ensuring the head of the bolt is on the inside of the track. Secure the end of the horizontal angle to the top of the flag bracket with a carriage bolt. Then, attach the opposite end of the horizontal track to the rear track hanger. In this example, an existing wooden structure was used as a hanger, but if you don&apos;t have one, rear track hanger kits are available. To ensure the horizontal track is perfectly square, measure diagonally from one corner of the track to the opposite diagonal side. Both diagonal measurements should be equal. Adjust the track&apos;s position if necessary to achieve squareness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zuhbxSpQO_8</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11111-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zuhbxSpQO_8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Torsion Spring System — Garage Door Installation</video:title>
      <video:description>Mount the torsion spring system. Begin by reading all safety information in the manual, as improper handling can lead to injuries. Attach the system&apos;s bracket to the flag bracket using the supplied carriage bolts. Complete this part of the installation by pre-drilling holes into the wooden jamb and fastening the bracket securely with lag bolts. Next, slide the spring onto the torsion tube and attach the winding unit. Depending on your door, you might have one or two torsion springs; if there are multiple, the ends of the springs and winding units will be color-coded to help match components. After the spring and winding unit, add the drums. Lift the entire assembly (spring, winding unit, drums on the torsion tube) and place it into the brackets. If your system includes a center support bracket (as shown in the video example), attach it now, ensuring it is straight and level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zuhbxSpQO_8</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11111-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H57kKA89LUM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing and Tensioning Torsion Springs — Garage Door Installation</video:title>
      <video:description>The torsion spring assembly, consisting of a metal shaft, drums, and heavy-duty springs, is mounted horizontally above the garage door opening. Using specialized winding bars, an installer carefully tensions the torsion springs. This is a highly critical and dangerous step, as the springs are placed under immense rotational force to counterbalance the weight of the garage door. The installer meticulously inserts and rotates the winding bars, tightening the springs turn by turn. Safety is paramount here, as improper handling of these high-tension springs can lead to severe injury.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H57kKA89LUM</video:player_loc>
      <video:duration>135</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11111-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BiCU_OoqOxk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Tension to First Torsion Spring — Garage Door Installation</video:title>
      <video:description>After releasing some tension, insert a winding bar into a hole in the winding cone and begin adding tension by making three quarter-turns. Rotate the bar in the appropriate direction to wind the spring tighter. Be careful not to over-tighten, as making the door too &apos;light&apos; can create new balance problems. Once the desired turns are added, use the second winding bar to hold the tension firmly in place while you tighten the set screws on the winding cone with an adjustable wrench or socket. Ensure the set screws are extremely tight to prevent the spring from unwinding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BiCU_OoqOxk</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11112-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h3yZvV7NGHQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Cables — Garage Door Installation</video:title>
      <video:description>Feed the new lift cable through the pulley fork, ensuring it is properly seated in the pulley&apos;s groove. Reattach the S-hook to its original position on the horizontal frame. Then, thread the other end of the cable (with the factory-made loop) down the vertical track and attach its loop around the bottom bracket of the door. Gently tug on the end not connected to the S-hook to ensure the cable is snug in the pulley groove. Repeat this entire process for the cable on the other side of the garage door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h3yZvV7NGHQ</video:player_loc>
      <video:duration>112</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11112-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fqQ6OT_w4v0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Route and Attach New Cable — Garage Door Installation</video:title>
      <video:description>Take the loop end of the new cable and attach it to the pulley system with the S-hook, ensuring it&apos;s securely in place. Then, feed the other end of the cable through the top of the garage door track and down to the bottom. Attach the bracket on the cut end of the cable to the bottom of the garage door, making sure the cable is taut. Repeat this process for the other side of the garage door if both cables are being replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fqQ6OT_w4v0</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11112-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/djiGJ7Ks_dQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Cables and Extension Springs — Garage Door Installation</video:title>
      <video:description>Install the garage door cables and extension springs. The cables are attached to the bottom of the door panels, run up along the vertical tracks, over pulleys mounted at the top, and then connect to the extension springs. These springs are stretched when the garage door is in the closed (down) position, providing counter-balance and making the door easier to lift. Due to the barn&apos;s structure, one side utilizes a longer cable to position the spring further back, indicating flexibility in spring placement based on available space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/djiGJ7Ks_dQ</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11113-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_uQrcy6wFWQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wind the Torsion Spring — Garage Door Installation</video:title>
      <video:description>Insert one proper winding bar into a hole on the spring&apos;s winding cone. Use the other winding bar to lever the spring upwards, applying tension by rotating the cone one quarter turn at a time. After each quarter turn, insert the first bar into the next available hole to maintain tension and switch the second bar to continue winding. Count each quarter turn carefully until you reach the calculated total (e.g., 34 turns for an 8-foot door). Ensure the winding bars are fully seated in the winding cone holes during this process to prevent slippage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_uQrcy6wFWQ</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11113-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vy7oLhlHnKo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wind First Torsion Spring — Garage Door Installation</video:title>
      <video:description>Using both winding bars, proceed to wind the first torsion spring. Insert one bar into an adjustment hole, apply upward pressure to lift the spring cone slightly, then insert the second bar into the next available adjustment hole. Carefully turn the spring cone a total of three quarter-turns (or 3/4 turn in total) in the direction that increases tension (typically upwards). After each quarter turn, remove the lower winding bar, then re-insert it into the next adjustment hole below the upper winding bar. This &apos;leapfrogging&apos; technique allows for controlled winding. Remember to maintain a firm grip and keep your body clear of the winding bars at all times.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vy7oLhlHnKo</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11113-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EtH5LU2jClI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wind the New Torsion Springs — Garage Door Installation</video:title>
      <video:description>Now, it&apos;s time to wind the new springs. Start by winding each spring one full turn by hand (which equals four quarter turns), ensuring the winding bar is fully inserted into the cone. Then, using two winding bars, continue adding tension to the spring. For a 7-foot door, you typically need to add 29 to 30 quarter turns; for an 8-foot door, it&apos;s 33 to 34 quarter turns. Always wind the spring in the UPWARD direction, regardless of whether it&apos;s a left or right-wound spring (the direction of the wind matters more than the side). Insert one winding bar completely, turn one quarter turn, then insert the second bar, remove the first, and repeat until the desired number of turns is achieved. After winding, securely tighten the set screws on the winding cone using the 7/16-inch 12-point socket and ratchet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EtH5LU2jClI</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11114-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JZHY11xw_xc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Front Bracket — Garage Door Installation</video:title>
      <video:description>Mount the front bracket (header bracket) to the wall above the garage door. The narrator had to cut out a section of pegboard and install a 2x4 stud behind it to provide a solid mounting surface, as the original location for the old opener was not suitable for the new unit. The bracket must be securely fastened to a structural element (like a wooden header or stud) to support the weight and forces of the garage door operation. The specific placement of this bracket will depend on your garage&apos;s construction and door height, so refer to your opener&apos;s manual for precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JZHY11xw_xc</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11114-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Door Bracket and Motor Unit Ceiling Mounts — Garage Door Installation</video:title>
      <video:description>Install the emergency release cord and attach the door bracket to the top panel of the garage door. The door bracket connects the door to the opener&apos;s trolley. Mount the motor unit to the ceiling using the adjustable hanger brackets, ensuring the entire rail system is level and properly aligned with the garage door tracks. Secure these brackets into ceiling joists or a sturdy mounting board. Use a wrench or socket to tighten all bolts on the hanger brackets securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11114-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dpyz32i5mQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Opener Unit and Track — Garage Door Installation</video:title>
      <video:description>Attach the new opener&apos;s track to the existing top bracket above the garage door opening, securing it with the provided hardware. Then, lift the main opener unit and align it with the ceiling support brackets, securing it in place with bolts. The existing ceiling support brackets can be reused, reducing installation time and effort. Connect the motor unit to the track.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dpyz32i5mQY</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11115-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ogJ3rOa1Xd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Rail to Motor Unit — Garage Door Installation</video:title>
      <video:description>Attach the assembled rail to the main garage door opener motor unit. This involves aligning the end of the rail with the designated slot on the motor unit and securing it with screws using a power drill. This forms the core assembly of the opener.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ogJ3rOa1Xd4</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11115-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tl_sDahKZbg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Header Bracket and Connect Rail — Garage Door Installation</video:title>
      <video:description>Align the header bracket with the pre-drilled holes and insert the provided lag bolts. Use a socket wrench to tighten the lag bolts securely, ensuring the bracket is firmly attached to the header board. Once the header bracket is installed, connect the rail of the garage door opener to it using the provided pin and locking mechanism.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tl_sDahKZbg</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11115-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wehde081FFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Header Support and Attach Rail — Garage Door Installation</video:title>
      <video:description>Install the new header bracket for the rail system. This bracket is typically mounted to a sturdy wooden header above the garage door opening. Use a drill to create pilot holes and then securely fasten the bracket. Next, lift the assembled rail system with the motor head attached and connect the front end of the rail to the newly installed header bracket. This is best done with two people for safety and stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wehde081FFk</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11116-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wehde081FFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Garage Door Arm to Trolley — Garage Door Installation</video:title>
      <video:description>Attach the garage door arm from the door itself to the trolley mechanism on the opener&apos;s rail. This arm connects the door to the opener, allowing it to move up and down. Ensure the arm is properly aligned and securely fastened to both the door bracket and the trolley according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wehde081FFk</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11116-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dpyz32i5mQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Lifting Arm to Door — Garage Door Installation</video:title>
      <video:description>Connect the lifting arm to the trolley, which moves along the track, and then attach the other end of the arm to the top bracket of the garage door itself. Ensure all connections are secure and allow for smooth movement of the door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dpyz32i5mQY</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11116-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ogJ3rOa1Xd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Door Arm to Garage Door — Garage Door Installation</video:title>
      <video:description>Connect the curved and straight door arms to the garage door and the carrier. The video shows connecting the curved arm to the carrier with a pin and clip, and then attaching the straight arm to the garage door&apos;s top panel using bolts. Ensure the arm forms an appropriate angle for proper door operation, typically between 90 and 120 degrees when the door is closed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ogJ3rOa1Xd4</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11102-1</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — measure stairs</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11102-2</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measure stairs</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11102-3</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure stairs</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11104-1</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure stairs</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11104-2</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measure stairs</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11104-3</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — measure stairs</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11105-1</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure stairs</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11105-2</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — measure stairs</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11105-3</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — measure stairs</video:title>
      <video:description>Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11103-1</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11103-2</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure stairs</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11103-3</loc>
    <lastmod>2026-11-15T19:55:33.629Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — measure stairs</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-15T19:55:33.629Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11095-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aEV1OoGKBpE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Gutter Pitch Line — Gutter Installation</video:title>
      <video:description>Establish a reference line on the house to ensure the gutter is installed with the correct pitch. A common mistake is hanging the gutter too high. Position a level against the roofline to represent the imaginary line where water runs off. The front edge of the gutter should be below this line (approximately 1 inch) to prevent ice buildup from damaging it in winter. Mark the high side of the gutter&apos;s position, where the water will start its flow, and gently tap a nail into the fascia board. Attach a chalk line to this nail. Then, move to the opposite end (the low side) where the downspout will be, and, by &apos;eyeballing&apos; the end cap&apos;s position approximately 1 inch lower than the high side (or roughly 1/16 inch drop per foot of run), attach the chalk line. Verify the pitch using the level to ensure proper drainage before snapping the chalk line, creating a clear guide for installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aEV1OoGKBpE</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11095-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l-F7XiPqR2E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine and Mark Gutter Slope — Gutter Installation</video:title>
      <video:description>To ensure proper drainage, the gutter needs a slight slope. Start by attaching a string line to one end of the fascia board where the gutter will be installed. Run the string line to the other end, allowing for a slight slope, approximately a half-inch drop over the length of the gutter. Once the desired slope is achieved, snap a chalk line along the fascia board to mark the top edge of where the gutter will be mounted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l-F7XiPqR2E</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11095-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wm5OoWaeLJs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Gutter Slope and Hanger Locations — Gutter Installation</video:title>
      <video:description>Begin by marking the starting and ending points for the gutter run on the building. It&apos;s crucial to establish a proper slope for drainage; the recommendation is at least 1/4 inch of drop for every 10 feet of gutter length. After marking the overall gutter line, use a marker and a level to precisely mark the locations where each gutter hanger will be installed along the marked slope. The presenter recommends marking the screw holes for the hangers at the same time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wm5OoWaeLJs</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11096-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/COp2Kh0kp2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Gutter Hangers — Gutter Installation</video:title>
      <video:description>After your gutter sections are fully assembled with end caps and downspout connections, it&apos;s time to prepare the hangers. These hangers are designed to slip under the front lip of the gutter and then slide over the back, with a screw securing them to the fascia. It&apos;s often easier to loosely space out and install the hangers onto the gutter sections while they are still on the ground, before lifting them onto the house. This avoids wrestling with the roof and drip edge later. Aim for hangers every 2-3 feet for adequate support.</video:description>
      <video:player_loc>https://www.youtube.com/embed/COp2Kh0kp2c</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11096-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wZ4TSisTxhk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Robust Gutter Hangers — Gutter Installation</video:title>
      <video:description>For reinforcement or new installations, use professional-grade gutter hangers that clip onto the front and back of the gutter and secure into the fascia board with a screw. These hangers are significantly more robust than traditional spike and ferrule systems. Position these hangers approximately every 16 inches along the gutter length, or closer for extra strength in areas with heavy loads. This method provides superior holding power, ensuring the gutter remains firmly attached and properly aligned against the fascia board.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wZ4TSisTxhk</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11096-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aEV1OoGKBpE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Gutter and Hangers — Gutter Installation</video:title>
      <video:description>Lift the gutter into position using two ladders, one for each end, with an assistant. Temporarily secure the gutter about 2 inches lower than the chalk line you marked earlier. This temporary positioning allows you to easily install the gutter hangers. The hangers (Berger brand shown) are designed to hook into the front lip of the gutter and then screw into the back of the fascia board, directly into the rafter tails for maximum strength. Because the gutter is temporarily lowered, you can easily hook the front of the hanger and bend it into place without hitting the roof shingles. Once all hangers are hooked, reposition the gutter upwards so that its top edge aligns with the chalk line. Use a cordless drill and screws to secure each hanger by driving the screw into the rafter tails through the hanger&apos;s designated hole. Space the hangers appropriately, typically every 2-3 feet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aEV1OoGKBpE</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11097-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aEV1OoGKBpE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure, Seal, and Cut Gutter — Gutter Installation</video:title>
      <video:description>Measure the total length required for the gutter section using a measuring tape from the high point nail to the low point where the downspout will be. For example, if the measurement is 25 feet 11 inches, round up to 26 feet for material procurement. Next, take one end cap and apply a bead of gutter sealant (such as a polyurethane or butyl-based caulk designed for gutters) to its inner crack. Press the end cap firmly onto one end of the gutter. To permanently secure the end cap and ensure a watertight seal, use a crimping tool (also known as a gutter crimper or hand seamer) to create small divots along the edges where the end cap meets the gutter. This mechanical connection prevents the end cap from detaching. Finally, cut the gutter to the measured length. Start with a hacksaw for the initial cut and finish with snips for a clean edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aEV1OoGKBpE</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11097-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cJGJOc_AigQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cutting and Assembling Gutter Sections — Gutter Installation</video:title>
      <video:description>Before mounting the full gutter sections, cut the guttering pieces to the required lengths using a hand saw. For example, if an end cap is needed, use it to mark the precise cut location. Once cut, attach any necessary end caps, internal corner pieces, or joint pieces. When attaching end caps, ensure they are hooked onto the guttering and then teased into place, finally clipping them securely. Double-check that all rubber seals within connectors are properly seated to prevent future leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cJGJOc_AigQ</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11097-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Dbuv4W_EFmU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Join Additional Gutter Sections — Gutter Installation</video:title>
      <video:description>For longer gutter runs, you may need to connect multiple straight sections. If a section needs to be shorter, use a hacksaw to cut it to the appropriate length. When joining two straight pieces, use a joint connector in the same manner as connecting a corner. It is highly recommended to place an extra hanger directly at or very close to each joint to provide added support and prevent sagging, especially for vinyl gutters which can be more flexible than metal. Once the joint is secure, install hangers as per previous steps, and finally, attach an end cap if it is the end of a gutter run.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Dbuv4W_EFmU</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11098-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/COp2Kh0kp2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Gutter on House and Test — Gutter Installation</video:title>
      <video:description>With your guide line established, carefully lift the assembled gutter section into place. Slide the gutter hangers into position, ensuring they line up with the rafter tails of the house for solid support. Secure each hanger by driving a screw through it and into the fascia board, following your marked slope line. Once all hangers are screwed down, test the entire gutter system&apos;s function with a garden hose. Run water through the gutter to check for proper drainage towards the downspout and to ensure there are no leaks at any of the joints or end caps. Make any necessary adjustments or apply additional sealant if leaks are found.</video:description>
      <video:player_loc>https://www.youtube.com/embed/COp2Kh0kp2c</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11098-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/O1YArrbAkDI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Gutters to Fascia — Gutter Installation</video:title>
      <video:description>Once fabricated, the long sections of seamless gutter are carefully lifted into position along the eaves of the house. This often requires multiple workers and the use of ladders to maneuver the lengthy gutters. The gutters are then mounted to the fascia board using a cordless drill and specialized gutter fasteners (such as hidden hangers or spikes). It is crucial to ensure the gutter has a slight slope (typically 1/4 inch per 10 feet) towards the downspout outlets to facilitate proper drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/O1YArrbAkDI</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11098-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uw0bJzOzLgs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fit Guttering Sections — Gutter Installation</video:title>
      <video:description>Now, fit the first section of guttering. Hold the guttering at an angle, tilting it to hook the back edge securely under the back clip of the fascia brackets. Once the back is engaged, rotate the guttering forward and snap the front edge into place, ensuring it is firmly seated in the front clips. Repeat this process for all subsequent guttering sections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uw0bJzOzLgs</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11099-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/O1YArrbAkDI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Downspouts — Gutter Installation</video:title>
      <video:description>The final step in the gutter installation process is to attach the downspouts. This involves connecting downspout elbows and straight sections to the outlet holes in the newly installed gutters. The video shows a worker connecting a white downspout elbow piece to the gutter. Downspouts are typically crimped and secured with screws to ensure a tight, leak-free connection, directing rainwater safely away from the building&apos;s foundation. Additional sections and extensions may be added as needed to guide water to a proper drainage area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/O1YArrbAkDI</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11099-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/COp2Kh0kp2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Downspouts and Finalize Drainage — Gutter Installation</video:title>
      <video:description>The final step is to install the downspouts. Use a combination of downspout elbows and straight sections to bring the downspout from the gutter connection back towards the exterior wall of the house and down to the ground. Measure and cut downspout sections as needed using an angle grinder with a metal cut-off wheel. Secure the downspout to the house with downspout straps, typically placed every few feet down the length of the downspout.   Consider adding a rain barrel collection system to conserve water by directing the downspout into a rain barrel. Alternatively, ensure the downspout extends far enough from the foundation to prevent water from pooling and causing erosion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/COp2Kh0kp2c</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11099-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yHYi-RKHcPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Downspouts and Brackets — Gutter Installation</video:title>
      <video:description>Downspouts are connected to the previously installed downspout outlet. The connection typically involves an elbow piece, then a vertical downspout section, followed by another elbow, and finally a horizontal piece to direct water away from the house. All connections should be made using self-tapping screws with enameled heads, and these screws should be placed on the top side of the downspout connections to prevent leaks. Vertical downspout sections are secured to the house wall using downspout straps/brackets, which are screwed into the siding. The narrator explains that directing water down the roof slope is acceptable as the shingles are designed to handle rainwater.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yHYi-RKHcPY</video:player_loc>
      <video:duration>221</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11100-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gLLEzQ7yerc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Gutter Joints — Gutter Installation</video:title>
      <video:description>The final critical step is to seal all the joints and seams within the gutter system to prevent leaks. Apply a generous amount of gutter sealant along the internal seams where two gutter sections meet, particularly focusing on the bottom and sides of the connection. The sealant, which appears to be a thick, grey, possibly cement-based or silicone product, should create a watertight bond. Allow the sealant to cure according to manufacturer instructions, then perform a water test by pouring water into the gutter to confirm that there are no leaks from the sealed joints.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gLLEzQ7yerc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11100-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nkFf5r7dtF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Leaks and Enhance Gutter Appearance — Gutter Installation</video:title>
      <video:description>After cleaning and ensuring proper pitch, it&apos;s time to fix any leaks in your gutters. For the best results, make sure your gutters are completely dry before applying any sealant. Wearing gloves, run a continuous bead of gutter sealant over any seams or suspected leak areas. The video shows a tube of GS121 Gutter Sealant being applied with a caulk gun. While you&apos;re up there, it&apos;s a good idea to clean the exterior of your gutters with a sponge to improve their appearance. Additionally, you can touch up your gutters and downspouts with a little paint if they have any chips or faded areas, using a small paintbrush for precision.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nkFf5r7dtF8</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11100-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e8ZtL7dT_DQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Gutter Seams and End Caps — Gutter Installation</video:title>
      <video:description>Once the gutters are reinforced and properly aligned, the final step is to seal any potential leak points. This involves applying a high-quality gutter sealant, such as Gutter Seal 2321, to all seams, miters (corner joints), and end caps. The presenter emphasizes using the strongest sealant available to ensure a watertight and long-lasting repair. The company guarantees their work for life, provided the gutters are regularly cleaned and maintained by either the homeowner or a professional service.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e8ZtL7dT_DQ</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11101-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EVUUpLmhWT8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Gutter Drainage — Gutter Installation</video:title>
      <video:description>Once all gutter sections and downspout components are installed, perform a water test. Use a garden hose to run water into the gutter. Observe the water flow to ensure it drains effectively towards and down the downspout. Check all sealed joints and end caps for any leaks. Make any necessary adjustments to the gutter slope or add more sealant to leaking areas if detected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EVUUpLmhWT8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11101-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l-F7XiPqR2E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks and Proper Drainage — Gutter Installation</video:title>
      <video:description>Once all gutter and downspout components are installed, it&apos;s crucial to test the system. Use a water source, such as a garden hose, to spray water directly onto the shed&apos;s roof. Observe the water flow as it travels down into the gutter and through the downspout. Check for any leaks along the gutter seams, end caps, and downspout connections. Confirm that the water flows efficiently through the downspout and is directed away from the shed&apos;s foundation, ensuring there are no blockages or overflows.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l-F7XiPqR2E</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11101-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FikqUsYSKeM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Rainwater Collection System — Gutter Installation</video:title>
      <video:description>Once the gutter and downspout are fully installed and secured, pour water onto the corrugated roof with a watering can or garden hose. Observe the water flow into the gutter, down the downspout, and into the collection barrel to ensure there are no leaks and that the system functions as intended.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FikqUsYSKeM</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11079-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xWSd0GfZSEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Wood Surface — Wood Staining</video:title>
      <video:description>After sanding, thoroughly clean the wood surface to remove all dust and debris. Use a tack cloth to wipe down the entire piece, ensuring it is completely dry and free of any particles that could interfere with stain application. You can also use a vacuum cleaner or a clean rag/paper towel as alternatives to a tack cloth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xWSd0GfZSEc</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11079-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dlm66l0dxb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Wood Surface — Wood Staining</video:title>
      <video:description>Before applying any stain, thoroughly prepare the wood surface. Take a tack cloth and rub it over the entire project. This action is crucial for picking up any loose particles, dust, or debris that might be present on the wood. A clean surface ensures that the stain will be absorbed evenly and take to the wood much better, preventing blotches or an uneven finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dlm66l0dxb4</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11079-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vrx6-j4GAFI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Wood Surface — Wood Staining</video:title>
      <video:description>Before applying the stain, it is crucial to ensure the wood surface has been properly cleaned and prepared. This foundational step removes dirt, grime, mildew, and any previous finishes, creating a clean and porous surface that allows the stain to penetrate evenly and adhere effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vrx6-j4GAFI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11080-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ogKRX_MNBxo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand the Wood — Wood Staining</video:title>
      <video:description>Begin by thoroughly sanding the wood. The quality of the finish heavily relies on proper preparation, primarily sanding. Start with 80-grit sandpaper to remove rough material and imperfections from the entire project piece. This initial sanding stage typically takes the longest. Once the wood is sufficiently smoothed with 80-grit, move on to 120-grit or 150-grit sandpaper, followed by a final sanding with 220-grit sandpaper to achieve a very smooth finish. As you increase the grit number, the sandpaper becomes finer, resulting in a smoother surface with less material removed. Use an orbital palm sander for most projects. For smaller, lighter projects, a sanding block can be sufficient, while a belt sander is useful for heavy sanding tasks. Always wear goggles to protect your eyes from sawdust, and a face mask is also recommended.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ogKRX_MNBxo</video:player_loc>
      <video:duration>108</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11080-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vfeAxUfoEdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Proper Sanding for Stain Application — Wood Staining</video:title>
      <video:description>Before applying any stain or finish, thoroughly sand the wood surface. Begin with an 80-grit sandpaper to remove any major scratches or imperfections. Progress to 120-grit sandpaper to refine the surface and remove marks left by the coarser grit. Finish sanding with 220-grit sandpaper to achieve a smooth texture. This process not only removes blemishes but also helps to open up the wood&apos;s pores, preparing them for better stain absorption.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vfeAxUfoEdE</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11080-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xWSd0GfZSEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Wood Surface by Sanding — Wood Staining</video:title>
      <video:description>Begin by sanding the wood surface to create a smooth, even surface, remove any protective coating, and open the wood pores for better stain penetration. If the wood is very rough, start with 80 or 120 grit sandpaper. Always finish with 220 grit sandpaper, as this is the ideal grit before staining. Sand in the direction of the wood grain using an orbital sander for faster, more consistent results. Alternatively, you can sand by hand using sandpaper sheets or sanding blocks. Once sanding is complete, the wood should feel smooth to the touch.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xWSd0GfZSEc</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11081-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0SZZqg00Zok/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Pre-stain Conditioner (for Softwoods) — Wood Staining</video:title>
      <video:description>If you are staining softwood, such as pine, it is highly recommended to apply a pre-stain conditioner first. This product helps to even out the wood&apos;s porosity, preventing the stain from absorbing unevenly and causing blotchy results.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0SZZqg00Zok</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11081-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xWSd0GfZSEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Pre-Stain Wood Conditioner — Wood Staining</video:title>
      <video:description>Apply pre-stain wood conditioner to the wood. This is a crucial step to prevent blotchiness and ensure that the stain absorbs evenly across the wood surface, especially with softwoods like pine. Before applying, thoroughly stir the wood conditioner with a stir stick to ensure all components are well mixed. Apply the conditioner using a foam pad, wiping it in the direction of the wood grain. Observe as the conditioner soaks into the wood, preparing the fibers to receive the stain uniformly. Allow the conditioner to sit for 5-15 minutes, but not longer than 2 hours, before applying the stain, as per product instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xWSd0GfZSEc</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11081-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EN8iLDztUmY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Pre-Stain Wood Conditioner — Wood Staining</video:title>
      <video:description>After cleaning, apply a pre-stain wood conditioner to the wood. It is crucial to match the conditioner type to your stain; if you are using an oil-based stain, select an oil-based pre-stain wood conditioner. The video shows Minwax Pre-Stain Wood Conditioner, which is oil-based. This conditioner helps to normalize the wood&apos;s absorption rate, which can vary significantly between different wood species or even within the same piece of wood. By doing so, it prevents blotchiness and ensures a more uniform, smooth finish when the stain is applied. This step takes only a few extra minutes but makes a significant difference in the final appearance of your project.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EN8iLDztUmY</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11082-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TTliO-UC-j0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply the Wood Stain — Wood Staining</video:title>
      <video:description>Don protective gloves to protect your hands from the stain. You can apply the wood stain using a shop rag, a bristle brush, or a foam brush. The presenter recommends a shop rag for ease of use. Apply the stain by rubbing it into the wood in a circular motion to ensure proper absorption and penetration into the wood fibers. Immediately after applying, wipe up any excess stain from the surface, always moving in the direction of the wood grain. The particular &apos;Varathane&apos; brand stain used in the video can achieve the desired color depth and richness in just one coat, unlike many other stains that require multiple layers. This allows for faster and more efficient project completion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TTliO-UC-j0</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11082-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s88ljYuOetI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stain — Wood Staining</video:title>
      <video:description>After preparing the wood, thoroughly stir the wood stain. Apply the stain using a slightly wet cloth or rag, ensuring to work it into the wood grain. Apply the stain in thin, even coats, gradually building up to achieve your desired shade. Remember to protect your work surfaces with drop cloths to prevent staining. Once the desired color is achieved and before the stain dries, remove any excess stain by wiping it off in the direction of the grain with a clean, dry cloth. Be careful not to over-apply, as too much stain can leave dark, uneven patches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s88ljYuOetI</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11082-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0SZZqg00Zok/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply the First Coat of Stain — Wood Staining</video:title>
      <video:description>Using a lint-free rag or a foam brush, apply the wood stain to your project. Always apply the stain by moving the rag or brush with the wood grain. This ensures the stain penetrates evenly and highlights the natural patterns of the wood.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0SZZqg00Zok</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11083-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DVOtEbrs4eg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Stain to Dry — Wood Staining</video:title>
      <video:description>After wiping off all excess stain and allowing for any seepage to be removed, the stained cabinet door needs to dry completely. For Minwax stains, the minimum drying time is typically four hours. However, it is always a good idea to allow more time, especially if working in lower temperatures or areas with higher humidity, as these conditions can extend drying times. The presenter often waits until the next day to apply the polyurethane, ensuring the stain is fully cured and ready for the protective finishing coat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DVOtEbrs4eg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11083-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nNdFG4XrDzs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Stain to Dry and Enjoy — Wood Staining</video:title>
      <video:description>Once the stain has been applied, allow it to dry completely. The video recommends allowing 48 hours for the stain to dry, but always refer to the specific product label for accurate drying and return-to-service instructions, as these can vary based on product type, temperature, and humidity. Once dry, your beautiful deck will be protected from the elements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nNdFG4XrDzs</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11083-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MayYKLG-qFY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Stain to Dry and Cure — Wood Staining</video:title>
      <video:description>Allow the freshly stained wood to dry for a recommended 2 to 6 hours, with the exact time depending on temperature and humidity. To ensure the stain has fully set up and cured, wait a full 24 hours before placing any patio furniture back onto the deck or allowing heavy traffic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MayYKLG-qFY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11084-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ogKRX_MNBxo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply a Top Coat (Optional but Recommended) — Wood Staining</video:title>
      <video:description>After your wood stain has dried for at least 12 hours, you can apply a top coat. This adds extra durability, protects the wood, and enhances its grain. There are various top coats available, such as water-based or oil-based polyurethane (like Minwax Fast-Drying Polyurethane Clear Satin), furniture wax, or shellac. For oil-based polyurethane, thoroughly stir the product (do not shake) before applying. Use a foam brush to apply the polyurethane in very light, long strokes, following the wood grain, to avoid visible brush strokes. Always work in a well-ventilated area, and consider wearing a respirator mask to help avoid inhaling fumes. Allow the first coat of polyurethane to dry completely. If the wood grain has risen and feels rough (test by running your hand over it), lightly hand sand the surface using a 220-grit sanding block. Wipe away any sanding dust with a tack cloth before applying the second coat. Once the final coat of top coat has been applied, let your newly finished piece sit for at least a day, preferably three days, without use. This allows the top coat to fully cure to a hard, durable finish. Avoid working in super humid, very hot, or very cold conditions, as these can negatively affect drying and adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ogKRX_MNBxo</video:player_loc>
      <video:duration>182</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11084-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8r7xmuSx6Pg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Oil-Based Topcoat — Wood Staining</video:title>
      <video:description>After the stain has completely dried (typically 24 hours), it&apos;s time to apply a protective topcoat. The presenter demonstrates with two common options: General Finishes Arm-R-Seal (an oil-based wipe-on polyurethane) and Minwax Polycrylic (a water-based clear topcoat). For the oil-based poly, apply a thin, even coat using a foam brush over the entire board (Piece C). Avoid going back over areas that have already been coated to prevent streaks. Allow 12 to 24 hours for the first coat to dry. Then, give it a light sanding with 320-grit sandpaper, clean off the dust, and apply a second coat. Repeat this process for a third coat for optimal coverage and protection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8r7xmuSx6Pg</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11084-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W77sf0r9AjE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Clear Top Coat — Wood Staining</video:title>
      <video:description>After the stain has completely dried (refer to manufacturer instructions, usually 6-24 hours), it&apos;s time to apply a clear top coat for protection and durability. Use a clean brush to apply a thin, even layer of clear top coat over the stained wood. Allow the first coat to dry completely. For the smoothest finish and best adhesion between coats, lightly sand the surface with fine-grit sandpaper (around 220-400 grit) between each application of the top coat. Remove any sanding dust with a tack cloth before applying subsequent coats. Repeat the top coat application and light sanding process for the recommended number of coats (typically 2-3 coats) to achieve maximum protection and a professional-looking finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W77sf0r9AjE</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11077-1</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/07tEoVUlAWQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry, Sand, and Clean First Coat — Apply Finish to Stair Treads</video:title>
      <video:description>Allow the first coat of polyurethane to dry for several hours. Drying times vary depending on the type of polyurethane (oil-based typically 4-6 hours, water-based 2-3 hours) and environmental conditions like temperature and humidity. The wood should feel dry to the touch and not sticky. After the first coat dries, the wood grain may have risen, making the surface feel slightly rough. Use a 220-grit sand block or sandpaper to lightly hand-sand the entire surface, following the wood grain. Then, use a tack cloth to thoroughly wipe away all saw dust. The surface should now feel smooth again.</video:description>
      <video:player_loc>https://www.youtube.com/embed/07tEoVUlAWQ</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11077-2</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-Oe6jG5VWVw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry First Coat — Apply Finish to Stair Treads</video:title>
      <video:description>After applying the first coat, allow ample time for it to dry completely. For fast-drying polyurethane, the instructions typically suggest 3 to 4 hours. However, it is recommended to give it more time, such as 5 or 6 hours, to ensure it is thoroughly cured and ready for the next step. Avoid touching the surface during this period to prevent smudges or transfer of dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-Oe6jG5VWVw</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11077-3</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hkodyr8YBJk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Drying and Optional Sanding — Apply Finish to Stair Treads</video:title>
      <video:description>After applying each coat of polyurethane, it&apos;s essential to allow proper drying time before proceeding. Refer to the manufacturer&apos;s instructions on the polyurethane can for the recommended drying time, which typically ranges from a few hours to a full day. Once a coat has dried, you can optionally lightly sand the surface with fine-grit sandpaper (e.g., 220-grit). This sanding step is not always necessary but can help ensure a smoother surface and promote better adhesion for subsequent coats. If you do sand, make sure to thoroughly clean off any sanding dust before applying the next coat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hkodyr8YBJk</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11073-1</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Enb5bQ_uYac/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Polyurethane Finish to Treads — Apply Finish to Stair Treads</video:title>
      <video:description>Using a good quality paint brush, apply the polyurethane to the stair treads. Work with the grain of the wood, using nice, even strokes. The goal is to achieve a smooth and consistent coat without drips or brush marks. For the final pass on each tread, make one long, continuous stroke with the grain to even out the finish. The presenter recommends applying three coats of polyurethane for maximum durability. Allow each coat to dry for a couple of hours (refer to product instructions for exact drying times), then lightly sand the surface with a fine-grit sandpaper (e.g., 220-grit) and wipe clean with a tack cloth before applying the next coat. This inter-coat sanding helps to smooth out any imperfections and ensures better adhesion for subsequent layers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Enb5bQ_uYac</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11073-2</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrLRY9adkN8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Applying First Coat of Polyurethane — Apply Finish to Stair Treads</video:title>
      <video:description>With the stairs clean and dry, apply a thin, even coat of Minwax Polyurethane to the wooden treads using a paintbrush. For practical access, apply the polyurethane to every other step, allowing the untreated steps to be used for movement. Ensure consistent coverage and avoid drips or puddles. Allow the first coat to dry completely according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrLRY9adkN8</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11073-3</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F8eLXPuMBiw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Polyurethane Sealer — Apply Finish to Stair Treads</video:title>
      <video:description>Once the stain has completely dried (refer to product instructions for recommended drying times, usually a few hours), it&apos;s time to apply the polyurethane sealer. Sealer is extremely important for high-traffic areas like stair treads as it provides durability and protection against wear and tear. Using a clean paintbrush, apply the polyurethane in the direction of the wood grain. Similar to staining, use cardboard to protect the adjacent white risers and walls, ensuring a clean application line. The biggest tip when working with sealer is to make sure to brush out any drip marks or excess product immediately to avoid visible streaks and uneven finish. Apply multiple thin coats, allowing adequate drying time between each coat, according to the manufacturer&apos;s instructions, for maximum durability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F8eLXPuMBiw</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11074-1</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p7Q8mc6P7YU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Finish to Cure — Apply Finish to Stair Treads</video:title>
      <video:description>After applying the final coat of protective finish, allow the floor to cure completely. While the surface may feel dry to the touch within hours, full cure time can range from 24 hours to several days or even weeks, depending on the product and environmental conditions (humidity, temperature). Avoid heavy foot traffic, furniture placement, or rug laying until the finish has fully hardened to prevent impressions or damage. Consult the finish manufacturer&apos;s instructions for specific cure times.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p7Q8mc6P7YU</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11074-2</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pfjsI8HPKbE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Curing and Room Reset — Apply Finish to Stair Treads</video:title>
      <video:description>Once the final coat of wood floor finish has been applied, it&apos;s crucial to allow the floor sufficient time to fully cure. While the floor may be dry to the touch within a few hours (as shown by the glossy, dry appearance at the end of the video), it typically takes several days, often 24 to 72 hours, for the finish to achieve its full hardness and chemical resistance. During this curing period, avoid placing heavy furniture, rugs, or walking on the floor with shoes. The final appearance should be a uniform, glossy, and protective surface, as demonstrated at the end of the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pfjsI8HPKbE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11074-3</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IBCkJzuf73w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Finish to Dry and Cure — Apply Finish to Stair Treads</video:title>
      <video:description>After applying the final coat, carefully exit the room, ensuring no contact with the freshly applied finish. Allow the finish to dry and cure according to the wood finish manufacturer&apos;s specific instructions. Drying times can vary significantly based on the product type (water-based vs. oil-based), humidity, temperature, and ventilation. Avoid walking on the floor, placing furniture, or introducing excessive moisture until the finish is fully cured. Proper curing is essential for the durability and longevity of the floor&apos;s protective layer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IBCkJzuf73w</video:player_loc>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11078-1</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrLRY9adkN8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Applying First Coat of Polyurethane — Apply Finish to Stair Treads</video:title>
      <video:description>With the stairs clean and dry, apply a thin, even coat of Minwax Polyurethane to the wooden treads using a paintbrush. For practical access, apply the polyurethane to every other step, allowing the untreated steps to be used for movement. Ensure consistent coverage and avoid drips or puddles. Allow the first coat to dry completely according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrLRY9adkN8</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11078-2</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wro_ABm9blg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply First Coat of Polyurethane — Apply Finish to Stair Treads</video:title>
      <video:description>After the stain has thoroughly dried, the treads are ready for the first coat of polyurethane. Ensure you are wearing a respirator for fume protection. The creator uses ZAR Interior Oil Base Fast Dry Polyurethane in a satin finish, applied with a 2.5-inch Corona Vegas brush. Apply a full and even coat of polyurethane to the entire surface of each tread, moving with the grain of the wood. Pay special attention to covering the bullnose (the rounded front edge of the tread) thoroughly, as this area experiences high traffic. Work from the top of the stairs downwards to avoid stepping on wet surfaces. Allow the first coat to dry for a couple of hours. Fast-drying polyurethanes typically dry to the touch in about two hours, but actual drying time can vary based on environmental conditions like humidity and temperature.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wro_ABm9blg</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11078-3</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xg3z_zR49VM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply First Coat of Oil-Based Polyurethane — Apply Finish to Stair Treads</video:title>
      <video:description>Prepare the oil-based polyurethane by thoroughly stirring it. It is crucial *not to shake* the can, as shaking can introduce air bubbles that will create an uneven finish. Stir slowly and thoroughly to mix the satin pigment with the clear honey gloss, creating a creamy, consistent mixture. Once stirred, apply the first coat of polyurethane using a 10-inch wide synthetic roller on an extension pole. Apply the polyurethane in sections approximately two planks wide, then go back over the previous section halfway to ensure smooth blending and catch any potential drips. Maintain a consistent technique to avoid harsh lines, as the polyurethane is self-leveling. It&apos;s helpful to remove baseboards before this step for easier application near walls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xg3z_zR49VM</video:player_loc>
      <video:duration>151</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11076-1</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t3gdJqiFHnM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Third Coat — Apply Finish to Stair Treads</video:title>
      <video:description>For the ultimate protection against fading, moisture, and scratches, apply a third and final coat of polyurethane. After applying the third coat with a bristle brush, carefully inspect the entire surface for any remaining air bubbles or drips and address them immediately. Once satisfied with the application, allow the final coat to dry completely. This step ensures maximum durability and a professional-looking finish for your wood project.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t3gdJqiFHnM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11076-2</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gUw_js-WhxY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Subsequent Coats and Finish — Apply Finish to Stair Treads</video:title>
      <video:description>Apply additional coats of polyurethane using the same technique as the first coat: thin, even layers applied with a foam brush, brushing with the wood grain. The presenter suggests looking at the surface from an angle to easily spot any dry spots or areas you might have missed. For this particular project, he applied a total of six coats to achieve a thick, durable finish. Remember to allow each coat to dry for at least two hours, and repeat the light sanding (Step 2) and tack cloth cleaning (Step 3) processes between each subsequent coat to maintain smoothness and ensure optimal adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gUw_js-WhxY</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11076-3</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4ajf3GZfMIk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Apply Additional Polyurethane Coats — Apply Finish to Stair Treads</video:title>
      <video:description>After the first coat has dried for 3 to 4 hours, lightly sand the surface again using 220-grit sandpaper. This step ensures an even finish and helps subsequent coats adhere properly. Remove all sanding dust using a lint-free clean cloth. Once clean and dry, apply a second thin coat of polyurethane following the same application method as the first. If a third coat is desired for enhanced durability, repeat the sanding and dust removal steps before applying the final coat. After the final coat, allow 24 hours for complete drying before light handling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4ajf3GZfMIk</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11075-1</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/whvOypwvybo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand Between Coats — Apply Finish to Stair Treads</video:title>
      <video:description>After the first coat has dried (typically 2-4 hours, but can be up to 24-48 hours), use a fine 120-grit sandpaper or sanding block to lightly sand the entire surface. This step helps to smooth out any remaining imperfections from the first coat, such as dried bubbles or minor build-up. Once sanded, wipe off all the resulting sawdust and dust thoroughly using a paper towel to prepare for the next coat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/whvOypwvybo</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11075-2</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yvl1Foj5564/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for the Third Coat — Apply Finish to Stair Treads</video:title>
      <video:description>Before applying the third coat, the surface needs light preparation. Use 320-grit sandpaper and lightly sand the entire surface. The goal is to knock down any dust nibs or minor imperfections that may have settled in the previous coats. Avoid heavy pressure. After sanding, the surface might have a white, powdery residue. Clean this residue using a slightly damp paper towel, wiping gently across the surface. Alternatively, a tack cloth is the best option for completely removing all dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yvl1Foj5564</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11075-3</loc>
    <lastmod>2026-09-24T04:00:08.342Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/v4NCxzNdNAw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Final Thin Coat and Buff — Apply Finish to Stair Treads</video:title>
      <video:description>Once the third coat has dried, lightly sand the surface again, this time with a finer 600-grit sandpaper to achieve a very smooth feel. After sanding, apply the final coat of finish, making it as thin as possible while still ensuring the entire surface is evenly wet. This super-thin coat dries quickly, which is beneficial for minimizing dust particles settling on the surface in a dusty environment. As an optional step for an even smoother result, perform a final buffing with a brown paper bag, which is roughly equivalent to 1500-grit sandpaper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/v4NCxzNdNAw</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-09-24T04:00:08.342Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11072-1</loc>
    <lastmod>2026-09-24T01:03:07.621Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — replace stair treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-24T01:03:07.621Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11072-2</loc>
    <lastmod>2026-09-24T01:03:07.621Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — replace stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-24T01:03:07.621Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11072-3</loc>
    <lastmod>2026-09-24T01:03:07.621Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — replace stair treads</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-24T01:03:07.621Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11071-1</loc>
    <lastmod>2026-09-24T01:03:07.621Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — replace stair treads</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-24T01:03:07.621Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11071-2</loc>
    <lastmod>2026-09-24T01:03:07.621Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — replace stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-24T01:03:07.621Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11071-3</loc>
    <lastmod>2026-09-24T01:03:07.621Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — replace stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-24T01:03:07.621Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11061-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xaCMaZ15e0w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Pathways of All Vegetation — Ground Cover Planting</video:title>
      <video:description>Before installing any weed barrier, it is crucial to meticulously clear all existing vegetation from the designated garden pathways. This step is best performed at the outset of setting up your garden space. Employ tools like a shovel, a weed eater, or a sod cutter to physically remove grass and ground cover. For areas with persistent weeds that spread through runners, consider more intensive methods such as spraying with a concentrated vinegar solution or using a torch to kill the plants completely from the root up. The goal is to ensure no plant material remains that could potentially regrow beneath the barrier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xaCMaZ15e0w</video:player_loc>
      <video:duration>100</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11061-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dFMeTWIyxpE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear the Surface — Ground Cover Planting</video:title>
      <video:description>Begin by thoroughly clearing the designated area of any existing vegetation, such as grass and roots, as well as any mulch or other debris. Use a shovel or hoe to dig up and scrape away all unwanted materials from the surface of the ground. Collect the removed materials into a wheelbarrow for easy transport and disposal, ensuring the area is clean and level before proceeding to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dFMeTWIyxpE</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11061-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p8SNTmNL1AQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prep the area — Ground Cover Planting</video:title>
      <video:description>Prepare the designated area by raking away any debris, existing weeds, or large rocks. After raking, use a hand grading technique to smooth and level the soil, ensuring a clean and even surface for the landscape fabric.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p8SNTmNL1AQ</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11062-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0KvUnK1MAUQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Till and Amend Soil with Compost — Ground Cover Planting</video:title>
      <video:description>After the initial weed removal and optional solarization, the next crucial step is to amend the soil to improve its structure and nutrient content. Begin by tilling the area to loosen the soil, creating a soft and welcoming bed for new roots. Following tilling, generously add good quality compost to the entire area. Thoroughly mix the compost into the tilled soil. Compost is an excellent organic amendment that enhances soil fertility, improves drainage in heavy soils, increases water retention in sandy soils, and provides essential nutrients for robust plant growth. This rich, well-conditioned soil will promote healthy, deep root development, whether you&apos;re planting sod or seed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0KvUnK1MAUQ</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11062-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xP5SYypfisQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Amend the Soil — Ground Cover Planting</video:title>
      <video:description>If you have access to organic matter, such as well-rotted horse manure or garden compost, it&apos;s beneficial to add it to the trench. Spread the organic matter along the bottom of the trench and use a fork to thoroughly mix it into the existing soil. This improves soil structure, drainage, and nutrient content, providing a better environment for root growth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xP5SYypfisQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11062-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ZG7Z8wZHPc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Amend and Prepare the Soil — Ground Cover Planting</video:title>
      <video:description>After cleaning and preparing the bed, use a garden rake to gently level the soil. If your soil quality is poor or you want to give your plants an extra boost, add a layer of garden soil or compost. Spread the soil amendment evenly over the desired planting area. Wet the newly added soil thoroughly to help it settle and to provide moisture for the new plants.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ZG7Z8wZHPc</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11063-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/84txoIFS9BQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level and Rake Soil — Ground Cover Planting</video:title>
      <video:description>After blending the soil amendments, the area might look a bit messy. Use a soil spreader or the back of a landscape rake to level the ground. It&apos;s good practice to mound the soil up slightly, as it tends to bulk up after being turned. As you level, gently rake out any detritus (debris) that has been brought to the surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/84txoIFS9BQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11063-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RkGiGZV8RMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rake to a Fine Tilth — Ground Cover Planting</video:title>
      <video:description>Once the bed is clear, use a bow rake to break down any remaining soil clumps and create a smooth, level surface. This fine texture, known as a &apos;fine tilth,&apos; is crucial for good seed-to-soil contact and optimal germination.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RkGiGZV8RMY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11063-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ubp0Gll2rnE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level and Refine Soil Surface — Ground Cover Planting</video:title>
      <video:description>After weeding, use a hard rake to level the entire garden bed. This process not only smooths the surface but also lightly tills the top half-inch of soil, creating a fine, workable texture that is ideal for sowing seeds. Ensure the surface is even and free of large clumps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ubp0Gll2rnE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11064-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bFirKQ25NUE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choosing Appropriate Ground Cover Plants — Ground Cover Planting</video:title>
      <video:description>When selecting ground cover plants, it&apos;s crucial to consider various factors to ensure they thrive and fulfill their purpose. Key considerations include the plant&apos;s light requirements (shade versus sun needs), soil conditions (dry versus wet), and overall suitability for the specific garden environment. Making informed choices will help achieve a fresh, new look for the garden.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bFirKQ25NUE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11064-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qDBQrYMitSU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Selecting Ground Covers for Full Sun — Ground Cover Planting</video:title>
      <video:description>Examine various ground cover plants that thrive in full sun. &apos;Super Star Creeper&apos; (Pratia alba) is a white-flowering ground cover that grows very tightly and requires average watering. &apos;Blue Star Creeper&apos; (Isotoma) is similar but has blue flowers and grows slightly taller. &apos;Elfin Thyme&apos; (Thymus praecox &apos;Elfin&apos;) releases a pleasant aroma when walked upon and prefers drier conditions. &apos;Scotch Moss&apos; (Sagina subulata &apos;Aurea&apos;) and &apos;Irish Moss&apos; (Sagina subulata) are moss-like plants that also prefer full sun and drier conditions, contrary to typical mosses that like shade and dampness. All these varieties can tolerate moderate foot traffic, which helps them grow tighter to the ground.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qDBQrYMitSU</video:player_loc>
      <video:duration>149</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11064-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qDBQrYMitSU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Selecting Ground Covers for Shade — Ground Cover Planting</video:title>
      <video:description>Explore ground cover varieties that are better suited for shady conditions. &apos;Miniature Sweet Flag&apos; (Acorus gramineus &apos;Minimus Aureus&apos;) is a grass-like plant that prefers shade and thrives in very wet, even mucky, soil where other plants might fail. &apos;Baby&apos;s Tears&apos; (Soleirolia soleirolii) forms a dense mat of tiny leaves and is suitable for shady areas. &apos;Black Brass Buttons&apos; (Leptinella squalida &apos;Platt&apos;s Black&apos;) and &apos;Miniature Brass Buttons&apos; (Leptinella gruvelii &apos;Miniature&apos;) are also good options for partial shade, ideally morning sun with afternoon shade, providing a fern-like texture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qDBQrYMitSU</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11065-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hHX2-qBmCCo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Out Plants — Ground Cover Planting</video:title>
      <video:description>The gardeners begin by arranging all the potted plants onto the garden bed. This crucial step allows them to visualize the final layout, ensuring proper spacing and aesthetic balance before any digging begins. They adjust the positions of the white petunias, yellow Gaillardia, lavender, clematis, boxwood, goldmound spirea, and white yarrow until a pleasing arrangement is achieved along the curved bed and near the picket fence.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hHX2-qBmCCo</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11065-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YOfsUwzgv_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Layout Plants for Design and Spacing — Ground Cover Planting</video:title>
      <video:description>Prior to planting, lay out all your plants on the prepared soil in their pots or trays. This allows you to visualize the arrangement and make adjustments. It&apos;s important to consider how large each plant will grow in future years and ensure they have ample space to expand without overcrowding. To create a more natural and fuller appearance, position plants in groups of three of the same kind. If you have many of one variety, repeating these groups can add a sense of balance and symmetry to your border design, making it more visually appealing than haphazard placement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YOfsUwzgv_g</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11065-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fwzqZDD-U5Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-Planting Layout — Ground Cover Planting</video:title>
      <video:description>Before digging the final planting holes, the landscaper carefully places all the potted plants (azaleas, arborvitae, and liriope grass) in their intended positions within the newly shaped bed. This crucial step allows for visual adjustment of spacing and arrangement, ensuring the plants will grow without overcrowding and contribute to a balanced aesthetic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fwzqZDD-U5Q</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11066-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VYD_nd9IEgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plant New Plants — Ground Cover Planting</video:title>
      <video:description>Once the plant arrangement is finalized, begin planting. Dig holes for each plant, ensuring they are wide and deep enough to accommodate the root ball. Carefully remove each plant from its nursery pot, loosen any circling roots, and place the plant in the hole so that the top of the root ball is level with the surrounding soil. Backfill the hole with soil, gently firming it around the base of the plant. Consider adding soil amendments like compost or fertilizer if needed to enrich the soil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VYD_nd9IEgQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11066-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fwzqZDD-U5Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Digging Planting Holes — Ground Cover Planting</video:title>
      <video:description>Once the plant layout is finalized, holes are dug for each plant. The landscaper first uses a pickaxe (mattock) to loosen the soil in the designated spots, making it easier to dig. Then, he uses a shovel to excavate the holes. He advises that each hole should be dug to a size that is 2.5 to 3 times the width of the plant&apos;s rootball. This provides ample space for roots to spread and establish quickly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fwzqZDD-U5Q</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11066-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nVW2EB-UlMk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plant and Position — Ground Cover Planting</video:title>
      <video:description>Gently remove each plant from its pot. Inspect the root ball; if the roots are circling tightly or are very dense, gently tease them apart with your fingers or a small hand tool. This action encourages the roots to spread into the new soil rather than continuing to grow in their potted shape. Next, place the plant into the prepared hole. Before backfilling with soil, step back and examine the plant from all angles to ensure it is straight and at the correct height. It&apos;s much easier to make adjustments now than after the soil is packed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nVW2EB-UlMk</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11067-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BMNkQB_2wOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Spread Seed and Cover With Soil — Ground Cover Planting</video:title>
      <video:description>Evenly spread the grass seeds over the prepared soil in the desired area. Aim for consistent coverage across every inch. After spreading, lightly cover the grass seeds with a layer of loose soil or dirt, approximately 0.5 inches thick. This layer protects the seeds from birds and helps retain moisture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BMNkQB_2wOE</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11067-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/76ymLL69mfA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Spread Grass Seed — Ground Cover Planting</video:title>
      <video:description>Take the grass seed and, using your hands (or a broadcast spreader for larger areas), evenly scatter it across the entire prepared soil surface. Ensure good coverage without clumping the seeds in one spot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/76ymLL69mfA</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11067-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KPNgaHfvIW8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sow the Grass Seed — Ground Cover Planting</video:title>
      <video:description>Next, sow your grass seed. For small areas, you can broadcast the seed by hand, ensuring even distribution. For larger areas, use a broadcast spreader or a smaller hand spreader for more uniform coverage. Aim to distribute the seeds so they are about 1/4 to 1/2 inch apart, avoiding both overly thick and overly sparse application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KPNgaHfvIW8</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11068-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hHX2-qBmCCo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water Newly Planted Bed — Ground Cover Planting</video:title>
      <video:description>After all plants are in the ground, thoroughly water the entire garden bed. This helps settle the soil around the roots and provides essential moisture for the plants to establish themselves in their new environment. A garden hose with a gentle shower setting is ideal for this task.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hHX2-qBmCCo</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11068-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SCdWi8eAR5U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Plants — Ground Cover Planting</video:title>
      <video:description>After all the flowers have been planted and the mulch is in place, it is essential to give the entire flower bed a thorough watering. This initial watering serves several critical purposes: it helps settle the soil around the newly planted roots, eliminates any air pockets that could dry out the roots, and provides much-needed moisture to help the plants establish themselves in their new environment. Use a gentle stream of water to avoid displacing soil or damaging delicate young plants.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SCdWi8eAR5U</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11068-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lsLbE78A0pA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water Newly Planted Areas — Ground Cover Planting</video:title>
      <video:description>After planting all the new plants, give them a good watering. Use a watering can or hose with a gentle spray to thoroughly moisten the soil around the root balls of each plant. Even if rain is expected, this initial deep watering is crucial to help settle the soil and eliminate air pockets around the roots, ensuring the plants establish well.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lsLbE78A0pA</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11069-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tim4LEo6l10/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Mulch — Ground Cover Planting</video:title>
      <video:description>Once the plant is backfilled, add a layer of natural mulch around its base. The video suggests using &apos;ground pine bark mulch&apos; and applying a 1- to 2-inch layer. Extend the mulch out to the plant&apos;s dripline or even beyond for optimal coverage. A crucial detail is to keep the mulch away from the base of the plant by about 1-2 inches. This small gap prevents direct contact between the mulch and the plant&apos;s stem or trunk, which can create a pathway for pests or diseases to potentially infect the plant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tim4LEo6l10</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11069-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/giXfCHT05wk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Put Mulch Around It — Ground Cover Planting</video:title>
      <video:description>Finally, apply a light layer of mulch around the base of the seedling. The video suggests using wood chips. Mulch serves several beneficial purposes: it helps retain soil moisture, reduces weed growth that competes for nutrients, and insulates the soil from temperature extremes. Ensure the mulch layer is not too thick and is kept a few inches away from the seedling&apos;s stem to prevent moisture buildup against the bark, which can lead to rot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/giXfCHT05wk</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11069-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VYD_nd9IEgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Mulch — Ground Cover Planting</video:title>
      <video:description>Once all the plants are in the ground, spread a layer of mulch over the entire garden bed. Mulch helps retain soil moisture, suppress weeds, and regulate soil temperature. Spread an even layer, ensuring it doesn&apos;t pile up against the plant stems, which can lead to rot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VYD_nd9IEgQ</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11070-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zPnhP1o0GD0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Post-Planting Watering and Ongoing Maintenance — Ground Cover Planting</video:title>
      <video:description>After planting, the new native garden requires consistent care to ensure plant establishment. During the rainy season, hand-water frequently as needed. For the first summer, water every 6 to 8 weeks, adjusting based on plant needs and local climate. The goal is to establish the plants so they become self-sufficient and require minimal watering later. This ongoing care ensures the garden thrives and evolves over time, creating a beautiful and sustainable ecosystem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zPnhP1o0GD0</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11070-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qDBQrYMitSU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Weed Management for Ground Covers — Ground Cover Planting</video:title>
      <video:description>Effective weed management is crucial, especially in the early stages when ground cover plants are establishing. It&apos;s a common misconception that ground covers will prevent all weeds; early and consistent hand-pulling of weeds is the most effective method. Once the ground covers mature and fill in densely, weed growth will be significantly reduced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qDBQrYMitSU</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11070-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hXc63ZWWqOQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water and Maintain — Ground Cover Planting</video:title>
      <video:description>The most crucial aspect of this project is consistent watering for 2-3 weeks. The soil must be kept damp at all times, but not flooded. If the weather is windy and hot, you may need to water twice a day. Use a garden hose with a spray nozzle to mist the area gently for a few minutes, avoiding heavy streams that could wash away the seeds. The ideal time for planting and watering is when the temperature consistently stays between 45°F and 75°F, which is typically mid-spring or mid-fall in most regions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hXc63ZWWqOQ</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11052-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QPfjvVC-PiE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose the Site — Ornamental Grass Planting</video:title>
      <video:description>Begin by selecting the ideal location for your wildflowers. For the best results and 90% success, choose a spot that receives full sun, meaning at least six hours of direct sunlight per day. These are typically open and sunny areas. If a full sun spot is not available, you can consider a partial shade mixture, which requires a minimum of three hours of sun. Such locations might be along a wood line or near a building that provides shade for part of the day. Prioritizing full sun will yield the most vibrant and abundant blooms.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QPfjvVC-PiE</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11052-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/O-9eG_KbP4c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select an Optimal Planting Location — Ornamental Grass Planting</video:title>
      <video:description>Pomegranates are sun-loving plants, requiring at least 6 hours of direct sunlight daily, with 8 hours being ideal. They tolerate full sun well, even intense afternoon sun in hot desert climates. Ensure the planting location has good drainage, as pomegranates are not particular about soil type (even tolerating alkaline soil) but their roots should not sit in water. In cooler climates, consider a western exposure or planting near a block wall to provide additional warmth and protection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/O-9eG_KbP4c</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11052-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lLqEJyZFv_A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Optimal Garden Site for Sun — Ornamental Grass Planting</video:title>
      <video:description>Begin by selecting the most suitable location for your raised garden beds, as sun exposure is the single most critical factor for successful vegetable cultivation. Most vegetables require &apos;full sun,&apos; meaning at least 6-8 hours of direct sunlight per day. Avoid areas with deep or even moderate shade, as this will significantly hinder plant growth and reduce yields. To accurately assess the amount of sunlight a potential site receives, utilize a dedicated sun calculator tool, such as the &apos;Suncalc&apos; meter by Rapidtest. Place this device in the ground and leave it for a full sunny day (avoiding cloudy days for accurate readings). After 24 hours, the meter will indicate the sun exposure level (full sun, partial sun, partial shade, or full shade). This information will help you align the site&apos;s light conditions with the specific sun requirements of your chosen vegetables, typically listed on seed packets or plant labels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lLqEJyZFv_A</video:player_loc>
      <video:duration>136</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11053-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YOfsUwzgv_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Soil in the Border — Ornamental Grass Planting</video:title>
      <video:description>Before planting, prepare the soil in the designated border area. This involves digging over the soil to loosen it, which improves aeration and drainage. Once dug, mix in a generous amount of well-rotted manure. This organic matter will significantly enhance the soil&apos;s structure and fertility, providing essential nutrients that will give the plants a good start and feed them as they grow, contributing to their overall health and vigor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YOfsUwzgv_g</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11053-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9geTqHwopOw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Soil Bed — Ornamental Grass Planting</video:title>
      <video:description>Begin by thoroughly forking over the entire area of soil using a garden fork to loosen compacted earth and improve aeration. Next, use a landscape rake to break down any large clods of soil and carefully remove any large stones or debris that could hinder grass growth. Continue raking until the soil is fine and relatively level. Once the surface appears even, firm the ground by walking over it in short, shuffling steps. This removes air pockets and creates a solid foundation. Finally, use the landscape rake again to gently re-rake the entire area, breaking up any footprints and leaving a perfectly fine, smooth seedbed. For an even finer finish and to remove any remaining small stones or weeds, use a metal rake.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9geTqHwopOw</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11053-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-k6j8lqQgTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Soil — Ornamental Grass Planting</video:title>
      <video:description>Begin by digging a square hole, approximately 45 centimeters (18 inches) by 45 centimeters (18 inches), and about the depth of your spade. After removing the initial soil, use a spade to break up the soil at the bottom of the hole for a bit more depth, without actually removing it. Then, switch to a garden fork to thoroughly mix and aerate the loosened soil, which helps roots grow more easily. Add a generous amount of compost, roughly a third of a wheelbarrow or half a dozen shovelfuls, to the loosened soil, mixing it well. The compost can be normal garden compost, well-rotted manure, or a bagged product from a garden center, as long as it&apos;s organic. It keeps the soil open and airy. Finally, sprinkle mycorrhizal fungi (such as Rootgrow) into the hole and mix it with the soil. This fungi greatly enhances the root system&apos;s ability to absorb nutrients from the soil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-k6j8lqQgTk</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11054-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tim4LEo6l10/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dig the Planting Hole — Ornamental Grass Planting</video:title>
      <video:description>Begin by digging a planting hole that is at least two times, and preferably three times, wider than the plant&apos;s root ball. The depth of the hole is crucial: it should have a firm foundation but should not be deeper than the soil level the plant was growing in its container. Ideally, the plant should sit slightly higher than the surrounding grade. To gauge the correct depth, place a tool, such as a shovel, across the hole and compare its level to the base of the plant&apos;s root ball. You are aiming for the plant&apos;s base to be level with or slightly (about 25%) higher than the surrounding soil. This ensures water runs off rather than pooling around the plant, which can lead to drowning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tim4LEo6l10</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11054-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TP6NfDAliNo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dig Planting Holes — Ornamental Grass Planting</video:title>
      <video:description>Begin by digging a hole for each plant. The hole should be the same depth as the plant&apos;s root ball but approximately twice its diameter. This wider hole provides ample space for roots to spread out. In this project, the soil had been pre-amended with compost when the lawn was removed; however, if your soil hasn&apos;t been pre-amended, you would typically dig the hole wider and amend the backfill soil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TP6NfDAliNo</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11054-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nVW2EB-UlMk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dig Planting Holes — Ornamental Grass Planting</video:title>
      <video:description>Once the plant arrangement is finalized, use the shovel to trace a circle around each plant&apos;s pot directly on the soil. Then, remove the plants and dig a hole for each, making it two to three times wider than the pot. This wider hole helps loosen the surrounding native soil, encouraging the plant&apos;s roots to grow outward and downward more easily, preventing root binding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nVW2EB-UlMk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11055-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ARwB7xb--sQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Plant from Container — Ornamental Grass Planting</video:title>
      <video:description>To safely remove the plant from its container, gently give the bottom of the pot a little &apos;rap&apos; or tap. This action helps to loosen the root ball from the container, allowing it to slide out easily without damaging the plant or its root structure. The example shown is a Rudbeckia triloba.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ARwB7xb--sQ</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11055-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Fy8kP2EYpcY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Plant from Current Container — Ornamental Grass Planting</video:title>
      <video:description>To remove the plant from its old container, you can water it a few days or hours beforehand, or remove it while the soil is dry—either method works based on preference. Begin by gently massaging the sides of the container to help loosen the soil. If the plant is still stuck, use a thin tool to carefully scrape along the inside edges of the pot. Then, grab the base of the plant while holding the container down, and gently pull the plant out. Turning the plant and pot on its side can often make this step easier. The primary goal is to keep most of the roots intact, though it&apos;s perfectly normal if a few roots are severed during the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Fy8kP2EYpcY</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11055-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nUu0BElS0-E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Planting a Tender Herb (Parsley) — Ornamental Grass Planting</video:title>
      <video:description>Fill your chosen container (e.g., a red terracotta pot) about three-quarters of the way with potting mix. Create a shallow indent in the center. To ease the removal of the plant from its nursery pot, ensure the soil is moist. Invert the nursery pot and gently squeeze it until the plant slides out. Carefully loosen the roots at the bottom of the plant. Position the plant in the prepared hole, making sure its original soil level is maintained. Inspect the plant for any damaged or dead leaves and pinch them off. Finally, backfill the pot with additional potting mix and gently press around the base of the plant to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nUu0BElS0-E</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11056-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ARwB7xb--sQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Plant in Hole — Ornamental Grass Planting</video:title>
      <video:description>Prepare a hole that is not too deep. Place the prepared plant into the hole. The top of the root ball should be even with the surrounding native soil, or slightly higher. Planting it a little high is generally better than too low, as it prevents the &apos;bathtub&apos; effect and ensures proper drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ARwB7xb--sQ</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11056-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cyMjC6rujtI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plant Grasses and Install Drip Irrigation — Ornamental Grass Planting</video:title>
      <video:description>Carefully place each prepared grass plant into its amended hole. Backfill around the root ball with a mixture of the excavated soil and additional compost, ensuring the plant is upright and stable. Once planted, install a drip irrigation system around the base of each grass. The presenter uses 1/4-inch brown drip line, forming a ring around each plant, secured with a connector. Each ring is equipped with 8 emitter holes, designed to deliver 0.5 gallons of water per hour, ensuring even and consistent moisture directly to the root zone.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cyMjC6rujtI</video:player_loc>
      <video:duration>105</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11056-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SHBri0t0k2I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Planting Ornamental Grasses — Ornamental Grass Planting</video:title>
      <video:description>After positioning, prepare to plant the grasses. First, use your hands to clear the mulch away from the planting area. Next, carefully remove the grass from its nursery pot. Inspect the root system; if it&apos;s root-bound at the bottom, gently tease the roots apart to encourage outward growth. Dig a hole using a shovel, making it roughly the same depth and twice the width of the plant&apos;s root ball. Place any excavated soil into the empty nursery pot to keep the area clean. Add &apos;Espoma Organic Bio-tone Starter Plant Food&apos; into the dug hole, then mix it thoroughly with the native soil at the bottom of the hole. Finally, place the grass into the prepared hole, backfill with the amended soil, and gently firm the soil around the base of the plant. Smooth the displaced mulch back into place around the newly planted grass.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SHBri0t0k2I</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11057-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nVW2EB-UlMk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill and Check Depth — Ornamental Grass Planting</video:title>
      <video:description>Once the plant is perfectly positioned, begin to backfill the hole with the mixed native soil and amendments. As you backfill, gently pat the soil around the root ball with your foot to provide stability and eliminate large air pockets. Be careful not to step too hard or compact the soil excessively, as this can hinder root growth and ultimately stunt the plant&apos;s development. Also, ensure the soil line around the plant is not higher than it was in the original pot to prevent stem rot and allow for proper oxygen exchange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nVW2EB-UlMk</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11057-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tim4LEo6l10/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill with Native Soil — Ornamental Grass Planting</video:title>
      <video:description>After preparing the root ball and placing the plant in the hole at the correct depth, it&apos;s time to backfill. Use the native soil that was originally removed from the hole to fill around the root ball. Gently firm the soil as you go, but do not compact it excessively, as this can restrict root growth. Ensure the soil level tapers slightly away from the plant&apos;s base towards the existing grade. This design helps prevent water from pooling around the plant and encourages proper drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tim4LEo6l10</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11057-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FR0kTBpVob8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill and Top Dress — Ornamental Grass Planting</video:title>
      <video:description>Backfill the hole around the tree&apos;s root ball with the original soil removed earlier, along with the remaining half bag of compost. Gently tamp down the soil with your hands or feet to remove large air pockets without compacting the soil too much. After backfilling, sprinkle the remaining organic granular fertilizer around the base of the tree and lightly mix it into the topsoil. Form a slight berm around the edge of the planting hole to help retain water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FR0kTBpVob8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11058-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QGAEO-RLD0Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water Immediately and Regularly — Ornamental Grass Planting</video:title>
      <video:description>After the perennial has been planted and the soil firmed, immediately water it thoroughly. This helps settle the soil around the roots and provides initial hydration. Continue to water the plant regularly for the next few days to assist in its establishment. Following this initial period, natural rainfall should largely suffice, and the plant will continue to grow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QGAEO-RLD0Q</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11058-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ksghZPj-zg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Watering and Sustenance — Ornamental Grass Planting</video:title>
      <video:description>After planting, it is crucial to mist the newly sown area. Avoid heavy watering, as this can wash away the small seeds and displaced soil, preventing proper germination. The goal is to keep the soil consistently moist without creating runoff. Once the soil is thoroughly moist from consistent misting, you can begin to water a little deeper and stronger to help the roots establish and sustain the growing grass.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ksghZPj-zg</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11058-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2xzq5Jp2uxo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Newly Sown Lawn — Ornamental Grass Planting</video:title>
      <video:description>Immediately after sowing and firming, water the area thoroughly to initiate the seed germination process. When watering, use a fine spray watering can or a sprinkler attached to a garden hose. It is crucial to apply water gently to avoid washing the grass seeds away from their settled positions or creating puddles, which can displace seeds and compact the soil. Continue to water daily until the new grass is well established, a period that typically lasts between one to two weeks. If you are experiencing very hot weather conditions, adjust your watering schedule to late in the day, after the sun has set, to minimize evaporation. Remember, it is more effective to water thoroughly in one session rather than applying light amounts of water several times, as deep watering encourages deeper root growth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2xzq5Jp2uxo</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11059-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tim4LEo6l10/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Mulch — Ornamental Grass Planting</video:title>
      <video:description>Once the plant is backfilled, add a layer of natural mulch around its base. The video suggests using &apos;ground pine bark mulch&apos; and applying a 1- to 2-inch layer. Extend the mulch out to the plant&apos;s dripline or even beyond for optimal coverage. A crucial detail is to keep the mulch away from the base of the plant by about 1-2 inches. This small gap prevents direct contact between the mulch and the plant&apos;s stem or trunk, which can create a pathway for pests or diseases to potentially infect the plant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tim4LEo6l10</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11059-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XT0-UkEmrRg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Long-Term Care for Ornamental Grasses — Ornamental Grass Planting</video:title>
      <video:description>Once established, ornamental grasses are relatively low-maintenance. They are incredibly drought-tolerant, especially when mulched. You&apos;ll primarily need to water them during the hottest summer days. In cooler regions, during winter, the foliage of some grasses may completely die back, turning bronze. The presenter suggests leaving this bronzed foliage through winter as it provides sculptural elements to the garden. In early spring, cut the grasses down to the ground to allow space for fresh new growth. When pruning in subsequent years, make sure to cut slightly higher than the previous year to avoid damaging the plant. These simple care tips will help your ornamental grasses thrive.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XT0-UkEmrRg</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11059-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FcmR8KbJzH8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mulching with Grass Clippings (General Use) — Ornamental Grass Planting</video:title>
      <video:description>Utilize grass clippings as a mulch to suppress weeds and retain soil moisture. Apply a layer of dried grass clippings approximately 1 inch (2-3 cm) thick around your plants. This layer acts as insulation, slowing down evaporation and maintaining consistent soil temperature.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FcmR8KbJzH8</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11060-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eaYDdjxRjMU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Watering and Establishment — Ornamental Grass Planting</video:title>
      <video:description>During their first year in the ground, ensure ornamental grasses receive 1 inch of water once per week through slow, deep watering. This helps establish strong root systems. After the initial growing season, grasses typically establish quickly and require less intervention.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eaYDdjxRjMU</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11060-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2xzq5Jp2uxo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Newly Sown Lawn — Ornamental Grass Planting</video:title>
      <video:description>Immediately after sowing and firming, water the area thoroughly to initiate the seed germination process. When watering, use a fine spray watering can or a sprinkler attached to a garden hose. It is crucial to apply water gently to avoid washing the grass seeds away from their settled positions or creating puddles, which can displace seeds and compact the soil. Continue to water daily until the new grass is well established, a period that typically lasts between one to two weeks. If you are experiencing very hot weather conditions, adjust your watering schedule to late in the day, after the sun has set, to minimize evaporation. Remember, it is more effective to water thoroughly in one session rather than applying light amounts of water several times, as deep watering encourages deeper root growth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2xzq5Jp2uxo</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11060-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KPNgaHfvIW8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Maintain Watering for Establishment — Ornamental Grass Planting</video:title>
      <video:description>To ensure the successful establishment of your new grass, you will need to make sure that the area stays consistently watered throughout the first year of its growth. Consistent moisture is vital for the grass to develop a strong root system and become fully established.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KPNgaHfvIW8</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11051-1</loc>
    <lastmod>2026-11-18T11:45:36.337Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Carpet Stair Treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-18T11:45:36.337Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11051-2</loc>
    <lastmod>2026-11-18T11:45:36.337Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-18T11:45:36.337Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11051-3</loc>
    <lastmod>2026-11-18T11:45:36.337Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — Carpet Stair Treads</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-18T11:45:36.337Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11050-1</loc>
    <lastmod>2026-11-18T11:45:36.337Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — Carpet Stair Treads</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-18T11:45:36.337Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11050-2</loc>
    <lastmod>2026-11-18T11:45:36.337Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-18T11:45:36.337Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11050-3</loc>
    <lastmod>2026-11-18T11:45:36.337Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Carpet Stair Treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-18T11:45:36.337Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11046-1</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Measure Staircase Treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11046-2</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Measure Staircase Treads</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11046-3</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Rise — Measure Staircase Treads</video:title>
      <video:description>The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11048-1</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Measure Staircase Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11048-2</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Measure Staircase Treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11048-3</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Cut Your Treads — Measure Staircase Treads</video:title>
      <video:description>With the nosing removed, prepare the replacement treads for installation. Begin by measuring each tread individually using a tape measure, as stairway widths can vary from one step to the next. Mark the length that needs to be cut off using a sharpie or pencil. If the tread is a double return tread, you will not need to make any further cuts as it has been manufactured to your provided dimensions. As a pro tip, use a piece of scrap wood to push the tread out at the return area. This allows you to properly scribe the skirt before cutting, which will help give you an exact fit and cut for your tread. Use a miter saw to make the necessary cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11049-1</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Measure Staircase Treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11049-2</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Measure Staircase Treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11049-3</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Measure Staircase Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11047-1</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Measure Staircase Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11047-2</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Measure Staircase Treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11047-3</loc>
    <lastmod>2026-09-21T15:21:37.697Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — Measure Staircase Treads</video:title>
      <video:description>Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-21T15:21:37.697Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11039-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lC7fUCZ8uOs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crawl Space Cleanup — Crawl Space Encapsulation</video:title>
      <video:description>Begin by thoroughly cleaning the crawl space. This involves removing all existing debris, such as old, damaged, or wet insulation, construction waste, fallen leaves, and any signs of pest activity. The goal is to create a clear working area and eliminate sources of moisture or contaminants. Personal protective equipment (PPE) is crucial for this step due to the potentially hazardous environment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lC7fUCZ8uOs</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11039-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vK8k-S_HGzw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Out Crawl Space — Crawl Space Encapsulation</video:title>
      <video:description>The first step in encapsulating a crawl space is to perform a thorough &apos;Clean Out&apos;. This involves removing all old or damaged insulation, which can often be damp, moldy, or infested with pests, as well as any existing plastic sheeting (vapor barrier) and general debris. This creates a clean and clear working environment, essential for the subsequent installation steps and to prevent trapping existing moisture or contaminants under the new encapsulation system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vK8k-S_HGzw</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11039-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/W4sR7KL6ULM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Crawl Space Preparation and Cleanup — Crawl Space Encapsulation</video:title>
      <video:description>Begin by assessing the current state of the crawl space. This typically involves removing any existing, often damaged or damp, insulation such as pink fiberglass insulation. Clear out all debris, trash, and organic matter from the crawl space floor. The video shows the initial dirty condition of the crawl space with loose insulation, highlighting the need for thorough cleanup. Level the ground as much as possible to prepare for the vapor barrier installation. Ensure the area is as clean and free of obstructions as possible before proceeding to the next steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/W4sR7KL6ULM</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11040-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2g6v90gQPck/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Air Seal Sill Plate to Foundation Wall — Crawl Space Encapsulation</video:title>
      <video:description>The most overlooked area for air sealing is the joint between the sill plate (the pressure-treated wood sitting on top of the foundation) and the foundation wall itself. This is a common pathway for air to move from the outside into the crawl space, or vice-versa. To seal this critical joint, apply a bead of caulk or a small bead of spray foam all the way around the inside perimeter where the sill plate meets the concrete block or foundation wall. This ensures a tight seal against air infiltration. A warning is given to consult with a pest control company before sealing this area, as some companies may advise against it due to termite inspection requirements or other concerns. New homes may already have a sealant in this location.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2g6v90gQPck</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11040-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VAQYMSUQDSs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Foundation Wall Penetrations — Crawl Space Encapsulation</video:title>
      <video:description>Inspect the inside of the foundation walls for any gaps or holes where plumbing pipes, electrical conduits, HVAC lines, or other utilities penetrate. These openings are significant sources of air leakage. Use appropriate sealant, such as black sealant shown in the video, to thoroughly seal around these penetrations to create an airtight barrier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VAQYMSUQDSs</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11040-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Genu_Plnp2M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preliminary Air Sealing with Caulk — Crawl Space Encapsulation</video:title>
      <video:description>Apply a high-quality, 40-year caulk around the edges of the rim joist. Focus on running a continuous bead of caulk along the top and bottom edges where the rim joist meets the subfloor and the sill plate, respectively. These areas are the most critical for air leakage. Caulk can also be applied to any other visible cracks or gaps to provide a preliminary air seal before applying foam.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Genu_Plnp2M</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11041-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Moe34WaaFSE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Vapor Barrier on Ground and Walls — Crawl Space Encapsulation</video:title>
      <video:description>Roll out a heavy-duty, reinforced vapor barrier (typically 10-20 mil thick polyethylene) over the entire crawl space ground, overlapping seams by at least 6-12 inches. Secure it to the ground using specialized anchors or by temporarily weighing it down. Then, extend the vapor barrier up the foundation walls. It should run from the ground up to the sill plate or at least 6-12 inches (15-30 cm) above grade. Secure the barrier to the foundation walls using masonry fasteners or a robust adhesive specifically designed for concrete. The &apos;after&apos; shots clearly show a continuous, clean white liner covering both the ground and extending up the foundation walls, indicating this step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Moe34WaaFSE</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11041-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wG2Kd3DgMmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Ground Vapor Barrier — Crawl Space Encapsulation</video:title>
      <video:description>Next, unroll and spread large sheets of heavy-duty white plastic sheeting, which serves as the vapor barrier, over the entire ground surface of the crawl space, covering the previously laid matting. Ensure that the vapor barrier extends up the foundation walls to meet the reflective insulation and overlaps adequately where multiple sheets are used. The goal is to create a continuous and impermeable layer over the ground.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wG2Kd3DgMmc</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11041-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/euUDSisFgOs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Encapsulate with Vapor Barrier — Crawl Space Encapsulation</video:title>
      <video:description>A heavy-duty, white vapor barrier, specifically referred to as &apos;CleanSpace,&apos; is unrolled over the TerraBlock rigid insulation panels, covering the entire crawl space floor. Workers then secure this liner to the wooden framing (such as floor joists or rim joists) using a drill and appropriate fasteners. They meticulously apply specialized tape to seal all seams of the vapor barrier, and also tape it to the spray-foamed foundation walls, creating a complete and airtight seal. A worker is also seen carefully cutting the liner to fit around an opening, ensuring all edges are sealed. This process fully isolates the crawl space environment from ground moisture and outside air.</video:description>
      <video:player_loc>https://www.youtube.com/embed/euUDSisFgOs</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11042-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Fo9iwsBZWo0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Crawl Space Vents — Crawl Space Encapsulation</video:title>
      <video:description>The first essential step, especially for those on a budget, is to seal off any existing open vents in the crawl space foundation. This is achieved by cutting pieces of rigid foam board to precisely fit each vent opening. Once the foam board is snugly in place, expanding spray foam is applied around all the edges and gaps to create a complete and airtight seal. This method is reversible, allowing for removal if alternative solutions are preferred later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Fo9iwsBZWo0</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11042-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lC7fUCZ8uOs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sealing Vents and Outside Air Leaks — Crawl Space Encapsulation</video:title>
      <video:description>A critical step in encapsulation is eliminating outside air entry. This means sealing all crawl space vents and any other penetrations or gaps in the foundation walls that connect to the exterior. Use rigid foam board insulation cut to size to seal vents, securing them with caulk or spray foam. For smaller cracks or gaps, use an appropriate sealant to create an airtight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lC7fUCZ8uOs</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11042-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9nCGqp63-MI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Crawl Space Vents — Crawl Space Encapsulation</video:title>
      <video:description>It&apos;s essential to properly seal all crawl space vents. Simply stuffing fiberglass insulation or using loose foam board is insufficient, as these methods can be dislodged by wind or may not provide an adequate seal. Instead, use a durable material like R10 termite-resistant foam board, applied with spray foam adhesive, to both seal and insulate the vents effectively. This prevents outside humid air from entering the crawl space and negates the effort of dehumidification.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9nCGqp63-MI</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11043-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rl5Vxkvne2A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wall Insulation — Crawl Space Encapsulation</video:title>
      <video:description>This step involves installing 2-inch thick SilverGlo foam boards on the interior of the crawl space walls. These boards are made of expanded polystyrene foam infused with graphite, which reportedly boosts their R-value by 24% compared to standard EPS foam. Crucially, they feature a radiant barrier on both sides that also functions as a vapor barrier. This dual-purpose barrier reflects heat back into the house during colder months and prevents moisture from migrating through the walls into the crawl space, thereby enhancing insulation and controlling humidity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rl5Vxkvne2A</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11043-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5LKQWCT5p38/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Rigid Foam Wall Insulation — Crawl Space Encapsulation</video:title>
      <video:description>Begin installing rigid foam insulation panels, such as those visually similar to &apos;ExtremeBlock Insulation,&apos; along the interior perimeter walls of the crawlspace. Measure each section of the wall carefully and cut the foam panels to fit precisely using a utility knife or saw. Secure the panels to the foundation walls using appropriate fasteners designed for masonry or concrete, such as concrete screws. Ensure a tight fit with minimal gaps between panels and at corners. The video shows a worker using a drill to install these panels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5LKQWCT5p38</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11043-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3YOIzEzEwWo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Strategy 1: Install Taped Rigid Foam Insulation — Crawl Space Encapsulation</video:title>
      <video:description>Implement the first insulation strategy: using taped rigid foam. Install sheets of rigid foam insulation (such as XPS, EPS, GPS, or polyisocyanurate) on the interior side of the concrete stem walls and around the rim joists. Crucially, seal all connections, including joints between foam boards and to the rim joists, using a fluid-applied joint and seam filler compound or expanding foam sealant. This creates both a vapor retarder to prevent condensation on cold concrete surfaces and an air barrier to control air leakage. For an extremely high-performance assembly, consider installing rigid insulation underneath a vapor barrier on the crawl space floor, then pouring a 2-inch &apos;rat slab&apos; (thin topping slab) over it. This improves durability and provides a smooth, accessible surface for maintenance of mechanical systems.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3YOIzEzEwWo</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11044-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qNQafR_5ALk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Dehumidifier — Crawl Space Encapsulation</video:title>
      <video:description>Install a high-capacity, robust dehumidifier suitable for a crawlspace environment. Place the unit in a central location for optimal air circulation. Crucially, set up a permanent drainage line from the dehumidifier to the sump pump basin or an exterior drain so it can operate continuously without needing to be manually emptied. This is key to actively managing and maintaining low humidity levels in the now-sealed space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qNQafR_5ALk</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11044-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c6_2tbCIq2M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Dehumidifier — Crawl Space Encapsulation</video:title>
      <video:description>Install a dehumidifier in the crawlspace. Ensure the dehumidifier is perfectly level during installation so that any accumulated moisture can flow correctly to its pump. Drill a small hole in the foundation below the band seal from inside the crawlspace, ensuring it exits outside. Connect the dehumidifier&apos;s drain hose to the condensate pump (if external) and route the hose through the drilled hole to drain outside. Finally, if desired, install ducting to distribute the dehumidified air effectively throughout the crawlspace.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c6_2tbCIq2M</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11044-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oe6HqPsDDKg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Implement Dehumidification and Monitor — Crawl Space Encapsulation</video:title>
      <video:description>After encapsulating and insulating the crawl space, install a crawl space dehumidifier. Position the dehumidifier in a central location for optimal air circulation. Ensure it is properly drained, either to a condensate pump that discharges outside or directly to a floor drain if available. Set the dehumidifier to maintain a relative humidity level between 50-55%. Regularly monitor the humidity levels with a hygrometer and periodically check the dehumidifier for proper operation and clean its filter as needed to maintain a dry, healthy, and protected crawl space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oe6HqPsDDKg</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11045-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5LKQWCT5p38/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Sealing and Inspection — Crawl Space Encapsulation</video:title>
      <video:description>After installing the rigid insulation and vapor barrier, conduct a thorough final inspection of the entire crawlspace. Check all seams, corners, and penetrations (like pipes or wiring) to ensure they are completely sealed and airtight. Apply additional vapor barrier tape or sealant as needed to any areas that appear compromised. The goal is to create a fully sealed and encapsulated environment that is dry, clean, and free from external air and moisture intrusion. This completed encapsulation will protect your home&apos;s structure and improve indoor air quality and energy efficiency.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5LKQWCT5p38</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11045-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wG2Kd3DgMmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Finalize Encapsulation — Crawl Space Encapsulation</video:title>
      <video:description>Once all insulation and vapor barrier components are installed and sealed, conduct a thorough visual inspection of the entire crawl space. Check for any unsealed seams, loose fasteners, or gaps in the insulation. Ensure the vapor barrier is taut and completely covers the ground. If part of a full encapsulation system, confirm that any additional equipment, such as a dehumidifier, is properly positioned and operational to maintain optimal humidity levels. The end result should be a clean, dry, and energy-efficient crawl space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wG2Kd3DgMmc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11045-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dEHUdACaZmM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Cleanup — Crawl Space Encapsulation</video:title>
      <video:description>After all cutting, taping, and sealing are complete, conduct a final inspection of the entire vapor barrier installation. Ensure that all seams, edges, and penetrations (such as around electrical boxes and wires) are securely sealed with either blue tape or acoustic sealant, as appropriate. Confirm that there are no visible gaps or tears that could compromise the barrier&apos;s effectiveness. Clean up any remaining tools or materials from the work area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dEHUdACaZmM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11026-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p2AXZxU7YPQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Power — Garbage Disposal Repair</video:title>
      <video:description>For your safety, if the reset button did not work, you must completely cut power to the unit. First, turn off the wall switch that operates the disposal. Then, go to your home&apos;s main electrical panel (circuit breaker box). Locate the breaker that controls the garbage disposal and flip it to the &apos;OFF&apos; position. This ensures no electricity can reach the unit while you are working on it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p2AXZxU7YPQ</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11026-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6OvwfqlJckk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — Garbage Disposal Repair</video:title>
      <video:description>Locate the breaker switch that powers the garbage disposal at the electrical panel and turn it off. Test the outlet to make sure that the power is off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6OvwfqlJckk</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11026-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AgZeozmFqQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — Garbage Disposal Repair</video:title>
      <video:description>Before working on the disposal, ensure all power is cut off for safety. If the unit is hardwired, go to your home&apos;s breaker box, locate the breaker for the garbage disposal, and flip it to the &apos;off&apos; position. It&apos;s a good practice to place a note on the breaker box to prevent someone from accidentally turning it back on. If your disposal plugs into an outlet under the sink, simply unplug the power cord.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AgZeozmFqQY</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11027-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OFsohUPFfIU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Manually Free the Jammed Blades — Garbage Disposal Repair</video:title>
      <video:description>Ensure the power switch for the garbage disposal is in the OFF position. Insert an Allen wrench (also known as a jam-buster wrench if it came with the unit) into the hexagonal socket located in the center of the disposal&apos;s bottom plate. Firmly work the wrench back and forth to manually turn the motor and the grinding blades. Continue this rocking motion until you can feel the blades moving freely, which indicates the obstruction has been dislodged.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OFsohUPFfIU</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11027-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p2AXZxU7YPQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Manually Free the Jam — Garbage Disposal Repair</video:title>
      <video:description>Locate the hexagonal opening in the very center of the bottom of the disposal unit. Insert a garbage disposal jam buster tool or a 1/4-inch hex wrench into this opening. Apply force to turn the wrench back and forth. This manual rotation will move the internal flywheel and blades, which should dislodge whatever object is causing the jam. Continue rocking it back and forth until it moves freely in a full circle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p2AXZxU7YPQ</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11027-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kzTPox1kARo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear a Jammed Disposal — Garbage Disposal Repair</video:title>
      <video:description>If the disposal hums but doesn&apos;t spin (indicating a jam), ensure the power switch is turned OFF. Use the Jam Buster Wrench (or 1/4-inch hex Allen wrench) by inserting it into the hex receptacle located in the center of the bottom of the disposal unit. Twist the wrench back and forth forcefully to dislodge any jammed debris and free the grinding plates. Continue twisting until the grinding plates turn freely with minimal effort (you should be able to spin the wrench with a finger or two). Once the jam is cleared, remove the wrench from the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kzTPox1kARo</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11028-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gQlzLb7en4A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Jam with Allen Key — Garbage Disposal Repair</video:title>
      <video:description>If the reset button was not tripped, or if resetting it did not fix the jam, you will need to manually dislodge the grinding plates. Locate the hexagonal hole in the center of the underside of the garbage disposal unit. Take an appropriate size Allen key (often a 1/4 inch or 3/8 inch, typically included with new disposals, or available in a standard Allen key set) and insert it into this hole. Firmly turn the Allen key clockwise and counter-clockwise repeatedly. This action rotates the motor shaft and the grinding plates, helping to free any objects caught between them. Continue turning until the Allen key can move freely in both directions, indicating the jam has been cleared.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gQlzLb7en4A</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11028-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x0J7oCTVbwM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Internal Jam with Hex Key — Garbage Disposal Repair</video:title>
      <video:description>Next, address the jammed grinding plates. Look for a small hexagonal hole at the very bottom center of the garbage disposal unit. This is a manual override port. Insert a 1/4-inch hex key (also known as an Allen wrench) into this hole. Twist the hex key back and forth vigorously. This action will manually turn the motor shaft and help dislodge whatever is binding the grinding plates. If an installer left a hex key taped to the unit or in a nearby junk drawer, use that. Continue turning until you can freely rotate the grinding plates. Remove the hex key once the plates move freely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x0J7oCTVbwM</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11028-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/if0T2gdMNuA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear the Jam Manually — Garbage Disposal Repair</video:title>
      <video:description>With the Allen wrench securely in place, turn it back and forth in both directions. You may need to apply a fair amount of force, as the obstruction can make it stiff. Continue twisting the wrench until you feel the motor shaft loosen and the wrench can turn freely in a full rotation. This action helps to dislodge whatever is jamming the grinding plates inside the disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/if0T2gdMNuA</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11029-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q__ZEvGYYAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Reset Button — Garbage Disposal Repair</video:title>
      <video:description>If the disposal is still humming or not operating, locate the reset button, typically a small red button on the bottom of the unit. Press this button firmly to reset the overload protector. Then, attempt to switch the disposal on again.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q__ZEvGYYAc</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11029-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7tvi6zoBl-k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press the Reset Button — Garbage Disposal Repair</video:title>
      <video:description>Locate the small reset button on the bottom of the garbage disposal unit. It is typically a red button. If the disposal&apos;s motor has overheated due to a jam or being overloaded, this internal breaker will trip. Firmly press the button to reset it. You may hear a distinct &apos;click&apos; sound if it was tripped.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7tvi6zoBl-k</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11029-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CXKJH4NQDb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Reset Button — Garbage Disposal Repair</video:title>
      <video:description>Locate the small, typically red, reset button on the bottom of the garbage disposal unit. If your disposal was completely silent, this button may have popped out. Press it firmly to reset it. Note that if the disposal was humming, the problem is a jam, and resetting the button will not fix the underlying issue, but it&apos;s a good practice to check.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CXKJH4NQDb4</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11030-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gQlzLb7en4A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Leaks — Garbage Disposal Repair</video:title>
      <video:description>While under the sink, take a moment to visually inspect the garbage disposal unit and its associated plumbing for any signs of water leaks. Check around the top mounting collar where it connects to the sink, the discharge pipe leading to the drain, and the main body of the disposal. Run a hand along these areas to feel for any dampness. Water leaks can indicate a compromised seal or a crack in the housing, which might necessitate replacement of the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gQlzLb7en4A</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11030-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QuJmkG4Nw2M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Leak Inspection — Garbage Disposal Repair</video:title>
      <video:description>If your garbage disposer is leaking water, begin by visually inspecting the unit and its connections to locate the source of the leak. Pay close attention to the area where the disposer meets the sink. Use a flashlight and paper towels to help pinpoint dripping water. The video highlights five common areas where leaks originate. This initial step is about observing and narrowing down the potential problem area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QuJmkG4Nw2M</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11030-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ofvv_aDZw1A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — Garbage Disposal Repair</video:title>
      <video:description>After all connections are made, turn on the water faucet to allow water to run into the sink and through the disposer&apos;s drain. Go underneath the sink and carefully inspect all plumbing connections, including the sink flange, the discharge tailpipe, the drain trap, and the dishwasher hose connection, for any signs of leaks. A mirror can be used to check hard-to-reach or obscured areas for drips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ofvv_aDZw1A</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11031-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8iZmZ9jr_pE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Plumbing — Garbage Disposal Repair</video:title>
      <video:description>With the disposal securely mounted, reconnect all plumbing lines. First, attach the dishwasher drain hose to the dishwasher inlet port on the side of the disposal. Secure it with a hose clamp, tightening it with a screwdriver. Next, reconnect the main drain pipe (P-trap) to the disposal&apos;s bottom outlet. Ensure all washers and nuts are correctly positioned and hand-tighten the nuts, then use a wrench to snug them up, being careful not to overtighten and crack the plastic pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8iZmZ9jr_pE</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11031-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gIrGYoRivCc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Tightening and Leak Check Prep — Garbage Disposal Repair</video:title>
      <video:description>Once all pipes and hoses are loosely connected, it&apos;s time for final tightening. First, use the Allen key to tighten the disposal&apos;s mounting ring to the sink flange. The presenter warns against overtightening, as it can over-compress the bezel and make future removal difficult. Tighten the mounting ring just enough to be secure, leaving room for the Allen key to be inserted in the future. Next, hand-tighten the nuts on the main drain pipe connections. The presenter advises against using tools on plastic drain pipes, as this can lead to cracking; hand-tightening is sufficient. Finally, tighten the hose clamp on the dishwasher drain hose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gIrGYoRivCc</video:player_loc>
      <video:duration>112</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11031-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q47HmlojgKE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Connection and Tightening — Garbage Disposal Repair</video:title>
      <video:description>Once all glued components are assembled, make the final connections. Attach the assembly to the sink tailpiece and the drain pipe in the wall using the slip-joint nuts and washers. Hand-tighten the nuts as much as possible, then use channel-lock pliers to give them an additional quarter-turn to ensure a snug, leak-proof seal. Do not over-tighten, which could crack the plastic components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q47HmlojgKE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11032-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/19NzYfH2CHM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Washer/Gasket — Garbage Disposal Repair</video:title>
      <video:description>Identify and remove the old slip joint washer or gasket. This component is crucial for creating a watertight seal and may be compressed or damaged, causing the leak.</video:description>
      <video:player_loc>https://www.youtube.com/embed/19NzYfH2CHM</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11032-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ok1LgrnmI9c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Replace Gaskets — Garbage Disposal Repair</video:title>
      <video:description>If a leak originates from between two parts of the head assembly, disassemble those parts and carefully inspect the gasket in the female connection. The gasket is essential for completing the seal in hose-threaded connections. Check if the gasket is missing, damaged, or misaligned. If it&apos;s misaligned, simply reposition it correctly at the bottom of the female connection and retest the assembly. If the gasket is missing or damaged, it must be replaced. Replacements are inexpensive and widely available.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ok1LgrnmI9c</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11032-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CpgCqpKSQP4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Replace the O-Ring — Garbage Disposal Repair</video:title>
      <video:description>If reconnecting doesn&apos;t stop the leak, disconnect the fitting again. Visually inspect the internal black rubber O-ring for any signs of damage, such as cracks, tears, or debris. If the O-ring is damaged, it may be possible to replace it. Use a small dental pick to carefully hook and remove the old O-ring and the plastic components behind it. Apply a thin layer of silicone-based plumber&apos;s grease to a new O-ring and carefully install it and the other components in the correct order. If a replacement O-ring is not available or if the fitting body is damaged, replace the entire fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CpgCqpKSQP4</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11033-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RWw-l0cOSY4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test Disposal — Garbage Disposal Repair</video:title>
      <video:description>After confirming all plumbing and electrical connections are secure, return to your electrical panel and flip the circuit breaker for the garbage disposal back to the ON position. Go back to the kitchen, turn on the water in the sink, and then flip the disposal switch to test the new unit. Listen for proper operation and check for any leaks around all the newly made connections. If there are no leaks and the disposal functions correctly, your installation is complete!</video:description>
      <video:player_loc>https://www.youtube.com/embed/RWw-l0cOSY4</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11033-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cdqnb2cuvK0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test New Disposal Installation — Garbage Disposal Repair</video:title>
      <video:description>Return to your home&apos;s main electrical panel and turn the circuit breaker back on for the garbage disposal. Go to the kitchen sink, turn on the water faucet, and visually inspect all plumbing connections (dishwasher hose, main drain pipe, and around the sink flange) for any leaks. Finally, turn on the garbage disposal switch to ensure it operates correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cdqnb2cuvK0</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11033-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q4n39CiBTPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Installation — Garbage Disposal Repair</video:title>
      <video:description>The final step is to test the installation. Turn the power back on at the circuit breaker. Run cold water into the sink and then turn on the garbage disposal. Let it run for a moment while you thoroughly check all the plumbing connections for any signs of leaks. Check around the sink flange, the dishwasher hose connection, and the main drain pipe connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q4n39CiBTPI</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11021-1</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J4Pg0uZ_9Jw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Test and Inspection — Stair Tread Installation</video:title>
      <video:description>Once all structural components, treads, and risers are installed, conduct a thorough final inspection. Walk up and down the completed stairs several times, paying close attention to their feel. Check for any wobbling, squeaking, or unevenness. Ensure all connections are tight and secure. This &quot;final test&quot; confirms the stability, safety, and comfort of the newly built staircase. Any minor adjustments or final cosmetic touches, like sanding or preparing for finish coatings, would be addressed after this evaluation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J4Pg0uZ_9Jw</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11021-2</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mjZqhxztKJ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Cleanup — Stair Tread Installation</video:title>
      <video:description>After the adhesive has fully cured and all wooden coverings are securely in place, carefully remove all temporary weights from the stair treads and landing panels. Inspect the entire staircase for any loose areas, gaps, or imperfections. Clean up any sawdust, adhesive residue, or debris, using a broom or vacuum cleaner, to reveal the finished wooden staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mjZqhxztKJ8</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11021-3</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/D9nun_rx--c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalize Tread Installation and Inspect — Stair Tread Installation</video:title>
      <video:description>After all treads are installed, inspect them for any protruding screw heads or uneven spacing. Make any necessary adjustments by tightening screws or repositioning boards. Apply any final finishing touches, such as cleaning the surface and inspecting the overall stability of the stair structure. This ensures safety, durability, and a polished final appearance for the deck stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/D9nun_rx--c</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11025-1</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Risers — Stair Tread Installation</video:title>
      <video:description>Start by installing the new risers. Use a pencil to mark the height of the riser on the inner stringer. If the height of the riser is consistent, multiple pieces can be cut in advance using a table saw set at the appropriate angle (e.g., 5 degrees as shown in the video). Apply a strong construction adhesive, such as PL Premium, to the back of the riser before placing it firmly against the existing stair structure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>90</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11025-2</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Risers (Counter Stairs) — Stair Tread Installation</video:title>
      <video:description>After installing all the treads, proceed to measure, cut, and glue each counter stair (riser). Measure the height and width of the space between each newly installed tread. Cut the new wooden risers to fit these dimensions precisely. Apply construction wood adhesive to the back of each riser and firmly press it into place, ensuring a tight fit between the treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11025-3</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4UAv_YIlfiQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flooring and Risers — Stair Tread Installation</video:title>
      <video:description>With the structural extensions completed, the next step is to install the new flooring onto the now uniformly 11-inch deep treads. Simultaneously, new risers are installed to cover the vertical face of each step, concealing the added lumber and providing a clean, finished look. Special attention should be given to creating a &apos;bull nose&apos; return on the front edge of the bottom step where it meets the wall, ensuring a smooth and aesthetically pleasing transition.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4UAv_YIlfiQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11024-1</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Stair Treads — Stair Tread Installation</video:title>
      <video:description>Each stair in a staircase is often slightly different in length, so it&apos;s crucial to measure and cut each new tread individually. Place an old, removed stair tread side-by-side with a new, uncut tread. Use the old tread as a template to mark the exact length needed on the new tread with a pencil. The presenter uses a circular saw for cutting; a table saw is another suitable option. When operating the circular saw, ensure both hands are firmly on the tool and your feet are well out of the way to prevent accidents, as this is a common point of injury.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11024-2</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Treads — Stair Tread Installation</video:title>
      <video:description>After the risers are installed, measure the depth and length of each individual stair tread. According to these measurements, cut your new hardwood treads. It&apos;s crucial to be accurate, as even small errors can lead to visible gaps. You may need to make slight adjustments to ensure a gap-free fit. A track saw, set at a 5-degree angle as demonstrated, can be particularly useful for making precise, straight cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11024-3</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Stair Tread Installation</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11023-1</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9iOsbprpe5g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Carpet &amp; Prepare Subtreads — Stair Tread Installation</video:title>
      <video:description>The project begins by showing existing carpeted stairs, which are then stripped of their old carpet, revealing the wooden subtreads and risers underneath. To enhance stability and prevent future squeaks, 2-inch deck screws are driven into the subtreads using a Milwaukee cordless drill. Subsequently, the installer carefully checks for any exposed staples or nails left over from the carpet installation, removing them with a hammer or pry tool, or hammering them flush with the wood surface. This ensures a perfectly smooth and clean base, essential for the proper installation of the new treads and risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9iOsbprpe5g</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11023-2</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrqO6WsnouE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Surface by Filling Holes — Stair Tread Installation</video:title>
      <video:description>After removing all carpet, inspect the stair treads and risers for any cracks, gaps, or holes left by nails and staples. Apply a sandable, water-based wood filler to these imperfections, ensuring a smooth, level surface. The video shows using Varathane Sandable Wood Filler, Natural.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrqO6WsnouE</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11023-3</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Loose Stairs — Stair Tread Installation</video:title>
      <video:description>Inspect the existing stair structure for any loose or squeaky areas. Use a hammer and nails or a drill and screws to firmly secure any loose treads or risers. This step ensures a stable and noise-free foundation for your new hardwood stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11022-1</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11022-2</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11022-3</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Treads — Stair Tread Installation</video:title>
      <video:description>Starting from the bottom step of the staircase, carefully align the first prepared stair tread onto the wooden step. Ensure the tread is centered, positioned straight, and covers the desired area of the step. Once satisfied with the placement, firmly press the tread down across its entire surface, paying close attention to the edges and corners, to securely bond the adhesive to the wood. The installer in the video kneels and crawls up the stairs, applying significant body weight to ensure good contact. Repeat this alignment and pressing process for all remaining stairs, working your way up the staircase one tread at a time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11020-1</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hVs1YaoZyKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Carefully Remove Old Treads — Stair Tread Installation</video:title>
      <video:description>Carefully remove the old, damaged deck treads. For boards that are already loose, gently pry them up with a large screwdriver, avoiding excessive force. If a board is tightly secured, do not immediately reach for a pry bar, as this can damage the fragile stair stringers underneath. Instead, use a large screwdriver and a hammer to split the board into pieces by driving the screwdriver beside the nail heads. This action forces the wood grain around the nails to split, allowing the pieces to be removed easily without stressing the stringers. For very stubborn boards that require more force, use a pry bar, but apply leverage as slowly and carefully as possible. It is crucial to prevent damage to the stair stringers, which are the structural pieces below the treads. These stringers are shaped like a sawtooth, with diagonal grain lines that make them very weak and prone to fracturing. Avoid hitting them sideways or applying excessive leverage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hVs1YaoZyKA</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11020-2</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KMoh0dp78ek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Wooden Treads — Stair Tread Installation</video:title>
      <video:description>With the new treads prepared, it&apos;s time to remove the old wooden treads that were beneath the carpet. Use a pry bar and hammer to carefully pry up each old tread from the stair stringers. The video shows the treads being removed one by one, exposing the framework beneath. Collect the removed treads and any remaining nails for disposal. After removing all old treads, clean up any debris, dust, or old adhesive from the stringers and risers, possibly using a vacuum or shop vac, to ensure a clean surface for the new tread installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KMoh0dp78ek</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11020-3</loc>
    <lastmod>2026-11-19T07:06:25.079Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/diTxF53fdrA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Physically Remove Old Stair Treads — Stair Tread Installation</video:title>
      <video:description>For the initial removal of the old stair treads, which were extensively glued and nailed, the video suggests using robust tools. Insert a crowbar underneath the edge of an old tread, and then use a sledgehammer to drive the crowbar deeper, creating leverage. Pry the tread upwards forcefully. It&apos;s important to note that the treads, often made of composite wood, are likely to break into multiple pieces during this process due to the strong adhesive. The video shows broken pieces with nails still attached, indicating the force needed and the integrity of the original installation. After the main pieces are detached, extract any exposed, large nails from the underlying wooden structure using the claw of a hammer or the crowbar.</video:description>
      <video:player_loc>https://www.youtube.com/embed/diTxF53fdrA</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-19T07:06:25.079Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11013-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wMC6QgySBug/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power Cord — Microwave Repair</video:title>
      <video:description>Before proceeding with any further disassembly, locate and unplug the microwave&apos;s power cord. The power cord typically runs through a hole in the upper cabinet directly above the microwave and plugs into an outlet inside the cabinet. Ensure the plug is completely removed from the outlet to disconnect all electrical power from the unit. This is a critical safety step to prevent electrical hazards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wMC6QgySBug</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11013-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MD9UYM3s3fM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power to the Microwave — Microwave Repair</video:title>
      <video:description>Prior to any electrical work, safety is paramount. Open the cabinet above the microwave to locate and unplug the power cord from the wall outlet. Alternatively, if the outlet is inaccessible or you prefer, turn off the corresponding circuit breaker at your home&apos;s electrical panel to completely cut power to the microwave.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MD9UYM3s3fM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11013-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kkRkviUg4-I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prioritize Safety: Unplug Appliance — Microwave Repair</video:title>
      <video:description>Before attempting any internal inspection or repair, it is crucial to prioritize safety. Unplug the microwave oven&apos;s power cord completely from the wall outlet. Microwaves contain high-voltage components, such as capacitors, that can store a lethal electrical charge even when the appliance is unplugged. This step ensures that no power is flowing to the unit before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kkRkviUg4-I</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11014-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kkRkviUg4-I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Outer Casing — Microwave Repair</video:title>
      <video:description>To access the internal components, the microwave&apos;s outer casing needs to be removed. Begin by unscrewing the two screws located on each side of the microwave unit. Next, unscrew the two additional screws found at the back of the microwave. Once all four screws are removed, carefully slide the outer casing backward and then lift it off the main unit to expose the internal wiring and components. This requires gently manipulating the casing to clear any interlocking tabs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kkRkviUg4-I</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11014-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ISZrYGn0Xc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Microwave Casing — Microwave Repair</video:title>
      <video:description>Microwaves often use &apos;anti-tamper&apos; Torx screws to secure the casing. These screws have a small pin in the center of their head, requiring a specialized tamper-proof Torx bit (e.g., TT15, which has a corresponding hole in the center). Locate and remove all such screws from the back and sides of the microwave. Once all screws are removed, carefully slide or lift off the outer metal casing to expose the internal components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ISZrYGn0Xc</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11014-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f2pIExbxQMI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Outer Casing — Microwave Repair</video:title>
      <video:description>Place the microwave on a clean, stable surface protected by a towel. Identify and remove the four security screws on the back panel of the microwave. The video&apos;s presenter previously modified these screws by cutting a slot in their center post with a Dremel tool for easier removal with a flathead screwdriver. Alternatively, a specialized security bit set can be used. Once these screws are removed, the entire outer metal casing (top and sides) can be slid backward and then lifted off the microwave, exposing the internal components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f2pIExbxQMI</video:player_loc>
      <video:duration>127</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11015-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FHNR6c8GQX8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Outer Casing and Initial Visual Inspection — Microwave Repair</video:title>
      <video:description>Locate and remove approximately half a dozen screws holding the outer casing of the microwave. Carefully slide off the back and top cover. Once the cover is removed, avoid touching any internal components, particularly capacitors, transformers, and the magnetron, as they can retain dangerous electrical charges. Perform a general visual inspection of the internal wiring, circuit boards, and the main fuse (a small tube fuse or push-in ATC fuse) for any signs of burning, loose connections, or other damage. Note that the main fuse typically protects the entire microwave&apos;s power input, so it&apos;s unlikely to be the sole cause of a non-spinning turntable if other functions work.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FHNR6c8GQX8</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11015-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CwG7GFnIrN0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Magnetron — Microwave Repair</video:title>
      <video:description>After confirming the microwave is unplugged and the high voltage capacitor discharged, focus on the magnetron. The magnetron is the component responsible for generating the microwaves that heat your food. Carefully disconnect all wires attached to the magnetron&apos;s terminals. Then, attach the leads of your multimeter to the magnetron&apos;s terminals and test for continuity. A functional magnetron should show some continuity between its terminals. If the multimeter shows no continuity, it indicates an open circuit within the magnetron, meaning it is faulty and needs to be replaced. A broken magnetron can also blow a fuse within the microwave, potentially leading to failure of other components. Replacing a magnetron often requires removing mounting screws and carefully handling the fragile internal components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CwG7GFnIrN0</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11015-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CwG7GFnIrN0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety First — Microwave Repair</video:title>
      <video:description>The video begins by stating the common problem: a microwave turning on but not heating food. It introduces three primary components that could be at fault: the high voltage diode, the door switch, and the magnetron. For any internal work on a microwave, it is critical to unplug the appliance from its power source to prevent electrical shock. Next, remove the outer cabinet of the microwave. The specific method for removing the cabinet varies by model, but typically involves unscrewing several screws on the back and sides and then sliding the cover off. Finally, locate and safely discharge the high voltage capacitor using an insulated tool (like a screwdriver with an insulated handle and tip) to short its terminals. This step is extremely important as the capacitor can store a lethal electrical charge even after the microwave is unplugged.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CwG7GFnIrN0</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11016-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q9Hy0XCwKww/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Microwave Shuts Off Intermittently (Door Switch) — Microwave Repair</video:title>
      <video:description>If your Bosch microwave powers off unexpectedly after only a few seconds of operation, an intermittently failing door switch could be the cause. Begin by visually checking each of the door switches for any signs of physical damage, such as overheating, arcing (electrical discharge), or burning. If there are no obvious visual indicators of failure, proceed to test each door switch for continuity using a multimeter. If any of the switches are visibly damaged or provide only intermittent continuity readings, it indicates a faulty switch that requires replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q9Hy0XCwKww</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11016-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kkRkviUg4-I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Door Interlock Switches — Microwave Repair</video:title>
      <video:description>The microwave has multiple door interlock switches designed for safety. The video focuses on three such switches. To test them, disconnect the wires from one of the switches. Using a voltmeter set to resistance mode, measure the continuity across the switch&apos;s terminals. With the door open, a working switch should show an open circuit (&apos;OL&apos;). When the door is manually closed (or simulated as closed by pressing the switch mechanism), it should show a very low resistance (around 0.1-0.2 ohms). Repeat this for all three door switches. The video highlights that one of the bottom switches has a visibly burnt connector, which often causes intermittent or complete failure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kkRkviUg4-I</video:player_loc>
      <video:duration>336</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11016-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0tkgXnve044/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Door Micro Switches — Microwave Repair</video:title>
      <video:description>Locate the door micro switches, which are small, plunger- or lever-activated switches typically positioned around the microwave door latch mechanism. Most microwaves have three such switches: a primary, a secondary, and a monitor switch, each playing a role in ensuring safe operation. Set your multimeter to continuity mode. Test each switch individually by connecting the probes to its terminals. For normally open (NO) switches, they should demonstrate continuity (a beep or low resistance) when the door is closed (meaning the switch is physically activated by the door latch) and no continuity when the door is open. Conversely, for normally closed (NC) switches, they should show continuity when the door is open (switch not activated) and no continuity when the door is closed. Manually activate each switch by pressing its plunger or lever to observe the change in continuity. Faulty door switches are a very common cause of microwave malfunction, preventing it from starting or even causing fuses to blow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0tkgXnve044</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11017-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kkRkviUg4-I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Faulty Door Interlock Switch/Connector — Microwave Repair</video:title>
      <video:description>The root cause of the microwave malfunction was identified as a burnt connector on one of the door interlock switches, as indicated by visible charring. This connector prevents proper electrical contact, leading to the heating failure. To fix this, first, remove the two screws (one top, one bottom) that hold the entire front panel assembly of the door switches. Carefully slide this panel upwards and then outward. The individual microswitches are then disconnected from the panel by carefully prying a small plastic tab and sliding the switch out of its housing. The damaged switch or connector should be replaced, and then the entire assembly reinstalled in reverse order of removal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kkRkviUg4-I</video:player_loc>
      <video:duration>280</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11017-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z5VBeiFIUKM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Switch and Reconnect Wiring — Microwave Repair</video:title>
      <video:description>After identifying the faulty switch(es), purchase replacement parts. The video suggests looking for part numbers on the switch itself or searching online retailers like Amazon by microwave model or switch description. Once you have the new switch, reinsert it into the housing until it clicks securely into place. Reconnect the electrical wires to the prongs, ensuring they match the orientation documented in your earlier reference photo. Repeat this for all switches if multiple were removed or tested.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z5VBeiFIUKM</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11017-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z5VBeiFIUKM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Microwave and Test — Microwave Repair</video:title>
      <video:description>Ensure all switches are securely in place and all wiring is properly connected. Once confirmed, reassemble the microwave casing by sliding the panel back into position and fastening all the screws. Finally, plug the microwave back into the power outlet. Test the microwave by opening and closing the door and attempting to run it to ensure the issue is resolved and it operates safely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z5VBeiFIUKM</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11018-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/euwH51KvZGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reattach Microwave Casing and Review Documentation — Microwave Repair</video:title>
      <video:description>After confirming the microwave&apos;s functionality, carefully place the outer casing back onto the microwave. Ensure it aligns properly with all mounting points. Reinstall all the screws that were removed earlier using a cordless drill or screwdriver, tightening them securely to hold the casing in place. The presenter also highlights that many microwaves, especially older models, may have technical data sheets and wiring diagrams tucked inside the casing, often containing crucial warnings about high-voltage components and specific fuse information.</video:description>
      <video:player_loc>https://www.youtube.com/embed/euwH51KvZGk</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11018-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ISZrYGn0Xc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Microwave Casing (If Successful) — Microwave Repair</video:title>
      <video:description>If the microwave is now working correctly after the fuse replacement, slide the outer metal casing back onto the microwave chassis. Align it properly and then reinsert all the anti-tamper Torx screws using the specialized bit to secure the casing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ISZrYGn0Xc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11018-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MD9UYM3s3fM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Microwave Components — Microwave Repair</video:title>
      <video:description>After confirming the microwave is working, unplug it again to continue with the reassembly. First, position the small metal cover back over the fuse compartment and secure it with the Phillips head screw. Next, align the top vent cover with its mounting slots and push it into place until it snaps securely. Reinstall and tighten the two Phillips head screws that hold the top vent cover in position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MD9UYM3s3fM</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11019-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f2pIExbxQMI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Repaired Microwave — Microwave Repair</video:title>
      <video:description>With the microwave fully reassembled and plugged in, set the clock if it reset due to being unplugged. To test, input a short cooking time, such as 10 seconds, and press the &apos;Start&apos; button. Observe the microwave to ensure the internal light is on, the turntable is spinning, and you hear the characteristic humming sound of the magnetron. If all these functions are present, the repair was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f2pIExbxQMI</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11019-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kkRkviUg4-I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Microwave and Final Functionality Test — Microwave Repair</video:title>
      <video:description>After successfully cleaning or replacing the faulty door switch/connector and reassembling the front panel, slide the outer metal casing back onto the microwave and secure it with all the screws. Plug the microwave back into the wall outlet. To test, place a small amount of water in a microwave-safe container inside the unit. Set a short cooking time, such as 2 or 5 seconds, and press start. Observe if the microwave heats the water and if the internal light turns on. The video demonstrates the microwave successfully heating, indicating the repair was effective.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kkRkviUg4-I</video:player_loc>
      <video:duration>103</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11019-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sSmn1iWdXL4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Power and Test Microwave — Microwave Repair</video:title>
      <video:description>With the new mica wave-guide cover securely installed, the microwave oven&apos;s power cord is plugged back into the electrical outlet. A bowl containing water is then placed inside the microwave, and the appliance is set to run for 30 seconds. This test run is performed to verify that the arcing issue has been resolved and that the microwave is operating safely and effectively without any sparks or unusual sounds.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sSmn1iWdXL4</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11012-1</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Split Level Stairs Upgrade</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11012-2</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Split Level Stairs Upgrade</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11012-3</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Treads — Split Level Stairs Upgrade</video:title>
      <video:description>Starting from the bottom step of the staircase, carefully align the first prepared stair tread onto the wooden step. Ensure the tread is centered, positioned straight, and covers the desired area of the step. Once satisfied with the placement, firmly press the tread down across its entire surface, paying close attention to the edges and corners, to securely bond the adhesive to the wood. The installer in the video kneels and crawls up the stairs, applying significant body weight to ensure good contact. Repeat this alignment and pressing process for all remaining stairs, working your way up the staircase one tread at a time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11010-1</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Split Level Stairs Upgrade</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11010-2</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — Split Level Stairs Upgrade</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11010-3</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Split Level Stairs Upgrade</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11009-1</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Staircase — Split Level Stairs Upgrade</video:title>
      <video:description>Before installing the carpet stair treads, thoroughly clean the entire staircase. Begin by sweeping all wooden steps to remove any loose dust, dirt, or debris. Once swept, use a damp cloth to wipe down each step and the front edge (riser/nose) to ensure no fine dust or residue remains. This creates a clean, smooth surface for the adhesive treads to bond effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11009-2</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Split Level Stairs Upgrade</video:title>
      <video:description>Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11009-3</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sfgZWTtWnVc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stairs — Split Level Stairs Upgrade</video:title>
      <video:description>Begin by removing any existing stair coverings, such as old runners or individual treads, to reveal the bare wooden stairs. Once clear, thoroughly vacuum each stair to remove dust, dirt, and any debris that might prevent the new treads from adhering properly. Ensure the surface is clean and dry.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sfgZWTtWnVc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11011-1</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Split Level Stairs Upgrade</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11011-2</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Treads — Split Level Stairs Upgrade</video:title>
      <video:description>Starting from the bottom step of the staircase, carefully align the first prepared stair tread onto the wooden step. Ensure the tread is centered, positioned straight, and covers the desired area of the step. Once satisfied with the placement, firmly press the tread down across its entire surface, paying close attention to the edges and corners, to securely bond the adhesive to the wood. The installer in the video kneels and crawls up the stairs, applying significant body weight to ensure good contact. Repeat this alignment and pressing process for all remaining stairs, working your way up the staircase one tread at a time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11011-3</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Split Level Stairs Upgrade</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11007-1</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S2bSJvfLR4g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Evaluate and Choose Flooring Style — Split Level Stairs Upgrade</video:title>
      <video:description>The initial step in any flooring DIY project is to select the aesthetic. This video presents two distinct flooring options for consideration. The first option is a light wooden-looking floor, characterized by lighter tones and a contemporary feel, which is shown from [0:02.220] to [0:04.559]. The second option is a darker, more natural-looking brown floor, offering a richer and potentially more traditional or rustic appearance, shown from [0:07.139] to [0:09.000]. Carefully observe both options, considering factors such as existing decor, room size, natural lighting, and personal preference. The goal is to make an informed decision on which style best suits the space and desired outcome of your DIY flooring project before moving on to material purchase and installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S2bSJvfLR4g</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11007-2</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ixUVbgutJ_M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Research and Identify Flooring Needs — Split Level Stairs Upgrade</video:title>
      <video:description>After returning the previous flooring, the homeowner visits Lowe&apos;s to find a suitable replacement. They begin by examining various flooring displays, specifically looking for features like &quot;100% waterproof,&quot; &quot;kid &amp; pet-friendly,&quot; &quot;DIY-Friendly Install Quick, Easy &amp; Stress-Free,&quot; and a &quot;30-Year Warranty.&quot; They observe a sample of &quot;MATRIX Seasalt Hickory&quot; flooring (5.9-in x 48.03-in, 23.63 sq ft/carton, $1.99/sq ft) to understand the product specifications and benefits.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ixUVbgutJ_M</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11007-3</loc>
    <lastmod>2026-09-19T07:55:17.933Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z3t2SHw-0ko/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select and Order Flooring Samples Online — Split Level Stairs Upgrade</video:title>
      <video:description>To select new flooring, the couple uses Revel Woods, an online flooring company. They navigate to the website, initiate a quiz designed to understand their personal style and space requirements, and input project details like the room&apos;s activity level (low for a bedroom) and desired design style (rustic). They also specify preferences for light-colored, wide planks. Based on their selections, the website recommends various collections, allowing them to order up to four samples to physically evaluate in their home.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z3t2SHw-0ko</video:player_loc>
      <video:duration>144</video:duration>
      <video:publication_date>2026-09-19T07:55:17.933Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10998-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eJM0ctipors/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Furnace Filter — Furnace Filter Replacement</video:title>
      <video:description>Next, locate the furnace filter within your heating system. The filter is typically found in the cold air return duct or positioned directly next to the blower compartment. It might be hidden behind an access door, a large return air vent, or a dedicated slot on the side of the furnace unit itself. Carefully inspect the area around your furnace and air ducts to find its exact position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eJM0ctipors</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10998-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YaGJiF_t1Fs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Air Filter — Furnace Filter Replacement</video:title>
      <video:description>The most challenging part of this task is locating the furnace filter, as its placement can vary significantly between different furnace models. The host points to his Carrier brand furnace unit, indicating that filters can sometimes be found behind the main panel, on the side, or at the bottom. In his specific setup, the filter is conveniently located at the bottom of the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YaGJiF_t1Fs</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10998-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a-uH19eqd8g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate HVAC Filter — Furnace Filter Replacement</video:title>
      <video:description>Next, you need to identify the location of your home&apos;s HVAC air filter. The placement can vary significantly between different homes and HVAC system configurations. The video demonstrates two common locations: it might be found behind a return air grill in the ceiling of a central living area or hallway, or it could be directly with the main HVAC unit itself, often housed in an attic or a hall closet. The person in the video first points to a large ceiling vent as a potential filter location, then proceeds to a hall closet where the main HVAC unit and its filter are located near the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a-uH19eqd8g</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10999-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rz8uVr5zIik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Furnace Power — Furnace Filter Replacement</video:title>
      <video:description>Before proceeding with any internal inspection or cleaning, it is absolutely essential to cut off power to the furnace to ensure safety and prevent electrical shock. Locate the dedicated power switch for the furnace, which might be an internal switch or an external power switch near the unit. Flip this switch to the &apos;off&apos; position. Additionally, move to your home&apos;s thermostat and confirm that the system selector switch is set to &apos;off&apos;. This double-check ensures no unexpected power surges or activation while working inside the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rz8uVr5zIik</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10999-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJz6P8uAIEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Power — Furnace Filter Replacement</video:title>
      <video:description>The first and most crucial step is to shut down the power to the furnace for safety. Usually, there is a red power switch located directly on the furnace unit; flip this switch down to the &apos;off&apos; position. If a switch isn&apos;t on the furnace, check the wall directly next to it. In cases where no local switch is found, proceed to the main fuse panel for your residence and turn off the corresponding breaker for the furnace.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJz6P8uAIEc</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10999-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RkN5KLd-U8w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Power to Furnace — Furnace Filter Replacement</video:title>
      <video:description>Before beginning any work on the furnace, ensure electrical safety by shutting off the power. This can be done by flipping the dedicated furnace switch, usually located near the unit, to the &apos;off&apos; position. Alternatively, if no such switch is present, locate and switch off the corresponding circuit breaker in your home&apos;s main electrical panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RkN5KLd-U8w</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11000-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U80dTEGe-d0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open Filter Access Panel — Furnace Filter Replacement</video:title>
      <video:description>The video begins with the demonstrator highlighting the convenience of modern furnace systems for filter changes. He then shows how to access the filter compartment by locating and pulling down two &apos;thumb tabs&apos; positioned on the bottom access panel of the furnace unit. This action releases the panel, allowing it to swing open and reveal the filter slot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U80dTEGe-d0</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11000-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ED3bfesbE_Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Access Panel and Old Filter — Furnace Filter Replacement</video:title>
      <video:description>Once the filter location is identified, you need to access it. For a furnace-mounted filter, this usually involves loosening a couple of simple wing nuts on the sheet metal access panel of the return air duct. Carefully loosen these nuts and set them aside in a safe place so they are not lost. Gently pull down the access panel to reveal the old filter, then slide the old filter out of its slot. Be cautious when handling sheet metal, as the edges can be sharp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ED3bfesbE_Y</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11000-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pqg4c67oiVQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Furnace Filter — Furnace Filter Replacement</video:title>
      <video:description>Locate the front panel of the furnace filter housing. Gently pull the panel straight out to remove it, exposing the old furnace filter. Once exposed, grasp the old filter and pull it straight out of the housing to completely remove it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pqg4c67oiVQ</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11001-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a-uH19eqd8g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Filter — Furnace Filter Replacement</video:title>
      <video:description>Once you&apos;ve located the filter housing (in this case, in a hall closet near the floor), carefully slide out the old, dirty air filter. Before discarding it, take a moment to observe the small arrow printed on the filter&apos;s frame. This arrow indicates the direction of airflow, which is critical for proper installation. Retrieve your new HVAC filter (the video shows a standard pleated air filter). Align the new filter so that its airflow arrow points in the same direction as the old one (typically towards the furnace or air handler, or into the main HVAC unit). Gently slide the new filter into its designated slot until it is fully seated. Finally, close any access doors or covers that were opened to reach the filter housing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a-uH19eqd8g</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11001-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SGYrVgFSzV4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Old Filter with New One — Furnace Filter Replacement</video:title>
      <video:description>Once the furnace is accessible, slide out the old, dirty furnace filter from its designated slot. After removing the old filter, take the new, labeled filter and carefully slide it into the same slot. It is crucial to ensure that the &apos;Air Flow&apos; arrows, which are printed on the cardboard frame of the filter, are pointing in the correct direction. These arrows should always point toward the furnace&apos;s blower and away from the cold air return, ensuring proper air filtration.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SGYrVgFSzV4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11001-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1MPJu-fFKAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Air Filter — Furnace Filter Replacement</video:title>
      <video:description>Once the access door is removed, carefully slide the old, dirty air filter out of its slot. Note the direction of the airflow arrow on the old filter before removal, as the new filter must be installed in the same orientation. Dispose of the old filter responsibly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1MPJu-fFKAc</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11002-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6jV6zSP75tA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Around Filter and Vents — Furnace Filter Replacement</video:title>
      <video:description>After inserting the new filter, take the opportunity to clean any excess dirt and grime accumulated in the area around the filter inside the furnace, using a vacuum cleaner. It&apos;s also a good practice to clean the floor vents throughout your house to remove any dust and debris, improving overall air quality and furnace efficiency. Once all cleaning is complete, close the access panel and turn the furnace back on at the thermostat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6jV6zSP75tA</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11002-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gvE2vQF0KvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Inside Filter Chamber — Furnace Filter Replacement</video:title>
      <video:description>Using a dry, soft cloth, wipe down the inside surfaces of the filter chamber. This helps remove any lingering dust or particles that may have settled within the unit&apos;s interior, ensuring a cleaner environment for the filters.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gvE2vQF0KvQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11002-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ekzTJThiAOk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Filter and Close Compartment — Furnace Filter Replacement</video:title>
      <video:description>Carefully slide the new filter into the compartment, making sure the &apos;AIRFLOW&apos; arrow is pointing correctly towards the furnace. The filter should slide in smoothly and fit snugly. Once the filter is fully inserted and seated, reinstall the filter compartment cover. Secure the cover by re-engaging its tab or tightening the containment screw, ensuring it is properly closed to prevent air leakage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ekzTJThiAOk</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11003-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bAj77lQSM7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert New Furnace Filter — Furnace Filter Replacement</video:title>
      <video:description>The new Filtrete filter is carefully inserted into the filter slot of the furnace. The critical point is to ensure the air flow direction arrow on the filter&apos;s frame points towards the furnace/air handler, indicating the path air takes when drawn into the system. The video shows the person checking the arrow before pushing the filter fully into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bAj77lQSM7Q</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11003-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TVt00HJrZQU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Furnace Filter — Furnace Filter Replacement</video:title>
      <video:description>With the old filter removed, take your new furnace filter. It is crucial to observe the airflow graphic, typically an arrow, printed on the side of the filter. This arrow indicates the direction in which air should flow through the filter. Always ensure this arrow points towards the furnace or air handler, meaning it should point in the direction of the air moving *into* the heating/cooling unit. Carefully slide the new filter into the designated slot until it is fully seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TVt00HJrZQU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11003-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YaGJiF_t1Fs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Filter — Furnace Filter Replacement</video:title>
      <video:description>When installing the new filter, it is crucial to pay close attention to the &apos;airflow&apos; arrow printed on its frame. The host demonstrates that for his furnace, the air comes in from the bottom and goes up into the furnace. Therefore, the airflow arrow on the new filter must point upwards, towards the furnace assembly. He then slides the new filter into the slot and closes the latch, securing it in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YaGJiF_t1Fs</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11004-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mGM5GGMSr2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Close Vent Cover — Furnace Filter Replacement</video:title>
      <video:description>Once the new air filter is properly seated in the vent housing and correctly oriented, close the HVAC return air vent cover. Ensure that all latches or clips are securely fastened to hold the cover firmly in place. This prevents the cover from accidentally falling and ensures that all return air passes through the newly installed filter for optimal filtration.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mGM5GGMSr2U</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11004-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dhIKgoyTb30/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Close and Secure Compartment — Furnace Filter Replacement</video:title>
      <video:description>Once the new filter is properly seated inside the compartment, reattach the metal access cover. Ensure it&apos;s aligned correctly. Then, flip the two plastic latches/clips back into their original, locked position to secure the cover firmly. This completes the air filter replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dhIKgoyTb30</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11004-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/soIj__onLLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Filter and Secure Grille — Furnace Filter Replacement</video:title>
      <video:description>Once the filter is clean, carefully slide it back into its original position within the return air grille. Ensure it is seated correctly and securely. Then, close the grille door firmly, ensuring it latches properly. With the filter reinstalled and the grille closed, your HVAC system is ready for operation with improved air quality and efficiency. If you require further assistance or suspect your appliance needs service, contact a professional.</video:description>
      <video:player_loc>https://www.youtube.com/embed/soIj__onLLc</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11005-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJz6P8uAIEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Close Furnace and Restore Power — Furnace Filter Replacement</video:title>
      <video:description>After the new filter is securely in place, retrieve the furnace door. Align the door with the bottom of the furnace and the corresponding screw holes. Insert the screws and tighten them, either by hand or with a flathead screwdriver, until the door is firmly secure. Once the door is properly reattached and sealed, return to the power switch (on the furnace, wall, or fuse panel) and flip it back up to the &apos;on&apos; position to restore power to your furnace.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJz6P8uAIEc</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11005-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sOcfx5o9-B4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore HVAC Power — Furnace Filter Replacement</video:title>
      <video:description>With the new air filter securely in place, turn the power back on to your HVAC unit. If you used the furnace&apos;s dedicated switch, simply flip it back to the &apos;On&apos; position. If you turned off the power at the circuit breaker, flip the corresponding breaker back to &apos;On&apos;. Your HVAC system should now be ready to operate with its new, clean filter. You can leave spare filters conveniently stored near the furnace so they are always accessible for future replacements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sOcfx5o9-B4</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11005-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oXCT5F3ub7c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Furnace Power — Furnace Filter Replacement</video:title>
      <video:description>Once the new filter is securely in place and any covers or strips are re-attached (if applicable), return to the furnace power switch and flip it back to the &apos;on&apos; position. Your furnace is now ready to operate with a fresh, clean filter, ensuring better indoor air quality and efficient performance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oXCT5F3ub7c</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11006-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJz6P8uAIEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Filter — Furnace Filter Replacement</video:title>
      <video:description>With the bottom door removed, you will have a clear view inside the furnace. The old air filter is usually located on the side of the compartment. Grasp the exposed edge of the filter and firmly pull it straight out of its slot. Once removed, discard the old, dirty filter in the garbage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJz6P8uAIEc</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11006-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B32w6dg-v6Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Filter — Furnace Filter Replacement</video:title>
      <video:description>Once you have your new filters, return to your furnace. The actual replacement process is straightforward. Simply pull the old, dirty filter out from its slot in the furnace system. The old filter will likely be covered in dust and debris, which indicates it was effectively doing its job.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B32w6dg-v6Y</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11006-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IKySBZ9esWQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Filter — Furnace Filter Replacement</video:title>
      <video:description>With the filter housing open, carefully slide the old HVAC filter out of its slot. Depending on how much dust and debris it has accumulated, you may want to immediately place it into a trash bag to prevent airborne particles from spreading throughout the room or falling back into the ductwork. Remove the filter slowly and smoothly to avoid dislodging any captured dirt.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IKySBZ9esWQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10994-1</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — Stair Tread Measurement</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10994-2</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Stair Tread Measurement</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10994-3</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Stair Tread Measurement</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10995-1</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Stair Tread Measurement</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10995-2</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Stair Tread Measurement</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10995-3</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Tread Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10996-1</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Tread Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10996-2</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10996-3</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10997-1</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10997-2</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10997-3</loc>
    <lastmod>2026-11-16T22:17:13.366Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Stair Tread Measurement</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-16T22:17:13.366Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10992-1</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Measure Staircase for Treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10992-2</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Measure Staircase for Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10992-3</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nCu4uIwBOOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Stairs — Measure Staircase for Treads</video:title>
      <video:description>To ensure the carpet runner is long and wide enough, accurate measurements are essential. First, select one stair tread (the horizontal top surface of a step) and measure its depth. Next, measure the height of the riser (the vertical part of the step). Multiply the height by the number of risers and the depth by the number of treads on your staircase. Add these two sums together, then add an additional 6 to 8 inches to account for waste. This total will be the required length of the runner. If using more than one runner, add an additional 12 inches to the total length to account for seams where the two carpet pieces will join. If your staircase includes a landing and you plan to install the runner there, ensure you include the landing area in your measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nCu4uIwBOOE</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10993-1</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Measure Staircase for Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10993-2</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Measure Staircase for Treads</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10993-3</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Measure Staircase for Treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10991-1</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Measure Staircase for Treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10991-2</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Measure Staircase for Treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10991-3</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Measure Staircase for Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10990-1</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Measure Staircase for Treads</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10990-2</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — Measure Staircase for Treads</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10990-3</loc>
    <lastmod>2026-09-17T18:53:29.209Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FMLIFJgz3CE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Rise — Measure Staircase for Treads</video:title>
      <video:description>The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FMLIFJgz3CE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-17T18:53:29.209Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10984-1</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k9vmqg95MUg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Grout Lines — Grout Cleaning</video:title>
      <video:description>Begin by preparing a cleaning solution. The video suggests using a high-concentration dish soap, approximately 30ml (about 1 fluid ounce) or more mixed with 1 liter (about 33.8 fluid ounces) of water. Alternatively, bleach can be used for more stubborn stains. Using a Scotch-Brite scrubbing sponge or similar scrubbing tool, thoroughly clean all grout areas on both the shower walls and the floor where water can reach. Focus on removing any dirt, mold, or mildew that has accumulated in the grout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k9vmqg95MUg</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10984-2</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8FWBj5xZBtI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Cleaning Solution — Grout Cleaning</video:title>
      <video:description>Fill two buckets with warm water. Add a generous amount of dish soap into one of the buckets, ensuring enough soap to create bubbles when mixed. Use the mop to thoroughly mix the dish soap into the warm water until a soapy solution is formed. The dish soap acts as the main cleaning agent.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8FWBj5xZBtI</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10984-3</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eUhk7Ho6KMo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deep Clean the Grout — Grout Cleaning</video:title>
      <video:description>Perform a deep cleaning of the grout lines. This involves getting down on the floor and scrubbing the grout directly. Use a bowl of hot or very warm water mixed with a suitable detergent. Apply the solution to the grout lines and scrub with a scrubbing pad, an old toothbrush, or a specialized scrub brush. Allow the solution to sit for a few minutes to break down grime, then wipe it away with a clean cloth. For high-traffic or heavily soiled areas, you may need to repeat this scrubbing and wiping process multiple times. After the grout lines are visibly clean, mop the entire floor to remove any residual cleaning solution and dirt. The homeowner used various common household cleaners including Dawn dish soap, OxyClean, Borax, Barkeeper&apos;s Friend, Pine-Glo (a Pine-Sol alternative), and even Lysol toilet bowl cleaner for very stubborn areas in the entryway.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eUhk7Ho6KMo</video:player_loc>
      <video:duration>143</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10985-1</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eUhk7Ho6KMo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deep Clean the Grout — Grout Cleaning</video:title>
      <video:description>Perform a deep cleaning of the grout lines. This involves getting down on the floor and scrubbing the grout directly. Use a bowl of hot or very warm water mixed with a suitable detergent. Apply the solution to the grout lines and scrub with a scrubbing pad, an old toothbrush, or a specialized scrub brush. Allow the solution to sit for a few minutes to break down grime, then wipe it away with a clean cloth. For high-traffic or heavily soiled areas, you may need to repeat this scrubbing and wiping process multiple times. After the grout lines are visibly clean, mop the entire floor to remove any residual cleaning solution and dirt. The homeowner used various common household cleaners including Dawn dish soap, OxyClean, Borax, Barkeeper&apos;s Friend, Pine-Glo (a Pine-Sol alternative), and even Lysol toilet bowl cleaner for very stubborn areas in the entryway.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eUhk7Ho6KMo</video:player_loc>
      <video:duration>143</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10985-2</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ULt0qdhtoXU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Grout Cleaner — Grout Cleaning</video:title>
      <video:description>Apply the grout cleaner directly into the grout lines on the tile floor. Allow the cleaner to penetrate the grout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ULt0qdhtoXU</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10985-3</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YiLw30HOfTY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub Grout Lines — Grout Cleaning</video:title>
      <video:description>Following the initial scrub of the tile surface, the presenter focuses on the grout lines. He uses a small brush to thoroughly scrub the dark, dirty grout. He reiterates that because the grout was properly sealed, the dirt has not penetrated but is merely sitting on the surface, making it easy to agitate and lift with the cleaner and brush. The scrubbing action helps to dislodge the trapped dirt from the grout crevices.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YiLw30HOfTY</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10986-1</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YiLw30HOfTY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub Grout Lines — Grout Cleaning</video:title>
      <video:description>Following the initial scrub of the tile surface, the presenter focuses on the grout lines. He uses a small brush to thoroughly scrub the dark, dirty grout. He reiterates that because the grout was properly sealed, the dirt has not penetrated but is merely sitting on the surface, making it easy to agitate and lift with the cleaner and brush. The scrubbing action helps to dislodge the trapped dirt from the grout crevices.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YiLw30HOfTY</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10986-2</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B9N1UIw-tN8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Grout Cleaner and Scrub — Grout Cleaning</video:title>
      <video:description>Spray a suitable cleaner directly onto the dirty grout line. Immediately after application, use a scrubbing brush with stiff bristles to vigorously scrub the cleaner into the grout. This action helps to agitate and break down the accumulated dirt and grime within the porous grout material.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B9N1UIw-tN8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10986-3</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lLcXqjFaLfc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deep Clean Grout Lines with Brush — Grout Cleaning</video:title>
      <video:description>Apply a pH-neutral stone and grout cleaner, which appears as a white foam in the video, directly to the dirty grout lines. Allow the cleaner to dwell for a few minutes as per product instructions to loosen contaminants. Using a small, stiff-bristled grout brush, meticulously scrub all grout lines on both the walls and floor. The scrubbing action helps to agitate the cleaning solution and lift deep-seated dirt, mold, and soap scum from the porous grout. Ensure thorough coverage and scrubbing for effective cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lLcXqjFaLfc</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10987-1</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BuaP0v1l888/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Initial Clean-up — Grout Cleaning</video:title>
      <video:description>Prepare two buckets of water: one for initial rinsing and one with clean water. Begin the initial cleaning of the tiled surface using a well-wrung-out sponge. Wipe the tiles gently, focusing on removing the bulk of the grout film from the surface without pushing too hard into the newly applied grout lines. Rinse the sponge frequently in the initial bucket of water, wringing it out thoroughly each time. The goal at this stage is to remove the majority of the surface grout and residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BuaP0v1l888</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10987-2</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cT1Ap9ZPKRU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mop Up Dirty Solution — Grout Cleaning</video:title>
      <video:description>Once a section of tile has been thoroughly scrubbed, use a string mop and a bucket filled with clean water to mop up the dirty cleaning solution. It is essential to frequently rinse the mop in the bucket and change the water as it becomes dirty. This prevents reapplying grime to the cleaned areas and ensures a sparkling finish. This mopping action is shown in sequence after scrubbing each section.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cT1Ap9ZPKRU</video:player_loc>
      <video:duration>90</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10987-3</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U754kIgjhus/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse the tub and tiles — Grout Cleaning</video:title>
      <video:description>After scrubbing, rinse the entire tub and tile area thoroughly with warm water. You can use a bucket to pour water over the surfaces or run the shower for a short period. This step removes any remaining cleaning solution and loosened grime.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U754kIgjhus</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10988-1</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fVticOkPGL0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wipe Clean and Dry — Grout Cleaning</video:title>
      <video:description>After scrubbing, wipe down the cleaned surfaces with a clean cloth to remove any remaining mold debris and excess solution. The video also shows wiping down areas like washing machine seals, which are prone to mold growth, to ensure all affected spots are addressed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fVticOkPGL0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10988-2</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-btf2dUqXg0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Dry — Grout Cleaning</video:title>
      <video:description>After scrubbing, pick up any residue from the floor. This can be done with a damp mop or a damp cloth. Ensure the floor is thoroughly clean before allowing the surface to dry completely. Drying typically takes 2 to 4 hours, but floor fans can be used to speed up the process. Make sure seams are dry. Once dry, perform a final wipe-down with a dust mop or a Swiffer mop to pick up any remaining dust, footprints, or pet hair, as you do not want to seal these into the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-btf2dUqXg0</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10988-3</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AowpxrGY9TQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Thorough Drying and Final Inspection — Grout Cleaning</video:title>
      <video:description>After extraction, thoroughly dry the cleaned fabric surfaces to prevent the growth of mold or mildew and to avoid unpleasant odors. Use clean, dry microfiber towels to blot and absorb as much residual moisture as possible. For faster drying, use a shop vacuum to further pull moisture from the fabric, or use a fan or air mover. Once dry, perform a final visual inspection of all cleaned areas to ensure no stains or dirt were missed. The goal is a clean, dry, and fresh-smelling interior.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AowpxrGY9TQ</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10989-1</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xKzkVKaYq8I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Grout Sealer for Protection — Grout Cleaning</video:title>
      <video:description>After the newly applied grout has completely dried and cured, which typically takes 24 to 48 hours according to product instructions, it&apos;s time to apply a grout sealer. The presenter recommends 511 Impregnator Sealer by Miracle Sealants. This specific sealer is a penetrative type, meaning it soaks into the grout rather than forming a layer on top, thus preserving the grout&apos;s original look without adding a glossy finish. To apply, use a clean rag or cloth to spread the sealer over the grout lines. Allow it to penetrate for 3 to 5 minutes, then wipe off any excess with a separate clean rag. For enhanced and longer-lasting protection, apply a second coat, ensuring the first coat is fully dry (approximately 2 hours) before applying the next.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xKzkVKaYq8I</video:player_loc>
      <video:duration>119</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10989-2</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9phEzzMX_-w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Grout Sealer — Grout Cleaning</video:title>
      <video:description>After the grout is completely dry (this can take 24-72 hours depending on the product and humidity), it is highly recommended to apply a sealer. The video specifically suggests STONETECH BulletProof Sealer. Apply the sealer using a roller or a paintbrush. Ensure an even coat, then immediately wipe off any excess product with a clean cloth. This step provides maximum stain protection and inhibits the growth of bacteria, mold, and mildew, keeping your grout looking pristine.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9phEzzMX_-w</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10989-3</loc>
    <lastmod>2026-09-17T14:24:05.322Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6Izxx9t1yhA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Sealer — Grout Cleaning</video:title>
      <video:description>Once the grout has fully cured (typically 24-72 hours, consult product instructions), apply a penetrating sealer to protect both the grout and tiles from moisture and stains. The video uses FILA MP90 ECO PLUS High Performance Penetrating Sealer. Pour the sealer into a small container and use a paintbrush to apply it evenly over all grout lines and tile surfaces. Ensure full coverage, but avoid excessive pooling. Always refer to the specific sealer&apos;s instructions for application technique and recommended drying times, as these can vary significantly between products.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6Izxx9t1yhA</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-09-17T14:24:05.322Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10977-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2E30MpLogjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place Test Vials and Remove Caps — Radon Testing</video:title>
      <video:description>On your chosen surface, place both radon gas detector test vials about 6 inches apart. Carefully remove the caps from each of the test vials. This exposes the charcoal inside, allowing it to begin absorbing radon gas from the air. Ensure the vials remain upright and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2E30MpLogjg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10977-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Mfa0kF3d7SQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place the Radon Sampler — Radon Testing</video:title>
      <video:description>Locate the lowest living area of your home, typically the basement or the first floor if there&apos;s no basement. Open the sealed plastic bag that contains the &apos;Radon Sampler.&apos; Carefully remove the paper pouch from the bag. Place the radon sampler on a flat surface in the chosen test area, ensuring that the side labeled &apos;THIS SIDE MUST FACE UPWARD DURING TESTING&apos; is facing up. Leave the sampler undisturbed for 2 to 4 days, as directed by the kit&apos;s instructions. The presenter suggests leaving it for 4 days to maximize sample collection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Mfa0kF3d7SQ</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10977-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vEAVLbd_v-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place the Radon Sampler According to Guidelines — Radon Testing</video:title>
      <video:description>Carefully read the placement guidelines for the radon sampler. Place the sampler on the lowest level of your home that is suitable for occupancy (e.g., a finished or unfinished basement). It should rest on a flat surface with the paper side facing up. The sampler needs to be positioned 2 to 7 feet above the floor, at least 3 feet away from any exterior doors or windows, and at least 6 inches from any wall or large object taller than 6 inches. Do not puncture, rip, tear, peel, or remove the paper side of the sampler. Avoid placing it near heating or air conditioning vents, in areas of constantly moving air, or in high-humidity areas like bathrooms, crawlspaces, or sumps, as these conditions can alter the test results. In humid areas, only test for 48 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vEAVLbd_v-M</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10978-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jObxT3We5jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Deploy the Test Kit — Radon Testing</video:title>
      <video:description>Carefully open the plastic seal of the test kit. Fill out all the required information on the back of the test envelope or card, including the start date, time, and the specific location within your home where the test is being conducted. Insert the provided cardboard opener into the envelope (if your kit design requires it) to ensure proper airflow for radon sampling. Hang the test kit in the lowest lived-in level of your home, away from drafts, direct sunlight, and high heat sources. The kit should be exposed to the air for a minimum of 3 days but no more than 7 days, as explicitly shown in the video&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jObxT3We5jg</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10978-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vEAVLbd_v-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Start the Test and Record Information — Radon Testing</video:title>
      <video:description>Once the radon sampler is properly positioned, carefully remove it from its plastic bag. This action officially starts the radon test. Immediately record the exact start time (hour, minute, AM/PM) and date (month, day, year) on the &apos;Short Term Radon Test Information Form&apos;. Locate the test kit serial number (in this case, starting with &apos;F&apos;) which is typically found on the back of the sampler. Fill in the serial number on the form. It&apos;s recommended to take a photograph of the completed form for your personal records, as the serial number is required if you need to contact the lab for any reason.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vEAVLbd_v-M</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10978-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l63zv5aOdNE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform and Submit the Test — Radon Testing</video:title>
      <video:description>To perform the test, expose the kit for a duration between 48 and 96 hours. Exposure times less than 2 days or more than 7 days will render the test invalid. Accurately register the start date and time, as well as the stop date and time, on the information form provided with the test kit. After completing the exposure, seal the sample in its designated mailer and send it to the lab as soon as possible. The lab typically needs to receive the sample within 10 days of the stop time to process it as valid. If postal services are slow, consider using an expedited shipping method like FedEx or overnight delivery to meet this deadline. Ensure each test kit is returned in its own individual mailer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l63zv5aOdNE</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10979-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vEAVLbd_v-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Observe Closed House Conditions — Radon Testing</video:title>
      <video:description>Before starting the test, ensure your home adheres to &apos;Closed House Conditions&apos; for at least 12 hours. This means all exterior doors and windows must be closed for this period and remain closed throughout the test. Normal entry and exit from the home are permitted, but avoid leaving doors or windows wide open. Heating, cooling, and dehumidifying systems should be run normally. However, avoid using vent or exhaust fans, as these can interfere with air circulation and radon levels, leading to an invalid test. This preparatory step is crucial for accurate results.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vEAVLbd_v-M</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10979-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2E30MpLogjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lock Down Your Home — Radon Testing</video:title>
      <video:description>Before starting the test, ensure that all exterior doors and windows of your home are closed. This &apos;lockdown&apos; period should last for at least 12 hours prior to initiating the radon test. Maintaining a closed environment helps to obtain an accurate sample of the air in your home.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2E30MpLogjg</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10979-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZJ5VBc0xNcw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Maintaining Home Environment During Test — Radon Testing</video:title>
      <video:description>During the radon testing period, it is permissible to maintain normal entry and exit routines from your home. However, it is crucial that all windows remain closed. Opening windows can introduce ventilation into the home, which will cause the radon level displayed on the detector to be artificially lower than the actual concentration, resulting in an inaccurate reading. Keeping windows closed ensures the test environment is stable and representative of typical indoor conditions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZJ5VBc0xNcw</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10980-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2E30MpLogjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Monitor the Test — Radon Testing</video:title>
      <video:description>Leave the activated radon test vials undisturbed for a period of 2 to 4 days. The ideal exposure time is typically between 48 and 96 hours. During this period, it is crucial not to move the vials, open any windows or doors (except for normal entry/exit), or operate any fans or fireplaces. Frequent opening of doors should also be avoided as much as possible to maintain a stable indoor air environment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2E30MpLogjg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10980-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vEAVLbd_v-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Stop the Test and Complete the Information Form — Radon Testing</video:title>
      <video:description>Allow the radon test to run for the recommended period, typically between 48 and 96 hours. Once the testing period is complete (in this case, 48 hours later), record the exact stop time (hour, minute, AM/PM) and date (month, day, year) on the &apos;Short Term Radon Test Information Form&apos;. Also, indicate the &apos;Test Floor&apos; (Basement in this instance), confirm &apos;Closed House Conditions&apos; were met, and select the &apos;Testing Reason&apos; (Personal Knowledge). If the test address differs from your shipping address, complete the relevant section. Note that additional fees apply for testing in New Jersey or for purchasing a &apos;Lab Rush Service&apos;.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vEAVLbd_v-M</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10980-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-_iEEUC9Apg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Conduct the Test Period — Radon Testing</video:title>
      <video:description>Allow all the radon monitors and test kits to operate for the recommended duration. For short-term test kits like Air Chek, this is typically 3 to 7 days. Continuous digital monitors will record data throughout this period. Maintain a &apos;closed-house&apos; condition as much as possible during the test, meaning windows and doors should remain closed except for normal entry and exit, and household fans that draw air out of the house (like bathroom or kitchen exhaust fans) should be used sparingly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-_iEEUC9Apg</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10974-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2E30MpLogjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open the Test Kit — Radon Testing</video:title>
      <video:description>Carefully open the packaging of your EPA-approved, short-term, charcoal radon kit. You may need a pair of scissors to cut through the plastic or sealed edges. Inside the kit, you should find two radon gas detector test vials, an information card for data recording, a pre-addressed envelope for mailing the samples to the lab, and a payment form/information for the laboratory analysis.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2E30MpLogjg</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10974-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RKIYR1sFfUQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Obtain a Radon Test Kit — Radon Testing</video:title>
      <video:description>To address potential radon exposure, the project requires acquiring a radon test kit. The video displays an &quot;RAdata Radon Test Kit&quot; as an accessible option. These kits are generally affordable and can be obtained from state health departments, local hardware stores, or online vendors. It&apos;s crucial to select a kit that is certified by recognized organizations, such as the National Radon Proficiency Program (NRPP) or the National Radon Safety Board (NRSB), to ensure the reliability and accuracy of your test results. The video mentions that testing is &quot;very easy to test&quot; and &quot;inexpensive.&quot;</video:description>
      <video:player_loc>https://www.youtube.com/embed/RKIYR1sFfUQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10974-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jObxT3We5jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Obtain a Short-Term Radon Test Kit — Radon Testing</video:title>
      <video:description>Acquire a short-term radon test kit. The video specifically showcases an &quot;AprilAire Short-Term Radon Test&quot; kit, which can be purchased from AprilAire.com for approximately $25. It is crucial to ensure the kit&apos;s plastic seal remains unbroken until you are ready to initiate the test to maintain its integrity and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jObxT3We5jg</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10975-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2E30MpLogjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Test Zone and Surface Height — Radon Testing</video:title>
      <video:description>Select an appropriate location for your radon test. This &apos;test zone&apos; should be an area where you and your family spend a significant amount of time, such as a living room, family room, or bedroom. Avoid testing in kitchens or bathrooms due to potential air disturbances and humidity. If your home has a basement, it is often recommended as a prime test location. Once you&apos;ve identified a spot, find a surface that is approximately 20 inches off the floor. Use your measuring tape to confirm the height from the floor to ensure proper placement of the test vials.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2E30MpLogjg</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10975-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZJ5VBc0xNcw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Proper Device Placement — Radon Testing</video:title>
      <video:description>To ensure accurate radon readings, the device&apos;s placement is critical. It should be positioned in the lowest habitable area of the home, which is most often the basement. Furthermore, the detector needs to be placed at least 20 inches (approximately 50 cm) off the ground and a minimum of five feet (approximately 1.5 meters) away from any doors, windows, or air vents. Good placement examples include a chair in the middle of a room, a workbench, or a sturdy shelf. It is essential to ensure there are no obstructions, such as boxes, around the sides of the detector that could impede proper airflow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZJ5VBc0xNcw</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10975-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SGaoUKLpWu4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Basement Scenarios and Professional Placement — Radon Testing</video:title>
      <video:description>The speaker analyzes scenarios in unfinished and finished basements. An unfinished basement with a washer/dryer, lacking other &apos;livable&apos; features, might necessitate placing the test in a more habitable area upstairs. Conversely, a finished basement with a bed and entertainment setup is clearly a &apos;livable&apos; space, making it suitable for testing. The key is to assess if the area is regularly occupied or could be occupied, even if it&apos;s currently used for storage. The speaker emphasizes that professional radon monitors should be positioned at least 20 inches off the floor and away from sumps or other potential interference, avoiding unprofessional setups like placing a monitor on a 5-gallon bucket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SGaoUKLpWu4</video:player_loc>
      <video:duration>177</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10976-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jObxT3We5jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Deploy the Test Kit — Radon Testing</video:title>
      <video:description>Carefully open the plastic seal of the test kit. Fill out all the required information on the back of the test envelope or card, including the start date, time, and the specific location within your home where the test is being conducted. Insert the provided cardboard opener into the envelope (if your kit design requires it) to ensure proper airflow for radon sampling. Hang the test kit in the lowest lived-in level of your home, away from drafts, direct sunlight, and high heat sources. The kit should be exposed to the air for a minimum of 3 days but no more than 7 days, as explicitly shown in the video&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jObxT3We5jg</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10976-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2E30MpLogjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place Test Vials and Remove Caps — Radon Testing</video:title>
      <video:description>On your chosen surface, place both radon gas detector test vials about 6 inches apart. Carefully remove the caps from each of the test vials. This exposes the charcoal inside, allowing it to begin absorbing radon gas from the air. Ensure the vials remain upright and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2E30MpLogjg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10976-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Mfa0kF3d7SQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place the Radon Sampler — Radon Testing</video:title>
      <video:description>Locate the lowest living area of your home, typically the basement or the first floor if there&apos;s no basement. Open the sealed plastic bag that contains the &apos;Radon Sampler.&apos; Carefully remove the paper pouch from the bag. Place the radon sampler on a flat surface in the chosen test area, ensuring that the side labeled &apos;THIS SIDE MUST FACE UPWARD DURING TESTING&apos; is facing up. Leave the sampler undisturbed for 2 to 4 days, as directed by the kit&apos;s instructions. The presenter suggests leaving it for 4 days to maximize sample collection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Mfa0kF3d7SQ</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10981-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Mfa0kF3d7SQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Paperwork &amp; Mail for Lab Analysis — Radon Testing</video:title>
      <video:description>After the 2-4 day testing period, retrieve the radon sampler. Immediately fill out the &apos;Radon Test Information Sheet,&apos; ensuring all personal details, the exact test start and stop times, and the kit serial number are accurately recorded. Place the exposed radon sampler and the completed information sheet into the provided &apos;Alpha Energy Laboratories Return Mailer&apos; envelope. Tightly seal the envelope, using tape if necessary, and attach the appropriate postage. Mail the kit to Alpha Energy Laboratories for analysis. Results are typically processed and sent back within 5-7 business days. The video advises against using First Class Mail due to potential delays and recommends faster shipping options like FedEx, UPS, or USPS Express/Priority with tracking, especially since delayed return can invalidate results.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Mfa0kF3d7SQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10981-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qYg55xdnhwo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Package and Mail Sampler — Radon Testing</video:title>
      <video:description>Once the designated testing period (between 48 and 96 hours) has elapsed, retrieve the radon sampler. Place the exposed sampler into the pre-addressed return mailer that came with the kit. Ensure the Test Kit Serial ID is clearly written on the mailer. According to the instructions, the laboratory (Alpha Energy Labs) must receive the sampler within 10 days of the test&apos;s completion to ensure accurate analysis. If you used the online registration method, remember not to include the paper information form inside the mailer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qYg55xdnhwo</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10982-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lJWGrCSOlLA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ship Test Kits via Different Carriers — Radon Testing</video:title>
      <video:description>Proceed to ship the prepared test kits. Drop the two kits packaged for standard mail into a USPS mailbox. Take the two kits designated for expedited shipping to a UPS service center or drop-off point and send them using a 2-day shipping option. Note the date and time of shipping for both methods. This step initiates the transit period, which will later be correlated with the accuracy of the lab results. The goal is to observe how different transit durations affect the final radon readings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lJWGrCSOlLA</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10982-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jObxT3We5jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal and Mail the Test Kit — Radon Testing</video:title>
      <video:description>Once the designated testing period (ranging from 3 to 7 days) has concluded, retrieve the test kit from its placement. Follow the instructions provided with your specific kit to properly seal it. This usually involves peeling off an adhesive backing strip and firmly pressing the envelope or card together to form an air-tight seal, as demonstrated in the video. It is essential to mail the sealed test kit to the designated laboratory address promptly for analysis to ensure the most accurate results. The video shows the test being placed into a mailbox for shipment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jObxT3We5jg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10982-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2E30MpLogjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cap Vials and Prepare for Mailing — Radon Testing</video:title>
      <video:description>Once the designated testing period has elapsed (between 48 and 96 hours), retrieve the test vials. Immediately put the caps back onto both test vials securely. Then, meticulously fill out the provided data card with all necessary information, including your contact details, test location, and the start/end times of the test. Complete any payment forms or enclose payment if required by the lab. Finally, place both capped test vials, the filled-out data card, and any payment information into the pre-addressed envelope.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2E30MpLogjg</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10983-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2E30MpLogjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Read Your Results — Radon Testing</video:title>
      <video:description>After a few weeks, your test results will typically be mailed to you, or in some cases, you can access them online through the testing company&apos;s website. Understand that radon levels are measured in picoCuries per liter (pCi/L). The average indoor radon level is about 1.3 pCi/L, and some experts consider 0.4 pCi/L to be ideal. If your test results indicate a level of 4 pCi/L or higher, it is recommended to get another test kit and redo the test to confirm the elevated levels. This second test will help ensure the accuracy of your initial findings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2E30MpLogjg</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10983-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jObxT3We5jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Receive and Interpret Results — Radon Testing</video:title>
      <video:description>Within a few days of the laboratory receiving your test kit, you will typically be notified of your results via email. The results report, such as the one from AprilAire shown in the video, will state your home&apos;s radon level, usually measured in picocuries per liter (pCi/L). According to the US Environmental Protection Agency (EPA), any radon level under 4.0 pCi/L is considered safe. If your test results indicate a radon level of 4.0 pCi/L or higher, it is recommended to take further action, such as contacting a qualified radon mitigation professional to discuss reduction strategies for your home.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jObxT3We5jg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10983-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qYg55xdnhwo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Review and Interpret Radon Report — Radon Testing</video:title>
      <video:description>After submitting the sampler and updated information, you will typically receive your radon test results via email within about a week. The results will often come as a PDF attachment. Open the &apos;Radon Test Report&apos; to view your home&apos;s radon level. The video shows a result of 2.1 pCi/L. Based on EPA guidelines, if radon levels are 4 picoCuries per liter (pCi/L) or above, fixing your home is recommended. If levels are between 2 and 4 pCi/L, considering mitigation or retesting is advisable. In the video&apos;s example of 2.1 pCi/L, the presenter decides to retest at a different location in his basement, as per the suggested action for levels between 2 and 4 pCi/L.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qYg55xdnhwo</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10964-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7SxDTxFLdFE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Window Trim (Brick Mold) — Window Replacement</video:title>
      <video:description>After cutting the caulk, use a pry bar to carefully remove the exterior brick mold or trim around the window frame. Insert the pry bar between the trim and the brick/siding and gently leverage it away. Work slowly to avoid damaging the exterior finish. Once the trim is loose, pull it away completely. Repeat this process around the entire perimeter of the window.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7SxDTxFLdFE</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10964-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1qAdrxsL0k8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the old window — Window Replacement</video:title>
      <video:description>Before installing a new window, you must first remove the old one. Start by carefully scoring around the old window casing and any interior wall trim with a utility knife to prevent damage to the surrounding finishes. Use an oscillating saw to separate the casing and reveal the board inside. Remove any existing molding and siding around the window using a pry bar. Unscrew any screws holding the old window frame in place with a drill and appropriate drill bits. Carefully remove the old window from the opening. If the old window glass is broken or jagged, exercise extreme caution to avoid injury. After removal, thoroughly clean the window opening of any debris, old caulk, or insulation to prepare for the new installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1qAdrxsL0k8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10964-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8AVLgBRcQDI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Window and Trim — Window Replacement</video:title>
      <video:description>Begin by removing the existing exterior window trim. Use a pry bar to carefully loosen and remove the old trim pieces. Next, use a drill to remove any screws securing the old window frame. Utilize a reciprocating saw to cut through any remaining nails or fasteners that hold the old window in place. Once all fasteners are loose, carefully remove the old window frame from the opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8AVLgBRcQDI</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10965-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8vpLg_NKY0U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Window Sashes and Tracks — Window Replacement</video:title>
      <video:description>Once the sash stops and parting strips are removed, you can lift out the old window sashes. Start by tilting and removing the upper sash, then the lower sash. After the sashes are out, remove the remaining window track components, including any old weights or spring balances. The goal is to clear the entire window opening down to the rough framing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8vpLg_NKY0U</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10965-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d7G749dDBeE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Bottom Sash — Window Replacement</video:title>
      <video:description>With the bottom sash tilted, apply upward force to one side of the sash. This action disengages a small tab from its track, which is connected to a spring mechanism designed to help move the window up and down. Once one side is disengaged, the sash can be manipulated to completely remove it from the window frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d7G749dDBeE</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10965-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BbEMx_2huWc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Window Sashes — Window Replacement</video:title>
      <video:description>To begin the removal process, take out the movable sashes from the old window. For double-hung windows, typically there are small mechanisms or clips on the sides of the sashes that allow them to tilt inwards. Tilt the sashes and then twist them slightly to release them from their hinge pins or tracks, allowing them to be lifted out of the frame. This step facilitates easier access to the remaining frame and reduces the weight of the old window.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BbEMx_2huWc</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10966-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BbEMx_2huWc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demolish the Old Window Frame — Window Replacement</video:title>
      <video:description>Use a reciprocating saw (Sawzall) to cut the old window frame. The presenter recommends cutting the frame right in half, down the middle of one of the vertical jambs. This allows the frame to be &apos;peeled open like an onion&apos; for easier removal. After cutting, use an impact driver or drill to remove any remaining screws holding the frame in place. A hammer and pry bar can be used to loosen and remove any stubborn parts of the frame, including any jamb extensions. Finally, clean out any old insulation, debris, or dried expansion foam from the rough opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BbEMx_2huWc</video:player_loc>
      <video:duration>271</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10966-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7SxDTxFLdFE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Window Unit — Window Replacement</video:title>
      <video:description>With the caulk cut and the exterior trim removed, the old window frame should now be accessible. The video indicates that old windows may have interior screws or even lumber frames installed around them that are nailed into the main house framing. Use the reciprocating saw again to cut any remaining nails or screws that secure the old window frame directly to the rough opening. Once all fasteners are cut, carefully remove the entire old window unit from the opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7SxDTxFLdFE</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10966-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KIvSDaR9EVg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demolish and Remove Window Frame — Window Replacement</video:title>
      <video:description>With the sashes and visible screws removed, use a reciprocating saw to cut through the remaining window frame sections. Wear a respirator and safety glasses to protect from dust and debris. Employ a hammer and pry bar to carefully pry the frame pieces out of the rough opening. If the underlying lumber is old or damaged (e.g., 100-year-old 2x4s), completely remove it to expose the original rough opening for a clean start.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KIvSDaR9EVg</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10967-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYdJa8L-Vc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Rough Opening — Window Replacement</video:title>
      <video:description>Before installing the new window, confirm that the rough opening is square. Use a level to check the sill; if it&apos;s not level, insert wedges (shims) as necessary until the rough opening is perfectly level. This preparation ensures the new window will fit correctly and operate smoothly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYdJa8L-Vc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10967-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z1zR_k4GGBs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Window Opening — Window Replacement</video:title>
      <video:description>With the old sashes and frame removed, inspect the remaining window opening for any damaged or rotten wood. Replace any compromised sections to ensure a solid foundation for the new window. Fill any existing holes to create a smooth, continuous surface where the new window will be screwed into the frame. Clean the entire opening thoroughly, removing all dust, debris, and loose paint chips, possibly using a vacuum cleaner. Next, apply flashing tape to the sill. Ensure the tape fits the full length of the sill and extends up the vertical leg of the stool, working the tape into the corners for maximum protection. Use a level to check the sill for levelness and any bowing. If necessary, place sill shims to correct any bowing and ensure proper leveling. Attach these shims with flashing tape to prevent any future movement once they are level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z1zR_k4GGBs</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10967-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/72hzdFAuEag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Rough Opening — Window Replacement</video:title>
      <video:description>Before installing the window, prepare the rough opening. First, ensure the bottom sill of the rough opening is level. Then, install a cedar clapboard under the future window sill, tapering it from the inside to the outside to create a slight pitch. This pitch allows any water that may get into the opening to drain outwards. Next, place small shims along the bottom of the rough opening to provide support for the window and maintain an air space between the window and the sill. This also allows for air circulation and helps with drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/72hzdFAuEag</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10968-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8AVLgBRcQDI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Exterior Flashing Tape — Window Replacement</video:title>
      <video:description>Apply flashing tape, specifically ZIP System Flashing Tape, to the exterior window opening. Start by applying a strip across the bottom sill, extending it beyond the frame on both sides. Next, apply vertical strips up each side of the opening, overlapping the sill tape. Finally, apply a strip across the top of the opening, overlapping the side strips. Ensure all tape is firmly pressed down to create a watertight seal, especially at the corners.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8AVLgBRcQDI</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10968-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C7m5iGzLBDo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Side Flashing Tape — Window Replacement</video:title>
      <video:description>Next, apply standard flashing tape, such as &apos;ZIP System Flashing Tape&apos;, to the vertical side jambs of the window opening. Begin by peeling back a portion of the release liner and aligning the tape vertically along the edge of the rough opening, overlapping the previously installed sill tape. Press the tape firmly onto the sheathing and into the frame, ensuring it is smooth and wrinkle-free. Repeat this process for both vertical jambs. The tape should extend slightly beyond the top and bottom of the rough opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C7m5iGzLBDo</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10968-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WN9RC7hkedo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Sill and Side Flashing Tape — Window Replacement</video:title>
      <video:description>First, cut a section of &apos;Moistop PF Flashing&apos; tape to cover the bottom sill of the rough opening, extending it up the side jambs slightly. Secure it in place. Next, cut vertical strips of flashing tape for the side jambs. These strips should overlap the sill tape at the bottom and extend up past the top of the rough opening. Affix these side pieces securely. This overlapping technique directs water outwards and prevents moisture intrusion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WN9RC7hkedo</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10969-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8AVLgBRcQDI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Window — Window Replacement</video:title>
      <video:description>Carefully lift the new window into the prepared opening, ensuring it seats properly on the leveled shims and into the sealant. From the exterior, check the window with a level to ensure it is plumb and level in all directions. Once satisfied with its position, use a drill/driver to secure the window frame to the wall studs through the pre-drilled holes in the window&apos;s nailing fins. Drive screws at the top, bottom, and sides of the frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8AVLgBRcQDI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10969-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mPviy1JUuOc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Windows — Window Replacement</video:title>
      <video:description>Carefully lift the new window unit into the prepared rough opening. Ensure the window is centered and flush with the exterior sheathing. Use shims to achieve a perfectly level and plumb installation. Secure the window to the rough opening&apos;s framing using approved mounting screws through the pre-drilled holes in the window frame or flange. Periodically check the window with a level and speed square as you secure it to ensure it remains perfectly aligned. Repeat this process for all windows being installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mPviy1JUuOc</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10969-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8vpLg_NKY0U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Secure New Window Frame — Window Replacement</video:title>
      <video:description>Carefully place the new window frame into the prepared opening. Start by inserting the bottom of the frame first, resting it on the sill, then tip the frame upright and push it firmly against the exterior stops. Check the frame for squareness and ensure even gaps around all sides. Insert shims (small wooden wedges) into the gaps between the window frame and the rough opening at the top, bottom, and middle on both sides. This ensures the frame is level and plumb. Once the frame is correctly positioned and leveled, use a drill to drive screws through pre-drilled holes in the frame, through the shims, and into the window jamb. Finally, use a utility knife to score the shims and then break off any excess shim material flush with the frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8vpLg_NKY0U</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10970-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8AVLgBRcQDI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Window — Window Replacement</video:title>
      <video:description>Carefully lift the new window into the prepared opening, ensuring it seats properly on the leveled shims and into the sealant. From the exterior, check the window with a level to ensure it is plumb and level in all directions. Once satisfied with its position, use a drill/driver to secure the window frame to the wall studs through the pre-drilled holes in the window&apos;s nailing fins. Drive screws at the top, bottom, and sides of the frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8AVLgBRcQDI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10970-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TB3p9jI410s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level, Shim, and Secure Window — Window Replacement</video:title>
      <video:description>Once the new window is in place, use plastic packers (shims) to adjust its position until it is perfectly level, plumb (vertical), and square within the rough opening. Check alignment with existing interior finishes, such as kitchen tiles, to ensure a seamless integration. Once the alignment is satisfactory, secure the window frame to the wall studs using screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TB3p9jI410s</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10970-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kuN7h6-i9hY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level and Secure Window — Window Replacement</video:title>
      <video:description>Carefully lift and place the prepared window into the rough opening, resting its bottom frame on the previously placed shims. Once the window is roughly in place, use a long spirit level to check that the bottom sill of the window is perfectly level. Adjust the shims as necessary to achieve a level surface. After confirming the bottom is level, use an impact driver or power drill to fasten the bottom nailing flange to the framing with screws. Next, use the spirit level to check that the vertical sides of the window frame are plumb (perfectly vertical). Make any necessary adjustments using shims or by gently shifting the window. Once the sides are plumb, secure them by fastening the side nailing flanges to the framing with screws. It is recommended to use screws for fastening the window as they provide a more precise and secure installation compared to nails, and reduce the risk of damaging the window frame with a hammer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kuN7h6-i9hY</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10971-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k0prTdwArlY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Exterior Sealant — Window Replacement</video:title>
      <video:description>Using a caulk gun, apply a heavy and continuous bead of high-quality sealant around the exterior perimeter of the window opening, directly on the existing frame. This sealant creates a primary weather barrier for the new window.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k0prTdwArlY</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10971-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k0prTdwArlY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tool Exterior Sealant — Window Replacement</video:title>
      <video:description>Once the new window is securely in place, apply a final bead of sealant along the exterior perimeter where the new window frame meets the house siding. Immediately after application, carefully tool the sealant bead using a finger or a specialized tooling tool to create a neat, smooth, and professional appearance. This further enhances the weather seal and improves aesthetics.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k0prTdwArlY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10971-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1qAdrxsL0k8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply silicone caulk — Window Replacement</video:title>
      <video:description>Apply a final bead of paintable silicone caulk around the edge of the installed window, where it meets the wall or trim. This step creates a clean, finished look and provides an additional seal against moisture and drafts. Make sure to fill any small gaps or nail holes as you go, creating a smooth and continuous line of caulk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1qAdrxsL0k8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10972-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k0prTdwArlY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Interior Flat Vinyl Trim — Window Replacement</video:title>
      <video:description>Carefully measure, cut, and place flat vinyl trim around the interior of the new window, ensuring it completely encases the old window frame. This trim covers the gap and the foam backer rod, providing a clean and finished look to the interior window opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k0prTdwArlY</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10972-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mQ74FVB9JSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Interior Window Trim Gaps — Window Replacement</video:title>
      <video:description>Move to the interior of the window. Check if the window trim board is tightly secured against the drywall. If there are any visible gaps, apply a clear, paintable caulk. This not only seals air leaks but also ensures a clean finish if you plan to paint the trim, as the caulk will be barely visible or can be painted over.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mQ74FVB9JSI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10972-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sy63k24_ubU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Casings and Caulk — Window Replacement</video:title>
      <video:description>Transport the finished white oak casings upstairs to the loft. Carefully fit each casing into its respective window opening, ensuring it sits flush with the newly mudded drywall. Secure the casings in place using a hammer and finishing nails or a nail gun. Finally, apply caulk (such as DAP brand Flex Dry) along the seam where the casing meets the drywall to fill any small gaps and create a perfectly seamless, trimless look. This completes the modern window casing installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sy63k24_ubU</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10973-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/72hzdFAuEag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Window Functionality — Window Replacement</video:title>
      <video:description>With the window fully installed and sealed, test its operation. Gently raise and lower both the bottom and top sashes. Ensure they move smoothly without sticking or binding, indicating a properly aligned and squared installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/72hzdFAuEag</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10973-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nN0A1OU13V4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Adjust Window Operation — Window Replacement</video:title>
      <video:description>After installation, test the window to confirm it opens and closes smoothly. If the sash is rubbing against the window stop or is too far from it and not sealing properly, you can make adjustments. Place the SWISCO 75-034 hinge wrench under the hinge pin at the base and turn it a 1/4 turn at a time. This will adjust the sash alignment. Continue making small adjustments until your sash is properly aligned and the window operates without issue and seals correctly. Once adjusted, check the window&apos;s operation one final time to confirm it can close and lock without any problems.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nN0A1OU13V4</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10973-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kuN7h6-i9hY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Functionality Check — Window Replacement</video:title>
      <video:description>After all exterior sealing and flashing are complete, test the functionality of the newly installed window. Open and close the window several times to ensure it operates smoothly without sticking or binding. Check that it latches securely and that there are no visible issues with the frame or glass. This final check confirms that the installation was successful and the window is ready for interior finishing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kuN7h6-i9hY</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10960-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xbc7X1O_hQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare Garage Door Surface — Garage Door Insulation</video:title>
      <video:description>Before installing any insulation, ensure the interior surface of your garage door is clean and dry. Use a damp cloth to wipe away any dust, dirt, grease, or grime. Allow the surface to dry completely. A clean surface is essential for proper adhesion if your insulation kit utilizes adhesive pads or double-sided tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xbc7X1O_hQY</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10960-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tK2_756lVfA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Surfaces — Garage Door Insulation</video:title>
      <video:description>The first step is to ensure that all surfaces of the garage door panels where the insulation will be applied are thoroughly clean. Use isopropyl alcohol and a clean rag to wipe down these surfaces, removing any dirt, grease, or grime that could hinder the adhesive&apos;s bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tK2_756lVfA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10960-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yi3I2xQBmp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Surfaces by Cleaning — Garage Door Insulation</video:title>
      <video:description>Before applying any adhesive, thoroughly clean all surfaces of the garage door where the double-sided tape will be placed. The creator uses Windex and a microfiber rag to remove dirt, dust, and any other contaminants. This step is crucial to ensure optimal adhesion of the tape and prevent the insulation from falling off prematurely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yi3I2xQBmp0</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10961-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PTJNKody2Tw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure, Cut, and Install Main Insulation Panels — Garage Door Insulation</video:title>
      <video:description>Measure the width of the main section of the garage door panel, typically around 47.75 inches, and mark this dimension on a polystyrene foam insulation panel using a Sharpie. Use a sharp razor knife to cut the panel to the precise measurement. The panels often have pre-scored ridges on the back to aid in bending. Carefully install the cut panel into the main section of the garage door by gently bending it along these ridges and snapping it into place. Repeat this measuring, cutting, and installation process for all remaining main panels of the garage door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PTJNKody2Tw</video:player_loc>
      <video:duration>118</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10961-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LJfQofn-rbU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Insulation Panels — Garage Door Insulation</video:title>
      <video:description>After preparing the door frames, measure the internal dimensions of each individual garage door panel. Use the tape measure to get both the width and height of the main panel areas. With these measurements, use the straight edge and box cutter to precisely cut the rigid foam insulation panels to size. The insulation material is designed to have a slight flexibility, allowing for a snug fit. For the narrow side frame columns, measure their dimensions and cut thin strips of insulation foam to fit inside them. This helps create a complete thermal barrier and a clean look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LJfQofn-rbU</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10961-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_uEyP_3lxz0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Insulation — Garage Door Insulation</video:title>
      <video:description>Using a tape measure, carefully measure the dimensions (height and width) of each individual panel or the support frames of your garage door. Accuracy is crucial for a snug fit. Once measured, unroll the Reflectix insulation and, using the straight edge as a guide and the utility knife, cut the insulation to precisely match the measured dimensions of each panel or frame section. Repeat this process for all sections that will be insulated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_uEyP_3lxz0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10962-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yi3I2xQBmp0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Insulation Panels — Garage Door Insulation</video:title>
      <video:description>Begin by measuring the width and height of the first garage door panel section. Unroll the reflective foam insulation and use a box cutter to cut a panel to the measured dimensions. Carefully peel off the backing from the double-sided tape on the garage door and align the cut insulation panel. Press the insulation panel firmly onto the exposed tape, ensuring it adheres smoothly and completely to the door surface. This process is repeated for each section of the garage door until all panels are covered. A ladder may be necessary for higher sections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yi3I2xQBmp0</video:player_loc>
      <video:duration>112</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10962-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TSgXAXIVhss/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adhere Insulation Panels — Garage Door Insulation</video:title>
      <video:description>Starting from the top panel of the garage door, peel back about two feet of the double-sided tape backing at a time. Carefully align the pre-cut insulation panel with the top edge of the garage door section. Press the insulation firmly onto the exposed tape, working your way across the panel. Repeat this process, peeling back more tape backing and pressing the insulation until the entire panel section is covered. The presenter emphasizes working in smaller sections to prevent the tape from sticking prematurely or getting tangled.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TSgXAXIVhss</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10962-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xbc7X1O_hQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Insulation Panels — Garage Door Insulation</video:title>
      <video:description>Carefully take each cut insulation panel and align it with the corresponding garage door section. For kits that fit into rails, carefully slide the panels into place between the horizontal and vertical rails. For kits using adhesive, press the insulation panel firmly onto the applied adhesive pads or tape. Ensure each panel is centered and flush against the door surface. Once in place, the insulation should provide an effective barrier against temperature fluctuations and reduce sound transfer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xbc7X1O_hQY</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10963-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kzvAxgg-GGE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Insulation Seams with Foil Tape — Garage Door Insulation</video:title>
      <video:description>Once all the Reflectix insulation panels are stapled to the wall, apply Nashua foil tape along all the vertical seams where the insulation strips meet. This step is critical to create a continuous vapor barrier and prevent any air leakage, maximizing the insulation&apos;s effectiveness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kzvAxgg-GGE</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10963-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o93IFuUkPhs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Main Panel Seams — Garage Door Insulation</video:title>
      <video:description>Once all the insulation panels (both bubble foil and rigid foam) are in place, use Reflectix foil tape to seal the seams where the insulation meets the garage door frame or where panels butt against each other. Apply the tape firmly, pressing down to ensure good adhesion and create an effective vapor barrier and thermal seal. This prevents air leakage and further improves the insulation&apos;s performance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o93IFuUkPhs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10963-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ghtOAmSDFRQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tape Gaps (Optional) — Garage Door Insulation</video:title>
      <video:description>As an optional step to further enhance insulation and prevent air leakage, tape any gaps that may exist between the installed Foil Board panels or where the panels meet the garage door&apos;s framework. Use Foil Board joint tape for this purpose, applying it smoothly and firmly over the seams to create a continuous thermal barrier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ghtOAmSDFRQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10952-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a-uH19eqd8g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate HVAC Filter — AC Filter Replacement</video:title>
      <video:description>Next, you need to identify the location of your home&apos;s HVAC air filter. The placement can vary significantly between different homes and HVAC system configurations. The video demonstrates two common locations: it might be found behind a return air grill in the ceiling of a central living area or hallway, or it could be directly with the main HVAC unit itself, often housed in an attic or a hall closet. The person in the video first points to a large ceiling vent as a potential filter location, then proceeds to a hall closet where the main HVAC unit and its filter are located near the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a-uH19eqd8g</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10952-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eJM0ctipors/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Furnace Filter — AC Filter Replacement</video:title>
      <video:description>Next, locate the furnace filter within your heating system. The filter is typically found in the cold air return duct or positioned directly next to the blower compartment. It might be hidden behind an access door, a large return air vent, or a dedicated slot on the side of the furnace unit itself. Carefully inspect the area around your furnace and air ducts to find its exact position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eJM0ctipors</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10952-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sOcfx5o9-B4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Filter and Identify Airflow — AC Filter Replacement</video:title>
      <video:description>Once the power is off, locate the air filter within your HVAC system. It is typically found in the return plenum (the large metal duct) directly before the blower or main unit of the furnace. In some less common cases, the filter might be located behind an air return vent in a wall or ceiling. After locating the filter, carefully pull it out. Observe the &apos;airflow&apos; arrow printed on the filter&apos;s cardboard frame; this arrow indicates the direction air should flow through the filter. For future reference and convenience, it&apos;s highly recommended to use a permanent marker, like a Sharpie, to draw an arrow on the return plenum itself, indicating the correct airflow direction towards the furnace.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sOcfx5o9-B4</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10953-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a-uH19eqd8g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off HVAC System — AC Filter Replacement</video:title>
      <video:description>The video begins by emphasizing the importance of regularly replacing your home&apos;s air filter. The first step in this process is to ensure safety by turning off the entire HVAC system. Locate your wall thermostat, typically found in a central area of your home. Using the thermostat&apos;s interface, navigate to the &apos;Mode&apos; setting and switch it to the &apos;Off&apos; position. This action prevents the system from unexpectedly turning on while you are working near the filter, ensuring both your safety and preventing dust from being circulated when the filter is removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a-uH19eqd8g</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10953-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IKySBZ9esWQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off HVAC System — AC Filter Replacement</video:title>
      <video:description>Locate your home&apos;s thermostat. On the thermostat, switch the system setting from &apos;Cool&apos; or &apos;Heat&apos; to &apos;Off&apos;. This is a critical safety step to prevent the HVAC system from accidentally turning on while you are working on the filter, which could cause injury or damage to the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IKySBZ9esWQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10953-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sOcfx5o9-B4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off HVAC Power — AC Filter Replacement</video:title>
      <video:description>Before beginning any work on the HVAC unit, it is crucial to turn off its power to ensure safety. Most modern units have a dedicated power switch, often located on the side of the furnace unit, which can be simply flipped off. If such a switch is not present or easily accessible, the unit can also be turned off via the thermostat by setting it to &apos;Off&apos; or &apos;Automatic&apos; mode. As a last resort, or for added safety, locate the circuit breaker corresponding to the furnace in your home&apos;s electrical panel and flip it to the &apos;Off&apos; position. This prevents the unit from accidentally turning on and causing injury or damage during the filter replacement process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sOcfx5o9-B4</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10954-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qN0h5kzrXTU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Air Filter — AC Filter Replacement</video:title>
      <video:description>Carefully remove the old, dirty air filter from its slot. Observe the direction of the airflow arrow on the old filter before discarding it; this will guide you in properly installing the new filter. The video demonstrates pulling out a visibly soiled pleated filter, emphasizing how much dust and contaminants it has collected, highlighting the importance of regular changes for both air quality and HVAC system efficiency.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qN0h5kzrXTU</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10954-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1MPJu-fFKAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Air Filter — AC Filter Replacement</video:title>
      <video:description>Once the access door is removed, carefully slide the old, dirty air filter out of its slot. Note the direction of the airflow arrow on the old filter before removal, as the new filter must be installed in the same orientation. Dispose of the old filter responsibly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1MPJu-fFKAc</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10954-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a-uH19eqd8g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Filter — AC Filter Replacement</video:title>
      <video:description>Once you&apos;ve located the filter housing (in this case, in a hall closet near the floor), carefully slide out the old, dirty air filter. Before discarding it, take a moment to observe the small arrow printed on the filter&apos;s frame. This arrow indicates the direction of airflow, which is critical for proper installation. Retrieve your new HVAC filter (the video shows a standard pleated air filter). Align the new filter so that its airflow arrow points in the same direction as the old one (typically towards the furnace or air handler, or into the main HVAC unit). Gently slide the new filter into its designated slot until it is fully seated. Finally, close any access doors or covers that were opened to reach the filter housing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a-uH19eqd8g</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10955-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sOcfx5o9-B4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Replacement Filter — AC Filter Replacement</video:title>
      <video:description>When choosing a new air filter, you&apos;ll encounter various types with different filtration ratings, such as MERV (Minimum Efficiency Reporting Value) or FPR (Filter Performance Rating). Higher numbers on these ratings indicate greater filtration capability, capturing smaller particles like allergens, mold spores, and even some bacteria. However, a higher rating also means the filter is denser, which can restrict airflow. Most HVAC technicians recommend using a filter in the middle to low-end range (e.g., FPR 4-7 or MERV 7-10) for optimal balance between air quality and system efficiency. If someone in your home has severe allergies, a higher-rated filter might be beneficial, but be aware that it might require more frequent changes and could potentially strain your blower motor if your system isn&apos;t designed for it. Ensure the new filter&apos;s dimensions (e.g., 16x25x1 inches) perfectly match the old filter&apos;s size; a filter that is too small will allow unfiltered air to bypass it. Writing the filter size on the plenum is also a useful tip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sOcfx5o9-B4</video:player_loc>
      <video:duration>171</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10955-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IKySBZ9esWQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Correct Filter Size and Airflow Direction — AC Filter Replacement</video:title>
      <video:description>Examine the old filter for printed dimensions, which usually indicate the nominal size (e.g., 20&quot; x 20&quot; x 1&quot;). Also, look for the &apos;Actual Filter Size,&apos; which may be slightly smaller (e.g., 19-3/4&quot; x 19-3/4&quot; x 7/8&quot;). If the old filter is unreadable or missing, use a tape measure to determine the exact width, length, and depth of the filter slot in the housing. Next, locate the &apos;AIR FLOW&apos; arrow printed on the new filter&apos;s cardboard frame. This arrow indicates the direction the air should flow through the filter. For ceiling-mounted returns, the arrow typically points upwards, towards the ductwork. For wall-mounted returns or filters located on the HVAC unit itself, the arrow should point towards the blower motor or into the system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IKySBZ9esWQ</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10955-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_k6N3g_swog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Existing Filter Size — AC Filter Replacement</video:title>
      <video:description>Before purchasing any new air filter, it is crucial to determine the correct size required for your HVAC system. The expert demonstrates this by showing a standard filter with its dimensions clearly printed on the frame, for example, &apos;16x25x1&apos; inches (length x width x thickness). Always check this information on your existing filter to ensure the new one fits properly into the designated slot in your furnace or air handler.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_k6N3g_swog</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10956-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qN0h5kzrXTU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Air Filter — AC Filter Replacement</video:title>
      <video:description>Slide the new air filter into the designated slot, making sure it goes in smoothly and the airflow arrow continues to point in the correct direction (towards the HVAC unit). Exercise caution during this step to prevent the filter from snagging on any metal edges or tearing the filter material. A torn filter will not function effectively and will need to be replaced. Once fully inserted, the filter should fit snugly within the slot, creating a seal to prevent air from bypassing it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qN0h5kzrXTU</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10956-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GOm6pAYG_do/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Filter with Correct Airflow Direction — AC Filter Replacement</video:title>
      <video:description>Take the new air filter and carefully examine the cardboard frame for an arrow indicating &quot;AIR FLOW&quot;. This arrow is critically important and must point towards the furnace or air handler unit (the component that heats or cools the air) and away from the return air duct (where air is drawn into the system). Slide the new filter into the filter slot, ensuring the arrow is correctly oriented. If the filter is installed backward, it will not filter effectively, placing unnecessary strain on your HVAC system and reducing its efficiency.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GOm6pAYG_do</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10956-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gfYnyz5f1Dc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Air Filter — AC Filter Replacement</video:title>
      <video:description>After removing the old filter, the presenter picks up the new air filter. He re-iterates finding the airflow arrow and ensuring it points directly towards the furnace. He then slides the new filter into the filter box. If your furnace system has a door covering the filter slot, close it securely after inserting the new filter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gfYnyz5f1Dc</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10957-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IKySBZ9esWQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Close Housing and Turn On HVAC System — AC Filter Replacement</video:title>
      <video:description>After the new filter is securely in place, close the filter housing door. Make sure both pull tabs or latches snap firmly into their locked position to ensure the door is properly sealed. Finally, return to your thermostat and switch the HVAC system back to your desired &apos;Cool&apos; or &apos;Heat&apos; setting. The system should now operate with the new, clean filter, improving air quality and efficiency.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IKySBZ9esWQ</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10957-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/06raRUL5bGc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Filter Rack Door — AC Filter Replacement</video:title>
      <video:description>Once the new air filter is securely in place within the filter rack, carefully reattach the access door or cover. Engage any latches or clips to ensure the door is closed tightly and forms a proper seal. An airtight seal is important to prevent air from bypassing the filter, which would reduce its effectiveness and allow unfiltered air into your system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/06raRUL5bGc</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10957-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/soIj__onLLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Filter and Secure Grille — AC Filter Replacement</video:title>
      <video:description>Once the filter is clean, carefully slide it back into its original position within the return air grille. Ensure it is seated correctly and securely. Then, close the grille door firmly, ensuring it latches properly. With the filter reinstalled and the grille closed, your HVAC system is ready for operation with improved air quality and efficiency. If you require further assistance or suspect your appliance needs service, contact a professional.</video:description>
      <video:player_loc>https://www.youtube.com/embed/soIj__onLLc</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10958-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sOcfx5o9-B4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore HVAC Power — AC Filter Replacement</video:title>
      <video:description>With the new air filter securely in place, turn the power back on to your HVAC unit. If you used the furnace&apos;s dedicated switch, simply flip it back to the &apos;On&apos; position. If you turned off the power at the circuit breaker, flip the corresponding breaker back to &apos;On&apos;. Your HVAC system should now be ready to operate with its new, clean filter. You can leave spare filters conveniently stored near the furnace so they are always accessible for future replacements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sOcfx5o9-B4</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10958-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ED3bfesbE_Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power to the Heating System — AC Filter Replacement</video:title>
      <video:description>After successfully installing the new filter and securing the access panel, it&apos;s time to restore power to your heating system. Return to your circuit breaker panel and flip the heating system&apos;s breaker back to the &apos;on&apos; position, or switch your thermostat from &apos;off&apos; back to your desired heating/cooling mode. Your furnace should now resume normal operation with a clean, efficient air filter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ED3bfesbE_Y</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10958-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a-uH19eqd8g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Enjoy — AC Filter Replacement</video:title>
      <video:description>With the new filter securely in place and the housing closed, return to your wall thermostat. Change the mode from &apos;Off&apos; back to your desired operating setting, such as &apos;Cool&apos; or &apos;Heat&apos;, or &apos;Auto&apos; for automatic temperature management. Your HVAC system is now ready to operate with a fresh, clean filter, which will contribute to improved indoor air quality, better system efficiency, and reduced energy consumption. Now you can breathe easier!</video:description>
      <video:player_loc>https://www.youtube.com/embed/a-uH19eqd8g</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10959-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1MPJu-fFKAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Air Filter — AC Filter Replacement</video:title>
      <video:description>Once the access door is removed, carefully slide the old, dirty air filter out of its slot. Note the direction of the airflow arrow on the old filter before removal, as the new filter must be installed in the same orientation. Dispose of the old filter responsibly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1MPJu-fFKAc</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10959-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IKySBZ9esWQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Filter — AC Filter Replacement</video:title>
      <video:description>With the filter housing open, carefully slide the old HVAC filter out of its slot. Depending on how much dust and debris it has accumulated, you may want to immediately place it into a trash bag to prevent airborne particles from spreading throughout the room or falling back into the ductwork. Remove the filter slowly and smoothly to avoid dislodging any captured dirt.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IKySBZ9esWQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10959-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ytIQS82yAZg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Filter — AC Filter Replacement</video:title>
      <video:description>Once the air filter&apos;s location is identified and power is off, carefully slide the old, dirty filter out of its slot. Be mindful that the filter may be covered in dust and debris. If the filter is particularly dirty, you may want to wear gloves to avoid direct contact with the accumulated particles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ytIQS82yAZg</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10942-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TablS2U_Vqs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Concrete Floor — Garage Floor Epoxy Coating</video:title>
      <video:description>Begin by thoroughly cleaning the concrete floor. Use a floor scraper to remove any high spots or hardened debris, such as dried adhesive, joint compound, or paint spills. After scraping, use a stiff-bristled broom to sweep all larger debris and loose particles out of the area. Finally, use a shop vacuum to vacuum the entire floor surface, ensuring all dust and small particles are removed, creating a clean base for the next steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TablS2U_Vqs</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10942-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CgbDEQ7U8wM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sweep the Surface — Garage Floor Epoxy Coating</video:title>
      <video:description>Before applying any cleaning solutions, sweep the entire concrete surface thoroughly. Use a push broom to remove all loose dust, dirt, leaves, and any other debris that may be present. This step ensures that cleaning solutions can directly contact the surface and are not diluted or contaminated by loose particles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CgbDEQ7U8wM</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10942-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GmsvmUFi7jI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Clean the Concrete Floor — Garage Floor Epoxy Coating</video:title>
      <video:description>Before applying any sealant, it is crucial to prepare the concrete floor thoroughly. Begin by sweeping the entire area with a stiff-bristled broom to remove loose debris, dirt, and any larger particles. Next, use a scraper or a suitable tool to chip away any hardened cement, spills, or other snots and imperfections from the floor surface. Finally, use a shop vacuum or industrial vacuum cleaner to vacuum the entire floor to remove as much fine dust as possible. This ensures optimal adhesion of the sealer. If a double garage door is open, be mindful of dust blowing back in.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GmsvmUFi7jI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10943-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sEUEUG7Vh48/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Degrease and Scrub the Concrete Floor — Garage Floor Epoxy Coating</video:title>
      <video:description>After wetting the floor, grab a suitable concrete degreaser, such as &apos;Krud Kutter&apos;, and apply it generously to the wet concrete. Then, use a stiff-bristled scrub brush, ideally one with a long handle, to vigorously scrub the entire floor. Focus on areas with oil stains, grease, or heavy dirt buildup to ensure all contaminants are lifted and removed from the concrete&apos;s pores. The goal is to clean the surface thoroughly so the epoxy can adhere properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sEUEUG7Vh48</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10943-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GvKKqeUFJsI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Degrease the Concrete — Garage Floor Epoxy Coating</video:title>
      <video:description>After removing everything from the garage, thoroughly clean and degrease the floor. First, use a leaf blower to clear any large debris, then sweep the entire floor with a floor broom to remove remaining dust and loose particles. It is extremely important to start with a clean floor to ensure the epoxy adheres properly. Next, prepare a degreaser solution by diluting a garage cleaner/degreaser in a bucket with water, following the product&apos;s instructions. Wet the concrete floor with a pressure washer or a garden hose. Pour the diluted degreaser onto the areas needing cleaning, especially stained spots, and scrub vigorously with a stiff brush. Rinse the scrubbed area with clean water, then use a floor squeegee to push the water out of the garage. For stubborn or heavy stains, repeat the scrubbing and rinsing process until the floor is visibly clean. This prep work is crucial as epoxy will not adhere to grease, oil, or any other residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GvKKqeUFJsI</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10943-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UdolrDw4GUs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Garage and Degrease Floor — Garage Floor Epoxy Coating</video:title>
      <video:description>Before beginning any work, ensure the entire garage floor is completely clear of all vehicles, tools, and any other items. Inspect the floor for any oil or grease spots. Use Rust-Oleum EpoxyShield Heavy-Duty Degreaser directly on these spots. Scrub the areas thoroughly with a stiff bristle brush to lift the grease. Absorb any excess degreaser with rags or paper towels. After addressing the spots, rinse the entire floor twice using a hose to remove all degreaser and any remaining contaminants.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UdolrDw4GUs</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10944-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/takc-e6Q8a0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair Concrete Cracks — Garage Floor Epoxy Coating</video:title>
      <video:description>Carefully apply a crack patch material, such as Stonecoat Crack Patch, into all prepared concrete cracks. Ensure the material fully fills the cracks and then use a trowel or flat edge to smooth and level the patch with the surrounding concrete surface. Allow it to cure according to the manufacturer&apos;s instructions. Once cured, you may need to lightly grind the patched areas again to ensure they are perfectly flush with the rest of the floor, as shown in the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/takc-e6Q8a0</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10944-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QFEo0sOw7Yw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch and Repair Concrete — Garage Floor Epoxy Coating</video:title>
      <video:description>Once the floor is clean and dry, inspect it for any cracks, chips, or divots. Use the Rust-Oleum Concrete Patch &amp; Repair kit to fill and level any damaged areas. This step ensures a smooth, even surface for the epoxy application, preventing imperfections from showing through the final coat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QFEo0sOw7Yw</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10944-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jzU2HHFnZyw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair Concrete Damage — Garage Floor Epoxy Coating</video:title>
      <video:description>Inspect the stairs for any chips, cracks, or spalling. Using a suitable concrete repair compound (such as a two-part epoxy patch or a quick-setting cementitious patch), fill and level these damaged areas. Apply the patching material with a trowel or spatula, ensuring it is flush with the surrounding concrete surface. Allow the repair material to cure according to the manufacturer&apos;s instructions before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jzU2HHFnZyw</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10945-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/takc-e6Q8a0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Grind and Prepare Concrete Surface — Garage Floor Epoxy Coating</video:title>
      <video:description>Use a concrete grinder fitted with a diamond cup wheel to thoroughly grind the entire concrete floor surface. This process creates a clean, porous profile for optimal epoxy adhesion. For enhanced dust control, attach the grinder to a shop vacuum with a dust shroud. Additionally, use a chisel or a crack chaser tool to open up any existing cracks in the concrete, preparing them for repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/takc-e6Q8a0</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10945-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HFZhyOzvmUQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concrete Grinding — Garage Floor Epoxy Coating</video:title>
      <video:description>The initial and crucial step for any epoxy floor coating project is thorough surface preparation. This involves using a concrete grinder to mechanically profile the entire concrete surface. Grinding ensures the removal of any contaminants, sealers, or weak concrete, creating a porous and clean substrate that allows for optimal adhesion of subsequent epoxy layers. It also helps to smooth out minor imperfections in the concrete. A powerful dust extractor or industrial vacuum is typically connected to the grinder to collect dust and maintain a clean working environment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HFZhyOzvmUQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10945-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GvKKqeUFJsI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Etch the Concrete Surface — Garage Floor Epoxy Coating</video:title>
      <video:description>After cleaning, the concrete surface needs to be made porous to ensure proper bonding of the epoxy. This can be achieved either by grinding the surface or by acid etching. The video demonstrates the acid etching method, which is generally more DIY-friendly. The epoxy kit often includes a concrete etch powder. First, mix the concrete etch powder with the correct amount of water in a separate 5-gallon bucket, stirring until it is completely dissolved. Always wear rubber gloves and protective eyewear during this step. It is crucial NOT to use the same mixing buckets designated for the epoxy for the acid etching solution. Pre-wet the entire floor with a hose or pressure washer before applying the acid etch solution, as the concrete must remain damp throughout the entire etching process. Pour the diluted etching solution onto a small section of the floor, either directly from the bucket or more precisely with a plastic watering can. Immediately scrub the section vigorously with a stiff brush to ensure the product penetrates the concrete. Continue this process across the entire garage, paying close attention to high-traffic areas. The etch solution must remain on the surface for a minimum of 15 minutes or longer to properly work. Once etching is complete, rinse the entire garage floor thoroughly with a hose or pressure washer to remove all traces of the acid and any loosened concrete particles. Finally, use a squeegee to push out any standing water and allow the floor to dry completely for 24 to 48 hours. Ensure the floor is bone dry before proceeding to epoxy application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GvKKqeUFJsI</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10946-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fIn9OtPcLxs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Excess Water and Dry — Garage Floor Epoxy Coating</video:title>
      <video:description>After the final rinsing, use a squeegee to remove any excess moisture from the concrete surface, which will help to expedite the drying process. Once excess water is removed, the floor must be allowed to dry completely. A crucial step is to wait a full 24 hours for the floor to be entirely dry before applying any topcoat, paint, or stain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fIn9OtPcLxs</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10946-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vByKIq0xpUk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Post-Grinding Cleaning and Drying — Garage Floor Epoxy Coating</video:title>
      <video:description>After all grinding is complete, thoroughly clean the entire floor to remove residual concrete dust. Use a garden hose to wet down the floor, paying special attention to washing out the ground-down cracks. Use a broom to scrub and direct the water and remaining dust towards the drain. Once the floor is clean, set up a heater and a fan to circulate air and expedite the drying process. Allow the floor to dry completely overnight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vByKIq0xpUk</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10946-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UdolrDw4GUs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Floor to Dry and Test for Cleanliness — Garage Floor Epoxy Coating</video:title>
      <video:description>After etching and rinsing, allow the entire concrete surface to dry completely. This typically requires allowing it to dry overnight. To test for dryness and cleanliness, wipe your fingers over the clean, dry floor. If you observe any dust or powder on your fingers, it indicates that the floor is not thoroughly cleaned or dry enough. In this case, repeat the rinsing and scrubbing steps until no dust or powder is visible on your fingers after wiping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UdolrDw4GUs</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10947-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l9qQW40qTmE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix the Epoxy Coating — Garage Floor Epoxy Coating</video:title>
      <video:description>Epoxy coatings are typically a two-part system: a resin (Part A) and a hardener (Part B). It is critical to precisely measure and mix these components according to the manufacturer&apos;s specified ratios. Pour the Part A resin into a large mixing bucket, then add the Part B hardener. Use a drill equipped with a mixing paddle to thoroughly blend the two components for 2-3 minutes. Scrape the sides and bottom of the bucket during mixing to ensure all material is fully incorporated. Mix slowly to avoid introducing air bubbles, which can cause imperfections in the final coating. Once mixed, the epoxy has a limited &apos;pot life&apos; (working time), so prepare to apply immediately.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l9qQW40qTmE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10947-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Dl-Kxvu7ow/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix Epoxy Base Coat — Garage Floor Epoxy Coating</video:title>
      <video:description>The epoxy base coat consists of at least two components (Part A and Part B) that must be mixed thoroughly in specific ratios to initiate the curing process. In a clean bucket, first add Part A, then carefully pour in Part B, ensuring all material is added according to manufacturer specifications. Using a heavy-duty drill equipped with a spiral mixing paddle, mix the components for several minutes (typically 2-3 minutes), scraping the sides and bottom of the bucket to ensure uniform blending. Proper mixing is critical for the epoxy to cure correctly and achieve its intended properties.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Dl-Kxvu7ow</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10947-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZmTKLCnv9Xw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix Epoxy Resin Components — Garage Floor Epoxy Coating</video:title>
      <video:description>Begin by mixing the two liquid components (A and B) of the epoxy resin in a clean bucket. Use a drill fitted with a mixing paddle to ensure the two parts are thoroughly combined. Adequate mixing is crucial for the epoxy to cure properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZmTKLCnv9Xw</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10948-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-kJPJJO7KSE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Epoxy Base Coat — Garage Floor Epoxy Coating</video:title>
      <video:description>Wearing spiked shoes, begin applying the mixed epoxy base coat. Use a paintbrush to &apos;cut in&apos; the perimeter of the floor, carefully applying epoxy along the taped edges. Once the edges are done, pour the epoxy onto the floor in long, continuous ribbons. Use a squeegee to spread the epoxy evenly across the surface. Immediately after spreading, use a roller with an extension pole to back-roll the epoxy, ensuring a uniform thickness and smooth finish. Work quickly within the epoxy&apos;s working time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-kJPJJO7KSE</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10948-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/p5fir7QA9YU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Epoxy Base Coat — Garage Floor Epoxy Coating</video:title>
      <video:description>Once the floor is thoroughly prepped and dry, begin applying the epoxy base coat. Use a two-part epoxy kit (like Benjamin Moore Corotech). Carefully mix the two parts according to the manufacturer&apos;s instructions. Pour the mixed epoxy directly onto the clean, dry concrete floor in small sections. Use a long-handled paint roller or squeegee to spread the epoxy evenly across the surface. Work efficiently as epoxy has a limited pot life once mixed. Repeat this process for the entire floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/p5fir7QA9YU</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10948-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Lpo2dmjC75s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply 1st Epoxy Coat &amp; Dry Overnight — Garage Floor Epoxy Coating</video:title>
      <video:description>Once the epoxy solution is mixed, immediately begin applying the first coat. Use a paintbrush to carefully cut in around the edges of the floor, along the masked areas, and any tight corners. Then, use a roller with an extension pole to evenly apply the epoxy across the main floor surface. Work in small sections to maintain a wet edge and ensure consistent coverage. After the first coat is applied, allow it to dry completely overnight, as recommended by the presenter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Lpo2dmjC75s</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10949-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i4XeVwAAbNA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sprinkle Decorative Flakes — Garage Floor Epoxy Coating</video:title>
      <video:description>While the epoxy is still wet, take the decorative flakes and sprinkle them over the newly applied patch. It&apos;s recommended to use only two fingers to pick up and sprinkle the flakes, allowing for greater control over the distribution. Apply flakes in small quantities initially; you can always add more if needed. Avoid over-applying, as excess flakes are difficult to remove once they adhere to the epoxy. The goal is to match the density and pattern of the surrounding floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i4XeVwAAbNA</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10949-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Dm_9vzXipWw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Decorative Flakes — Garage Floor Epoxy Coating</video:title>
      <video:description>Once the epoxy is evenly spread and rolled, it&apos;s time to apply the decorative flakes. Take a small amount of flakes in your hand from the bag. Throw the flakes straight up into the air, allowing them to fall naturally onto the wet epoxy. This method ensures an even and random distribution. Work in small sections, moving across the floor. When flaking near doors or walls, avoid throwing flakes directly at the surface, as they will drop straight down and create an unnatural straight line. Instead, open the door, throw flakes into the opening, or move away from the wall and toss them upwards, allowing them to drift over the edge. Ensure a consistent quantity of flakes is applied throughout to avoid blotchy areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Dm_9vzXipWw</video:player_loc>
      <video:duration>105</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10949-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CgbDEQ7U8wM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Decorative Flakes Application — Garage Floor Epoxy Coating</video:title>
      <video:description>While the second coat of epoxy paint is still wet, apply the decorative flakes. Take handfuls of decorative flakes and toss them lightly upwards into the air, allowing them to fall randomly onto the wet paint. This method creates a natural, uniform distribution. Continue tossing flakes evenly over the entire wet section you just painted. The flakes will adhere to the wet epoxy, creating a unique speckled, decorative look. Do not walk on the flakes or try to place them precisely; allow them to fall organically.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CgbDEQ7U8wM</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10950-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l9qQW40qTmE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow to Cure — Garage Floor Epoxy Coating</video:title>
      <video:description>After the epoxy has been applied, it must be allowed to cure undisturbed. The curing process is crucial for the epoxy to reach its full hardness, durability, and chemical resistance. Refer to the manufacturer&apos;s instructions for specific cure times, which typically include a &apos;walk-on&apos; time (light foot traffic), a &apos;recoat&apos; window (if applying multiple coats), and a &apos;heavy traffic/chemical resistance&apos; time. Generally, light foot traffic is allowed after 24-72 hours, while heavy vehicle traffic and full chemical resistance may take 5-7 days or even longer. Maintain consistent temperature and good ventilation in the area during curing, as extreme temperatures or high humidity can affect the curing process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l9qQW40qTmE</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10950-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DRzQsSTe-p8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Epoxy to Dry and Cure — Garage Floor Epoxy Coating</video:title>
      <video:description>After applying the clear top coat, allow the epoxy coating to dry for a minimum of 18 hours before walking on the surface. For full curing and maximum durability, you must allow 72 hours before parking vehicles on the coated floor. Adhering to these drying times is crucial to ensure the longevity and performance of your new garage floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DRzQsSTe-p8</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10950-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UdolrDw4GUs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Epoxy to Cure — Garage Floor Epoxy Coating</video:title>
      <video:description>After the epoxy coating and decorative chips have been applied, allow sufficient time for the floor to cure before resuming normal use. The surface should be ready for light foot traffic in approximately 12 to 16 hours. For heavy item placement, such as storage shelves or tools, wait 24 to 48 hours. Most importantly, allow the floor to cure for a full three days before parking vehicles on the surface. This ensures maximum durability and prevents hot tire pickup or damage to the coating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UdolrDw4GUs</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10951-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rWGB41OICf0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Clear Topcoat — Garage Floor Epoxy Coating</video:title>
      <video:description>After the epoxy base coat and decorative flakes have dried overnight, apply a clear topcoat. This final layer seals in the flakes, provides extra durability, and gives the floor a high-gloss, protective finish. Similar to the epoxy application, use a paint brush for carefully coating the edges and corners, and a paint roller with an extension pole for the main floor areas. Ensure an even and consistent application to avoid streaks or uneven gloss. Wear a safety mask or respirator. This step typically takes 1 to 2 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rWGB41OICf0</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10951-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QFEo0sOw7Yw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Clear Coat with Anti-Skid — Garage Floor Epoxy Coating</video:title>
      <video:description>After the initial epoxy base coat has dried for 24 hours, it&apos;s time to apply the clear topcoat. This step follows a similar application process: mix the two-part clear coat kit thoroughly. The kit typically includes an anti-skid additive; make sure to mix this into the clear coat to provide slip resistance. Start by using a fresh paint brush to cut in the edges of the floor. Then, use a clean paint roller with an extension pole to roll the clear coat evenly over the entire epoxy surface. This clear coat significantly enhances the durability, adds a protective layer, and provides a beautiful shine to your newly coated garage floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QFEo0sOw7Yw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10951-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3nV2UvUoRk0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Clear Coat — Garage Floor Epoxy Coating</video:title>
      <video:description>After the epoxy coating with flakes has cured for 24 hours, prepare to apply the clear coat. Put on a &apos;respirator&apos; and &apos;gloves&apos;. In a clean &apos;Home Depot&apos; bucket, combine the &apos;Armor Ultra Wear clear coat&apos; components (Part A and Part B). Mix them thoroughly with a &apos;drill with a mixer attachment&apos; for the recommended time. As with the previous steps, use a &apos;paintbrush&apos; to carefully cut in the edges of the floor first. Then, use a &apos;paint roller&apos; on an &apos;extension pole&apos; to apply the clear coat evenly over the entire epoxy floor. Ensure the coat is applied smoothly and without puddles. Allow the clear coat to cure completely for the time recommended by the manufacturer, typically 24-72 hours, before resuming normal garage use or driving on the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3nV2UvUoRk0</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10935-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DIIcQ9zDwSw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select the Right Hedge Shears — Hedge Trimming</video:title>
      <video:description>Select the appropriate hedge shears for the job. The video recommends using a telescopic hedge shear with Teflon-coated, hardened steel blades. Look for blades with an edging that helps grab, hold, and move foliage directly off the blades. Telescopic handles are beneficial for reaching taller hedges, and aluminum handles aid in lightweightness, reducing fatigue. A rubber stopper between the handles can also help absorb shock and reduce forearm strain during extended use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DIIcQ9zDwSw</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10935-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_Dc3B2I7bu4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Appropriate Trimming Tools — Hedge Trimming</video:title>
      <video:description>The first step is to choose the appropriate tools for trimming your hedges. You have two main categories: power tools (electric or petrol hedge trimmers) and manual tools (hand shears). Power tools are faster and require less effort, making them suitable for large hedges or when time is limited. However, they can sometimes tear leaves, leading to a ragged finish, especially on larger-leafed plants like cherry laurel or Griselinia. Manual hand shears, while more labor-intensive and requiring upper body strength, provide a razor-sharp, cleaner cut. This cleaner cut allows the plant to heal quicker and results in a neater finish, which is important for plants susceptible to leaf damage from rough cuts. The presenter personally recommends electric hedge trimmers for most tasks and reserves hand shears for detailed work like topiary or small sections of hedges.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_Dc3B2I7bu4</video:player_loc>
      <video:duration>85</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10935-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aclTF92F1eg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose a Hedge Trimmer Based on Key Features — Hedge Trimming</video:title>
      <video:description>Consider several factors when selecting a hedge trimmer. First, assess your hedge size and type; small trimmers won&apos;t handle large, mature hedges with thick growth. It&apos;s recommended to purchase from a garden machinery specialist to physically handle and compare different tools, ensuring you can operate the trimmer safely and comfortably. For large hedges or prolonged use, consider models with a rotating handle, which allows for different working positions and easier high trimming (most have three positions, some five). Pay attention to noise levels; all machines have a decibel rating, with cordless models being significantly quieter than petrol ones. Trimmers with shorter blades are often lighter and easier to handle but take longer to complete jobs. Tooth spacing indicates the maximum stem width the trimmer can cut. Many trimmers include a tip protector on the blade end to prevent damage to garden structures, fences, or the blade itself if it contacts the ground. Don&apos;t overlook the blade cover; quality varies from thin plastic (prone to distortion) to rigid molded plastic or aluminum guards that fully encase the blade and are easier to use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aclTF92F1eg</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10936-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OtFSP27RFcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Hedge and Work Area — Hedge Trimming</video:title>
      <video:description>Prepare the hedge for trimming by ensuring a clear and safe working area. Lay down tarps or large sheets along the base of the hedge and the adjacent footpath to easily collect all trimmings. This minimizes cleanup time later. Inspect the hedge for any hidden obstacles, debris, or wildlife nests. Ensure you have a stable ladder or platform for safely reaching the top and upper sections of the hedge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OtFSP27RFcM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10936-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FoUaPJ9Pu7Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Area for Trimming — Hedge Trimming</video:title>
      <video:description>Before beginning the trimming process, lay out blue tarps along the base of the hedge on both sides of the area to be trimmed. This crucial step will collect the majority of the fallen hedge trimmings, significantly simplifying the cleanup process later on and protecting the ground covering beneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FoUaPJ9Pu7Y</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10936-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FuVjlGIxKsY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Trimming and Ensure Safety — Hedge Trimming</video:title>
      <video:description>Before beginning any trimming, gather all necessary tools and ensure you have appropriate personal protective equipment (PPE). Inspect the hedge for any hidden obstacles such as wires, sprinkler heads, or debris that could damage the trimmer or cause injury. Familiarize yourself with the hedge trimmer&apos;s operating instructions, especially regarding safety features and handling. For safety, it&apos;s recommended to wear eye protection, gloves, and sturdy footwear. The hedge trimmer featured in the video is described as having &apos;sharp dual blades&apos; for &apos;clean precision&apos;.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FuVjlGIxKsY</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10937-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0YvSEPFCxrI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Up String Line Guide — Hedge Trimming</video:title>
      <video:description>To ensure your hedge is trimmed evenly, start by setting up a string line as a guide. First, determine the desired height for your hedge. Then, drive one stake into the ground at each end of the hedge, making sure they are stable and positioned at the same height. If your hedge is particularly long, place additional stakes in between to prevent the string from sagging. Next, tie a roll of garden string to the first stake, stretch it across the entire length of your hedge, and then tie it securely to the second stake at the same height. This tight string will serve as your reference for keeping the top of the hedge level. Before starting to trim, step back and visually confirm that your line is straight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0YvSEPFCxrI</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10937-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hm6qb0-RGsY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Up String Line Guide — Hedge Trimming</video:title>
      <video:description>To achieve an even trim, begin by setting up stakes at both ends of the hedge. Insert the stakes into the ground or planter boxes. Once the stakes are in place, tie a string or twine to the first stake at the desired height for the top of your hedge. Stretch this string across the entire length of the hedge to the second stake and secure it at the same height. Before proceeding, double-check the string line to ensure it is perfectly straight and level, as this will act as your visual guide for trimming.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hm6qb0-RGsY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10937-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OtFSP27RFcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize and Plan the Desired Hedge Shape — Hedge Trimming</video:title>
      <video:description>Before beginning any trimming, take time to visualize the final desired shape of the hedge. For this project, the goal is to transform an overgrown conifer hedge into a well-defined rectangle, approximately 18 feet long by 8 feet high, with a curved archway integrated into one section. The video demonstrates this by overlaying an animated outline onto the existing hedge, showing the rectangular perimeter and the semi-circular arch that will serve as a through-way, following the natural curve of the footpath. This planning stage is crucial for ensuring symmetry and the correct dimensions before making any cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OtFSP27RFcM</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10938-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0YvSEPFCxrI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim the Sides of the Hedge — Hedge Trimming</video:title>
      <video:description>Before you begin trimming, ensure you are wearing appropriate safety gear including hearing protection and safety glasses. Begin trimming the sides of the hedge using a hedge trimmer. Start at the bottom of the hedge and systematically work your way upwards. This technique is beneficial as it prevents trimmed debris from falling onto sections you&apos;ve already completed, resulting in a cleaner and more efficient cut. As you move the trimmer, aim to keep its blades level and try to maintain a consistent angle along the hedge&apos;s vertical surface to achieve a professional-looking finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0YvSEPFCxrI</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10938-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S17lPHZk_sQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Bottom-Up Side Trimming — Hedge Trimming</video:title>
      <video:description>For trimming the sides of the hedge, the recommended technique is to start from the bottom and move the trimmer upwards. This should be done in a pattern, gently laying the trimmer on the bottom of the bush and moving it up, then moving over and repeating the process. This method helps in gradually shaping the bush and creating a consistent form by following the developing shape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S17lPHZk_sQ</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10938-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hm6qb0-RGsY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim the Hedges Evenly — Hedge Trimming</video:title>
      <video:description>Using a hedge trimmer, start trimming the hedge from the bottom section and work your way upwards. Maintain a steady hand and keep the hedge trimmer level, aligning its cutting blades with the string line guide you previously set up. Trim gradually and evenly across the hedge, avoiding cutting too much at once. This gradual approach helps prevent stressing the plant and ensures a uniform finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hm6qb0-RGsY</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10939-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OtFSP27RFcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim the Hedge to a Rectangular Form — Hedge Trimming</video:title>
      <video:description>Using electric or petrol hedge trimmers, begin shaping the hedge into its main rectangular form. Start with the sides, ensuring they are plumb and straight by using string lines or visual guides. Then, trim the top of the hedge to the desired height, aiming for a flat and even surface. The time-lapse in the video shows this process, quickly reducing the overgrown conifer into a neat, tall rectangular wall. Work methodically, taking small cuts at a time, and regularly step back to check the overall form and make adjustments.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OtFSP27RFcM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10939-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0YvSEPFCxrI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim the Top of the Hedge — Hedge Trimming</video:title>
      <video:description>With the sides complete, it&apos;s time to trim the top of the hedge. Use the previously established string line as your guide to ensure you&apos;re cutting straight across. Gently and steadily move your hedge trimmer along the string line. The goal is to keep everything uniform and create a perfectly level top surface. Be cautious not to trim too much at once, as over-trimming can cause stress to the plant. It&apos;s best to cut gradually and evenly, making small adjustments to achieve the desired shape and height.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0YvSEPFCxrI</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10939-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RPORbvAbX9E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim Hedges with Hand and Powered Tools — Hedge Trimming</video:title>
      <video:description>Begin trimming the top of the hedge using hand shears. For a cleaner cut and to reduce sap buildup, regularly dip the shears&apos; blades into a bucket of water. This helps to lubricate the blades and wash away sticky residues, making the job easier and more efficient. Once the initial cuts are made with hand shears, switch to battery-powered hedge trimmers for faster and more even trimming along the established string line. The key is to keep the trimmer blade flat against the hedge surface to replicate a straight cut. If trimming the sides, remember to maintain the correct aspect: for north-facing hedges, a straight edge is fine; for north-south oriented hedges, make the top narrower and the bottom broader to ensure all foliage receives adequate sunlight. After using the powered trimmer, return to hand shears to tidy up any loose bits or missed areas for a perfectly crisp finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RPORbvAbX9E</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10940-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c5DB7d8W8Iw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up Clippings — Hedge Trimming</video:title>
      <video:description>Once all trimming is complete, carefully gather the blue tarp, ensuring all the collected hedge clippings remain contained. Lift the tarp and transport the clippings to an appropriate disposal area, such as a compost pile, green waste bin, or designated yard waste collection point. After removing the tarp, perform a final check around the hedges for any stray clippings and sweep them up if necessary to leave the area pristine.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c5DB7d8W8Iw</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10940-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qhuhO0GM3NM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up Trimmings — Hedge Trimming</video:title>
      <video:description>After trimming, clean up the fallen hedge trimmings. Use a rake to gather the majority of the clippings into piles or directly into a large trash bag. Then, use a leaf blower to clear any remaining small debris from the ground and ensure the area is tidy. This final step leaves a neat and professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qhuhO0GM3NM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10940-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q6RmbBJZ85o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Collect and Dispose of Trimmings — Hedge Trimming</video:title>
      <video:description>Once all the hedge trimming is complete, carefully gather the edges of the tarpaulin, pulling them inwards to consolidate all the collected trimmings into a central pile. Roll up the tarpaulin into a more compact form, shaping it into a &apos;cone&apos; or funnel shape to effectively contain the debris. Gently lift the rolled-up tarpaulin, carrying it to your designated waste bin. Position the cone-shaped tarpaulin directly over the opening of the bin and funnel the collected trimmings downward into it. This technique allows for quick, clean, and completely mess-free disposal, eliminating the need for tedious sweeping and bagging.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q6RmbBJZ85o</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10941-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0CxCRmXIwTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Detailing and Cleanup — Hedge Trimming</video:title>
      <video:description>After the main trimming of the top and sides is complete, perform a thorough inspection of the entire hedge. Look for any uneven spots, missed branches, or areas that need fine-tuning. Use hand pruners or small hedge shears for precision trimming of individual branches or for perfecting the overall shape. Once satisfied with the trim, rake up all trimmed debris from the ground around the hedge. Collect and dispose of the trimmings properly, ideally by composting or through a municipal yard waste program.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0CxCRmXIwTk</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10941-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5R3yocprhmg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finish by Trimming Stubborn Twigs — Hedge Trimming</video:title>
      <video:description>Conclude the trimming process by going back over the hedge and carefully addressing any remaining stubborn twigs or small, unruly branches that might detract from the hedge&apos;s polished appearance. Use the hedge shears to meticulously snip these off, refining the hedge&apos;s surface and ensuring a smooth, clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5R3yocprhmg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10941-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FuVjlGIxKsY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Review Trimmed Hedge and Clean Up Clippings — Hedge Trimming</video:title>
      <video:description>Once the trimming is complete, step back and visually inspect the hedge from various angles to ensure an even, consistent shape. Make any necessary minor touch-ups. After trimming, gather all the hedge clippings from the ground. Use a rake to collect them into piles, and then use a tarp or wheelbarrow to transport them for disposal. Promptly cleaning up clippings not only maintains the aesthetic appeal of your landscape but also prevents them from smothering underlying plants or creating a breeding ground for pests.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FuVjlGIxKsY</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10926-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QMK-Kq6HV0E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Damaged Drywall Surface — Drywall Repair</video:title>
      <video:description>Begin by preparing the damaged drywall surface. Use a putty knife or a wide-bladed scraper to carefully remove any loose or crumbling plaster, paint, or drywall material from the area surrounding the hole or crack. The goal is to create a clean, stable surface for the new compound to adhere to. If necessary, use a utility knife to score and remove any particularly stubborn peeling paint or protruding fragments. This ensures a smooth base for the patch.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QMK-Kq6HV0E</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10926-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4anifphxDnk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prep the Area — Drywall Repair</video:title>
      <video:description>Carefully remove any loose edges of the torn drywall paper using a putty knife or drywall knife.  This ensures proper adhesion of the patching compound.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4anifphxDnk</video:player_loc>
      <video:duration>100</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10926-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/czkWV6BvoS0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Surface Preparation — Drywall Repair</video:title>
      <video:description>Use a putty knife or sandpaper to remove any loose pieces of paint or drywall around the damaged area. This ensures that the spackle adheres properly and creates a smooth finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/czkWV6BvoS0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10927-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c85wcsn4nf4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Drywall Patch — Drywall Repair</video:title>
      <video:description>Unpack the drywall repair patch, revealing the metal mesh on one side and a sticky backing on the other. Carefully peel off the protective paper from the sticky side of the patch. Position the patch directly over the hole in the drywall, ensuring it completely covers the damaged area. Apply gentle pressure from the center of the patch outwards towards the edges to adhere it securely to the wall and prevent any wrinkles from forming.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c85wcsn4nf4</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10927-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jxvvNyI4IOk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mesh Tape and Joint Compound Application for Larger Holes — Drywall Repair</video:title>
      <video:description>For holes larger than approximately half an inch, or those that require more structural support, start by applying self-adhesive mesh wallboard tape over the damaged area. The tape can be easily torn to your desired size by ripping it against the edge of your taping knife. Position the tape to completely cover the hole, overlapping each piece slightly if multiple pieces are needed, as demonstrated in the video where three pieces were used and overlapped. Once the mesh tape is securely in place, apply all-purpose joint compound over the tape, spreading it thinly and evenly to embed the mesh and begin smoothing out the area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jxvvNyI4IOk</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10927-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uvQK7WTkKpI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Using a Patch — Drywall Repair</video:title>
      <video:description>For fist-sized holes, use an 8&quot;x8&quot; mesh adhesive patch. Clean up the edges of the hole and press the patch firmly into place, ensuring no creases or wrinkles. Then, use a putty knife to apply a generous amount of drywall compound, pushing it into the hole and over the patch. Let it dry completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uvQK7WTkKpI</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10928-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RC1K26lpOR8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply First Coat of Joint Compound — Drywall Repair</video:title>
      <video:description>Scoop a generous amount of all-purpose joint compound into a mud pan. Using a 6-inch taping knife, apply the joint compound directly over the mesh tape. Ensure the mud completely covers and embeds the tape, filling any gaps around the patch. Apply a sufficient amount of mud to fill the recesses created by the mesh tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RC1K26lpOR8</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10928-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EbL0yeZpRDk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Joint Compound — Drywall Repair</video:title>
      <video:description>Apply a thin, even first coat of joint compound over the mesh tape and the drywall patch using a drywall knife. Feather the edges into the existing wall texture to create a smooth transition. Allow this coat to dry completely. Joint compound shrinks as it dries, so a second coat will be necessary. Apply a second, thin coat to fill in any shrunken areas and further smooth the patch. Allow this second coat to dry as well.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EbL0yeZpRDk</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10928-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9DKCzroGdV8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>First Coat Application — Drywall Repair</video:title>
      <video:description>Apply a thin layer of joint compound over the patch using a 6 inch taping knife, smoothing it out to create a smooth, even surface. Overlap the surrounding area slightly to blend it with the existing wall. </video:description>
      <video:player_loc>https://www.youtube.com/embed/9DKCzroGdV8</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10929-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N_YTNoLKnqs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drying — Drywall Repair</video:title>
      <video:description>Let the joint compound dry completely (overnight or use a hair dryer).</video:description>
      <video:player_loc>https://www.youtube.com/embed/N_YTNoLKnqs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10929-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N_YTNoLKnqs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drying — Drywall Repair</video:title>
      <video:description>Let the joint compound dry completely (overnight or use a hair dryer).</video:description>
      <video:player_loc>https://www.youtube.com/embed/N_YTNoLKnqs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10929-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N_YTNoLKnqs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drying — Drywall Repair</video:title>
      <video:description>Let the joint compound dry completely (overnight or use a hair dryer).</video:description>
      <video:player_loc>https://www.youtube.com/embed/N_YTNoLKnqs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10930-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tROm2mI3cKo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand the Drywall Repair — Drywall Repair</video:title>
      <video:description>Once all coats of joint compound are thoroughly dry, sand the repair area. For the main flat surfaces, use a power sander (like a dust-free drywall sander) to efficiently remove lap marks and achieve a general smoothness. For the edges and corners, use a sanding sponge. The key is to tilt the sponge and apply most of the pressure on the outer edge, feathering it out to prevent creating a sharp ridge or gouge in the finish. The goal is to achieve a gentle, rounded hump with perfectly feathered edges that seamlessly blend into the surrounding wall. After sanding, clean up any dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tROm2mI3cKo</video:player_loc>
      <video:duration>3102</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10930-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/unJ3kIS3jnU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand the Joint Compound — Drywall Repair</video:title>
      <video:description>Once the second coat of joint compound is dry to the touch, prepare your dustless drywall sanding sponge. The video recommends wetting the sponge slightly. Use the abrasive side first to sand down the edges and blend the repair smoothly into the existing wall surface. Switch to the softer side for finer finishing. Regularly rinse the sponge in a container of water as it collects joint compound to maintain its effectiveness. Continue sanding until the entire feathered area is smooth and the transition is imperceptible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/unJ3kIS3jnU</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10930-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DXqkab97mTg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Clean Second Coat of Joint Compound — Drywall Repair</video:title>
      <video:description>After the second coat of joint compound has thoroughly dried, sand the area again with sandpaper (e.g., 120-grit or a finer grit for a smoother finish) until it is perfectly smooth and level with the surrounding wall. Once sanded, wipe away all dust using a damp rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DXqkab97mTg</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10931-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U3ISTc3tpxw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Coat of Joint Compound — Drywall Repair</video:title>
      <video:description>After allowing the first coat of joint compound to dry for at least an hour, apply a second coat. Using a taping knife, spread a layer of joint compound over the patched area. Instead of a tight skim, apply a slightly thicker layer, about 1/16th of an inch, to effectively cover the transition between the new patch paper and the existing painted wall. This prevents a visible ridge after sanding and painting. Use smooth, consistent strokes to apply the mud, feathering the edges outward from the center of the patch to create a seamless blend with the surrounding wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U3ISTc3tpxw</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10931-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U3ISTc3tpxw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Coat of Joint Compound — Drywall Repair</video:title>
      <video:description>After allowing the first coat of joint compound to dry for at least an hour, apply a second coat. Using a taping knife, spread a layer of joint compound over the patched area. Instead of a tight skim, apply a slightly thicker layer, about 1/16th of an inch, to effectively cover the transition between the new patch paper and the existing painted wall. This prevents a visible ridge after sanding and painting. Use smooth, consistent strokes to apply the mud, feathering the edges outward from the center of the patch to create a seamless blend with the surrounding wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U3ISTc3tpxw</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10931-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dWq18CGF6OE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Second Coat and Smoothing — Drywall Repair</video:title>
      <video:description>Using the putty knife, apply a second coat of joint compound over the patch, feathering the edges out to blend with the surrounding wall. Use the hawk to support your work. Smooth the joint compound until the patch is completely covered and the surface is relatively smooth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dWq18CGF6OE</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10932-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vOq_XbVzV5c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand the Second Coat — Drywall Repair</video:title>
      <video:description>Once the second coat of joint compound is completely dry, sand the entire feathered area again using a sanding sponge. To ensure a perfectly smooth and level surface, hold a flashlight parallel to the wall. The light will cast shadows that highlight any high spots or imperfections, allowing you to sand them down until the surface is uniform. The goal is to make the repaired area as flat as possible, matching the existing wall&apos;s level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vOq_XbVzV5c</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10932-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DXqkab97mTg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Clean Second Coat of Joint Compound — Drywall Repair</video:title>
      <video:description>After the second coat of joint compound has thoroughly dried, sand the area again with sandpaper (e.g., 120-grit or a finer grit for a smoother finish) until it is perfectly smooth and level with the surrounding wall. Once sanded, wipe away all dust using a damp rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DXqkab97mTg</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10932-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GRzbOO5Sc_Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand the Surface — Drywall Repair</video:title>
      <video:description>Once the first coat of joint compound is completely dry and hard, use a sanding sponge to lightly sand the repaired area. Focus on smoothing out any high spots, ridges, or imperfections left from the taping knife. The goal is to create a flat, uniform surface for the subsequent skim coat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GRzbOO5Sc_Y</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10933-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YU1z2y11KZY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime the Repaired Area — Drywall Repair</video:title>
      <video:description>Once the final coat of joint compound is dry and sanded perfectly smooth, it&apos;s time to prime. Pour an appropriate amount of white primer into a paint tray. Using a small roller, apply the primer over the entire patched area. Start rolling in the middle of the patch and work your way outwards, feathering the edges into the surrounding wall. This technique helps to blend the new primer with the existing paint, preventing a harsh line once the final paint is applied. Allow the primer to dry for at least an hour, or as recommended by the product manufacturer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YU1z2y11KZY</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10933-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nDUDJdfQKis/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime the Repaired Area — Drywall Repair</video:title>
      <video:description>After the final coat of drywall compound has fully dried (which may take a few hours), it&apos;s time to prime the repaired area. Pour Zinsser Drywall Primer into a paint tray and use a roller (the 1/2-inch nap roller for textured walls is appropriate here) to apply an even coat over the entire patch and slightly onto the surrounding wall. Priming is a critical step as it seals the compound, provides a uniform base for paint, and most importantly, highlights any remaining imperfections or uneven spots that might not have been visible before. This allows for final touch-ups before proceeding to texturing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nDUDJdfQKis</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10933-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KNJLPBfGu4s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime and Paint — Drywall Repair</video:title>
      <video:description>With the joint compound repair fully dried, smoothed, and cleaned, the area is ready for painting. Apply a coat of primer, especially if the joint compound is a different color or texture than the surrounding wall, to ensure even paint absorption. Once the primer is dry, apply the desired paint to match the rest of the room. This final step will make the crack completely disappear, leaving a robust and beautiful wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KNJLPBfGu4s</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10934-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nBeDa3OWzN8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint Repaired Area — Drywall Repair</video:title>
      <video:description>After the primer has dried completely, take a small paint roller and apply paint to the primed areas. Make sure to use paint that matches the existing wall color. Apply the paint in a way that blends the repaired spots with the rest of the wall, ensuring seamless coverage. You may need to apply a second coat if necessary, allowing adequate drying time between coats.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nBeDa3OWzN8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10934-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YU1z2y11KZY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Paint to the Repaired Area — Drywall Repair</video:title>
      <video:description>After the primer has dried completely, apply the final paint coats. Pour the wall paint (matching the existing wall color) into a clean paint tray. First, use a paintbrush to carefully &apos;cut in&apos; along the edges where the wall meets the cabinets or trim. Then, use a small roller to apply the paint to the main patched area, again starting in the middle and feathering out to blend seamlessly with the surrounding wall. Apply a second coat of paint if necessary, following the same cutting-in and rolling technique, to ensure complete coverage and a uniform finish. The goal is to make the repaired crack completely disappear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YU1z2y11KZY</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10934-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7iHTs5U7CXI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Topcoat Paint — Drywall Repair</video:title>
      <video:description>Once the primer is completely dry, apply the final topcoat of paint. Use paint that matches the color and finish of the existing wall. Apply the paint evenly over the primed patch, extending slightly beyond its edges to blend seamlessly with the surrounding wall. Depending on the paint and desired coverage, you may need to apply two coats, allowing adequate drying time between each.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7iHTs5U7CXI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10921-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ltfYVjIRCa8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Securely Position the Ladder — Gutter Cleaning</video:title>
      <video:description>Before raising the ladder, assess the ground conditions. If the ground is hard and flat (like gravel), ensure the ladder&apos;s anti-slip grips are down. If the ground is soft dirt or has a slight slope, flip the ladder feet up to expose pointed ends that can dig into the ground for better stability. To check the proper angle, place your feet at the base of the ladder, then extend your arms straight out in front of you at shoulder height. If you can comfortably touch the rung directly in front of you, the ladder is at approximately a 75-degree angle, which is ideal. Additionally, ensure the top of the ladder extends at least 3 feet (about 0.9 meters) above the roofline to provide a secure handhold and easy transition to and from the roof.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ltfYVjIRCa8</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10921-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uhaO2uyVWdU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Up Ladder Safely — Gutter Cleaning</video:title>
      <video:description>Before beginning the roof inspection, safely set up your ladder. Extend the ladder so that it reaches well above the edge of the roof, providing stability and a secure handhold when ascending and descending. If working in snowy or icy conditions, ensure the ladder&apos;s base is on a surface that provides adequate grip. Check the ladder&apos;s angle to ensure it is proper and stable. Some ladders may have a designation on the edge indicating the correct angle; if so, refer to it. Confirm overall stability before climbing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uhaO2uyVWdU</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10921-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hr-JW3lxyPk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ensure Ladder Safety — Gutter Cleaning</video:title>
      <video:description>Before beginning the cleaning process, ensure crucial safety measures are in place. Always position the ladder&apos;s base firmly on solid ground to prevent instability. The ladder should also extend at least 3 feet above the roofline, providing a secure grab point and ensuring you don&apos;t have to overreach.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hr-JW3lxyPk</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10922-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IX-pv3cH6Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Large Debris — Gutter Cleaning</video:title>
      <video:description>Starting near a downspout, put on your work gloves, optionally layering latex gloves underneath to keep your hands dry. Begin by manually removing large debris such as leaves, twigs, and pine needles. Deposit this debris into one of the buckets attached to your ladder. For more compacted or stubborn debris, use a trowel or gutter scoop to scrape and remove it effectively. Pay close attention to the downspout strainer and remove any trapped debris to ensure clear passage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IX-pv3cH6Y4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10922-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KdT2wxwZ0Po/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Large Debris by Hand — Gutter Cleaning</video:title>
      <video:description>Once safely on the ladder, use your gloved hands to clear out all large debris from the gutters. This includes leaves, twigs, pine needles, and any other loose materials. Collect the debris in a bucket or on a tarp on the ground for easy disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KdT2wxwZ0Po</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10922-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4sXY5AN0hv0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Large Debris — Gutter Cleaning</video:title>
      <video:description>Begin by safely ascending a ladder to reach the gutters. The first task is to remove large debris such as twigs and dried leaves from the gutter trough. The presenter demonstrates using bare hands for this initial removal of bulkier items.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4sXY5AN0hv0</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10923-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4sXY5AN0hv0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush Gutters with Water — Gutter Cleaning</video:title>
      <video:description>Once the majority of the solid debris is removed, use a garden hose with a spray nozzle to flush out any remaining grime and small particles. Start flushing from the end of the gutter opposite the downspout, directing the water flow towards the downspout. This ensures that any residual dirt is pushed down the gutter and out through the downspout, leaving the gutter clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4sXY5AN0hv0</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10923-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IX-pv3cH6Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush Gutters — Gutter Cleaning</video:title>
      <video:description>After clearing the solid debris, attach a spray nozzle to your garden hose. Turn on the water and begin flushing the gutters. A helpful technique is to start flushing at the end farthest from the downspout, allowing the water to carry any remaining small particles towards the downspout. Observe the water coming out of the downspout. If the flow is significantly less than the amount of water going in, it indicates a clog in the downspout itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IX-pv3cH6Y4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10923-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KdT2wxwZ0Po/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wash Gutters with Hose — Gutter Cleaning</video:title>
      <video:description>With all visible debris removed, use a garden hose with a high-pressure nozzle to wash out the gutters. Start from the end opposite the downspout and systematically flush the remaining grit and dirt towards the downspout. Observe the water flow to ensure it drains properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KdT2wxwZ0Po</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10924-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IX-pv3cH6Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Downspout Clogs — Gutter Cleaning</video:title>
      <video:description>If you identified a clog in the downspout during the flushing step, you&apos;ll need to address it. Guide your garden hose up the downspout from the bottom, or down from the top if accessible. Turn the water on at full pressure to attempt to dislodge the clog. Continue flushing until water flows freely and without obstruction. If the clog does not dislodge with water pressure, you may need to use a plumber&apos;s snake to break it up and push it through.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IX-pv3cH6Y4</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10924-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nkFf5r7dtF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unclog Downspouts — Gutter Cleaning</video:title>
      <video:description>If your gutter is not draining properly after cleaning, there&apos;s likely a clog in the downspout. For downspouts that are one solid piece, you will need to remove the bands securing it to the house using a drill. Once detached, slide the downspout out and flush it thoroughly with a garden hose to clear any obstructions. Reattach the downspout to the house. If you have a short piece of downspout running into a drainage system, only remove that short piece. Cover the open pipe of the drainage system with a bucket or measuring cup to catch any dislodged debris. Then, feed a hose nozzle up the downspout, spraying with full pressure to release the clog. If the hose method doesn&apos;t work, try using a drum auger, also known as a plumber&apos;s snake. Feed the auger up through the downspout until it stops. Lock the collar, then spin the line as you feed it further into the downspout. Once the clog is broken, pull the auger back out. This type of auger can also be used with a drill for added power. After clearing the clog, reattach any removed downspout pieces and flush the gutters again with the hose to ensure complete drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nkFf5r7dtF8</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10924-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MBZXinQg3Fo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Downspout Blockages — Gutter Cleaning</video:title>
      <video:description>Begin by addressing the downspouts, as they are crucial for directing water away from your home. First, manually clear any large debris visible at the top opening of the downspout. Then, take your garden hose and insert it into the top of the downspout, blasting water downwards to dislodge and flush out any blockages. If water still doesn&apos;t flow freely from the bottom exit of the downspout, insert the hose from the bottom opening and push water upwards. This back-and-forth action helps to break up and remove stubborn clogs that may not clear from the top down.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MBZXinQg3Fo</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10925-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IX-pv3cH6Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Fasteners and Inspect Gutters — Gutter Cleaning</video:title>
      <video:description>With the interiors cleaned and leaks addressed, inspect the entire gutter system, including all sections and downspouts, for secure attachment to the house. Ensure that all gutter fasteners (e.g., spikes and ferrules, hidden hangers, or straps) are tight and properly holding the gutters in place. If any fasteners are loose or missing, add support hangers or reattach the gutters to the fascia board as needed using appropriate gutter hardware and a drill. Also, take this opportunity to visually inspect for any physical damage, such as dents, cracks, or loose sections, which may require further repair or replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IX-pv3cH6Y4</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10925-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KdT2wxwZ0Po/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Gutter Hangers — Gutter Cleaning</video:title>
      <video:description>Check all gutter hangers for any looseness or missing components. Tighten any loose hangers using a screwdriver or a drill with the appropriate driver bit. Replace any missing or severely damaged hangers to ensure the gutters are securely attached to the fascia board and can withstand the weight of water and debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KdT2wxwZ0Po</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10925-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IX-pv3cH6Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Drainage and Seal Leaks — Gutter Cleaning</video:title>
      <video:description>Once the gutters and downspouts are clear, perform a final flush with the garden hose to confirm proper flow and drainage. As the water flows, carefully inspect all seams and joints along the gutters for any leaks. If you identify any leaks, use gutter sealant in a caulk gun to make the necessary repairs. Apply the sealant directly to the leaky areas, ensuring a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IX-pv3cH6Y4</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10912-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WghjpBHmy40/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform a Soil Test (Perc Test) — Septic System Installation</video:title>
      <video:description>Before installing a septic system, a crucial step is to conduct a soil test, often called a &apos;perc test&apos; (percolation test) or a soil evaluation. This test helps determine the soil&apos;s absorption rate, which dictates the type of septic system suitable for the property. Different soil types have varying capabilities to absorb treated wastewater; for example, some soils might require a holding tank that needs regular pumping, while others can support a drain field system where wastewater is treated and discharged into the soil. The video shows an example of a soil evaluation report, which provides detailed information about soil layers, absorption rates, and recommendations for the appropriate septic system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WghjpBHmy40</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10912-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-naaVVmCQiQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Site Assessment &amp; Septic System Planning — Septic System Installation</video:title>
      <video:description>Begin by understanding the necessity of a septic system in a rural residential construction project where municipal sewage is unavailable. The system typically comprises a septic tank, a distribution box (often referred to as the &apos;brain&apos;), and a septic field with multiple trenches. Assess the site&apos;s topography to ensure adequate elevation differences for a gravity-fed system, which is crucial for efficient waste flow. For example, the septic field in the video is approximately 75 feet long and contains four trenches spaced about 10 feet apart, positioned lower than the house and the septic tank to utilize natural drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-naaVVmCQiQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10914-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t8GUWXsmW54/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Building Permit — Septic System Installation</video:title>
      <video:description>The first and most critical stage of any construction project is obtaining the necessary permits. This involves securing both planning permission and building regulation approval. Planning permission requires submitting architectural general arrangement drawings, including floor plans, sections, elevations, and a comprehensive site plan, for review. Building regulation approval, or a building permit, necessitates more detailed architectural drawings, such as specific door and window types, along with structural engineer&apos;s drawings and potentially mechanical, electrical, and plumbing (MEP) engineer&apos;s drawings. These documents must adhere to local building construction codes. All this information is submitted to the local government or relevant department for review and approval. Without these permits, initiating construction is illegal and can lead to severe penalties, including fines, forced demolition of the structure, or even imprisonment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t8GUWXsmW54</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10914-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/44gTPx_ouOM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Submit Permit Application and Await Approval — Septic System Installation</video:title>
      <video:description>After all the required documents are gathered and prepared, submit them to the relevant local self-government body (municipality, corporation, or panchayat) for the building permit. It is crucial to await approval before initiating any construction work. The speaker explicitly warns against starting construction without a permit, listing severe consequences such as: denial of house numbers, inability to obtain permanent or temporary electricity and water connections, difficulty securing home loans, and potential demolition of the structure if building rules are violated. This step underscores the importance of legal compliance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/44gTPx_ouOM</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10914-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LP60Tus4okA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Meet with a Permit Technician — Septic System Installation</video:title>
      <video:description>Engage with a permit technician at the building department. They can provide the specific application and information you need to secure a permit. It&apos;s crucial to get all the correct information upfront to avoid delays and ensure your project complies with local regulations. Some building departments may send you an email with the application, while others require you to visit in person.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LP60Tus4okA</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10915-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3I1j0x51Wv8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Excavate Trenches and Tank Hole for New System — Septic System Installation</video:title>
      <video:description>Using the mini-excavator, continue digging a series of trenches from the house towards the new septic tank location, which will be about 50 feet away on the other side of the lawn. Carefully dig the trenches to the required depth and ensure a proper grade using a level stick and measuring tape. The old sprinkler lines encountered during excavation should be removed. During this process, a separate deeper hole is also excavated for the new concrete septic tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3I1j0x51Wv8</video:player_loc>
      <video:duration>203</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10915-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PID3bMjXbMI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Excavate and Level Septic Tank Pit — Septic System Installation</video:title>
      <video:description>After the field line trenches are dug, a larger hole is excavated for the two-compartment, 900-gallon concrete septic tank. The bottom of this pit must be perfectly level to ensure the tank settles correctly and functions properly. A worker enters the pit to rake and level the base, preparing it for the tank&apos;s arrival.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PID3bMjXbMI</video:player_loc>
      <video:duration>103</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10915-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m0RcNKoENm4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Excavate and Level the Tank Hole — Septic System Installation</video:title>
      <video:description>Excavate the marked area for the septic tank to the required depth. Ensure the hole has straight, clean, and square edges, as this indicates a professional installation. The bottom of the excavation must be precisely leveled and compacted to provide a stable and flat bed for the heavy concrete tank. Use a grade laser or a transit for accuracy. In the absence of specialized equipment, a long 2x4 with a spirit level can be used to achieve a level surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m0RcNKoENm4</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10916-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-naaVVmCQiQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing the Septic Tank and Connections — Septic System Installation</video:title>
      <video:description>Position the pre-cast concrete septic tank at a lower elevation than the house but higher than the distribution box and septic field. This large concrete vault is designed to hold household wastewater, allowing solids to settle and floatables to separate, with anaerobic bacteria breaking down organic matter. The tank typically has thick concrete walls (e.g., 3 inches) and a robust top (e.g., 5 inches thick) to withstand ground pressure. Connect the main waste line from the house to the septic tank and the septic tank&apos;s outlet to the distribution box, ensuring all connections are watertight. Adherence to local building codes and health department regulations is paramount for septic system installation, and obtaining the necessary permits is a mandatory prerequisite.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-naaVVmCQiQ</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10916-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3I1j0x51Wv8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Concrete Septic Tank and Risers — Septic System Installation</video:title>
      <video:description>Install the new concrete septic tank using a crane truck due to its significant weight (a 1,000-gallon tank can weigh several tons). The tank must be carefully lowered into the excavated hole. Once the tank is settled, install green corrugated plastic risers onto the access openings of the tank. These risers provide an accessible pathway to the tank for future pumping and maintenance, especially useful when the tank is buried deep underground. Apply sealant around the base of the risers to ensure a watertight seal before fitting the lids.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3I1j0x51Wv8</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10916-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m0RcNKoENm4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Tank Placement and Level — Septic System Installation</video:title>
      <video:description>Once the septic tank is settled in the excavation, perform a final check to ensure it is perfectly level. Place a spirit level across the top of the tank to confirm it sits flat. Verify that the inlet and outlet pipes are correctly oriented and that the inspection risers are aligned. The tank should be stable and ready for connecting to the house&apos;s waste line and the leach field system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m0RcNKoENm4</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10917-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8uTuVWrPslU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing Perforated Pipes and Washed Rock — Septic System Installation</video:title>
      <video:description>Perforated white PVC pipes are laid in the bottom of the excavated trenches for the drain field. These pipes have holes on the bottom to allow the treated wastewater to drain into the surrounding soil. The pipes are carefully set on wooden stakes to ensure they are at the perfect, level height, which is about 6 inches above the trench bottom. After the pipes are in place, washed rock is carefully poured into the trenches, completely surrounding the pipes. This rock layer provides an area for the water to dissipate and for biological treatment to occur.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8uTuVWrPslU</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10917-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jBZxP09oriA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Permeable Base Layer — Septic System Installation</video:title>
      <video:description>Once the trenches are ready, a base layer of permeable material, typically washed sand or gravel (usually 3/4 inch to 1.5 inch clean stone), is spread at the bottom of the trenches. This layer serves multiple purposes: it provides a stable and level bed for the drainage components and offers an initial filtration medium. This granular material is carefully spread and leveled to ensure uniform depth and support across the entire leach field area. The video shows the excavated trenches with what appears to be a light-colored sandy material forming the base of the leach field area, suggesting this layer has been successfully installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jBZxP09oriA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10917-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K-5z7D-LDZo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drain Field and Transport Lines — Septic System Installation</video:title>
      <video:description>Excavate trenches for the drain field, ensuring they are deep enough to prevent freezing, especially in cold climates. Lay the black polyline transport pipe in these trenches, leading from the septic tank&apos;s pump discharge to the drain field area. Install low-profile infiltrator domes (chambers) in the trenches. These domes provide an open area for effluent to percolate into the soil, and their low profile allows for shallower trenching, reducing excavation time and labor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K-5z7D-LDZo</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10918-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K-5z7D-LDZo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect House to Septic Tank and Install Internal Components — Septic System Installation</video:title>
      <video:description>Connect the main waste pipe from the house to the septic tank&apos;s inlet. Within the septic tank, install a sanitary T fitting on the inlet pipe. This fitting serves to diffuse the velocity of incoming waste and promote better separation of solids from the liquid effluent, preventing disturbances to the settled layers in the tank. Ensure all connections are secure and watertight. The high-head pump will be installed in the second compartment of the tank, with its discharge line leading out towards the drain field.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K-5z7D-LDZo</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10918-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PID3bMjXbMI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Septic Tank and Field Lines — Septic System Installation</video:title>
      <video:description>A concrete septic tank is delivered to the site and carefully lowered into the prepared pit. The tank is a two-compartment design, where solids settle in the first chamber, and liquid flows into the second before discharging into the field lines. The 3-inch pipe stubbed out from the house&apos;s plumbing is connected to the inlet of the septic tank, including a cleanout access point for future maintenance. The outlet pipe from the septic tank is then connected to the field lines. The presenter notes that they use &apos;Easy Flow Pipe,&apos; a gravelless pipe system filled with styrofoam peanuts and covered in a mesh, which the subcontractor prefers over traditional chamber pipe for its ease of installation and performance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PID3bMjXbMI</video:player_loc>
      <video:duration>150</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10918-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RR9dRzhvUPs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install PVC Piping for Inlet, Overflow, and Outlet — Septic System Installation</video:title>
      <video:description>Install PVC pipes for the septic tank&apos;s functionality. First, place a 4-inch PVC pipe (Series 900) as the inlet from the toilet/CR. Next, connect a 3-inch PVC pipe (Series 1000) with a T-fitting to create an overflow from the first chamber to the second. This design allows solids to settle in the first chamber, with only liquid flowing into the second. Finally, install a 2-inch PVC pipe (Series 1000) as the outlet for the treated effluent, directing it to a drainage canal. Ensure all pipe connections are sealed with solvent cement for a leak-proof system. The outlet pipe should be positioned slightly lower than the overflow pipe from the first chamber to facilitate gravity flow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RR9dRzhvUPs</video:player_loc>
      <video:duration>108</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10919-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PID3bMjXbMI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspection, Backfilling, and Grading — Septic System Installation</video:title>
      <video:description>After the septic tank and field lines are installed and all connections are made, a state inspector conducts a final inspection to ensure compliance with all health and safety regulations. Once approved, a bulldozer is used to backfill the trenches and cover the septic tank. The disturbed area is then graded to blend with the surrounding landscape, ensuring proper surface drainage away from the house and the septic system components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PID3bMjXbMI</video:player_loc>
      <video:duration>218</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10919-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8uTuVWrPslU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfilling and Final Grading of Drain Field — Septic System Installation</video:title>
      <video:description>The drain field trenches are backfilled with the excavated soil using a skid steer loader. The soil is carefully pushed back over the kraft paper. Once the trenches are filled, the entire area is graded and leveled to prepare for planting grass. The presenter shows the finished drain field with evenly mounded trenches and mentions his plan to plant grass seed to ensure the area remains green and stable, preventing it from becoming a mud pit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8uTuVWrPslU</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10919-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QNHPRlW8H2Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Touches and Landscaping — Septic System Installation</video:title>
      <video:description>Complete the project by performing the final touches and landscaping. Backfill the excavated areas around both the septic tank and the soak pit with soil, carefully compacting it to prevent settlement. Ensure that the surrounding ground is landscaped in such a way that rainwater and surface runoff are directed away from the septic tank and soak pit walls. This prevents excess water from infiltrating the system, which can overload it or affect its efficiency. A crucial final rule before using the septic system is to fill the septic tank completely with water. This helps to establish the water level, compact any remaining loose soil, and provide the necessary liquid environment for the initial bacterial action to begin effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QNHPRlW8H2Y</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10920-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PID3bMjXbMI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspection, Backfilling, and Grading — Septic System Installation</video:title>
      <video:description>After the septic tank and field lines are installed and all connections are made, a state inspector conducts a final inspection to ensure compliance with all health and safety regulations. Once approved, a bulldozer is used to backfill the trenches and cover the septic tank. The disturbed area is then graded to blend with the surrounding landscape, ensuring proper surface drainage away from the house and the septic system components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PID3bMjXbMI</video:player_loc>
      <video:duration>218</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10920-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WghjpBHmy40/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalize Site Grading and System Completion — Septic System Installation</video:title>
      <video:description>The septic system installation is complete, with the tanks buried and the area nicely graded. The video shows the final appearance of the installation site, with the three access covers (manholes) now visible at the surface, ready for future maintenance and inspection. The ground around the system has been smoothed and prepared, indicating the conclusion of the heavy construction phase. The narrator expresses hope that the provided information assists viewers with their own septic system endeavors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WghjpBHmy40</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10920-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sk8xHVERh3s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pass First County Inspection — Septic System Installation</video:title>
      <video:description>After the initial installation and backfilling, the county inspector visits the site. The inspector, being unfamiliar with this specific unconventional system, primarily focuses on verifying the trench&apos;s depth and length, relying heavily on the submitted design plans. The system successfully passes this first inspection, marking a significant milestone in the project.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sk8xHVERh3s</video:player_loc>
      <video:duration>86</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10910-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — I want to install carpeted treads on my steps</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10910-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — I want to install carpeted treads on my steps</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10910-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — I want to install carpeted treads on my steps</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10911-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — I want to install carpeted treads on my steps</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10911-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e42OOnatZvs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Align and Install Carpet Stair Tread — I want to install carpeted treads on my steps</video:title>
      <video:description>Begin by taking one pre-made carpet stair tread and positioning it on the first wooden stair. Carefully align the front edge of the carpet tread with the front edge of the stair. Ensure the tread is centered horizontally on the step, leaving an even gap on both sides. Once the tread is perfectly aligned, firmly press it down onto the stair surface, working from the front edge towards the back. This action activates the adhesive backing or secures the non-slip material integrated into the tread, ensuring it adheres securely to the wooden stair. Repeat this process for each subsequent stair, maintaining consistent alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e42OOnatZvs</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10911-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — I want to install carpeted treads on my steps</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10902-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/D0nykYr0poE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Seal All Ductwork Openings — Air Duct Cleaning</video:title>
      <video:description>Before conducting the test, prepare the house by sealing all supply and return duct openings. This is done by covering each vent with a transparent plastic sheeting or specialized tape to create an airtight seal, preventing any air from escaping or entering the duct system through these openings. The presenter demonstrates sealing a ceiling vent and a floor vent with tape, and another person is shown sealing a large wall-mounted return vent. Once all vents are sealed, insert a pressure probe into one of the sealed registers, ensuring it is properly secured to measure the pressure within the duct system accurately.</video:description>
      <video:player_loc>https://www.youtube.com/embed/D0nykYr0poE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10902-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2ska48HcMU8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal All Plastic Edges — Air Duct Cleaning</video:title>
      <video:description>Ensure all seams and edges of the plastic sheeting are fully sealed to prevent dust leakage. Use painter&apos;s blue tape to seal the top edges of the plastic sheeting to the ceiling, creating a tight seal. For the bottom edges, where the wall plastic meets the floor plastic, use a strong, adhesive tape like Gorilla tape to create a robust, plastic-to-plastic seal. This dual-taping method ensures maximum containment efficiency.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2ska48HcMU8</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10902-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Mmp4AyvviHI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Wall-Mounted Vents with Masking Tape — Air Duct Cleaning</video:title>
      <video:description>For wall-mounted vents, particularly those near split system air conditioners or old combustion air vents that are no longer in use, apply masking tape (white painters tape) to temporarily seal them off. Ensure the surface around the vent is clean before applying the tape. Carefully tear or cut strips of tape and press them firmly over the vent grilles. This method is easily removable and reversible, making it ideal for rental properties where permanent alterations are not allowed or desired.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Mmp4AyvviHI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10903-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Rw4riExWfUQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Access Indoor Air Handler — Air Duct Cleaning</video:title>
      <video:description>Return inside the house and locate the indoor air handler unit. This unit is typically found in a utility closet, attic, or basement. The video shows entering a closet, initially dark, and then revealing the air handler. The narrator explicitly states it&apos;s an &apos;indoor unit right behind this door.&apos; Ensure clear access to the unit for further inspection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Rw4riExWfUQ</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10903-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YwFkhTqgazM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the Blower Unit — Air Duct Cleaning</video:title>
      <video:description>Begin by removing the panels of the air handler or furnace. Before proceeding, ensure the power to the unit is completely off by switching off the electrical disconnect. Once power is off, disconnect the blower motor wiring plugs and any ground wires or screws holding the blower housing in place. Carefully slide the blower housing out, being cautious not to damage any wires or components that may be in the way.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YwFkhTqgazM</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10903-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4cydNuaY2mI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Introduction and Safety Precautions — Air Duct Cleaning</video:title>
      <video:description>Begin by observing the air handler unit. The video highlights the importance of this maintenance for efficiency and clean air, as dust buildup on the blower fan can significantly impact performance. Before proceeding with any work, locate the main breaker for the HVAC system, typically in the garage or a service panel, and turn it off to ensure safety. Additionally, inside the air handler unit, locate and switch off the local breaker. This dual disconnection provides maximum electrical safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4cydNuaY2mI</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10904-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qkeBQlAvHUE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Blower Wheel — Air Duct Cleaning</video:title>
      <video:description>With the blower unit removed, proceed to clean the blower wheel thoroughly. Use a brush to meticulously remove all the caked-on dirt and debris from each fin of the blower wheel. For heavily soiled areas, a vacuum cleaner with a brush attachment or a specialized coil cleaner spray can be used in conjunction with the brush. Ensure all surfaces are clean to maximize airflow and efficiency. After cleaning, the wheel should appear significantly cleaner, as demonstrated in the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qkeBQlAvHUE</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10904-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MODIBXCGuRE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Blower Wheel — Air Duct Cleaning</video:title>
      <video:description>Once the blower motor and wheel assembly is out, inspect the blower wheel fins for accumulated dust and debris. Use a shop-vac equipped with a brush attachment to thoroughly vacuum all the dust from between the fins and the surrounding housing. For stubborn or heavily caked-on debris, you may need to use a stiff brush to dislodge it before vacuuming. The video suggests that for very heavy cleaning, the motor could be unbolted from the housing (four bolts and a grounding screw), and the wheel could be hosed off or cleaned with an air compressor outside, then allowed to dry completely before reassembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MODIBXCGuRE</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10904-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4cydNuaY2mI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cleaning the Blower Fan — Air Duct Cleaning</video:title>
      <video:description>Position the blower fan assembly so that the blades are easily accessible. A hard toothbrush is recommended for scrubbing the caked-on dust from the fan blades. Avoid using chemical cleaners, as they are often unnecessary and can potentially damage components. As you clean, pay close attention to avoid disturbing any small metal clips or weights attached to the fan blades; these are factory-installed balancing weights, and removing them can cause severe vibrations and damage to the motor during operation. After manually brushing off the dust, use a leaf blower or similar air blower to thoroughly blow out all loosened dust and debris from the fan and motor assembly. This will clear the fan&apos;s vents and ensure optimal airflow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4cydNuaY2mI</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10905-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2xu7pKLu8e4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Vacuum System and Prepare Agitation Tool — Air Duct Cleaning</video:title>
      <video:description>Attach a large, flexible vacuum hose from a powerful central vacuum system to one of the newly created access points in the ductwork. This creates a strong suction that will draw dislodged debris out of the system. In tandem, prepare the agitation tool, often called a &apos;whip,&apos; which consists of multiple tentacles that spray compressed air. This tool will be inserted into other access points to agitate and loosen debris from the duct walls, allowing the vacuum to capture it. The process is described as turning the entire duct system into a &apos;big vacuum cleaner.&apos;</video:description>
      <video:player_loc>https://www.youtube.com/embed/2xu7pKLu8e4</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10905-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qBIU4FDdpBs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum Interior of Air Ducts — Air Duct Cleaning</video:title>
      <video:description>While the cleaned vents are drying, take the opportunity to clean the interior of the exposed air duct openings. Use a shop vacuum with a hose attachment to thoroughly vacuum out any accumulated dust, debris, and loose particles from inside the ducts. Insert the vacuum hose as far as possible into the openings of wall vents, floor vents, and any other accessible vents such as bathroom exhaust fans, ensuring you capture as much debris as possible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qBIU4FDdpBs</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10905-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2xu7pKLu8e4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Return Ducts — Air Duct Cleaning</video:title>
      <video:description>After cleaning the supply side, the focus shifts to the return air side. The technician will &apos;tighten up&apos; the branches, meaning he ensures all branches leading to the main return trunk are sealed or directed towards the vacuum. He then removes the return air grills upstairs and inserts the agitation tool as far as possible down each return branch. The tool&apos;s action dislodges any remaining debris, driving it towards the central vacuum system for final collection. This thorough pass ensures that all parts of the return system are clear of contaminants, including any debris that might have been caught on internal screws or fittings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2xu7pKLu8e4</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10906-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bWCr66fX_k4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Branch Ductwork (Air Wash &amp; Brush) — Air Duct Cleaning</video:title>
      <video:description>Begin the internal duct cleaning by first taking &apos;before&apos; pictures of the branch ductwork through the open vent. Then, a specialized air washing tool is inserted into each branch line to blast away loose dust and debris. If necessary, a cable-driven rotating brush is used to scrub the interior surfaces of the ductwork, dislodging stubborn buildup. Another air wash then pushes all the loosened particles down the branch line towards the main negative air vacuum system for collection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bWCr66fX_k4</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10906-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2xu7pKLu8e4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Agitate and Vacuum Supply Ducts — Air Duct Cleaning</video:title>
      <video:description>Insert the agitator tool into the ductwork through the previously made access points. Activate the air compressor to make the tentacles of the agitator whip around, spraying air and dislodging accumulated debris from the interior surfaces of the ducts. The powerful central vacuum, connected elsewhere in the system, simultaneously sucks up the airborne debris. The video shows the large amount of dust and dirt collected in the vacuum hose after cleaning the supply side, demonstrating the effectiveness of this method. Repeat this process for all branches and sections of the supply ducts, ensuring thorough cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2xu7pKLu8e4</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10906-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qBIU4FDdpBs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum Interior of Air Ducts — Air Duct Cleaning</video:title>
      <video:description>While the cleaned vents are drying, take the opportunity to clean the interior of the exposed air duct openings. Use a shop vacuum with a hose attachment to thoroughly vacuum out any accumulated dust, debris, and loose particles from inside the ducts. Insert the vacuum hose as far as possible into the openings of wall vents, floor vents, and any other accessible vents such as bathroom exhaust fans, ensuring you capture as much debris as possible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qBIU4FDdpBs</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10907-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2xu7pKLu8e4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Sanitizing Fog and Final System Treatment — Air Duct Cleaning</video:title>
      <video:description>After all physical debris has been removed, introduce a fogger into the duct system. This device is used to aerosolize and distribute a sanitizing product, such as &apos;Benefect,&apos; throughout the entire ductwork. Run the fogger for approximately five minutes to ensure adequate coverage. This product is described as a non-toxic, natural, alcohol-molecule based solution that effectively kills mold, bacteria, and viruses. It continues to work for about 4-6 months, inhibiting future microbial growth. This final step significantly improves the air quality by eliminating biological contaminants that contribute to odors and health issues.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2xu7pKLu8e4</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10907-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i9h3wfcg1gk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply to HVAC Return Vent — Air Duct Cleaning</video:title>
      <video:description>Apply the prepared Duct Aid spray can to a clean surface of an air conditioning return vent. The can is designed with a magnetic attachment, allowing it to securely adhere to the metal surface of the vent. Once positioned, firmly press down on the deployment valve (the button on the cap) to release the deodorizer and sanitizer into the air duct system. The product, which contains Thymol, is effective in treating bad odors and mold, working the &apos;natural way&apos; to improve air quality.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i9h3wfcg1gk</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10907-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i9h3wfcg1gk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Read Instructions — Air Duct Cleaning</video:title>
      <video:description>Begin by familiarizing yourself with the Duct Aid HVAC Air Duct System Deodorizer with Thymol spray. Carefully read the instruction panel located on the side of the can to understand the product&apos;s usage, safety precautions, and specific directions for optimal results. This ensures you are aware of how to properly and safely apply the deodorizer and sanitizer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i9h3wfcg1gk</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10908-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YwFkhTqgazM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test the Blower Unit — Air Duct Cleaning</video:title>
      <video:description>Once the blower wheel and housing are completely dry, bring them back inside. Reassemble the motor to the blower housing, making sure it&apos;s fastened securely. Grease the motor shaft with silicone grease or another appropriate lubricant before reattaching the blower wheel. Slide the blower wheel back onto the shaft, ensuring it is perfectly centered and aligned. Spin the wheel by hand to check for any rubbing or abnormal noises before tightening the set screw. Reinsert the entire blower assembly back into the air handler, fastening it with the screws. Reconnect all electrical wiring, ensuring they are properly routed and securely connected. Finally, restore power and run test the blower motor to check for abnormal noises and check the current draw. Test the rest of the HVAC equipment to ensure full functionality.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YwFkhTqgazM</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10908-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4cydNuaY2mI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstallation and Final Checks — Air Duct Cleaning</video:title>
      <video:description>Once the blower fan is clean, carefully slide it back into the air handler, aligning it with the slider mechanisms. Re-secure the fan assembly with the bolts you removed earlier. Reconnect all electrical wires to their original positions, referring to your photos or labels to ensure accuracy. Make sure all connections are secure. Finally, reattach the top cover of the air handler unit. After confirming everything is properly reassembled, return to the main breaker and turn the power back on. Then, switch on the local breaker inside the air handler. Your HVAC system is now ready to operate with improved efficiency and cleaner airflow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4cydNuaY2mI</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10908-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GNdwsD-ZCeA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Reassembly and System Testing — Air Duct Cleaning</video:title>
      <video:description>Once all cleaning is complete, reattach the main front cover to the unit, ensuring all clips engage securely and it clicks into place. Power on the unit using the remote control. Set it to fan mode first to check the new blower motor&apos;s operation, listening for a smooth and quiet sound. Then, switch to heating mode (or cooling, depending on desired operation) and confirm that the unit is blowing air at the correct temperature and operating efficiently. Observe the blower wheel to ensure it&apos;s spinning cleanly and quietly, indicating successful repair and cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GNdwsD-ZCeA</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10909-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bWCr66fX_k4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Grills and Vacuum Work Areas — Air Duct Cleaning</video:title>
      <video:description>After all internal duct cleaning and any necessary encapsulation are complete, the cleaned HVAC grills are reinstalled into their original, marked positions. Following reinstallation, the areas around the vents and any other locations where tools or equipment were used are thoroughly vacuumed to remove any remaining dust or debris, ensuring a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bWCr66fX_k4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10909-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xIIgQlLJYh0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Grille and Inspect Ductwork — Air Duct Cleaning</video:title>
      <video:description>While the filter is drying, take the opportunity to clean the return air grille that remains in the ceiling. Use a vacuum cleaner (like a Dyson handheld vacuum shown in the video) to thoroughly clean off any accumulated dirt, dust, cobwebs, or other debris from the grille&apos;s surface and the visible interior of the return air box. For a final touch, you may want to use a feather duster to remove any remaining fine dust. Also, take a moment to inspect the return air box and the ductwork connected to it. Ensure they appear clean and undamaged. If you notice any damage, such as tears in the ductwork or significant rust, contact your air conditioning installer for professional assistance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xIIgQlLJYh0</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10909-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qBIU4FDdpBs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum Interior of Air Ducts — Air Duct Cleaning</video:title>
      <video:description>While the cleaned vents are drying, take the opportunity to clean the interior of the exposed air duct openings. Use a shop vacuum with a hose attachment to thoroughly vacuum out any accumulated dust, debris, and loose particles from inside the ducts. Insert the vacuum hose as far as possible into the openings of wall vents, floor vents, and any other accessible vents such as bathroom exhaust fans, ensuring you capture as much debris as possible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qBIU4FDdpBs</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10895-1</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SYT-Jc0jAvc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Thoroughly Pre-Vacuum the Carpet — Carpet Shampooing</video:title>
      <video:description>Before any wet cleaning, thoroughly vacuum the carpet multiple times to remove as much dry dirt, dust, and debris as possible. The speaker emphasizes that this is a critical step to prevent loose dirt from turning into muddy residue when wet solutions are applied. She demonstrates using both a Dyson and a Shark Navigator vacuum, showing the significant amount of dirt that can be collected even from seemingly clean carpets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SYT-Jc0jAvc</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10895-2</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1WBiBRhc6EI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Initial Vacuum — Carpet Shampooing</video:title>
      <video:description>After removing large debris, perform an initial vacuum pass over the entire carpeted area. Use a powerful vacuum cleaner, such as a shop vac, with a crevice tool or general carpet nozzle to pick up smaller, loose dirt, dust, and particles. This step clears the surface layer of contamination.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1WBiBRhc6EI</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10895-3</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GsY2NrTGluk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Vacuuming — Carpet Shampooing</video:title>
      <video:description>Begin by thoroughly vacuuming the car&apos;s floor mats and carpeted areas. The goal is to remove all loose debris and larger particles that can be easily picked up by the vacuum. Do not spend excessive time trying to remove deeply embedded dirt at this stage, as the subsequent steps will address that. The video demonstrates vacuuming one side of the car&apos;s rear floor to allow for a comparison of the before and after results.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GsY2NrTGluk</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10896-1</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lMA6tC0hJfk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-treat Stubborn Stains — Carpet Shampooing</video:title>
      <video:description>Before starting the main cleaning, inspect the carpet for any particularly stubborn or visible stains. Apply a suitable pre-treatment solution, such as Bissell Professional Pet Stain &amp; Odor remover, directly to these &apos;trouble spots&apos;. Allow the pre-treatment to sit for the recommended time (check product instructions) to help break down the stains, which will make them easier for the carpet cleaner to remove during the hot water extraction process. This step is crucial for achieving the best possible cleaning results on heavily soiled areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lMA6tC0hJfk</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10896-2</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lbf9ZCLay5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Carpet Cleaning Solution — Carpet Shampooing</video:title>
      <video:description>After vacuuming, apply a generous and even layer of dedicated carpet cleaning solution directly onto the floor mat. The solution should lightly saturate the carpet fibers, ensuring full coverage of any stained areas. The video shows the solution being applied via a spray bottle, but a pump sprayer can also be used for larger areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lbf9ZCLay5s</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10896-3</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GsY2NrTGluk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Carpet Cleaners and Light Scrub — Carpet Shampooing</video:title>
      <video:description>Identify and spray heavily stained areas with an enzyme cleaner, such as P&amp;S Enzyme Cleaner, especially for organic stains like milk or sweet tea. Allow it to dwell to break down the organic material. Then, follow up by spraying a general carpet cleaner, like P&amp;S Carpet Bomber, over the entire carpet area, including the enzyme-treated spots. Lightly mist the carpet without oversaturating it. For less dirty or dry areas and edges, lightly spray a microfiber towel with the carpet cleaner and gently rub to clean without excessive effort, as these areas often have floor mats covering them and require less aggressive cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GsY2NrTGluk</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10897-1</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WLbs-Af8vzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix the Solution by Shaking — Carpet Shampooing</video:title>
      <video:description>Once all ingredients have been added to the container, securely screw on the lid. Then, shake the container vigorously for several seconds. This action ensures that all the powdered ingredients are fully dissolved and thoroughly mixed with the liquid components, creating a uniform and effective carpet cleaning solution ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WLbs-Af8vzA</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10897-2</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SYT-Jc0jAvc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Review Important Tips for Carpet Cleaning — Carpet Shampooing</video:title>
      <video:description>To summarize the key learnings for effective DIY carpet refreshing: always vacuum the carpet thoroughly multiple times before any wet cleaning to remove loose dirt, as this is crucial for preventing muddy residue. Ensure you use hot water in your cleaning solution, as heat significantly enhances the cleaning power of both homemade and commercial solutions. To save money, consider making your own solutions with hot water and either white vinegar (for general cleaning) or OxiClean powder (for tough stains). Remember to exercise caution when using OxiClean, especially on colored carpets, as strong concentrations may lead to color loss. By following these essential tips, you can achieve professional-level carpet cleanliness and save on costs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SYT-Jc0jAvc</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10897-3</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SYT-Jc0jAvc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare OxiClean &amp; Hot Water Solution — Carpet Shampooing</video:title>
      <video:description>For carpets with visible and stubborn stains, a more powerful solution can be prepared using OxiClean Versatile Stain Remover powder and hot water. Add about one-quarter of the provided OxiClean scoop into the carpet cleaner&apos;s solution reservoir. Then, fill the reservoir with hot water and shake it thoroughly to ensure the powder dissolves completely. This solution is particularly effective for tackling difficult stains, but a cautionary note is given that higher concentrations of OxiClean can potentially lead to color loss on some carpets, so use with discretion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SYT-Jc0jAvc</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10898-1</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g8oi99gKkfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wash Carpet Areas — Carpet Shampooing</video:title>
      <video:description>Begin cleaning by setting the machine to the &quot;wash&quot; cycle. Pull the trigger on the handle while pushing the machine forward and backward over the target area (e.g., high-traffic areas in a bedroom or hallway). This action dispenses both water and cleaning solution onto the carpet. After a few passes, release the trigger and make one or two dry passes to extract the dispensed liquid from the carpet. This ensures the cleaning solution isn&apos;t left in the carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g8oi99gKkfI</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10898-2</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SYT-Jc0jAvc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Carpet with Proper Technique — Carpet Shampooing</video:title>
      <video:description>When actively cleaning the carpet, use a slow and deliberate technique. Make a long, slow forward pass, simultaneously releasing the chosen cleaning solution (vinegar or OxiClean mixture) onto the carpet. This allows the solution sufficient time to penetrate the carpet fibers and begin to break down embedded dirt and stains. After the solution has been applied, let it dwell on the carpet for several seconds, or even up to a minute, to maximize its working time. Then, make a slow backward pass, allowing the carpet cleaner to effectively suction up the dirty solution and any dislodged grime. For very dirty carpets, this entire process may need to be repeated multiple times until the water extracted into the dirty water tank appears visibly cleaner, indicating thorough cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SYT-Jc0jAvc</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10898-3</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lMA6tC0hJfk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Operate the Carpet Cleaner — Carpet Shampooing</video:title>
      <video:description>Position the carpet cleaning machine in a corner of the room, facing the wall. Engage the handle release to lower the handle into an operating position. Turn on the main power switch, typically located at the back of the machine. To activate the cleaning solution and scrubbing brushes, pull the red trigger on the handle. While holding the trigger, slowly pull the machine backward in a straight line towards you. The clear spinning wheel (flow indicator) will confirm that solution is being applied. Overlap each pass slightly to ensure comprehensive coverage. Once you complete a pass, release the trigger, reposition the machine, and repeat the process. Continue this method across the entire carpeted area. The clean water tank will need frequent refilling, and the dirty water tank will need to be emptied as it fills.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lMA6tC0hJfk</video:player_loc>
      <video:duration>160</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10899-1</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/x1Un9fApPsI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extract Cleaning Solution and Dirt — Carpet Shampooing</video:title>
      <video:description>Use a heated carpet extractor to thoroughly rinse and remove the cleaning solution, dirt, and excess moisture from the carpet. Make sure to perform multiple, slow passes over each section of the carpet. The presenter uses a Mighty Light 807 heated carpet extractor, which further aids in the cleaning process by applying heat during extraction. It is important to continue extracting until no more dirty water is being pulled up, and only clean water and minimal suds are visible. Pay close attention to areas that were previously covered by floor mats, as these will likely show a significant difference in color due to prolonged exposure to elements and wear. Communicate these potential permanent discolorations to the customer beforehand to manage expectations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/x1Un9fApPsI</video:player_loc>
      <video:duration>584</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10899-2</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g8oi99gKkfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Extract Carpet Thoroughly — Carpet Shampooing</video:title>
      <video:description>After the wash cycle, switch the knob on the clean water reservoir to the &quot;rinse&quot; cycle. Pull the trigger and perform one or two passes forward and backward over the same area. This dispenses clean water without cleaning solution, helping to rinse the carpet. Next, release the trigger and slowly move the machine over the carpet to extract as much liquid as possible. It is crucial to go very slowly during the extraction passes to maximize liquid removal. The carpet should feel damp, not soaking wet, once finished. After cleaning, allow the carpet to dry completely, possibly using a box fan to speed up the process. Avoid stepping on the wet carpet to prevent re-soiling with dirt from feet or shoes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g8oi99gKkfI</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10899-3</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wtdEei2RhK0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Rinse and Water Extraction — Carpet Shampooing</video:title>
      <video:description>Thoroughly rinse the entire carpet surface with clean water from a hose, making sure to flush out any remaining cleaning solution and embedded dirt. Immediately follow with the heavy-duty squeegee tool to extract as much rinse water as possible, promoting faster drying and leaving the carpet fibers in a clean, restored state.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wtdEei2RhK0</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10900-1</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lMA6tC0hJfk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow for Proper Drying — Carpet Shampooing</video:title>
      <video:description>Once the carpet cleaning is complete, the carpet will be damp. It is crucial to allow sufficient drying time before moving furniture back into the room. Ideally, let the carpet air dry for several hours, or even overnight, to prevent mildew and damage. To speed up the drying process, you can use a box fan or other circulating fans to blow air across the cleaned area. Ensure the carpet is completely dry to the touch before placing any furniture back, or place plastic or foil under furniture legs to prevent moisture transfer and potential stains.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lMA6tC0hJfk</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10900-2</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Axi7w0Oinxw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Finish — Carpet Shampooing</video:title>
      <video:description>After applying the dye, allow the carpet to dry completely. This process can take anywhere from 12 to 24 hours, or even longer, depending on the amount of dye applied, carpet thickness, room temperature, and humidity. Maximize airflow by opening windows, using fans, and running a dehumidifier if available. Avoid walking on the carpet during this drying period to prevent disturbing the dye and causing uneven results or footprints. Once the carpet is dry to the touch, carefully remove all painter&apos;s tape. Finally, vacuum the newly dyed carpet to fluff up the fibers and remove any dry residue, revealing the uniform and refreshed color.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Axi7w0Oinxw</video:player_loc>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10900-3</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-XdYB7FI8FE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Groom Carpet for Final Finish — Carpet Shampooing</video:title>
      <video:description>After completing the wet extraction, reel in all hoses (red and blue) back to the truck-mounted unit. Position a powerful air mover (fan) to accelerate the drying process of the cleaned carpet. For a final touch, use a carpet groom brush to gently rake the carpet pile in a uniform direction. This helps to stand the fibers up, remove any remaining wand marks, and leave the carpet looking fresh and even. The final appearance shows a significantly cleaner carpet with no visible stains.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-XdYB7FI8FE</video:player_loc>
      <video:duration>202</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10901-1</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/os3Op41kyEE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Vacuum Carpet — Carpet Shampooing</video:title>
      <video:description>Once you have scrubbed all the stained and dirty areas, allow the carpet to air dry completely. This step is essential; sufficient drying time prevents potential issues like mold, mildew, or a lingering damp smell. Depending on room ventilation and humidity levels, drying can take several hours. Once the carpet is thoroughly dry, use a vacuum cleaner to thoroughly vacuum the entire carpet. This final pass will remove all the dried baking soda, any remaining loosened dirt, and other residues, leaving your carpet deep-cleaned and refreshed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/os3Op41kyEE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10901-2</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1WBiBRhc6EI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Vacuuming — Carpet Shampooing</video:title>
      <video:description>Perform a final, thorough vacuum pass over the entire carpet area. This step is crucial to pick up all the dirt and debris that was loosened by the drill brush and blown out by the cleaning gun. Ensure you vacuum every section to achieve the cleanest possible finish, making sure to go over the areas where debris was concentrated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1WBiBRhc6EI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10901-3</loc>
    <lastmod>2026-10-07T14:17:09.306Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pw3S6GwnJ_4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Steam and Vacuum — Carpet Shampooing</video:title>
      <video:description>Perform one final steaming session, followed by a thorough vacuuming, to ensure all remaining loose dirt and any moisture from the cleaning solutions are removed. The presenter demonstrates the final result, highlighting that while some areas might appear lighter due to sun exposure over time (not staining), the embedded dirt and stains are effectively gone. The carpet is left significantly cleaner and refreshed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pw3S6GwnJ_4</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-10-07T14:17:09.306Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10891-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — measure stairs for carpet treads</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10891-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measure stairs for carpet treads</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10891-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure stairs for carpet treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10892-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs for carpet treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10892-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure stairs for carpet treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10892-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IOgUldDtg1c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet — measure stairs for carpet treads</video:title>
      <video:description>Measure the width of the stair tread from stringer to stringer (e.g., 36 1/8 inches) and the depth from the nose to the back riser (e.g., 13 inches). To allow for trimming and a snug fit, cut the carpet pieces slightly larger than these measurements (e.g., 37 inches wide by 14 inches deep). Use a utility knife and a straight edge to ensure clean, straight cuts. You will need one carpet piece per tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IOgUldDtg1c</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10894-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — measure stairs for carpet treads</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10894-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure stairs for carpet treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10894-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — measure stairs for carpet treads</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10893-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure stairs for carpet treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10893-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measure stairs for carpet treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10893-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — measure stairs for carpet treads</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10882-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ygmP3UBnLLU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose the Right Paint Sprayer — Painting</video:title>
      <video:description>Begin by selecting the appropriate paint sprayer for your project. The video highlights three common types: airless sprayers, suitable for large surfaces like interior walls and house siding; pneumatic sprayers, often used for commercial and industrial applications such as motor vehicle body parts; and HVLP (High Volume Low Pressure) sprayers, which are ideal for detailed applications requiring accuracy and a smooth finish, and are also a good choice for touch-up work. The presenter uses an HVLP sprayer for the demonstration.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ygmP3UBnLLU</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10882-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/crv2Det_ysg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Up Airless Paint Sprayer — Painting</video:title>
      <video:description>Although not fully detailed in the video, setting up the airless paint sprayer is a critical precursor. This involves connecting the suction tube to the paint container, attaching the high-pressure hose to the sprayer and spray gun, and ensuring the correct spray tip is installed. The sprayer then needs to be primed according to the manufacturer&apos;s instructions to remove air from the system and fill it with paint. Once primed, the sprayer is ready for application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/crv2Det_ysg</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10882-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1J7oOHXnoiM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Introduction and Initial Preparation — Painting</video:title>
      <video:description>Before starting, gather all necessary tools and materials. Understand that an airless sprayer is ideal for larger jobs like cabinets and fences, while an HVLP sprayer is better suited for smaller items such as tabletops or doors. Put on latex gloves to protect your hands.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1J7oOHXnoiM</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10883-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ze6cFS3SivY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint Preparation (Straining and Thinning) — Painting</video:title>
      <video:description>Strain the undercoat paint using a paint strainer to remove any lumps or debris that could clog the sprayer. Then, thin the paint by gradually adding small amounts of water and stirring. The ideal consistency is when the paint flows smoothly off a stirring stick and disappears into itself without clumping or being too watery. Regularly check the consistency and add water as needed. After filling the paint container, clean the threads to ensure a proper seal when reattaching it to the sprayer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ze6cFS3SivY</video:player_loc>
      <video:duration>142</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10883-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vOmB0yzJ0m8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Thin and Filter Paint — Painting</video:title>
      <video:description>Before loading paint into the spray gun, proper preparation is essential. Begin by thinning the paint to the correct viscosity if needed, following the paint manufacturer&apos;s recommendations. The video demonstrates adding paint thinner to the paint can and mixing it thoroughly with a stirring stick. Once the paint is thinned, carefully pour it through a paint filter funnel into the spray gun&apos;s cup. This straining process removes any potential clumps, debris, or dried paint particles that could clog the nozzle and disrupt the spray pattern, ensuring a smooth and even application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vOmB0yzJ0m8</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10883-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/46fZlH8Wbqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparing the Paint — Painting</video:title>
      <video:description>Thoroughly stir the paint to ensure consistent color and viscosity. Since this is new, water-based paint, straining it is not strictly necessary but is highly recommended for older paint or paint that may contain impurities to prevent clogs in the sprayer. If using old paint, strain it through a paint strainer bag to remove any clumps or debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/46fZlH8Wbqg</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10884-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H-IknxchgPE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime the Sprayer Unit (Purge Air from Machine) — Painting</video:title>
      <video:description>Take the intake tube, which is equipped with a filter screen at its end, and fully immerse it into your container of paint. Position the smaller prime return tube into a separate empty waste bucket or, for convenience, back into the same paint bucket if you prefer to conserve paint (though a waste bucket is generally recommended to prevent paint contamination during purging). With the intake tube in the paint and the prime return tube directed, turn the sprayer&apos;s On/Off switch to the ON position. Let the sprayer run in the prime setting. Continue running the sprayer until you observe a consistent flow of paint emerging from the prime return tube, free of any air bubbles. This process effectively purges all air from the internal pump and lines of the sprayer unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H-IknxchgPE</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10884-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/46fZlH8Wbqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Priming the Sprayer with Paint — Painting</video:title>
      <video:description>Move the sprayer&apos;s suction hose from the water bucket and place it directly into the stirred paint bucket. Ensure the drain hose is still positioned to return paint to the paint bucket (closed-loop priming). Turn the sprayer to the &apos;ON&apos; position and keep the prime/spray switch in the &apos;PRIME&apos; position. Allow the paint to circulate until it appears consistently in the drain hose, indicating the system is fully primed with paint. Once primed, turn off the sprayer and then move the prime/spray switch to the &apos;SPRAY&apos; position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/46fZlH8Wbqg</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10884-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eXM5Oz7jYj0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Load Paint into Sprayer — Painting</video:title>
      <video:description>Now, carefully remove the suction hose from the bucket of water or flushing solvent and place it into your pail of prepared paint, ensuring it reaches the bottom. Verify that the prime/spray lever on the unit is set to &apos;prime&apos;. Turn on the pump. You will observe water flowing from the priming hose initially. Keep the unit running until you see paint starting to exit consistently from the priming hose, indicating that the system is now filled with paint. Once paint is flowing, turn the spray lever to the &apos;spray&apos; position. The pump should run briefly to build pressure and then stop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eXM5Oz7jYj0</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10885-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/46fZlH8Wbqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Testing Spray Pattern and Adjusting Pressure — Painting</video:title>
      <video:description>Before spraying the house, test the spray gun on a scrap piece of cardboard or a discreet area. The creator first tests the horizontal spray pattern. If you observe a &apos;gap&apos; or &apos;tails&apos; in the spray pattern (where the paint is thin or uneven at the edges), it indicates that the pressure setting is too low. Adjust the pressure knob on the sprayer to a higher setting and retest until an even, consistent spray pattern is achieved. The creator adjusts the pressure until the spray is uniform without gaps, ensuring proper paint atomization.</video:description>
      <video:player_loc>https://www.youtube.com/embed/46fZlH8Wbqg</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10885-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ygmP3UBnLLU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Practice Spraying Techniques — Painting</video:title>
      <video:description>If this is your first time using a paint sprayer, it&apos;s highly recommended to practice until you are comfortable with its operation. Use a large piece of cardboard or another scrap surface for practice. Experiment with both vertical and horizontal spray movements to get a feel for the sprayer. Adjust the tip of the sprayer to achieve your desired horizontal or vertical spray pattern, depending on the surface you&apos;re painting. Remember that holding the sprayer closer to a surface will apply more paint and create a narrower spray pattern, while holding it farther away will result in a thinner coat and a wider spray pattern. To prevent paint build-up, always start moving the sprayer before pulling the trigger and continue moving it after releasing the trigger.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ygmP3UBnLLU</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10885-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/u9IF-FFjSkM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust Spray Pressure and Test Pattern — Painting</video:title>
      <video:description>Use scrap pieces of cardboard to test the spray pattern. Begin with the minimum spray pressure setting on your equipment. Gradually increase the pressure until a smooth and even spray pattern is achieved, free of &apos;fingers&apos; or &apos;tails&apos; (uneven finish at the edges). Optimal pressure will ensure an even distribution of material without overspray or uneven application. Using the lowest effective pressure possible helps prolong the life of your pump and spray tip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/u9IF-FFjSkM</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10886-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7nxuKJa2hf4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mask Off Areas for Overspray Protection — Painting</video:title>
      <video:description>Mask off all areas not intended for paint, such as walls, windows, and floors. Use masking paper with pre-attached tape for windows for efficiency. To speed up the first row of painter&apos;s tape application, use a 2-inch putty knife to firmly press the tape into corners and along edges, ensuring a clean and precise line. For furnished rooms, cover all furniture and flooring with drop cloths due to significant overspray.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7nxuKJa2hf4</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10886-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/61cjGAhSxlc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mask and Cover the Room — Painting</video:title>
      <video:description>After preparing the trim, protect the surrounding areas. Use lightweight plastic sheeting and masking tape to cover any walls and ceilings adjacent to the trim, preventing overspray. Securely tape the edges of the plastic sheeting to create a clean barrier. Lay down drop cloths over the entire floor area and any remaining furniture in the room to protect them from paint. Ensure all surfaces not meant to be painted are adequately covered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/61cjGAhSxlc</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10886-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/46fZlH8Wbqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Masking and Area Preparation — Painting</video:title>
      <video:description>Before painting, carefully mask off all areas that should not be painted. This includes windows, doors, trim, and any adjacent surfaces. Use painter&apos;s tape to secure plastic sheeting or masking paper around windows and doors, ensuring a tight seal to prevent overspray. The creator uses a ladder to reach higher areas, covering the window frames and the entire glass pane with plastic, and extending coverage to the porch ceiling and main entry door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/46fZlH8Wbqg</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10887-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r3P-gzYOco8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Paint with Proper Technique — Painting</video:title>
      <video:description>Now you are ready to apply paint. Take off the spray gun&apos;s safety lock. Hold the spray gun approximately 10 to 12 inches from the surface you intend to paint. The most crucial aspect of achieving a consistent and smooth finish is to move your entire arm consistently across the surface, maintaining an even distance. Avoid flicking or arcing your wrist, as this will lead to inconsistent paint coverage with thicker edges and thinner centers in your spray passes. Ensure each spray pass overlaps the previous one by about 50% to prevent streaking and ensure uniform coverage. Maintain a steady hand and arm movement throughout the painting process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r3P-gzYOco8</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10887-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3a-gOOhvub8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Paint with Proper Technique — Painting</video:title>
      <video:description>Apply paint using complete and full passes, holding the gun consistently 6 to 8 inches away from the surface. Initiate the spray just before reaching the target surface and release the trigger just after leaving the target surface. Overlap each spray pattern by 30% to 50% for even coverage. For optimal coverage, spray with the grain on the first pass and then spray across the grain on subsequent passes. It is always better to apply two thin coats rather than one thick coat to ensure a great finish and prevent drips or runs. If the target surface has openings, back them up with cardboard or plastic to prevent paint from going through.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3a-gOOhvub8</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10887-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NotMhXx4gPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Paint with Consistent Technique — Painting</video:title>
      <video:description>With the spray gun properly adjusted, begin applying paint to your surface. The key is to apply the paint in a consistent pattern, moving the gun at a steady speed and distance from the surface. Overlap each stroke by approximately 50% to ensure even coverage and avoid streaks or thin spots. Maintain a consistent distance from the surface being sprayed throughout the entire application process. This technique helps achieve a smooth, professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NotMhXx4gPY</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10888-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g7SReg-IH_o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply a Second Coat — Painting</video:title>
      <video:description>It is recommended to apply two coats of paint for the best coverage and durability. Always check the paint can for the manufacturer&apos;s recommended drying times between coats. It is critical to wait until the first coat is completely dry before adding the second coat to ensure proper adhesion and a smooth finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g7SReg-IH_o</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10888-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z-VDrJ8tAGY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Coat of Paint — Painting</video:title>
      <video:description>Once the first coat of paint is dry, apply a second coat following the same technique as the first. Work the paint in horizontally, ensuring thorough coverage and a smooth, even finish. This second coat will enhance the color, hide any streaks from the first coat, and provide better durability. Allow the second coat to dry completely before disturbing the area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z-VDrJ8tAGY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10888-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wp92TbOa2DQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Paint Coat — Painting</video:title>
      <video:description>After the first coat of paint has completely dried according to the manufacturer&apos;s instructions (which typically takes several hours), apply a second even coat. This additional coat is essential for achieving full coverage, enhanced durability, and a richer, more uniform finish. Ensure the second coat is applied as carefully and evenly as the first.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wp92TbOa2DQ</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10889-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N9elN6Xz7sc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Paint Sprayer — Painting</video:title>
      <video:description>For water-based paints, if a liner was used, simply remove and discard the liner (pouring any excess paint back into the paint can if desired). If no liner was used, clean the cup and suction tube with warm, soapy water. For oil-based paints, use mineral spirits to clean the cup and suction tube. Rinse all components thoroughly. Allow all parts to dry completely before reassembling the sprayer for storage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N9elN6Xz7sc</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10889-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RGt9ipl6VJQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Sprayer and Work Area — Painting</video:title>
      <video:description>After all painting is complete, immediately and thoroughly clean the airless paint sprayer. This is critical to prevent paint from drying inside the machine and causing clogs or damage. Begin by flushing the system with an appropriate cleaning solution – water for latex (water-based) paints or mineral spirits for oil-based paints – until the solution runs clear. Disassemble the spray tip, filters (in the gun and manifold), and the gun itself, cleaning each component separately with a brush and solution. Finally, remove all masking tape, plastic sheeting, and drop cloths, and dispose of them properly. Clean any incidental paint drips or splatters from unprotected areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RGt9ipl6VJQ</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10889-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fNTviUyKleU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Sprayer Components — Painting</video:title>
      <video:description>Thorough cleaning of the sprayer after each use is essential for its longevity and performance. Begin by unscrewing the reservoir from the paint attachment. If there&apos;s any remaining paint, pour it back into its original tin for later use. Fill the reservoir with water (for water-based paints) and allow the paint attachment to soak briefly. Then, carefully disassemble the paint attachment by removing the suction tube, unscrewing the nozzle ring, and detaching the air cap. The internal components, including the needle and O-ring, should be checked for paint residue. Rinse each part thoroughly under running water, ensuring all paint is removed from all surfaces, especially the intricate areas of the nozzle and suction tube. Continue rinsing until the water runs completely clear. The reservoir should also be scrubbed clean, as its smooth, machined interior makes cleaning easy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fNTviUyKleU</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10890-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DelLXXS9ppo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unmasking and Final Cleanup — Painting</video:title>
      <video:description>Once the paint has dried sufficiently according to the manufacturer&apos;s instructions, carefully remove all painter&apos;s tape, plastic sheeting, and drop cloths. Begin by gently pulling the tape at a 45-degree angle to minimize the risk of peeling off fresh paint or leaving adhesive residue. Collect all masking materials and dispose of them properly. Inspect the newly painted surfaces for any missed spots or areas needing minor touch-ups. Finally, clean the paint sprayer thoroughly according to its manual to ensure its longevity and readiness for future projects.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DelLXXS9ppo</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10890-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uu_DvXFlpgU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Masking and Clean Up — Painting</video:title>
      <video:description>Once the final coat of paint is dry to the touch, carefully remove all masking tape and paper. Peel the tape off slowly at a 45-degree angle to prevent tearing and lifting of the freshly applied paint. If any hardware was removed, reattach it. Thoroughly clean the paint sprayer according to the manufacturer&apos;s instructions. This usually involves flushing it with water (for latex paint) or appropriate cleaner/thinner (for oil-based paint) until all paint residue is removed. Clean any tools used during preparation. Dispose of masking materials and paint waste responsibly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uu_DvXFlpgU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10890-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EuE3uhkcKSw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up and Demask — Painting</video:title>
      <video:description>Once the final coat of paint has been applied and is dry to the touch, carefully remove all painter&apos;s tape. It&apos;s often best to remove the tape when the paint is still slightly wet (but not tacky) to prevent peeling, or after it&apos;s completely cured. If the paint is completely dry, you can score the edge of the tape with a utility knife to ensure a clean break. Roll up the drop cloths or plastic sheeting, being careful to contain any dried paint flakes. Clean the paint sprayer immediately after use according to the manufacturer&apos;s instructions. This usually involves flushing it with water (for latex paint) or appropriate cleaning solution (for oil-based paint) until all paint residue is gone.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EuE3uhkcKSw</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10874-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7d_a7wJekAs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — Dryer Repair</video:title>
      <video:description>Before beginning any repair on your dryer, ensure it is completely disconnected from its power source. If your dryer has a power cord, simply unplug it from the wall socket. If the dryer is hardwired, locate the circuit breaker in your home&apos;s electrical panel and switch it off to cut power to the appliance. Confirm that the power is off before proceeding to the next steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7d_a7wJekAs</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10874-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I5WEzmClRjE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — Dryer Repair</video:title>
      <video:description>Before beginning any work on the dryer, ensure that the unit is safely disconnected from its power source. This can be done by either unplugging the dryer from the wall outlet or by turning off the corresponding circuit breaker in your home&apos;s electrical panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I5WEzmClRjE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10874-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/whFYs7Tg9Uw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — Dryer Repair</video:title>
      <video:description>Before beginning any work on the dryer, it is crucial to disconnect it from its power source. If your dryer has a power cord, simply unplug it from the wall socket. If it is hardwired, locate the circuit breaker for the dryer in your home&apos;s electrical panel and switch it off. This prevents electric shock during the repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/whFYs7Tg9Uw</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10875-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zpNFEHxTxNU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Top Panel — Dryer Repair</video:title>
      <video:description>To access the internal components, you first need to remove the top panel of the dryer. Locate the two screws on the top side of the dryer, which are usually covered by small plastic caps. Use a flat-blade screwdriver to gently pry off these plastic caps, revealing the screws underneath. Once the caps are removed, unscrew the visible screws. Then, move to the back of the dryer and locate any additional screws securing the top panel. Remove these screws as well. With all screws removed, carefully lift the top panel off the dryer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zpNFEHxTxNU</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10875-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Edaqxh2AmCg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open Dryer Top and Remove Front Panel — Dryer Repair</video:title>
      <video:description>To gain full internal access, the dryer&apos;s front panel must be opened. Insert a putty knife into the small gaps on the sides of the dryer&apos;s top panel, near the front. Press down on the clips on each side to release the top. This allows the entire top of the dryer to hinge backward, exposing the drum. The front panel, or bulkhead, is held in place by screws at the very bottom corners and by small metal catches on the bottom edge of the metal housing. Carefully remove the screws and unclip the moisture sensor harness located in the lower right corner before fully removing the front door by rolling it forward and up.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Edaqxh2AmCg</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10875-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BO8IBoY-wlU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Top Panel — Dryer Repair</video:title>
      <video:description>To access the dryer&apos;s internal components, start by removing the top panel. Locate the two 1/4-inch screws on the back of the dryer that secure the top panel. Use a nut driver to unscrew and remove these screws. Once the screws are out, slide the top panel slightly backward, then lift it completely off the machine and set it aside in a safe place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BO8IBoY-wlU</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10876-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S9KaJeV_bMQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Blown Thermal Fuse — Dryer Repair</video:title>
      <video:description>Begin by checking the thermal fuse. This is a crucial safety device designed to protect your dryer from overheating. It&apos;s typically located on the blower housing, though some dryer models might have an additional fuse on the heating element. If the dryer overheats, this fuse will blow, cutting off power to the heating element. Use a multimeter set to continuity mode to test the fuse. Place the probes on the fuse&apos;s terminals. If the multimeter indicates no continuous electrical path (e.g., an analog meter doesn&apos;t move or a digital meter shows &apos;OL&apos; or &apos;1&apos;), the fuse has blown and will need to be replaced. Remember that a common cause for a blown thermal fuse is a clogged dryer venting system, which restricts airflow and leads to overheating. Regular cleaning of your dryer vent is recommended to prevent this issue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S9KaJeV_bMQ</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10876-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3DcMhOMZlj4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Heating Circuit Components — Dryer Repair</video:title>
      <video:description>With the heating components exposed, use a multi-meter set to continuity mode to test each part of the heating circuit. For accurate readings, disconnect at least one wire from each component before testing. Test the thermal fuse, the heating element, the cycling thermostat, and the high-limit thermostat. All components in this specific dryer were found to have good continuity, indicating they are functional and not the cause of the drying issue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3DcMhOMZlj4</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10876-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S9KaJeV_bMQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Defective Heating Element — Dryer Repair</video:title>
      <video:description>Next, inspect and test the heating element. The heating element is responsible for warming the air before it enters the dryer drum. If this component is burned out or otherwise defective, the dryer will not produce heat. To test it, use a multimeter set to continuity mode. Place the probes on the terminals of the heating element. If the multimeter shows no continuity, indicating an open circuit, then the heating element is defective and will need to be replaced to restore heating functionality to your dryer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S9KaJeV_bMQ</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10877-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lTqbw2HegBA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Broken Dryer Belt — Dryer Repair</video:title>
      <video:description>First, verify that the dryer&apos;s drive belt is broken. With the dryer door open, press and hold the door safety switch (located on the door frame) and press the &apos;Push to Start&apos; button on the control panel. If you can hear the motor running but the drum is not spinning, it indicates a broken belt. Additionally, try spinning the drum by hand; if it turns very easily with no resistance, this also confirms a broken belt.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lTqbw2HegBA</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10877-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Oa_xqgTdeCM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Troubleshoot Drum Not Turning — Dryer Repair</video:title>
      <video:description>If the dryer powers on but the drum fails to rotate during any cycle, the most probable cause is a broken or frayed drive belt. Inspect the drive belt; if it&apos;s damaged, it will need to be replaced. This is a common DIY repair that can be done with mechanical skills. Accessing the belt usually involves opening the dryer casing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Oa_xqgTdeCM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10877-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kHOuRwzOjCU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Non-Turning Drum — Dryer Repair</video:title>
      <video:description>If the dryer&apos;s drum does not turn during any cycle, the most probable cause is a broken or frayed drive belt. This component is typically accessible for replacement, which can often be done by a mechanically skilled individual without calling for professional service.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kHOuRwzOjCU</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10878-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TnXlJsVIoYw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Unusual Dryer Noises — Dryer Repair</video:title>
      <video:description>Begin by listening carefully to your clothes dryer while it is operating. Pay close attention to any abnormal rumbling or thumping sounds that may be emanating from the appliance. These noises are the primary indicator of a potential issue with internal components. The sound might change in pitch or intensity depending on the dryer&apos;s cycle or the size of the load inside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TnXlJsVIoYw</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10878-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QydJ25pGA2w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Internal Components for Noise — Dryer Repair</video:title>
      <video:description>With the dryer largely disassembled, you now have full access to inspect various internal components for potential noise culprits. First, check the idler pulley for any damage, flat spots, or grinding noises when rotated. The entire idler assembly (metal arm and pulley wheel) is typically replaced as one purchasable piece. Next, inspect the blower housing and its fins by manually rotating it slowly and rapidly. Look for smooth spinning, intact fins, or any binding that could cause noise. Some blower housings are one-piece units, requiring full replacement if damaged. Finally, examine the motor by spinning its pulley to listen for persistent noise, which could indicate worn motor bearings needing motor replacement. If any loose foreign objects are found in the blower housing, try to vacuum them out from the rear if inaccessible from the front.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QydJ25pGA2w</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10878-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TnXlJsVIoYw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Drum Rollers for Wear — Dryer Repair</video:title>
      <video:description>After identifying a rumbling noise, turn off and unplug the dryer from its power source to ensure safety. You will need to access the interior of the dryer to inspect the drum rollers. These rollers are typically located at the front or rear of the dryer&apos;s drum assembly, often requiring the removal of the front panel or lifting the drum. Visually inspect each drum roller for signs of wear and tear, such as flattened spots, cracks, excessive looseness, or deterioration of the rubber/plastic material. The video shows an example of a worn drum roller, indicating these are a common source of noise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TnXlJsVIoYw</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10879-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hq_D2YEyXyQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Defective Heating Element — Dryer Repair</video:title>
      <video:description>Unplug the dryer from the power source. Disconnect the moisture sensor plug. Remove the three screws that secure the blower housing cover and carefully remove the cover. Unscrew the four screws that hold the front bulkhead in place. Lift the front bulkhead up and out of its slots and set it aside. Gently release the drum belt and remove the drum from the dryer. (This is an excellent opportunity to clean out lint from the dryer base and blower housing). Locate the heater housing on the right side of the dryer. Remove the screws on both sides of the heater housing that secure the cover. Lift off the top portion of the heater housing; it is not necessary to disconnect the wires to the high limit or thermostat at this point. Using needle-nose pliers, bend the tabs on the heating element terminals and push them through towards the inside of the housing to release the old element. Remove the old heating element. Insert the new heating element into place, push its terminals through, and bend the tabs back with needle-nose pliers to secure it. Attach the two wires to the new heating element terminals.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hq_D2YEyXyQ</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10879-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I5WEzmClRjE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Heating Element Assembly and Sensors — Dryer Repair</video:title>
      <video:description>Now, place the assembled heating element canister back into the dryer, securing it with the two main screws (one top, one front) as it was originally. The canister&apos;s thin metal might require slight bending to align with the screw holes. Once the canister is in place, install the new high-limit thermostat and thermostat onto the unit, matching the wiring properly as you documented earlier. Only two screws hold these sensors in place. For the thermistor, which is located behind the blower housing next to the motor and idler pulley, you&apos;ll similarly replace it by unscrewing the old one and installing the new one, which is typically held by one screw. Test the old thermistor with a multimeter for a dynamic resistance range (approx. 12k ohms at 70°F/21°C, varying with temperature). If it&apos;s outside the expected range, replace it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I5WEzmClRjE</video:player_loc>
      <video:duration>125</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10879-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3FZBKcbj-eg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Faulty Thermal Fuse and Thermostat — Dryer Repair</video:title>
      <video:description>If the thermal fuse (and potentially the thermostat) tests faulty, carefully remove the old components. Install the new thermal fuse and thermostat in their respective positions, ensuring all electrical connections are secure and correctly reattached. It&apos;s crucial to replace both components as a set, even if only one tests as blown, to prevent recurring issues.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3FZBKcbj-eg</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10880-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Edaqxh2AmCg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Dryer — Dryer Repair</video:title>
      <video:description>To reassemble the dryer, follow the disassembly steps in reverse order. Begin by installing the drum back onto the rear rollers and reattaching the drive belt to the idler pulley, ensuring it&apos;s properly looped. Then, install the front bulkhead panel, making sure to reconnect the moisture sensor harness and secure all screws. Next, close the dryer&apos;s top panel. Finally, reattach the console, securing it with the two screws on the back. Once fully reassembled, plug the dryer back in or turn on the circuit breaker to test if it&apos;s now heating properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Edaqxh2AmCg</video:player_loc>
      <video:duration>1200</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10880-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3FZBKcbj-eg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test Dryer — Dryer Repair</video:title>
      <video:description>After replacing any faulty components and thoroughly cleaning the dryer, carefully reassemble the dryer&apos;s panels, ensuring all wires are reconnected correctly according to the pictures taken earlier. Once fully reassembled, restore power to the dryer at the circuit breaker. Perform a test cycle to ensure the dryer is now heating and operating correctly. Observe the drying process and confirm that clothes are drying efficiently.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3FZBKcbj-eg</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10880-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ajrZTmZWFv8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Dryer Components — Dryer Repair</video:title>
      <video:description>Once testing is complete (and replacement if necessary), begin reassembling the dryer in reverse order of disassembly. Start by reinstalling the dryer drum, then reattach the drive belt to the idler pulley. Next, reinstall the front door panel, ensuring the door springs are connected correctly. Then, install the blower housing vent and the bottom access panel. Finally, reinstall the top panel, making sure it slides into place, and secure the control console by replacing the two console screws using a Phillips screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ajrZTmZWFv8</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10881-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3FZBKcbj-eg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test Dryer — Dryer Repair</video:title>
      <video:description>After replacing any faulty components and thoroughly cleaning the dryer, carefully reassemble the dryer&apos;s panels, ensuring all wires are reconnected correctly according to the pictures taken earlier. Once fully reassembled, restore power to the dryer at the circuit breaker. Perform a test cycle to ensure the dryer is now heating and operating correctly. Observe the drying process and confirm that clothes are drying efficiently.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3FZBKcbj-eg</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10881-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wsl2Y7UbNGo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Test and Reassembly — Dryer Repair</video:title>
      <video:description>Once all components are reassembled and wired correctly, plug the dryer back into the wall outlet. Select a drying cycle and press the start button. Listen for the dryer to start and after a few minutes, carefully open the dryer door to check for heat inside. If the dryer runs and produces heat, the repair is successful. Remember to fully reassemble all panels and covers before regular use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wsl2Y7UbNGo</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10881-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OpQMgdrL3Tg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Dryer Functionality — Dryer Repair</video:title>
      <video:description>After all panels and components are securely reassembled, plug the dryer back into the electrical outlet. Power on the dryer and select a cycle, such as &apos;Air Dry,&apos; and press start. Listen for smooth operation of the drum. After about a minute, check to ensure that the heating elements are working and the dryer is producing heat. If everything functions correctly, the drive belt replacement was successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OpQMgdrL3Tg</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10873-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — installing stair treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10873-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10873-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — installing stair treads</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10872-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — installing stair treads</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10872-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10872-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — installing stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10870-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — installing carpet stair treads</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10870-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10870-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — installing carpet stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10871-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10871-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — installing carpet stair treads</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10871-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place the First Stair Tread — installing carpet stair treads</video:title>
      <video:description>Begin the installation by taking one carpet stair tread and carefully positioning it on the desired step. Ensure the tread is centered, straight, and leaves an even border of exposed wood on the sides and front of the stair. Once properly aligned, firmly press down across the entire surface of the tread, especially focusing on the edges and corners, to activate the non-slip backing and securely bond it to the clean wooden stair. The video shows a foot pressing on the tread and a hand lifting it slightly to confirm its non-slip nature.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10866-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — how to measure stairs for custom stair treads, including diagonal steps</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10866-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — how to measure stairs for custom stair treads, including diagonal steps</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10866-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9vp18TbNaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — how to measure stairs for custom stair treads, including diagonal steps</video:title>
      <video:description>Before installing the carpet treads, thoroughly clean the staircase to ensure there is no dust, dirt, or debris on the wooden treads and risers. This can be done with a vacuum cleaner and a damp cloth. Next, inspect the stairs for any loose elements or imperfections that might affect the tread installation. Then, measure the width and depth of each stair tread. It&apos;s crucial to measure each step individually as slight variations can occur. Decide on the overhang length for the carpet tread over the nose of the step, if any, and mark this on the stairs or note it down for cutting. Also, determine the desired spacing between the edge of the stair and the carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9vp18TbNaI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10868-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — how to measure stairs for custom stair treads, including diagonal steps </video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10868-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — how to measure stairs for custom stair treads, including diagonal</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10868-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — how to measure stairs for custom stair treads, including diagonal ste</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10869-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — how to measure stairs for custom stair treads, including diagonal</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10869-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Cut Your Treads — how to measure stairs for custom stair treads, including diagonal steps a</video:title>
      <video:description>With the nosing removed, prepare the replacement treads for installation. Begin by measuring each tread individually using a tape measure, as stairway widths can vary from one step to the next. Mark the length that needs to be cut off using a sharpie or pencil. If the tread is a double return tread, you will not need to make any further cuts as it has been manufactured to your provided dimensions. As a pro tip, use a piece of scrap wood to push the tread out at the return area. This allows you to properly scribe the skirt before cutting, which will help give you an exact fit and cut for your tread. Use a miter saw to make the necessary cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10869-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — how to measure stairs for custom stair treads, inclu</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10867-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — how to measure stairs for custom stair treads, including diagonal steps </video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10867-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — how to measure stairs for custom stair treads, including diagonal</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10867-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — how to measure stairs for custom stair treads, including diagonal steps and v</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10860-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TAnR3KLocsE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Grind the First Stump — Stump Grinding</video:title>
      <video:description>With the stump grinder running, position it over the tree stump. Slowly lower the cutting head onto the stump and begin moving the machine back and forth across the stump. The rotating cutting head will chip away at the wood, reducing its size and creating wood chips and dust. Continue grinding until the stump is below ground level. The first stump in the video was initially burned with charcoal to reduce its height before grinding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TAnR3KLocsE</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10860-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C6MTlbWR8HA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Stump Grinding — Stump Grinding</video:title>
      <video:description>Once the tree trunk has been mostly removed, a powerful &apos;Bandit Stump Grinder Model 2100&apos; is brought in to grind the remaining tree stump down below ground level. The machine uses a rotating cutting wheel to chip away at the stump and roots, turning them into sawdust and wood chips. This step completely removes the visible part of the tree and its major root ball, leaving the area clear for future construction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C6MTlbWR8HA</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10860-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RHiSMBlDcGA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rent a Stump Grinder — Stump Grinding</video:title>
      <video:description>For a faster method of stump removal, consider renting a stump grinder from a local home improvement or equipment rental store. These machines use a powerful rotating blade to chip away at the stump.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RHiSMBlDcGA</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10861-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZU8x6WOlUlg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Stump and Prepare Area — Stump Grinding</video:title>
      <video:description>Begin by observing the tree stump that needs to be removed. Ensure the area immediately surrounding the stump is clear of any large debris, rocks, or other obstacles that could interfere with the stump grinder or be projected during operation. The video shows a stump that has been recently cut, sitting slightly above ground level. Before operating any machinery, it is crucial to don appropriate personal protective equipment including safety glasses or goggles, hearing protection, and gloves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZU8x6WOlUlg</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10861-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YlbxU-22pQA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Debris from Around Stumps — Stump Grinding</video:title>
      <video:description>After cutting the stumps, it&apos;s crucial to clear the area around them. The presenter demonstrates scraping away leaves, small branches, and digging around the stump to expose the base and check for any hidden rocks or buried debris, such as an old piece of wood. This cleaning step prevents foreign objects from being thrown by the grinder or damaging its cutting teeth, which are expensive to replace. Creating a clean working area also allows for better visibility during grinding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YlbxU-22pQA</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10861-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e0bp43WxwqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Grind Additional Stumps — Stump Grinding</video:title>
      <video:description>If there are multiple stumps to remove, repeat the entire sequence of steps for each one: clearing the surrounding area, meticulously checking for metal objects with a metal detector, setting up safety screens, operating the Vermeer SC30TX stump grinder to cut the stump 5-6 inches below grade, and then cleaning up the resulting wood chips and refilling with topsoil. This systematic approach ensures all stumps are removed efficiently and the property is thoroughly restored.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e0bp43WxwqU</video:player_loc>
      <video:duration>316</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10862-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wfyvTsw1gXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wear Appropriate PPE — Stump Grinding</video:title>
      <video:description>Before beginning any grinding task, don all necessary personal protective equipment (PPE). This includes heavy-duty work gloves to protect hands from heat, sharp edges, and vibrations; ear defenders or earplugs to prevent hearing damage from loud noise; clear safety glasses (or a full face shield) to shield eyes from sparks and debris; robust safety boots to protect feet from falling objects or sparks; and flame-retardant overalls to protect clothing and skin from burns and direct contact with sparks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wfyvTsw1gXw</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10862-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AnBN00vnS6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wear PPE and Connect Vacuum — Stump Grinding</video:title>
      <video:description>Prioritize safety by wearing appropriate personal protective equipment, which typically includes safety gloves, eye protection (safety glasses), a dust mask or respirator (e.g., 3M 2097 P100), and hearing protection. Connect a vacuum to the dust containment shroud on your angle grinder to effectively eliminate airborne dust during operation, ensuring a cleaner and safer working environment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AnBN00vnS6E</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10862-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KYhGC7WauVs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Don Personal Protective Equipment — Stump Grinding</video:title>
      <video:description>Before operating the angle grinder, always don the necessary personal protective equipment. This includes heavy-duty work gloves (such as leather gloves) to protect your hands from vibrations, sharp debris, and potential contact with the spinning brush. Crucially, wear safety glasses to shield your eyes from flying metal particles, rust, and wire fragments that can be ejected during operation. The video demonstrates putting on the gloves and then the safety glasses.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KYhGC7WauVs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10863-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RHiSMBlDcGA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Grind the Stump — Stump Grinding</video:title>
      <video:description>Position the rented stump grinder over the tree stump. Slowly and carefully operate the machine to grind away the stump. Continue grinding until the stump is about 6 to 8 inches (15 to 20 cm) below the soil surface, ensuring that all visible parts of the stump are gone.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RHiSMBlDcGA</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10863-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e0bp43WxwqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Operate Stump Grinder — Stump Grinding</video:title>
      <video:description>Don your personal protective equipment (PPE), including an orange safety helmet with integrated hearing protection and a face shield. Approach the Vermeer SC30TX stump grinder, which is a powerful, tracked machine designed for this task. It features an articulating cutting head equipped with robust carbide teeth. Using the machine&apos;s joysticks, carefully maneuver the cutting wheel to begin grinding the stump. Employ a controlled sweeping motion across the stump&apos;s surface, gradually lowering the cutting head with each pass. The goal is to grind the entire stump down to approximately 5-6 inches below the surrounding ground grade. The tracks of the machine allow it to move across the lawn with minimal disturbance compared to wheeled models.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e0bp43WxwqU</video:player_loc>
      <video:duration>130</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10863-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TAnR3KLocsE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Grind the First Stump — Stump Grinding</video:title>
      <video:description>With the stump grinder running, position it over the tree stump. Slowly lower the cutting head onto the stump and begin moving the machine back and forth across the stump. The rotating cutting head will chip away at the wood, reducing its size and creating wood chips and dust. Continue grinding until the stump is below ground level. The first stump in the video was initially burned with charcoal to reduce its height before grinding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TAnR3KLocsE</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10864-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e0bp43WxwqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up Grinding Debris — Stump Grinding</video:title>
      <video:description>After the stump has been completely ground down, it&apos;s time to clean up the resulting wood chips and soil. Use a rake to gather the majority of the wood chips into manageable piles. These piles can then be scooped into a wheelbarrow using a shovel and transported away from the work area. The collected wood chips can be repurposed as mulch for garden beds or disposed of. For any remaining fine debris and dust scattered across the lawn, use a leaf blower to thoroughly clear the area, leaving a clean and tidy surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e0bp43WxwqU</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10864-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NEgZWI3LE2w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Cleanup and Site Restoration — Stump Grinding</video:title>
      <video:description>After all stumps and problematic roots have been ground down, the area will be covered with a significant mound of wood chips mixed with some soil. Use shovels and rakes to gather and separate the wood chips from the surrounding soil. The video shows a huge mound of wood chips that will need to be picked up and hauled away. Once the chips are removed, the remaining hole can be filled with fresh soil and compacted to prepare the ground for future landscaping, such as planting new grass or garden beds. The goal is to restore the area to a usable and aesthetically pleasing state.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NEgZWI3LE2w</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10864-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YoaG7j8DogI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Bulk Debris and Rough Level — Stump Grinding</video:title>
      <video:description>Once the majority of the wood chips and soil have been raked into a pile, use a shovel to scoop the material into a garden utility cart or wheelbarrow. This allows for easy transportation of the debris. After removing the bulk of the material, use the garden rake again to further level the ground. The narrator suggests that the collected debris, which is a mix of wood chips and organic soil, can be repurposed to fill low spots in a backyard or added to a compost pile, highlighting its value as a natural soil amendment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YoaG7j8DogI</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10865-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RHiSMBlDcGA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill the Hole After Grinding — Stump Grinding</video:title>
      <video:description>Once the stump has been ground down, fill the resulting hole with loam or a mixture of soil and compost. This will create a level surface and prepare the area for new grass or plants.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RHiSMBlDcGA</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10865-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e0bp43WxwqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Refill and Level the Ground with Topsoil — Stump Grinding</video:title>
      <video:description>After clearing the wood chips, the area will have a depression where the stump once stood. Use a tractor with a front-end loader to bring in fresh topsoil. Carefully deposit the topsoil directly into the hole. Once the topsoil is in place, use rakes and shovels to spread it evenly and level the ground surface. Ensure the filled area matches the surrounding grade, accounting for any potential settling. This prepares the spot for new grass seed or other landscaping elements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e0bp43WxwqU</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10865-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/REWiLa3XRtw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill the Hole — Stump Grinding</video:title>
      <video:description>After removing the cut section of the stump, use the shovel to backfill the hole with the soil that was previously dug out. Level the area to match the surrounding ground. Over time, the remaining wood underground will rot and decompose, which may cause the ground to sink slightly. If this happens, you can simply add more soil to level it again.</video:description>
      <video:player_loc>https://www.youtube.com/embed/REWiLa3XRtw</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10854-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2RsnLbqcEVU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Supply — Toilet Flapper Replacement</video:title>
      <video:description>Locate the water shut-off valve, typically on the wall behind the toilet. Turn the valve handle clockwise all the way to stop the flow of water to the toilet tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2RsnLbqcEVU</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10854-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lQQ8j0dIgIs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Supply — Toilet Flapper Replacement</video:title>
      <video:description>Locate the water supply valve, typically found on the wall or floor beneath the toilet tank. Turn the valve clockwise until the water flow stops completely. This cuts off the water supply to the toilet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lQQ8j0dIgIs</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10854-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/P6smVwsoDqE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — Toilet Flapper Replacement</video:title>
      <video:description>Locate the water supply valve on the wall behind the toilet. Turn the valve handle clockwise until it stops to shut off the water flow to the toilet tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/P6smVwsoDqE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10855-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ta99sWz9zXQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water and Drain Tank — Toilet Flapper Replacement</video:title>
      <video:description>First, turn off the water supply to the toilet using the shut-off valve located on the wall behind or beside the toilet. Flush the toilet to drain most of the water from the tank. Hold the flush lever down to empty as much water as possible. Then, use a large sponge or towel to soak up and remove the remaining water from the bottom of the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ta99sWz9zXQ</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10855-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R_70JdZtn3A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn off water and drain tank — Toilet Flapper Replacement</video:title>
      <video:description>Turn off the water supply to the toilet. Flush the toilet and hold the lever down to drain the tank. Sponge out any remaining water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R_70JdZtn3A</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10855-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8qCqUaqoojE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Empty Toilet Cistern — Toilet Flapper Replacement</video:title>
      <video:description>With the water supply off, flush the toilet to empty most of the water from the cistern. Since the water supply is off, it will not refill. Then, use a sponge to soak up any remaining water at the bottom of the cistern. This ensures a dry workspace for the next steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8qCqUaqoojE</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10856-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gVu2WzAJcw4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Flapper — Toilet Flapper Replacement</video:title>
      <video:description>With the toilet tank drained, carefully remove the old flapper. First, unhook the chain that connects the flapper to the toilet&apos;s flush handle lever. Then, detach the flapper from the overflow tube. This usually involves unclipping the flapper&apos;s &apos;ears&apos; or hinges from the pins on either side of the overflow tube. Some older models might have rubber that slides over the tube.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gVu2WzAJcw4</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10856-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VJAGm3EipRk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Flapper — Toilet Flapper Replacement</video:title>
      <video:description>The old flapper is typically attached to the overflow tube with small clips or tabs. Gently unsnap or slide the old flapper off these attachment points to remove it from the toilet tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VJAGm3EipRk</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10856-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lQQ8j0dIgIs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Flapper — Toilet Flapper Replacement</video:title>
      <video:description>The flapper is attached to the flush valve assembly by small &apos;ears&apos; or clips on either side. Gently unhook or unclip these ears from their posts on the flush valve to remove the old flapper entirely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lQQ8j0dIgIs</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10857-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R46iPSypNp4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Flapper Valve — Toilet Flapper Replacement</video:title>
      <video:description>Take your new toilet flapper valve. Align its mounting pegs or ears with the corresponding pegs on the overflow tube inside the toilet tank. Securely attach the new flapper by clipping or sliding it onto these pegs. Ensure it sits flush over the drain hole. Then, connect the new lift chain to the flush lever. It is crucial to leave a small amount of slack in the chain (about 1/2 to 1 inch) to allow the flapper to seal properly after flushing, but not so much that it gets caught.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R46iPSypNp4</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10857-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3W3u2O1dZws/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Flapper Valve — Toilet Flapper Replacement</video:title>
      <video:description>Take the new flapper valve and carefully connect each side of the valve to the pegs located on the side of the overflow tube. Once attached, ensure the flapper valve is properly positioned directly over the tank&apos;s drain opening leading to the toilet bowl. Next, clip the lift chain of the new flapper valve to the flush lever. Make sure to leave a small amount of slack in the chain; too much tension will prevent the flapper from closing, and too much slack can cause it to get tangled. Gently test the flush lever to confirm that the flapper valve moves with the proper range of motion, opening fully and closing completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3W3u2O1dZws</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10857-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LkJS-uQDXog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Flapper — Toilet Flapper Replacement</video:title>
      <video:description>Install the new flapper into the toilet tank. First, re-attach the flapper&apos;s &apos;ears&apos; or hinges onto the overflow tube at the base of the flush valve, ensuring they are securely seated. Next, connect the adjusted chain to the flush handle lever, making sure there is appropriate slack and the chain doesn&apos;t interfere with the flapper&apos;s movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LkJS-uQDXog</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10858-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FGMoFRI8mJc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water Supply — Toilet Flapper Replacement</video:title>
      <video:description>Go back to the water supply shut-off valve. Turn the knob counter-clockwise to turn the water back on. You will hear the toilet tank begin to fill with water. Open the valve completely to ensure full water pressure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FGMoFRI8mJc</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10858-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_YMzEgk9e14/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn on Water Supply and Check for Leaks — Toilet Flapper Replacement</video:title>
      <video:description>Slowly turn the water supply shut-off valve counter-clockwise to open the valve and allow water to flow back into the toilet tank. Observe all connections, especially at the fill valve and supply line, for any signs of leaks. Let the tank fill completely, then check the water level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_YMzEgk9e14</video:player_loc>
      <video:duration>90</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10858-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rxiORdnOc7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water Supply — Toilet Flapper Replacement</video:title>
      <video:description>Turn the water supply valve counter-clockwise to restore water flow to the toilet tank. Allow the tank to fill completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rxiORdnOc7Q</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10859-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I05uOB5DOFw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the flush — Toilet Flapper Replacement</video:title>
      <video:description>Flush the toilet and observe the filling process and the seal of the new flapper. The water should stop filling at the correct level, and there should be no water continuously running into the bowl.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I05uOB5DOFw</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10859-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PqC2uaB8YJI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Leaks — Toilet Flapper Replacement</video:title>
      <video:description>Once the new flapper is installed, turn the water supply valve back on to allow the toilet tank to refill. Listen carefully for any sounds of running water once the tank is full. Flush the toilet a few times and observe closely to ensure the flapper drops and forms a tight seal after each flush. If the toilet stops running and the water level in the tank remains stable, the leak is fixed. If the toilet continues to run, double-check the flapper&apos;s alignment and chain tension.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PqC2uaB8YJI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10859-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6W8nT4e5uT0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the New Flapper — Toilet Flapper Replacement</video:title>
      <video:description>After the new flapper and chain are installed, turn the water supply back on to the toilet. Allow the tank to fill completely. Once filled, observe closely to ensure that no water is leaking from the tank into the bowl. If there are no leaks, flush the toilet a few times to confirm proper operation. The toilet should no longer be running continuously.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6W8nT4e5uT0</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10852-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing new stair treads on wood stairs</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10852-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — installing new stair treads on wood stairs</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10852-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — installing new stair treads on wood stairs</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10853-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing new stair treads on wood stairs</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10853-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — installing new stair treads on wood stairs</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10853-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — installing new stair treads on wood stairs</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10842-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uUQQuVitEdo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Electrical Power — Dishwasher Repair</video:title>
      <video:description>Before undertaking any further inspection or repair, it is absolutely essential to disconnect the dishwasher from its electrical power source. This prevents the risk of electric shock. You can do this by either unplugging the dishwasher from its electrical outlet (often found under the kitchen sink) or by switching off the corresponding circuit breaker at your home&apos;s main electrical panel. If unsure which breaker controls the dishwasher, it&apos;s safest to turn off the main circuit breaker for the entire house.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uUQQuVitEdo</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10842-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hu_RjKIcaqw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Safely Shut Off Power and Water — Dishwasher Repair</video:title>
      <video:description>Before proceeding with any disconnection, it is crucial to safely shut off both the electrical power and the water supply to the dishwasher. First, locate the electrical breaker box and identify the circuit breaker for the dishwasher. Turn this breaker to the &apos;OFF&apos; position. To verify that the power is indeed off, use a non-contact voltage tester (like the Southwire 40120N) on the electrical wires connected to the dishwasher. The tester should not light up or beep, confirming no power. Next, locate the water shut-off valve, typically found under the kitchen sink. Turn this valve to the &apos;OFF&apos; position to stop the water flow to the dishwasher. Failure to shut off both utilities can result in electrical shock or water damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hu_RjKIcaqw</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10842-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ft7lXDPCEug/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Power and Water — Dishwasher Repair</video:title>
      <video:description>Before beginning any work on the dishwasher, ensure your safety. Unplug the dishwasher from its electrical outlet. If the dishwasher is hard-wired, locate its circuit breaker in the house&apos;s main panel and switch it off. Verify that the power is disconnected by attempting to turn on the dishwasher or pressing its control panel buttons; the panel should not light up. Finally, close the water supply valve that feeds water to the dishwasher, typically located under the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ft7lXDPCEug</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10843-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dglhg1gcfJ4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Supply — Dishwasher Repair</video:title>
      <video:description>Before attempting any work on the dishwasher, it is crucial to turn off its water supply. Locate the water shut-off valve, which is typically found under the kitchen sink. Depending on your plumbing setup, there might be a separate valve specifically for the dishwasher. Turn this valve all the way to the right (clockwise) to ensure the water supply is completely off. The video narrator demonstrates twisting the valve until it&apos;s completely closed, using the mnemonic &apos;Lefty Loosey, Righty Tidy&apos; to emphasize the correct direction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dglhg1gcfJ4</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10843-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s6DluU6KM98/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Supply — Dishwasher Repair</video:title>
      <video:description>Before performing any plumbing work, it is crucial to turn off the water supply to the dishwasher. For most dishwashers, this line is connected to the hot water supply under the kitchen sink. Locate the shut-off valve on the hot water line and turn it clockwise until it is fully closed. To confirm the water is off, turn on the kitchen hot water tap; the flow should stop.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s6DluU6KM98</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10843-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cP4rRbhNkz0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Water Supply — Dishwasher Repair</video:title>
      <video:description>Next, turn off the water supply to the dishwasher. Access the area under your kitchen sink, where you&apos;ll find the water lines. Locate the dedicated shut-off valve for the dishwasher&apos;s hot water line and turn it clockwise until it&apos;s fully closed. If there isn&apos;t a dedicated valve, you may need to turn off the main water supply to your entire house.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cP4rRbhNkz0</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10844-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8FPhgal_UYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Dishwasher Access Panels — Dishwasher Repair</video:title>
      <video:description>To gain access to the dishwasher&apos;s internal components and connections, you must remove the lower access panels. Locate the two Phillips head screws on the bottom left and right sides of the lower panel (toe kick). Remove these screws using a Phillips head screwdriver, noting that a magnetic tip is helpful to prevent dropping screws. Once the lower panel is removed, carefully shift and pull out the upper access panel, as it is held in place by tabs. Removing these panels provides much better access for inspection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8FPhgal_UYI</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10844-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_WWgUmdC_2Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Dishwasher Lower Access Panel — Dishwasher Repair</video:title>
      <video:description>Locate the bottom access panel of the dishwasher. Using a screwdriver (typically Phillips head or flathead, depending on the screws), remove the screws securing the lower access panel. Once screws are removed, carefully detach the panel to expose the internal components, including the drain pump solenoid and motor assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_WWgUmdC_2Q</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10844-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uUQQuVitEdo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Dishwasher Front Panels — Dishwasher Repair</video:title>
      <video:description>To access the underside components of the dishwasher, you&apos;ll need to remove the bottom front service panel and the toe panel. These panels are typically secured by mounting screws; use a screwdriver to remove them, then carefully pull both panels off. This provides an initial view of the area under the tub. For a more thorough inspection and better access, especially to internal door mechanisms, you may also need to remove the main front door panel. Open the dishwasher door and locate the Torx screws positioned along the outer edges of the inner door panel. Use a screwdriver to remove these screws. As you remove the last few screws, support the outer door panel with one hand to prevent it from swinging open or falling. Gently separate the outer door panel and the control panel slightly from the inner door panel. Locate and carefully disconnect the user interface control wire harness from its connection point. Once the harness is disconnected, you can fully remove the outer door panel and control panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uUQQuVitEdo</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10845-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uUQQuVitEdo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visual Leak Inspection with Flashlight — Dishwasher Repair</video:title>
      <video:description>After checking the primary connections, use a flashlight to conduct a detailed visual inspection of the entire underside of the dishwasher. Look carefully for any water trails, active drips, or old water stains on the floor, the base pan, or around any of the components under the appliance. This step aims to pinpoint the exact location of the leak if it&apos;s originating from an area other than the direct connections. Common leak points to check include the heating element, the sump, and the diverter motor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uUQQuVitEdo</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10845-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nvnVIK7O26E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Operate Dishwasher to Observe Leaks — Dishwasher Repair</video:title>
      <video:description>With the kick plate removed, the dishwasher&apos;s internal plumbing and electrical components are visible. To actively search for the leak, the appliance is turned on and set to a full &apos;normal wash&apos; cycle. The presenter advises against using shorter cycles like &apos;rinse and hold&apos; because some leaks might only manifest during specific phases of a complete wash cycle (e.g., during the main wash or draining). Use a flashlight to carefully inspect all exposed connections, hoses, and the pump area for any signs of dripping water as the dishwasher runs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nvnVIK7O26E</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10845-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KU7898nPXAg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Fill Hose — Dishwasher Repair</video:title>
      <video:description>Inspect the fill hose, a shorter hose that carries water from the water inlet valve to the dishwasher&apos;s tub. This hose is located underneath the dishwasher. Pull the dishwasher out to gain access. Check the fill hose and its connections for any signs of damage, cracks, or leaks. If the hose is damaged and leaking, it needs to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KU7898nPXAg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10846-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wSqhrqlq2T0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Water Inlet Valve — Dishwasher Repair</video:title>
      <video:description>The water inlet valve controls the flow of water into the dishwasher. It consists of a bracket, a valve body, and a solenoid. To access it, remove the dishwasher&apos;s front access panel. Check if the water supply valve under the sink is fully open and that there&apos;s good water pressure. If you have a valve with a screen, you can disconnect the water line to inspect and clean the screen for clogs. If water pressure and screen are fine, the solenoid might be faulty. Test the solenoid for continuity using a digital multimeter set to continuity mode. Disconnect the wires from the solenoid&apos;s terminals and touch the multimeter probes to each terminal. A good reading indicates continuity (typically a low resistance or a &apos;beep&apos;), while an &apos;OL&apos; (over limit) reading indicates no continuity, meaning the solenoid is bad and the valve needs replacement. The video shows a good reading as &apos;0.000&apos; and a bad reading as &apos;OL&apos;.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wSqhrqlq2T0</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10846-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9UxFcTXFewQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Water Inlet Valve — Dishwasher Repair</video:title>
      <video:description>The water inlet valve controls the flow of water into the dishwasher. It is typically located behind the lower access panel of the dishwasher, near the front. Two common issues with this valve are a clogged inlet screen or a defective solenoid. First, visually inspect the inlet screen for any debris or sediment that may be restricting water flow. Clean it if necessary. Second, use a multimeter to check the continuity of the solenoid on the water inlet valve. A lack of continuity indicates a faulty solenoid. If either the screen is blocked beyond cleaning or the solenoid is defective, the water inlet valve will need to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9UxFcTXFewQ</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10846-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KU7898nPXAg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Water Inlet Valve — Dishwasher Repair</video:title>
      <video:description>Locate the water inlet valve, usually found behind the access panel at the front bottom of the dishwasher. This valve controls water entry into the dishwasher. Inspect the valve body for any cracks or visible signs of water leakage. In some cases, an internal diaphragm might be damaged, or the solenoid could be stuck open, causing continuous water filling and overflow. If the valve is leaking or malfunctioning, it needs to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KU7898nPXAg</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10847-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xjMdAqpU20I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Troubleshoot Dishwasher Drainage Issues — Dishwasher Repair</video:title>
      <video:description>If your GE dishwasher is not draining and you observe standing water at the bottom of the tub, first check for blockages. On models equipped with fine and ultra-fine filters, remove and inspect these filters for any debris or obstructions. For models without an ultra-fine filter, 1-2 cups of clean water covering the bottom of the tub is considered normal, but excessive water indicates a problem. Ensure there are no large food items, such as noodles, lettuce, or bones, covering or blocking the sump area in the rear of the tub. Next, inspect the drain hose where it connects below the sink for any blockages or kinks. New GE dishwashers come with a white corrugated drain hose, which should be used; old, worn-out hoses can kink and cause blockages. Finally, confirm that the kitchen sink drain itself is not clogged. If a garbage disposer is installed, run it to clear the drain system. Always exercise caution and do not put hands into the garbage disposer to avoid serious injury. It is recommended to run the garbage disposer prior to operating the dishwasher to clear any food or debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xjMdAqpU20I</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10847-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z8F6MFi3ryA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Troubleshoot Dishwasher Not Draining - Debris and Hose Check — Dishwasher Repair</video:title>
      <video:description>Next, inspect the bottom of the dishwasher tub for large food pieces such as noodles, lettuce, or bones. These can obstruct the sump area and prevent proper drainage. Carefully clear out any large objects found. Additionally, examine the drain hose where it connects below the kitchen sink. Look for any blockages or kinks in the hose. Newer dishwashers typically come with a white corrugated drain hose, which should always be used. Reusing old, worn-out drain hoses can lead to kinking and blockages.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z8F6MFi3ryA</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10847-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-wyp0RU1M20/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose and Fix Drain Pump (If Sensor Cleaning Fails) — Dishwasher Repair</video:title>
      <video:description>If cleaning the pressure sensor did not resolve the &apos;failure to drain&apos; error, the issue might be with the drain pump itself. First, turn off the circuit breaker again. Locate the drain pump underneath the dishwasher (it&apos;s often a larger motor-like component connected to the drain hose). To remove it, you typically need to push a locking clip and then twist the pump assembly to detach it. Disconnect any electrical connectors attached to the pump. Once removed, you can use a multimeter set to ohms to test the pump&apos;s resistance, comparing the reading to the specifications in your dishwasher&apos;s manual (e.g., 0.3-5.0 mega-ohms). Also, check the impeller inside the pump for any obstructions or damage. Sometimes, simply dislodging a stuck impeller by gently tapping the pump can fix the issue. If the pump tests bad or is damaged, it will need to be replaced. Remember to clear large food particles from dishes before loading to prevent future clogs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-wyp0RU1M20</video:player_loc>
      <video:duration>154</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10848-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CI7SPHzh7j0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Heating Element — Dishwasher Repair</video:title>
      <video:description>To test the heating element, first, remove both terminal connectors from it using needle-nose pliers. Set your multimeter to ohms resistance. Place one lead on each of the heating element&apos;s spade connectors. A good heating element should show approximately 10 ohms of resistance. If your multimeter displays &apos;OL&apos; (overload) or a significantly different value, the element is likely bad and needs to be replaced. Additionally, test for continuity or ohms resistance between one of the spade connectors and the heater canister itself. If you get any value here, it indicates that the heating element wiring is touching the canister, causing a short circuit, and the element needs replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CI7SPHzh7j0</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10848-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ev-Vyh9xKHg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Heating Element and Thermostats — Dishwasher Repair</video:title>
      <video:description>Use a multimeter to test the continuity of the heating element. Set the multimeter to the ohms (Ω) setting, or use the continuity test function if available (which often beeps). A healthy heating element should measure between 10 to 50 ohms. The video demonstrates how to test across the two terminals of the heating element. If the multimeter shows an &apos;OL&apos; (open loop) or &apos;1&apos; (infinite resistance) and does not beep, the element is broken. Then, test the thermistor and thermostat (which are typically attached to the heating element housing) by checking continuity across their leads. They should show continuity if healthy. If any of these components fail the continuity test, they need to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ev-Vyh9xKHg</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10848-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/noUWYyylNJ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Heating Elements — Dishwasher Repair</video:title>
      <video:description>The final major electrical components to test are the heating elements. Switch your multimeter to resistance mode (ohms, Ω). Carefully place the probes across the terminals of each individual heating element. A healthy heating element should present a specific resistance reading. The video shows readings of approximately 11.8 ohms and 12 ohms for two different elements, indicating they are in good condition. Significant deviation (e.g., very high or infinite resistance) suggests a faulty element.</video:description>
      <video:player_loc>https://www.youtube.com/embed/noUWYyylNJ0</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10849-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uUQQuVitEdo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Door Gasket — Dishwasher Repair</video:title>
      <video:description>If you observe water leaking from the dishwasher door, the first step is to open the door and visually inspect the gasket, also referred to as the door seal. Carefully check along its entire length for any signs of tears, cracks, or missing sections. Any damage to this seal can compromise its ability to contain water within the tub, leading to leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uUQQuVitEdo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10849-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zmYUJQtr6lc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Side Door Gasket for Damage — Dishwasher Repair</video:title>
      <video:description>Open the dishwasher door completely. Perform a thorough visual examination of the rubber door gasket (seal) running along the sides of the dishwasher&apos;s tub opening. Look for any visible tears, cuts, or signs of wear. Additionally, check if any section of the gasket has been pulled out of its retaining channel. The presenter demonstrates pressing the gasket back into its channel if it&apos;s loose or dislodged. He also explains that over time, these gaskets can become hard and brittle, losing their flexibility, which may necessitate replacement. The video shows the presenter bending a section of the gasket to illustrate how a healthy, flexible gasket should feel compared to a hardened one.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zmYUJQtr6lc</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10849-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/P3d1G_4NcqM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect the Door Gasket — Dishwasher Repair</video:title>
      <video:description>The door gasket, usually made of rubber or vinyl, creates a watertight seal around the dishwasher door when closed. Inspect the gasket for any signs of brittleness, cracks, tears, or hardening, which can compromise the seal. Also, check for any food particles or debris lodged in the gasket that might be preventing a proper seal. Clean any debris and if the gasket is damaged, it will need to be replaced to stop leaks from around the door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/P3d1G_4NcqM</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10850-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/v-DekPW78ck/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Concluding Recommendations — Dishwasher Repair</video:title>
      <video:description>If all the components you&apos;ve checked (door switch, overfill float switch, and water inlet valve) appear to be functional based on your tests, the problem might be a wiring break elsewhere in the circuit or a defective electronic control board. These issues can be more complex to diagnose and repair. In such cases, it is recommended to have a professional service technician diagnose and repair your dishwasher to ensure it is done correctly and safely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/v-DekPW78ck</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10851-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l3uCrKXQHRk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Utilities and Test — Dishwasher Repair</video:title>
      <video:description>With all connections re-established and the panels replaced, turn the water supply back on to the dishwasher. Then, return to your circuit breaker panel and switch the dishwasher&apos;s breaker back to the &apos;On&apos; position. Finally, run a short test cycle on your dishwasher to confirm that it is functioning properly, checking for any leaks or unusual noises.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l3uCrKXQHRk</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10851-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KU7898nPXAg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Water, Test Dishwasher — Dishwasher Repair</video:title>
      <video:description>Once the leak issue is resolved and any necessary parts have been replaced, plug the dishwasher back into the electrical outlet or switch on the circuit breaker. Turn the water supply back on from the shut-off valve under the sink. Run a test cycle to ensure the repair was successful and there are no further leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KU7898nPXAg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10851-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5HbBclI9jjE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test — Dishwasher Repair</video:title>
      <video:description>With all connections secured and panels in place, turn the water supply back on by rotating the valve under the sink. Then, return to the circuit breaker and turn the power supply to the dishwasher back on. Finally, run a short cycle or test the dishwasher&apos;s functions to confirm that it is working properly, that there are no leaks from the water supply or drain hose connections, and that all features are operational.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5HbBclI9jjE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10840-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — installing peel-and-stick carpet stair treads</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10840-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing peel-and-stick carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10840-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — installing peel-and-stick carpet stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10841-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — installing peel-and-stick carpet stair treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10841-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing peel-and-stick carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10841-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — installing peel-and-stick carpet stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10838-1</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — Stair Tread Installation</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10838-2</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Installation</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10838-3</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vCyH1WZUDpE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Sections — Stair Tread Installation</video:title>
      <video:description>Begin by thoroughly cleaning the existing wooden stairs to remove any dust, debris, or old adhesive residue. Then, use a measuring tape to accurately determine the dimensions of each stair tread (the horizontal part) and riser (the vertical part). Also, measure any landing areas. Lay out the bulk carpet material on a clean, flat surface. Using a measuring tape and a long straight edge, mark the precise cutting lines for each individual carpet section required for the treads, risers, and any curved or landing areas. Carefully cut the carpet along these lines using a sharp utility knife, ensuring all pieces are accurately sized for their specific locations on the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vCyH1WZUDpE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10837-1</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Carpet Pieces — Stair Tread Installation</video:title>
      <video:description>Using a sharp utility knife and a T-square or long straight edge, carefully cut the carpet pieces along the marked lines. Ensure your cuts are precise and clean. For the connecting edges between steps, a perfectly straight cut is essential for seamless joins. For other edges, maintain the extra inch of material you marked earlier. The presenter demonstrates cutting the carpet pieces, emphasizing the importance of accuracy for a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10837-2</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dLwqNHREkrQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet — Stair Tread Installation</video:title>
      <video:description>A large piece of carpet is rolled out on the floor. The width of each stair step is carefully measured using a tape measure. A straight edge is then aligned with the measurement, and a utility knife is used to precisely cut the carpet to the required size for each step. This ensures that each carpet piece fits snugly across the width of its respective stair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dLwqNHREkrQ</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10837-3</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bCDU2rmBE8c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan and Cut Carpet Pieces — Stair Tread Installation</video:title>
      <video:description>Carefully plan out your carpet cuts to maximize material usage and ensure a consistent look. Draw a detailed diagram of your stairs on graph paper, labeling each tread and riser with its exact dimensions. Then, use this plan to cut your carpet roll into individual pieces using a utility knife and a long, sturdy straight edge. Cut from the back of the carpet for cleaner edges and to protect the pile.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bCDU2rmBE8c</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10836-1</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Tread Application — Stair Tread Installation</video:title>
      <video:description>Continue the application process by slowly and steadily peeling back the remaining backing paper from the anti-slip tread while simultaneously pressing down with the roller. Work your way along the length of the tread, ensuring consistent pressure to eliminate air bubbles and create a strong bond. Once all the treads are in place, give each one a final firm press with the roller, starting from the center and working outwards. This ensures they are perfectly secure and free of any trapped air, making your stairs safe and ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10836-2</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10836-3</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10833-1</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Stair Tread Installation</video:title>
      <video:description>Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10833-2</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Staircase — Stair Tread Installation</video:title>
      <video:description>Before installing the carpet stair treads, thoroughly clean the entire staircase. Begin by sweeping all wooden steps to remove any loose dust, dirt, or debris. Once swept, use a damp cloth to wipe down each step and the front edge (riser/nose) to ensure no fine dust or residue remains. This creates a clean, smooth surface for the adhesive treads to bond effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10833-3</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Stair Tread Installation</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10839-1</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10839-2</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place the First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin the installation by taking one carpet stair tread and carefully positioning it on the desired step. Ensure the tread is centered, straight, and leaves an even border of exposed wood on the sides and front of the stair. Once properly aligned, firmly press down across the entire surface of the tread, especially focusing on the edges and corners, to activate the non-slip backing and securely bond it to the clean wooden stair. The video shows a foot pressing on the tread and a hand lifting it slightly to confirm its non-slip nature.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10839-3</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the First Tread — Stair Tread Installation</video:title>
      <video:description>Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10835-1</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zb2dGhifZhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Use — Stair Tread Installation</video:title>
      <video:description>After all the carpet treads have been installed, take a moment to visually inspect the entire staircase to ensure each tread is properly aligned and firmly adhered. The video concludes by showing a dog confidently walking both down and up the newly carpeted stairs, demonstrating the improved traction, safety, and comfort provided by the new treads, particularly for pets and potentially young children or the elderly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zb2dGhifZhE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10835-2</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0l3UWfmoDiY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Enjoyment — Stair Tread Installation</video:title>
      <video:description>Once all carpet stair treads are installed, conduct a final visual inspection to ensure that each tread is securely in place, properly aligned, and that the staircase has a uniform appearance. The newly installed treads significantly improve the safety of the stairs, particularly for children, the elderly, and pets, by providing a non-slip surface. The video demonstrates this enhanced safety by showing dogs confidently using the now-covered staircase. The treads also add a cozy and beautiful touch to the home decor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0l3UWfmoDiY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10835-3</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Review and Enjoyment — Stair Tread Installation</video:title>
      <video:description>Once all stair treads are installed, step back and visually inspect the entire staircase. Check for uniform spacing, straight alignment, and secure adhesion of all treads. Walk up and down the stairs to ensure they feel stable and comfortable. The video showcases the completed staircase with all treads installed, demonstrating the aesthetic and functional improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10834-1</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10834-2</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Remaining Stair Treads — Stair Tread Installation</video:title>
      <video:description>Repeat the cleaning, marking (if necessary), and installation process for each remaining stair. Use the template or marks created earlier to maintain consistency in placement. Peel the backing, align, and firmly press each tread into place until all stairs have been covered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10834-3</loc>
    <lastmod>2026-11-19T22:20:44.896Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sfgZWTtWnVc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Remaining Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the process of installing the stair treads, one step at a time, moving up the staircase. For each tread, repeat the centering and securing steps as outlined for the first tread. Consistency in placement is key to a uniform and professional look. Use the measuring tape to verify each tread is centered and positioned identically to the previous one. Press down firmly to ensure proper adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sfgZWTtWnVc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-19T22:20:44.896Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10815-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VmKR1n-iWrw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Outdoor Condenser — Air Conditioner Installation</video:title>
      <video:description>Go outside to the planned location for the outdoor condenser unit. Place the equipment pad on a flat, even, and sturdy surface. With the assistance of another person (due to the weight), carefully lift and place the condenser unit onto the equipment pad, ensuring it is centered and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VmKR1n-iWrw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10815-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K4DX3Dq1eGw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Outdoor Condenser Unit — Air Conditioner Installation</video:title>
      <video:description>Carefully lift and position the outdoor condenser unit onto the prepared concrete pad. This step typically requires two people due to the unit&apos;s weight and bulk. Mark the mounting bolt locations on the concrete pad through the unit&apos;s feet. Drill holes into the concrete using a masonry bit, then insert and hammer in the provided mounting bolts. In this video, the installer initially drove the bolts too deep, preventing proper nut attachment with the rubber pads, so he opted to secure the unit directly without the pads. It&apos;s important to ensure the bolts are driven to the correct depth to allow for the rubber pads if desired.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K4DX3Dq1eGw</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10815-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K4DX3Dq1eGw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Outdoor Unit Site and Concrete Pad — Air Conditioner Installation</video:title>
      <video:description>Identify the ideal location for the outdoor condenser unit, ensuring sufficient clearance for airflow and maintenance. In this video, the installer clears overgrown bushes using a riding lawnmower and pruning shears to create a suitable, open space. Next, construct a concrete form using 2x4 lumber and rebar for reinforcement. Dig a shallow trench, lay down gravel for drainage, and secure the form with stakes before pouring concrete to create a stable, level pad for the outdoor unit. Allow the concrete to cure overnight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K4DX3Dq1eGw</video:player_loc>
      <video:duration>174</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10816-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K4DX3Dq1eGw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Outdoor Condenser Unit — Air Conditioner Installation</video:title>
      <video:description>Carefully lift and position the outdoor condenser unit onto the prepared concrete pad. This step typically requires two people due to the unit&apos;s weight and bulk. Mark the mounting bolt locations on the concrete pad through the unit&apos;s feet. Drill holes into the concrete using a masonry bit, then insert and hammer in the provided mounting bolts. In this video, the installer initially drove the bolts too deep, preventing proper nut attachment with the rubber pads, so he opted to secure the unit directly without the pads. It&apos;s important to ensure the bolts are driven to the correct depth to allow for the rubber pads if desired.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K4DX3Dq1eGw</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10816-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zmEuI-dZ5BI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place Outdoor Condenser — Air Conditioner Installation</video:title>
      <video:description>Carefully transport the outdoor condenser unit to the location you previously selected during Part 1, Step 1. Gently place the unit in its designated spot, making sure it is level and stable on the firm ground, and adheres to all recommended spatial requirements for proper air circulation and maintenance access.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zmEuI-dZ5BI</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10816-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VmKR1n-iWrw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Outdoor Condenser — Air Conditioner Installation</video:title>
      <video:description>Go outside to the planned location for the outdoor condenser unit. Place the equipment pad on a flat, even, and sturdy surface. With the assistance of another person (due to the weight), carefully lift and place the condenser unit onto the equipment pad, ensuring it is centered and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VmKR1n-iWrw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10817-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/O0D8t5Ruxqw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Evaporator Coil with TXV — Air Conditioner Installation</video:title>
      <video:description>The old evaporator coil has been successfully removed, leaving a clear space for the new unit. The technician then applies a bead of caulk to the bottom edges of the new evaporator coil, ensuring a tight seal when it&apos;s placed into the transition box. This prevents air leaks and improves system efficiency. The new Rheem evaporator coil is then carefully positioned and installed, ensuring proper alignment within the existing ductwork. A key feature of the Rheem unit is its built-in TXV (Thermostatic Expansion Valve), which simplifies installation by eliminating external TXV connections. The sensing bulb for the TXV is mounted onto the suction line (large copper line) at the 2 o&apos;clock position (or 10 o&apos;clock), with a specialized clip and foam insulation to protect it from ambient air, ensuring accurate temperature readings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/O0D8t5Ruxqw</video:player_loc>
      <video:duration>213</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10817-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8OzGRAvJO7Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Indoor A-Coil and Seal Ductwork — Air Conditioner Installation</video:title>
      <video:description>Carefully slide the new A-coil into the furnace plenum, ensuring it sits securely and correctly on the fabricated platform. The platform includes runners to guide the coil into place and prevent movement. Then, seal any gaps or openings around the installed coil with metal tape to ensure an airtight seal and efficient airflow.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8OzGRAvJO7Y</video:player_loc>
      <video:duration>146</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10817-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GU2RMVF-Ihg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Evaporator Coil — Air Conditioner Installation</video:title>
      <video:description>The new Bosch evaporator coil is carefully placed into the existing furnace cabinet in the attic. The technician notes the use of mastic tape and aluminum tape to seal the connections between the new coil, the furnace, and the supply plenum trunk, ensuring a tight seal for airflow. The existing condensate drain is reconnected to the new coil, and the refrigerant lines are temporarily bent into place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GU2RMVF-Ihg</video:player_loc>
      <video:duration>235</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10818-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DzVJiSQNbew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Outdoor Unit Wiring and Refrigerant Lines — Air Conditioner Installation</video:title>
      <video:description>Remove the panel that covers the refrigerant valves and wiring connections on the outdoor unit. Some models may already have these components exposed. Then, remove the protective screw caps from the refrigerant valves. Connect the pipe joint of the outdoor unit to the copper line set, starting the union nut by hand to avoid cross-threading. Use a torque wrench to tighten the connection to the specifications provided in your manual. Next, connect the multi-conductor wire that runs from the indoor air handler to the associated terminals on the outdoor unit, ensuring careful color-coding matches. Double-check all wiring connections for correctness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DzVJiSQNbew</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10818-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/twV-c5i0MjM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Line Set to Indoor Unit and Route Through Wall — Air Conditioner Installation</video:title>
      <video:description>The indoor unit&apos;s cover is carefully opened or removed to access its internal connections. The pre-charged line set, which consists of insulated copper refrigerant lines, a communication wire, and a condensate drain hose, is then connected to the appropriate ports on the indoor unit. Once connected, the bundled line set is carefully fed through the prepared wall opening, guiding it from the inside of the building to the exterior.</video:description>
      <video:player_loc>https://www.youtube.com/embed/twV-c5i0MjM</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10818-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2bMb-K_baOI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Outdoor Condenser and Test System — Air Conditioner Installation</video:title>
      <video:description>On the exterior of the house, secure the specialized wall bracket for the outdoor condensing unit. This bracket is often designed to mount to the house structure and may require blocking behind it to protect vinyl siding. Use a drill and appropriate fasteners (like screws or lag bolts) to firmly attach the bracket to the building. Ensure the bracket is level and capable of supporting the weight of the condenser. Next, drill holes through the exterior wall for the refrigerant lines, condensate drain, and electrical wiring to pass through. Carefully lift the outdoor condensing unit and mount it onto the installed wall bracket. Connect the electrical wiring to the unit, ensuring a water-tight connection to protect internal circuit boards. Connect the refrigerant line sets, and the condensate drain line. Install a service switch and, optionally, a surge protector near the outdoor unit for safety and system longevity. Before adding refrigerant, perform a crucial test: pressurize the line sets with nitrogen to check for any leaks. Then, use a vacuum pump to evacuate all air, impurities, and nitrogen from the lines. This ensures a clean, dry system ready for refrigerant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2bMb-K_baOI</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10819-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xPhO330avBw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Outdoor Unit Electrical Wiring — Air Conditioner Installation</video:title>
      <video:description>Connect the main electrical wiring from the house to the outdoor unit&apos;s electrical panel. Ensure the main breaker for the circuit is off. Connect the black (hot), white (neutral), and green (ground) wires to their corresponding terminals (L, N, and ground symbol) within the unit. Secure the wiring with a clamp to prevent it from being pulled out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xPhO330avBw</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10819-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FditJqUenAk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire the Outdoor Unit and Quick Disconnect Box — Air Conditioner Installation</video:title>
      <video:description>Proceed with wiring the outdoor unit and the quick disconnect box. Use a suitable connector (e.g., from a previous project heat treating oven) to ensure a watertight connection for the cables running from the indoor unit to the outdoor condenser. Open the outdoor unit&apos;s electrical panel. The outdoor unit&apos;s wiring is also labeled on the panel: connect the green ground wire to the green ground screw on the left, the yellow wire to port number one, the white wire to port number two, and the black wire to port number three. For the main power side, the creator used a pre-made 6-foot, 10 American Wire Gauge (AWG) whip. Verify that the 20 amp breaker (from Step 1) is turned off. Wire up the quick disconnect box: note that the red wire on the whip will serve as the neutral. The white wire goes to one line, black to the other. Apply PVC adhesive to the flexible conduit and fittings for a watertight fit. Finally, at the outdoor unit, feed the wires from the whip, cut them to a shorter length, strip the ends, and add appropriate connectors. Connect the green wire to the green ground screw on the right side of the panel, the red/white wire to the neutral terminal, and the black wire to the load terminal. Once all connections are made and verified, close the electrical panel covers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FditJqUenAk</video:player_loc>
      <video:duration>105</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10819-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0gMVZxI5jRQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire Outdoor Unit Main Power — Air Conditioner Installation</video:title>
      <video:description>Connect the outdoor AC unit&apos;s main power supply. The outdoor unit&apos;s phase (red wire) and neutral (black wire) power terminals should be connected to the output terminals of the isolator switch. The input terminals of the isolator switch should then be connected directly to the main incoming phase and neutral lines from your electrical panel or distribution board. This connection is typically separate from the circuit feeding the indoor unit&apos;s socket, providing dedicated high-current power and a local disconnection point for the outdoor unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0gMVZxI5jRQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10820-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qYiaKRgCREI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Evacuate System and Activate Refrigerant Charge — Air Conditioner Installation</video:title>
      <video:description>After all brazed connections have cooled, a vacuum pump (Robinair VacuMaster) is connected to the service ports using a manifold gauge set. The pump is turned on to evacuate the refrigerant lines, removing all air, moisture, and non-condensable gases from the system. This step is crucial for the proper operation and longevity of the AC unit. Once a deep vacuum is achieved and held (indicating no leaks), the vacuum pump is disconnected. The service valves on the outdoor unit are then slowly opened, allowing the factory-charged refrigerant to fill the newly connected refrigerant lines and the indoor evaporator coil. Once the system is charged, the manifold gauges are removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qYiaKRgCREI</video:player_loc>
      <video:duration>312</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10820-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EY77sPyVM2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Evacuate, Charge, and Secure Refrigerant System — Air Conditioner Installation</video:title>
      <video:description>After connecting the refrigerant lines, it is critical to evacuate the system to remove all air and moisture. This is done by connecting a manifold gauge set, like the &apos;MASTERCOOL&apos; brand shown, to the service ports and attaching a vacuum pump (not shown). The gauges indicate the vacuum pressure. Once the desired vacuum is reached and held, then the vacuum pump is disconnected. Then, the service valves on the outdoor unit are fully opened using an Allen key to allow the factory-charged refrigerant to flow into the entire system. Finally, replace and tighten the protective caps on the service ports with an adjustable wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EY77sPyVM2c</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10820-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QlOS_SA0QCI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Charge Refrigerant and Finalize Connections — Air Conditioner Installation</video:title>
      <video:description>After successfully holding a deep vacuum (below 500 microns), the system is ready for charging. First, attach the refrigerant cylinder (containing R-454B) to the manifold gauges. Carefully open the liquid line service valve (the larger line) fully, and then fully open the suction line service valve (the smaller line). This releases the factory pre-charge from the outdoor unit into the entire system. Next, use a digital scale to add the precise amount of additional R-454B refrigerant required for the specific line set length, following the manufacturer&apos;s charging instructions. Once charged, close all service valves and remove the hoses, ensuring all caps are re-secured to prevent leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QlOS_SA0QCI</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10821-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WY9KxQgHEGY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Connection for Leaks — Air Conditioner Installation</video:title>
      <video:description>Perform a leak test on the newly connected line set points. Prepare a soapy water mixture in a spray bottle. Generously spray the mixture over both line set connection points. Carefully observe these areas for the formation of any bubbles, which would indicate a refrigerant leak. If bubbles are seen, you must close the valves, re-tighten the line set connections with wrenches, re-open the valves, and then re-apply the soapy water to re-test for leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WY9KxQgHEGY</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10821-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K4DX3Dq1eGw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Release Pre-Charged Refrigerant and Check for Leaks — Air Conditioner Installation</video:title>
      <video:description>Using an Allen wrench, carefully open the service valves on the outdoor condenser unit. This action releases the pre-charged R410A refrigerant from the outdoor unit into the newly connected line set and indoor air handler. Listen for the sound of refrigerant flowing. After releasing the refrigerant, spray a soapy water solution (or a specialized leak detector spray) onto all the newly made connections (both on the outdoor unit and where the line set exits the wall). Look for bubbles, which would indicate a leak. If no bubbles appear after several minutes, the connections are sealed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K4DX3Dq1eGw</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10821-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TI1FlB2U46Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Release Refrigerant and Check for Leaks — Air Conditioner Installation</video:title>
      <video:description>After connecting the refrigerant lines, open the service valves on the outdoor unit to release the pre-charged refrigerant into the system. Immediately after, use soapy water in a spray bottle to check all connections for leaks. Apply a generous amount of soapy solution to each joint; if bubbles appear, there is a leak. Initially, no leaks were detected. However, a faint hiss was later heard from inside the air handler, prompting further investigation. This suggests a potential leak within the unit itself, necessitating removal of an access panel to locate it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TI1FlB2U46Y</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10822-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xPhO330avBw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Indoor Unit Electrical Wiring — Air Conditioner Installation</video:title>
      <video:description>The installer demonstrates connecting the electrical wiring to the indoor unit before mounting it. This is done by matching the numbered wires (1, 2, 3, and ground) from the wire harness to the corresponding terminals on the unit&apos;s electrical block. A small plastic clip is used to secure the wires inside the unit. This step is performed before final mounting for easier access.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xPhO330avBw</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10822-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0gMVZxI5jRQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Indoor Unit to Power and Control — Air Conditioner Installation</video:title>
      <video:description>Connect the indoor AC unit&apos;s power cable. The green wire (earth), black wire (neutral), and red wire (phase) from the indoor unit&apos;s cable should be connected to an AC plug. This plug will then be inserted into the 16 Amp power socket wired in the previous step. Additionally, connect the two communication/control wires from the indoor unit (yellow and blue, as indicated in the diagram) to their respective terminals on the outdoor AC unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0gMVZxI5jRQ</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10822-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5trJX6Ef1iI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire the Indoor Unit — Air Conditioner Installation</video:title>
      <video:description>Before mounting the indoor unit, it&apos;s essential to connect the electrical wires. Open the front cover of the indoor unit to access the terminal block. Feed the communication cable through the designated hole and connect the individual wires (typically labeled 1, 2, 3, and ground) to their corresponding terminals on the block. Ensure each connection is secure with lots of surface area and no insulation is caught under the terminal. Once wired, you can close the terminal block cover.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5trJX6Ef1iI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10823-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VmKR1n-iWrw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Power On and System Testing — Air Conditioner Installation</video:title>
      <video:description>After all connections (including electrical by a licensed professional) are complete and secured, turn the main power back on at the breaker for the outdoor unit. Go back inside and use the provided remote control to turn on the Mr. Cool system. Once the system powers on, thoroughly test each operational mode: Heat, Cool, Dry, and Fan. Allow the system to run in each mode for at least 5 minutes to confirm proper functionality and ensure that all features operate according to the product manual&apos;s descriptions. Verify that the indoor unit is blowing air correctly and that the outdoor unit is operating as expected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VmKR1n-iWrw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10823-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c9VivD3h6J0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>System Activation and Testing — Air Conditioner Installation</video:title>
      <video:description>After all mechanical and electrical connections are made, perform a thorough system check. Ensure the outdoor condenser unit is running, the indoor air handler fan is operating, and cool air is being discharged from the supply vents. The video shows the outdoor Goodman brand condenser unit running and confirming it&apos;s working perfectly after the installation. This step indicates the completion of the physical installation and initial operational verification.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c9VivD3h6J0</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10823-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DzVJiSQNbew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial System Startup and Check — Air Conditioner Installation</video:title>
      <video:description>After all connections are complete, the system has been properly evacuated, and refrigerant has been released, it&apos;s time to power up the unit. Start the system using the handheld remote control. Observe the indoor unit&apos;s display and check for proper operation by feeling the airflow and temperature output. The system should begin heating or cooling efficiently, providing comfortable air as intended.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DzVJiSQNbew</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10824-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qODV6X6JCu4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>System Startup and Final Checks — Air Conditioner Installation</video:title>
      <video:description>With the system charged and all connections complete, turn on the outdoor condenser unit. Listen for proper fan and compressor operation. Ensure the suction line feels cold, indicating the system is pulling heat effectively. The new system should be quiet and operate efficiently. Once temperatures are warmer, re-check the refrigerant charge and top it off if necessary to optimize performance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qODV6X6JCu4</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10824-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mhorI4nHCFU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Proper System Operation — Air Conditioner Installation</video:title>
      <video:description>With the new condensing unit in place, power restored, and the system properly charged with refrigerant, verify proper operation. Observe the unit to ensure it is running smoothly and cooling effectively. Check all connections one final time for any signs of leaks or loose fittings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mhorI4nHCFU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10824-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kJNOjuZBswY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Checks and System Restart — Air Conditioner Installation</video:title>
      <video:description>To finalize the maintenance, connect manifold gauges to the service ports of the outdoor unit to measure the refrigerant pressures, ensuring they are within the manufacturer&apos;s specifications. After recording the readings, safely disconnect the gauges. Conduct a thorough check of the entire work area, ensuring all tools are collected and any drop cloths or protective materials are removed. Return to the main electrical panel to switch the circuit breakers for the HVAC system back to the &apos;ON&apos; position. Lastly, return to the outdoor unit to verify that it starts up and operates correctly, confirming the success of the maintenance. Give a &apos;thumbs up&apos; gesture to indicate completion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kJNOjuZBswY</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10805-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Septic Tank Access Points — Septic System Maintenance</video:title>
      <video:description>The first step involves carefully locating the buried inlet and outlet access lids of the septic tank. This typically requires probing the ground and then digging to expose the lids. The video shows the process of excavating the soil to reveal these access points. Special care must be taken to avoid damaging any existing buried utility lines or irrigation systems during excavation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10805-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KiThznLYJ2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Access Septic Tank Lids — Septic System Maintenance</video:title>
      <video:description>Begin by locating the septic tank lids. In this case, the customer had already dug up the outlet side lid. If the lids are buried, carefully excavate the soil around the access points until both the inlet and outlet lids are exposed and accessible. The video shows a shovel being used to clear soil around the access point. Note that septic tank lids can be heavy and require care when opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KiThznLYJ2U</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10805-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0Z5KAIuMIBQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Septic Tank Lids — Septic System Maintenance</video:title>
      <video:description>The video begins by showing a dug-out area, indicating prior knowledge of the general septic tank location. The presenter identifies the septic tank lid, noting that his tank has two. He mentions needing a rough idea of the tank&apos;s location to start. He then uses a metal pry bar to probe the ground. By listening for the distinctive sound of the bar hitting the concrete lid, he identifies the precise location of the tank. He then outlines the tank&apos;s perimeter with white spray paint based on these probe points.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0Z5KAIuMIBQ</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10814-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8BDBsLYbYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Avoid Flushing Harmful Substances — Septic System Maintenance</video:title>
      <video:description>To maintain the beneficial microorganisms crucial for your septic system&apos;s function, it is critical to avoid flushing or draining certain harmful substances. Never use anti-bacterial soaps, automatic toilet bowl cleaners (which can release harsh chemicals into the tank), flushable wipes, or other sanitary products, as these do not break down and can cause clogs. Avoid liquid fabric softeners, harsh chemicals, food scraps and coffee grounds (which add unnecessary solids), oils, greases, and fats (which solidify and cause blockages), drain decloggers (which can kill bacteria and damage pipes), cigarette butts, and pharmaceuticals. Instead, opt for natural and biodegradable cleaning products that are phosphorus-free.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8BDBsLYbYI</video:player_loc>
      <video:duration>86</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10814-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PUP8_IY-Sgs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify and Avoid Harmful Waste — Septic System Maintenance</video:title>
      <video:description>Introducing non-biodegradable or harmful substances into the septic system can severely disrupt its natural biological processes and lead to costly failures. For instance, if the internal T-baffle (which directs flow and retains scum) were absent, the floating scum layer (composed of grease, non-biodegradable wipes, etc.) would flow directly into the perforated pipes of the leaching field, quickly clogging them and preventing proper drainage. Similarly, chemicals like paint or excessive amounts of solid materials like kitty litter (made of clay) and coffee grounds can kill the beneficial bacteria in the septic tank, halting the essential decomposition process. When the system&apos;s ability to process waste is compromised, the tank fills up, causing sewage to back up into the house, and necessitating expensive professional pumping and cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PUP8_IY-Sgs</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10814-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1SeIl9kSGx0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Only Flush Waste and Toilet Paper — Septic System Maintenance</video:title>
      <video:description>Exercise extreme caution regarding what you flush down the toilet, especially if your property is connected to a septic system. Septic systems are delicate and designed to handle only human waste and toilet paper. Avoid flushing any other items, including feminine hygiene products, so-called &apos;flushable&apos; wipes, or any other non-biodegradable materials. These foreign objects can clog the system, damage pumps, and disrupt the delicate bacterial balance in a septic tank. Even if you are on a municipal sewer system, practicing these habits is beneficial as it reduces the strain on wastewater treatment plants and saves taxpayer money by preventing costly blockages and maintenance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1SeIl9kSGx0</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10806-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dZ9xUgOOElM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Septic Tank Lids — Septic System Maintenance</video:title>
      <video:description>Begin by inspecting the septic tank lids. Ensure that all lids are accessible, not buried under excessive growth, and securely fastened with bolts. Unbolted lids can be extremely dangerous due to the risk of falling into the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dZ9xUgOOElM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10806-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RBwcWvGoULc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Lids and Inspect Baffles — Septic System Maintenance</video:title>
      <video:description>Using a specialized tool like the T&amp;T Top Popper, the heavy concrete septic tank lids are carefully lifted. Below the main lid, internal baffle caps are also removed. This provides clear access to both the outlet and inlet baffles for visual inspection. The inspection reveals significant root intrusion and sludge in the outlet line, indicating a severe blockage, and confirms the presence of an existing inlet baffle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RBwcWvGoULc</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10807-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open Septic Tank Lids — Septic System Maintenance</video:title>
      <video:description>Once the septic tank lids are exposed, carefully remove them to access the tank&apos;s chambers. The video demonstrates using a tool, possibly a small pickaxe or lid lifter, to pry open the lids. Special attention is required for the outlet side lid, as irrigation lines may be closely situated. The operator carefully shimmies off the lid to avoid breaking these lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10807-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j5ORNB1Yp3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Septic Lid — Septic System Maintenance</video:title>
      <video:description>To access the filter, locate the screws around the perimeter of the middle septic lid. Use an impact driver to efficiently remove these screws. The presenter explicitly mentions using a Makita brand impact driver, but any suitable impact driver or even a hand screwdriver can be used. Once all screws are removed, carefully lift the lid to expose the inside of the septic tank and the filter. Observe the water level; it should be below the filter line. If it&apos;s above, do not pull the filter out, as this indicates a potential issue with the leach field that needs to be resolved before cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j5ORNB1Yp3g</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10807-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hPu7yybzyr8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Open Septic Tank Access — Septic System Maintenance</video:title>
      <video:description>Proceed outdoors to locate your septic tank. The presenter notes that most septic tanks typically have three access points. For adding the mixture, it&apos;s generally recommended to access the tank closest to the house, which is primarily responsible for holding solids. Using a suitable tool, such as a pickaxe or crowbar, carefully lift and move the heavy concrete lid to reveal the access hole. Be prepared, as some tanks may have a secondary, lighter plug cap underneath the main lid that also needs to be removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hPu7yybzyr8</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10808-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dZ9xUgOOElM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Inlet Sanitary Tee and Scum Layer — Septic System Maintenance</video:title>
      <video:description>Inspect the inlet sanitary tee inside the septic tank. Look for any large accumulations of plastics, wipes, or other non-flushable items that could cause blockages or system issues. Also, check the scum layer for any unusual items that indicate improper flushing habits in the household. The presence of a mature scum layer is generally a good sign of proper system function.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dZ9xUgOOElM</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10808-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Cq3zoN7kfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access and Prepare Sludge Tank — Septic System Maintenance</video:title>
      <video:description>After inspecting the pump tank, proceed to the sludge tank. Use a cordless impact driver to unscrew and remove its lid. Observe the contents of the sludge tank; often, a thick crust forms on the surface. To prepare the sludge for pumping, use a &apos;Crust Buster&apos; tool, which is a specialized mechanical agitator, to break up these thick solid layers. This makes the sludge more liquid and easier for the vacuum truck to pump out effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Cq3zoN7kfI</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10808-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ar9G5JWAK7g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Septic Tank and Clean Lid — Septic System Maintenance</video:title>
      <video:description>With the test port lid removed, the video shows the open port, allowing a direct view into the septic tank. You can observe the sewage (indicated by toilet water flushing) draining into the tank, confirming the system&apos;s function and providing an opportunity for visual inspection of the tank&apos;s contents, such as scum or sludge levels. The removed lid, which is likely covered in accumulated sludge and debris, should be placed into a bucket filled with water to begin soaking and facilitate cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ar9G5JWAK7g</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10809-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8BDBsLYbYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Consult Professional Septic Services — Septic System Maintenance</video:title>
      <video:description>For tasks requiring specialized knowledge, such as septic system design, installation, pumping, or complex servicing, always seek assistance from a qualified professional. You can often find certified experts through local associations or directories, such as the &apos;Find a Professional&apos; directory mentioned in the video. Remember, when it comes to your septic system, choosing the cheapest option isn&apos;t always the best approach, as quality of service directly impacts the system&apos;s longevity and your home&apos;s safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8BDBsLYbYI</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10809-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Cq3zoN7kfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pump Out Sludge — Septic System Maintenance</video:title>
      <video:description>Once the sludge has been thoroughly agitated and liquefied by the &apos;Crust Buster&apos;, insert the large diameter suction hose from the septic pump truck into the sludge tank. Ensure the hose reaches the bottom of the tank to remove as much solid material as possible. Activate the pump truck to begin vacuuming out the sludge and effluent. Monitor the pumping process to ensure efficient removal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Cq3zoN7kfI</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10809-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8BDBsLYbYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pump Septic Tank Regularly and Monitor Sludge — Septic System Maintenance</video:title>
      <video:description>Regularly pump out your septic tank to remove accumulated sludge and scum. The frequency of pumping depends on your household&apos;s usage, typically ranging from every three to five years. When a professional pumper services your tank, ask them to record the depth of the sludge layer. This information allows you to monitor your system&apos;s waste accumulation rate and make informed decisions about future pump-out schedules, promoting proactive maintenance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8BDBsLYbYI</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10810-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ybeEpLYsS14/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Septic Tank Opening — Septic System Maintenance</video:title>
      <video:description>After the old lids are removed, thoroughly clean the concrete rim of the septic tank opening. This involves removing any surrounding soil, debris, and especially any tree roots that may have grown into the area, using tools like a shovel or a pickaxe. Once larger debris is cleared, use a wire brush to scrub the concrete ring to ensure a clean, smooth surface. Finally, use a powerful shop vacuum, such as the Craftsman Wet/Dry 17 Gallon model shown, to suck up all remaining dirt, dust, and small particles, ensuring the surface is pristine for the new adapter ring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ybeEpLYsS14</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10811-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8BDBsLYbYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure and Maintain Access Lids — Septic System Maintenance</video:title>
      <video:description>Ensure all septic system access lids are easily accessible for maintenance and inspection, but most importantly, securely fastened to prevent accidental entry. These lids should ideally include a safety screen underneath to prevent small animals or children from falling into the tank. This is a critical safety measure for any household with a septic system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8BDBsLYbYI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10811-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open Septic Tank Lids — Septic System Maintenance</video:title>
      <video:description>Once the septic tank lids are exposed, carefully remove them to access the tank&apos;s chambers. The video demonstrates using a tool, possibly a small pickaxe or lid lifter, to pry open the lids. Special attention is required for the outlet side lid, as irrigation lines may be closely situated. The operator carefully shimmies off the lid to avoid breaking these lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10811-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j5ORNB1Yp3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Filter and Lid — Septic System Maintenance</video:title>
      <video:description>Once the filter is clean, carefully reinsert it back into the septic tank. Ensure it slides smoothly into its designated slot and the T-handle is properly aligned and seated. Next, retrieve the septic lid. Notice that the lid has small grooves or indentations around its edge. These grooves must align with the corresponding screw holes in the septic tank frame. Once aligned, place the screws back into their holes and use the impact driver to tighten them. Remember not to over-tighten, as the lid is made of plastic, and snug is sufficient.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j5ORNB1Yp3g</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10812-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-prDWaoX6Vc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill and Landscaping — Septic System Maintenance</video:title>
      <video:description>Using the wheelbarrow, backfill the excavated area around the newly installed septic riser with the previously removed soil. Gently compact the soil to remove large air pockets, but avoid excessive force that could damage the riser. Then, apply a layer of fresh topsoil, spread grass seed (such as EZ Seed), or lay sod over the area to blend the riser into the surrounding landscape. Finally, water the newly backfilled and seeded/sodded area thoroughly to promote growth and help the soil settle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-prDWaoX6Vc</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10812-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0Z5KAIuMIBQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill and Finish — Septic System Maintenance</video:title>
      <video:description>After the risers are installed and the lids are secured, the final step is to backfill the excavated areas with the displaced dirt. The presenter smooths out the soil around the newly installed risers. He suggests that the grass will eventually grow back over the area. Alternatively, grass seed can be applied for faster regrowth. This leaves the septic tank access points level with the ground, making future pumping significantly easier without the need for extensive digging.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0Z5KAIuMIBQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10812-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VtBRSJP48xU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Layered Backfilling and Compaction Technique — Septic System Maintenance</video:title>
      <video:description>Begin the backfilling process by adding soil around the septic tank and into the trench in approximately 12-inch layers. After each 12-inch layer of soil is added, it must be thoroughly compacted. The video demonstrates the use of a mechanical Wacker compactor for this task, but a manual soil compactor, which can be purchased from hardware stores like Home Depot, can also be used. This meticulous process ensures there are no large settling pockets in the future, which could cause structural damage to the tank or pipes. This step focuses on the technique and reasoning, not the full execution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VtBRSJP48xU</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10813-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/br0kPtOchzE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Recognize Symptoms of Septic System Failure — Septic System Maintenance</video:title>
      <video:description>Begin by identifying common symptoms of a failing septic system. These may include toilets flushing slower than usual, unpleasant sewage odors in the yard, and visible water pooling in the area above your leach field or drain field. These signs indicate that the system is not properly absorbing effluent.</video:description>
      <video:player_loc>https://www.youtube.com/embed/br0kPtOchzE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10813-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dzEP9hhE7bk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Drain Field Failure — Septic System Maintenance</video:title>
      <video:description>Dominic elaborates on drain field failure. He points out that if there&apos;s standing water or a &apos;swampy&apos; area around the septic system, especially after heavy rain, it&apos;s a clear sign that the drain field is saturated and can no longer absorb water. In such cases, the water from the septic tank has nowhere to go but to back up, potentially into the house, such as a bathtub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dzEP9hhE7bk</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10813-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b4PnEBB1LUw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visually Inspect for Standing Water — Septic System Maintenance</video:title>
      <video:description>The inspector uses a flashlight to illuminate the interior of the enlarged holes. The key observation is the presence of standing water within the holes, specifically noted as being at least 12 inches deep in several locations. This standing water indicates that the drain field is oversaturated and failing to properly absorb and disperse wastewater into the surrounding soil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b4PnEBB1LUw</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10792-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/byAyBIc0JoY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify if You Need a Permit — Deck Construction</video:title>
      <video:description>Before starting any deck construction, it is crucial to determine if a building permit is required. Local planning divisions have different regulations, so it is advisable to check with your local council or relevant planning authority. This initial step ensures compliance with local building codes and avoids potential legal issues or demolition orders later on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/byAyBIc0JoY</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10792-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GI70mvXBIic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Local Building Codes and Planning — Deck Construction</video:title>
      <video:description>Before beginning any physical work, understand and comply with local building codes. Building codes vary significantly by region, state, county, and even city or township, though they are generally based on the International Building Code. It is crucial to contact your local building authority and inspector with your deck plans to ensure they meet all requirements. Key elements that can vary by code include post sizes, the span distance between beam posts, and the size and span of joists. Consulting a resource like the &apos;Deck Codes &amp; Standards&apos; book from Black &amp; Decker, which simplifies complex code information, is highly recommended. This initial planning step ensures the structural integrity and legality of your deck project.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GI70mvXBIic</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10792-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/v79flY1pIKk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Permits and Utility Lines — Deck Construction</video:title>
      <video:description>Begin your deck project by contacting your local building department and homeowners association to inquire about necessary permits and specific building requirements that apply to your area. This ensures your project complies with all regulations. Furthermore, it is critical to call 811 before any digging begins to have all underground utility lines marked. This prevents accidental damage to water, gas, or electrical lines and ensures a safe work environment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/v79flY1pIKk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10793-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ij8dmeG-l2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan the Deck Layout and Consult Building Codes — Deck Construction</video:title>
      <video:description>Begin the deck planning process by drawing the desired shape and proportion of the deck. Crucially, determine the orientation of the decking, as this will influence joist placement. Always refer to relevant building codes and guides, such as the &apos;Prescriptive Residential Wood Deck Construction Guide&apos; (DCA 6), to ensure compliance and structural soundness. This initial planning helps to accurately determine material needs and proper spacing for all structural components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ij8dmeG-l2U</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10793-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QsPQM6JPZJ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Your Deck and Prepare Timber — Deck Construction</video:title>
      <video:description>Before starting construction, it&apos;s crucial to plan the deck&apos;s location and design. Consider factors like shade, privacy, and ground conditions. If choosing a permanently shady spot, be prepared for annual cleaning and treatment of the wood to prevent dampness and algae. Avoid overly wet areas entirely. Sketch your deck to scale on paper, being as precise as possible with measurements. This helps minimize cutting and material waste. Remember that any deck higher than 300mm off the ground typically requires planning permission. When building, use structural treated timber and always apply two coats of preservative to all holes and cut ends of the wood to protect against rot and insects.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QsPQM6JPZJ8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10793-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4W7PpUYPT0s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Research and Plan the Deck — Deck Construction</video:title>
      <video:description>Begin by conducting thorough research and planning for your deck project. Consult resources such as the &quot;Ultimate Guide to Decks: Plan / Design / Build&quot; book for general knowledge and specialized websites like decks.com for free design plans, design tools, and material cost calculators. The presenter also highly recommends watching instructional videos on YouTube to gather practical tips and skills. Once sufficient information is gathered, sketch out your deck plan on quad-ruled notebook paper, detailing the placement of every board, beam, and connection. This detailed drawing will help in creating a comprehensive materials list.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4W7PpUYPT0s</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10794-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eiZoCH5SMPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dig Footings and Set Anchoring Hardware — Deck Construction</video:title>
      <video:description>After the ledger board is installed, mark the locations for the deck&apos;s support posts. Dig holes for the footings, ensuring they are at least 42 inches deep (or below the frost line in your area) and wide enough to accommodate 12-inch diameter Sonotubes. Insert the Sonotubes into the holes, ensuring they are level, and pour concrete into them. Before the concrete sets, embed J-bolts and post bases (e.g., Simpson Strong-Tie) into the wet concrete, ensuring they are perfectly centered and level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eiZoCH5SMPI</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10794-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nwW_mW_iRrk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Footing Locations and Square the Deck — Deck Construction</video:title>
      <video:description>With the ground leveled, the next step is to accurately mark the locations for the deck&apos;s footings. This involves re-establishing precise perimeter lines using the batter boards and string lines, ensuring the deck will be square to the house. The &apos;3-4-5 method&apos; (or a scaled version like 9-12-15 feet for larger decks) is used to verify squareness by measuring the diagonal. Once the perimeter is confirmed, individual footing locations are marked, typically 16 inches away from the house and spaced at approximately 4.5-foot intervals along the beams. These marks guide the placement of the auger for drilling. Before any digging commences, it&apos;s essential to call 811 to locate underground utilities.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nwW_mW_iRrk</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10794-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XtRdyoX-cqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Layout and Digging Footings — Deck Construction</video:title>
      <video:description>Using a tape measure, accurately mark out the perimeter of the planned deck and the locations for the footings. Drive stakes into the ground at these marked points to create a visual guide. Then, use a compact excavator (mini excavator) with a 25-inch bucket to dig the footing holes. The holes should be 36 inches deep and 25 inches wide to accommodate the Sonotube concrete forms. Clean up the edges of the holes with a shovel to ensure a comfortable fit for the Sonotubes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XtRdyoX-cqQ</video:player_loc>
      <video:duration>193</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10795-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SUxS4QJpeiU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pour Concrete Footings — Deck Construction</video:title>
      <video:description>Mix concrete according to the manufacturer&apos;s directions, typically in a wheelbarrow. Fill each form tube approximately halfway with the mixed concrete. Use a shovel or a 2x4 to &apos;vibrate&apos; the concrete and remove any trapped air pockets, which helps prevent voids and ensures strength. Then, fill the remainder of the tube with concrete, leaving the top surface smooth. Carefully embed an anchor bolt into the wet concrete, ensuring it&apos;s plumb and no more than an inch of its thread is showing. Backfill around the form tubes with gravel to provide stability and keep them in place while the concrete cures. Allow the concrete to cure fully according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SUxS4QJpeiU</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10795-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hMbhJlvsuk4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pour Concrete and Finish Footing Tops — Deck Construction</video:title>
      <video:description>Begin pouring concrete into the footing holes, carefully ensuring that the rebar cage remains centered and doesn&apos;t shift. As the holes are filled, place short, cylindrical cardboard forms, such as 12-inch QUIK-TUBE Building Forms, at the very top of each footing. These forms serve to help level the concrete surface and create a cleaner, more uniform appearance for the top of the footing. While full-length forms can be used, utilizing shorter sections allows the concrete to directly connect with the surrounding soil, which can potentially reduce the chance of footing movement. Once the concrete is poured to the top of the form, use a concrete float or trowel to smooth and shape the surface. Float the concrete in a circular motion to create a slightly convex (domed) top. This subtle slope helps water drain off the footing, preventing pooling and protecting the future post base from moisture damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hMbhJlvsuk4</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10795-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jk8Tt_Eyumk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pour Concrete Footings and Install Anchors — Deck Construction</video:title>
      <video:description>After placing the Sonotube forms, rocks are added to the bottom of each hole to ensure proper drainage and prevent water buildup. Next, bags of Quikrete 5000 concrete mix are prepared. The dry mix is poured into a large tub, followed by the addition of water. The concrete is thoroughly mixed with a shovel until a consistent, workable consistency is achieved. The mixed concrete is then shoveled into each Sonotube form, ensuring it fills the form completely. Finally, a post base anchor is inserted into the wet concrete at the top of each footing, carefully leveled using a spirit level, and secured in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jk8Tt_Eyumk</video:player_loc>
      <video:duration>166</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10796-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eiZoCH5SMPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Deck Posts — Deck Construction</video:title>
      <video:description>Once the concrete footings are cured, measure and cut 6x6 pressure-treated posts to the exact height required to meet the deck frame at the desired level, with a slight pitch away from the house for drainage. Place the cut posts into the post bases and use a level to ensure they are plumb. Fasten the posts to the post bases according to the manufacturer&apos;s instructions, typically using specialized fasteners or nails.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eiZoCH5SMPI</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10796-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MtViNAQUn08/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing Support Posts with Post Bases — Deck Construction</video:title>
      <video:description>Once the concrete footings have been poured and cured, the next phase of construction involves installing the support structure for the deck. This typically includes pressure-treated wooden support posts, the ledger board, and the support beams, all installed simultaneously to ensure the deck is level. To secure the support posts, a hole is first drilled into the center of the cured concrete footing. An expandable bolt is then inserted into this hole. A metal post base connector is placed over the bolt, which often features a flat plate to lift the wood off the concrete, preventing moisture accumulation. A washer and nut are then used to securely fasten the post base. Finally, a pressure-treated wooden post is set into the post base connector, ready to support the beams.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MtViNAQUn08</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10796-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hMbhJlvsuk4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Post Bases and Set Posts — Deck Construction</video:title>
      <video:description>Once the concrete footings have fully cured and reached adequate strength, proceed to attach metal post bases to the top of each footing. These bases are typically secured using 6-inch concrete anchors that are drilled and fastened into the cured concrete. Ensure that each post base is correctly aligned and plumb before permanently anchoring it. After the bases are securely attached, carefully set the wooden posts into position within the metal bases. Secure the posts to the bases using appropriate fasteners, such as screws or bolts, as recommended by the post base manufacturer. It is highly advisable to have this work inspected by your local building department, as they often have specific requirements for inspecting footings and post installations before further construction proceeds.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hMbhJlvsuk4</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10797-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XtRdyoX-cqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing the Ledger Board — Deck Construction</video:title>
      <video:description>Attach a 2x10 pressure-treated ledger board directly to the house&apos;s exterior. Crunch the numbers beforehand to ensure that the top surface of your finished decking will be approximately 1 inch below the house&apos;s threshold. The builder mentions he learned this from a previous mistake of assuming 3/4 inch decking. Secure the ledger board to the house&apos;s rim joist or wall studs using lag bolts, following a staggered pattern (e.g., 15 inches on center, in a &apos;W&apos; pattern) for maximum holding power. For areas that require extra weather protection, especially against moisture intrusion, apply a house wrap (e.g., Tyvek) or similar flashing tape along the house framing before attaching the ledger.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XtRdyoX-cqQ</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10797-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GID4f0QAWMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attaching the Ledger Board — Deck Construction</video:title>
      <video:description>The first step in construction is to attach a ledger board to the home&apos;s exterior. This board provides a crucial attachment point for the deck, helping with weight distribution and securely connecting the deck to the house. Typically, 2x12 or 2x10 pressure-treated lumber is used for ledger boards, depending on the deck&apos;s size. Before attaching, install Protecto Wrap or a similar flashing product between the ledger board and the house to protect against moisture. Secure the ledger board using lag bolts, ensuring a strong and safe connection. The video shows two workers installing a 2x12 ledger board, first using a nail gun for temporary attachment, then securing it with bolts and a wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GID4f0QAWMw</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10797-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LmdFqKOgy1Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Ledger Board and Drip Edge — Deck Construction</video:title>
      <video:description>Install the ledger board directly to the house. First, measure and mark the desired height for the ledger board along the house wall. Use a level to ensure the mark is perfectly horizontal. Secure the ledger board to the house framing using Simpson Strong-Tie SDWS Timber Screws, which are designed to be drilled directly without pre-drilling or the need for nuts and bolts. Confirm that the ledger board is perfectly level before fully tightening. After the ledger board is in place, install a drip edge (metal flashing) along its top edge. This drip edge should be carefully tucked under the existing siding of the house to create a barrier that prevents any moisture or rain from getting behind the ledger board and causing damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LmdFqKOgy1Q</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10798-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PkvKO8GchyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble and Secure Beams — Deck Construction</video:title>
      <video:description>Construct the main support beams for the deck. The video demonstrates creating beams by nailing two 2x8 pieces of lumber together. Use four 10-penny galvanized nails every 16 inches, staggering them, to firmly join the two boards. Once the beams are assembled, place them on top of the installed posts. Use metal brackets (such as post-to-beam connectors) to secure the beams to the posts. Before fully securing, use a tape measure to double-check the diagonal measurements of the beam layout. This ensures that your beams are perfectly square. Once confirmed, nail the metal brackets to both the posts and the beams, ensuring every pre-drilled hole in the brackets is filled with a nail for maximum stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PkvKO8GchyE</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10798-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XtRdyoX-cqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Setting Main Support Beams — Deck Construction</video:title>
      <video:description>With the post bases secured, position the main support beams (6x10s) onto the posts. The beams are 20 feet long and will be seamed together to cover the 30-foot width of the deck. Use appropriate Simpson Strong-Tie hardware, specifically angle brackets and structural screws, to connect the beams to the posts and to each other where they seam. Use a circular saw to make any necessary cuts to the beams for precise fitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XtRdyoX-cqQ</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10798-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1I9ZCz5k_44/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Main Support Beams — Deck Construction</video:title>
      <video:description>With the posts set and protected, and string lines established, the main support beams are installed. These beams are lifted and carefully positioned onto the ledger boards and between the posts, ensuring they align perfectly with the string lines for level and straight placement. For existing beams that are slightly higher than the new string line, a grinder is used to carefully trim down the top surface of the wood or any protruding fasteners to match the desired level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1I9ZCz5k_44</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10799-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XtRdyoX-cqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing Floor Joists and Blocking — Deck Construction</video:title>
      <video:description>Position the 2x10 pressure-treated floor joists into the installed joist hangers on the ledger board, running perpendicular to the house and resting on the main support beam. Secure the joists to the hangers using 3-inch exterior-grade nails. At the main beam, back-nail the joists by driving nails or screws through the side of the joist into the beam for added lateral stability. The main beam is designed to handle the vertical load, so no hangers are needed on this side. Once joists are installed, cut and fit blocking between them along the perimeter of the deck. This blocking provides a solid attachment point for the perimeter decking boards and prevents lateral movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XtRdyoX-cqQ</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10799-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SFNaKDkbkQs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Floor Joists and Blocking — Deck Construction</video:title>
      <video:description>With the main beams and ledger board (if applicable) securely in place, proceed to install the floor joists. These are the numerous parallel pieces of lumber clearly visible in the video, typically 2x8 or 2x10 treated lumber, which will support the deck surface. Install the joists perpendicular to the main beams and typically parallel to the house. Attach them to the ledger board (if used) and the outer perimeter beams using appropriate joist hangers and specialized hanger nails or structural screws. It&apos;s crucial to maintain consistent spacing between joists, commonly 12, 16, or 24 inches on center, as specified by local building codes and the type of decking material you plan to use. After installing the joists, install blocking or bridging between them at regular intervals (usually at the midpoint of spans greater than 8 feet) to enhance the stability of the frame and prevent joists from twisting over time. Use a framing square to ensure all connections are perfectly square.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SFNaKDkbkQs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10799-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WOGaS19VZ8Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Joists and Joist Hangers — Deck Construction</video:title>
      <video:description>Install joists typically at 16-inch intervals on center, but always verify this against your local building codes. Before securing them permanently with joist hangers, use a pneumatic air gun to tack the joists to the ledger board. This ensures they are correctly positioned. Once tacked, install the joist hangers. These hangers are crucial for holding the deck&apos;s framing in place. Connect the joist hanger to the ledger board first, then use a drill to screw through the joist hanger, through the joist, and finally into the ledger board for a robust connection. Torque head bits are recommended for this step as they are less prone to stripping and provide a better bite.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WOGaS19VZ8Q</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10800-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tdISH1ooSYc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Composite Decking Boards — Deck Construction</video:title>
      <video:description>Before laying the main decking boards, install any perimeter trim or starter strips. The video shows a black trim piece installed along the edge of the house, which serves as a clean starting point and edge. Secure this trim using screws. Next, place the first composite decking board against the house, carefully aligning it. Use a cordless drill/driver to secure the board with appropriate composite deck screws or hidden fasteners, ensuring they are flush or slightly countersunk. Continue by laying subsequent composite decking boards, using spacers or hidden clips for consistent gaps between boards. Tap each board with a rubber mallet to ensure a snug fit before fastening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tdISH1ooSYc</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10800-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GI70mvXBIic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Deck Boards and Trim Joists — Deck Construction</video:title>
      <video:description>Install the deck boards over the joist framework. These deck boards were wet when installed, so they were placed tightly together. As the wood dries, it will naturally shrink, creating a quarter-inch gap between boards. This gap is ideal for water runoff and proper drainage. Use appropriate exterior-grade deck screws to fasten the deck boards to the joists. Ensure to use two screws per joist for each board. To create a clean, finished edge, leave the joists long during initial installation. Once all deck boards are screwed down, dry-fit the last two deck boards and mark the ends of the joists, subtracting 1 1/2 inches (the thickness of the rim joist). Then, cut all the joists to this marked length using a circular saw, ensuring the final deck board and rim joist will sit perfectly flush.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GI70mvXBIic</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10800-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PkvKO8GchyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Decking Boards — Deck Construction</video:title>
      <video:description>Install the decking boards, starting from the house and working your way outward. Before fastening, pre-drill and countersink all holes near the edges of the boards to prevent the wood from splitting. Then, secure the deck boards by driving two exterior-grade screws into each joist they cross, typically every 16 inches. As you lay the boards, periodically stop (e.g., every fourth board) and measure the width of the installed decking near the house and at the far end of the deck. This helps ensure that your deck boards are remaining square and parallel as you progress. If working with wet, pressure-treated lumber, push the boards snugly against each other. They will shrink slightly as they dry, naturally forming small gaps for drainage. If using dry boards, you&apos;ll need to intentionally add an 1/8-inch gap between each board as you install them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PkvKO8GchyE</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10801-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PkvKO8GchyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Build and Install Railing Posts — Deck Construction</video:title>
      <video:description>Begin by preparing the posts for the railings. Railing construction is subject to strict building codes, particularly concerning height, attachment methods, and baluster spacing. Always confirm these requirements with your local inspector. To create a clean look, cut a decorative notch into the railing posts where the horizontal rails will sit. Use a circular saw with the blade set to 1.5 inches deep to make several parallel relief cuts within the notch area. Break out the waste wood with a hammer, then clean and refine the notch using a chisel and a block plane for a smooth finish. Once notches are complete and posts are cut to the required height (with a 45-degree bevel on top for aesthetics), lay out their positions along the deck perimeter, ensuring they meet minimum spacing codes. Drill pilot holes for carriage bolts, checking that each post is plumb and square before drilling the second hole. Insert carriage bolts, with washers and nuts, and tighten them down with a wrench to secure the posts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PkvKO8GchyE</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10801-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WOGaS19VZ8Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Railing Posts and Spindles — Deck Construction</video:title>
      <video:description>Determine the desired height of your handrailing, measuring from the top of the notch on the posts. Cut the railing posts to be an inch shorter than the final desired handrail height, as the handrail itself will sit on top. To ensure consistent spacing for the spindles (balusters), use a 3-inch wooden block as a spacer between each spindle. This eliminates the need for repeated tape measure use and ensures a precise, uniform look for your railing. Once the posts are cut and positioned, secure them to the deck frame, ensuring they are level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WOGaS19VZ8Q</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10801-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nRBgIe-ApTU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Railings and Balusters — Deck Construction</video:title>
      <video:description>Now that the posts are attached and decking is installed, you can begin constructing the railings. Use 2x4 lumber for both the top and bottom rails. Attach the bottom rail along the backside of the posts, ensuring it is 3-1/2 inches from the deck surface. Secure the top rail flush with the top of the posts, also on the backside. Use screws to firmly attach the rails to the posts at each joint. For a neat, finished appearance, center a 5/4 x 6 inch rail cap on top of the top rail, mitering the corners where sections meet to create clean seams. To install the balusters, use a scrap piece of 2x4 lumber as a consistent spacer to ensure even gaps between them. Drill pilot holes into each end of the balusters, then secure them with screws to both the top and bottom rails.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nRBgIe-ApTU</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10802-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bog0TDqtUfA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Build and Install Deck Stairs — Deck Construction</video:title>
      <video:description>Construct the stair stringers, which are the main angled supports for the stair treads. These are carefully measured and cut from sturdy lumber to ensure proper rise and run for each step. The stringers are then securely attached to the main deck frame at the top and supported by a solid foundation (e.g., concrete pad or ground-level framing) at the bottom. Risers (vertical boards between treads) are then added to the stringers, creating the enclosed structure of the stairs. This step highlights the precise framing required for safe and functional stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bog0TDqtUfA</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10802-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PKUS77duDqk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Build and Attach Stairs — Deck Construction</video:title>
      <video:description>For convenient pool access, add stairs to the deck. Begin by cutting another treated 2x6 board and screwing it securely to the 4x4 posts where the stairs will connect to the deck. This provides a solid attachment point. Level the ground where the stairs will rest and place several pavers to support the bottom of the stair stringers, ensuring stability. Use pre-made stair stringers, which can be purchased from stores like Home Depot, to simplify the process. Hold the stair stringers in place against the deck and mark where adjustable stringer connectors will be attached. Use galvanized adjustable stringer connectors, like the Simpson Strong-Tie LS0Z, which are designed specifically for stairs. Attach these connectors using their specialized galvanized hex screws, first to the 2x6 board on the deck and then to the stringer. Repeat for the second stringer, ensuring both are level with each other. For the stair treads, cut five-quarter decking boards to the desired width and screw two of them onto each tread, butting them up against each other. Finally, cut and install one decking board for each riser (the vertical piece between each tread).</video:description>
      <video:player_loc>https://www.youtube.com/embed/PKUS77duDqk</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10802-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZmaJT2I4GKY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Multi-Level Deck Steps — Deck Construction</video:title>
      <video:description>Construct and install steps that provide access from ground level to the various deck elevations. This involves cutting stringers (the angled structural supports) to the correct rise and run for each step, then securely attaching them to the deck frame and a stable foundation at ground level. Apply composite decking boards to form the treads (the horizontal walking surface) and, if desired, risers (the vertical face of the step). Ensure consistent dimensions for all steps for safety. The video shows multi-level steps, indicating varying heights and transitions, likely utilizing the &apos;matching end grains&apos; and &apos;Cortexed&apos; fastening methods for a cohesive look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZmaJT2I4GKY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10803-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/P6rSJuaU6T0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stain or Sealer — Deck Construction</video:title>
      <video:description>With the deck completely clean and dry, it is now ready for a protective finish. Apply a high-quality deck stain or sealer according to the manufacturer&apos;s instructions. Choose a product that offers UV protection and water repellency to prolong the life and beauty of your resurfaced deck. Apply the finish evenly using a roller, brush, or sprayer, working in small sections and following the wood grain. Allow adequate drying time between coats if multiple coats are recommended. This final step protects the newly exposed wood from weather, rot, and UV damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/P6rSJuaU6T0</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10803-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hQbGVHgtS9E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Stain the Entire Deck — Deck Construction</video:title>
      <video:description>Apply a protective and decorative stain to all new and existing wood surfaces of the deck and railing. Thoroughly clean the deck before staining, ensuring it is free of dirt, dust, and mildew. Use a paint brush, roller, or stain pad to apply the stain evenly. The video shows a person applying brown stain to the deck boards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hQbGVHgtS9E</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10803-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GID4f0QAWMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Protecting the Deck with Stain and Sealer — Deck Construction</video:title>
      <video:description>The final step in completing your new deck is to properly protect it from the elements. Apply a combination stain and sealant product to the entire wooden surface of the deck. This type of product not only enhances the wood&apos;s natural grain and beauty but also provides crucial protection against damage from sun and rain. Use a paintbrush for edges and hard-to-reach areas, and a paint roller for broader surfaces to ensure even coverage. This protective layer will extend the life of your deck and reduce the frequency of maintenance. The video shows a person using an Olympic Elite Advanced Stain + Sealant in One product, applying it with a paintbrush and then a roller.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GID4f0QAWMw</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10804-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XImjl3-6TbI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Clean-up and Inspection — Deck Construction</video:title>
      <video:description>Once all the deck boards have been installed, the project moves to final clean-up and inspection. Thoroughly sweep or rake the entire area, removing any sawdust, wood scraps, tools, and construction debris. Inspect the deck surface for any sharp edges, splintered wood, or proud screw/nail heads that could be a safety hazard. Address any such issues by sanding, planing, or driving fasteners flush. The completed ground-level deck provides an attractive and functional extension of the living space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XImjl3-6TbI</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10804-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bY3J0YutsXs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Trim and Final Cleanup — Deck Construction</video:title>
      <video:description>Conduct a final inspection of all installed fascia, trim, decking, and railing. Make any necessary adjustments or apply touch-ups to ensure a seamless and professional appearance. Ensure all fasteners are secure and no sharp edges or protruding elements are exposed, which could cause injury. Clean the entire deck surface of any construction debris, dust, or sawdust, leaving the area tidy and ready for the homeowner to use and enjoy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bY3J0YutsXs</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10804-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZmaJT2I4GKY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Review and Project Cleanup — Deck Construction</video:title>
      <video:description>Conduct a thorough final review of the entire composite deck system, including all decking surfaces, benches, steps, and handrails. Check for any loose fasteners, uneven surfaces, or any remaining unfinished details. Ensure all components are structurally sound, safe, and comply with any relevant building codes. After the final inspection, perform a comprehensive cleanup of the construction site, removing all tools, excess materials, and debris. The presenter mentions &apos;buttoning this up tomorrow,&apos; indicating these final stages of completion and cleanup are being finalized.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZmaJT2I4GKY</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10784-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SRNjf4-F9Tg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Power to AC Unit — AC System Maintenance</video:title>
      <video:description>Before working on any electrical appliance, ensure all power is completely shut off. First, locate your main breaker box (often outside near the meter) and flip the circuit breaker labeled for your &apos;AC&apos; or &apos;A/H&apos; (air handler) to the &apos;Off&apos; position. Next, go to the AC unit itself and locate the outdoor electrical disconnect box. Open its cover and pull out the disconnect switch (a black plastic block that states &apos;On/Off&apos;) to fully isolate the unit from power.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SRNjf4-F9Tg</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10784-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJrNMPx_JyI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power to AC Units — AC System Maintenance</video:title>
      <video:description>For safety, it is crucial to turn off the power to both the indoor and outdoor AC units before beginning any maintenance. Locate the corresponding circuit breaker in your home&apos;s breaker box and switch it off for the indoor unit. For the outdoor unit, identify and turn off its dedicated on-off switch, which is typically found near the unit itself. This prevents accidental startup and electrical hazards while working on the system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJrNMPx_JyI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10784-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M3NYdZIzx2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power to AC Unit — AC System Maintenance</video:title>
      <video:description>To begin, ensure complete safety by disconnecting all power to the AC condenser unit. First, locate and switch off the corresponding circuit breaker inside your house. Next, proceed to the outdoor unit&apos;s disconnect box and pull out the breaker or switch it to the &apos;OFF&apos; position. Confirm that the power is completely off before proceeding with any further steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M3NYdZIzx2U</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10785-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/peymGz_8BkA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check and Replace Indoor Air Filter — AC System Maintenance</video:title>
      <video:description>Move to the indoor unit (air handler). Locate the media filter cabinet, typically near where the return air duct connects to the unit. Open the access panel and pull out the old air filter. Inspect its condition; if it&apos;s dirty (not white/gray as new), it needs replacement. Insert a new filter, ensuring the &apos;airflow&apos; arrow on the filter points in the direction of the furnace or air handler.</video:description>
      <video:player_loc>https://www.youtube.com/embed/peymGz_8BkA</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10785-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MtQOxvsnzkA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Change Your Air Filter — AC System Maintenance</video:title>
      <video:description>Locate the air filter slot in your HVAC system, which is usually found in the return air duct or within the furnace unit itself. Note the direction of the airflow arrow printed on the filter frame. Slide out the old, dirty filter and replace it with a new, clean air filter of the correct size and MERV rating. Ensure the airflow arrow on the new filter points in the same direction as the old filter. Properly dispose of the old air filter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MtQOxvsnzkA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10785-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1O1DGre8xK8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Change Air Filter — AC System Maintenance</video:title>
      <video:description>While you&apos;re near the AC unit, take the opportunity to check and change the air filter. Locate the air filter compartment, typically a slot near the air handler or return vent. Pull out the old, likely dirty air filter, noting its size (e.g., 20x20x1 inches). Replace it with a new, clean air filter of the same size, ensuring it&apos;s oriented correctly according to the airflow arrows printed on the filter frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1O1DGre8xK8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10786-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pzDNFuiAESE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deep Clean Condenser Unit — AC System Maintenance</video:title>
      <video:description>Before cleaning the condenser unit, consult your manufacturer&apos;s guidelines to avoid voiding your warranty. Crucially, turn off all power to the outdoor condenser unit. This is typically done at the external A/C disconnect switch located near the unit, or at the main circuit breaker panel inside your home. Remove the top grill or fan guard of the unit; the method for this varies by manufacturer, often involving unscrewing a few bolts with a screwdriver or wrench. Carefully reach into the unit and remove any large debris such as leaves, twigs, or dirt by hand or with a shop vacuum. Inspect the delicate metal fins for any minor bends or damage. Use a fin tool to gently straighten any bent fins, being careful not to damage them further. Next, take an AC coil cleaner, such as WEB Coil Cleaner, and liberally spray it onto the fins from the inside of the unit outwards. Allow the cleaner to sit and foam for about 10 minutes. After 10 minutes, use a garden hose to rinse the cleaner through the fins from the inside to the outside, ensuring the dirt and grime are flushed out. Do not use a pressure washer, as it can easily damage the fins. Finish by rinsing the outside of the unit. Once clean, reassemble the top grill/fan guard and secure it. Finally, restore power to the unit by flipping the disconnect switch or circuit breaker back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pzDNFuiAESE</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10786-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1yPk4OideMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Outdoor Condenser Coils — AC System Maintenance</video:title>
      <video:description>Clean the outdoor condenser unit&apos;s coils. First, turn off the power to the condenser unit at the outdoor disconnect switch for safety. Use a specialized alkaline condenser coil cleaner, such as Nu-Brite Condenser Coil Cleaner, mixed with water according to the dilution chart on the product. Spray the cleaner thoroughly onto the condenser coils, ensuring it penetrates inside. Allow the cleaner to penetrate and foam for 5-10 minutes, then rinse it off with a hose until the water runs clear. The cleaner will lift away dirt, grime, and grease that accumulate, improving the unit&apos;s ability to dissipate heat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1yPk4OideMM</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10786-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rpANlj_leho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Outdoor Unit Coils and Drain — AC System Maintenance</video:title>
      <video:description>Regularly clean the outside air intake grill of the outdoor unit by hand or with a brush to remove debris. Additionally, use a garden hose to clean the condenser coil, spraying water gently from the outside towards the inside of the unit to dislodge dirt and leaves. Finally, inspect and clean the condensate drain, which is typically a small PVC pipe protruding from the side of the unit, especially at the beginning and end of the cooling season. Use a thin, flexible wire or a similar tool to clear any blockages, as a clogged drain can lead to water damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rpANlj_leho</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10787-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0eQ43CVKICk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Examine Refrigerant Line Connections — AC System Maintenance</video:title>
      <video:description>Examine the refrigerant line set, including the liquid and suction lines, connecting the outdoor unit to the indoor unit. Specifically, check the connections at the service valves on the outdoor unit for any signs of refrigerant leaks (e.g., oil residue). Ensure the suction line is properly insulated to prevent condensation and maximize efficiency. Verify that the service valves are in their fully open position (unless a specific service procedure requires otherwise).</video:description>
      <video:player_loc>https://www.youtube.com/embed/0eQ43CVKICk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10787-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EdOYlbVDd74/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Refrigerant Line Temperatures — AC System Maintenance</video:title>
      <video:description>With the cooling system running, locate the refrigerant lines leading into the outdoor unit. There should be two lines: a larger insulated &apos;suction line&apos; and a smaller &apos;liquid line&apos; (which might also be insulated). After the system has been running for a while (e.g., 5-10 minutes), the larger suction line should feel cold to the touch, and the smaller liquid line should feel hot. You can use your infrared thermometer to measure the exact temperatures and observe the differential, but simply feeling the lines by hand can give a good indication of whether the system is properly charged and functioning. A significant temperature difference between the two lines (cold suction, hot liquid) suggests proper refrigerant flow and heat exchange.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EdOYlbVDd74</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10787-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/n3d6aKaB5Qg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Suction Line for Condensation — AC System Maintenance</video:title>
      <video:description>Locate the two refrigerant lines that connect to your outdoor air conditioning unit. Identify the thicker of the two lines, which is referred to as the &apos;suction line&apos;. This line might be covered with insulation, which may be torn. If so, gently pull back any insulation to expose the copper pipe underneath. Place your fingers on the exposed suction line; it should feel icy cold and wet with condensate (sweating). If it is, this indicates that your freon level is likely at or very close to the correct level, and a freon problem is probably not the issue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/n3d6aKaB5Qg</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10788-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1yPk4OideMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Indoor Evaporator Coils — AC System Maintenance</video:title>
      <video:description>Access the indoor blower unit, typically located in an attic or utility closet, to clean the evaporator coils. Before doing so, turn off the AC system at the thermostat. Use an &apos;Evap Foam No Rinse&apos; evaporator coil cleaner, such as Nu-Calgon&apos;s product. Spray the foam directly onto the evaporator coils. The foam will expand, encapsulate dirt, and then condense into a liquid that drains through the unit&apos;s condensate pan, eliminating the need for rinsing. Cleaning these coils is essential to prevent ice buildup and ensure efficient cooling of the air circulating through your home.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1yPk4OideMM</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10788-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3DdrRYyLv18/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Evaporator Coil and Ductwork — AC System Maintenance</video:title>
      <video:description>With the evaporator A-coil now exposed, perform a thorough visual inspection. Examine both sides of the A-coil for any signs of heavy dirt, dust, lint, pet hair, or mold buildup on the fins and tubing. The video notes this unit is almost 20 years old. Also, inspect the inside of the surrounding ductwork for cleanliness and any obstructions. Pay close attention to the heat exchangers (the copper tubes that carry refrigerant) for any signs of cracks, pinholes, or corrosion. Check the drain pan located beneath the coil for water accumulation, sludge, or blockages, which could indicate a problem with the condensate drain line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3DdrRYyLv18</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10788-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJrNMPx_JyI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Evaporator Coil — AC System Maintenance</video:title>
      <video:description>Move to the indoor unit to clean the evaporator coil. You may need a drill to remove screws securing the access panel. Once the evaporator coil door is open, carefully dust the coils with a duster to remove loose particles. Then, spray the coils thoroughly with a commercially available no-rinse evaporator coil cleaner (e.g., AC Flow Evaporator Coil Cleaner, as seen in the video). The cleaner will foam up, liquefy dirt, and drip into the drain pan below. Be sure to periodically clean the drain pan with a mixture of hot water, soap, and a small amount of bleach to prevent mildew and blockages.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJrNMPx_JyI</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10789-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pzDNFuiAESE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Vents for Obstructions — AC System Maintenance</video:title>
      <video:description>Walk through your home and inspect all supply and return air vents. Look for any furniture, rugs, curtains, or other household items that might be obstructing the grilles. Ensure that there is nothing blocking the airflow into or out of these vents, as obstructions can significantly reduce the efficiency of your air conditioning system and lead to uneven cooling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pzDNFuiAESE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10789-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HXxmq2PqACA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear HVAC Vents — AC System Maintenance</video:title>
      <video:description>Ensure all supply and return air vents throughout your home are fully open and clear of any obstructions such as furniture, rugs, or drapes. Blocked vents restrict the proper distribution and return of air, forcing your HVAC system to work harder and potentially leading to inefficient heating or cooling and increased energy consumption.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HXxmq2PqACA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10789-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MtQOxvsnzkA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open Your Vents — AC System Maintenance</video:title>
      <video:description>Walk through your home and identify all heating and cooling vents (registers) in each room that are connected to your HVAC system. Ensure that all vents are fully open by adjusting their louvers and are completely unobstructed by furniture, rugs, or any other items. Vents should remain open to allow proper airflow throughout your home, ensuring even temperature distribution and efficient operation of your HVAC system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MtQOxvsnzkA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10790-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kUo1Kw3aSM4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Monthly Condensate Drain Line Cleaning — AC System Maintenance</video:title>
      <video:description>For monthly maintenance, locate the cleanout opening on the condensate drain line, typically a T-joint with a removable cap. Remove the cap to expose the drain line. Pour 1 to 2 cups of white vinegar down the drain line. This vinegar will travel through the primary drain line and out to the exterior drip line of the house, helping to dissolve algae and mold buildup. Allow the vinegar to sit in the line for about 5 to 10 minutes. Follow the vinegar with hot water to flush out any remaining debris and ensure the line is clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kUo1Kw3aSM4</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10790-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/peymGz_8BkA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Condensate Drain Line — AC System Maintenance</video:title>
      <video:description>The condensate drain line, including the P-trap, can become clogged with algae and sludge. First, inspect the P-trap by removing its cap (if present). If it&apos;s dirty, manually clear it using a zip tie or a small brush to push out any buildup. Pour some water down the line to ensure it flows freely. Alternatively, if your drain line has a flush valve, attach a nitrogen tank (with regulator and hoses) or an air compressor to it. Turn the valve so the arrow points away from the system, attach the hose, and push pressurized air to clear the line. If a union is present, disconnect it, direct the pressure into the pipe, and cap the vertical pipe to prevent water from coming back at you. Recharge the P-trap with water after flushing by pouring water into the cleanout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/peymGz_8BkA</video:player_loc>
      <video:duration>183</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10790-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8UvT6v-Tq6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear the Condensate Drain Line — AC System Maintenance</video:title>
      <video:description>With the problem confirmed, you can attempt to clear the clog. Start by carefully using your finger to feel for and remove any visible debris or sludge from the drain opening located in the condensate pan. Next, locate the condensate drain line, which is typically a white PVC pipe. The video suggests gently pushing downward on the drain line, especially at the P-trap (a U-shaped bend in the pipe), to dislodge any internal blockages. This manual intervention can often resolve minor clogs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8UvT6v-Tq6E</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10791-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yzX2MOmI7ik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Set Thermostat — AC System Maintenance</video:title>
      <video:description>Return to your breaker box and flip the HVAC breaker back to the &apos;on&apos; position to restore power to the system. Once power is restored, go back to your thermostat. Set the thermostat to your desired mode (either &apos;cool&apos; or &apos;heat&apos;) and then dial it to your preferred temperature setting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yzX2MOmI7ik</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10791-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fufqIrp1m8s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test AC System Functionality — AC System Maintenance</video:title>
      <video:description>After the unit is fully reassembled and power is restored, go inside your home and set your thermostat to &apos;Cool&apos; mode, lowering the temperature significantly below the current room temperature. This will activate the AC system. Listen for the outdoor unit to turn on and run smoothly. Verify that cool air is coming from your indoor vents. This final step confirms that the AC unit is functioning properly and that your cleaning efforts have improved its performance and efficiency.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fufqIrp1m8s</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10791-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZqBo5z351yQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Test the Unit — AC System Maintenance</video:title>
      <video:description>Once the coils are clean and any necessary elevation adjustments are made, carefully replace the fan assembly onto the top of the condenser unit, securing it with the previously removed screws or fasteners. Reinsert the T-handle disconnect into the power box, ensuring it is fully seated. Then, return to your home&apos;s main electrical panel and switch on all the breakers associated with the AC unit. Finally, test the unit by turning on your air conditioning. The fan should start spinning and the unit should begin cooling. This final check confirms that all steps were completed correctly and the unit is functioning as intended, indicating successful maintenance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZqBo5z351yQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10782-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e42OOnatZvs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Align and Install Carpet Stair Tread — install stair treads over splitting LVP on square-nosed stair</video:title>
      <video:description>Begin by taking one pre-made carpet stair tread and positioning it on the first wooden stair. Carefully align the front edge of the carpet tread with the front edge of the stair. Ensure the tread is centered horizontally on the step, leaving an even gap on both sides. Once the tread is perfectly aligned, firmly press it down onto the stair surface, working from the front edge towards the back. This action activates the adhesive backing or secures the non-slip material integrated into the tread, ensuring it adheres securely to the wooden stair. Repeat this process for each subsequent stair, maintaining consistent alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e42OOnatZvs</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10782-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — install stair treads over splitting LVP on square-nosed stairs</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10782-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — install stair treads over splitting LVP on square-nosed stairs</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10781-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — install stair treads over splitting LVP on square-nosed stairs</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10781-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — install stair treads over splitting LVP on square-nosed stairs</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10781-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — install stair treads over splitting LVP on square-nosed stairs</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10771-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9cSqoY_1zRs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Lawn Preparation — Lawn Renovation</video:title>
      <video:description>Begin by preparing the lawn area. This involves mowing the existing grass to a short height to allow new seeds to receive adequate sunlight. Following mowing, use a garden rake to clear away any dead grass, thatch, or debris, ensuring a clean surface. For areas with compacted soil, use a garden fork to aerate by pushing the tines into the ground and gently wiggling to create small holes, which improves drainage and root penetration for new grass.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9cSqoY_1zRs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10771-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3t-JcXRpA4Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Site by Removing Weeds — Lawn Renovation</video:title>
      <video:description>The first crucial step involves physically removing all existing weeds from the backyard area. This ensures that new grass seed won&apos;t have to compete with established weeds for nutrients and space. After clearing the weeds, it&apos;s important to assess the existing soil to ensure it&apos;s suitable for growing a new lawn. This might involve checking for compaction, drainage issues, or obvious nutrient deficiencies, although the video primarily focuses on weed removal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3t-JcXRpA4Q</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10771-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2xzq5Jp2uxo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Soil — Lawn Renovation</video:title>
      <video:description>Good soil preparation is highlighted as crucial for establishing a new lawn. Begin by thoroughly preparing the soil: clear away any existing debris, vegetation, or weeds from the area. If a weed killer is used, it is essential to consult and follow the manufacturer&apos;s instructions to determine the required waiting period before proceeding with sowing the new lawn. After clearing, dig over the soil using a digging fork, meticulously breaking down any large lumps. Simultaneously, remove any stones or roots encountered during the digging process to ensure a clean and even bed for the grass seeds.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2xzq5Jp2uxo</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10772-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NVSjCy046tM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Soil — Lawn Renovation</video:title>
      <video:description>A well-prepared soil surface is crucial for success. Begin by thoroughly removing any weeds or debris from the area. Then, use a rake or a garden fork to turn the soil, breaking up any large clumps to create a smooth surface for the seeds to settle. For compacted soil, consider using a cultivator. You can choose between a manual cultivator (like a hand tiller with multiple prongs) or a powered version (such as a Ryobi 36V HP Brushless Tiller/Cultivator) to effectively loosen the soil and prepare it for planting. Finally, use a soil spreader or the back of a rake to level out the surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NVSjCy046tM</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10772-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KqnfX9MuwX4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Soil for Seed to Soil Contact — Lawn Renovation</video:title>
      <video:description>The first crucial step is to prepare the bare soil to ensure proper seed-to-soil contact. Use a cultivator, specifically a &apos;Garden Weasel&apos; as demonstrated, to thoroughly loosen the top layer of soil. Work the cultivator over the entire bare area to break up any compacted soil. This creates a suitable environment for the seeds to settle, be protected, stay moist, and develop roots.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KqnfX9MuwX4</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10772-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ewFRavOuYHU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Soil Bed — Lawn Renovation</video:title>
      <video:description>Before planting, prepare the soil thoroughly. Begin by manually removing any weeds and debris from the planting area. You can use your hands, wearing garden gloves, or a small weeding tool. Once cleared, loosen the soil using a rake or a garden fork to a depth of at least 2-3 inches. For larger areas, a tiller, such as the Ryobi Cultivator, can be used to efficiently break up and aerate the soil, creating a smooth and even surface that is conducive to seed germination and root development.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ewFRavOuYHU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10773-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1ILTTQESvjI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level the Soil — Lawn Renovation</video:title>
      <video:description>Once the soil has been rotary hoed and cleared of weeds, it&apos;s crucial to level the ground. Spread new topsoil or compost evenly across the entire area, using shovels and a wheelbarrow to distribute it. Then, use rakes and a specialized levelling tool (like a soil screed) to ensure a perfectly flat and even surface. This prevents puddles and promotes uniform grass growth. Use string lines or a laser level to guide the levelling process for precision.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1ILTTQESvjI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10773-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9geTqHwopOw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Soil Bed — Lawn Renovation</video:title>
      <video:description>Begin by thoroughly forking over the entire area of soil using a garden fork to loosen compacted earth and improve aeration. Next, use a landscape rake to break down any large clods of soil and carefully remove any large stones or debris that could hinder grass growth. Continue raking until the soil is fine and relatively level. Once the surface appears even, firm the ground by walking over it in short, shuffling steps. This removes air pockets and creates a solid foundation. Finally, use the landscape rake again to gently re-rake the entire area, breaking up any footprints and leaving a perfectly fine, smooth seedbed. For an even finer finish and to remove any remaining small stones or weeds, use a metal rake.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9geTqHwopOw</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10773-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F3x3UAvVbpE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level the Applied Topsoil — Lawn Renovation</video:title>
      <video:description>Once the topsoil has been applied, use a lawn leveling rake to spread and smooth the material. This specialized rake, often available commercially or as a DIY creation, effectively levels wider areas. It is designed to float over existing grass while allowing the soil to settle into the lower spots, ensuring an even grade without pulling up too much turf.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F3x3UAvVbpE</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10774-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yeh7rB7mJEU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Grass Types and Select Seed — Lawn Renovation</video:title>
      <video:description>The creator explains that his grass, tall fescue, does not spread on its own, meaning any dead or thin spots will not naturally fill in and require reseeding. He emphasizes the importance of choosing the correct grass type for your climate zone (cool-season in New Jersey, requiring tall fescue). He then explains how to select quality grass seed by examining the seed label. Key indicators of high-quality seed are low percentages of &apos;Other Crop Seed&apos; and &apos;Weed Seed&apos;, ideally 0% for both, to avoid introducing unwanted plants into your lawn. He also highlights the importance of a recent &apos;Test Date&apos; on the seed bag to ensure good germination rates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yeh7rB7mJEU</video:player_loc>
      <video:duration>190</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10774-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EjhleF5b9qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose the Right Grass Seed — Lawn Renovation</video:title>
      <video:description>The video introduces the benefits of overseeding, such as touching up bare spots, thickening the turf, and blocking weeds. It then moves into selecting the appropriate grass seed. Considerations include your region&apos;s weather, the conditions in your yard (e.g., sun exposure, foot traffic), and the specific grass types (Fescue, Ryegrass, Kentucky bluegrass, Bermuda, St. Augustine, Zoysia). The easiest way to choose is to check the seed mixture&apos;s label. The video emphasizes choosing high-quality seed, highlighting products like Ace Green Turf and Scotts Turf Builder, as these have higher germination rates and fewer weed seeds. Seed with moisture control, such as Scotts Turf Builder with WaterSmart Plus coating technology, is also recommended as it absorbs more water and feeds to jumpstart growth, making watering less of a hassle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EjhleF5b9qs</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10774-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XYCuUbLy2Nc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choosing the Right Grass Seed — Lawn Renovation</video:title>
      <video:description>Choose grass seed based on your lawn&apos;s specific conditions. For quick germination and soil stabilization, select a &apos;Quick&apos; blend containing annual ryegrass, Kentucky bluegrass, and fescue. For shaded areas, a &apos;Shady&apos; blend (primarily fescue) is suitable. Avoid using weed-and-feed products or crabgrass preventers when seeding, as these will kill new grass seeds.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XYCuUbLy2Nc</video:player_loc>
      <video:duration>112</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10775-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XJU271VjiQ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Grass Seed — Lawn Renovation</video:title>
      <video:description>Fill the handheld spreader with the chosen grass seed. Adjust the spreader&apos;s dial to approximately halfway to ensure a good, even distribution. While walking steadily across the prepared area, squeeze the trigger and continuously spin the handle to broadcast the seed evenly over the soil. For larger areas, a rotary spreader can be used, with its settings determined by the instructions provided on the grass seed bag for optimal coverage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XJU271VjiQ0</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10775-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ewFRavOuYHU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Spread Grass Seeds — Lawn Renovation</video:title>
      <video:description>Now it&apos;s time to sow the grass seeds. For even distribution, load your chosen grass seeds into a hand-held spreader, such as the &apos;Scotts Easy Hand-Held Spreader&apos;. Operate the spreader evenly over the entire prepared area, following the manufacturer&apos;s recommendations for application rates. This ensures that the seeds are distributed uniformly, preventing overly dense or sparse patches in your new lawn.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ewFRavOuYHU</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10775-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KPNgaHfvIW8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sow the Grass Seed — Lawn Renovation</video:title>
      <video:description>Next, sow your grass seed. For small areas, you can broadcast the seed by hand, ensuring even distribution. For larger areas, use a broadcast spreader or a smaller hand spreader for more uniform coverage. Aim to distribute the seeds so they are about 1/4 to 1/2 inch apart, avoiding both overly thick and overly sparse application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KPNgaHfvIW8</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10776-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XJU271VjiQ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ensure Seed-to-Soil Contact — Lawn Renovation</video:title>
      <video:description>After the grass seed has been spread, use a rake to lightly brush the seed into the very top layer of the soil. This action is critically important for establishing what is known as &apos;seed-to-soil contact,&apos; a fundamental requirement for successful germination. Furthermore, gently raking helps to more evenly distribute any seed that may have fallen too densely or too sparsely in certain spots, creating a more uniform seed bed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XJU271VjiQ0</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10776-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sa4DRw3yDDw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lightly Rake Seeded Areas — Lawn Renovation</video:title>
      <video:description>After applying the seed, lightly rake the area using a flexible wire rake. This action ensures good seed-to-soil contact, which is vital for germination. Be careful not to apply too much pressure or bury the seeds too deep; a slight covering is sufficient. The goal is to gently work a small amount of soil over the seeds to protect them from washing away, being eaten by birds, or drying out, while still allowing them access to sunlight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sa4DRw3yDDw</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10776-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xl4mlZy0Ixw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lightly Rake Seed into Soil — Lawn Renovation</video:title>
      <video:description>After applying the grass seed, take a wire rake and very lightly drag it across the seeded area. The goal is to barely cover the seeds with a small amount of soil, not to bury them deeply. This process helps achieve optimal seed-to-soil contact, which is crucial for successful germination and root establishment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xl4mlZy0Ixw</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10777-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hXc63ZWWqOQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Starter Fertilizer — Lawn Renovation</video:title>
      <video:description>The final step before watering is to apply a specialized &apos;starter fertilizer&apos; over the newly covered seeds. The speaker explicitly warns against using regular &apos;adult&apos; lawn fertilizer, as it is too strong for new grass and can &apos;burn&apos; or kill the delicate seedlings. Apply a very small amount of the starter fertilizer evenly over the patch. This step is optional and depends on your specific soil conditions, as healthy soil might not require it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hXc63ZWWqOQ</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10777-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VT73LKxPiWo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Starter Fertilizer — Lawn Renovation</video:title>
      <video:description>Immediately after seeding, apply a starter fertilizer using the same broadcast spreader. It&apos;s crucial to use a starter fertilizer, such as Lesco Professional Starter Fertilizer (Triple 19, like 19-19-19), as these formulations are designed to promote root development in new seedlings without burning the delicate new grass. Standard fertilizers can be too strong and harm emerging grass.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VT73LKxPiWo</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10777-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bZwXj879ZVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Starter Fertilizer — Lawn Renovation</video:title>
      <video:description>Load a starter fertilizer (such as Scotts Starter Fertilizer) into the broadcast spreader. Starter fertilizers are high in phosphate, which is crucial for promoting strong root growth in new seedlings. Apply the starter fertilizer evenly across the entire newly seeded area using the same techniques as for the grass seed application (edge pass then main passes).</video:description>
      <video:player_loc>https://www.youtube.com/embed/bZwXj879ZVE</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10778-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9cSqoY_1zRs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Seeded Area — Lawn Renovation</video:title>
      <video:description>Once the seeds are incorporated and firmed, it&apos;s crucial to water the lawn. You can either use a garden hose with a fine spray nozzle or rely on natural rainfall to initiate the germination process. The key is to keep the seeded area consistently moist, especially during the initial germination period, without overwatering. Overwatering can wash away seeds or lead to fungal growth, while insufficient moisture will prevent germination.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9cSqoY_1zRs</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10778-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HYE76Ds9RHU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Seeded Area — Lawn Renovation</video:title>
      <video:description>The final crucial step after applying grass seed and top dressing is to water the area. It is important to water the newly seeded lawn thoroughly to encourage germination. You can either actively water the area with a water hose (using a gentle spray setting to avoid washing away seeds) or rely on natural rainfall if it&apos;s anticipated shortly after seeding. Consistent moisture is vital for grass seeds to sprout and establish healthy roots.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HYE76Ds9RHU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10778-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wTn8ygnspDo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Newly Seeded Lawn — Lawn Renovation</video:title>
      <video:description>Immediately after seeding, thoroughly water the entire lawn. Be very careful to use a gentle watering method, such as a mist setting on a hose nozzle, to avoid disrupting the newly laid seeds. Ensure the top layer of soil remains consistently moist.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wTn8ygnspDo</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10779-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ewFRavOuYHU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Establish and Enjoy the Lawn — Lawn Renovation</video:title>
      <video:description>Once the grass seeds have been sown and watered, it is crucial to avoid walking on the newly seeded lawn. Foot traffic can displace seeds, compact the soil, and hinder the germination and establishment process. Continue to maintain consistent moisture in the soil until the grass seedlings emerge and are well-established. Within four to six weeks, your efforts should result in a beautiful, lush new lawn. Regular maintenance, such as proper watering and timely mowing, will ensure its continued health and beauty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ewFRavOuYHU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10779-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KFALK1L5ny0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Monitor and Maintain Growth — Lawn Renovation</video:title>
      <video:description>Continue watering the patched area lightly twice a day to keep it damp until the grass germinates and establishes. You should begin to see grass peaking through in about two weeks, and it will be well established in approximately three weeks. To further aid growth, it&apos;s recommended to keep traffic off the newly seeded area. If you have pets, consider placing a small fence around the patch to prevent them from disturbing the young grass. Remember to choose the correct seed mix for your area, whether it&apos;s sun, shade, or a combination, as the amount of sunlight affects growth speed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KFALK1L5ny0</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10779-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IKfg52HdfgE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water and Care for New Grass Seed — Lawn Renovation</video:title>
      <video:description>After spreading the grass seed, the presenter emphasizes crucial aftercare steps. He advises thoroughly watering the newly seeded area immediately after application. He also recommends staying off the newly seeded lawn for at least a couple of weeks to allow the seeds to sprout and establish without disturbance. He notes that sprouts should typically appear within one to two weeks, and the lawn can be mowed approximately four weeks later, stressing the importance of allowing &quot;Mother Nature to take its course.&quot;</video:description>
      <video:player_loc>https://www.youtube.com/embed/IKfg52HdfgE</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10780-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2xzq5Jp2uxo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform First Mowing — Lawn Renovation</video:title>
      <video:description>Once your new grass has grown to a height of 5 to 8 centimeters (approximately 2 to 3 inches), it is ready for its first mowing. When mowing for the first time, use your lawn mower set to its highest possible setting. This ensures that you only trim the very tips of the new grass blades, allowing the roots to continue developing without stress. Before you begin, always make sure that the grass is completely dry, as mowing wet grass can lead to uneven cuts, clumping, and potential damage to the young lawn.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2xzq5Jp2uxo</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10780-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NVSjCy046tM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>First Mow and Weed Management — Lawn Renovation</video:title>
      <video:description>As your grass starts to grow, avoid walking on it until it is well established. Once the grass reaches a height of about 5 to 8 cm (approximately 2 to 3 inches) tall, you can give it its first mow. When mowing, make sure to only trim a small amount off the top; never cut more than one-third of the blade height at a time to avoid stressing the young grass. In the weeks that follow, keep an eye on any weeds that pop up and remove them promptly to prevent them from competing with your new lawn. At around 4-6 weeks after sowing, consider applying a low-dose fertilizer to support continued healthy growth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NVSjCy046tM</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10780-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m8vmEj0qt-Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>First Mow of the New Lawn — Lawn Renovation</video:title>
      <video:description>Once the new grass reaches a height where it starts to flop over on itself (around 2 to 2.5 inches for perennial ryegrass, approximately 1.5 weeks after seeding), it&apos;s time for the first mow. Use a reel mower, as its scissor-like action provides a clean cut without lifting or pulling the delicate new grass blades. Alternatively, a lightweight battery-powered rotary mower with a high cutting height can be used, ensuring it doesn&apos;t actually cut but merely presses the grass to create stripes and avoid ruts. Aim for smooth turns to prevent damaging the young turf. The gentle nature of the reel mower or a high-set battery mower is crucial to avoid stressing the new seedlings and promoting healthy growth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m8vmEj0qt-Q</video:player_loc>
      <video:duration>4910</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10768-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — install treads on a curved staircase</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10768-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for First Winder Step — install treads on a curved staircase</video:title>
      <video:description>Begin by taking a roll of kraft paper and unrolling it onto the second winder step (the first winder step to be templated). Line up one straight edge of the paper along the back edge of the tread, against the riser of the next step. Use an electric stapler to secure the paper in the middle of the riser, making sure the paper is flat and conforms to the step&apos;s shape. Fold the paper neatly around the nosing (the front edge of the step) and along the side edge of the winder. Secure it again with staples in the middle, ensuring staples are placed where they will be covered by the finished carpet runner and do not damage the visible part of the stairs if they were real finished stairs. Use a utility knife to carefully cut along the edges of the step, forming the exact shape of the winder tread and riser. This creates the first paper template. The presenter mentions that on actual stairs, the nosing would be thicker than the demo stairs, and emphasizes care when using the knife to avoid damaging the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>108</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10768-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for Second Winder Step — install treads on a curved staircase</video:title>
      <video:description>Repeat the templating process for the next winder step using a fresh piece of kraft paper. This involves aligning the paper, securing it with staples, folding it around the nosing and side edges, and cutting it to the exact shape of the step. As with the previous template, mark the runner&apos;s width, center line, and straight edges. Crucially, ensure that the measurements (e.g., 28 inches wide) for the runner remain consistent across all winder steps to maintain a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10770-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — install treads on a curved staircase</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10770-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — install treads on a curved staircase</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10770-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hwZQcHGafM0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Tread Dimensions for Curved Sections — install treads on a curved staircase</video:title>
      <video:description>After placing the pre-cut nosing in position, the installer makes new marks along the edges where the tread will meet the wall and the nosing. He uses a measuring tape to measure the dimensions, such as 5 inches on one side and 10 and 5/8 inches on the other, for the long board. To ensure a straight cut line between these two points, he applies diagonal tape and then marks the line with a pencil using a beam level as a guide. This method helps account for any irregularities in the wall or the staircase itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hwZQcHGafM0</video:player_loc>
      <video:duration>269</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10769-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for First Winder Step — install treads on a curved staircase</video:title>
      <video:description>Begin by taking a roll of kraft paper and unrolling it onto the second winder step (the first winder step to be templated). Line up one straight edge of the paper along the back edge of the tread, against the riser of the next step. Use an electric stapler to secure the paper in the middle of the riser, making sure the paper is flat and conforms to the step&apos;s shape. Fold the paper neatly around the nosing (the front edge of the step) and along the side edge of the winder. Secure it again with staples in the middle, ensuring staples are placed where they will be covered by the finished carpet runner and do not damage the visible part of the stairs if they were real finished stairs. Use a utility knife to carefully cut along the edges of the step, forming the exact shape of the winder tread and riser. This creates the first paper template. The presenter mentions that on actual stairs, the nosing would be thicker than the demo stairs, and emphasizes care when using the knife to avoid damaging the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>108</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10769-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for Second Winder Step — install treads on a curved staircase</video:title>
      <video:description>Repeat the templating process for the next winder step using a fresh piece of kraft paper. This involves aligning the paper, securing it with staples, folding it around the nosing and side edges, and cutting it to the exact shape of the step. As with the previous template, mark the runner&apos;s width, center line, and straight edges. Crucially, ensure that the measurements (e.g., 28 inches wide) for the runner remain consistent across all winder steps to maintain a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10769-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m0TM4PCC8Tw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Creating Custom Templates for Each Step — install treads on a curved staircase</video:title>
      <video:description>First, use painter&apos;s tape to mark the desired outline of the carpet runner on the stair treads, particularly around the quarter round and edges. Then, unroll the brown paper over the first tread and secure it temporarily with painter&apos;s tape. Use a pencil or marker to meticulously trace the exact shape of the stair tread onto the paper. Once traced, cut out the paper template with scissors or a utility knife. Repeat this process for all six pie-shaped steps, carefully numbering each template to maintain order. Secure the templates in place with a hammer stapler to prevent movement while tracing and cutting. Remember to account for the orientation of each step when numbering and preparing the templates, as they will be flipped for cutting the carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m0TM4PCC8Tw</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10764-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — how to measure your stairs for carpet treads</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10764-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — how to measure your stairs for carpet treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10764-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — how to measure your stairs for carpet treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10766-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — how to measure your stairs for carpet treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10766-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — how to measure your stairs for carpet treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10766-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — how to measure your stairs for carpet treads</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10765-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — how to measure your stairs for carpet treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10765-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — how to measure your stairs for carpet treads</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10765-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IOgUldDtg1c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet — how to measure your stairs for carpet treads</video:title>
      <video:description>Measure the width of the stair tread from stringer to stringer (e.g., 36 1/8 inches) and the depth from the nose to the back riser (e.g., 13 inches). To allow for trimming and a snug fit, cut the carpet pieces slightly larger than these measurements (e.g., 37 inches wide by 14 inches deep). Use a utility knife and a straight edge to ensure clean, straight cuts. You will need one carpet piece per tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IOgUldDtg1c</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10767-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — how to measure your stairs for carpet treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10767-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — how to measure your stairs for carpet treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10767-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — how to measure your stairs for carpet treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10761-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c7jak2TlfDA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Bullnose Stair — measure stairs for bullnose treads</video:title>
      <video:description>Begin by measuring the total length and width of the bullnose stair. First, measure from the inside corner of the wall around the bullnose curve to the outer corner, bending the tape measure around the nose. This measurement is 28 inches. Next, measure the length of the entire stair, wrapping the tape measure along the base where the carpet will be installed. This measurement is 57 inches. Finally, measure the width of the stair tread, which is 29 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c7jak2TlfDA</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10761-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs for bullnose treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10761-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YAi3vAulu7A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit Bullnose and Measure for Tread Planks — measure stairs for bullnose treads</video:title>
      <video:description>Test fit the cut bullnose piece on the stair tread, ensuring its small lip correctly catches over the front of the riser for a snug fit. This bullnose has approximately a 1/2-inch overlap onto the tread. With the bullnose in place, measure the remaining depth from the live edge of the bullnose (the finished surface, not including the part that locks into the plank) to the back of the tread against the riser. Remember that most houses are not perfectly square, so measure this distance at both ends of the tread. Manufacturers often recommend a 3/8-inch expansion gap between the flooring plank and the back riser. Account for this when determining the final plank width to be cut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YAi3vAulu7A</video:player_loc>
      <video:duration>142</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10763-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZrWNkbh5j4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Carpet Treads — measure stairs for bullnose treads</video:title>
      <video:description>It is crucial to properly position each carpet tread on the hardwood stair for both safety and aesthetics. Ensure a gap of approximately 0.5 to 1 inch is left between the front edge of the carpet tread and the bullnose (the protruding front edge) of the stair. This gap is vital to prevent any tripping hazards when ascending or descending the stairs. For consistent alignment and ease of installation, butt the back edge of the carpet tread flush against the riser (the vertical part of the stair).</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZrWNkbh5j4M</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10763-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nCu4uIwBOOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Carpet Pads — measure stairs for bullnose treads</video:title>
      <video:description>Prepare a carpet pad for each stair tread. The depth of the pad should be the depth of the tread plus three additional inches. The width of the pad should be two inches narrower than the width of the runner. Measure, mark, and cut the carpet pad according to these dimensions. Then, cut off the two front corners of each pad at 45-degree angles. Use the first cut pad as a guide to cut as many additional pads as needed for your staircase. Center the pad on the bottom tread, aligning its long edge with the riser. Leave a fingertip width space between the pad and the riser. Place a staple in the center and on both sides of the pad to secure it. Smooth the pad over the tread and over the nose (the front edge of the tread). Pull it tight, then staple the pad to the underside of the nose. Repeat this process until all treads are covered with padding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nCu4uIwBOOE</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10763-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Stair Tread Padding — measure stairs for bullnose treads</video:title>
      <video:description>Begin by placing a pre-cut piece of carpet padding onto a stair tread. Ensure it fits snugly on the flat surface of the tread. Use a hammer tacker to securely attach the padding to the wooden step. Apply multiple staples around the perimeter and in the center to prevent the padding from shifting or bunching up over time. Ensure the padding is tight before moving to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10762-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure stairs for bullnose treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10762-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure stairs for bullnose treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10762-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YAi3vAulu7A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit Bullnose and Measure for Tread Planks — measure stairs for bullnose treads</video:title>
      <video:description>Test fit the cut bullnose piece on the stair tread, ensuring its small lip correctly catches over the front of the riser for a snug fit. This bullnose has approximately a 1/2-inch overlap onto the tread. With the bullnose in place, measure the remaining depth from the live edge of the bullnose (the finished surface, not including the part that locks into the plank) to the back of the tread against the riser. Remember that most houses are not perfectly square, so measure this distance at both ends of the tread. Manufacturers often recommend a 3/8-inch expansion gap between the flooring plank and the back riser. Account for this when determining the final plank width to be cut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YAi3vAulu7A</video:player_loc>
      <video:duration>142</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10754-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PFOFt7QiWsA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Dishwasher Filter — Dishwasher Filter Cleaning</video:title>
      <video:description>Begin by opening your dishwasher. Locate the filter assembly, which is typically a round component situated at the bottom of the dishwasher, often near the spray bar. This specific dishwasher is a Whirlpool, but the filter location and removal process are similar across many different makes and models.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PFOFt7QiWsA</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10754-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QbXEe7_0GOw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate the Dishwasher Filter — Dishwasher Filter Cleaning</video:title>
      <video:description>To locate the filter, open the dishwasher door and pull out the bottom rack. The filter is typically located at the bottom of the dishwasher tub, usually under the lower spray arm. Initially, you might see a screen or grid, but the actual filter component is underneath this visible screen. On most machines, the filter will have a handle or a section that can be turned counter-clockwise to unlock it. The video shows an arrow indicator on the screen to guide the user in which direction to turn.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QbXEe7_0GOw</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10754-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/T43vZjUwICQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access the Dishwasher Filter — Dishwasher Filter Cleaning</video:title>
      <video:description>To access the filter assembly, first, fully open the door of the LG dishwasher. Once the door is down, locate the lower dish rack and carefully pull it all the way out of the dishwasher tub. This provides an unobstructed view of the filter located at the bottom center of the tub.</video:description>
      <video:player_loc>https://www.youtube.com/embed/T43vZjUwICQ</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10755-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3ONSoFb1x5o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Fine Filter Assembly — Dishwasher Filter Cleaning</video:title>
      <video:description>Once the fine filter nut is removed, simply lift the entire fine filter assembly straight up and out of the dishwasher tub. Take note of a small spoke on the underside of the filter that aligns with an opening in the drain filter at the back of the tub. This will help with the alignment during installation of the new filter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3ONSoFb1x5o</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10755-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qjk5eSGDiPE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Filter and Mesh Screen — Dishwasher Filter Cleaning</video:title>
      <video:description>With the lower dish rack removed, identify the lower spray arm. Rotate the spray arm to ensure it is positioned away from the filter assembly, allowing sufficient room for removal. Next, grasp the cylindrical filter and turn it counter-clockwise. This motion will release the filter. Lift the entire filter assembly, including the fine mesh screen, straight out of the dishwasher. Once removed, carefully separate the cylindrical filter component from the larger fine mesh screen.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qjk5eSGDiPE</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10755-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QbXEe7_0GOw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Dishwasher Filter — Dishwasher Filter Cleaning</video:title>
      <video:description>Once located, grasp the handle or grid section of the filter and turn it counter-clockwise, following any indicated arrows. You should feel a slight unlock or click. After unlocking, carefully lift the filter upwards to remove it from its housing. Be prepared, as the filter might be heavily soiled, especially if it has never been cleaned before. The video shows a filter caked with white, slimy buildup and food debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QbXEe7_0GOw</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10756-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zyqCOmHte9U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean/Install Fine Mesh Filter — Dishwasher Filter Cleaning</video:title>
      <video:description>If cleaning the old filter, use warm soapy water and a brush to thoroughly remove any food particles or debris from both the fine mesh and large particle filters. If replacing, prepare the new filter. To reinstall the fine mesh filter, carefully place it back into the well at the bottom of the dishwasher sump, ensuring it sits flat and is properly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zyqCOmHte9U</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10756-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zyqCOmHte9U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Fine Mesh Filter — Dishwasher Filter Cleaning</video:title>
      <video:description>With the large particle filter removed, you can now access the fine mesh filter located underneath it. Simply reach into the sump area, take hold of the fine mesh screen, and lift it straight out of the dishwasher. This filter is responsible for trapping finer food particles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zyqCOmHte9U</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10756-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QDZ2W3AT68Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove dishwasher filter assembly — Dishwasher Filter Cleaning</video:title>
      <video:description>Locate the removable filter assembly at the bottom of your dishwasher. This assembly typically consists of a coarse filter and a finer mesh filter. To remove it, turn the outer ring counter-clockwise and then lift the entire assembly out.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QDZ2W3AT68Y</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10757-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0a7nLLxbqXk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Filter Components — Dishwasher Filter Cleaning</video:title>
      <video:description>Take all the removed filter components (filter cover, coarse filter, and fine filter) to a sink. Use a dish brush and a generous amount of dish soap to thoroughly scrub all surfaces of each component. Pay close attention to mesh areas and crevices where food particles, grease, and residue accumulate. Rinse each component thoroughly under running water until all soap and debris are removed and the water runs clear. Ensure there are no visible blockages or residues left.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0a7nLLxbqXk</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10757-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JlH2WtxCf2k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Filter Components — Dishwasher Filter Cleaning</video:title>
      <video:description>Take all removed filter components to a sink. Use warm running water to thoroughly rinse each part, removing any trapped food particles, grease, or residue. For stubborn debris, a soft brush (like an old toothbrush) can be used. While cleaning, inspect all filter parts for any visible signs of damage, such as cracks, tears in the mesh, or warping. If any damage is found, the filter or its damaged components should be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JlH2WtxCf2k</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10757-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NW3asK4epk4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble and Rinse Filter Parts — Dishwasher Filter Cleaning</video:title>
      <video:description>Once removed, you&apos;ll likely notice that the filter is composed of two parts that twist apart. Separate these components. Take the individual filter parts to a sink and use running water, preferably with good pressure, to rinse off any large pieces of food debris, slime, or gunk. This initial rinse will remove the bulk of the build-up before deep cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NW3asK4epk4</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10758-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-ThIFyp_p0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Filters — Dishwasher Filter Cleaning</video:title>
      <video:description>Take both filter parts to a sink and rinse them thoroughly under hot water. For any stubborn food particles or grime that do not rinse off easily, use a soft-bristled toothbrush to gently scrub the mesh and perforated areas. It is crucial to avoid using abrasive materials or harsh tools, as these can damage the delicate filter components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-ThIFyp_p0g</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10758-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kxRDs3GrdEk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Filter Components — Dishwasher Filter Cleaning</video:title>
      <video:description>Take all three separated filter components and rinse them thoroughly under hot running water. If you notice any stubborn food particles or debris still adhering to the mesh or plastic parts, use a soft-bristle toothbrush to gently scrub them away. It&apos;s important to clean all surfaces, including the coarse metal filter, as debris can accumulate everywhere. Avoid using any abrasive cleaning materials, as these can damage the delicate mesh of the filter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kxRDs3GrdEk</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10758-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/61sED-ABR28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wash Filters — Dishwasher Filter Cleaning</video:title>
      <video:description>Take both the ultra-fine filter and the fine filter to a kitchen sink. Rinse them thoroughly under warm, running water. Apply a small amount of dish soap to a sponge and gently scrub both filters to remove any stubborn food particles, grease, or other debris that may have accumulated. Ensure that all mesh and perforated surfaces are clean and free of blockages.</video:description>
      <video:player_loc>https://www.youtube.com/embed/61sED-ABR28</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10759-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/T43vZjUwICQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect the Filter for Damage — Dishwasher Filter Cleaning</video:title>
      <video:description>Once the old filter is removed, perform a thorough visual inspection. Look closely for any signs of wear, such as fraying, tears, or actual holes in the mesh screen of the filter. If you&apos;ve been experiencing issues with food particles getting onto your dishes, it is highly likely that there is a hole or tear in the mesh, which would necessitate replacing the filter. If the filter is merely clogged with debris but otherwise intact, it can often be cleaned and reused, but a damaged filter requires replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/T43vZjUwICQ</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10759-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JlH2WtxCf2k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Filter Components — Dishwasher Filter Cleaning</video:title>
      <video:description>Take all removed filter components to a sink. Use warm running water to thoroughly rinse each part, removing any trapped food particles, grease, or residue. For stubborn debris, a soft brush (like an old toothbrush) can be used. While cleaning, inspect all filter parts for any visible signs of damage, such as cracks, tears in the mesh, or warping. If any damage is found, the filter or its damaged components should be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JlH2WtxCf2k</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10759-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/61sED-ABR28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wash Filters — Dishwasher Filter Cleaning</video:title>
      <video:description>Take both the ultra-fine filter and the fine filter to a kitchen sink. Rinse them thoroughly under warm, running water. Apply a small amount of dish soap to a sponge and gently scrub both filters to remove any stubborn food particles, grease, or other debris that may have accumulated. Ensure that all mesh and perforated surfaces are clean and free of blockages.</video:description>
      <video:player_loc>https://www.youtube.com/embed/61sED-ABR28</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10760-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kxRDs3GrdEk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble and Reinstall Filter — Dishwasher Filter Cleaning</video:title>
      <video:description>Once all filter components are clean, begin reassembly in reverse order. First, slide the central plastic piece back into the coarse metal filter until it clicks securely into place. Next, align and snap the fine silver mesh filter back onto the assembled plastic and coarse metal filter. Finally, carefully place the fully reassembled filter back into its position at the bottom of the dishwasher tub. Ensure the larger area of the filter is facing towards the front of the dishwasher. Twist the filter clockwise until the arrows on the filter housing align, indicating it is locked securely in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kxRDs3GrdEk</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10760-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rrwZ2PnkQkk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Main Filter Assembly — Dishwasher Filter Cleaning</video:title>
      <video:description>Open the dishwasher door again. Take the newly assembled main filter (grey). Carefully lower it into the base of the dishwasher tub. Depending on your specific dishwasher model, you will need to align a curved opening on the filter with a corresponding slotted opening in the pump housing. The video mentions that on some models this alignment point is on the left-hand side, and on others, it&apos;s towards the back. Gently press the filter down until it sits flush into the base of the tub. It should be able to rotate easily, indicating proper seating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rrwZ2PnkQkk</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10760-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N97e5Vwn_Is/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Main Filter Assembly — Dishwasher Filter Cleaning</video:title>
      <video:description>Open the dishwasher door again. Carefully place the newly assembled filter (new large filter with fine filter attached) into the base of the dishwasher tub. It is crucial to align the curved opening on the filter with the corresponding slotted opening in the pump housing. Depending on your dishwasher model, this slotted opening might be on the left-hand side or towards the rear. Once correctly aligned, the filter should sit flush with the tub&apos;s base and be able to turn easily, indicating proper seating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N97e5Vwn_Is</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10750-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bfKYvRRw8bI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Roofing Underlayment and Shingles — Shed Construction</video:title>
      <video:description>Start the roofing process by rolling out a layer of roofing underlayment, such as a synthetic felt, over the roof sheathing. Secure it with cap nails or staples. This provides an additional waterproof barrier. Next, install a starter course of asphalt shingles along the bottom edge of the roof. Then, apply successive rows of asphalt shingles, ensuring proper overlap and alignment as per manufacturer instructions. Fasten each shingle with roofing nails, using either a roofing nail gun or a hammer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bfKYvRRw8bI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10750-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YRciDPll_NY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Starter Row of Shingles — Shed Construction</video:title>
      <video:description>Begin by installing a starter row of shingles along the lower edge of the roof. Position these shingles with the rain slots facing upwards and the shingle&apos;s colored side exposed. Place the first starter shingle flush with the drip edge and allow a one-inch overhang on the side of the roof. Nail down each shingle using four roofing nails. Continue attaching subsequent shingles flush to each other, maintaining a one-inch overhang at the sides, to complete the starter row. At the back of the roof, allow the shingles to overhang; these will be trimmed later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YRciDPll_NY</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10750-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4z0_QHE7a4w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Shingles — Shed Construction</video:title>
      <video:description>After the starter strip is in place, begin installing the main shingles. The first shingle of the first course is installed along the bottom of the eave and against the rake. To achieve a proper &apos;book out&apos; pattern, the second shingle in the next course is installed 6 inches inward from the previous shingle; cut off the excess and set it aside for later use. Continue this pattern by laying the next shingle 6 inches further in, cutting it to size, and saving the remaining piece. Shingles should be installed in a diagonal pattern moving up the roof, ensuring that the cut lines do not overlap or align with the lines of the previous shingles. Each shingle typically requires nails shot an inch from the edge, with the second nail placed a foot from the first. Use six nails on the windward side of the roof and five on the leeward side, or adhere to the specific nailing pattern recommended by the shingle manufacturer on their packaging.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4z0_QHE7a4w</video:player_loc>
      <video:duration>93</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10751-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sk3bTp0AbP4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Siding and Cut Openings — Shed Construction</video:title>
      <video:description>Measure and cut siding panels (T1-11 style shown) to fit the shed walls. Use a circular saw with a track guide (PowerTec brand shown) for straight and accurate cuts. Position each siding panel onto the framed wall and secure it using a pneumatic nailer. As you install the siding, use a reciprocating saw to cut out the openings for windows and doors that were created during framing. Ensure the panels are flush and cover the framing adequately. Repeat this process for all walls and gable ends.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sk3bTp0AbP4</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10751-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1odKlfrfoCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Exterior Siding and Cut Openings — Shed Construction</video:title>
      <video:description>Once the wall frames are installed, proceed with covering them with exterior siding. For this project, an inexpensive exterior paneling with a wood-grain texture was chosen. Measure and cut the siding panels to fit the wall sections using a circular saw. Secure the siding to the wall frames using an impact driver and appropriate screws. After the siding is installed, mark the locations for the door and window openings. Drill pilot holes in the corners of these marked openings, then use a reciprocating saw or jigsaw to carefully cut out and trim the openings for a clean finish. The siding not only provides aesthetics but also significantly increases the structural rigidity of the walls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1odKlfrfoCw</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10751-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6Mar52-tEAs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Masonite Siding — Shed Construction</video:title>
      <video:description>With the framing complete, move on to installing the siding. Measure the area of each wall and cut the masonite siding sheets to the needed size using a circular saw. Nail the siding into place, ensuring it is flush and securely attached to the wall studs. You may encounter difficulties with certain areas, such as a back wall obstructed by an existing staircase. In such cases, carefully &apos;finesse&apos; or &apos;finagle&apos; the siding into place, making small adjustments and ensuring a tight fit. Attach the siding just like the rest of the walls, making sure all edges are covered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6Mar52-tEAs</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10752-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sk3bTp0AbP4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Windows, Doors, and Exterior Trim — Shed Construction</video:title>
      <video:description>Apply flashing tape (Tyvek Window/Door Flashing shown) around the rough window openings to create a waterproof barrier. Install pre-fabricated windows into the rough openings, securing them with screws through the window frame into the wall studs. The video shows the windows being installed from the exterior. From the interior, apply expanding foam sealant around the perimeter of the installed windows to seal any gaps and improve insulation. Add decorative trim boards around the exterior of the windows and secure them with a pneumatic nailer. The video demonstrates using a pocket hole jig to create strong joints for the door frames, then assembling the door frames and covering them with siding. The siding used for the door is different from the shed wall siding; it&apos;s a smooth board-and-batten style. Finally, paint the door panels and window trim.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sk3bTp0AbP4</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10752-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PMcIbAi42oU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Windows and Doors — Shed Construction</video:title>
      <video:description>Carefully install the pre-fabricated window frames into their respective openings. Ensure the windows are plumb and level, using shims if necessary. Secure the window frames to the timber studs with appropriate screws. Apply specialized sealing tape around the perimeter of each window frame, overlapping onto the breathable membrane, to create a watertight seal. For the door, install the pre-built door frame into the opening, ensuring it is plumb and square before securing it. Finally, attach the door panels to the frame using hinges and then apply the black wood paint for a protective and aesthetic finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PMcIbAi42oU</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10752-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLqZ2GW8Y9M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Construct and Install the Door — Shed Construction</video:title>
      <video:description>Mark and cut the door opening in the front OSB wall using a circular saw and a jigsaw for precise corners. Construct a simple rectangular door frame from 2x4 lumber using a pneumatic nailer. Cut exterior-grade OSB panels to fit the door frame and attach them with a pneumatic nailer. Apply asphalt felt paper to the door panels for weather protection, trimming excess with a utility knife. Install door hinges to the door frame and the shed&apos;s door opening using a cordless impact driver and appropriate screws. Hang the door, ensuring it opens and closes smoothly, then install a latch mechanism.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLqZ2GW8Y9M</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10753-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/G8_DliMsnms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Caulk, Paint, and Final Details — Shed Construction</video:title>
      <video:description>With the shed structure complete, it&apos;s time for the finishing touches. First, caulk all seams around the trim and soffit to seal gaps and provide a clean finish. DAP Dynaflex Ultra window and door caulk is recommended for this purpose. Once all caulking is done, proceed to paint the shed. The main body of this shed was painted in &apos;Site White,&apos; though a slightly darker color like &apos;Agreeable Gray&apos; could add more contrast to the &apos;Extra White&apos; trim. After the painting is complete, carefully remove any tape covering the hinges, replace the door latch, and perform a final clean-up of the area. Your 12x12 shed is now ready!</video:description>
      <video:player_loc>https://www.youtube.com/embed/G8_DliMsnms</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10753-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6CCZcGs84Ds/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint the Shed — Shed Construction</video:title>
      <video:description>The final step in completing the shed&apos;s exterior is painting. Begin by cleaning all exterior surfaces to ensure good paint adhesion. If your siding is unprimed, apply a coat of exterior primer first. Then, using paint rollers and brushes, apply at least two coats of exterior-grade paint to all walls, trim, and doors. Choose a color scheme that complements your home or landscaping. The video shows the builder painting the trim white and the doors and walls a reddish-brown color, using both a brush and a roller.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6CCZcGs84Ds</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10753-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bfKYvRRw8bI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint the Shed — Shed Construction</video:title>
      <video:description>For the final touch, paint the exterior of the shed. Begin by masking off any areas you don&apos;t want painted, such as the roof edges, using painter&apos;s tape. Apply a suitable exterior primer if recommended for your paint, then proceed with painting. Use a paint roller with an extension handle for large flat surfaces, and brushes for trim and corners. Ensure thorough coverage for weather protection and a uniform, attractive finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bfKYvRRw8bI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10742-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XYTy-KO9YSE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Planning and Site Preparation — Shed Construction</video:title>
      <video:description>Before beginning any construction, it&apos;s crucial to thoroughly plan the shed&apos;s design, including its dimensions, architectural style, and specific location within your garden. Consider factors like sun exposure for optimal solar panel performance and local zoning regulations. Once the design is finalized, prepare the chosen site by clearing any existing vegetation, debris, and ensuring the ground is level. Proper site preparation is fundamental for a stable and long-lasting structure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XYTy-KO9YSE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10742-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ah2-a-GADLQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Out the Foundation and Square the Corners — Shed Construction</video:title>
      <video:description>The shed location is chosen by the customer, often next to an existing structure. To ensure the frame is perfectly square, use Pythagoras&apos; Theorem. For a 10x12 ft shed, measure 12 ft along one side and 187.5 inches (the diagonal) from the corner. The intersection of two tape measures at these points defines the exact location for a perfect right-angle corner. Repeat this process for the opposite corner to align all four corners. Mark the positions with blue chalk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ah2-a-GADLQ</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10743-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ELE7Hf8rjIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Site — Shed Construction</video:title>
      <video:description>The video begins by showing a grassy area, indicating the first step in any construction project: site preparation. This involves clearing the designated area of any vegetation, debris, or rocks, and ensuring the ground is level. A level site is crucial for a stable shed foundation, preventing future structural issues. Use a shovel to remove turf and a rake to clear smaller debris. Employ a spirit level and straightedge or a string line and stakes to check and achieve a level surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ELE7Hf8rjIM</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10743-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ifZhgWdcyqo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Site Preparation and Foundation Excavation — Shed Construction</video:title>
      <video:description>The project begins with clearing the existing gravel from the designated shed area. Using shovels and rakes, the gravel is moved to one side, exposing the underlying soil. Trenches are then dug to create a level and stable base for the shed&apos;s foundation, ensuring proper drainage and preventing moisture issues.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ifZhgWdcyqo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10743-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MfcEQrfWcuE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Site and Outline the Shed Base — Shed Construction</video:title>
      <video:description>Begin by choosing the ideal location for your shed base, ensuring it is out of the way and suits your needs. Using measuring tape, stakes, and string, carefully mark out an area that is slightly larger than the dimensions of your shed. For instance, if your shed is 8x10 feet, mark a 9x11 foot area. This extra space is crucial for accommodating the 4x4 posts and the gravel base. Once the area is defined with string, use marking paint to clearly outline the perimeter on the grass, which will guide your excavation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MfcEQrfWcuE</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10744-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sk3bTp0AbP4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Site and Lay Foundation Blocks — Shed Construction</video:title>
      <video:description>Begin by preparing the site for the shed foundation. This involves clearing the ground and placing concrete blocks at strategic points to support the shed&apos;s floor frame. Use a shovel to level the ground beneath each block as needed. The video shows a laser level being used to ensure all foundation blocks are at the same height, which is crucial for a stable and level structure. Once the ground is adequately prepared, arrange the concrete blocks according to your shed&apos;s dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sk3bTp0AbP4</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10744-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/G8_DliMsnms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Site and Lay Foundation Blocks — Shed Construction</video:title>
      <video:description>Begin by deciding on the optimal location and desired foundation type for your shed. For a portable option that allows for airflow and easy relocation, concrete deck blocks are recommended. Before proceeding, consult local building codes to determine required setbacks from property lines. For this project, a 3-foot setback was required. Measure 3.5 feet from the fence and place the concrete blocks. Then, position additional blocks 3 feet inside each corner where the shed will be. Use a stake as a reference point for each block and excavate any sandy topsoil until firmer earth is reached. If a tamper is unavailable, use a 2x6 to pack the soil down. Finally, pour gravel into the excavated areas. To determine the correct block height, subtract the combined height of the 4x4 skid and the 2x6 foundation (which will sit on the block) from the desired shed height (no more than 12 inches off the ground at the front) to know how far the block should extend above the ground surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/G8_DliMsnms</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10744-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/G8_DliMsnms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level and Square the Foundation Blocks — Shed Construction</video:title>
      <video:description>After placing the foundation blocks, ensure they are perfectly level and square. You can achieve this using a line level, but for greater precision, a laser level is recommended. First, choose a &apos;control block&apos; as your reference point. Then, adjust the remaining blocks to be level with the control block by adding or removing gravel underneath. Once all blocks are level, verify the foundation is square by measuring the diagonals; both diagonal measurements should be identical. Mark the center of each block. Finally, fill around the blocks with dirt or gravel, or concrete for added stability. These blocks will later have 4x4 squares installed in their center to which the skids will be attached, preventing lateral movement and securing the shed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/G8_DliMsnms</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10745-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sk3bTp0AbP4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Floor Frame and Install Subfloor — Shed Construction</video:title>
      <video:description>Measure and cut pressure-treated lumber (2x6s shown) for the shed&apos;s floor joists and rim joists. Assemble the perimeter of the floor frame by screwing the rim joists to the end joists. Use a measuring tape to accurately mark the spacing for the intermediate joists, typically 16 inches on center. Install metal joist hangers using a hammer to secure the intermediate floor joists to the rim joists, ensuring they are flush and square. Finally, use a circular saw to cut oriented strand board (OSB) panels, marked as &apos;Advantech&apos; brand, to fit the floor frame. Secure the OSB subfloor panels to the joists using a pneumatic nailer and appropriate nails, ensuring proper spacing for expansion and contraction. The dog &apos;Sadie&apos; is seen supervising the work.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sk3bTp0AbP4</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10745-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ah2-a-GADLQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Floor Joists and Subflooring — Shed Construction</video:title>
      <video:description>Floor joists are delivered pre-cut to the customer&apos;s home. Take measurements every 16 inches along the outer frame to mark the placement of each floor joist. Install these joists within the outer frame, securing them using galvanized 3-inch framing nails with a nail gun. Work in tandem with a partner to ensure joists are flush with the outer frame height and do not protrude. Once all joists are installed, place Advantech OSB subflooring panels on top. These panels are pre-cut and feature a tongue-and-groove design, allowing them to slot into each other for a gap-free, squeak-free, and moisture-resistant floor. Secure the subflooring with a nail gun.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ah2-a-GADLQ</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10745-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2l4AfZZp6SI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Floor Framing — Shed Construction</video:title>
      <video:description>While the stain on the subfloor panels dries, begin assembling the floor framing. This involves positioning the floor joists between the rim joists and nailing them together. The video demonstrates &apos;through nailing&apos; the joists into the rim joists first. This temporary fastening method helps to quickly position and hold the joists in place before installing more permanent joist hangers. For added strength and load transfer to the foundation blocks, double up the front and back rim joists. This prevents future sagging. Two nails at each joist location are usually sufficient for initial positioning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2l4AfZZp6SI</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10746-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sk3bTp0AbP4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Frame Walls and Rough Openings — Shed Construction</video:title>
      <video:description>Using a speed square, measure and mark all the lumber needed for the wall frames: vertical studs, horizontal plates, and blocking for window/door openings. The video demonstrates using a speed square to mark angle cuts for door headers. Carefully cut these pieces using a circular saw or jig saw (DeWalt XR Jig Saw shown). Assemble each wall section (front, back, and two sides) on the completed subfloor by nailing the studs between the top and bottom plates. Ensure that all studs are spaced correctly, typically 16 or 24 inches on center. The wall framing process includes creating rough openings for windows and doors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sk3bTp0AbP4</video:player_loc>
      <video:duration>103</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10746-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DUkDNjy9F6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wall Frame Assembly — Shed Construction</video:title>
      <video:description>Assemble the timber frames for each wall section on the flat concrete pad. Ensure all studs have their natural &apos;crown&apos; (slight bow) facing in the same direction to simplify leveling later. Use a framing nailer and 90mm collated framing nails to secure the top and bottom plates to the pre-cut studs, creating sturdy wall sections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DUkDNjy9F6E</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10746-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fePj1aY5CKQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Wall Frames — Shed Construction</video:title>
      <video:description>Lay out 2x4 lumber on the completed subfloor to begin assembling the wall frames. Use a tape measure to ensure studs are spaced at 16 inches on center. Secure the studs to the top and bottom plates using 3.5-inch exterior screws, then follow up by hammering 3-inch framing nails for extra strength. Use a chalk line to mark the positions for blocking (short pieces of lumber installed horizontally between studs) and install them using the same screw and nail method. Repeat this process for all walls, ensuring all framing is robust and square.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fePj1aY5CKQ</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10747-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S7uYZD2TCBk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Roof Rafters — Shed Construction</video:title>
      <video:description>With the walls framed, install the roof rafters. These are typically cut at an angle to create a sloped roof. Use a jigsaw to cut out birdsmouth notches on the rafters where they sit on the top plate of the walls, ensuring a secure fit. Install and fasten the rafters to the top plates using screws and an impact driver, making sure they are evenly spaced and provide the desired roof overhang.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S7uYZD2TCBk</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10747-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FHux_hPD99c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Roof Framing and Ladder Detail — Shed Construction</video:title>
      <video:description>Measure and mark each roof rafter (joist) at 150mm from the back edge using a speed square and pencil. This mark indicates the extent of the roof overhang. This process should be done for all rafters to save time later. Install the rafters, ensuring they are evenly spaced and securely fastened to the top plates. This roof design includes &apos;ladder&apos; details on both sides, which are multiple pieces of timber installed perpendicular to the rafters at the edge of the roof to create the eaves. Install the ring beam, a continuous piece of timber, around the entire perimeter of the roof, attaching it to the outside edges of the rafters. This helps to unify the roof structure and provides a solid base for fascia boards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FHux_hPD99c</video:player_loc>
      <video:duration>264</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10747-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLqZ2GW8Y9M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Frame the Roof — Shed Construction</video:title>
      <video:description>Measure and cut 2x4 lumber for the roof rafters. The rafters will span from the taller back wall to the shorter front wall, creating the roof&apos;s slope. Carefully mark and cut birdsmouth notches into each rafter using a miter saw and a jigsaw. These notches allow the rafters to sit securely and level on the wall&apos;s top plates. Position each rafter on the top plates and secure them using a pneumatic nailer and structural nails. Ensure the spacing between rafters is consistent.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLqZ2GW8Y9M</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10748-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LIvKMFThoAI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Roof Sheathing — Shed Construction</video:title>
      <video:description>Install the roof sheathing panels, typically OSB or plywood, over the installed rafters. Secure these panels using a nail gun, following the same nailing pattern as the wall sheathing (6 inches on the perimeter and 12 inches in the field) to ensure a strong and stable roof deck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LIvKMFThoAI</video:player_loc>
      <video:duration>141</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10748-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/InNOJcQ4GLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Roof Sheathing — Shed Construction</video:title>
      <video:description>After the roof frame is complete, large sheets of plywood or OSB are installed as roof sheathing. These panels are nailed down to the rafters or trusses, creating a solid, continuous surface over the entire roof structure. This sheathing provides additional structural rigidity and serves as the substrate for the roof underlayment and final roofing materials. Workers carefully align and secure each panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/InNOJcQ4GLc</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10748-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VjvWdvbAcfY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Layer of Plywood Sheathing — Shed Construction</video:title>
      <video:description>Begin installing the first layer of plywood sheathing on top of the rafters. Carefully lift and position the plywood sheets, ensuring they align with the rafters and are spaced correctly. Secure each sheet to the rafters using an impact driver and roofing screws or nails. Work systematically, covering the entire roof frame with the first layer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VjvWdvbAcfY</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10749-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4z0_QHE7a4w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drip Edge — Shed Construction</video:title>
      <video:description>Begin by installing the drip edge, starting from the eave on the far side of the roof, and then working towards and up the closer rake. Use tin snips to cut the bottom portion of the drip edge to allow it to &apos;scissor&apos; over the ridge for a neat finish. Secure the drip edge by shooting nails every 12 to 16 inches. When making corners, fold the drip edge to create a clean, aesthetically pleasing look that also provides continuous support under the shingles. Ensure that the nails never penetrate the front flange of the drip edge; they should only go through the drip edge and into the roof decking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4z0_QHE7a4w</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10749-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GWT5ron81xw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drip Edge, Ice &amp; Water Barrier, and Underlayment — Shed Construction</video:title>
      <video:description>Install aluminum drip edge around the entire perimeter of the roof, securing it with nails. The drip edge helps direct water away from the fascia and prevents water infiltration. Next, lay down an ice and water barrier (e.g., a synthetic peel-and-stick membrane) along the eaves and in valleys (if applicable). This provides an extra layer of protection against ice dams and water penetration. Finally, cover the remaining areas of the roof deck with synthetic underlayment (e.g., VB Shield), overlapping the ice and water barrier and securing it with plastic cap nails. This underlayment is preferred over traditional felt paper for its durability and water resistance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GWT5ron81xw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10749-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FdLahiPBWWs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Drip Edge Strips and Underlayment — Shed Construction</video:title>
      <video:description>To further protect the roof&apos;s edges and underside from moisture and wind, install corrosion-resistant drip edge strips. These strips are nailed securely to the perimeter of the roof decking, overlapping slightly at corners. Once the drip edge strips are in place, unroll and secure the Easy Shingle Underlay. Lay the underlay parallel to the lowest drip edge. When laying multiple sections, ensure a minimum 10 centimeter (cm) overlap between them. If the roof gradient (slope) is between 15 and 20 degrees, increase this overlap to 50 cm for enhanced protection. Critically, the Easy Shingle Underlay should be fastened over the drip strip at the bottom edge of the roof, but at the sides, it should extend just under the drip strip. This specific positioning ensures efficient drainage of water off the roof and prevents it from getting under the underlayment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FdLahiPBWWs</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10731-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aH_vLiBJ6bg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Floor Imperfections — Flooring &amp; Tiling</video:title>
      <video:description>Begin by inspecting the floor surface. Use a long level to identify any uneven areas, such as ridges in the plywood subfloor or areas where the floor might be rocking. The presenter notes a 1/16-inch ridge in the plywood and checks for rocking in the subfloor. Also, identify any significant gaps in the underlayment, as these will need to be filled. The goal at this stage is to identify all imperfections that need addressing before new flooring is installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aH_vLiBJ6bg</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10731-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NuUbUxDmqNE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ensure Subfloor is Level — Flooring &amp; Tiling</video:title>
      <video:description>Assess the levelness of your subfloor using a long level and a tape measure. The subfloor should be level within a variance of 3/16 of an inch over every 10 feet. If you find any high spots, use a sander to carefully sand them down. For low spots, follow your flooring manufacturer&apos;s instructions to apply a cementitious leveling compound to create an even surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NuUbUxDmqNE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10731-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1MSXF3VZQMs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Existing Floor for Flatness — Flooring &amp; Tiling</video:title>
      <video:description>Before laying down the new subfloor, use a 6-foot or 8-foot straight edge or level to check the existing floor for flatness. Run the straight edge in multiple directions (longitudinally, perpendicularly, and diagonally across the room) to identify any dips or humps. Any imperfections will affect the final flooring, so address them before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1MSXF3VZQMs</video:player_loc>
      <video:duration>87</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10732-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WqyKhSYkpRQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demolish Existing Flooring Layers — Flooring &amp; Tiling</video:title>
      <video:description>Don personal protective equipment, including a dust mask, safety glasses, and hearing protection, as this step will create dust and noise. Set the blade depth of a circular saw to match the combined thickness of all existing flooring layers to avoid cutting into the subfloor unnecessarily. Carefully cut the old flooring into manageable squares or strips. Once cut, use a pry bar to lift and remove the sections. The goal is to remove all existing layers (old vinyl, luan, etc.) to get down to a solid, smooth subfloor, such as CDX plywood. After removal, inspect the subfloor for any damage or irregularities. In this case, the CDX subfloor was in good condition and didn&apos;t require additional leveling layers like luan.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WqyKhSYkpRQ</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10732-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NuUbUxDmqNE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Existing Flooring and Baseboards — Flooring &amp; Tiling</video:title>
      <video:description>Carefully remove any existing carpet, padding, or other floor coverings from the subfloor. Use a hammer and pry bar to gently remove baseboards from around the perimeter of the room. Removing baseboards is important as it allows for the creation of an appropriate expansion gap for the new flooring, which is critical for preventing warping or buckling due to temperature and humidity changes. Note that certain types of new flooring may be installed directly over existing vinyl flooring, so check your manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NuUbUxDmqNE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10732-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/afrUJ1YBtdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Existing Flooring and Fixtures — Flooring &amp; Tiling</video:title>
      <video:description>Proceed to remove any existing flooring components. Carefully remove baseboards from around the room. Next, pull up any carpet and its underlying tack strips. If your current flooring is vinyl, check the manufacturer&apos;s instructions for your new flooring, as some types can be installed directly over a single layer of vinyl. However, generally, it&apos;s best to remove all existing flooring for optimal subfloor preparation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/afrUJ1YBtdE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10733-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tmm648dcX4U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Subfloor — Flooring &amp; Tiling</video:title>
      <video:description>Thoroughly prepare the subfloor by ensuring it is smooth, flat, dry, clean, and solid. Remove any existing carpet staples or adhesive residue using a scraper or adhesive remover. Check for moisture and fill any large holes or cracks with self-leveling compound. Ensure all screws are countersunk. Sand down any uneven spots exceeding 5 millimeters using a belt sander. If replacing vinyl flooring installed prior to 1990, consult a professional due to potential asbestos concerns.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tmm648dcX4U</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10733-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/argGr4i6T5k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Subfloor — Flooring &amp; Tiling</video:title>
      <video:description>Before laying any flooring, thoroughly prepare the subfloor. Ensure it is clean by removing any debris, dust, or old adhesive. The subfloor must also be completely dry and level. If there are any uneven areas or depressions, use a self-leveling compound to create a smooth, consistent surface, which is crucial for a professional-looking and durable installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/argGr4i6T5k</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10733-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/94Z7CR8_QjE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Clean the Subfloor — Flooring &amp; Tiling</video:title>
      <video:description>After removing the old flooring, thoroughly clean the subfloor to remove any dust, dirt, or small debris. Use a shop vac for this purpose. Once clean, use a level to check the flatness of the subfloor. Ensure it meets the manufacturer&apos;s specifications for your new hardwood flooring to prevent future issues with unevenness or gaps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/94Z7CR8_QjE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10734-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tNcsE9CiDXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Acclimate Laminate Flooring — Flooring &amp; Tiling</video:title>
      <video:description>Before beginning the installation, ensure the unopened laminate flooring planks are placed in the room where they will be installed. This allows the planks to acclimate to the room&apos;s temperature and humidity for 48 hours, which is crucial for preventing expansion or contraction issues after installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tNcsE9CiDXw</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10734-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GJ1oUj1zKAQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Acclimate Flooring and Establish Layout Guidelines — Flooring &amp; Tiling</video:title>
      <video:description>Allow the new flooring to acclimate to the room&apos;s temperature and humidity for at least 72 hours before installation. Ensure the room conditions meet the manufacturer&apos;s recommendations. Next, determine the layout of your flooring. Use the sight lines of the room to decide which direction the planks will run. Mark the center of each wall with a pencil. Then, snap a chalk line between the opposing marks to create a cross in the center of the room. Measure from the center point to the starting wall. Subtract the manufacturer&apos;s recommended expansion gap from this measurement. Then, measure this new distance from the parallel center line to each end of the starting wall. Finally, snap a chalk line between these new marks to form a guideline for your first row of flooring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GJ1oUj1zKAQ</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10734-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WqyKhSYkpRQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Acclimate Flooring Material — Flooring &amp; Tiling</video:title>
      <video:description>Before starting the flooring replacement, the material (luxury engineered vinyl plank flooring) should be delivered to the homeowner&apos;s house and allowed to acclimate to the environment. This means letting the flooring sit in the room where it will be installed for a recommended period, usually 48-72 hours, to adjust to the temperature and humidity. This prevents expansion or contraction issues after installation, ensuring the planks lay flat and maintain their integrity. The material has already been sent and is acclimating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WqyKhSYkpRQ</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10735-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7Nfaly9QwVw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Flooring Layout &amp; Establish Start Point — Flooring &amp; Tiling</video:title>
      <video:description>Before laying planks, carefully consider the desired visual effect for your room. Horizontal patterns can make the room appear wider, while vertical patterns will make it feel longer. For this project, a vertical pattern was chosen to accentuate the room&apos;s length. Since the room was not perfectly square (a common characteristic in older homes), the decision was made to begin the flooring installation from a measured center point. Use a tape measure to find the exact center of the room or the desired starting line. Then, snap a chalk line across the subfloor. This chalk line will serve as the primary reference for aligning all subsequent planks, so ensure it is precise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7Nfaly9QwVw</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10735-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tNcsE9CiDXw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Plank Direction and Measure Room — Flooring &amp; Tiling</video:title>
      <video:description>Determine the optimal direction for laying the laminate planks. For the best aesthetic appeal, it is recommended to lay the planks parallel to the main incoming light source in the room. Then, measure the room to ensure squareness and to calculate the width of the final row of flooring. If the calculated width of the last row is less than the width of a full plank, the first row of planks will need to be cut lengthwise to ensure the last row is a reasonable width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tNcsE9CiDXw</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10735-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/miJZQRplWXM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Flooring Direction — Flooring &amp; Tiling</video:title>
      <video:description>Before you begin laying the hardwood planks, you must determine the optimal direction for the flooring. The two primary considerations are: installing the hardwood parallel to the main incoming light source (e.g., from a window) or installing it parallel with the longest wall in the room. Choosing one of these directions often enhances the aesthetic appeal of the flooring and can make the room appear larger or more cohesive.</video:description>
      <video:player_loc>https://www.youtube.com/embed/miJZQRplWXM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10736-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gYHMsk3cty0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay the First Row of Planks — Flooring &amp; Tiling</video:title>
      <video:description>Begin laying the first row of vinyl planks. Position the initial plank against the wall, ensuring it&apos;s properly aligned. Place 1/4-inch spacers all around the edges of the room where the flooring meets a wall. These spacers are essential as they create an expansion gap, allowing the flooring to naturally expand and contract with changes in temperature and humidity without buckling. For subsequent planks in the first row, align the tongue-and-groove or click-lock mechanism with the previous piece, lift one end slightly to engage, and gently drop it down to interlock. Continue this process to complete the entire first row, maintaining the 1/4-inch expansion gap with spacers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gYHMsk3cty0</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10736-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7Cr_F63p45o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay the First Row of Planks — Flooring &amp; Tiling</video:title>
      <video:description>Begin laying the first row of planks in a corner of the room, typically with the tongue side facing away from the wall or the groove side against the wall if starting from that edge. For the first plank, ensure its short end is against the wall. For subsequent planks in the first row, connect them end-to-end using the click-lock system. Gently tap them into place with a rubber mallet if needed, making sure the connections are even and the entire row is level. Use a laser level to ensure the first row is perfectly straight, which is crucial for the rest of the installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7Cr_F63p45o</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10736-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vz1X3O0XsCs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Row of Planks — Flooring &amp; Tiling</video:title>
      <video:description>Begin laying the first row of planks starting from the right corner of the room. Orient the first plank so its tongue side faces the wall. Use spacers to establish a precise 10mm (0.4 inches) expansion gap between the planks and the surrounding walls, as well as any other fixed objects like columns or cabinets. To install subsequent planks in the first row, hold each new plank at an angle (approximately 20-30 degrees) against the previously installed plank, then gently lower it flat onto the floor. This action engages the integral locking mechanism, securing the planks together along their long sides. Continue this process until the entire first row is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vz1X3O0XsCs</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10737-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WqyKhSYkpRQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Continue Laying and Cutting Planks — Flooring &amp; Tiling</video:title>
      <video:description>Continue installing subsequent rows of flooring, maintaining the staggered pattern for joints. For any areas requiring special cuts, such as around floor vents, pipes, or cabinet bases, measure carefully using a tape measure and mark the cuts with a pencil. Use the flooring cutter for straight cuts or a jigsaw for curves and intricate shapes. Ensure that a 1/4 inch expansion gap is maintained around all fixed objects. Tap each plank into place, ensuring a tight seam along both the length and the ends. Working in sections, you&apos;ll see the new floor take shape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WqyKhSYkpRQ</video:player_loc>
      <video:duration>100</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10737-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uJ2oaCfjzCc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Subsequent Rows from Installed Surface — Flooring &amp; Tiling</video:title>
      <video:description>Once a sufficient number of initial rows of flooring have been installed, shift your working position to operate from the newly installed surface. This approach makes the continuation of the installation process significantly easier by providing better leverage and a stable base. Continue laying the remaining floor one board at a time. For each new board, position it along the edge of the previously laid row, then pull the board toward you, engaging its tongue-and-groove or click-lock mechanism. A tapping block and rubber mallet, or a specialized pull bar, can be used to ensure each board fully snaps into its final locked position without creating gaps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uJ2oaCfjzCc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10737-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gYHMsk3cty0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Remaining Rows and Stagger Seams — Flooring &amp; Tiling</video:title>
      <video:description>As you continue to install subsequent rows, it&apos;s crucial to stagger the seams from the previous row to enhance the floor&apos;s stability and visual appeal. A common recommendation is to stagger seams by at least 8 inches, but always refer to your specific flooring manufacturer&apos;s instructions for their recommended minimum staggering distance. After locking a plank into place, use a tapping block and a hammer or mallet to gently tap it, ensuring it&apos;s secure and tightly fitted against the adjacent planks. For each new piece, first, engage the locking mechanism at the top edge, then carefully scoot the plank as close as possible to the previously installed plank in the row without fully locking the long edge. Use a tapping block with a bridge piece (or pull bar) at the end of the plank to tap it into final position, achieving a tight and secure connection along both the long and short sides.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gYHMsk3cty0</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10738-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2oeo_9DMZn0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Custom Cuts for Obstacles — Flooring &amp; Tiling</video:title>
      <video:description>When encountering obstacles like door frames, you&apos;ll need to make precise cuts. One effective method is to create a paper template of the irregular shape required to fit around the obstruction. Place the flooring board next to the obstacle, position a piece of paper over the area to be cut, and trace the contour of the door frame onto the paper with a pencil. Transfer this template to the flooring board. Use a jigsaw to carefully cut along the marked line on the board. This method ensures a snug fit around the door frame without excessive gaps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2oeo_9DMZn0</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10738-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kvo-n2AYZnA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Around Vents and Obstacles — Flooring &amp; Tiling</video:title>
      <video:description>When encountering obstacles like air vents or irregular shapes, it&apos;s essential to plan cuts carefully. For a floor vent, avoid making the cutout on the very end of a plank if possible, as this can compromise the locking system&apos;s integrity. Instead, position your planks so that the vent cutout is at least 8 inches into a new plank. Use a carpenter&apos;s square or right-angle tool to transfer the vent&apos;s dimensions to the plank, marking the cut lines precisely. For cutting, you can use a multi-tool, a jigsaw (after drilling a starter hole), or a pull saw. Cut out the marked section, ensuring a snug fit around the vent opening. For the final rows along a wall, particularly if the wall is uneven or has a bump-out, you may need to cut narrow strips of planks to fit. Use a jigsaw guided by a T-square or a straight edge clamped to the board for precise, straight cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kvo-n2AYZnA</video:player_loc>
      <video:duration>101</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10738-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t8zPm79ErRM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Around Obstructions — Flooring &amp; Tiling</video:title>
      <video:description>If your room contains pipes, floor vents, or other obstructions, you will need to cut out the necessary space in the flooring planks to accommodate them. First, carefully measure the dimensions and location of the obstruction. Mark these measurements precisely onto the plank. Drill pilot holes using a paddle bit at the corners or entry points of your cut-out area. Then, use a jigsaw to cut out the required shape. Always remember to leave an expansion space around the obstruction to allow for the natural movement of the flooring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t8zPm79ErRM</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10739-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XGI80_sovRI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Final Flooring Row — Flooring &amp; Tiling</video:title>
      <video:description>For the final row of flooring, accurately measure the remaining width between the last full plank and the wall. Then, cut the planks for this row to the appropriate width using a hand saw, jigsaw, or miter saw, ensuring to account for the necessary expansion gap. Once cut, use a pull bar to carefully insert and engage the final planks into the previous row. A rubber mallet can be used with the pull bar to gently tap the planks into place. Throughout this process, double-check to maintain the required expansion gap along the wall to allow for any future movement of the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XGI80_sovRI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10739-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mWjBhzqptlg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fit and Secure the Final Row — Flooring &amp; Tiling</video:title>
      <video:description>For the final row, measure the remaining gap and rip the final planks to the required width using a circular saw. If the final row is less than 1 inch in width, it is recommended to glue it to the previous uninstalled row and face-nail them together as one unit. Position the ripped board into place. Use a pull bar (also known as a pry bar) and a rubber mallet to pull the final board tight against the previous row, ensuring a snug fit against the wall, then face-nail it into the subfloor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mWjBhzqptlg</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10739-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nOrjCrRFDCs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete the Last Row and Install Moldings — Flooring &amp; Tiling</video:title>
      <video:description>As you reach the final row, it will likely need to be cut lengthwise to fit the remaining space. Mark the required size on the plank using a pencil and cut it with a utility knife and straightedge, similar to previous cuts. It&apos;s important that this last row is at least 2 inches wide for stability and a professional finish. Once all planks are installed, carefully remove all the 1/4-inch spacers from around the perimeter of the room. Finish the installation by attaching moldings, such as baseboards or quarter rounds, to the walls. These moldings will cover the expansion gap left around the edges of the room, providing a clean and finished look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nOrjCrRFDCs</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10740-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8iv5651rXDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Baseboards and Trim — Flooring &amp; Tiling</video:title>
      <video:description>The final step involves installing new baseboards and any necessary trim around the perimeter of the room and doorways. This conceals the expansion gap and provides a finished look. Secure the baseboards and trim with a brad nailer or hammer and finishing nails. Once installed, the room is complete with its new black-painted pine floors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8iv5651rXDQ</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10740-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kvo-n2AYZnA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Baseboards and Final Transitions — Flooring &amp; Tiling</video:title>
      <video:description>After all the vinyl planks are installed, the final step is to reinstall the baseboards (if removed). Place the baseboards back in their original positions and secure them with finish nails. This covers the expansion gap around the perimeter of the room, creating a clean, finished look. Additionally, install the T-molding transition strip into the pre-installed U-channel at the doorway. Use a rubber mallet to gently tap the T-molding into the channel until it is securely seated. This completes the transition, even if there&apos;s a slight height difference between the vinyl plank and the adjacent flooring. Ensure the manufacturer&apos;s recommendations are followed, especially regarding underlayment. Some vinyl planks have built-in underlayment and may void the warranty if an additional underlayment is used.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kvo-n2AYZnA</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10740-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SSdXCXYQzpA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Transition Strips and Finish Flooring — Flooring &amp; Tiling</video:title>
      <video:description>After all laminate planks are laid, remove any temporary spacers used along the walls. Install transition strips at doorways or wherever the laminate flooring meets another type of flooring (e.g., carpet, tile) to create a smooth, finished edge and cover any expansion gaps. The video shows installing a metal transition strip that typically involves securing a track to the subfloor and then snapping the strip into place. Finally, reattach baseboards or install quarter-round molding along the perimeter of the room to conceal the expansion gaps, completing the professional look of your new laminate flooring. This will provide a durable and attractive finish, as seen in the final result.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SSdXCXYQzpA</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10741-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nmyItpmmQ2w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Cleanup — Flooring &amp; Tiling</video:title>
      <video:description>After all the vinyl planks are installed, remove any remaining spacers along the walls. Perform a final thorough sweep and vacuum of the entire new floor to remove any sawdust or debris. Admire the finished product, noting the smooth, gap-free surface and the modern aesthetic that has replaced the old, damaged hardwood. The new flooring provides a clean, updated look that complements the home&apos;s interior.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nmyItpmmQ2w</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10741-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Mv2rWwBt7gg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up New Flooring — Flooring &amp; Tiling</video:title>
      <video:description>Once the entire floor is laid and skirting is installed, give the new floor a thorough clean. Use a microfiber mop or similar soft cleaning tool to remove any dust, debris, or fingerprints accumulated during the installation process. Proper cleaning and care will ensure your new floor lasts for many years. Always refer to the manufacturer&apos;s instructions for specific future cleaning and maintenance tips to preserve the floor&apos;s finish and durability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Mv2rWwBt7gg</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10741-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NaCeB4efdr8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Cleanup — Flooring &amp; Tiling</video:title>
      <video:description>Once the final coat of finish has cured sufficiently to be walked on, perform a thorough final cleanup. Use a backpack vacuum to remove any remaining dust and debris from the floor. Wipe down all surfaces, including baseboards and windowsills, to ensure a pristine finish. Double-check for any missed spots or messes created during the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NaCeB4efdr8</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10729-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — tear up a stair runner</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10729-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — tear up a stair runner</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10729-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — tear up a stair runner</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10730-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — tear up a stair runner</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10730-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — tear up a stair runner</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10730-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — tear up a stair runner</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10727-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — installing removable carpet stair treads</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10727-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing removable carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10727-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — installing removable carpet stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10728-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — installing removable carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10728-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — installing removable carpet stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10728-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — installing removable carpet stair treads</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10720-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ibs3wLb6nEk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — Drain Snaking</video:title>
      <video:description>Before starting, clear the area under the sink to provide ample workspace. Place a bucket or a pan directly under the P-trap (the U-shaped section of the pipe) to catch any water that will spill out. Lay down old towels around the bucket to absorb any splashes. Ensure you have all your tools, such as a plunger, channel-lock pliers, and a drain snake, ready and within reach.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ibs3wLb6nEk</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10720-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mlM1kuECosQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — Drain Snaking</video:title>
      <video:description>Prepare the area under the sink for the job. Since drain cleaning can be messy, clear out any items stored under the sink. Place rags or an old towel on the bottom of the cabinet to absorb any spills. Then, place a small bowl directly under the P-trap&apos;s cleanout plug to catch any water that will be released when you open it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mlM1kuECosQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10720-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V2s-RJdNkok/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation and Safety Precautions — Drain Snaking</video:title>
      <video:description>Begin by gathering your tools and preparing the workspace. If you&apos;ve previously used chemical drain cleaners, it is crucial to wear protective rubber gloves to avoid skin contact with harsh chemicals. You will also need a bucket to catch water and debris. For older plumbing with metal fittings, have a pair of channel-lock pliers ready, although newer plastic fittings can often be loosened by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V2s-RJdNkok</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10721-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8wD1dkUgMEU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Drain Stopper — Drain Snaking</video:title>
      <video:description>With the pop-up stopper in the open (up) position, grip the top and twist it counter-clockwise. Continue twisting until the stopper is fully unscrewed from the drain opening. Lift the stopper out of the sink and set it aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8wD1dkUgMEU</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10721-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tL72r5iUWIU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble and Inspect the Drain Stopper — Drain Snaking</video:title>
      <video:description>Begin by inspecting the drain stopper, as it&apos;s a common place for clogs to start. For this type of stopper, use adjustable pliers to gently loosen the top decorative cap by turning it counter-clockwise. Once loosened, unscrew it the rest of the way by hand. This will expose a central screw. Use a flathead screwdriver to remove this screw, which will release the main body of the stopper. Lift the stopper assembly out and check the drain opening and the crossbars for any accumulated hair or debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tL72r5iUWIU</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10721-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FM5pYiOajVY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Loosen Drain and Remove Stopper — Drain Snaking</video:title>
      <video:description>Loosen the large mounting nut that holds the drain assembly to the underside of the sink. Use channel-lock pliers to turn the nut counter-clockwise. Once loose, push the entire drain pipe upwards slightly. From above the sink, lift the old stopper out of the drain opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FM5pYiOajVY</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10722-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uOE7eDBuaIk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Snake the Bathtub Drain — Drain Snaking</video:title>
      <video:description>Begin by unlocking the set screw on the drain snake. Slowly feed the snake&apos;s cable into the overflow drain opening. Continue pushing the cable forward until you encounter resistance, which usually indicates you&apos;ve reached the P-trap or the clog itself. Once resistance is felt, tighten the set screw to lock the cable in place. Now, crank the handle of the drum auger clockwise while simultaneously pushing the cable forward. This rotation helps the snake navigate the P-trap and hook onto or break apart the clog. If the snake can&apos;t pass, loosen the screw, push a bit more, re-tighten, and rotate again. Repeat this process, feeling for changes in resistance. Once you believe the clog is dislodged, carefully retract the snake while holding a rag around the cable to wipe off any accumulated hair, soap scum, or other debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uOE7eDBuaIk</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10722-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mlM1kuECosQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Feed the Drain Snake — Drain Snaking</video:title>
      <video:description>With your work gloves on, insert the head of the drain snake into the cleanout opening. Begin feeding the snake into the pipe, pushing it 8 to 12 inches at a time while simultaneously spinning the drum handle. This spinning action helps the snake navigate turns in the pipe and work its way through the clog. Continue feeding the snake until you feel you have reached and broken through the blockage. You may feel resistance, which could be a clog or simply a bend in the pipe; continue to gently push and rotate to move past it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mlM1kuECosQ</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10722-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b-n3bmPm9Bo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Snake the Drain — Drain Snaking</video:title>
      <video:description>Put on gloves. Insert the drain snake into the drain opening and push it down, twisting it as you go. When you reach the p-trap or a bend in the pipe, engage the brake on the drain snake, twist to navigate the curve, release the brake, and continue pushing and twisting until you encounter resistance or the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b-n3bmPm9Bo</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10723-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LncIxMbmvWc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Break Up or Grab Clog — Drain Snaking</video:title>
      <video:description>Once the clog is located, rotate the handle of the plumbing snake while applying gentle pressure. This action causes the coiled end of the snake to break up or grab onto the obstruction. You may feel the snake pushing against the clog or starting to hook onto it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LncIxMbmvWc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10723-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z5WNCFCgGNA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Engage the Clog with the Snake — Drain Snaking</video:title>
      <video:description>When the snake cable stops advancing, you have reached the obstruction. To engage the clog, hold the snake&apos;s housing steady and begin to turn the handle in a clockwise direction. This rotational motion will cause the auger tip, which has small spikes, to drill into and wrap around the blockage, whether it&apos;s a bird&apos;s nest, leaves, or other debris. You should be able to feel the cable twisting and tightening as it latches onto the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z5WNCFCgGNA</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10723-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z5WNCFCgGNA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Engage the Clog with the Snake — Drain Snaking</video:title>
      <video:description>When the snake cable stops advancing, you have reached the obstruction. To engage the clog, hold the snake&apos;s housing steady and begin to turn the handle in a clockwise direction. This rotational motion will cause the auger tip, which has small spikes, to drill into and wrap around the blockage, whether it&apos;s a bird&apos;s nest, leaves, or other debris. You should be able to feel the cable twisting and tightening as it latches onto the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z5WNCFCgGNA</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10724-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eEMidgtzf2A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Retract Cable and Flush Drain — Drain Snaking</video:title>
      <video:description>After the blockage has been cleared, retract the cable from the drain. To do this, squeeze the auto-feed trigger and turn the drum handle in the counter-clockwise direction. Once the cable is fully retracted, run hot water down the drain for a few minutes to flush out any remaining debris and to help clean the snake&apos;s cable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eEMidgtzf2A</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10724-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CIKmTpyy_Qo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Retract Snake — Drain Snaking</video:title>
      <video:description>Once the clog has been cleared, slowly retract the drain snake cable, reversing the steps you took during insertion, being careful not to twist the cable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CIKmTpyy_Qo</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10724-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mlM1kuECosQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Retract the Snake — Drain Snaking</video:title>
      <video:description>Once you believe the clog has been cleared, begin retracting the snake. Pull the snake back into the drum by reversing the feeding process. As the snake head comes out of the pipe, it may have debris from the clog wrapped around it. Be aware that some clogs, like those caused by grease, might be pushed through without being caught on the snake&apos;s head.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mlM1kuECosQ</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10725-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cu7bBVAvy6U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Drain Flow — Drain Snaking</video:title>
      <video:description>After clearing the line, go inside to the kitchen. Run a large volume of hot water into the sink. Pull the drain stopper and observe the drainage. The water should drain rapidly with a strong vortex, indicating that the clog has been successfully removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cu7bBVAvy6U</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10725-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FrVw-WhlgIQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test drain flow — Drain Snaking</video:title>
      <video:description>Test the drain. Run the water in the shower again to make sure the water drains properly. This confirms the clog has been successfully removed and the drain is functioning correctly. Pay attention to how fast the water is draining and if there is any standing water. If the drain is still draining slowly or there is standing water, repeat the snaking process or try other methods.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FrVw-WhlgIQ</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10725-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FrVw-WhlgIQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test drain flow — Drain Snaking</video:title>
      <video:description>Test the drain. Run the water in the shower again to make sure the water drains properly. This confirms the clog has been successfully removed and the drain is functioning correctly. Pay attention to how fast the water is draining and if there is any standing water. If the drain is still draining slowly or there is standing water, repeat the snaking process or try other methods.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FrVw-WhlgIQ</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10726-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jsaogl8g2T4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Store Drain Snake — Drain Snaking</video:title>
      <video:description>Rinse the drain snake with water and let it dry to prevent rust and buildup. Wrap the tip of the drain snake in toilet paper to avoid accidents, then feed the snake back into the canister, lock the lever and store in a safe place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jsaogl8g2T4</video:player_loc>
      <video:duration>117</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10726-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h0Vjz2GLfCs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Drain and Clean Up — Drain Snaking</video:title>
      <video:description>Once the drain has been snaked, remove the tool. Turn on the faucet to run water and test if the drain is now clear. The water should flow freely without backing up. Use a rag or paper towels to clean up any debris that was splattered onto the sink basin and surrounding areas. Check the plumbing underneath the sink to ensure no leaks were created during the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h0Vjz2GLfCs</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10726-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h0Vjz2GLfCs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Drain and Clean Up — Drain Snaking</video:title>
      <video:description>Once the drain has been snaked, remove the tool. Turn on the faucet to run water and test if the drain is now clear. The water should flow freely without backing up. Use a rag or paper towels to clean up any debris that was splattered onto the sink basin and surrounding areas. Check the plumbing underneath the sink to ensure no leaks were created during the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h0Vjz2GLfCs</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10711-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Septic Tank Access Points — Septic Tank Pumping</video:title>
      <video:description>The first step involves carefully locating the buried inlet and outlet access lids of the septic tank. This typically requires probing the ground and then digging to expose the lids. The video shows the process of excavating the soil to reveal these access points. Special care must be taken to avoid damaging any existing buried utility lines or irrigation systems during excavation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10711-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dZ9xUgOOElM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Septic Tank Lids — Septic Tank Pumping</video:title>
      <video:description>Begin by inspecting the septic tank lids. Ensure that all lids are accessible, not buried under excessive growth, and securely fastened with bolts. Unbolted lids can be extremely dangerous due to the risk of falling into the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dZ9xUgOOElM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10711-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZkRRxbq8DYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locating Septic Tank — Septic Tank Pumping</video:title>
      <video:description>Identify the location of the vent pipes on the roof, which usually align with the sewer pipes under the house leading to the cleanout and the septic tank. This helps approximate the tank location. Probe the ground to get a rough estimate of the tank&apos;s depth. The echo indicates the tank&apos;s position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZkRRxbq8DYs</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10712-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SurOHejmcZU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>pump out septic tank — Septic Tank Pumping</video:title>
      <video:description>Connect a large green corrugated hose to a septic pumping truck. Insert the end of the hose into the septic tank and begin pumping out the accumulated sludge and waste. The video shows the sludge being extracted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SurOHejmcZU</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10712-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Vacuum Pump for Pumping — Septic Tank Pumping</video:title>
      <video:description>Before pumping can begin, the specialized vacuum pump on the septic truck must be activated. The video shows the operator engaging the Masport Cobra LCW vacuum pump by flipping a switch on the control panel, setting it to vacuum mode. This creates the necessary suction to extract the contents from the septic tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10712-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pump Down Inlet Side — Septic Tank Pumping</video:title>
      <video:description>With the vacuum pump active, a large diameter vacuum hose is inserted into the inlet chamber of the septic tank. The pump then begins to draw out the liquid and semi-solid waste. Even if the scum layer at the top of the tank is not excessively thick, starting the pumping process is crucial for effective cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10713-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KiThznLYJ2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Access Septic Tank Lids — Septic Tank Pumping</video:title>
      <video:description>Begin by locating the septic tank lids. In this case, the customer had already dug up the outlet side lid. If the lids are buried, carefully excavate the soil around the access points until both the inlet and outlet lids are exposed and accessible. The video shows a shovel being used to clear soil around the access point. Note that septic tank lids can be heavy and require care when opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KiThznLYJ2U</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10713-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ShnwMn5Xo5U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify and Open Septic Tank Access — Septic Tank Pumping</video:title>
      <video:description>The host, wearing protective gloves, identifies the septic tank access point. It&apos;s marked by a small, round concrete cover that is partially obscured by dirt and grass. He removes the dirt and lifts the concrete cover to reveal the circular opening of the septic tank, allowing access for the sewer hose. He notes that this is indeed the septic tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ShnwMn5Xo5U</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10713-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Open Septic Tank Lids — Septic Tank Pumping</video:title>
      <video:description>Once the septic tank lids are exposed, carefully remove them to access the tank&apos;s chambers. The video demonstrates using a tool, possibly a small pickaxe or lid lifter, to pry open the lids. Special attention is required for the outlet side lid, as irrigation lines may be closely situated. The operator carefully shimmies off the lid to avoid breaking these lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10714-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pump Down Inlet Side — Septic Tank Pumping</video:title>
      <video:description>With the vacuum pump active, a large diameter vacuum hose is inserted into the inlet chamber of the septic tank. The pump then begins to draw out the liquid and semi-solid waste. Even if the scum layer at the top of the tank is not excessively thick, starting the pumping process is crucial for effective cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10714-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SurOHejmcZU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>pump out septic tank — Septic Tank Pumping</video:title>
      <video:description>Connect a large green corrugated hose to a septic pumping truck. Insert the end of the hose into the septic tank and begin pumping out the accumulated sludge and waste. The video shows the sludge being extracted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SurOHejmcZU</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10714-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZkRRxbq8DYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pumping and Rinsing — Septic Tank Pumping</video:title>
      <video:description>Pump out the septic tank until the bottom is visible. Rinse the bottom of the septic tank with a water hose to clean it. Ask someone to flush the toilet to make sure everything exits the house and enters the septic tank properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZkRRxbq8DYs</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10715-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Assessment and Completion — Septic Tank Pumping</video:title>
      <video:description>With the septic tank thoroughly cleaned and pumped down, a final assessment is made. The tank is visually inspected to ensure it is clear of waste and to check for any structural damage, such as cracks in the walls. Once confirmed to be in good condition, the lids are securely replaced. The professional indicates that the system is now properly maintained and should function effectively for the next three to five years, depending on usage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10715-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Pump Both Chambers — Septic Tank Pumping</video:title>
      <video:description>After the initial pumping and breakdown of solids, both chambers of the septic tank are thoroughly rinsed. The video shows a high-pressure water nozzle being used to spray down the tank walls and bottom, dislodging any remaining sludge and residue. The vacuum pump then extracts this rinse water, along with any newly dislodged solids, ensuring a complete and thorough cleaning of the tank&apos;s interior.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10715-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dZ9xUgOOElM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Septic Tank Lids — Septic Tank Pumping</video:title>
      <video:description>Begin by inspecting the septic tank lids. Ensure that all lids are accessible, not buried under excessive growth, and securely fastened with bolts. Unbolted lids can be extremely dangerous due to the risk of falling into the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dZ9xUgOOElM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10717-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8BDBsLYbYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure and Maintain Access Lids — Septic Tank Pumping</video:title>
      <video:description>Ensure all septic system access lids are easily accessible for maintenance and inspection, but most importantly, securely fastened to prevent accidental entry. These lids should ideally include a safety screen underneath to prevent small animals or children from falling into the tank. This is a critical safety measure for any household with a septic system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8BDBsLYbYI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10717-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dZ9xUgOOElM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Septic Tank Lids — Septic Tank Pumping</video:title>
      <video:description>Begin by inspecting the septic tank lids. Ensure that all lids are accessible, not buried under excessive growth, and securely fastened with bolts. Unbolted lids can be extremely dangerous due to the risk of falling into the tank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dZ9xUgOOElM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10717-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bJEm5WGfbYM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Septic Tank Lid — Septic Tank Pumping</video:title>
      <video:description>With the concrete lid successfully cast and demolded, it is carefully lowered back into the septic tank opening. The presenter uses lifting straps, connected to the embedded rebar handle, to safely maneuver the heavy concrete lid into its final position. The custom fit ensures a tight seal, which is crucial for preventing odors and maintaining the integrity of the septic system. He notes that while it might not be a &apos;perfect&apos; fit due to the irregular hole, it&apos;s a tight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bJEm5WGfbYM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10718-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7hpDfi-Aa4Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connecting and Discharging Septic Waste — Septic Tank Pumping</video:title>
      <video:description>A worker attaches the large, flexible discharge hose from the septic pump truck to a designated discharge point. While facilities may offer specific nozzles, it&apos;s common for waste to be discharged directly into a ground-level opening. The worker then opens a valve to release the accumulated septic waste from the truck, which flows out as a thick, dark material. The speaker highlights a past incident where a &apos;new guy&apos; was hit with sewage after standing in front of the valve, emphasizing the importance of proper procedure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7hpDfi-Aa4Y</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10718-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SurOHejmcZU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>pump out septic tank — Septic Tank Pumping</video:title>
      <video:description>Connect a large green corrugated hose to a septic pumping truck. Insert the end of the hose into the septic tank and begin pumping out the accumulated sludge and waste. The video shows the sludge being extracted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SurOHejmcZU</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10718-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7hpDfi-Aa4Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Facility Arrival and Access — Septic Tank Pumping</video:title>
      <video:description>The process begins with a septic pump truck arriving at a dedicated septic treatment plant. The driver navigates to the entrance and uses an identification badge to gain access to the secure facility. This highlights the controlled access required for waste disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7hpDfi-Aa4Y</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10719-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZkRRxbq8DYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pumping and Rinsing — Septic Tank Pumping</video:title>
      <video:description>Pump out the septic tank until the bottom is visible. Rinse the bottom of the septic tank with a water hose to clean it. Ask someone to flush the toilet to make sure everything exits the house and enters the septic tank properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZkRRxbq8DYs</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10719-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3mvpYQZ8NTM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Pump Both Chambers — Septic Tank Pumping</video:title>
      <video:description>After the initial pumping and breakdown of solids, both chambers of the septic tank are thoroughly rinsed. The video shows a high-pressure water nozzle being used to spray down the tank walls and bottom, dislodging any remaining sludge and residue. The vacuum pump then extracts this rinse water, along with any newly dislodged solids, ensuring a complete and thorough cleaning of the tank&apos;s interior.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3mvpYQZ8NTM</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10719-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Y31FugjuBho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse Septic Chambers — Septic Tank Pumping</video:title>
      <video:description>Once each chamber has been thoroughly pumped down and emptied of its main contents, rinse the interior surfaces with a water hose. Direct a strong stream of fresh water along the walls and bottom of the chambers, as well as any internal pipes or components, to dislodge any remaining solids, film, or residue. This step is important for a complete cleaning, helping to prevent future buildup, ensure the system&apos;s continued efficiency, and facilitate proper visual inspection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Y31FugjuBho</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10704-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qbt8UPyRPNU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Arrange Site Survey and Planning — Residential Solar Panel System</video:title>
      <video:description>Before any physical work begins, arrange for a reputable solar panel installation company to conduct a thorough site survey. During this survey, various factors will be assessed, including the size of your roof, the direction it faces (ideally East to West or South-facing for optimal sunlight exposure, avoiding North-facing), the amount of electricity you wish to generate, and your budget. This survey is crucial for developing a detailed plan for the installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qbt8UPyRPNU</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10704-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SD2uoj4-TW4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Site Assessment and Feasibility Study — Residential Solar Panel System</video:title>
      <video:description>Begin by assessing your property&apos;s suitability for solar panels. This involves evaluating your current energy consumption, checking for local regulations or homeowner association (HOA) restrictions (e.g., historical home restrictions on roof panels), and determining available space and sun exposure for either roof-mounted or ground-mounted systems. The video highlights a case where local regulations required a ground-mounted system. Understanding these initial constraints is vital before proceeding with design or application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SD2uoj4-TW4</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10704-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xGVOfox9xj0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Schedule and Undergo Site Visit and Estimate — Residential Solar Panel System</video:title>
      <video:description>The next crucial step involves a site visit conducted by a Solar Fast expert, which can be performed either in-home or remotely, depending on your preference and the assessment needs. The primary purpose of this visit is for the expert to thoroughly assess your property&apos;s suitability for solar panels, considering factors such as roof orientation, potential shading from trees or other structures, and the structural integrity of your roof. Based on this comprehensive assessment, they will recommend the most suitable solar solution specifically designed for your home and provide an independently verified saving estimate, outlining the expected financial benefits and return on investment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xGVOfox9xj0</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10705-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ToxFObjnlF0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Permits &amp; Plan Electrical/Structural Design — Residential Solar Panel System</video:title>
      <video:description>The creator explains the importance of obtaining both a building permit and an electrical code permit. He details the process for the building permit, which was relatively simple by checking a custom &quot;PV install&quot; box on the application. For the electrical code permit, he submitted a complex 16-page application containing detailed site plans, single-line diagrams, safety labels, attachment plans, datasheets for modules, optimizers, and inverters, a mounting system datasheet, an engineering letter, and fire/grounding certifications. He mentions using an online program to generate these professional documents and resorted to hand-drawing a simplified electrical diagram when the program proved too complex for a specific component. He also highlights the need to research the National Electrical Code (NEC) for wire types, conduit fill, and grid tie-in methods. Additionally, a structural engineer&apos;s approval for the roof trusses was required, which he obtained through an online service. Finally, an interconnection application with the power company was necessary to allow connection to the grid and receive credit for excess energy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ToxFObjnlF0</video:player_loc>
      <video:duration>231</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10705-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SD2uoj4-TW4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>System Design and Permitting Application — Residential Solar Panel System</video:title>
      <video:description>Work with your chosen solar installer to finalize the system design and apply for all required permits. This step involves creating detailed engineering plans for the solar array, electrical wiring, and mounting structures, tailored to your property&apos;s specific characteristics (e.g., roof type, ground space, sun exposure). The installer typically handles the submission of these plans to local building departments and other relevant authorities (e.g., historical review boards for historic homes) to obtain necessary building and electrical permits. The video explicitly mentions that installation only proceeds &apos;once all permits are secured.&apos;</video:description>
      <video:player_loc>https://www.youtube.com/embed/SD2uoj4-TW4</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10705-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B-WrrMI_x28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Certifications and Check Local Regulations — Residential Solar Panel System</video:title>
      <video:description>Before operating the DIY solar kit, confirm that the micro inverter has all necessary certifications, particularly UL 1741, which is crucial for safety and generally acceptable to electrical inspectors and utilities. Contact your local electrical inspector and utility provider to understand their specific requirements for plug-and-play solar systems. In some cases, while direct plug-in might be technically feasible, utilities may not approve net metering (crediting you for excess power sent back to the grid), or homeowners associations (HOAs) might have restrictions on ground-mounted systems. Ensure your installation meets all local codes and regulations to avoid issues.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B-WrrMI_x28</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10706-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sGKY04fPzfE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Mounting Rails — Residential Solar Panel System</video:title>
      <video:description>Once all roof attachments are in place, install the mounting rails. These aluminum rails run perpendicular to the rafters and are attached to the brackets previously installed. Use T-bolts or similar hardware to fasten the rails to the brackets. Ensure the rails are level and square across the entire array, as this will dictate the final alignment of the solar panels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sGKY04fPzfE</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10706-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7MQSiBRXf1g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mounting Rail Installation — Residential Solar Panel System</video:title>
      <video:description>Workers install long metal fixing rails onto the prepared roof surface. These rails typically attach to the roof&apos;s rafters or trusses using specialized mounts that are secured under the roof tiles without compromising waterproofing. These rails form the framework upon which the solar panels will be mounted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7MQSiBRXf1g</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10706-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A1DsT2mVSbA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Roof Mounting Brackets — Residential Solar Panel System</video:title>
      <video:description>After preparing the roof surface, transport the pre-assembled mounting brackets to the flat roof. Carefully position the brackets according to the pre-planned layout, ensuring proper spacing and alignment for the solar panels. Secure the brackets firmly to the roof surface using appropriate fasteners, taking care not to compromise the newly laid waterproofing. Double-check all connections and stability of the mounting system before proceeding to install the panels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A1DsT2mVSbA</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10707-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qbt8UPyRPNU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Solar Panels — Residential Solar Panel System</video:title>
      <video:description>With the rails firmly in position, the solar panels can now be installed. Carefully lift each solar panel onto the roof, typically using a hoist or carefully passing them up the scaffolding. Position the panels onto the secured rails and fasten them according to the manufacturer&apos;s instructions. This step requires precision to ensure proper alignment and secure attachment of each panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qbt8UPyRPNU</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10707-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sGKY04fPzfE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Solar Panels and Final Connections — Residential Solar Panel System</video:title>
      <video:description>Carefully lift and place each solar panel onto the rails, aligning them with the pre-marked layout. These panels can be heavy (e.g., 50 pounds), so exercise caution. Slide mounting bolts or clamps into the rail channels and position them to secure the solar panel frames. Tighten these bolts using an impact driver to firmly hold the panels in place. As each panel is installed, ensure the PV connectors from the panel are plugged into the microinverter and secured properly. Use cable clips (specifically designed for solar panels) to further secure the wires to the panel frame, preventing them from hanging loose or touching the roof surface, which could cause damage over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sGKY04fPzfE</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10707-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iMV0Jq3uO3M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Connect Solar Panels — Residential Solar Panel System</video:title>
      <video:description>Carefully transport the solar panels from the delivery vehicle to the roof using team lifting and a ladder or pulley system. Once on the roof, each panel is individually lifted and positioned onto the pre-installed rails. The panels are then secured to the rails using specialized end clamps and mid clamps, ensuring they are tightly fastened. The DC cables from each solar panel are connected to their corresponding micro-inverter. The AC cables from the micro-inverters are then connected to the Q-cable (AC branch cable) using secure, polarity-specific connectors. All cables are neatly routed and secured to the rails using cable clips and electrical tape to prevent snagging or damage. This process is repeated for all panels on both the south and west elevations of the roof.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iMV0Jq3uO3M</video:player_loc>
      <video:duration>310</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10708-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/khYZTmm7S5I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect All Components with Proper Wiring — Residential Solar Panel System</video:title>
      <video:description>The final step focuses on the essential wiring and connectors required to link all components of the solar system. For outdoor wiring from solar panels, use outdoor-rated cables or individual THHN/THWN wires housed inside electrical conduit for protection. MC4 connectors are recommended for solar panel connections due to their secure, weatherproof, and easy-to-use design (they provide an audible click when connected correctly). For wiring battery banks, heavier gauge wire (e.g., 2 gauge) is necessary due to the higher amperage, and specialized 3/8-inch or 5/16-inch copper lugs and heavy-duty crimpers are needed for secure connections. The overall system connection for an off-grid setup involves solar panels connecting to a PV combiner, then to an inverter, and finally to batteries. For a grid-tied setup, the solar panels connect to a PV combiner, then to an inverter, which then feeds into an AC disconnect box and finally into the main circuit breaker panel with a bidirectional meter from the utility company. This enables direct power from solar or selling excess power back to the grid.</video:description>
      <video:player_loc>https://www.youtube.com/embed/khYZTmm7S5I</video:player_loc>
      <video:duration>112</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10708-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jSa1tvrrFZg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Main Electrical Panel and Disconnect Switch — Residential Solar Panel System</video:title>
      <video:description>Connect the solar system&apos;s electrical output to the house&apos;s main electrical panel. This involves routing the combined AC power wires from the roof junction box through the wall (usually by drilling a hole in the panel to the outside) to an external solar disconnect switch and a combiner box (if applicable). This external disconnect switch, often a &quot;knife blade switch&quot;, allows all power from the solar panels to be safely cut off from the house and the grid, which is a critical safety feature for utility workers. From the disconnect, thick gauge wires are routed back into the main electrical panel, connecting to dedicated breakers (e.g., 20-amp breakers for each string). Remember to connect the ground wire to the grounding bar in the panel. Ensure all connections adhere to local electrical codes and the custom plan set.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jSa1tvrrFZg</video:player_loc>
      <video:duration>193</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10708-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ca1DVHBrqc0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect and Manage Panel Wiring — Residential Solar Panel System</video:title>
      <video:description>Once all solar panels are securely mounted, proceed with wiring them. For a series connection, connect the positive MC4 connector of one panel to the negative MC4 connector of the next panel in the string. All MC4 connectors are designed for easy, secure clipping. Use wire management clips to neatly tuck and secure all cables underneath the panels, preventing them from hanging loose or being damaged. In this specific system, two separate series strings (each consisting of three panels) are created. The combined positive and negative conductors from these two series strings are then connected to branch connectors (Y-connectors) to form a parallel connection. These combined conductors will then run into the MPPT charge controllers located inside the shed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ca1DVHBrqc0</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10709-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dO3fkvQ-4Mg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ground the Solar System — Residential Solar Panel System</video:title>
      <video:description>To ensure the safety of the entire off-grid solar system, it must be properly grounded. A copper ground rod is driven into the earth near the greenhouse. A green ground wire is then connected from the power distribution panel to this ground rod. The video shows using a crimped lug on the ground wire, which is then connected to a grounding terminal on the power distribution panel (likely on the inverter or charge controller housing) and secured with a screw. The other end of the green ground wire is connected to a clamp that secures it tightly to the copper ground rod using a screwdriver. Grounding provides a safe path for stray electrical currents, protecting equipment and personnel from electrical shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dO3fkvQ-4Mg</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10709-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EuDrByddBeY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final System Bonding and Earth Ground Connection — Residential Solar Panel System</video:title>
      <video:description>After all panels are installed and bonded to the racking, the entire metallic structure (panel frames, Unistrut rails, inverter enclosures) must be interconnected with a continuous equipment grounding conductor. This conductor is then connected to a main grounding electrode (e.g., a copper ground rod or a UFER ground) buried in the earth. While the video doesn&apos;t show the explicit installation of the grounding electrode, this step is fundamental to a safe and code-compliant solar electrical system. The grounding system&apos;s purpose is to safely dissipate electrical faults and lightning strikes into the earth, protecting personnel and equipment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EuDrByddBeY</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10709-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s9SoXtZPxZE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>DC System Grounding — Residential Solar Panel System</video:title>
      <video:description>Proper grounding is crucial for safety and to protect equipment from surges. Connect a dedicated ground wire from the common negative busbar (where the battery negative, MPPT negative, and inverter negative connect) to a ground rod or the main grounding system of the premises. The diagram shows a green ground wire originating from the MPPT (representing the DC common bus) and connecting to an earth ground symbol. This ensures that any fault currents on the DC side of the system are safely diverted to the earth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s9SoXtZPxZE</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10710-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C7cEoI0MMGU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>System Commissioning and Testing — Residential Solar Panel System</video:title>
      <video:description>After all physical assembly and electrical wiring are complete, the final essential step is to commission and thoroughly test the solar tracking system. This involves carefully powering up the entire system, verifying the functionality of the tracking motors and sensors, confirming that the panels move accurately to follow the sun&apos;s path, and checking the electrical output of the solar array using diagnostic tools like a multimeter or clamp meter. Ensure all safety features are operational and that the system is producing power as expected, confirming the successful installation and readiness for optimal operation. This step also includes any final programming or calibration of the tracking control unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C7cEoI0MMGU</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10710-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ToxFObjnlF0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Grid &amp; Pass Inspection — Residential Solar Panel System</video:title>
      <video:description>After all inspections are passed and the bi-directional meter is installed, the final step is to activate the solar system. The creator demonstrates pulling the safety switch from the &quot;off&quot; to the &quot;on&quot; position, connecting the system to the grid. He shows the inverter display initializing and sensing the power optimizers, indicating the system is beginning to produce power. The production meter starts at zero and then increments, confirming energy generation. Over a year later, the system has successfully eliminated his monthly electricity bills and, thanks to renewable energy credits, he is actually making money each month. The video concludes with a positive reflection on the rewarding experience of installing the power plant himself and the ongoing success of the system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ToxFObjnlF0</video:player_loc>
      <video:duration>86</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10710-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bTAUlJlECSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Inverter and Commission System — Residential Solar Panel System</video:title>
      <video:description>This final major step involves installing the inverter, which converts the DC electricity from the solar panels into AC electricity usable by the home. The video shows two Luminous inverters mounted on a wall with associated distribution boxes (0:23-0:26, 0:45-0:47). The inverter is connected to the DC wiring from the panels and to the home&apos;s main electrical panel (AC side). After installation, the entire solar power system is commissioned, which includes testing, verification of proper operation, and integration with the utility grid if it&apos;s a grid-tied system. This step typically requires a certified electrician.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bTAUlJlECSI</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10694-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B4N81fAd-kw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unplug Refrigerator — Refrigerator Repair</video:title>
      <video:description>Before beginning any repair, ensure you unplug the refrigerator&apos;s power cord from the electrical outlet to prevent electrical shock. This is a critical safety step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B4N81fAd-kw</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10694-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c7FRHKyTqYE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unplug the Refrigerator — Refrigerator Repair</video:title>
      <video:description>Before beginning any work on the refrigerator, ensure it is completely powered off by unplugging the power cord from the electrical outlet. This is a crucial safety step to prevent electrical shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c7FRHKyTqYE</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10694-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bPJM0TCaQDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unplug Refrigerator Power — Refrigerator Repair</video:title>
      <video:description>Before beginning the repair, ensure the refrigerator is completely unplugged or the power supply to it is disconnected. This is a critical safety step to prevent electrical shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bPJM0TCaQDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10695-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IeGGNSwLRqE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Power Supply — Refrigerator Repair</video:title>
      <video:description>Begin by checking if the refrigerator is receiving power. Open the refrigerator door and observe if the interior light turns on. If the light does not illuminate, inspect the power cord to ensure it is securely plugged into the electrical wall outlet and that the cord itself is not damaged. To confirm the electrical outlet is functional, plug in another small appliance, such as a lamp or a radio, to see if it powers on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IeGGNSwLRqE</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10695-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jSW9zdZezmM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Power Supply and Electrical Connections — Refrigerator Repair</video:title>
      <video:description>If the refrigerator is not refrigerating, first check the power supply. Verify that the power plug is securely connected to the electrical outlet. If it&apos;s disconnected, plug it back in. Also, check your home&apos;s circuit breaker panel or fuse box to ensure that the refrigerator&apos;s circuit breaker has not tripped or that a fuse hasn&apos;t blown. To quickly check for a power issue within the refrigerator itself, open the refrigerator door and observe if the interior lamp is lit. If the lamp is not lit, it indicates a lack of electrical supply to the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jSW9zdZezmM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10695-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wcOE7MmHR78/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Power Connection — Refrigerator Repair</video:title>
      <video:description>If the refrigerator is experiencing &apos;no refrigeration,&apos; the first step is to check if the power plug is disconnected from the electrical outlet. If it is, securely re-plug it into the socket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wcOE7MmHR78</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10696-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VHOXX_yq_F4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Clean Condenser Coils — Refrigerator Repair</video:title>
      <video:description>Access the back of the refrigerator, ensuring it is unplugged for safety. Locate the condenser coils, which are typically found at the bottom rear of the unit. Inspect these coils for any accumulation of dust, pet hair, or other debris. The video shows heavily caked coils. Clean the condenser coils thoroughly using a vacuum cleaner with a brush attachment or a coil brush to remove all buildup. This improves airflow and heat dissipation, which is crucial for proper cooling. Also, check if the condenser fan is running and if the compressor is warm and humming, indicating it&apos;s operating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VHOXX_yq_F4</video:player_loc>
      <video:duration>85</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10696-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QZrQ3Y5n-o4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Condenser Coils — Refrigerator Repair</video:title>
      <video:description>Locate the condenser coils, typically found at the rear of the refrigerator behind an access panel. Remove the access panel to expose the coils. Once exposed, use a vacuum cleaner with a brush attachment or a condenser cleaning brush to carefully remove any accumulated dust, pet hair, and debris from the coils and the surrounding area, including the compressor and fan. Clean until the coils are visibly clear of obstructions. Dirty coils hinder the refrigerator&apos;s ability to dissipate heat, causing it to run longer and potentially warm up the freezer and refrigerator compartments. Regular cleaning (at least once a year) can improve efficiency by up to 30%.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QZrQ3Y5n-o4</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10696-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xj2jEaL_D_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Dirty Condenser Coils — Refrigerator Repair</video:title>
      <video:description>Condenser coils are essential for refrigeration, as they release heat from the refrigerator into the surrounding environment. Over time, these coils can accumulate dust and dirt, reducing their efficiency. Locate the condenser coils, typically found at the back or underneath the refrigerator. Inspect them for excessive dust build-up. Additionally, check the vent holes that allow air to flow over the coils. If they are clogged with dust or debris, clean them thoroughly. This can be done using a vacuum cleaner with a brush attachment or a long-handled brush to remove dust and lint. Regular cleaning of these coils can significantly improve your refrigerator&apos;s cooling performance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xj2jEaL_D_w</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10697-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9jinCPuo4eQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Door Seals and Lights — Refrigerator Repair</video:title>
      <video:description>Test the operation of both the refrigerator and freezer doors. Open and close each door several times to check for smooth movement and proper latching. While the doors are open, observe if the interior lights illuminate and turn off when the door is closed (or when the light switch is pressed). Next, examine the door gaskets (seals) for any tears, cracks, or signs of wear, ensuring they create a tight seal when the doors are closed. You can perform a &apos;paper test&apos; by closing a dollar bill or a piece of paper in the door; if it pulls out easily, the seal might be compromised.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9jinCPuo4eQ</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10697-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/At7hRY3bmj4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Maintain Door Seals — Refrigerator Repair</video:title>
      <video:description>Regularly inspect the door seals of your fridge freezer for any signs of wear, tear, or damage. An ineffective door seal will allow cold air to escape, causing the appliance to work harder and consume more energy. To test the seal&apos;s effectiveness, place a 5-pound note (or similar thin paper) between the door and the fridge freezer frame, then close the door. If the note drops down or can be pulled out easily, the seal needs to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/At7hRY3bmj4</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10697-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fv1OVYRzxJM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Door Seal Issue — Refrigerator Repair</video:title>
      <video:description>Begin by identifying the symptoms of a faulty refrigerator door seal. These can include frost build-up on the inside of the freezer compartment, which indicates warm air entering. You can also visually inspect the gasket for any visible gaps or hardened sections. For a more definitive test, place a flashlight inside the refrigerator or freezer and close the door. If light is visible from the outside, there is a gap in the seal. Pay particular attention to the top and bottom of the door, as heat tends to rise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fv1OVYRzxJM</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10698-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_m7pW3PueJs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Evaporator Fan Motor Operation — Refrigerator Repair</video:title>
      <video:description>To quickly test the evaporator fan motor, open the freezer door. Normally, the fan should turn off when the door is open. To simulate the door being closed, press the door switch (often found in the door frame). With the switch held down, listen or look into the compartment to ensure the fan motor is running. If the fan is not running, further testing with a voltmeter is needed to confirm it is receiving adequate power, which will help determine if the fan motor itself has failed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_m7pW3PueJs</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10698-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NU1DMYBkQVg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Confirm Evaporator Fan Malfunction — Refrigerator Repair</video:title>
      <video:description>Open the freezer door and listen carefully. The user notes a crackling sound, which indicates that the evaporator coil is actively freezing up, confirming the compressor is working. However, the evaporator fan motor is still not audible, confirming it is not circulating cold air. This observation strongly suggests that the evaporator fan motor is faulty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NU1DMYBkQVg</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10698-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/72_ePKrOn5c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Evaporator Fan Motor — Refrigerator Repair</video:title>
      <video:description>If the refrigerator section is warm, a failing evaporator fan motor could be the cause. To check, open the freezer door and listen for the fan motor running. If it&apos;s silent, you need to access it. Begin by opening the freezer door and removing all contents and shelving. Next, remove the four shelving brackets by unscrewing them with a 1/4&quot; nut driver. Then, use the 1/4&quot; nut driver to remove the four screws that hold the rear panel in place. Carefully detach and remove the rear panel. Once the rear panel is out of the way, you will be able to locate the evaporator fan motor, which is typically situated above the evaporator coils in the center of the freezer compartment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/72_ePKrOn5c</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10699-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_m7pW3PueJs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Condenser Fan Motor — Refrigerator Repair</video:title>
      <video:description>Inspect the condenser fan motor, which is situated on the back of the refrigerator, near the compressor. This motor&apos;s function is to blow air across the condenser coils, dissipating the heat generated during the cooling process. If the condenser fan motor fails, heat will not be effectively removed from the refrigerant, causing the refrigerator to either cool inefficiently or stop cooling altogether. To determine if the fan motor is working, remove the refrigerator&apos;s rear cover and visually inspect the motor. If it is not running when the compressor is on, it may have failed. Similar to the evaporator fan, further testing with a voltmeter is recommended to ensure it&apos;s receiving power before concluding the motor is faulty.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_m7pW3PueJs</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10699-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/O-4mhq65tyU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Condenser Fan Motor — Refrigerator Repair</video:title>
      <video:description>Inspect the condenser fan motor, which is responsible for drawing air through the condenser coils and over the compressor. If this motor is not working properly, the refrigerator will not cool efficiently. First, check the fan blade for any obstructions like dust bunnies or debris that might be preventing it from spinning. Next, try turning the fan motor blade by hand. If it does not spin freely, the motor is likely defective and should be replaced. If there are no obstructions and the blade spins freely, use a multimeter to test the fan motor for electrical continuity. If the condenser fan motor does not have continuity, it needs to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/O-4mhq65tyU</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10699-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BYdCp3M7Pfs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Condenser Fan — Refrigerator Repair</video:title>
      <video:description>With the back cover still off, plug the refrigerator back in. Locate the condenser fan, which is typically found between the compressor and the condenser coils. Observe if the fan is spinning. If it&apos;s not spinning, unplug the refrigerator again and carefully attempt to spin the fan blades by hand to check for any physical obstructions. Inspect the fan for signs of rust or damage. A non-functioning condenser fan can prevent the refrigerator from cooling effectively, similar to dirty coils.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BYdCp3M7Pfs</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10700-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XraCChCPmAs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Compressor Relay and Overload Protector — Refrigerator Repair</video:title>
      <video:description>If the refrigerator&apos;s internal light turns on but the compressor does not produce any sound (indicating it&apos;s not starting), the problem likely lies with the compressor&apos;s relay and overload protector. Locate these components at the back of the refrigerator, usually attached to the compressor. Take a clear photograph of how the wires are connected to the relay and overload protector before carefully disconnecting them. These parts can be purchased online (e.g., from Amazon). Note that relays come in various pin configurations (2-pin, 3-pin, 4-pin), so ensure you order the correct type for your refrigerator. Once the new parts are acquired, re-attach them to the compressor, making sure to follow the connection pattern captured in your photo. After replacement, plug the refrigerator back in and check if the compressor starts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XraCChCPmAs</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10700-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9kJ_jxM4udA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Overload Protection and Relay — Refrigerator Repair</video:title>
      <video:description>With the housing removed, you will see the overload protection and the relay connected directly to the compressor pins. In this specific mini-fridge, the overload protection (white component) is on top, and the relay (black component) is beneath it. Gently grab each component and wiggle it back and forth to detach it from the compressor pins. The components are push-fit, so they should come off with a firm but gentle pull. Be careful not to bend the compressor pins.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9kJ_jxM4udA</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10700-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4bW8IVCY1Jw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Relay and/or Overload Protector — Refrigerator Repair</video:title>
      <video:description>Before replacing, you can optionally test the old start relay with a multimeter for continuity to confirm it&apos;s faulty. Once confirmed, install the new start relay by carefully plugging it back onto the compressor prongs and reattaching all the wires according to the picture you took. The speaker notes that if replacing the start relay does not resolve the issue, the overload protector, a small black component usually located adjacent to the relay, might be the problem. It is an inexpensive part and can be replaced if the relay replacement is unsuccessful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4bW8IVCY1Jw</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10701-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hxy59QedQII/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Temperature Control Thermostat — Refrigerator Repair</video:title>
      <video:description>Evaluate the temperature control thermostat if the refrigerant system is not running. The thermostat is crucial for directing voltage to the compressor and fan motors. To check it, rotate the thermostat knob from the lowest to the highest setting and listen for an audible click. If it clicks, it&apos;s likely not defective. If it doesn&apos;t click, or if a multimeter test reveals no continuity at any setting, replace the temperature control thermostat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hxy59QedQII</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10701-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aOHDM6NRuZY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check the Temperature Control Thermostat — Refrigerator Repair</video:title>
      <video:description>The temperature control thermostat is a key component responsible for regulating the operation of the compressor, evaporator fan motor, and condenser fan motor. A malfunctioning thermostat can lead to the refrigerator not maintaining the correct temperature, causing it to run warm. One method to check the thermostat is to rotate its dial from the lowest temperature setting to the highest. As you turn the dial, listen closely for an audible &apos;click,&apos; which indicates the internal switch is engaging. If you do not hear a click, or if further testing with a multimeter reveals that the thermostat does not have continuity at all settings, it suggests the thermostat is faulty and requires replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aOHDM6NRuZY</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10701-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1x3XYL4atao/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Temperature Control Thermostat — Refrigerator Repair</video:title>
      <video:description>The temperature control thermostat is responsible for regulating the operation of the compressor, evaporator fan motor, and condenser fan motor, thereby maintaining the desired temperature. If your refrigerator is warm, the thermostat might be faulty. One way to check the thermostat is to rotate its dial from the lowest setting to the highest setting. Listen carefully to hear if you hear a distinct &apos;click&apos; sound. If you do not hear a click, or if you want a more thorough diagnosis, use a multimeter to check the thermostat for continuity at all settings (lowest, medium, highest). If the thermostat is faulty at any setting, it will need to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1x3XYL4atao</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10702-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0njbDW2tWx0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Internal Defrost System Components — Refrigerator Repair</video:title>
      <video:description>If the door seals are confirmed to be in good condition but excessive frost buildup or cooling issues persist, the problem may lie within the defrost system. This involves checking specific components: the defrost thermostat, the defrost heater, and the defrost control. The defrost thermostat monitors the evaporator coil temperature, the defrost heater melts the frost, and the defrost control manages the defrost cycles. Proper diagnosis often requires a multimeter to test continuity and resistance of these components, and you may need a screwdriver to access internal panels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0njbDW2tWx0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10702-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BYdCp3M7Pfs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Defrost System (Evaporator Coils and Thermostat) — Refrigerator Repair</video:title>
      <video:description>To inspect the internal cooling components, open the freezer door. Before proceeding, ensure the refrigerator is unplugged from the wall to prevent injury. Remove any shelves inside the freezer compartment. You will need to remove between four and six screws that secure the thin metal piece covering the evaporator coils. If you encounter a significant amount of snow or ice built up on the back of this panel or on the coils themselves, it indicates a problem with the defrost system. Look for the defrost thermostat and the freezer sensor (also called a defrost sensor) at the top of the evaporator coils. A swollen defrost thermostat unit is a clear sign it&apos;s faulty and needs to be replaced. For a more precise test, a technician can check the thermostat&apos;s continuity when cooled below 30 degrees Fahrenheit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BYdCp3M7Pfs</video:player_loc>
      <video:duration>129</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10702-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QZrQ3Y5n-o4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Defrost Heater — Refrigerator Repair</video:title>
      <video:description>The defrost heater melts ice from the evaporator coils during the defrost cycle. Like the thermostat, it&apos;s typically located behind the back wall of the freezer section, along the sides and bottom of the evaporator. If the defrost heater fails, ice will accumulate on the evaporator, preventing cold air from circulating to the fresh food section, making the refrigerator warm while the freezer is less affected. To test the defrost heater, remove its wires and set a multimeter to continuity mode. Touch a test probe to each end of the heater. If there&apos;s no continuity, the heater is faulty and needs to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QZrQ3Y5n-o4</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10703-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OWgZg8BD21o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Test Water Inlet Valve — Refrigerator Repair</video:title>
      <video:description>The water inlet valve controls the flow of water into the refrigerator for both the ice maker and dispenser. It is usually located at the back of the machine behind an access panel, though some models may have it in the fresh food section. Locate the ice maker solenoid, which is the component connected to the ice maker&apos;s water supply line. Remove the wiring harness connected to the solenoid. Set your digital multimeter to continuity mode. Touch one probe to each terminal of the solenoid. A working solenoid should show continuity. If there is no reading, the solenoid has failed. Failures can also be caused by a jammed plunger or a clog. Additionally, check the ice maker fill tube (a plastic tube on the back of the unit that guides water into the ice mold). If it&apos;s frozen, this usually indicates a small leak in the water valve&apos;s diaphragm, which can block water flow to the ice maker. If the solenoid fails or the diaphragm leaks, the entire water inlet valve will need to be replaced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OWgZg8BD21o</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10703-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wsjssk4QCFM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Water Inlet Valve — Refrigerator Repair</video:title>
      <video:description>Identify the electronic water inlet valve, often a small green plastic component with electrical contacts and a metal bracket, usually located at the back of the refrigerator or near the bottom. This valve is crucial as it receives electronic signals from the refrigerator&apos;s control system to open and allow water flow to both the ice maker and the water dispenser. The valve has distinct ports: one connects to the main water supply line from your household plumbing (which is always under pressure), and the other routes water through a plastic tube directly into the refrigerator for dispensing and ice production.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wsjssk4QCFM</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10703-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qmFBL5xAUeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Water Inlet Valve — Refrigerator Repair</video:title>
      <video:description>The water inlet valve is a critical component that regulates water flow into the refrigerator for both the icemaker and the dispenser. It&apos;s often found at the back of the appliance, behind an access panel, but in some models, it might be located within the fresh food section. Common issues include a faulty solenoid, a jammed plunger, or a clog. First, verify that your house&apos;s water pressure is adequate for the refrigerator to function correctly, referring to your appliance&apos;s manual for specific pressure requirements. If the water dispenser solenoid is suspected to be faulty, locate the valve (typically identified by a larger 5/16 inch line for the dispenser) and test its continuity using a multimeter. If the solenoid lacks continuity, it&apos;s defective and the valve needs replacement. If the solenoid tests okay, temporarily restore power and water, disconnect the 5/16 inch water line from the valve, and check if water flows out when the dispenser is activated. If no water flows, the valve is likely clogged or damaged and requires replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qmFBL5xAUeQ</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10687-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Qwk1rER_EFM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan TV Placement and Locate Studs — Television Mounting</video:title>
      <video:description>To ensure a clean installation with hidden wires, it&apos;s crucial to align the TV mounting bracket with an existing electrical outlet&apos;s stud bay. Use a stud finder (e.g., Zircon Stud Finder) to accurately locate the studs within the wall. Once the studs are found, identify the center of a stud within the desired mounting area and mark this point. The goal is to install the bracket into the studs for maximum security. The video mentions the bracket is spaced for 16-inch studs, which is a common residential standard.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Qwk1rER_EFM</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10687-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U6KBfh_Bimw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Mark Wall Studs — Television Mounting</video:title>
      <video:description>After marking the approximate top center of where the wall mount will go, use a stud finder to precisely locate the vertical wooden studs behind the drywall. It is crucial to mount heavy items like TVs (or safes) directly into these studs for maximum security and load-bearing capacity. Scan the area around your marked point horizontally to find the edges of the stud, then mark the center. Some modern homes may have studs spaced 24 inches apart, while older homes commonly use 16-inch spacing. Confirm the spacing as this will affect how many studs your wall mount can attach to.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U6KBfh_Bimw</video:player_loc>
      <video:duration>101</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10687-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hN7HX_X8rhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Wall Studs — Television Mounting</video:title>
      <video:description>Begin by removing any existing TV or furniture from the wall. Then, use a stud finder, specifically a Zircon Edge Finding stud finder as shown in the video, to locate the wooden studs within the wall. Once a stud is detected, mark its edges with a pencil directly on the wall or on a piece of painter&apos;s tape placed horizontally on the wall. This ensures accurate placement of the TV mount&apos;s lag screws, providing a secure anchor point.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hN7HX_X8rhE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10688-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LBeZYCH5iwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Studs and Mark Pilot Holes — Television Mounting</video:title>
      <video:description>After deciding on the TV&apos;s position, use a stud finder (e.g., RYOBI) to locate the wall studs behind the chosen area. Run the stud finder horizontally along the wall, marking the edges and center of each stud with a pencil. This is crucial for securely mounting the TV to the structural framing of your wall. Once the stud locations are accurately marked, hold the TV wall mount bracket against the wall at the desired height, aligning it with the marked stud centers. Use a level (e.g., Husky 24-inch) to ensure the bracket is perfectly horizontal, then mark the exact spots for drilling pilot holes through the mount&apos;s designated screw holes into the center of the studs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LBeZYCH5iwQ</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10688-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cuI0_0Bb7ic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Pilot Holes and Find Studs — Television Mounting</video:title>
      <video:description>Combine the horizontal center mark and the vertical bottom-of-TV mark. From the bottom-of-TV mark, measure upwards the dimension you recorded earlier (e.g., 17 and 1/8 inches) from Step 3. This new mark indicates where the top screw holes of your wall mount will align. Use a level to draw a straight horizontal line across this new mark, ensuring accuracy. Then, use a stud finder to locate the studs along this horizontal line. Mark the edges and center of each stud. Ideally, your wall mount will span two studs. In some cases, like the one shown, the desired center of the TV might be close to the center of a single stud. Adjust the horizontal placement of the mount slightly to ensure it can be securely fastened to at least two studs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cuI0_0Bb7ic</video:player_loc>
      <video:duration>177</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10688-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Qwk1rER_EFM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan TV Placement and Locate Studs — Television Mounting</video:title>
      <video:description>To ensure a clean installation with hidden wires, it&apos;s crucial to align the TV mounting bracket with an existing electrical outlet&apos;s stud bay. Use a stud finder (e.g., Zircon Stud Finder) to accurately locate the studs within the wall. Once the studs are found, identify the center of a stud within the desired mounting area and mark this point. The goal is to install the bracket into the studs for maximum security. The video mentions the bracket is spaced for 16-inch studs, which is a common residential standard.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Qwk1rER_EFM</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10689-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hN7HX_X8rhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install TV Wall Mount (Part 1) — Television Mounting</video:title>
      <video:description>Align the TV wall mount with the marked stud locations. Using a DeWalt cordless drill, drill pilot holes through the mount&apos;s designated screw holes and into the center of the wall studs. Hold a dustpan below the drilling area to catch any drywall or wood debris. Once pilot holes are drilled, secure the wall mount to the studs using the provided lag screws and the cordless drill. Ensure the mount is firmly attached to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hN7HX_X8rhE</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10689-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cuI0_0Bb7ic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-Drill Pilot Holes — Television Mounting</video:title>
      <video:description>Using the previously marked pilot hole locations (on the studs), take your drill and the appropriate 3/16 inch or 7/32 inch drill bit. Carefully pre-drill a pilot hole at each marked location. It&apos;s crucial to use a drill bit that is slightly smaller than the lag screws you will be using. This allows the lag screws to tightly grip the wood of the studs, ensuring a secure mount. Before drilling, check the other side of the wall for any obstructions or electrical wires. If an electrical wire is present, it should ideally be protected by a metal plate behind the drywall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cuI0_0Bb7ic</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10689-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LBeZYCH5iwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wall Mount — Television Mounting</video:title>
      <video:description>With the pilot holes marked, use a drill (e.g., RYOBI) with an appropriate drill bit to create pilot holes into the center of the studs. The video shows a person wearing safety glasses while drilling, which is important for eye protection. Once the pilot holes are drilled to the correct depth, position the TV wall mount bracket against the wall, aligning its screw holes with the freshly drilled pilot holes. Then, use the drill to drive the mounting screws (typically lag bolts provided with the mount) securely into the pilot holes. Tighten them firmly but avoid over-tightening to prevent stripping the wood or damaging the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LBeZYCH5iwQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10690-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cuI0_0Bb7ic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Wall Mount to Studs — Television Mounting</video:title>
      <video:description>Align the wall mount with the pre-drilled pilot holes. Insert the lag screws that came with your TV wall mount into the holes, starting by hand to ensure they catch the threads. Then, use your drill with a socket adapter (or an impact driver if you have one) to drive the lag screws into the studs. If you don&apos;t have a power tool for this, a socket wrench can be used. Do not fully tighten the screws yet; leave them slightly loose. This allows for final leveling adjustments.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cuI0_0Bb7ic</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10690-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Qwk1rER_EFM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the TV Wall Mount Bracket — Television Mounting</video:title>
      <video:description>Using a cordless drill, pre-drill the first pilot hole directly into the center of the marked stud. Once the hole is drilled, partially insert one of the lag bolts (typically provided with the TV mount) into the pre-drilled hole. Keep the bolt slightly loose to allow for adjustment. With the first bolt in place, hold the TV bracket up against the wall and use a level (the bracket shown comes with a small magnetic level) to ensure the bracket is perfectly horizontal. Once level, pre-drill the remaining holes into the studs, and then fully secure all lag bolts using a wrench or a powerful drill/driver to ensure a super secure mounting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Qwk1rER_EFM</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10690-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hN7HX_X8rhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install TV Wall Mount (Part 1) — Television Mounting</video:title>
      <video:description>Align the TV wall mount with the marked stud locations. Using a DeWalt cordless drill, drill pilot holes through the mount&apos;s designated screw holes and into the center of the wall studs. Hold a dustpan below the drilling area to catch any drywall or wood debris. Once pilot holes are drilled, secure the wall mount to the studs using the provided lag screws and the cordless drill. Ensure the mount is firmly attached to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hN7HX_X8rhE</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10691-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MQ2O7c8BSDY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unpack Mount and Prepare TV — Television Mounting</video:title>
      <video:description>The presenter unboxes the wall mount, taking out the vertical arms and the wall plate. He notes that the mount includes universal screw sizes. He explains the importance of using longer screws and spacers for the vertical arms to create clearance for HDMI cables and ensure adequate air circulation to prevent the TV from overheating. He tests a screw in the TV&apos;s mounting hole for fit. He demonstrates how the locking tabs on the arms work (pull to unlock, push to lock). He then attaches a screw, a washer, and a spacer to the top hole of one arm, leaving about half an inch of screw protruding to avoid damaging the TV internals. He hand-screws the vertical arms onto the back of the TV using a Phillips head screwdriver, ensuring they are securely fastened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MQ2O7c8BSDY</video:player_loc>
      <video:duration>103</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10691-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6DpuvKG10KA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Monitor Brackets to TV — Television Mounting</video:title>
      <video:description>Begin by attaching the monitor brackets, which are part of the SANUS mounting kit, to the back of your flat-panel TV. Locate the four mounting holes on the back of the TV. Select the appropriate diameter of bolts from the included hardware that are compatible with your TV&apos;s mounting holes. If you are unsure which mounting holes or bolt size to use, consult your television&apos;s manual. Choose a bolt length that is neither too long nor too short for a secure fit. If there are any obstructions on the back of the TV, such as uneven surfaces, or if you need additional space for cables, use the provided spacers to create extra room between the TV and the mount. Securely tighten the bolts, ensuring the brackets are firmly attached.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6DpuvKG10KA</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10691-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U6KBfh_Bimw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach TV Brackets to Television — Television Mounting</video:title>
      <video:description>Attach the vertical bracket arms (often referred to as TV brackets) to the back of the television. Most TV mounts come with a variety of screws, nuts, and washers to accommodate different TV models and VESA mounting patterns. Select the screws that best fit the threaded holes on the back of your TV. If the provided screws are too long, use the plastic rigid washers (spacers) included in the kit to create a gap and ensure the screws don&apos;t bottom out or damage internal components. Securely tighten all four screws, ensuring the brackets are firm and correctly aligned.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U6KBfh_Bimw</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10692-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6VqE8dwlJUo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang TV onto Mount — Television Mounting</video:title>
      <video:description>With the wall bracket securely in place, it&apos;s time to hang the TV. This step often requires two people due to the size and weight of modern televisions. Carefully lift the TV, aligning the brackets on the back of the TV with the arms of the wall mount. Guide the TV onto the mount, ensuring that the brackets engage properly. Once the TV is hung, secure it to the mount using the locking mechanisms or screws provided with your specific TV mount. The video shows tightening a bolt on the horizontal bracket using a socket wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6VqE8dwlJUo</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10692-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y0MBMDXFQE0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the TV — Television Mounting</video:title>
      <video:description>With a helper, carefully lift the TV. Align the tapered end of the TV bracket (which was pre-assembled onto the TV) with the hook on the articulating arm. Gently lower the TV until the bracket hooks securely into the arm. Once the TV is hanging, insert and tighten any locking screws at the bottom of the TV bracket to prevent accidental removal and ensure it is firmly attached to the articulating arm. The TV is now securely mounted to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y0MBMDXFQE0</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10692-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LBeZYCH5iwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount TV to Wall — Television Mounting</video:title>
      <video:description>With the wall mount installed and the TV-side brackets attached, it&apos;s time to mount the TV. This step usually requires two people due to the size and weight of flat screen TVs, especially larger models. Carefully lift the TV, aligning the brackets on the back of the TV with the wall mount. Gently hook or slide the TV into place, following the specific instructions for your mount type. Once the TV is on the mount, make sure it is securely seated and locked into position. Many mounts have safety latches, tightening screws, or pull strings that need to be engaged to prevent the TV from accidentally coming off the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LBeZYCH5iwQ</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10693-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U6KBfh_Bimw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang and Secure Television — Television Mounting</video:title>
      <video:description>Carefully lift the television and align the attached TV brackets with the wall mount. Gently hook the TV onto the wall mount, ensuring it is seated properly. Once the TV is hanging, locate the locking screws or mechanisms underneath the TV brackets. Tighten these screws to secure the TV to the wall mount, preventing accidental dislodgement. Perform a final check to ensure the TV is stable and all connections are snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U6KBfh_Bimw</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10693-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y0MBMDXFQE0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the TV — Television Mounting</video:title>
      <video:description>With a helper, carefully lift the TV. Align the tapered end of the TV bracket (which was pre-assembled onto the TV) with the hook on the articulating arm. Gently lower the TV until the bracket hooks securely into the arm. Once the TV is hanging, insert and tighten any locking screws at the bottom of the TV bracket to prevent accidental removal and ensure it is firmly attached to the articulating arm. The TV is now securely mounted to the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y0MBMDXFQE0</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10693-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6VqE8dwlJUo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Adjustments and Cable Management — Television Mounting</video:title>
      <video:description>Once the TV is hung and initially secured, make final adjustments. Use a level to ensure the TV is perfectly horizontal. You can then use the mount&apos;s fine adjustments to pan, swivel, or tilt the TV to achieve the optimal viewing angle in your room. If your mount includes cable management clips, route your cables through them for a clean and organized look, concealing them behind the TV and mount. After all adjustments are complete and you are satisfied with the positioning, fully tighten all securing nuts and bolts on the mount using a socket set to lock the TV into its final position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6VqE8dwlJUo</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10686-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Cva3o8x52Og/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test Fan — Ceiling Fan and Light Installation</video:title>
      <video:description>Once all fan components are securely assembled and wired, return to your circuit breaker or fuse box and turn the electrical power back on. Test the fan&apos;s operation using the pull chains or remote control, if applicable. If your fan has a DC motor, it may go through a self-calibration process for about five minutes, making small back-and-forth movements before operating normally. Allow this process to complete before assessing its full functionality. Verify both the fan speeds and light operation (if installed).</video:description>
      <video:player_loc>https://www.youtube.com/embed/Cva3o8x52Og</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10686-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1adpy6YicQ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test Functionality — Ceiling Fan and Light Installation</video:title>
      <video:description>After all assembly and wiring are complete, return to the circuit breaker and switch the power back to the &apos;ON&apos; position. Test the ceiling fan and light functionality using the wall switch, pull chains, or remote control. Verify that the fan operates at all speeds and that the light turns on and off properly. Listen for any unusual noises or wobbling from the fan. If issues arise, turn off the power immediately and re-examine the connections and assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1adpy6YicQ0</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10686-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_T70puyw3B4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test — Ceiling Fan and Light Installation</video:title>
      <video:description>With the new ceiling fan fully installed, including any light kits and fan blades, return to your electrical panel. Flip the circuit breaker that you previously turned off back to the &apos;on&apos; position to restore power to the fan. Test the fan and its light (if applicable) using the wall switches and pull chains to ensure all functions are operating correctly. Now you can sit back, relax, and enjoy your new ceiling fan.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_T70puyw3B4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10679-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DlTI1eypy90/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Power at the Breaker — Ceiling Fan and Light Installation</video:title>
      <video:description>Before beginning any work, locate the circuit breaker panel. Identify the breaker that controls the light fixture you will be replacing and switch it to the &apos;OFF&apos; position. This is a critical safety step to prevent electrical shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DlTI1eypy90</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10679-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LS19gHkmQ0E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ensure Power is Off at Breaker — Ceiling Fan and Light Installation</video:title>
      <video:description>Before starting any electrical work, locate the main electrical panel (breaker box). Identify the circuit breaker that controls the power to the light fixture and wall switch you will be working on. In this case, it is labeled &apos;22B&apos;. Flip the breaker to the &apos;off&apos; position to cut power to the circuit. Return to the room and test the light switch to ensure the power is indeed off. This is a critical safety step to prevent electrical shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LS19gHkmQ0E</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10679-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pE8f6Hj8s6o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power at the Breaker Box — Ceiling Fan and Light Installation</video:title>
      <video:description>Locate the circuit breaker panel, typically in the garage or a utility closet. Identify the breaker labeled for the area where you are working (e.g., &apos;Kitchen Ceiling&apos;). Flip the designated breaker to the &apos;off&apos; position to cut power to the fixture. It is crucial to switch off the breaker, not just a light switch, as a light switch might be wired incorrectly and not fully de-energize the circuit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pE8f6Hj8s6o</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10680-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/poCHyaJ_0-Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ensure Safety and Remove Old Fixture — Ceiling Fan and Light Installation</video:title>
      <video:description>Before starting any electrical work, prioritize safety. Go to your home&apos;s electrical panel and locate the circuit breaker that controls the light fixture you intend to replace. Flip the breaker to the &apos;OFF&apos; position to cut power to the fixture. Once power is confirmed off, retrieve a stepladder to safely reach the ceiling fixture. Remove any decorative glass covers or light bulbs from the existing fixture. Then, carefully loosen and remove the small brass nuts that secure the light fixture to the ceiling, allowing it to drop slightly. Disconnect the black (hot) wire, white (neutral) wire, and the ground wire from the ceiling&apos;s electrical box by unscrewing any wire nuts and loosening the ground screw. Set the old light fixture aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/poCHyaJ_0-Q</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10680-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xk2GeVZK7wg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Fixture &amp; Expose Wiring — Ceiling Fan and Light Installation</video:title>
      <video:description>Remove the existing light cover and any light bulbs from the old fixture. Most ceiling lights are held in place by a few screws. Loosen these screws, then carefully lower the fixture to expose the electrical wiring. Before proceeding, test the wires again with a live wire tester to confirm there is still no power present. To aid in connecting the new fixture, take a quick picture of the current wiring configuration. Finally, unscrew the wire nuts and separate the old fixture&apos;s wires from the ceiling wires. If there&apos;s a ground wire attached to the mounting bracket, unscrew that as well.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xk2GeVZK7wg</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10680-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ounIQhQ0CVo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Existing Light Fixture — Ceiling Fan and Light Installation</video:title>
      <video:description>Stand on your step stool or ladder to reach the existing light fixture. Most flush-mount light fixtures can be removed by twisting the centerpiece with your hand. Once the cover is off, carefully remove any light bulbs. Unscrew the mounting plate that secures the fixture to the ceiling. Before disconnecting any wires, use a circuit tester to double-check that there is no electricity flowing through the bare wires. If safe, loosen the wire nuts connecting the ceiling wires to the light fixture&apos;s wires and carefully disconnect them. Remove the old light fixture completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ounIQhQ0CVo</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10681-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H-6Bx7mDbc4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Mounting Bracket — Ceiling Fan and Light Installation</video:title>
      <video:description>Unbox your new Hunter ceiling fan and lay out all the components, familiarizing yourself with them. Locate the new fan mounting bracket. Attach this new bracket to the electrical box in the ceiling using the provided screws. Ensure it is securely fastened, often using the same screw holes as the old bracket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H-6Bx7mDbc4</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10681-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LS19gHkmQ0E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Fan Mounting Bracket — Ceiling Fan and Light Installation</video:title>
      <video:description>Replace the old mounting bracket with the new one provided with the ceiling fan. Use the existing screws from the ceiling electrical box to secure the new black mounting bracket flush against the ceiling. This new bracket has cushioning to help reduce fan vibration. Additionally, if the ceiling box is fan-rated and secured to a ceiling joist, install extra screws (often provided with the fan) directly into the ceiling joist through available holes in the mounting bracket. This provides maximum stability and safety, preventing the fan from falling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LS19gHkmQ0E</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10681-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mTor7ALu0Cg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Mounting Bracket — Ceiling Fan and Light Installation</video:title>
      <video:description>With the old fan removed, install the new mounting bracket. Take the new mounting bracket (often included with the new fan) and reuse the main mounting screws from the old fan&apos;s installation. Partially screw these old screws back into the ceiling electrical box, leaving enough space for the new bracket to slide into place from the side. Once the bracket is in position, tighten the screws securely until the mounting bracket is firm and does not wobble. This bracket will support the entire new fan assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mTor7ALu0Cg</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10682-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LS19gHkmQ0E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire the Ceiling Fan to House Wiring — Ceiling Fan and Light Installation</video:title>
      <video:description>Hang the assembled ceiling fan temporarily from the new mounting bracket using the provided hanger bracket/wire. This frees your hands to make the electrical connections. Connect the ground wires first (typically bare copper or green wires), twisting them together and securing them with a wire nut. Next, connect the neutral wires (white wires) from the fan to the house wiring, twisting them together and securing them with a wire nut. Finally, connect the hot wires (black wires) from the fan to the house wiring, twisting them and securing with a wire nut. For added safety and to prevent future loose connections due to house settling, wrap each wire nut connection tightly with electrical tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LS19gHkmQ0E</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10682-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U6X-EyNFitw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Electrical Wiring — Ceiling Fan and Light Installation</video:title>
      <video:description>With the mounting bracket installed and the power confirmed off, proceed to connect the fan&apos;s electrical wires to the ceiling&apos;s wiring. The presenter first connects the neutral wires: the white wire from the fan to the white (or neutral-colored) wire from the ceiling using a wire nut. Next, connect the live wires: the black wire from the fan to the black (or line voltage/load) wire from the ceiling, again using a wire nut. The fan also has a ground wire, which the presenter connects to a green screw on the mounting plate. He notes that he &quot;probably should have done that before I grabbed the fan&quot; but proceeds to do it while holding the fan.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U6X-EyNFitw</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10682-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mTor7ALu0Cg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Wiring and Mount Fan — Ceiling Fan and Light Installation</video:title>
      <video:description>Now it&apos;s time to connect the wiring and mount the fan to the ceiling. First, slide the programmed receiver unit into the designated gap in the middle of the ceiling mounting bracket. Plug the receiver&apos;s corresponding wire connector into the matching connector coming from the downrod. Next, use wire connectors to connect the fan&apos;s wires to the house wiring in the ceiling. Typically, you will connect all like-colored wires: the two black wires together (hot), the two white wires together (neutral), and the two green or bare copper wires together (ground). If there&apos;s an extra red or other colored wire coming from the ceiling that isn&apos;t needed for your new fan (e.g., if your new fan&apos;s light is controlled by the remote and doesn&apos;t need a separate light switch wire), cap it off safely. Carefully push all the connected wires up into the electrical box. Then, lift the entire fan assembly and hook the hanger ball into the mounting bracket. Rotate the fan assembly until the notch on the mounting bracket lines up and clicks securely into the groove on the hanger ball. Finally, raise the main canopy piece up against the ceiling and screw it into place to cover all the wiring and the mounting bracket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mTor7ALu0Cg</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10683-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/n7LzIuhnY1c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang Fan Motor Assembly — Ceiling Fan and Light Installation</video:title>
      <video:description>Carefully lift the fan&apos;s motor assembly. Insert its hanging ball into the socket of the ceiling hanging bracket by orienting it sideways, then rotate it to allow it to drop into place and hang securely. This frees your hands to perform the wiring connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/n7LzIuhnY1c</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10683-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xnn-Zy1lnQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Fan Motor Assembly — Ceiling Fan and Light Installation</video:title>
      <video:description>Mount the fan motor assembly onto the installed mounting bracket. The motor assembly has a bracket with a small slit designed to fit onto the hook of the ceiling mounting bracket. Carefully lift the fan motor assembly and slide the slit onto the hook. This will temporarily support the fan, allowing you to easily connect the electrical wiring. Once hung, swivel the fan motor assembly into its final position and tighten the four screws to secure it firmly to the ceiling fan bracket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xnn-Zy1lnQY</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10683-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yxsV13OjYkc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Fan to Bracket — Ceiling Fan and Light Installation</video:title>
      <video:description>Once all electrical connections are made and the remote receiver is tucked away, lift the fan motor assembly and align it with the mounting bracket. Push the fan up and into place, ensuring it sits securely in the bracket. Tighten any remaining screws (usually two or more) on the side of the fan canopy to firmly secure the fan to the mounting bracket. Refer to your fan&apos;s instruction manual for specific attachment methods.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yxsV13OjYkc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10684-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LS19gHkmQ0E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Blades, LED Light, and Receiver to Fan Motor — Ceiling Fan and Light Installation</video:title>
      <video:description>Once the blades are attached to their brackets, secure these assemblies to the main fan motor housing. Use the provided screws and a hand screwdriver, being mindful of painted threads in the motor housing that could strip easily. Carefully attach each blade assembly to the motor, ensuring they are firm and properly aligned. After all blade assemblies are attached, install the LED light fixture onto the bottom of the fan motor, ensuring its small connecting cable is properly aligned before tightening. Then, screw the LED light in place. Next, flip the fan assembly over. Attach the small canopy piece to the top of the fan motor. Finally, connect the remote control receiver&apos;s wires to the fan&apos;s internal wiring, ensuring the power supply wires are exposed for later connection to the ceiling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LS19gHkmQ0E</video:player_loc>
      <video:duration>137</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10684-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DlTI1eypy90/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Fan Blades and Light Kit — Ceiling Fan and Light Installation</video:title>
      <video:description>Following your fan&apos;s manufacturer instructions, attach each fan blade to the motor. This usually involves holding the blade in place while screwing it into the fan motor assembly. Once the blades are secure, attach the light cage or light kit housing to the fan motor. Install the light bulbs into their sockets. Finally, attach the decorative glass cover to the light cage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DlTI1eypy90</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10684-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dBNZ6XN4OWM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Fan Blades and Light Kit — Ceiling Fan and Light Installation</video:title>
      <video:description>Working on a flat surface, such as a bed, attach the three fan blades to the DC motor assembly. The blades are designed to align perfectly and rest snugly against the motor housing. Use the pre-installed screws on the motor to secure each blade in place. Next, take the LED light plate and feed the wire cable from the bottom of the fan motor through its center. Plug the cable into the light plate and secure the light plate to the motor assembly with screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dBNZ6XN4OWM</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10685-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HLrWLsCGwGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Light Globes and Bulbs — Ceiling Fan and Light Installation</video:title>
      <video:description>Now, install the light globes and light bulbs. To install a globe, first loosen all the screws around the light socket where the globe will attach. Once loosened, slide the globe into place. Then, tighten each screw a little bit at a time, working your way around the globe, until it is snug. This ensures the globe is evenly secured and won&apos;t rattle when the fan is in motion. After the globes are installed, screw the light bulbs into their respective sockets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HLrWLsCGwGk</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10685-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BASrkcmH8YE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach light bulbs — Ceiling Fan and Light Installation</video:title>
      <video:description>Screw the light bulbs into their sockets in the newly installed light fixture assembly. The fan shown uses small, candelabra-style bulbs. Once all bulbs are in place, the light cover can be installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BASrkcmH8YE</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10685-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BIRsml7nmoA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Light Kit and Glass Shade — Ceiling Fan and Light Installation</video:title>
      <video:description>The final step is to install the light kit and glass shade. Locate the thumb screws on the light kit assembly beneath the fan motor. Loosen these screws enough to allow the glass shade to be inserted. Carefully place the glass shade over the light bulb and into position. Once seated, gently tighten the thumb screws to secure the shade without overtightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BIRsml7nmoA</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10678-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — measure stairs for tread installation</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10678-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — measure stairs for tread installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10678-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — measure stairs for tread installation</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10677-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — measure stairs for tread installation</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10677-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — measure stairs for tread installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10677-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — measure stairs for tread installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10669-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I9JjIkcrbOU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Charger Compatibility — Car Battery Charging</video:title>
      <video:description>The video introduces the Newport Vessels 12V Smart Battery Charger. Before use, it&apos;s crucial to understand its compatibility: this charger is specifically designed for 12V lead-acid batteries (including AGM, GEL, Flooded, and Maintenance-Free types) and is *not compatible with lithium batteries*. Always verify your battery type before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I9JjIkcrbOU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10670-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/auhfI1zWBco/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Positive Battery Cable — Car Battery Charging</video:title>
      <video:description>Next, locate the positive battery terminal (often covered by a red cap and marked with a plus sign). Use a wrench to loosen the nut on the positive terminal clamp. Carefully slip the cable off the terminal once loose. Move this cable aside, ensuring it also does not contact any metal components or the disconnected negative cable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/auhfI1zWBco</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10670-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K-_kT8LTtDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Negative Battery Terminal — Car Battery Charging</video:title>
      <video:description>First, carefully remove the red positive terminal cover. Using a 10mm socket and ratchet, loosen the nut on the negative (-) battery terminal (usually on the right side). Once loosened, wiggle the terminal off the battery post and move it away from the battery to prevent accidental contact. It&apos;s crucial to disconnect the negative terminal first to avoid short circuits or sparks if your tool accidentally touches a metal part of the car body.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K-_kT8LTtDg</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10670-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WdX8dmLNwOs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Battery Terminals — Car Battery Charging</video:title>
      <video:description>Begin by safely disconnecting the battery terminals. Use a 10mm socket or wrench to loosen the nut on the negative terminal first. Once loose, carefully remove the terminal from the battery post and move it away to prevent accidental contact with other metal components. Repeat the process for the positive terminal. Be aware that disconnecting the battery will reset some vehicle settings like radio stations and the clock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WdX8dmLNwOs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10671-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kEFXp-glypM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Battery Charger — Car Battery Charging</video:title>
      <video:description>With the battery properly prepared, connect the battery charger. First, attach the red positive (+) clamp from the charger to the positive (+) terminal of the battery. Next, attach the black negative (-) clamp from the charger to the negative (-) terminal of the battery. Ensure both clamps are securely fastened. Once the clamps are connected, plug the battery charger into a wall outlet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kEFXp-glypM</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10671-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oKtn17sc9vo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Charger Leads to Battery Terminals — Car Battery Charging</video:title>
      <video:description>Attach the charger&apos;s leads to the battery terminals. Connect the red (positive) clamp to the red (positive) terminal of the battery. Then, connect the black (negative) clamp to the black (negative) terminal of the battery. If your smart charger comes with a permanent ring terminal hookup for winter storage, these would already be attached. Ensure any protective covers over the terminals are removed before attaching the clamps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oKtn17sc9vo</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10671-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I9JjIkcrbOU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Charger to Battery with Correct Polarity — Car Battery Charging</video:title>
      <video:description>Before plugging the charger into a power outlet, securely connect the charger&apos;s alligator clips to your 12V lead-acid battery. Ensure the red (positive) alligator clip is connected to the positive (+) terminal of the battery and the black (negative) alligator clip is connected to the negative (-) terminal. The charger is equipped with reverse polarity protection, which will display an error (&apos;EFF&apos;) if connected incorrectly, preventing damage to the charger or battery.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I9JjIkcrbOU</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10672-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kEFXp-glypM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Configure Charger Settings — Car Battery Charging</video:title>
      <video:description>Locate the settings on your battery charger. Set the &apos;Battery Type&apos; switch to &apos;Deep Cycle &amp; AGM&apos; to ensure the correct charging profile for your deep cycle battery. Then, select the &apos;Charge Rate&apos; or &apos;Charge Amperage&apos; setting. The video recommends a &apos;10 A Automatic&apos; setting for a fast charge. It&apos;s generally advised to keep the charger as far away from the battery as possible during charging, primarily as a safety precaution, to avoid any potential hazards like sparks or fumes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kEFXp-glypM</video:player_loc>
      <video:duration>126</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10672-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WNQWaJsbqCg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Charger Controls — Car Battery Charging</video:title>
      <video:description>Familiarize yourself with the controls on the battery charger. On the left side of the unit, there is a dial that allows you to select both the voltage (6V or 12V) and the amperage setting for charging. Options typically include a slow charge (e.g., 2 amps), a medium charge (e.g., 10 amps), and a faster charge (e.g., 40 amps). The lower amperage settings are suitable for slow, long charging cycles, while higher amperages provide faster charging. The 6-volt setting is for smaller batteries, such as those found in tractors or trailers. On the right side, there&apos;s a start switch, which functions as a timer. You rotate this dial to set the desired charging duration, and it will automatically return to the &apos;off&apos; position once the time has elapsed. There is also a hold position for continuous charging or boosting. The charger also features a standard 110-volt plug at the back for connecting to a wall outlet and positive (red) and negative (black) leads with clamps for connecting to the battery terminals.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WNQWaJsbqCg</video:player_loc>
      <video:duration>103</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10672-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AAyNzphQRQk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Charger to Battery and Adjust Settings — Car Battery Charging</video:title>
      <video:description>After preparing the charger, connect its wires to the battery terminals. Always connect the positive (+) wire to the positive terminal and the negative (-) wire to the negative terminal. Then, plug the charger into an AC outlet. For the Victron Energy Blue Smart IP22 charger, you will need to select the appropriate battery type setting. Access the &apos;Mode&apos; dial on the charger itself or use the VictronConnect smartphone app. Navigate from &apos;Normal&apos; or other battery types to &apos;LI-ION&apos; (or &apos;LiFePO4&apos;) mode. This ensures the charger uses the correct voltage and charging profile for lithium batteries. You can also adjust the charging current via the app (e.g., from 30A to 15A) to reduce heat, which can extend the charger&apos;s lifespan. The app provides real-time charging status, voltage, and current information. The charger will then begin its six-stage charging process, including test, bulk, absorption, float, and storage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AAyNzphQRQk</video:player_loc>
      <video:duration>168</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10673-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WNQWaJsbqCg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plug In Charger and Start Charging — Car Battery Charging</video:title>
      <video:description>After the battery leads are securely connected to the battery terminals, plug the charger&apos;s 110-volt power cord into a standard wall outlet. Once plugged in, turn the charger&apos;s timer dial to the desired charging time (e.g., 45 minutes as shown). The ammeter on the charger will indicate that a charge is being sent to the battery. Monitor the ammeter, as the charging current may fluctuate and will typically decrease as the battery charges. Ensure the charging process begins as expected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WNQWaJsbqCg</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10673-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kEFXp-glypM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Battery Charger — Car Battery Charging</video:title>
      <video:description>With the battery properly prepared, connect the battery charger. First, attach the red positive (+) clamp from the charger to the positive (+) terminal of the battery. Next, attach the black negative (-) clamp from the charger to the negative (-) terminal of the battery. Ensure both clamps are securely fastened. Once the clamps are connected, plug the battery charger into a wall outlet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kEFXp-glypM</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10673-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oKtn17sc9vo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect and Monitor Charger — Car Battery Charging</video:title>
      <video:description>Once the leads are securely attached, reconnect the charger. This can be done by plugging the charger back into a 120VAC wall outlet or by connecting the quick-connect mechanism on the charger cable, depending on your setup. The smart charger will then begin its charging process. Observe the indicator light on the charger to confirm it is actively charging. For the specific Centech charger shown, a solid red light indicates &apos;Charging,&apos; while a green light indicates &apos;Maintaining&apos;. Most lawn mower batteries are 12 volts, so ensure your charger matches this voltage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oKtn17sc9vo</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10674-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LB_9AZbpZn4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Confirm Full Charge — Car Battery Charging</video:title>
      <video:description>Once the battery&apos;s display reaches 100% state of charge, confirm that the Electric Energy Meter shows approximately 0 A and 0 W, indicating that charging has ceased. The NOEIFEFEVO charger itself has a &apos;FULL/CHARGING&apos; LED indicator; verify that this light has switched from red (charging) to green (full). The meter will also display the total Amp-hours charged (e.g., 53.945 Ah), providing a record of the energy replenished. The timer will display the total time taken to charge the battery from its initial state to 100% (e.g., 2 hours 40 minutes for 50% charge).</video:description>
      <video:player_loc>https://www.youtube.com/embed/LB_9AZbpZn4</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10674-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q4mMc8V7iV0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test System Performance (Charge) — Car Battery Charging</video:title>
      <video:description>To test the charging capability, connect an external battery charger to the battery pack. The charger shown has a handle, indicating it&apos;s a portable unit. Connect the charger&apos;s output connector to the designated charging port on the battery pack. Observe the BMS display for the &apos;Current&apos; reading, which should now show a positive value (e.g., 19.95A for charging). The charger&apos;s LED indicator will typically show red for &apos;CHARGING&apos; and switch to green for &apos;FULL CHARGING&apos; when the battery is fully charged or nearing completion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q4mMc8V7iV0</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10674-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PLH8xiwadbM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Charge, Seal, and Final Test — Car Battery Charging</video:title>
      <video:description>Once the charger is connected and plugged in, observe the charger&apos;s display. It should indicate the battery&apos;s current voltage and typically switch to a &apos;Repair&apos; or &apos;Charge&apos; mode. Allow the charger to complete its cycle, which can take several hours depending on the battery&apos;s condition and charger&apos;s capacity. While charging, cut small pieces of styrofoam to fit between the battery plates and the top cover. Apply superglue to these styrofoam pieces and carefully insert them into the battery cells. This helps to secure the internal components and prevent electrolyte splashing. Once the charging is complete, disconnect the charger from the outlet first, then remove the clamps from the battery terminals. Finally, apply a corrosion-preventing coating (like petroleum jelly or dielectric grease) to the cleaned battery terminals. Place the original top cover back onto the battery and gently tap it with a wooden mallet to reseal. Perform a final voltage check with the multimeter (should be around 12.5V-12.8V). Connect a light bulb to the battery terminals with jumper cables; it should now light up brightly, confirming the battery&apos;s successful repair and charge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PLH8xiwadbM</video:player_loc>
      <video:duration>145</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10675-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WNQWaJsbqCg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Charger and Leads — Car Battery Charging</video:title>
      <video:description>Once the charging cycle is complete or you need to disconnect, always follow a specific order to ensure safety. First, turn the battery charger&apos;s power switch (timer dial) to the &apos;off&apos; position. This stops the flow of electricity. Next, unplug the charger&apos;s 110-volt power cord from the wall outlet, completely isolating the charger from the power source. Finally, disconnect the battery leads from the battery terminals, reversing the connection order: remove the negative (black) lead first, then the positive (red) lead. This minimizes any potential for arcing or sparks, which is crucial as batteries can off-gas flammable hydrogen during charging. After disconnection, neatly wrap up the leads and store the charger in its designated place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WNQWaJsbqCg</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10675-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kEFXp-glypM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Charger — Car Battery Charging</video:title>
      <video:description>Once the battery is fully charged, disconnect the charger in the reverse order of connection to ensure safety. First, unplug the battery charger from the wall outlet. This removes power from the clamps, preventing accidental shorts. Then, remove the black negative (-) clamp from the battery terminal, followed by the red positive (+) clamp from its terminal. This sequence minimizes the risk of sparks or electrical hazards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kEFXp-glypM</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10676-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/w4oLd6gLrP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Battery Terminals — Car Battery Charging</video:title>
      <video:description>First, take the positive (+) terminal wire and place it back onto the positive battery post. Ensure it slides down completely onto the post (seen at 4:10.000). Use your 10mm tool to tighten the terminal clamp nut firmly (seen at 4:17.000) so that the connection is secure and the wire cannot be easily pulled off. Replace the red plastic protective cap over the positive terminal (seen at 4:24.000). Next, take the negative (-) terminal wire and place it onto the negative battery post. You might see some small sparks when connecting the negative terminal; this is normal (seen at 4:35.000). Push the wire down onto the post and then tighten the terminal clamp nut with your 10mm tool until it is secure (seen at 4:50.000).</video:description>
      <video:player_loc>https://www.youtube.com/embed/w4oLd6gLrP8</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10676-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KtrmHkJmZ88/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect Positive Terminal First — Car Battery Charging</video:title>
      <video:description>Slide the positive (+) battery cable clamp onto the positive battery post. Ensure it is fully seated and makes good contact. Using a 10mm wrench, tighten the nut on the clamp until it is very snug. A loose connection can cause electrical issues and prevent the car from starting reliably.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KtrmHkJmZ88</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10676-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0JE-VbmzQzo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Battery Cables and Test — Car Battery Charging</video:title>
      <video:description>Now, it&apos;s time to reattach the battery cables. Reverse the order of detachment: first, attach the positive (red) cable to the positive (+) terminal of the new battery and tighten the nut securely with a socket wrench. Then, attach the negative (black) cable to the negative (-) terminal and tighten its nut. Double-check that both battery and cables are firmly attached and secure, with no wiggling. Close the car hood and attempt to start the engine to test your connections and ensure everything is working correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0JE-VbmzQzo</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10662-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IFjpGPZ-ZJw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Empty the Closet — Closet Organization</video:title>
      <video:description>Begin by completely emptying the closet. Remove all existing clothing, shoes, bags, and any other items stored inside. This step creates a blank canvas for the upcoming renovation and allows for a thorough assessment of the space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IFjpGPZ-ZJw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10662-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zZqTH6lRb04/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Out Closet — Closet Organization</video:title>
      <video:description>The video begins by showing a very cluttered closet filled with various items, including toys, bags, picture frames, and a blue storage bin. The first action is to systematically remove all contents from the closet, leaving it empty. This involves pulling out large items like picture frames and the blue storage bin, along with smaller items, to create a completely empty space to work with for the organizational overhaul.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zZqTH6lRb04</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10662-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bFLbF8o2NSE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Empty the Closet — Closet Organization</video:title>
      <video:description>The first step in refreshing the closet is to completely empty all its contents. This involves carefully removing all stacked shoe boxes from shelves, taking down all clothes from hanging rods, and clearing the floor of any shoes, bags, or accessories. This ensures a clean slate for the subsequent cleaning and reorganization phases. The video shows two individuals collaborating to efficiently remove items from both sides of the closet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bFLbF8o2NSE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10663-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bFLbF8o2NSE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Closet — Closet Organization</video:title>
      <video:description>With the closet emptied, the next crucial step is thorough cleaning. Begin by vacuuming the floor and along the baseboards to remove dust, dirt, and debris, using a crevice tool attachment for tight corners and edges. Next, use a dry duster, like a Swiffer Duster, to wipe down all shelves, including the top shelf, removing any settled dust. Follow up with disinfecting wipes, such as Clorox Wipes, to sanitize and clean the surfaces of all shelves. Finally, use a wet mop system, like a Swiffer WetJet, to clean the entire floor surface, ensuring it&apos;s free of grime and dirt.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bFLbF8o2NSE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10663-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rM12JlgABxE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Empty Closet Space — Closet Organization</video:title>
      <video:description>Once the closet is empty, a vacuum cleaner (specifically a Miele canister vacuum with a floor attachment and a crevice tool) is used to thoroughly clean the floor and baseboards. This step ensures that the area where the new shelving will be placed is free of dust, dirt, and debris, providing a clean foundation for the installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rM12JlgABxE</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10663-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bqUwmEFevJg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Empty Cabinet — Closet Organization</video:title>
      <video:description>Once the cabinet is completely empty, it&apos;s an ideal time to clean the interior. Use a damp cloth to wipe down all shelves and the inside surfaces of the cabinet. This removes any crumbs, dust, or spills that may have accumulated, providing a fresh and clean space for the newly organized items. For stubborn spots, a mild all-purpose cleaner can be used.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bqUwmEFevJg</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10664-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8ESj3yqzrAU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove All Clothes — Closet Organization</video:title>
      <video:description>Once categories are identified or you&apos;re ready to start, remove all clothing items from your closet, drawers, and any other storage areas. Gather all these clothes into one central pile, typically on a bed or a clear floor space. This &apos;reset&apos; allows you to see everything you own and start with a fresh perspective.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8ESj3yqzrAU</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10664-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Go7oxkB08zs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Decluttering and Sorting of Unwanted Items — Closet Organization</video:title>
      <video:description>After organizing, gather all items that are no longer needed, including trash, items for donation, and potentially items for selling. Create separate piles for each category. The video shows a pile of clothes designated for donation, including shoes and a handbag, and a separate pile of trash from empty boxes and packaging. This final step clears out the unwanted items, completing the decluttering process and making space for the newly organized closet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Go7oxkB08zs</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10664-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vgbCThkQraU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Declutter and Sort Items by Category — Closet Organization</video:title>
      <video:description>Systematically pull items from their original locations and sort them into the designated bins. Group similar items together; for example, all Christmas decorations go into one bin, all electronics into another, and all books into a third. The goal is to categorize everything into &apos;like items.&apos; As you sort, make immediate decisions about whether an item should be kept, purged (thrown away), or donated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vgbCThkQraU</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10665-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zu8MXfXoWxM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Space and Plan Layout — Closet Organization</video:title>
      <video:description>With the closet completely empty, take precise measurements of its dimensions, including width, height, and depth. Based on the volume and types of items you decided to keep during decluttering, plan the optimal layout for your storage solutions. This may involve sketching different configurations to integrate new elements like built-in or adjustable shelving, additional hanging rods, and dedicated wall-mounted shoe organizers. The goal is to maximize vertical space and create designated homes for all items.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zu8MXfXoWxM</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10665-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s9dEdHgCP-Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Integrate Shelving and Drawers for Full Optimization — Closet Organization</video:title>
      <video:description>After optimizing hanging space and addressing door types, focus on incorporating shelving and drawers. Shelving is ideal for folded clothes, shoes, bags, and hats. Ensure shelves are adjustable to accommodate varying item heights. Drawers are excellent for smaller items, undergarments, or delicate clothing, providing a clean and organized look. Consider pull-out baskets for items like socks or laundry. By combining double hanging, single long hanging sections, adjustable shelving, and drawers, you can significantly increase the total linear feet of usable storage, often tripling the original capacity of a standard closet. Maximize the full height of the closet by extending shelving all the way to the ceiling for seasonal or less-frequently used items.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s9dEdHgCP-Y</video:player_loc>
      <video:duration>337</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10665-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s9dEdHgCP-Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inventory Your Items and Define Needs — Closet Organization</video:title>
      <video:description>Before planning any physical changes, conduct a thorough inventory of all items you intend to store in the closet. Categorize your clothing by type (e.g., shirts, pants, dresses, coats, accessories) and consider their typical hanging lengths. For example, men&apos;s shirts or folded pants might require 42 inches of hanging length, while longer dresses or coats might need 60 inches or more. This inventory will dictate the types of hanging space (double vs. single), shelving, and drawer units you will need to incorporate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s9dEdHgCP-Y</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10666-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s9dEdHgCP-Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Integrate Shelving and Drawers for Full Optimization — Closet Organization</video:title>
      <video:description>After optimizing hanging space and addressing door types, focus on incorporating shelving and drawers. Shelving is ideal for folded clothes, shoes, bags, and hats. Ensure shelves are adjustable to accommodate varying item heights. Drawers are excellent for smaller items, undergarments, or delicate clothing, providing a clean and organized look. Consider pull-out baskets for items like socks or laundry. By combining double hanging, single long hanging sections, adjustable shelving, and drawers, you can significantly increase the total linear feet of usable storage, often tripling the original capacity of a standard closet. Maximize the full height of the closet by extending shelving all the way to the ceiling for seasonal or less-frequently used items.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s9dEdHgCP-Y</video:player_loc>
      <video:duration>337</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10666-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zZqTH6lRb04/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Shelving Units — Closet Organization</video:title>
      <video:description>After clearing the closet, the next step involves installing shelving units. Two cubby-style shelving units, made of a light wood-grain material, are carefully brought into the closet and placed side-by-side on the floor, against the back wall. These units appear to be pre-assembled, requiring only precise positioning within the closet space to form the foundation of the new storage system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zZqTH6lRb04</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10666-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zu8MXfXoWxM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Vertical Shelving Units — Closet Organization</video:title>
      <video:description>Install either pre-fabricated shelving units or custom-built shelves to maximize vertical storage space within the closet. The video prominently displays neatly stacked folded clothes on wooden shelves, suggesting a robust shelving system. Begin by locating wall studs using a stud finder for secure mounting. Use a level to ensure shelves are perfectly horizontal before securing them with appropriate mounting hardware, such as brackets and screws. Space shelves according to the height of your folded items, making sure to utilize the full height of the closet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zu8MXfXoWxM</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10667-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U6FMSsUkT94/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restock and Organize Clothes — Closet Organization</video:title>
      <video:description>With the stackable organizers securely in place, the final step involves returning the clothing items to the shelf, but this time with a systematic approach. Various folded clothes, such as jeans, sweaters, and shirts, are neatly arranged into the individual compartments created by the clear bins. Attention is paid to consistent folding methods to ensure a tidy appearance and efficient use of space within each organizer. This organized arrangement makes it easier to find and access specific clothing items.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U6FMSsUkT94</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10667-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bFLbF8o2NSE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Organize Clothes and Accessories — Closet Organization</video:title>
      <video:description>The final step is to reorganize all remaining clothes and accessories back into the freshly cleaned and prepped closet. Begin by hanging clothes on the main hanging rods, ensuring they are neatly spaced and grouped logically, perhaps by item type (e.g., shirts, pants, jackets) or color. For folded items like sweaters, t-shirts, or casual wear, stack them neatly on the open shelves, possibly utilizing clear acrylic organizers for better separation and visibility. Utilize the remaining shelf space for hats, bags, and other accessories, arranging them aesthetically and functionally. The video shows a variety of items, including hats, small bags, perfume bottles, and decorative boxes, being placed on the shelves to complete the organized look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bFLbF8o2NSE</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10667-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zu8MXfXoWxM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Organize and Accessorize — Closet Organization</video:title>
      <video:description>Once all your new storage solutions are installed, it&apos;s time to bring your decluttered and sorted items back into the closet. Methodically place each item in its designated spot, making sure to fold clothes neatly (like the clean stacks shown in the video) and utilize drawer dividers, bins, or baskets to keep smaller items like socks, underwear, or accessories contained and tidy. This final step brings all the previous efforts together, resulting in a highly organized and functional small closet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zu8MXfXoWxM</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10668-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aMtNR-2thcU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Implement Labeling System — Closet Organization</video:title>
      <video:description>Use a label maker to create clear, concise labels for each bin and for the shelves where the bins are placed. Labeling helps reinforce the zones, reduces cognitive load, and ensures all household members can easily find and return items. Consider double-labeling (labeling the bin and the shelf) for maximum clarity. The video shows using a Brother P-touch D610BT label maker to print labels like &quot;canned foods,&quot; &quot;pasta and grains,&quot; &quot;chips,&quot; &quot;overstock snacks,&quot; and &quot;dinner foods,&quot; and then applying these labels to shelves and bins.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aMtNR-2thcU</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10668-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VIhcSM1cdug/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sort and Place into Labeled Bins — Closet Organization</video:title>
      <video:description>This step is where the bulk of the organization happens. From the &quot;after&quot; shot, it&apos;s evident that all items are meticulously sorted and placed into clear plastic storage bins of various sizes. The use of clear bins is crucial as it allows for easy visual identification of contents without needing to open each one. Similar items are grouped together to create logical categories (e.g., &quot;Halloween&quot; decorations, as seen labeled on several bins). Once items are neatly placed in their respective containers, each bin is labeled with a clear, concise, and consistent label (e.g., printed white labels) that specifies its contents. This systematic approach ensures everything has a designated home and is easily retrievable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VIhcSM1cdug</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10668-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JwBpitQbAU0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Organize and Label Items on Shelves — Closet Organization</video:title>
      <video:description>Once the shelves are in place, begin transferring the categorized items from the floor bins onto the shelving units. Ensure that each clear plastic bin is clearly labeled with its contents using a label maker. Arrange the bins on the shelves with the labels facing outwards for ease of identification and access. The video highlights categories such as &apos;keepsakes&apos; and &apos;photos&apos;, which can often be time-consuming to sort through due to their sentimental value.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JwBpitQbAU0</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10649-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2C0AmmrVquo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect power — Garage Door Opener Repair</video:title>
      <video:description>Before beginning any work on the garage door opener, ensure electrical power is safely disconnected. This can be done by unplugging the garage door opener from its ceiling outlet or by turning off the corresponding circuit breaker in your home&apos;s electrical panel. Always wear work gloves to protect your hands during this repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2C0AmmrVquo</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10649-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qDog-nbQ1hc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — Garage Door Opener Repair</video:title>
      <video:description>The first critical step is to disconnect electrical power to the garage door opener. This can be done by either unplugging the garage door opener from the wall outlet or, if it&apos;s hardwired, by turning off the corresponding circuit breaker in your home&apos;s electrical panel. Ensure that the power is completely off before proceeding to prevent accidental startup or electrical shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qDog-nbQ1hc</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10649-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5CwYbm8PrTY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — Garage Door Opener Repair</video:title>
      <video:description>To ensure safety before beginning any work on the garage door opener, disconnect its electrical power. You can do this by either unplugging the garage door opener directly from the ceiling outlet or by turning off the corresponding house circuit breaker at your home&apos;s electrical panel. If using the circuit breaker, ensure you know which breaker controls the garage opener and test that power is off after flipping it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5CwYbm8PrTY</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10650-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TplVc-d3T-Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Remote and Wall Switch Check — Garage Door Opener Repair</video:title>
      <video:description>Start by testing your garage door remote control. If it doesn&apos;t activate the door, try using the wall-mounted switch inside your garage. If the wall switch works but the remote doesn&apos;t, the issue is likely with the remote&apos;s battery or programming. If neither works, the problem lies with the garage door opener mechanism or the door itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TplVc-d3T-Q</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10650-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YpOrUFEHyI8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Garage Door Malfunction — Garage Door Opener Repair</video:title>
      <video:description>Begin by observing the garage door&apos;s behavior. If it opens only an inch or two and then stops or reverses, test both the remote control and the wall-mounted opener button. Note if the behavior is consistent across both activation methods.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YpOrUFEHyI8</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10650-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IEweV844CbA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Power and Controls — Garage Door Opener Repair</video:title>
      <video:description>Begin by ensuring the garage door opener unit is securely plugged into its electrical receptacle, typically located near the motor unit on the ceiling. Loose connections can often be the culprit. Next, inspect the wall-mounted control panel. Many modern openers, such as the Craftsman model shown, feature a &apos;lock&apos; button. Confirm this button is not activated or flashing, as an engaged lock feature will prevent both the wall panel and remote controls from operating the door. Finally, check your home&apos;s main electrical panel to make sure the circuit breaker supplying power to the garage is in the &apos;on&apos; position; if it&apos;s tripped, reset it by switching it off and then back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IEweV844CbA</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10651-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tz5N1Pmgg3o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Remote Battery — Garage Door Opener Repair</video:title>
      <video:description>If, after all previous checks, your remote control still isn&apos;t working or its LED didn&apos;t blink during the initial check (Step 1), it&apos;s time to replace the battery. You can use a common visor clip, or a small flathead screwdriver, to carefully pry open the plastic casing of the remote control. Start prying from one side and gently work your way around the edges until the two halves of the casing separate. Inside, you will find a coin-style battery. This remote typically uses a CR2032 battery, which is a popular size found in many electronic devices. Remove the old battery and insert a new CR2032 battery, making sure the positive (+) side is facing up (visible). Gently squeeze the new battery into its compartment and then snap the remote control case back together.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tz5N1Pmgg3o</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10651-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9XetnVcqpCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Remote Battery — Garage Door Opener Repair</video:title>
      <video:description>To address poor remote range, start with the simplest fix: replacing the battery in your garage door opener remote. First, remove the metal clip attached to the remote. Use the clip, or a similar thin, flat object like a small screwdriver, to carefully pry open the remote&apos;s casing. Once open, locate the coin cell battery (CR2032 is a common type shown in the video) and replace it with a new one. Snap the remote casing back together and reattach the clip. Test the remote to see if the range has improved.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9XetnVcqpCw</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10651-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CoO2IMFd3Gk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Troubleshoot: Replace Weak Batteries — Garage Door Opener Repair</video:title>
      <video:description>If you&apos;re still experiencing programming difficulties, weak batteries in your remote could be the cause. Open your remote control and inspect the battery. Replace the existing battery with a new, fresh battery of the correct type (typically a coin cell battery). After replacing the batteries, try reprogramming your remotes again using the appropriate method for your specific remote and opener type.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CoO2IMFd3Gk</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10652-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JS-aGNHa-rY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program Remote Control — Garage Door Opener Repair</video:title>
      <video:description>Once the garage door opener is in learn mode, pick up the remote control you wish to program. Point it towards the opener unit and press the desired button on the remote that you want to use for opening/closing the garage door. The remote&apos;s LED indicator light will typically illuminate or flash as it transmits its unique code. The garage door opener&apos;s indicator light (from the previous step) should flash or change state, confirming that it has successfully learned the remote&apos;s code.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JS-aGNHa-rY</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10652-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TmJrfxBlQqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program the Remote — Garage Door Opener Repair</video:title>
      <video:description>Press and release the &apos;LEARN&apos; button on the garage door opener. Immediately after, press the button on your new remote once. Wait for a few seconds (approximately 2-3 seconds as indicated by the video&apos;s pacing), and then press the button on your remote again. The light on the garage door opener should blink or turn off to confirm successful programming. The remote will now be linked to your garage door opener.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TmJrfxBlQqU</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10652-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qzYtfm2IgUY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program Remote for First Door — Garage Door Opener Repair</video:title>
      <video:description>Access the wall-mounted control panel inside your garage, which typically has a &apos;learn&apos; button. Press the &apos;learn&apos; button once; it will emit a beep and its light will start blinking. Immediately press the &apos;learn&apos; button a second time. The light will now flash differently, indicating that the system is ready to learn a new remote control. While the light is flashing, press the large, main button on your LiftMaster garage door remote. The garage door opener&apos;s light (on the main unit above the door) will flash once, confirming that the remote button has been successfully programmed to operate this specific door. Test the remote to ensure it functions correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qzYtfm2IgUY</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10653-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5yjNRXGa_BI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Obstructions from Door Path and Tracks — Garage Door Opener Repair</video:title>
      <video:description>The first potential reason for a garage door&apos;s malfunction is an obstruction. Carefully inspect the garage door tracks and the entire door opening. The presenter demonstrates how an item, such as a pole, leaning into the track or positioned in the door&apos;s path, can cause a slight collision. Even a minor touch will trigger the door&apos;s safety sensors, causing it to stop and retract.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5yjNRXGa_BI</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10653-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TplVc-d3T-Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Garage Door for Physical Damage or Misalignment — Garage Door Opener Repair</video:title>
      <video:description>Visually inspect the entire garage door for any physical damage such as dents, bends, or cracks in the panels. Also, check the tracks for any obstructions, bending, or misalignment that could prevent the door from moving smoothly. Even minor damage can cause significant operational issues.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TplVc-d3T-Q</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10653-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gKPhLZ_oC78/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Garage Door Binding — Garage Door Opener Repair</video:title>
      <video:description>If all safety sensor checks prove inconclusive, the problem may be a physical issue with the garage door itself, specifically if it is binding or getting stuck during movement. To check for this, first, disconnect the garage door from the opener by pulling the red emergency release cord (usually a red handle attached to a rope hanging from the trolley). Once disengaged, try to manually open and close the garage door by hand. The door should move smoothly and easily along its tracks without excessive resistance, grinding, or sticking at any point. If the door binds, it indicates problems with the tracks, rollers, springs, or cables, which require further inspection or professional service.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gKPhLZ_oC78</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10654-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7pyrwoHuxOA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Tracks, Cables, and Rollers — Garage Door Opener Repair</video:title>
      <video:description>Next, perform a visual inspection of the garage door tracks. Ensure that they are secure and properly aligned. Check the cables that run along the tracks to make sure they are not frayed or damaged. Additionally, observe the rollers as they move along the track to confirm they run smoothly and without obstruction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7pyrwoHuxOA</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10654-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ek2rga41V5U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Cables and Drums — Garage Door Opener Repair</video:title>
      <video:description>Check the condition of the lifting cables and their connection to the drums at the ends of the torsion bar. Ensure the cables are properly seated on the drums, free of fraying, and not tangled. The video emphasizes that if these cables are not properly positioned, it would be very difficult to open the door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ek2rga41V5U</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10654-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6-Tt4V0HW5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Springs and Hardware — Garage Door Opener Repair</video:title>
      <video:description>With the garage door closed, thoroughly inspect the springs for any signs of damage, such as breaks, rust, or excessive wear. If a spring is found to be broken, do not attempt to operate the door, as this can lead to severe injury or death. Also, visually examine all hinges, brackets, and fasteners for looseness, rust, bending, or damage. If an automatic garage door opener is installed, confirm that an opener reinforcement bracket is present and securely attached to the top section of the door. The header bracket, which anchors the opener rail, must also be firmly secured to the wall or header using appropriate fasteners like lag bolts or concrete anchors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6-Tt4V0HW5w</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10655-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j7OnPl-tBuI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Test Safety Sensors — Garage Door Opener Repair</video:title>
      <video:description>Locate the garage door safety sensors mounted near the bottom of the garage door tracks, typically one on each side. These sensors project an invisible beam across the garage door opening. Check if the indicator light on each sensor is illuminated. If a light is off, it could indicate a power issue or a severe misalignment. Test the sensors by interrupting the beam (e.g., by placing a hand between them); the light on one of the sensors (often the receiver) should turn off and then back on when the obstruction is removed. The video highlights that a *flickering* light on the primary sensor (emitter) is a subtle but critical indicator of misalignment that can be easily overlooked.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j7OnPl-tBuI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10655-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QmB-Lg-T9fk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Safety Sensor Lights — Garage Door Opener Repair</video:title>
      <video:description>Proceed to the bottom of the garage door tracks to locate the safety sensors. There should be one sensor on each side of the door opening. One sensor typically emits a solid orange light, while the other emits a solid green light when they are properly aligned and communicating. The video shows that one sensor (the orange one) has a solid light, but the other sensor (the green one) is off, indicating it&apos;s misaligned or its beam is obstructed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QmB-Lg-T9fk</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10655-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7xjWWZyPfo8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Safety Sensors for Indicator Lights — Garage Door Opener Repair</video:title>
      <video:description>Locate the safety sensors, which are typically small, black boxes mounted on the garage door tracks near the floor. These sensors work in pairs, with one transmitting a beam and the other receiving it. Observe the indicator lights on both sensors. One sensor (transmitter) should display a solid red light, and the other (receiver) should display a solid green light. If any light is flashing or off, it indicates a problem, most commonly a misalignment or obstruction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7xjWWZyPfo8</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10656-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YpOrUFEHyI8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Opener Mechanism and Error Codes — Garage Door Opener Repair</video:title>
      <video:description>Activate the garage door opener using the wall button or remote. Observe the chain or belt mechanism on the opener&apos;s rail. Note if the chain moves its full cycle despite the door not opening or closing correctly. Additionally, check the main opener unit for any blinking lights or error codes. The video identifies an &apos;ON/RED/FLASHING&apos; error, which, according to the owner&apos;s manual, indicates &apos;Door component failure detected.&apos; This suggests checking the door spring, track, rollers, hinges, and fixtures.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YpOrUFEHyI8</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10656-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vyzxlEsEuH8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust Opener Chain/Belt Sag — Garage Door Opener Repair</video:title>
      <video:description>If your garage door opener&apos;s chain or belt has excessive sag, it can be adjusted. First, open the door until the carriage is about midway along the rail. Then, disengage the carriage by pulling the red release handle and manually close the door. Use two wrenches to loosen the nuts on the turnbuckle, which is part of the chain/belt assembly. Rotate the turnbuckle counterclockwise until the slack is reduced. The chain or belt should be positioned at least a quarter inch from the bottom of the rail when properly tensioned. Once the correct tension is achieved, tighten the nuts on the turnbuckle securely. Finally, manually open the door to allow the carriage to re-engage with the turnbuckle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vyzxlEsEuH8</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10657-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IEweV844CbA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Manual Door Operation and Inspect Springs — Garage Door Opener Repair</video:title>
      <video:description>If power and controls are verified, the next step is to determine if the garage door mechanism itself is binding. Locate the emergency release rope (typically a red cord hanging from the trolley mechanism on the opener track) and pull it to disengage the opener from the garage door. Once disengaged, try to manually open and close the garage door. If the door moves easily and smoothly up and down, then the problem lies with the opener motor or its settings. However, if the door feels heavy, gets stuck, or binds, this indicates a mechanical issue with the door system, possibly a broken torsion spring (the large spring running horizontally above the garage door). The video strongly advises against attempting to fix torsion springs yourself due to extreme danger and recommends contacting a professional for this specific issue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IEweV844CbA</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10657-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e4rgtvGFGwY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Trolley from Track — Garage Door Opener Repair</video:title>
      <video:description>To allow for thorough cleaning of the trolley, it must be removed. First, release the trolley from the track by pulling its cotter pin and removing the associated pin to detach it from the door connection. Next, detach the entire rail from the wall by removing the retaining nut that secures the rail to the wall bracket. Once the nut is off, slide the trolley forward off the end of the rail. You may need to move the entire rail into an upper position to gain enough clearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e4rgtvGFGwY</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10657-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LODw6n_p2Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Manually Test and Re-engage Motor — Garage Door Opener Repair</video:title>
      <video:description>To test the door&apos;s mechanical movement independently of the motor, locate the red emergency release cord on the motor unit and pull it to disengage the motor. Manually raise and lower the garage door several times to ensure it moves freely and smoothly within its tracks. This confirms that the mechanical issue is resolved. Once satisfied, re-engage the motor by pushing the lever back into its position or following the specific instructions for your motor model, and then restore power by turning the outlet/switch back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LODw6n_p2Y4</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10658-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7T4c2LGBtAo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Opener Malfunction — Garage Door Opener Repair</video:title>
      <video:description>The video begins by showcasing a Lift-Master 1/2 H.P. Security+ Professional Line garage door opener, specifically identifying it as a Chamberlain model 2000SDR. The primary symptom of malfunction is demonstrated: when the remote control is activated, the opener emits a clicking sound, and its internal light may flash, but the garage door itself does not move or open. This behavior is presented as a clear indication of an issue with the opener&apos;s internal logic or control circuit board.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7T4c2LGBtAo</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10658-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ljt0xNY-2yE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Diagnosis and Power Disconnection — Garage Door Opener Repair</video:title>
      <video:description>With the cover removed, initiate a test of the garage door opener. Press the garage door opener button to observe its behavior. If the unit produces a buzzing sound without any movement, this is a strong indication of a capacitor issue. Visually inspect the internal gears to confirm they appear to be in good condition, ruling out mechanical failure. Before proceeding with any electrical work, locate the power cord and unplug the garage door opener from the electrical outlet. This is a crucial safety measure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ljt0xNY-2yE</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10659-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IiSSWX-GlTg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Manual Door Operation and Balance — Garage Door Opener Repair</video:title>
      <video:description>Before making any adjustments to the garage door opener, first check the manual operation of the garage door itself. Pull the emergency release cord, which typically has a red handle, to disconnect the garage door from the opener&apos;s track. Once disconnected, manually move the garage door up and down. Observe if it moves smoothly without excessive resistance or sticking. Also, test the door&apos;s balance by stopping it midway through its travel; a properly balanced door should remain in place without falling or rising on its own. If the door moves smoothly and stays put when manually operated, the issue likely lies with the opener, not the door&apos;s mechanical components or springs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IiSSWX-GlTg</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10659-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5yjNRXGa_BI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Door Balance and Torsion Spring — Garage Door Opener Repair</video:title>
      <video:description>As a bonus tip, the host discusses checking the garage door&apos;s balance. To do this, manually disengage the garage door from the opener by pulling the red emergency release cord. Then, try to lift the door halfway up. If the door is either extremely heavy to lift or, conversely, shoots up too quickly on its own, it indicates an improper balance in the torsion spring system. An unbalanced door forces the opener to work harder and can cause it to stop closing as a safety measure. If the door is too heavy, the spring needs to be tightened; if it flies up, it&apos;s too tight. Adjusting torsion springs can be very dangerous due to the high tension and should generally be left to a qualified professional.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5yjNRXGa_BI</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10659-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vyzxlEsEuH8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Garage Door Balance — Garage Door Opener Repair</video:title>
      <video:description>To test the door balance, first, close the garage door completely. Next, locate and pull the red release handle to disconnect the carriage from the chain or belt drive system. This allows the door to be moved manually. Now, try to manually lift the door about halfway. If the door stays in place without falling or rising, it is properly balanced. To re-engage the carriage, move it back towards the opener and the door will reconnect to the drive system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vyzxlEsEuH8</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10660-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Al54GfjzOgM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Problem and Review Manual — Garage Door Opener Repair</video:title>
      <video:description>The video begins by showing a garage door opener unit with a solid red light illuminated, indicating a fault. A user attempts to operate the garage door using a &apos;Chamberlain&apos; brand remote control, but the door does not respond to any commands. To diagnose the issue, the user consults the &apos;Overhead Door&apos; owner&apos;s manual, specifically the &apos;Troubleshooting&apos; section. According to the manual, a solid red LED light with no response from the unit indicates that the travel limits are not set properly and require reprogramming.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Al54GfjzOgM</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10660-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pj4SSC9-BdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Thoughts and Manual/Support Advice — Garage Door Opener Repair</video:title>
      <video:description>The presenter concludes by emphasizing the importance of checking both the garage door opener&apos;s travel limit programming and the alignment of the safety sensors. He shares that the product manual often lacks direct technical support contact information, advising users to search online (e.g., Google) for the manufacturer&apos;s technical support phone number. He highlights that speaking with a technical support representative is often more effective than relying solely on the manual, as they can quickly identify and guide through common issues.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pj4SSC9-BdE</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10661-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7pyrwoHuxOA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Contact a Professional — Garage Door Opener Repair</video:title>
      <video:description>If your inspections reveal any issues, especially concerning the springs or other critical components, it is recommended to seek professional help. For more information on garage door safety and maintenance, or to find a qualified professional, visit garagedoorcare.com. You can input your zip code on their website to contact a local representative in your area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7pyrwoHuxOA</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10661-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/62eE_AYaUC4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Evaluate Results and Seek Service — Garage Door Opener Repair</video:title>
      <video:description>After observing the garage door&apos;s behavior, if it does not balance in all three positions—meaning it either drops down or rises up when released—then it indicates that the garage door springs are not properly tensioned. This could be due to worn-out springs, incorrect installation, or simple aging. An unbalanced door forces the garage door opener to work harder, leading to premature wear and potential failure of the opener. Furthermore, an unbalanced door can pose a significant safety hazard. The video explicitly states that if the door fails this test, there is a &apos;good chance that your door is in need of a service.&apos; It is strongly recommended to contact a professional garage door technician for proper inspection, adjustment, or replacement of the springs to ensure the safe and efficient operation of your garage door system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/62eE_AYaUC4</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10661-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gKPhLZ_oC78/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Garage Door Binding — Garage Door Opener Repair</video:title>
      <video:description>If all safety sensor checks prove inconclusive, the problem may be a physical issue with the garage door itself, specifically if it is binding or getting stuck during movement. To check for this, first, disconnect the garage door from the opener by pulling the red emergency release cord (usually a red handle attached to a rope hanging from the trolley). Once disengaged, try to manually open and close the garage door by hand. The door should move smoothly and easily along its tracks without excessive resistance, grinding, or sticking at any point. If the door binds, it indicates problems with the tracks, rollers, springs, or cables, which require further inspection or professional service.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gKPhLZ_oC78</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10647-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — wooden spiral staircase needs coir or sisal stair treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10647-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — wooden spiral staircase needs coir or sisal stair treads</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10647-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — wooden spiral staircase needs coir or sisal stair treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10648-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for First Winder Step — wooden spiral staircase needs coir or sisal stair treads</video:title>
      <video:description>Begin by taking a roll of kraft paper and unrolling it onto the second winder step (the first winder step to be templated). Line up one straight edge of the paper along the back edge of the tread, against the riser of the next step. Use an electric stapler to secure the paper in the middle of the riser, making sure the paper is flat and conforms to the step&apos;s shape. Fold the paper neatly around the nosing (the front edge of the step) and along the side edge of the winder. Secure it again with staples in the middle, ensuring staples are placed where they will be covered by the finished carpet runner and do not damage the visible part of the stairs if they were real finished stairs. Use a utility knife to carefully cut along the edges of the step, forming the exact shape of the winder tread and riser. This creates the first paper template. The presenter mentions that on actual stairs, the nosing would be thicker than the demo stairs, and emphasizes care when using the knife to avoid damaging the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>108</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10648-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m0TM4PCC8Tw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Creating Custom Templates for Each Step — wooden spiral staircase needs coir or sisal stair treads</video:title>
      <video:description>First, use painter&apos;s tape to mark the desired outline of the carpet runner on the stair treads, particularly around the quarter round and edges. Then, unroll the brown paper over the first tread and secure it temporarily with painter&apos;s tape. Use a pencil or marker to meticulously trace the exact shape of the stair tread onto the paper. Once traced, cut out the paper template with scissors or a utility knife. Repeat this process for all six pie-shaped steps, carefully numbering each template to maintain order. Secure the templates in place with a hammer stapler to prevent movement while tracing and cutting. Remember to account for the orientation of each step when numbering and preparing the templates, as they will be flipped for cutting the carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m0TM4PCC8Tw</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10648-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for Second Winder Step — wooden spiral staircase needs coir or sisal stair treads</video:title>
      <video:description>Repeat the templating process for the next winder step using a fresh piece of kraft paper. This involves aligning the paper, securing it with staples, folding it around the nosing and side edges, and cutting it to the exact shape of the step. As with the previous template, mark the runner&apos;s width, center line, and straight edges. Crucially, ensure that the measurements (e.g., 28 inches wide) for the runner remain consistent across all winder steps to maintain a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10646-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for First Winder Step — wooden spiral staircase needs coir or sisal stair treads</video:title>
      <video:description>Begin by taking a roll of kraft paper and unrolling it onto the second winder step (the first winder step to be templated). Line up one straight edge of the paper along the back edge of the tread, against the riser of the next step. Use an electric stapler to secure the paper in the middle of the riser, making sure the paper is flat and conforms to the step&apos;s shape. Fold the paper neatly around the nosing (the front edge of the step) and along the side edge of the winder. Secure it again with staples in the middle, ensuring staples are placed where they will be covered by the finished carpet runner and do not damage the visible part of the stairs if they were real finished stairs. Use a utility knife to carefully cut along the edges of the step, forming the exact shape of the winder tread and riser. This creates the first paper template. The presenter mentions that on actual stairs, the nosing would be thicker than the demo stairs, and emphasizes care when using the knife to avoid damaging the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>108</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10646-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for Second Winder Step — wooden spiral staircase needs coir or sisal stair treads</video:title>
      <video:description>Repeat the templating process for the next winder step using a fresh piece of kraft paper. This involves aligning the paper, securing it with staples, folding it around the nosing and side edges, and cutting it to the exact shape of the step. As with the previous template, mark the runner&apos;s width, center line, and straight edges. Crucially, ensure that the measurements (e.g., 28 inches wide) for the runner remain consistent across all winder steps to maintain a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10646-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m0TM4PCC8Tw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Creating Custom Templates for Each Step — wooden spiral staircase needs coir or sisal stair treads</video:title>
      <video:description>First, use painter&apos;s tape to mark the desired outline of the carpet runner on the stair treads, particularly around the quarter round and edges. Then, unroll the brown paper over the first tread and secure it temporarily with painter&apos;s tape. Use a pencil or marker to meticulously trace the exact shape of the stair tread onto the paper. Once traced, cut out the paper template with scissors or a utility knife. Repeat this process for all six pie-shaped steps, carefully numbering each template to maintain order. Secure the templates in place with a hammer stapler to prevent movement while tracing and cutting. Remember to account for the orientation of each step when numbering and preparing the templates, as they will be flipped for cutting the carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m0TM4PCC8Tw</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10645-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measuring your stairs for treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10645-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — measuring your stairs for treads</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10645-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Your Drawing — measuring your stairs for treads</video:title>
      <video:description>Once the sub-treads are exposed, consult the provided Stair Supplies engineered tread drawings. Verify that all the new treads are accounted for and that their dimensions, such as tread width, tread depth, and nosing depth, match the specifications on the drawing. Use a tape measure to confirm these dimensions. This crucial step helps prevent errors during the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10644-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measuring your stairs for treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10644-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measuring your stairs for treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10644-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IOgUldDtg1c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet — measuring your stairs for treads</video:title>
      <video:description>Measure the width of the stair tread from stringer to stringer (e.g., 36 1/8 inches) and the depth from the nose to the back riser (e.g., 13 inches). To allow for trimming and a snug fit, cut the carpet pieces slightly larger than these measurements (e.g., 37 inches wide by 14 inches deep). Use a utility knife and a straight edge to ensure clean, straight cuts. You will need one carpet piece per tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IOgUldDtg1c</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10643-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measuring your stairs for treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10643-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — measuring your stairs for treads</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10643-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IOgUldDtg1c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet — measuring your stairs for treads</video:title>
      <video:description>Measure the width of the stair tread from stringer to stringer (e.g., 36 1/8 inches) and the depth from the nose to the back riser (e.g., 13 inches). To allow for trimming and a snug fit, cut the carpet pieces slightly larger than these measurements (e.g., 37 inches wide by 14 inches deep). Use a utility knife and a straight edge to ensure clean, straight cuts. You will need one carpet piece per tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IOgUldDtg1c</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10642-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — measuring your stairs for treads</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10642-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — measuring your stairs for treads</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10642-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JS1W3Ns2Zgw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Measurements and Platform Design — measuring your stairs for treads</video:title>
      <video:description>Begin by accurately measuring the total rise (vertical height) and run (horizontal depth) for the entire staircase. Design an initial landing platform strategically to prevent the stairs from encroaching into adjacent spaces, such as a hallway. It is crucial to ensure adequate head space above this landing. If the initial platform height results in insufficient head clearance, adjust its level accordingly. Additionally, consider designing the landing platform to be about 12 inches longer than strictly necessary for a 3-foot wide stair tread, as this extra length can simplify turns and reduce the need for complex custom cuts later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JS1W3Ns2Zgw</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10639-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — fix popping noises from carpet stair treads installed with adhesive on w</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10639-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — fix popping noises from carpet stair treads installed with adhesive on w</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10639-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — fix popping noises from carpet stair treads installed with adhesiv</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10637-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — fix popping noises from carpet stair treads installed with adhesiv</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10637-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Remaining Stair Treads — fix popping noises from carpet stair treads installed with adhesive</video:title>
      <video:description>Repeat the cleaning, marking (if necessary), and installation process for each remaining stair. Use the template or marks created earlier to maintain consistency in placement. Peel the backing, align, and firmly press each tread into place until all stairs have been covered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10637-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0l3UWfmoDiY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Remaining Stair Treads — fix popping noises from carpet stair treads installed with adhesive</video:title>
      <video:description>Continue the installation process by placing the remaining carpet stair treads on each subsequent step of the staircase. For each tread, repeat the steps of careful positioning and firm pressing to ensure secure adhesion and consistent alignment. Maintain uniform spacing between the back of each tread and the stair riser, as well as consistent side margins, to create a neat and professional appearance. Since the treads are designed to be removable, minor adjustments can be made during installation if needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0l3UWfmoDiY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10638-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — fix popping noises from carpet stair treads installed with adhesive on w</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10638-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stair Treads — fix popping noises from carpet stair treads installed with adhesive on wood sta</video:title>
      <video:description>Starting from the top of the staircase, the homeowner carefully installs each stair tread. She begins by peeling off the protective plastic film from the adhesive backing. The tread is then aligned precisely with the previously marked tape lines, ensuring the back edge is flush with the riser. Once aligned, she firmly presses the tread onto the step, making sure it adheres well, especially over the bullnose (the rounded edge of the step). This process is repeated for each individual stair tread and for the larger custom pieces on the landings. The homeowner notes that the adhesive is designed not to damage the existing hardwood stairs, making it a suitable option for temporary or non-permanent installations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10638-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — fix popping noises from carpet stair treads installed with adhesiv</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10636-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stair Surface — fix popping noises from carpet stair treads installed with adhesive on w</video:title>
      <video:description>Although not explicitly demonstrated in the video, it is crucial to ensure the staircase is clean before installing the treads. Thoroughly clean each wooden stair surface to remove any dust, dirt, pet hair, or debris. This preparation ensures optimal adhesion of the non-slip backing, preventing the treads from shifting and maintaining a neat appearance. Use a vacuum cleaner for loose particles, followed by a damp cloth and a mild cleaner if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10636-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — fix popping noises from carpet stair treads installed with adhesive on wood stair</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10636-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rON0c9UvU2E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Clean Stair Treads — fix popping noises from carpet stair treads installed with adhesive</video:title>
      <video:description>Begin by thoroughly cleaning the stair treads. You can use a microfiber cloth or any suitable cloth, optionally combined with a handheld vacuum, to remove all dust and loose dirt. The goal is to ensure the entire stair surface is clean and completely dry. This is crucial for the adhesive on the back of the carpet treads to stick properly. Avoid using any cleaning products that might leave a greasy residue, such as Pledge or Pine-Sol, as this can compromise the adhesive bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rON0c9UvU2E</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10641-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WfrIcn1Alic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Flooring with a Roller — fix popping noises from carpet stair treads installed with adhesive </video:title>
      <video:description>Once the sheet flooring is laid over the adhesive, use a heavy floor roller to firmly press the entire surface of the flooring. Start from the center of the room and roll outwards towards the edges. This action expels any trapped air bubbles beneath the flooring and ensures maximum contact and adhesion between the flooring and the adhesive layer. Continue rolling until the entire surface has been thoroughly pressed, paying special attention to seams and edges.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WfrIcn1Alic</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10641-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iq3Fj4Osfxg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Tiles with Roller — fix popping noises from carpet stair treads installed with adhesive on wo</video:title>
      <video:description>After all the 12x12 peel and stick vinyl tiles have been installed, use a roller to firmly roll over the entire tiled surface. Apply consistent pressure and roll in all directions (north-south, east-west, and diagonally). This action helps to ensure maximum contact between the tile&apos;s TACSTRONG adhesive and the subfloor/wall, pressing out any trapped air bubbles and strengthening the bond for a durable installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iq3Fj4Osfxg</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10641-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XN_-_oYavOw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Roll and Secure Floor Covering — fix popping noises from carpet stair treads installed with adhesive</video:title>
      <video:description>As soon as the adhesive begins to secure the floor covering (meaning it has started to set enough to prevent significant movement), use a heavy flooring roller. Roll the entire surface of the newly laid floor covering from end to end and then from side to side. This action ensures good overall contact between the floor covering and the adhesive, pressing out any remaining air and firmly seating the material for a strong, lasting bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XN_-_oYavOw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10640-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark First Tread Placement — fix popping noises from carpet stair treads installed with </video:title>
      <video:description>Take the first stair tread and center it on the first stair. Once properly positioned, use a piece of cardboard or painter&apos;s tape to mark the exact placement of the tread on the stair. This will serve as a consistent guide for positioning all subsequent treads, ensuring a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10640-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread Placement — fix popping noises from carpet stair treads installed with adhesi</video:title>
      <video:description>To ensure accurate and consistent placement of each stair tread, the homeowner uses blue painter&apos;s tape to mark the desired position on the hardwood steps. A measuring tape is used to confirm precise spacing and alignment, ensuring a symmetrical reveal of the wood on both sides of each tread. This meticulous marking helps maintain a uniform and professional look across the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10640-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WjkM8ou_xoI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Stair Tread Placement — fix popping noises from carpet stair treads installed with </video:title>
      <video:description>To ensure consistent and straight placement of the carpet treads, measure the desired distance from the edge of the stairs. Then, use blue painter&apos;s tape to create parallel guide lines up the entire staircase. This helps in visually aligning each tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WjkM8ou_xoI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10635-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure for stair treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10635-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure for stair treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10635-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — measure for stair treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10632-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — measure for stair treads</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10632-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FiwJtKWIGJk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation of Stairs and Gathering Tools — measure for stair treads</video:title>
      <video:description>Before starting the installation, gather all necessary tools and materials as shown. Prepare the existing stairs by removing any old staples, nails, fasteners, or adhesives using a scraping tool. Thoroughly sweep and vacuum all step treads and risers to ensure they are clean, smooth, and structurally sound. If your stairs have an existing overhang, modify them by either cutting off the overhang or filling in the area beneath it to ensure the riser is flush with the step edge. Use a drill to secure any loose elements, ensuring all modifications comply with local building codes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FiwJtKWIGJk</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10632-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Subfloor and Measure Riser — measure for stair treads</video:title>
      <video:description>Before beginning the installation, ensure the subfloor of the stairs is thoroughly clean. Then, use a stair tread templating tool to accurately measure the dimensions of the stair riser. This tool is crucial because stairs are rarely perfectly square, allowing for precise transfer of measurements to the flooring material.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10633-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure for stair treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10633-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure for stair treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10633-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — measure for stair treads</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10634-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure for stair treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10634-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Your Drawing — measure for stair treads</video:title>
      <video:description>Once the sub-treads are exposed, consult the provided Stair Supplies engineered tread drawings. Verify that all the new treads are accounted for and that their dimensions, such as tread width, tread depth, and nosing depth, match the specifications on the drawing. Use a tape measure to confirm these dimensions. This crucial step helps prevent errors during the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10634-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measure for stair treads</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10631-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Treads — I want to replace the carpet of 15 stair steps with a landing and turn at</video:title>
      <video:description>Starting from the bottom step of the staircase, carefully align the first prepared stair tread onto the wooden step. Ensure the tread is centered, positioned straight, and covers the desired area of the step. Once satisfied with the placement, firmly press the tread down across its entire surface, paying close attention to the edges and corners, to securely bond the adhesive to the wood. The installer in the video kneels and crawls up the stairs, applying significant body weight to ensure good contact. Repeat this alignment and pressing process for all remaining stairs, working your way up the staircase one tread at a time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10631-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — I want to replace the carpet of 15 stair steps with a landing and turn a</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10631-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — I want to replace the carpet of 15 stair steps with a landing and </video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10628-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — I want to replace the carpet of 15 stair steps with a landing and turn at ste</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10628-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — I want to replace the carpet of 15 stair steps with a landing and</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10628-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — I want to replace the carpet of 15 stair steps with a landing an</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10627-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4FF_td_O8ps/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify and Measure Out-of-Square Deviations — I want to replace the carpet of 15 stair steps with </video:title>
      <video:description>When an existing stair landing or tread is not perfectly square, a pre-cut replacement based on 90-degree assumptions will result in a noticeable gap along one or more edges. To identify this, position the pre-cut piece (or a rough template) in place. Observe where the gaps occur. To accurately measure the deviation, place a framing square firmly against one straight edge of the existing stair component (e.g., the front edge). Measure the largest gap between the other arm of the framing square and the side edge of the stair component. For example, if the gap is 1 5/16 inches at a certain point along the edge, this measurement quantifies the out-of-square condition.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4FF_td_O8ps</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10627-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4FF_td_O8ps/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Method for Perfectly Square Corners — I want to replace the carpet of 15 stair steps with a landing </video:title>
      <video:description>If the existing stair landing or tread corner is a perfect 90-degree angle, simply measure the two sides from the corner. For example, if both sides measure 44 inches, mark these points on the new piece of plywood, starting from a square corner. Then, draw a straight line connecting these two marked points. This creates the exact 90-degree triangular pattern needed for the new component.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4FF_td_O8ps</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10627-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nCu4uIwBOOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Stairs — I want to replace the carpet of 15 stair steps with a landing and turn at step </video:title>
      <video:description>To ensure the carpet runner is long and wide enough, accurate measurements are essential. First, select one stair tread (the horizontal top surface of a step) and measure its depth. Next, measure the height of the riser (the vertical part of the step). Multiply the height by the number of risers and the depth by the number of treads on your staircase. Add these two sums together, then add an additional 6 to 8 inches to account for waste. This total will be the required length of the runner. If using more than one runner, add an additional 12 inches to the total length to account for seams where the two carpet pieces will join. If your staircase includes a landing and you plan to install the runner there, ensure you include the landing area in your measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nCu4uIwBOOE</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10629-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CtnOYw-UEDw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select, Order, and Unpack Custom Stair Treads — I want to replace the carpet of 15 stair steps with </video:title>
      <video:description>Recognizing the limitation of traditional stair runners for a floating staircase, the homeowner identifies &quot;Oak Valley Designs&quot; as a specialist in custom stair treads. They review various fabric options, including different patterns and textures, as shown through samples. Once selected, the custom treads are received and unboxed, revealing the chosen design (a dark pattern with white and brown accents) and individual protective plastic wrapping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CtnOYw-UEDw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10629-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — I want to replace the carpet of 15 stair steps with a landing and turn at step</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10630-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — I want to replace the carpet of 15 stair steps with a landing and turn at step</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10630-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Winder Steps and Extensions — I want to replace the carpet of 15 stair steps with a landing </video:title>
      <video:description>Once you are satisfied with the dry fit of all the pieces, it&apos;s time for permanent installation. Apply a generous amount of polymer adhesive using a caulk gun to the subfloor of the landing area where the steps will sit, creating a strong bond. Additionally, apply wood glue to the tongue and groove edges of the winder step and extensions to ensure a strong, interlocked bond between the individual pieces. Carefully position and press the winder step into place, ensuring it&apos;s flush, followed by the winder step extensions. Secure the installed pieces by firing brads using a brad nailer around the outer edge, specifically in areas where they will be hidden by the next riser or the reinstalled skirting boards, ensuring a clean, nail-free visible surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10630-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VAfl-FmlGhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Staircase Layout and Landing Installation — I want to replace the carpet of 15 stair steps with a la</video:title>
      <video:description>After preparing all the timber, allow it to rest for two days. This resting period helps the wood stabilize before permanent installation. Then, install the top landing. Begin by marking the position of the staircase at the installation site using a laser level and measuring tape for accuracy. Ensure the exposed sill, called &apos;kamachi&apos;, which was previously installed with the second floor, is properly aligned. Add an additional kamachi made from pine, matching the step size, to the front of the landing. The landing floor will use the same flooring as the second floor. Secure all components using screws and a drill.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VAfl-FmlGhE</video:player_loc>
      <video:duration>125</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10624-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — measure my stairs for stair treads, including 12 steps and 1 landing</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10624-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure my stairs for stair treads, including 12 steps and 1 landing</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10624-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure my stairs for stair treads, including 12 steps and 1 land</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10625-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — measure my stairs for stair treads, including 12 ste</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10625-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — measure my stairs for stair treads, including 12 steps and 1 landing</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10625-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2rkFnsTztog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Risers — measure my stairs for stair treads, including 12 steps and 1 landing</video:title>
      <video:description>Use a stair tread jig to measure the exact dimensions of each riser. Place the jig on the stair, adjust its arms to fit snugly against the side stringers and the top of the current tread, and then lock it in place. Take the jig to your riser material (e.g., plywood), place the jig on it, and mark the cut lines with a pencil. Repeat this process for each riser, as each stair will likely have slightly different dimensions. Cut the marked riser pieces using a miter saw, carefully aligning the blade with your pencil lines. Label the back of each cut riser with its corresponding stair number and its top edge to maintain organization, as each piece is unique.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2rkFnsTztog</video:player_loc>
      <video:duration>131</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10623-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — measure my stairs for stair treads, including 12 steps and 1 landing</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10623-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — measure my stairs for stair treads, including 12 steps and 1 landing</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10623-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hBQ9-Oz5oFc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stairs and Measure Dimensions — measure my stairs for stair treads, including 12 steps and 1</video:title>
      <video:description>Before starting the carpet installation, ensure the stairs are clean and free of debris. Measure the width of each stair tread and riser using a measuring tape. These measurements will be crucial for cutting the tack strips, underlay, and carpet accurately. The video shows the before state of the stairs, with old carpet removed, revealing bare wood.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hBQ9-Oz5oFc</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10626-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — measure my stairs for stair treads, including 12 steps and 1 landing</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10626-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — measure my stairs for stair treads, including 12 steps and 1 land</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10626-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — measure my stairs for stair treads, including 12 steps and 1 landing</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10622-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — how to measure stairs</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10622-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — how to measure stairs</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10622-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — how to measure stairs</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10619-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Learn Terminology &amp; Gather Tools/Materials — how to measure stairs</video:title>
      <video:description>Before starting the physical build, familiarize yourself with staircase terminology: &apos;stringers&apos; are the timber pieces that run along either side of the steps, &apos;treads&apos; are the individual steps that sit between the stringers, &apos;rise&apos; refers to the vertical height between one tread and the next, and &apos;nosing&apos; is the front edge of a tread. Gather all necessary tools and materials, including timber, a threaded rod, 100mm bugle screws, timber preservative, nuts and washers, a roofing square, a circular saw, and a router. Critically, before any construction begins, ensure you check local council regulations regarding stair size and height requirements, as a handrail might be mandatory above a certain height. Also, plan to build your stairs as close as possible to their final installation location, as they will be heavy once complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10619-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — how to measure stairs</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10619-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — how to measure stairs</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10621-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — how to measure stairs</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10621-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — how to measure stairs</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10621-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Treads — how to measure stairs</video:title>
      <video:description>After the risers are installed, measure the depth and length of each individual stair tread. According to these measurements, cut your new hardwood treads. It&apos;s crucial to be accurate, as even small errors can lead to visible gaps. You may need to make slight adjustments to ensure a gap-free fit. A track saw, set at a 5-degree angle as demonstrated, can be particularly useful for making precise, straight cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10620-1</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — how to measure stairs</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10620-2</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eshpVa6P3mY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Verify Rise and Run — how to measure stairs</video:title>
      <video:description>According to the Uniform Building Code, the &apos;rise&apos; (vertical height from the top of one step to the top of the next) should be 8 inches for residential homes. The &apos;run&apos; (horizontal surface area or tread depth) should be 9 inches. The host uses a tape measure to illustrate these critical dimensions on an unfinished staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eshpVa6P3mY</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/10620-3</loc>
    <lastmod>2026-09-16T00:00:00.000Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R4kXacNvKGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Validate Riser and Tread Codes — how to measure stairs</video:title>
      <video:description>This step emphasizes determining local building code requirements for maximum riser height and minimum tread depth. For example, a common residential code is a 10-inch minimum tread depth and a 7 11/16-inch maximum riser height, but these can vary (e.g., 9-inch tread or 8-inch riser). It is critical to validate these specific measurements for your project location before proceeding with design calculations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R4kXacNvKGQ</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-09-16T00:00:00.000Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
</urlset>