<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"
        xmlns:video="http://www.google.com/schemas/sitemap-video/1.1">
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12467-1</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Th_8nPda_VI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power at the Breaker — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Before beginning any electrical work, locate your electrical panel, typically found in a basement, garage, or utility closet. Identify the circuit breaker that controls the light fixture you will be working on. The presenter identifies the &apos;Kitchen Circuit Lights&apos; breaker. Flip this specific breaker to the &apos;off&apos; position to cut power to the circuit. It is crucial to verify that the power is off before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Th_8nPda_VI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12467-2</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DjoTZQQpWec/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Electrical Power — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Before beginning any electrical work, locate your home&apos;s main electrical panel. Identify the circuit breaker that controls the power to the specific room or light fixture you will be working on. Flip the corresponding circuit breaker to the &apos;OFF&apos; position. It is crucial to verify that the power is off at the light switch or by using a non-contact voltage tester before proceeding to the next steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DjoTZQQpWec</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12467-3</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KFl2DSktMeM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>De-energize Circuit and Verify Safety — How to Add Smart Bulbs and Motion Automations to Stair Light</video:title>
      <video:description>Before beginning any electrical work, locate the circuit breaker panel for your home. Identify the specific circuit breaker that controls the power to the porch lights. Flip the breaker to the &apos;OFF&apos; position to cut power to the fixture. As an essential safety measure, use a non-contact voltage tester to verify that the power is indeed off at the light fixture&apos;s socket. The tester should not illuminate or beep, confirming it is safe to proceed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KFl2DSktMeM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12468-1</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lJM3L4xcwbg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Light Fixture — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Prioritize safety by ensuring the power to the light fixture is turned off at the circuit breaker or the wall switch controlling it. Use a voltage detector to confirm that no power is present at the fixture&apos;s wiring. Carefully remove any glass shades or fragile components from the old fixture to prevent accidental breakage during removal. Next, unscrew the decorative nuts or screws holding the old ceiling plate. Support the fixture as you unscrew it. Disconnect the electrical wires: typically, these are black (hot), white (neutral), and bare copper (ground). Unscrew the wire nuts connecting the fixture&apos;s wires to the house wiring, and detach the ground wire from its screw terminal or wire nut. Once all wires are disconnected, remove the old mounting bracket from the ceiling electrical box.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lJM3L4xcwbg</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12468-2</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8-vnVxVSJfs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Light Fixture — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Using a screwdriver, locate and unscrew the fasteners holding the old light fixture to its mounting bracket on the wall. Carefully pull the fixture away from the wall to expose the electrical wires. Unclip or unscrew the wire nuts connecting the house&apos;s wiring to the old light fixture&apos;s wiring. Disconnect the ground wire, neutral wire, and hot wire. Once all wires are disconnected, completely remove the old light fixture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8-vnVxVSJfs</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12468-3</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6XEBJ3A6MZo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Existing Light Fixture — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Using a screwdriver, remove any screws securing the old fixture&apos;s canopy or cover to the ceiling box. Support the fixture as you remove the screws to prevent it from falling. Once the cover is off, you will see the wiring connections. Unscrew the wire nuts connecting the fixture&apos;s wires (typically black, white, and bare copper/green) to the house wiring. Loosen any screws holding the mounting bracket to the electrical box and remove the old fixture completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6XEBJ3A6MZo</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12469-1</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Cx8UQDoDoyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Smart Light Bulb(s) — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Carefully remove the traditional light bulb from your desired fixture. Screw in the new smart light bulb, ensuring it is tightened appropriately. Repeat this process for all light fixtures you intend to automate. For safety, always turn off the power at the circuit breaker or wall switch before handling light fixtures.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Cx8UQDoDoyE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12469-2</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RTZO4S3Fbts/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Smart LED Bulb — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>With the old bulb removed, you are now ready to install your new smart LED bulb. Carefully take the new smart bulb out of its packaging. Hold the base of the bulb and gently twist it clockwise into the empty light socket until it is snug. Avoid overtightening, as this can damage the bulb or the socket. Once installed, turn on the lamp or light fixture using its switch. The new smart bulb should immediately illuminate, indicating it has power and is ready for the next steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RTZO4S3Fbts</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12469-3</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ril-vMSy46M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Smart Bulb into Fixture — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>With the smart bulb in hand, carefully screw it into the existing light fixture, such as a floor lamp. Turn it clockwise until it is snug but do not overtighten. Ensure the fixture is powered off before screwing in the bulb to prevent electrical hazards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ril-vMSy46M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12470-1</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xhBnxFFmMVA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drill for and Install Motion Sensors — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Using a drill equipped with a hole saw or appropriate drill bit, carefully drill holes at strategic locations on the staircase wall or steps where motion sensors will be installed. Typically, these are placed at the top and bottom of the staircase, and potentially at landings, to ensure full coverage for motion detection. Once drilled, insert the motion sensor heads into these holes, ensuring they are flush or slightly protruding for optimal detection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xhBnxFFmMVA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12470-2</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YABc4pYG6Ho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Wire Motion Sensors — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>The system includes two motion sensors. Three types are available: flush-mounted (comes with a back box; install the back box with screws, then clip the sensor in), surface-mounted (small and light; attach using double-sided adhesive tape or glue), and baluster-mounted (designed to fit within a baluster; insert into a correctly sized recess and secure with adhesive tape, glue, or another preferred method). Position one motion sensor at the top of the stairs and the other at the bottom, ensuring that anyone entering the staircase will cross the sensor&apos;s detection beam. Each motion sensor is supplied with a 3-core cable, typically colored red, black, and green. For each sensor, insert each core wire into the corresponding color-coded terminal on the control unit. Pay close attention to which terminals are designated for the top sensor (&apos;Góra&apos;) and which for the bottom sensor (&apos;Dół&apos;). Tighten the terminal screws firmly to ensure a secure connection for all wires.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YABc4pYG6Ho</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12470-3</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mb-QXVszyOk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Motion Sensors and Electronic Box — How to Add Smart Bulbs and Motion Automations to Stair Lig</video:title>
      <video:description>Use 3D-printed mounts to attach PIR motion sensors to the underside of the handrail, ensuring they can be adjusted to aim at the desired detection zones on the stairs. Route the sensor wires into the wall, joining the LED wires at the bottom of the staircase. Cut a rectangular hole in the wall large enough to house a project box. Drill appropriate holes in the project box to mount the 40A power supply and the Arduino Uno. Carefully manage all wires, feeding them into the box. This centralizes all control and power components, making them accessible for troubleshooting or future modifications.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mb-QXVszyOk</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12471-1</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Cx8UQDoDoyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Smart Bulb(s) to System — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>After launching the app, initiate the device discovery or pairing mode. This often involves ensuring the smart bulbs are powered on and within range of your Wi-Fi router or smart hub (if applicable). The app will guide you through connecting each bulb, which might include confirming the bulb is blinking, entering your Wi-Fi credentials, or pressing a button on a hub. Name each bulb according to its location (e.g., &apos;Living Room Lamp&apos;, &apos;Kitchen Overhead&apos;) for easy identification and control.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Cx8UQDoDoyE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12471-2</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OeSHOBzqaIE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Network Integration &amp; Device Pairing — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>With the hardware physically installed, the next crucial step is to connect all IoT lighting devices to the home&apos;s network and pair them with a central smart home hub or their respective manufacturer&apos;s app. The synchronized and complex display on the tower implies a robust control system. For a smart home, this involves downloading necessary apps, connecting devices to Wi-Fi, and following pairing instructions. This establishes the communication backbone for controlling the lights, allowing for centralized management and synchronized effects.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OeSHOBzqaIE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12471-3</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/42hbvAEvSK4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pair with Smart Home System — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>After physical installation, turn on the power to the light fixture. Open the dedicated app for your smart bulb (e.g., Philips Hue app, Smart Life app) or your smart home assistant app (e.g., Amazon Alexa app, Google Home app). Follow the on-screen instructions to discover and pair the new smart bulb with your system. This often involves ensuring the bulb is in &apos;pairing mode&apos; (sometimes by cycling power a few times) and confirming its detection in the app. This step establishes the IoT connection via Wi-Fi, Bluetooth, or Zigbee protocols, linking the smart appliance to your home network.</video:description>
      <video:player_loc>https://www.youtube.com/embed/42hbvAEvSK4</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12472-1</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/toNVmPoyAfk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Configure Automations in SmartThings &apos;Smart Lighting&apos; App — How to Add Smart Bulbs and Motion Automa</video:title>
      <video:description>All lighting automations are configured using the &apos;Smart Lighting&apos; app within the SmartThings ecosystem. This app allows you to create highly customized rules. To set up an automation, you&apos;ll select the specific motion sensor or multi-purpose sensor that will serve as the trigger. Then, choose the smart lights, light strips, or smart switches you want to control. You can specify actions such as turning lights on to a certain dimmer level, automatically turning them off after motion stops (with a customizable delay), and restricting the automation to specific times of day (e.g., sunset to sunrise or a custom time range like 9:00 PM to 4:30 AM) or even particular days of the week. This flexibility allows for precise control over your home&apos;s automated lighting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/toNVmPoyAfk</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12472-2</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f38TjSe3G48/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Up Automation Routines — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>The video explicitly mentions setting up &apos;routines&apos; for your smart light bulbs to achieve a &apos;cozy warm look.&apos; This is where automation comes into play. Navigate to the &apos;Routines,&apos; &apos;Schedules,&apos; or &apos;Automation&apos; section within your smart lighting app. Here, you can create rules that automatically change your lights. Examples include: scheduling lights to gradually brighten in the morning with a cool white hue, dimming to a warm amber in the evening, or setting specific &apos;scenes&apos; (e.g., &apos;Movie Night&apos; with dim, warm lights) to activate at a set time or with a single command. These routines ensure your home&apos;s ambiance automatically adapts without manual intervention.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f38TjSe3G48</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12472-3</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OOcJG8a77HQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Configure Motion Automation — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>After pairing the motion sensor, navigate to the automation or &apos;Auto Run&apos; section within the Govee Home app to set up an &apos;if/then&apos; command. For the &apos;if&apos; condition, select the newly paired motion sensor and specify &apos;Movements Detected&apos;. For the &apos;then&apos; action, choose the Govee smart lights you wish to control (for example, &apos;Glide Lights&apos;) and set the desired outcome, such as turning them &apos;On&apos;. You will need to give a name to this automation, for example, &apos;Test&apos;. This configuration dictates that when the motion sensor detects movement, the specified Govee lights will automatically turn on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OOcJG8a77HQ</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12473-1</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fgORCrrGXiM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Adjust the System — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>After all components are installed and wired, apply power to the system. The video then shows a person walking onto the stairs, demonstrating the sequential illumination. Walk up and down the stairs to test the motion sensors&apos; activation and the lighting sequence. If needed, adjust the sensitivity or timing settings on the controller (refer to the manufacturer&apos;s manual for specific instructions) to achieve the desired effect. Confirm that all LED light bars are working correctly and the motion sensors reliably detect presence at both ends of the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fgORCrrGXiM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12473-2</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xda1chrQ4yQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Final System Testing and Verification — How to Add Smart Bulbs and Motion Automations to Sta</video:title>
      <video:description>Conduct a final test of the entire system by walking up and down the staircase. Observe if the radar sensors accurately detect presence and motion, if the LED animations trigger correctly based on the direction of travel, and if the lights turn off after the set delay. Verify that the system responds as expected without any false triggers or malfunctions. The video demonstrates the smooth operation of the staircase lighting, including the animated light-up sequence and the timed turn-off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xda1chrQ4yQ</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12473-3</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xda1chrQ4yQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final System Test and Verification — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Perform a final test of the entire smart staircase lighting system. Walk up and down the stairs to verify that the radar sensors accurately detect presence, trigger the LED strips, and initiate the programmed animations (&apos;Staircase Bottom Top&apos; and &apos;Staircase Top Bottom&apos;). Observe that the lights animate smoothly and turn off automatically after the configured 30-second delay. Confirm that the system&apos;s behavior is consistent and reliable, effectively solving the problems identified in the initial setup. The enhanced system now offers wireless control, reliable motion detection, remote debugging capabilities, and an improved aesthetic, making the staircase both safer and more appealing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xda1chrQ4yQ</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12474-1</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rZ5CwC355Bo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power to Circuit — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>After the physical installation is complete, return to the electrical panel and flip the circuit breaker back to the &apos;ON&apos; position to restore power to the circuit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rZ5CwC355Bo</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12474-2</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZLRxr3RK-p8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power to Circuit — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Once all connections are made and secured, return to your main electrical panel. Flip the circuit breaker that you previously turned off back to the &apos;ON&apos; position. Close the protective cover of the electrical panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZLRxr3RK-p8</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12474-3</loc>
    <lastmod>2026-11-13T23:56:05.462Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UH-8qv-qlK8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power — How to Add Smart Bulbs and Motion Automations to Stair Lights</video:title>
      <video:description>Return to your electrical panel and flip the circuit breaker back to the &apos;ON&apos; position. This restores power to the outlet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UH-8qv-qlK8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:56:05.462Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12460-1</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BSuA1tSDrAE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess and Prepare Under-Stair Space — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Begin by clearing out any existing debris or obstructions from the under-stair area. Accurately measure the height, width, and depth of the usable space. Identify where the primary wardrobe will sit and where the hidden compartment can be integrated. Inspect the area for any existing electrical wiring, plumbing pipes, or critical structural elements that might interfere with the proposed storage design. Plan for any necessary framing or modifications to create a solid and level enclosure for the storage unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BSuA1tSDrAE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12460-2</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bho9yzY3DS0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear and Assess Under-Stair Space — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Begin by assessing the under-stair area, which is typically used as a dumping ground for various items like children&apos;s toys and shoes. Remove all existing clutter to clear the space completely. The goal is to transform this area into functional storage, utilizing not just the floor space but also the wall space and the angled underside of the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bho9yzY3DS0</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12460-3</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7JPVxxkUVeE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess and Plan Under-Stair Space — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Carefully examine the under-stair area, as shown in the video&apos;s initial frames (0:00-0:05), which depicts a framed, closed-off section. Determine if any walls in this area are load-bearing. If so, modifications will require professional assessment and potentially engineered solutions to maintain structural integrity. Discuss with your builder or a qualified professional the possibility of opening the space to create storage. Once confirmed, conceptualize the desired storage solution, considering the depth, height, and angle of the available space. Sketch out ideas for shelves, cubbies, drawers, or other custom elements based on your specific storage needs, as implied by the custom cubby framing in the &apos;after&apos; section (0:06-0:14).</video:description>
      <video:player_loc>https://www.youtube.com/embed/7JPVxxkUVeE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12461-1</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h--qUnTcE1E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Your Pantry Layout — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Begin by envisioning the ideal layout for your pantry. Create a detailed drawing of each shelf, mentally or physically assigning specific categories of items or organizational tools to each area. Consider the homeowner&apos;s unique needs, such as incorporating a command center for important documents and schedules, or dedicated spaces for snacks and paper products. This crucial planning step ensures that all purchased organizational solutions, like bread boxes, canisters, or baskets, will fit correctly and serve their intended purpose, preventing wasted money and time on unnecessary purchases or returns. The video showcases examples of a bread box, clear canisters with airtight clasps, and turquoise mesh baskets as potential items to consider during this planning stage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h--qUnTcE1E</video:player_loc>
      <video:duration>129</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12461-2</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gdo7gpDlPuE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Your Shelving Layout — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Before beginning construction, carefully measure the dimensions of your designated pantry or root cellar space. This includes height, width, and depth. Consider the types of items you plan to store, such as canned goods, boxed items, and fresh produce (like potatoes and onions). Design the shelving layout to maximize vertical and horizontal space, ensuring adequate clearance for items and airflow. Sketch out a plan for the shelf heights and depths, noting where wire mesh enclosures will be incorporated. The visible pantry in the video utilizes a multi-tiered shelving system that wraps around the walls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gdo7gpDlPuE</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12461-3</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CT_qQ3WOnKs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan and Design Shelving Units — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Begin by accurately measuring the pantry closet dimensions. Utilize a digital shelf configurator (e.g., Ana White&apos;s Shelf Help tool) to input desired depth, width, and height for the shelving units. This step involves visually planning the layout, including the number of bays and overall structure, to optimize storage and fit seamlessly into the existing closet. The configurator provides precise cut lists for the material.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CT_qQ3WOnKs</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12462-1</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Cj1sR2SC-94/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear and Prepare the Closet — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Begin by removing all existing items from the closet. This includes any junk, old shelving, or rods. After clearing, use spackle to fill any holes or imperfections in the walls left by previous installations. Once the spackle is dry, sand the patched areas smooth to prepare the walls for painting and new installations. The creator removed an old rod and associated hardware.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Cj1sR2SC-94</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12462-2</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pu2y2_OpMik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Closet Interior — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>With the shelves removed, clean the interior of the closet. Use a spray cleaner and a cloth to thoroughly wipe down all surfaces, including walls, baseboards, and any remaining fixtures. This prepares the closet for painting and ensures a fresh, clean foundation for the new organization system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pu2y2_OpMik</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12462-3</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KyBIaIj6-Wo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Closet Space — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Begin by completely emptying the closet of all its contents, including clothes, hangers, and any existing furniture like dressers. Once empty, remove any old shelving, hanging rods, or other fixtures. Patch any holes or damage on the walls using spackle or joint compound, ensuring a smooth surface. After the patches dry, sand them flush with the wall. Finally, paint the entire interior of the closet with a fresh coat of paint, preparing it for the installation of the new shelving system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KyBIaIj6-Wo</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12463-1</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WSGJtoLDRA8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Shelf Brackets — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>With the stud locations already marked, double-check and measure precisely where each shelf bracket will be positioned. Use a large level to ensure that the marks for each pair of brackets are perfectly horizontal, guaranteeing level shelves. Once confirmed, use a drill to screw the shelf brackets firmly into the wall studs. This provides the necessary structural support for the shelves and any items placed on them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WSGJtoLDRA8</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12463-2</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WugV5jDKTcg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Shelf Supports — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Use a laser level to project a straight line for shelf placement, ensuring all shelves will be perfectly level. Employ a magnetic stud finder to locate wall studs for secure attachment. For areas without studs, pre-drill smaller pilot holes, then create larger holes to insert wall anchors. Secure the 1x2 wood pieces to the wall using screws, driving into studs where possible and using wall anchors for drywall sections. Repeat this process for all shelf support locations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WugV5jDKTcg</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12463-3</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aHmFvTbG69E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wood Shelves — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Determine the desired heights for the new shelves. Use a tape measure and pencil to mark the lines where the wooden cleats (support pieces) will be installed. For each shelf, install two cleats on the side walls to support the shelf&apos;s ends. Use a power drill to securely attach the wooden cleats to the wall studs or use appropriate wall anchors if studs are not accessible. Once the cleats are in place, slide the pre-cut wooden shelves into position on top of the supports.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aHmFvTbG69E</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12464-1</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6T7pSGY5fPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Finish Shelf Boards — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>With all ledger boards installed, cut 1x12 lumber (or desired shelf material) to the appropriate lengths for each shelf. The presenter suggests cutting them a &apos;hair&apos; short to allow for easier fitting and prevent damage to the walls during installation. Place each shelf board securely onto its corresponding ledger boards. Use a drill and self-tapping screws to secure the shelf boards from the top down into the ledger boards below. For corner shelves, where two boards meet, use a single screw driven at an angle (toe-nailing) through the edge of one shelf board into the adjacent shelf board to create a seamless and stable corner. After installation, use an orbital sander to smooth any rough edges or surfaces of the shelves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6T7pSGY5fPw</video:player_loc>
      <video:duration>85</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12464-2</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pACetP4h4A8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Install Wooden Shelves — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Acquire large wooden panels, such as plywood or MDF sheets, for the shelves. Using a circular saw equipped with a saw guide for straight cuts, precisely cut these panels to the exact depth and width required to fit snugly onto the installed wooden supports. Once cut, carefully place each shelf onto its respective supports. Secure the shelves in place using a nail gun or by screwing them into the wooden supports from above, ensuring stability and preventing movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pACetP4h4A8</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12464-3</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ziPhH5-dyEw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install All Shelves — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>After cutting, test fitting, and notching all shelves as needed, it&apos;s time for final installation. For added strength and to prevent warping, glue the shelves to the ledger boards using a strong construction adhesive like Loctite PL3X. Apply a bead of adhesive along the top edge of the ledger boards and the vertical supports. Carefully slide each shelf into place, ensuring a snug fit against the wall and supports. Once positioned, use a drill to secure the shelves to the ledger boards and vertical supports with screws, pre-drilling and countersinking as necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ziPhH5-dyEw</video:player_loc>
      <video:duration>363</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12465-1</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M_tMn6Yd4Mk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Pull-Down Shelf Organizer Hardware — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Carefully unpack the pull-down shelf organizer and lay out all components. Consult the manufacturer&apos;s installation manual for precise instructions, as mounting methods can vary between brands. Generally, the main frame of the organizer will attach to the inside walls or the top panel (ceiling) of the cabinet. Use a pencil and the provided template (if any) or the organizer itself to mark the exact locations for the mounting screws. It&apos;s crucial to use a level to ensure the unit is installed straight and plumb. Drill pilot holes into the cabinet material at the marked locations to prevent wood splitting. Then, use a screwdriver or drill/driver to firmly attach the organizer&apos;s frame to the cabinet. Ensure all screws are tight and the frame is stable. The video shows the finished organizer frame securely attached inside the cabinet before items are placed on it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M_tMn6Yd4Mk</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12465-2</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VP8RRhdwJgs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Customize Internal Storage — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>After the pantry cabinet is securely installed, the final step involves customizing its interior to maximize storage efficiency and functionality, as suggested by the video&apos;s emphasis on &quot;extra space of shelves&quot; and the mention of a &quot;pull-out trash&quot; system. Install adjustable shelves at various heights according to your specific storage needs. Most cabinet systems come with pre-drilled holes and shelf pins for easy adjustment. If you opted for a pull-out trash system, follow its specific installation instructions, which usually involve mounting drawer slides to the cabinet interior and attaching the trash bin frame. This transforms the raw cabinet space into a highly organized and practical storage solution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VP8RRhdwJgs</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12465-3</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6Wscn-iflSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Main Support Framework — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Identify the mounting points for the main support framework or slide rails of the pull-out organizer. These are typically attached to the underside of the upper cabinet, ensuring they are level and properly spaced. Use appropriate screws (wood screws for typical cabinet materials) to secure the framework. For a highly integrated unit, this step might involve constructing or installing a dedicated housing that will contain the pull-out shelves and face panel. Ensure the framework is robust enough to support the weight of the organizer when fully loaded with spices.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6Wscn-iflSI</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12466-1</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C8rpRAw3Je0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Touches and Cleanup — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>With the construction complete, apply any final coats of paint or stain to ensure a seamless finish. Install baseboards, crown molding, or other trim to integrate the pantry into the room&apos;s design. Thoroughly clean the entire area, removing all dust, debris, and tools. Organize the pantry interior with your dry goods, containers, and labels. Step back and admire your new, discreet storage solution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C8rpRAw3Je0</video:player_loc>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12466-2</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pXSXo0f7So8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Clean and Reveal — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>Do a final quick vacuum of the pantry floor to pick up any last bits of dust or debris. This ensures the entire area is perfectly clean and tidy. The final step is to showcase the completed pantry makeover, highlighting the improved organization, clear categorization, and fresh appearance. Emphasize how the new system provides better visibility and accessibility for all dry goods and pantry items.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pXSXo0f7So8</video:player_loc>
      <video:duration>210</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12466-3</loc>
    <lastmod>2026-11-13T23:55:33.205Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vZI00vOUqH8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Review and Organize Pantry — How to Turn an Under-Stair Closet into a Pantry</video:title>
      <video:description>With all the shelves securely installed, the pantry transformation is complete. This final step involves a quick cleanup of any remaining sawdust or debris from the construction. The newly built pantry is then ready to be organized with food items, kitchen supplies, or other household goods, making it a functional and aesthetically pleasing storage space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vZI00vOUqH8</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:55:33.205Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12452-1</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-WqYll1v-po/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Dry the Scratched Area — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>The first practical step is to thoroughly clean the scratched area on the hardwood floor. Use a damp rag to wipe away any dirt, dust, or debris that might be in or around the scratch. After cleaning, ensure the area is completely dry. This crucial preparation step guarantees that the repair products adhere properly and that the final finish is smooth and even.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-WqYll1v-po</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12452-2</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_hDZnBbstTY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Scratched Hardwood Surface — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>Using a clean, soft microfiber cloth, gently wipe down the entire scratched area and its surroundings. For stubborn grime, lightly dampen the cloth with a hardwood-safe cleaner, ensuring the surface is dry before proceeding to the next step. This prepares the surface for effective scratch removal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_hDZnBbstTY</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12452-3</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tJOoUC_rQyI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Clean the Floor — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>Employ a vacuum cleaner equipped with a hard floor attachment or a soft brush attachment to meticulously vacuum the entire hardwood floor. Pay close attention to corners, edges, and areas around baseboards where dust and debris tend to accumulate. This step is crucial for picking up loose particles before wet cleaning, preventing them from being smeared across the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tJOoUC_rQyI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12453-1</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dzhqXbFzd2s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Scratch Depth — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>Before proceeding, it&apos;s crucial to identify the depth of the scratches. Clear coat scratches, which affect only the outermost protective layer of paint, are generally repairable with polishing. Scratches that have gone through the clear coat and into the base coat (the color layer) or deeper are not fixable with this method and would require repainting. To test the scratch depth, run your fingernail across the scratch. If your fingernail barely catches or doesn&apos;t catch at all, it&apos;s likely a clear coat scratch. If your fingernail deeply catches, indicating a significant indentation, it&apos;s likely a deeper scratch that cannot be fully removed by polishing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dzhqXbFzd2s</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12453-2</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eY2O621zIVc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Scratch Depth and Gather Tools — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>The presenter emphasizes the importance of checking the depth of the scratch by running a fingernail over it. If the fingernail does not catch in the scratch, it typically indicates that the damage is superficial and can be fixed with compounding. If paint is missing or the scratch is deep, a different repair method (like touch-up paint) would be required. The specific products for this repair are introduced: Turtle Wax Clean Cut Rubbing Compound and a cordless drill equipped with a small foam polishing pad. It&apos;s noted that various polishing pads are available and can be purchased as a set for a reasonable price. The area to be worked on should be clean and free of dirt or mud to prevent further scratching.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eY2O621zIVc</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12454-1</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J7ql9-tOpoU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Heavy Scuffs with a Soft Cloth — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>For individual or heavy scuff marks, take a soft cloth and either spray the hardwood floor cleaning solution directly onto the cloth or directly onto the scuffed area of the floor. Once the area is dampened with the solution, use the soft cloth to buff the scuff away using circular motions. Continue buffing until the scuff mark is fully removed from the floor&apos;s surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J7ql9-tOpoU</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12454-2</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vCGaUnaXOJ0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rub Light Scuffs with Dry Rag — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>Identify the scuff mark on your hardwood floor. Take a clean, dry terry cloth rag and fold it to create a firm surface. Place your finger inside the folded rag to apply direct pressure. Rub the scuff mark vigorously with the dry rag, using either a back-and-forth or circular motion, until the mark begins to disappear. This dry friction method is often effective for fresh or less embedded scuffs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vCGaUnaXOJ0</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12454-3</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J7ql9-tOpoU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Large Scuffed Areas with a Shammy Mop — How to Hide Scratches in Hardwood Floors Without Sandi</video:title>
      <video:description>If you have a larger area of the floor with multiple scuffs or general surface dirt, a shammy mop can be used. Spray the recommended hardwood floor cleaning solution onto the shammy mop pad or directly onto the floor in the affected area. Then, use the shammy mop to clean and buff the area. The mop&apos;s action will help remove residual dust and effectively buff away scuffs, leaving the hardwood floors with a nice, fresh, and clean look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J7ql9-tOpoU</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12455-1</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nAi1h80YSCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Color and Apply Repair Crayon — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>From your hardwood floor repair kit, carefully select the repair crayon that most closely matches the color and grain of your floor. It is important to pick a shade that blends well to ensure an inconspicuous repair. Once the correct color is chosen, apply a small amount of the repair crayon directly into the scuffed area. Gently rub the crayon back and forth to fill the scratch or indentation with the colored wax.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nAi1h80YSCw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12455-2</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_guxUHS8Ekg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Furniture Crayon to Fill Scratches — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>Once you have selected the correct shade of furniture crayon, gently rub the tip of the crayon directly across the scratch or minor dent on the wood surface. Apply light pressure, allowing the waxy material to effectively fill the void. Continue rubbing until the scratch is adequately filled and the crayon&apos;s color is blended seamlessly into the surrounding wood grain. After application, it can be beneficial to lightly buff the area with a soft, lint-free cloth to remove any excess wax and smooth out the repair, ensuring it is less noticeable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_guxUHS8Ekg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12455-3</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KVi1B8SoK6Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Flooring Wax Stick — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>Select a flooring crayon or wax stick that closely matches the predominant color of your flooring. Once selected, use a sharp edge (like a utility knife or the edge of the crayon wrapper, if suitable) to scrape off a small amount of the wax from the stick. Carefully rub this scraped wax directly into the scratch, ensuring that the scratch is completely filled and the wax is pressed firmly into the damaged area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KVi1B8SoK6Y</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12456-1</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-WqYll1v-po/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Lighter Wood Repair Marker — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>For scratches that primarily involve a loss of color rather than deep physical damage, use wood repair markers. Start by applying a lighter shade marker directly into the scratch. Gently fill the void, being careful not to extend too far onto the undamaged wood, as this can make the repair more obvious. If you accidentally apply too much product to the surrounding area, immediately blot it off with a clean rag while it&apos;s still wet to remove any excess.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-WqYll1v-po</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12456-2</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MqP_mJgG5hY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Wood Finish Stain Marker — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>As a last resort for stubborn scratches, use a wood finish stain marker. First, identify an inconspicuous area on your floor to test the stain marker color to ensure it matches your wood. Once you have the correct color, dab the marker directly into the scratches on the wood floor. Immediately after dabbing, use a clean rag to quickly buff off any excess stain marker from the surrounding surface to prevent dark spots and ensure it blends seamlessly with the existing finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MqP_mJgG5hY</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12456-3</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/baX7CiOgTPE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stain Pen to Scratch — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>The next step is to obtain a stain marker or furniture pen. The presenter instructs viewers to visit a local home improvement store, specifically the paint section, to find these. He explains that these pens come in an array of different colors, and the goal is to match the color on the side of the pen&apos;s box as closely as possible to the floor&apos;s color. He reassures that an exact match is not critical. Once a suitable pen is selected, gently apply the stain directly to the scratch, allowing it to fill the exposed bare wood.</video:description>
      <video:player_loc>https://www.youtube.com/embed/baX7CiOgTPE</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12457-1</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nAi1h80YSCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Color and Apply Repair Crayon — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>From your hardwood floor repair kit, carefully select the repair crayon that most closely matches the color and grain of your floor. It is important to pick a shade that blends well to ensure an inconspicuous repair. Once the correct color is chosen, apply a small amount of the repair crayon directly into the scuffed area. Gently rub the crayon back and forth to fill the scratch or indentation with the colored wax.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nAi1h80YSCw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12457-2</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FTZabYykmlw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Universal Repair Kit Method — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>The fourth method involves a Saman Universal Repair Kit, designed for hardwood, laminate, and LVT vinyl floors. The kit includes five colors (neutral, brown, burgundy, tan, black), a mixing jar, a tiny spoon, and a formula chart/recipe book. To use, consult the formula chart to mix the different colors to achieve the desired shade that matches your floor. Use the mixing jar and spoon for this. Apply the mixed putty-like substance directly into the gouge using a finger. The consistency is thinner than wood filler but thicker than stain, making it suitable for filling deeper imperfections. Note that one of the colors in the kit was dried out, indicating a potential quality control issue. After application, wipe away excess to only fill the scratch. This product functions as a filler once dry and hardened.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FTZabYykmlw</video:player_loc>
      <video:duration>149</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12457-3</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CTTTm4zT9uM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fix Large Scratches or Chips — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>For a large scratch or chip in the flooring, you&apos;ll likely need a stainable wood filler, a stain pen or stain matching your floor, some painter&apos;s tape, some wipe-on poly, a small painter&apos;s tool or putty knife, and a sanding sponge or sandpaper. Apply some painter&apos;s tape around the area you&apos;re fixing. Then, add the wood filler into the hole or scratch, attempting to keep it as smooth as possible. Once dry, lightly sand the area and attempt to feather the edges with the surrounding floor. Next, apply the stain to the patched area using either a foam brush or a rag. It&apos;s never a bad idea to test the look of the stain on the wood filler in an inconspicuous area or on a piece of scrap wood just to make sure it matches the floor when finished. Once the stain is dried, if your floor has a luster to it, apply a small amount of wipe-on poly to the area to help blend in the fixed area with the existing floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CTTTm4zT9uM</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12458-1</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-WqYll1v-po/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Top Coat and Blend — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>Although the scratch shown in the video might be minor enough to forgo this step, it is highly recommended to apply a protective finish, especially for larger repairs or if wood repair crayons/putty were used. Purchase a small container (pint size) of a waterborne finish, such as Minwax Polycrylic. Always opt for the lowest gloss level available (e.g., flat, matte, or satin) to achieve a more natural, less reflective finish that blends better with most hardwood floors. Use a small foam brush to dab a tiny amount of the finish directly over the area you just repaired. Immediately after applying, take a clean rag and gently blot the finish to help it spread evenly and blend into the surrounding wood without leaving a noticeable film. Allow the repair to cure for 24 hours before resuming normal use of the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-WqYll1v-po</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12458-2</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QofGVgMaGyA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Finish — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>After the color-matched area is completely dry, apply a clear wood sealant or topcoat over the repaired section. This step is crucial for protecting the repair from future wear, moisture, and stains, and it helps to integrate the repair seamlessly with the existing floor&apos;s finish. Select a sealant that matches the sheen (e.g., matte, satin, semi-gloss) of your wooden floor for the best results. Apply the sealant evenly using an applicator brush or foam pad, following the manufacturer&apos;s instructions for application and drying times.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QofGVgMaGyA</video:player_loc>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12458-3</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6XuObCS-pCc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Repair with Polyurethane — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>Once you are satisfied with the color match and the stained area is completely dry, it&apos;s time to protect the repair. Apply a polyurethane clear coat over the stained scratch. You can use an aerosol spray can for a light, even application, which can be convenient for small areas. Alternatively, you can use liquid polyurethane and apply it with a small brush. Make sure the sheen of your polyurethane (e.g., satin, semi-gloss, gloss) matches that of your existing hardwood floor finish for a consistent appearance. Apply a light, even coat to cover and seal the repaired area. This step protects the stained wood and helps it blend visually with the rest of the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6XuObCS-pCc</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12459-1</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4VnjNTmLTWU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Furniture Pads to Prevent Scratches — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>To proactively prevent scratches and damage to your wood floors, apply furniture pads to the bottom of all furniture items, especially those that are frequently moved or have heavy bases. These pads, typically made of felt, create a soft barrier between the furniture and the floor surface. Carefully lift each piece of furniture or tilt it to access the underside of its legs or base. Peel off the adhesive backing from the furniture pads and firmly press them onto the contact points. This simple addition will effectively protect your floors from being scratched or gouged by furniture movement, extending the life and pristine appearance of your wood surfaces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4VnjNTmLTWU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12459-2</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VZFeYQg4AeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prevent Future Scratches — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>To prevent future scratches, attach self-adhesive felt pads to the bottom of all furniture legs. These pads create a soft barrier between the furniture and your hardwood floors, allowing furniture to slide without causing damage. Alternatively, if you are remodeling or installing new floors, consider using scratch-resistant flooring, such as LifeProof vinyl plank flooring, which is designed to withstand daily wear and tear more effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VZFeYQg4AeQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12459-3</loc>
    <lastmod>2026-11-13T23:53:59.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mDeqHvsCabs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Protect Floors with Furniture Pads — How to Hide Scratches in Hardwood Floors Without Sanding</video:title>
      <video:description>A critical step in protecting laminate and other delicate floors from damage is to apply furniture pads to the bottom of all furniture legs. These soft, felt pads act as a protective barrier, preventing direct contact between hard furniture surfaces and your floors. This measure effectively safeguards against scratches, scuffs, and dents that can occur when furniture is moved or shifted. By proactively installing these pads, you ensure that your floors remain pristine, maintaining their quality and appearance for a longer period. This simple, non-toxic solution contributes to the longevity of your floors and reduces the need for costly repairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mDeqHvsCabs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:53:59.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12446-1</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3ytwopiFAkc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Excavating for the First Step — How to Build Stone Steps in a Garden</video:title>
      <video:description>Begin excavating the marked area to prepare for the first step. Use shovels (both long and short-handled) to dig out the soil. The goal is to dig down to a stable base, which in this case is a clay layer found at approximately 12 inches deep. Digging to this depth ensures a solid foundation and allows for adequate space for the gravel base and the granite step, promoting good drainage and preventing shifting over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3ytwopiFAkc</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12446-2</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3ytwopiFAkc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dig Trench for First Step — How to Build Stone Steps in a Garden</video:title>
      <video:description>Excavate the marked area to create a trench for the first step. The depth of the excavation should be at least 12 inches to allow for adequate gravel base and proper embedding of the granite step. While digging, clay soil is encountered, which is noted as a solid and desirable base for stability. Continue digging until the desired depth and a relatively flat, solid base is achieved.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3ytwopiFAkc</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12446-3</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nhf67pjqthA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing Natural Stone Steps — How to Build Stone Steps in a Garden</video:title>
      <video:description>Using heavy machinery like an excavator, carefully place the natural stone slabs to form the steps. After each large stone slab is placed, use hand tools such as rakes and shovels to distribute and level the clean crushed stone underneath and around the slab. A level is used to ensure each stone step is properly aligned and flat, creating a stable and even walking surface. The excavator is essential for moving the heavy stones into position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nhf67pjqthA</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12447-1</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I15PB8JoDuA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Compact Gravel Base — How to Build Stone Steps in a Garden</video:title>
      <video:description>Once the trench is excavated to the proper depth and soil type, introduce a layer of 3/4-inch crushed stone. Dump the stone into the trench, aiming for an initial layer of 4 to 5 inches. The key is to achieve 100% compaction of this layer to ensure stability and proper drainage for the stairs. While a hand tamper can be used for initial compaction, a jumping jack compactor is highly recommended for thorough compaction. The jumping jack&apos;s motor drives a piston, causing a plate to move up and down, effectively compacting the stone.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I15PB8JoDuA</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12447-2</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3ytwopiFAkc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add and Compact Gravel Base — How to Build Stone Steps in a Garden</video:title>
      <video:description>Add a layer of crushed stone (gravel) into the compacted trench. Use a wheelbarrow to transport the gravel and then a flat shovel to evenly spread it across the bottom of the trench. This layer serves two primary purposes: providing excellent drainage and forming a strong, stable foundation for the granite step. Compact this gravel layer thoroughly using the hand tamper to ensure it is dense and level. The expert explicitly states that the crushed stone will be twofold: for drainage and as a foundation, hence the need for compaction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3ytwopiFAkc</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12447-3</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3ytwopiFAkc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adding and Compacting Gravel Base — How to Build Stone Steps in a Garden</video:title>
      <video:description>Once the trench is excavated, a layer of crushed stone (gravel) is added. Pour the gravel from a wheelbarrow into the trench. Use a flat shovel to spread the gravel evenly across the bottom of the excavated area. Then, use a hand tamper to firmly compact the gravel. This step is crucial for two reasons: it provides excellent drainage to prevent water accumulation and potential ice formation, and it creates a solid, stable foundation for the granite step, minimizing movement and ensuring longevity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3ytwopiFAkc</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12448-1</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/roI1XjBB-xs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Paver Sand Bedding Layer — How to Build Stone Steps in a Garden</video:title>
      <video:description>Spread a layer of paver sand over the compacted gravel base. This layer acts as a bedding material, allowing for minor adjustments when placing the flagstones and providing a cushion. Use a rake or screed board to evenly distribute the sand and achieve a consistent depth and level surface. This step is critical for ensuring the flagstones sit uniformly and without wobbling. (Note: The video initially shows pavers being laid before this sand layer, and then corrects by adding sand underneath and in between later. For best practice, this bedding layer should be prepared *before* laying pavers).</video:description>
      <video:player_loc>https://www.youtube.com/embed/roI1XjBB-xs</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12448-2</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZJlzKb7nBzk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level Sand Bed &amp; Lay Stones — How to Build Stone Steps in a Garden</video:title>
      <video:description>After the gravel base is compacted, a layer of sand is added on top. The sand provides a cushion and allows for fine adjustments to the stone placement. A &apos;screet&apos; (a straight board) is then used, running across the previously set rails, to level the sand bed to a precise, even surface. This creates a consistent height for the stones. Once the sand bed is prepared, the &apos;tumbled&apos; bluestone pavers are carefully laid. The process begins from the edge that aligns with existing concrete, ensuring a seamless, flush transition with no tripping hazards. The irregular-shaped stones are fitted together like a puzzle, selecting pieces that minimize gaps without requiring cutting, as the tumbled stone is designed for this natural, informal look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZJlzKb7nBzk</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12448-3</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X0eIDk-v5nI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Screeding the Sand Setting Bed with Bars — How to Build Stone Steps in a Garden</video:title>
      <video:description>For the sand setting bed, precision is crucial. Begin by placing two parallel 1-inch thick screed bars (such as metal pipes or consistent wood strips) directly on the compacted gravel base. These bars serve as guides to ensure a uniform 1-inch depth for your sand layer. Next, use a long spirit level (a Stanley brand level is shown) or a sturdy straight edge that spans across the two screed bars. Drag the level across the sand, removing any high spots and filling in low areas. This action creates a perfectly flat and uniform sand bed. As you work, you will progressively move the screed bars to cover the entire paving area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X0eIDk-v5nI</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12449-1</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/02HWuH2dUMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place the First Tread with a Bullnose — How to Build Stone Steps in a Garden</video:title>
      <video:description>Once the first riser is firmly set and leveled, it is time to place the first tread. Select a piece of Tennessee flagstone, noting its inherent hardness and weight. Carefully position this flagstone onto the riser, ensuring that the front edge slightly overhangs the riser. This overhang creates a feature known as a &apos;bullnose,&apos; which is a comfortable recess between the top of the riser and the bottom of the tread, making the steps more ergonomic and pleasant for walking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/02HWuH2dUMM</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12449-2</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hsSbnEfYHak/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Natural Stone Steps — How to Build Stone Steps in a Garden</video:title>
      <video:description>With the base prepared, carefully position the large natural stone slabs to form the new steps. Each stone needs to be maneuvered into place, ensuring it is level from front to back and side to side, and at the correct height (rise) and depth (run) relative to the adjacent steps. This often requires minor adjustments by adding or removing gravel/sand beneath the stone. The video showcases the finished stone steps, demonstrating a sturdy and visually appealing transition up the incline, with each step comprised of substantial natural stone slabs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hsSbnEfYHak</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12449-3</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/woVcHZsvbbc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Black Hills Natural Stone Steps — How to Build Stone Steps in a Garden</video:title>
      <video:description>With the sub-base firmly prepared, proceed to carefully position the large &apos;Black Hills Natural Stone&apos; slabs to construct the individual steps. These natural stone pieces are specifically chosen for their aesthetic appeal and stated ease and speed of installation. Each stone slab must be meticulously leveled to ensure a safe and uniform rise and run for the entire staircase. Due to the substantial weight and size of these natural stone pieces, heavy lifting equipment, such as an excavator with specialized attachments or robust stone clamps and lifting straps, will likely be necessary to safely move and set them into their final positions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/woVcHZsvbbc</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12450-1</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/02HWuH2dUMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Build Subsequent Risers and Place Treads — How to Build Stone Steps in a Garden</video:title>
      <video:description>Proceed to build the remaining risers and place the subsequent treads. For these upper steps, use a single course of salvaged bricks for each riser. Since all the bricks are of a uniform thickness, each riser, built two bricks high, will naturally maintain the same consistent height, aligning with the critical planning principle. Carefully position each Tennessee flagstone tread onto its respective riser. Ensure that the back of each tread is securely seated on firm, solid ground, just as with the initial step. It&apos;s perfectly acceptable for the staircase to wind its way up the hill rather than going straight, as long as each step remains level and each riser is the same height. Remember that the inherent weight of the stones provides the necessary stability, eliminating the need for mortar.</video:description>
      <video:player_loc>https://www.youtube.com/embed/02HWuH2dUMM</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12450-2</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pF2Vit9AU78/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Construct Subsequent Tiers of Steps — How to Build Stone Steps in a Garden</video:title>
      <video:description>Continue building the stairs by progressively laying more natural stone blocks for each ascending step. For every new step, continuously use the string line and spirit level to ensure consistent rise (the vertical height of each step) and tread (the horizontal depth of each step). Use a tape measure to meticulously maintain uniform dimensions across all steps, creating a comfortable and safe ascent. Place each stone firmly, utilizing a hammer to adjust and settle it into its final position. The video shows workers frequently checking the level and alignment as they add each stone, often using the previous step as a reference point. Fill any significant gaps between and under the stones with mortar or a suitable bedding material to ensure stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pF2Vit9AU78</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12450-3</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I15PB8JoDuA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Filler Stones and Rebar — How to Build Stone Steps in a Garden</video:title>
      <video:description>With the first step in place, fill the space between the back of the step and the existing patio foundation with smaller granite &apos;cheek&apos; or filler stones. These stones provide crucial support and stability. To prevent the filler stones from shifting or kicking out, drive pieces of rebar vertically into the ground directly next to them, using a hammer. Continue to fill any remaining voids with crushed stone and compact as needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I15PB8JoDuA</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12451-1</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/O5OFrq3eIJo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Cleanup — How to Build Stone Steps in a Garden</video:title>
      <video:description>After filling all steps with gravel, perform a final inspection of the entire stairway. Check that all steps are stable, the gravel is evenly distributed, and there are no sharp edges or hazards. Clear any excess dirt, gravel, or debris from around the steps and the surrounding area using a rake or broom to complete the project and leave a tidy finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/O5OFrq3eIJo</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12451-2</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Y4hTEWVsFYE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Review and Final Touches — How to Build Stone Steps in a Garden</video:title>
      <video:description>After all steps and flagstone landing pads are complete, take a final walk along your newly installed stone steps. Observe the stability and appearance. The finished steps should provide a natural, neat, and much safer way to navigate your sloped yard, making it easier to access different areas. The natural look blends seamlessly with the environment, transforming a challenging slope into a functional and attractive pathway.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Y4hTEWVsFYE</video:player_loc>
      <video:duration>116</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12451-3</loc>
    <lastmod>2026-11-13T23:51:52.231Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iscAp1QEhi8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill, Finalize, and Cure — How to Build Stone Steps in a Garden</video:title>
      <video:description>After all the steps are built, use a shovel and your hands to carefully distribute the remaining gravel and excavated soil around the sides of the newly constructed steps. This helps to fill in gaps, provide additional stability, and create a smooth transition between the steps and the surrounding hillside. Compact the gravel and soil around the steps with a hand tamper to ensure everything is settled. The creator then walks up and down the completed steps to test their stability. He notes that the adhesive typically requires about seven days to fully cure before the steps can be considered completely solid.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iscAp1QEhi8</video:player_loc>
      <video:duration>126</video:duration>
      <video:publication_date>2026-11-13T23:51:52.231Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12435-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_Xhr5frUvzU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Excavate Base Material — How to Build Paver Steps into a Hill</video:title>
      <video:description>Using shovels, carefully remove all sod and underlying dirt from within the marked layout. The excavation depth should be approximately 8 inches (20 cm) to accommodate the paver base, leveling sand, and the pavers themselves. Ensure the bottom of the excavated area is relatively even.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_Xhr5frUvzU</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12435-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eETgKe5ieEs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Outlines and Excavate — How to Build Paver Steps into a Hill</video:title>
      <video:description>Once the pavers are in their desired preliminary positions, mark the outline of each paver directly onto the ground using spray paint. This creates a clear guide for excavation. After marking, temporarily move all the pavers out of the way. Then, using a shovel, excavate the soil within the marked outlines. The excavation depth should accommodate a gravel base (approximately 2 inches) and a thin layer of leveling sand (approximately 1/4 inch), plus the thickness of your chosen pavers (approximately 1 inch for this project). For these specific pavers, this would mean digging down about 3-4 inches. Be sure to remove any high spots or humps and fill in any divots within the excavated areas to create a relatively flat surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eETgKe5ieEs</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12435-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3ytwopiFAkc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Excavating for the First Step — How to Build Paver Steps into a Hill</video:title>
      <video:description>Begin excavating the marked area to prepare for the first step. Use shovels (both long and short-handled) to dig out the soil. The goal is to dig down to a stable base, which in this case is a clay layer found at approximately 12 inches deep. Digging to this depth ensures a solid foundation and allows for adequate space for the gravel base and the granite step, promoting good drainage and preventing shifting over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3ytwopiFAkc</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12436-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HhpjkIf2GXQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Edge Restraints and Ensure Drainage — How to Build Paver Steps into a Hill</video:title>
      <video:description>Install edge restraints around the excavated perimeter. These restraints, shown as wooden planks, are crucial for stabilizing the pavers and preventing them from settling or shifting over time. Secure the wooden planks by driving nails through them into the ground using a hammer. It&apos;s important to set the edges to allow for proper drainage, ensuring a slight slope of approximately 1/4 inch for every 12 feet, moving away from any adjacent structures. Use a spirit level to verify this slope and ensure water runoff is directed away from building foundations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HhpjkIf2GXQ</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12436-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tgBHgxvgWiM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Construct Retaining Edge — How to Build Paver Steps into a Hill</video:title>
      <video:description>To create a stable and level edge for the new paver path, and to prevent future soil erosion onto the pathway, install a small wooden retaining edge. Place two pieces of treated lumber horizontally, stacking them one on top of the other, against the edge of the newly excavated area. Secure these wooden planks by driving rebar stakes through them and deep into the ground using a hammer. Use a spirit level to carefully check that the top surface of the upper wooden plank is perfectly level. If it&apos;s not level, adjust by either digging out a small amount of soil or placing small rocks or shims underneath the lower plank until it achieves a level position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tgBHgxvgWiM</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12436-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i_cf3PWcVYk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Paver Edge Restraints — How to Build Paver Steps into a Hill</video:title>
      <video:description>Install paver edge restraints, often called &apos;lockers,&apos; along the perimeter of the area you plan to pave. These restraints are crucial for holding the pavers firmly in place and preventing them from shifting over time. Position the edge restraints snugly against the compacted base and secure them by driving landscape pins through the designated holes in the restraints into the ground. A hammer or rubber mallet can be used for this. The video also shows a helper using a paver as a &apos;jig&apos; to ensure a tight fit against the concrete, further enhancing stability. Proper installation of these restraints can eliminate the need for concrete on the edges, which is typically used for less stable installations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i_cf3PWcVYk</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12437-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aDDj9s4as8M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Build the Gravel Base — How to Build Paver Steps into a Hill</video:title>
      <video:description>After compacting the soil, pour a layer of crushed gravel, such as Paverstone Patio/Paver Base, at least 2 to 3 inches thick over the entire compacted ground. Use a metal rake to spread the gravel around evenly. Once spread, wet down the gravel thoroughly with a garden hose and then compress it again using the hand tamper. Add more crushed gravel as needed, repeating the wetting and compacting process until the gravel base is slightly below grade, forming a stable foundation for the pavers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aDDj9s4as8M</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12437-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_0AdTYW65PA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Paver Base and Initial Compaction — How to Build Paver Steps into a Hill</video:title>
      <video:description>Transport paver base gravel (typically 3/4 inch minus crushed stone) to the excavated area using a wheelbarrow. Spread the gravel evenly across the entire surface, aiming for a consistent depth (usually 4-6 inches). Use a rake and a long level or screed board to achieve the desired slope for drainage, ensuring the surface is as flat as possible. Once spread and roughly leveled, use a plate compactor to thoroughly compact the paver base. Make several passes in different directions to ensure maximum compaction. The base should be firm and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_0AdTYW65PA</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12437-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rlZ8rAs0rcM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Compact the Gravel Base — How to Build Paver Steps into a Hill</video:title>
      <video:description>Once the first 3-inch layer of gravel is evenly spread, use a vibratory plate compactor to compact it thoroughly. Run the compactor over the entire surface multiple times, making overlapping passes to ensure every part of the base is dense and firm. The goal is to make the base as hard as rock, which will prevent future settling and shifting of the pavers. If necessary, lightly mist the gravel with water before compacting to aid in consolidation, especially in very dry conditions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rlZ8rAs0rcM</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12438-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xgBwbLsjTzE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Sand Bedding — How to Build Paver Steps into a Hill</video:title>
      <video:description>Spread a uniform layer of bedding sand (often concrete sand or screed sand) over the compacted granular base. This layer should be approximately 1 inch thick and serves as a cushion for the pavers, allowing for slight adjustments and proper seating. Use a screed board and guide rails (e.g., PVC pipes or metal conduits) to ensure the sand is perfectly level and at the correct height, maintaining the proper slope for drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xgBwbLsjTzE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12438-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HbxuAo3rqMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Sand Bedding Layer — How to Build Paver Steps into a Hill</video:title>
      <video:description>After the base is thoroughly compacted, spread a 1-inch layer of coarse sand evenly over the entire surface. This sand layer serves as a bedding material for the pavers, allowing for minor adjustments to ensure each paver sits level and tightly against its neighbors. Use screed boards or a long, straight piece of lumber to level the sand accurately.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HbxuAo3rqMM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12438-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HhpjkIf2GXQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Spread and Screed the Paver Sand Bed — How to Build Paver Steps into a Hill</video:title>
      <video:description>Next, spread 1 to 2 inches of Quikrete Patio Paver Base Sand evenly over the compacted gravel base. This layer serves as the crucial leveling bed for the pavers. To ensure a consistent depth, construct a screed: attach a 1x1 piece of lumber to the bottom edge of a 2x4, positioning it so the 1x1 extends below the 2x4 by the exact thickness desired for your paver sand layer (e.g., 1 to 2 inches). Drag this custom screed across the sand, removing any excess sand in front and adding more behind as necessary. This process will require several passes to achieve a perfectly smooth and level surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HhpjkIf2GXQ</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12439-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PstC89O0EP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay the First Row of Pavers — How to Build Paver Steps into a Hill</video:title>
      <video:description>Begin laying your pavers down in your desired pattern, following the established string line. Place each paver firmly into the prepared sand bed. Use a rubber mallet to gently tap each paver, ensuring it is properly seated and level. Maintain a small gap of approximately 3mm (about 1/8 inch) between each paver to allow for jointing sand later on. Some pavers may feature built-in &apos;nibs&apos; on their sides to help achieve this consistent gap. As you lay, regularly check that your first row remains straight by using the string line as a guide. Depending on your layout and the area&apos;s dimensions, you may need to measure and cut the first paver in a row to fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PstC89O0EP8</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12439-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vuNI3gmAr_Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place and Set Paver — How to Build Paver Steps into a Hill</video:title>
      <video:description>Once the sand base is prepared and leveled, carefully place the paver onto the sand bed. Center it within the excavated area. Use a rubber mallet to gently tap the paver across its surface, working from the center outwards. This action helps to settle the paver firmly into the sand, creating a stable and even surface. Avoid hitting the paver too hard, as this can cause it to sink too much or crack. Check the level again if necessary after setting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vuNI3gmAr_Y</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12439-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_Xhr5frUvzU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Pavers — How to Build Paver Steps into a Hill</video:title>
      <video:description>Begin laying the pavers directly onto the leveled sand bed. Start from the edge closest to the house or a permanent structure, working your way outwards. Place each paver gently into position, avoiding dragging or disturbing the sand. Maintain consistent spacing between pavers. Use a rubber mallet to gently tap each paver into place, ensuring it is level with its neighbors. Periodically check for levelness and adjust as needed. Try to work from a kneeling board to avoid disturbing the leveled sand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_Xhr5frUvzU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12440-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HhpjkIf2GXQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay and Level the Pavers — How to Build Paver Steps into a Hill</video:title>
      <video:description>With the sand base perfectly level, begin laying the pavers. Start in a corner and work your way outwards to avoid disturbing the prepared sand bed. To ensure straight rows and consistent alignment, use stakes and a string line, or a long straightedge, as a guide. Maintain a consistent joint width between each paver. As each paver is placed, gently tap it into position using a rubber mallet to seat it firmly into the sand. Throughout the laying process, frequently check the pavers with a spirit level to ensure they are square and perfectly level. This regular checking is vital for a smooth and even finished surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HhpjkIf2GXQ</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12440-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PstC89O0EP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay the First Row of Pavers — How to Build Paver Steps into a Hill</video:title>
      <video:description>Begin laying your pavers down in your desired pattern, following the established string line. Place each paver firmly into the prepared sand bed. Use a rubber mallet to gently tap each paver, ensuring it is properly seated and level. Maintain a small gap of approximately 3mm (about 1/8 inch) between each paver to allow for jointing sand later on. Some pavers may feature built-in &apos;nibs&apos; on their sides to help achieve this consistent gap. As you lay, regularly check that your first row remains straight by using the string line as a guide. Depending on your layout and the area&apos;s dimensions, you may need to measure and cut the first paver in a row to fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PstC89O0EP8</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12440-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GIwtGWxF-IM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Second Row of Pavers and Beyond — How to Build Paver Steps into a Hill</video:title>
      <video:description>For the second row, establish a new string line that drops an inch and a half from the first row to ensure water runs off the patio. Use this lower string line as your guide for setting the new row of pavers. To create a strong, staggered pattern that breaks the bond of the previous row and improves stability (e.g., a running bond pattern), start with a 2x3 foot paver if the first row began with an 18x24 inch paver. This offset prevents continuous seams, which can be weak points. Continue laying pavers, following the established grade and pattern, until the entire patio area is covered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GIwtGWxF-IM</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12441-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GgUDZ6Supmo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Pavers for Edge Details — How to Build Paver Steps into a Hill</video:title>
      <video:description>As you approach the edges of the patio, or any features like the fire pit, steps, or pathways, you will need to cut pavers to fit. Measure each section accurately and mark the pavers. Use a wet saw, which is ideal for cutting concrete or stone pavers, to make precise cuts. Always wear appropriate safety gear (safety glasses, hearing protection, gloves) when operating a wet saw. The video clearly shows the use of a wet saw for cutting various paver shapes, highlighting the importance of precise cuts for a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GgUDZ6Supmo</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12441-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tsJ6onQmOVw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Edge Pavers and Cure — How to Build Paver Steps into a Hill</video:title>
      <video:description>For areas where full pavers don&apos;t fit, such as around the edges, walls, or steps, you will need to cut the pavers to size. Measure the required dimensions, mark the pavers, and use a wet saw or angle grinder with a diamond blade for precise and clean cuts. Carefully place the cut pavers into position. Once all pavers, including the cut pieces, are laid and glued, allow the adhesive to fully cure according to manufacturer specifications, typically 24-48 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tsJ6onQmOVw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12441-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XXZNqG9CeUA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Custom Paver Cutting — How to Build Paver Steps into a Hill</video:title>
      <video:description>For areas requiring custom paver shapes, such as around downspouts, drain covers, or at the end of the pathway, use a masonry saw equipped with a diamond blade to make precise cuts. Mark the desired cut lines on the pavers with a pencil. When cutting, hold the paver firmly and carefully guide the saw along the marked line, applying water to reduce dust and cool the blade. After cutting, lightly run the blade along the cut edge to &apos;factory&apos; the edge, softening any sharp, freshly cut lines to match the original paver finish. This attention to detail creates a professional and seamless appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XXZNqG9CeUA</video:player_loc>
      <video:duration>148</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12442-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aDDj9s4as8M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Step Treads and Continue Pavers — How to Build Paver Steps into a Hill</video:title>
      <video:description>For the step treads, select blocks that are the same thickness as your regular pavers. These tread blocks are then attached directly to the top of the previously laid wall blocks using construction adhesive. After securing the step treads, continue laying your pavers in the same running bond pattern across the newly prepared section of the walkway until you reach the point where another step is required.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aDDj9s4as8M</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12442-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e5TERrSFC7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Step Treads with Adhesive — How to Build Paver Steps into a Hill</video:title>
      <video:description>Apply a strong, outdoor-grade construction adhesive (e.g., a landscape block adhesive from a caulk gun) to the underside of each step tread before final placement. This adhesive will permanently secure the treads to the riser blocks, preventing shifting, wobbling, or dislodgement over time due to heavy use or weather conditions. After applying the adhesive, firmly press each tread into place. Continue working your way up the staircase until all treads are securely fastened. Allow adequate curing time as specified by the adhesive manufacturer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e5TERrSFC7Q</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12442-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_7sKEOsih7I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Pavers for Treads and Landing — How to Build Paver Steps into a Hill</video:title>
      <video:description>Once the step risers and planter walls are built, proceed to install the flat paver stones for the step treads and the main landing area. The video specifically mentions &quot;Unilock Copthorne&quot; pavers for the walk-out section, suggesting a brick-like aesthetic, likely combined with larger, flat paver units (possibly Rivercrest caps or specialized step treads) for the actual walking surfaces of the steps. Lay these pavers tightly on the prepared bedding sand (for the landing) or on top of the block risers (for treads), ensuring they are level and have a consistent joint spacing. Use a rubber mallet to seat each paver firmly. Make any necessary cuts to fit around edges, posts, or the house using a paver cutter or concrete saw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_7sKEOsih7I</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12443-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oq3c7ZaZacA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sweep in Joint Sand — How to Build Paver Steps into a Hill</video:title>
      <video:description>With all the field pavers laid and cuts made, it&apos;s time to sweep in the joint sand. Begin by emptying bags of polymeric sand onto the surface of the pavers. Use a push broom to vigorously sweep the sand back and forth, ensuring that it completely fills all the gaps and joints between the pavers. Once the joints are filled, gently sweep any excess sand from the surface. Then, use a leaf blower to thoroughly remove any remaining fine sand dust from the paver faces. Finally, lightly mist the entire paved area with a hose to activate the polymeric sand. The water will cause the polymers in the sand to bind together, hardening and locking the pavers in place, preventing weed growth and insect infestation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oq3c7ZaZacA</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12443-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y9kxUFEh-WY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Brush in Jointing Sand — How to Build Paver Steps into a Hill</video:title>
      <video:description>Once all pavers are laid, spread fine, kiln-dried sand (also known as jointing sand) evenly over the entire paved surface. Using a stiff brush, sweep the sand back and forth, working it into all the gaps and joints between the pavers. Make several passes to ensure the joints are completely filled. This sand locks the pavers in place, prevents movement, and helps distribute loads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y9kxUFEh-WY</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12443-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vLUHVeChEu4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sweep in Polymeric Sand — How to Build Paver Steps into a Hill</video:title>
      <video:description>Once all pavers are laid, sweep polymeric sand across the surface, ensuring it fills all the narrow joints between the pavers. The video highlights that due to the tight spacing, some sand may initially only sit at the very top of the joints, leaving dead space at the bottom.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vLUHVeChEu4</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12444-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mFyA4KoBQ18/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Compact Pavers — How to Build Paver Steps into a Hill</video:title>
      <video:description>With all pavers laid and restrained, it&apos;s time to interlock them securely using a plate compactor. Start the compactor and drive it directly over the entire paver surface. You&apos;ll want to compact your pavers firmly into the sand base. This process will help smooth out the surface and ensure all pavers are properly seated. Make sure to go over every paver several times to achieve optimal compaction and a stable, even patio.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mFyA4KoBQ18</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12444-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QJQsp0WzIyk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Compact Paver Surface — How to Build Paver Steps into a Hill</video:title>
      <video:description>After all the pavers for both the path and the circular patio are laid and all edging is secured, it&apos;s crucial to compact the entire paver surface. Attach a protective rubber mat to the bottom plate of the plate compactor. This mat is essential to prevent any chipping, scratching, or damage to the paver surfaces during compaction. Operate the plate compactor over the entire paved area, making several overlapping passes. The vibration from the compactor will cause the pavers to settle evenly into the uncompacted sand bed, firmly seating them and pushing the sand up into the joints between them. Work systematically and slowly to achieve uniform settlement and a stable paver surface across both patio areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QJQsp0WzIyk</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12444-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/neTbz1vcOD8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Compact the Pavers — How to Build Paver Steps into a Hill</video:title>
      <video:description>Once all pavers are laid, use a plate compactor to firmly press them into the sand bed. Run the compactor over the entire paver surface multiple times, working in different directions. This process ensures the pavers are stable, level with each other, and firmly seated, creating a durable and even patio surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/neTbz1vcOD8</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12445-1</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/neTbz1vcOD8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Activate Polymeric Sand — How to Build Paver Steps into a Hill</video:title>
      <video:description>After all the polymeric sand has been swept and tamped into the joints, remove any remaining loose sand from the paver surface using a broom. It&apos;s crucial that no sand is left on top of the pavers before the next step. Then, lightly mist the entire patio area with water from a hose, being careful not to wash away the sand from the joints. The water activates the polymers in the sand, causing it to harden and lock the pavers together, creating a durable and weed-resistant surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/neTbz1vcOD8</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12445-2</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LTDEZO-rWGg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sweep in Polymeric Sand — How to Build Paver Steps into a Hill</video:title>
      <video:description>After compaction, spread polymeric sand evenly over the entire paver surface. Use a push broom to sweep the polymeric sand into all the joints between the pavers, ensuring each joint is completely filled. Remove any excess sand from the paver surfaces, as residual sand can leave a haze. Once the sand is properly distributed, gently mist the entire paver area with water according to the polymeric sand manufacturer&apos;s instructions. This activates the polymers, creating a durable, flexible, and weed-resistant joint that helps lock the pavers in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LTDEZO-rWGg</video:player_loc>
      <video:duration>97</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12445-3</loc>
    <lastmod>2026-11-13T23:48:21.804Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LjL6xxZYSNU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalize Paver Surface and Joints — How to Build Paver Steps into a Hill</video:title>
      <video:description>Once all pavers are laid, clean the surface thoroughly to remove any loose debris or sand. Spread polymeric sand evenly over the entire paver surface. Use a push broom to sweep the polymeric sand into all the paver joints, ensuring they are completely filled. After sweeping, use a plate compactor over the entire paver area. This action vibrates the pavers, helping the polymeric sand settle deeply into the joints and locking the pavers together. After compaction, lightly mist the surface with water according to the polymeric sand manufacturer&apos;s instructions to activate its bonding properties, then allow it to cure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LjL6xxZYSNU</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-13T23:48:21.804Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12426-1</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Fdbs6xmS52A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off The Power — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Locate your home&apos;s main electrical service panel, typically found in a basement, utility room, or garage. Open the panel cover. Identify the circuit breaker that controls the light fixture you intend to replace. If not clearly labeled, you may need to flip breakers one by one or test with a lamp plugged into an outlet on the same circuit to find the correct one. Once identified, firmly switch the breaker to the &apos;OFF&apos; position to cut power to the fixture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Fdbs6xmS52A</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12426-2</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QPv24R7Fc9I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power and Verify — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Before starting any electrical work, identify the correct circuit breaker for the light fixture in your electrical panel. Flip the breaker to the &apos;off&apos; position. Use a non-contact voltage tester (e.g., Fluke) to verify that there is no power at the existing light fixture&apos;s wires to ensure safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QPv24R7Fc9I</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12426-3</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fKI5wOwHc2Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Locate the main electrical panel (circuit breaker panel or fuse box) in your home. Identify the specific circuit breaker that controls the light fixture you intend to replace. Flip this breaker to the &quot;OFF&quot; position to cut power to the fixture. To double-check that the power is indeed off, return to the light switch and flip it on and off. The light should not turn on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fKI5wOwHc2Y</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12427-1</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Fdbs6xmS52A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove The Old Fixture — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Begin by removing any decorative glass shades or covers from the old fixture to prevent accidental breakage. Unscrew the light bulbs. Use a screwdriver to detach the fixture&apos;s base or canopy from the ceiling electrical box. Once loose, carefully lower the fixture to expose the electrical wiring. Before touching any wires, use a non-contact voltage tester to confirm that the power is indeed off at the wires inside the electrical box. Disconnect the wires by untwisting the wire nuts: usually black (hot), white (neutral), and a bare copper or green wire (ground). Finally, remove the old mounting bracket from the electrical box. Inspect the ceiling area; if the old fixture left unpainted patches or damaged plaster, you may need to do some touch-up painting before installing the new fixture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Fdbs6xmS52A</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12427-2</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7HdftVml640/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Light Fixture — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>With the power safely turned off, proceed to remove the old light fixture. First, twist and remove any decorative nuts (finials) that secure the glass shade or cover to the fixture&apos;s base. Carefully remove the glass shade and set it aside. Next, unscrew the main canopy or base of the fixture from the ceiling junction box. This usually involves removing two screws that hold the fixture&apos;s mounting bracket to the junction box. Once these screws are removed, the entire fixture assembly will hang by its wires. You may then need to unscrew the fixture&apos;s mounting bar from the junction box, which often has a central screw or two smaller screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7HdftVml640</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12427-3</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BASrkcmH8YE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove existing light fixture — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>With the power confirmed off, proceed to remove the existing light fixture. For the fixture shown, this involves unscrewing a decorative ball or finial at the bottom of the glass dome. Carefully remove the glass dome to prevent it from falling and breaking. Then, unscrew any light bulbs from their sockets. Locate and loosen the mounting screws that hold the fixture&apos;s base to the ceiling electrical box. Once loosened, the fixture should come down, revealing the electrical wiring. Disconnect the wires by unscrewing the wire nuts from the black (hot), white (neutral), and bare copper (ground) wires. This allows for the complete removal of the old fixture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BASrkcmH8YE</video:player_loc>
      <video:duration>126</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12428-1</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QBZhVcClylI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Fan-Rated Junction Box — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>With the structural blocking firmly in place, it&apos;s time to mount the electrical junction box. For ceiling fans or heavy light fixtures like chandeliers, it is imperative to use a specialized &apos;fan-rated&apos; or &apos;heavy-duty&apos; electrical junction box. These boxes are designed with internal reinforcements and stronger mounting capabilities to safely support the significant weight and potential vibration of such fixtures. Position the selected fan-rated junction box in the center of the installed wood blocking, ensuring its front edge will be flush with the future finished ceiling surface (e.g., drywall). Use a cordless drill/driver to securely screw the junction box to the wood blocking, utilizing all available mounting points on the box. Verify that the box is stable, level, and firmly attached to the blocking, capable of supporting the intended fixture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QBZhVcClylI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12428-2</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DUASDI5qegA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Ceiling Junction Box — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Locate the existing electrical junction box in the ceiling where the chandelier will be installed. The video recommends using a fan-rated box, even for a chandelier, because it&apos;s designed for heavier loads and provides more robust support. This also allows for easier future upgrades if a ceiling fan is desired. During the rough-in stage, a temporary screw might have been used to hold the box; this is not sufficient for the fixture&apos;s weight. The structural support comes from bolts that mount directly into the ceiling joist.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DUASDI5qegA</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12428-3</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aBlfbkrGGfA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Chandelier Installation Challenges — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>The presenter introduces the common problem homeowners face when upgrading to heavier chandeliers: the existing ceiling electrical box might not be rated to support the increased weight. He explains that traditional flush-mount light fixtures are often supported by basic boxes not designed for the stress of a heavy chandelier, necessitating a more robust support system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aBlfbkrGGfA</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12429-1</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j2YkZmnisHc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unpack and Assemble Chandelier Arms — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Begin by unpacking all the chandelier components from their packaging. Identify the glass arms, each with a pre-installed light bulb socket and wires, and the central base plate. Carefully feed the individual wires from each glass arm through the corresponding holes in the central base plate. Once the wires are through, secure each arm to the central base using the provided nuts. Repeat this process for all arms.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j2YkZmnisHc</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12429-2</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SCX-yPTDHW8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Fixture and Attach Chain — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Assemble the main body of the chandelier fixture according to the provided instructions. This often involves attaching arms, decorative elements, or other structural parts. Once the fixture body is assembled, attach the suspension chain to the chandelier&apos;s upper loop, preparing it for connection to the ceiling mount.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SCX-yPTDHW8</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12429-3</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eHya937u2vk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preliminary Chandelier Assembly — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>After unboxing, the next task is the preliminary assembly of the chandelier. This primarily involves attaching the multiple metal arms to the central body of the fixture. The presenter sits on the floor and carefully unpacks the arms, noting the integrated wiring. While initially expressing some confusion about the correct positioning and rotation of the arms, the assembly proceeds. This stage is crucial to prepare the chandelier for the final electrical installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eHya937u2vk</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12430-1</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RS0tyWNs20/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Mounting Bar and Canopy Plate — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Mount the new mounting bar (also known as a crossbar or strap) to the ceiling electrical box. This bar will provide a secure point from which to hang the chandelier. If your chandelier weighs over 50 pounds, you must use a joist safety brace, which is a heavier-duty mounting system that attaches directly to the ceiling joists to support the additional weight. Once the mounting bar is secure, position the chandelier canopy against the ceiling, feed the central screw through its center hole, and screw the decorative nut to hold the canopy temporarily in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RS0tyWNs20</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12430-2</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1XPavTcXiII/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Mounting Bracket — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Attach the mounting bracket to the ceiling electrical box. Note that screws for this attachment are typically not provided with the fixture and may need to be sourced separately if not already present in your electrical box. Once the bracket is secured, adjust the threaded studs on the mounting bracket to the correct length for your chandelier&apos;s canopy, ensuring they will protrude enough to secure the canopy later. Lock these studs in place with hex nuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1XPavTcXiII</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12430-3</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ipgcfp8Ig0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Mounting Bracket — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Attach the new mounting bracket provided with your Kichler fixture to the junction box on your ceiling. Use the screws included with the bracket to secure it firmly. Ensure the threaded nipple or stem for the chandelier&apos;s chain is pointing down and securely fastened to the bracket. This bracket will support the weight of your new chandelier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ipgcfp8Ig0c</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12431-1</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z64dasWOqdY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire and Mount the Chandelier — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>While holding the chandelier near the ceiling, connect the white wire from the chandelier to the white neutral wire from the ceiling using a wire nut. Twist them together securely. Then, connect the black wire from the chandelier to the black hot wire from the ceiling, again using a wire nut and twisting firmly. Ensure the ground wire from the chandelier is connected to the bare copper or green ground wire from the ceiling. After all connections are made, push any excess wiring neatly back into the ceiling junction box. Align the chandelier&apos;s decorative base cover with the mounting bracket on the ceiling and secure it by tightening the two small nuts provided, often by hand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z64dasWOqdY</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12431-2</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zP0R5ZGOm0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Wiring — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Once the chandelier is physically mounted, connect the electrical wiring. Twist the black supply wire from the ceiling with the fixture&apos;s hot side wire. Secure this connection using the provided wire caps. Repeat this process for the white wires, connecting them to the fixture&apos;s neutral wire. If a bare copper ground wire is present from the home&apos;s wiring, connect it to the fixture&apos;s ground wire. After all connections are made, gently push all the connected wiring neatly up into the electrical box. Finally, install the canopy (the decorative plate that covers the electrical box) using the provided screws to complete the wiring enclosure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zP0R5ZGOm0g</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12431-3</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RS0tyWNs20/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Make Electrical Connections — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Using wire strippers, carefully strip about 1/2 inch of insulation from the ends of the chandelier&apos;s electrical wires. Then, connect the chandelier&apos;s wires to the corresponding wires in the ceiling junction box using twist-on connectors. Typically, you will connect the black wire from the chandelier to the black wire from the ceiling (hot to hot), the white wire from the chandelier to the white wire from the ceiling (neutral to neutral), and the bare copper or green ground wire from the chandelier to the copper ground wire from the ceiling. Ensure all connections are tight and secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RS0tyWNs20</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12432-1</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oGWYiofD5No/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Chandelier Canopy — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Carefully push all connected electrical wires and wire nuts up into the ceiling electrical box, ensuring no wires are pinched or exposed. Slide the chandelier canopy up along the chain until it sits flush against the ceiling. Take the decorative nut (often matching the chandelier&apos;s finish) and screw it onto the exposed threaded part of the main hanging bolt, just below the canopy. Hand-tighten this nut firmly to secure the canopy tightly against the ceiling, concealing all the electrical connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oGWYiofD5No</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12432-2</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oGWYiofD5No/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Chandelier Canopy — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Carefully push all connected electrical wires and wire nuts up into the ceiling electrical box, ensuring no wires are pinched or exposed. Slide the chandelier canopy up along the chain until it sits flush against the ceiling. Take the decorative nut (often matching the chandelier&apos;s finish) and screw it onto the exposed threaded part of the main hanging bolt, just below the canopy. Hand-tighten this nut firmly to secure the canopy tightly against the ceiling, concealing all the electrical connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oGWYiofD5No</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12432-3</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yOng-AqiB9w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount and Test Chandelier — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>After completing the electrical connections, carefully align the chandelier&apos;s main base plate with the installed ceiling mounting bracket. Secure the chandelier to the bracket using the provided screws or fastening mechanisms. This usually involves aligning holes and tightening screws to hold the chandelier firmly against the ceiling. Once fully secured, restore power at the main breaker and test the chandelier to ensure all lights are functioning correctly and that there are no flickering issues.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yOng-AqiB9w</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12433-1</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DUASDI5qegA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Bulbs and Shades, Then Test — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Once the canopy is securely installed, carefully screw in the recommended light bulbs. Then, attach any decorative glass shades or covers that came with the chandelier. With all components in place, turn on the circuit breaker and test the light switch to ensure the chandelier illuminates properly. Check for any flickering or issues. Admire the new lighting and the aesthetic patterns cast on the ceiling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DUASDI5qegA</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12433-2</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SCX-yPTDHW8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Light Bulbs and Glass — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Complete the chandelier installation by carefully screwing in the recommended light bulbs into their sockets. If your chandelier includes glass shades or diffusers, install them according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SCX-yPTDHW8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12433-3</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RS0tyWNs20/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Canopy, Install Bulbs, and Test — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Once all electrical connections are made, carefully tuck the connected wires into the ceiling electrical junction box. Slide the chandelier canopy up to the ceiling, covering the electrical connections and the mounting bar, and secure it firmly with the decorative nut. Finally, install the light bulbs into the chandelier sockets. Ensure they are compatible with the fixture&apos;s wattage requirements. With the bulbs installed, return to the breaker box and turn the power back on. Then, flip the wall switch to the &apos;on&apos; position to illuminate your new chandelier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RS0tyWNs20</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12434-1</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Bz_DxJCTp-A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test Fixture — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Return to the main electrical panel and turn the circuit breaker back on. Test the dimmer switch to ensure it controls the chandelier. Check for proper functionality and adjust the dimmer level. Confirm the receptacle also has constant power.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Bz_DxJCTp-A</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12434-2</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SCX-yPTDHW8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Once all physical installation and electrical connections are complete, return to your breaker box and flip the appropriate circuit breaker back to the &apos;ON&apos; position to restore power to the chandelier. Test the light switch to ensure the new fixture is functioning correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SCX-yPTDHW8</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12434-3</loc>
    <lastmod>2026-11-13T23:47:56.408Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Fdbs6xmS52A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test — How to Hang a Chandelier in a Two-Story Foyer</video:title>
      <video:description>Return to your main electrical service panel. Flip the circuit breaker you turned off earlier back to the &apos;ON&apos; position. Then, go to the room where the light fixture was installed and flip the wall light switch to turn on the light. Verify that the new fixture illuminates correctly. If it doesn&apos;t, ensure all bulbs are securely screwed in and check your wiring connections (after turning off power again) or consult a professional electrician.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Fdbs6xmS52A</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:47:56.408Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12424-1</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ASzHLp6kJFE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Attic Opening and Ceiling Height — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>The first step is to determine the correct opening size for the attic ladder. Measure the width of the existing opening, specifically between the trusses. In this video, the opening measured 22.5 inches. This width is crucial as most trusses are set 24 inches on center, providing a standard 22.5 inches between them. Next, measure the length of the opening, which was 63 inches in this case. Finally, measure the distance from the ceiling to the floor (ceiling height). This measurement will dictate the required length of the attic ladder, as ladders come in various lengths to accommodate different ceiling heights (e.g., 54&quot; L x 22.5&quot; W for 8-9&apos; ceilings, 63&quot; L x 22.5&quot; W for 10-12&apos; ceilings). This particular installation is for a ceiling over 10 feet high, requiring a longer ladder that can extend up to 12 feet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ASzHLp6kJFE</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12424-2</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/75UJirmHmmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Rough Opening Dimensions — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>After opening the attic access, the host uses a tape measure to verify the rough opening width. The ladder requires a 22.5-inch width, and the measurement confirms the existing opening between the ceiling joists is approximately 22.5 inches. He also confirms the joists run in the correct direction to allow for the ladder&apos;s installation without cutting structural trusses.</video:description>
      <video:player_loc>https://www.youtube.com/embed/75UJirmHmmc</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12424-3</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iaAr8Ted3QA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Attic Rough Opening — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>Before attempting any removal, it&apos;s crucial to measure the rough opening in the attic to ensure the new ladder will fit. The presenter climbs into the attic to directly measure the framed opening. He clarifies that the &apos;rough opening&apos; refers to the structural framing, not the finished trim, as the finished opening can be misleading. He confirms the existing opening is approximately 26 3/8 inches wide and 54 3/4 inches long, which is slightly larger than the new ladder&apos;s 25x54 inch requirement, indicating that shims will be needed later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iaAr8Ted3QA</video:player_loc>
      <video:duration>119</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12422-1</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0faC6IiG1gQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Plan Attic Opening Modifications — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>From the attic side, the presenter inspects the rough opening where the old ladder is installed. He notes that the opening is slightly too short and not perfectly square, requiring some adjustments to existing wooden blocks. He also identifies electrical wires running through the opening, which will need to be properly managed during the framing process. He plans to add 2x4 blocking to create a secure, square frame for the new ladder.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0faC6IiG1gQ</video:player_loc>
      <video:duration>130</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12423-1</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ASzHLp6kJFE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Attic Opening and Ceiling Height — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>The first step is to determine the correct opening size for the attic ladder. Measure the width of the existing opening, specifically between the trusses. In this video, the opening measured 22.5 inches. This width is crucial as most trusses are set 24 inches on center, providing a standard 22.5 inches between them. Next, measure the length of the opening, which was 63 inches in this case. Finally, measure the distance from the ceiling to the floor (ceiling height). This measurement will dictate the required length of the attic ladder, as ladders come in various lengths to accommodate different ceiling heights (e.g., 54&quot; L x 22.5&quot; W for 8-9&apos; ceilings, 63&quot; L x 22.5&quot; W for 10-12&apos; ceilings). This particular installation is for a ceiling over 10 feet high, requiring a longer ladder that can extend up to 12 feet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ASzHLp6kJFE</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12423-2</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/75UJirmHmmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Rough Opening Dimensions — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>After opening the attic access, the host uses a tape measure to verify the rough opening width. The ladder requires a 22.5-inch width, and the measurement confirms the existing opening between the ceiling joists is approximately 22.5 inches. He also confirms the joists run in the correct direction to allow for the ladder&apos;s installation without cutting structural trusses.</video:description>
      <video:player_loc>https://www.youtube.com/embed/75UJirmHmmc</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12423-3</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YTePvQmluCU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Rough Opening Width — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>Using a tape measure, carefully measure the width of the rough opening in at least three different locations: near the top (header), near the middle, and near the bottom (sill). This helps identify any inconsistencies or tapering in the opening&apos;s width. Record these measurements. The smallest measurement will be the effective width of the opening. It is common practice to measure from stud face to stud face on the rough jambs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YTePvQmluCU</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12425-1</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/75UJirmHmmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Rough Opening Dimensions — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>After opening the attic access, the host uses a tape measure to verify the rough opening width. The ladder requires a 22.5-inch width, and the measurement confirms the existing opening between the ceiling joists is approximately 22.5 inches. He also confirms the joists run in the correct direction to allow for the ladder&apos;s installation without cutting structural trusses.</video:description>
      <video:player_loc>https://www.youtube.com/embed/75UJirmHmmc</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12425-2</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iaAr8Ted3QA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Attic Rough Opening — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>Before attempting any removal, it&apos;s crucial to measure the rough opening in the attic to ensure the new ladder will fit. The presenter climbs into the attic to directly measure the framed opening. He clarifies that the &apos;rough opening&apos; refers to the structural framing, not the finished trim, as the finished opening can be misleading. He confirms the existing opening is approximately 26 3/8 inches wide and 54 3/4 inches long, which is slightly larger than the new ladder&apos;s 25x54 inch requirement, indicating that shims will be needed later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iaAr8Ted3QA</video:player_loc>
      <video:duration>119</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12425-3</loc>
    <lastmod>2026-11-13T23:43:59.507Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ASzHLp6kJFE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Attic Opening and Ceiling Height — How to Measure an Attic Ladder Rough Opening</video:title>
      <video:description>The first step is to determine the correct opening size for the attic ladder. Measure the width of the existing opening, specifically between the trusses. In this video, the opening measured 22.5 inches. This width is crucial as most trusses are set 24 inches on center, providing a standard 22.5 inches between them. Next, measure the length of the opening, which was 63 inches in this case. Finally, measure the distance from the ceiling to the floor (ceiling height). This measurement will dictate the required length of the attic ladder, as ladders come in various lengths to accommodate different ceiling heights (e.g., 54&quot; L x 22.5&quot; W for 8-9&apos; ceilings, 63&quot; L x 22.5&quot; W for 10-12&apos; ceilings). This particular installation is for a ceiling over 10 feet high, requiring a longer ladder that can extend up to 12 feet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ASzHLp6kJFE</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-11-13T23:43:59.507Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12412-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VSz8w1hm6Vk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power at Circuit Breaker — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Before working on any electrical fixture, go to the main circuit breaker panel of your home. Identify the circuit breaker that controls the lighting fixture you are working on. Flip the circuit breaker to the &apos;OFF&apos; position to completely cut power to that specific circuit. This crucial step ensures electrical safety and prevents accidental electrocution while working with the wiring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VSz8w1hm6Vk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12412-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/azWQeDUlSBo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ensure Electrical Safety — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Before starting any electrical work, always prioritize safety. Locate the circuit breaker panel for your home. Identify the circuit breaker that controls the power to the area where you will be working. This might be a general lighting circuit for that floor or a specific circuit for an adjacent room. Flip the identified circuit breaker to the &apos;OFF&apos; position. Use a non-contact voltage tester to confirm that the power is indeed off at the nearest existing light fixture or outlet in the work area. This is a critical step to prevent electric shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/azWQeDUlSBo</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12412-3</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FwCp0KLGwP0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power at Circuit Breaker — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Before proceeding with any electrical work, locate the main electrical panel (usually in a basement or utility room) and identify the circuit breaker that controls the light fixture. Turn this breaker to the &apos;OFF&apos; position. Double-check that the power is indeed off at the light fixture itself by attempting to turn it on via the wall switches, which should now be unresponsive. This is a critical safety step to prevent electrical shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FwCp0KLGwP0</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12413-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m4Uh1i7Y9ps/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Sconce Placement and Drill Hole — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Before painting the second coat, hold the sconce against the wall to visualize its placement. The video recommends placing bedside lights low enough to reach from bed but high enough to clear bedside furniture. Use a tape measure to mark the desired height (e.g., 53 inches from the floor) and horizontal center between vertical slats. Use a mounting plate as a template to mark screw hole locations. Employ a cordless drill with a large hole saw (e.g., 3.5 inches) to drill a clean circular hole through the wall. Optionally, use a shop vac to collect dust during drilling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m4Uh1i7Y9ps</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12413-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hhMzm1A4pm0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Mark Sconce Placement — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Begin by gathering all the necessary materials: the sconce itself, the mounting bracket, essential tools, and hardware. Next, determine the ideal placement for the sconce. Hold the mounting bracket against the wall, considering its proximity to the headboard, and ensure there&apos;s ample clearance not only for the sconce but also for the lampshade that will be mounted onto it. Once the comfortable spot is identified, use a pencil to trace the drilling points for the bracket&apos;s holes. Finally, use a level to double-check that the marked points are perfectly straight and level before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hhMzm1A4pm0</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12413-3</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xk5yfGib00o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Sconce Base to Wall — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>First, select the exact location on the wall where you want to install the sconce. Hold the sconce base (a black, circular plate is shown in the video) against the wall and use a pencil to mark the positions for the mounting screws. Before drilling, use a stud finder to determine if there is a wall stud behind the marked locations. If you can align the screw holes with a stud, drill pilot holes slightly smaller than your screws into the stud. If no stud is present (as is common with drywall installations), you must use appropriate wall anchors to ensure the sconce is securely stabilized and does not sag or pull away from the wall over time. Drill holes sized for your chosen wall anchors. Insert the wall anchors into the drilled holes, following their specific installation instructions (e.g., tapping in, turning until flush). Finally, align the sconce base with the holes (and anchors), and drive the mounting screws through the base into the wall (and anchors). Tighten the screws until the sconce base is firmly secured to the wall and exhibits no movement. Over-tightening can damage drywall or anchors, so tighten until snug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xk5yfGib00o</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12414-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FlyQYNgJm7o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run New Wires and Install Boxes — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>From the basement, new NM-B (Romex) electrical cable is pulled up through the pilot hole and routed to the first sconce location. The old wiring is deemed too brittle for reuse. The new wire is then fed into the opening of the old electrical box. After pulling the wire, the old box is removed, and a new, larger electrical box (number 8) is installed in its place. This larger box provides more space for wire connections and is secured to the wall studs. This process is repeated for the second sconce location, fishing wire from the first sconce box to the second, avoiding unnecessary holes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FlyQYNgJm7o</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12414-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CqK4-Avyo3U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Sconce Electrical Boxes — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>With the Romex cable pulled through to each sconce location, the outer sheath of the Romex is stripped back, and the individual conductors are fed through one of the knockouts on the pancake electrical box. The box is then aligned with the stud and securely fastened to the wall stud using appropriate screws. This prepares the boxes for the final wiring of the sconces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CqK4-Avyo3U</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12414-3</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iiT8U30GhKw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select and Prepare Electrical Box — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>After successfully cutting the hole and retrieving the electrical wires, inspect the cavity to determine if there is a wall stud directly behind the drywall at the fixture location. If a stud is present, use a &apos;pancake box&apos; (a shallow metal electrical box designed to mount directly to a stud). If no stud is present, an &apos;old work box&apos; with adjustable flanges would be used to secure it to the drywall. In this scenario, a stud is present, so two wire clamp inserts need to be added to the pancake box. These are small plastic or metal pieces that push into designated knockouts on the electrical box from the back, designed to secure the electrical cables as they enter the box. Ensure they are firmly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iiT8U30GhKw</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12415-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nb9EewyDEww/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Wires for Fixture Connection — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Once the electrical wires are routed to each ceiling hole, pull a sufficient length of wire through each opening. Use wire strippers to carefully remove about 3/4 inch of insulation from the ends of the black (hot), white (neutral), and bare copper (ground) wires.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nb9EewyDEww</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12415-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i8p7E23yyf8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Wires in Outlet and Ceiling Boxes — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Prepare the wires in the outlet and ceiling boxes. The presenter uses &apos;14/2 wire,&apos; which means it contains two 14-gauge insulated wires (one black &apos;hot&apos; and one white &apos;neutral&apos;) and one bare 14-gauge ground wire. First, carefully strip the outer sheathing from each wire, ensuring at least 8 inches of insulated wire extends into the box. Then, connect all bare copper ground wires together using a pigtail (a short piece of wire connected to the main bundle, which will later connect to the outlet/light fixture). Next, cut all wires so there is at least 6 inches sticking out of the box (this is usually a minimum code requirement). Finally, carefully fold the prepared wires neatly back into the box to protect them until the devices are installed. For ceiling lights, many modern fixtures come with pre-attached pigtails, simplifying this step; simply strip the sheathing, splice the wires (hot to hot, neutral to neutral, ground to ground), and fold them into the box.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i8p7E23yyf8</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12415-3</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xOZv17BPTZA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Strip Wires for Connections — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Carefully remove the outer jacket and any paper wrapping from the ends of the incoming wires in each electrical box to expose the individual insulated conductors (black, white, and bare copper). Then, use a wire stripper to remove approximately 1/2 to 3/4 inch of insulation from the end of each individual black and white wire. For a light fixture that does not require a ground, twist the bare copper ground wire together or bend it neatly aside inside the fixture&apos;s junction box, as it will not be used for the fixture itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xOZv17BPTZA</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12416-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9JkZiK_us5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Fixture Bracket — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>After preparing the wires, attach the mounting bracket for the wall sconce to the existing electrical box. Use a screwdriver to secure the bracket. Once loosely attached, use a level, such as a Milwaukee compact level, to ensure the bracket is perfectly horizontal. Adjust the bracket as needed and then tighten the screws securely. This ensures the fixture will hang straight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9JkZiK_us5s</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12416-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hhMzm1A4pm0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Mounting Bracket — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>With the wall anchors in place, take the screws provided with your sconce and begin to drive them into the wall anchors. Do not screw them in all the way; leave a small gap between the screw head and the wall. This gap will allow you to insert the mounting bracket. Once the screws are set, take the mounting bracket, align its keyholes with the partially inserted screws, and slide it down so the screws are seated in the narrow part of the keyholes. Now, use a screwdriver to firmly tighten both screws. It&apos;s crucial for the bracket to be as tight and secure as possible to safely hold the sconce.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hhMzm1A4pm0</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12416-3</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MtSw7kz1_Wc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Wall Sconce to Plate — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>With the electrical connections made and tucked away, align the pre-assembled wall sconce with the mounting plate on the wall. Carefully guide the mounting screws from the plate through the designated holes in the sconce&apos;s base. Secure the sconce to the mounting plate using the provided clear washers and steel mounting nuts. Hand-tighten these nuts initially, then use a tool if necessary to ensure the sconce is firmly attached and flush against the wall, without being excessively tight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MtSw7kz1_Wc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12417-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m4Uh1i7Y9ps/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Connect Sconce Wiring — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Use wire strippers to remove approximately 1/2 to 3/4 inch of insulation from the black (hot), white (neutral), and bare copper (ground) wires coming from the wall. Repeat this for the corresponding wires on the sconce. Connect the black wires together, the white wires together, and the ground wires (if applicable) using wire nuts. If the sconce does not have a separate ground wire, connect the house ground to the mounting plate. Mount the sconce&apos;s backplate to the electrical box, carefully tucking the connected wires into the box. Secure the sconce with screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m4Uh1i7Y9ps</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12417-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hi1qPzg1YKI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Electrical Wires of the Sconce — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Carefully remove the sconce from its packaging and identify the wires: typically a bare copper or green wire (ground), a white wire (neutral), and a black wire (hot). From the electrical box, you will find similar wires. Twist the bare copper/green ground wire from the sconce together with the ground wire from the house, securing them with a wire nut. Repeat this for the white neutral wires and then for the black hot wires. Ensure each connection is tight and secure by gently tugging on the wires after twisting them together and applying the wire nut. Tuck the connected wires neatly back into the electrical box, being careful not to pinch them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hi1qPzg1YKI</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12417-3</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FlyQYNgJm7o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire and Install Sconces and Switch — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>The professional begins wiring the new sconces. He strips the ends of the new electrical wires and connects them to the sconce&apos;s wiring using appropriate wire nuts, ensuring correct polarity (hot to hot, neutral to neutral, ground to ground). The sconce mounting plate is then secured to the electrical box. The sconce fixture is attached, and the light bulb is installed. The same process is followed for the second sconce. Simultaneously, the wires in the main switch box are connected to a new wall switch, replacing the old non-functional one. The switch plate is then attached. After all connections are made and verified, the power is restored at the breaker box.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FlyQYNgJm7o</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12418-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MtSw7kz1_Wc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Wall Sconce to Plate — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>With the electrical connections made and tucked away, align the pre-assembled wall sconce with the mounting plate on the wall. Carefully guide the mounting screws from the plate through the designated holes in the sconce&apos;s base. Secure the sconce to the mounting plate using the provided clear washers and steel mounting nuts. Hand-tighten these nuts initially, then use a tool if necessary to ensure the sconce is firmly attached and flush against the wall, without being excessively tight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MtSw7kz1_Wc</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12418-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pJele8sjPmw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount New Fixture to Wall — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Locate and remove any decorative covers or caps from the ends of the mounting screws on the new fixture&apos;s base plate. Carefully align the holes on the back of the new sconce fixture with the mounting screws protruding from the mounting hardware. Gently slide the fixture onto the screws until it sits flush against the wall. Ensure the fixture is level and straight before proceeding. Re-attach the decorative caps or nuts onto the mounting screws and tighten them securely to hold the fixture firmly in place against the wall. Do not over-tighten, as this could damage the fixture or the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pJele8sjPmw</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12418-3</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X0DAE7IWlPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Sconce Base to Wall Bracket — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Align the assembled sconce fixture with the mounted bracket on the wall. The sconce base should slide directly over the bracket. Once aligned, locate the small screw holes on each side of the sconce&apos;s base. Use a Phillips head screwdriver to insert and tighten the provided gold screws into these holes, securing the sconce to the bracket. Ensure the sconce is flush against the wall and firmly attached.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X0DAE7IWlPI</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12419-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A5PONP-dQTI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Lightbulb and Lamp Shade — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Screw a lightbulb into the sconce&apos;s socket. The video specifically mentions using a WiFi-controlled lightbulb for smart home integration. Finally, attach the lamp shade to the sconce fixture. Once everything is securely in place, you can turn the power back on at the circuit breaker and test your new sconce.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A5PONP-dQTI</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12419-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AR77HPVmHZM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Shades and Insert Light Bulbs — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Once the sconce bodies are securely mounted, attach the decorative white shades to the fixtures. Ensure they are properly seated and stable. Then, carefully screw in the light bulbs into each sconce socket. After all fixtures are assembled, turn the power back on at the main breaker panel and test the new lights.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AR77HPVmHZM</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12419-3</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h9-xzpcA1Ss/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert Light Bulb and Test — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Finally, take your battery-powered light bulb, activate it (if it has a switch), and carefully screw or place it into the sconce&apos;s light bulb socket. Once the bulb is in place and turned on, the installation is complete and the sconce is ready to use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h9-xzpcA1Ss</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12420-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ykst0YPr-F0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test Fixture — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Return to your circuit breaker panel and switch the power back &apos;ON&apos; for the circuit you were working on. Test the new light fixture by flipping the wall switch. Ensure it illuminates correctly. If it doesn&apos;t, switch off the power again and double-check all wire connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ykst0YPr-F0</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12420-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9JkZiK_us5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Light Fixture — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Once the entire wall sconce is installed and all components are securely fastened, turn the power back on at the circuit breaker. Test the newly installed light fixture to ensure it functions correctly. If the light does not turn on, recheck the electrical connections with the power off at the breaker again.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9JkZiK_us5s</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12420-3</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pJele8sjPmw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Power On and Final Assembly — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>If your fixture has a ring clip to hold the glass shade, remove it. Screw a new light bulb into the socket of the installed sconce. Flip the circuit breaker back to the &apos;ON&apos; position to restore power. Test the sconce by turning on its wall switch (if applicable) to ensure it lights up. If the light does not turn on, troubleshoot by checking the wall switch, trying a different light bulb (it might be faulty), or re-checking the wire connections after turning the power off again. Once the light is confirmed working, turn off the power at the breaker, remove the light bulb, carefully place the glass shade (globe) over the socket, and secure it with the ring clip. Finally, re-insert the light bulb.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pJele8sjPmw</video:player_loc>
      <video:duration>102</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12421-1</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IJcdZ5QTGAw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Wipe-down and Finish Protection — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>With the anti-static-treated microfiber cloth, meticulously wipe all surfaces of the wall sconce again. This step removes any remaining fine dust particles, cleans away smudges, and most importantly, applies a thin layer of the anti-static solution. This layer helps to repel future dust accumulation, keeping the fixture cleaner for longer. Pay attention to any decorative elements or hard-to-reach areas. Ensure a uniform finish without streaks. After wiping, carefully step down from the stool and remove it from the area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IJcdZ5QTGAw</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12421-2</loc>
    <lastmod>2026-11-13T23:42:18.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rVlknFOJnWM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wipe Down Sconce Fixture — How to Install a Wall Sconce in a Stairwell</video:title>
      <video:description>Using a separate clean, damp microfiber cloth (or one sprayed with a general multi-surface cleaner), gently wipe down the base and outer surfaces of the wall sconce fixture. Pay attention to any crevices or decorative elements where dust might accumulate. Ensure the fixture is dry after cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rVlknFOJnWM</video:player_loc>
      <video:publication_date>2026-11-13T23:42:18.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12406-1</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WlA_VOUBJuM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Focusing on Flickering Lights and Initial Commentary — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>The camera then focuses directly on the recessed LED lights on the ceiling. It becomes immediately apparent that several of the lights are exhibiting significant and rapid flickering. The speaker can be heard making sarcastic remarks, such as &apos;Oh yeah, LED lights are great,&apos; and &apos;What a joke,&apos; clearly indicating that the flickering is an undesirable and problematic condition. This direct visual confirms the primary diagnostic symptom of unstable illumination.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WlA_VOUBJuM</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12406-2</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RiINrsporD0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Observe and Discuss Flickering LED Lights — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>The video begins with an individual pointing out an issue with &apos;the wrong LED light bulbs.&apos; The light fixtures, embedded in the ceiling, are observed to be flickering inconsistently. A conversation ensues where one person asserts that the bulbs are brand new and were recently changed over the weekend, confirming they are LED. The other person acknowledges the flickering, describing it as &apos;a flick it,&apos; indicating the observable malfunction. The video focuses on the identification of this problem rather than providing a resolution or instructional steps for repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RiINrsporD0</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12406-3</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IR4s4FcBfEM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify the Flickering Light — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>The video begins by showcasing a common household problem: a recessed light bulb that is visibly flickering. The flickering is inconsistent, lasting only a few seconds at a time. The light cycles between being steadily on and flickering rapidly, which can be disruptive and indicate a failing bulb or an electrical issue. In this case, the flickering is determined to be from a single bulb.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IR4s4FcBfEM</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12407-1</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qG07UDxyMn4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Test and Disassembly — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>Begin by screwing the LED bulb into a live bulb holder or socket to confirm it is not working. Once confirmed, carefully use a small flat-head screwdriver or a pry tool to gently separate the plastic diffuser cover from the base of the LED bulb. The diffuser usually snaps or is lightly glued on. Once the cover is off, you will expose the circuit board with multiple small LED components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qG07UDxyMn4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12407-2</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yESLzP4PzEI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Disassemble the Bulb — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>First, screw the LED bulb into a working light socket or test fixture to confirm it is indeed burnt out and does not light up. Once confirmed, carefully twist or pry off the plastic diffuser cover from the LED bulb to expose the internal circuit board with all the individual LED chips. This might require gentle force or a small prying tool.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yESLzP4PzEI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12407-3</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NkH0eZoLDAA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Non-Functional LED Bulb — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>Begin by taking the LED bulb that is suspected to be faulty. Insert the bulb into a working light fixture or a test socket. Observe if the bulb illuminates. If it does not light up, it confirms the bulb is non-functional and requires repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NkH0eZoLDAA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12408-1</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZrjFpHLvTxE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose and Inspect Internal Components — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>A flickering LED light fixture, often attributed to loose external mounting or faulty LEDs, was examined. The presenter removed the fixture from its ceiling mounting (implied, not shown in detail) to inspect its internal components. He highlighted that despite common assumptions of LED failure in &apos;disposable&apos; fixtures, the root cause could be a less obvious internal securement issue, such as a faulty connection within the power supply or LED driver. The flickering was intermittent, suggesting a connection problem rather than a complete component failure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZrjFpHLvTxE</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12408-2</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ftHc2ZQ-0OY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Diagnosis of Faulty LED Light — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>The presenter first shows a flickering LED ceiling light and then an LED bulb that is completely dead. To diagnose the flickering ceiling light, a multimeter is used to test the voltage output from the driver section. The multimeter reads approximately 114V DC, which indicates that the driver is supplying power as expected. This rules out the driver as the cause of the flickering, pointing to the MCPCB (Metal Core Printed Circuit Board) and its LED chips as the source of the problem. Faulty LEDs typically have a small black dot on their surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ftHc2ZQ-0OY</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12409-1</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MIV-XnIDl4Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Loose or Damaged Connections — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>Carefully examine all wire connections within the fixture. The video specifically highlights two wires where the insulation has melted and the wires appear fused together, indicating a significant problem due to overheating from a loose or faulty connection. Look for discoloration, brittle insulation, exposed copper, or wires that pull out easily from their connections. This step is critical for pinpointing the exact location of the hazard.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MIV-XnIDl4Y</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12409-2</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OdaMzAznch4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair or Replace Faulty Wiring/Components — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>Always ensure the power is OFF. If a loose connection was found, tighten it securely. If a wire was open or corroded, carefully remove the damaged section and replace it with a new wire of the same gauge and type, ensuring proper insulation. Use appropriate wire connectors (e.g., wire nuts, crimp connectors) for secure and insulated joints. If a component (like a lamp holder or an integrated LED driver) showed high resistance or an open circuit, it likely needs replacement. When replacing components, ensure they are rated for the correct voltage and wattage. After making any repairs or replacements, ensure all connections are tight and well-insulated. *Warning*: Always double-check your work for exposed wires or loose connections before restoring power. Using heat shrink tubing can provide excellent insulation for splices.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OdaMzAznch4</video:player_loc>
      <video:duration>90</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12409-3</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FE_keZL9rYE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Troubleshoot First Light Fixture and Resolve (Building 1) — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>The technician proceeds to the first light fixture in the building&apos;s lighting circuit. The cover is removed, revealing the wiring connections. It&apos;s discovered that a wire connection is loose, likely dislodged or compromised during the pressure washing. The loose wire is identified and securely reconnected. After this repair, all the building lights immediately come on. This confirms that the loose connection in the first fixture was preventing power from flowing to the rest of the daisy-chained lights.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FE_keZL9rYE</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12410-1</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OdaMzAznch4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair or Replace Faulty Wiring/Components — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>Always ensure the power is OFF. If a loose connection was found, tighten it securely. If a wire was open or corroded, carefully remove the damaged section and replace it with a new wire of the same gauge and type, ensuring proper insulation. Use appropriate wire connectors (e.g., wire nuts, crimp connectors) for secure and insulated joints. If a component (like a lamp holder or an integrated LED driver) showed high resistance or an open circuit, it likely needs replacement. When replacing components, ensure they are rated for the correct voltage and wattage. After making any repairs or replacements, ensure all connections are tight and well-insulated. *Warning*: Always double-check your work for exposed wires or loose connections before restoring power. Using heat shrink tubing can provide excellent insulation for splices.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OdaMzAznch4</video:player_loc>
      <video:duration>90</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12410-2</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lqres-4RrrU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace and Install the New LED Light — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>After confirming power, disconnect the faulty LED light module from its &apos;black box&apos; connector by twisting and pulling. Connect a new LED light module to the existing connector. If the new module illuminates, it confirms that the old module was faulty and the wiring is intact. Push the new light module back into the ceiling hole, ensuring the clips secure it properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lqres-4RrrU</video:player_loc>
      <video:duration>82</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12410-3</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NkH0eZoLDAA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Non-Functional LED Bulb — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>Begin by taking the LED bulb that is suspected to be faulty. Insert the bulb into a working light fixture or a test socket. Observe if the bulb illuminates. If it does not light up, it confirms the bulb is non-functional and requires repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NkH0eZoLDAA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12411-1</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/da-Uh9tHqkM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test New Light Fixture — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>Return to the circuit breaker box and flip the switch for the light fixture back to the &apos;ON&apos; position. Return to the room and test the light switch to ensure the new LED panel turns on and off properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/da-Uh9tHqkM</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12411-2</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4J7jjc70jDY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test New Light — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>With the new recessed light fixture securely installed in the ceiling, return to the main electrical panel (consumer unit). Locate the &apos;LIGHTS&apos; circuit breaker that was previously turned off. Flip this circuit breaker back to the &apos;ON&apos; position to restore electrical power to the circuit. Finally, check the newly installed light fixture to ensure it illuminates properly. Observe if there is any flickering or buzzing. It is also good practice to quickly check any other lights or devices on the same circuit to confirm they are functioning as expected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4J7jjc70jDY</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12411-3</loc>
    <lastmod>2026-11-13T23:41:56.570Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BlfnZQBHjYg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall Bulb and Test — How to Fix Flickering LED Stair Lights</video:title>
      <video:description>After all loose connections are secured, carefully screw the light bulb back into the socket. Once the bulb is in place, return to the circuit breaker panel and turn the power back on to the circuit. Finally, turn on the light switch to verify that the flickering issue has been resolved and the light fixture now operates consistently and reliably.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BlfnZQBHjYg</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:41:56.570Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12400-1</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ErSPan3kT2s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify and Prepare Loose Seam — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Begin by clearly identifying the section of carpet on the stairs where the seam has come loose. Gently lift the edge of the carpet seam to separate it from the subfloor, ensuring enough space to apply adhesive. The video shows a hand easily lifting a section of carpet that has detached along the edge of a stair tread, revealing the backing and subfloor beneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ErSPan3kT2s</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12400-2</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JF9PiRuYKr0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Damage and Initial Trim — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Begin by closely inspecting the damaged area of the carpet on the stair nose. The video shows a section where the carpet fibers are frayed, pulled up, and the underlying grid/backing is visible, indicating the carpet is detached from the stair. Take a utility knife with a fresh, sharp blade and carefully trim away any visibly loose or hanging carpet fibers from the edges of the damaged section. This helps to clean up the area and prevent further unraveling, preparing it for the adhesive application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JF9PiRuYKr0</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12400-3</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BxB94uXKUb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess and Prepare Damaged Area — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Begin by inspecting the carpet on the stair to pinpoint the exact area where it has become loose or worn. Gently lift the carpet edge to fully expose the underside of the carpet backing and the surface of the stair tread (subfloor) beneath. Using a scraping tool or a stiff brush, meticulously remove all traces of old adhesive, any remaining padding remnants, dust, or other debris from both surfaces. This ensures that the new adhesive will have a clean, strong surface to bond to.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BxB94uXKUb4</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12401-1</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12401-2</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rON0c9UvU2E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Clean Stair Treads — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Begin by thoroughly cleaning the stair treads. You can use a microfiber cloth or any suitable cloth, optionally combined with a handheld vacuum, to remove all dust and loose dirt. The goal is to ensure the entire stair surface is clean and completely dry. This is crucial for the adhesive on the back of the carpet treads to stick properly. Avoid using any cleaning products that might leave a greasy residue, such as Pledge or Pine-Sol, as this can compromise the adhesive bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rON0c9UvU2E</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12401-3</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Staircase — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Before installing the carpet stair treads, thoroughly clean the entire staircase. Begin by sweeping all wooden steps to remove any loose dust, dirt, or debris. Once swept, use a damp cloth to wipe down each step and the front edge (riser/nose) to ensure no fine dust or residue remains. This creates a clean, smooth surface for the adhesive treads to bond effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12402-1</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gEAQPMdeRlI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Spray Adhesive — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Once the carpet is pulled back, take a can of spray adhesive and apply it evenly across the entire surface of the stair tread. This adhesive will help bond the carpet more securely to the step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gEAQPMdeRlI</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12402-2</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wnsFm_2sahw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Spray Adhesive — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Once the carpet is pulled back, take your spray adhesive. Apply a generous, even layer of spray adhesive directly to the exposed stair tread (the horizontal part) and the vertical riser (the vertical part) of the stair. Ensure good coverage to provide a strong bond for the carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wnsFm_2sahw</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12402-3</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BxB94uXKUb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Adhesive to Carpet and Subfloor — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Once both surfaces are clean and dry, apply a specialized carpet adhesive. Using a small applicator brush or a spatula, spread a uniform layer of adhesive onto the underside of the lifted carpet edge. Ensure the adhesive covers the entire area that will be re-bonded. Subsequently, apply a layer of adhesive or a suitable primer to the exposed stair tread where the carpet will sit. The video shows different types of adhesives being applied at various points; some appear to be directly from a squeeze bottle or can, and others spread with a brush or small spatula. This dual application ensures maximum bond strength.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BxB94uXKUb4</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12403-1</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12403-2</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wnsFm_2sahw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Re-tension and Secure Carpet to Gripper — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Carefully pull the carpet back into place over the applied adhesive, ensuring it is taut over the stair tread and riser. Firmly press the carpet down onto the stair. Make sure to pull the carpet tightly enough so that it engages with the existing gripper strips (also known as tack strips) located at the back edge of the stair tread, securing it into position. Use your hands to smooth out any wrinkles or bubbles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wnsFm_2sahw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12403-3</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Carpet Treads — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Starting from the bottom stair, carefully align the first carpet tread according to your predetermined placement (e.g., centered, with a consistent gap from the sides and front edge). Press down firmly, working from the center outwards, to ensure good contact between the adhesive and the stair surface. Apply pressure evenly across the entire surface of the tread. Repeat this process for each subsequent stair, moving upwards. Take your time to ensure each tread is straight and securely adhered. For added security, you can use a small roller or your hands to press down on the entire surface of each tread after placement. The video shows the Golden Retriever comfortably using the stairs, indicating the treads are securely installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12404-1</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kQdr9Ih7YGE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Weight Down Patch for Curing — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>After securing the patch and tack strip, place several heavy books or other weights evenly over the entire patched area. Leave these weights in place for at least 24 hours. This sustained pressure ensures the Gorilla Glue forms a strong bond between the carpet patch and the subfloor, resulting in a flat and durable repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kQdr9Ih7YGE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12404-2</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Hir2dgqTgwg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Pressure and Final Smooth — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>To ensure a strong and lasting bond, place a heavy, flat object (like a box, book, or tool case) directly over the newly patched carpet area. Allow this weight to sit for an extended period (typically several hours or overnight, depending on the adhesive manufacturer&apos;s recommendations) to help the adhesive cure and create a firm connection. Once sufficient time has passed, remove the heavy object and gently smooth the carpet with your hands, blending the newly secured patch with the surrounding carpet for a seamless and uniform appearance. The repair should now be complete, with the carpet firmly re-attached and the frayed edge eliminated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Hir2dgqTgwg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12404-3</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ai-F0FXwbZs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press and Secure Seam — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Carefully align the two separated carpet edges and press them firmly together by hand. Then, use a carpet seam roller, applying steady pressure, to further embed the carpet backing into the new adhesive and eliminate any air pockets. Finally, place heavy objects, such as a metal box or weights, along the entire length of the repaired seam to maintain continuous pressure until the adhesive fully cures, which typically takes several hours or overnight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ai-F0FXwbZs</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12405-1</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sNk0YOr3JcA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim Loose Carpet Fibers — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>With the carpet now firmly re-adhered, the person takes a pair of small, sharp scissors and meticulously trims off all the loose and frayed threads along the edge of the stair nosing. This step is crucial for both aesthetic improvement and preventing the carpet from fraying again in the future. The trimming creates a much cleaner and safer edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sNk0YOr3JcA</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12405-2</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EKobsMo5BlE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tuck and Finish Carpet Edges — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>Using a carpet tucking tool (often called a stair tool or carpet awl), carefully tuck any excess carpet material into the crease where the stair tread meets the riser and along any other edges, such as where the carpet rolls over the nose of the stair. This creates a clean, sharp, and professional finish. Trim any visible excess carpet fibers with a utility knife if necessary. Finally, use your hand or a carpet brush to gently brush the carpet pile in the correct direction, blending the new patch seamlessly with the existing carpet on adjacent stairs and making the repair virtually undetectable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EKobsMo5BlE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12405-3</loc>
    <lastmod>2026-11-13T23:39:49.453Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mRSiVAuSeNM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tuck and Trim Carpet Edge — How to Re-Stick a Carpet Stair Tread That Is Lifting</video:title>
      <video:description>After the seaming tape has cooled and set, use a carpet tucker tool (also known as a stair tool) to push and secure the carpet edge onto the newly installed tack strip. Work systematically along the edge, ensuring the carpet is taut and fully engaged with the tacks. Then, use a wall trimmer or carpet knife to carefully cut away any excess carpet material, creating a perfectly straight and clean edge that sits flush against the step or wall. This ensures a professional and aesthetically pleasing transition.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mRSiVAuSeNM</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:39:49.453Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12394-1</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zbqXUWyWBDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Clear Damaged Areas — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Begin by thoroughly inspecting the brick steps for any loose, broken, or deteriorating bricks. Gently pull out any bricks that come out easily by hand. Once all loose bricks are removed, use a trowel to scrape out any old, loose mortar, dirt, and foreign debris from the exposed areas. If the mortar is particularly stubborn or old, a screwdriver and hammer may be necessary to chip it away effectively. The goal is to ensure all surfaces are meticulously cleaned and flat, providing a stable base for the new mortar and bricks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zbqXUWyWBDg</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12394-2</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FiqUqwcAzKg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Existing Steps and Plan Repair — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Begin by closely inspecting the existing brick steps, as shown from 0:13.000 to 0:32.000. The video highlights how bricks laid flat for treads tend to deteriorate due to water penetration, especially in climates with freeze-thaw cycles. The plan is to remove these problematic brick treads and replace them with solid limestone caps, which will provide a more durable and weather-resistant surface. This initial assessment helps in understanding the scope of demolition and construction required.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FiqUqwcAzKg</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12394-3</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/j0080oBwsLc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Damage and Remove Loose Material — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Begin by inspecting the stone steps, particularly the treads and risers, for signs of damage such as cracks, chips, or loose sections. Use a pry bar to gently lift and remove any stones that are no longer securely bonded. Follow up with a trowel or a similar scraping tool to clear away loose mortar, old concrete, dirt, and any other debris from the underlying step structure. This ensures a clean and stable surface for new repairs. The video highlights thin, loose stones as the primary issue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/j0080oBwsLc</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12395-1</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uRU-qPKMC7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Mortar Joints by Cleaning Out Loose Material — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Identify the repair areas where loose or crumbling mortar is present. Using a sturdy tool like an old screwdriver or a brick chisel, carefully chip away all loose mortar from the joints. Ensure the joints are cleaned out to a consistent depth. Once all loose material is removed, use a brush to thoroughly clean out any remaining debris or dust from the joints, preparing them for the new mortar.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uRU-qPKMC7Q</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12395-2</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YU6xF6IGJzI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Loose Mortar and Clean Joints — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Using a small, flat-bladed tool (like a mini-pry bar or chisel), carefully scrape out any loose or crumbling mortar from the joints and cracks that need repair. The goal is to remove all unstable material to create a solid base for the new mortar. Once the loose material is removed, use a brush or a blower to clean out any remaining dust or small debris from the joints. This ensures a strong bond between the old and new mortar.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YU6xF6IGJzI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12395-3</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mfY2CkfxBNI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Old Mortar — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>The first step is to remove any old, crumbling mortar or debris from the area where the brick is missing. Use a hammer and a cold chisel to carefully chip away at the remaining old mortar, ensuring a clean and stable surface for the new mortar. Work methodically to clear all connecting edges.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mfY2CkfxBNI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12396-1</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WYqhD7o7EYo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mortar Mix Preparation — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>In a wheelbarrow, combine one bucket of Portland cement with two buckets of Mason sand. Gradually add water while mixing thoroughly with a shovel or hoe until a stiff, consistent mortar is achieved. The consistency should be firm enough to hold its shape but wet enough to be workable. This specific ratio is chosen for strength and durability in outdoor applications.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WYqhD7o7EYo</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12396-2</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mdOAajTvWrA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix Mortar to Correct Consistency — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>In a 5-gallon bucket, combine water with Sakrete Type N Mortar Mix. The mortar mix should contain Portland cement and sand, with no large rocks. Start by adding a couple of trowel-fuls of mortar mix to the bucket, then gradually add water. Stir the mixture with a wooden stick until it reaches a thick, paste-like consistency. It should be soupy enough to move slightly when the bucket is tilted but not like a &apos;bowl of soup&apos;. If it&apos;s too soupy, add more dry mix until the desired consistency is achieved. For larger batches, a paint stirrer on a drill can be used, but for this small amount, a stick is sufficient. The correct consistency allows it to stick to the mixing stick when turned sideways, but still fall off a little.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mdOAajTvWrA</video:player_loc>
      <video:duration>131</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12396-3</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oaxMJ-3h8As/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Mortar Mix — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>In a wheelbarrow or mixing tub, combine approximately 3-4 parts sand with 1 part Portland cement. Mix these dry ingredients thoroughly with a shovel or trowel. Gradually add water, mixing continuously, until the mortar reaches a uniform, plastic consistency similar to stiff peanut butter. It should be pliable enough to work with a trowel but not too wet or soupy. The exact ratio of water will depend on the sand&apos;s moisture content and desired workability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oaxMJ-3h8As</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12397-1</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dG2E4Sf_Ot8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply New Mortar with Pointing Trowel — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Using a pointing trowel, scoop a manageable amount of mixed mortar and carefully apply it to the cleaned joints. The technique demonstrated involves sliding the mortar off the trowel and pushing it firmly into the joint. Ensure the mortar completely fills the void, packing it down tightly to prevent air pockets and ensure good adhesion. Work methodically along each joint. If working on a hot, sunny day, dampen the bricks slightly before application to prevent them from drawing too much water out of the mortar prematurely, which can lead to cracking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dG2E4Sf_Ot8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12397-2</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cWkgW6XIFJ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Point Up Brick Mortar Joints — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Using a small trowel or joint tool, carefully pack the prepared dark mortar into the joints around the reattached brick piece. Apply pressure to ensure the mortar fills all voids and creates a strong bond. Work the mortar into the joints until they are completely filled and flush with the brick surface. Do not wet the bricks before applying the mortar here, as the presenter notes it helps avoid a messy application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cWkgW6XIFJ8</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12397-3</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mdOAajTvWrA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Mortar to Joints — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Before applying mortar, place a piece of cardboard or similar protective material on the step below the one you are working on to catch any excess. If working on multiple steps, it&apos;s recommended to start from the top and work your way down. Use a trowel to scoop a small amount of the mixed mortar. Carefully work the mortar into the prepared cracks, pushing it back and forth with the trowel to ensure it fills the void completely. Don&apos;t worry if some excess gets onto the brick surface at this stage, as it will be cleaned later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mdOAajTvWrA</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12398-1</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6k4D76Q4h5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tool the Mortar Joints — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Once the mortar is in place, use a tooling stick or a jointing tool to shape and compress the mortar within the joints. This &apos;tooling&apos; process compacts the mortar, creating a durable and aesthetically pleasing concave or V-shaped joint. This step is crucial for achieving the characteristic, authentic appearance of traditionally laid brickwork.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6k4D76Q4h5w</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12398-2</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uRU-qPKMC7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tool and Finish Mortar Joints — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>After applying the mortar, wait until it is firm but not completely dry. This is the optimal time for tooling. Use a brick jointer (also known as a pointing tool) to shape the mortar joints. The jointer typically has different widths on each end (e.g., 1/2 inch and 3/8 inch). Choose the end that matches your existing mortar joint width. Firmly run the jointer along the fresh mortar, creating a smooth, concave joint. Don&apos;t worry about any excess mortar that pushes out onto the bricks; this will be cleaned later. The goal is to create a consistent, finished appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uRU-qPKMC7Q</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12398-3</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vqK5bkoOF9M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Point and Finish Mortar Joints — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>Once all the new bricks are laid and the mortar has started to firm up slightly (but is not fully set), use a pointing tool or brick jointer to create a uniform finish on the mortar joints. The presenter refers to this as &apos;tucking in&apos;. Press the tool firmly into the horizontal and vertical joints, smoothing and compacting the mortar. This step not only improves the aesthetic appearance but also compresses the mortar, making the joints more weather-resistant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vqK5bkoOF9M</video:player_loc>
      <video:duration>223</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12399-1</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fwINkg11CDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cure Mortar by Misting — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>After the tooling and finishing process, allow several hours for the mortar to further set. Once satisfied with the appearance after this initial drying, it is crucial to begin the curing process. This involves lightly misting the newly applied mortar with water using a spray bottle. For the lime mortar used in this video, light misting is required every now and then for approximately 48 hours. This slow, controlled hydration helps the mortar achieve its maximum strength and durability, preventing it from drying too quickly and developing cracks. As the mortar fully cures, its color will lighten over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fwINkg11CDg</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12399-2</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J87jjXzCAAA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cure and Final Clean — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>To facilitate the curing process of the new mortar, lightly sprinkle water over the entire patio surface. Ideally, you should cover the treated area with plastic sheeting immediately after sprinkling to force slow and even drying, which enhances the mortar&apos;s strength. However, if plastic sheeting is not available, plan to give the patio another light soaking the following day. Allow the mortar to cure for a minimum of two weeks before subjecting the patio to heavy use or a final pressure wash to remove any residual haze or dirt.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J87jjXzCAAA</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12399-3</loc>
    <lastmod>2026-11-13T23:37:12.971Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dVpr5SUlzrg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Base Mortar to Cure — How to Repair Loose Bricks on Front Steps</video:title>
      <video:description>After applying the base mortar, it is crucial to allow sufficient time for it to cure and harden. This drying period ensures the repair is stable and ready for the next layer of colored material. The actual drying time will depend on the mortar type, humidity, and temperature.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dVpr5SUlzrg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:37:12.971Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12390-1</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eMr5bs2re3M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Surface Preparation — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Before applying the LED strips, thoroughly clean the surface where they will be attached. Use rubbing alcohol and a clean cloth to wipe away any dust, dirt, or grease. A clean surface ensures proper adhesion of the LED strip&apos;s adhesive backing. Allow the surface to dry completely before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eMr5bs2re3M</video:player_loc>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12390-2</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/No8dhdlRXl0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Surface — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Before adhering the strip, thoroughly clean the surface where the lights will be installed. Use a cleaning solution, such as rubbing alcohol, and a clean cloth to wipe down the area. This is a critical step to ensure strong, long-lasting adhesion of the LED strip&apos;s backing. A clean, dry, and smooth surface will prevent the strip from peeling off prematurely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/No8dhdlRXl0</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12390-3</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eExOzHCYBDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Dry Surface — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Before adhering the light strip, thoroughly clean and dry the surface where it will be installed. Use a clean cloth to wipe down the surface, ensuring it is completely free of any dust, dirt, or oil contamination. This is crucial for the adhesive to bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eExOzHCYBDQ</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12391-1</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eMr5bs2re3M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install LED Strips — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Carefully unroll the LED strip lights. Peel off the protective backing from the adhesive strip, usually in sections as you go, and firmly press the LED strip onto the designated surface of the staircase. Ensure the strip is applied straight and evenly for a professional appearance. If the LED strip needs to turn corners, use appropriate connectors or carefully bend the strip, ensuring not to damage the LEDs or circuit board. For longer runs or sharp bends, soldering wires to jumper over gaps might be necessary, or specialized corner connectors can be used.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eMr5bs2re3M</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12391-2</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o06hfl0uvjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Flexible LED Strip Lighting — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Begin by planning the route for the flexible LED strip lights along the underside of each stair tread. The video demonstrates routing the warm white LED strip horizontally along the back edge of the tread, then curving it downwards around the side of the riser, and continuing under the subsequent tread. This creates a continuous flow of light. Secure the LED strips to the wooden substructure of the treads and risers. This can be done using the adhesive backing typically found on LED strips, or for a more robust attachment, use small mounting clips. Ensure that any connecting wires are discreetly managed and hidden within the staircase structure, possibly by drilling small, circular cutouts or channels in the risers to allow the strips or wires to pass through without being seen. The goal is to achieve a clean, uninterrupted light line along the underside of the treads. Finally, connect the LED strips to a suitable LED power supply/driver and an optional dimmer/controller, ensuring all electrical connections are safe and insulated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o06hfl0uvjg</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12391-3</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/29YXNPUOQmQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount LED Strips — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Carefully cut the addressable LED strips to the pre-determined length for each stair tread, using the marked cut points on the strips. For each stair, attach one LED strip to the underside of the step nosing (the protruding edge), ensuring the illuminated side faces outwards or downwards to cast light on the tread below. Use the adhesive backing on the strips, reinforced with mounting clips and small screws, for secure attachment. Route the power and data wires from each LED strip along the underside or side of the stair, directing them neatly towards the chosen location for the LED stair controller. For a professional finish, conceal all wires as much as possible by running them along stair stringers, underneath treads, or behind baseboards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/29YXNPUOQmQ</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12392-1</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hr5dsLEobs4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adhere LED Strips to Stair Treads — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Carefully peel back the protective cover from the adhesive backing of the LED strip light. Starting from one end of the stair tread, firmly press the LED strip onto the previously cleaned and dry underside of the tread. Work your way along the entire length of the tread, applying consistent pressure to ensure a strong, bubble-free bond. Ensure the strip is straight and positioned correctly for the desired lighting effect. Repeat this process for each stair tread requiring lighting, making sure each strip is securely attached.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hr5dsLEobs4</video:player_loc>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12392-2</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_lWAYR3ZkvY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Secure LED Fixtures — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Insert the pre-assembled LED lighting fixtures (often rigid LED strips within protective channels) into the grooves cut into the staircase. Ensure each fixture fits snugly and is aligned perfectly. Apply a suitable adhesive, such as silicone sealant (referred to as &apos;glass glue&apos; in the video), along the edges or back of the fixtures to permanently fix them in place. This step secures the lights for a seamless, integrated look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_lWAYR3ZkvY</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12392-3</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eMr5bs2re3M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install LED Strips — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Carefully unroll the LED strip lights. Peel off the protective backing from the adhesive strip, usually in sections as you go, and firmly press the LED strip onto the designated surface of the staircase. Ensure the strip is applied straight and evenly for a professional appearance. If the LED strip needs to turn corners, use appropriate connectors or carefully bend the strip, ensuring not to damage the LEDs or circuit board. For longer runs or sharp bends, soldering wires to jumper over gaps might be necessary, or specialized corner connectors can be used.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eMr5bs2re3M</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12393-1</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NnOuEnRqid8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test LED Lights — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>After the LED strip is fully attached, plug in the power supply for the LED lights. Turn on the lights briefly to confirm they are working correctly and emitting light. This quick check ensures that there are no faulty sections and that the adhesive has not compromised any connections. The video shows the lights illuminating in a blue/green color.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NnOuEnRqid8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12393-2</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/opaIAYPJZ_I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Assembled LED System — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>After all LED strip segments are securely connected to the T-connector, reconnect the entire assembled system to the power adapter and controller. Power on the lights and use the remote control or integrated controller to test different colors and brightness settings. This final test confirms that all connections are solid and the lights are functioning correctly throughout the branched setup.</video:description>
      <video:player_loc>https://www.youtube.com/embed/opaIAYPJZ_I</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12393-3</loc>
    <lastmod>2026-11-13T23:36:49.788Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uP1YC7XiZRs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Power Up and Test — How to Fix LED Strip Lights That Keep Falling Off the Stairs</video:title>
      <video:description>Once your strip lights are secured, attach the end of the LED strip to the controller. Then, connect the controller to the power adapter. Finally, plug the power adapter into an electrical outlet. Before using the remote control, remove the insulation sheet (plastic tab) from the battery compartment. After removing the sheet, you can press any color button on the remote control to change and test the lighting color, ensuring everything is working correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uP1YC7XiZRs</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-13T23:36:49.788Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12384-1</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Oeh7-r1XuIA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Damage and Plan Repair — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Begin by examining the carpet on the stair landing to identify the extent of the damage. Note any areas where the pattern (in this case, a chevron design) is misaligned from previous work, or where the carpet is bubbling. Observe the condition of adjacent carpeted steps, as severe wear or sun bleaching might make a perfect match difficult. For this specific repair, the installer identified existing pattern misalignment and a bubble from a prior repair. The plan is to replace the damaged section, ensuring the new patch&apos;s pattern aligns correctly with the existing carpet, and to hide the cross seam along the riser rather than the tread for a less noticeable finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Oeh7-r1XuIA</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12384-2</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Oeh7-r1XuIA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Damage and Remove Old Carpet — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Begin by closely examining the damaged carpet on the stair landing, noting the extent of the damage (e.g., stains, wear) and any imperfections from prior repairs, such as pattern misalignment or bubbles. Once the assessment is complete, use a utility knife to precisely cut around the perimeter of the damaged carpet section. Take care to cut cleanly through the carpet backing without damaging the underlying padding or subfloor. After cutting, carefully pull up and remove the damaged carpet piece, revealing the area where the new patch will be installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Oeh7-r1XuIA</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12384-3</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LN1JpXrtFdw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Carpet Condition — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Begin by walking through the carpeted area, specifically the hallway shown in the video, to observe the extent of the carpet&apos;s looseness. Note any significant wrinkles, buckles, or areas where the carpet is no longer taut against the floor. This initial assessment helps in understanding the scope of the repair needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LN1JpXrtFdw</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12385-1</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/obgNm0JDk0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum the Carpet — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Begin by thoroughly vacuuming the area of the existing carpet where the rug and underlay will be placed. This crucial step removes any dust, dirt, or debris that could prevent the anti-slip underlay from adhering effectively to the carpet surface. The video shows an upright vacuum cleaner, specifically a Sebo model, being used for this purpose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/obgNm0JDk0g</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12385-2</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BpwqU9L9NAw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Floor for Rug Placement — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Carefully move all furniture, including sofas, chairs, and coffee tables, out of the area where the new rug will be placed. Once the floor is clear, use a vacuum cleaner to thoroughly clean the entire surface. This removes dust, dirt, and debris, providing a clean foundation for the rug and preventing particles from getting trapped underneath, which could damage the rug or the floor over time. This preparation is crucial for the rug to lie flat and for maintaining hygiene.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BpwqU9L9NAw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12385-3</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ErwDpp3-sE8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Floor Surface — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>After the old rug has been removed, use a vacuum cleaner to thoroughly clean the exposed hard flooring underneath. This ensures that any dust, dirt, or debris is removed, providing a clean surface for the new rug to lie on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ErwDpp3-sE8</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12386-1</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZWI3eEp5ORk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Rug Shape and Size — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>The host provides the first tip: determine the appropriate shape and size for the rug. She advises matching the rug&apos;s shape to the entryway&apos;s shape. For her foyer, which is approximately 6x7 feet, she chose a square rug. She uses a tape measure to demonstrate measuring the space to ensure the rug fits well and complements the area without being too small or overwhelming.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZWI3eEp5ORk</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12386-2</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VQn-vS7Q2JQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measuring Entryway for Area Rug — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>The host uses a tape measure to carefully determine the dimensions of the entryway where the new area rug will be placed. The existing rug was approximately 11.5 feet long and 8.5 feet wide. These measurements are crucial for selecting a replacement rug of appropriate size to fit the space effectively and visually enhance the hall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VQn-vS7Q2JQ</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12386-3</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GTM-DN-Gs1s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Top Landing Dimensions — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>First, measure the overall width of the top landing. Extend the tape measure from one wall to the furthest point on the opposite side, including any baseboards or door frames. In this case, the width is 6 feet 6 inches. Next, measure the length of the top landing. From the edge of the first step, extend the tape measure to the furthest point, which may be a doorway or wall. In this video, the length is 6 feet. Record these measurements as &apos;Top Landing&apos; (TL) along with the pile direction (e.g., 6&apos;6&quot; x 6&apos; ↓). Always add extra material (e.g., 6 inches) to your exact measurements for cutting and tucking purposes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GTM-DN-Gs1s</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12387-1</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J-yXPpEDoIg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unroll and Position the Rug — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Begin by bringing the rolled-up area rug into the room where it is to be installed. Carefully unroll the rug, spreading it out over the floor. Ensure the rug is roughly centered and covers the primary area, leaving some overhang around the edges for later trimming. This initial placement is crucial for assessing how much material needs to be cut and where the rug will sit relative to the walls and fixed objects like desks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J-yXPpEDoIg</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12387-2</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MJ-rw4kSrpE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Rectangular Rug at Front Door — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Remove the old rug from the front door area. Unroll the new Ruggable rug pad onto the clean floor, ensuring the grippy side is facing down to prevent movement. Take the new rug cover (a light grey with dark lines design) and carefully unroll it over the rug pad, pressing firmly to adhere the two layers together. Make final adjustments to ensure the rug is properly aligned with the doorway and centered for an inviting entrance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MJ-rw4kSrpE</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12387-3</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ErwDpp3-sE8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position New Rug — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Unroll the new rug and carefully position it on the cleaned living room floor. Ensure it is centered and aligned with the furniture layout or the room&apos;s architecture. Smooth out any wrinkles or creases as you unroll it to achieve a flat, even surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ErwDpp3-sE8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12388-1</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DAJlEijm9tQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Rug — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>With the &quot;Carpet Anchor&quot; underlay securely in place, carefully unroll or lay your rug directly on top of it. Make sure the rug is properly centered and completely covers the entire underlay. The upward-facing hooks of the underlay will instantly engage with the backing of your rug, preventing any shifting, sliding, or migrating. The video demonstrates how the underlay firmly grips the rug, offering a secure and stable placement. Once the rug is laid, you can reposition any furniture over it, such as an ottoman, as shown in the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DAJlEijm9tQ</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12388-2</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5v5UpgSm7lk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Rug with Carpet Tape — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Once the rug is completely flat, the final step is to secure it to the floor to prevent future movement or curling. Use indoor carpet tape, which is a very sticky double-sided adhesive. Cut pieces of the tape and apply them to the underside of each corner of the rug, and optionally along the middle of each side. Leave the backing on the top side of the tape for now. Once all tape pieces are in place, carefully position the rug in its desired location in the room. Then, lift each corner or side where tape is applied, remove the protective backing from the tape, and firmly press the rug down onto the floor to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5v5UpgSm7lk</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12388-3</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5v5UpgSm7lk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Rug with Carpet Tape — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Once the rug is completely flat, the final step is to secure it to the floor to prevent future movement or curling. Use indoor carpet tape, which is a very sticky double-sided adhesive. Cut pieces of the tape and apply them to the underside of each corner of the rug, and optionally along the middle of each side. Leave the backing on the top side of the tape for now. Once all tape pieces are in place, carefully position the rug in its desired location in the room. Then, lift each corner or side where tape is applied, remove the protective backing from the tape, and firmly press the rug down onto the floor to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5v5UpgSm7lk</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12389-1</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FJ55PrLTYt4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Result — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Take a moment to visually inspect the entire carpeted area. Observe that all wrinkles and ripples have been successfully removed, leaving a smooth and taut surface. Confirm that all carpet edges are neatly tucked and secure, and that all transition strips are properly installed, flush with the adjacent flooring, and firmly fastened. The final shots in the video demonstrate this successful outcome, showing the dramatic improvement in the carpet&apos;s appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FJ55PrLTYt4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12389-2</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9cbE5MuDPNo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Detail Work — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>After all carpet is installed, stretched, and trimmed, visually inspect the entire area. Check all seams to ensure they are tight and virtually invisible. Examine transitions to other flooring types (like hardwood or existing carpet in a hallway) to confirm they are flush and secure. The installer shows the finished light gray carpet, highlighting the smooth transition to hardwood and the neat seam where it meets an existing brown carpet. He notes that the carpet sits flush with the hardwood due to the thickness of the carpet and proper installation techniques.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9cbE5MuDPNo</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12389-3</loc>
    <lastmod>2026-11-13T23:36:35.248Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LN1JpXrtFdw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Cleanup — How to Cover a Worn Landing Carpet with a Landing Rug</video:title>
      <video:description>Walk through the repaired area once more to confirm that all wrinkles and looseness have been eliminated and the carpet is uniformly taut. Check all edges to ensure they are properly tucked and secure. Collect all tools and dispose of any carpet trimmings or debris. The carpet should now be flat, smooth, and safe, significantly improving the room&apos;s appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LN1JpXrtFdw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:36:35.248Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12381-1</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vQfbdBaz_Mw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Risers — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Install the risers (2x8s) into the pre-cut stair stringers. Use a hammer to tap the risers firmly into place, ensuring a snug fit against the stringer. The bottom of the risers should be cut 1/8 inch shorter to allow for potential subfloor variations and prevent squeaking. Use a cordless drill with structural screws to secure the risers to the stringers. Apply leg pressure to hold the riser in place while driving the screw. Even if a screw misses, it can be removed and redriven without compromising the overall structure, demonstrating the flexibility of structural screws over nails.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vQfbdBaz_Mw</video:player_loc>
      <video:duration>156</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12381-2</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jcFMU29t2-U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Risers — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Measure the exact width of the vertical openings between each step tread. Using a circular saw, cut pieces of 1x8 treated lumber to these precise dimensions. These pieces will serve as the risers, covering the vertical gaps and completing the enclosed look of the steps. Fit each cut 1x8 piece into its respective vertical opening, ensuring it is flush with the underside of the step tread above it and the front of the step tread below it. Securely nail each riser board into the stringers and the underside of the treads using galvanized nails or deck screws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jcFMU29t2-U</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12381-3</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pCFsroLfTaI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Risers and Treads — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Begin by installing the riser boards. Cut each riser board to length and attach it vertically between the stringers, flush with the front of the step cutouts. Use construction adhesive on the stringer contact points and secure with screws. Once all risers are in place, install the tread boards. Again, apply construction adhesive to the top of the step cutouts and any intermediate supports. Use a scrap piece of wood as a spacer to ensure a consistent 1/4 inch overhang for each tread. Secure each tread board with screws (three screws per stringer was suggested for optimal security).</video:description>
      <video:player_loc>https://www.youtube.com/embed/pCFsroLfTaI</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12379-1</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LCtJqo2av64/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Establish Stair Base Support — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Once the stringers are securely attached to the deck, attention shifts to the base. If a small landing is part of the design, build a small frame (similar to deck framing) at the base of the stairs, ensuring it is level and properly sized. This frame will rest on the concrete footings. Secure the bottom ends of the stringers to this base frame using appropriate fasteners and connectors (e.g., hurricane ties or metal angles) to prevent movement. If no landing, the stringers&apos; bottom cut should rest directly on the footings or a treated wood plate anchored to the footings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LCtJqo2av64</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12379-2</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XS4NAqsoOyE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Anchor Stringer Base to Footing — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>To support the bottom end of the stringers, a wood plate is first anchored to the concrete footing. Begin by drilling appropriate pilot holes into the wood plate and then into the concrete footing. Secure the wood plate using heavy-duty screw anchors, such as the stainless steel Titan HD anchors, driven with an impact driver. Once the plate is secured, the stringer is fastened to this plate using Simpson Strong-Tie A23Z framing angles. These angles are attached with fasteners to both the stringer and the wood plate to create a strong, stable base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XS4NAqsoOyE</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12379-3</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qGE43pFPnkA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Supporting Boards and Secure Stringers — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Attach a pressure-treated 2x6 supporting board to the underside of the main deck frame where the stringers will attach. This provides a firm and stable surface for the stringers to rest against, as opposed to metal joist hangers. Carefully position the first (outer) stringer, ensuring it aligns correctly with the deck and rests squarely on the concrete landing. Screw it into place from the back of the supporting board with structural screws. Measure the spacing for the remaining stringers (e.g., 16 inches on center). Use a string line to ensure all stringers are perfectly square to the deck. Place spacer blocks between the stringers at the top and bottom to maintain even spacing. Install the middle stringer first by slotting a pressure-treated 2x4 (cut to size) into a pre-cut notch on the stringer&apos;s bottom and screwing it into the concrete landing using wedge anchors. Screw the remaining stringers to the supporting board and toenail them into the pressure-treated 2x4 at the base. Finally, screw on the decorative side pieces (skirt boards/trim boards) to cover the cut edges of the treads for a clean, finished look and added rigidity. These pieces are not structural but enhance aesthetics and lateral stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qGE43pFPnkA</video:player_loc>
      <video:duration>367</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12378-1</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PNeGtwOlfPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Stringers to Deck Frame — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>There are two primary methods for attaching the cut stringers to the deck frame. For &apos;inside mount&apos; stringers, position the stringers so that the top riser cut aligns flush with the last deck joist. Then, install horizontal blocking material between the deck joists at the attachment point and securely fasten the top of each stringer to this blocking using nails or screws. For &apos;outside mount&apos; stringers, you will first need to install a 2x material cleat to the bottom of the deck&apos;s rim joist. This cleat acts to extend the attachment surface. Once the cleat is in place, attach the stringers to it using heavy-duty angle brackets and appropriate fasteners. Regardless of the method chosen, ensure stringers are typically spaced 12 inches to 24 inches on center. Always confirm specific spacing and attachment requirements with your local building department, as codes can vary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PNeGtwOlfPw</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12378-2</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TDs-x0VPP5w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Stringers to Deck — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Before attaching the stringers, measure down from the top of the deck&apos;s rim joist by the calculated individual rise (e.g., 6 7/8 inches) and snap a chalk line along the rim joist. This line will serve as the top guide for all your stringers. Next, position each cut stringer against the deck&apos;s rim joist, aligning its top edge with the chalk line. Secure the stringers to the rim joist using metal connectors, often called stair stringer hangers. Drive appropriate screws through the pre-drilled holes in the connectors and into both the stringer and the rim joist using an impact driver, ensuring a strong and stable connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TDs-x0VPP5w</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12378-3</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LtZHN51tEQU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Stringers to Deck and Landing — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>To install the stringers, you first need to create a secure attachment point on the deck. Attach a 2x8 piece of lumber to the rim joist of your deck using appropriate fasteners. This 2x8 will serve as the primary attachment for the stringers. To ensure stability, brace this 2x8 to the beam or joist behind it, using joist hangers or strong decking screws. Next, position each stringer, holding it flush with the bottom of the deck&apos;s joist. Once in position, mark the locations where the stringer hangers will be placed. Secure the hangers to the deck&apos;s structure first, and then attach the stringers firmly to the inside of these hangers using screws or nails. To anchor the bottom of the steps to the concrete pad, attach wooden cleats between the stringers, making sure they sit firmly on the pad. Then, using a hammer drill, drill through the cleats and into the concrete pad. Insert anchor bolts into these drilled holes and tighten the nuts securely to lock the stringers in place on the landing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LtZHN51tEQU</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12380-1</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UNm4CxEU4aM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Treads — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Apply a bead of subfloor adhesive (Liquid Nails) to the top edges of the stringers where the treads will rest. This helps prevent squeaks and adds structural integrity. Place the cut treads (2x12 lumber) on top of the adhesive and stringers, ensuring they are flush with the nosing and securely fasten them with deck screws. For a cleaner look, use three screws per tread, strategically placed to minimize visibility.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UNm4CxEU4aM</video:player_loc>
      <video:duration>125</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12380-2</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-9JHagG_XyY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wooden Treads — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>After risers are installed, position the first wooden tread (a 2x12 pressure-treated board) onto the stringers. Ensure there is an even overhang, typically about half an inch, on both sides of the stringers. Use a combination square to mark a line down the center of each stringer on the tread&apos;s surface. These marks will serve as guides for fastening. Using the cordless drill and square head driver, secure the tread to the stringers with weather-resistant stainless steel screws, driving them through the tread into the stringers. Repeat this process for each subsequent tread, maintaining consistent overhang and proper alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-9JHagG_XyY</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12380-3</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0K-WWKcB2vY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attaching Tread Boards — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>With the stringers securely in place, it&apos;s time to attach the tread boards. Position the first tread board onto the top step of the stringers, ensuring a 1-inch overhang as planned. Use a cordless drill and appropriate deck screws to fasten the tread board securely to the stringers. Repeat this process for each step, ensuring each tread is evenly spaced and aligned. Once all tread boards are installed, the stairs are complete and ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0K-WWKcB2vY</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12382-1</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GI70mvXBIic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Railings and Balusters — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Once the stair stringers are installed, begin constructing the railings. Secure 4x4 posts to the deck using two carriage bolts per post. Ensure the maximum span allowed between posts adheres to local codes. For the main deck section, run the rails on the inside of the posts and secure the balusters to the outside of the rails. For the stairs and landing, the rails were run flush between the posts, with balusters positioned between the top and bottom rails. When installing balusters (typically 2x2s), always pre-drill holes to prevent splitting, as they tend to be brittle. The maximum allowable gap between balusters in most places is 4 inches; a 2x4 (which is actually 3.5 inches wide) can be used as a spacer to ensure compliance. Note that the last baluster in a run might require a different gap due to layout, but you can calculate exact spacing for equal gaps if desired.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GI70mvXBIic</video:player_loc>
      <video:duration>97</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12382-2</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PLRbzgrsuZQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Stairs, Railing, and Paint — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Install the cut stringers to the deck frame, securing them with wood screws and metal brackets. Next, install the stair treads (the horizontal walking surfaces) onto the stringers, making sure they are level and evenly spaced. Use wood screws to firmly attach each tread. For the railing, cut a 4x4 post to the appropriate height. Pre-drill holes into the post and the deck frame, then secure the post using lag bolts and an impact driver. For added stability, use longer lag bolts that penetrate deeper into the framing. Attach horizontal rails between the posts, ensuring they are level. Finally, install the balusters (vertical spindles) between the rails, using a spacer block to ensure consistent spacing and securing them with wood screws. The presenter chose to paint the entire deck and railing white for a clean, finished look. He mentions some minor imperfections in the railing posts, noting that experience helps improve alignment. He recommends painting last to cover all fasteners and wood imperfections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PLRbzgrsuZQ</video:player_loc>
      <video:duration>1028</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12382-3</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DsRSRliw3Ms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Stringers and Secure Lower Posts — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Install a 2x8 board directly below the deck joist where the stairs will attach; this provides a solid anchoring point. Secure the cut stringers to this 2x8 using metal stringer hangers and appropriate fasteners. Ensure the stringers and hangers are flush with the top of the 2x8. Next, attach the outer stringers to the previously installed newel posts at the bottom of the stairs. Drill pilot holes near the ends of the boards before driving screws to prevent splitting. Then, install any remaining interior stringers, securing them to the 2x8 at the top and to the footers at the bottom with suitable bracing, anchors, and carriage bolts, ensuring they are level and plumb.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DsRSRliw3Ms</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12383-1</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J4Pg0uZ_9Jw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Test and Inspection — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Once all structural components, treads, and risers are installed, conduct a thorough final inspection. Walk up and down the completed stairs several times, paying close attention to their feel. Check for any wobbling, squeaking, or unevenness. Ensure all connections are tight and secure. This &quot;final test&quot; confirms the stability, safety, and comfort of the newly built staircase. Any minor adjustments or final cosmetic touches, like sanding or preparing for finish coatings, would be addressed after this evaluation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J4Pg0uZ_9Jw</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12383-2</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2sonVhNnDkA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Up and Final Inspection — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>Use a leaf blower or broom to clear any sawdust, debris, or scattered materials from the work area, leaving it tidy. Conduct a thorough visual inspection of the new step, checking for any exposed fasteners, uneven edges, or missed details. Test the stability and feel of the step by walking up and down it, ensuring there is no movement or spring. Confirm that the new step seamlessly integrates with the existing deck and complements the house exterior.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2sonVhNnDkA</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12383-3</loc>
    <lastmod>2026-11-13T23:34:56.461Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0LqqMoWSwl0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Cleanup — How to Build Deck Stairs with Pre-Cut Stringers</video:title>
      <video:description>After all components are installed, perform a final visual and physical inspection of the stairs. Check for any loose boards, protruding fasteners, or uneven surfaces. Ensure the stairs feel solid and safe to use. Finally, clean up any debris, tools, and materials from the work site.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0LqqMoWSwl0</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:34:56.461Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12373-1</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ErwDpp3-sE8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Floor — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>After the old rug has been removed, thoroughly clean the exposed floor. Use a vacuum cleaner to remove any dust, dirt, or debris that may have accumulated underneath the rug. For hardwood or laminate floors, a quick sweep followed by vacuuming is usually sufficient.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ErwDpp3-sE8</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12373-2</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CLGk8Mmj1WQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum Rug Thoroughly — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>Before applying any cleaning solutions, thoroughly vacuum the rug. It&apos;s crucial to vacuum both the top and bottom of the rug multiple times to remove as much dry soil as possible. This step prevents dry soil from turning into mud once wet, making subsequent cleaning more effective. For shag or high-pile rugs, vacuuming in a 360-degree pattern ensures all sides of the fibers are cleaned.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CLGk8Mmj1WQ</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12373-3</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ErwDpp3-sE8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Floor Surface — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>After the old rug has been removed, use a vacuum cleaner to thoroughly clean the exposed hard flooring underneath. This ensures that any dust, dirt, or debris is removed, providing a clean surface for the new rug to lie on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ErwDpp3-sE8</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12374-1</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9ynkPdiDtH8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Weight to Hold Down the Rug — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>To maintain the flattened position of the rug while the conditioner penetrates and the fibers relax, the user places several heavy books directly on top of the section of the rug that was previously curled. The weight of the books presses the rug firmly against the floor, preventing it from curling back up. This weight should be left in place for an extended period, preferably overnight, to allow the conditioner to work its magic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9ynkPdiDtH8</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12374-2</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9ynkPdiDtH8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Weights and Verify Results — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>After the appropriate waiting period (usually overnight), the user removes the stack of books from the rug. They then lift the white towel from underneath the rug. The video clearly shows that the rug&apos;s edge, which was previously curled, is now perfectly flat against the hardwood floor. The user gives a thumbs-up gesture, confirming the success of the project.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9ynkPdiDtH8</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12375-1</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5v5UpgSm7lk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Rug with Carpet Tape — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>Once the rug is completely flat, the final step is to secure it to the floor to prevent future movement or curling. Use indoor carpet tape, which is a very sticky double-sided adhesive. Cut pieces of the tape and apply them to the underside of each corner of the rug, and optionally along the middle of each side. Leave the backing on the top side of the tape for now. Once all tape pieces are in place, carefully position the rug in its desired location in the room. Then, lift each corner or side where tape is applied, remove the protective backing from the tape, and firmly press the rug down onto the floor to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5v5UpgSm7lk</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12375-2</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5v5UpgSm7lk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Rug with Carpet Tape — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>Once the rug is completely flat, the final step is to secure it to the floor to prevent future movement or curling. Use indoor carpet tape, which is a very sticky double-sided adhesive. Cut pieces of the tape and apply them to the underside of each corner of the rug, and optionally along the middle of each side. Leave the backing on the top side of the tape for now. Once all tape pieces are in place, carefully position the rug in its desired location in the room. Then, lift each corner or side where tape is applied, remove the protective backing from the tape, and firmly press the rug down onto the floor to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5v5UpgSm7lk</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12375-3</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5v5UpgSm7lk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Rug with Carpet Tape — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>Once the rug is completely flat, the final step is to secure it to the floor to prevent future movement or curling. Use indoor carpet tape, which is a very sticky double-sided adhesive. Cut pieces of the tape and apply them to the underside of each corner of the rug, and optionally along the middle of each side. Leave the backing on the top side of the tape for now. Once all tape pieces are in place, carefully position the rug in its desired location in the room. Then, lift each corner or side where tape is applied, remove the protective backing from the tape, and firmly press the rug down onto the floor to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5v5UpgSm7lk</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12376-1</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5v5UpgSm7lk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Rug with Carpet Tape — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>Once the rug is completely flat, the final step is to secure it to the floor to prevent future movement or curling. Use indoor carpet tape, which is a very sticky double-sided adhesive. Cut pieces of the tape and apply them to the underside of each corner of the rug, and optionally along the middle of each side. Leave the backing on the top side of the tape for now. Once all tape pieces are in place, carefully position the rug in its desired location in the room. Then, lift each corner or side where tape is applied, remove the protective backing from the tape, and firmly press the rug down onto the floor to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5v5UpgSm7lk</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12376-2</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5v5UpgSm7lk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Rug with Carpet Tape — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>Once the rug is completely flat, the final step is to secure it to the floor to prevent future movement or curling. Use indoor carpet tape, which is a very sticky double-sided adhesive. Cut pieces of the tape and apply them to the underside of each corner of the rug, and optionally along the middle of each side. Leave the backing on the top side of the tape for now. Once all tape pieces are in place, carefully position the rug in its desired location in the room. Then, lift each corner or side where tape is applied, remove the protective backing from the tape, and firmly press the rug down onto the floor to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5v5UpgSm7lk</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12376-3</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5v5UpgSm7lk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Rug with Carpet Tape — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>Once the rug is completely flat, the final step is to secure it to the floor to prevent future movement or curling. Use indoor carpet tape, which is a very sticky double-sided adhesive. Cut pieces of the tape and apply them to the underside of each corner of the rug, and optionally along the middle of each side. Leave the backing on the top side of the tape for now. Once all tape pieces are in place, carefully position the rug in its desired location in the room. Then, lift each corner or side where tape is applied, remove the protective backing from the tape, and firmly press the rug down onto the floor to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5v5UpgSm7lk</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12377-1</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t_lMqOY1qlM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Rug Pad and Place the Rug — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>After cutting the rug pad to the appropriate size (one inch smaller than the rug on all sides), lay the rug pad flat on the desired area of your floor. Ensure it is smooth and free of wrinkles. Carefully unroll or place your area rug on top of the rug pad, aligning it so that the rug pad is centered beneath the rug. This setup ensures the rug lays flat, benefits from the pad&apos;s features like cushioning and non-slip properties, and reduces the likelihood of edge curling or tripping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t_lMqOY1qlM</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12377-2</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Kyi2GzF_Hfc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Down the Rug Pad — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>Before the main area rug is placed, a separate rug pad is brought out. This particular pad is black, suggesting it&apos;s designed for non-slip properties and to add an extra layer of cushioning underfoot. The presenter carefully unrolls the rug pad onto the hardwood floor, ensuring it lies flat and covers the approximate area where the main rug will eventually sit. This step is crucial for protecting the flooring, prolonging the life of the rug, and preventing it from shifting or bunching up.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Kyi2GzF_Hfc</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12377-3</loc>
    <lastmod>2026-11-13T23:34:23.562Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ON_mdtNRk_4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position the Rug Pad and Trim for a Custom Fit — How to Stop an Area Rug from Curling at the Corners</video:title>
      <video:description>Carefully position the felt rug pad on the hardwood floor where your 8x10 area rug will eventually lay. It&apos;s important to note that rug pad dimensions might not perfectly match the rug. In the video, the pad was slightly shorter on one side and slightly longer on another. Using a pair of fabric scissors, precisely trim any excess rug pad material that extends beyond the edges of the area rug. This ensures the rug lays flat and seamlessly over the pad without any visible overhang.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ON_mdtNRk_4</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-13T23:34:23.562Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12366-1</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VQn-vS7Q2JQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measuring Entryway for Area Rug — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>The host uses a tape measure to carefully determine the dimensions of the entryway where the new area rug will be placed. The existing rug was approximately 11.5 feet long and 8.5 feet wide. These measurements are crucial for selecting a replacement rug of appropriate size to fit the space effectively and visually enhance the hall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VQn-vS7Q2JQ</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12367-1</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nL3CKgh-MKI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Bedroom Bench — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>Introduce a long bench with a woven top and wooden frame. Position the bench at the foot of the bed. Note how its wood tone and woven texture complement the newly installed sideboard and area rug, adding cohesive design and extra seating in the bedroom.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nL3CKgh-MKI</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12367-2</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r0aELevGPI4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Provide Seating Solutions — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>Integrate seating into your entryway to improve functionality and comfort. Even a small stool or pouf can make a significant difference, providing a convenient spot to sit down, remove shoes, or briefly rest. For larger entryways, a bench can serve multiple purposes, offering seating, and often incorporating storage underneath. Seating can also be an opportunity to introduce a unique style statement, like a fun red stool in a contemporary space or an artistic chair in a traditional setting. Ensure the seating option fits the scale of the entryway and doesn&apos;t impede movement, often placing it against a wall, possibly below a gallery wall or mirror.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r0aELevGPI4</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12367-3</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-oTM4KWKLbk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Evaluate Window Bench Design for Outdoor Use — How to Style a Stair Landing with a Rug, Bench and Ar</video:title>
      <video:description>Direct attention to the long, upholstered bench situated by the window. Note its elongated, minimalist form and the sleek, metal legs. Although this specific bench is covered in velvet (an unsuitable outdoor material), its overall shape and low profile are excellent for an outdoor seating area. Consider designing an outdoor bench with similar clean lines and an elongated form using durable, weather-resistant wood like cedar, teak, or redwood. The slender leg design could be adapted using powder-coated metal or robust treated wood for stability and a modern aesthetic in an outdoor environment. Focus on how the simple yet elegant structure provides both seating and visual appeal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-oTM4KWKLbk</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12368-1</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8QvAWykyeiE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select and Arrange Core Wall Art Elements — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>Introduce the main piece of wall art that will anchor your composition. In this project, an existing painting featuring teal tones is selected, which will inspire the overall color scheme. Temporarily position this central art piece on the chosen focal wall, ensuring it is roughly centered and at an appropriate height above where the main seating (sofa) will be. This step is crucial for establishing the foundation of your wall art composition, providing a visual guide for integrating other repurposed items and decorative elements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8QvAWykyeiE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12368-2</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IH1Gdl0O6zU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Incorporate Artwork — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>Artwork is crucial for completing the room. The designer emphasizes combining antique and modern pieces for a rich, layered look rather than a single &apos;period piece&apos; feel. For the main wall, she measured the space to determine the ideal canvas size (approximately 40x40 inches). She opted for a modern abstract painting to provide a &apos;pop&apos; and contrast with the classical architectural details. Flanking this central modern piece, she placed four framed antique maps (engravings), whose black and white tones and lack of heavy texture complement the modern artwork without competing with it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IH1Gdl0O6zU</video:player_loc>
      <video:duration>131</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12368-3</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IH1Gdl0O6zU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Artwork — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>The third step involves adding artwork to the foyer. The designer stresses that artwork completes a room. She measured her wall space to determine the ideal canvas size for a large piece of modern art (approximately 40x40 inches) which would &apos;pop out&apos; and create a visual statement. To complement this, she incorporated four antique maps, framed in black and white, to flank the main painting. These antique maps provide character and contrast with the modern art while their subdued color palette prevents them from clashing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IH1Gdl0O6zU</video:player_loc>
      <video:duration>130</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12369-1</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Smooth Stairs — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>Before starting the installation, ensure that the existing stairs are thoroughly cleaned and smoothed. Use a broom to remove any dust, debris, or loose particles from the risers and treads. A clean and smooth surface is essential for proper adhesion and a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12369-2</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrLRY9adkN8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cleaning and Edge Preparation — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>Once sanding is complete, meticulously clean the stairs. First, use a paint scraper to remove any remnants of old paint, caulk, or debris from the edges where the treads meet the risers and walls. This ensures a clean line for painting. Next, use a shop vacuum with a brush attachment to thoroughly vacuum all stair surfaces, including crevices, to remove sanding dust. Finally, wipe down each tread and riser with a clean, damp cloth to pick up any lingering fine dust particles. Allow the wood to dry completely before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrLRY9adkN8</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12369-3</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Staircase — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>Before installing the carpet stair treads, thoroughly clean the entire staircase. Begin by sweeping all wooden steps to remove any loose dust, dirt, or debris. Once swept, use a damp cloth to wipe down each step and the front edge (riser/nose) to ensure no fine dust or residue remains. This creates a clean, smooth surface for the adhesive treads to bond effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12370-1</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RMUUVww8Vu0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Area Rug — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>With the rug pad in place, unroll the blue and white patterned area rug over it. This step is best performed with two people to ensure proper alignment and smooth laying without wrinkles. Carefully adjust the rug so it is centered and evenly covers the rug pad, especially underneath where the couch will sit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RMUUVww8Vu0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12370-2</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/obgNm0JDk0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position the Rug on Underlay — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>Take the rug and carefully unroll it over the exposed anti-slip underlay. Ensure that the rug is centered and completely covers the underlay, or that the underlay is discreetly positioned just inside the rug&apos;s edges. This step requires precision to avoid repositioning the rug after initial contact.</video:description>
      <video:player_loc>https://www.youtube.com/embed/obgNm0JDk0g</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12370-3</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ErwDpp3-sE8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position New Rug — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>Unroll the new rug and carefully position it on the cleaned living room floor. Ensure it is centered and aligned with the furniture layout or the room&apos;s architecture. Smooth out any wrinkles or creases as you unroll it to achieve a flat, even surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ErwDpp3-sE8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12371-1</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/L2pRENY4cU4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Decorate the Bench — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>After the bench is fully assembled, it is carefully moved and positioned in the designated entryway space. Before placing the bench, a black tray containing decorative pebbles, which was previously occupying the space, is removed to make room. Once the bench is in place, it is styled for both functionality and aesthetics. A woven basket is inserted into the open compartment beneath the main seat, providing storage for small items like hats or gloves. Various pairs of shoes are neatly arranged on the floor directly beneath the bottom shelf for organized storage. Finally, a decorative pillow and a soft throw blanket are placed on the main seating surface to enhance comfort and visual appeal, and a hat is placed in the basket, completing the organized and inviting entryway setup.</video:description>
      <video:player_loc>https://www.youtube.com/embed/L2pRENY4cU4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12371-2</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J2kYTeH_hiE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Positioning and Leveling Bench Sections — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>With the legs attached to the seat sections, the two large bench sections are carefully moved to the tree. The ground beneath where the legs will rest is dug out and leveled to ensure each bench leg rests on a stable, flat surface. This step is crucial for the overall stability and levelness of the finished bench. The goal is to avoid placing legs directly on large tree roots, which could cause instability or damage to the tree.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J2kYTeH_hiE</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12371-3</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OmyLxIfuA4E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place Bench and Organize Shoes — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>As the final step, the newly constructed and painted bench is carefully moved and placed into its intended location, an entryway or hallway. The builder demonstrates its practical functionality by neatly arranging several pairs of shoes underneath the bench. This showcases its dual purpose: providing a convenient seating option for putting on or taking off shoes, and serving as an efficient and organized storage solution for footwear, enhancing the tidiness and aesthetic appeal of the space.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OmyLxIfuA4E</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12372-1</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UK8fk4IPOs8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang Art at Eye-Level — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>To ensure your artwork is displayed optimally, aim to hang the center of the piece at eye-level, which is approximately 60 inches (5 feet) from the floor. This general rule makes the art easily viewable and integrated into the room. If your home has exceptionally high ceilings, you might adjust the height slightly higher to maintain scale. Additionally, if the art is hung near a door or window, try to align the top of the artwork with the top of the door or window frame, maintaining visual consistency.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UK8fk4IPOs8</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12372-2</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-0SkBjb1PgA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang Artwork — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>With the hanging hardware securely installed in the wall at the precisely marked and leveled points, carefully lift your artwork. Align the hanging points (sawtooth hangers or D-rings) on the back of the picture frame with the newly installed screws or hooks on the wall. Gently lower the artwork, ensuring both hanging points engage properly and securely with the hardware. Adjust slightly as needed to confirm the artwork is sitting flush against the wall and appears visually level and properly centered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-0SkBjb1PgA</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12372-3</loc>
    <lastmod>2026-11-13T23:33:00.486Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i54zCWw5eQc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Hanging Hardware and Mount Artwork — How to Style a Stair Landing with a Rug, Bench and Art</video:title>
      <video:description>For each marked spot, install appropriate hanging hardware. For lightweight artwork, a standard picture nail driven in at an angle might suffice. For heavier pieces or to ensure greater security, use drywall anchors specifically designed for hanging items, or locate a wall stud using a stud finder and drill directly into it. Once the hardware is securely in place, carefully lift each piece of artwork and hook it onto the installed hardware. Use a spirit level to verify that each piece is perfectly straight, making minor adjustments if necessary. The video transitions from showing artwork on the floor/leaning to being fully mounted on the walls, implying the completion of these hanging tasks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i54zCWw5eQc</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:33:00.486Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12359-1</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xwDTsfS5mYM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum Thoroughly — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>The first and most critical step is to thoroughly vacuum the carpet. This removes between 74% to 79% of the dry soil in the carpet before any wet cleaning begins. When choosing a vacuum, always opt for a corded model over a cordless one if available, as corded vacuums (e.g., drawing 1800 watts or more) are significantly more powerful than cordless ones (e.g., peaking at around 500 watts in boost mode). This extra power translates to stronger suction and a more aggressive brush, effectively pulling soil from deep within the carpet fibers. To ensure maximum soil removal, vacuum the room from north to south, then from east to west. Additionally, get down on your hands and knees to vacuum along baseboards and edges where dirt often accumulates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xwDTsfS5mYM</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12359-2</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hQV2yvs-2yc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Thoroughly Vacuum Carpet — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Using an upright vacuum cleaner, thoroughly vacuum all carpeted areas that will be cleaned. Pay special attention to high-traffic areas and edges. Utilize any available attachments on your vacuum cleaner to reach corners and along baseboards to ensure maximum dry soil removal. This initial dry vacuuming is crucial to prevent turning loose dirt into mud during the wet cleaning process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hQV2yvs-2yc</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12359-3</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GF8c79G91UM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum the Entire Carpet — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Start the carpet cleaning process by thoroughly vacuuming the entire area of the carpet. This crucial first step removes any loose dirt, dust, and debris from the surface and deep within the carpet fibers. Removing dry soil first prevents it from turning into mud once wet, making the subsequent cleaning more effective and preventing redistribution of dirt.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GF8c79G91UM</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12360-1</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OcYGVoleiik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-treat Stains and Spots — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Before proceeding with the deep clean, it&apos;s important to address any specific spots or stains. Select a carpet stain remover that is appropriate for your carpet type; examples shown include Simple Green Carpet, Vanish 3-in-1, and Krud Kutter Carpet Cleaner. First, always perform a colorfastness test in an inconspicuous area of your carpet (e.g., inside a closet or under a piece of furniture). Apply a small amount of the stain remover, let it sit for a few minutes, and then blot it with a clean white cloth or paper towel. If no color transfers from the carpet to the cloth, the product is safe to use. Then, apply the stain remover directly onto the visible stains as per the product&apos;s instructions. Gently blot the stain with a clean white cloth, working from the outside edge of the stain towards the center to avoid spreading it. Avoid scrubbing, as this can damage the carpet fibers or push the stain deeper into the carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OcYGVoleiik</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12360-2</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KuoOXtJbUzE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-Treat Stains and Heavily Soiled Areas — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Identify and pre-treat any visible stains or heavily soiled areas on the carpet. Apply an appropriate pre-treatment solution directly to these spots. For general dirt and grime, a carpet pre-spray can be applied to the entire carpet or just to heavily soiled paths. Allow the pre-treatment to dwell for the recommended time (usually 5-15 minutes) as specified by the product manufacturer, allowing it to break down stubborn dirt and stains. Avoid letting the solution dry on the carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KuoOXtJbUzE</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12360-3</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MfYlGQTLKns/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Carpet Pre-Treatment — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Begin by thoroughly spraying a specialized carpet cleaning pre-treatment solution directly onto the stained area. Ensure the entire stain is saturated, allowing the solution to penetrate the carpet fibers and begin breaking down the stain. This step is crucial for loosening tough grime and preparing it for mechanical agitation and extraction. Allow the solution to dwell for a few minutes as per product instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MfYlGQTLKns</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12361-1</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/os3Op41kyEE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Vinegar Cleaning Solution — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>While the baking soda is absorbing odors, prepare your DIY carpet cleaning solution. Take your empty spray bottle and carefully pour in equal parts of white vinegar and warm water. For instance, if you use one cup of white vinegar, add one cup of warm water. Secure the spray bottle cap and gently shake the bottle to thoroughly mix the two ingredients. This solution will be used to target specific stains and dirty spots.</video:description>
      <video:player_loc>https://www.youtube.com/embed/os3Op41kyEE</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12361-2</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KbIKljNhXy0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Cleaning Solution — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Begin by pouring approximately 6 cups of warm water into a large mixing bowl or basin. Next, carefully add just under 3 ounces of white vinegar. The vinegar acts as a powerful agent for breaking down dirt and neutralizing unpleasant odors embedded in the carpet. Finally, add 1 tablespoon of dish soap. Dish soap is essential for cutting through grease and grime. Stir all the ingredients thoroughly until they are well combined, creating a homogeneous cleaning solution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KbIKljNhXy0</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12361-3</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OEpPHltXdB4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Cleaning Solution to Carpet — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Before applying any liquid, ensure the carpet has been thoroughly vacuumed to remove all loose dirt and debris. Once the area is clear, take your prepared DIY carpet cleaning solution in the spray bottle. Hold the nozzle approximately 6 to 12 inches away from the carpet surface. Apply an even mist across the entire section you plan to clean. The goal is to dampen the carpet fibers without oversaturating them, allowing the solution to penetrate and begin breaking down embedded dirt and stains. Pay extra attention to high-traffic areas or visible stains, giving them a slightly more concentrated spray. Allow the solution to dwell for 2-3 minutes to work its magic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OEpPHltXdB4</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12362-1</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-QU5RlhJfvM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Liberally Apply Solution to Carpet Spot — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Visually locate the specific dirty or stained area on the carpet that requires spot treatment. Once identified, take the prepared DIY cleaning solution in the spray bottle and apply it generously directly onto the stain. Ensure the spot is fully saturated with the solution, allowing it to penetrate deep into the carpet fibers to begin dissolving and loosening the stain. Avoid oversaturating to prevent mildew or damage to carpet backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-QU5RlhJfvM</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12362-2</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OEpPHltXdB4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Cleaning Solution to Carpet — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Before applying any liquid, ensure the carpet has been thoroughly vacuumed to remove all loose dirt and debris. Once the area is clear, take your prepared DIY carpet cleaning solution in the spray bottle. Hold the nozzle approximately 6 to 12 inches away from the carpet surface. Apply an even mist across the entire section you plan to clean. The goal is to dampen the carpet fibers without oversaturating them, allowing the solution to penetrate and begin breaking down embedded dirt and stains. Pay extra attention to high-traffic areas or visible stains, giving them a slightly more concentrated spray. Allow the solution to dwell for 2-3 minutes to work its magic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OEpPHltXdB4</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12362-3</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wqGpVOQs0FI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Blot Excess Solution and Scrub Stains — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Once the 10-minute waiting period has passed, take a clean, dry paper towel (or a clean cloth) and firmly blot the stained areas. Press down to absorb as much of the excess cleaning solution and any lifted stain as possible. If you did not blot before, this is the time to start. Next, use a scrubbing tool, such as a green-colored scrubbing pad shown in the video, to gently scrub the stained sections of the carpet. Use a circular or back-and-forth motion, working from the outside of the stain inward to avoid spreading it further. Continue scrubbing until you observe the stains visibly diminishing or lifting from the carpet fibers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wqGpVOQs0FI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12363-1</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/n7PYfmGOvts/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Pat Dry — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>To rinse out the cleaning solution, lightly spray the treated carpet area with plain water from a spray bottle. Immediately follow by patting the area dry with a clean cloth or towel. This helps absorb the liquid and any lifted stain residue, preventing excessive moisture and foam buildup.</video:description>
      <video:player_loc>https://www.youtube.com/embed/n7PYfmGOvts</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12363-2</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZyrU8t1xhus/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Dry — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Once the stain is lifted, dampen a clean cloth with plain water (do not use more cleaning solution). Gently blot the treated area to rinse away any remaining cleaning solution. This step is important to prevent residue buildup, which can attract dirt in the future. After rinsing, use a dry, clean towel to blot the area thoroughly, absorbing as much moisture as possible. Finally, allow the carpet to air dry completely. You can speed up drying by placing a fan near the area or opening windows for ventilation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZyrU8t1xhus</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12363-3</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iU8oVOzYjlQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse with Vinegar Solution — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>With the vinegar rinsing solution ready, apply it to the area that was previously scrubbed with the detergent. Use a clean cloth or sponge, dampened with the vinegar solution, to gently wipe or blot the treated spot. The primary purpose of this step is to neutralize any remaining detergent residue, which is crucial because detergent left in the carpet or on the floor can act as a magnet for new dirt, causing the spot to reappear or darken over time. The vinegar also helps to eliminate odors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iU8oVOzYjlQ</video:player_loc>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12364-1</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OcYGVoleiik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Deodorize Carpet — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>To help the carpet dry as quickly as possible and prevent the growth of mold or mildew, open all windows and doors in the room to allow for maximum air circulation. You can also use fans to further enhance airflow and reduce drying time. It is very important to avoid walking on the carpet until it is completely dry, which can take several hours depending on environmental conditions (humidity, temperature). Walking on damp carpet can re-soil it, transfer dirt from shoes, or create new impressions. Once the carpet is thoroughly dry, consider applying a carpet deodorizer to neutralize any lingering odors. This can be a powder that you sprinkle and then vacuum up, or a spray application, leaving your carpet smelling fresh and clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OcYGVoleiik</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12364-2</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Uz_s3heIi4s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow the Carpet to Fully Dry — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>To facilitate quick drying and prevent potential mold or mildew growth, ventilate the cleaned room. Open windows or place air movers/fans (such as the XPOWER AM2400D shown in the video) strategically to increase airflow. Direct the air out of the recently cleaned, moist room into another area if possible. Avoid all foot traffic on the carpet until it is completely dry to prevent re-soiling or damage to the fibers. Once dry, perform a final inspection to ensure all stains are gone and the carpet is clean and fresh.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Uz_s3heIi4s</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12364-3</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hGmH-3mZhok/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Carpets to Dry Completely — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Once all carpeted areas have been vacuumed and steam cleaned, ensure proper ventilation by opening windows and using fans if possible. Avoid walking on the carpets until they are completely dry, which can take between 12 to 48 hours depending on humidity levels and the amount of moisture extracted. Inspect each room for any missed spots or remaining stains once fully dry. For best results, use a dehumidifier to speed up the drying process and prevent any musty odors or mildew growth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hGmH-3mZhok</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12365-1</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g90acF6n1i8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Vacuum for Fiber Pile — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Once the extraction process is complete and the carpet is as dry as possible, use a dry vacuum cleaner (or the vacuum function of your extractor if it&apos;s designed for dry use) to make a final pass over the carpet. This step helps to lift the carpet fibers that may have been matted down during cleaning, restoring their natural pile and giving the carpet a fresh, uniform appearance. Allow the carpet to air dry completely before use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g90acF6n1i8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12365-2</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/os3Op41kyEE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Vacuum Carpet — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Once you have scrubbed all the stained and dirty areas, allow the carpet to air dry completely. This step is essential; sufficient drying time prevents potential issues like mold, mildew, or a lingering damp smell. Depending on room ventilation and humidity levels, drying can take several hours. Once the carpet is thoroughly dry, use a vacuum cleaner to thoroughly vacuum the entire carpet. This final pass will remove all the dried baking soda, any remaining loosened dirt, and other residues, leaving your carpet deep-cleaned and refreshed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/os3Op41kyEE</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12365-3</loc>
    <lastmod>2026-11-13T23:31:14.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HiF8-bBKhjI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Post-Drying Vacuum — How to Deep Clean Carpet Without a Machine</video:title>
      <video:description>Once all carpeted areas have been cleaned and are completely dry, conduct a thorough visual inspection to ensure no spots were missed and the carpet texture is restored. If desired, or if any minuscule fibers or debris have surfaced during the drying process, perform a final quick vacuum pass. This last step perfects the appearance of the carpets, making them look and feel like new. The efficiency of the initial dry cleaning steps means less water was used during wet cleaning, leading to faster drying times and better results without the need for extraction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HiF8-bBKhjI</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-11-13T23:31:14.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12351-1</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iCHzvoIzB7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Stair Environment and Dog Comfort — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Begin by thoroughly inspecting your staircase to ensure it is safe and conducive for pet training. Look for any loose steps, sharp edges, or potential hazards. For dogs, especially smaller or older ones, slippery surfaces can be particularly dangerous. The video showcases a clean, well-maintained white staircase, suggesting a prepared and visually clear environment. Observe your dog&apos;s initial reaction to the stairs – do they show hesitation, fear, or curiosity? This initial assessment helps determine the starting point for training. Consider adding non-slip treads or carpet runners if your stairs are slick, to provide better traction and prevent slips. Ensure the area is free from clutter that could distract or injure your pet. The initial shot of the empty, clean staircase at the beginning of the video represents this preparatory phase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iCHzvoIzB7E</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12351-2</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/75le2GzCB4A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Observe Pet&apos;s Initial Stair Interaction — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Encourage the pet to approach and initiate descent down the staircase. As the dog approaches the first step, closely observe its posture, tail position, and eye movements. Note if there is any visible hesitation, such as the dog pausing, looking back, or showing uncertainty before placing a paw on the next step. This initial observation provides insight into the pet&apos;s general comfort level with the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/75le2GzCB4A</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12351-3</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/75le2GzCB4A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Monitor Descending Pace and Caution — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Once the pet starts to move down the stairs, pay close attention to its speed and fluidity of movement. Observe if the pet takes each step individually, pausing or appearing to test its footing, rather than moving smoothly. In the video, the dog exhibits a slow, cautious descent, stopping at various points. This deliberate movement, often accompanied by verbal encouragement, is a key indicator of potential difficulty or apprehension, suggesting the staircase may pose a safety risk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/75le2GzCB4A</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12352-1</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JS1W3Ns2Zgw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Measurements and Platform Design — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Begin by accurately measuring the total rise (vertical height) and run (horizontal depth) for the entire staircase. Design an initial landing platform strategically to prevent the stairs from encroaching into adjacent spaces, such as a hallway. It is crucial to ensure adequate head space above this landing. If the initial platform height results in insufficient head clearance, adjust its level accordingly. Additionally, consider designing the landing platform to be about 12 inches longer than strictly necessary for a 3-foot wide stair tread, as this extra length can simplify turns and reduce the need for complex custom cuts later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JS1W3Ns2Zgw</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12352-2</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nGs9ZKd-5Zg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stairs — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Measure the dimensions of your concrete stairs to determine the amount of lumber needed and to plan the layout of the new wooden structure. Measure the height of each riser and the length (tread depth) of each step. These measurements are crucial for cutting the wooden pieces accurately.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nGs9ZKd-5Zg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12352-3</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12353-1</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1d8pKy6371Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Main Plywood Ramp Section — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Lay the plywood sheet on a flat, stable surface. Using a tape measure and a pencil, mark the desired width for the main section of the ramp. Use a long straight edge (like a piece of wood) to draw a straight line along the marks. Carefully cut the plywood along this line using a circular saw to create the main ramp surface. Position the cut plywood against the bed to check the desired slope and mark where an angled cut is needed at the bottom to ensure it lies flat on the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1d8pKy6371Y</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12353-2</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zl1guOb_vWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Wood Planks and Leg Pieces — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Begin by cutting the main plywood planks for the ramp using a miter saw. Measure and cut two large pieces for the main ramp surface. Next, cut smaller, shorter pieces of wood to create the A-frame leg assembly. Precision in these initial cuts is important for the overall stability and appearance of the ramp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zl1guOb_vWI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12353-3</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UE7KCpA4ojQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Attach Plywood Panels for Sides and Ramp Surface — How to Help a Blind or Senior Dog Use the</video:title>
      <video:description>Cut plywood pieces to cover the long side of the ramp, the ramp surface itself, and the sides of the elevated platform. For the side panel that faces away from the bed, cut out a &apos;doorway&apos; and a small &apos;window&apos; using a track saw for straight lines and a jigsaw for corners and intricate cuts. Use wood glue and a brad nailer to attach these plywood panels securely to the wooden frame. The video notes that multiple pieces of plywood can be used for the ramp surface, as it will later be covered with carpet, making seams invisible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UE7KCpA4ojQ</video:player_loc>
      <video:duration>170</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12354-1</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3H5L3w4Q8sQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the Main Ramp Frame — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Take a 37-inch long 2x4 board and screw it securely underneath the top end of the prepared 2x6 boards to act as a cleat. Repeat this process at the bottom end of the ramp with another 37-inch long 2x4 cleat. Position two of the 2x6 boards along the outside edges of the ramp as runners. This creates the basic frame of the ramp, ensuring initial stability. The side runners are crucial for giving the ramp strength and will also help contain the dogs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3H5L3w4Q8sQ</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12354-2</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1d8pKy6371Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Main Ramp Frame with Middle Support — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Align the two angled 2x4 side supports with the edges of the main plywood ramp section. Using a drill and screws, firmly attach the plywood to the 2x4s, creating a sturdy base for the ramp. For additional stability, measure, cut, and screw a third 2x4 support piece across the middle of the ramp&apos;s underside, perpendicular to the main 2x4s.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1d8pKy6371Y</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12354-3</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zl1guOb_vWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Leg Supports and Attach to Main Plank — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Assemble the A-frame leg supports using cut wood pieces and wood screws. Ensure the angles are correct for the desired ramp height and slope. Next, measure the angle required for the ramp (as seen at 0:36-0:39), and use a drill to secure the leg assembly to the underside of the main plywood plank using screws. Apply wood glue to all contact surfaces before screwing to increase strength and stability. Use clamps to hold pieces in place while the glue sets and screws are driven.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zl1guOb_vWI</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12355-1</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6bPwOxybvaM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Anti-Slip Walking Surface — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>To provide traction and prevent slipping, especially in wet conditions, attach an anti-slip material to the ramp&apos;s walking surface. The video shows a black ribbed rubber matting. This can be secured using outdoor adhesive, staples, or small screws. Ensure the material covers the entire walking path and is firmly attached without any loose edges that could trip the dog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6bPwOxybvaM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12355-2</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gecSY1rzKig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Carpet for Traction — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Lay a piece of carpet, cut to the appropriate size, over the entire top surface of the ramp. Ensure the carpet is centered and lies flat without wrinkles or creases. Using a pneumatic staple gun, securely fasten the carpet to the wooden ramp. Begin stapling along the edges and work your way across the surface, ensuring there are enough staples to keep the carpet from shifting during use. This carpeted surface provides essential traction, making it safe and comfortable for your pet to walk up and down the ramp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gecSY1rzKig</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12355-3</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/94fbGzB6D_Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cover Ramp Surface with Fabric — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Take a large piece of sturdy, non-slip fabric (like upholstery or outdoor carpet material) and carefully staple it to the entire surface of the main ramp board. Ensure the fabric is taut and covers the board smoothly. You can also add a foam cushion underneath the fabric for extra softness, securing it with staples.</video:description>
      <video:player_loc>https://www.youtube.com/embed/94fbGzB6D_Y</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12356-1</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/20jjtuvaY6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Carpet Treads — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Starting from the bottom stair, carefully align the first carpet tread according to your predetermined placement (e.g., centered, with a consistent gap from the sides and front edge). Press down firmly, working from the center outwards, to ensure good contact between the adhesive and the stair surface. Apply pressure evenly across the entire surface of the tread. Repeat this process for each subsequent stair, moving upwards. Take your time to ensure each tread is straight and securely adhered. For added security, you can use a small roller or your hands to press down on the entire surface of each tread after placement. The video shows the Golden Retriever comfortably using the stairs, indicating the treads are securely installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/20jjtuvaY6M</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12356-2</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the First Tread — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12356-3</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GUPgiKVSfCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Up Ramps for House Access — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>For accessing house entryways with multiple steps, a long wooden plank or adapted ladder ramp can be used. Position the top end of the ramp so it mates perfectly with the last step or landing of the house, ensuring no gaps or bumps. If the ramp doesn&apos;t naturally sit flush, use a sturdy wooden block (e.g., a 3x4 or similar) underneath the ramp&apos;s end to adjust its height and create a smooth transition. For added stability and to prevent movement, especially with heavier power wheelchairs, consider securing the ramp by screwing it down to the house structure (if permissible for a temporary setup). Additionally, for longer ramps, place a &apos;trestle&apos; support (stacked wood or blocks) underneath the middle of the ramp to prevent sagging or folding under weight. If the ramp is placed on a grassy area, dig out a shallow trench to embed the bottom end of the ramp, which will prevent it from sliding backward during use and enhance safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GUPgiKVSfCw</video:player_loc>
      <video:duration>296</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12357-1</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vhM1aF2ULTw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Train Pets and Final Inspection — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>After the pet door and ramp system are installed, it&apos;s important to train the dogs to use them. This may involve encouraging them with treats or gentle guidance until they are comfortable with passing through the screen door flap and navigating the ramp. Continuous monitoring of the pet door&apos;s sealing capabilities and the ramp&apos;s condition is recommended. The creator mentions considering adding grip tape to the ramp if it becomes too slick in wet conditions, which can help prevent accidents and potential damage to the screen or pet door from frantic movements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vhM1aF2ULTw</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12357-2</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YkFhGdeDoP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Train Pet to Use Ramp — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Place the completed pet ramp against the bed. Demonstrate how the ramp functions, including the folding mechanism for storage and how the carpet can be easily removed or replaced. Train the pet to use the ramp by luring them with treats, encouraging them to confidently walk up and down.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YkFhGdeDoP8</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12357-3</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BE5wgujs7dM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Encourage and Guide Down the Stairs — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Position yourself at the bottom of the stairs and use a positive, encouraging tone to call your dog down. In the video, the owner is heard calling &apos;Pooh, come on!&apos; several times. You can use a favorite toy or a highly desired treat to entice your dog. Lure them by holding the treat a few steps down, encouraging them to take one step at a time. Reward them for each step or segment they successfully navigate. The video shows Pooh slowly and carefully descending the carpeted side of the stairs, responding to the owner&apos;s calls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BE5wgujs7dM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12358-1</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V9CQOgY9IBU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prioritize Maintenance and Safety — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>Regularly inspect and maintain your stairway, especially its structural components. Check for signs of insect damage, rot, or loosening fasteners. Address any issues promptly. Prioritizing the structural integrity of your stairway components, including posts and stringers, will minimize the risk of accidents and reduce the likelihood of costly repairs in the future. Remember that one weak structural component can compromise the entire structure&apos;s integrity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V9CQOgY9IBU</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12358-2</loc>
    <lastmod>2026-11-13T23:28:13.746Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8-gNBLqxaRI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair and Stabilize Wooden Accessibility Ramp — How to Help a Blind or Senior Dog Use the Stairs</video:title>
      <video:description>After clearing the area, thoroughly inspect the wooden accessibility ramp for any loose boards, railings, or structural connections. Using a cordless drill/driver equipped with appropriate screwdriver bits (e.g., Phillips or Square drive depending on the fastener type), carefully tighten all visible screws that appear to be loose or protruding. Pay close attention to the transition point where the ramp meets the main porch or landing. In this specific case, a noticeable &apos;lip&apos; or uneven height difference was present, which could cause a wheelchair to snag or tip. This lip needs to be addressed and secured, potentially by adding shims, adjusting existing boards, or reinforcing the connection, to ensure a smooth, seamless, and safe transition for wheelchairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8-gNBLqxaRI</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:28:13.746Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12346-1</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FhBDO5NRjgk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Attic Hatch Opening — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>The first practical step involves accurately measuring the dimensions of the attic hatch opening. The presenter is shown using a standard tape measure to determine the length and width of the wooden frame surrounding the attic access point. These measurements are crucial for ensuring the insulation box will fit snugly over the opening, effectively sealing off air leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FhBDO5NRjgk</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12346-2</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r3ImyaYa7jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Foam Board Insulation — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Using a tape measure, carefully measure the dimensions of your attic hatch panel. Once measured, cut multiple layers of rigid foam board insulation to fit the panel. It&apos;s important to leave a small gap around the edges (not too big, not too small) to allow the panel to fit back into the attic opening without obstruction while still providing maximum insulation coverage. The video demonstrates using 2-inch thick R-Matte Plus-3 foam board, which provides an R-value of 13.1 per inch, layering four pieces to achieve an R-value of 52.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r3ImyaYa7jg</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12346-3</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ysgmds2nJHs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Attic Hatch Opening — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Access the attic through the hatch. Using a reliable tape measure, carefully determine the exact dimensions (length and width) of the attic opening. It&apos;s crucial to measure the inside dimensions of the wooden frame that surrounds the opening. Also, observe the operation of the attic ladder mechanism, if present, to ensure the insulation cover will not interfere with its movement or closing. This measurement is critical for cutting the insulation boards to the correct size, ensuring a snug fit that prevents air leakage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ysgmds2nJHs</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12347-1</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yOTdiTyoQ_A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insulate Attic Hatch with Foam Board — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>The attic hatch is often a significant source of heat loss or gain. To address this, insulate the attic hatch cover to achieve an R-value of &quot;R-30&quot;. This is typically done by cutting foam board insulation (such as 2-inch thick Owens Corning Foamular R-10, which would require three layers for &quot;R-30&quot;) to the size of the hatch. Apply dabs of caulk or construction adhesive to the hatch cover, place the first layer of foam board, press firmly, then repeat for subsequent layers, sealing between layers with caulk for an airtight bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yOTdiTyoQ_A</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12347-2</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QM4SW5gGCuw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Foam Board — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Begin by accurately measuring the dimensions of your attic hatch opening. Using these measurements, transfer them onto a sheet of rigid foam insulation board. Score the foam board deeply with a utility knife against a straight edge, then snap or cut through the board to create two identically sized pieces that will fit snugly within the hatch frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QM4SW5gGCuw</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12347-3</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lSLIbuR5WqU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Insulated Panel — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Cut two layers of 2-inch foam board to the exact dimensions of your existing attic access cover (the plywood piece). Use double-sided duct tape to securely adhere these two foam board layers together. Then, using more double-sided duct tape, attach the combined foam layers to the attic-facing side of your original plywood attic access cover. This creates an insulated &apos;sandwich&apos; panel for the access opening. The speaker notes that you can add more layers of foam board if you desire a higher R-value (insulation value).</video:description>
      <video:player_loc>https://www.youtube.com/embed/lSLIbuR5WqU</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12348-1</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xahcgpj-KSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Weather Stripping — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Select a D-shaped, self-adhesive rubber weather strip. This type of weather strip has a flat base with a rounded &apos;D&apos; profile that will compress when the hatch is closed. Carefully peel back the adhesive backing and press the weather strip firmly onto the top surface of the wooden trim around the entire perimeter of the attic hatch opening. Do not stretch the weather strip during application; simply lay it down gently and press it into place to ensure proper adhesion and effective sealing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xahcgpj-KSI</video:player_loc>
      <video:duration>154</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12348-2</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r3ImyaYa7jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Weather Stripping — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Before installing weather stripping, identify the exact location where the attic hatch panel rests on the framing. Mark this spot if needed. Apply the 3/8-inch wide, 3/16-inch thick weather stripping around the entire lip of the attic opening frame, ensuring it creates a tight seal when the hatch panel is closed. This prevents air leakage, which is a major source of energy loss. Common signs of air leakage include spider webs around the hatch and discolored insulation above the panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r3ImyaYa7jg</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12348-3</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yOTdiTyoQ_A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Weatherstripping to Attic Hatch Frame — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>To complete the air sealing of the attic hatch, apply weatherstripping tape around the perimeter of the hatch frame. This ensures an airtight seal between the hatch cover and the frame when closed, preventing drafts and further air leakage into the conditioned space. The video shows a self-adhesive foam or rubber weatherstripping being applied to the frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yOTdiTyoQ_A</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12349-1</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iju5hUvR7f8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insulate the Attic Hatch Cover — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Following the presenter&apos;s advice for insulation, after the foam sealant has fully cured, the final step involves adding thermal insulation to the attic hatch cover itself. One common method is to cut pieces of rigid foam insulation (such as polyisocyanurate, XPS, or EPS foam board) to precisely fit the top surface of the attic hatch cover. Multiple layers can be glued together with foam-compatible construction adhesive to achieve a higher R-value, effectively preventing heat transfer. Another highly effective option is to install an &apos;attic tent&apos; or a specialized insulated attic stair cover kit, which typically consists of an insulated fabric or rigid box-like structure that sits over the entire hatch opening in the attic. These solutions provide a removable, insulated barrier and often come with built-in zippers or access points. Regardless of the method chosen, ensure that the added insulation does not impede the smooth opening and closing mechanism of the attic hatch or ladder.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iju5hUvR7f8</video:player_loc>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12349-2</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yOTdiTyoQ_A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insulate Attic Hatch with Foam Board — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>The attic hatch is often a significant source of heat loss or gain. To address this, insulate the attic hatch cover to achieve an R-value of &quot;R-30&quot;. This is typically done by cutting foam board insulation (such as 2-inch thick Owens Corning Foamular R-10, which would require three layers for &quot;R-30&quot;) to the size of the hatch. Apply dabs of caulk or construction adhesive to the hatch cover, place the first layer of foam board, press firmly, then repeat for subsequent layers, sealing between layers with caulk for an airtight bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yOTdiTyoQ_A</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12349-3</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r3ImyaYa7jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adhere Foam Board to Panel — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Apply a generous amount of foam board construction adhesive to the attic hatch panel. Carefully place the first layer of cut foam board onto the panel, pressing firmly to ensure good adhesion. Repeat this process for subsequent layers of foam board until the desired R-value is achieved. This step permanently &apos;marries&apos; the insulation to the panel, ensuring it stays in place for years, even with frequent attic access. To facilitate easier installation back into the attic opening, you can trim the very top edge of the assembled foam board stack slightly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r3ImyaYa7jg</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12350-1</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xahcgpj-KSI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Insulated Hatch Cover — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Carefully lift the assembled insulated attic hatch cover and place it back into the attic opening. The slightly undersized foam panels should allow it to fit without excessive force. Ensure the insulated cover sits squarely on the installed weather stripping. The weight of the foam layers will compress the weather stripping, creating a tight and effective air seal. This final installation completes the process, contributing to a more energy-efficient home by significantly reducing heat loss or gain through the attic hatch.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xahcgpj-KSI</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12350-2</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r3ImyaYa7jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Insulated Hatch Panel — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Carefully lift and place the newly insulated and sealed attic hatch panel back into its opening. Ensure it sits flush and creates a tight seal against the installed weather stripping. This completes the thermal and pressure boundary for your attic, significantly improving your home&apos;s energy efficiency and comfort. This project helps to make your home more comfortable by preventing unwanted heat transfer (hot in summer, cold in winter) through the attic hatch.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r3ImyaYa7jg</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12350-3</loc>
    <lastmod>2026-11-13T23:26:55.578Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r3ImyaYa7jg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Weather Stripping — How to Insulate and Weatherstrip an Attic Ladder Hatch</video:title>
      <video:description>Before installing weather stripping, identify the exact location where the attic hatch panel rests on the framing. Mark this spot if needed. Apply the 3/8-inch wide, 3/16-inch thick weather stripping around the entire lip of the attic opening frame, ensuring it creates a tight seal when the hatch panel is closed. This prevents air leakage, which is a major source of energy loss. Common signs of air leakage include spider webs around the hatch and discolored insulation above the panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r3ImyaYa7jg</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-13T23:26:55.578Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12338-1</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N4ndzFKGEiA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Light Layout and Mark Locations — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>With the initial component placements in mind, proceed to plan the exact layout for each light on your deck. Common installation spots include the riser of a stair; for this application, it&apos;s recommended to use a hooded light fixture that directs light downwards onto the stair tread, enhancing safety and visibility. Another popular choice is accent lighting directly on the deck surface. If opting for surface-mounted lights, strategically place them under a railing or in other areas that are out of the main traffic path to prevent tripping hazards and damage. Use a measuring tape and a marker to precisely mark each location where a light will be installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N4ndzFKGEiA</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12338-2</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2Syruvll4Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Light Placement — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Using a tape measure and a pencil, mark the precise placement for each step light on the stair riser or step board. It is crucial to avoid positioning the lights directly into stair joists to prevent structural damage and simplify installation. As a general guideline, builders typically space these lights three to four feet apart for optimal illumination and aesthetic appeal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2Syruvll4Y4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12338-3</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s9vqNUBmqeM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Light Placement and Mark Holes — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Before beginning the installation, assess the deck&apos;s structure and determine the desired spacing for the recessed lights along the deck steps. Use a tape measure to accurately measure and a pencil or marker to precisely mark each location where a light fixture will be installed. Ensure consistent spacing for a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s9vqNUBmqeM</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12339-1</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N4ndzFKGEiA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drill Holes for Lights — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Locate the first mark you made for a light&apos;s position. Before drilling, take a moment to double-check the precise placement and, crucially, ensure there are no obstructions (like deck joists, electrical lines, or plumbing) directly behind that spot where the drill bit will pass through. Once confirmed, take your cordless drill fitted with the paddle bit (which is typically included with the kit). Drill a straight hole all the way through the deck or riser material. It is essential to keep the drill perpendicular to the surface throughout the drilling process. If the hole is not straight, the light fixture may not sit properly or flush with the surface, potentially affecting its appearance and stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N4ndzFKGEiA</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12339-2</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/57ml2Xb7R1I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Individual Riser Lights — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Using a drill, create appropriately sized holes at each marked location on the stair risers. These holes should be large enough to accommodate the body of the individual decorator&apos;s riser lights. Once the holes are drilled, insert each light into its designated spot. Gently tap the lights into place using a rubber mallet to ensure a snug and flush fit. The lights typically come with a trim piece (available in white or black) which will cover the edges of the hole for a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/57ml2Xb7R1I</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12339-3</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1F0YY_91KPM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Drill Mounting Holes — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Once you are satisfied with the planned positions of the lights, use a pencil and a set square to mark the exact locations for drilling on the wood. If you removed the fascia board in the previous step, reattach it securely. Then, using a drill fitted with a 24mm wood drill bit, carefully drill the mounting holes at each marked position. These holes are for the light fittings themselves. Next, if you are installing lights on top of the deck, remove the relevant deck boards to access the structure underneath. Use the same 24mm wood drill bit to create holes in the joists or noggins directly beneath the deck board holes. These additional holes will allow for the cables to pass through the sub-structure, keeping them hidden and protected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1F0YY_91KPM</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12340-1</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2Syruvll4Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Run Power Wiring — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Begin by loosely running the wire from the main transformer to the location of the closest step light. From there, continue running the wire from one light location to the next, connecting them in series or parallel as per your lighting plan. At each step light location, ensure you leave an adequate loop of wire to allow for comfortable working space when making the electrical connections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2Syruvll4Y4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12340-2</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e5TERrSFC7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Low-Voltage Wiring and Test — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Continue connecting the low-voltage wiring for all the step lights, ensuring a continuous circuit back to the transformer. Use appropriate waterproof connectors for all junctions, especially where multiple light wires meet. At this stage, it&apos;s advisable to test the entire lighting system with a multimeter or by temporarily connecting it to a low-voltage transformer to ensure all lights are functioning correctly before permanently securing the remaining treads. Address any non-functioning lights or loose connections immediately.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e5TERrSFC7Q</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12340-3</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pn2Bh6dNP_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Low-Voltage Cable — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Unroll the low-voltage landscape lighting cable, which typically consists of two conductors, from its spool. Lay the cable along the planned route, ensuring it connects all your previously placed light fixtures. It&apos;s crucial to follow the contours of paths and keep the cable close to the edges of garden beds or structures. This minimizes the chance of the cable being accidentally cut or damaged during future gardening activities like planting or digging. The low-voltage nature of the cable (12 volts) makes it much safer to work with than line voltage systems.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pn2Bh6dNP_w</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12341-1</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VzOmsS2oIdI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount New Light Fixture — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Align the screw holes on the base of the new light fixture with the mounting bolts on the newly installed bracket. Carefully push the fixture flush against the wall and thread the decorative cap nuts onto the mounting bolts. Tighten these nuts by hand until the fixture is firmly secured to the wall, ensuring it doesn&apos;t wobble.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VzOmsS2oIdI</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12341-2</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b9v8rzvXW6w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Light Fixture — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Once all electrical connections are complete and securely fastened, gently tuck the connected wires into the junction box. Align the light fixture&apos;s base with the mounting holes on the bracket you installed in Step 2. Carefully push the fixture flush against the wall and secure it using the decorative screws or nuts provided by the manufacturer. Make sure the fixture is level before fully tightening these screws. Some fixtures may have a central screw, while others have screws on the sides.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b9v8rzvXW6w</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12342-1</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pn2Bh6dNP_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Make Wire Connections — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>At each light fixture location, you&apos;ll need to make connections. First, use wire strippers to carefully remove about 1/2 inch of insulation from the ends of the fixture&apos;s wires and the main low-voltage cable. Insert one exposed wire from the fixture and one exposed wire from the main cable into each side of a brass barrel connector. Use an Allen wrench to tighten the set screws on the connector, securing the wires in place. Repeat for the second conductor. To waterproof and protect these connections, slide a piece of heat shrink tubing over each brass barrel connector. Apply heat using a butane torch or heat gun until the tubing shrinks tightly around the connector, creating a sealed, waterproof joint that prevents corrosion and ensures long-term reliability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pn2Bh6dNP_w</video:player_loc>
      <video:duration>100</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12342-2</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TR3Jb_RlNeA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Wires with Waterproof Connectors — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>To connect the light fixtures to the main low-voltage wire, first strip the insulation from the ends of the wires using wire cutters or wire strippers. Then, use waterproof, gel-filled wiring connectors, specifically BVS 2 Snap Lock Connectors (or DBRY gel-filled connectors for splicing into existing lines), to create secure and weatherproof connections. These high-quality connectors are essential to prevent problems down the road that can arise from cheap, non-waterproof connections, such as electrical shorts or corrosion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TR3Jb_RlNeA</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12342-3</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2Syruvll4Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Wires with Waterproof Wire Nuts — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>For each connection, hold the two wires (one from the main run and one from the fixture) together at their stripped ends, ensuring the copper strands are even. Twist them together clockwise firmly, then twist a waterproof wire nut over the twisted wires until it is snug. Do not over-twist, as this can damage the wires. Repeat this process for the second set of wires for each fixture, ensuring you match the wire types (e.g., positive to positive, negative to negative). If desired, wipe away any excess silicone from the wire nuts and then wrap the connections with electrical tape to provide additional waterproofing and prevent movement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2Syruvll4Y4</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12343-1</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8VeYhRQt5hM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Transformer — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Now, connect the low-voltage wires from your lighting zones to the transformer. Start by splitting and stripping about 3/4 inch of insulation from the 12-gauge wire. Insert one exposed conductor into the &apos;common&apos; terminal of the transformer and tighten it securely with a screwdriver. Insert the other exposed conductor into one of the &apos;tap&apos; terminals. Transformers often have multiple taps (e.g., 12V, 13V, 14V, 15V) to compensate for voltage drop over longer wire runs or with more lights. For shorter runs (like the fire pit with four lights), the 12V tap is suitable. For longer runs (like the retaining wall with five lights), a higher voltage tap (e.g., 13V) can be used to ensure consistent brightness. Ensure all connections are tight. The transformer should be plugged into a GFCI outlet for safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8VeYhRQt5hM</video:player_loc>
      <video:duration>98</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12343-2</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IcpY0VM2KR0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Main Cable to Transformer — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>With all the lights connected to the main low-voltage cable, it&apos;s time to connect the main cable to the transformer. Position your transformer in the previously chosen location near a GFCI-protected outlet. Connect the ends of your main low-voltage cable to the designated terminals on the transformer, following the manufacturer&apos;s specific wiring instructions. These terminals are usually clearly marked for 12-volt output. Ensure the connections are tight and secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IcpY0VM2KR0</video:player_loc>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12343-3</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RDJ7bWVY9bM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Cable to Transformer — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Prepare the main landscape cable for connection to the digital transformer. Use a multi-tool to separate the two wires at the end of the cable, exposing about half an inch of copper by stripping the insulation. Twist each exposed wire tightly to prevent stray strands. For easier connection, curl the twisted copper wire to fit neatly around the terminal screws on the transformer. On the back of the transformer, you will find three taps: &apos;COM&apos; (common/neutral), &apos;12V&apos;, and &apos;15V&apos;. Connect one of the prepared wires to the &apos;COM&apos; tap. Connect the other prepared wire to either the &apos;12V&apos; or &apos;15V&apos; tap. The video creator chose the &apos;15V&apos; tap for a slightly higher voltage output, which is beneficial for longer cable runs or if you want brighter lights. Ensure the screws are tightened securely to establish good electrical contact.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RDJ7bWVY9bM</video:player_loc>
      <video:duration>111</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12344-1</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UQzpx0qx6OU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the Lighting System — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Before burying all the wires, turn on your transformer and test all the lights. Ensure every fixture is working correctly and producing the desired illumination. This is a critical step to identify and fix any loose connections or faulty bulbs before they are buried and harder to access. If you followed the recommendation to wire in sections, you would have already tested segments of your system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UQzpx0qx6OU</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12344-2</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kWtB8bqQlBg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Power and Test System — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>With all lights installed and wires pulled to the central junction point, connect the low-voltage lighting wires to a landscape lighting transformer. The transformer converts standard household current to a safer low voltage (typically 12V or 15V). Ensure all wire connections are waterproof using appropriate outdoor-rated connectors, such as silicone-filled wire nuts. Finally, plug the transformer into a GFCI (Ground Fault Circuit Interrupter) protected outdoor electrical outlet. Turn on the power and test all the lights to ensure they are working correctly. Make any final aesthetic adjustments to the lights or surrounding hardscape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kWtB8bqQlBg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12344-3</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CMErrTncakg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Lights and Make Adjustments — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Once all lights are connected, plug the transformer&apos;s power cord into a GFCI-protected outdoor outlet. Flip the main power switch on the transformer to the &apos;ON&apos; position. Verify that all installed accent lights illuminate. If a light does not turn on, recheck its connection to the main cable and ensure the bulb is properly seated. During daylight, adjust the angle and position of each light to achieve the desired illumination effect. Final fine-tuning of the light angles should be done after dark for the best results.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CMErrTncakg</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12345-1</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ajeAQfJmcsM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure and Route Wiring — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>Once all light fixtures are connected and mounted, neatly route the main low-voltage power cable and the connection wires to hide them and prevent them from being snagged or damaged. Use zip ties to secure the cables to the underside of the deck structure, keeping them taut and out of sight. After securing each section of cable with a zip tie, use a pair of pliers to trim off any excess zip tie material for a clean and professional appearance. The video shows the user securing cables with zip ties and then cutting the ends.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ajeAQfJmcsM</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12345-2</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/29YXNPUOQmQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Conceal and Finish — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>After confirming that the motion-activated stair lighting system operates perfectly to your satisfaction, proceed with the final aesthetic steps of concealment and tidying. Use cable ties, wire clips, or conduit to neatly bundle and secure any remaining visible wiring, preventing tripping hazards and contributing to a professional appearance. If not already completed, fully hide all electrical wires, the controller box, and the power supply unit. This can be achieved using decorative trim, specialized wire covers, or even by patching and painting over recessed wiring channels to seamlessly integrate them into the staircase and wall structure. Ensure that the motion sensors remain completely unobstructed and are not accidentally covered, as this would impair their functionality.</video:description>
      <video:player_loc>https://www.youtube.com/embed/29YXNPUOQmQ</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12345-3</loc>
    <lastmod>2026-11-13T23:26:28.132Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V1QNXzoFGho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalize Installation and Wire Management — How to Install Low-Voltage Deck Stair Lights</video:title>
      <video:description>After connecting the main landscape wire to the transformer, plug the transformer into the outdoor outlet. Activate the appropriate zone on the transformer (e.g., Zone 1) to power on the lights and verify that all installed path lights are working correctly. Once confirmed, begin tidying the wiring. Use staples to secure the main landscape wire along the underside of the deck or other structural elements, keeping it neat and out of sight. For sections running through garden beds or along paths, carefully bury the wire under mulch, gravel, or soil to conceal it. The presenter mentions that eventually, lattice will cover the exposed wire under the deck for a completely hidden look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V1QNXzoFGho</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-13T23:26:28.132Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12331-1</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xIXxnGFtaNI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Placement and Mark Handrail Height — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Begin by deciding which side of the staircase the handrail will be installed on. Using a level and a pencil, mark the desired height for the handrail on the wall. Building code requirements typically mandate a handrail height between a 34-inch minimum and a 38-inch maximum, measured from the tread nosing to the top of the rail. For this project, a height of 36 inches is chosen as it falls within the acceptable range. When marking, account for the height of the mounting brackets and the thickness of the handrail itself to ensure the top surface of the finished rail is at the intended height.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xIXxnGFtaNI</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12331-2</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NotkCkSVUDM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Building Codes and Mark Handrail Height — How to Install a Wall-Mounted Handrail on Stair</video:title>
      <video:description>Begin by understanding the necessity of a handrail based on local building codes. The video mentions that stairways with a rise of more than 30 or 36 inches typically require a handrail. Identify a suitable, flat wall section for installation; avoid walls with complex or stepped profiles. Research and confirm the required handrail height according to your local building codes. The video references the 2018 IRC Section 311.7 R311.7.8.1 Height, which specifies handrail height between 34 and 38 inches (864-965 mm) above the front edge of the step, measured vertically from the sloped plane adjoining the tread nosing. Mark this required height (e.g., 35 inches as chosen in the video) above the nose of each step using blue painter&apos;s tape and a ruler or tape measure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NotkCkSVUDM</video:player_loc>
      <video:duration>85</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12331-3</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XnAkyCyrb_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Handrail Height — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Handrails should generally be installed 34 to 38 inches above the steps. To accurately mark the height, first, identify the &apos;nosing&apos; of the steps, which is the front edge of each tread. For the top landing and the first step, measure 36 inches (or your desired height within the recommended range) vertically from the nosing. Use a level to ensure the measurement is plumb. Mark these points on the wall with a pencil. To make these marks more visible and prevent them from being accidentally erased, place a small piece of blue tape over each mark.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XnAkyCyrb_w</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12332-1</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2FXjeFnn_EE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Find Stud Locations — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Before mounting any brackets, it is crucial to locate the wall studs. Use a stud finder to scan the wall along the path of your string line. Mark the center of each stud with a pencil. This step ensures that the handrail brackets will be securely fastened into solid wood framing, providing the necessary strength and stability for the handrail.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2FXjeFnn_EE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12332-2</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XnAkyCyrb_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Mark Studs for Brackets — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Using a magnetic stud finder, slide it along the wall to locate the hidden wall studs. When the stud finder &apos;sticks&apos; or indicates a stud, use a pencil to mark the center of the stud. Repeat this process for all required stud locations along the path of the handrail. The number of studs you need to locate depends on the length of your handrail and the number of brackets provided. For example, a 3-foot handrail typically uses two brackets, so you would need to find two studs. Mark the location of each stud on the wall, preferably below the string line, for later bracket installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XnAkyCyrb_w</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12332-3</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DF7IERjPsTg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate Wall Studs for Secure Mounting — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Before drilling, use a stud finder to locate a wall stud for at least one of the handrail brackets, preferably the top one, to ensure maximum support. If the exterior siding (like wood siding) prevents accurate stud finding, locate the stud from the interior wall and transfer the measurement to the exterior. Mark the center of the stud on the wall. For the other bracket, if a stud isn&apos;t available, alternative anchors will be used.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DF7IERjPsTg</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12333-1</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XnAkyCyrb_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Mark Studs for Brackets — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Using a magnetic stud finder, slide it along the wall to locate the hidden wall studs. When the stud finder &apos;sticks&apos; or indicates a stud, use a pencil to mark the center of the stud. Repeat this process for all required stud locations along the path of the handrail. The number of studs you need to locate depends on the length of your handrail and the number of brackets provided. For example, a 3-foot handrail typically uses two brackets, so you would need to find two studs. Mark the location of each stud on the wall, preferably below the string line, for later bracket installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XnAkyCyrb_w</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12333-2</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A8iOnOaiODc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Handrail Brackets (Wood Studs) — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Measure the height of your handrail material (e.g., 1 inch as shown). From the chalk line previously marked on the wall, measure down this height and make a light mark. This mark indicates where the top edge of your bracket will align. Using a stud finder, carefully locate the vertical studs within the wall along the handrail&apos;s path. Mark the center of each stud where a bracket will be placed. Position a handrail bracket against the wall, aligning its top edge with the mark you made below the chalk line, and centering it over a detected stud. Mark the screw holes of the bracket onto the wall with a pencil. Using an electric drill and a pilot hole drill bit that is 1/8 inch smaller than the diameter of your wood screws/bolts, drill pilot holes at the marked locations. Finally, insert the wood screws or wood bolts through the bracket and into the pilot holes, securing the bracket to the wall. Do not fully tighten the screws yet; allow the bracket to swivel slightly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A8iOnOaiODc</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12333-3</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ar9Jx53h37U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Top Bracket Location — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Move to the top of the staircase and repeat the measuring process to mark the location for the top bracket. Use the same method of measuring from the stair tread nose and accounting for the handrail and bracket height. Adjust the horizontal position of this mark to ensure it aligns with an available wall stud. If the initial alignment doesn&apos;t match a stud, shift to an adjacent stud and recalculate the required height from that stud&apos;s location to maintain the overall slope and height consistency of the handrail. Once a suitable stud is found, mark the bottom of the top bracket&apos;s position on the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ar9Jx53h37U</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12334-1</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BhPubtIDjfk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drill Pilot Holes — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Using your power drill equipped with the selected drill bit, carefully drill pilot holes into the wall at each marked screw position. Hold the drill steady and perpendicular to the wall to ensure straight holes. Drill to a depth that is slightly longer than the length of your wall plugs, to ensure they can be inserted fully without hitting the back of the hole.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BhPubtIDjfk</video:player_loc>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12334-2</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cZVF50KD4ao/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drill Pilot Holes — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Once the mounting points are accurately marked, use a drill with a small drill bit (slightly narrower than the screws) to create pilot holes at each marked location. Drilling pilot holes prevents the wood from splitting when the screws are driven in, especially in hardwood or laminate materials, and ensures a clean, secure attachment for the mounting brackets. Remember to wear safety glasses during drilling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cZVF50KD4ao</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12334-3</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Vnaby7COo3Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drill Pilot Holes — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>After marking, select an appropriate drill bit for your chosen fastener. The drill bit should have a diameter slightly smaller than the core of the screw (not including the threads) to allow the screw threads to grip the wood effectively without splitting it. Attach the drill bit to a hammer drill (or standard drill) and carefully drill a pilot hole through the marked spot. Ensure the drill is held perpendicular to the wood surface for a straight hole, which is crucial for a strong connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Vnaby7COo3Q</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12335-1</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WxMxUtG2L64/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mounting the Bracket to the Wall — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Once the pilot holes are drilled in the bracket components, it&apos;s time to attach the completed bracket to the wall. Position the bracket at the desired height on a sturdy wall surface, ideally into wall studs or blocking. Use an impact driver to drive appropriate wood screws through the pre-drilled holes in the bracket and into the wall, ensuring a strong and secure attachment. Repeat this process for all brackets needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WxMxUtG2L64</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12335-2</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WxMxUtG2L64/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mounting the Bracket to the Wall — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Once the pilot holes are drilled in the bracket components, it&apos;s time to attach the completed bracket to the wall. Position the bracket at the desired height on a sturdy wall surface, ideally into wall studs or blocking. Use an impact driver to drive appropriate wood screws through the pre-drilled holes in the bracket and into the wall, ensuring a strong and secure attachment. Repeat this process for all brackets needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WxMxUtG2L64</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12335-3</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WxMxUtG2L64/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mounting the Bracket to the Wall — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Once the pilot holes are drilled in the bracket components, it&apos;s time to attach the completed bracket to the wall. Position the bracket at the desired height on a sturdy wall surface, ideally into wall studs or blocking. Use an impact driver to drive appropriate wood screws through the pre-drilled holes in the bracket and into the wall, ensuring a strong and secure attachment. Repeat this process for all brackets needed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WxMxUtG2L64</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12336-1</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A8iOnOaiODc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Handrail to Brackets — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>With the brackets loosely installed, carefully lift the handrail and place it onto the brackets, aligning it with the marked chalk line. It is highly recommended to have an assistant to help hold the handrail firmly in place during this step. Once the handrail is resting securely on the brackets, use the self-tapping screws provided to fasten the handrail to each bracket. If you find it difficult to apply enough pressure for the self-tapping screws to bite into the metal handrail, pre-drill a small pilot hole through the handrail material (using a drill bit 1/16 inch smaller than the screw diameter) before driving the self-tapping screw. Ensure all screws are fully tightened, making the handrail sturdy and secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A8iOnOaiODc</video:player_loc>
      <video:duration>104</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12336-2</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2FXjeFnn_EE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Handrail to Brackets — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Position the handrail onto the freshly installed brackets. The video demonstrates using clamps to temporarily hold the handrail in place while it is being secured. This helps maintain the desired gap and alignment. Use a cordless drill/driver to screw the handrail onto the brackets from underneath or through designated holes. It is important to ensure a 1 1/2 inch gap between the wall and the handrail, as this is a common building code requirement for graspability. Always check local building codes for specific requirements in your area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2FXjeFnn_EE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12336-3</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xIXxnGFtaNI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Handrail to Brackets — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Align the prepared handrail with the installed end brackets. Mount the handrail to these end brackets first, ensuring a snug and secure fit. Use a drill to drive screws through the brackets and into the handrail, making sure they are firmly attached. Once the ends are secured, proceed to install any additional center brackets along the length of the handrail, aligning them with studs and then attaching the handrail to these central brackets as well. This provides continuous support and stability for the entire handrail.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xIXxnGFtaNI</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12337-1</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4e4uiXMyVJk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Handrail Strength Test — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>Have someone push and pull on the installed handrail to test its stability. This &apos;shake-a-roo&apos; test helps to ensure that all fasteners are securely in place and that the railing can withstand typical forces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4e4uiXMyVJk</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12337-2</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rhN2wW8GVkI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Handrail Installation and Stability Check — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>With the handrail and its returns fully assembled and the glue dry, align the entire handrail unit with the previously installed brackets on the wall. Carefully secure the handrail to each bracket using the appropriate screws, ensuring all connections are tight. Confirm that the handrail returns sit flush against the wall. Once all brackets are fastened, perform a thorough stability check by gripping and applying firm pressure to various points along the handrail. The handrail should feel solid and not wobble or flex. If any movement is detected, re-tighten fasteners or consider adding more support.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rhN2wW8GVkI</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12337-3</loc>
    <lastmod>2026-11-13T23:22:02.193Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wqY16lY-cLw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Handrail Installation — How to Install a Wall-Mounted Handrail on Stairs</video:title>
      <video:description>After the handrail has been cut and thoroughly sanded, re-attach it to all the previously installed handrail brackets using the appropriate screws. Once securely fastened, perform a final stability check by firmly gripping and applying pressure to the handrail along its entire length. Ensure it is &quot;rock solid&quot; and does not move or flex, providing reliable and safe support.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wqY16lY-cLw</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:22:02.193Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12325-1</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HMsjWuSphdU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Damaged Area — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Begin by cleaning the damaged area of the wall. Using a damp sponge mop, wipe away any loose debris, dust, or dirt from the hole and surrounding wall surface. This ensures proper adhesion of the patching compound.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HMsjWuSphdU</video:player_loc>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12325-2</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t5MRbXH3Clg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Around the Hole — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Before beginning the repair, ensure the area around the hole is clean and free of dust or debris. Use a clean rag or cloth to wipe down the surface, preparing it for the patch and spackling compound.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t5MRbXH3Clg</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12325-3</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PfjuXSRKKQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Surface — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Once sanding is complete, take a damp sponge and thoroughly wipe down the entire repair area. This step is crucial for removing all sanding dust, loose particles, and any other debris, ensuring a clean and optimal surface for the patching compound to bond effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PfjuXSRKKQY</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12326-1</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iWNNn0SxUC8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Spackling Compound — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>The host first lightly sands the immediate area around the imperfection, which can help in cleaning and providing some tooth for the spackle to adhere to. Then, using a putty knife, she scoops a small amount of spackling compound from its container. She applies the compound directly over the screw pop or dent, ensuring it fully fills the void. The technique involves spreading the spackle with multiple passes, feathering the edges thin so that the patch blends seamlessly with the existing wall surface and leaves no noticeable ridges.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iWNNn0SxUC8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12326-2</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sb-1LTBuhQw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Spackle to Imperfections — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Take a small amount of spackling compound onto the edge of a putty knife or flexible spreader. Firmly press the spackle into the ding or hole, ensuring it fills the entire void. Then, smooth the spackle flush with the surrounding wall surface using the putty knife, feathering out the edges to create a seamless transition. For deeper imperfections, multiple thin coats may be necessary to prevent cracking, allowing each coat to dry before applying the next.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sb-1LTBuhQw</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12326-3</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/paxjcEB3ItQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Spackling Small Holes — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>For small dings and dents, scrape away loose debris. Apply lightweight spackling over the hole and let it dry. Add more spackling if necessary, then sand smooth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/paxjcEB3ItQ</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12327-1</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iWNNn0SxUC8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Spackling Compound to Dry — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>After applying the spackling compound, it is crucial to allow sufficient time for it to dry thoroughly. The video indicates a minimum drying time of 30 minutes, or even longer depending on the thickness of the application and humidity levels. The specific spackling compound used in the video changes color from pink when wet to white when dry, providing a visual indicator that it&apos;s ready for the next step. Not all spackling compounds have this feature, so always refer to the product&apos;s instructions for drying times.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iWNNn0SxUC8</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12327-2</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Sb-1LTBuhQw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Spackle to Dry — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Allow the spackling compound to dry thoroughly according to the manufacturer&apos;s instructions. Drying times can vary significantly based on the product type (e.g., lightweight spackle dries faster), the thickness of the application, and environmental conditions such as humidity and temperature. For the pink spackle shown in the video, it&apos;s common for it to change color (e.g., from pink to white) when fully dry, providing a visual cue. Ensure adequate ventilation in the area to aid in the drying process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Sb-1LTBuhQw</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12327-3</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/199W-QuR8kE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Spackle to Dry Completely — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Once the spackle is applied, it is crucial to allow it ample time to dry. The drying time can vary significantly based on the type of spackle used (lightweight spackle dries faster than standard), the size and depth of the hole, and the ambient humidity and temperature. Generally, this can range from 30 minutes to several hours. For best results, consult the spackle manufacturer&apos;s instructions on the product packaging. Avoid touching or disturbing the spackle during this period. Some spackle types, like DAP DryDex, change color (e.g., from pink to white) when fully dry, indicating it&apos;s ready for the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/199W-QuR8kE</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12328-1</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oMLegIssD04/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand the Repaired Area Smooth — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Once the spackling compound has dried (it will typically turn white when dry, though this color change isn&apos;t explicitly shown in the short clip, it&apos;s implied by the subsequent step), use a sanding block to sand the repaired area. Sand gently in a circular or back-and-forth motion until the surface is smooth and flush with the rest of the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oMLegIssD04</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12328-2</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QEZ0iY8oME4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Clean the Repaired Area — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Once the spackling compound is completely dry, use a fine-grit sanding sponge to gently smooth the patched area. Sand in small, circular motions, being careful not to apply too much pressure or over-sand, which could create a depression in the wall. The goal is to make the repaired area flush and smooth with the surrounding wall. After sanding, take a tack cloth and wipe down the entire area to remove any sanding dust or debris. A clean surface is vital for proper paint adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QEZ0iY8oME4</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12328-3</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t5MRbXH3Clg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand the Area Smooth — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Once the spackling compound has dried and turned white, use the sanding pad provided in the kit to gently sand the repaired area. Sand until the surface is smooth and completely flush with the surrounding wall. Be careful not to over-sand and create depressions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t5MRbXH3Clg</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12329-1</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rCAEt0FkeGI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime the Repaired Area — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>After sanding, thoroughly clean the patched area to remove all dust and debris. Then, apply a coat of drywall primer using a paint roller. Primer helps seal the porous drywall compound, promotes better paint adhesion, and ensures a uniform paint finish by preventing flashing or dull spots. Allow the primer to dry completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rCAEt0FkeGI</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12329-2</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VrGBAzgfMGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime and Paint Repaired Area — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Once the wet sanding is complete and the surface is dry, apply a high-quality primer to the patched area. This ensures proper adhesion of the paint and helps to seal the porous joint compound. Allow the primer to dry according to manufacturer instructions. Finally, apply two coats of paint that precisely match the existing wall color, using a paintbrush for edges and a roller for the main surface, to blend the repair seamlessly into the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VrGBAzgfMGk</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12329-3</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PbXMQH8jcFo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime the Repaired Area — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>After sanding, apply a quality stain-blocking primer, such as &apos;ZINSSER COVER STAIN Primer,&apos; to the entire repaired area. This can be applied using a spray can for small patches or a brush and roller for larger repairs. Ensure complete coverage of the patched area and extend slightly beyond its edges onto the existing wall. Priming seals the spackling, prevents paint from soaking in unevenly (flashing), and provides a consistent base for the final topcoat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PbXMQH8jcFo</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12330-1</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nBeDa3OWzN8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint Repaired Area — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>After the primer has dried completely, take a small paint roller and apply paint to the primed areas. Make sure to use paint that matches the existing wall color. Apply the paint in a way that blends the repaired spots with the rest of the wall, ensuring seamless coverage. You may need to apply a second coat if necessary, allowing adequate drying time between coats.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nBeDa3OWzN8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12330-2</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NsIEyx8Hvc8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint the Repaired Area — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>After the primer has dried (check product instructions, typically 30 minutes to an hour), use a paint roller to apply the final wall paint. Apply the paint over the primed patch, extending slightly beyond its boundaries to help it blend in with the rest of the wall. Depending on the paint&apos;s coverage and the original wall color, one or two coats may be necessary. Allow adequate drying time between coats.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NsIEyx8Hvc8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12330-3</loc>
    <lastmod>2026-11-13T23:21:52.220Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7iHTs5U7CXI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Topcoat Paint — How to Patch Dents and Scuffs on Stairwell Walls</video:title>
      <video:description>Once the primer is completely dry, apply the final topcoat of paint. Use paint that matches the color and finish of the existing wall. Apply the paint evenly over the primed patch, extending slightly beyond its edges to blend seamlessly with the surrounding wall. Depending on the paint and desired coverage, you may need to apply two coats, allowing adequate drying time between each.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7iHTs5U7CXI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:21:52.220Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12319-1</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a_wGiUdcWcw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Declutter the Interior Entrance — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Upon entering the home, ensure the front entrance area is also free of clutter. Specifically, check coat racks to ensure they are not overflowing with &apos;gobs of coats.&apos; Clear the area of any books, shoes, or other items that might create a sense of disorganization. The aim is to convey a sense of spaciousness and order as visitors step inside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a_wGiUdcWcw</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12319-2</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X-pQKzHx7o4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Organize and Remove Clutter from Floor — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Proceed to clear any items that are currently resting on the floor. This includes picking up and putting away bags, boxes, or other miscellaneous objects. Ensure that shoes are neatly arranged or stored in a designated area, such as under a bench or in a shoe rack, leaving the floor space clear and unobstructed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X-pQKzHx7o4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12319-3</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1Lvc2iO82RA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Declutter and Remove Valuables — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Address any visual clutter in areas where guests will be present. Walk through your home and identify items that can be temporarily stored away to create a more organized and open space. Crucially, remove anything expensive, pretty, or potentially fragile that you wouldn&apos;t want to get broken, stained, dinged, or damaged during a party. Place these items in a &apos;temporary holding zone&apos; (e.g., a closet or spare room) and bring them back out once the party is over.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1Lvc2iO82RA</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12320-1</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nB7MyAbOysU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum Each Stair Step — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Carefully vacuum each individual step of the staircase, starting from the top and working your way down. Use a handheld vacuum cleaner or the appropriate hose attachment on a larger vacuum to reach into corners and edges of each step. This ensures thorough removal of dust, pet hair, and other debris that can accumulate on carpeted stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nB7MyAbOysU</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12320-2</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LwONEoJAAqM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Vacuum the Staircase — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Begin by vacuuming the carpeted staircase from top to bottom. Utilize a specific vacuum attachment, such as a crevice tool or an upholstery brush, to reach into the corners of each step and the back risers where dust and dirt tend to accumulate. Ensure all visible loose debris is removed before proceeding to wet cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LwONEoJAAqM</video:player_loc>
      <video:duration>110</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12320-3</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i3u1VEbDAqg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deep Clean Staircase — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Connect a hose attachment to your vacuum cleaner and systematically vacuum each carpeted stair tread and riser, ensuring all dirt and pet hair are removed. Take care to maneuver the hose to cover the entire surface of each step. After vacuuming, use a feather duster or long-handled duster to clean the banister, balusters, and any decorative newel posts. Follow up by wiping down the railings and any smudged wall surfaces with a damp microfiber cloth for a deeper clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i3u1VEbDAqg</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12321-1</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z_DhFHbe7dE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Door Hardware and Fill Imperfections — How to Stage Stairs for Selling a Home</video:title>
      <video:description>If your staircase has remnants of old door installations, such as a track at the bottom or a door jamb, use a power drill to unscrew and remove these components. Once removed, identify any holes left by latches, hinges, or screws. Apply latex wood filler liberally into these holes and any other surface imperfections using a putty knife or painter&apos;s tool. Allow the filler to dry completely between applications, as multiple layers may be required for deeper voids. The video suggests three layers, plus some joint compound for optimal smoothness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z_DhFHbe7dE</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12321-2</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5kKuHWyBvqM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair and Prepare Stair Structure — How to Stage Stairs for Selling a Home</video:title>
      <video:description>After removing the old railing, inspect the underlying stair structure for any damage, especially around the areas where the newel posts were previously anchored. The video indicates the stairs were in much worse condition than expected. Use wood filler or construction adhesive to repair any rotten, broken, or unstable wooden sections of the stringers, treads, or risers. A saw may be needed to cut away severely damaged wood before filling or patching. Ensure all repairs are solid and flush with the existing structure to provide a stable foundation for the new components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5kKuHWyBvqM</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12321-3</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/22bcqm4q4vs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill and Caulk Imperfections — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Begin the preparation by addressing any cracks, bumps, or imperfections on the staircase treads, risers, handrails, and balusters. Apply DAP Wood Pro wood filler to areas requiring rigid repair, such as deep cracks in the treads and risers. For smoother surfaces like the stringers and trim, use DAP Alex Flex flexible spackling, ensuring a thin, even coat for a blemish-free finish. For larger, more flexible gaps, such as along the newel posts or where balusters meet the handrail, apply DAP Dynaflex Ultra Advanced Exterior Sealant using a caulk gun. Smooth all applied materials immediately after application to ensure a flush surface. Wipe away excess product with a wet sanding sponge or cloth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/22bcqm4q4vs</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12322-1</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s3dsK5UyWwc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Stair Tread Lighting — How to Stage Stairs for Selling a Home</video:title>
      <video:description>The final step involves installing motion-activated LED lights to illuminate the stairs. These lights are typically small fixtures or short strips that can be adhered or mounted underneath the stair treads or flush with the risers. The video briefly shows a stack of these lights and then demonstrates their effect in &apos;night mode&apos; as someone walks down the stairs, activating the lights to provide illumination and enhance the modern aesthetic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s3dsK5UyWwc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12322-2</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cHVicNWcH2c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Observe Finished Stair Lighting — How to Stage Stairs for Selling a Home</video:title>
      <video:description>A person is shown walking up a set of stairs where individual LED strips, discreetly installed underneath the leading edge of each tread, illuminate progressively. The lighting creates a clear, defined path, improving safety and adding a modern, sophisticated aesthetic to the staircase. The lights then turn off after a designated amount of time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cHVicNWcH2c</video:player_loc>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12322-3</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2HLFAAO6TmU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Second Lighting Fixtures and Test — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Once all six custom rectangular LED fixtures are assembled, use their self-adhesive backing (or additional strong adhesive tape if needed) to mount them vertically or horizontally on the brick-covered staircase wall. Arrange them in a pattern that complements the flow of the staircase, ensuring even spacing. Test the motion sensor functionality by dimming the room lights and walking up and down the stairs. The lights should activate when motion is detected and turn off after a period of inactivity, creating an engaging and functional lighting effect.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2HLFAAO6TmU</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12323-1</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pms6ezBcGdk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Extend Decor to Practical Spaces — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Often, practical spaces like kitchens, bathrooms, and laundry rooms are neglected in terms of decor, resulting in a cold or utilitarian feel. To make your home feel more cohesive and luxurious, add small decorative elements to these areas. This could include a vase of flowers or greenery, a stylish runner rug, nice hand towels, art pieces, or decorative lighting. These touches transform overlooked rooms into comfortable and aesthetically pleasing extensions of your home&apos;s design.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pms6ezBcGdk</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12323-2</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M2BnVUciL_w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Decor Touches — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Hang gold-framed mirrors and artwork on walls. Place decorative objects and faux plants on shelves and tabletops. Display enlarged black and white framed family photos on feature walls. Arrange decorative pillows and throws on seating areas. Ensure all decor pieces complement the new color scheme and design elements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M2BnVUciL_w</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12323-3</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gS6VF9C4NVg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Decorative Touches — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Complete the room&apos;s transformation by adding decorative elements that reflect the desired aesthetic. This includes placing various indoor plants in planters to bring life into the space, hanging a &apos;Welcome&apos; sign, draping string lights for ambient lighting around shelves or windows, and arranging other small decor items on shelves and surfaces, such as a decorative watering can or decorative baskets, to create a cozy and inviting atmosphere. Consider adding wall hangings or art to complete the look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gS6VF9C4NVg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12324-1</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fdmjHnv5AhM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Touches and Inspection — How to Stage Stairs for Selling a Home</video:title>
      <video:description>After all major renovations are complete, conduct a final walk-through to ensure all details are addressed. Touch up any paint, clean all surfaces, and make sure all new installations are perfect. This final check ensures the property is ready for rental or sale, leaving a lasting positive impression.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fdmjHnv5AhM</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12324-2</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/caVHqp8dSS0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Touches and Inspection — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Address any remaining smudges, fingerprints, or minor dust particles that may have settled. Clean and polish fixtures, mirrors, and glass surfaces one last time. Empty all trash bins and replace liners. Perform a final walkthrough of the entire space, critically inspecting every area for overlooked dust, marks, or debris. This step ensures that the renovated space is spotless and ready for immediate use, reflecting a high standard of cleanliness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/caVHqp8dSS0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12324-3</loc>
    <lastmod>2026-11-13T23:21:18.267Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/R6_vf8MBHuQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Touches &amp; Inspection — How to Stage Stairs for Selling a Home</video:title>
      <video:description>Perform a final inspection of the entire cleaned area. Look for any overlooked dust, fingerprints, smudges, or missed spots on all surfaces, fixtures, and floors. Use a clean microfiber cloth and a mild cleaner for touch-ups. Ensure all windows are sparkling and free of streaks. Empty all trash bins. This step is about perfection and ensuring the space is truly ready for occupancy or further finishing work.</video:description>
      <video:player_loc>https://www.youtube.com/embed/R6_vf8MBHuQ</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:21:18.267Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12312-1</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GR0QvSTc0Ck/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Building Code &amp; Measure Span — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Before cutting any balusters or fillets, it&apos;s crucial to calculate their correct spacing to comply with local building codes. In many regions (e.g., Ontario, Canada), the spacing between balusters must be less than 4 inches to prevent children or adults from climbing through. Measure the total distance between the newel posts or any other fixed points where balusters will be installed. Use a pencil and paper or a calculator to perform the following steps:</video:description>
      <video:player_loc>https://www.youtube.com/embed/GR0QvSTc0Ck</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12312-2</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eshpVa6P3mY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Baluster Spacing for Child Safety — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>The host then discusses the importance of proper baluster spacing for safety, especially for children. He demonstrates that a 4-inch ball should not be able to pass between the balusters. If a 4-inch ball can pass through, the balusters are too far apart, posing a risk of a child&apos;s head getting stuck. Therefore, balusters must be spaced closer than 4 inches apart.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eshpVa6P3mY</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12312-3</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PB8jT_iyC3c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Baluster/Cable Spacing — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Examine the spacing between balusters or horizontal cables. This gap should also not exceed 4 inches. The presenter demonstrates this by showing a space significantly larger than 4 inches between the cables. Additionally, for cable railings, it&apos;s crucial that the cables are installed under sufficient tension. If a cable can be pushed or pulled to create a gap greater than 4 inches, it does not meet code, as a child&apos;s head could get through.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PB8jT_iyC3c</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12313-1</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lLlAGrV2K94/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Staircase Length and Angle — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Begin by taking necessary measurements for your staircase railing. Use a measuring tape to determine the dimension from the top newel post down to the bottom newel post. This will give you the overall length required for your base rail and handrail. Next, use a sliding bevel or angle finder to accurately determine the angle of the stair. This angle is crucial for making precise cuts on the base rail, handrail, and spindles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lLlAGrV2K94</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12313-2</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DTEz4aQWxzI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan and Measure Stair Railing Components — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Start by counting the number of steps in your staircase. For most residential staircases, you can approximate the required handrail length by counting each step as 1 foot and adding an additional foot. You&apos;ll need one newel post for the bottom, another for each turn or landing, and a half-newel where the railing meets the wall. Also, identify if you need short balusters (for the front of the step) and long balusters (for the rear of the step). Finally, measure the distance of any straight sections of railing. If your old stair treads are worn, this is a good opportunity to replace them with new stair treads and risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DTEz4aQWxzI</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12313-3</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zn5fxev4XFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Handrails to Length — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Using a measuring tape, accurately determine the length required for each section of oak handrail, from newel post to newel post, and from the last newel post to the wall rosette. Once measurements are recorded, move outdoors to a safe cutting area. With the assistance of the presenter, Stacy operates a DeWalt miter saw to precisely cut the handrails to the measured lengths.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zn5fxev4XFA</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12314-1</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GR0QvSTc0Ck/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Building Code &amp; Measure Span — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Before cutting any balusters or fillets, it&apos;s crucial to calculate their correct spacing to comply with local building codes. In many regions (e.g., Ontario, Canada), the spacing between balusters must be less than 4 inches to prevent children or adults from climbing through. Measure the total distance between the newel posts or any other fixed points where balusters will be installed. Use a pencil and paper or a calculator to perform the following steps:</video:description>
      <video:player_loc>https://www.youtube.com/embed/GR0QvSTc0Ck</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12314-2</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GR0QvSTc0Ck/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Fillet Spacing — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Follow these steps to calculate the precise size for the fillets (spacing blocks):1. Add the total measured distance (e.g., 36.5 inches) between the newel posts to the thickness of one baluster (e.g., 1.25 inches). (36.5 + 1.25 = 37.75 inches)2. Add the maximum allowable spacing between balusters (e.g., 4 inches) to the thickness of one baluster (e.g., 1.25 inches). (4 + 1.25 = 5.25 inches)3. Divide the result from step 1 by the result from step 2 (e.g., 37.75 / 5.25 = 7.19). This gives you the ideal number of spaces.4. Round the number of spaces up to the next whole number if it&apos;s not a whole number (e.g., 7.19 rounds up to 8 spaces).5. Divide the result from step 1 (total length + 1 baluster) by the rounded number of spaces from step 4 (e.g., 37.75 / 8 = 4.71875 inches).6. Subtract the thickness of one baluster (e.g., 1.25 inches) from the result of step 5 to get the exact size for your fillets (e.g., 4.71875 - 1.25 = 3.46875 inches). This is approximately 3 and 7/16 inches. This calculation ensures consistent spacing that meets code requirements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GR0QvSTc0Ck</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12314-3</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MWDVnuSncmk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Baluster Spacing — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Using a &apos;Construction Master Pro&apos; app on a smartphone, calculate the precise spacing for the balusters. The total width of the section is 72 inches. To achieve approximately 3.5 inches between balusters, the presenter first divides 72 inches by 4 inches (baluster width + desired space), which gives 18. He then decides to use an odd number of balusters (17) to ensure a center baluster. So, he calculates the total width of 17 balusters (17 * 0.5 inches = 8.5 inches). This baluster width is then subtracted from the total width (72 - 8.5 = 63.5 inches). Finally, he divides the remaining space by the number of gaps (18 gaps) to get the exact spacing between balusters (63.5 / 18 = 3.5277 inches or 3 17/32 inches).</video:description>
      <video:player_loc>https://www.youtube.com/embed/MWDVnuSncmk</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12315-1</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XyXd2MMp4ew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Confirm Railing Height and Baluster Spacing — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>After assembling the main railing structure, confirm that its height falls within the acceptable range specified by local building codes (typically 34 to 38 inches from the step tread). Then, use a measuring tape to mark out the positions for the individual balusters along the top and bottom rails. It is crucial to ensure that the spacing between each baluster does not exceed 4 inches, as this is a common safety requirement to prevent small children from falling through.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XyXd2MMp4ew</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12315-2</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g-jjhD1upSo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Layout and Mark Baluster Spacing — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>The presenter lays out the 2x3 top and bottom rails. He measures the railing length (69.5 inches) and finds the center by marking at 35 inches (half of 70, adjusting for a 0.25-inch offset from the end). He then decides whether to place a baluster or a gap at the center for an even appearance and opts for a baluster. From the center baluster, he marks positions for subsequent balusters at 5-inch on-center intervals. This ensures a 3.5-inch gap (5 inches on-center minus 1.5-inch baluster width) complies with the 4-inch sphere rule, which states a 4-inch sphere cannot pass through any opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g-jjhD1upSo</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12315-3</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Slj0l-hQTYc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Baluster Placement on Rails — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Using a tape measure and a marker or pencil, accurately mark the top and bottom rails to indicate where each baluster will be placed. Consistent spacing is important for both aesthetics and safety regulations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Slj0l-hQTYc</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12316-1</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/56usWUTB8K8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Handrail Height for Code Compliance — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Using a tape measure, verify that the installed graspable handrail meets the required height specifications. The International Building Code mandates that handrails must be between 34 and 38 inches high, measured vertically from the tread nosing (the front edge of each stair step). Adjust the handrail&apos;s position if necessary to fall within this range to ensure code compliance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/56usWUTB8K8</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12316-2</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PB8jT_iyC3c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Railing Height — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Using a tape measure, extend it vertically (plumb) from the nosing (front edge) of a stair tread to the top of the handrail. According to code, this measurement, which is the height of the railing, should be between 34 inches and 38 inches. The presenter demonstrates that the railing in the video is too low, indicating a code violation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PB8jT_iyC3c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12316-3</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_m-5199vdMI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Standard Handrail Height Requirements — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>This step outlines the fundamental handrail height requirements as specified in IRC R311.7.8.1. For most applications, handrails must be installed within a vertical range of 34 to 38 inches (864 mm to 965 mm). This measurement is taken from the nosing of the stair treads or the surface of top landings. An important clarification is that the code does not mandate a uniform height from each nosing; rather, the handrail&apos;s height must simply remain within this specified 34-38 inch range at all measured points.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_m-5199vdMI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12317-1</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Rsff_4dH8Wc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Balusters — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Install the balusters (vertical spindles) for the railing. Pre-drill a pilot hole into the angled end of a 36-inch baluster and partially drive a 2.5-inch screw into it. Position the baluster against the stringer, aligning it correctly, and drive the screw into the stringer. Ensure the spacing between balusters is no more than 4 inches to meet safety standards. To mark the position of the second baluster, use a speed square from the previous post. Place it against the installed baluster, draw a line 4 inches away, then use the diagonal to mark a line downwards. Repeat this process for all balusters until the railing is complete.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Rsff_4dH8Wc</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12317-2</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YTFpLYgQE_E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Balusters and Verify Spacing — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Carefully peel off the painter&apos;s tape from both the bottom shoe mould and the top handrail, revealing the pre-drilled holes. Begin installing the balusters. For the screw-down type balusters (like the single-rod style), position the baluster so its base aligns with the pre-drilled holes on the bottom shoe mould. Use a cordless drill with an appropriate bit to drive in the small screws (provided with the balusters) until they are secure. For the decorative square-shaped balusters, insert the bottom into its pre-drilled hole, then gently tap the top of the baluster into its corresponding hole on the handrail using a hammer or rubber mallet, ensuring a snug fit without damaging the wood or baluster finish. The presenter notes he&apos;s not fully securing all screws at this stage because he plans to remove the balusters later for staining, but describes the complete process. After installing the balusters, use a tape measure to confirm that the spacing between them complies with building codes (less than 4 inches).</video:description>
      <video:player_loc>https://www.youtube.com/embed/YTFpLYgQE_E</video:player_loc>
      <video:duration>311</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12317-3</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c84wb8Z660c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Balusters — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Install your balusters, ensuring that the space between them does not exceed 4 inches, as mandated by code for safety. To achieve even spacing, start by marking the center of the rail. Then, use a 2x4 spacer block as a guide, positioning it from the center mark and working outwards towards the posts. This method helps determine if a baluster or a space should fall exactly at the center and allows for adjustments to achieve the most even distribution. Once positioned, simply screw each baluster to both the top and bottom rails using a 2 1/2-inch trim screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c84wb8Z660c</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12318-1</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XyXd2MMp4ew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Finishing Touches — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Once all railing sections are installed and secured, perform a comprehensive final inspection. Check the stability of all parts, ensuring there is no wobble or movement. Confirm that baluster spacing adheres to code requirements. The presenter jokingly notes that &apos;a lot of caulking and a lot of paint makes a carpenter what he ain&apos;t,&apos; implying that minor imperfections can be concealed for a professional-looking finish. This step ensures the railing is safe, functional, and visually appealing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XyXd2MMp4ew</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12318-2</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TQc7PPraChg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Alignment and Quality Control — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>Once all balusters are installed, conduct a thorough final inspection. Carefully check the alignment of each baluster, ensuring they are perfectly vertical and evenly spaced according to the design. Use a measuring tape to verify consistent gaps between balusters. Also, check for any loose balusters and tighten them as necessary. This meticulous attention to detail at the end ensures the entire railing system is stable, safe, and visually flawless, reflecting the high standards of craftsmanship.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TQc7PPraChg</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12318-3</loc>
    <lastmod>2026-11-13T23:19:37.424Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z2S1M9FuEHQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Securing and Inspection — How to Measure Baluster Spacing and Handrail Height</video:title>
      <video:description>In the final step, the workers conduct a thorough inspection of all installed balusters. They ensure every baluster is securely fastened to both the top and bottom rails, checking for any loose connections or wobbly sections. Any remaining balusters are put in place and secured using the cordless impact driver. They also visually verify consistent spacing and vertical alignment, making any minor adjustments needed to complete the safe and aesthetically pleasing deck stair railing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z2S1M9FuEHQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:19:37.424Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12306-1</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GqlWy8fp1NI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Post Spacing — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Before beginning the installation, determine the appropriate spacing for the railing posts. Start by placing posts near the house, at outside corners, and at the top of any stairs. To calculate the number of intermediate posts, measure the distance between two corner posts, divide it by the maximum permitted distance allowed between posts (e.g., 6 feet according to most codes), round that number up to the nearest whole number, and then subtract one. For example, if the distance is 15 feet and the permitted distance is 5 feet, you would have 15 ÷ 5 = 3, and 3 - 1 = 2 posts in between. Ensure that all posts are evenly spaced. If a planned post location aligns directly over a joist, you can slightly reposition it to avoid conflict.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GqlWy8fp1NI</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12306-2</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JFHs8VEY0I4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Post Placement and Gather Tools — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Begin by identifying the desired positions for all posts on your deck or stair landing. Space them equally, ensuring they align with the intended railing path. The maximum allowed spacing between posts in most areas is 6 feet for single-family detached houses. It&apos;s crucial to measure from the center of the first and last post to confirm appropriate spacing. Always consult local building codes for specific requirements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JFHs8VEY0I4</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12306-3</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3cXX5_HiRGw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate and Mark Intermediate Post Placement — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>After both corner posts are installed, the next crucial step is to determine the precise placement of any intermediate posts to ensure the railing sections are uniformly spaced and aesthetically pleasing. Measure the total distance from the outside edge of one corner post to the outside edge of the other corner post. Alternatively, measure from center-to-center of the posts. This measurement is then divided by the number of railing sections you plan to have (e.g., if you have two end posts and want three railing sections, you divide by three to get the center-to-center distance for the intermediate posts). Mark these calculated center points on the deck using a pencil or marker. The presenter notes a best practice of placing posts over deck board seams to help conceal them. From the marked center, measure 2 inches inwards (or adjust based on your specific overhang) for the front edge of the next post, consistent with the initial post&apos;s placement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3cXX5_HiRGw</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12307-1</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/y6hyd1mPxYc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Level Support Post — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>At the base of the newly installed stairs, a substantial 6x6 wooden post is positioned. Initially, the installer uses a single screw driven by a cordless drill to tack the post into place, providing temporary stability. Following this, multiple long timber lock screws are inserted into the base of the post and driven through into the concrete or underlying support structure, securing it firmly. Throughout the fastening process, a level (specifically a Johnson Level &amp; Tool &apos;JOB SITE TOUGH&apos; model is visible) is continuously used to check the plumbness (vertical alignment) of the post. The installer notes that shims may be required for perfect vertical alignment, indicating that this is a common final adjustment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/y6hyd1mPxYc</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12307-2</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gl5k78puQHY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Top Post — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Using the post base as a template, mark the precise locations where holes need to be drilled on the deck surface. Then, use your drill to create these holes for the anchoring fasteners. Finally, secure the top post into its position using the provided 6-inch lag screws. As you fasten it, use a level to ensure the post is perfectly plumb (vertically straight). It is recommended to coat the wood screw threads with non-corrosive exterior silicone caulking to prevent wood splitting and rot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gl5k78puQHY</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12307-3</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-gyGU4bMxwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Railing Posts — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>After cutting the half-lap and dovetail joints into the 4x4 posts, position each post on the deck&apos;s rim joist. Pre-drill pilot holes through the marked locations on the post into the underlying structure. Use 5-inch lag bolts to securely fasten the posts. Before tightening the lag bolts completely, use a level to ensure the post is plumb (perfectly vertical) from two different angles. Have an assistant hold the post in place while you drive the lag bolts, making minor adjustments to achieve plumb before final tightening. Seal all cut end grains of the posts and rails with an end-grain sealant before installation to protect against weathering and splitting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-gyGU4bMxwE</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12308-1</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jZ6AVbqlCnY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Install Top Rails — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Measure the distance between the installed posts to determine the required length for each top rail section. Use a miter saw equipped with a metal-cutting blade to precisely cut the black metal top rails to size. After cutting, attach plastic end caps to the rail ends for a finished look. Position the cut top rail onto the post caps and secure it using clamps, then fasten the top rail to the post caps with screws or bolts using a drill/driver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jZ6AVbqlCnY</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12308-2</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wF9tnCypflY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Top and Bottom Rails — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Now, prepare and install the top and bottom rails that will run horizontally between the posts. First, measure the distance between the installed posts to determine the length needed for these rails. Use a miter saw to cut the rail pieces to size. To ensure even installation, use small wood blocks as spacers to set the desired height for the bottom rail. Nail the bottom rail in place first, then attach the top rail, making sure it is flush with the top of the posts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wF9tnCypflY</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12308-3</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c84wb8Z660c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Top and Bottom Rails — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Measure the exact distance between each installed rail post. Cut 2x4 lumber to create your top and bottom rails, ensuring they fit snugly between the posts. When installing the bottom rail, allow for a 3 1/2-inch sweep space between the bottom edge of the rail and the deck surface. Attach each end of the rails to the posts using four 3 1/2-inch trim screws, driven in diagonally for enhanced strength and stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c84wb8Z660c</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12309-1</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KSDQKwY0bHM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insert Balusters — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Once the bottom rail is securely in place, begin inserting the individual balusters (vertical pickets) into the pre-drilled holes or channels along the length of the bottom rail. Slide each baluster down until it is fully seated. Ensure consistent spacing between each baluster, which is often dictated by the design of the railing system&apos;s pre-fabricated rails. If needed, a rubber mallet can be used gently to tap balusters into position without causing damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KSDQKwY0bHM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12309-2</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wF9tnCypflY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Balusters — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Next, you&apos;ll install the balusters, which are the vertical pieces between the top and bottom rails. These are typically made from 2x2 lumber and can be bought pre-cut. The number of balusters and their spacing depend on the size of the balusters and the distance between your posts. Code generally requires a gap of no more than 4 inches for safety. Once you&apos;ve determined your spacing, mark the locations on the rails, and then nail the balusters to both the top and bottom railings.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wF9tnCypflY</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12309-3</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c84wb8Z660c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Balusters — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Install your balusters, ensuring that the space between them does not exceed 4 inches, as mandated by code for safety. To achieve even spacing, start by marking the center of the rail. Then, use a 2x4 spacer block as a guide, positioning it from the center mark and working outwards towards the posts. This method helps determine if a baluster or a space should fall exactly at the center and allows for adjustments to achieve the most even distribution. Once positioned, simply screw each baluster to both the top and bottom rails using a 2 1/2-inch trim screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c84wb8Z660c</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12310-1</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jTuor6DqRoQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Handrail — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>With the post firmly set in concrete, re-measure the handrail height from the front edge of the top stair tread to the top of the post. Adjust as needed to achieve the target height of 37 inches along the handrail&apos;s path. Position a 2x4 handrail board against the installed post and the house at the desired angle. Use a cordless drill to secure the handrail board to both the post and the house with deck screws. Ensure all connections are tight and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jTuor6DqRoQ</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12310-2</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ntx8bTXlqrs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess and Install Graspable Handrail — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Begin by thoroughly inspecting the top rail of your existing porch railing. According to most building codes and as highlighted in the video, a top rail that is excessively wide or thick, rendering it difficult for an average adult hand to grasp securely, is typically not considered a compliant handrail. The video explicitly states, &quot;This is NOT considered a handrail because... It&apos;s too FAT to grip...&quot; If your current top rail exhibits this characteristic, you must proceed to install a secondary, graspable handrail. The video illustrates an example of such a compliant handrail, which is a slender, round rail (shown in red) positioned and securely attached below the primary, wider top rail. This secondary handrail should ideally have a continuous, easily grippable profile, with common dimensions for round handrails ranging between 1.25 inches and 2 inches in diameter. Carefully measure and mark the appropriate height for installation, typically between 34 and 38 inches above the stair nosings or deck surface. Securely fasten the new handrail to the railing posts or other structural vertical elements using robust mounting brackets and fasteners appropriate for your railing materials to ensure maximum stability and safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ntx8bTXlqrs</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12310-3</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/56usWUTB8K8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Handrail Height for Code Compliance — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Using a tape measure, verify that the installed graspable handrail meets the required height specifications. The International Building Code mandates that handrails must be between 34 and 38 inches high, measured vertically from the tread nosing (the front edge of each stair step). Adjust the handrail&apos;s position if necessary to fall within this range to ensure code compliance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/56usWUTB8K8</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12311-1</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/la5q4IhazwQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection &amp; Completion — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>After all railing sections, including straight and angled stair railings, are installed and secured, perform a final inspection. Check that all posts are plumb, all rails are level or at the correct angle, and that all connections are secure. Ensure the entire railing system meets local building codes for height and spacing, and that there are no gaps too large for a 4-inch sphere to pass through.</video:description>
      <video:player_loc>https://www.youtube.com/embed/la5q4IhazwQ</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12311-2</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XyXd2MMp4ew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Finishing Touches — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Once all railing sections are installed and secured, perform a comprehensive final inspection. Check the stability of all parts, ensuring there is no wobble or movement. Confirm that baluster spacing adheres to code requirements. The presenter jokingly notes that &apos;a lot of caulking and a lot of paint makes a carpenter what he ain&apos;t,&apos; implying that minor imperfections can be concealed for a professional-looking finish. This step ensures the railing is safe, functional, and visually appealing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XyXd2MMp4ew</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12311-3</loc>
    <lastmod>2026-11-13T23:18:17.201Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q12pmWNlMvM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Wrap-up — How to Add a Railing to Two or Three Porch Steps</video:title>
      <video:description>Once all components are installed and adhesives have cured, perform a thorough inspection of the entire railing system. Check for any loose balusters, ensure the newel posts are still plumb and secure, and verify that all connections are tight. Confirm that the finish (stain and paint) is even and complete. Address any remaining minor imperfections like exposed nail heads (by plugging them) or caulk lines (by cleaning up any excess). The completed railing provides a sturdy and aesthetically pleasing safety barrier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q12pmWNlMvM</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-13T23:18:17.201Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12302-1</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/57ml2Xb7R1I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Light Placement and Spacing — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>Before installing the lights, carefully plan their placement on the stair risers. For wrap-around steps, it&apos;s recommended to stagger the lights rather than placing them in a straight line to achieve a more aesthetically pleasing cascading effect. Identify the midpoint of each riser, and then measure out equal distances (e.g., 3 feet) from the center in both directions to mark the light positions. Use masking tape or a marker to indicate the precise locations where each light will be installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/57ml2Xb7R1I</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12302-2</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1B1sIkJ_YCs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Light Placement &amp; Solar Exposure — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>Before physically placing any lights, it is crucial to plan their placement carefully. Consider the areas that require illumination for safety, such as pathways and steps, as well as garden features you wish to highlight for aesthetic appeal. Most importantly, identify locations that receive ample direct sunlight throughout the day to ensure the solar panels can fully charge the internal batteries. The lights should be positioned to avoid shadows from trees, buildings, or other obstructions. Visually assess the garden during the day, as shown in the video at 0:03.500, to determine optimal sun exposure and light distribution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1B1sIkJ_YCs</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12302-3</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HbaLspTMbLg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Layout and Select Locations — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>Begin by planning the layout of your garden pathway lights. Walk along your desired path and visualize where each light fixture would best enhance the aesthetic and provide sufficient illumination. Consider areas that receive at least 6-8 hours of direct sunlight daily for optimal charging of the solar panels. Avoid placing lights in shaded areas under trees or overhangs, as this will significantly reduce their performance. Mark these spots with temporary markers like small flags or chalk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HbaLspTMbLg</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12303-1</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hr5dsLEobs4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Surfaces and Measure LED Strips — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>Begin by thoroughly cleaning the underside of the stair treads where the LED strip lights will be installed. Use a cleaning cloth and a suitable cleaning solution (such as rubbing alcohol or an all-purpose cleaner) to remove any dust, dirt, or grease. This ensures optimal adhesion for the LED strip&apos;s self-adhesive backing. Once the surface is clean and dry, unroll the LED strip light and position it along the intended path to measure the required length for each tread. If necessary, cut the LED strip to size at the designated cut marks, typically indicated on the strip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hr5dsLEobs4</video:player_loc>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12303-2</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xJ568E5Qfrw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Staircase for LED Installation — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>Before beginning the installation, it&apos;s essential to thoroughly prepare the staircase. First, measure the width of each stair tread to determine the appropriate length for the LED strips. Next, clean the underside of each tread with a cleaning agent, such as isopropyl alcohol and a cleaning cloth, to remove any dust, dirt, or debris that could hinder the adhesive&apos;s effectiveness. This ensures a strong and lasting bond for the LED strips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xJ568E5Qfrw</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12303-3</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4ScmotQtKm0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Solar Light — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>The next step demonstrates the simple installation of the solar step light. The presenter places the light directly onto the flat surface of an outdoor stair, specifically at the junction of the tread and the riser. While not explicitly shown, such lights typically come with pre-applied adhesive tape (like 3M VHB tape) on the back or small screw holes for secure attachment. For a secure, long-lasting installation, thoroughly clean the stair surface to remove any dirt, dust, or debris before applying the light. Press firmly for several seconds if using adhesive to ensure good contact.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4ScmotQtKm0</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12304-1</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4ScmotQtKm0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Solar Light — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>The next step demonstrates the simple installation of the solar step light. The presenter places the light directly onto the flat surface of an outdoor stair, specifically at the junction of the tread and the riser. While not explicitly shown, such lights typically come with pre-applied adhesive tape (like 3M VHB tape) on the back or small screw holes for secure attachment. For a secure, long-lasting installation, thoroughly clean the stair surface to remove any dirt, dust, or debris before applying the light. Press firmly for several seconds if using adhesive to ensure good contact.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4ScmotQtKm0</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12304-2</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xnOt33xHFy8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Solar Lights on Desired Surfaces — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>The video demonstrates the quick and easy installation process. First, locate the adhesive strip on the back of the solar light. Carefully peel off the protective backing from this adhesive. Once the backing is removed, firmly press the solar light onto the desired outdoor surface. The video shows examples of installation on concrete steps, garden ledges, and metal fence railings. The voiceover highlights that these lights are waterproof (वॉटरप्रूफ) and can be installed &apos;anywhere&apos; outdoors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xnOt33xHFy8</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12304-3</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4ScmotQtKm0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Remaining Lights — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>After successfully installing the first light, the process is replicated for additional steps. The video shows multiple solar lights placed on various stair treads along the outdoor staircase. It is important to ensure consistent placement for a uniform lighting effect and optimal solar charging. Typically, these lights are strategically positioned to cast light downwards onto the step below, illuminating the walking surface and enhancing visibility. The light placement ensures that the solar panel receives adequate sunlight during the day to charge the internal battery.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4ScmotQtKm0</video:player_loc>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12305-1</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/a7Alwdqg6sc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Light Functionality — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>To ensure the light is functional after assembly, cover the solar panel on the top of the light with your hand or place it in a dark area. This action simulates nighttime conditions. If the battery tab was correctly removed and the components are properly connected, the LED light inside should illuminate. This confirms that the light is ready for charging and operation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/a7Alwdqg6sc</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12305-2</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Aa21sz8smZM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Light Functionality — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>To test the functionality of your newly installed solar motion sensor light, ensure the device is switched &apos;ON&apos; (if it has a power button, though one is not visible in the video, it&apos;s a common feature). The video demonstrates testing by simulating night conditions: first, cover the solar panel with your hand or an opaque object (like the piece of paper shown in the video) to block ambient light. This will make the unit register darkness. Next, cover the central motion sensor with your hand. The lights should immediately illuminate brightly, confirming that both the motion sensor and the light activation in dark conditions are working as intended. Removing your hand from the motion sensor (while the solar panel is still covered) should cause the lights to turn off after a short, predetermined delay. Repeat this process a few times to confirm consistent operation and responsiveness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Aa21sz8smZM</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12305-3</loc>
    <lastmod>2026-11-13T23:17:04.347Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A3ixrJVE99Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Enjoy the Outdoor Lighting — How to Install Solar Step Lights on Outdoor Stairs</video:title>
      <video:description>After the lights are installed, allow the solar panel sufficient time to charge, typically a full day of sunlight. Once charged, the solar LED lights can be set to turn on automatically at dusk using a timer setting, or they can be manually activated as desired. The video showcases the lights beautifully illuminated at night, highlighting the improved ambiance of the patio.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A3ixrJVE99Q</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:17:04.347Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12300-1</loc>
    <lastmod>2026-11-13T23:16:05.723Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2wsmgIBz3oM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Handrail and Final Review — How to Make Stairs Safer After Knee or Hip Surgery</video:title>
      <video:description>Carefully place the new wooden handrail onto the installed metal brackets, aligning it so the pre-drilled holes in the brackets match the top and bottom of the handrail. Use the cordless drill to drive screws through the bracket holes into the handrail, securing it firmly in place. Once installed, re-measure the height of the handrail from the nose of the step at both the top and bottom to confirm it is consistently within the 32-38 inch code range (aiming for 36 inches). Test the stability of the handrail to ensure it is rock-solid and provides safe support. The new handrail should now be at the proper height and follow the stair&apos;s slope, significantly improving safety and ease of use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2wsmgIBz3oM</video:player_loc>
      <video:duration>131</video:duration>
      <video:publication_date>2026-11-13T23:16:05.723Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12300-2</loc>
    <lastmod>2026-11-13T23:16:05.723Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aikEzA_EhgU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Handrail Brackets and Rail — How to Make Stairs Safer After Knee or Hip Surgery</video:title>
      <video:description>Pre-drill pilot holes for the bracket fasteners into the center of each marked stud to prevent splitting. Attach the first handrail bracket (Bold Manufacturing Handrail Brackets are shown) to the top stud, using only one screw initially. Position the handrail onto this first bracket, aligning it with the marked line on the wall. While holding the handrail in place, pre-drill pilot holes into the handrail through the bracket&apos;s screw holes. Secure the handrail to the first bracket with screws. Proceed down the staircase, aligning each subsequent bracket with the handrail and the marked line. Pre-drill and attach each bracket into its respective stud, then attach the handrail to each bracket. By securing one screw in each bracket first, you can make slight adjustments before fully tightening all fasteners. Once all brackets are in place and the handrail is attached, ensure all screws are tightened securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aikEzA_EhgU</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-13T23:16:05.723Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12300-3</loc>
    <lastmod>2026-11-13T23:16:05.723Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rhN2wW8GVkI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Brackets and Mount Handrail — How to Make Stairs Safer After Knee or Hip Surgery</video:title>
      <video:description>Once your bracket locations are marked, pre-drill pilot holes into the wall studs and then securely fasten the handrail brackets using appropriate screws. Start with the top and bottom brackets, ensuring they are level and aligned with your marked line. Then, attach the handrail to these two end brackets. After the ends are secure and the handrail is correctly positioned, install any intermediate (middle) brackets, ensuring they are evenly spaced and also securely fastened to wall studs for maximum support and stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rhN2wW8GVkI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T23:16:05.723Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12301-1</loc>
    <lastmod>2026-11-13T23:16:05.723Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kQs-AnKSQ4Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Anti-Slip Tape — How to Make Stairs Safer After Knee or Hip Surgery</video:title>
      <video:description>After the steps are clean and dry, the next step is to accurately measure and cut the anti-slip tape. The tape is unrolled and laid along the edge of the stair step where it will be applied to determine the precise length. Once the desired length is marked, scissors are used to cut a straight piece of tape from the roll. This ensures that the tape fits perfectly across the width of each step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kQs-AnKSQ4Q</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:16:05.723Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12301-2</loc>
    <lastmod>2026-11-13T23:16:05.723Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wSsFb5YVHag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Anti-Slip Strip — How to Make Stairs Safer After Knee or Hip Surgery</video:title>
      <video:description>Carefully peel back a section of the protective backing from one end of a pre-cut anti-slip strip. Align the exposed adhesive side of the strip along the edge of the stair, ensuring it is straight and centered. Slowly press the exposed part of the strip onto the stair, working from one end to the other, while gradually peeling off the rest of the backing. Once the entire strip is in place, firmly press down along its entire length with your hands to ensure good adhesion and to remove any trapped air bubbles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wSsFb5YVHag</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:16:05.723Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12301-3</loc>
    <lastmod>2026-11-13T23:16:05.723Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OsOiHVknHTc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Abrasive Anti-Slip Strips — How to Make Stairs Safer After Knee or Hip Surgery</video:title>
      <video:description>Once the wooden steps are clean and dry, you can apply peel-and-stick abrasive strips. These strips provide immediate physical traction and are particularly effective along the leading edge of each step, where slips most often occur. The video demonstrates applying a strip, cutting it to the appropriate length with scissors, and then firmly pressing it onto the step tread. These strips are available in various widths and lengths, and some even feature fluorescent elements for enhanced visibility in low light conditions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OsOiHVknHTc</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-13T23:16:05.723Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12293-1</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xIXxnGFtaNI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Placement and Mark Handrail Height — How to Install a Post-Mounted Handrail on Stairs with No W</video:title>
      <video:description>Begin by deciding which side of the staircase the handrail will be installed on. Using a level and a pencil, mark the desired height for the handrail on the wall. Building code requirements typically mandate a handrail height between a 34-inch minimum and a 38-inch maximum, measured from the tread nosing to the top of the rail. For this project, a height of 36 inches is chosen as it falls within the acceptable range. When marking, account for the height of the mounting brackets and the thickness of the handrail itself to ensure the top surface of the finished rail is at the intended height.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xIXxnGFtaNI</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12293-2</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A8iOnOaiODc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Handrail Height and Level Line — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Begin by marking the desired height for the handrail. Standard handrail height is typically 36 inches above the ground. For stairs, measure 36 inches vertically from the leading edge (nose) of the first step and mark this point on the wall. Repeat this process for the leading edge of the top step. Using a 4-foot box level, ensure these marks are plumb (vertically aligned) and use the pencil to trace a vertical line from the marks. Once both the bottom and top points are marked at the correct height, use a chalk line to create a continuous angled line connecting these two points. This line will serve as the top edge guide for your handrail.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A8iOnOaiODc</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12293-3</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wYBYzxsH8bs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Railing Height and Mark Wall — How to Install a Post-Mounted Handrail on Stairs with No Wa</video:title>
      <video:description>Start by understanding that building codes typically require handrails to be installed between 32 and 34 inches from the nose of the stair tread. To accurately mark the installation height, place a level plumb against the wall and align it with the nose of a stair tread. Once level, mark the wall at the desired handrail height, in this case, 32 inches from the stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wYBYzxsH8bs</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12294-1</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KfJSSAi6NrI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Prepare Railing Posts — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Using a measuring tape, determine the required height for the railing posts. For stair sections, it&apos;s crucial to measure and mark the posts to follow the pitch of the stairs. The video shows a worker using a square to mark a straight cut line on a white composite post, ensuring it fits flush against the base. After marking, use a miter saw to precisely cut the post to the specified length and angle. These posts are made of a textured white material to match the existing deck columns.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KfJSSAi6NrI</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12294-2</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CuyouiaKAZ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Corner Post Lumber — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Begin by selecting an 8-foot section of 4x4 lumber and cut it in half to yield two 4-foot sections, which will serve as your corner posts. From one end of each post, measure and mark a line at 40 inches, indicating the desired height of the post above the deck. Next, measure and mark a 1-3/4 inch by 1-3/4 inch section from each side of one face of the post. This marked area will be the notch that allows the post to sit flush against the deck&apos;s rim joist. These initial measurements are crucial for a proper fit and consistent railing height.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CuyouiaKAZ8</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12294-3</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b71ftGn8wqw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Deck Posts — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>After the deck boards are installed, the first step in adding handrails is to prepare the existing deck foundation posts. Measure 36 inches above the finished deck surface and mark this height on each post using a tape measure and a pencil or marking tool. This height is a common standard for residential decks, but it&apos;s crucial to consult local building codes to confirm the exact required height before making any cuts. Once marked, use a circular saw to carefully cut off the excess length of each post, ensuring a uniform height across all posts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b71ftGn8wqw</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12295-1</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m6Cxx0itvl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Posts — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Start by positioning your posts on the deck surface according to your railing plan. Ensure there is at least 4 inches of solid wood blocking or substructure beneath the posts for the structural screws to securely fasten into. Place the two included stainless steel leveling shims under the leveling bolts at the base plate of each post. Use your power drill to drive four GRK RSS structural screws fully into place through the post base plate and into the substructure. After securing the posts, use a level or speed square to check that each post is plumb. Use a half-inch open wrench to adjust the leveling bolts as needed to ensure perfect vertical alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m6Cxx0itvl8</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12295-2</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JFHs8VEY0I4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Top Post — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Place the top post (the one at deck level) into its determined position. Use a level to ensure the post is perfectly plumb (vertically straight). With the post held in place, use the post base as a template to mark the locations where holes need to be drilled for the anchoring fasteners. Remove the post, then use your cordless drill with an appropriate drill bit to drill these pilot holes into the deck surface. The size of the holes will depend on the type of fasteners used for your specific deck structure. Once holes are drilled, apply non-corrosive exterior silicone caulking to the wood screw threads (if using wood fasteners) to prevent wood splitting and rot. Re-position the post and use your drill with the appropriate socket to secure the post to the deck using four fasteners.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JFHs8VEY0I4</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12295-3</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gl5k78puQHY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Top Post — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Using the post base as a template, mark the precise locations where holes need to be drilled on the deck surface. Then, use your drill to create these holes for the anchoring fasteners. Finally, secure the top post into its position using the provided 6-inch lag screws. As you fasten it, use a level to ensure the post is perfectly plumb (vertically straight). It is recommended to coat the wood screw threads with non-corrosive exterior silicone caulking to prevent wood splitting and rot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gl5k78puQHY</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12296-1</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KwrQWUzzsmw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Handrail — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Mark the exact locations for mounting the handrail brackets on the support posts based on the adjusted height. Pre-drill pilot holes at these marks using a drill. Secure the handrail to the posts by driving screws through the brackets into the pre-drilled holes, using a wrench or impact driver. Ensure the handrail is firmly attached and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KwrQWUzzsmw</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12296-2</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h3PglyOmv3E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Install Top Rail Brackets — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>To mark the bracket positions, lay the bottom rail directly on top of the stair tread so it contacts all points. Use a pencil or marker to make a mark on the post where the top of the rail comes into contact. This mark indicates the bottom of where the bracket will be installed. For the top bracket, measure 28 and 5/8 inches from the bottom mark up the post and make another mark. This measurement ensures the correct height for the top rail. Install the brackets by pre-drilling and then screwing them into the post with a cordless drill.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h3PglyOmv3E</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12296-3</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZD8fsOy8eHo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Handrail Brackets and Handrail — How to Install a Post-Mounted Handrail on Stairs with No Wa</video:title>
      <video:description>Before installing the handrail, attach the double-sided, adjustable handrail brackets to the top of each post. These brackets are secured with self-drilling screws into the post. Once all handrail brackets are in place, measure the distance between the center of the end posts, adding about an inch past each bracket for an overhang. Mark and cut the aluminum handrail (Viewrail Bevel Edge Handrail) to the correct length using a miter saw with a metal cutting blade, taping the cut line for a clean cut. Position the handrail onto the brackets, ensuring it&apos;s centered, and then secure it using the self-drilling fasteners provided. Install end caps by gently hammering them into place with a rubber mallet, and use corner plates for mitered corners, securing them with screws. Ensure all handrail sections are perfectly level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZD8fsOy8eHo</video:player_loc>
      <video:duration>159</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12297-1</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JUz8zjYZD28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Handrail — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Begin by measuring the length of the existing top railing of your deck stairs where the new handrail will be installed. The video demonstrates measuring approximately 90 inches along the top edge of the existing railing. Once the length is determined, use a miter saw to make a clean, square cut on one end of the round wooden handrail. Then, measure the full required length (e.g., 90 inches) from that cut end, mark it with a pencil, and make the final cut to size with the miter saw. Ensure both ends are cut cleanly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JUz8zjYZD28</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12297-2</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mGsJsLg2uJ4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cutting Handrail Sections — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Measure and cut the wooden handrail material into appropriate lengths and angles using a miter saw. This will include straight sections and angled pieces for corners or transitions. Precision in cutting is crucial for tight, seamless joints.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mGsJsLg2uJ4</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12297-3</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PUyyeVfQe7A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Handrail — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Place the full-length aluminum handrail into the newly installed brackets to visually determine the desired length. The goal is for the handrail to extend approximately 8 inches past the end of the stair tread vertically. Once the desired length is marked, use a chop saw (miter saw) to precisely cut the aluminum rail. Ensure a clean, straight cut for a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PUyyeVfQe7A</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12298-1</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A8iOnOaiODc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Handrail to Brackets — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>With the brackets loosely installed, carefully lift the handrail and place it onto the brackets, aligning it with the marked chalk line. It is highly recommended to have an assistant to help hold the handrail firmly in place during this step. Once the handrail is resting securely on the brackets, use the self-tapping screws provided to fasten the handrail to each bracket. If you find it difficult to apply enough pressure for the self-tapping screws to bite into the metal handrail, pre-drill a small pilot hole through the handrail material (using a drill bit 1/16 inch smaller than the screw diameter) before driving the self-tapping screw. Ensure all screws are fully tightened, making the handrail sturdy and secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A8iOnOaiODc</video:player_loc>
      <video:duration>104</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12298-2</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JUz8zjYZD28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Handrail to End Brackets — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Carefully place the cut wooden handrail onto the already installed top and bottom metal brackets. Ensure it is centered, level, and sits firmly in the bracket&apos;s saddle. Using the cordless drill, create pilot holes through the pre-drilled holes in the bracket&apos;s saddle and into the underside of the wooden handrail. Drive the screws (typically shorter, wood-specific screws provided with the brackets) through the brackets and into the handrail using the impact driver to firmly attach the handrail to both end brackets. This secures the main structure of the handrail.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JUz8zjYZD28</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12298-3</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rhN2wW8GVkI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Brackets and Mount Handrail — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>Once your bracket locations are marked, pre-drill pilot holes into the wall studs and then securely fasten the handrail brackets using appropriate screws. Start with the top and bottom brackets, ensuring they are level and aligned with your marked line. Then, attach the handrail to these two end brackets. After the ends are secure and the handrail is correctly positioned, install any intermediate (middle) brackets, ensuring they are evenly spaced and also securely fastened to wall studs for maximum support and stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rhN2wW8GVkI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12299-1</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AQCO0Lrw-G0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach End Caps or Wall Returns — How to Install a Post-Mounted Handrail on Stairs with No Wall</video:title>
      <video:description>To finish the ends of the handrail, attach flush end caps or wall returns. These are simply pressed onto the open ends of the rails. If using wall returns and you need to adjust their direction, gently separate the two end pieces of the wall return using a screwdriver. Then, turn the pieces around to the desired orientation and click them back into place. Finally, secure the end caps or wall returns by driving the supplied screws into them using a drill/driver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AQCO0Lrw-G0</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12299-2</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8XkQGPa8cAU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finish with End Caps and Sticker Removal — How to Install a Post-Mounted Handrail on Stairs with No </video:title>
      <video:description>Remove any remaining product stickers from the handrail using a sticker remover like &apos;Goof Off&apos;. Then, install plastic end caps onto both ends of the handrail to provide a finished look and protect against sharp edges. Similarly, secure the matching end caps to the bottom of each railing post, tapping them gently into place with a rubber mallet if needed. These caps enhance aesthetics and protect the posts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8XkQGPa8cAU</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12299-3</loc>
    <lastmod>2026-11-13T23:14:43.435Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XyXd2MMp4ew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Handrail Cap and Final Brackets — How to Install a Post-Mounted Handrail on Stairs with No W</video:title>
      <video:description>Position the pre-fabricated handrail cap directly over the assembled top railing section. Ensure it fits snugly and is aligned properly. Secure the handrail cap using appropriate fasteners (e.g., finishing nails or screws) that won&apos;t be visible. Finally, attach L-shaped brackets to the top and bottom corners of the railing sections where they meet the existing support posts. Drill pilot holes and secure these brackets with screws, providing robust lateral stability and completing the installation of the railing system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XyXd2MMp4ew</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-13T23:14:43.435Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12287-1</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/57ml2Xb7R1I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Light Placement and Spacing — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Before installing the lights, carefully plan their placement on the stair risers. For wrap-around steps, it&apos;s recommended to stagger the lights rather than placing them in a straight line to achieve a more aesthetically pleasing cascading effect. Identify the midpoint of each riser, and then measure out equal distances (e.g., 3 feet) from the center in both directions to mark the light positions. Use masking tape or a marker to indicate the precise locations where each light will be installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/57ml2Xb7R1I</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12287-2</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eMr5bs2re3M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Planning and Measurement — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Begin by assessing the staircase where the LED strip lights will be installed. Determine the optimal placement for the light strips, considering factors like light distribution, visibility of the strip, and ease of wiring. In the video, the lights are installed along the underside of the wooden handrail or stringer. Measure the total length of the staircase where the lights will be placed to determine the required length of LED strip lights. Also, identify suitable locations for the LED power supply and any necessary wiring runs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eMr5bs2re3M</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12287-3</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2Syruvll4Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Light Placement — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Using a tape measure and a pencil, mark the precise placement for each step light on the stair riser or step board. It is crucial to avoid positioning the lights directly into stair joists to prevent structural damage and simplify installation. As a general guideline, builders typically space these lights three to four feet apart for optimal illumination and aesthetic appeal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2Syruvll4Y4</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12288-1</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IpZx5EXdPhY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Selecting the Right Lighting System — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>The next crucial decision is choosing the right lighting type: solar, low-voltage, or high-voltage. High-voltage lighting is typically for commercial projects and requires professional installation due to safety concerns. Solar lighting is a good choice for aesthetic purposes, offering instant installation with no wiring and operating independently on solar power. However, for enhanced safety and security, low-voltage lighting is often preferred because it&apos;s brighter and its performance doesn&apos;t rely on sunlight storage. For a good DIY project, consider installing a low-voltage lighting kit, which usually includes 6 to 12 lights, electrical cables, connectors, and controls. If your plan is more elaborate, you can purchase all components separately to create a custom lighting solution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IpZx5EXdPhY</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12288-2</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h8mFZ_4S8IA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose Your Lights — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>With your detailed lighting plan and precise measurements in hand, you can now confidently select your deck lights. Consider the style, color, and brightness of each fixture, ensuring they align with both your functional needs and desired ambiance. Think about how the chosen lights will integrate with your deck&apos;s overall design and existing features. Many options are available, such as LED deck lights, rail lights, post cap lights, and side lights. If you need assistance with your selections or any aspect of your lighting plan, don&apos;t hesitate to consult with experts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h8mFZ_4S8IA</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12288-3</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YbmF1m8T5JU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Wattage and Select Lights — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Using your garden plan, calculate the total wattage of all the lights you intend to install. This is crucial to ensure it does not exceed the capacity of your transformer. Select different styles of lights based on their intended purpose: 50-watt spotlights for highlighting trees, 1-watt bollard lights for paths, 20-watt halogens for feature gardens, and 1-watt deck lights for steps. Ensure all selected lights are compatible with your low-voltage system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YbmF1m8T5JU</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12289-1</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_MFVPGlq8uY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Surface — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>To ensure optimal adhesion of the LED strip, the surface of the wall must be clean and free of any dust or debris. Use a dry cloth to thoroughly wipe down the entire length of the wall where the LED strip will be applied. A clean surface will significantly help the LED strip&apos;s adhesive stick better and last longer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_MFVPGlq8uY</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12289-2</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/No8dhdlRXl0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Surface — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Before adhering the strip, thoroughly clean the surface where the lights will be installed. Use a cleaning solution, such as rubbing alcohol, and a clean cloth to wipe down the area. This is a critical step to ensure strong, long-lasting adhesion of the LED strip&apos;s backing. A clean, dry, and smooth surface will prevent the strip from peeling off prematurely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/No8dhdlRXl0</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12289-3</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gDIJzKyFt98/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Mounting Surfaces — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Ascend a sturdy ladder to reach the soffit or desired mounting surface. Using an old rag, thoroughly clean the entire path where the string lights will be installed. Pay close attention to removing all dust, dirt, spiderwebs, and any other debris that could compromise the adhesion of the sticky backing on the lights. A clean surface is crucial for long-lasting attachment. Also, take this opportunity to visually inspect the area for any potential hazards like wasp nests, as mentioned in the video, to ensure safety during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gDIJzKyFt98</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12290-1</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gDIJzKyFt98/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Affix Lights with Adhesive — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Starting from your chosen beginning point (e.g., near an outdoor outlet on the patio), carefully peel off the protective backing from the adhesive strip on each individual light fixture. Press the light firmly onto the cleaned soffit or eaves, making sure it adheres securely. Work your way along the planned path, striving to keep the lights in a straight line and maintaining a consistent distance of approximately 2 to 4 inches from the edge of the house. The video demonstrates pulling the string taut before pressing each light. If a light is misplaced or not straight, you can carefully pull it off and re-stick it. Utilize the extra sticky pads provided in the kit if any adhesive loses its tackiness during re-positioning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gDIJzKyFt98</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12290-2</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2Syruvll4Y4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Lights and Final Adjustments — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>To permanently secure each light, push it firmly into its opening until it feels snug. Depending on the light fixture&apos;s design, you will either use the included installation screws to fasten it or apply a thin line of silicone adhesive around the edge of the light to create a seal and hold it in place. Throughout the installation, ensure that all lights are installed in a way that keeps high-traffic areas clear and free from obstruction, promoting safety on your deck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2Syruvll4Y4</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12290-3</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/No8dhdlRXl0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install LED Strip and Position Sensor — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Carefully peel off the protective backing from the adhesive strip on the reverse side of the LED lights. Starting from one end, firmly and smoothly press the LED strip onto the clean, dry surface, ensuring consistent contact and adhesion along its entire length. Once the strip is in place, strategically position the motion sensor controller. For instance, if installing under a bed, the sensor should be placed where it will detect feet touching the floor. For stairs, it should be at a point that detects approach from either top or bottom, as implicitly shown by the light activating as someone walks up stairs. Ensure the sensor has an unobstructed &apos;view&apos; of the area where motion is expected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/No8dhdlRXl0</video:player_loc>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12291-1</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/57ml2Xb7R1I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Manage Wiring and Connect to Transformer — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Once all lights are connected, manage the excess wiring. Neatly tack up all wires to the underside of the deck steps or risers, ensuring they are off the ground and out of sight. This prevents trip hazards and protects the wiring from damage. The leads can then be connected to a transformer. While individual light kits might come with a small transformer, for extensive installations or integration with other landscape lighting, you may opt to tie into a larger, dedicated landscape lighting transformer. Ensure the transformer is appropriately rated for the total wattage of all connected lights.</video:description>
      <video:player_loc>https://www.youtube.com/embed/57ml2Xb7R1I</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12291-2</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kWtB8bqQlBg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Power and Test System — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>With all lights installed and wires pulled to the central junction point, connect the low-voltage lighting wires to a landscape lighting transformer. The transformer converts standard household current to a safer low voltage (typically 12V or 15V). Ensure all wire connections are waterproof using appropriate outdoor-rated connectors, such as silicone-filled wire nuts. Finally, plug the transformer into a GFCI (Ground Fault Circuit Interrupter) protected outdoor electrical outlet. Turn on the power and test all the lights to ensure they are working correctly. Make any final aesthetic adjustments to the lights or surrounding hardscape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kWtB8bqQlBg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12291-3</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s9vqNUBmqeM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Electrical Wiring — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Access the wiring space behind or underneath the deck steps. For each light fixture, connect its low-voltage wires to the main power supply line using appropriate wire connectors. These are typically waterproof, low-voltage connectors designed for outdoor use to ensure durability and safety. Ensure all connections are twisted tightly and securely fastened, then insulate them if necessary to protect against moisture and electrical shorts. The video implies simple plug-and-play connections for speed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s9vqNUBmqeM</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12292-1</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/w4oZw7HEtKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Finalize Installation — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Once all lights are connected and the transformer is powered on, test the system. Verify that all lights are functioning as expected and observe their illumination. The video notes that one side of the deck initially had non-working lights due to a connection issue under the deck, which required crawling to fix. This highlights the importance of thorough testing and ensuring all connections are solid.</video:description>
      <video:player_loc>https://www.youtube.com/embed/w4oZw7HEtKA</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12292-2</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2-mUv6xJg_4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test and Adjust Lights for Optimal Placement — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>After all connections are made, plug in the transformer and turn on the power to check that every light fixture is working. During daylight, it may be difficult to fully assess the lighting effect. Therefore, wait until dark to make final adjustments. In the dark, you can accurately alter each light&apos;s position and angle to highlight specific features in your garden, create depth, or illuminate pathways as intended. Each light fixture typically has a flexible cable or adjustable mount, allowing for precise positioning. The presenter also mentions that his outdoor socket is connected to a photocell timer that turns on the lights automatically at dusk and off after a few hours, suggesting an optional upgrade for automated lighting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2-mUv6xJg_4</video:player_loc>
      <video:duration>173</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12292-3</loc>
    <lastmod>2026-11-13T23:11:22.782Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0xSoyYm6heM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test System and Make Nighttime Adjustments — How to Light Basement Stairs Without an Electrician</video:title>
      <video:description>Once all wiring is complete, turn on the transformer to ensure all fixtures are illuminated. If any fixture is not working, check its connection to the hub for correct and secure insertion. After confirming all lights are working, perform nighttime adjustments. This involves manually adjusting the pitch or angle of the spotlights and rotating the adjustable glare guards to control the spread and direction of light, optimizing the aesthetic effect.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0xSoyYm6heM</video:player_loc>
      <video:duration>106</video:duration>
      <video:publication_date>2026-11-13T23:11:22.782Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12285-1</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DesCQHspF40/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Decorative Molding — How to Install a New Newel Post</video:title>
      <video:description>To conceal the edges of the LJ-3006 Newel Mounting Plate and provide a finished look, select appropriate decorative molding pieces. Use a miter saw to accurately cut each piece of molding, typically at 45-degree angles, ensuring they fit snugly around the base of the newel post. Once cut, apply a thin bead of wood glue along the back edges of each molding piece and press them into place around the newel post. Secure the molding further by using a finish nailer to drive finish nails discreetly through the molding into the newel post or floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DesCQHspF40</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12285-2</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Vh71x53KUGU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Molding and Finish — How to Install a New Newel Post</video:title>
      <video:description>Once the newel is securely fastened to the floor with the metal brackets, it&apos;s time for the finishing touches. Take the pre-cut moldings from the kit and fit them over the exposed metal brackets to conceal them. Attach these moldings using finishing nails. After the moldings are in place, fill any visible nail holes with wood filler and sand the surfaces smooth for a seamless appearance. Finally, apply stain or paint to the newel and moldings to match your desired finish, ensuring a professional and integrated look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Vh71x53KUGU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12285-3</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZjZmh_UnabA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Newel Post Base Trim — How to Install a New Newel Post</video:title>
      <video:description>Slide the newel post down into the previously cut recess, ensuring it sits flush with the stair tread. Apply construction adhesive to the back of the decorative base trim pieces. Position these trim pieces around the bottom of the newel post, then use a pneumatic nail gun to securely fasten them, adding a finished look to the post&apos;s base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZjZmh_UnabA</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12281-1</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zgjsOcmiE_k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Newel Position — How to Install a New Newel Post</video:title>
      <video:description>Begin by carefully positioning the newel post on the stair tread, ensuring it is aligned with the handrail centerline. Use a pencil to scribe a precise line completely around the base of the newel post onto the tread surface. After scribing, remove the newel post. Use a straight edge or ruler to draw an &apos;X&apos; within the scribed box, indicating the exact center point where the newel post will be anchored.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zgjsOcmiE_k</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12281-2</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9NU9300Yj1A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark the Newel Post for Notching — How to Install a New Newel Post</video:title>
      <video:description>Place the newel post temporarily in its intended position on the bottom step. Measure and mark where the newel post needs to be notched at the bottom to fit perfectly onto the floor and around the stair tread. This marking will guide the subsequent cuts to allow the newel post to sit flush and stable, ready for the Shur-Tite bolt system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9NU9300Yj1A</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12281-3</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EnjQpnzovgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Prepare Post Location — How to Install a New Newel Post</video:title>
      <video:description>Begin by preparing the area where the newel post will be installed. This involves ensuring the subfloor or finished floor is clean and free of debris. Use a speed square, such as the DeWalt brand shown, and a pencil to accurately mark the precise footprint of the newel post and any surrounding base pieces. This marking is essential for guiding subsequent cuts and ensuring proper alignment. Green tape visible on the floor may indicate masked-off areas for protection or temporary positioning of components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EnjQpnzovgQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12282-1</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r7c-b7MbGik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Newel Post for Threaded Rod — How to Install a New Newel Post</video:title>
      <video:description>If your newel post needs to be cut to a specific height, do so now. Once the post is at the desired length, mark the center of the bottom end of the newel post. Clamp the newel post securely, and using a 1/2-inch drill bit, drill a vertical hole 5 inches deep into the bottom of the post at the marked center. This hole will accommodate the threaded rod.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r7c-b7MbGik</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12282-2</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6_L0dQM4CNI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Newel Post — How to Install a New Newel Post</video:title>
      <video:description>Ensure the newel post has been cut to the desired final length. If the floor surface is un-level, cut the base of the newel post at an angle using a saw to ensure it sits plumb. Use a speed square and pencil to mark the exact center of the newel post&apos;s base. With a cordless drill and the appropriate drill bit (5/16&quot; for hardwoods, 1/4&quot; for softwood), drill a pilot hole 4 inches deep into the marked center of the newel post base. Apply wax to the threads of the 3/8&quot; x 5&quot; hex lag bolt. Using a 9/16&quot; wrench, thread the waxed lag bolt into the pilot hole in the newel post. Continue threading until the lag bolt head is positioned within 1/2 inch of the post&apos;s surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6_L0dQM4CNI</video:player_loc>
      <video:duration>68</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12282-3</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kxn3X8Nsyz0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Floor Base (if replacing a post) — How to Install a New Newel Post</video:title>
      <video:description>If replacing an existing newel post, cut the old one off flush with the floor. Then, use a multi-tool or sander to ensure the surface is completely level. Since floorboards can be uneven, achieving a perfectly flat base is crucial for the stability of the new post. If installing a new post from scratch, this step can be skipped, assuming the floor is already flat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kxn3X8Nsyz0</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12283-1</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DesCQHspF40/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-drill Holes and Attach Mounting Plate to Newel — How to Install a New Newel Post</video:title>
      <video:description>After marking the holes, take a cordless drill and a 1/8-inch drill bit. Carefully pre-drill holes at each marked location on the bottom of the newel post. These pilot holes will prevent the wood from splitting when the screws are driven in. Once the holes are pre-drilled, position the LJ-3006 Newel Mounting Plate back onto the newel post, aligning the holes. Secure the plate to the newel using five of the No. 9, 2-inch wood screws that are typically provided in the LJ-3006 kit. Use the cordless drill to drive these screws flush with the plate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DesCQHspF40</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12283-2</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KRUEF1WAUys/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Box Newel Post with Sure-Tight Fastening System — How to Install a New Newel Post</video:title>
      <video:description>Use a square to find and mark the exact center at the bottom of the new box newel post. Measure 5 inches up from the bottom and drill a 1 1/2-inch wide hole with a forstner bit, approximately 2 1/2 inches deep. Then, switch to a 3/8-inch drill bit and continue drilling through the rest of the post. Next, drill a horizontal hole on the side of the newel post at the correct height to meet the vertical hole. Start with a 3/8-inch drill bit, then widen it with a 5/8-inch bit. Use a level to ensure accuracy. Screw the sure-tight bolt into the floor, ensuring it&apos;s securely anchored. Then, place the newel post over the bolt, add a crescent-shaped washer, and tighten the nut with a wrench. This system provides a robust anchor for the newel post without needing to frame it into the subfloor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KRUEF1WAUys</video:player_loc>
      <video:duration>171</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12283-3</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/r7c-b7MbGik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Newel Post and Tighten Fastener — How to Install a New Newel Post</video:title>
      <video:description>Slide the prepared newel post over the threaded rod. Insert the steel radius washer and then the serrated flange nut onto the threaded rod through the access hole in the newel post. Using a 9/16-inch wrench, tighten the flange nut until the newel post is firmly secured to the floor. Check the post with a level in all directions to confirm it remains plumb.</video:description>
      <video:player_loc>https://www.youtube.com/embed/r7c-b7MbGik</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12284-1</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zOO5nKgDzzw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Level the Newel Post — How to Install a New Newel Post</video:title>
      <video:description>To install the newel post, the creator first applies a generous amount of construction-grade adhesive (Power Grip) to both the floor where the post will sit and the notched areas of the post itself. He then carefully positions the newel post into the corner. He inserts lag screws into the pre-drilled pilot holes, but only tightens them loosely to allow for adjustments. Using a level, he checks the post&apos;s vertical alignment (plumb) and horizontal alignment (level). Thin wood shims are then inserted and tapped with a hammer behind the post, between the post and the wall/floor, to achieve perfect plumb and level. Once the post is properly aligned, he fully tightens the lag screws to secure it permanently, removing any excess shims that protrude.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zOO5nKgDzzw</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12284-2</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZjZmh_UnabA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Temporarily Secure Newel Post — How to Install a New Newel Post</video:title>
      <video:description>Position the partially assembled newel post at the desired location at the base of the staircase. Use a level to ensure it is perfectly plumb (vertically straight). Temporarily secure the post by drilling pilot holes and driving screws into the subfloor, followed by nailing it in place with a finish nailer. This initial fastening provides stability before permanent securing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZjZmh_UnabA</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12284-3</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hOaGlDACXLI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shim the Base (if necessary) and Install the Newel Post — How to Install a New Newel Post</video:title>
      <video:description>Before placing the newel post, assess the subfloor for levelness. If the subfloor is slightly uneven, insert thin plastic shims under the lower side of the newel post&apos;s base to ensure the post sits perfectly plumb. A small amount of shimming can significantly impact alignment due to the leverage of a tall post. Once any necessary shimming is in place, carefully slip the hollow newel post down over the ready rod, guiding it to sit flush on the centering block. Place a &quot;squash block&quot; (a duplicate of the centering block) on the interior shoulder of the newel post, followed by a washer, and then thread a 5/8-inch jam nut onto the ready rod. Use a wrench to firmly tighten this top jam nut, applying substantial tension to the rod. This tension secures the post firmly to the floor, creating a &quot;rock-rigid&quot; installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hOaGlDACXLI</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12286-1</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M2_C5xFjCVk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Final Stability Check — How to Install a New Newel Post</video:title>
      <video:description>Once all components are installed and any adhesives or glues have set, firmly grasp the newel post and handrail and attempt to shake them. The entire railing system should feel solid and exhibit no noticeable wobble or movement. This final check confirms the newel post and handrail are securely installed and safe for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M2_C5xFjCVk</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12286-2</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EY2RNODtpe8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Stability Check — How to Install a New Newel Post</video:title>
      <video:description>Once the paint has dried, firmly grasp the newel post and attempt to move it. It should feel completely solid with no give, wobble, or squeaking. The structural screws into the stringer, combined with the concealed dowel plugs, should provide a lasting and aesthetically pleasing repair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EY2RNODtpe8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12286-3</loc>
    <lastmod>2026-11-13T23:11:17.003Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l4thVO8fUoo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Finishing of Newel Post — How to Install a New Newel Post</video:title>
      <video:description>Upon completion of the newel post attachment and the surrounding staircase elements, perform a thorough final inspection. Carefully check the newel post for any signs of wobble or looseness, ensuring it is rigidly and securely integrated into the structure. Verify that all components are tightly fastened. At this stage, the routed access channel for the hidden fasteners is typically covered. While not explicitly shown in the video, a custom-cut wooden plug or decorative cover plate would be fitted and secured into the access opening, flush with the newel post&apos;s surface. This conceals the fasteners and completes the clean, professional aesthetic of the newel post. The newel post is now ready for any desired final finishes, such as sanding, staining, or painting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l4thVO8fUoo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:11:17.003Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12274-1</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/65Ho67cNt-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose Location &amp; Locate Studs — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Before marking, decide on the precise location for your mirror. It&apos;s always best practice to use a stud finder to scan the wall area. If you locate any studs, mark their center with a pencil. While hanging directly into studs provides the strongest support, it&apos;s not always possible. If you must hang without a stud, specialized drywall anchors will be required. Exercise caution when scanning or drilling near electrical outlets, light switches, or water fixtures, as utility lines may run through nearby studs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/65Ho67cNt-g</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12274-2</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/65Ho67cNt-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Wall &amp; Mirror — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Begin by determining the type of wall you&apos;re working with. Gently push a thumb tack into the wall. If it penetrates easily, you likely have drywall or plaster. If it meets significant resistance, it could be masonry or a stud. Next, inspect your mirror. Ensure its frame is robust enough to support its weight; if it&apos;s an older mirror with a potentially weaker frame, consider reinforcing it with angle brackets. Finally, use a bathroom scale to accurately weigh the mirror. This weight is crucial for selecting hanging hardware that meets or exceeds the mirror&apos;s weight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/65Ho67cNt-g</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12274-3</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/34htFK7Fgpg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Placement and Gather Tools — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Begin by determining the ideal placement for your oversized mirror. Consider its height relative to furniture, eye-level, and how it will reflect the room to maximize light and space. Use a pencil to lightly mark potential top and bottom edges or a centerline. For heavy mirrors, locating wall studs using a stud finder is crucial for secure mounting. Once the placement is finalized, assemble all required tools and materials, including the French cleat system, measuring tape, level, drill, appropriate screws (wood screws for studs, toggle anchors for drywall if studs aren&apos;t available), and safety gear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/34htFK7Fgpg</video:player_loc>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12275-1</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/65Ho67cNt-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Hooks &amp; Hang Mirror — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>At the marked hook locations on the wall, install your chosen hanging hardware. If a mark aligns with a stud, you can screw the hook directly into the stud for maximum strength. If not, you must use a suitable drywall anchor. The video showcases &apos;screw and anchor in one&apos; products which simplify the process; simply screw them directly into the drywall until secure. Ensure both hooks are installed firmly and are perfectly level. Once the hooks are in place, apply self-adhesive bumpers to the bottom corners on the back of the mirror. These prevent scratches on the wall and help stabilize the mirror. With assistance if needed, carefully lift the mirror and align its D-rings or wire with the installed wall hooks. Gently lower the mirror until it rests securely and evenly on both hooks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/65Ho67cNt-g</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12275-2</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LnZm1cMklMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose Fasteners for Drywall — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>If you have modern drywall, there&apos;s a wider array of fastening options. These include plastic mollies, small toggle bolts, and self-drilling screw anchors. For hanging a heavy mirror, a robust self-drilling drywall anchor is a good choice. This type of anchor, often made of plastic with a coarse, sharp thread, can be driven into the drywall using a hammer to start, and then fully screwed in with a drill or screwdriver. The screw can then be removed and reinserted, or a picture hanging hook can be threaded directly into the anchor. It&apos;s crucial to check the weight rating of these fasteners.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LnZm1cMklMM</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12275-3</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qpCuEStMXWk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Appropriate Screws and Anchors — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Select the appropriate type and size of screw. A pan-head screw is recommended because its flat underside will sit securely against the keyhole hanger. If drilling into a wooden stud behind drywall, a common wood screw, about 1 3/4 inches long, is suitable. If drilling into hollow drywall, use plastic screw anchors. Always check the anchor&apos;s packaging to ensure it is rated to hold the weight of the mirror. The video shows Cobra 200k plastic screw anchors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qpCuEStMXWk</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12276-1</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Qp6fhb8S9Ik/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Drill Wall for Anchors — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Based on your desired mirror height, use the laser level to project a horizontal line on the wall that corresponds to the top of the mirror&apos;s hanging hardware. Mark the center point of where the mirror will hang. From this center, use the horizontal measurement from the mirror to mark the left and right screw locations. Verify the height using the vertical measurement from the mirror. Once marked, use a drill to create pilot holes for the wall anchors. Insert appropriate wall anchors into the drilled holes, tapping them flush with a hammer if necessary. Ensure the chosen anchors are suitable for the wall material (e.g., drywall, plaster) and can support the mirror&apos;s weight, especially in a humid environment where conventional fasteners might weaken over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Qp6fhb8S9Ik</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12276-2</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rLGY0vzpvTo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure &amp; Mark Wall Placement — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>The creator starts by measuring the full-length mirror to understand its dimensions. She then uses a measuring tape to find the desired height and horizontal center for the mirror on the wall. She positions the wall-side French cleat against the wall at the chosen spot, utilizing its built-in level to ensure it is perfectly straight, and marks the screw-hole locations with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rLGY0vzpvTo</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12276-3</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LnZm1cMklMM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Hook Installation Points on Wall — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Now, transfer the measurement from the previous step to the wall. Using a tape measure, measure down from the top-center pencil mark on the wall (where you want the top of the mirror to be) by the distance determined in the previous step (e.g., 5 inches). Make a new pencil mark at this point. This new mark indicates the center point where your hanging wire will rest. Next, take your scrap piece of wood, align its center mark with the new wall mark, and use a small level (e.g., Stanley FatMax) to ensure the wood is perfectly horizontal. Once level, mark the wall at both ends of the scrap wood. These two marks indicate the precise horizontal locations where the two picture hanging hooks will be installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LnZm1cMklMM</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12277-1</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DdhRNwiumGE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount French Cleat to Wall — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Position the wall-mounted piece of the French cleat directly over the installed drywall anchors and the marked stud location. Insert the provided screws through the holes in the cleat and into the anchors. Use a Phillips head screwdriver to tighten the screws. If one of your screws aligns with a stud, pre-drill a pilot hole into the stud through the cleat before driving a wood screw for extra holding power. Ensure all screws are tightened securely, but again, avoid overtightening the drywall anchors. This step firmly attaches the wall-side of the French cleat, which will support the cabinet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DdhRNwiumGE</video:player_loc>
      <video:duration>98</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12277-2</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OrQmTaWTg2M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wall-Mounted French Cleats — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>With the wall marked, retrieve the wall-mounted halves of the French cleat system. Align each wall cleat with the pencil marks and painter&apos;s tape on the wall. Using a drill/driver and appropriate screws, securely fasten each cleat to the wall. Ensure that each cleat is level before fully tightening the screws. After all wall cleats are installed, carefully remove all the painter&apos;s tape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OrQmTaWTg2M</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12277-3</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Fcx7y1RUZAw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Drill Pilot Holes and Install Anchors — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Using a cordless drill, create pilot holes at the marked locations on the wall. The drill bit size should be slightly smaller than the diameter of your mounting screws if going into a stud, or the appropriate size for any wall anchors you plan to use if mounting into drywall without a stud. If using wall anchors, insert them into the pilot holes according to their instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Fcx7y1RUZAw</video:player_loc>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12278-1</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A9M3aKDXthM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Cleat and Spacers to Mirror — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Take one of the cut French cleat pieces and position it on the upper back of the mirror frame. Ensure that the 45-degree beveled edge faces away from the mirror. Use a cordless drill with a drill bit and a bit stop to drill pilot holes through the cleat and into the mirror&apos;s backing. The bit stop is crucial to prevent drilling too deep and damaging the mirror itself. Secure the cleat to the mirror using four 1 1/4 inch Torx wood screws, driving them through the pilot holes. Next, take the two 2-inch square plywood blocks and position one at each bottom corner on the back of the mirror frame. Drill pilot holes through these blocks and into the mirror&apos;s backing, again using the bit stop. Secure each block with 1 1/4 inch Torx wood screws. These bottom blocks will prevent the mirror from leaning forward once it is hung on the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A9M3aKDXthM</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12278-2</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/34htFK7Fgpg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Mirror-Side Cleat — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Lay the oversized mirror face-down on a clean, soft, and stable surface (e.g., a blanket on a table). Measure the width of the mirror and mark the center point on the back of its frame. Position one piece of the French cleat, with the wedge pointing downwards and away from the mirror, across the top-middle section of the mirror&apos;s back. Ensure it is perfectly level. Pre-drill pilot holes through the cleat and into the mirror frame using a drill bit slightly smaller than your screws. Secure the cleat firmly to the mirror frame with appropriate screws. If the mirror frame is thin or made of a delicate material, use shorter screws to avoid piercing through the front, or consider adhesive if specified by the manufacturer (though screws are generally preferred for heavy items).</video:description>
      <video:player_loc>https://www.youtube.com/embed/34htFK7Fgpg</video:player_loc>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12278-3</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/65Ho67cNt-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Hooks &amp; Hang Mirror — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>At the marked hook locations on the wall, install your chosen hanging hardware. If a mark aligns with a stud, you can screw the hook directly into the stud for maximum strength. If not, you must use a suitable drywall anchor. The video showcases &apos;screw and anchor in one&apos; products which simplify the process; simply screw them directly into the drywall until secure. Ensure both hooks are installed firmly and are perfectly level. Once the hooks are in place, apply self-adhesive bumpers to the bottom corners on the back of the mirror. These prevent scratches on the wall and help stabilize the mirror. With assistance if needed, carefully lift the mirror and align its D-rings or wire with the installed wall hooks. Gently lower the mirror until it rests securely and evenly on both hooks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/65Ho67cNt-g</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12279-1</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qpCuEStMXWk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang the Mirror — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>With a helper, carefully lift the mirror. Align the larger, circular part of the keyhole hangers on the back of the mirror with the heads of the screws in the wall. Once aligned, gently lower the mirror. The screw heads should slide into the narrower, vertical slot of the keyhole hangers, securing the mirror in place and allowing it to sit flush against the wall. Double-check that the mirror feels stable and secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qpCuEStMXWk</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12279-2</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/65Ho67cNt-g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wall Cleat &amp; Hang Mirror — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>At the marked locations on the wall, install the second part of the metal cleat system. Use a drill to secure it. If the marks align with wall studs, screw the cleat directly into the studs. If not, use heavy-duty drywall anchors specifically designed for the weight of your mirror (often included with the cleat kit or purchased separately). Ensure the cleat is perfectly level and firmly attached to the wall. Once the wall cleat is secure, carefully lift the mirror (with assistance if it&apos;s heavy), align the cleat attached to the mirror with the cleat on the wall, and gently lower the mirror until the two pieces interlock. The mirror should now be securely and levelly hung.</video:description>
      <video:player_loc>https://www.youtube.com/embed/65Ho67cNt-g</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12279-3</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fxm1Gzz6qto/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang the New Mirror — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>With the mounting screws securely in place and slightly protruding, carefully lift the new mirror. Align the keyhole slots or hanging brackets on the back of the mirror with the installed screws on the wall. Gently lower the mirror, ensuring that the screws slide into the slots and the mirror sits flush against the wall. Once hung, gently push down and slightly move the mirror side-to-side to ensure it is fully seated and stable on the mounting hardware. Give it a final visual check to confirm it&apos;s level and secure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fxm1Gzz6qto</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12280-1</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s5awXduIWpk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Finalize Installation — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Once the new mirror glass is securely installed, spray it with a glass cleaner and use a clean paper towel or microfiber cloth to wipe it clean. This removes any fingerprints, dust, or smudges from the installation process, leaving a clear reflective surface. Visually inspect the mirror to ensure it is properly seated and functioning as expected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s5awXduIWpk</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12280-2</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8KbTMOY0pQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Mirror and Project Review — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>After the mirror is securely in place, the installers clean its surface using glass cleaner and paper towels. They thoroughly wipe down the mirror to remove any smudges, adhesive residue, or fingerprints from the installation process, leaving a clean and sparkling finish. The presenter reflects on the completed project, noting the aesthetic appeal of the large, frameless mirror compared to a medicine cabinet, but also points out a design flaw: the countertop does not overhang the drawers, meaning water could drip directly into them.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8KbTMOY0pQY</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12280-3</loc>
    <lastmod>2026-11-13T23:10:20.735Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kEOa1KnLmKU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Finalize — How to Hang a Large Mirror on a Stair Landing</video:title>
      <video:description>Once the new mirror is securely hung, use a glass cleaner and a microfiber cloth to thoroughly clean the mirror&apos;s surface, removing any dust, fingerprints, or smudges from the installation process. Wipe down the frame as well. Take a moment to admire the new look and consider any further aesthetic changes, such as painting the walls or vanity, or replacing the light fixture, as discussed by the presenter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kEOa1KnLmKU</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:10:20.735Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12268-1</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xE7oahvb30I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Dry Steps — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Before applying the non-skid strips, it is crucial to prepare the surface of the wooden steps. First, thoroughly clean the steps to remove any dirt, grime, moss, algae, or loose debris. This can be achieved using a stiff scrub brush with a cleaning solution or by using a pressure washer for a more intense clean. After cleaning, allow the steps to dry completely. The surface must be clean and dry to ensure proper adhesion of the non-skid strips.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xE7oahvb30I</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12268-2</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OsOiHVknHTc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Outdoor Wooden Surfaces — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Begin by thoroughly cleaning any outdoor wooden surfaces, such as steps, decks, or walkways. Use a specialized deck cleaner or deck brightener to remove dirt, grime, and algae that can accumulate over time and make surfaces slick. Cleaning also helps to open up the pores of the wood, which naturally increases its traction. Ensure the cleaning product is suitable for the type of wood and always follow the manufacturer&apos;s instructions for application and rinsing. Allow the wood to dry completely before proceeding with any further treatments.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OsOiHVknHTc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12268-3</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tGwrNB_H90o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Dry Wooden Steps — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Identify any wooden steps on your porch or deck that become slippery when wet. This is a common issue, especially with pressure-treated lumber, even if it&apos;s not painted or stained. To prepare the surface for the non-skid strips, thoroughly clean the wooden steps using a scrub brush and water, or a pressure washer for a more efficient clean. Ensure all dirt, algae, and grime are removed. After cleaning, allow the steps to dry completely before proceeding to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tGwrNB_H90o</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12269-1</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TjrDNJhvzEI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch Concrete Imperfections — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>After the surface is clean and smooth, inspect for any remaining craters, dimples, or chipped areas. Use a ready-mix concrete patch, like Sika Pro Select Ready-Mix Concrete Patch. This product is pre-mixed and ready to use, making the application process convenient. Apply the patch directly onto the imperfections using a trowel or putty knife, ensuring to feather the edges for a seamless repair. Work quickly, as the patch can harden faster in hot weather (the creator noted working in over 75-degree Fahrenheit weather). Also, apply the patch to any chipped edges of the steps, smoothing it out for an even finish. Properly feathered edges will reduce the need for further sanding or grinding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TjrDNJhvzEI</video:player_loc>
      <video:duration>87</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12269-2</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jzU2HHFnZyw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair Concrete Damage — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Inspect the stairs for any chips, cracks, or spalling. Using a suitable concrete repair compound (such as a two-part epoxy patch or a quick-setting cementitious patch), fill and level these damaged areas. Apply the patching material with a trowel or spatula, ensuring it is flush with the surrounding concrete surface. Allow the repair material to cure according to the manufacturer&apos;s instructions before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jzU2HHFnZyw</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12269-3</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Eg1Fc5Cao0I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Damage &amp; Initial Cleaning — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Begin by thoroughly assessing the condition of the concrete steps, noting any areas with peeling or damaged paint, moss or algae growth, and cracks of various sizes. Use a shop vacuum to remove all loose dirt, dust, and debris from within and around any cracks or imperfections on the step surface. This initial cleaning is crucial for ensuring that repair materials and coatings adhere properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Eg1Fc5Cao0I</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12270-1</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UJ2_DKg0x00/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply the Anti-Slip Coating — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Using a mini paint roller, apply the &apos;Slip Doctors GRIPX Anti-Slip Coating &amp; Sealant&apos; evenly onto the target surface. The video specifically demonstrates this application on a brick surface. It is highlighted that the coating effectively increases slip resistance without altering the natural color or aesthetic of the original flooring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UJ2_DKg0x00</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12270-2</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OsOiHVknHTc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Spray Clear Anti-Slip Coating — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>As another solution, or in addition to abrasive strips, apply an anti-slip or slip-resistant coating to your steps. The video highlights a clear, spray-on coating that is applied directly to the step treads after they have been thoroughly cleaned and dried. This type of coating creates a transparent, textured surface that significantly increases friction without altering the appearance of the wood. Spray the coating evenly across the treads, following the manufacturer&apos;s instructions for application distance and drying time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OsOiHVknHTc</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12270-3</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Mb5K1VPpQjM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply the Anti-Slip Coating — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>With the SlipDoctors Extra Grip Additive thoroughly mixed into your paint or coating, proceed to apply the mixture to your prepared surface. Use an appropriate application tool, such as a paint roller, brush, or spray gun, following the paint manufacturer&apos;s recommended application techniques. The video demonstrates using a paint roller for a smooth, even application. Ensure you achieve consistent coverage across the entire area. The addition of the Extra Grip will create a barefoot-friendly textured surface designed to help prevent slips and falls. If your project requires multiple coats, allow the first coat to dry completely according to the paint manufacturer&apos;s specifications before applying subsequent coats, stirring the paint mixture before each application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Mb5K1VPpQjM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12271-1</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tGwrNB_H90o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Adhesive Non-Skid Strips — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Visit your local hardware store to purchase adhesive-backed non-skid strips. These are available either as individual pre-cut strips or in a roll that you can cut to your desired length using scissors. Once the wooden steps are completely clean and dry, peel the backing off the non-skid strips. Carefully apply one strip to each step, ensuring it is centered horizontally on the step and positioned near the front edge where foot traffic typically occurs. Press down firmly along the entire length of the strip to ensure maximum adhesion. This will provide the necessary traction to safely navigate the stairs, regardless of rain or shine.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tGwrNB_H90o</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12271-2</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wSsFb5YVHag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Anti-Slip Strip — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Carefully peel back a section of the protective backing from one end of a pre-cut anti-slip strip. Align the exposed adhesive side of the strip along the edge of the stair, ensuring it is straight and centered. Slowly press the exposed part of the strip onto the stair, working from one end to the other, while gradually peeling off the rest of the backing. Once the entire strip is in place, firmly press down along its entire length with your hands to ensure good adhesion and to remove any trapped air bubbles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wSsFb5YVHag</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12271-3</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XQ_9SXNchPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Steps and Apply Non-Skid Strips — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Before applying the non-skid strips, ensure that the wooden steps are thoroughly clean and completely dry. Once the steps are prepared, peel off the backing from each adhesive strip and carefully apply it to the surface of each step. Position the strip centered in the available space on the step and near the front edge, where foot traffic is most common. Press down firmly along the entire length of the strip to ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XQ_9SXNchPY</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12272-1</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aLy9kaN0d74/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Adhesive-Backed Anti-Slip Products — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Once the surface is prepared and the material is sized, carefully apply the adhesive-backed anti-slip products. For items like the &apos;Casa Pura Bullnose&apos; rubber treads or &apos;SlipDoctors Tape&apos;, which feature adhesive backing, simply peel off the protective layer and firmly press the material onto the clean, dry surface. Apply even pressure across the entire surface to ensure full contact and eliminate any trapped air bubbles, enhancing the bond&apos;s strength. Note that products with rounded corners, such as &apos;Slip Guard Safety&apos; strips, are designed to help reduce peeling over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aLy9kaN0d74</video:player_loc>
      <video:duration>195</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12272-2</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XQ_9SXNchPY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Steps and Apply Non-Skid Strips — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Before applying the non-skid strips, ensure that the wooden steps are thoroughly clean and completely dry. Once the steps are prepared, peel off the backing from each adhesive strip and carefully apply it to the surface of each step. Position the strip centered in the available space on the step and near the front edge, where foot traffic is most common. Press down firmly along the entire length of the strip to ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XQ_9SXNchPY</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12272-3</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wSsFb5YVHag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Anti-Slip Strip — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>Carefully peel back a section of the protective backing from one end of a pre-cut anti-slip strip. Align the exposed adhesive side of the strip along the edge of the stair, ensuring it is straight and centered. Slowly press the exposed part of the strip onto the stair, working from one end to the other, while gradually peeling off the rest of the backing. Once the entire strip is in place, firmly press down along its entire length with your hands to ensure good adhesion and to remove any trapped air bubbles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wSsFb5YVHag</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12273-1</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zb2M5eS7wyQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Tuff Grip to Dry and Cure — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>After applying the Tuff Grip coating, allow it to dry for the recommended time of four to six hours. During this period, avoid walking on or placing objects on the newly coated surface to ensure proper curing and durability. Once dry, the surface will be ready to enjoy its lasting anti-slip properties.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zb2M5eS7wyQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12273-2</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V0ay-k-p7Kc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Curing &amp; Access Product Information — How to Make Outdoor Steps Less Slippery in the Rain</video:title>
      <video:description>After the application is complete, allow the epoxy coating to cure fully. It is important to understand that the cure times for Ultra Grip will vary significantly depending on external factors such as the ambient temperature, the specific temperature of the surface, and the type of substrate the coating was applied to. SlipDoctors Ultra Grip is available in a variety of colors and offers different hardener options to meet specific aesthetic and performance requirements. For comprehensive technical specifications, detailed application instructions, and safety information, it is recommended to scan the provided QR code to download the Technical Data Sheet. Once fully cured, your new anti-slip surface by SlipDoctors will be ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V0ay-k-p7Kc</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12273-3</loc>
    <lastmod>2026-11-13T23:07:39.880Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bcw39ASmC-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Coating to Dry and Enjoy the Renewed Surface — How to Make Outdoor Steps Less Slippery in the </video:title>
      <video:description>After applying the textured acrylic concrete coating, allow it to dry and cure completely according to the manufacturer&apos;s recommendations. This is a crucial step to ensure the coating achieves its maximum durability and non-slip properties. Once fully dry, your concrete surface will be transformed, showcasing a fresh, clean, and significantly safer non-slip finish that enhances the overall appearance of your outdoor areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bcw39ASmC-M</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:07:39.880Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12263-1</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JS1W3Ns2Zgw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Measurements and Platform Design — How to Set Up Stairs for a Dog with Arthritis or After Su</video:title>
      <video:description>Begin by accurately measuring the total rise (vertical height) and run (horizontal depth) for the entire staircase. Design an initial landing platform strategically to prevent the stairs from encroaching into adjacent spaces, such as a hallway. It is crucial to ensure adequate head space above this landing. If the initial platform height results in insufficient head clearance, adjust its level accordingly. Additionally, consider designing the landing platform to be about 12 inches longer than strictly necessary for a 3-foot wide stair tread, as this extra length can simplify turns and reduce the need for complex custom cuts later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JS1W3Ns2Zgw</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12263-2</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2sonVhNnDkA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Riser Height — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Using a measuring tape and a level, determine the total vertical height from the top of the new deck platform down to the driveway or ground level where the new step will land. For example, if the measurement is 325mm, divide this by the number of desired risers (e.g., 2) to get the individual riser height (e.g., 162.5mm). This calculation is crucial for ensuring the new step is safe and comfortable to use. Adhere to local building codes for maximum and minimum riser heights.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2sonVhNnDkA</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12263-3</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nGs9ZKd-5Zg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stairs — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Measure the dimensions of your concrete stairs to determine the amount of lumber needed and to plan the layout of the new wooden structure. Measure the height of each riser and the length (tread depth) of each step. These measurements are crucial for cutting the wooden pieces accurately.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nGs9ZKd-5Zg</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12264-1</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zl1guOb_vWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Leg Supports and Attach to Main Plank — How to Set Up Stairs for a Dog with Arthritis or Af</video:title>
      <video:description>Assemble the A-frame leg supports using cut wood pieces and wood screws. Ensure the angles are correct for the desired ramp height and slope. Next, measure the angle required for the ramp (as seen at 0:36-0:39), and use a drill to secure the leg assembly to the underside of the main plywood plank using screws. Apply wood glue to all contact surfaces before screwing to increase strength and stability. Use clamps to hold pieces in place while the glue sets and screws are driven.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zl1guOb_vWI</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12264-2</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gecSY1rzKig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fasten Legs to Ramp — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Align the rounded ends of the prepared legs (from Step 7) with the pilot holes in the blocks on the underside of the ramp (from Step 8). Position the U-shaped leg support frame (from Step 9) so it connects and braces the legs. Insert bolts through the pilot holes in the ramp blocks and the rounded ends of the legs. Use a hammer to gently tap the bolts through if needed. Secure each bolt with a washer and a nut on the other side, tightening them with a wrench (not explicitly shown but implied for secure fastening). This creates the pivoting leg system, allowing the ramp to be adjusted to various heights or folded flat for storage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gecSY1rzKig</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12264-3</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1d8pKy6371Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Legs and Diagonal Supports — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Position each cut leg under the ramp&apos;s top platform, ensuring the angled top sits flush against the ramp&apos;s underside and the leg is vertical. Secure each leg to the frame using a drill and 3-inch interior screws. Then, measure and cut two smaller 2x4 pieces at an angle to serve as diagonal supports, connecting the vertical legs to the main ramp frame. Attach these diagonal supports with screws for added stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1d8pKy6371Y</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12265-1</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z3PwfmEETxY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Non-Slip Surface — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>To ensure the puppy has adequate traction and to prevent slips, cover the entire walking surface of the ramp with a non-slip material. The video demonstrates using an old doormat, cut to fit the sloped and flat top sections of the ramp. Secure this material firmly to the cardboard surface using glue or adhesive tape. The choice of non-slip material will depend on availability and aesthetic preference, but it should be robust enough to withstand regular use and provide good grip for the dog&apos;s paws.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z3PwfmEETxY</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12265-2</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Zl1guOb_vWI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Install Anti-Slip Covering — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Using a metal straight edge and a utility knife, carefully cut pieces of anti-slip covering material (like a rubber mat or heavy-duty carpet) to fit the main ramp surface. Once cut, apply wood glue to the plywood surface and carefully lay down the anti-slip material, pressing firmly to ensure good adhesion. This step provides traction for the pet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Zl1guOb_vWI</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12265-3</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gecSY1rzKig/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Carpet for Traction — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Lay a piece of carpet, cut to the appropriate size, over the entire top surface of the ramp. Ensure the carpet is centered and lies flat without wrinkles or creases. Using a pneumatic staple gun, securely fasten the carpet to the wooden ramp. Begin stapling along the edges and work your way across the surface, ensuring there are enough staples to keep the carpet from shifting during use. This carpeted surface provides essential traction, making it safe and comfortable for your pet to walk up and down the ramp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gecSY1rzKig</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12266-1</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6bPwOxybvaM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Ramp to the Deck and Ground — How to Set Up Stairs for a Dog with Arthritis or After Surg</video:title>
      <video:description>Position the completed ramp in place, ensuring the top edge rests securely against the deck. The ramp should be level with or slightly below the deck surface for a smooth transition. Secure the top of the ramp to the deck frame using strong L-brackets or lag screws to prevent it from shifting. At the bottom, ensure the ramp&apos;s end rests firmly on the ground or on a stable foundation (e.g., patio stones or concrete blocks) to prevent sinking or movement. Test the ramp&apos;s stability by applying pressure before allowing your dog to use it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6bPwOxybvaM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12266-2</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CUwnhY61iFs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Ramp Slope and Stability — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Observe the slope of the ramp. It presents a gradual and gentle incline, making it easy for small-legged dogs, such as the dachshunds shown in the video, to navigate up and down without difficulty or risk of injury. The ramp appears to be very stable, showing no visible wobbling or instability as multiple dogs walk, run, and even pause on its surface. This stability is crucial for pet safety and confidence. The surface, though wooden, does not appear excessively slippery, allowing the dogs to maintain good traction, although additional anti-slip measures might be considered depending on local climate conditions (e.g., rain, ice).</video:description>
      <video:player_loc>https://www.youtube.com/embed/CUwnhY61iFs</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12266-3</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YkFhGdeDoP8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Train Pet to Use Ramp — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Place the completed pet ramp against the bed. Demonstrate how the ramp functions, including the folding mechanism for storage and how the carpet can be easily removed or replaced. Train the pet to use the ramp by luring them with treats, encouraging them to confidently walk up and down.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YkFhGdeDoP8</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12267-1</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BE5wgujs7dM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Encourage and Guide Down the Stairs — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Position yourself at the bottom of the stairs and use a positive, encouraging tone to call your dog down. In the video, the owner is heard calling &apos;Pooh, come on!&apos; several times. You can use a favorite toy or a highly desired treat to entice your dog. Lure them by holding the treat a few steps down, encouraging them to take one step at a time. Reward them for each step or segment they successfully navigate. The video shows Pooh slowly and carefully descending the carpeted side of the stairs, responding to the owner&apos;s calls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BE5wgujs7dM</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12267-2</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iCHzvoIzB7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Guide and Reinforce Stair Descent — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Once your dog is comfortable being near and on the stairs, begin the process of guiding and reinforcing stair descent. For many dogs, going down stairs can be more intimidating than ascending. Start by placing your dog just one or two steps up and use high-value treats or a favorite toy to lure them down. Hold the treat at their nose level and slowly move it down to the next step, encouraging them to follow. Provide verbal encouragement and praise for every small step taken, or use a clicker to mark the exact moment they complete a step. Gradually increase the number of steps your dog descends. The video shows the small white dog confidently and independently getting up from its resting position and walking down the entire flight of white stairs. This independent and fluid movement demonstrates a complete mastery of stair navigation, which is the ultimate objective of this training phase and a direct result of consistent positive practice and reinforcement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iCHzvoIzB7E</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/12267-3</loc>
    <lastmod>2026-11-13T23:05:23.183Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BE5wgujs7dM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinforce and Celebrate Success — How to Set Up Stairs for a Dog with Arthritis or After Surgery</video:title>
      <video:description>Once your dog has successfully made it down the stairs, immediately provide enthusiastic verbal praise, petting, and a small treat. In the video, the owner exclaims &apos;Good girl, Pooh!&apos; and &apos;Yay, Pooh!&apos; as the dog reaches the bottom. This positive reinforcement reinforces the desired behavior and creates a pleasant association with navigating the stairs, encouraging future attempts. Continue with consistent praise and rewards until the dog is confidently using the stairs on their own.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BE5wgujs7dM</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-13T23:05:23.183Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11884-1</loc>
    <lastmod>2026-11-13T21:24:39.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VSz8w1hm6Vk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power at Circuit Breaker — How to Change a Light Bulb in a High Stairwell Ceiling Safely</video:title>
      <video:description>Before working on any electrical fixture, go to the main circuit breaker panel of your home. Identify the circuit breaker that controls the lighting fixture you are working on. Flip the circuit breaker to the &apos;OFF&apos; position to completely cut power to that specific circuit. This crucial step ensures electrical safety and prevents accidental electrocution while working with the wiring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VSz8w1hm6Vk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-13T21:24:39.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11884-2</loc>
    <lastmod>2026-11-13T21:24:39.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DlTI1eypy90/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Power at the Breaker — How to Change a Light Bulb in a High Stairwell Ceiling Safely</video:title>
      <video:description>Before beginning any work, locate the circuit breaker panel. Identify the breaker that controls the light fixture you will be replacing and switch it to the &apos;OFF&apos; position. This is a critical safety step to prevent electrical shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DlTI1eypy90</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T21:24:39.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11884-3</loc>
    <lastmod>2026-11-13T21:24:39.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1kE3mcHVcvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power at Circuit Breaker — How to Change a Light Bulb in a High Stairwell Ceiling Safely</video:title>
      <video:description>Locate your home&apos;s main electrical panel (breaker box). Identify the circuit breaker that controls the light fixture you intend to replace. Flip the breaker switch to the &apos;OFF&apos; position to cut off all power to that circuit. It is crucial to double-check that the power is off by attempting to turn on the light switch before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1kE3mcHVcvQ</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-13T21:24:39.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11885-1</loc>
    <lastmod>2026-11-13T21:24:39.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cnsi4sODiFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Retrieve and Position Ladder — How to Change a Light Bulb in a High Stairwell Ceiling Safely</video:title>
      <video:description>Begin by carefully removing the extension ladder from its storage location, in this case, the back of a truck bed. Ensure the area around the light fixture is clear to allow for stable ladder placement. Unclip any securing straps and gently pull the ladder out. Once on the ground, position the ladder near the light fixture. Extend the ladder to the appropriate height, ensuring that the top of the ladder extends at least three feet above the point where you will be working, if leaning against a wall, or that the top rung is within easy reach of the fixture from a safe climbing height. Lock the extension mechanisms securely to prevent slippage. Place the base of the ladder on a firm, level surface, and ensure it is stable before ascending.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cnsi4sODiFk</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-13T21:24:39.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11885-2</loc>
    <lastmod>2026-11-13T21:24:39.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f3EwLTE0xZc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Safe Ladder Setup and Access — How to Change a Light Bulb in a High Stairwell Ceiling Safely</video:title>
      <video:description>Carefully position the extension ladder against the building wall, ensuring its feet are on a stable, level, and non-slippery surface. If working in snow or on ice, clear the area beneath the ladder or use appropriate ladder stabilizers to prevent slippage. The ladder should be extended to a height that allows comfortable access to the light fixtures without overreaching, with at least three feet extending above the edge of the roof or working surface. While ascending and descending, and throughout the work, maintain three points of contact with the ladder (e.g., two hands and one foot, or two feet and one hand) to ensure stability and reduce the risk of falls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f3EwLTE0xZc</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-13T21:24:39.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11885-3</loc>
    <lastmod>2026-11-13T21:24:39.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BzcikClf1Yk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Recessed Light Replacement — How to Change a Light Bulb in a High Stairwell Ceiling Safe</video:title>
      <video:description>To address the higher, recessed light fixtures (approximately 20 feet up), a 20-foot ladder is positioned and folded in half to provide additional height. The small light bulb attachment is removed from the extension pole, and a wider attachment, specifically designed for recessed light bulbs, is threaded and secured onto the pole.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BzcikClf1Yk</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T21:24:39.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11886-1</loc>
    <lastmod>2026-11-13T21:24:39.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cnsi4sODiFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Light Bulb — How to Change a Light Bulb in a High Stairwell Ceiling Safely</video:title>
      <video:description>Carefully ascend the now-secured extension ladder, maintaining three points of contact at all times (two hands, one foot, or one hand, two feet). Once at a comfortable and safe working height, reach up to the recessed light fixture. Grip the light bulb firmly and twist it counter-clockwise to unscrew it from the socket. Be mindful not to apply excessive force. Support the bulb as it fully detaches to prevent it from falling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cnsi4sODiFk</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T21:24:39.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11886-2</loc>
    <lastmod>2026-11-13T21:24:39.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pjdBKDqb5As/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Unscrew and Remove the Old Bulb — How to Change a Light Bulb in a High Stairwell Ceiling Safely</video:title>
      <video:description>With gloves on, gently grasp the outer rim or the inner portion of the bulb itself. Turn the bulb counter-clockwise to unscrew it from the socket. If the bulb feels stuck or stiff, you may need to apply a firm, gentle jolt to get it started. Continue turning until the bulb is completely loose. Carefully lower the old bulb, ensuring you maintain a firm grip to prevent it from dropping. Incandescent bulbs can shatter into many small pieces if dropped, creating a safety hazard.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pjdBKDqb5As</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T21:24:39.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11886-3</loc>
    <lastmod>2026-11-13T21:24:39.213Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S7AXgU45J0A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Light Bulb — How to Change a Light Bulb in a High Stairwell Ceiling Safely</video:title>
      <video:description>Once the power is confirmed off and the fixture has cooled (if it was recently on), carefully grasp the existing light bulb. For recessed lights, this often involves reaching into the housing. Turn the bulb counter-clockwise to unscrew it from the socket. If the bulb is difficult to remove or breaks, wear gloves and use pliers to carefully extract any remaining glass or base from the socket. Safely dispose of the old bulb according to local regulations, especially if it&apos;s a CFL which contains mercury.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S7AXgU45J0A</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T21:24:39.213Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11646-1</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Dm656DiLBU0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Board Feet Calculation Chart — Board Foot Calculation</video:title>
      <video:description>Utilize a board feet calculation chart (provided online or created) to understand the relationship between lumber thickness, width, length, and board feet. The video demonstrates using a chart for 1-inch and 2-inch thick lumber. Identify the necessary values to mark on the rule.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Dm656DiLBU0</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11646-2</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hCVCrIcCbww/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Manual Board Foot Calculation — Board Foot Calculation</video:title>
      <video:description>This step details the manual method for calculating board feet. To find the board footage of a piece of wood, you need to measure its width in inches, its length in inches, and its thickness in inches. Once these measurements are obtained, multiply the width by the length by the thickness, and then divide the resulting product by 144. The presenter demonstrates by pointing to the width, length, and thickness of a sample piece of rough-sawn lumber, visually representing the dimensions to be measured.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hCVCrIcCbww</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11646-3</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rMOVYAFEc7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet (All Inches) — Board Foot Calculation</video:title>
      <video:description>A formula for calculating board feet is provided: Multiply the thickness in inches by the width in inches by the length in inches, then divide the total by 144. This formula yields the number of board feet for any piece of lumber, assuming all measurements are in inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rMOVYAFEc7Q</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11647-1</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rMOVYAFEc7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet (Feet &amp; Inches) — Board Foot Calculation</video:title>
      <video:description>An alternative, slightly different formula for calculating board feet is presented for convenience: Multiply the thickness in inches by the width in inches by the length in feet, then divide the total by 12. Both formulas will provide the same accurate result, allowing woodworkers to choose based on their preferred units for length.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rMOVYAFEc7Q</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11647-2</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rMOVYAFEc7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet (All Inches) — Board Foot Calculation</video:title>
      <video:description>A formula for calculating board feet is provided: Multiply the thickness in inches by the width in inches by the length in inches, then divide the total by 144. This formula yields the number of board feet for any piece of lumber, assuming all measurements are in inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rMOVYAFEc7Q</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11647-3</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rMOVYAFEc7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Footage (Feet &amp; Inches) — Board Foot Calculation</video:title>
      <video:description>An alternative formula is provided for convenience, especially when the length of the board is commonly measured in feet. The formula is: (Thickness in inches * Width in inches * Length in feet) / 12. Both formulas yield the same result, allowing users to choose the one that best fits their measurement data. For example, a board 1 inch thick, 12 inches wide, and 1 foot long would be (1 * 12 * 1) / 12 = 12 / 12 = 1 board foot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rMOVYAFEc7Q</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11648-1</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rMOVYAFEc7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet (All Inches) — Board Foot Calculation</video:title>
      <video:description>A formula for calculating board feet is provided: Multiply the thickness in inches by the width in inches by the length in inches, then divide the total by 144. This formula yields the number of board feet for any piece of lumber, assuming all measurements are in inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rMOVYAFEc7Q</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11648-2</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rMOVYAFEc7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet (Feet &amp; Inches) — Board Foot Calculation</video:title>
      <video:description>An alternative, slightly different formula for calculating board feet is presented for convenience: Multiply the thickness in inches by the width in inches by the length in feet, then divide the total by 12. Both formulas will provide the same accurate result, allowing woodworkers to choose based on their preferred units for length.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rMOVYAFEc7Q</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11648-3</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hCVCrIcCbww/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Manual Board Foot Calculation — Board Foot Calculation</video:title>
      <video:description>This step details the manual method for calculating board feet. To find the board footage of a piece of wood, you need to measure its width in inches, its length in inches, and its thickness in inches. Once these measurements are obtained, multiply the width by the length by the thickness, and then divide the resulting product by 144. The presenter demonstrates by pointing to the width, length, and thickness of a sample piece of rough-sawn lumber, visually representing the dimensions to be measured.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hCVCrIcCbww</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11649-1</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hZhu2SAVzl4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Footage — Board Foot Calculation</video:title>
      <video:description>To calculate the board footage of a piece of lumber, first pull it off the shelf and visually inspect it for straightness and defects like twists, bows, or cups. Use a tape measure to determine its width and length in inches. The thickness will be denoted by its &apos;quarter&apos; size (e.g., 5/4 = 1.25 inches). Multiply the width (inches) by the length (inches) by the thickness (inches), then divide the total by 144 (since there are 144 cubic inches in a board foot). For instance, an 11.5-inch wide, 57.5-inch long, and 1.25-inch thick board calculates to 5.74 board feet. Hardwood dealers typically round up to the nearest whole number, so this board would be sold as 6 board feet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hZhu2SAVzl4</video:player_loc>
      <video:duration>105</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11649-2</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d_9PuR691_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet — Board Foot Calculation</video:title>
      <video:description>Understand the concept of a &apos;board foot&apos;, which is a unit of volume: a board that is 1 foot by 1 foot by 1 inch thick. When buying rough-sawn lumber, it&apos;s typically sold by the board foot, regardless of its dimensions or live edges. To measure an irregularly shaped board, find its longest point for length and its widest point for width. Multiply the length (in feet) by the width (in feet) by the thickness (in inches, converted from quarters to inches) to get the board feet. Always round up to the nearest whole board foot. For example, a board that is 1 foot 2/3 inches long by 2/3 inches wide, even if it has live edges, will be rounded up to 2 board feet if the actual calculation results in just over 1 board foot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d_9PuR691_g</video:player_loc>
      <video:duration>510</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11649-3</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d_9PuR691_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet — Board Foot Calculation</video:title>
      <video:description>Understand the concept of a &apos;board foot&apos;, which is a unit of volume: a board that is 1 foot by 1 foot by 1 inch thick. When buying rough-sawn lumber, it&apos;s typically sold by the board foot, regardless of its dimensions or live edges. To measure an irregularly shaped board, find its longest point for length and its widest point for width. Multiply the length (in feet) by the width (in feet) by the thickness (in inches, converted from quarters to inches) to get the board feet. Always round up to the nearest whole board foot. For example, a board that is 1 foot 2/3 inches long by 2/3 inches wide, even if it has live edges, will be rounded up to 2 board feet if the actual calculation results in just over 1 board foot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d_9PuR691_g</video:player_loc>
      <video:duration>510</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11650-1</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rMOVYAFEc7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet (All Inches) — Board Foot Calculation</video:title>
      <video:description>A formula for calculating board feet is provided: Multiply the thickness in inches by the width in inches by the length in inches, then divide the total by 144. This formula yields the number of board feet for any piece of lumber, assuming all measurements are in inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rMOVYAFEc7Q</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11650-2</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rMOVYAFEc7Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet (Feet &amp; Inches) — Board Foot Calculation</video:title>
      <video:description>An alternative, slightly different formula for calculating board feet is presented for convenience: Multiply the thickness in inches by the width in inches by the length in feet, then divide the total by 12. Both formulas will provide the same accurate result, allowing woodworkers to choose based on their preferred units for length.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rMOVYAFEc7Q</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11650-3</loc>
    <lastmod>2026-11-13T14:15:10.493Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/54aU0qBSNiY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Board Feet &amp; Cost — Board Foot Calculation</video:title>
      <video:description>To calculate the total board feet (BF) for a piece of lumber, use the formula: (Thickness in inches * Width in inches * Length in inches) / 144. Ensure that all dimensions (thickness, width, length) are in inches. For thickness, use the nominal &apos;quarter&apos; size (e.g., 1 inch for 4/4) even if the board is planed thinner. For width, use the actual measured width. After calculating the total board feet, multiply this number by the given price per board foot to determine the total cost of the lumber. This method applies to lumber sold by the board foot, which is typically the most economical way to purchase raw lumber.</video:description>
      <video:player_loc>https://www.youtube.com/embed/54aU0qBSNiY</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-11-13T14:15:10.493Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11645-1</loc>
    <lastmod>2026-11-13T00:51:08.277Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c7jak2TlfDA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Bullnose Stair — Bullnose Tread Measurement</video:title>
      <video:description>Begin by measuring the total length and width of the bullnose stair. First, measure from the inside corner of the wall around the bullnose curve to the outer corner, bending the tape measure around the nose. This measurement is 28 inches. Next, measure the length of the entire stair, wrapping the tape measure along the base where the carpet will be installed. This measurement is 57 inches. Finally, measure the width of the stair tread, which is 29 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c7jak2TlfDA</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-13T00:51:08.277Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11645-2</loc>
    <lastmod>2026-11-13T00:51:08.277Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YAi3vAulu7A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit Bullnose and Measure for Tread Planks — Bullnose Tread Measurement</video:title>
      <video:description>Test fit the cut bullnose piece on the stair tread, ensuring its small lip correctly catches over the front of the riser for a snug fit. This bullnose has approximately a 1/2-inch overlap onto the tread. With the bullnose in place, measure the remaining depth from the live edge of the bullnose (the finished surface, not including the part that locks into the plank) to the back of the tread against the riser. Remember that most houses are not perfectly square, so measure this distance at both ends of the tread. Manufacturers often recommend a 3/8-inch expansion gap between the flooring plank and the back riser. Account for this when determining the final plank width to be cut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YAi3vAulu7A</video:player_loc>
      <video:duration>142</video:duration>
      <video:publication_date>2026-11-13T00:51:08.277Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11645-3</loc>
    <lastmod>2026-11-13T00:51:08.277Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Bullnose Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T00:51:08.277Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11643-1</loc>
    <lastmod>2026-11-13T00:51:08.277Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Bullnose Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T00:51:08.277Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11643-2</loc>
    <lastmod>2026-11-13T00:51:08.277Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Bullnose Tread Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-13T00:51:08.277Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11643-3</loc>
    <lastmod>2026-11-13T00:51:08.277Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Bullnose Tread Measurement</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T00:51:08.277Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11644-1</loc>
    <lastmod>2026-11-13T00:51:08.277Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZrWNkbh5j4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Carpet Treads — Bullnose Tread Measurement</video:title>
      <video:description>It is crucial to properly position each carpet tread on the hardwood stair for both safety and aesthetics. Ensure a gap of approximately 0.5 to 1 inch is left between the front edge of the carpet tread and the bullnose (the protruding front edge) of the stair. This gap is vital to prevent any tripping hazards when ascending or descending the stairs. For consistent alignment and ease of installation, butt the back edge of the carpet tread flush against the riser (the vertical part of the stair).</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZrWNkbh5j4M</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-13T00:51:08.277Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11644-2</loc>
    <lastmod>2026-11-13T00:51:08.277Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SZSnefGtQic/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Trim Excess Carpet and Prepare Final Riser — Bullnose Tread Measurement</video:title>
      <video:description>After stapling the second tread, the video demonstrates securing the nosing and then trimming the excess carpet for the third (and final, in this case) stair riser and the top landing. Begin by using a utility knife to cut away the excess carpet and underpad that extends past the top edge of the final riser. Then, use a tape measure and pencil to mark the desired cut line on the carpet underpad for the top riser. You&apos;ll mark both sides and use a straight edge to connect them. Carefully cut along these marked lines with a pair of sharp scissors or shears. The binding (the finished edge of the carpet) is never as tall as the pile itself, creating a &apos;kick&apos; that helps it fit snugly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SZSnefGtQic</video:player_loc>
      <video:duration>225</video:duration>
      <video:publication_date>2026-11-13T00:51:08.277Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11644-3</loc>
    <lastmod>2026-11-13T00:51:08.277Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Bullnose Tread Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-13T00:51:08.277Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11642-1</loc>
    <lastmod>2026-11-13T00:43:25.992Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Tread Depth Measurement</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-13T00:43:25.992Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11642-2</loc>
    <lastmod>2026-11-13T00:43:25.992Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Tread Depth Measurement</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T00:43:25.992Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11642-3</loc>
    <lastmod>2026-11-13T00:43:25.992Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_L6EEy0_mKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess and Measure Stairs — Tread Depth Measurement</video:title>
      <video:description>Begin by measuring the width of the stair treads using a tape measure. The objective is to determine a suitable width for the stair runner that leaves an aesthetically pleasing margin on both sides. In this instance, a width of 28 inches is suggested, leaving approximately 5-6 inches on either side of the runner. It&apos;s crucial to consider the full width of the staircase and the visual balance. The installation style is discussed, opting for an &apos;upholstered&apos; method where the carpet is stapled underneath the tread and riser, rather than a &apos;waterfall&apos; style where it flows directly over the nose of the tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_L6EEy0_mKA</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-13T00:43:25.992Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11640-1</loc>
    <lastmod>2026-11-13T00:43:25.992Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hU7get7lSaA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Riser Height and Tread Depth Consistency — Tread Depth Measurement</video:title>
      <video:description>To perform a precise measurement, take a framing square and position it firmly against the riser and tread of a step. Place the short arm of the square on the tread and the long arm vertically against the riser above it. Note the measurement at the top of the riser. Then, position the long arm of the square along the tread, extending towards the front edge (nosing) of the step, and the short arm vertically against the riser of the step below. Note the measurement for the tread depth. Repeat this process for every step on the staircase. The purpose is to compare the measurements for each riser and tread, ensuring they are consistent throughout the staircase. The video demonstrates this technique on a theoretically perfect staircase to show expected uniformity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hU7get7lSaA</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T00:43:25.992Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11640-2</loc>
    <lastmod>2026-11-13T00:43:25.992Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Tread Depth Measurement</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T00:43:25.992Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11640-3</loc>
    <lastmod>2026-11-13T00:43:25.992Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Tread Depth Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T00:43:25.992Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11641-1</loc>
    <lastmod>2026-11-13T00:43:25.992Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Tread Depth Measurement</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-13T00:43:25.992Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11641-2</loc>
    <lastmod>2026-11-13T00:43:25.992Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hU7get7lSaA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Riser Height and Tread Depth Consistency — Tread Depth Measurement</video:title>
      <video:description>To perform a precise measurement, take a framing square and position it firmly against the riser and tread of a step. Place the short arm of the square on the tread and the long arm vertically against the riser above it. Note the measurement at the top of the riser. Then, position the long arm of the square along the tread, extending towards the front edge (nosing) of the step, and the short arm vertically against the riser of the step below. Note the measurement for the tread depth. Repeat this process for every step on the staircase. The purpose is to compare the measurements for each riser and tread, ensuring they are consistent throughout the staircase. The video demonstrates this technique on a theoretically perfect staircase to show expected uniformity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hU7get7lSaA</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-13T00:43:25.992Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11641-3</loc>
    <lastmod>2026-11-13T00:43:25.992Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Tread Depth Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T00:43:25.992Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11635-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YeYYQmvZxcE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Lumber Pieces — DIY Luggage Rack</video:title>
      <video:description>Cut all the lumber pieces according to the provided cut list. The pieces include: two 1x8s @ 33&quot; (side panels), one 1x2 @ 36&quot; (top support), eight 1x4s @ 13&quot; (end panel slats), four 1x3s @ 16-1/4&quot; (corner pieces), four 1x2s @ 16-1/4&quot; (corner pieces), and eight 1x4s @ 33&quot; (side panel slats). The project panel should be 15-1/4&quot; x 36&quot; (ripped from a 1x16 if necessary). Use a miter saw for most cuts and a circular saw with a Kreg Rip-Cut guide for ripping the project panel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YeYYQmvZxcE</video:player_loc>
      <video:duration>88</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11635-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nBmSAqSkN34/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Cut Lumber — DIY Luggage Rack</video:title>
      <video:description>Begin by gathering all the necessary lumber and cutting it to the specified dimensions. The project uses 2x4, 2x6, and 1x material. You will need: four legs (13-1/4&quot; in length, 1-1/2&quot; thick - actual 2x2 or laminated stock), two end bases (17-1/4&quot; long point to long point, 3-1/2&quot; wide), four end aprons (14-1/4&quot; long point to long point, 3-1/2&quot; wide), eight slats (3-1/2&quot; wide x 12-1/2&quot; long, with a 45-degree bevel cut off each end leaving approximately 1/4&quot; of the bottom edge straight), four feet (3-1/2&quot; x 4-1/2&quot;), four cross braces (2&quot; x 1-1/2&quot; x 17&quot;), three top boards (5&quot; x 40&quot;), two upper stretchers (1-1/2&quot; x 31-1/2&quot;), and two lower stretchers (2-1/4&quot; x 31-1/2&quot;). For the lower stretchers, measure in 1-1/2&quot; and rip a 45-degree cut off that mark to create an angled edge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nBmSAqSkN34</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11635-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AMSK-s3dIYo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut All Lumber Pieces to Length — DIY Luggage Rack</video:title>
      <video:description>Using a miter saw, cut the 2x2 and 2x4 lumber pieces to the following lengths: *   Two 2x2s at 24 inches (for the top frame sides) *   Two 2x2s at 21 inches (for the top frame ends) *   Eight 2x2s at 17.5 inches (for the shelf frame and vertical supports) *   Four 2x2s at 22.5 inches (for the main legs) *   Six 2x4s at 21 inches (for the tabletop slats) *   Five 2x4s at 17.5 inches (for the shelf slats) Ensure accurate measurements using a tape measure and make clean, square cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AMSK-s3dIYo</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11636-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sBk0TAFMuL8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand Components Smooth — DIY Luggage Rack</video:title>
      <video:description>Use a sanding block or power sander with appropriate grit sandpaper (e.g., 120-150 grit) to smooth all surfaces of the cut lumber. Pay close attention to the edges and the areas where dadoes and rabbets were cut to remove any splinters, burrs, or rough spots. This preparation ensures a professional finish and facilitates easier assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sBk0TAFMuL8</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11636-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AMSK-s3dIYo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand All Lumber Pieces — DIY Luggage Rack</video:title>
      <video:description>Using an orbital sander equipped with 80-grit sandpaper, thoroughly sand all surfaces of the cut lumber pieces. This initial sanding will remove rough edges and imperfections. After the 80-grit sanding, switch to 220-grit sandpaper for a finer finish. This two-stage sanding process will ensure the wood is smooth and ready for staining.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AMSK-s3dIYo</video:player_loc>
      <video:duration>132</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11636-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wgHF72zBpEQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand All Cut Wood Pieces — DIY Luggage Rack</video:title>
      <video:description>Once all the lumber pieces have been cut to size, individually sand each piece. Start with a coarser grit sandpaper (e.g., 80 or 120 grit) to remove any saw marks or minor imperfections, then progress to a finer grit (e.g., 180 or 220 grit) for a smooth finish. Pay close attention to edges and corners, ensuring they are smooth to the touch. This step is crucial for both aesthetics and comfort, especially for an outdoor chair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wgHF72zBpEQ</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11637-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8sP6SW0aF_8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Glue and Assemble &apos;H&apos; Assemblies — DIY Luggage Rack</video:title>
      <video:description>Take two leg pieces and one horizontal side rail. Apply a liberal, but not excessive, amount of wood glue (such as Titebond Premium Wood Glue) to the ends of the side rail where it will meet the leg pieces. Carefully align the side rail between the two legs, ensuring the drilled holes in the legs line up with the rail. Press the pieces together to create two &apos;H&apos; shaped assemblies. Wipe away any immediate glue squeeze-out with a damp rag. It&apos;s recommended to clamp these assemblies to ensure a tight bond while the glue sets, though this specific clamping step isn&apos;t shown immediately in the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8sP6SW0aF_8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11637-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XyU7-UJQaHs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Side Leg Frames — DIY Luggage Rack</video:title>
      <video:description>Take two of the 32-inch leg pieces and two of the 18-inch short support pieces. Apply a generous amount of exterior-grade wood glue to the ends of the short support pieces where they will join the legs. Using a speed square to ensure perfect 90-degree angles, clamp the support pieces between the legs, one near the top and one near the bottom. Pre-drill pilot holes to prevent wood splitting, then secure each joint with 2-1/2 inch exterior screws. Repeat this process for the second side leg frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XyU7-UJQaHs</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11637-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zyW49054FD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Side Frames — DIY Luggage Rack</video:title>
      <video:description>Take two 29 1/4 inch 2x4s (legs) and one 45 inch 2x4 (cross-support). Mark a line 12 inches from the bottom of each leg. Align the 45-inch cross-support with these marks, ensuring the edges are flush. Use clamps to secure the pieces together. Pre-drill pilot holes through the legs into the end grain of the cross-support before driving 3-inch wood screws to prevent splitting and ensure a strong connection. Repeat this process to create two identical side frames.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zyW49054FD4</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11638-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/84rsnd_nKxE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Bed Slats — DIY Luggage Rack</video:title>
      <video:description>Once all legs are securely attached, carefully flip the bed frame upright. Begin installing the 15 pre-cut 59-3/4 inch 2x4 slats. Start by placing the first slat flush against either the head or foot end of the frame. To ensure proper mattress breathability and warranty compliance, maintain a consistent 2-inch gap between each subsequent slat. You can use a scrap piece of 2x2 lumber or a ruler as a spacer. Secure each slat to the side rails by driving one 2.5-inch screw through the pre-drilled holes at each end of the slat. Ensure the screw heads are countersunk slightly below the wood surface to prevent them from catching on the mattress. Repeat this process until all 15 slats are installed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/84rsnd_nKxE</video:player_loc>
      <video:duration>149</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11639-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-c0NR7Wcihg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Desired Finish — DIY Luggage Rack</video:title>
      <video:description>After the glue has fully dried and any screws are set, clean off any excess glue residue. Apply your chosen finish, such as wood stain, natural oil, or polyurethane. The type of finish will depend on whether the tray is intended for indoor or outdoor use, and the desired aesthetic. Allow the finish to dry completely according to the product&apos;s instructions, applying additional coats as needed for durability and depth of color. This step enhances the wood&apos;s natural beauty and protects it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-c0NR7Wcihg</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11639-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Abg1vE-FO9U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Finish — DIY Luggage Rack</video:title>
      <video:description>Once sanding is complete and all dust is removed, apply your chosen wood finish. This could be a stain to alter the color, an oil to penetrate and protect, or a varnish/polyurethane for a durable surface. Follow the product instructions for application, ensuring even coats and allowing adequate drying time between applications. This step protects the wood from moisture and wear while bringing out its grain.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Abg1vE-FO9U</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11639-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gekgoPxUBUc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Finish — DIY Luggage Rack</video:title>
      <video:description>Once the glue has fully cured, use a brush to apply a protective wood finish (e.g., varnish, polyurethane, or wood oil) to all surfaces of the assembled stand. This step enhances the natural color and grain of the wood, provides protection against moisture and wear, and gives the piece a professional, polished look. Apply an even coat and allow it to dry completely according to the product instructions. Additional coats may be applied for extra durability and sheen.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gekgoPxUBUc</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11633-1</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J60-DGAu_hk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Surface with Scuff Sanding or Bonding Primer — Paint Stair Risers</video:title>
      <video:description>Proper surface preparation is crucial for a durable paint finish. For painting, you need to scuff sand the surface or apply a bonding primer. The video first demonstrates scuff sanding on a dark dresser using a 150-180 grit sanding sponge. Light pressure is applied, as the goal is to gently abrade the surface for adhesion, not to remove the existing finish entirely. Alternatively, a bonding primer can be used as a dust-free option. The video uses Dixie Belle&apos;s &apos;Bonding Boss&apos; (a water-based bonding primer) poured into a paint tray lined with a plastic bag. This primer adheres to various surfaces like glass, plastic, mirrors, metal, and existing finishes. Apply the primer with a 4-inch roller for larger flat surfaces. For detailed areas, an inexpensive chip brush can be used. After applying the bonding primer, wait 24 hours before painting. Always watch for and smooth out any drips or excess product with the roller or brush before it dries, especially in corners or grooves, as wet corrections are much easier than dry ones. For detailed moldings, apply primer by dabbing or &apos;pouncing&apos; the brush to ensure coverage in all crevices, then smooth any excess.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J60-DGAu_hk</video:player_loc>
      <video:duration>261</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11633-2</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JiHWP8UJOqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Primer — Paint Stair Risers</video:title>
      <video:description>Select an appropriate primer. While some paints have built-in primer, a dedicated primer might be necessary, especially for surface problems or certain materials. The glossier your final paint finish, the smoother the primer surface needs to be, as matte paint hides imperfections while gloss highlights them. For melamine or thermofoil surfaces, even after sanding, a shellac-based primer is recommended for superior adhesion to prevent the paint and primer from scratching off easily. Apply a coat of primer using a brush for details and a roller for larger flat areas. Allow the primer to dry completely according to the manufacturer&apos;s instructions. Once dry, lightly sand the primed surface smooth using sandpaper and wipe everything clean again to remove any sanding dust with a tack cloth or damp rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JiHWP8UJOqQ</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11633-3</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-xurFQisQw4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply First Coat of Primer — Paint Stair Risers</video:title>
      <video:description>Apply a coat of water-based primer to all surfaces that will be painted. Use a smooth-surface roller for large, flat areas and a nylon brush for detailed areas and edges. The video uses Zinsser Bulls Eye 1-2-3 Water-Based Primer, which offers excellent coverage and adhesion. Apply one uniform coat, ensuring full coverage to block stains and prepare the surface for the topcoat. If desired for an extra smooth finish, lightly sand the primer after it dries completely with 220-grit sandpaper and wipe clean with a tack cloth before applying the first coat of paint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-xurFQisQw4</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11634-1</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/phgtKgCsU0s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Top Coat — Paint Stair Risers</video:title>
      <video:description>With your paint and tools prepared, begin applying the topcoat to the trim. For detailed areas, carvings, or tight corners, use a high-quality paintbrush to ensure thorough coverage. For broader, flat surfaces, switch to a foam roller to achieve a very smooth, even finish with minimal texture. Apply the paint in thin, even coats, allowing adequate drying time between coats as recommended by the paint manufacturer. This approach maximizes coverage and minimizes visible brush or roller marks, contributing to a professional-looking result.</video:description>
      <video:player_loc>https://www.youtube.com/embed/phgtKgCsU0s</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11634-2</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8YEML20wk0E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply the Topcoat — Paint Stair Risers</video:title>
      <video:description>Once the primer is completely dry, you can begin applying the topcoat. For this project, a water-based enamel was chosen because it dries quickly, offers a hard-wearing finish, and has a slight sheen level that makes the surface easy to wipe clean. You will typically need two to three coats of topcoat for full coverage and durability. For broad, flat surfaces, continue using a roller, as water-based enamel dries very quickly and a roller helps prevent overworking the paint, which can lead to streaks or an uneven finish. For trickier areas like edges, legs, or intricate details, switch to a paint brush for more control. Make sure each coat of paint is 100% dry before applying the next. This is crucial for proper adhesion and a smooth finish. Continue applying coats until you achieve the desired coverage and finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8YEML20wk0E</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11634-3</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tl-hjDHCO6U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Top Coat Paint — Paint Stair Risers</video:title>
      <video:description>Once the primer is dry, it&apos;s time to apply your chosen topcoat paint. The video suggests using paint designed for cabinets, doors, or trim, as these are formulated for high durability and resistance to wear and tear. Choose a sheen like satin, semi-gloss, or gloss for added durability and ease of cleaning. Pour the paint into a clean tray and use a roller for large areas and a brush for edges and details, similar to the primer application. Apply an even coat, allowing it to dry completely before applying a second coat if necessary for full coverage and desired finish. Repeat for any additional coats.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tl-hjDHCO6U</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11631-1</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xWVfy4mB5rk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stair Risers — Paint Stair Risers</video:title>
      <video:description>Begin by examining the existing stained stair risers, which are the vertical parts of the stairs. This project aims to paint these surfaces white. While the specific tutorial linked by the video claims sanding is not necessary, it&apos;s crucial to ensure the risers are clean and free from dust, grime, or loose debris. A thorough wipe-down with a degreaser or all-purpose cleaner and cleaning cloths would be recommended to provide a clean surface for paint adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xWVfy4mB5rk</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11631-2</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Smooth Stairs — Paint Stair Risers</video:title>
      <video:description>Before starting the installation, ensure that the existing stairs are thoroughly cleaned and smoothed. Use a broom to remove any dust, debris, or loose particles from the risers and treads. A clean and smooth surface is essential for proper adhesion and a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11631-3</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qm7Y2TR_d-o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prep Stairs — Paint Stair Risers</video:title>
      <video:description>Begin by preparing your stairs for painting. Wipe down all surfaces of the stair risers and treads with a damp cloth or a spray bottle filled with water or a mild cleaning solution. Ensure to remove any dust, dirt, or grime. This crucial step guarantees proper paint adhesion, resulting in a crisp paint line and a smooth, durable finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qm7Y2TR_d-o</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11632-1</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xWVfy4mB5rk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow for Final Drying and Curing — Paint Stair Risers</video:title>
      <video:description>After applying the final coat of white paint, allow ample time for the paint to fully dry and cure. Drying refers to the evaporation of solvents, making the paint touch-dry, while curing is the chemical process that hardens the paint for maximum durability. Avoid heavy foot traffic on the stairs during this period to prevent damage to the fresh finish. The video shows the final white result, indicating this stage has been completed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xWVfy4mB5rk</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11632-2</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H0uSiEgXyhA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Full Curing and Final Reveal — Paint Stair Risers</video:title>
      <video:description>After all paint and topcoat layers have been applied, it&apos;s crucial to allow the furniture to fully cure before putting it into use. The presenter emphasizes that curing time is different from just drying time; it allows the paint to harden completely, preventing chips and flakes. She let her chairs cure for a full 48 hours (two days) before sitting on them or moving them around. She demonstrates the finished durability by scratching the surface with her nail, showing that the finish is now very hard and resistant. The video concludes with a reveal of the transformed copper rose bistro chairs in her dining room, showcasing their smooth, even finish. She notes a potential color clash with her dining table&apos;s yellow undertones and invites viewer opinions on the combination.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H0uSiEgXyhA</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11632-3</loc>
    <lastmod>2026-11-10T19:52:50.734Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H0uSiEgXyhA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Full Curing and Final Reveal — Paint Stair Risers</video:title>
      <video:description>After all paint and topcoat layers have been applied, it&apos;s crucial to allow the furniture to fully cure before putting it into use. The presenter emphasizes that curing time is different from just drying time; it allows the paint to harden completely, preventing chips and flakes. She let her chairs cure for a full 48 hours (two days) before sitting on them or moving them around. She demonstrates the finished durability by scratching the surface with her nail, showing that the finish is now very hard and resistant. The video concludes with a reveal of the transformed copper rose bistro chairs in her dining room, showcasing their smooth, even finish. She notes a potential color clash with her dining table&apos;s yellow undertones and invites viewer opinions on the combination.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H0uSiEgXyhA</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-10T19:52:50.734Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11620-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Els7CyPe2AE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Garage Door Opener — Garage Door Opener Installation</video:title>
      <video:description>Assemble the garage door opener&apos;s rail and motor unit. Securely mount the motor unit to the ceiling using perforated metal brackets, ensuring it is centered above the door and aligned with the door&apos;s movement path. The front of the motor&apos;s rail is then connected to a bracket above the garage door opening, often secured with a pin. Confirm that the motor is firmly attached to the ceiling joists or a sturdy header.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Els7CyPe2AE</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11620-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H57kKA89LUM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Garage Door Opener Unit — Garage Door Opener Installation</video:title>
      <video:description>Assemble the opener rail to the motor head unit. Carefully lift the entire opener assembly and suspend it from the ceiling, typically using perforated angle iron or specialized brackets, ensuring it&apos;s centered and aligned with the door. Connect the opener arm to the top panel of the garage door, allowing the motor to pull and push the door. Connect the opener&apos;s power cord and any safety sensor wiring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H57kKA89LUM</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11620-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Rail to Wall and Position Opener — Garage Door Opener Installation</video:title>
      <video:description>Raise the garage door manually to its highest point of travel. Use a level to mark the highest point on the wall above the door, ensuring it is centered. Measure and mark the locations for the wall mounting bracket, which will hold the end of the opener rail closest to the door. Use a drill/driver and an appropriate drill bit to create pilot holes. Secure the wall mounting bracket to the wooden header (the structural beam above the garage door) using strong lag screws. Lift the fully assembled opener rail and motor unit, using two ladders for support. Attach the end of the rail to the newly installed wall mounting bracket, securing it with bolts and nuts. Use C-clamps to hold the rail in place while ensuring it is level before final tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11621-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Els7CyPe2AE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tension Torsion Springs — Garage Door Opener Installation</video:title>
      <video:description>Install the torsion spring system above the garage door opening. This system consists of a metal shaft, one or more torsion springs, and cables that attach to the bottom of the door. The springs are critical for counterbalancing the door&apos;s weight. Once installed, the springs must be precisely tensioned using winding bars. The video specifies 8.75 turns for this particular door, which weighs approximately 450 pounds. Each turn adds significant torque. After reaching the correct tension, the set screws are tightened to hold the springs in place. This step is extremely dangerous and requires specialized tools and expertise; improper tensioning can lead to severe injury.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Els7CyPe2AE</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11621-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Jql5vkPT_Kk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Springs, Winding Units, and Drums — Garage Door Opener Installation</video:title>
      <video:description>Slide the torsion springs onto the full-length torsion tube. You may need to gently work with the alignment of the tube and the spring spacers inside the springs to ensure the tube passes through smoothly. Next, insert the spring plug into its corresponding winding unit. Double-check that the spring plug and the winding unit both have matching color codes (left/green, right/orange) before snapping them together. Align the two ears on the spring plug with the two slots in the winding unit and push them firmly until they fully engage. Confirm that both ears are securely in place. Then, slide the drums onto the tube, ensuring that the cable slots on the drums are facing away from the winding unit(s) and the end bearing support. The drums are designated as left (&apos;L&apos;) and right (&apos;R&apos;) near the cable slot; install the correct drum on each side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Jql5vkPT_Kk</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11621-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nQkjyGX2lqo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Spring and Right Drum — Garage Door Opener Installation</video:title>
      <video:description>Slide the new torsion spring onto the shaft, ensuring the stationary cone faces the center bracket and the winding cone faces outward towards the end bearing. Reinstall the right side drum, aligning the previously made marks on the drum and shaft. Hand-tighten the two set screws on the drum, ensuring they fall into the indentations created by the old set screws. Then, tighten them an additional half-turn past hand-tight with a wrench.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nQkjyGX2lqo</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11622-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JZHY11xw_xc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Front Bracket — Garage Door Opener Installation</video:title>
      <video:description>Mount the front bracket (header bracket) to the wall above the garage door. The narrator had to cut out a section of pegboard and install a 2x4 stud behind it to provide a solid mounting surface, as the original location for the old opener was not suitable for the new unit. The bracket must be securely fastened to a structural element (like a wooden header or stud) to support the weight and forces of the garage door operation. The specific placement of this bracket will depend on your garage&apos;s construction and door height, so refer to your opener&apos;s manual for precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JZHY11xw_xc</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11622-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tl_sDahKZbg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Header Bracket and Connect Rail — Garage Door Opener Installation</video:title>
      <video:description>Align the header bracket with the pre-drilled holes and insert the provided lag bolts. Use a socket wrench to tighten the lag bolts securely, ensuring the bracket is firmly attached to the header board. Once the header bracket is installed, connect the rail of the garage door opener to it using the provided pin and locking mechanism.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tl_sDahKZbg</video:player_loc>
      <video:duration>76</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11623-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zuhbxSpQO_8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Spring Tension and Test Door — Garage Door Opener Installation</video:title>
      <video:description>Now it&apos;s time to add tension to the spring. First, tighten the set screw located on the end of the spring onto the torsion tube. Next, thread the lift cable from the bottom of the door, up through the tracks, and insert it into the cable drum. Then, tighten the set screw on the cable drum by 3/4 to a full turn to remove any remaining slack in the cable. Repeat this process for both sides of the door. Consult the provided manual, specifically the &apos;Spring Winding Table C&apos; (or similar chart), to determine the exact number of winds required for your specific door height. Using your drill and either the supplied insert bit or a 7/16-inch socket, tighten the spring according to the suggested number of winds. Finally, test the door&apos;s movement by hand to ensure it operates freely and easily; you should be able to lift it with only a few fingers. If you plan to use a garage door opener, make sure the door is properly reinforced to prevent damage when the opener is engaged. Refer to your opener&apos;s instructions for specific reinforcement guidelines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zuhbxSpQO_8</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11623-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Els7CyPe2AE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Tension Torsion Springs — Garage Door Opener Installation</video:title>
      <video:description>Install the torsion spring system above the garage door opening. This system consists of a metal shaft, one or more torsion springs, and cables that attach to the bottom of the door. The springs are critical for counterbalancing the door&apos;s weight. Once installed, the springs must be precisely tensioned using winding bars. The video specifies 8.75 turns for this particular door, which weighs approximately 450 pounds. Each turn adds significant torque. After reaching the correct tension, the set screws are tightened to hold the springs in place. This step is extremely dangerous and requires specialized tools and expertise; improper tensioning can lead to severe injury.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Els7CyPe2AE</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11623-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XoQPLzVBKio/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Springs and Counterbalance System — Garage Door Opener Installation</video:title>
      <video:description>The torsion springs are carefully assembled onto the shaft. Once assembled, the entire spring and shaft unit is lifted and mounted securely to the framing above the garage door. The installation crew notes that the pressure-treated material added during the framing step made this process significantly easier, as it provided a solid base without requiring extensive use of concrete anchors. After mounting the springs, the counterbalance lift cables are attached: one end to a bracket at the bottom of the door and the other to the drums on the spring shaft.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XoQPLzVBKio</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11624-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k8Fu9uoSOk4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Rail to Motor Head and Install Opener — Garage Door Opener Installation</video:title>
      <video:description>With the belt tensioned, attach the entire rail assembly to the garage door opener motor head. Use a power drill or wrench to securely fasten the two bolts that connect the motor head to the rail. Finally, install the belt cap on top of the garage door opener motor head sprocket. The assembled garage door opener can then be propped up in the garage using angle brackets or L-brackets, ensuring it is centered on the garage door&apos;s center stile for proper leverage when opening and closing the door.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k8Fu9uoSOk4</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11624-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S52wT1sX4Yw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble the Rail and Mount to Motor Head — Garage Door Opener Installation</video:title>
      <video:description>Begin by taking the individual rail sections and sliding them together. Most modern garage door openers use a simple clip-in system where sections interlock easily. The presenter demonstrates sliding and clicking four rail sections into place, including the extension piece for the 8-foot door. Next, attach the motor bracket (provided with the new opener) to the top of the motor head using nuts and bolts. Ensure the bracket is oriented correctly. Then, connect the fully assembled rail to the motor head by aligning the rail&apos;s end with the bracket and securing it with appropriate bolts and nuts. The presenter initially struggles with alignment but quickly rectifies it, highlighting that precision is key. Tighten all fasteners snugly but avoid over-tightening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S52wT1sX4Yw</video:player_loc>
      <video:duration>215</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11624-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vDc-m0cB_7o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Opener Assembly — Garage Door Opener Installation</video:title>
      <video:description>Position a sturdy step ladder directly under the header bracket. Carefully lift the assembled rail and motor unit, connecting the end of the rail (the part without the motor) to the header bracket using the supplied clevis pin and loop. Ensure the pin is securely inserted. Next, carefully lift the motor unit end and place it onto the step ladder to support its weight. The goal at this stage is to initially suspend the opener so it is approximately level and perpendicular to the garage door. The instructor then uses a strap or rope to temporarily hang the motor unit from a ceiling joist, ensuring it stays out of the way for the next steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vDc-m0cB_7o</video:player_loc>
      <video:duration>210</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11625-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dpyz32i5mQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Lifting Arm to Garage Door — Garage Door Opener Installation</video:title>
      <video:description>Once the motor unit and track are mounted, connect the lifting arm. This arm extends from the trolley on the opener&apos;s track to a bracket on the top section of the garage door. Use the provided pins and bolts to securely attach the arm to both the trolley and the door bracket. Ensure all connections are tight and the arm has appropriate clearance for the door&apos;s full travel path.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dpyz32i5mQY</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11625-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wehde081FFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Garage Door Arm to Trolley — Garage Door Opener Installation</video:title>
      <video:description>Attach the garage door arm from the door itself to the trolley mechanism on the opener&apos;s rail. This arm connects the door to the opener, allowing it to move up and down. Ensure the arm is properly aligned and securely fastened to both the door bracket and the trolley according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wehde081FFk</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11625-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JZHY11xw_xc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Door Bracket and Opener Arm — Garage Door Opener Installation</video:title>
      <video:description>Install the door bracket to the top panel of your garage door. This bracket will be the attachment point for the opener&apos;s main arm. Once the door bracket is secured, connect the opener&apos;s curved arm to this bracket using the provided pin. The video demonstrates how the carriage (the piece that moves along the rail) has a lever that allows it to be engaged or disengaged from the door arm. When the lever is down, it&apos;s disengaged (for manual operation), and when it&apos;s up, it engages the door arm so the opener can move the door. This mechanism is useful for power outages or manual door operation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JZHY11xw_xc</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11626-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dpyz32i5mQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Safety Electric Eye Sensors — Garage Door Opener Installation</video:title>
      <video:description>Mount the two electric eye sensors on either side of the garage door opening, approximately six inches (15 cm) from the ground. These sensors emit and receive an infrared beam. Use an impact driver to secure the mounting brackets, then attach the sensors. Route the low-voltage wiring from each sensor through a plastic conduit for protection, leading it up the wall and over to the opener unit. Connect the wires from both sensors to the designated terminals on the garage door opener. The sensors must be aligned so that the beam between them is unbroken; if the beam is interrupted, the door will not close or will reverse if already closing, providing crucial safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dpyz32i5mQY</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11626-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/In75UMfMpHg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Safety Sensors and Wall Console — Garage Door Opener Installation</video:title>
      <video:description>Install the safety sensors near the bottom of the garage door tracks, one on each side. Ensure they are aligned so their infrared beam is unbroken. Secure them to the door frame or track using screws and a drill/driver. Run the sensor wiring along the track and connect it to the corresponding terminals on the opener&apos;s motor head. Install the wall control console on an easily accessible wall inside the garage and connect its wiring to the opener. Use a staple gun to neatly secure all wires.</video:description>
      <video:player_loc>https://www.youtube.com/embed/In75UMfMpHg</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11626-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Safety Sensors — Garage Door Opener Installation</video:title>
      <video:description>Position the safety sensors, which typically consist of a sending unit and a receiving unit, near the bottom of the garage door tracks. Mark the desired height, usually 4 to 6 inches above the garage floor, for safety compliance. Drill pilot holes and securely fasten the sensor brackets to the garage door frame or tracks using the provided screws and a drill/driver. Insert the sensors into their brackets. Route the low-voltage wires from each sensor neatly along the wall and up to the motor unit. Strip about 1/4 inch of insulation from the ends of the wires and securely connect them to the appropriate terminals on each sensor using a screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11627-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire Motor Unit and Wall Control — Garage Door Opener Installation</video:title>
      <video:description>Connect the low-voltage wires from both safety sensors to the corresponding terminals on the main motor unit. Ensure that the solid white wire (or equivalent) from both sensors is twisted together and then inserted into one terminal, and the striped wire from both sensors is twisted together and inserted into the other terminal. Use a screwdriver to tighten the terminals, securing the wires. Neatly route all low-voltage wires along the ceiling and walls, securing them with wire clips and a hammer to prevent them from hanging loose or interfering with the door&apos;s operation. Finally, install the wall-mounted control button. Strip the ends of the wall control wires, connect them to the appropriate terminals on the back of the button unit, and then secure the unit to the wall using screws and a drill/driver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11627-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HhFTL8Fdqgg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Wires to Garage Door Opener — Garage Door Opener Installation</video:title>
      <video:description>Finally, connect the routed sensor wires to the garage door opener unit. Most openers have clearly marked terminals for safety sensors, often labeled &apos;IR Sensor&apos;, &apos;Photo Eye&apos;, or similar. Consult your specific garage door opener&apos;s manual for the correct terminals and wiring polarity. Typically, two low-voltage wires from each sensor will connect to these terminals. Ensure all connections are secure to prevent intermittent failures.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HhFTL8Fdqgg</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11627-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z6IFlBoSwjU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire Opener and Install Safety Photo-Eyes — Garage Door Opener Installation</video:title>
      <video:description>Wire the garage door opener motor to the control panel on the wall and connect the safety photo-eyes. The safety photo-eyes are crucial safety features that prevent the door from closing if an obstruction (like a person or pet) breaks the infrared beam between them. Proper wiring ensures that the opener functions correctly and adheres to safety standards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z6IFlBoSwjU</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11628-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3cuP1mbvDO8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Wall Control Button — Garage Door Opener Installation</video:title>
      <video:description>The wall control button, a Chamberlain MyQ unit, offers advanced features like programming the door to stay open for a specific time or a motion sensor to activate the light. First, strip the ends of the wires that will connect to the button. The terminals on the back of the button are labeled red and white; attach the corresponding wires. To mount the button, start by screwing in the bottom screw into the wall, leaving it loose enough so the button can slide down and hook onto it. Once the button is hooked, secure it with the top screw. Ensure the wires are neatly routed. Then, run the wires from the wall control button up to the main garage door opener unit. The opener has four color-coded terminals at the bottom for connections: the red wire from the button goes into the leftmost terminal, and the first white wire goes into the adjacent terminal (press down on the small button or tab next to the terminal with a screwdriver or thumbnail to insert the wire).</video:description>
      <video:player_loc>https://www.youtube.com/embed/3cuP1mbvDO8</video:player_loc>
      <video:duration>148</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11628-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/by_Eet6Lh78/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Sensors and Wall Remote — Garage Door Opener Installation</video:title>
      <video:description>Attach the safety sensor brackets to each side of the garage door opening, near the bottom. Mount the wall remote control in a convenient location inside the garage. Wire both the safety sensors and the wall remote to the motor unit. This typically involves connecting wires to specific terminals (often labeled red, white, or color-coded) on the back of the motor unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/by_Eet6Lh78</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11628-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_jHY-47luD8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire All Components — Garage Door Opener Installation</video:title>
      <video:description>Route all necessary wiring for the safety beams, wall button, and ceiling light. The presenter demonstrates routing the wires as neatly as possible, running them through the back side of the garage door opener unit to keep the installation clean. For the wall-mount button, connect the supplied wire to the corresponding lugs on the back of the button (red stripe to the &apos;R&apos; terminal, plain wire to the &apos;W&apos; terminal). Secure the wall button to the wall using the provided hardware. Finally, connect all the routed wires to the main garage door opener unit&apos;s terminal block, using a small flat-head screwdriver to press down on the tab for each terminal, insert the bare wire end, and release the tab to secure the connection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_jHY-47luD8</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11629-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SSYuqk4XGyQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program Door Limits — Garage Door Opener Installation</video:title>
      <video:description>Once all components are installed and powered, open the cover on the main garage door opener unit to access the programming buttons. Follow the instructions in the manual to set the door&apos;s open and closed travel limits. Typically, this involves putting the unit into &apos;learn mode&apos; by holding a specific button (e.g., the black button), manually moving the door to the desired open height, and then holding another button (e.g., the yellow button) to move the door to the desired closed position. This process teaches the opener the full range of motion for your specific garage door, ensuring it opens and closes to the correct points without excessive force or incomplete travel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SSYuqk4XGyQ</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11629-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nzC8sjABvfU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust Travel Limits — Garage Door Opener Installation</video:title>
      <video:description>After reassembling and mounting the opener, it&apos;s crucial to adjust the travel limits to ensure the door opens and closes correctly without over-extending or straining the motor. First, activate the opener to cycle it up and down without the garage door attached (keep the emergency release tripped). Observe where the trolley stops at the &apos;open&apos; and &apos;closed&apos; positions. If the travel is too far or not far enough, adjust the limit screws on the side of the opener. Each screw controls a different limit (e.g., &apos;up&apos; travel, &apos;down&apos; travel). Turn the screw in quarter-turn increments, testing the travel after each adjustment. On the presenter&apos;s opener, a diagram indicates that turning counter-clockwise for the &apos;down&apos; screw increases downward travel. Adjust until the trolley stops just shy of where it would normally connect to the door&apos;s bracket.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nzC8sjABvfU</video:player_loc>
      <video:duration>328</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11629-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wehde081FFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program and Test Garage Door Opener — Garage Door Opener Installation</video:title>
      <video:description>With the unit powered on, follow the programming steps in the manual to set the garage door&apos;s &apos;down&apos; and &apos;up&apos; positions. This typically involves using buttons on the motor unit or remote to guide the door to its fully closed and fully open states, allowing the opener to learn its travel limits. After setting the limits, thoroughly test the door&apos;s operation using the wall button and any remotes to ensure it opens and closes smoothly and fully.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wehde081FFk</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11630-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dpyz32i5mQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Testing &amp; Safety Check — Garage Door Opener Installation</video:title>
      <video:description>Test the new garage door opener&apos;s operation. Go to the exterior wireless keypad, enter the programmed code, and press the open/close button. Observe the door&apos;s movement, noting its quiet operation due to the belt drive. Next, perform a critical safety test: place a child&apos;s toy (like the scooter used earlier) in the path of the closing door. The door&apos;s safety sensors (electric eyes) should detect the obstruction, causing the door to immediately reverse and return to the fully open position, confirming the system&apos;s safety functionality. This verifies that the new opener adheres to modern safety standards, preventing accidents.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dpyz32i5mQY</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11630-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qh1Ri-Ym13E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Safety Obstruction Tests — Garage Door Opener Installation</video:title>
      <video:description>It&apos;s crucial to perform safety obstruction tests to ensure the opener functions correctly and safely. For the close cycle test, first press the remote button to open the door. Place a piece of timber approximately 40mm high on the floor directly under the door&apos;s path. Then, close the door using the remote. The door should strike the timber and automatically reverse (re-open). For an additional close cycle test, open the door again and place the opener&apos;s carton (or a similar object) in the center of the doorway. Close the door; it should strike the carton and readily reverse. To test the open cycle, with the door in the closed position, press a remote button to start opening the door. When the door reaches approximately halfway, firmly grab the door&apos;s bottom rail with your hand (or place a suitable object that creates resistance). The door should stop its upward movement. If the door fails any of these tests (does not reverse when closing or stop when opening), the force may be excessive and needs adjusting. Immediately put the opener into manual mode via the manual release cord and operate the door by hand, then call for service.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qh1Ri-Ym13E</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11630-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8J_KY2F1HKc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Garage Door Operation — Garage Door Opener Installation</video:title>
      <video:description>After manually operating the door and re-engaging the motor, it&apos;s crucial to test its automatic function. Use your garage door remote or the wall-mounted button to operate the door. Observe its movement to ensure it opens and closes smoothly and completely without any issues. This confirms that the motor is correctly re-engaged and the system is functioning as intended.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8J_KY2F1HKc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11614-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EYQuAjOC_SU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Window Frame for Structural Damage and Water Intrusion — Window Repair</video:title>
      <video:description>Next, thoroughly examine the window frame itself. Pay close attention to the corners and joints where different parts of the frame meet. Look for any areas where components have separated or cracked, as these can allow water to penetrate. Inspect for discoloration, particularly black areas, and gently probe any suspicious spots to see if the wood is soft, indicating rot. Even clad windows can suffer from water intrusion through tiny unsealed areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EYQuAjOC_SU</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11614-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IPC3xuUWplc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Examine Window Components for Damage — Window Repair</video:title>
      <video:description>After identifying potential leaks, continue your examination of the entire window unit. Check if there are loose or cracked panes in the window glass itself. Be sure to thoroughly examine any existing strips of caulk around the window for cracking or peeling. Also, check the weather stripping installed between the window frame and the wall for any signs of wear, damage, or gaps. Any of these elements may cause an air leak.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IPC3xuUWplc</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11614-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JSFC6_JGuVo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Window Assessment and Diagnosis — Window Repair</video:title>
      <video:description>In a real-world scenario for window repair, this segment would illustrate a detailed inspection process. Technicians would examine the entire window unit, including the sash, frame, sill, glazing, and hardware. They would look for signs of wood rot, cracks in the frame or glass, drafts, water intrusion, and worn or broken mechanical components like hinges, locks, and balances. A diagnostic report would typically be prepared to outline the required repairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JSFC6_JGuVo</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11615-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U1syZiCLrYs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Glazing Putty — Window Repair</video:title>
      <video:description>With all glass removed, you now need to remove the old glazing putty that held the original pane in place. Use a putty knife and a hammer to gently chip away the hardened putty from around the inner edges of the window frame. Work slowly and carefully to avoid damaging the wooden frame itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U1syZiCLrYs</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11615-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1u6u4-NliMk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Glass and Glazing and Measure — Window Repair</video:title>
      <video:description>The first step in replacing a broken window pane is to safely remove any remaining broken glass from the window frame. Wear heavy-duty gloves for protection and work slowly to avoid cuts. Once the glass fragments are removed, use a putty knife to scrape out all the old glazing compound, ensuring the frame is clean and clear for the new pane. After cleaning, measure the exact dimensions of the window opening. The new pane of glass should be slightly smaller than this opening to allow for easy fitting and expansion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1u6u4-NliMk</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11615-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QatHzo2Zr6w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Broken Glass and Old Putty — Window Repair</video:title>
      <video:description>Before starting, lay down plastic sheeting in the work area to protect surfaces and make cleanup easier, as this can be a messy job. The first step is to safely remove all broken glass from the window frame. If the glass is completely shattered, use a pair of pliers to carefully extract larger pieces. Always wear appropriate safety gear, including gloves and safety glasses, to protect yourself from cuts. Once the glass is removed, use a putty knife or paint scraper to remove all the old, hardened window putty or glazing beads from around the window opening, ensuring the frame is completely clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QatHzo2Zr6w</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11616-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SL9Om5pek1A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Glass Pane — Window Repair</video:title>
      <video:description>With the frame now clean and clear of old materials, carefully set the new glass pane into the window opening. Handle the glass with extreme caution to avoid breaking it or cutting yourself. Ensure the glass sits evenly within the rabbet of the frame, centered with the 1/8-inch clearance on all sides as planned during the measuring step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SL9Om5pek1A</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11616-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h3PWWiiUpko/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Glass Pane — Window Repair</video:title>
      <video:description>Carefully insert the newly cut glass pane into the clean window frame. Position the glass within the frame, ensuring the small 1/8 inch gap is maintained around all edges. It should slip into place easily; the instructor warns against forcing the glass, as this will lead to breakage. Once seated, you can proceed to secure it with glazing points.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h3PWWiiUpko</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11616-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PXJC_po_pPg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Glass and Glazing Points — Window Repair</video:title>
      <video:description>Carefully insert the newly cut glass pane into the prepared window frame. Press it firmly but gently into the bedding putty, ensuring it makes good contact with the putty all around. Once in place, secure the glass using glazing points. These small metal clips are pressed into the wood frame along the edges of the glass, holding the pane securely in position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PXJC_po_pPg</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11617-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KKe9huwuQxs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Frame and Sill Repair — Window Repair</video:title>
      <video:description>For minor wood rot, carefully remove the damaged wood using a chisel or screwdriver. Apply a wood hardener to strengthen the remaining wood, then fill the area with exterior-grade wood filler. For cracks or gaps in the frame or sill, apply a high-quality, paintable exterior caulk or sealant. Ensure a smooth, uniform bead. For larger structural issues, consider consulting a professional or replacing severely damaged sections of wood.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KKe9huwuQxs</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11618-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CGRUcYogW24/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Weatherstripping — Window Repair</video:title>
      <video:description>Begin installing the new weatherstripping into the clean channels of the window sash. The video shows a kerf-style compression weatherstrip being inserted into a groove. As the weatherstrip is fed into the channel, use a weatherstrip installation roller tool to firmly press it into place, ensuring a snug and consistent fit along the entire length. For enhanced sealing and durability, the video also shows a liquid being applied from a small bottle, which can be an adhesive or activator to secure the weatherstrip more permanently within the channel. Use scissors or snips to cut the weatherstrip to the exact required length at the corners.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CGRUcYogW24</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11618-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z8yIk_qLSas/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Weatherstrip — Window Repair</video:title>
      <video:description>Take the new weatherstrip and firmly press it into the cleaned channel, one side at a time. No additional adhesive is necessary as the weatherstrip is designed to fit snugly into the kerf. Ensure that the stile weatherstrip (the vertical pieces) properly overlaps the rail weatherstrip (the horizontal pieces) at the corners for a complete and effective seal. Once all sections of the weatherstrip are installed, carefully pick up the sash, preparing for reinstallation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z8yIk_qLSas</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11618-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CGRUcYogW24/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Weatherstripping — Window Repair</video:title>
      <video:description>With the window sash removed and placed on a flat surface (such as a stool), proceed to inspect and remove the existing, old weatherstripping. This typically involves pulling the worn-out seal out of its designated channel or groove along the edges of the sash. If the weatherstripping is brittle or adhered, a utility knife or scraper may be needed to carefully pry it out. Ensure all remnants of the old material are removed from the channels to prepare for the new installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CGRUcYogW24</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11619-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q34hSIQ29Q4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime and Paint Sash — Window Repair</video:title>
      <video:description>The final step involves priming and painting the window sash and the newly installed glazing beads. Before painting, painter&apos;s tape is applied along the edges of the glass to protect it from paint. A high-quality primer is applied first to ensure proper adhesion and a uniform base. Once the primer dries, the sash and beads are painted with a suitable exterior-grade paint, matching the original color of the historic window. This provides protection against the elements and restores the window&apos;s aesthetic appeal to its original glory. After the paint dries, the painter&apos;s tape is carefully removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q34hSIQ29Q4</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11619-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_Qk4KsrARsI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime and Paint Window Frames — Window Repair</video:title>
      <video:description>The final step, as shown by the finished product in the video, is to prime and paint the window frames. First, apply a high-quality exterior primer to all bare wood areas and previously painted surfaces to ensure good adhesion and uniform paint coverage. Once the primer is dry according to manufacturer instructions, apply two thin coats of exterior-grade paint (white, as seen in the video). Use an angled sash brush for precision, especially around the glass. Apply painter&apos;s tape to the glass edges if needed to ensure crisp paint lines. Allow adequate drying time between coats and before exposing the window to weather.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_Qk4KsrARsI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11619-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_Qk4KsrARsI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prime and Paint Window Frames — Window Repair</video:title>
      <video:description>The final step, as shown by the finished product in the video, is to prime and paint the window frames. First, apply a high-quality exterior primer to all bare wood areas and previously painted surfaces to ensure good adhesion and uniform paint coverage. Once the primer is dry according to manufacturer instructions, apply two thin coats of exterior-grade paint (white, as seen in the video). Use an angled sash brush for precision, especially around the glass. Apply painter&apos;s tape to the glass edges if needed to ensure crisp paint lines. Allow adequate drying time between coats and before exposing the window to weather.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_Qk4KsrARsI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11606-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYdJa8L-Vc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Rough Opening — Window Installation</video:title>
      <video:description>Before installing the new window, confirm that the rough opening is square. Use a level to check the sill; if it&apos;s not level, insert wedges (shims) as necessary until the rough opening is perfectly level. This preparation ensures the new window will fit correctly and operate smoothly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYdJa8L-Vc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11606-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/z1zR_k4GGBs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Window Opening — Window Installation</video:title>
      <video:description>With the old sashes and frame removed, inspect the remaining window opening for any damaged or rotten wood. Replace any compromised sections to ensure a solid foundation for the new window. Fill any existing holes to create a smooth, continuous surface where the new window will be screwed into the frame. Clean the entire opening thoroughly, removing all dust, debris, and loose paint chips, possibly using a vacuum cleaner. Next, apply flashing tape to the sill. Ensure the tape fits the full length of the sill and extends up the vertical leg of the stool, working the tape into the corners for maximum protection. Use a level to check the sill for levelness and any bowing. If necessary, place sill shims to correct any bowing and ensure proper leveling. Attach these shims with flashing tape to prevent any future movement once they are level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/z1zR_k4GGBs</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11606-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k0prTdwArlY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Window Opening — Window Installation</video:title>
      <video:description>Before beginning the removal process, carefully measure the width and height of the existing window opening. Use a tape measure to ensure all dimensions are correct and match the specifications of your new window. This critical step prevents fitting issues during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k0prTdwArlY</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11607-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/38dTAHb4gzs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Flashing Tape to Sill — Window Installation</video:title>
      <video:description>Measure and cut a piece of DuPont flexible flashing tape long enough to span the bottom sill of the window opening and extend approximately 6-8 inches up each side jamb. Carefully peel off the backing of the flashing tape and adhere it to the bottom sill. Ensure the tape is folded neatly over the edge of the sill to create a continuous seal. Press down firmly on the tape to eliminate any air bubbles and ensure strong adhesion, especially in the corners and along the edges. Apply a second piece if necessary to fully cover any exposed wood on the sill, overlapping the first piece slightly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/38dTAHb4gzs</video:player_loc>
      <video:duration>117</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11607-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9FTYirEK6Ps/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Sill Flashing — Window Installation</video:title>
      <video:description>Unroll the black flashing tape along the sill of the window opening. Ensure the tape covers the entire width of the sill and extends a few inches beyond each side. Use a utility knife to cut the flashing tape to the appropriate length. This piece of flashing will form the primary waterproof barrier at the bottom of the window opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9FTYirEK6Ps</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11607-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EOzkimq9ipo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flash the Sill and Sides — Window Installation</video:title>
      <video:description>To create a watertight seal, apply a layer of peel-and-stick flashing membrane (like Zip System Stretch Tape) over the sloped sill. First, partially peel back the backing from one end of the membrane. Align the membrane with the bottom of the window opening, ensuring it extends slightly beyond the rough opening on both sides. Carefully press the exposed sticky part onto the sill, then slowly pull the remaining backing while smoothing the membrane down and stretching it into the corners to form a continuous, watertight pan. This material is designed to stretch and conform without &apos;memory,&apos; meaning it won&apos;t bounce back once shaped. Ensure the membrane covers the top face of the clapboard and extends up the sides of the rough opening by several inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EOzkimq9ipo</video:player_loc>
      <video:duration>368</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11608-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C7m5iGzLBDo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Side Flashing Tape — Window Installation</video:title>
      <video:description>Next, apply standard flashing tape, such as &apos;ZIP System Flashing Tape&apos;, to the vertical side jambs of the window opening. Begin by peeling back a portion of the release liner and aligning the tape vertically along the edge of the rough opening, overlapping the previously installed sill tape. Press the tape firmly onto the sheathing and into the frame, ensuring it is smooth and wrinkle-free. Repeat this process for both vertical jambs. The tape should extend slightly beyond the top and bottom of the rough opening.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C7m5iGzLBDo</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11608-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kJnyTh1TmYw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flash the Jambs and Head — Window Installation</video:title>
      <video:description>With the sill flashing in place, proceed to flash the vertical jambs (sides) and the head (top) of the rough opening. Apply flashing tape to each jamb, extending it from the sill flashing upwards, ensuring it overlaps the sill tape. Then, apply flashing tape to the head, ensuring it overlaps the jamb tapes. The top flashing tape should be applied last to create a shingle-lap effect, directing water down and away. Ensure all tape is pressed firmly into place for optimal adhesion and to eliminate air pockets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kJnyTh1TmYw</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11608-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IFoclVW_vxY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Detail Side Jambs and Head — Window Installation</video:title>
      <video:description>To complete the flashing, apply flashing tape to the side jambs and the head (top) of the rough opening. For the side jambs, cut pieces of tape that extend from the top of the sill pan to above the head of the opening, ensuring they overlap the sill tape. For the head, apply a piece of tape that covers the entire width of the opening and extends over the side jamb tapes. This &apos;shingle-style&apos; overlapping ensures that water drains downwards and outwards. Finally, use a roller to firmly press down all applied tapes, ensuring maximum adhesion and a complete seal against air and water infiltration.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IFoclVW_vxY</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11609-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BbEMx_2huWc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place and Level the New Window — Window Installation</video:title>
      <video:description>With the rough opening prepared, carefully place the new window into the opening from the outside, ideally with a helper. Ensure it fits correctly. Once in place, use a level to check the window&apos;s levelness at the sill. Use small wooden shims to adjust the window until it is perfectly level. The goal is to set the window so that it operates smoothly and effortlessly. Continuously check the level as you place shims and make adjustments. The window should feel loose enough to adjust but snug enough to stay in place.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BbEMx_2huWc</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11609-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kuN7h6-i9hY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level and Secure Window — Window Installation</video:title>
      <video:description>Carefully lift and place the prepared window into the rough opening, resting its bottom frame on the previously placed shims. Once the window is roughly in place, use a long spirit level to check that the bottom sill of the window is perfectly level. Adjust the shims as necessary to achieve a level surface. After confirming the bottom is level, use an impact driver or power drill to fasten the bottom nailing flange to the framing with screws. Next, use the spirit level to check that the vertical sides of the window frame are plumb (perfectly vertical). Make any necessary adjustments using shims or by gently shifting the window. Once the sides are plumb, secure them by fastening the side nailing flanges to the framing with screws. It is recommended to use screws for fastening the window as they provide a more precise and secure installation compared to nails, and reduce the risk of damaging the window frame with a hammer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kuN7h6-i9hY</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11609-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/38dTAHb4gzs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set and Level the Window — Window Installation</video:title>
      <video:description>Carefully lift and position the double-hung window into the prepared rough opening. Ensure the window is centered within the opening, leaving equal space on both sides. Have a helper positioned inside the house to support the window from the interior while you work from the exterior. Once the window is roughly in place, use a level to verify that the bottom sill is perfectly level. Tack a roofing nail into the nailing flange on the bottom side of the window to temporarily secure it, allowing for minor adjustments.</video:description>
      <video:player_loc>https://www.youtube.com/embed/38dTAHb4gzs</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11610-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/72hzdFAuEag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shim and Level Window — Window Installation</video:title>
      <video:description>After placing the window, verify the spacing. Aim for approximately 3/8-inch of space on each side between the window frame and the rough opening studs. Begin shimming the window by inserting wooden shims between the window frame and the rough opening. Use a laser level to ensure the window is perfectly level and plumb. Tap the shims in gently with a hammer as needed. Check the window for square by measuring diagonally from corner to corner; the measurements should be identical. This step is critical for proper window operation and sealing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/72hzdFAuEag</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11610-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mTNfnnsZb5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Shim the New Window — Window Installation</video:title>
      <video:description>Place the new window into the rough opening and use shims to center it and create an even gap around the top, sides, and bottom. This ensures proper fit and allows for insulation. Once the shims are in place, use a level to verify that the window is perfectly plumb (vertical) and level (horizontal). Adjust the shims as necessary by adding or removing them until the window is correctly aligned and stable.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mTNfnnsZb5s</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11610-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9esOJYNqRAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit and Shim the New Window — Window Installation</video:title>
      <video:description>Place the new window into the rough opening for a preliminary fit check. Use shims (small wooden or plastic wedges) around the top, sides, and bottom of the window frame to create an even gap. Use a level to ensure the window is perfectly plumb (vertically straight) and level (horizontally straight). Adjust the shims as necessary to achieve even spacing and proper alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9esOJYNqRAc</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11611-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BbEMx_2huWc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Window Frame — Window Installation</video:title>
      <video:description>Once the window is leveled and plumbed with shims, it&apos;s time to secure it permanently. Locate the mounting screw holes on the window frame (often hidden under small plastic caps or stops). Using an impact driver or drill, drive the provided mounting screws through the frame and into the rough opening&apos;s studs. It&apos;s crucial to *set* the screws without fully tightening them at first, leaving them slightly loose. This prevents warping the vinyl frame. Ensure that your shims are directly behind where you are driving the screws to provide solid support. Once all screws are set, you can gently tighten them until they are snug, again being careful not to over-tighten and distort the frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BbEMx_2huWc</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11611-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLgzA-Q0JHY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Window with Shims and Screws — Window Installation</video:title>
      <video:description>Once the window is leveled and squared, perform a final check of the window&apos;s operation to ensure it slides freely without catching. Then, insert shims into the side and top gaps where needed, using nippers to break off any excess shim material flush with the frame. Use an 1/8 inch drill bit to drill pilot holes if your window frame does not have them. Secure the window using screws. The video recommends using number 8 galvanized screws or pan-head screws that will sink flush to prevent interference with window operation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLgzA-Q0JHY</video:player_loc>
      <video:duration>179</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11611-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kuN7h6-i9hY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Level and Secure Window — Window Installation</video:title>
      <video:description>Carefully lift and place the prepared window into the rough opening, resting its bottom frame on the previously placed shims. Once the window is roughly in place, use a long spirit level to check that the bottom sill of the window is perfectly level. Adjust the shims as necessary to achieve a level surface. After confirming the bottom is level, use an impact driver or power drill to fasten the bottom nailing flange to the framing with screws. Next, use the spirit level to check that the vertical sides of the window frame are plumb (perfectly vertical). Make any necessary adjustments using shims or by gently shifting the window. Once the sides are plumb, secure them by fastening the side nailing flanges to the framing with screws. It is recommended to use screws for fastening the window as they provide a more precise and secure installation compared to nails, and reduce the risk of damaging the window frame with a hammer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kuN7h6-i9hY</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11612-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kJnyTh1TmYw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flash Flanges and Final Seal — Window Installation</video:title>
      <video:description>Once the window is securely fastened, apply additional flashing tape over the side nailing flanges and then over the top nailing flange. This final layer of flashing ensures that the nailing flange is completely integrated into the WRB system, maintaining the shingle-lap effect to shed water. Finally, apply a continuous bead of exterior-grade caulk or sealant around the entire perimeter of the window frame, between the frame and the exterior finish (or the WRB if siding is not yet installed). This seals any remaining gaps and provides an additional layer of protection against air and water intrusion. The video shows a worker applying caulk around the perimeter of an installed window.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kJnyTh1TmYw</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11612-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k0prTdwArlY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Exterior Sealant — Window Installation</video:title>
      <video:description>Using a caulk gun, apply a heavy and continuous bead of high-quality sealant around the exterior perimeter of the window opening, directly on the existing frame. This sealant creates a primary weather barrier for the new window.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k0prTdwArlY</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11612-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yP0TumO8cTA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Exterior of Window — Window Installation</video:title>
      <video:description>Once the window is securely fastened, move to the exterior to seal the perimeter. Using a caulking gun, apply a continuous bead of exterior-grade sealant around the sides and top of the window frame where it meets the house siding or trim. It is crucial to leave the bottom edge of the window frame unsealed, as this provides a weep hole for any water that might get behind the window to drain out, preventing rot and water damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yP0TumO8cTA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11613-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K4CiRTg02rc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Window Frame and Trim — Window Installation</video:title>
      <video:description>Measure, cut, and install the interior wooden frame pieces (jamb extensions) that fill the gap between the window unit and the drywall opening. Secure these with a battery-powered finish nailer, ensuring they are flush with the drywall. Subsequently, measure, cut, and install the decorative outer trim (casing) and the bottom sill/apron piece. This step encloses the rough opening, reducing crevices where dust and debris can settle, and prepares the window for a final clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K4CiRTg02rc</video:player_loc>
      <video:duration>86</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11613-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Oz6tnXUL9zc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Trim and Finish — Window Installation</video:title>
      <video:description>After the window is installed, apply interior and exterior trim. For interior trim, the video uses 1x3 lumber for the sides and 1x4 for the bottom, ripping it to the exact width of the wall for a flat fit. Edges can be chamfered for a finished look. For exterior trim, use suitable lumber (e.g., 2x material cut down to size) to cover the gaps around the window. Ensure the exterior trim creates an even reveal around the window. Install flashing (e.g., corner flashing) over the top of the window, sliding it under existing siding or shakes for weather protection. Finally, liberally apply caulk to all exterior joints and seams to seal against moisture and air leaks. Allow the caulk to dry before painting the exterior trim white and removing any protective film from the window glass.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Oz6tnXUL9zc</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11613-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pVZZCJDexOc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Interior Trim — Window Installation</video:title>
      <video:description>To complete the aesthetic finish of the window, install the interior trim. Before removing the protective backing from the trim&apos;s adhesive, measure and cut each piece of trim to the appropriate length. Avoid cutting it too long. Once cut, press the trim firmly against the new window frame, peeling off the protective backing progressively as you adhere each section. The video highlights that the trim&apos;s width is typically about 3/8 inches smaller than the window frame. If any side pieces are too wide, the trim can be bent and torn along a pre-scored groove to achieve the correct, narrower width. The goal is to achieve a consistent 3/8-inch space between the trim and the window jams.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pVZZCJDexOc</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11603-1</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Stair Treads Installation</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11603-2</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Treads Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11603-3</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Treads Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11602-1</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stair Treads — Stair Treads Installation</video:title>
      <video:description>Starting from the top of the staircase, the homeowner carefully installs each stair tread. She begins by peeling off the protective plastic film from the adhesive backing. The tread is then aligned precisely with the previously marked tape lines, ensuring the back edge is flush with the riser. Once aligned, she firmly presses the tread onto the step, making sure it adheres well, especially over the bullnose (the rounded edge of the step). This process is repeated for each individual stair tread and for the larger custom pieces on the landings. The homeowner notes that the adhesive is designed not to damage the existing hardwood stairs, making it a suitable option for temporary or non-permanent installations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11602-2</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Treads Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11602-3</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zb2dGhifZhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Self-Adhesive Carpet Stair Treads — Stair Treads Installation</video:title>
      <video:description>Begin by peeling off the clear protective film from the self-adhesive backing of a new light-colored, textured carpet stair tread. Carefully position the tread onto a clean wooden stair, aligning its back edge precisely with the riser. Use a long strip of green painter&apos;s tape, applied vertically along the wall side of the stairs, as a guide to ensure consistent placement and a straight line. Once positioned, press down firmly across the entire surface of the tread, working from back to front, to ensure good adhesion and minimize air bubbles. Repeat this process for all remaining stairs, working your way down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zb2dGhifZhE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11605-1</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nCu4uIwBOOE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark the Center of the Stairs — Stair Treads Installation</video:title>
      <video:description>For proper runner placement, locate and mark the center of each stair tread. Measure the width of the tread and divide it by two to find the center line. Mark this center line on your tread. Then, measure and mark the center of your carpet runner. Align the center of your runner with the line marked on the tread, and mark the outer edge of each side of the runner using painter&apos;s tape. Repeat these markings on each tread of the stairs to ensure consistent alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nCu4uIwBOOE</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11605-2</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PxQ_H_9wl6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparing for Carpet Runner Installation — Stair Treads Installation</video:title>
      <video:description>The creator measures the width of each stair tread and the width of the carpet runner. She subtracts the runner&apos;s width from the stair&apos;s width and divides the result by two to determine the equal distance needed on either side of the runner for perfect centering. Individual pieces of green painter&apos;s tape are cut and applied to each step, marking the precise alignment points for the runner. This creates a visual guide to ensure a straight installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PxQ_H_9wl6E</video:player_loc>
      <video:duration>96</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11605-3</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3-aHWCr7hg0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Stair Centers — Stair Treads Installation</video:title>
      <video:description>Using a measuring tape, find the exact center of each stair step. Mark this center point with a small piece of painter&apos;s tape. This central guideline will help in accurately positioning the carpet runner later. You can also mark the desired outer edges of where the runner will sit if you prefer additional alignment guides.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3-aHWCr7hg0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11604-1</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Installation and Final Inspection — Stair Treads Installation</video:title>
      <video:description>Repeat the placement and pressing process for all remaining carpet stair treads, moving systematically up or down the staircase. Ensure each tread is aligned consistently with the previous one, maintaining even spacing and straightness. After all treads are installed, perform a final inspection. Visually check for any misalignments or loose edges. Walk up and down the stairs to confirm that each tread feels firmly secured and does not shift underfoot, ensuring both safety and a polished aesthetic for your newly enhanced staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11604-2</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — Stair Treads Installation</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11604-3</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Stair Treads Installation</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11601-1</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Treads Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11601-2</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zb2dGhifZhE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Self-Adhesive Carpet Stair Treads — Stair Treads Installation</video:title>
      <video:description>Begin by peeling off the clear protective film from the self-adhesive backing of a new light-colored, textured carpet stair tread. Carefully position the tread onto a clean wooden stair, aligning its back edge precisely with the riser. Use a long strip of green painter&apos;s tape, applied vertically along the wall side of the stairs, as a guide to ensure consistent placement and a straight line. Once positioned, press down firmly across the entire surface of the tread, working from back to front, to ensure good adhesion and minimize air bubbles. Repeat this process for all remaining stairs, working your way down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zb2dGhifZhE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11601-3</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Treads Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11600-1</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Treads Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11600-2</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Smooth Stairs — Stair Treads Installation</video:title>
      <video:description>Before starting the installation, ensure that the existing stairs are thoroughly cleaned and smoothed. Use a broom to remove any dust, debris, or loose particles from the risers and treads. A clean and smooth surface is essential for proper adhesion and a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11600-3</loc>
    <lastmod>2026-11-08T01:49:19.133Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Treads Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-08T01:49:19.133Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11597-1</loc>
    <lastmod>2026-11-07T17:17:21.105Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — non-slip finish</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-07T17:17:21.105Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11597-2</loc>
    <lastmod>2026-11-07T17:17:21.105Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — non-slip finish</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-07T17:17:21.105Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11597-3</loc>
    <lastmod>2026-11-07T17:17:21.105Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Treads — non-slip finish</video:title>
      <video:description>Starting from the bottom step of the staircase, carefully align the first prepared stair tread onto the wooden step. Ensure the tread is centered, positioned straight, and covers the desired area of the step. Once satisfied with the placement, firmly press the tread down across its entire surface, paying close attention to the edges and corners, to securely bond the adhesive to the wood. The installer in the video kneels and crawls up the stairs, applying significant body weight to ensure good contact. Repeat this alignment and pressing process for all remaining stairs, working your way up the staircase one tread at a time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-07T17:17:21.105Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11596-1</loc>
    <lastmod>2026-11-07T17:17:21.105Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — non-slip finish</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-07T17:17:21.105Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11596-2</loc>
    <lastmod>2026-11-07T17:17:21.105Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stair Surface — non-slip finish</video:title>
      <video:description>Although not explicitly demonstrated in the video, it is crucial to ensure the staircase is clean before installing the treads. Thoroughly clean each wooden stair surface to remove any dust, dirt, pet hair, or debris. This preparation ensures optimal adhesion of the non-slip backing, preventing the treads from shifting and maintaining a neat appearance. Use a vacuum cleaner for loose particles, followed by a damp cloth and a mild cleaner if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-07T17:17:21.105Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11596-3</loc>
    <lastmod>2026-11-07T17:17:21.105Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — non-slip finish</video:title>
      <video:description>Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-07T17:17:21.105Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11599-1</loc>
    <lastmod>2026-11-07T17:17:21.105Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — non-slip finish</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-07T17:17:21.105Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11599-2</loc>
    <lastmod>2026-11-07T17:17:21.105Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — non-slip finish</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-07T17:17:21.105Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11599-3</loc>
    <lastmod>2026-11-07T17:17:21.105Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — non-slip finish</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-07T17:17:21.105Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11591-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qFusHPPmOFo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Lawn Mower Blade — Lawn Mower Blade Sharpening</video:title>
      <video:description>After tipping the mower with the spark plug facing up, locate the two nuts holding the blade in place underneath the mower deck. Before attempting to loosen the nuts, place a piece of wood between the blade and the mower deck&apos;s edge to prevent the blade from rotating while you apply force. This also helps prevent bending the blade. Put on heavy-duty leather gloves for protection. Use a socket wrench with the correct size socket to remove the nuts. Using the wrong size socket can strip the nuts, making removal difficult or impossible. Once the nuts are loose, carefully remove the blade.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qFusHPPmOFo</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11591-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f1uE3u9o6Xo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Lawnmower Blade — Lawn Mower Blade Sharpening</video:title>
      <video:description>Once the spark plug is disconnected, carefully lay your lawnmower on its side. Locate the bolt in the center of the blade. Using the correct size wrench, hold the blade firmly with one hand (wearing gloves is recommended) and push down on the wrench to loosen the bolt. Most lawnmower blades unscrew in a counter-clockwise direction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f1uE3u9o6Xo</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11591-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rQMADbUhxmw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Mower Blade — Lawn Mower Blade Sharpening</video:title>
      <video:description>Insert a block of wood between the mower blade and the deck to prevent the blade from rotating while you work. Take note of the blade&apos;s orientation and how any washers or blade adapters are positioned, as this will be important for reinstallation. Using a socket wrench, loosen the center bolt of the blade by turning it counterclockwise. Once loose, carefully remove the bolt, any washers, and the blade adapter, followed by the mower blade itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rQMADbUhxmw</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11592-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f1uE3u9o6Xo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sharpen Blade with a File — Lawn Mower Blade Sharpening</video:title>
      <video:description>Secure the blade tightly in a vise, ensuring that the cutting edge you are working on is exposed. Take your metal file and carefully follow the original angle of the blade&apos;s cutting edge. Draw the file along the edge, applying consistent pressure, until you achieve a nice sharp edge. Repeat this process for the other cutting edge of the blade, ensuring both sides are equally sharp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f1uE3u9o6Xo</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11592-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LNqQaN7wYfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sharpen Blade with Angle Grinder — Lawn Mower Blade Sharpening</video:title>
      <video:description>With the blade removed, secure it horizontally in a workbench vise. Using an angle grinder, carefully follow the existing bevel (cutting edge angle) of the blade. The goal is to grind until a clean, shiny edge is visible along the entire cutting surface. Maintain a consistent angle throughout the process to ensure even sharpening and proper blade balance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LNqQaN7wYfI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11592-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/geVcLQqXokw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sharpen the Blade with a File — Lawn Mower Blade Sharpening</video:title>
      <video:description>Secure the blade (you can hold it on your lap as shown or in a vise) and use a medium-grit metal file with a comfortable handle. Identify the factory edge angle on the blade. File only in one direction, pushing the file away from you along the cutting edge. Do not rub the file back and forth, as this is less effective and can damage the file. Repeat filing strokes consistently along the entire cutting edge (approximately 5-6 inches long on each side of the blade) until a new, sharp edge is established and most nicks are removed. If the blade is heavily damaged, you might need to work both sides of the edge to restore it, similar to sharpening a knife, aiming for one sharp side and one flat side. Focus only on the actual cutting edge, not the entire length of the blade.</video:description>
      <video:player_loc>https://www.youtube.com/embed/geVcLQqXokw</video:player_loc>
      <video:duration>97</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11593-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CfDwDFkmVQQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Balance the Blade — Lawn Mower Blade Sharpening</video:title>
      <video:description>After sharpening, it is crucial to balance the blade. An unbalanced blade can cause excessive vibration in the mower, leading to poor cuts and potential damage to the mower or engine. To check the balance, insert a small nail into a piece of wood, ensuring it&apos;s firmly secured. Carefully hang the sharpened blade from its center hole onto the nail. If the blade sits perfectly horizontal, it is balanced. If one side dips down, it is too heavy. To correct this, remove a small amount of metal from the heavier side (usually the back of the cutting edge) using your file or grinder, then recheck the balance. Repeat this process until the blade is balanced.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CfDwDFkmVQQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11593-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qFusHPPmOFo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Balance the Mower Blade — Lawn Mower Blade Sharpening</video:title>
      <video:description>After sharpening, it&apos;s crucial to balance the blade. An unbalanced blade can cause excessive vibration, premature wear on mower components, and an uneven cut. You can use a dedicated plastic blade balancer by placing the blade&apos;s center hole over the balancer&apos;s cone. The heavier side of the blade will drop. Alternatively, if you don&apos;t have a balancer, you can insert a small nail into a piece of wood and hang the blade by its center hole on the nail. The heavier side will tilt downwards. To balance the blade, grind or file off a small amount of metal from the heavy side. Re-check the balance repeatedly until the blade sits perfectly level, indicating an even weight distribution.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qFusHPPmOFo</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11593-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f1uE3u9o6Xo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Balance the Sharpened Blade — Lawn Mower Blade Sharpening</video:title>
      <video:description>After sharpening, it&apos;s crucial to check the blade&apos;s balance. An unbalanced blade can cause severe vibrations in the lawnmower, leading to uneven cuts and potential damage to the engine or bearings. To check the balance, hammer a nail into the side of a sturdy workbench or a wooden block. Then, carefully hang the lawnmower blade on the nail through its center mounting hole. The blade should balance out pretty evenly. If one side drops lower, it indicates that side is heavier. Remove the blade and file a little more metal off the heavier end until it balances correctly when re-tested.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f1uE3u9o6Xo</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11594-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CfDwDFkmVQQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall the Blade — Lawn Mower Blade Sharpening</video:title>
      <video:description>Once the blade is perfectly sharp and balanced, it&apos;s time to reinstall it on the mower. Carefully position the blade back onto the mower shaft, ensuring it&apos;s oriented correctly (the cutting edges should face towards the ground when the mower is upright). Reinsert the blade bolt and tighten it by hand. Then, use the screwdriver or block of wood to brace the blade again, and use your socket wrench to firmly tighten the bolt clockwise. Ensure it is very secure, but do not overtighten.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CfDwDFkmVQQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11594-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/A-v1C1Pupjw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall the Blade — Lawn Mower Blade Sharpening</video:title>
      <video:description>With the blade sharpened and perfectly balanced, reattach it to your lawnmower. Ensure it is installed in the correct orientation, with the bevel facing upwards or as you noted during removal in Step 1. Tighten the bolt holding the blade down very securely to prevent it from coming loose and flying off during operation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/A-v1C1Pupjw</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11594-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WsZ272F001M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reinstall the Mower Blade — Lawn Mower Blade Sharpening</video:title>
      <video:description>To reinstall the newly sharpened and balanced blade, first double-check that the battery and safety switch are still removed from the mower for safety. Carefully align the blade with the central shaft and the indexing pins on the mower deck. Place the inner flange, then the blade, followed by the washer, and finally the bolt onto the mower in the exact same order they were removed. Reinsert the screwdriver into the fixing hole to stabilize the blade. Now, rotate the blade clockwise until its edge firmly rests against the screwdriver. Use your 9/16 inch wrench to tighten the blade bolt by turning it clockwise until it is securely fastened. Ensure the bolt is tightened to the manufacturer&apos;s recommended torque specifications if available in your mower&apos;s manual.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WsZ272F001M</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11595-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xjomd_09xAA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Mower and Reconnect Spark Plug — Lawn Mower Blade Sharpening</video:title>
      <video:description>Gently tilt the lawn mower back to its upright position. Once stable, reattach the spark plug boot by pushing it firmly onto the spark plug until it clicks into place. The mower is now ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xjomd_09xAA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11595-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sOUqpVgrM-I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect the Spark Plug Wire — Lawn Mower Blade Sharpening</video:title>
      <video:description>After all necessary repairs and reassembly of engine components, reattach the spark plug wire. Firmly push the spark plug boot back onto the spark plug tip until it clicks securely into place. This ensures a proper electrical connection for engine ignition.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sOUqpVgrM-I</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11595-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yiiT-Bf8MsY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reconnect the Spark Plug — Lawn Mower Blade Sharpening</video:title>
      <video:description>Once all work on the lawn mower blade is complete and the blade lock tool has been removed, the final safety step is to reattach the spark plug boot firmly onto the spark plug terminal. This restores the electrical connection, allowing the engine to start. Double-check that all components are properly reassembled and tightened before attempting to start the mower.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yiiT-Bf8MsY</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11586-1</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11586-2</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e42OOnatZvs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Align and Install Carpet Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin by taking one pre-made carpet stair tread and positioning it on the first wooden stair. Carefully align the front edge of the carpet tread with the front edge of the stair. Ensure the tread is centered horizontally on the step, leaving an even gap on both sides. Once the tread is perfectly aligned, firmly press it down onto the stair surface, working from the front edge towards the back. This action activates the adhesive backing or secures the non-slip material integrated into the tread, ensuring it adheres securely to the wooden stair. Repeat this process for each subsequent stair, maintaining consistent alignment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e42OOnatZvs</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11586-3</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11583-1</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CtnOYw-UEDw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select, Order, and Unpack Custom Stair Treads — Stair Tread Installation</video:title>
      <video:description>Recognizing the limitation of traditional stair runners for a floating staircase, the homeowner identifies &quot;Oak Valley Designs&quot; as a specialist in custom stair treads. They review various fabric options, including different patterns and textures, as shown through samples. Once selected, the custom treads are received and unboxed, revealing the chosen design (a dark pattern with white and brown accents) and individual protective plastic wrapping.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CtnOYw-UEDw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11583-2</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0l3UWfmoDiY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Problem and Solution — Stair Tread Installation</video:title>
      <video:description>The video begins by showcasing a beautiful wooden staircase. The narrator highlights that while aesthetically pleasing, these wooden stairs are dangerously slippery, posing a risk for falls. The solution introduced are &apos;removable and replaceable carpet stair treads&apos; from &apos;Oak Valley Designs&apos;, which are presented as a high-quality option to address the safety concern.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0l3UWfmoDiY</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11583-3</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Introduction and Product Overview — Stair Tread Installation</video:title>
      <video:description>The presenter introduces Oak Valley Designs&apos; Bullnose Carpet Stair Treads, explaining their key features. These treads are manufactured in North Georgia and feature a triple-reinforced, rounded front edge designed to give the staircase the look and safety of a traditional runner. They come with a built-in pad and a pressure-sensitive adhesive with a peel-and-release liner on the back, making installation super easy and non-damaging to wooden steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11589-1</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Stair Tread Installation</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11589-2</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — Stair Tread Installation</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11589-3</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11582-1</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — Stair Tread Installation</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11582-2</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — Stair Tread Installation</video:title>
      <video:description>Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11582-3</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Installation</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11584-1</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Stair Tread Installation</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11584-2</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Staircase — Stair Tread Installation</video:title>
      <video:description>Before installing the carpet stair treads, thoroughly clean the entire staircase. Begin by sweeping all wooden steps to remove any loose dust, dirt, or debris. Once swept, use a damp cloth to wipe down each step and the front edge (riser/nose) to ensure no fine dust or residue remains. This creates a clean, smooth surface for the adhesive treads to bond effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11584-3</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Smooth Stairs — Stair Tread Installation</video:title>
      <video:description>Before starting the installation, ensure that the existing stairs are thoroughly cleaned and smoothed. Use a broom to remove any dust, debris, or loose particles from the risers and treads. A clean and smooth surface is essential for proper adhesion and a professional finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11588-1</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11588-2</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FAXkwFKyfuc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Treads — Stair Tread Installation</video:title>
      <video:description>Starting from the bottom step of the staircase, carefully align the first prepared stair tread onto the wooden step. Ensure the tread is centered, positioned straight, and covers the desired area of the step. Once satisfied with the placement, firmly press the tread down across its entire surface, paying close attention to the edges and corners, to securely bond the adhesive to the wood. The installer in the video kneels and crawls up the stairs, applying significant body weight to ensure good contact. Repeat this alignment and pressing process for all remaining stairs, working your way up the staircase one tread at a time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FAXkwFKyfuc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11588-3</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SsGTuZzNrvU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Remaining Treads — Stair Tread Installation</video:title>
      <video:description>With the first tread securely in place, proceed to install the remaining carpet stair treads. Follow the same procedure as the first tread for each subsequent step. Carefully position each tread, ensuring consistent spacing and alignment with the previously installed treads. Press down firmly across the entire surface of each tread to ensure it adheres properly. The video shows the rapid progression of installing multiple treads, highlighting the ease of the process. Pay close attention to maintaining a uniform appearance across all steps. Take your time to ensure each tread is perfectly aligned before pressing it down firmly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SsGTuZzNrvU</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11585-1</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11585-2</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Stair Tread Installation</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11585-3</loc>
    <lastmod>2026-11-19T07:26:34.255Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-19T07:26:34.255Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11575-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TuLzSa7hlYI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power and Verify — Ceiling Fan Repair</video:title>
      <video:description>Locate your home&apos;s circuit breaker panel and turn off the breaker that controls the power to the old ceiling fan. To ensure the power is completely off, use a circuit tester (or voltage detector) on the fan&apos;s light socket or wires. Wear safety glasses and work gloves throughout the process for protection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TuLzSa7hlYI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11575-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H7mWKUcFMbk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Power and Prep — Ceiling Fan Repair</video:title>
      <video:description>Begin by ensuring electrical safety. Go to your home&apos;s circuit breaker panel and locate the breaker that controls the power to the ceiling fan. Flip the breaker switch to the &apos;off&apos; position. After turning off the power, return to the fan and use the light switch to confirm that the power is indeed off. It is highly recommended to use a voltage tester to verify no electrical current is present in the fan&apos;s wiring before proceeding with any disconnections.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H7mWKUcFMbk</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11575-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WHrP_dVP-eU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Power Disconnection and Verification — Ceiling Fan Repair</video:title>
      <video:description>Before attempting any electrical work on the ceiling fan, locate the circuit breaker that controls the power to the fan. Turn off the power at the main electrical panel by flipping the appropriate breaker to the &apos;OFF&apos; position. It is crucial to verify that the power is indeed off by attempting to turn on the fan or any lights connected to it. Use a non-contact voltage tester to confirm that no power is flowing to the fan&apos;s wiring. This critical step ensures your safety and prevents electrical shock.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WHrP_dVP-eU</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11576-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kulCFfqdRX0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Fan Blades for Looseness — Ceiling Fan Repair</video:title>
      <video:description>The first step is to visually confirm if the ceiling fan is wobbling, which is typically more noticeable by the movement of the light kit rather than the blades themselves. Once a wobble is observed, carefully inspect each fan blade. Gently hold the tip of each blade and try to move it slightly up and down. This manual check helps to identify any looseness at the base where the blade attaches to the fan&apos;s motor housing. Feeling for excessive play or movement indicates that the screws securing the blade may be loose and contributing to the wobble.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kulCFfqdRX0</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11576-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WDbghDRgA6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tighten Fan Blade Screws — Ceiling Fan Repair</video:title>
      <video:description>Next, inspect all screws that attach the fan blades to the fan&apos;s motor housing. Over time, these screws can loosen, contributing to wobble. Use a screwdriver to tighten any loose fan blade screws. Do not overtighten, as this could strip the threads or damage the blade.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WDbghDRgA6c</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11576-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ivxxBdiuiIw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Blade-to-Bracket Screws — Ceiling Fan Repair</video:title>
      <video:description>Begin by inspecting the screws that attach each fan blade to its bracket on the motor housing. Use a screwdriver to ensure that all these screws are securely tightened. The video demonstrates how loose screws can cause the blade bracket to angle downwards, leading to imbalance and wobble. The presenter visually checks and tightens several screws, noting that even a quarter turn can indicate a loose screw.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ivxxBdiuiIw</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11578-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tlrQV9sHZTA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Address Non-Working Light — Ceiling Fan Repair</video:title>
      <video:description>If the fan&apos;s light kit isn&apos;t working properly, start by tightening any loose light bulbs and replacing any that are burned out. If these actions don&apos;t resolve the issue, try resetting the remote control. To do this, turn off the power at the circuit breaker for the fan. Then, remove the batteries from the remote. Wait for 10 seconds, then replace the batteries. Turn the power back on at the breaker, and activate the light kit. If the light still doesn&apos;t work, you may need to consult the fan&apos;s product page on The Home Depot website for details on replacement parts for the light kit or contact customer service.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tlrQV9sHZTA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11578-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S-3QAFMDzFI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test for Power at Light Wiring — Ceiling Fan Repair</video:title>
      <video:description>After removing the light assembly, locate the quick-disconnect wiring on the main fan unit. If your lights are switched separately from the fan, ensure the light switch is in the &apos;on&apos; position. Turn the power back ON at the circuit breaker. Using a multimeter set to AC voltage mode, carefully insert the probes into the quick-disconnect slots that normally connect to the light assembly. One probe should contact the white neutral wire, and the other should contact the hot wire for the lights (typically red, blue, or black). A healthy circuit should read approximately 120 volts AC. If your multimeter reads significantly lower (e.g., 5-6 volts as demonstrated), it indicates that a power limiter is malfunctioning and preventing full voltage from reaching the lights.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S-3QAFMDzFI</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11578-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tIQFVcKrw-s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Confirm Light Failure and Remove Bulbs — Ceiling Fan Repair</video:title>
      <video:description>Begin by observing the non-working ceiling fan light. Activate the wall switch for the light to confirm it does not illuminate. The fan itself may still function, indicating the issue is isolated to the lighting component. Note that the fan in the video is a Kichler brand, and troubleshooting steps may differ for other manufacturers. Carefully unscrew each of the existing light bulbs from their sockets and inspect them to ensure they are not burnt out, as this is a common reason for lights failing. If the bulbs appear functional, set them aside.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tIQFVcKrw-s</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11577-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TaK11PBsw40/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Capacitor — Ceiling Fan Repair</video:title>
      <video:description>The video begins with the presenter introducing the problem of a slow ceiling fan and the first, most &apos;complicated&apos; solution: checking the capacitor. The presenter explains that the capacitor is responsible for starting the fan and making it spin, and it can wear out over time. To access it, you need to open the fan&apos;s housing. It is crucial to shut off the power to the fan before proceeding. Once the housing is open, locate the capacitor, which typically looks like a small black box connected with wires. The presenter then demonstrates how to test the capacitor using a digital multimeter. First, discharge the capacitor by touching the two wires together. Then, set the multimeter to the highest Ohm setting. Connect the meter&apos;s leads to the capacitor&apos;s terminals (e.g., red to red, white to black). Observe the multimeter reading: a short capacitor will show very low resistance, an open capacitor will show no movement, and a good capacitor will initially show low resistance and then move towards infinity. If the capacitor is faulty, find its model number and other specifications to purchase a suitable replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TaK11PBsw40</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11577-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RIUtBWJeJDE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Motor and Identify Capacitor — Ceiling Fan Repair</video:title>
      <video:description>Carefully open the fan housing, typically from the backside where the motor is located. Once the motor is exposed, locate two wires attached to a small rectangular or cylindrical component. This component is the fan motor start capacitor. Examine the capacitor to identify its specifications, particularly the capacitance (e.g., 2.0 microfarad) and voltage rating (e.g., 400V). The video shows a capacitor labeled &apos;BL-T MK &quot;SH&quot; 2.0µF ±10%b 400V~ DB 50/60 Hz -25/70 HSFFPU 10/94&apos;.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RIUtBWJeJDE</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11577-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/go4hAPqYZnU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access and Inspect Old Capacitor — Ceiling Fan Repair</video:title>
      <video:description>With the power safely disconnected, remove the lamp assembly of the ceiling fan by unscrewing the three screws holding it in place. This will expose the internal wiring and the capacitor. Inspect the existing capacitor. A faulty capacitor often shows visible signs such as a hump on its surface, indicating internal swelling or damage. The presenter points out a slight hump on his capacitor, confirming it is indeed bad.</video:description>
      <video:player_loc>https://www.youtube.com/embed/go4hAPqYZnU</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11579-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tlrQV9sHZTA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Wiring Connections — Ceiling Fan Repair</video:title>
      <video:description>After turning off the power at the breaker, remove the canopy or housing of the ceiling fan to expose the wiring connections. Carefully inspect all wire nuts and connections to ensure they are properly seated and secure. Look for any loose or disconnected wires. The video displays a guide for correct wiring: Green Wire (Copper Ground), Black Motor (Black Supply), Blue/Striped Lighting (Black Supply), White Motor (White Supply). If any wires are loose, reconnect them securely using appropriate wire nuts. This ensures the fan is receiving power correctly and safely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tlrQV9sHZTA</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11579-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cPCAQymkNvE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Stator Coils for Damage — Ceiling Fan Repair</video:title>
      <video:description>After disassembling the fan, examine the stator coils closely. Look for any signs of burning, charring, or discolored insulation, particularly where the lead wires connect to the coils. In this case, although the main coils appear intact, one of the thin lead wires connecting to the running coil is burnt and completely detached. This explains the lack of continuity in the running coil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cPCAQymkNvE</video:player_loc>
      <video:duration>103</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11579-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RDHFRdMooYA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Internal Component Inspection and Cleaning — Ceiling Fan Repair</video:title>
      <video:description>Once the motor is exposed, inspect it for accumulated dust, which can cause overheating. Use compressed air to blow out any dust from the motor. Examine the stator windings, which are copper wires wrapped around soft iron pieces. Look for any signs of burning, blackening, or discoloration, indicating overheating damage. Check the rotor (an aluminum and soft iron piece) and the motor shaft. Inspect the capacitor, the switch, and the oscillation gearing to ensure they appear intact and connected properly. The windings in this fan appear to be in good condition, ruling out burnt windings as the cause of failure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RDHFRdMooYA</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11580-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M7kg3UygYWk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble Light Kit and Locate Capacitor — Ceiling Fan Repair</video:title>
      <video:description>With the power OFF, remove the screws securing the ceiling fan&apos;s light kit or housing. Carefully lower the light fixture and unplug any wires connecting it to the main fan assembly. Locate the capacitor, which is typically a rectangular box with multiple wires, often secured with sticky backing or glued in place. Inspect the capacitor for visible damage, such as bulges or &apos;bubbles,&apos; which indicate it&apos;s blown out and needs replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M7kg3UygYWk</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11580-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/go4hAPqYZnU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access and Inspect Old Capacitor — Ceiling Fan Repair</video:title>
      <video:description>With the power safely disconnected, remove the lamp assembly of the ceiling fan by unscrewing the three screws holding it in place. This will expose the internal wiring and the capacitor. Inspect the existing capacitor. A faulty capacitor often shows visible signs such as a hump on its surface, indicating internal swelling or damage. The presenter points out a slight hump on his capacitor, confirming it is indeed bad.</video:description>
      <video:player_loc>https://www.youtube.com/embed/go4hAPqYZnU</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11580-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ePzdXJEPmJo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify and Remove Faulty Capacitor — Ceiling Fan Repair</video:title>
      <video:description>Once the light kit is lowered, locate the wiring harness connecting the light kit to the fan&apos;s main body. Disconnect this wire connector. The narrator identifies a melted and damaged speed control unit, which is actually a capacitor, as the culprit. This capacitor is characterized by having five wires: three exiting from one side and two from the other. The melted appearance indicates a definite failure. The old capacitor&apos;s wires will be cut, leaving enough length on the fan&apos;s side for reconnection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ePzdXJEPmJo</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11581-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Cva3o8x52Og/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test Fan — Ceiling Fan Repair</video:title>
      <video:description>Once all fan components are securely assembled and wired, return to your circuit breaker or fuse box and turn the electrical power back on. Test the fan&apos;s operation using the pull chains or remote control, if applicable. If your fan has a DC motor, it may go through a self-calibration process for about five minutes, making small back-and-forth movements before operating normally. Allow this process to complete before assessing its full functionality. Verify both the fan speeds and light operation (if installed).</video:description>
      <video:player_loc>https://www.youtube.com/embed/Cva3o8x52Og</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11581-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CWy6PIsE8F8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test Fan — Ceiling Fan Repair</video:title>
      <video:description>Once all fan components are assembled and securely installed, return to your home&apos;s electrical panel and flip the circuit breaker for the fan back to the &apos;on&apos; position. Then, go to the wall light switch and turn it to &apos;on&apos;. Finally, use the fan&apos;s remote control to test all functions: turn the fan on and off, adjust fan speeds (high, medium, low), and operate the light (on, off, dimming if applicable). Confirm that everything is working as expected.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CWy6PIsE8F8</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11581-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BRjjJuURHxg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test Fan — Ceiling Fan Repair</video:title>
      <video:description>With the ceiling fan fully reassembled, return to your home&apos;s electrical breaker box and flip the switch to restore power to the circuit. Back at the fan, test its functionality by pulling the new chain. Cycle through the different settings to ensure the fan operates correctly at all speeds and that any attached lights (if controlled by this chain) function properly. The fan should now be fully operational.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BRjjJuURHxg</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11574-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UdolrDw4GUs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Epoxy to Cure — Epoxy Floor Coating</video:title>
      <video:description>After the epoxy coating and decorative chips have been applied, allow sufficient time for the floor to cure before resuming normal use. The surface should be ready for light foot traffic in approximately 12 to 16 hours. For heavy item placement, such as storage shelves or tools, wait 24 to 48 hours. Most importantly, allow the floor to cure for a full three days before parking vehicles on the surface. This ensures maximum durability and prevents hot tire pickup or damage to the coating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UdolrDw4GUs</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11574-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rWGB41OICf0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow for Proper Curing — Epoxy Floor Coating</video:title>
      <video:description>After applying the clear topcoat, allow sufficient time for the epoxy to dry and cure. For light foot traffic, such as walking on the floor, wait a minimum of 24 hours. For moving in heavy equipment, vehicles, or placing heavy items back into the garage, it is crucial to wait 3 to 4 days. This allows the epoxy to fully cure and achieve its maximum hardness, chemical resistance, and durability, preventing premature damage or marring of the new surface. Patience during this curing phase is key to a long-lasting and successful epoxy floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rWGB41OICf0</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11574-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kdTKl78VHpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow to Cure and Final Inspection — Epoxy Floor Coating</video:title>
      <video:description>Once the epoxy coating has been applied to the entire floor, it is crucial to allow it to cure completely according to the manufacturer&apos;s recommendations. Curing times typically range from 24 to 72 hours for light foot traffic and longer for vehicle traffic. During this period, avoid walking on the floor, moving heavy objects, or introducing any moisture. After the full curing period, the garage floor will be transformed into a beautiful, durable, and easy-to-clean surface, resistant to oil stains, chemicals, and general wear and tear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kdTKl78VHpQ</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11567-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kdTKl78VHpQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Degrease Concrete Surface — Epoxy Floor Coating</video:title>
      <video:description>Begin by sweeping the entire garage floor to remove all loose dust and debris. For more efficient debris removal, use a leaf blower to clear out any remaining particles. Once cleared, wet the entire concrete surface using a garden hose. Apply Rust-Oleum Concrete Cleaner &amp; Degreaser directly onto the wet floor, ensuring even distribution. Use a stiff broom brush to vigorously scrub the entire concrete surface, paying particular attention to any oil stains, grease, or heavily soiled areas. For stubborn chunks of glue or gum, use a putty knife to scrape them off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kdTKl78VHpQ</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11567-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SMMf1kcqr7M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Debris and Degrease Floor — Epoxy Floor Coating</video:title>
      <video:description>Use a hammer and a chisel or scraper to remove any hardened debris, paint drips, or other adhered materials from the concrete surface. Next, apply Rust-Oleum Cleaner &amp; Degreaser for Concrete directly to the floor. The presenter noted it was easier to apply the degreaser first to a dry floor to see where it was going, contrary to instructions which suggested wetting the surface first. After applying, scrub the entire floor vigorously with a scrub brush. Ensure no areas dry out completely during this process. A good quality scrub brush is recommended for efficient cleaning of large areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SMMf1kcqr7M</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11567-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1OTFDI7hMeE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Concrete Floor — Epoxy Floor Coating</video:title>
      <video:description>Before any other work begins, it is crucial to thoroughly clean the concrete floor. Start by sweeping the entire area using a soft bristle sweeping brush to remove all loose dirt, dust, and debris. To prevent concrete dust from becoming airborne, which can be a health hazard and make cleaning less effective, lightly dampen the floor beforehand using a plant mister or spray bottle. It&apos;s important to avoid using a domestic vacuum cleaner for this task, as the fine concrete dust can easily damage its motor or filter system. Additionally, lay down a tarpaulin or protective sheet over any nearby furniture or items to shield them from dust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1OTFDI7hMeE</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11568-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l84GYuPs7tc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Etch and Scrub — Epoxy Floor Coating</video:title>
      <video:description>Working in manageable sections, begin sprinkling the mixed concrete etch solution onto the wet concrete floor using the watering can. As soon as a section is covered with the solution, use a stiff-bristled scrub brush to work it into the concrete surface. Apply firm pressure and scrub the area thoroughly, ensuring good contact between the etch solution and the concrete. Keep the surface wet at all times during this step; if any part of the section starts to dry, re-wet it with a little more etch solution or plain water from the hose. A slight fizzing action indicates the etch is actively working.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l84GYuPs7tc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11568-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2FC0I6i6qek/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub Acid Etch into Concrete — Epoxy Floor Coating</video:title>
      <video:description>After applying the diluted acid solution, use a deck scrub brush to vigorously scrub the concrete surface. This action helps to agitate the acid, ensuring it penetrates and etches the concrete uniformly, creating a rougher profile suitable for epoxy adhesion. Pay close attention to areas that may have built-up grime or old paint. Continue scrubbing until the entire surface has been treated. If, after rinsing, the concrete surface does not feel sufficiently rough or porous, a second application and scrub might be beneficial. The goal is to achieve a texture similar to 100-grit sandpaper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2FC0I6i6qek</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11568-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CgbDEQ7U8wM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Etch Surface — Epoxy Floor Coating</video:title>
      <video:description>For uncoated concrete surfaces or bare concrete exposed after stripping, it&apos;s crucial to etch the surface to create a profile that allows the paint to bond properly. Pour a concrete etcher, such as BEHR Premium® Concrete &amp; Masonry Cleaner &amp; Etcher, over the entire bare concrete area using a watering can for even application. Use a scrub brush to work the etcher into the concrete surface, ensuring good coverage and penetration. You should see light foaming, indicating the etcher is working. After allowing it to dwell for the recommended time (check product instructions), rinse the surface thoroughly with a garden hose until all etcher residue is removed. Repeat if the surface doesn&apos;t feel like 150-grit sandpaper.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CgbDEQ7U8wM</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11569-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J8sSWX0FblQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch and Repair Concrete Cracks — Epoxy Floor Coating</video:title>
      <video:description>With the floor completely dry after etching, prepare to repair any cracks or holes using Rust-Oleum Concrete Patch and Repair. First, use a wire brush to remove any remaining dirt, dust, or debris from the cracks to ensure proper adhesion of the patch. Lay a clean piece of cardboard scrap on the floor for mixing. Put on protective gloves. This product is a two-part epoxy system, consisting of Part A (activator) and Part B (base). Mix a small amount of the two parts together on the cardboard using a putty knife, ensuring a 2:1 ratio (two parts of Part B to one part of Part A). Only mix what you anticipate using within 20 to 30 minutes, as the epoxy will harden quickly. Mix until the mixture achieves a uniform gray color and a putty-like consistency. Avoid mixing the components within their original containers. Use the putty knife to spread the mixed epoxy evenly onto any areas that require repair, pressing it into cracks and divots. Level and smooth the patched areas using the putty knife. Once all problem areas are patched, allow the repair to cure for 8 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J8sSWX0FblQ</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11569-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/takc-e6Q8a0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair Concrete Cracks — Epoxy Floor Coating</video:title>
      <video:description>Carefully apply a crack patch material, such as Stonecoat Crack Patch, into all prepared concrete cracks. Ensure the material fully fills the cracks and then use a trowel or flat edge to smooth and level the patch with the surrounding concrete surface. Allow it to cure according to the manufacturer&apos;s instructions. Once cured, you may need to lightly grind the patched areas again to ensure they are perfectly flush with the rest of the floor, as shown in the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/takc-e6Q8a0</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11569-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3DPGtmnQ_qg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair Concrete Imperfections — Epoxy Floor Coating</video:title>
      <video:description>Inspect the concrete surface for any cracks, divots, or spalled areas. Using a high-quality concrete repair material (e.g., an epoxy patching compound or cementitious filler), apply the filler into these imperfections. Use a trowel or hand (wearing gloves) to smooth the repair material flush with the surrounding concrete. Allow the patching material to cure according to the manufacturer&apos;s instructions. Once cured, these patched areas may require light grinding or sanding to ensure they are perfectly level and profiled for the next coating step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3DPGtmnQ_qg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11570-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ROZqk4cadGo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mixing and Applying the Primer — Epoxy Floor Coating</video:title>
      <video:description>The first layer to be applied is a primer, which prepares the concrete for the epoxy coating and acts as a moisture barrier. The primer is typically mixed in a bucket using a drill with a mixing paddle. Once mixed, it is poured directly onto the floor in sections and spread evenly using a roller. This primer is crucial as it prevents moisture from rising through the concrete and causing the epoxy to blister or peel later. Allow the primer to dry for 3-4 hours or overnight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ROZqk4cadGo</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11570-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1cIjZBUf-nk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Primer to the Floor — Epoxy Floor Coating</video:title>
      <video:description>Before applying epoxy to the main floor, wear spike shoes to allow movement across the wet surface without disturbing the coating. Pour the mixed moisture seal epoxy primer in thin, meandering ribbons directly onto the concrete floor. Use an 18-inch wide silicone-tipped magic trowel to initially spread the epoxy evenly, aiming for a thin, consistent layer. Then, backroll the entire area using a 1/4-inch microfiber roller on a pole to even out any high points and ensure uniform coverage. Finally, cross-hatch the rolled surface (roll left-to-right, then front-to-back) to eliminate lap lines and create a perfectly smooth, level base.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1cIjZBUf-nk</video:player_loc>
      <video:duration>91</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11570-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-q8YUWBxk3E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply High-Solids Epoxy Primer — Epoxy Floor Coating</video:title>
      <video:description>Mix the two components (Part A and Part B) of the high-solids epoxy primer thoroughly in a mixing bucket using a drill with a mixer attachment. High-solids epoxy contains minimal solvent, ensuring that over 90% of the material remains on the floor, providing superior durability compared to low-solids, water-based DIY kits. Pour the mixed primer onto the prepared floor in manageable sections. Use a squeegee to spread the epoxy evenly, then immediately backroll it with a roller for uniform coverage. The slower setting time of epoxy allows for better penetration into the concrete, creating a much stronger bond. Wear spiked shoes to walk on the wet epoxy without disturbing the application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-q8YUWBxk3E</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11571-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/l9qQW40qTmE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix the Epoxy Coating — Epoxy Floor Coating</video:title>
      <video:description>Epoxy coatings are typically a two-part system: a resin (Part A) and a hardener (Part B). It is critical to precisely measure and mix these components according to the manufacturer&apos;s specified ratios. Pour the Part A resin into a large mixing bucket, then add the Part B hardener. Use a drill equipped with a mixing paddle to thoroughly blend the two components for 2-3 minutes. Scrape the sides and bottom of the bucket during mixing to ensure all material is fully incorporated. Mix slowly to avoid introducing air bubbles, which can cause imperfections in the final coating. Once mixed, the epoxy has a limited &apos;pot life&apos; (working time), so prepare to apply immediately.</video:description>
      <video:player_loc>https://www.youtube.com/embed/l9qQW40qTmE</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11571-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5w2Rrp8iKiY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mixing Epoxy Base Coat — Epoxy Floor Coating</video:title>
      <video:description>Before application, the epoxy base coat must be precisely mixed. The narrator emphasizes the importance of using high-quality epoxy products, differentiating them from cheaper alternatives that might not last. The specific ratio used in this professional application is two quarts of &apos;Part A&apos; (resin) to one quart of &apos;Part B&apos; (hardener). This three-quart mixture is designed to cover approximately 180 square feet of floor space. The mixing process involves using a drill equipped with a mixing paddle, ensuring it&apos;s done at a low speed for 2.5 minutes to achieve a homogeneous blend without introducing excessive air bubbles. Workers will wear spiked shoes, allowing them to walk on the wet epoxy without disturbing the freshly applied coating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5w2Rrp8iKiY</video:player_loc>
      <video:duration>95</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11571-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Dl-Kxvu7ow/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix Epoxy Base Coat — Epoxy Floor Coating</video:title>
      <video:description>The epoxy base coat consists of at least two components (Part A and Part B) that must be mixed thoroughly in specific ratios to initiate the curing process. In a clean bucket, first add Part A, then carefully pour in Part B, ensuring all material is added according to manufacturer specifications. Using a heavy-duty drill equipped with a spiral mixing paddle, mix the components for several minutes (typically 2-3 minutes), scraping the sides and bottom of the bucket to ensure uniform blending. Proper mixing is critical for the epoxy to cure correctly and achieve its intended properties.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Dl-Kxvu7ow</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11572-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Dm_9vzXipWw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Spread and Roll Out Epoxy — Epoxy Floor Coating</video:title>
      <video:description>After cutting in the edges, pour a generous amount of epoxy onto the floor in sections. Using a squeegee with light pressure, spread the epoxy evenly across the floor. The goal is to distribute the epoxy without pushing too hard, which could remove too much material. Immediately follow with a roller on an extension pole to smooth out any lines left by the squeegee and ensure a uniform coating. Work systematically across the floor, squeegeeing in one direction and rolling in the perpendicular direction to achieve the smoothest finish. If you notice any uneven spots, you can roll over them again before the epoxy cures.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Dm_9vzXipWw</video:player_loc>
      <video:duration>166</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11572-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlNHQ7tJG6A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply 100% Solids Epoxy Color Coat — Epoxy Floor Coating</video:title>
      <video:description>While wearing spiked shoes, pour the freshly mixed epoxy color coat directly onto the cured vapor barrier, working in sections that can be managed within the epoxy&apos;s pot life. Use a squeegee to spread the epoxy evenly across the surface, ensuring consistent coverage. Immediately follow with a roller to &quot;back-roll&quot; the area, smoothing out any squeegee marks and ensuring the material is evenly distributed and free of bubbles. Work your way across the entire floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlNHQ7tJG6A</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11572-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J7vPymQcfs8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Epoxy Base Coat — Epoxy Floor Coating</video:title>
      <video:description>Immediately after mixing, begin applying the epoxy base coat to the floor, as it has a limited pot life. Pour a continuous ribbon of the mixed epoxy directly onto the concrete surface in a manageable section. Using a long-handled roller with a suitable nap (typically 3/8-inch or 1/2-inch shed-resistant roller cover), spread the epoxy evenly across the floor. Work in small sections, maintaining a wet edge to ensure a seamless finish and prevent lap lines. To avoid leaving footprints or disturbing the wet epoxy, wear specialized epoxy spike shoes, which allow you to walk across the freshly applied coating. Ensure full, even coverage over the entire area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J7vPymQcfs8</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11573-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlNHQ7tJG6A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix and Apply Urethane Top Coat — Epoxy Floor Coating</video:title>
      <video:description>After the epoxy base coat is cured, and sanded/cleaned if necessary, prepare the urethane top coat. This is typically a two-part material that needs to be mixed thoroughly with a drill and paddle mixer. Due to its faster drying time (shorter pot life), mix only what can be applied quickly. Begin by carefully &quot;cutting in&quot; the perimeter edges and corners of the floor using a paintbrush. Then, while wearing spiked shoes, pour the mixed urethane onto the floor in sections, spread it thinly and evenly with a squeegee, and immediately back-roll the area with a roller to ensure a smooth, uniform, and bubble-free final finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlNHQ7tJG6A</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11573-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4pC1WJ9hmqY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrape Excess Chips and Apply Clear Topcoat — Epoxy Floor Coating</video:title>
      <video:description>After the epoxy base coat and chips have dried for approximately 8 hours, it&apos;s time for the final layers. First, use a scraper tool to remove any loose or excess decorative chips from the surface. This ensures a smooth finish for the topcoat. Once the loose chips are removed, apply the &apos;2-Part Clear Epoxy Topcoat&apos;. The video states three kits were needed, costing $315 in total. Apply the clear topcoat evenly across the entire floor using a roller, ensuring full coverage to seal in the chips and provide a protective, durable finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4pC1WJ9hmqY</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11573-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ROZqk4cadGo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Applying Protective Urethane Top Coat — Epoxy Floor Coating</video:title>
      <video:description>The final step is to apply a urethane top coat over the dried epoxy base coat. This top coat provides enhanced durability, scratch resistance, and protection for the epoxy layer. It can be a clear or pigmented urethane, matching the color of the epoxy. Similar to the epoxy, the urethane top coat is mixed and then applied by pouring it onto the floor in sections and spreading it evenly with a roller, working to achieve a smooth, self-leveling finish. This protective layer ensures a long-lasting and aesthetically pleasing floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ROZqk4cadGo</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11565-1</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fit Riser Piece — DIY Stair Risers</video:title>
      <video:description>After cutting, bring the prepared riser piece back to the stairs and carefully fit it into place without adhesive. This &apos;dry fit&apos; allows you to check for a perfect fit and make any final minor adjustments to the cut before permanently gluing it down. Ensure it sits flush and snugly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11565-2</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Y8qj3js1rUw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit Riser Plank — DIY Stair Risers</video:title>
      <video:description>Before applying adhesive, perform a dry test-fit of the pre-cut riser plank. Ensure that the plank fits snugly against the walls and is flush (or very nearly flush) with the top edge of the existing tread directly above it. Once satisfied with the fit, temporarily remove the plank to prepare for adhesive application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Y8qj3js1rUw</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11565-3</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fit Tread and Nosing — DIY Stair Risers</video:title>
      <video:description>Once the stair tread and nosing pieces are cut, bring them back to the stairs for a dry fit. Place them into their final positions without adhesive to ensure all cuts are perfect and the pieces fit snugly against the riser and along the stair&apos;s edges. Make any necessary micro-adjustments at this stage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11563-1</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Riser — DIY Stair Risers</video:title>
      <video:description>Start the installation by taking the first pre-cut riser. Using a caulking gun, apply polyurethane construction adhesive in an &apos;S&apos; shape along the entire backside of the riser. Carefully place the riser into its designated position on the staircase, ensuring you leave a 1/16 inch expansion gap all the way around it. Secure the riser by driving one finish nail into each of the four corners, then adding two more nails in the center, one at the top and one at the bottom, using your finish nailer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11563-2</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S-FUthZ8aU0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Risers — DIY Stair Risers</video:title>
      <video:description>Insert one end of the riser into the stair frame, ensuring the 5-degree bevel is on top. Rock the riser into place, sliding it into the routed grooves. The bevels should allow it to fit easily. Use a gauge block to position the front edge of the riser slightly higher (about 1/16 to 1/8 inch) than the planned tread height. This ensures space for adhesive and prevents the tread from sitting proud. Tap the riser with a rubber mallet if needed to achieve the desired position. Secure the riser by driving nails from the top of the riser into the stringer using a nail gun.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S-FUthZ8aU0</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11563-3</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9iOsbprpe5g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Retro Risers — DIY Stair Risers</video:title>
      <video:description>To install the new retro risers, first apply a generous, serpentine-patterned bead of construction adhesive, specifically PL Premium from Loctite (as it is the recommended adhesive), to the back surface of the cut riser board. Carefully lift the riser into its designated position, pressing it firmly against the old riser and ensuring the top edge meets the underside of the subtread&apos;s front edge. Once accurately positioned, secure the riser with several finish nails, spaced evenly along the top and bottom edges, using a Porter Cable finish nail gun. This procedure is then repeated for all remaining risers on the staircase, creating a solid and visually appealing vertical surface for each step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9iOsbprpe5g</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11561-1</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TcUQuwLup8c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Riser Length with Tread Gauge — DIY Stair Risers</video:title>
      <video:description>Work in small batches of 4-5 risers and treads at a time. To measure the exact length of each riser, use a Collins Tread Gauge. Loosen one side of the gauge, position it tight against the skirt board, and tighten it down. Ensure it&apos;s flush with the skirt board along the entire length. Then, align the other end of the tread gauge with the edge of the skirt board on the opposite side. This provides the exact length required for the riser, accounting for any inconsistencies in the wall or stringer. Carefully pick up the gauge to transfer the measurement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TcUQuwLup8c</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11561-2</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2rkFnsTztog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Risers — DIY Stair Risers</video:title>
      <video:description>Use a stair tread jig to measure the exact dimensions of each riser. Place the jig on the stair, adjust its arms to fit snugly against the side stringers and the top of the current tread, and then lock it in place. Take the jig to your riser material (e.g., plywood), place the jig on it, and mark the cut lines with a pencil. Repeat this process for each riser, as each stair will likely have slightly different dimensions. Cut the marked riser pieces using a miter saw, carefully aligning the blade with your pencil lines. Label the back of each cut riser with its corresponding stair number and its top edge to maintain organization, as each piece is unique.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2rkFnsTztog</video:player_loc>
      <video:duration>131</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11561-3</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S-FUthZ8aU0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Risers — DIY Stair Risers</video:title>
      <video:description>To measure for a riser, place the stair tread gauges into the stair frame opening. Loosen the wing nuts on the gauges, push them tight against the sides of the stair stringer, and then retighten them to secure the measurement. Use a pencil to mark the right and left sides of the stair stringer on the gauges to avoid confusion later. The video also notes that the riser will have a 5-degree bevel on both end cuts and on its top edge, which is crucial for a tight fit and allowing adhesive to penetrate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S-FUthZ8aU0</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11562-1</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BLYTBrKnnmk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Caulk and Paint Risers and Stringers — DIY Stair Risers</video:title>
      <video:description>To achieve a seamless and professional look, caulk and paint the risers and stringers. Begin by carefully applying painter&apos;s tape to protect the edges of the stained treads and ensure clean lines for your paint and caulk. Then, apply caulk (such as Alex Plus caulk) to all seams where the risers intersect with the treads, and also where the treads meet the stringers. This fills any gaps and imperfections. Once the caulk is dry, paint the risers and stringers to your desired color. The narrator chose an ultra-pure white, semi-gloss paint for a bright and clean appearance. Apply paint with a paintbrush, covering all newly caulked areas and existing stringer surfaces. Allow the paint to dry completely between coats.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BLYTBrKnnmk</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11562-2</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fTh9RuhZAtY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Paint Risers and Caulk Edges — DIY Stair Risers</video:title>
      <video:description>Once the stained and sealed treads are fully dry, tape off the edges of the treads with painter&apos;s tape to create a clean line. Paint the risers (the vertical part of the stairs) with white paint. After the paint dries, carefully remove the painter&apos;s tape. Finally, use trim caulk to fill any remaining small gaps between the stained treads and the painted risers, or along the side edges of the treads where they meet the wall. Smooth the caulk with a wet finger for a seamless finish. This step helps to cover any minor imperfections or short cuts and gives the stairs a professional, finished look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fTh9RuhZAtY</video:player_loc>
      <video:duration>201</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11562-3</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AI1poE8dn10/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Caulk and Paint — DIY Stair Risers</video:title>
      <video:description>To achieve a seamless and clean finish, apply painter&apos;s tape along all edges where the treads, risers, and stringers meet. Then, use an acrylic caulk, such as DAP Alex Fast Dry, to fill all gaps and seams. Ensure a smooth bead of caulk for a professional look. Allow the caulk to dry before painting. Once dry, paint all primed stringers and risers with your chosen white paint. After the paint has dried, carefully remove all painter&apos;s tape to reveal crisp, clean lines and a beautifully finished staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AI1poE8dn10</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11566-1</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Riser — DIY Stair Risers</video:title>
      <video:description>Starting from either the top or bottom of the staircase, measure the width and height of one riser. Then, using a circular saw, table saw, or miter saw with a fine-tooth blade, cut the riser material 1/8 inch shorter than the measured width and 1/8 inch shorter than the measured height. This deliberate sizing leaves small gaps that will be filled with caulk later for a clean, sealed finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11566-2</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2rkFnsTztog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Risers — DIY Stair Risers</video:title>
      <video:description>Use a stair tread jig to measure the exact dimensions of each riser. Place the jig on the stair, adjust its arms to fit snugly against the side stringers and the top of the current tread, and then lock it in place. Take the jig to your riser material (e.g., plywood), place the jig on it, and mark the cut lines with a pencil. Repeat this process for each riser, as each stair will likely have slightly different dimensions. Cut the marked riser pieces using a miter saw, carefully aligning the blade with your pencil lines. Label the back of each cut riser with its corresponding stair number and its top edge to maintain organization, as each piece is unique.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2rkFnsTztog</video:player_loc>
      <video:duration>131</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11566-3</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/f83D7gp11jM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Riser Material to Size — DIY Stair Risers</video:title>
      <video:description>Take the melamine-coated particle board pieces, now marked with the exact riser dimensions, and cut them to size. A miter saw is used for these cuts, providing accuracy and clean edges essential for a professional finish. This ensures each riser fits perfectly between the treads and against the walls.</video:description>
      <video:player_loc>https://www.youtube.com/embed/f83D7gp11jM</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11564-1</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SeY45UfRq68/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand and Clean Risers — DIY Stair Risers</video:title>
      <video:description>Using P180 sandpaper, sand down all stair risers to create a smooth surface. This removes any imperfections, old paint, or rough spots. After sanding, use a dusting brush to thoroughly brush away all dust particles from the risers and adjacent areas, ensuring a clean surface for paint adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SeY45UfRq68</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11564-2</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XLFbxLEUPpk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand Stair Risers — DIY Stair Risers</video:title>
      <video:description>Using P180 sandpaper, sand down all stair risers. The goal is to make the surface smooth and remove any existing imperfections or previous finishes. This creates a better profile for the primer and paint to adhere to, ensuring a long-lasting and even finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XLFbxLEUPpk</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11564-3</loc>
    <lastmod>2026-11-01T20:58:12.715Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XLFbxLEUPpk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Dust — DIY Stair Risers</video:title>
      <video:description>After sanding, use a dusting brush to thoroughly brush away all dust particles from the risers and surrounding areas. It&apos;s crucial to remove all traces of dust to prevent it from getting trapped in the paint, which can lead to a gritty or uneven finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XLFbxLEUPpk</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-01T20:58:12.715Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11559-1</loc>
    <lastmod>2026-11-01T12:03:45.527Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m0TM4PCC8Tw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Creating Custom Templates for Each Step — Curved Stair Tread Measurement</video:title>
      <video:description>First, use painter&apos;s tape to mark the desired outline of the carpet runner on the stair treads, particularly around the quarter round and edges. Then, unroll the brown paper over the first tread and secure it temporarily with painter&apos;s tape. Use a pencil or marker to meticulously trace the exact shape of the stair tread onto the paper. Once traced, cut out the paper template with scissors or a utility knife. Repeat this process for all six pie-shaped steps, carefully numbering each template to maintain order. Secure the templates in place with a hammer stapler to prevent movement while tracing and cutting. Remember to account for the orientation of each step when numbering and preparing the templates, as they will be flipped for cutting the carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m0TM4PCC8Tw</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-01T12:03:45.527Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11559-2</loc>
    <lastmod>2026-11-01T12:03:45.527Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for First Winder Step — Curved Stair Tread Measurement</video:title>
      <video:description>Begin by taking a roll of kraft paper and unrolling it onto the second winder step (the first winder step to be templated). Line up one straight edge of the paper along the back edge of the tread, against the riser of the next step. Use an electric stapler to secure the paper in the middle of the riser, making sure the paper is flat and conforms to the step&apos;s shape. Fold the paper neatly around the nosing (the front edge of the step) and along the side edge of the winder. Secure it again with staples in the middle, ensuring staples are placed where they will be covered by the finished carpet runner and do not damage the visible part of the stairs if they were real finished stairs. Use a utility knife to carefully cut along the edges of the step, forming the exact shape of the winder tread and riser. This creates the first paper template. The presenter mentions that on actual stairs, the nosing would be thicker than the demo stairs, and emphasizes care when using the knife to avoid damaging the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>108</video:duration>
      <video:publication_date>2026-11-01T12:03:45.527Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11559-3</loc>
    <lastmod>2026-11-01T12:03:45.527Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for Second Winder Step — Curved Stair Tread Measurement</video:title>
      <video:description>Repeat the templating process for the next winder step using a fresh piece of kraft paper. This involves aligning the paper, securing it with staples, folding it around the nosing and side edges, and cutting it to the exact shape of the step. As with the previous template, mark the runner&apos;s width, center line, and straight edges. Crucially, ensure that the measurements (e.g., 28 inches wide) for the runner remain consistent across all winder steps to maintain a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-11-01T12:03:45.527Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11558-1</loc>
    <lastmod>2026-11-01T12:03:45.527Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Curved Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-01T12:03:45.527Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11558-2</loc>
    <lastmod>2026-11-01T12:03:45.527Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — Curved Stair Tread Measurement</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-01T12:03:45.527Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11558-3</loc>
    <lastmod>2026-11-01T12:03:45.527Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Subfloor and Measure Riser — Curved Stair Tread Measurement</video:title>
      <video:description>Before beginning the installation, ensure the subfloor of the stairs is thoroughly clean. Then, use a stair tread templating tool to accurately measure the dimensions of the stair riser. This tool is crucial because stairs are rarely perfectly square, allowing for precise transfer of measurements to the flooring material.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-01T12:03:45.527Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11560-1</loc>
    <lastmod>2026-11-01T12:03:45.527Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Curved Stair Tread Measurement</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-01T12:03:45.527Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11560-2</loc>
    <lastmod>2026-11-01T12:03:45.527Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads with Template Tool — Curved Stair Tread Measurement</video:title>
      <video:description>Utilize a specialized stair measuring tool, often referred to as a stair jig or tread template tool, to accurately capture the exact length and precise angles of each individual stair tread. Carefully adjust the tool to fit snugly against the walls and any existing nosing, ensuring that it provides a perfect, custom template for the laminate cut that will follow. This step is critical for ensuring a seamless and gap-free fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-01T12:03:45.527Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11560-3</loc>
    <lastmod>2026-11-01T12:03:45.527Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Curved Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-01T12:03:45.527Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11555-1</loc>
    <lastmod>2026-11-01T11:42:51.724Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Pipe Shelf Installation</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-01T11:42:51.724Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11555-2</loc>
    <lastmod>2026-11-01T11:42:51.724Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Pipe Shelf Installation</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-01T11:42:51.724Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11555-3</loc>
    <lastmod>2026-11-01T11:42:51.724Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Pipe Shelf Installation</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-01T11:42:51.724Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11556-1</loc>
    <lastmod>2026-11-01T11:42:51.724Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Pipe Shelf Installation</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-01T11:42:51.724Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11556-2</loc>
    <lastmod>2026-11-01T11:42:51.724Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Pipe Shelf Installation</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-01T11:42:51.724Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11556-3</loc>
    <lastmod>2026-11-01T11:42:51.724Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Pipe Shelf Installation</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-01T11:42:51.724Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11557-1</loc>
    <lastmod>2026-11-01T11:42:51.724Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Your Drawing — Pipe Shelf Installation</video:title>
      <video:description>Once the sub-treads are exposed, consult the provided Stair Supplies engineered tread drawings. Verify that all the new treads are accounted for and that their dimensions, such as tread width, tread depth, and nosing depth, match the specifications on the drawing. Use a tape measure to confirm these dimensions. This crucial step helps prevent errors during the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-01T11:42:51.724Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11557-2</loc>
    <lastmod>2026-11-01T11:42:51.724Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Pipe Shelf Installation</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-01T11:42:51.724Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11557-3</loc>
    <lastmod>2026-11-01T11:42:51.724Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Pipe Shelf Installation</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-01T11:42:51.724Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11545-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vDc-m0cB_7o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount the Opener Assembly — Garage Door Opener Installation</video:title>
      <video:description>Position a sturdy step ladder directly under the header bracket. Carefully lift the assembled rail and motor unit, connecting the end of the rail (the part without the motor) to the header bracket using the supplied clevis pin and loop. Ensure the pin is securely inserted. Next, carefully lift the motor unit end and place it onto the step ladder to support its weight. The goal at this stage is to initially suspend the opener so it is approximately level and perpendicular to the garage door. The instructor then uses a strap or rope to temporarily hang the motor unit from a ceiling joist, ensuring it stays out of the way for the next steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vDc-m0cB_7o</video:player_loc>
      <video:duration>210</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11545-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dpyz32i5mQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Opener Track &amp; Mount Motor — Garage Door Opener Installation</video:title>
      <video:description>Position the new opener&apos;s track, ensuring the header end aligns with the existing bracket above the garage door opening. Secure the track to this header bracket using appropriate fasteners (e.g., bolts and nuts). Once the track is firmly attached to the header, carefully lift the motor unit with the attached track assembly. Align the motor unit with the existing ceiling mounting brackets and secure it in place, using the provided hardware or suitable replacements. The video shows reusing the existing ceiling brackets from the old opener, but always ensure they are robust enough for the new unit&apos;s weight and design.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dpyz32i5mQY</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11545-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tl_sDahKZbg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mount Main Opener Unit and Level — Garage Door Opener Installation</video:title>
      <video:description>Lift the main garage door opener unit and position it so that its mounting bolts align with the existing ceiling brackets. Secure the main unit by screwing the bolts tightly into the brackets. Once mounted, use a level to verify that the entire opener assembly (main unit and rail) is perfectly horizontal and level. This ensures proper operation and prevents strain on the system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tl_sDahKZbg</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11546-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wehde081FFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Garage Door Arm to Trolley — Garage Door Opener Installation</video:title>
      <video:description>Attach the garage door arm from the door itself to the trolley mechanism on the opener&apos;s rail. This arm connects the door to the opener, allowing it to move up and down. Ensure the arm is properly aligned and securely fastened to both the door bracket and the trolley according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wehde081FFk</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11546-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Door Bracket and Motor Unit Ceiling Mounts — Garage Door Opener Installation</video:title>
      <video:description>Install the emergency release cord and attach the door bracket to the top panel of the garage door. The door bracket connects the door to the opener&apos;s trolley. Mount the motor unit to the ceiling using the adjustable hanger brackets, ensuring the entire rail system is level and properly aligned with the garage door tracks. Secure these brackets into ceiling joists or a sturdy mounting board. Use a wrench or socket to tighten all bolts on the hanger brackets securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11546-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/T4_qJh_FhRc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Door Arms and Emergency Release — Garage Door Opener Installation</video:title>
      <video:description>Feed the emergency release rope through the opening in the trolley, ensuring the red handle is facing the correct direction for easy access. Next, you will install the door arms that connect the trolley to the garage door. There are typically two types: a straight arm and a curved arm. Attach the straight arm to the trolley using a clevis pin and ring fastener. Next, attach the curved arm to the support bracket located on the garage door itself. Ensure the garage door is completely down and flush with the floor when attaching this bracket. The straight arm may need to be cut to the appropriate length based on the specific dimensions of your garage door and opener setup. If trimming is necessary, mark the required length and use a hacksaw with a miter box or an oscillating multi-tool to make a clean cut. Finally, connect the straight arm and the curved arm together using two bolts, washers, and nuts, tightening them securely with a socket wrench. Re-engage the trolley by pushing the emergency release lever back into its operating position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/T4_qJh_FhRc</video:player_loc>
      <video:duration>92</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11547-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/45uh2iZRBJs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assemble Rail and Trolley — Garage Door Opener Installation</video:title>
      <video:description>Assemble the multi-piece rail system. Each rail piece has a slot and a tab. Connect them end-to-end by aligning the tab of one piece with the slot of the next. Ensure the tab is facing up. Use a rubber mallet to gently tap the pieces together, creating a single long rail. Next, insert the idler pulley into the designated slot at the front end of the assembled rail. Then, slide the inner and outer trolley assembly onto the rail from the motor end. Insert a screwdriver through the small hole in the rail to temporarily hold the trolley in place during further assembly, preventing it from sliding off the end.</video:description>
      <video:player_loc>https://www.youtube.com/embed/45uh2iZRBJs</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11547-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k8Fu9uoSOk4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Trolley Carriage onto Rail — Garage Door Opener Installation</video:title>
      <video:description>Before completely assembling the entire rail system, the trolley carriage must be installed onto the assembled rail sections. Slide the trolley carriage onto the rail from the end that will eventually connect to the garage door opener motor. It is crucial to position the trolley carriage correctly on the rail before attaching the last rail piece and the end pulley assembly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k8Fu9uoSOk4</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11547-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tl_sDahKZbg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Belt and Trolley — Garage Door Opener Installation</video:title>
      <video:description>After the rail sections are assembled, the trolley is installed by sliding it onto the rail. The belt is then threaded through the rail, around the pulley at the door end, and reconnected to the trolley. Use a wrench to tighten the pulley&apos;s bolt until the belt is taut but not overly tight, allowing the pulley to spin freely. Use a screwdriver inserted into the trolley&apos;s locking mechanism to temporarily hold it in place during the next steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tl_sDahKZbg</video:player_loc>
      <video:duration>326</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11548-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Door Bracket and Motor Unit Ceiling Mounts — Garage Door Opener Installation</video:title>
      <video:description>Install the emergency release cord and attach the door bracket to the top panel of the garage door. The door bracket connects the door to the opener&apos;s trolley. Mount the motor unit to the ceiling using the adjustable hanger brackets, ensuring the entire rail system is level and properly aligned with the garage door tracks. Secure these brackets into ceiling joists or a sturdy mounting board. Use a wrench or socket to tighten all bolts on the hanger brackets securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11548-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JxhE3bQfqus/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install C-Rail to Wall and Mount Opener to Ceiling — Garage Door Opener Installation</video:title>
      <video:description>Leave the opener unit, which is already connected to the C-rail, in its cardboard packaging box on the floor to protect it from damage. Lift the free end of the C-rail (the end attached to the opener unit) and, depending on the site&apos;s specific requirements, support the powerhead (opener) using a stepladder or similar stable support. This will allow the C-rail to be comfortably connected to the wall bracket. Attach the C-rail assembly to the previously installed wall bracket using the clevis and snap pins provided. Once the C-rail is secured to the wall, carefully raise the drive unit (opener) from its packaging box and support it in a horizontal position with the stepladder. Ensure the entire track (C-rail) is lined up perpendicularly to the wall. Finally, secure the opener&apos;s mounting brackets (perforated angle) into suitable fixings in the ceiling directly above the powerhead using screws and nuts. Make sure these fixings are into a structural member of the ceiling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JxhE3bQfqus</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11548-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MDAYY4W8LE0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mounting the Drive Rail Assembly — Garage Door Opener Installation</video:title>
      <video:description>The entire drive rail assembly, with the motor unit attached, is now ready to be mounted to the ceiling. Ensure the assembly is level using a spirit level. Position the header bracket on the wall above the garage door, ensuring it is within the appropriate distance from the door&apos;s highest arcing point (50mm or less, as specified in the manual). Mark the drilling points for the header bracket. Drill holes into the brickwork or wooden beam, insert the provided wall plugs, and secure the bracket with screws. Then, attach the drive rail to the header bracket. The presenter recommends using two additional angle irons from the kit to create a sturdy support structure on the ceiling joists or rafters, forming a rectangular frame. Attach these angle irons to the ceiling and then connect them to the drive rail, ensuring the entire assembly is parallel to the garage door and level both horizontally and vertically. Tighten all nuts and bolts securely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MDAYY4W8LE0</video:player_loc>
      <video:duration>133</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11549-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Wehde081FFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Garage Door Arm to Trolley — Garage Door Opener Installation</video:title>
      <video:description>Attach the garage door arm from the door itself to the trolley mechanism on the opener&apos;s rail. This arm connects the door to the opener, allowing it to move up and down. Ensure the arm is properly aligned and securely fastened to both the door bracket and the trolley according to the manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Wehde081FFk</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11549-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dpyz32i5mQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Lifting Arm to Garage Door — Garage Door Opener Installation</video:title>
      <video:description>Once the motor unit and track are mounted, connect the lifting arm. This arm extends from the trolley on the opener&apos;s track to a bracket on the top section of the garage door. Use the provided pins and bolts to securely attach the arm to both the trolley and the door bracket. Ensure all connections are tight and the arm has appropriate clearance for the door&apos;s full travel path.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dpyz32i5mQY</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11549-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/MDAYY4W8LE0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Installing the Towing Arm and Door Brackets — Garage Door Opener Installation</video:title>
      <video:description>The towing arm connects the garage door to the motor unit&apos;s trolley. The presenter uses the original towing arm from the old unit, but the new XTrac kit includes a two-piece towing arm and a towing bracket. The presenter recommends using the provided parts. Attach the towing bracket firmly to the top section of the garage door, centered horizontally. Next, assemble the two pieces of the towing arm using the provided nuts and bolts, ensuring a secure connection. Then, connect one end of the assembled towing arm to the towing bracket on the door. The other end of the towing arm connects to the trolley on the drive rail. For ease of installation, the arm should be nearly vertical when the door is closed, at roughly 80 degrees relative to the door&apos;s surface. Make sure the connections are secure but allow for smooth articulation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/MDAYY4W8LE0</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11550-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Safety Sensors — Garage Door Opener Installation</video:title>
      <video:description>Position the safety sensors, which typically consist of a sending unit and a receiving unit, near the bottom of the garage door tracks. Mark the desired height, usually 4 to 6 inches above the garage floor, for safety compliance. Drill pilot holes and securely fasten the sensor brackets to the garage door frame or tracks using the provided screws and a drill/driver. Insert the sensors into their brackets. Route the low-voltage wires from each sensor neatly along the wall and up to the motor unit. Strip about 1/4 inch of insulation from the ends of the wires and securely connect them to the appropriate terminals on each sensor using a screwdriver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11550-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dpyz32i5mQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Safety Electric Eye Sensors — Garage Door Opener Installation</video:title>
      <video:description>Mount the two electric eye sensors on either side of the garage door opening, approximately six inches (15 cm) from the ground. These sensors emit and receive an infrared beam. Use an impact driver to secure the mounting brackets, then attach the sensors. Route the low-voltage wiring from each sensor through a plastic conduit for protection, leading it up the wall and over to the opener unit. Connect the wires from both sensors to the designated terminals on the garage door opener. The sensors must be aligned so that the beam between them is unbroken; if the beam is interrupted, the door will not close or will reverse if already closing, providing crucial safety.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dpyz32i5mQY</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11550-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tl_sDahKZbg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install and Wire Safety Sensors — Garage Door Opener Installation</video:title>
      <video:description>Install the electric eyes (safety sensors) on both sides of the garage door track. These should be mounted approximately 5 inches from the ground. Each sensor has low-voltage wiring that needs to be routed up the garage door track, across the ceiling, and then down to the main opener unit. Connect the &apos;red&apos; and &apos;white&apos; wires from each sensor to their corresponding terminals on the main unit. Ensure red connects to red, and white connects to white/black. Test the unit to ensure it functions correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tl_sDahKZbg</video:player_loc>
      <video:duration>100</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11551-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire Motor Unit and Wall Control — Garage Door Opener Installation</video:title>
      <video:description>Connect the low-voltage wires from both safety sensors to the corresponding terminals on the main motor unit. Ensure that the solid white wire (or equivalent) from both sensors is twisted together and then inserted into one terminal, and the striped wire from both sensors is twisted together and inserted into the other terminal. Use a screwdriver to tighten the terminals, securing the wires. Neatly route all low-voltage wires along the ceiling and walls, securing them with wire clips and a hammer to prevent them from hanging loose or interfering with the door&apos;s operation. Finally, install the wall-mounted control button. Strip the ends of the wall control wires, connect them to the appropriate terminals on the back of the button unit, and then secure the unit to the wall using screws and a drill/driver.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11551-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ogJ3rOa1Xd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wire Safety Sensors and Wall Control — Garage Door Opener Installation</video:title>
      <video:description>Wire the safety sensors to the appropriate terminals on the garage door opener motor unit. The video shows stripping the ends of the sensor wires and connecting them in series to specific colored terminals (e.g., black to black, white to white). This completes the safety circuit. Additionally, wire the wall control panel (keypad) to its designated terminals on the opener, typically following a color-coded system (e.g., white and red wires).</video:description>
      <video:player_loc>https://www.youtube.com/embed/ogJ3rOa1Xd4</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11551-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S52wT1sX4Yw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect Low-Voltage Wiring — Garage Door Opener Installation</video:title>
      <video:description>Identify the low-voltage wires coming from the wall control unit and the safety sensors located near the bottom of the garage door tracks. These typically consist of two wires each, one with a colored stripe and one plain. The opener&apos;s terminal block will have clearly labeled connections. For the wall control, connect the striped wire to the designated terminal (often marked with a color) and the plain wire to the common terminal. For the safety sensors, connect the striped wires from each sensor to their respective terminals and the plain wires to the common terminal. Ensure all connections are secure. If in doubt about which wire goes where, consult the opener&apos;s manual or refer to a picture taken before dismantling the old unit. The presenter recommends taking a picture before disconnecting the old wires. They used a small flathead screwdriver to depress the orange tabs on the new terminal block to insert the wires.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S52wT1sX4Yw</video:player_loc>
      <video:duration>127</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11552-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2IYIo8ZDU_Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Battery Backup and Program Controls — Garage Door Opener Installation</video:title>
      <video:description>The new Genie opener includes a battery backup unit. Install this unit into its designated compartment on the opener&apos;s motor housing. It typically plugs into a specific port and is secured with a couple of screws. Next, program the remote controls and any outdoor keypad. For the remote, locate the program button on the motor unit (usually on the side or back). Press and hold this button until the indicator light turns blue, then release. Immediately press the desired button on the remote control twice. The opener&apos;s lights should blink or the motor should briefly activate to confirm programming. For the outdoor keypad, follow the specific instructions provided in the opener&apos;s manual for pairing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2IYIo8ZDU_Q</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11552-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0QKJkgTGCj4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program the New Keypad to the Opener — Garage Door Opener Installation</video:title>
      <video:description>The first step in making your keypad operational is to program it to your garage door opener. Begin by locating the &apos;programming&apos; or &apos;learn code&apos; button on your garage door opener. These buttons are typically found on the bottom of the opener unit, facing the floor (often under the light bulb cover), or on the rear of the unit, facing away from the garage door. The video illustrates different types of programming buttons: some are square, others are labeled &apos;learn code&apos;. Once you activate the learn mode on your opener, you will have a 30-second window to complete the next steps. For openers with a square programming button (Type 1 or Type 4), press and hold it until the round LED turns blue; then release it, and a long LED will begin to flash purple. For openers with a &apos;learn code&apos; button (Type 2 or Type 3), simply press and release it once, and the red LED will begin to flash. Once your opener is in learn mode, immediately return to the wireless keypad. The existing factory default PIN for this keypad is &apos;3-5-7&apos;. Enter &apos;3-5-7&apos; on the keypad, then press the &apos;UP/DOWN&apos; key slowly, three to four times, until your garage door begins to move. This indicates that the keypad has successfully learned the opener&apos;s code.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0QKJkgTGCj4</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11552-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FwsVMJUYThU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pair the Remote with the Opener — Garage Door Opener Installation</video:title>
      <video:description>After pressing the learn button on the opener, you will have approximately 30 seconds to complete the next step. Take your remote control and press the button you wish to program once. You should hear the garage door opener make a clicking sound, indicating it has registered the remote&apos;s signal. Then, press the same button on your remote control a second time. The garage door should then start to operate (move up or down), confirming that your remote has been successfully programmed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FwsVMJUYThU</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11553-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2IYIo8ZDU_Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Travel Limits and Test Operation — Garage Door Opener Installation</video:title>
      <video:description>After installation and programming, set the garage door&apos;s travel limits. This defines how far the door opens and closes. Locate the up, down, and set buttons on the motor unit. To set the down travel, press and hold the &apos;down&apos; arrow button until its indicator light blinks blue, then release. Allow the door to travel down, and once it reaches the desired closed position, press the &apos;set&apos; button. Repeat a similar process for the &apos;up&apos; travel limit. The presenter demonstrates how to move the trolley down the track using the motor buttons (press and hold the &apos;minus&apos; button until the blue light blinks, then release) to connect the garage door arm to the trolley. Perform several test cycles to ensure the door opens and closes smoothly, fully, and without obstruction. The presenter noted an issue with his door&apos;s original bracket placement which he corrected, leading to smoother operation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2IYIo8ZDU_Q</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11553-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ogJ3rOa1Xd4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Program Door Travel Limits — Garage Door Opener Installation</video:title>
      <video:description>Program the garage door opener&apos;s travel limits (how far up and down the door should go). This is typically done by pressing specific buttons on the opener unit itself. The opener will then perform a cycle, moving the door up and down, automatically setting or allowing manual adjustment of its open and close positions. The video shows the door operating very quietly during this process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ogJ3rOa1Xd4</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11553-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2C0AmmrVquo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adjust the travel limits — Garage Door Opener Installation</video:title>
      <video:description>After reinstalling the opener and restoring power, run the garage door opener through a complete travel cycle to check the upper and lower travel limits. Observe if the garage door closes completely and opens completely. If the garage door does not close completely, use a slot screwdriver to adjust the &apos;down travel&apos; setting on the motor unit (refer to your opener&apos;s manual for exact location and adjustment procedure), then cycle the door open and close to test the adjustment. Repeat this process until the door closes completely. Similarly, if the door doesn&apos;t open completely, adjust the &apos;up travel&apos; setting on the motor unit in the same manner, testing until it functions correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2C0AmmrVquo</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11554-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1tgdSgtZWEY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Light Bulbs, Test, and Adjust Opener — Garage Door Opener Installation</video:title>
      <video:description>Install the appropriate wattage light bulbs into the sockets on the motor unit and attach the light covers securely. Plug the garage door opener&apos;s power cord into a grounded electrical outlet. Once powered on, program the travel limits of the garage door (how far it opens and closes) and set the force limits (how much force the opener exerts). Use the wall control button and/or the remote control to test the opener&apos;s functionality. Finally, perform a safety reversal test by placing an object (like a 2x4 board) on the floor in the door&apos;s path. When the door closes and contacts the object, it should immediately reverse direction and open fully. This confirms the safety features are working correctly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1tgdSgtZWEY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11554-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qh1Ri-Ym13E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Safety Obstruction Tests — Garage Door Opener Installation</video:title>
      <video:description>It&apos;s crucial to perform safety obstruction tests to ensure the opener functions correctly and safely. For the close cycle test, first press the remote button to open the door. Place a piece of timber approximately 40mm high on the floor directly under the door&apos;s path. Then, close the door using the remote. The door should strike the timber and automatically reverse (re-open). For an additional close cycle test, open the door again and place the opener&apos;s carton (or a similar object) in the center of the doorway. Close the door; it should strike the carton and readily reverse. To test the open cycle, with the door in the closed position, press a remote button to start opening the door. When the door reaches approximately halfway, firmly grab the door&apos;s bottom rail with your hand (or place a suitable object that creates resistance). The door should stop its upward movement. If the door fails any of these tests (does not reverse when closing or stop when opening), the force may be excessive and needs adjusting. Immediately put the opener into manual mode via the manual release cord and operate the door by hand, then call for service.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qh1Ri-Ym13E</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11554-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dpyz32i5mQY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Testing &amp; Safety Check — Garage Door Opener Installation</video:title>
      <video:description>Test the new garage door opener&apos;s operation. Go to the exterior wireless keypad, enter the programmed code, and press the open/close button. Observe the door&apos;s movement, noting its quiet operation due to the belt drive. Next, perform a critical safety test: place a child&apos;s toy (like the scooter used earlier) in the path of the closing door. The door&apos;s safety sensors (electric eyes) should detect the obstruction, causing the door to immediately reverse and return to the fully open position, confirming the system&apos;s safety functionality. This verifies that the new opener adheres to modern safety standards, preventing accidents.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dpyz32i5mQY</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11544-1</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F28FwR7WWcw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Stubborn Adhesive Residue — Remove Old Stair Treads</video:title>
      <video:description>If you encounter areas where adhesive residue remains stubbornly stuck to the subfloor after peeling, there are several methods to remove it. One effective technique is to soak a clean towel in hot water and lay it directly over the adhesive. Allow it to sit for an extended period, preferably overnight, to thoroughly soften the glue. Once softened, use a putty knife or a wide drywall knife to scrape off the residue. For even tougher spots, a pry bar can be carefully slid underneath the adhesive to help lift it. Alternatively, a heat gun can be used to warm and soften the adhesive, making it easier to scrape away. Heat guns are available at hardware stores like Harbor Freight for around $10.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F28FwR7WWcw</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11544-2</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jKPw1-K4uoQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrape and Remove Adhesive Residue — Remove Old Stair Treads</video:title>
      <video:description>After successfully removing all the self-adhesive tiles, a thick and sticky residue will likely remain on the floor. Apply a generous amount of &apos;sticky stuff remover&apos; spray directly onto the adhesive residue. Allow the remover to penetrate and soften the adhesive for a few minutes as per product instructions. Use the scraper tool to carefully scrape away the softened, gooey residue. This step may require repeated applications of the remover and rigorous scraping, especially for particularly stubborn or thick adhesive layers. Ensure proper ventilation by opening windows or doors, as these types of removers often have strong fumes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jKPw1-K4uoQ</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11544-3</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/S6D-jN6Ssyw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Adhesive Residue Removal — Remove Old Stair Treads</video:title>
      <video:description>Wearing protective gloves, spray &apos;Goof Off Adhesive Gunk Remover Gel&apos; generously onto areas with sticky residue from the removed stickers. Allow the product to sit for a few minutes as directed on the label. Use a putty knife to gently scrape off the softened adhesive, being careful not to damage the wood surface. Wipe away any remaining residue with a clean rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/S6D-jN6Ssyw</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11543-1</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Enb5bQ_uYac/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Polyurethane Application — Remove Old Stair Treads</video:title>
      <video:description>Once all sanding is complete, use a shop vacuum to remove all remaining dust. Follow up with a tack cloth to wipe down the entire surface of the treads, ensuring every last particle of dust is removed. This step is critical for a smooth, blemish-free finish. At this stage, before applying polyurethane to the treads, it&apos;s an opportune time to paint the stair risers or the scotia molding (if applicable). This allows for easier cutting in and avoids getting paint on your freshly finished treads. If you prefer a different look, you could also swap out painted scotia for oak molding to match the treads. Ensure any paint is fully dry before proceeding to the next step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Enb5bQ_uYac</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11543-2</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8XtpfbED0bQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Cleaning and Dust Removal — Remove Old Stair Treads</video:title>
      <video:description>After all sanding is complete, the final step before applying any new finish is to meticulously remove all sanding dust from the stairs and the surrounding work area. This is crucial because any remaining dust can get trapped in the new finish, resulting in a bumpy or cloudy appearance. Use a shop vacuum with a brush attachment to thoroughly vacuum all surfaces of the stairs, paying extra attention to corners, crevices, and underneath the treads. After vacuuming, use a tack cloth (a sticky cloth designed to pick up fine dust) to wipe down every part of the stairs. For optimal results, wipe with a lint-free rag lightly dampened with mineral spirits or denatured alcohol to capture any remaining superfine dust particles. Ensure the wood is completely dry and dust-free before proceeding with staining, sealing, or painting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8XtpfbED0bQ</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11543-3</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrLRY9adkN8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cleaning and Edge Preparation — Remove Old Stair Treads</video:title>
      <video:description>Once sanding is complete, meticulously clean the stairs. First, use a paint scraper to remove any remnants of old paint, caulk, or debris from the edges where the treads meet the risers and walls. This ensures a clean line for painting. Next, use a shop vacuum with a brush attachment to thoroughly vacuum all stair surfaces, including crevices, to remove sanding dust. Finally, wipe down each tread and riser with a clean, damp cloth to pick up any lingering fine dust particles. Allow the wood to dry completely before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrLRY9adkN8</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11542-1</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/diTxF53fdrA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Physically Remove Old Stair Treads — Remove Old Stair Treads</video:title>
      <video:description>For the initial removal of the old stair treads, which were extensively glued and nailed, the video suggests using robust tools. Insert a crowbar underneath the edge of an old tread, and then use a sledgehammer to drive the crowbar deeper, creating leverage. Pry the tread upwards forcefully. It&apos;s important to note that the treads, often made of composite wood, are likely to break into multiple pieces during this process due to the strong adhesive. The video shows broken pieces with nails still attached, indicating the force needed and the integrity of the original installation. After the main pieces are detached, extract any exposed, large nails from the underlying wooden structure using the claw of a hammer or the crowbar.</video:description>
      <video:player_loc>https://www.youtube.com/embed/diTxF53fdrA</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11542-2</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q-oTCiG5WCU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Carpet — Remove Old Stair Treads</video:title>
      <video:description>Starting from the top, use a utility knife to carefully cut the carpet, especially under the nose of the landing (the overhang of the tread). Once an edge is created, use the vise-grip pliers to grab the carpet firmly and pull it free from the riser. Work your way down the stairs, gripping the carpet with both hands for balance and safety, and pulling from side to side. Cut the carpet into manageable sections as you go, and once a section is removed, roll it up, secure it with duct tape, and remove it from the worksite to keep the area clear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q-oTCiG5WCU</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11542-3</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fTh9RuhZAtY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Stair Carpet — Remove Old Stair Treads</video:title>
      <video:description>Begin by removing the old carpet from the stairs. Use a utility knife to cut the carpet, and pliers to pull out any staples. A trim puller tool (like one used for baseboards) can be effective for getting under and lifting the tack strips. Exercise extreme caution, as tack strips contain sharp nails and staples that can cause injury. Ensure a garbage can is readily available to immediately dispose of removed tack strips and staples to prevent accidents. Once the carpet and tack strips are removed from a section, use a shop-vac to clean up any debris, staples, or dirt.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fTh9RuhZAtY</video:player_loc>
      <video:duration>163</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11541-1</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JRTp1P9byGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Heat and Scrape — Remove Old Stair Treads</video:title>
      <video:description>Once an edge is lifted, turn on your heat gun and apply heat directly to the linoleum and underlying adhesive, just ahead of where you are scraping. Hold the heat gun with one hand and continuously scrape with the putty knife in the other, moving forward as the adhesive softens. You don&apos;t need to overheat the area; a high setting on the heat gun will quickly loosen the adhesive, allowing the linoleum to peel away relatively easily. Maintain a steady pace, heating and scraping to remove the entire section.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JRTp1P9byGk</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11541-2</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F28FwR7WWcw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Stubborn Adhesive Residue — Remove Old Stair Treads</video:title>
      <video:description>If you encounter areas where adhesive residue remains stubbornly stuck to the subfloor after peeling, there are several methods to remove it. One effective technique is to soak a clean towel in hot water and lay it directly over the adhesive. Allow it to sit for an extended period, preferably overnight, to thoroughly soften the glue. Once softened, use a putty knife or a wide drywall knife to scrape off the residue. For even tougher spots, a pry bar can be carefully slid underneath the adhesive to help lift it. Alternatively, a heat gun can be used to warm and soften the adhesive, making it easier to scrape away. Heat guns are available at hardware stores like Harbor Freight for around $10.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F28FwR7WWcw</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11541-3</loc>
    <lastmod>2026-10-29T17:33:40.147Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/evUGqldWNVU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Heat and Scrape Tile — Remove Old Stair Treads</video:title>
      <video:description>Begin the removal process by directing the heat source (either a heat gun or hair dryer) at the edge or corner of a loose vinyl tile. Apply heat for approximately 10-20 seconds to allow the adhesive to warm up and become pliable. As the adhesive softens, carefully insert the edge of a hand scraper or flathead screwdriver underneath the heated tile. Apply gentle upward pressure to lift the tile, working the tool along the adhesive line as you continue to apply heat. The goal is to lift the tile in one piece if possible, minimizing adhesive residue on the subfloor. Repeat this process for each tile that needs to be removed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/evUGqldWNVU</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-10-29T17:33:40.147Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11534-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zcBE1kQz8z0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Driveway — Driveway Sealcoating</video:title>
      <video:description>Begin by thoroughly cleaning the asphalt driveway. This can be done by sweeping off loose debris, using a blower to clear the area, scrubbing the surface with soap and a broom, or using a pressure washer. The goal is to remove all grease, oil, dirt, and any other debris to ensure the new seal coating adheres properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zcBE1kQz8z0</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11534-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vKuDYpgYP3k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Driveway Surface — Driveway Sealcoating</video:title>
      <video:description>Begin by thoroughly cleaning the asphalt driveway. Use a push broom to sweep away any loose debris such as grass clippings, dirt, and dust. Along the edges of the driveway, use an edging tool to cut back any overgrown grass, creating a neat and clear boundary. Next, rinse the entire driveway using a pressure washer to remove deeply embedded dirt and grime. For any remaining stubborn stains, scrub them vigorously with a stiff wire brush and an asphalt cleaner. This step is critical to prevent stains from bleeding through the new sealant coat and to ensure optimal adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vKuDYpgYP3k</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11534-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fvQrKkktHvA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Driveway — Driveway Sealcoating</video:title>
      <video:description>Before applying any sealant, it is crucial to thoroughly prepare the driveway. This involves removing all dirt, dust, leaves, and loose debris using a broom, leaf blower, or power washer. Any oil or grease stains should be treated with an appropriate degreaser and scrubbed clean. Inspect the driveway for cracks or potholes and repair them using asphalt crack filler or patch products, allowing them to cure as per product instructions. Finally, protect adjacent surfaces like concrete sidewalks, garage doors, or garden beds with masking tape and plastic sheeting to prevent accidental overspray. Although the video primarily focuses on the application, proper preparation is key to a long-lasting and professional-looking sealcoat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fvQrKkktHvA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11535-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YHJ2x4jCSyU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill Cracks — Driveway Sealcoating</video:title>
      <video:description>Once the cracks are clean and dry, apply a good quality asphalt crack filler. Carefully squeeze the filler directly into every crack you find, ensuring it penetrates deeply. You may need to apply a couple of coats to fully fill the cracks and make them level with the surrounding asphalt surface. Allow adequate drying time between coats according to the product manufacturer&apos;s instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YHJ2x4jCSyU</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11535-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vKuDYpgYP3k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair Cracks and Potholes — Driveway Sealcoating</video:title>
      <video:description>Next, address any existing cracks or potholes in the driveway. For cracks that are less than half an inch wide, first clear out any weeds or debris using a small tool like a screwdriver, then sweep clean with a small brush. Apply asphalt driveway crack filler directly into the crack, filling it to be level with the surrounding driveway surface. Allow the crack filler to cure overnight, or as specified by the manufacturer&apos;s instructions. For larger cracks and potholes, use pothole filler. Fill the deeper areas with the pothole filler, pack it down firmly, and then refill to bring it level with the driveway. This packing helps minimize shrinkage. Deeper repairs may require a longer curing period, often up to two weeks, so always consult the manufacturer&apos;s guidelines for complete curing before proceeding to the sealing step.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vKuDYpgYP3k</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11535-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2Zj2KVAcSt4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Patch and Repair Cracks and Potholes — Driveway Sealcoating</video:title>
      <video:description>For cracks up to 0.5 inches wide, apply a specialty crack filler product directly into the crack. Use a putty knife to smooth the crack filler even with the driveway surface. For larger cracks and potholes, fill them with a ready-to-use patch product. After filling, use a tamper to compress and even out the patch with the surrounding driveway surface. It is crucial to check the specific cure time for the patch product used, as some may require up to 30 days to fully cure before sealing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2Zj2KVAcSt4</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11536-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Pw8pmqNbTpI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Cleaning and Sealer Mixing — Driveway Sealcoating</video:title>
      <video:description>On the day of sealing, begin by blowing off any new debris or leaves that may have settled on the driveway overnight. Next, thoroughly mix the driveway sealer in each bucket according to the manufacturer&apos;s instructions. The presenter&apos;s sealer required mixing for about five minutes. A drill-mounted mixer is highly recommended for efficient and even mixing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Pw8pmqNbTpI</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11536-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7XXxf3gq46Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Asphalt Sealer — Driveway Sealcoating</video:title>
      <video:description>Once the driveway is clean and dry, prepare the asphalt sealer. The video shows a &apos;Latex-ite Driveway Filler Sealer UltraShield&apos; product in a 5-gallon bucket. Use a heavy-duty power drill with a paint or mortar mixing paddle attachment to mix the sealer. This ensures that any settled solids are fully incorporated, creating a smooth, even consistency necessary for proper application and optimal performance. Mix according to the manufacturer&apos;s instructions, typically for several minutes, until no lumps or separated layers are visible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7XXxf3gq46Q</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11536-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/61WY9jNH4yU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mix the Asphalt Sealant — Driveway Sealcoating</video:title>
      <video:description>Before applying the sealant, it must be thoroughly mixed to ensure a uniform consistency. Place a paint mixer attachment into a cordless drill and insert it into a bucket of sealant. Mix the sealant for several minutes until it is smooth and free of lumps, ensuring all solids are fully incorporated. Repeat this process for all sealant buckets.</video:description>
      <video:player_loc>https://www.youtube.com/embed/61WY9jNH4yU</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11537-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zcBE1kQz8z0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Apply Sealer — Driveway Sealcoating</video:title>
      <video:description>Before applying, ensure the sealer is properly stirred. This can be done efficiently with a drill and a mixer attachment. Once thoroughly mixed, pour a small amount of the sealer onto a small section of the driveway. Using a squeegee or a brush broom, spread the sealer evenly across the surface. The technique is similar to painting, ensuring the sealer fills small gaps, pores, and fissures in the asphalt. Work systematically from one end of the driveway to the other, moving away from areas you&apos;ve already sealed. This allows you to avoid walking on the fresh application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zcBE1kQz8z0</video:player_loc>
      <video:duration>66</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11537-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YlD_4eC3cgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Sealer: Pour and Initial Spread — Driveway Sealcoating</video:title>
      <video:description>Begin applying the driveway sealer starting from the highest point of your driveway and working your way downwards. Pour a 6 to 8-inch wide band of sealer across the driveway. For most products, you can then use a squeegee to spread this band evenly across the surface. The goal is to achieve a very thin, uniform coat for the best results.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YlD_4eC3cgQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11537-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/O2CLPB9WxRQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Sealer: Method 1 (All at Once) — Driveway Sealcoating</video:title>
      <video:description>There are two main methods for applying the asphalt sealer. Method 1 involves applying the sealer to the entire driveway at once. This includes pouring sealer from a bucket onto the surface, then using a rubber squeegee to spread it out. You&apos;ll work the squeegee back and forth, ensuring the sealer gets into all cracks and depressions, covering the entire surface, and then making a final smooth pass to even it out. This method is faster but can be less precise, potentially leading to wasted sealer along the edges and uneven filling in deeper areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/O2CLPB9WxRQ</video:player_loc>
      <video:duration>204</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11538-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/37pQ6MoD3nI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry the First Coat — Driveway Sealcoating</video:title>
      <video:description>Allow the first coat of sealer to dry completely. Water-based sealers typically dry within a couple of hours, especially in warm weather. However, drying time can be extended in humid or cold conditions. You can check for dryness by observing if the milky white color has turned clear and by touching the surface to ensure it is no longer sticky.</video:description>
      <video:player_loc>https://www.youtube.com/embed/37pQ6MoD3nI</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11538-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xuMEasleIXM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow to Dry and Cure — Driveway Sealcoating</video:title>
      <video:description>Once the entire concrete driveway has been sealed, it is crucial to allow adequate drying and curing time. Refer to the manufacturer&apos;s instructions on the sealant product for specific drying times, which can vary based on temperature, humidity, and product type. Typically, sealed concrete may be dry to the touch within a few hours but should be kept free from foot traffic for 24 hours and vehicle traffic for 48-72 hours. Proper curing ensures the sealer fully penetrates and bonds with the concrete, providing long-lasting protection against water, oil, and freeze-thaw cycles, and establishing its enhanced aesthetic.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xuMEasleIXM</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11539-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/37pQ6MoD3nI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply the Second Coat of Sealer — Driveway Sealcoating</video:title>
      <video:description>Once the first coat is completely dry, clear, and non-sticky, you can apply the second coat. If possible, apply the first coat in one direction (e.g., North-South) and the second coat in the opposite direction (e.g., East-West) to ensure maximum coverage and evenness. When applying, avoid creating straight lines; instead, roll in slight diagonal or curved motions to blend the overlaps and avoid leaving visible lines. If changing directions isn&apos;t feasible due to entry/exit points, at least try to ensure that the overlap marks from the second coat are different from those of the first coat to achieve a good, even finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/37pQ6MoD3nI</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11539-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e2a1xmK5Qvc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Coat of Sealer — Driveway Sealcoating</video:title>
      <video:description>After applying the first coat, allow your driveway to seal and dry for 24 hours. Once the first coat has cured for the recommended time, repeat the entire application process for a second coat. This involves pouring a ribbon of sealer across the width of the driveway, spreading it with the brush side at a 45-degree angle, and then smoothing it with the squeegee side. Continue working from the garage side down to the end of the driveway, just as you did for the first coat. This second coat ensures maximum protection and a deeper, more uniform black finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e2a1xmK5Qvc</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11539-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GcoJtjwEv-M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Coat and Appearance Assessment — Driveway Sealcoating</video:title>
      <video:description>Allow the first coat to dry completely, typically for several hours or overnight, as per product instructions. Once dry, apply a second coat of the colored sealer following the same application method (edging with a brush, main area with a squeegee). The second coat will provide a more uniform, rich color and fill in any remaining minor imperfections. Observe the finished driveway, noting the color&apos;s resemblance to concrete and the cooler surface temperature it provides compared to black asphalt. The final result should be a consistently colored and refreshed driveway.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GcoJtjwEv-M</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11540-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YlD_4eC3cgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Sealer to Cure — Driveway Sealcoating</video:title>
      <video:description>Once the driveway is sealed, it needs adequate time to cure. Avoid driving or parking cars on the driveway for at least 24 to 48 hours, or as specified by the sealer manufacturer. Before starting the project, check the weather forecast to ensure there will be no rain for at least 24 to 48 hours after you finish, as rain can wash away or compromise the newly applied sealer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YlD_4eC3cgQ</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11540-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8kIsolwJk78/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry and Cure Sealcoat — Driveway Sealcoating</video:title>
      <video:description>Once the entire driveway has been sealcoated, it is essential to allow adequate time for the material to dry and cure. This typically requires 24 to 48 hours, but always refer to the specific product manufacturer&apos;s instructions, as drying times can vary based on temperature, humidity, and product type. Avoid walking, driving, or placing heavy objects on the newly sealed surface during this period to prevent damage or tracking. For best results, it is recommended to apply two thin coats, allowing the first coat to dry before applying the second.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8kIsolwJk78</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11540-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6NBPJpQoics/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Curing — Driveway Sealcoating</video:title>
      <video:description>After all sealant has been applied and initial cleanup is complete, conduct a thorough final inspection of the entire sealed driveway. Look for any small missed spots, areas with uneven coverage, or any minor imperfections that might need a quick touch-up with a small amount of sealant. Once satisfied with the finish, the driveway must be left undisturbed to cure for the recommended period, typically 24 to 48 hours. This curing time allows the sealant to harden and properly bond with the asphalt, ensuring maximum durability and longevity. During this period, it is absolutely crucial to prevent any foot traffic, vehicle traffic, or heavy objects from coming into contact with the freshly sealed surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6NBPJpQoics</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11531-1</loc>
    <lastmod>2026-10-29T00:19:52.951Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WWPLBZXx9Po/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Landing Dimension Requirements — Landings</video:title>
      <video:description>This step explains the typical dimension requirements for a residential stair landing. The width and depth of the landing should generally match the width of the stairway. The speaker mentions that the minimum width for a residential stairway is often 36 inches, which means the landing should also be a minimum of 36 inches by 36 inches. He notes that if a stairway is wider, for example, 40 inches, the landing depth should also be 40 inches, although he mentions this rule is not always strictly enforced by inspectors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WWPLBZXx9Po</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-29T00:19:52.951Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11531-2</loc>
    <lastmod>2026-10-29T00:19:52.951Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lBtiS904I4A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Implement Landings — Landings</video:title>
      <video:description>For outdoor stairs, landings are explicitly required at both the top and bottom. These landings must be at least the same width as the stairs and a minimum of 36 inches deep in the direction of travel. For indoor stairs, landings are not strictly required unless a door swings out over the stair area. If a door is present, it must swing inward, away from the stairs, to eliminate the need for a landing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lBtiS904I4A</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-10-29T00:19:52.951Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11531-3</loc>
    <lastmod>2026-10-29T00:19:52.951Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7JVqRk4dXPk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Landing Area — Landings</video:title>
      <video:description>Start by identifying the precise center point of the exterior doorway. Using a tape measure and a pencil, mark this center point on the house framing or wall. From this center, measure and mark the full width of the intended landing (5 feet in this case) and its depth (3 feet). These marks will serve as guides for the perimeter of the landing&apos;s structural frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7JVqRk4dXPk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-29T00:19:52.951Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11532-1</loc>
    <lastmod>2026-10-29T00:19:52.951Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Landings</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-29T00:19:52.951Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11532-2</loc>
    <lastmod>2026-10-29T00:19:52.951Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Landings</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-29T00:19:52.951Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11532-3</loc>
    <lastmod>2026-10-29T00:19:52.951Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Landings</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-29T00:19:52.951Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11533-1</loc>
    <lastmod>2026-10-29T00:19:52.951Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — Landings</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-10-29T00:19:52.951Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11533-2</loc>
    <lastmod>2026-10-29T00:19:52.951Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/msA5WIK-EPs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Align Carpet Landing with Treads — Landings</video:title>
      <video:description>Begin by roughly placing the carpet landing piece in its designated area. The critical first step is to carefully line up the front edge of the carpet landing with the previously installed carpet stair treads. The landing carpet comes with a pre-molded bullnose edge; ensure this edge is correctly wrapped over the front of the landing, creating a tight and seamless transition with the stairs below.</video:description>
      <video:player_loc>https://www.youtube.com/embed/msA5WIK-EPs</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-29T00:19:52.951Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11533-3</loc>
    <lastmod>2026-10-29T00:19:52.951Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/t2gBL7-bXp8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Design Hardwood Border for Carpeted Landing — Landings</video:title>
      <video:description>To maintain the cohesive aesthetic established on the stairs, the landing is also treated with a carpet inlay, but instead of running the carpet directly to the walls, a hardwood border is installed all the way around the perimeter of the landing. This border matches the wood used in the stair treads and stringers, extending the sophisticated &apos;carpet inlay&apos; look to the entire landing area. This design avoids the typical practice of having carpet go right up under the baseboard, which would break the visual continuity and the intentional design of the open riser staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/t2gBL7-bXp8</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-10-29T00:19:52.951Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11525-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/foJlAlEdJi8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off and Drain the Water Line — Refrigerator Water Filter Replacement</video:title>
      <video:description>Locate the water supply shutoff valve for your refrigerator&apos;s water line. This may be behind the fridge or in the basement, as shown in the video. Turn the valve to the &apos;off&apos; position. Place a bucket underneath the connection point. Use pliers to carefully loosen the compression nut where the line connects to the valve to allow any trapped water in the line to drain out. Once drained, retighten the nut.</video:description>
      <video:player_loc>https://www.youtube.com/embed/foJlAlEdJi8</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11525-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0KwiBFqYB3o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — Refrigerator Water Filter Replacement</video:title>
      <video:description>Locate the water shutoff valve for your refrigerator&apos;s water line, which is typically on the wall behind the appliance. Turn the handle or knob to shut off the water supply completely. For most modern valves, this requires only a quarter-turn.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0KwiBFqYB3o</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11525-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0KwiBFqYB3o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Shut Off Water Supply — Refrigerator Water Filter Replacement</video:title>
      <video:description>Locate the water shutoff valve for your refrigerator&apos;s water line, which is typically on the wall behind the appliance. Turn the handle or knob to shut off the water supply completely. For most modern valves, this requires only a quarter-turn.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0KwiBFqYB3o</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11526-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DhJWJlK1rDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Water Filter — Refrigerator Water Filter Replacement</video:title>
      <video:description>Locate the water filter, which is typically found behind a grille at the bottom of the fresh food compartment. Grasp the knob or handle on the end of the filter. Turn it counter-clockwise approximately a quarter turn until it unlocks. Once unlocked, pull the filter straight out from its housing. Expect a small amount of water to dribble out as the filter is removed, so it&apos;s advisable to have a towel or cloth ready.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DhJWJlK1rDg</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11526-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oHBagS608og/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Water Filter — Refrigerator Water Filter Replacement</video:title>
      <video:description>With the container in place, press the release button on the water filter cover. This will typically allow the cover to open or hinge downwards. Once the cover is open, firmly pull the old water filter downwards until it reaches a stop, indicating it&apos;s disengaged from the water line. In some refrigerator models, you may also need to rotate the filter counter-clockwise or to the left to fully disengage it before pulling it out. Carefully pull the filter entirely out of the housing and immediately place it into the prepared container to avoid any further spills.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oHBagS608og</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11526-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-AbFgC6oDIs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove the Old Water Filter — Refrigerator Water Filter Replacement</video:title>
      <video:description>Open the refrigerator door to access the water filter compartment. Before removing the old filter, place a towel directly under the filter housing to catch any residual water that may drip out. Locate the filter cover, open it, then twist the old water filter counter-clockwise and pull it straight out from its housing. Some water may spill during this process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-AbFgC6oDIs</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11527-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3OOijLUgAeM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Water Filter — Refrigerator Water Filter Replacement</video:title>
      <video:description>Take the new water filter. Align the new filter with the opening in the filter housing. While pushing the filter in, turn it clockwise approximately a quarter of a turn until it locks securely into position. You should feel it click or stop firmly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3OOijLUgAeM</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11527-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TbT-qjB0FqY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Filter — Refrigerator Water Filter Replacement</video:title>
      <video:description>Take the new water filter. Align it with the spout in the filter housing and push it in. While pushing inward, turn the filter clockwise until it locks securely into position. You should feel a click or a positive stop when it&apos;s properly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TbT-qjB0FqY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11527-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TbT-qjB0FqY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the New Filter — Refrigerator Water Filter Replacement</video:title>
      <video:description>Take the new water filter. Align it with the spout in the filter housing and push it in. While pushing inward, turn the filter clockwise until it locks securely into position. You should feel a click or a positive stop when it&apos;s properly seated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TbT-qjB0FqY</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11528-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/15pvvW_gSaY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Check for Leaks — Refrigerator Water Filter Replacement</video:title>
      <video:description>Slowly turn the cold water valve back on by turning it counter-clockwise. Listen for the water filling the filter; you may hear gurgling as air is purged. Once the water is on, carefully inspect all three connection points for any signs of leaks or drips. If you see any water, turn the supply off and tighten the leaking connection slightly before turning the water back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/15pvvW_gSaY</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11528-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/15pvvW_gSaY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn On Water and Check for Leaks — Refrigerator Water Filter Replacement</video:title>
      <video:description>Slowly turn the cold water valve back on by turning it counter-clockwise. Listen for the water filling the filter; you may hear gurgling as air is purged. Once the water is on, carefully inspect all three connection points for any signs of leaks or drips. If you see any water, turn the supply off and tighten the leaking connection slightly before turning the water back on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/15pvvW_gSaY</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11528-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0KwiBFqYB3o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Water and Check for Leaks — Refrigerator Water Filter Replacement</video:title>
      <video:description>Slowly turn the water supply valve back on. Carefully inspect the connections at the valve, the filter inlet, and the filter outlet for any signs of dripping or leaking. If you see any leaks, immediately turn the water off, check that the connections are properly threaded, and tighten them further.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0KwiBFqYB3o</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11529-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-AbFgC6oDIs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush the Water System — Refrigerator Water Filter Replacement</video:title>
      <video:description>To flush the water system and remove any trapped air or loose carbon particles from the new filter, place a sturdy container (such as a large tumbler or pitcher) under the water dispenser. Press and hold the water dispenser paddle for five seconds to dispense water, then release it for five seconds. Repeat this process until a total of three gallons of water has been dispensed. Initially, water may spurt or appear cloudy as air is purged from the system. Continue until the water flows steadily and clearly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-AbFgC6oDIs</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11529-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VXuYxtk-e5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush the System — Refrigerator Water Filter Replacement</video:title>
      <video:description>After installing the new filter, it is crucial to flush the water system. Place a large container (e.g., a gallon pitcher) under the refrigerator&apos;s water dispenser. Dispense several gallons of water through the dispenser, typically 2-3 gallons, or until the water runs clear and any air bubbles or sputtering stops. This process removes air from the water lines and flushes out loose carbon particles (which may appear as black specks or cloudy water) from the new filter, ensuring clean and clear water for consumption.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VXuYxtk-e5s</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11529-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ty-Sc_okdy4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Flush the System — Refrigerator Water Filter Replacement</video:title>
      <video:description>After installing the new filter, you must flush the system to remove air from the water lines and any loose carbon particles from the new filter. The video shows filling a large pot with water from the dispenser. Continue dispensing several gallons of water (typically 2-3 gallons or 5 minutes of continuous dispensing, as recommended by manufacturers) until the water runs clear and smooth, without any sputtering or cloudiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ty-Sc_okdy4</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11530-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-AbFgC6oDIs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reset Filter Indicator Light — Refrigerator Water Filter Replacement</video:title>
      <video:description>Once the new filter is installed, locate the &apos;Filter Reset&apos; button on your refrigerator&apos;s water and ice dispenser panel. Press and hold this button for approximately three seconds. The &apos;REPLACE FILTER&apos; indicator light on the panel should turn off, signifying that the filter status has been reset.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-AbFgC6oDIs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11530-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/5wVfHWkjNhw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reset Filter Indicator Light — Refrigerator Water Filter Replacement</video:title>
      <video:description>Locate the control panel on the front of your refrigerator. Find the &apos;Water Filter&apos; button or indicator. Press and hold this button for the manufacturer-specified duration (often 3-5 seconds) until the indicator light resets or turns off. If you are unsure about the specific procedure for your model, refer to your refrigerator&apos;s manufacturer&apos;s instruction manual.</video:description>
      <video:player_loc>https://www.youtube.com/embed/5wVfHWkjNhw</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11530-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d70jFoiKrZU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reset the Filter Indicator — Refrigerator Water Filter Replacement</video:title>
      <video:description>After installing the new filter, you need to reset the filter indicator light on the refrigerator&apos;s dispenser panel. Locate the &apos;Water Filter&apos; button and press and hold it down for about three seconds. The red light will turn off, indicating the timer has been reset.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d70jFoiKrZU</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11518-1</loc>
    <lastmod>2026-10-27T20:56:18.379Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Stair Tread Measurement</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-27T20:56:18.379Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11518-2</loc>
    <lastmod>2026-10-27T20:56:18.379Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Tread Measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-27T20:56:18.379Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11518-3</loc>
    <lastmod>2026-10-27T20:56:18.379Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-27T20:56:18.379Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11517-1</loc>
    <lastmod>2026-10-27T20:56:18.379Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Stair Tread Measurement</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-27T20:56:18.379Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11517-2</loc>
    <lastmod>2026-10-27T20:56:18.379Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Stair Tread Measurement</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-27T20:56:18.379Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11517-3</loc>
    <lastmod>2026-10-27T20:56:18.379Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-27T20:56:18.379Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11516-1</loc>
    <lastmod>2026-10-27T20:56:18.379Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Tread Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-27T20:56:18.379Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11516-2</loc>
    <lastmod>2026-10-27T20:56:18.379Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Stair Tread Measurement</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-27T20:56:18.379Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11516-3</loc>
    <lastmod>2026-10-27T20:56:18.379Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hU7get7lSaA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Riser Height and Tread Depth Consistency — Stair Tread Measurement</video:title>
      <video:description>To perform a precise measurement, take a framing square and position it firmly against the riser and tread of a step. Place the short arm of the square on the tread and the long arm vertically against the riser above it. Note the measurement at the top of the riser. Then, position the long arm of the square along the tread, extending towards the front edge (nosing) of the step, and the short arm vertically against the riser of the step below. Note the measurement for the tread depth. Repeat this process for every step on the staircase. The purpose is to compare the measurements for each riser and tread, ensuring they are consistent throughout the staircase. The video demonstrates this technique on a theoretically perfect staircase to show expected uniformity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hU7get7lSaA</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-27T20:56:18.379Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11515-1</loc>
    <lastmod>2026-10-27T17:51:45.556Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — measure stairs for carpet stair treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-27T17:51:45.556Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11515-2</loc>
    <lastmod>2026-10-27T17:51:45.556Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — measure stairs for carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-27T17:51:45.556Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11515-3</loc>
    <lastmod>2026-10-27T17:51:45.556Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — measure stairs for carpet stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-27T17:51:45.556Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11514-1</loc>
    <lastmod>2026-10-27T17:51:45.556Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — measure stairs for carpet stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-27T17:51:45.556Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11514-2</loc>
    <lastmod>2026-10-27T17:51:45.556Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — measure stairs for carpet stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-27T17:51:45.556Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11514-3</loc>
    <lastmod>2026-10-27T17:51:45.556Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — measure stairs for carpet stair treads</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-27T17:51:45.556Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11509-1</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aPgMwBl6a2Y/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Approve and Submit Order — Custom Landing Pad Order</video:title>
      <video:description>Once you have successfully applied the customer&apos;s personalized text and verified its appearance on the product design, click the &apos;Approve personalization&apos; button. This confirms that the design is ready. After approval, the order status will update, and you can then click &apos;Submit&apos; to send the fully customized product directly to the Printify production facility for printing and fulfillment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aPgMwBl6a2Y</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11509-2</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LzjK95dU8x0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Automated Order and Approval — Custom Landing Pad Order</video:title>
      <video:description>To confirm the automation is working, place a test order for the personalized product on Etsy. Input the desired custom text (e.g., &apos;2020&apos; instead of &apos;2023&apos;). After the order is placed, check the &apos;Approval Queue&apos; within HelloCustom.io. The order should appear with the customized design (e.g., &apos;CAMP BACH 2020&apos;). The AI automatically updates the design based on the buyer&apos;s input. Review the personalized design in HelloCustom.io. If everything looks correct, click the &apos;Approve&apos; button. This action sends the finalized, personalized design to Printify for fulfillment. Note that Printify may take 1-2 hours to pick up the order after approval in HelloCustom.io.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LzjK95dU8x0</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11509-3</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NCQELR1vzUg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Automate Order Fulfillment — Custom Landing Pad Order</video:title>
      <video:description>Once your Etsy listing is active and integrated with HelloCustom.io, whenever a customer places a personalized candle order on Etsy, it will automatically appear in the &apos;Approval Queue&apos; within your HelloCustom.io dashboard. Regularly check this queue. Review each order to ensure the personalized text is correct and adheres to any guidelines. Once you confirm the details, simply click &apos;Approve&apos;. This action sends the personalized design directly to Printify for printing and fulfillment. Since Printify is also integrated, it will process the order, print the custom label, and ship the candle directly to the customer, completely automating the order fulfillment process and eliminating the need for manual file editing or shipping for each personalized order.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NCQELR1vzUg</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11510-1</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oa6UKyN98IY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Review Final Rug — Custom Landing Pad Order</video:title>
      <video:description>Once all stitching is complete, give the finished rug a final inspection to ensure all seams are secure and ribbons are firmly attached. The final dimensions of the rug should be approximately 69cm (27 1/8 inches) in length and 37.5cm (14 3/4 inches) in width. This concludes the creation of the patchwork fabric rug.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oa6UKyN98IY</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11510-2</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xsm0Mg14n-A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Sew Canvas Hem — Custom Landing Pad Order</video:title>
      <video:description>Once the canvas has been pre-shrunk and is dry, it is measured to the specific dimensions required for the custom rug. A 1.5-inch hem is then sewn around the edges, incorporating mitered corners for a neat and finished look. This step also allows for the creation of various custom shapes, such as octagonal, round, L-shaped, or other bespoke designs to fit unique interior spaces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xsm0Mg14n-A</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11510-3</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/INCkHK_j5bQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select the Correct Rug Pad Size and Material — Custom Landing Pad Order</video:title>
      <video:description>The next crucial step is to select a rug pad that is perfectly sized for your area rug and made from the recommended safe materials. First, accurately measure your area rug. The general rule is to choose a rug pad that is approximately one inch smaller than your area rug on all four sides. This ensures the pad remains hidden beneath the rug and prevents its edges from becoming a tripping hazard or visible. Based on the insights from previous steps, opt for a rug pad made from 100% natural rubber, 100% felt, or a combination of both. The video mentions that companies like Rug Pad USA offer various options, including custom orders, to fit exact dimensions and ensure compatibility with hardwood floors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/INCkHK_j5bQ</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11511-1</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BeGWZs_5GVM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Insert &amp; Prepare Fabric — Custom Landing Pad Order</video:title>
      <video:description>Begin by measuring the cushion insert from seam to seam to determine the required fabric dimensions. The example insert measures 19 inches by 19 inches. Select a loosely woven linen fabric that has been pre-washed, dried, and pressed. A loosely woven fabric is crucial as it allows for easy pulling of threads to create the desired fringe effect.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BeGWZs_5GVM</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11511-2</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nMNvPglvMtk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Fabric — Custom Landing Pad Order</video:title>
      <video:description>Begin by laying your chosen patterned fabric flat on a work surface, ensuring it is smooth and wrinkle-free. Using a measuring tape, measure 75cm (29.5 inches) for the length of the fabric. Next, measure 100cm (39.3 inches) for the width of the fabric. After taking these initial measurements, carefully fold the entire piece of fabric in half lengthwise, aligning the edges precisely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nMNvPglvMtk</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11511-3</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o4oknlfVzXk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Fabric for Seam Roll — Custom Landing Pad Order</video:title>
      <video:description>For the seam roll, cut two rectangular fabric pieces: one from 100% wool for the top and one from heavy-weight 100% cotton for the bottom. Each piece should measure 34 x 10 cm (13.5 x 4 inches). Additionally, cut a small rectangular piece of heavy-weight cotton for a hanging tag, measuring 10 x 5 cm (4 x 2 inches). To prepare the tag, fold it in half lengthwise (right sides together), then fold the raw long edges inwards to meet in the middle, creating a neat strip. Pin or clip the folds in place. Take it to the sewing machine and topstitch along both long edges to secure the folds.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o4oknlfVzXk</video:player_loc>
      <video:duration>59</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11513-1</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pY5CTWvt-0k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Proceed to Checkout and Complete Purchase — Custom Landing Pad Order</video:title>
      <video:description>Once the order details and discounts are verified, proceed to the checkout page. The video concludes with the view of the shopping cart total and the &apos;Proceed to checkout&apos; button, indicating the final step to complete the transaction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pY5CTWvt-0k</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11513-2</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/H-7gWCWsk6o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finalize Payment and Place Order — Custom Landing Pad Order</video:title>
      <video:description>Once all billing, shipping, and delivery preferences are set, and you have agreed to the website terms and conditions (by checking the relevant box), proceed to fill out your payment information. If paying by credit card, enter your card number, expiration date, and CVC. After verifying all details one last time, click the &apos;Place Order&apos; button to complete your purchase. You will receive a shipping tracking number once the order has been processed, which will also confirm the terminal address if you chose that option.</video:description>
      <video:player_loc>https://www.youtube.com/embed/H-7gWCWsk6o</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11513-3</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/s68OWW8Ax88/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Proceed to Checkout — Custom Landing Pad Order</video:title>
      <video:description>After adding items to your cart, a confirmation message will appear, indicating the item has been added. You can choose to continue shopping or proceed to checkout. To complete the purchase, click the &quot;Checkout&quot; button, usually located at the top or bottom of the cart summary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/s68OWW8Ax88</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11512-1</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3cI3o2dUjl0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select New Fabric and Paint Color — Custom Landing Pad Order</video:title>
      <video:description>The creator displays her chosen new fabric, a patterned textile featuring blue, brown, and cream tones. She also shows paint samples, highlighting &apos;Rolling Fog&apos; from Little Greene, which she has matched to darker neutral tones within the fabric pattern to ensure a cohesive color scheme for the upcycled chair. She mentions her intention to use a slightly darker shade for the cane backing to add depth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3cI3o2dUjl0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11512-2</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QD-Fymj7MeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Main Fabric and Lining — Custom Landing Pad Order</video:title>
      <video:description>The host eventually decides on the duck egg satin cotton for the main piece. For the lining, she chooses a grey fabric, explicitly stating her choice was influenced by the intention to use silver trims later, hoping for a cohesive look. This step concludes the primary fabric selection phase, demonstrating how complementary colors and textures are chosen to work together for the overall aesthetic of the reupholstered item.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QD-Fymj7MeQ</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11512-3</loc>
    <lastmod>2026-10-27T16:51:15.719Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aQyCNlAT5xI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reviewing Potential Paint Color Swatches — Custom Landing Pad Order</video:title>
      <video:description>The presenter mentions his partner, Jen, has been actively involved in selecting various design elements. The video then displays two specific paint swatches: &apos;Gray Screen&apos; (HGSW1467) and &apos;Raven Wing&apos; (HGSW1442). These swatches are being considered for the interior walls and potentially the future cabinets, linking directly to the context of cabinet painting with hybrid enamel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aQyCNlAT5xI</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-27T16:51:15.719Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11506-1</loc>
    <lastmod>2026-11-16T05:59:21.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Peel First Adhesive Strip — install stair treads</video:title>
      <video:description>Carefully peel back the protective paper strip from one of the adhesive sections on the back of the carpet stair tread. This exposes the adhesive for initial placement. Try to handle the adhesive surface as little as possible to maintain its stickiness.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-16T05:59:21.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11506-2</loc>
    <lastmod>2026-11-16T05:59:21.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — install stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-16T05:59:21.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11506-3</loc>
    <lastmod>2026-11-16T05:59:21.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — install stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-16T05:59:21.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11507-1</loc>
    <lastmod>2026-11-16T05:59:21.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — install stair treads</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-16T05:59:21.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11507-2</loc>
    <lastmod>2026-11-16T05:59:21.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — install stair treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-16T05:59:21.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11507-3</loc>
    <lastmod>2026-11-16T05:59:21.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — install stair treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-16T05:59:21.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11497-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NaCeB4efdr8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Acclimate New Hardwood Flooring — Hardwood Flooring Installation</video:title>
      <video:description>Upon delivery, the new hardwood flooring needs to acclimate to the home&apos;s indoor environment. Stack the bundles of hardwood planks in the rooms where they will be installed. Allow them to sit for approximately two to three weeks to adjust to the temperature and humidity levels inside the house. This prevents excessive expansion or contraction after installation, which can lead to gaps or buckling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NaCeB4efdr8</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11497-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jbaoHfxXW7o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Acclimate Wood Flooring Materials — Hardwood Flooring Installation</video:title>
      <video:description>Before installation, bring all wood flooring materials inside the home. Allow them to acclimate to the room&apos;s natural state of humidity for a specified period (usually several days to weeks, as per manufacturer guidelines). This crucial step prevents the wood from excessively expanding or contracting after installation, which could lead to unsightly gaps or warping throughout seasonal changes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jbaoHfxXW7o</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11497-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9MRhN3gDNeU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Acclimate the Flooring — Hardwood Flooring Installation</video:title>
      <video:description>Proper acclimation is crucial for a successful installation, aiming to equalize the flooring&apos;s moisture content with the home&apos;s environment before installation. First, measure the ambient temperature and humidity levels of the home using a hygrometer. The goal is for the flooring to acclimate to the homeowner&apos;s normal living conditions. Remove the hardwood planks from their cartons and sticker stack them, either on 2x4s or a pallet, as close to the installation area as possible. It is also a good practice to mix planks from several cartons while stacking to ensure a natural color variation when the flooring is installed. Allow the stacked flooring to acclimate for a minimum of 5 days. For extremely dry or humid climates, two or more weeks may be necessary. Use a moisture meter to test the planks regularly and confirm when the acclimation process is complete, comparing the readings to the ideal values found in Cali Bamboo installation guidelines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9MRhN3gDNeU</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11498-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7Cr_F63p45o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean and Prepare the Subfloor — Hardwood Flooring Installation</video:title>
      <video:description>Thoroughly clean the subfloor to ensure it is smooth, level, and free of any dirt, dust, or debris. Use a broom and dustpan to sweep up larger pieces, then follow with a vacuum cleaner (a shop-vac is ideal) to remove fine particles and ensure a completely clean surface. Any remaining debris can cause imperfections or instability in the new flooring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7Cr_F63p45o</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11498-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tmm648dcX4U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Subfloor — Hardwood Flooring Installation</video:title>
      <video:description>Thoroughly prepare the subfloor by ensuring it is smooth, flat, dry, clean, and solid. Remove any existing carpet staples or adhesive residue using a scraper or adhesive remover. Check for moisture and fill any large holes or cracks with self-leveling compound. Ensure all screws are countersunk. Sand down any uneven spots exceeding 5 millimeters using a belt sander. If replacing vinyl flooring installed prior to 1990, consult a professional due to potential asbestos concerns.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tmm648dcX4U</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11498-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kZJtYTdoaPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Subfloor Preparation — Hardwood Flooring Installation</video:title>
      <video:description>Begin the flooring installation process by meticulously preparing the subfloor. First, use a broom and scraper to remove any loose debris, dust, or hardened adhesive spills from previous work. Following this, employ a powered orbital sander equipped with a dust collection vacuum attachment to smooth out any uneven areas or persistent adhesive residue, ensuring the subfloor is as flat and clean as possible. This step is crucial for a successful and level flooring installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kZJtYTdoaPw</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11499-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/miJZQRplWXM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Flooring Direction — Hardwood Flooring Installation</video:title>
      <video:description>Before you begin laying the hardwood planks, you must determine the optimal direction for the flooring. The two primary considerations are: installing the hardwood parallel to the main incoming light source (e.g., from a window) or installing it parallel with the longest wall in the room. Choosing one of these directions often enhances the aesthetic appeal of the flooring and can make the room appear larger or more cohesive.</video:description>
      <video:player_loc>https://www.youtube.com/embed/miJZQRplWXM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11499-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OOfMm6WnwRo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan the Flooring Layout — Hardwood Flooring Installation</video:title>
      <video:description>Before laying any planks, you need to meticulously plan the entire floor layout. This involves measuring the room and determining how the rows of planks will be arranged. The goal is to ensure that the planks on either side of the room, particularly along opposing walls, are similar in size. This prevents awkward thin strips of flooring at the edges, contributing to a more balanced and professional aesthetic. A detailed project guide can help you through this planning process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OOfMm6WnwRo</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11499-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mWjBhzqptlg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Layout and Mark First Row — Hardwood Flooring Installation</video:title>
      <video:description>To ensure a good color and shade mixture, install the flooring planks from several cartons at the same time. Plan the layout of your floor; planks installed parallel to windows often accent the area best. Importantly, floors should always be installed perpendicular to the floor joists for structural integrity. In two places, at least 18 inches from the corner, measure out equal distances from the starting wall. This distance should be the face width of the starter board plus 1 inch. Mark these points and snap a chalk line through them. This measurement allows for the required 3/4 inch expansion gap between the flooring and the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mWjBhzqptlg</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11500-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/G5dIyLw2hUQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Install First Row (Straight Wall) — Hardwood Flooring Installation</video:title>
      <video:description>For the first row, begin by orienting the flooring planks so that the groove edge faces away from the starting wall. The installation should proceed from left to right. If your starting wall is perfectly straight, you will need to cut the first row planks to the required width, subtracting a quarter-inch (1/4&quot;) from the plank&apos;s width to allow for necessary expansion. Each plank&apos;s small tongue edge should be placed into the larger groove edge of the previously laid plank.</video:description>
      <video:player_loc>https://www.youtube.com/embed/G5dIyLw2hUQ</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11500-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_eS9JbZ3rJE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay the First Row of Planks — Hardwood Flooring Installation</video:title>
      <video:description>Begin laying the first row of planks, typically starting from the longest wall in the room. Ensure the tongue side of the plank faces the wall, and use spacers to maintain the required expansion gap between the flooring and the wall. In the video, the installers start near the accent wall. Lay subsequent planks in the first row by inserting the tongue into the groove of the previous plank and tapping gently with a rubber mallet and tapping block until they are securely interlocked.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_eS9JbZ3rJE</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11500-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7v71CAqFpIA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay First Row with Spacers — Hardwood Flooring Installation</video:title>
      <video:description>Place 1/2-inch spacers along the wall where you begin your first row of flooring. These spacers ensure an adequate expansion gap between the flooring and the wall, which is necessary for the planks to expand and contract with changes in humidity without buckling. Begin laying the first row of planks, making sure to cut the initial planks to the predetermined starting width if necessary (as per planning in Step 4). This specific flooring uses 4-inch and 6-inch wide random-width pieces, with a focus on laying full 4-inch pieces to start the row to simplify future cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7v71CAqFpIA</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11501-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m33cyzXRdPo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Rows — Hardwood Flooring Installation</video:title>
      <video:description>Continue installing subsequent rows of flooring by fitting the groove of the new board into the tongue of the previously installed board. Use a flooring nailer and a mallet to tap the boards tightly into place and secure them. If boards are slightly warped, work your way down the board, nailing and pushing it into place to straighten it out. You may need assistance to hold stubborn boards straight while nailing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m33cyzXRdPo</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11501-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U6a9dM_Bb9c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Flooring Rows — Hardwood Flooring Installation</video:title>
      <video:description>After installing the first row, proceed to lay the next rows of flooring. Slot the grooved edge of the new plank over the exposed tongue of the previously installed plank. Use a hammer and a rubber block to gently tap the planks together, ensuring the tongue and groove joint is closed tightly. Continue this process, driving nails every 6 inches at a 45-degree angle into the tongue of each plank to secure it to the subfloor. Ensure that the end joints between adjacent rows are spaced at least 18 inches apart to create a strong, stable floor and a random, aesthetically pleasing appearance. When you reach the end of a wall, cut the final board to size. The waste piece from the final board can often be used to begin the next row, minimizing material waste.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U6a9dM_Bb9c</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11501-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IanoYHLqPxg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Continue Installation and Finishing Touches — Hardwood Flooring Installation</video:title>
      <video:description>Continue the process of positioning, tapping, and blind-nailing planks, working your way across the room row by row. It is crucial to stagger the end joints of adjacent planks by at least 6-12 inches to distribute stress, prevent weakness in the floor, and create a visually appealing pattern. As you approach the final wall, the remaining space may become too narrow for the flooring nailer. For these last rows, you might need to use a specialized pull bar to tighten the planks, and then &apos;face nail&apos; them with a finish nailer, ensuring the nails are countersunk below the surface and the holes are filled with wood putty. After the flooring is fully installed, apply baseboards and other trim to cover the expansion gaps around the perimeter and complete the aesthetic look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IanoYHLqPxg</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11502-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ZkfMqY7PeE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Planks to Fit — Hardwood Flooring Installation</video:title>
      <video:description>As you near the end of a row or encounter obstacles (like doorframes or irregular walls), you will need to cut the last plank to fit the remaining space. First, accurately measure the space you need to fill using a measuring tape. Mark the precise cut line on the plank using a pencil and a square to ensure a straight and accurate cut. Then, use an appropriate cutting tool, such as a circular saw, jigsaw, or a specialized laminate cutter, to make the cut. Always ensure the cut edge faces the wall or obstacle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ZkfMqY7PeE</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11502-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kZJtYTdoaPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Fit Planks — Hardwood Flooring Installation</video:title>
      <video:description>Accurately measure each plank for its required length. Use a circular saw for straight, precise cross-cuts. For intricate shapes, such as around floor vents, pipes, or fireplace hearths, carefully trace the outline onto the plank and use a hand saw or jigsaw to make the necessary cutouts. For circular penetrations, a drill with a hole saw attachment will create clean, precise holes. Always ensure cuts are clean and fit snugly against walls or obstacles, allowing for proper expansion gaps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kZJtYTdoaPw</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11502-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Mv2rWwBt7gg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut End Board to Length &amp; Use Pull Bar — Hardwood Flooring Installation</video:title>
      <video:description>When reaching the end of a row or having to cut around an obstacle, place the board to be cut next to the last full board. Turn the new board 180 degrees and align it against the wall or obstacle. Mark the cut line at the point where the board meets the edge of the previous board, allowing for the required expansion gap (approximately 3mm). Take the board to a miter saw or circular saw with a guide and cut it to the marked length. Then, slip the cut board into place. For the last few boards, use a pull bar and hammer to pull them tightly into position against the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Mv2rWwBt7gg</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11503-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mWjBhzqptlg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fit and Secure the Final Row — Hardwood Flooring Installation</video:title>
      <video:description>For the final row, measure the remaining gap and rip the final planks to the required width using a circular saw. If the final row is less than 1 inch in width, it is recommended to glue it to the previous uninstalled row and face-nail them together as one unit. Position the ripped board into place. Use a pull bar (also known as a pry bar) and a rubber mallet to pull the final board tight against the previous row, ensuring a snug fit against the wall, then face-nail it into the subfloor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mWjBhzqptlg</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11503-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/he99be53Y_I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Final Row and Finish Trim — Hardwood Flooring Installation</video:title>
      <video:description>The final row of planks will almost certainly need to be ripped lengthwise to fit the remaining space. Carefully measure and cut these planks using a table or circular saw. Once all planks are installed, remove all the 1/2-inch spacers from around the perimeter of the room. Finish the installation by replacing your baseboards or adding new molding, such as quarter rounds, to cover all the expansion gaps you&apos;ve created. For areas like doorways where flooring transitions, a T-molding can be used to conceal the gap and provide a smooth transition.</video:description>
      <video:player_loc>https://www.youtube.com/embed/he99be53Y_I</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11503-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XGI80_sovRI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Final Flooring Row — Hardwood Flooring Installation</video:title>
      <video:description>For the final row of flooring, accurately measure the remaining width between the last full plank and the wall. Then, cut the planks for this row to the appropriate width using a hand saw, jigsaw, or miter saw, ensuring to account for the necessary expansion gap. Once cut, use a pull bar to carefully insert and engage the final planks into the previous row. A rubber mallet can be used with the pull bar to gently tap the planks into place. Throughout this process, double-check to maintain the required expansion gap along the wall to allow for any future movement of the floor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XGI80_sovRI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11504-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZLAZUSGnGdQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Baseboards — Hardwood Flooring Installation</video:title>
      <video:description>With the hardwood flooring fully installed, proceed to install the baseboards around the perimeter of the room. Measure each wall segment and cut the baseboard pieces to length, using a miter saw to create precise 45-degree angle cuts for inside and outside corners for a seamless joint. Place the baseboards against the wall, ensuring they cover the expansion gap left by the hardwood flooring. Secure the baseboards to the wall studs using a finish nailer and appropriate finish nails. Fill any nail holes with wood filler and caulk the top edge of the baseboards where they meet the wall for a clean, finished appearance (though these final finishing steps are not explicitly shown in the video).</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZLAZUSGnGdQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11504-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dFDdIzRRsGo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Baseboards — Hardwood Flooring Installation</video:title>
      <video:description>To give the room a finished appearance and conceal the expansion gaps, install baseboards (also known as skirting boards) along the perimeter of the room. Measure the length of each wall section where a baseboard is needed. Use a miter saw to cut the baseboards to the correct length and angle for corners (typically 45-degree cuts for inside and outside corners). Apply construction adhesive to the back of the baseboards, then position them against the wall and secure them with finishing nails, driven with a hammer or a nail gun, ensuring they are flush with the floor but not pressing down on the laminate. Continue until all walls are covered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dFDdIzRRsGo</video:player_loc>
      <video:duration>114</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11504-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/CHLNm1LPZf4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Attach Baseboard Trim — Hardwood Flooring Installation</video:title>
      <video:description>Install quarter-round molding (often called beading in the UK) along the perimeter of the hallway where the floor meets the baseboards. This trim piece covers the expansion gap left during flooring installation. Measure and cut the molding to fit precisely, ensuring mitered corners for a clean look. Use a pneumatic nail gun, such as the DeWalt model shown, to secure the molding to the baseboard, not into the floor, to allow for flooring expansion. Drive nails at an angle for a stronger hold.</video:description>
      <video:player_loc>https://www.youtube.com/embed/CHLNm1LPZf4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11505-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NaCeB4efdr8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Cleanup — Hardwood Flooring Installation</video:title>
      <video:description>Once the final coat of finish has cured sufficiently to be walked on, perform a thorough final cleanup. Use a backpack vacuum to remove any remaining dust and debris from the floor. Wipe down all surfaces, including baseboards and windowsills, to ensure a pristine finish. Double-check for any missed spots or messes created during the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NaCeB4efdr8</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11505-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kZJtYTdoaPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Cleanup — Hardwood Flooring Installation</video:title>
      <video:description>After all engineered hardwood planks are installed in a section or room, gather and relocate any remaining boxes of flooring, tools, or other construction materials that were temporarily stored on the finished surface. Thoroughly sweep and vacuum the newly installed floor to remove sawdust, debris, and any dirt. Finish by wiping down the floor with a clean, damp cloth to remove any smudges or residual dust, revealing the clean, finished surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kZJtYTdoaPw</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11505-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lmsY_hTosww/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sweep And Vacuum The Floor — Hardwood Flooring Installation</video:title>
      <video:description>After all flooring and trim are installed, perform a thorough clean-up. Sweep the entire floor to gather larger debris and then vacuum thoroughly to remove any remaining dust or small particles. This ensures the new floor is sparkling clean and ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lmsY_hTosww</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11495-1</loc>
    <lastmod>2026-10-26T21:22:53.572Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JsaT4NZbpDg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Individual Stair Components — Measure Stair Landing</video:title>
      <video:description>To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JsaT4NZbpDg</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-26T21:22:53.572Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11495-2</loc>
    <lastmod>2026-10-26T21:22:53.572Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Measure Stair Landing</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-26T21:22:53.572Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11495-3</loc>
    <lastmod>2026-10-26T21:22:53.572Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Measure Stair Landing</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-26T21:22:53.572Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11494-1</loc>
    <lastmod>2026-10-26T21:22:53.572Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JS1W3Ns2Zgw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Measurements and Platform Design — Measure Stair Landing</video:title>
      <video:description>Begin by accurately measuring the total rise (vertical height) and run (horizontal depth) for the entire staircase. Design an initial landing platform strategically to prevent the stairs from encroaching into adjacent spaces, such as a hallway. It is crucial to ensure adequate head space above this landing. If the initial platform height results in insufficient head clearance, adjust its level accordingly. Additionally, consider designing the landing platform to be about 12 inches longer than strictly necessary for a 3-foot wide stair tread, as this extra length can simplify turns and reduce the need for complex custom cuts later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JS1W3Ns2Zgw</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-10-26T21:22:53.572Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11494-2</loc>
    <lastmod>2026-10-26T21:22:53.572Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7JVqRk4dXPk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Landing Area — Measure Stair Landing</video:title>
      <video:description>Start by identifying the precise center point of the exterior doorway. Using a tape measure and a pencil, mark this center point on the house framing or wall. From this center, measure and mark the full width of the intended landing (5 feet in this case) and its depth (3 feet). These marks will serve as guides for the perimeter of the landing&apos;s structural frame.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7JVqRk4dXPk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-26T21:22:53.572Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11494-3</loc>
    <lastmod>2026-10-26T21:22:53.572Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jXRNrmIWEos/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Section — Measure Stair Landing</video:title>
      <video:description>The video begins by showcasing the L-shaped stair landing where carpet needs to be installed. The installer identifies this as the &apos;band&apos; section of the stairs. He then proceeds to measure the dimensions of this section, specifically the height of the riser and the length of the tread, using a tape measure. He aims for a height of approximately 4 3/8 inches and notes that he will cut the carpet slightly longer than the exact measurements to allow for trimming and adjustment during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jXRNrmIWEos</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-10-26T21:22:53.572Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11496-1</loc>
    <lastmod>2026-10-26T21:22:53.572Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — Measure Stair Landing</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-10-26T21:22:53.572Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11496-2</loc>
    <lastmod>2026-10-26T21:22:53.572Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/msA5WIK-EPs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Align Carpet Landing with Treads — Measure Stair Landing</video:title>
      <video:description>Begin by roughly placing the carpet landing piece in its designated area. The critical first step is to carefully line up the front edge of the carpet landing with the previously installed carpet stair treads. The landing carpet comes with a pre-molded bullnose edge; ensure this edge is correctly wrapped over the front of the landing, creating a tight and seamless transition with the stairs below.</video:description>
      <video:player_loc>https://www.youtube.com/embed/msA5WIK-EPs</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-26T21:22:53.572Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11496-3</loc>
    <lastmod>2026-10-26T21:22:53.572Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Measure Stair Landing</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-26T21:22:53.572Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11483-1</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qC8LN32ep_Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power — Garbage Disposal Cleaning</video:title>
      <video:description>For your safety, turn off the electrical power to the garbage disposal. Go to your home&apos;s main electrical panel and flip the circuit breaker that controls the disposal to the &apos;OFF&apos; position. If the disposal is a plug-in model, you can simply unplug it from the outlet under the sink.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qC8LN32ep_Q</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11483-2</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/waN5IeQaDc8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power to Garbage Disposal — Garbage Disposal Cleaning</video:title>
      <video:description>Locate the electrical panel and identify the circuit breaker labeled for the &apos;Dishwasher &amp; Disposal&apos;, typically a 20-amp breaker. Flip the breaker to the &apos;OFF&apos; position to cut power to the garbage disposal. Additionally, switch off the under-sink power switch for the disposal as an extra safety measure. Confirm that the disposal has no power by attempting to turn it on via the wall switch, ensuring no sound or operation occurs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/waN5IeQaDc8</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11483-3</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/C_pnSC_Uxck/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power at Breaker Box — Garbage Disposal Cleaning</video:title>
      <video:description>Go to your home&apos;s breaker box. Locate the circuit breaker that controls the power to the garbage disposal, which is often labeled &apos;Kitchen&apos; or &apos;Disposal&apos;. Flip the switch to the &apos;OFF&apos; position to cut all electricity to the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/C_pnSC_Uxck</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11484-1</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qhFtjsRE6FY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Leftover Food Debris — Garbage Disposal Cleaning</video:title>
      <video:description>Shine a flashlight into the garbage disposal opening to clearly see inside. Using a pair of kitchen tongs, carefully reach into the disposal and remove any large pieces of food, bones, silverware, or other debris that might be lodged. It is extremely important to *never* use your fingers for this step, even if the power is disconnected, as the blades can still be sharp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qhFtjsRE6FY</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11484-2</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qhFtjsRE6FY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Leftover Food Debris — Garbage Disposal Cleaning</video:title>
      <video:description>Shine a flashlight into the garbage disposal opening to clearly see inside. Using a pair of kitchen tongs, carefully reach into the disposal and remove any large pieces of food, bones, silverware, or other debris that might be lodged. It is extremely important to *never* use your fingers for this step, even if the power is disconnected, as the blades can still be sharp.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qhFtjsRE6FY</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11484-3</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/q__ZEvGYYAc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Debris — Garbage Disposal Cleaning</video:title>
      <video:description>Use a pair of tongs or a kitchen spoon to remove any visible debris from the garbage disposal drain. Be careful not to force anything and ensure you are only removing loose items.</video:description>
      <video:player_loc>https://www.youtube.com/embed/q__ZEvGYYAc</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11485-1</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EU23bi5Gl7s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub the Disposal — Garbage Disposal Cleaning</video:title>
      <video:description>With the power disconnected again, use a scrub brush or an old toothbrush for a detailed cleaning. Wet the brush head with warm water and apply a small amount of grease-cutting dish soap. Reach into the disposal and scrub all accessible surfaces, including the rubber splash guard and the inside walls of the grinding chamber. After scrubbing, remove the brush, reconnect the power, and flush the disposal with hot water one more time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EU23bi5Gl7s</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11485-2</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EU23bi5Gl7s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub the Disposal — Garbage Disposal Cleaning</video:title>
      <video:description>With the power disconnected again, use a scrub brush or an old toothbrush for a detailed cleaning. Wet the brush head with warm water and apply a small amount of grease-cutting dish soap. Reach into the disposal and scrub all accessible surfaces, including the rubber splash guard and the inside walls of the grinding chamber. After scrubbing, remove the brush, reconnect the power, and flush the disposal with hot water one more time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EU23bi5Gl7s</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11485-3</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9niGVcuJ9jE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub the Disposal Opening — Garbage Disposal Cleaning</video:title>
      <video:description>Using a long-handled scrub brush and soapy water, thoroughly scrub around the disposal opening in the sink. Push the brush down into the disposal&apos;s flange and scrub the underside of the rubber splash guard (baffle) to remove built-up grime and food particles. If your baffle is removable, take it out for easier and more thorough cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9niGVcuJ9jE</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11486-1</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kbkBPM6MqMY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deodorize and Sharpen — Garbage Disposal Cleaning</video:title>
      <video:description>To deodorize and sharpen the disposal, place citrus peels (like lemon or lime) and a handful of ice cubes into the disposal. Turn on the cold water and run the disposal until the grinding stops. The citrus adds a fresh scent, and the abrasive ice sharpens the impellers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kbkBPM6MqMY</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11486-2</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mRTPdEa7DuM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deodorize with Citrus Peel — Garbage Disposal Cleaning</video:title>
      <video:description>For the final step in maintaining a fresh-smelling garbage disposal, take a few pieces of citrus peel, such as lemon, orange, or lime peel, and place them into the garbage disposal opening. Turn on the cold water tap to a slow, steady stream. With the water running, turn on the garbage disposal and allow it to run until the citrus peels are completely ground up and flushed away. The natural oils and refreshing scent released from the citrus peels as they are ground will effectively deodorize the disposal, neutralizing any lingering odors and leaving your kitchen with a clean, pleasant aroma. Once this process is complete, you can reinsert the cleaned rubber splash guard back into the drain opening, and your garbage disposal will be fresh and ready for use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mRTPdEa7DuM</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11486-3</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0nCfSvuboH4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Deodorize with Citrus Peels — Garbage Disposal Cleaning</video:title>
      <video:description>Whenever you use citrus fruits (like oranges, lemons, grapefruit, or limes), place the peels down your garbage disposal and run them with cold water. The citrus oils will naturally clean and deodorize the disposal, leaving a fresh, clean scent. If the disposal is particularly funky, cut up an entire lemon and grind it to provide a stronger deodorizing effect.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0nCfSvuboH4</video:player_loc>
      <video:duration>107</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11487-1</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fOrrBn5kvlM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Finish — Garbage Disposal Cleaning</video:title>
      <video:description>After the disposal has run for about a minute, continue to let the cold water run to rinse away all the soap suds and loosened debris. Once you hear that the disposal is clear and running smoothly, you can turn off the disposal switch first. Let the water run for a few more seconds to ensure the drain pipe is fully flushed, then turn off the faucet. The garbage disposal is now clean and deodorized.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fOrrBn5kvlM</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11487-2</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fOrrBn5kvlM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse and Finish — Garbage Disposal Cleaning</video:title>
      <video:description>After the disposal has run for about a minute, continue to let the cold water run to rinse away all the soap suds and loosened debris. Once you hear that the disposal is clear and running smoothly, you can turn off the disposal switch first. Let the water run for a few more seconds to ensure the drain pipe is fully flushed, then turn off the faucet. The garbage disposal is now clean and deodorized.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fOrrBn5kvlM</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11487-3</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0nCfSvuboH4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Use Plenty of Water for Disposal — Garbage Disposal Cleaning</video:title>
      <video:description>Before operating the garbage disposal, turn on the cold water and let it run. Continue running the water while the disposal is grinding food waste. After turning off the disposal, let the cold water run for approximately 10 seconds to flush all ground food particles out of the drain lines.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0nCfSvuboH4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11488-1</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9niGVcuJ9jE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power — Garbage Disposal Cleaning</video:title>
      <video:description>Plug the garbage disposal back into the wall outlet or turn the circuit breaker back on. This is necessary to run the disposal in the following cleaning steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9niGVcuJ9jE</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11488-2</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9voAC5oX0M8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Press Reset Button — Garbage Disposal Cleaning</video:title>
      <video:description>Once the jam is cleared, you need to restore power. Return to the main electrical service panel and flip the circuit breaker for the disposal back to the &apos;ON&apos; position. Next, locate the red reset button on the bottom of the garbage disposal unit. Press this button firmly. It should click and stay depressed, which resets the unit&apos;s internal overload protector.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9voAC5oX0M8</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11488-3</loc>
    <lastmod>2026-10-26T15:09:32.545Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mZoYdio0PWs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Restore Power and Test for Leaks — Garbage Disposal Cleaning</video:title>
      <video:description>Return to the electrical service panel and flip the circuit breaker back to the &apos;ON&apos; position to restore power to the disposal outlet. Verify power is restored at the outlet using your non-contact voltage tester. If your disposal uses an air switch, plug the air switch&apos;s power cord into the outlet first, then plug the garbage disposal&apos;s power cord into the back of the air switch. Finally, run water into the sink and activate the disposal briefly. Immediately check all plumbing connections under the sink (main drain pipe, dishwasher drain hose, and mounting collar) for any signs of leaks to ensure a successful installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mZoYdio0PWs</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-10-26T15:09:32.545Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11474-1</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mHLDm7RlGTQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select a Proper Ironing Board — Ironing Clothes</video:title>
      <video:description>The first and most crucial tool for ironing is a proper ironing board. It should be solid and stable, not flimsy like cheaper $10-$20 models, to prevent tipping and provide a consistent surface. The board should be long enough to fit the entire length of pants (at least 48 inches long and 18 inches wide). Many boards include an iron rest and a cable feed to prevent tangling and re-wrinkling. The board must also have a nice, padded cover over a perforated metal surface to allow steam to pass through efficiently for better and faster results. Ensure the padding is thick enough so you cannot feel the metal pattern underneath, which could otherwise transfer to the garment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mHLDm7RlGTQ</video:player_loc>
      <video:duration>115</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11474-2</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NN5QthNBCsw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Set Up Ironing Station and Prepare Garment — Ironing Clothes</video:title>
      <video:description>Choose a stable and heat-resistant surface for your ironing board. Unfold the garment you intend to iron and lay it out as flat as possible on the ironing board, smoothing out any initial large creases with your hands. Ensure the garment is positioned to allow easy access to all sections for efficient ironing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NN5QthNBCsw</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11474-3</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/h9FIoGvW3bw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Items and Set Up Ironing Station — Ironing Clothes</video:title>
      <video:description>Begin by taking the dried bandanas (or other clothing items you wish to fold) from the dryer or laundry pile. Transport them to your ironing station. Unfold the built-in ironing board from its cabinet, then retrieve the iron and place it on the board. Plug in the iron and turn on its power and desired heat setting (e.g., &apos;wool&apos; setting as shown, or an appropriate setting for cotton). Ensure any necessary lights for the ironing station are switched on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/h9FIoGvW3bw</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11475-1</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mHLDm7RlGTQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Use Distilled Water and Spray Bottle — Ironing Clothes</video:title>
      <video:description>Distilled water is highly recommended for use in your iron&apos;s steam reservoir, especially if you live in an area with hard water or lack a water softening system. Using regular tap water can lead to mineral buildup inside the iron, shortening its lifespan and potentially causing white, grey, or brownish mineral deposits to stain your garments. A separate misty spray bottle filled with distilled water can also be used to evenly moisten garments before ironing, avoiding concentrated wet spots that a built-in iron spray nozzle might create.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mHLDm7RlGTQ</video:player_loc>
      <video:duration>89</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11475-2</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3zhxWvvKpfA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Iron Clothes with Steam — Ironing Clothes</video:title>
      <video:description>Thanks to Philips&apos; OptimalTEMP technology, there&apos;s no need to manually adjust the temperature setting on your iron for different fabric types. You can iron any fabric, from denim to silk, without worrying about burns. Simply start ironing any garment without sorting them first. To generate powerful, continuous steam, press and hold the steam trigger located on the handle of the iron. This continuous steam helps to moisten fabrics more effectively and remove wrinkles faster. After applying steam, for best results, perform the final strokes without steam to set the fabric smoothly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3zhxWvvKpfA</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11475-3</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3zhxWvvKpfA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill Water Tank — Ironing Clothes</video:title>
      <video:description>To prepare for ironing, fill the water tank of your steam generator. Locate the water tank (which may be detachable or non-detachable, as is the case with the Philips PerfectCare Performer example shown). If detachable, remove it. Fill the tank with tap water up to the &apos;MAX&apos; indicator line. It&apos;s crucial *not* to use any descaling agents or scented water in the tank, as these can cause damage or other operational problems. If your tank is detachable, reattach it by fitting the bottom first and pushing it in until you hear a secure &apos;click&apos;.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3zhxWvvKpfA</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11477-1</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/d99A8XjKETM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dampen and Iron Shirt — Ironing Clothes</video:title>
      <video:description>To make ironing wrinkled dress shirts quicker and more effective, prepare a spray bottle filled with water. Place the wrinkled shirt on an ironing board. Lightly and evenly mist the entire shirt with water until the fabric feels damp, but not soaked. Ensure that the water is distributed consistently across the shirt&apos;s surface. Once damp, proceed with your regular ironing routine. The moisture helps to relax the fabric fibers, allowing the iron to smooth out wrinkles with greater ease and in less time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/d99A8XjKETM</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11477-2</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NN5QthNBCsw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Finish Ironing and Hang Garment — Ironing Clothes</video:title>
      <video:description>Proceed to iron all parts of the garment, including collars, cuffs, sleeves, and body, repeating the spray and iron steps as necessary. Once the garment is entirely free of wrinkles, carefully lift it from the ironing board. To prevent new creases from forming, immediately place the freshly ironed garment on a suitable hanger. This completes the ironing process for that item.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NN5QthNBCsw</video:player_loc>
      <video:duration>650</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11477-3</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NN5QthNBCsw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Iron the Garment Section by Section — Ironing Clothes</video:title>
      <video:description>Set your traditional iron (the presenter uses a Black+Decker Digital Advantage Iron D2030, which can function as a steam iron though she primarily sprays) to the appropriate temperature for the fabric type. Begin ironing by pressing the iron onto the dampened area of the garment. Use a steady, back-and-forth motion, applying gentle pressure. Work on one section at a time, repositioning the garment on the ironing board as needed to ensure all areas are smoothly ironed. The presenter methodically irons various parts of the plaid shirt and later a grey/black striped garment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NN5QthNBCsw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11478-1</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dEeXZ8XHsRs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Pressing and Creasing — Ironing Clothes</video:title>
      <video:description>Return the pant leg to the ironing station. Carefully lay the pant leg on the pressing surface, ensuring the newly sewn seam is flat. Using a hot iron with plenty of steam, press the new seam open and flat. This step is crucial for achieving a professional finish, preventing bulk, and ensuring the seam lays smoothly. After pressing the seam, position the pant leg to create the main front and back creases of the trousers. Align the pant leg precisely to ensure the creases are straight and sharp. Use the iron with steam, pressing firmly along the desired crease lines. The goal is to set deep, crisp creases that elevate the formal appearance of the trousers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dEeXZ8XHsRs</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11478-2</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SKqTfIeVj8k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Iron the First Section of Pleats — Ironing Clothes</video:title>
      <video:description>Once the garment is laid flat and the iron is hot, begin to iron the pleats. The video shows the person using their left hand to hold down and carefully straighten a section of pleats, ensuring they are perfectly aligned. With their right hand, they steadily move the heavy dry iron along the length of these pleats, applying consistent and firm pressure. This action helps to set the fold and remove any wrinkles from the fabric. Focus on pressing each pleat individually and thoroughly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SKqTfIeVj8k</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11478-3</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SKqTfIeVj8k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Continue Ironing Remaining Pleats — Ironing Clothes</video:title>
      <video:description>Repeat the ironing process for the newly aligned section of pleats. As demonstrated throughout the video, the person continuously holds the pleats taut and flat with one hand, then presses them firmly with the heavy dry iron with the other. This cycle of repositioning and ironing is repeated until all pleats on the garment have been thoroughly pressed. Pay close attention to the waistband area as well, ensuring it is smooth and wrinkle-free.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SKqTfIeVj8k</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11479-1</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SKqTfIeVj8k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Iron the First Section of Pleats — Ironing Clothes</video:title>
      <video:description>Once the garment is laid flat and the iron is hot, begin to iron the pleats. The video shows the person using their left hand to hold down and carefully straighten a section of pleats, ensuring they are perfectly aligned. With their right hand, they steadily move the heavy dry iron along the length of these pleats, applying consistent and firm pressure. This action helps to set the fold and remove any wrinkles from the fabric. Focus on pressing each pleat individually and thoroughly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SKqTfIeVj8k</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11479-2</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SKqTfIeVj8k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Garment and Ironing Station — Ironing Clothes</video:title>
      <video:description>Begin by laying the pleated white garment, such as a school uniform skirt, flat on a stable and well-padded ironing surface. Ensure the fabric is smooth and that the pleats are aligned as neatly as possible before starting. Plug in the heavy dry iron and allow it to heat up to the appropriate temperature for the garment&apos;s fabric type. The video shows a traditional heavy iron being used without steam.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SKqTfIeVj8k</video:player_loc>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11479-3</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8kaq6VidTA4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Iron the dress as needed, never dragging the Iron but pressing it instead — Ironing Clothes</video:title>
      <video:description>With the chiffon hem firmly secured by the pins on the ironing board, take a steam iron. The video shows a &apos;Rowenta Compact Steam&apos; iron being used. Gently press the iron down onto the pinned pleats, applying steady, even pressure. It is critical to use a lift-and-press motion, rather than dragging the iron across the fabric. Dragging can distort the pleats or stretch the delicate chiffon. Repeat this pressing motion across the entire pinned section of the hem. The heat and steam from the iron will help to restore the crispness and definition of the pleats.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8kaq6VidTA4</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11480-1</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mHLDm7RlGTQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Utilize a Pressing Cloth or Teflon Soleplate — Ironing Clothes</video:title>
      <video:description>A pressing cloth is essential to protect delicate fabrics, especially wool garments, from direct iron heat which can cause a shiny appearance. Place the pressing cloth between the iron and the garment. Use a 100% linen or cotton lint-free cloth, or even an old, thin shirt. Alternatively, a Teflon soleplate that hooks onto your iron provides protection and a smooth glide. Either option works best with a vacuum board to handle the steam effectively.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mHLDm7RlGTQ</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11480-2</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SQ7XrOOTL-Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Iron the Embroidered Satin Carefully — Ironing Clothes</video:title>
      <video:description>If you choose to iron your embroidered satin fabric, set your iron to a low heat setting. The presenter suggests using the &apos;silk&apos; or &apos;polyester&apos; setting. To further protect the delicate satin and the embroidery stitches, place a &apos;shim&apos; (a pressing cloth) between the iron and the embroidered area. Gently press the fabric to smooth out any wrinkles and help relax any remaining pulling, ensuring a flat and polished final product.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SQ7XrOOTL-Q</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11480-3</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IbdCkq-ftJY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Iron Moist Linen for a Crisp Finish — Ironing Clothes</video:title>
      <video:description>To achieve a sharp, crisp look and minimize wrinkles, iron linen while it is still moist, ideally directly out of the washing machine before it fully dries. Most irons have a specific &apos;Linen&apos; setting, which is typically the highest heat setting due to linen&apos;s durability. If the garment is a linen blend (e.g., 60% Excel, 40% Linen as shown in the video), adjust the iron&apos;s heat setting down to suit the blend&apos;s requirements to prevent scorching or damage. This technique effectively smooths out wrinkles and gives linen a refined appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IbdCkq-ftJY</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11481-1</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1HWmsyuKGhs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove and Inspect De-wrinkled Clothes — Ironing Clothes</video:title>
      <video:description>After the dryer cycle finishes, immediately open the dryer door and remove your garments. The steam action should have significantly reduced or eliminated the wrinkles. For best results, promptly hang the clothes on hangers or fold them neatly. This helps to prevent any new wrinkles from forming as the clothes cool down and set. This method offers a quick and energy-efficient alternative to traditional ironing, particularly useful for a single item or a small load needing a rapid refresh before being worn.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1HWmsyuKGhs</video:player_loc>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11481-2</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1HWmsyuKGhs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove and Inspect De-wrinkled Clothes — Ironing Clothes</video:title>
      <video:description>After the dryer cycle finishes, immediately open the dryer door and remove your garments. The steam action should have significantly reduced or eliminated the wrinkles. For best results, promptly hang the clothes on hangers or fold them neatly. This helps to prevent any new wrinkles from forming as the clothes cool down and set. This method offers a quick and energy-efficient alternative to traditional ironing, particularly useful for a single item or a small load needing a rapid refresh before being worn.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1HWmsyuKGhs</video:player_loc>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11481-3</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4aOinSfiXNU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hang Selected Clothing Items — Ironing Clothes</video:title>
      <video:description>Select specific garments from the folded pile that would benefit from being hung. Place each chosen item carefully onto a hanger, ensuring it&apos;s properly positioned to avoid creases, and then organize these hung clothes within the closet space. This helps maintain the garment&apos;s structure and makes them easily accessible.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4aOinSfiXNU</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11482-1</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3zhxWvvKpfA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Post-Ironing Storage and Maintenance — Ironing Clothes</video:title>
      <video:description>After you&apos;ve finished ironing, Philips PerfectCare steam generators allow you to leave the iron directly on the ironing board cover without causing any burns, thanks to their safe soleplate temperature. This feature helps reduce wrist discomfort by minimizing the need to repeatedly lift the iron to and from its base. Additionally, it is highly recommended to empty the water tank of your steam generator once you have completed your ironing load. This practice helps prevent stagnant water issues and maintains the longevity of the appliance. If your model has a &apos;carry lock&apos; feature, engage it to securely lock the iron onto the steam generator base, allowing you to safely carry and store the entire unit by its handle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3zhxWvvKpfA</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11482-2</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cDpbPTuGEUY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-Soak the Soleplate — Ironing Clothes</video:title>
      <video:description>Carefully place the unplugged and completely cool iron face down onto the thoroughly wet cotton towel. Ensure the entire surface of the soleplate is in contact with the damp cloth. Let the iron rest in this position for about 5 minutes. The moisture from the towel will begin to penetrate and soften any caked-on residue, making it easier to remove in subsequent steps. After 5 minutes, lift the iron to observe if any dirt has transferred to the towel, indicating the loosening process has begun.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cDpbPTuGEUY</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11482-3</loc>
    <lastmod>2026-10-24T14:22:36.246Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cDpbPTuGEUY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Steam Clean and Final Polish — Ironing Clothes</video:title>
      <video:description>Rinse the cotton towel used earlier under water to clean it, then wring it out so it&apos;s damp but not soaking wet. Lay it flat on the baking sheet. Now, plug in the iron and fill its water reservoir. Set the iron to its highest heat setting and allow it to fully heat up. Once hot, press the iron down onto the damp towel and move it back and forth, as if ironing. Use the steam burst function repeatedly to force steam through the soleplate holes, which helps to dislodge any remaining debris from the vents and further clean the surface. Continue this process until you see no more grime coming off onto the towel and steam flows freely from the holes. **WARNING:** As mentioned previously, only perform this hot ironing method on stainless steel soleplates. Do NOT do this on irons with non-stick or Teflon coatings, as the heat and friction can damage the coating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cDpbPTuGEUY</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-10-24T14:22:36.246Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11466-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yUhZhEr9z4U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Pipes and Measure for Insulation — Pipe Insulation</video:title>
      <video:description>Before purchasing insulation, use a tape measure to determine the correct diameter of your pipes to ensure you buy the appropriate size. Once you have the insulation, go ahead and clean off your pipes thoroughly. Remove any dust, dirt, grease, or debris to ensure proper adhesion and a clean installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yUhZhEr9z4U</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11466-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ko4yYx_OwOc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Pipes — Pipe Insulation</video:title>
      <video:description>The process begins by ensuring all accessible water pipes are clean. Use a damp cloth and a mild cleanser to thoroughly remove any dirt or grease that may be present on the pipe surfaces. Once cleaned, measure the length of each pipe section that requires insulation, as well as the diameter of the pipes. Accurate measurements are crucial to ensure you purchase and cut the correct amount of insulation material for the job.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ko4yYx_OwOc</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11466-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EtYcS3X2rDo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Pipe Size and Measure Length — Pipe Insulation</video:title>
      <video:description>Before purchasing insulation, you need to identify the diameter of your pipes. The video shows examples of three common pipe sizes: half-inch (the smallest, often found in residential homes), three-quarter inch (the next size up), and one-inch (the largest size commonly seen in residential applications, though less frequently). The presenter advises measuring a section of the pipe to get a rough estimate of the total length needed. Pipe insulation comes in five-foot sticks and is available at home improvement stores like Lowe&apos;s or Home Depot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EtYcS3X2rDo</video:player_loc>
      <video:duration>62</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11467-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TLP9EreeE80/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose the Right Pipe Insulation Material — Pipe Insulation</video:title>
      <video:description>The goal is to insulate the pipes. While fiberglass insulation is an option, it can be difficult to wrap around complex areas like floor joists, valves, hangers, tees, and elbows. A more convenient solution is foam pipe insulation, which is designed for easy installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TLP9EreeE80</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11467-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XxbtlKW2-wU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select and Understand Insulation Types — Pipe Insulation</video:title>
      <video:description>Two popular types of pipe insulation are fiberglass pipe wrap and tubular pipe sticks, both readily available in the plumbing aisle of your local Home Depot or at homedepot.com. Fiberglass pipe wrap is suitable for high-heat areas like near furnaces and water heaters, where tubular insulation is not recommended. It&apos;s also ideal for pipes with many bends and turns due to its flexibility. When working with fiberglass, wear a dust mask and a long-sleeve shirt in addition to safety glasses and work gloves, as small glass particles can break off and cause irritation. Tubular pipe sticks come in various sizes and are best for copper and iron pipes with long, straight runs. Measure your pipes to ensure you select the appropriate pipe stick size. Some pipe sticks are pre-slit with an adhesive, allowing for easy application around pipes and convenient sealing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XxbtlKW2-wU</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11467-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o_3d6UK3Xjs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Insulation onto Existing Piping — Pipe Insulation</video:title>
      <video:description>With the insulation acquired, locate the section of water pipe that needs insulation. For homes that already have their water lines installed, take the pre-split foam pipe insulation and carefully open it along its length. Gently slide the opened insulation over the water pipe, ensuring the pipe is fully enclosed by the insulation without any gaps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o_3d6UK3Xjs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11468-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XKGDj8YMmTI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Insulation — Pipe Insulation</video:title>
      <video:description>Take a length of the new pipe insulation and position it next to the bare pipe to measure the required length. It is recommended to add about an inch to your measurement to ensure it&apos;s slightly longer than needed. This provides a margin for error, as it&apos;s easier to trim excess length than to find the insulation is too short. After measuring, use a utility knife or scissors to cut the new insulation to the determined length. Place it back in position to confirm it is the proper length before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XKGDj8YMmTI</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11468-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uZE4wjC-c7c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Insulation to Size — Pipe Insulation</video:title>
      <video:description>Begin by accurately measuring the length and circumference of the pipe sections that require insulation. For straight sections, measure the length. For bends and T-joints, measure the required length and outline the necessary shapes on the Armaflex material to ensure a precise fit. The video demonstrates measuring both a flat sheet of insulation for custom shapes and a pre-slit tube for straight pipe sections. Once measured, carefully cut the Armaflex insulation to the desired length and diameter using a sharp knife or a specialized cutting tool to ensure clean edges.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uZE4wjC-c7c</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11468-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FqGrYK_jRkQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Vertical Pipe Insulation Section — Pipe Insulation</video:title>
      <video:description>Using a tape measure, measure the length of a straight vertical section of a 3/4-inch copper pipe to be insulated, for example, 11 inches. Then, take a piece of 3/4-inch pipe insulation and use the sheetrock knife to cut it to the measured length. For pipe bends, make a 45-degree angle cut on one end of the insulation. Test the fit on the pipe. If the piece is slightly too long, trim off approximately a half-inch from the straight end to achieve a perfect fit. The goal is to ensure the insulation covers the pipe snugly without gaps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FqGrYK_jRkQ</video:player_loc>
      <video:duration>105</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11469-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dKxdpYPf7DU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut and Apply Pipe Insulation — Pipe Insulation</video:title>
      <video:description>To apply the insulation, first, cut the &apos;Insul-Lock&apos; pipe insulation to the desired length using a utility knife or a box cutter. The insulation comes pre-slit, so you simply open it along the slit. Then, slide the opened insulation over the pipe. Once in place, peel away the plastic backing to expose the self-adhesive strip. Finally, press the edges of the insulation firmly together around the pipe to seal it completely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dKxdpYPf7DU</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11469-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yUhZhEr9z4U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Basic Foam Insulation Installation — Pipe Insulation</video:title>
      <video:description>Most foam insulation comes with a pre-cut slit on one edge. To install, simply open this slit by gently pulling it apart and slip the foam directly over the pipe. Align the insulation so it covers the straight sections of the pipe completely. Some foam might have an adhesive on the slit, but for those that don&apos;t, you can use tape later to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yUhZhEr9z4U</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11469-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Jf-pvf4TZaM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply and Secure the Insulation — Pipe Insulation</video:title>
      <video:description>Open the slit insulation and wrap it around the straight pipe section, ensuring it is properly aligned and covers the desired area, typically between flanges or connectors. Once positioned, press the edges of the longitudinal slit firmly together to seal the insulation. The insulation&apos;s inherent flexibility and possibly an adhesive seam (though not explicitly shown) will help it seal. Push and smooth the insulation along its length and at the ends to ensure a tight, even fit against the pipe and flush with any adjacent components like pipe flanges.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Jf-pvf4TZaM</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11470-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_VrdZpfmXa4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Insulate Second Elbow and Secure All Insulation with Tape — Pipe Insulation</video:title>
      <video:description>Next, identify any additional elbow joints that require insulation. The video shows a second elbow piece. Take another pre-formed foam elbow insulation piece, open its seam, and carefully position it around this second elbow joint, ensuring it also fits snugly and covers the entire bend. Once both elbow insulation pieces are in place and their pre-split seams are pressed together, the next crucial step, as indicated by the narration, is to tape them up. Use a durable outdoor-rated insulation tape, such as PVC plumbing tape or all-weather duct tape, to tightly secure the seams of both installed elbow insulation pieces. Also, wrap the tape around the ends of the elbow insulation where they meet the straight pipe insulation or the bare pipe itself to create a weather-resistant seal and prevent moisture ingress. Ensure the tape is wrapped firmly without excessively compressing the foam, which could reduce its insulating properties.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_VrdZpfmXa4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11470-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/riUHR7rZbf4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Insulation on Fittings — Pipe Insulation</video:title>
      <video:description>For corners and T-junctions, use the pre-formed foam fittings. Place the foam tee or elbow fitting over the corresponding pipe junction. Then, measure and cut straight pieces of foam insulation to butt up tightly against the ends of the fittings. The goal is to be as precise as possible to eliminate any exposed pipe, as air gaps will allow heat to escape and reduce the effectiveness of the insulation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/riUHR7rZbf4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11470-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/riUHR7rZbf4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Insulation on Fittings — Pipe Insulation</video:title>
      <video:description>For corners and T-junctions, use the pre-formed foam fittings. Place the foam tee or elbow fitting over the corresponding pipe junction. Then, measure and cut straight pieces of foam insulation to butt up tightly against the ends of the fittings. The goal is to be as precise as possible to eliminate any exposed pipe, as air gaps will allow heat to escape and reduce the effectiveness of the insulation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/riUHR7rZbf4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11471-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ufl67R7QZCE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Sealing and Finishing — Pipe Insulation</video:title>
      <video:description>After installing all insulation pieces, it&apos;s crucial to seal every joint where pieces butt or overlap. This is done by applying pipe lap tape securely over each seam. Additionally, any raw or exposed ends of the fiberglass insulation, especially at cuts and bevels, should be sealed using a vapor barrier material or &quot;pookie&quot; (insulation mastic/sealant), such as CP-11 or CP-35, depending on job specifications and environmental conditions. Staples should also be used to reinforce the lap tape and ensure all insulation is tightly bound together. These sealing steps are vital for maintaining the insulation&apos;s integrity and preventing moisture ingress. The cuts demonstrated are geared towards beginners learning to make precise fits, though experienced workers often &quot;wing it&quot; due to familiarity with measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ufl67R7QZCE</video:player_loc>
      <video:duration>113</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11471-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wtO7UAHxId8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Joint Sealing Tape — Pipe Insulation</video:title>
      <video:description>Carefully unroll the aluminum foil tape and peel off its protective backing. Apply the tape over all seams, joints, and any minor gaps between the installed insulation boards. Press the tape firmly, working out any air bubbles, to ensure a complete and airtight seal. Pay particular attention to corners and edges, wrapping the tape around them if necessary, to create a continuous vapor and air barrier. This step is crucial for the insulation&apos;s performance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wtO7UAHxId8</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11471-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/n1d7jwsDy7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Insulation Seams — Pipe Insulation</video:title>
      <video:description>To achieve a better seal on the seams of the installed insulation, aluminized tape can be used. This tape should be placed directly over the joint seams after the insulation is already on the pipe. The video explicitly warns against using masking tape or duct tape as they can dry out, fall off, or even melt onto the insulation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/n1d7jwsDy7E</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11472-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c-P9viRRst8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Aluminum Jacketing to Straight Pipe — Pipe Insulation</video:title>
      <video:description>Take a pre-cut piece of smooth aluminum jacketing, which is pre-curled to fit the outer diameter (OD) of the pipe insulation. The jacketing has a blue moisture barrier on the inside. Carefully open the aluminum jacketing and place it over the insulated pipe section. Ensure that the seam of the jacketing is facing downwards to prevent water from collecting on it and potentially penetrating the jacketing. For exterior use, it&apos;s highly recommended to apply a bead of silicone caulk along the seam and all overlaps to ensure a watertight seal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c-P9viRRst8</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11472-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7UCnaIXxRVw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Metal Jacketing — Pipe Insulation</video:title>
      <video:description>After the insulation is secured, apply metal jacketing over the insulated pipe sections. The metal jacketing provides a protective outer layer. Temporarily hold the jacketing in place using flexible straps, ensuring they overlap the metal to maintain a snug fit. Once the jacketing is properly aligned and temporarily held, permanently secure it by applying durable metal bands around the circumference of the pipe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7UCnaIXxRVw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11472-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ODYuDplIZsA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Metal Jacketing for Weather Protection — Pipe Insulation</video:title>
      <video:description>Enclose the entire insulated pipeline, including the multi-layered vapor barrier system, with pre-formed metal jacketing. This outer layer, typically made of aluminum or stainless steel, provides robust weather protection against UV radiation, rain, and mechanical impact, significantly prolonging the life of the insulation system and maintaining its aesthetic appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ODYuDplIZsA</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11473-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uZE4wjC-c7c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Final Quality Check — Pipe Insulation</video:title>
      <video:description>After all the Armaflex insulation has been installed, conduct a thorough visual and tactile check of the entire pipework system. Look for any unsealed gaps, creases, or areas where the insulation might not be completely adhered. Ensure that all seams are tightly closed and that there are no exposed pipe surfaces. Proper installation without gaps guarantees optimal thermal performance, prevents condensation buildup, and maximizes the energy efficiency benefits of the Armaflex insulation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uZE4wjC-c7c</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11473-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UiU1rPeizJA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Curing — Pipe Insulation</video:title>
      <video:description>After smoothing, perform a final visual inspection of the entire insulated elbow. Check for any missed spots, uneven areas, or potential air gaps. If necessary, apply small additional amounts of sealant to any imperfections and smooth them out. Allow the sealant to cure completely according to the manufacturer&apos;s recommendations before exposing the insulated pipe to its operational environment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UiU1rPeizJA</video:player_loc>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11473-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/sf5l1ObxSJc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection — Pipe Insulation</video:title>
      <video:description>Once all the insulation is in place, perform a final inspection to confirm that all hot and cold water pipes, elbows, and valves (with the exception of safety devices like the T&amp;P valve) are completely and securely covered. Check for any visible gaps, loose seams, or areas where the insulation might have come apart. If necessary, use electrical tape or zip ties to secure any loose sections or reinforce seams. This step ensures that the insulation provides maximum energy efficiency and has a neat, finished appearance, consistent with the completed look shown throughout the video.</video:description>
      <video:player_loc>https://www.youtube.com/embed/sf5l1ObxSJc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11461-1</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Stair Centerline — Stair Tread Installation</video:title>
      <video:description>To ensure accurate and straight placement of the anti-slip treads, use masking tape to create a guideline. Place a strip of masking tape along the front edge of the stair tread. Next, measure the total width of the stair using a measuring tape. Divide this measurement in half to find the center point. Use a pencil to mark this center point directly onto the masking tape. Repeat for each stair.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11461-2</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Anti-Slip Tread — Stair Tread Installation</video:title>
      <video:description>Before applying the anti-slip stair tread, you need to prepare it for proper alignment. On the backing side of the anti-slip tread, either measure halfway across its width and place a mark using your pencil, or simply fold the tread in half temporarily to create a slight crease in the backing paper. This mark or crease will serve as the center guide for aligning the tread with the marked centerline on your stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11461-3</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11465-1</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Stair Tread Installation</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11465-2</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — Stair Tread Installation</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11465-3</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11460-1</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — Stair Tread Installation</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11460-2</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11460-3</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11463-1</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11463-2</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Stair Tread Installation</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11463-3</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11464-1</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11464-2</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — Stair Tread Installation</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11464-3</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11462-1</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9QUWoHirsVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Review and Enjoyment — Stair Tread Installation</video:title>
      <video:description>Once all stair treads are installed, step back and visually inspect the entire staircase. Check for uniform spacing, straight alignment, and secure adhesion of all treads. Walk up and down the stairs to ensure they feel stable and comfortable. The video showcases the completed staircase with all treads installed, demonstrating the aesthetic and functional improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9QUWoHirsVE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11462-2</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11462-3</loc>
    <lastmod>2026-11-15T21:26:13.955Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Introduction and Product Overview — Stair Tread Installation</video:title>
      <video:description>The presenter introduces Oak Valley Designs&apos; Bullnose Carpet Stair Treads, explaining their key features. These treads are manufactured in North Georgia and feature a triple-reinforced, rounded front edge designed to give the staircase the look and safety of a traditional runner. They come with a built-in pad and a pressure-sensitive adhesive with a peel-and-release liner on the back, making installation super easy and non-damaging to wooden steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-11-15T21:26:13.955Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11450-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tlxs-sB41q0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear and Sweep the Deck — Deck Cleaning</video:title>
      <video:description>Before starting any preparation, remove any items from the deck, such as potted plants and furniture. Once the deck is clear, use an outdoor broom to sweep away any loose dirt, leaves, or debris from the surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tlxs-sB41q0</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11450-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GPbRQ5cHYew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear the Deck — Deck Cleaning</video:title>
      <video:description>Before beginning the cleaning process, ensure the deck is completely clear of all items. This includes furniture like chairs and tables, any children&apos;s toys from the deck surface, and any items stored underneath the deck. This step ensures an unobstructed work area for effective cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GPbRQ5cHYew</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11450-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vIE-iAxRoD4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear the Deck — Deck Cleaning</video:title>
      <video:description>Before beginning any cleaning or staining, remove all furniture, planters, decorations, and any other items from your deck surface. This provides a clear and blank work area, making the subsequent steps much easier and more efficient.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vIE-iAxRoD4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11451-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RBkvBL_iiGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sweep the Deck Clean — Deck Cleaning</video:title>
      <video:description>Before applying any liquids, use a broom to thoroughly sweep off the entire deck surface. This step is crucial for removing any loose dust, dirt, leaves, or other debris that may have accumulated. This applies to both older decks and brand new decks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RBkvBL_iiGk</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11451-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rnepW1qumvg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sweep Deck Thoroughly — Deck Cleaning</video:title>
      <video:description>Using a push broom, thoroughly sweep the entire deck surface to remove any loose debris, such as leaves, dirt, twigs, and cobwebs. This prepares the deck for the more intensive cleaning steps and ensures that no abrasive particles scratch the wood during subsequent processes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rnepW1qumvg</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11451-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gUr6kIRUi-k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sweep the Deck — Deck Cleaning</video:title>
      <video:description>The first step is to thoroughly sweep the entire deck surface to remove any loose debris such as leaves, dirt, and small sticks. The presenter suggests using a wide broom and sweeping in the direction of the deck boards to efficiently clear the surface without forcing debris across grooves.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gUr6kIRUi-k</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11452-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UTFbaNuTQKk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse the Deck — Deck Cleaning</video:title>
      <video:description>After scrubbing the deck with the cleaning solution, thoroughly rinse the entire deck surface. You can use a standard garden hose for this, or for a more powerful rinse, a pressure washer. If using a pressure washer, proceed to the next step for important tips and techniques to avoid damaging the wood.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UTFbaNuTQKk</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11452-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RBkvBL_iiGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Hose Down Your Deck — Deck Cleaning</video:title>
      <video:description>After sweeping, use a garden hose to thoroughly spray down the entire deck surface. This pre-wetting helps to loosen stubborn dirt and prepares the wood for the cleaner application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RBkvBL_iiGk</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11452-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Endync6z3XM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Deck — Deck Cleaning</video:title>
      <video:description>Begin by assessing the deck&apos;s condition. The video demonstrates using a pump sprayer, which is preferred over a power washer to avoid damaging wood fibers. Pour a biodegradable wood cleaner into the pump sprayer, mixing it with water in a one-to-one (1:1) ratio. Before applying the cleaner, thoroughly spray the entire deck with cool, clear water using a garden hose. Then, apply the mixed cleaner evenly across the wet deck using the pump sprayer. Allow the cleaner to sit for about 10 minutes to penetrate the dirt and grime. After letting it sit, use a stiff bristle brush to scrub the deck, working the cleaner into the wood and dislodging any remaining dirt or algae. Finally, rinse the deck thoroughly with the garden hose to remove all cleaner and loosened debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Endync6z3XM</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11453-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rnepW1qumvg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Your Deck Thoroughly — Deck Cleaning</video:title>
      <video:description>Thoroughly clean the deck using a deck cleaner. First, wet the deck surface with a hose. Then, apply the deck cleaner according to the product instructions. Use a stiff-bristled scrub brush to scrub the entire deck, paying attention to areas with grime, mildew, or old stain residue. Finally, rinse the deck thoroughly with water, making sure to remove all cleaner residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rnepW1qumvg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11453-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Endync6z3XM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Deck — Deck Cleaning</video:title>
      <video:description>Begin by assessing the deck&apos;s condition. The video demonstrates using a pump sprayer, which is preferred over a power washer to avoid damaging wood fibers. Pour a biodegradable wood cleaner into the pump sprayer, mixing it with water in a one-to-one (1:1) ratio. Before applying the cleaner, thoroughly spray the entire deck with cool, clear water using a garden hose. Then, apply the mixed cleaner evenly across the wet deck using the pump sprayer. Allow the cleaner to sit for about 10 minutes to penetrate the dirt and grime. After letting it sit, use a stiff bristle brush to scrub the deck, working the cleaner into the wood and dislodging any remaining dirt or algae. Finally, rinse the deck thoroughly with the garden hose to remove all cleaner and loosened debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Endync6z3XM</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11453-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cUubqv3iLg4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply and Rinse Deck Cleaner — Deck Cleaning</video:title>
      <video:description>After sweeping, prepare your chosen commercial deck cleaner by filling a pump sprayer according to product instructions. Liberally apply the cleaner to all wood surfaces that you intend to treat, including the deck floor and both the inside and outside surfaces of the wood railings. Allow the cleaner to sit and penetrate the wood for approximately 10 minutes, or as directed by the product&apos;s instructions. Following the dwell time, rinse the cleaner off with cold water using a garden hose equipped with a nozzle. For heavily soiled areas or stubborn stains, you may opt to repeat the cleaning process, this time using a scrub brush to agitate the cleaner before rinsing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cUubqv3iLg4</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11454-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RBkvBL_iiGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wait and Scrub the Deck — Deck Cleaning</video:title>
      <video:description>After applying the cleaner, wait for approximately 15 minutes to allow the cleaner to penetrate the wood and begin breaking down dirt and grime. Following the waiting period, use a stiff-bristle brush to vigorously scrub the deck clean, always moving in the direction of the wood grain. If you notice bubbles forming, it indicates that the cleaner is actively working.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RBkvBL_iiGk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11454-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q9xEMbly_JE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub and Rinse the Deck — Deck Cleaning</video:title>
      <video:description>After applying the cleaner, use a clean broom or a stiff brush to agitate the surface of the wood. Scrub vigorously to work the cleaner into the grain and remove dirt, mold, and mildew. Pay extra attention to any heavily stained areas, such as those left by leaf piles. Once scrubbing is complete, thoroughly rinse the entire deck surface with the garden hose until all cleaner residue and loosened debris are washed away.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q9xEMbly_JE</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11454-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Es_Xjo7T750/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub the Deck — Deck Cleaning</video:title>
      <video:description>After applying the cleaner, use a professional-grade floor scrubber with rotating brushes to thoroughly scrub the deck surface. As the scrubber operates, water is simultaneously sprayed onto the deck to aid in the scrubbing process and rinse away loosened dirt and grime. Move the scrubber systematically across the deck, ensuring every board is cleaned to remove stubborn dirt, mildew, and old finishes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Es_Xjo7T750</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11455-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UTFbaNuTQKk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse the Deck — Deck Cleaning</video:title>
      <video:description>After scrubbing the deck with the cleaning solution, thoroughly rinse the entire deck surface. You can use a standard garden hose for this, or for a more powerful rinse, a pressure washer. If using a pressure washer, proceed to the next step for important tips and techniques to avoid damaging the wood.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UTFbaNuTQKk</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11455-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rJ9xi-K2g0s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse the Deck — Deck Cleaning</video:title>
      <video:description>To remove the cleaner and the dislodged dirt, thoroughly rinse the decking. A pressure washer is recommended for optimal results, as it provides strong, consistent water flow to flush away all residue. If a pressure washer is not available, a garden hose with a nozzle can also be used effectively. When rinsing, work from one end of the deck to the other in a continuous, overlapping motion to ensure complete removal of the cleaner and prevent any streaking or residue buildup.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rJ9xi-K2g0s</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11455-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8fNyqcISlwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse Off Solution — Deck Cleaning</video:title>
      <video:description>Once the solution has had sufficient dwell time, thoroughly rinse off the entire deck surface using a high-pressure garden hose. Ensure all cleaning solution, loosened dirt, and grime are completely removed from the timber. If you are using a high-pressure cleaner (pressure washer), always use it on the lowest pressure setting. Maintain a safe distance between the nozzle and the timber to avoid damaging the wood fibers, which can lead to splintering and an uneven surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8fNyqcISlwE</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11456-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UTFbaNuTQKk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Treating Specific Stains (Mold, Mildew, Nail Stains) — Deck Cleaning</video:title>
      <video:description>Different wood species require varying types of care. It&apos;s always best practice to consult the industry association website specific to the wood species your deck is made from for tailored advice. Mold and mildew can manifest as dark spots or dark gray, fan-shaped spots. In severe cases, an area may appear uniformly gray or black. To clean these specific spots, you can try using a mild household detergent mixed with warm water and then scrubbing the affected areas to see if the stain can be removed. This same method is also effective for treating unsightly nail stains that may appear on your deck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UTFbaNuTQKk</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11456-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/30XEG_kF_wA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub Wood with Cleaner and Rinse — Deck Cleaning</video:title>
      <video:description>Once the cleaner is applied, use a stiff-bristled brush or deck brush to thoroughly scrub the entire wood surface. Work with the grain of the wood to lift embedded dirt, grime, and mildew. After scrubbing, immediately rinse the area thoroughly with a garden hose or pressure washer to remove all cleaning solution and loosened contaminants. Continue working in sections, applying cleaner, scrubbing, and rinsing, ensuring no cleaner dries on the wood.</video:description>
      <video:player_loc>https://www.youtube.com/embed/30XEG_kF_wA</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11456-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pmw-n86WoxM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Scrub with a Brush — Deck Cleaning</video:title>
      <video:description>While the cleaning solution is still wet and active on the deck surfaces, use a stiff-bristle deck brush to vigorously scrub all wood components. This includes the main deck planks, handrails, and balusters. The mechanical action of scrubbing helps to agitate and dislodge deeply embedded dirt, stubborn mildew, and pervasive algae that the chemical solution has loosened. Focus particular effort on areas that appear most severely soiled or have persistent green or black patches. Ensure you scrub with the grain of the wood to maximize cleaning effectiveness and prevent accidental damage to the wood fibers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pmw-n86WoxM</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11457-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jBXnfLe3lzs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Deck to Dry Completely — Deck Cleaning</video:title>
      <video:description>After the cleaning and rinsing steps, allow the deck to dry completely. This typically takes a minimum of two days, depending on weather conditions, to ensure the wood is thoroughly dry before any further preparation or staining.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jBXnfLe3lzs</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11457-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RBkvBL_iiGk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Let the Deck Dry — Deck Cleaning</video:title>
      <video:description>After cleaning and rinsing, the deck must be allowed to dry completely before any staining or sealing can begin. It is generally recommended to wait at least 24 hours for the deck to air dry, or follow the specific drying instructions provided by the stain manufacturer, to ensure optimal results.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RBkvBL_iiGk</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11457-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rJ9xi-K2g0s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Deck to Dry Completely — Deck Cleaning</video:title>
      <video:description>After the deck has been thoroughly rinsed, it is crucial to allow it to dry completely before proceeding with any further treatments like staining or sealing. This process typically requires &apos;a few days&apos; of dry weather, as indicated in the video. The deck must be bone dry to ensure proper adhesion and longevity of any subsequent finishes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rJ9xi-K2g0s</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11458-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GID4f0QAWMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Protecting the Deck with Stain and Sealer — Deck Cleaning</video:title>
      <video:description>The final step in completing your new deck is to properly protect it from the elements. Apply a combination stain and sealant product to the entire wooden surface of the deck. This type of product not only enhances the wood&apos;s natural grain and beauty but also provides crucial protection against damage from sun and rain. Use a paintbrush for edges and hard-to-reach areas, and a paint roller for broader surfaces to ensure even coverage. This protective layer will extend the life of your deck and reduce the frequency of maintenance. The video shows a person using an Olympic Elite Advanced Stain + Sealant in One product, applying it with a paintbrush and then a roller.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GID4f0QAWMw</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11458-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oMY2KaE_Rlg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Stain and Seal Deck Surface and Stairs — Deck Cleaning</video:title>
      <video:description>Once the railings are complete, proceed to stain and seal the main deck surface and stairs. Use a paint roller for broad, flat areas of the deck to ensure quick and even coverage. For the narrow gaps between the deck boards, use a brush to push the stain into the crevices, ensuring thorough protection and a consistent finish. Work in small sections, perhaps two deck boards at a time, allowing for careful application and avoiding missed spots. The presenter emphasizes the importance of applying the product evenly and allowing sufficient drying time, suggesting at least a day or 48 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oMY2KaE_Rlg</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11458-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HdQlYnQedAQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Second Coat of Deck Stain — Deck Cleaning</video:title>
      <video:description>After the first coat of stain has dried according to the manufacturer&apos;s recommendations (usually 4-24 hours), apply a second coat using the same brushing and rolling technique. Ensure even coverage to build up the color and protection. Allow the second coat to dry completely before walking on the deck or placing furniture.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HdQlYnQedAQ</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11459-1</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rnepW1qumvg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Enjoy Your Stained Deck — Deck Cleaning</video:title>
      <video:description>After the stain has completely dried and cured, you can finally replace all your furniture, plants, and decorations. The deck is now refreshed, protected, and ready to be enjoyed, showcasing the enhanced natural beauty of the wood.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rnepW1qumvg</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11459-2</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zILUo5L-JZA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Furniture and Enjoy — Deck Cleaning</video:title>
      <video:description>After applying the stain, allow the deck to dry completely. The video suggests waiting until the next day before returning any furniture to the deck. Once the stain has cured, replace your outdoor furniture and accessories. The final step is to simply relax and enjoy your beautifully refreshed outdoor oasis.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zILUo5L-JZA</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11459-3</loc>
    <lastmod>2026-10-22T14:26:14.930Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GPbRQ5cHYew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Drying and Curing — Deck Cleaning</video:title>
      <video:description>After the sealer has been applied to the entire deck, allow it to dry and cure fully according to the manufacturer&apos;s recommendations, which typically requires 24 hours. During this period, avoid walking on the deck or placing any items back onto it to ensure the sealer adheres properly and cures without interruption. Once the curing time is complete, the deck will be ready for regular use, and furniture can be returned.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GPbRQ5cHYew</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-10-22T14:26:14.930Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11434-1</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mbvJJJI9boQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Need &amp; Prioritize Safety — Solar Panel Cleaning</video:title>
      <video:description>Before any physical work begins, assess whether your panels actually need cleaning. If panels are not visually filthy, cleaning may not be necessary. In some areas, panels can self-clean, requiring inspection only every three years. However, in particularly dirty areas or if you have issues with pigeons or possums, annual cleaning and inspection might be needed. Crucially, before getting on the roof, *always* turn your solar system off. Even with the system off, the cables on the roof will still be live, so proceed with extreme caution. When accessing the roof, take your time, ensure your ladder is securely tied off (e.g., with a LOCK JAW Ladder Grip), and ideally use a safety harness for fall protection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mbvJJJI9boQ</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11434-2</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0KX5F7Si-TY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Panel Dirtiness — Solar Panel Cleaning</video:title>
      <video:description>Access the rooftop where the solar panels are installed. Visually inspect the panels to assess the level of dirt accumulation, dust, and any cobwebs. The video demonstrates that the panels are not &apos;absolutely filthy&apos; but show a fine layer of dust. Notice how the top sections might appear cleaner, while the bottom edges tend to collect more grime as rainwater runs off, leaving behind debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0KX5F7Si-TY</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11434-3</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/pmWlvUWkeQo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visual Assessment of the Array (Modules, Wiring, Mounting) — Solar Panel Cleaning</video:title>
      <video:description>Perform a thorough visual inspection of the solar array itself. This involves walking down each row (or every other row depending on configuration) to check both the faces of the modules and underneath them. Look for any damage to modules or wiring caused by vermin or weather. Inspect wire management for frayed wires or unsecured cabling. Ground connections should be checked for loose bolts, nuts, and connectors. Examine mounting systems, module frames, and enclosures for signs of corrosion. Look for blackened or burnt-out cells on modules and assess for dirt or dust accumulation, especially areas where static charge might be leaking voltage. For roof-mounted systems, remove wind deflectors to inspect underneath modules for issues. For ground-mounted systems, check for erosion, excessive vegetation growth around the array, and any corrosion or damage to the mounting structure. For roof-mounted systems, specifically look for algae, water damming, dirt collection, or vegetation growth on the roof surface under the modules. For attached systems (e.g., conduit and wiring on a roof), check for cracks in rubber boots and inspect junction boxes (J-boxes). If necessary, open J-boxes to check internal connections, look for water or vermin intrusion, loose connections, broken terminal blocks, soot marks, or any burning smells. Throughout this process, take numerous pictures and meticulously fill out the field report to document all observations and potential issues.</video:description>
      <video:player_loc>https://www.youtube.com/embed/pmWlvUWkeQo</video:player_loc>
      <video:duration>127</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11435-1</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ewukiBi4l78/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the solar panels — Solar Panel Cleaning</video:title>
      <video:description>To begin, ensure the solar panels are clean, as deposits of impurities and dust can significantly reduce their power generation. Once a month, clean the photovoltaic modules by removing dust and other deposits from the surface. Use a soft, clean cloth dampened with clean water for this task. Gently wipe the entire surface of the panel to ensure maximum light absorption.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ewukiBi4l78</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11435-2</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mbvJJJI9boQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Panels Correctly — Solar Panel Cleaning</video:title>
      <video:description>Once on the roof and safety measures are in place, begin the cleaning process. **Do not walk on solar panels**, as this can cause microcracks not covered by manufacturer warranties. Avoid using scourers or harsh chemicals, as they can scratch the anti-reflective coating on the panels. Also, **do not use a pressure cleaner**. Instead, use a regular garden hose and a soft bristle brush. If there are stubborn stains, such as bat droppings, wet an old rag and place it over the affected area for about half an hour to soften the grime. Afterward, you should be able to easily wash it off with the soft bristle brush and hose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mbvJJJI9boQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11435-3</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mrM2UkTVpoU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Solar Panels with Brush and Water — Solar Panel Cleaning</video:title>
      <video:description>The video shows a close-up of a long-handled brush with a water spray attachment being used to scrub the solar panels. The process involves systematically brushing the surface of each panel while simultaneously rinsing away loosened dirt and debris with water. This action ensures thorough cleaning without leaving water spots.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mrM2UkTVpoU</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11436-1</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8QlZXbbhF-8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Water Spray to Panels — Solar Panel Cleaning</video:title>
      <video:description>A focused stream of water from a hose or spray device is directed onto the top portion of the heavily soiled solar panels. The water immediately begins to dislodge and wash away the thick layer of mud, creating a clear contrast between the dirty and newly cleaned sections of the panels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8QlZXbbhF-8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11436-2</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8QlZXbbhF-8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Completion — Solar Panel Cleaning</video:title>
      <video:description>At the end of the video, a large section of the solar panels that was initially caked in mud is now visibly clean and reflective. The water spray has effectively removed the heavy layer of dirt, restoring the panels to a state where they can efficiently absorb sunlight. The cleaning process, relying solely on water, appears successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8QlZXbbhF-8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11436-3</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mbvJJJI9boQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Panels Correctly — Solar Panel Cleaning</video:title>
      <video:description>Once on the roof and safety measures are in place, begin the cleaning process. **Do not walk on solar panels**, as this can cause microcracks not covered by manufacturer warranties. Avoid using scourers or harsh chemicals, as they can scratch the anti-reflective coating on the panels. Also, **do not use a pressure cleaner**. Instead, use a regular garden hose and a soft bristle brush. If there are stubborn stains, such as bat droppings, wet an old rag and place it over the affected area for about half an hour to soften the grime. Afterward, you should be able to easily wash it off with the soft bristle brush and hose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mbvJJJI9boQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11437-1</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mbvJJJI9boQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Panels Correctly — Solar Panel Cleaning</video:title>
      <video:description>Once on the roof and safety measures are in place, begin the cleaning process. **Do not walk on solar panels**, as this can cause microcracks not covered by manufacturer warranties. Avoid using scourers or harsh chemicals, as they can scratch the anti-reflective coating on the panels. Also, **do not use a pressure cleaner**. Instead, use a regular garden hose and a soft bristle brush. If there are stubborn stains, such as bat droppings, wet an old rag and place it over the affected area for about half an hour to soften the grime. Afterward, you should be able to easily wash it off with the soft bristle brush and hose.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mbvJJJI9boQ</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11437-2</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mrM2UkTVpoU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Solar Panels with Brush and Water — Solar Panel Cleaning</video:title>
      <video:description>The video shows a close-up of a long-handled brush with a water spray attachment being used to scrub the solar panels. The process involves systematically brushing the surface of each panel while simultaneously rinsing away loosened dirt and debris with water. This action ensures thorough cleaning without leaving water spots.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mrM2UkTVpoU</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11437-3</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/RvC9DM9VlHI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Manually Scrub Interior Greenhouse Panels — Solar Panel Cleaning</video:title>
      <video:description>Prepare a bucket with a cleaning solution (implied soap or detergent). Dip a long-handled brush or mop into the solution. Manually scrub the interior plastic panels of the greenhouse walls, particularly areas that may have residual shade paint or general grime. This manual scrubbing helps to dislodge stubborn dirt that might not be reached by external pressure washing or for interior-specific cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/RvC9DM9VlHI</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11438-1</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gnx3FeVNoxU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Rinse — Solar Panel Cleaning</video:title>
      <video:description>Conclude the cleaning process with a thorough final rinse of the entire vehicle, including the engine bay, undercarriage, and all exterior panels. Use a pressure washer or a strong hose stream to ensure all soap residue and remaining dirt are completely flushed away. Start from the top and work your way down, allowing gravity to assist in carrying contaminants off the vehicle. Pay special attention to hidden areas in the engine bay and undercarriage where soap or dirt might accumulate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gnx3FeVNoxU</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11438-2</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Z9H0TnvOcSQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse Thoroughly — Solar Panel Cleaning</video:title>
      <video:description>Once the entire glass surface has been thoroughly scrubbed and the dirt has been loosened, use a garden hose to rinse away all the cleaning solution and dislodged debris. Systematically spray the table from top to bottom, ensuring no soap residue or grime is left behind. Continue rinsing until the water runs clear and the glass surface is sparkling clean and free of streaks. The table is now restored to its clean state.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Z9H0TnvOcSQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11438-3</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kBzLniBwvFs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse Off Soap and Foam — Solar Panel Cleaning</video:title>
      <video:description>After hand washing, thoroughly rinse all soap and foam from the vehicle using the pressure washer. Start from the top and work downwards, ensuring no soap residue is left behind in crevices or panel gaps. A clean rinse is crucial to prevent water spots and streaks once the vehicle dries. The video shows a continuous rinse, including opening parts of the vehicle to access hidden areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kBzLniBwvFs</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11439-1</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8QlZXbbhF-8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Completion — Solar Panel Cleaning</video:title>
      <video:description>At the end of the video, a large section of the solar panels that was initially caked in mud is now visibly clean and reflective. The water spray has effectively removed the heavy layer of dirt, restoring the panels to a state where they can efficiently absorb sunlight. The cleaning process, relying solely on water, appears successful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8QlZXbbhF-8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11439-2</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/X-hZM-nqfBA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Rinse and Drying — Solar Panel Cleaning</video:title>
      <video:description>Once all panels have been hand-washed, the vehicle is given a final thorough rinse with the garden hose to remove all remaining soap suds and loosened debris. The rinsing should again be performed from top to bottom to ensure a streak-free finish. Immediately after rinsing, a clean, dry, and plush microfiber drying towel is used to gently wipe down the entire vehicle, including mirrors and taillights, to prevent water spots and reveal the clean, decontaminated paintwork.</video:description>
      <video:player_loc>https://www.youtube.com/embed/X-hZM-nqfBA</video:player_loc>
      <video:duration>85</video:duration>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11439-3</loc>
    <lastmod>2026-10-21T14:23:31.451Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HmMzR9MZX9U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Finish — Solar Panel Cleaning</video:title>
      <video:description>After squeegeeing the entire surface of the skylight, perform a final inspection for any remaining streaks, smudges, or missed spots. Use a clean, dry microfiber cloth to wipe away any excess water or solution that may have collected along the edges and frame of the skylight. Carefully buff out any minor streaks on the glass for a perfect finish. Also, ensure the surrounding roof area is clean of any cleaning solution residue. It&apos;s often best to clean skylights on a cloudy day or early morning/late afternoon to avoid the sun drying the solution too quickly and causing streaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HmMzR9MZX9U</video:player_loc>
      <video:publication_date>2026-10-21T14:23:31.451Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11433-1</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — staircase measurement</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11433-2</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — staircase measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11433-3</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — staircase measurement</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11430-1</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — staircase measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11430-2</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — staircase measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11430-3</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — staircase measurement</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11431-1</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — staircase measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11431-2</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — staircase measurement</video:title>
      <video:description>Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11431-3</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — staircase measurement</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11432-1</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — staircase measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11432-2</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — staircase measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11432-3</loc>
    <lastmod>2026-10-21T01:17:46.127Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — staircase measurement</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-21T01:17:46.127Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11426-1</loc>
    <lastmod>2026-10-28T17:18:13.502Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EJ4JekN2j_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Room and Order Carpet Squares — Stair Treads</video:title>
      <video:description>The first essential step is to accurately measure the area of the room or space where the carpet squares will be installed. Once measurements are taken, order the appropriate number of carpet squares. It is highly recommended to order approximately 10% more tiles than calculated to account for any miscuts, future replacements, or unforeseen issues during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EJ4JekN2j_g</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-28T17:18:13.502Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11426-2</loc>
    <lastmod>2026-10-28T17:18:13.502Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/afrUJ1YBtdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Flooring Material Needs — Stair Treads</video:title>
      <video:description>Begin by determining the amount of new flooring and materials needed. Measure the room&apos;s length and multiply it by its width to calculate the total square footage. To account for potential mistakes, warped boards, and cuts, add an additional 10% to your calculated square footage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/afrUJ1YBtdE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-28T17:18:13.502Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11426-3</loc>
    <lastmod>2026-10-28T17:18:13.502Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IJwbac-AflM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Waste Percentage — Stair Treads</video:title>
      <video:description>A common mistake people make is not accounting for waste. For flooring projects, it&apos;s essential to add an additional 10% to your total calculated square footage. This extra material covers cuts, potential mistakes, dropped or damaged pieces, and defective material. To calculate 10% of your total (148 sq ft in this example), multiply 148 by 0.10, which equals 14.8 sq ft. Alternatively, a quick trick is to move the decimal point one place to the left (148.0 becomes 14.8).</video:description>
      <video:player_loc>https://www.youtube.com/embed/IJwbac-AflM</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-10-28T17:18:13.502Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11427-1</loc>
    <lastmod>2026-10-28T17:18:13.502Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Treads</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-28T17:18:13.502Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11427-2</loc>
    <lastmod>2026-10-28T17:18:13.502Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-28T17:18:13.502Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11427-3</loc>
    <lastmod>2026-10-28T17:18:13.502Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Stair Treads</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-28T17:18:13.502Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11428-1</loc>
    <lastmod>2026-10-28T17:18:13.502Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Stair Treads</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-28T17:18:13.502Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11428-2</loc>
    <lastmod>2026-10-28T17:18:13.502Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c7jak2TlfDA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure the Bullnose Stair — Stair Treads</video:title>
      <video:description>Begin by measuring the total length and width of the bullnose stair. First, measure from the inside corner of the wall around the bullnose curve to the outer corner, bending the tape measure around the nose. This measurement is 28 inches. Next, measure the length of the entire stair, wrapping the tape measure along the base where the carpet will be installed. This measurement is 57 inches. Finally, measure the width of the stair tread, which is 29 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c7jak2TlfDA</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-10-28T17:18:13.502Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11428-3</loc>
    <lastmod>2026-10-28T17:18:13.502Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Treads</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-28T17:18:13.502Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11415-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cxkyDByk8-Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place Indoor Test Kits — Mold Testing Kit</video:title>
      <video:description>Select several locations within your home to place the mold test kits. The video shows examples of placing kits on a bathroom counter and a bedroom nightstand. For each location, open a petri dish and expose the growth medium to the air for the duration specified in the kit&apos;s instructions (typically 30 minutes to 1 hour) to collect airborne mold spores. After the sampling period, securely close the petri dish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cxkyDByk8-Q</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11415-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3o6y-6Dr6Ms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Ambient Air Culture Plate (DIY Visual Check) — Mold Testing Kit</video:title>
      <video:description>For ambient air sampling, a pre-filled agar plate is used. The host explains that this type of plate is designed to be simply opened and left exposed in the desired location for a specified duration, typically one hour. During this time, airborne mold spores will settle onto the agar surface. She mentions having previously used this method in her basement for assessment. After exposure, the plate is sealed and incubated for mold growth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3o6y-6Dr6Ms</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11415-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3o6y-6Dr6Ms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Conduct Rapid Mold Test (Swab &amp; Strips) — Mold Testing Kit</video:title>
      <video:description>The host demonstrates the use of a rapid mold test kit (Healthful Home branded). She takes a cotton swab from the kit, which has previously been used to collect a mold sample (shown in a pre-recorded clip at 2:27). This swab is then inserted into a vial containing a solution. A plunger is depressed to release the solution into the swab, and the vial is vigorously shaken for 10 seconds to ensure the mold particles mix thoroughly with the liquid. Finally, five drops of the prepared solution are dispensed into small wells on two separate test strips, one for &apos;Asp/Pen&apos; (Aspergillus/Penicillium) and the other for &apos;Stachybotrys&apos; mold species. Results appear within 10-15 minutes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3o6y-6Dr6Ms</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11416-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3o6y-6Dr6Ms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inoculate and Package Culture Plate (For Lab Analysis) — Mold Testing Kit</video:title>
      <video:description>After collecting the mold sample on a cotton swab (from Step 5), the host takes the swab and gently rubs it across the surface of the agar gel in the Petri dish that was prepared earlier (in Step 2). This action transfers the collected mold spores onto the growth medium. Once inoculated, the Petri dish is sealed securely with tape to prevent external contamination and to keep it closed during transport. The sealed Petri dish is then placed into a business reply envelope provided with the kit, ready to be mailed to a laboratory for detailed species identification and concentration assessment. Lab payment is typically completed online.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3o6y-6Dr6Ms</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11416-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nwLI8zU8rKg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure the Sample in the Sterile Tube — Mold Testing Kit</video:title>
      <video:description>After collecting the sample on the swab tip, carefully break the seal on the swab tube. It is crucial to perform this action without touching the white fabric tip of the swab or allowing the swab to come into contact with any other surfaces to avoid contamination. Discard the swab tube cap, and then firmly place the swab, tip first, into the sterile tube.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nwLI8zU8rKg</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11416-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ecpe463Byrc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Collect Sample with Tape Lift Kit — Mold Testing Kit</video:title>
      <video:description>If using a tape lift kit, which is generally considered easier to use and less prone to error than a swab, begin by taking the small hard case. If collecting multiple samples, use a permanent marker to label the case clearly with the sample location (e.g., &apos;Bedroom Wall&apos;). Open the case to expose the double-sided adhesive tape. Press the adhesive side firmly onto the suspected mold growth area on a surface like drywall, then lift it off. Close the case securely to protect the sample. This sample, along with a completed custody sheet (provided with the kit), will be sent to the lab.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ecpe463Byrc</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11417-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/klcY5n41pjM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Instruction Sheet and Obtain PIN — Mold Testing Kit</video:title>
      <video:description>After registering your kit, fill in the date and time of sampling and a brief sample description (e.g., &apos;Asbestos ceiling and flooring tests&apos;). The system will then generate a unique PIN number for your kit. This PIN number must be accurately written on the instruction sheet included in your kit. Fill out all remaining required fields on the physical instruction sheet, including your name, state of sample collection, where the kit was purchased, and any special instructions corresponding to your samples (e.g., &apos;Sample 1 - popcorn ceiling&apos;, &apos;Sample 2 - flooring&apos;).</video:description>
      <video:player_loc>https://www.youtube.com/embed/klcY5n41pjM</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11417-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ecpe463Byrc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Sampling Locations and Submit to Lab — Mold Testing Kit</video:title>
      <video:description>After collecting your samples using either the tape lift or sterile swab method, you&apos;ll need to submit them for professional analysis. Several common areas for mold growth that you might consider testing include: around baseboards, on heating and air conditioning (HVAC) vents or registers, return air grilles (where dust often accumulates), around the toilet or under sinks in bathrooms (ensure surfaces are dry before sampling, not right after a shower), the joists or subfloor in a crawl space, and the trusses in an attic (especially if there&apos;s been a roof leak). Once all samples are properly packaged in their respective bags and the custody sheet is filled out with all necessary information (including sample locations), mail them to the Assured Bio Labs. The lab will then email you the results, identifying the types of mold found and their concentrations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ecpe463Byrc</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11417-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N9AwxmFxBwg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Submission Form — Mold Testing Kit</video:title>
      <video:description>After packaging your soil sample, accurately and completely fill out the provided submission form. This form typically asks for grower information, commercial representative details, sample origin, and crop information. Make sure all fields are correctly completed. Always retain a copy of the filled-out form for your personal records, as it contains important information regarding your sample and potential results.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N9AwxmFxBwg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11418-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Xd4dZRslIhA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Register, Pay, and Mail Samples — Mold Testing Kit</video:title>
      <video:description>With the samples collected, the presenter moves to the final steps of preparing them for lab analysis. He reviews the &apos;Mail-In Registration &amp; Payment Form&apos;, carefully filling out his personal information and selecting the type of samples. He applies the provided &apos;Test Kit Identification&apos; stickers to both the registration form and the corresponding sample bags. He then pays the $40 lab fee online (which covers two samples at $20 each). Finally, he places the completed registration form and the two sealed sample bags into the &apos;First-Class PKG Return Service&apos; mailer envelope. The presenter then travels to the post office and deposits the mailer, emphasizing the &apos;Time Sensitive Material&apos; requirement for mailing within 24 hours.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Xd4dZRslIhA</video:player_loc>
      <video:duration>70</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11418-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2E30MpLogjg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cap Vials and Prepare for Mailing — Mold Testing Kit</video:title>
      <video:description>Once the designated testing period has elapsed (between 48 and 96 hours), retrieve the test vials. Immediately put the caps back onto both test vials securely. Then, meticulously fill out the provided data card with all necessary information, including your contact details, test location, and the start/end times of the test. Complete any payment forms or enclose payment if required by the lab. Finally, place both capped test vials, the filled-out data card, and any payment information into the pre-addressed envelope.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2E30MpLogjg</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11418-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/g_DI3_LmY5k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Submit Samples for Lab Testing — Mold Testing Kit</video:title>
      <video:description>Place the double-bagged and labeled samples into the provided padded pre-paid envelope along with the submission form. Ensure the reference number obtained during online registration is clearly noted on the form. Mail the envelope according to the kit&apos;s instructions. The presenter sent his samples on April 11th and received results via email on April 17th.</video:description>
      <video:player_loc>https://www.youtube.com/embed/g_DI3_LmY5k</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11419-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cxkyDByk8-Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Interpret Results and Consider Professional Advice — Mold Testing Kit</video:title>
      <video:description>Compare the growth on your indoor test dishes to your outdoor control dishes. In the video&apos;s results, the outdoor test dishes (on the right) showed significantly more and diverse mold growth compared to the indoor dishes (on the left), which had minimal to no growth. The presenter expresses doubt about the overall accuracy of these DIY kits, especially since known mold was present in the home (shown earlier). Therefore, while these kits can give a superficial indication, the key takeaway is that if you suspect a genuine mold problem, the most reliable course of action is to hire a professional mold inspector for accurate assessment and remediation advice.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cxkyDByk8-Q</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11419-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dTea1kDc3EM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Receive Results and Final Notes — Mold Testing Kit</video:title>
      <video:description>Within a few business days of submitting your samples, you can expect to receive your certified results electronically. Remember, while the kit provides materials, certified laboratory analysis, and prepaid shipping, it is your responsibility to ensure proper sample collection and correct shipping back to the lab. Thank you for taking steps to protect yourself and your family; referrals are always appreciated.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dTea1kDc3EM</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11419-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3o6y-6Dr6Ms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Interpret Culture Plate Results and Compare Methods — Mold Testing Kit</video:title>
      <video:description>The host reveals the results of the Petri dish culture plates after 72 hours of incubation (which would have been the ambient air sample from Step 3, and the surface sample from Step 5 after lab analysis, although here it is shown for direct comparison). Both the &apos;Garage&apos; and &apos;Basement&apos; labeled plates show extensive, multi-colored mold growth, indicating a significant presence of various mold species. She contrasts these results with the earlier negative rapid test, highlighting that while the rapid test gave a quick, specific (negative) answer, the culture plates clearly showed mold was present, albeit without specific species identification. The host expresses a preference for culture plates that can be sent to a lab for detailed analysis, as they offer a more definitive answer regarding the presence of mold, even if an initial visual check is inconclusive. This approach provides lab-verified results, which is more reliable than purely visual interpretation of home culture plates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3o6y-6Dr6Ms</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11412-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4jS0xOsJq0k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Mold and Prepare Work Area — Mold Testing Kit</video:title>
      <video:description>Begin by assessing all mold-affected areas on ceilings, walls, window sills, and any other surfaces. This includes identifying the extent of the mold growth and any peeling paint. Before starting any work, ensure you are wearing appropriate personal protective equipment (PPE), including a full hazmat suit, gloves, goggles, and a respirator mask, to prevent exposure to mold spores and chemicals. Prepare the work area by covering furniture and flooring with plastic sheeting to protect them from spills and falling debris. Remove any items, such as plants, from the immediate vicinity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4jS0xOsJq0k</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11412-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EHFi9-bhdM4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area with Containment — Mold Testing Kit</video:title>
      <video:description>Lay a black plastic drop sheet on the ground directly below the area of the wall or door frame that needs to be prepared. Ensure the sheet covers enough area to catch all falling debris. Secure the edges of the plastic drop sheet tightly to the surface of the wall or door frame using blue painter&apos;s tape. This creates a sealed containment area, preventing lead-contaminated debris from spreading.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EHFi9-bhdM4</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11412-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/b6ZiyfadYDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Work Area — Mold Testing Kit</video:title>
      <video:description>Before starting any work, protect your furniture and carpets by covering them completely with appropriate protective sheets or drop cloths. Ensure adequate ventilation in the room by keeping windows and doors fully open. This is crucial for both safety during application and proper drying of the product.</video:description>
      <video:player_loc>https://www.youtube.com/embed/b6ZiyfadYDQ</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11413-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LqQi5rhyfMs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Don Personal Protective Equipment (PPE) — Mold Testing Kit</video:title>
      <video:description>Before disturbing any mold, don appropriate personal protective equipment (PPE) to minimize exposure to spores. This includes a full-coverage Tyvek coverall, safety glasses, and a respirator equipped with particulate filters (and optionally, charcoal filters for odor).</video:description>
      <video:player_loc>https://www.youtube.com/embed/LqQi5rhyfMs</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11413-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3o6y-6Dr6Ms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Collect Physical Surface Mold Sample (For Lab-Bound Culture) — Mold Testing Kit</video:title>
      <video:description>Wearing disposable gloves, an N95 respirator mask, and safety glasses, the host demonstrates how to collect a physical mold sample from a visible patch of mold, specifically from a shower corner. She uses a cotton swab to rub directly onto the black mold growth, transferring a sufficient amount of the mold onto the tip of the swab. This collected sample will then be transferred to a Petri dish prepared for lab submission.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3o6y-6Dr6Ms</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11413-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dTea1kDc3EM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare for Sampling (PPE &amp; Wetting) — Mold Testing Kit</video:title>
      <video:description>Before collecting your asbestos sample, prioritize safety. First, put on your disposable latex non-powdered gloves to protect your hands from direct contact with the material. Next, securely put on your respirator or filter mask to prevent inhalation of any potentially released asbestos fibers. Once your personal protective equipment is in place, use a wet mister or a generic water sprayer to thoroughly wet the area from which you intend to collect the sample with water. This action helps to make any asbestos fibers heavier and wetter, effectively containing them and minimizing their potential release into the air during sampling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dTea1kDc3EM</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11414-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ecpe463Byrc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Collect Sample with Tape Lift Kit — Mold Testing Kit</video:title>
      <video:description>If using a tape lift kit, which is generally considered easier to use and less prone to error than a swab, begin by taking the small hard case. If collecting multiple samples, use a permanent marker to label the case clearly with the sample location (e.g., &apos;Bedroom Wall&apos;). Open the case to expose the double-sided adhesive tape. Press the adhesive side firmly onto the suspected mold growth area on a surface like drywall, then lift it off. Close the case securely to protect the sample. This sample, along with a completed custody sheet (provided with the kit), will be sent to the lab.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ecpe463Byrc</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11414-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ecpe463Byrc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Collect Sample with Sterile Swab Kit — Mold Testing Kit</video:title>
      <video:description>For the sterile swab kit, open the sterile packaging carefully, being mindful not to touch the cotton swab tip with your bare hands to avoid contamination. Hold the swab by its handle, keeping the tip sterile. Lightly rub the swab back and forth over a 1-inch (2.5 cm) area of suspected mold. Do not roll the swab, just apply a back-and-forth motion. Once the sample is collected, open the lid of the sterile case (typically a tube). Insert the swab into the case, making sure the collected sample doesn&apos;t touch the sides, and then securely close the lid. Place the sealed swab into the plastic bag provided with the kit, ready for mailing. Remember to fill out the custody sheet with the sample location.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ecpe463Byrc</video:player_loc>
      <video:duration>85</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11414-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3o6y-6Dr6Ms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Collect Physical Surface Mold Sample (For Lab-Bound Culture) — Mold Testing Kit</video:title>
      <video:description>Wearing disposable gloves, an N95 respirator mask, and safety glasses, the host demonstrates how to collect a physical mold sample from a visible patch of mold, specifically from a shower corner. She uses a cotton swab to rub directly onto the black mold growth, transferring a sufficient amount of the mold onto the tip of the swab. This collected sample will then be transferred to a Petri dish prepared for lab submission.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3o6y-6Dr6Ms</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11410-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3o6y-6Dr6Ms/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Introduction and Kit Overview — Mold Testing Kit</video:title>
      <video:description>The host begins by discussing common symptoms that might indicate mold presence in a home, such as unexplained sneezing, headaches, or musty smells, particularly in areas like basements. She then introduces three primary types of DIY mold test kits. The first is a Petri dish culture kit that requires a separate solution to be added. The second is a rapid test kit that includes a swab, a solution, and two test strips for specific mold types. The third is a pre-filled agar plate for ambient air sampling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3o6y-6Dr6Ms</video:player_loc>
      <video:duration>61</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11411-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ecpe463Byrc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Sampling Locations and Submit to Lab — Mold Testing Kit</video:title>
      <video:description>After collecting your samples using either the tape lift or sterile swab method, you&apos;ll need to submit them for professional analysis. Several common areas for mold growth that you might consider testing include: around baseboards, on heating and air conditioning (HVAC) vents or registers, return air grilles (where dust often accumulates), around the toilet or under sinks in bathrooms (ensure surfaces are dry before sampling, not right after a shower), the joists or subfloor in a crawl space, and the trusses in an attic (especially if there&apos;s been a roof leak). Once all samples are properly packaged in their respective bags and the custody sheet is filled out with all necessary information (including sample locations), mail them to the Assured Bio Labs. The lab will then email you the results, identifying the types of mold found and their concentrations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ecpe463Byrc</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11411-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rSSgz5yykmA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect for Visible Signs of Damage — Mold Testing Kit</video:title>
      <video:description>Begin by visually inspecting the areas where you suspect a problem. In this case, mold is visible on the wall behind a vanity and has grown more extensively inside the vanity cabinet, indicating a persistent moisture issue in that location.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rSSgz5yykmA</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11411-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/XpJ1-3zt2Mk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect for Signs of Mold Growth — Mold Testing Kit</video:title>
      <video:description>Once the carpet is lifted, closely examine the exposed carpet padding, the wooden tack strips, and the subfloor (the floor directly beneath the padding). Look for any visual indicators of mold, such as black, green, brown, or pinkish discoloration. The video clearly shows dark, splotchy discoloration on the wooden tack strips, indicating significant mold growth. Also, pay attention to any musty or earthy odors, which are classic signs of mold.</video:description>
      <video:player_loc>https://www.youtube.com/embed/XpJ1-3zt2Mk</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11404-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i0aWZBW2uWs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access the Air Filter Housing — Engine Air Filter Replacement</video:title>
      <video:description>Begin by opening the car&apos;s hood. Identify the engine air filter housing, which is usually a prominent black plastic box situated near the engine. Carefully unsnap or unclip any latches or fasteners holding the cover of this housing in place. These latches are typically found on the sides of the air filter housing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i0aWZBW2uWs</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11404-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1SWUI8w5JIo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Engine Air Filter Box — Engine Air Filter Replacement</video:title>
      <video:description>Begin by accessing the engine bay. The engine air filter is located within a large black plastic box on the passenger side of the engine compartment. Identify the clips securing the air filter box cover. Use a flathead screwdriver or a similar tool to gently lift the center of the main push-pin clip located on the top of the air filter box, then pull the entire clip out to release it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1SWUI8w5JIo</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11404-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_wEdt06Tma8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Engine Air Filter — Engine Air Filter Replacement</video:title>
      <video:description>Next, locate the engine air filter housing on the driver&apos;s side of the engine bay. The housing cover is secured by several Torx screws. Use a T25 Torx bit (as shown in the video) with a wrench or ratchet to loosen and remove these screws. Note that some screws might not fully detach from the housing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_wEdt06Tma8</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11406-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0aoMuX5ofTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Air Filter — Engine Air Filter Replacement</video:title>
      <video:description>Once the air filter cover is removed, carefully pull out the old, dirty air filter from its housing. Note its orientation within the housing, as the new filter will need to be installed in the same manner.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0aoMuX5ofTk</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11406-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/K4dMBqvpskQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Old Air Filter — Engine Air Filter Replacement</video:title>
      <video:description>After loosening the screws, lift the air filter box cover to expose the old air filter. Carefully pull out the old filter element from its housing. The host notes that the old filter is visibly dirty and discolored.</video:description>
      <video:player_loc>https://www.youtube.com/embed/K4dMBqvpskQ</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11406-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7_uvhi6DC28/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Removing Old Filter and Preparing for New — Engine Air Filter Replacement</video:title>
      <video:description>With the air intake tube disconnected and clips released, the top of the air filter housing can be lifted and moved aside. The old air filter is then pulled out from its slot. The host dons a pair of disposable gloves to prevent getting engine grease on his hands. He notes that the intake area looks clean and doesn&apos;t require vacuuming.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7_uvhi6DC28</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11407-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bLhgPBgTf3c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Air Filter Housing — Engine Air Filter Replacement</video:title>
      <video:description>Before installing the new filter, use a shop vacuum to clean out any accumulated dirt, leaves, or debris from inside the air filter housing. A clean housing ensures that no new contaminants are immediately introduced to the new filter or the engine&apos;s intake system. Avoid using water or any liquid cleaners inside the housing, as moisture can damage engine components or sensors.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bLhgPBgTf3c</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11407-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bnmEushTW1w/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Air Filter Housing — Engine Air Filter Replacement</video:title>
      <video:description>Before placing the filters back, take a clean rag and wipe down the interior of the air filter housing. This will remove any loose dirt, dust, or debris that may have collected, ensuring a clean environment for the filters and preventing contamination of the engine.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bnmEushTW1w</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11407-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TJdEHHOehi8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Airbox Housing — Engine Air Filter Replacement</video:title>
      <video:description>Before installing the new filter, it&apos;s a good practice to clean out any accumulated dirt and debris from the bottom of the airbox. Use a vacuum cleaner to remove leaves, dust, and other particles that might have settled in the housing. This prevents new debris from immediately contaminating the new filter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TJdEHHOehi8</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11408-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0aoMuX5ofTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Air Filter — Engine Air Filter Replacement</video:title>
      <video:description>Take the new air filter and carefully position it inside the air filter housing. Ensure it sits snugly and correctly, matching the orientation noted when removing the old filter. The filter should slide into place without excessive force.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0aoMuX5ofTk</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11408-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bLhgPBgTf3c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Air Filter — Engine Air Filter Replacement</video:title>
      <video:description>Take the new air filter and carefully place it into the air filter housing, ensuring it sits flush and properly sealed within its designated slot. Pay attention to any directional arrows on the filter itself or the housing, as some filters are designed for airflow in a specific direction. Improper seating can lead to unfiltered air entering the engine.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bLhgPBgTf3c</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11408-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i77_YqQsnPs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install New Air Filter — Engine Air Filter Replacement</video:title>
      <video:description>Take the new air filter and carefully position it into the cleaned filter cover, ensuring it sits snugly. Align the tabs on the filter cover with the corresponding slots in the engine&apos;s housing. Once aligned, rotate the cover upwards until it snaps firmly into place, securing the new air filter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i77_YqQsnPs</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11409-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DpjGsehd6qI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reattach Air Filter Housing Cover — Engine Air Filter Replacement</video:title>
      <video:description>To re-install the air filter housing cover, first align the &apos;ears&apos; or tabs on the back of the cover with their corresponding slots on the air filter housing base. Push the cover back so these tabs engage. Then, press down firmly on the front of the cover until the two clips engage and lock into place, securing the housing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DpjGsehd6qI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11401-1</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Curved Stair Measurement</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11401-2</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Curved Stair Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11401-3</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Curved Stair Measurement</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11402-1</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Curved Stair Measurement</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11402-2</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Curved Stair Measurement</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11402-3</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hOcPPO4LRfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Custom Tread Templates — Curved Stair Measurement</video:title>
      <video:description>New stair treads typically come as 1x12 red oak boards, ¾ inch thick and 11 ½ inches wide. Since these might be too wide, they need to be cut down from the back to maintain the pre-formed nosing on the front. Because the space between the skirt boards may not be perfectly square or parallel, a custom template is required for each tread. Begin by taking an old, cut-down tread that fits loosely in the opening and placing a piece of paper (or cardboard) on top. Mark a reference line on the riser. Then, use a small combination square or a piece of straight metal/wood as a guide to trace the contours of the skirt board onto the paper, keeping the guide tight against the skirt board. Slide the guide along the length of the paper, making continuous pencil lines at each end and several points in between, ensuring the lines are not bridged by any dips in the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hOcPPO4LRfI</video:player_loc>
      <video:duration>194</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11403-1</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Curved Stair Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11403-2</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Curved Stair Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11403-3</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Curved Stair Measurement</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11400-1</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — Curved Stair Measurement</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11400-2</loc>
    <lastmod>2026-10-18T21:04:08.021Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FiwJtKWIGJk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Preparation of Stairs and Gathering Tools — Curved Stair Measurement</video:title>
      <video:description>Before starting the installation, gather all necessary tools and materials as shown. Prepare the existing stairs by removing any old staples, nails, fasteners, or adhesives using a scraping tool. Thoroughly sweep and vacuum all step treads and risers to ensure they are clean, smooth, and structurally sound. If your stairs have an existing overhang, modify them by either cutting off the overhang or filling in the area beneath it to ensure the riser is flush with the step edge. Use a drill to secure any loose elements, ensuring all modifications comply with local building codes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FiwJtKWIGJk</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-10-18T21:04:08.021Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11397-1</loc>
    <lastmod>2026-10-18T17:17:03.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Custom Size Landing Tread Order</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-18T17:17:03.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11397-2</loc>
    <lastmod>2026-10-18T17:17:03.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Custom Size Landing Tread Order</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-18T17:17:03.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11397-3</loc>
    <lastmod>2026-10-18T17:17:03.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — Custom Size Landing Tread Order</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-18T17:17:03.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11398-1</loc>
    <lastmod>2026-10-18T17:17:03.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Custom Size Landing Tread Order</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-18T17:17:03.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11398-2</loc>
    <lastmod>2026-10-18T17:17:03.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Custom Size Landing Tread Order</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-18T17:17:03.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11398-3</loc>
    <lastmod>2026-10-18T17:17:03.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — Custom Size Landing Tread Order</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-18T17:17:03.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11396-1</loc>
    <lastmod>2026-10-18T17:17:03.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Custom Size Landing Tread Order</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-18T17:17:03.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11396-2</loc>
    <lastmod>2026-10-18T17:17:03.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JVcVfU7Zwb4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Calculate Stair Dimensions — Custom Size Landing Tread Order</video:title>
      <video:description>First, measure the total height of the area where the stairs will be installed. Using this total height, and considering local building codes for rise and run, calculate the exact number of steps (treads) you will need. Simultaneously, determine the required width for each tread and the consistent rise (height) for each step to ensure a comfortable and safe ascent/descent. This pre-calculation is vital for accurate stringer layout and material estimation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JVcVfU7Zwb4</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-18T17:17:03.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11396-3</loc>
    <lastmod>2026-10-18T17:17:03.536Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaMuXCbXfks/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Determine Staircase Dimensions — Custom Size Landing Tread Order</video:title>
      <video:description>Before cutting, ensure the stair location has a flat, solid landing base. Accurate measurements are crucial for planning and material costs. When constructing in the framing stage, remember to factor in the thickness of the finished flooring (e.g., hardwood, tile) to prevent the bottom step from being too tall and non-code compliant. First, measure the total vertical rise from the top floor to the bottom floor. For this example, the rise is 85 inches. Next, estimate the number of steps by dividing the total rise by an estimated riser height (typically between 7 and 7 3/4 inches maximum, per code). Round up any uneven result to the nearest whole number to get the total number of steps. In this example, 85 inches divided by 7 3/4 inches (estimated) equals 10.96, which rounds up to 11 steps. Then, calculate the exact riser height by dividing the total rise (85 inches) by the total number of steps (11), resulting in an exact riser height of 7 3/4 inches. Finally, determine the total horizontal run of the staircase by multiplying the number of steps by the required tread depth (at least 10 inches deep, per code). For 11 steps, this yields a total run of 110 inches. The total length of the stringer board needed can then be estimated by multiplying the number of steps by 14 inches (a general rule of thumb), which comes out to 154 inches for 11 steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaMuXCbXfks</video:player_loc>
      <video:duration>123</video:duration>
      <video:publication_date>2026-10-18T17:17:03.536Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11389-1</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7yxoREbqiRA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access the Evaporator Coil — AC Coil Cleaning</video:title>
      <video:description>To reach the evaporator coil, locate the access panel on your furnace unit. This panel is generally secured by multiple screws around its perimeter. Using a screwdriver, carefully remove all screws and then gently pull the access panel away from the unit. The evaporator coil will be exposed inside, typically positioned where the refrigerant lines from the outdoor air conditioning unit enter the furnace, above the internal drain pan. For better visibility in confined spaces, a flashlight can be very helpful.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7yxoREbqiRA</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11389-2</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zVX6U87hLmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Evaporator Coils — AC Coil Cleaning</video:title>
      <video:description>To gain access to the evaporator coils, you will need to remove one or more access panels from the furnace or air handler unit. Use a screwdriver to unthread any retaining screws securing these panels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zVX6U87hLmc</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11389-3</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6M43-BVP1io/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Locate and Access Evaporator Coils — AC Coil Cleaning</video:title>
      <video:description>Begin by locating the air handler unit, which houses the evaporator coils. These units are typically found in an attic or a utility closet. Identify the refrigerant lines (often insulated) entering the unit. The evaporator coils will be behind the panel where these lines enter. Use an appropriate screwdriver to remove the screws securing this access panel to open the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6M43-BVP1io</video:player_loc>
      <video:duration>44</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11390-1</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zVX6U87hLmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Cleaner to Evaporator Coils — AC Coil Cleaning</video:title>
      <video:description>While wearing appropriate eye and skin protection, apply an even, saturating spray of the universal coil cleaner to the exposed evaporator coils. Allow the detergent to set for at least 10 minutes. The cleaner will work to loosen accumulated dirt and debris during this time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zVX6U87hLmc</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11390-2</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6M43-BVP1io/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Evaporator Coil Cleaner — AC Coil Cleaning</video:title>
      <video:description>Apply a specialized evaporator coil cleaner generously over all the coil fins. Ensure complete coverage. Some coil cleaners are self-rinsing, meaning the condensation from the air conditioner will gradually wash away the cleaner and dirt. However, for heavily soiled coils or if you prefer a more thorough clean, it&apos;s beneficial to manually rinse. Allow the cleaner to soak for a few minutes as directed on the product label.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6M43-BVP1io</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11390-3</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BCfcwkBvDX0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Evaporator Coil Cleaner — AC Coil Cleaning</video:title>
      <video:description>After physically removing the bulk of the debris, apply a commercial coil cleaner, such as the &apos;Coil Cleaner&apos; brand shown in the video (which was purchased at Lowe&apos;s for approximately $7), directly and thoroughly onto the evaporator coils. Ensure the entire dirty surface is covered with the foaming cleaner. Allow the coil cleaner to sit on the coils for approximately 15 to 20 minutes to penetrate and break down the remaining grime. For heavily soiled coils, a second application and waiting period might be necessary. It is highly recommended to place an old towel or a drip pan beneath the coils to catch any dissolved dirt and excess cleaning solution that drips off the coils. A video overlay suggests that cleaning the surface again with your brush after applying the cleaner can be beneficial to work the cleaner into stubborn areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BCfcwkBvDX0</video:player_loc>
      <video:duration>39</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11391-1</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zVX6U87hLmc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Evaporator Unit — AC Coil Cleaning</video:title>
      <video:description>Once the cleaner has had sufficient time to work, reattach all access panels to the furnace or air handler, securing them with the screws previously removed. Rinsing of the evaporator coils is typically not required, as the condensation generated when the system runs will naturally flush out any remaining contaminants.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zVX6U87hLmc</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11391-2</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JLwHqOSa_vo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble AC Unit and Test — AC Coil Cleaning</video:title>
      <video:description>Once the coils are thoroughly rinsed and any remaining debris is removed, begin reassembling the AC unit. First, reattach the top and bottom metal covers to the side of the unit. Ensure they are securely fastened. Next, insert a new, clean AC filter into the designated slot. Finally, reinstall the air intake grill cover. After confirming that everything is correctly reassembled and the coils are completely dry, you can turn the AC unit back on at the thermostat.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JLwHqOSa_vo</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11391-3</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/B1_I4mgicyg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble the Unit — AC Coil Cleaning</video:title>
      <video:description>Once the cleaning and drying are complete, remove the cardboard and garbage bag from inside the furnace. Reinsert the drainage hose into the evaporator coil unit. Carefully place the sheet metal panels back into their original positions, aligning them correctly. Use the screwdriver to reattach all the sheet metal screws that were removed earlier, ensuring the panels are securely fastened. Finally, apply aluminum tape over all the seams and small cracks around the reattached panels and any access points. This step is critical to prevent air leakage, which can reduce the efficiency of the air conditioning system, particularly in areas like a basement where cool air might be unnecessarily pumped.</video:description>
      <video:player_loc>https://www.youtube.com/embed/B1_I4mgicyg</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11392-1</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Q1ExUAab3V8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Outdoor Condenser Coils — AC Coil Cleaning</video:title>
      <video:description>Begin by ensuring the power to the outdoor HVAC condenser unit is completely turned off at the circuit breaker to prevent accidental startup and ensure personal safety during the maintenance process. Once power is confirmed off, locate the retaining screws that secure the side panel of the condenser unit. Using a suitable screwdriver (often a Phillips head or hex driver, depending on the unit), carefully remove these screws. After all screws are disengaged and removed, gently pull the panel away from the unit, setting it aside in a safe location where it won&apos;t be damaged or lost. This action provides clear and unobstructed access to the condenser coils, making them ready for the cleaning process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Q1ExUAab3V8</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11392-2</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AY77tFBBqzM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Access Panels — AC Coil Cleaning</video:title>
      <video:description>With the power safely disconnected, proceed to remove the protective outer panels of the air conditioning condenser unit. Using a screwdriver (or a cordless drill with an appropriate bit), carefully remove all screws that secure these panels to the unit&apos;s frame. There are typically multiple screws along the edges of each panel. Once the screws are removed, gently lift and detach the panels. These panels are often made of metal and can be heavy or have sharp edges, so handle them with care and set them aside in a safe location, ensuring not to damage any internal wiring or components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AY77tFBBqzM</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11392-3</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7e4EymfCDK8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disassemble the AC Condenser Unit — AC Coil Cleaning</video:title>
      <video:description>To safely access and thoroughly clean the condenser coils, first, ensure the electrical power to the AC unit is completely disconnected at the outdoor disconnect box. Using an impact driver or drill, remove all screws securing the top grille and fan assembly. Carefully lift this assembly and move it to the side, ensuring not to strain or disconnect any electrical wiring. Next, remove the screws holding the side panels of the condenser unit, then detach and set aside the panels to fully expose the coils.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7e4EymfCDK8</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11393-1</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IVPpbp4G_6o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Condenser Coil — AC Coil Cleaning</video:title>
      <video:description>Begin by washing the outdoor condenser coil. Use a hose with a spray nozzle to thoroughly rinse the coil, starting from one side and working your way around to remove dirt, debris, and grime. Before washing, inspect the floor of the unit for any rust or corrosion to ensure there are no openings where water could penetrate inside the unit, potentially causing damage or staining to internal components or roof tiles below.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IVPpbp4G_6o</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11393-2</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/M3NYdZIzx2U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pre-rinse Coils — AC Coil Cleaning</video:title>
      <video:description>Using a garden hose with a spray nozzle, pre-wash the condenser coils thoroughly. Start by spraying water from the inside of the unit, directing it outward through the fins. Then, spray the coils from the outside inward. This initial rinse helps to dislodge and remove larger debris, and also pre-soaks and loosens old, hardened dirt within the coil fins, preparing them for the cleaner.</video:description>
      <video:player_loc>https://www.youtube.com/embed/M3NYdZIzx2U</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11393-3</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6APa3OUc0RI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse Condenser Coils (Unitary Split System) — AC Coil Cleaning</video:title>
      <video:description>With the power off, use the water hose set to a &apos;jet&apos; stream. Begin spraying the condenser coils from the top down, working your way around the entire unit. Focus the spray in a downward motion to help dislodge and wash away any debris, dust, or contaminants. Continue until water runs clear from the bottom. This method effectively cleans the coil without causing damage, as shown by visible dirt being rinsed out even from a seemingly clean coil. The water flow also helps clear drainage holes at the bottom of the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6APa3OUc0RI</video:player_loc>
      <video:duration>87</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11394-1</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Aua6029tT6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Straighten Coil Fins (Optional) — AC Coil Cleaning</video:title>
      <video:description>If the evaporator coil fins are bent or crimped, an HVAC fin comb can be used to carefully straighten them. Select the appropriate fin spacing on the comb that matches your coil. Gently pull the comb across the bent fins to align them. This step improves airflow through the coils, enhancing the efficiency of the HVAC system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Aua6029tT6E</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11394-2</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/e-LQe4ToRcg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Straighten Bent Fins — AC Coil Cleaning</video:title>
      <video:description>After cleaning, inspect the coil for any bent fins. If you find any, use a fin comb to carefully straighten them. Maintaining straight fins is important because bent fins restrict airflow, which can be as detrimental to efficiency as a dirty coil, as air cannot move effectively across the coil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/e-LQe4ToRcg</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11394-3</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_M-JLzIQHtk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Straighten Bent Fins (Optional) — AC Coil Cleaning</video:title>
      <video:description>If you notice any significantly bent or crushed aluminum fins on the heat exchanger that are visibly blocking airflow, you may choose to carefully straighten them. A specialized tool called an A/C SAFE FIN-TOOL (or a generic fin comb) is designed for this purpose. This tool features a series of wire-like teeth. To use it, select the appropriate tooth spacing for your fins, gently push the teeth into the bent section, and then carefully move the tool up and down to align and straighten the fins. Exercise extreme caution, as these fins are very fragile and can be easily damaged further or broken if too much force is applied. For minor bends, it&apos;s often best to leave them as is.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_M-JLzIQHtk</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11395-1</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fufqIrp1m8s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Unit and Reconnect Power — AC Coil Cleaning</video:title>
      <video:description>Once the coils are clean and most of the water has drained from the unit, carefully remove the protective covering from the electrical control box and wires. Gently place the top fan assembly back onto the unit, aligning the screw holes with their respective positions. Reinstall all the screws that were removed earlier, using the power drill to secure the top part firmly in place. Double-check that all connections are snug and the unit is fully reassembled. Then, go back to the outdoor electrical disconnect box and restore power by pushing in the fuse block or flipping the switch. Finally, return to your main circuit breaker panel and switch the AC breaker back to the &apos;ON&apos; position.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fufqIrp1m8s</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11395-2</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nsRHhU6q5RY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassemble Unit and Restore Power — AC Coil Cleaning</video:title>
      <video:description>Once the coils are thoroughly rinsed and the foamy residue has largely dissipated, reverse the disassembly steps to put your AC unit back together. Carefully fold the fan assembly back into its original position, ensuring that the electrical wire is not kinked or pinched. Then, replace any panels you removed, starting with the rear panel if it was taken off first. Gently push the panels down to ensure they are seated correctly. Finally, replace all the screws you removed, making sure they are snug but not overtightened. You do not need to wait for the unit to dry before restoring power; it&apos;s designed to be wet. Go back to your outdoor service disconnect box, open it, and flip the main breaker switch back to the &apos;ON&apos; position. Then, return to your indoor thermostat and turn the AC unit back on to test its operation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nsRHhU6q5RY</video:player_loc>
      <video:duration>78</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11395-3</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/k7PSzi7NSyc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Reassembly and Power Restoration — AC Coil Cleaning</video:title>
      <video:description>Carefully place the top panel back onto the AC unit, making sure it aligns correctly and overlaps all sides of the unit&apos;s exterior walls. Reinsert all the removed screws and tighten them by hand using the 5/16&quot; driver. Avoid using power tools for tightening to prevent stripping the metal threads. Once the unit is reassembled, return to the outdoor electrical disconnect box. Open the cover, reinsert the black handle/fuse into its proper position, and close the box cover. The power is now restored to the AC unit, which should now operate more efficiently due to the thorough cleaning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/k7PSzi7NSyc</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11388-1</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJrNMPx_JyI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Turn Off Power to AC Units — AC Coil Cleaning</video:title>
      <video:description>For safety, it is crucial to turn off the power to both the indoor and outdoor AC units before beginning any maintenance. Locate the corresponding circuit breaker in your home&apos;s breaker box and switch it off for the indoor unit. For the outdoor unit, identify and turn off its dedicated on-off switch, which is typically found near the unit itself. This prevents accidental startup and electrical hazards while working on the system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJrNMPx_JyI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11388-2</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yLed1Dg5O0o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Power Off the AC Unit — AC Coil Cleaning</video:title>
      <video:description>Before attempting any maintenance on your AC unit, it is crucial to power off the entire system to prevent electrical shock. Locate the main power switch on the AC unit itself and turn it off. Additionally, go to your home&apos;s main electrical breaker box and turn off the breaker that controls the AC unit. Some units may also have an additional light switch-like cutoff switch nearby that should also be turned off.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yLed1Dg5O0o</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11388-3</loc>
    <lastmod>2026-10-18T14:21:49.947Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/o77xSwu9BzQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — AC Coil Cleaning</video:title>
      <video:description>Before beginning any maintenance on an air conditioning unit, it is absolutely crucial to disconnect its power supply. Locate the breaker in your home&apos;s electrical panel that controls the outside air conditioning unit and switch it to the &apos;off&apos; position. Additionally, turn off the air conditioning unit from the thermostat inside your home. Some outdoor units may also have a fuse block or a dedicated breaker switch located near the unit itself; ensure this is also disengaged. This step prevents accidental startup and potential electrical shock hazards.</video:description>
      <video:player_loc>https://www.youtube.com/embed/o77xSwu9BzQ</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-10-18T14:21:49.947Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11384-1</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Stair Tread Measurement</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11384-2</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Stair Tread Measurement</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11384-3</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Tread Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11385-1</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ubEN4NHJKPI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Individual Riser Height — Stair Tread Measurement</video:title>
      <video:description>With the total vertical rise determined (173 inches) and the total number of risers known (24 risers for this staircase), use a calculator to divide the total rise by the number of risers. For example, 173 inches / 24 risers = 7.2083333 inches per riser (approximately 7 and 1/4 inches or 7.25 inches). This calculation provides the precise height for each individual riser to ensure uniformity across the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ubEN4NHJKPI</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11385-2</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/reF4dSqKIho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Total Vertical Rise — Stair Tread Measurement</video:title>
      <video:description>Accurately measure the vertical distance from the top surface of the lower floor to the top surface of the upper floor where the stairs will connect. This measurement is crucial for all subsequent calculations. For this example, a total rise of 35 inches will be used.</video:description>
      <video:player_loc>https://www.youtube.com/embed/reF4dSqKIho</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11385-3</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oAUp2WuHH6M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calculate Number of Risers and Treads — Stair Tread Measurement</video:title>
      <video:description>Measure the total vertical distance (total rise) from the top of the lower floor (where the stairs begin) to the top of the upper floor (where the stairs end). For instance, if the measurement is 8 feet 9 inches (105 inches). Then, divide the total rise (in inches) by a desired individual riser height (e.g., 7 or 7.5 inches, common building code standards) to determine the number of risers. For example, 105 inches / 7.5 inches = 14 risers. Remember that the number of treads will be one less than the number of risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oAUp2WuHH6M</video:player_loc>
      <video:duration>232</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11387-1</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11387-2</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — Stair Tread Measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11387-3</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Stair Tread Measurement</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11383-1</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Depth — Stair Tread Measurement</video:title>
      <video:description>Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11383-2</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11383-3</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — Stair Tread Measurement</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11386-1</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0K-WWKcB2vY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit and Confirm Measurements of First Stringer — Stair Tread Measurement</video:title>
      <video:description>After cutting the first stringer, take it to the deck and roughly set it in place on the landing pad. Use a measuring tape to double-check the rise of each step and the overall height against your initial calculations. It&apos;s helpful to have a piece of tread material (like a 2x6 deck board) to visually confirm the fit and ensure all dimensions align with the desired rise and run, especially the top surface and bottom surface. If the dimensions are correct, this first cut stringer can then serve as a template for cutting the remaining stringers, ensuring consistency across all stair components.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0K-WWKcB2vY</video:player_loc>
      <video:duration>52</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11386-2</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VmvmYwomlgI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Review Marked Stringer Dimensions — Stair Tread Measurement</video:title>
      <video:description>Begin by understanding the primary dimensions of the marked stringer. The presenter points out a section corresponding to the stair tread, which is 11 and a quarter inches wide. He then indicates the stair riser, which measures 7 and a half inches. A smaller 2 and three-quarter inch section is also highlighted, representing the bottom-most cut for the first riser. These dimensions define the steps and are critical for accurate stringer fabrication. The top of the stringer will align with the existing floor, while the cutouts will accommodate treads and risers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VmvmYwomlgI</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11386-3</loc>
    <lastmod>2026-10-27T20:15:08.984Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PNeGtwOlfPw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Out and Cut the First Stringer — Stair Tread Measurement</video:title>
      <video:description>Obtain a 2x12 piece of lumber for the stringer. Using a framing square, carefully transfer the calculated rise and run dimensions onto the 2x12, marking all cut lines with a pencil. After marking, use a circular saw to meticulously cut along these lines to create the first stringer. This initial stringer is critical as it will serve as a template; use it to accurately trace and cut all subsequent stringers, ensuring consistency across the entire staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PNeGtwOlfPw</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-27T20:15:08.984Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11375-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cUjLarKDlOI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Replace Indoor Air Filter — Heat Pump Repair</video:title>
      <video:description>Gently slide out the old air filter from its slot. Observe how dirty it is; a heavily clogged filter will restrict airflow and force your system to work harder. Note the dimensions printed on the side of the filter (e.g., &apos;16x25x1 inches&apos;), which indicate its size (length, width, and thickness). You can purchase replacement filters with these dimensions at a home center. While some filters can be vacuumed, replacing them with new ones is generally more effective. Unwrap a new filter and slide it into the slot, ensuring the airflow arrow (if present) points towards the furnace/air handler. You cannot change this filter enough, as a clean filter ensures optimal airflow and system performance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cUjLarKDlOI</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11375-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tk9RCrwGB8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Remove Air Filter — Heat Pump Repair</video:title>
      <video:description>The technician removes the existing air filter from the return air duct or air handler. Visually inspect the filter for excessive dust and debris buildup, which can restrict airflow and lead to system inefficiency or malfunction. In this video, the filter is described as &quot;nasty,&quot; indicating significant dirt accumulation. The filter itself is a 3M brand.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tk9RCrwGB8A</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11375-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7umFh6jur3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Indoor Air Handler and Filter — Heat Pump Repair</video:title>
      <video:description>Locate the indoor air handler or furnace. Remove the access panel for the filter compartment (often at the bottom of the unit). Inspect the air filter for excessive dirt, dust, or blockages. Additionally, use a flashlight to visually examine the blower wheel inside the unit for accumulated dirt or debris, which can significantly restrict airflow and reduce system efficiency. The video noted a dirty/missing filter and filthy blower wheel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7umFh6jur3g</video:player_loc>
      <video:duration>115</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11376-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0eQ43CVKICk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Unit Power-Up and Observation — Heat Pump Repair</video:title>
      <video:description>Begin by observing the outdoor heat pump unit (a Payne brand unit is shown) during its initial operation. Ensure the unit is powered on and appears to be functioning as expected. Listen for any unusual noises or vibrations, and note the overall state of the unit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0eQ43CVKICk</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11377-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaTbpQd7OxE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Frozen Suction Line — Heat Pump Repair</video:title>
      <video:description>Begin by identifying the problem: observing the large, insulated pipe (suction line) connected to your outdoor AC condenser unit. This pipe, usually thicker than the other refrigerant line, will be completely frozen over with a thick layer of ice, indicating a malfunction in your AC system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaTbpQd7OxE</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11377-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/i7GAVbeEVlo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify a Frozen HVAC Coil — Heat Pump Repair</video:title>
      <video:description>The first step when suspecting an HVAC issue, especially poor cooling, is to check if the system is frozen. Go to your outdoor HVAC unit and visually inspect the larger insulated copper line, often referred to as the &apos;suction line&apos;. If you observe significant ice buildup on this copper line, it indicates that your indoor evaporator coil is likely frozen.</video:description>
      <video:player_loc>https://www.youtube.com/embed/i7GAVbeEVlo</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11377-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U9EJJGGfdi0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Observe Frozen Line Set and Diagnose Potential Causes — Heat Pump Repair</video:title>
      <video:description>The technician visually inspects the AC unit&apos;s line set, confirming that it is completely frozen, indicating a significant issue with the system. He explains that a frozen line set or evaporator coil points to either a lack of proper airflow or a low refrigerant charge.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U9EJJGGfdi0</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11378-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lfnDP1hQhs0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check Thermostat Settings — Heat Pump Repair</video:title>
      <video:description>Begin by checking your thermostat. Without making any immediate adjustments, observe its current settings. Ensure the system switch is correctly set to &apos;Heat&apos; mode. Additionally, verify that the temperature setting is set higher than the current room temperature; this ensures the thermostat is &apos;calling for heat.&apos; Be mindful of programmable thermostats, as their settings might have inadvertently changed due to schedules or other reasons.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lfnDP1hQhs0</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11378-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tk9RCrwGB8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Thermostat Settings — Heat Pump Repair</video:title>
      <video:description>Check the thermostat for the current temperature setting and mode of operation. Ensure the system is set to &apos;Cool&apos; and the desired temperature is below the ambient room temperature to initiate a cooling call. The thermostat in the video is a White-Rodgers model, displaying a setting of 76 degrees.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tk9RCrwGB8A</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11378-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OaN2oeofdlw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Thermostat Settings — Heat Pump Repair</video:title>
      <video:description>Check the indoor thermostat settings. Ensure the system is in &apos;Heat&apos; mode and the fan is set to &apos;Auto.&apos; Confirm the desired setpoint temperature (71°F in this case) and note the current room temperature display (70°F), indicating the system is actively heating to reach the setpoint.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OaN2oeofdlw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11379-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/peymGz_8BkA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Condensate Drain Line — Heat Pump Repair</video:title>
      <video:description>The condensate drain line, including the P-trap, can become clogged with algae and sludge. First, inspect the P-trap by removing its cap (if present). If it&apos;s dirty, manually clear it using a zip tie or a small brush to push out any buildup. Pour some water down the line to ensure it flows freely. Alternatively, if your drain line has a flush valve, attach a nitrogen tank (with regulator and hoses) or an air compressor to it. Turn the valve so the arrow points away from the system, attach the hose, and push pressurized air to clear the line. If a union is present, disconnect it, direct the pressure into the pipe, and cap the vertical pipe to prevent water from coming back at you. Recharge the P-trap with water after flushing by pouring water into the cleanout.</video:description>
      <video:player_loc>https://www.youtube.com/embed/peymGz_8BkA</video:player_loc>
      <video:duration>183</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11379-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3wSdKcuUcbI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear Outdoor Condensate Drain with Vacuum — Heat Pump Repair</video:title>
      <video:description>Locate the outdoor exit point of your HVAC condensate drain line. This is typically a PVC pipe ending near the outdoor condenser unit, often with an elbow joint. Inspect the end of the pipe for visible clogs or debris. Carefully remove the elbow fitting if present, to ensure a direct and strong suction. Attach the hose of your wet/dry vacuum tightly to the end of the condensate drain pipe. Turn on the vacuum and allow it to suction for several minutes. This powerful suction will pull out any sludge, algae, or debris that has accumulated in the line, helping to clear the blockage. Observe the debris collected in the vacuum container to gauge the severity of the clog.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3wSdKcuUcbI</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11379-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8UvT6v-Tq6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clear the Condensate Drain Line — Heat Pump Repair</video:title>
      <video:description>With the problem confirmed, you can attempt to clear the clog. Start by carefully using your finger to feel for and remove any visible debris or sludge from the drain opening located in the condensate pan. Next, locate the condensate drain line, which is typically a white PVC pipe. The video suggests gently pushing downward on the drain line, especially at the P-trap (a U-shaped bend in the pipe), to dislodge any internal blockages. This manual intervention can often resolve minor clogs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8UvT6v-Tq6E</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11380-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IVPpbp4G_6o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect &amp; Tighten Electrical Connections — Heat Pump Repair</video:title>
      <video:description>With the unit de-energized, perform a thorough inspection of the electrical compartment. Use a screwdriver to check and tighten all electrical wire connections to ensure they are secure and won&apos;t vibrate loose during operation. Inspect the connections on the capacitors to ensure they are snug. Also, inspect the contactors for any signs of pitting or excessive wear, which could indicate they need replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IVPpbp4G_6o</video:player_loc>
      <video:duration>103</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11380-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7umFh6jur3g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Access Electrical Panel &amp; Check Power — Heat Pump Repair</video:title>
      <video:description>Using an impact driver or screwdriver, carefully remove the electrical access panel on the outdoor condensing unit. This will expose the internal wiring, capacitor, and contactor. Visually inspect these components for any obvious signs of damage or wear. Use a multimeter or clamp meter to check for 24V AC control voltage between the &apos;R&apos; and &apos;C&apos; (or &apos;Y&apos; and &apos;C&apos;) terminals at the contactor to determine if the indoor unit is successfully calling for cooling. Also, check the unit&apos;s service label for any historical data, such as previous refrigerant charges, as seen with the &apos;6 LBS R22 6/20/24&apos; notation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7umFh6jur3g</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11380-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lXZ9bnVwY0c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Conduct Visual Inspection of Electrical Components — Heat Pump Repair</video:title>
      <video:description>Before any electrical work, ensure the power to the HVAC unit is completely off at the circuit breaker and the external disconnect switch. Perform a thorough visual inspection of all high-voltage electrical components within the unit. Carefully check all high-voltage wires for any signs of fraying, burns, or damage. Inspect all terminals to ensure they are tight and free from corrosion or discoloration, as loose connections can cause intermittent operation or complete component failure. Examine the contactor for signs of pitting or damage on its contacts. Verify that the disconnect switch and circuit breaker are in good working order and haven&apos;t tripped due to a fault. Pay special attention to the capacitors for any bulging, leaks, or rust, which are indicators of failure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lXZ9bnVwY0c</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11381-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VOnuOTgEfro/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Discharge and Test Capacitor with Multimeter — Heat Pump Repair</video:title>
      <video:description>Locate the run capacitor, which is typically a cylindrical component. Even with the power disconnected, capacitors can store a dangerous electrical charge. Safely discharge the capacitor by shorting its terminals. A common method is to use an insulated screwdriver with a metal shaft, touching the metal shaft across the capacitor terminals simultaneously. You may see a spark. For a more controlled and safer discharge, use a capacitor discharge tool. After discharging, use a multimeter set to measure capacitance (μF or microfarads) to test the old capacitor. Connect the multimeter leads to the capacitor terminals. A reading significantly lower than the specified value on the capacitor label (or an open circuit/zero reading) indicates a faulty capacitor, confirming the need for replacement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VOnuOTgEfro</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11381-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NkgxNLCrmr0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Capacitor Capacitance — Heat Pump Repair</video:title>
      <video:description>To test the capacitance, set your multimeter to the capacitance testing function (usually denoted by a &apos;µF&apos; symbol). Once set, touch the multimeter probes to each terminal of the capacitor. If the capacitor is functioning correctly, the multimeter display should show a reading that is very close to the rated microfarad (MFD) value printed on the capacitor. Keep in mind that capacitors can lose capacitance over time, and a deviation exceeding a 5% tolerance from the rated value indicates that the capacitor has degraded and should be replaced, as this will negatively impact motor performance. For dual run capacitors, you will need to perform two separate capacitance tests: first, from the HERM terminal to the Common terminal, and then from the Fan terminal to the Common terminal. Both readings should closely match the two rated MFD values specified on the dual run capacitor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NkgxNLCrmr0</video:player_loc>
      <video:duration>47</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11381-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3zVyW4_FwBc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Safely Inspect and Test the Capacitor — Heat Pump Repair</video:title>
      <video:description>Before handling any capacitor, it is crucial to ensure power is cut from the circuit and then safely discharge the capacitor. Capacitors can retain a dangerous charge even after power is off. To discharge, carefully place a screwdriver across the two terminals. Then, perform a visual inspection for any obvious signs of failure such as leakage, cracks, bulges, or a displaced membrane on the top. If no visual indicators are present, use a multimeter set to capacitance mode to test the component. Remove the capacitor from the circuit, connect the multimeter leads to its terminals, wait a few seconds, and note the microfarad (mfd) reading. This reading should fall within the range specified on the capacitor&apos;s label. If it&apos;s outside this range, the capacitor has failed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3zVyW4_FwBc</video:player_loc>
      <video:duration>50</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11373-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uiLicM3N4fQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Power Down the Unit Safely — Heat Pump Repair</video:title>
      <video:description>Before beginning any work on your air conditioner or heat pump, it is crucial to cut off all power to prevent electrical shock or damage. First, pull out the disconnect located on the outdoor unit. Next, go to your main electrical panel box and locate the breakers for both the outdoor unit (condenser) and the indoor air handler. Turn both of these breakers to the &apos;off&apos; position. Turning off the air handler is important because it supplies 24 volts to the contactor&apos;s relay; accidentally shorting these wires could blow out the 24-volt transformer inside the air handler, leading to further repair needs. If your panel box labels are unclear or missing, use a multimeter to double-check and verify that power is completely off at the unit before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uiLicM3N4fQ</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11373-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/8fFQXpmjtRE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power Safely — Heat Pump Repair</video:title>
      <video:description>Before any electrical work, prioritize safety by disconnecting all power to the HVAC unit. First, locate the outdoor service disconnect switch, typically mounted on the wall near the unit, and switch it to the &apos;OFF&apos; position. Next, proceed to the main electrical panel (shown as an old Federal Pacific panel) inside the house or main service area. Identify the circuit breaker that controls the outdoor unit (the video indicates a 50-amp breaker was previously in use for the upstairs unit) and switch it off. Use a voltage tester to confirm that no power is present at the unit&apos;s control board or any exposed wiring before proceeding.</video:description>
      <video:player_loc>https://www.youtube.com/embed/8fFQXpmjtRE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11373-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rpANlj_leho/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Disconnect Power — Heat Pump Repair</video:title>
      <video:description>Before performing any maintenance on your heat pump system, always prioritize safety by switching off the power. Locate the electrical panel for your home and identify the circuit breaker specifically for your heat pump. Flip the switch to the &apos;off&apos; position to disconnect the power supply to both the indoor and outdoor units.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rpANlj_leho</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11374-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/IVPpbp4G_6o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Compressor, Condenser, and Refrigerant Lines — Heat Pump Repair</video:title>
      <video:description>Inspect the compressor and condenser compartment. Check all electrical connections to the compressor and condenser fan motor, ensuring they are snug and won&apos;t vibrate loose. If it&apos;s a heat pump, inspect the connections to the reversing valve as well. Visually inspect the condenser coils and refrigerant lines for any signs of oil or corrosion, which could indicate a refrigerant leak. Also, ensure all fittings on the compressor and refrigerant lines are tight.</video:description>
      <video:player_loc>https://www.youtube.com/embed/IVPpbp4G_6o</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11374-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nOkMMpt4Ei0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check AC Coils and Blades for Cleanliness — Heat Pump Repair</video:title>
      <video:description>Inspect your outdoor AC unit&apos;s condenser coils and fan blades. Make sure they are clean of any dirt, leaves, grass clippings, or other debris. Accumulated debris can restrict airflow and hinder heat exchange, significantly reducing cooling efficiency and potentially causing the unit to overwork. The video suggests doing this every spring to prevent future issues. *In the context of electrical troubleshooting, if the AC unit&apos;s fan is not spinning or the compressor is not engaging, after verifying power at the electrical panel, a multimeter can be used to check for line voltage (240V AC) at the contactor, voltage across the run capacitor terminals (after discharging it safely), and continuity of the fan motor windings. This helps diagnose if the electrical fault lies in the power supply to the unit, the capacitor, or the motor itself.*</video:description>
      <video:player_loc>https://www.youtube.com/embed/nOkMMpt4Ei0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11374-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nOkMMpt4Ei0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check AC Coils and Blades for Cleanliness — Heat Pump Repair</video:title>
      <video:description>Inspect your outdoor AC unit&apos;s condenser coils and fan blades. Make sure they are clean of any dirt, leaves, grass clippings, or other debris. Accumulated debris can restrict airflow and hinder heat exchange, significantly reducing cooling efficiency and potentially causing the unit to overwork. The video suggests doing this every spring to prevent future issues. *In the context of electrical troubleshooting, if the AC unit&apos;s fan is not spinning or the compressor is not engaging, after verifying power at the electrical panel, a multimeter can be used to check for line voltage (240V AC) at the contactor, voltage across the run capacitor terminals (after discharging it safely), and continuity of the fan motor windings. This helps diagnose if the electrical fault lies in the power supply to the unit, the capacitor, or the motor itself.*</video:description>
      <video:player_loc>https://www.youtube.com/embed/nOkMMpt4Ei0</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11382-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LmGmHYKj6GE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Observe Outdoor Condensing Unit Operation — Heat Pump Repair</video:title>
      <video:description>Proceed to the outdoor condensing unit on the roof. Observe the unit&apos;s operation. The fan is running, but the compressor is not. A distinct humming or buzzing sound indicates that the compressor is attempting to start but failing, suggesting a problem with the start circuit, often the run capacitor.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LmGmHYKj6GE</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11382-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QaTbpQd7OxE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Diagnose Underlying Cause — Heat Pump Repair</video:title>
      <video:description>After powering down the unit, you need to diagnose the underlying cause of the frozen suction line. The video identifies two main issues: either a low refrigerant charge in your system or a dirty (filthy) air filter that is preventing adequate airflow. Observe your indoor air filter to check if it&apos;s visibly clogged.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QaTbpQd7OxE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11372-1</loc>
    <lastmod>2026-10-17T04:07:38.319Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-17T04:07:38.319Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11372-2</loc>
    <lastmod>2026-10-17T04:07:38.319Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Stair Tread Measurement</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-17T04:07:38.319Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11372-3</loc>
    <lastmod>2026-10-17T04:07:38.319Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — Stair Tread Measurement</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-17T04:07:38.319Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11371-1</loc>
    <lastmod>2026-10-17T04:07:38.319Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Stair Tread Measurement</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-17T04:07:38.319Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11371-2</loc>
    <lastmod>2026-10-17T04:07:38.319Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Stair Tread Measurement</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-17T04:07:38.319Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11371-3</loc>
    <lastmod>2026-10-17T04:07:38.319Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qlFGteqDXFA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Carpet Tread — Stair Tread Measurement</video:title>
      <video:description>Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was &apos;a little tight.&apos; Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qlFGteqDXFA</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-10-17T04:07:38.319Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11366-1</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Stair Tread Installation</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11366-2</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Stair Tread Installation</video:title>
      <video:description>Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11366-3</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rON0c9UvU2E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Clean Stair Treads — Stair Tread Installation</video:title>
      <video:description>Begin by thoroughly cleaning the stair treads. You can use a microfiber cloth or any suitable cloth, optionally combined with a handheld vacuum, to remove all dust and loose dirt. The goal is to ensure the entire stair surface is clean and completely dry. This is crucial for the adhesive on the back of the carpet treads to stick properly. Avoid using any cleaning products that might leave a greasy residue, such as Pledge or Pine-Sol, as this can compromise the adhesive bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rON0c9UvU2E</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11369-1</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/N5xVJ2fg2YQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow for Curing and Final Cleanup — Stair Tread Installation</video:title>
      <video:description>Allow the construction adhesive to cure completely. The video mentions a cure time of 2 to 7 days, so avoid stepping on the newly repaired steps during this period to allow the adhesive to fully bond and strengthen. The man places a traffic cone as a visual reminder to prevent anyone from walking on the step prematurely. After the curing time, blow away any residual dirt or debris from the area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/N5xVJ2fg2YQ</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11369-2</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GVgCcuwyOEE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Curing and Caulking — Stair Tread Installation</video:title>
      <video:description>Once the entire staircase installation is complete, it&apos;s important to allow the adhesive to fully set. Try to limit the use of the stairs for several hours (the video animation suggests around 4-8 hours) to ensure the vinyl bonds securely to the stairs. Depending on the accuracy of your cuts and the desired final aesthetic, you may choose to apply caulking, such as DAP Alex Plus acrylic latex caulk plus silicone, along the sides where the vinyl meets the stringers or walls. This will cover any minor imperfections or gaps, providing a clean and finished look.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GVgCcuwyOEE</video:player_loc>
      <video:duration>42</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11369-3</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Complete Installation and Caulk Gaps — Stair Tread Installation</video:title>
      <video:description>Continue installing the remaining risers and treads by repeating the process outlined in the previous two steps, working your way up the staircase. Ensure each riser is adhered with polyurethane adhesive and secured with finish nails. Similarly, each tread should be dry-fitted, coated with adhesive (perimeter and zigzag), placed with expansion gaps, and nailed at the back edge. Once all risers and treads are installed, clean the stairs thoroughly. Then, use caulk or clear silicone with a caulking gun to fill in all the 1/16 inch expansion gaps for a seamless and finished look. After completion, it&apos;s crucial to stay off the stairs for 24 to 48 hours to allow sufficient time for the construction adhesive to fully dry and cure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11368-1</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Stair Tread Installation</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11368-2</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11368-3</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11367-1</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11367-2</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11367-3</loc>
    <lastmod>2026-10-16T20:58:15.754Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Stair Tread Installation</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-16T20:58:15.754Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11359-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jqLGwe_0AfA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand the Importance of Soil Testing — Lawn Fertilization</video:title>
      <video:description>Before you begin any fertilization or lawn care regimen, it is crucial to understand your soil&apos;s current condition. The presenter explains that blindly applying fertilizers without a soil test can be ineffective or even harmful, as different fertilizers have varying nutrient compositions (e.g., 10-20-5 for high phosphorus needs). A soil test will reveal the &apos;hidden story&apos; of your lawn, including its pH, nutrient levels (like phosphorus, potassium, calcium, magnesium, zinc, manganese, boron, copper, sodium, and sulfur), and Cation Exchange Capacity (CEC). This information is vital for selecting the correct products and application rates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jqLGwe_0AfA</video:player_loc>
      <video:duration>85</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11359-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DfB7juOfopA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Soil Testing — Lawn Fertilization</video:title>
      <video:description>After identifying your grass type, the next step is to conduct a soil test. This simple process involves collecting soil samples from your lawn and sending them to a lab for analysis. The test results will reveal your soil&apos;s pH, nutrient levels (like phosphorus, potassium, calcium, magnesium, sulfur, boron, iron, manganese, zinc, and sodium), and organic matter content. This information is crucial for selecting the correct fertilizers and products, ensuring you apply what your lawn actually needs rather than guessing. The video shows taking soil samples with a tool and placing them into a bucket. It also displays a sample soil analysis report from RxSoil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DfB7juOfopA</video:player_loc>
      <video:duration>74</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11359-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J92XCpiva24/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understand Your Lawn&apos;s Needs (Soil &amp; Grass Type) — Lawn Fertilization</video:title>
      <video:description>Before applying any synthetic fertilizer, it is crucial to understand your lawn&apos;s specific needs. This involves performing a soil test to determine nutrient deficiencies (such as phosphorus or nitrogen levels) and identifying your specific grass type (e.g., St. Augustine, Bermuda). Knowing your soil composition and grass variety will guide the selection of the correct fertilizer or soil improver, ensuring you provide exactly what your lawn requires for optimal health. If you are unsure about your soil type or grass species, you can collect soil samples and a few blades of grass and consult with local gardening experts, such as those at Ace Hardware. They can analyze your samples or test results and recommend the most appropriate products.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J92XCpiva24</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11360-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hXfvF2eymUs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select and Understand Your Fertilizer — Lawn Fertilization</video:title>
      <video:description>Choose a fertilizer that matches your lawn&apos;s needs, guided by your soil test results and the N-P-K ratio displayed on the fertilizer bag (e.g., 18-24-12). N-P-K stands for Nitrogen (N), Phosphorus (P), and Potassium (K), representing their percentage by weight in the product. Nitrogen promotes leafy growth and green color, phosphorus aids strong root development, and potassium enhances overall plant health and regulates growth. For warm-season grasses like Bermuda, a starter fertilizer (higher phosphorus) is beneficial in late spring/early summer to help with emergence from dormancy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hXfvF2eymUs</video:player_loc>
      <video:duration>122</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11360-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4vKNnIZWtwM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Selecting the Correct Fertilizer — Lawn Fertilization</video:title>
      <video:description>When choosing a fertilizer, look for the N-P-K ratio, typically displayed as three large numbers on the front of the bag (e.g., 15-5-10). These numbers represent the percentage by weight of Nitrogen (N), Phosphorus (P), and Potassium (K) in the fertilizer. For example, a 50-pound bag of 15-5-10 fertilizer contains 7.5 pounds of Nitrogen, 2.5 pounds of Phosphorus, and 5.0 pounds of Potassium. To determine your lawn&apos;s specific nutrient needs, conduct a soil test. Soil tests measure the current NPK content and pH levels of your soil, providing valuable information to select the appropriate fertilizer. If your soil has excessive nitrogen, consider using a slow-release fertilizer to temper the amount of nitrogen your lawn receives, as too much can encourage weeds, diseases, or burn the grass roots. Soil test kits can be purchased at big box stores or samples can be submitted to local agricultural extensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4vKNnIZWtwM</video:player_loc>
      <video:duration>84</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11360-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VugMC4buOdU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Appropriate Fall Fertilizer — Lawn Fertilization</video:title>
      <video:description>When selecting a fall fertilizer, the most important factor is the NPK (Nitrogen, Phosphorus, Potassium) analysis, which is typically displayed as three numbers on the bag. The presenter advises ignoring marketing terms like &apos;fall lawn food&apos; or &apos;winterizer&apos; and instead focusing on these numbers in relation to your lawn&apos;s specific needs. He highlights the importance of a soil test to determine nutrient deficiencies. For example, he opted for a &apos;Scotts Turf Builder Starter Food for New Grass&apos; fertilizer with higher phosphorus (which is usually the second number in the NPK ratio, e.g., 24-0-6 or 32-0-10 for nitrogen-rich options like &apos;Yard Mastery Flagship&apos;), because his soil test indicated a deficiency in phosphorus. Generally, a higher nitrogen content is recommended for fall fertilization, unless your soil test dictates otherwise.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VugMC4buOdU</video:player_loc>
      <video:duration>113</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11361-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/myGqz0DD66g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Time Your Fertilization Correctly — Lawn Fertilization</video:title>
      <video:description>To maximize the benefits of your fertilizer, apply it at the correct time of year, aligning with your grass&apos;s active growing season. *   **Warm-Season Grasses (Buffalo, Couch, Kikuyu, Zoysia):** Fertilize during their active growth period, typically from spring to early autumn. *   **Cold-Season Grasses (Fescue, Ryegrass, Kentucky Bluegrass):** Fertilize during their active growth period, usually during autumn and spring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/myGqz0DD66g</video:player_loc>
      <video:duration>72</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11361-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DfB7juOfopA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fertilizer Timing — Lawn Fertilization</video:title>
      <video:description>Properly timing your fertilizer applications is essential for maximizing grass health and growth. For cool-season grasses (up north), the best times to fertilize are in late spring (around late May/Memorial Day timeframe) and especially in the fall, as soon as summer heat breaks (around Labor Day) with additional applications in mid-September and mid-October, depending on your climate. During peak summer heat, cool-season grasses may go dormant, and heavy fertilization is not recommended; instead, use liquid or soluble products with smaller amounts of nitrogen or iron for a &apos;boost of green&apos;. For warm-season grasses (down south), summer is their peak growing season, so focus your fertilization efforts during this time. The video shows a broadcast spreader being used for granular fertilizer and a hose-end sprayer for liquid products.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DfB7juOfopA</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11361-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ewJxxuTTL60/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Timing Your Fertilization Schedule — Lawn Fertilization</video:title>
      <video:description>Timing is crucial for effective fertilization. Nutrients are best absorbed after early spring root growth occurs. Therefore, the first feeding should happen around the time the lawn first shows signs of needing to be mowed in spring. Continue with additional feedings every 4 to 6 weeks throughout the summer to help the lawn withstand heat and drought. The fall feeding is considered the most important as a winterizing fertilizer helps protect the grass roots against cold temperatures, leading to a quicker green-up the following spring.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ewJxxuTTL60</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11362-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nzVOnf2O1Zw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mow the Lawn — Lawn Fertilization</video:title>
      <video:description>Prior to applying granular fertilizer, it is recommended to mow the lawn. This ensures the grass blades are at an optimal height, allowing the fertilizer granules to reach the soil surface more effectively and preventing them from getting caught on long blades. The presenter uses a specialized Reelmaster 3100 D mower to achieve a golf-course like cut. He performs a few passes, ensuring the mower settings are correct and the cut is even, before proceeding with fertilization.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nzVOnf2O1Zw</video:player_loc>
      <video:duration>79</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11362-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/femcTi-8gDM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Lawn by Mowing Short and Clearing Debris — Lawn Fertilization</video:title>
      <video:description>Begin by mowing the lawn to a very short height using a lawnmower. This prepares the lawn for subsequent treatments by removing excess grass and allowing better access to the soil surface. After mowing, remove all grass clippings and any other debris from the lawn, potentially using a leaf blower or raking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/femcTi-8gDM</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11362-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kMyiaEqnp8o/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Lawn for Application — Lawn Fertilization</video:title>
      <video:description>Before applying liquid fertilizer, consider the lawn&apos;s condition. For liquid fertilizers, which offer some foliar intake, it&apos;s generally best not to cut the day before. The presenter cut his lawn three days prior, allowing the blades to stand tall and be ready for absorption. Ensure the lawn is well-irrigated and not heat-stressed, as applying fertilizer to a stressed lawn can cause damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kMyiaEqnp8o</video:player_loc>
      <video:duration>65</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11363-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Ne1aPu2Ic0Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Spread Fertilizer — Lawn Fertilization</video:title>
      <video:description>With the spreader filled, proceed to apply the fertilizer to the lawn. Walk at a consistent pace, either pushing the wheeled spreader or cranking the handheld spreader, to ensure an even distribution of the granules. Make sure to overlap slightly on each pass to avoid striping or missed areas, covering the entire desired lawn area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Ne1aPu2Ic0Q</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11363-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hXfvF2eymUs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calibrate Spreader and Apply Fertilizer — Lawn Fertilization</video:title>
      <video:description>Always check the fertilizer product label for the recommended spreader settings and ensure your broadcast spreader, such as the Chapin All Season Spreader 82099, is calibrated correctly. Before applying to the entire lawn, perform a &apos;trim pass&apos; or perimeter pass. This involves closing the edge control on your spreader (if available) and walking around the perimeter of your lawn to create a clear border, preventing fertilizer from spreading onto sidewalks or driveways. After the trim pass, open the edge control and apply fertilizer by walking back and forth across the main area of the lawn, ensuring even coverage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hXfvF2eymUs</video:player_loc>
      <video:duration>113</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11363-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U4oSWX8sKX4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Calibrate the Fertilizer Spreader — Lawn Fertilization</video:title>
      <video:description>Before applying any fertilizer, it is crucial to calibrate your spreader. Locate the different setting options on your fertilizer spreader. The speaker recommends setting it to the biggest opening. The actual application rate (e.g., 2 kilograms or 3 kilograms per 100 square meters) will be specified on the fertilizer bag. You will then need to adjust your walking speed to ensure that you are spreading the correct amount of fertilizer as you move across the lawn. This process prevents over or under-fertilization.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U4oSWX8sKX4</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11364-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nHbUEqUE7kw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Lawn — Lawn Fertilization</video:title>
      <video:description>Once the entire lawn has been fertilized, lightly water the area using a sprinkler or a garden hose. This crucial step helps the fertilizer granules dissolve and begin to absorb into the soil, which not only promotes faster results but also helps prevent potential grass burn, especially if the weather is warm.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nHbUEqUE7kw</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11364-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bePkzv0wU5c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Lawn After Fertilizing — Lawn Fertilization</video:title>
      <video:description>Immediately after applying the fertilizer, thoroughly water the lawn. The water helps dissolve the fertilizer pellets, acting as carriers, and transports the nutrients into the soil where they can be absorbed by the grass roots. Water for at least 10 minutes to ensure deep penetration. Watering is crucial to prevent the fertilizer from burning the grass, especially on warm days. While watering manually with a hose and sprayer works, using a sprinkler system is more efficient for large areas.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bePkzv0wU5c</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11364-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7Z26u0bEfTo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Lawn Thoroughly — Lawn Fertilization</video:title>
      <video:description>After spreading all the granular fertilizer, use a sprinkler to thoroughly water the entire lawn. Watering helps wash the fertilizer granules into the soil, where they can begin to release nutrients to the grass roots. Once the lawn has been watered in and the surface has dried, it will be safe for people and pets to walk on the grass again.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7Z26u0bEfTo</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11365-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4vKNnIZWtwM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Post-Application Observation and Follow-Up — Lawn Fertilization</video:title>
      <video:description>After applying fertilizer, observe your lawn over the next few weeks. You should begin to see visible results, such as a greener and healthier lawn, within approximately one week. Most standard fertilizers are designed to release nutrients over a period of 4 to 6 weeks. Slow-release fertilizers, however, typically provide nutrients for a longer duration, lasting 6 to 8 weeks. If you believe a follow-up application is necessary, always consult your fertilizer&apos;s label for specific instructions and recommended intervals. For example, Solutions 15-5-10 fertilizer allows for follow-up applications 30 days after the initial treatment. Generally, the best times to fertilize are in early spring and early fall. Some homeowners choose to fertilize their lawns up to four times during each growing season, depending on their turf type, soil conditions, and the specific fertilizers they are using.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4vKNnIZWtwM</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11365-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4MxtBR4dJy4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Post-Application Watering and Progress Check — Lawn Fertilization</video:title>
      <video:description>After applying all the products, continue deep watering the lawn as previously determined by the soil probe tests. Within two days of application and consistent deep watering, observe the lawn&apos;s progress. Areas previously affected by tip burn or drought stress should show significant improvement, with noticeable regrowth and a deeper green color. Pay particular attention to areas that naturally retain more moisture, like shaded spots, as these often show the fastest recovery and deepest green. Continue monitoring and adjusting watering schedules to maintain soil moisture and encourage deep root establishment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4MxtBR4dJy4</video:player_loc>
      <video:duration>108</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11365-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7Z26u0bEfTo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Observe Results and Plan Future Applications — Lawn Fertilization</video:title>
      <video:description>The video concludes by showing the positive results of the fertilization. You should begin to see noticeable improvements in your lawn, such as greener grass and reduced weeds, in as little as two weeks. After approximately eight weeks, it will be time to repeat the feeding process, this time using Scotts Turf Builder UltraFeed, to continue nourishing your lawn throughout the season. This two-part approach helps maintain a healthy and vibrant lawn long-term.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7Z26u0bEfTo</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11357-1</loc>
    <lastmod>2026-10-16T03:03:53.177Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — L-shaped stair tread installation</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-16T03:03:53.177Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11357-2</loc>
    <lastmod>2026-10-16T03:03:53.177Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — L-shaped stair tread installation</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-16T03:03:53.177Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11357-3</loc>
    <lastmod>2026-10-16T03:03:53.177Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — L-shaped stair tread installation</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-16T03:03:53.177Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11356-1</loc>
    <lastmod>2026-10-16T03:03:53.177Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tABaf-op5a4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Review Staircase Dimensions — L-shaped stair tread installation</video:title>
      <video:description>The video displays the specific dimensions for each segment of the staircase. It shows that the straight sections of stairs are 4&apos;2&quot; deep. The intermediate flat landing sections are 3&apos;8&quot; deep, and the top straight section connecting the two angled segments is 4&apos;8&quot; deep. The overall outer dimensions of the layout are provided as 5&apos;9 7/8&quot; for the side straight runs and 6&apos;11 3/4&quot; for the outer angled sections, with a total top width of 7&apos;11 3/4&quot;. These measurements are crucial for precise planning.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tABaf-op5a4</video:player_loc>
      <video:duration>31</video:duration>
      <video:publication_date>2026-10-16T03:03:53.177Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11356-2</loc>
    <lastmod>2026-10-16T03:03:53.177Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tABaf-op5a4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Layout First Straight and Angled Sections — L-shaped stair tread installation</video:title>
      <video:description>To begin the layout, start with the bottom straight section. Measure and mark the full depth of the straight tread section, which is 11 inches, and then add the 6 inches required for the narrowest part of the first winder tread. This defines the initial straight run. Next, draw a line at a 45-degree angle from the outer edge of this first winder tread measurement. This line will define the outer boundary of the first angled section of the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tABaf-op5a4</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-10-16T03:03:53.177Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11356-3</loc>
    <lastmod>2026-10-16T03:03:53.177Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure, Cut, and Test-fit — L-shaped stair tread installation</video:title>
      <video:description>With the skirting boards removed, carefully measure the exact dimensions required for your winder step and winder step extensions. Place the winder step and extension pieces onto the landing area and mark any areas that need to be cut to achieve a precise fit, especially around corners or existing newel posts. The video shows using a measuring tape to determine the length needed and marking the pieces with a pencil. Make sure to test-fit each piece multiple times, adjusting cuts as needed, to ensure a snug and accurate placement around any obstacles, such as the newel post or wall edges, before proceeding to permanent installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-16T03:03:53.177Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11358-1</loc>
    <lastmod>2026-10-16T03:03:53.177Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Order Winder Steps and Extensions — L-shaped stair tread installation</video:title>
      <video:description>Begin by determining the necessary number of winder steps and winder step extensions for your landing area. To do this, measure the depth of your landing area from the back wall to the front edge. To this measurement, add 30 millimeters (approximately 1.2 inches) to account for the nosing, which is the slightly projecting edge of the new winder step. The front portion of the landing area will be covered by the winder step itself, while any remaining deeper sections behind it will require winder step extensions. For instance, in the video, a 600mm (approx. 23.6 inches) winder step and two winder step extensions are used for the staircase shown.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-16T03:03:53.177Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11358-2</loc>
    <lastmod>2026-10-16T03:03:53.177Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure, Cut, and Test-fit — L-shaped stair tread installation</video:title>
      <video:description>With the skirting boards removed, carefully measure the exact dimensions required for your winder step and winder step extensions. Place the winder step and extension pieces onto the landing area and mark any areas that need to be cut to achieve a precise fit, especially around corners or existing newel posts. The video shows using a measuring tape to determine the length needed and marking the pieces with a pencil. Make sure to test-fit each piece multiple times, adjusting cuts as needed, to ensure a snug and accurate placement around any obstacles, such as the newel post or wall edges, before proceeding to permanent installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-16T03:03:53.177Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11358-3</loc>
    <lastmod>2026-10-16T03:03:53.177Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tABaf-op5a4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Layout First Straight and Angled Sections — L-shaped stair tread installation</video:title>
      <video:description>To begin the layout, start with the bottom straight section. Measure and mark the full depth of the straight tread section, which is 11 inches, and then add the 6 inches required for the narrowest part of the first winder tread. This defines the initial straight run. Next, draw a line at a 45-degree angle from the outer edge of this first winder tread measurement. This line will define the outer boundary of the first angled section of the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tABaf-op5a4</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-10-16T03:03:53.177Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11354-1</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wlrZJhNKDF8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Stair Surface — Removable Stair Treads</video:title>
      <video:description>Although not explicitly demonstrated in the video, it is crucial to ensure the staircase is clean before installing the treads. Thoroughly clean each wooden stair surface to remove any dust, dirt, pet hair, or debris. This preparation ensures optimal adhesion of the non-slip backing, preventing the treads from shifting and maintaining a neat appearance. Use a vacuum cleaner for loose particles, followed by a damp cloth and a mild cleaner if necessary.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wlrZJhNKDF8</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11354-2</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wSsFb5YVHag/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Stair Surface — Removable Stair Treads</video:title>
      <video:description>Before applying the anti-slip strip, it is crucial to ensure the stair surface is clean, dry, and free of any dust, dirt, or grease. Use a cleaning cloth and a mild cleaner to thoroughly wipe down the area where the strip will be applied. Allow the surface to dry completely to ensure optimal adhesion of the self-adhesive strip.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wSsFb5YVHag</video:player_loc>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11354-3</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Stairs — Removable Stair Treads</video:title>
      <video:description>Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11355-1</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9OF3FBDsqcs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stair Treads to Steps — Removable Stair Treads</video:title>
      <video:description>With the treads unpacked, carefully position one stair tread onto the surface of a stair. Ensure it is centered and aligned properly. Once placed, firmly press down on the entire surface of the tread with your hands to activate the adhesive backing and secure it to the stair. Repeat this process for each step, ensuring consistent placement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9OF3FBDsqcs</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11355-2</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Removable Stair Treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11355-3</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Removable Stair Treads</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11352-1</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Removable Stair Treads</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11352-2</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Removable Stair Treads</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11352-3</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the Stair Tread onto the Stair — Removable Stair Treads</video:title>
      <video:description>Carefully position the prepared self-adhesive stair tread onto a clean wooden stair. Ensure the tread is centered and aligned properly with the front edge of the stair. Once correctly placed, firmly press down on the entire surface of the tread with your hands. Apply even pressure across the tread to ensure proper adhesion and remove any air bubbles. Repeat this process for each stair, working your way up or down the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11353-1</loc>
    <lastmod>2026-10-15T18:37:24.370Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/UKogM4HOVCw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry the Stairs — Removable Stair Treads</video:title>
      <video:description>After cleaning, it is essential that your stairs are completely dry before proceeding with the installation of the anti-slip treads. This will prevent moisture from compromising the adhesive&apos;s bond. Allow ample time for air drying, or use a dry cloth to speed up the process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/UKogM4HOVCw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-15T18:37:24.370Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11339-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GH6Kz2HaF6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Chemical Rust Dissolver Application — Rust Removal</video:title>
      <video:description>When working with chemical rust removers, always prioritize safety. These products often contain intense fumes, so ensure you suit up with rubber gloves, goggles, and a respirator to protect yourself. Alternatively, for a safer and gentler approach, you can use chemicals that dissolve rust more slowly. Products like Evapo-Rust are designed for soaking items to gradually dissolve rust. While they require more patience, they are effective.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GH6Kz2HaF6E</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11339-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DzXfT-J4cL8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Chemical Rust Removal (Vinegar &amp; Salt Soak) — Rust Removal</video:title>
      <video:description>For larger areas of rust, a vinegar and salt mixture can be an effective chemical method. First, clean and dry the tool. Then, place the tool in a container large enough to completely submerge the rusted metal parts. Pour in enough distilled white vinegar to cover the rusted areas, and sprinkle Morton coarse kosher salt over the surface. The recommended ratio is 1/4 cup of salt per 1 liter (approximately 4.2 cups) of vinegar. Allow the tool to soak for 1 to 3 days, checking periodically. Once the rust begins to soften, use sandpaper, steel wool, or a wire brush to scrub it off. Finally, wipe the tool clean and dry it thoroughly.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DzXfT-J4cL8</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11339-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6NHznQzuJqA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Remove Rust — Rust Removal</video:title>
      <video:description>The most critical step is to thoroughly remove all rust. The presenter strongly recommends using Evapo-Rust Super Safe Rust Remover. This product is water-soluble, pH-neutral, reusable, biodegradable, non-toxic, non-corrosive, free of acids, VOCs, or fumes, and safe on skin and eyes. It effectively removes rust down to bare metal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6NHznQzuJqA</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11340-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nODqdL5uk2k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Thorough Cleaning and Degreasing — Rust Removal</video:title>
      <video:description>After all mechanical rust removal and sanding, thoroughly wipe down the entire metal block with a clean cloth to remove all dust, metal filings, and loose particles. This ensures a perfectly clean surface, free of contaminants, which is essential before applying any chemical treatments or protective coatings. A degreaser can be used to ensure the surface is free of oils and greases.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nODqdL5uk2k</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11340-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iS8Cke3CLC4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply First Coat of Rust Remover to Saw Blade — Rust Removal</video:title>
      <video:description>Don safety glasses and protective gloves. Pour a small amount of the phosphoric acid-based rust remover (like SKJ Ospho) into a plastic container. Using a paint brush, apply an even coat of the rust remover to the heavily rusted surface of the metal item, ensuring good coverage. The product is thin, like water, and begins to loosen the rust upon application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iS8Cke3CLC4</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11340-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VXv-HYJTqEg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wipe and Dry Tools — Rust Removal</video:title>
      <video:description>Once all the rust has been removed, use a clean cloth to thoroughly wipe down the entire surface of the tool. Ensure all residues from the rust remover and any lingering rust particles are completely removed. Dry the tool completely, as any moisture can lead to rapid re-rusting. A completely clean and dry surface will help maintain the tool&apos;s improved condition.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VXv-HYJTqEg</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11341-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DzXfT-J4cL8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mechanical Rust Removal — Rust Removal</video:title>
      <video:description>For minor rust removal, mechanical methods are suitable. Begin by using coarse-grit sandpaper to abrade the rusty areas on your tools, such as pruning shears. Follow up with finer-grit sandpaper for a smoother finish. If rust persists, use steel wool or a stiff wire brush to scrub the affected areas. For heavier rust, a hand drill with a steel brush attachment can be used. Secure the tool, don safety glasses and gloves, and apply the spinning brush to the rust until it&apos;s removed. Afterward, wipe the tool clean with a paper towel or rag.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DzXfT-J4cL8</video:player_loc>
      <video:duration>43</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11341-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GH6Kz2HaF6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mechanical Rust and Paint Removal — Rust Removal</video:title>
      <video:description>If you prefer not to use chemicals or need to remove old paint along with the rust, use power tools for mechanical abrasion. For large, flat areas, employ a grinder with flap discs, fiber discs, or sanders. For seams, corners, and rounded areas, switch to a drill with wire wheels. For rusted metal corners, tight spots, and small details, a detail sander is recommended. Drill-mounted wire wheels and stripping discs can also be used as rust removers instead of grinders. Finishing and random-orbit sanders are useful for rust removal on flatter surfaces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GH6Kz2HaF6E</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11341-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nODqdL5uk2k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Aggressive Rust Removal with Wire Wheel — Rust Removal</video:title>
      <video:description>Utilize an angle grinder fitted with a coarse wire wheel attachment to aggressively strip away the remaining heavy rust from the broad, flat surfaces and accessible edges of the metal block. Apply moderate pressure, allowing the wire wheel to abrade the rust effectively, revealing the underlying metal. Ensure consistent movement to avoid gouging the surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nODqdL5uk2k</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11342-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VXv-HYJTqEg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Soak Tools in Rust Remover — Rust Removal</video:title>
      <video:description>Begin by pouring WD-40 Specialist Rust Remover Soak into a tray. Place the rusted metal tool, such as an adjustable wrench, into the tray, ensuring it is completely covered and submerged by the rust remover solution. Allow the tool to soak for a minimum of one hour. For tools with heavy or stubborn rust, extend the soaking time as needed to allow the solution to effectively dissolve the rust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VXv-HYJTqEg</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11342-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GH6Kz2HaF6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Chemical Rust Dissolver Application — Rust Removal</video:title>
      <video:description>When working with chemical rust removers, always prioritize safety. These products often contain intense fumes, so ensure you suit up with rubber gloves, goggles, and a respirator to protect yourself. Alternatively, for a safer and gentler approach, you can use chemicals that dissolve rust more slowly. Products like Evapo-Rust are designed for soaking items to gradually dissolve rust. While they require more patience, they are effective.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GH6Kz2HaF6E</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11342-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/iS8Cke3CLC4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply First Coat of Rust Remover to Saw Blade — Rust Removal</video:title>
      <video:description>Don safety glasses and protective gloves. Pour a small amount of the phosphoric acid-based rust remover (like SKJ Ospho) into a plastic container. Using a paint brush, apply an even coat of the rust remover to the heavily rusted surface of the metal item, ensuring good coverage. The product is thin, like water, and begins to loosen the rust upon application.</video:description>
      <video:player_loc>https://www.youtube.com/embed/iS8Cke3CLC4</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11343-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KuR98efywqQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Electrolytic Rust Removal — Rust Removal</video:title>
      <video:description>The disassembled large metal components are prepared for electrolytic rust removal. This involves setting up a glass tank, filling it with water, and adding washing soda to create an electrolyte solution. A sacrificial anode (a separate piece of iron/steel or rebar) is suspended in the solution, connected to the positive terminal of a DC power supply. The rusted parts are then submerged in the solution, connected to the negative terminal. The electrolysis process runs for approximately 6 hours, converting the rust into a black, easily removable residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KuR98efywqQ</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11343-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/TE9XiVbWumQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Electrolysis Rust Removal Setup — Rust Removal</video:title>
      <video:description>Create an electrolysis solution by mixing Arm &amp; Hammer Super Washing Soda with water in a jar and stirring. Insert a sacrificial steel rod (anode) and connect the positive (red) lead of a battery charger to it. Suspend the rusty spring (cathode) in the solution using a popsicle stick and connect the negative (black) lead to the spring. Ensure the anode and cathode do not touch.</video:description>
      <video:player_loc>https://www.youtube.com/embed/TE9XiVbWumQ</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11343-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oZOQgAS0cbc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Electrolysis — Rust Removal</video:title>
      <video:description>Once the circuit is correctly set up, plug in and turn on the DC power supply. You should observe bubbles forming on both the rusty object (cathode) and the sacrificial anode, indicating the start of the electrochemical reaction. Over time, the electrolyte solution will likely become discolored, turning murky yellow or brown, as rust is removed from the object and either dissolves or forms sludge, and particles may accumulate on the anode. The process can take anywhere from a few hours to a day or more, depending on the size of the object and the severity of the rust.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oZOQgAS0cbc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11344-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WGnI09nbSMA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Rinse, Dry, and Apply Protection — Rust Removal</video:title>
      <video:description>Upon completing the scrubbing, thoroughly rinse the tool with clean, fresh water to remove all traces of oxalic acid and any remaining loosened rust particles. It is highly recommended to neutralize any residual acid by briefly dipping the tool in a mild solution of baking soda and water (approximately 1 tablespoon of baking soda per liter of water), followed by a final rinse with clean water. This step helps prevent any lingering acid from continuing to react with the metal. Immediately and completely dry the tool using clean, lint-free cloths, paper towels, or compressed air to prevent &apos;flash rust&apos; from forming almost instantly on the freshly exposed metal. Finally, apply a protective coating such as mineral oil, camellia oil, or a specialized rust-inhibiting wax to shield the cleaned metal from moisture and oxygen, which are the primary causes of re-rusting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WGnI09nbSMA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11344-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m8_STIIF_x0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry the Metal Surfaces — Rust Removal</video:title>
      <video:description>Once the rinsing is complete, it&apos;s essential to dry the metal surfaces completely. The narrator advises using common household paper towels, folded to act as rags, to wipe away all the water from the treated areas. This prevents new rust from forming due to moisture and prepares the surface for subsequent steps.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m8_STIIF_x0</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11344-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/oZOQgAS0cbc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Derusted Object — Rust Removal</video:title>
      <video:description>Immediately after removal, spray the derusted metal object with clean water to rinse off the dark residue. While spraying, use a stiff brush to scrub away any remaining black film or loose particles from the surface. The action of the water and brushing will reveal the clean, bare metal underneath. Continue rinsing and scrubbing until the object is visibly clean and free of any residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/oZOQgAS0cbc</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11345-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/GH6Kz2HaF6E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Rust-Inhibiting Paint and Topcoat — Rust Removal</video:title>
      <video:description>To further prevent rust and ensure durability, apply a rust-inhibiting paint followed by a clear topcoat. After applying your desired color coat, allow it to dry completely according to manufacturer instructions. Once dry, spray on a clear topcoat. This final layer will protect the color coat, enhance its longevity, and provide an additional barrier against moisture and rust formation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/GH6Kz2HaF6E</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11345-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/vX9ioSDESzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Clear Coat — Rust Removal</video:title>
      <video:description>Once the tools are completely dry after 24 hours, arrange them in a cardboard box, ensuring they are not touching each other, to prepare for spray painting. Apply a Rust-Oleum Ultra Cover Satin Clear Spray over all the tools. Apply in light, even coats to avoid drips and ensure complete coverage. This clear coat will provide a protective barrier against future rust and maintain the etched appearance of the metal. Allow sufficient drying time between coats and for the final coat to cure according to the product instructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/vX9ioSDESzA</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11345-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FpzNXcoAv9Q/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Protective Coating/Paint — Rust Removal</video:title>
      <video:description>After the anti-rust agent has been properly applied and allowed to cure (as per manufacturer&apos;s instructions, though not explicitly shown in the video), a new white protective coating or paint is applied. This is demonstrated on a larger, flat metallic bar using a small paint roller. The roller ensures efficient and smooth coverage, transforming the previously rusted brown surface into a uniform, clean, and new-looking white finish. This step is highlighted as a way to avoid the expense of professional polishing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FpzNXcoAv9Q</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11332-1</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Treads — Stair Tread Installation</video:title>
      <video:description>Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11332-2</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Treads — Stair Tread Installation</video:title>
      <video:description>After the risers are installed, measure the depth and length of each individual stair tread. According to these measurements, cut your new hardwood treads. It&apos;s crucial to be accurate, as even small errors can lead to visible gaps. You may need to make slight adjustments to ensure a gap-free fit. A track saw, set at a 5-degree angle as demonstrated, can be particularly useful for making precise, straight cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11332-3</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6wRU8piN_z4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Measure Stairs — Stair Tread Installation</video:title>
      <video:description>Before beginning the installation, ensure your work area and existing stairs are clean. Always start the installation process with the bottom stair and work your way up the staircase. Using a tape measure, carefully measure the overall width and height of each individual stair. Once measured, cut your &apos;Performance Accessory stair tread&apos; to the correct depth, leaving an 1/8 inch space on the back side and a 1/16 inch gap on both sides of the tread. This precise cutting should be done for each individual stair to ensure a proper fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6wRU8piN_z4</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11337-1</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11337-2</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Stair Tread Installation</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11337-3</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/3C52iwS6dh4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install the First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Carefully peel off the protective backing from the adhesive side of the first stair tread. Align the tread precisely with the marks or template created in the previous step. Once aligned, firmly press the tread onto the stair surface, starting from one edge and working your way across, to ensure the adhesive makes full contact and eliminate any air bubbles.</video:description>
      <video:player_loc>https://www.youtube.com/embed/3C52iwS6dh4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11335-1</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cut Treads to Size — Stair Tread Installation</video:title>
      <video:description>Once measurements are taken and marked on the stair treads, use a miter saw to precisely cut them to the required width and depth. Ensure that the cuts are straight and clean for a professional finish. If the treads have a carpeted or fabric surface, you may need a sharp utility knife to score or cut through that material first, or ensure your saw blade is specifically designed for such materials to cut cleanly without fraying.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11335-2</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Stair Treads — Stair Tread Installation</video:title>
      <video:description>Each stair in a staircase is often slightly different in length, so it&apos;s crucial to measure and cut each new tread individually. Place an old, removed stair tread side-by-side with a new, uncut tread. Use the old tread as a template to mark the exact length needed on the new tread with a pencil. The presenter uses a circular saw for cutting; a table saw is another suitable option. When operating the circular saw, ensure both hands are firmly on the tool and your feet are well out of the way to prevent accidents, as this is a common point of injury.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11335-3</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repeat Measurement and Cutting for All Stairs — Stair Tread Installation</video:title>
      <video:description>Continue the measuring and cutting process for all remaining risers and treads on the staircase. It&apos;s crucial to measure and cut each piece individually, as stair dimensions can vary slightly. As a pro tip, mark each cut piece on the back (e.g., R1, T1, R2, T2) to easily identify its corresponding location during installation, preventing confusion and ensuring a perfect fit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11336-1</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit Laminate Pieces to Each Tread — Stair Tread Installation</video:title>
      <video:description>Prior to applying any adhesive, carefully place all the freshly cut laminate pieces, including both the nosing and the main tread pieces, onto their respective stair tread. This &apos;dry-fit&apos; allows you to ensure that all pieces fit perfectly. Visually inspect for tight seams, check for flush edges against the wall, and confirm proper alignment with the nosing. Make any necessary minor adjustments to the cuts at this stage before final installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11336-2</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — Stair Tread Installation</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11336-3</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11334-1</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Stair Tread Installation</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11334-2</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Cut Your Treads — Stair Tread Installation</video:title>
      <video:description>With the nosing removed, prepare the replacement treads for installation. Begin by measuring each tread individually using a tape measure, as stairway widths can vary from one step to the next. Mark the length that needs to be cut off using a sharpie or pencil. If the tread is a double return tread, you will not need to make any further cuts as it has been manufactured to your provided dimensions. As a pro tip, use a piece of scrap wood to push the tread out at the return area. This allows you to properly scribe the skirt before cutting, which will help give you an exact fit and cut for your tread. Use a miter saw to make the necessary cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11334-3</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Installation</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11333-1</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ZrWNkbh5j4M/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position Carpet Treads — Stair Tread Installation</video:title>
      <video:description>It is crucial to properly position each carpet tread on the hardwood stair for both safety and aesthetics. Ensure a gap of approximately 0.5 to 1 inch is left between the front edge of the carpet tread and the bullnose (the protruding front edge) of the stair. This gap is vital to prevent any tripping hazards when ascending or descending the stairs. For consistent alignment and ease of installation, butt the back edge of the carpet tread flush against the riser (the vertical part of the stair).</video:description>
      <video:player_loc>https://www.youtube.com/embed/ZrWNkbh5j4M</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11333-2</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Visualize Tread Size with Tape — Stair Tread Installation</video:title>
      <video:description>To ensure you are happy with the chosen carpet tread size, use painter&apos;s tape to outline the calculated width and depth on your actual stair treads. This allows you to visually account for elements like corner posts, spindles, and walls. If you find you want to see more carpet, you can adjust the tape outward and add a couple of inches to your order. Conversely, if you prefer to expose more wood, you can move the tape inward and make your tread smaller. This visual step is a reliable way to finalize your desired carpet stair tread dimensions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11333-3</loc>
    <lastmod>2026-11-13T19:04:14.256Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Stair Tread Installation</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-13T19:04:14.256Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11325-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xz34cA5dUeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Ground-Level Visual Inspection for Obvious Damage — Roof Inspection</video:title>
      <video:description>From a safe ground-level position, conduct a visual scan of the entire roof surface. Look for any areas that appear distinctly different in color or texture. Pay close attention to inconsistencies across the shingle layout. The video specifically points out lighter-colored areas on the roof, which are often indicators of significant wear or missing material.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xz34cA5dUeQ</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11325-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nt39D3c2-p4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Initial Visual Roof Inspection — Roof Inspection</video:title>
      <video:description>Begin by assessing the general condition of the roof from your safe vantage point. Look for missing or broken shingles and tiles, and check for excessive wear at the corners and peaks of the roof. Pay close attention to the flashing around chimneys and roof vents, ensuring they are intact and properly sealed, typically with roofing tar. Rotting fascia board on the exterior of the house can indicate water damage from improper roof drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nt39D3c2-p4</video:player_loc>
      <video:duration>41</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11325-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WJRMVIDNJGE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Initial Visual Inspection for Shingle and Granule Damage — Roof Inspection</video:title>
      <video:description>After a severe storm, conduct a visual inspection of your home&apos;s exterior from the ground. Walk around your home and carefully look for any shingles that are missing, lifted, or appear out of place. Also, check your splash blocks (the plastic or concrete pieces that divert water from downspouts) for an accumulation of granules, which are small, abrasive particles that protect asphalt shingles from the elements. A significant amount of granules can indicate shingle damage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WJRMVIDNJGE</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11326-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/uhaO2uyVWdU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Gutters and Downspouts — Roof Inspection</video:title>
      <video:description>From the ladder or a safe, clear portion of the roof, inspect the gutters and downspouts. Look for indications of leaf material, debris, or other blockages. The presence of sticks or leaves sticking out is a clear sign that the gutters need to be cleaned. Also, observe any ice formation, especially large ice dams or icicles coming from behind the gutters, which can indicate poor drainage or insulation issues. Document these observations with photos.</video:description>
      <video:player_loc>https://www.youtube.com/embed/uhaO2uyVWdU</video:player_loc>
      <video:duration>28</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11326-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/kB-Z2_GuM7k/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect Gutter Outlets and Downspouts — Roof Inspection</video:title>
      <video:description>Proceed to inspect the gutter outlets and the attached downspouts for additional signs of wear and damage. Look specifically for rust at the gutter outlets, as these areas are prone to corrosion due to constant water exposure. Extend the inspection to the square downspouts, checking for any leaks. The video highlights how all outlets are rusted out and that the square downspouts are actively leaking, with visible water streaming down the side of the house. Identify any water streaks or discoloration on the siding below the downspouts, which could indicate past or ongoing leaks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/kB-Z2_GuM7k</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11326-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_Ug575_4riU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Gutters and Downspouts — Roof Inspection</video:title>
      <video:description>Ensure your gutters and downspouts are clear of leaves, toys, or any other debris. Clogged gutters can cause water to overflow and damage your home&apos;s foundation, siding, or roof.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_Ug575_4riU</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11327-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wgkEFfuPoIw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform a Thorough Roof Inspection — Roof Inspection</video:title>
      <video:description>Once safely on the roof, conduct a thorough visual and tactile inspection to identify any existing or potential damage. This involves checking for &apos;nail pops&apos; where nails have lifted through the shingles, signs of previous or current wind damage such as missing or uplifted shingles, and the condition of the gutters (looking for fullness or sagging). Critically, inspect the chimney for any structural issues like loose or crumbling bricks and mortar, as these can be significant sources of leaks even if unrelated to the roofing material itself. Document all findings to clearly communicate issues to the homeowner.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wgkEFfuPoIw</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11327-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HrdVa12EHas/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Overall Roof Condition Assessment — Roof Inspection</video:title>
      <video:description>Walk along the roof ridges and visually scan the entire roof surface to get an overall sense of its condition. Look for obvious signs of aging, such as widespread granule loss, curled or cracked shingles, and any missing shingles. This initial scan helps prioritize areas for closer inspection.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HrdVa12EHas</video:player_loc>
      <video:duration>20</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11327-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0TTkxuloZWY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Asphalt Shingle Condition — Roof Inspection</video:title>
      <video:description>Walk across the roof, carefully inspecting the asphalt shingles. Look for signs of wear, such as shingles that appear &apos;shiny&apos; indicating exposed fiberglass where granules have worn off. Note any areas with excessive granule loss, which often accumulates in gutters. Check for cracked, curled, buckled, or missing shingles. Pay particular attention to the north-facing side of the roof, as it tends to show wear (and hail damage, if any) more prominently due to less sun exposure and slower drying.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0TTkxuloZWY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11328-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0TTkxuloZWY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Asphalt Shingle Condition — Roof Inspection</video:title>
      <video:description>Walk across the roof, carefully inspecting the asphalt shingles. Look for signs of wear, such as shingles that appear &apos;shiny&apos; indicating exposed fiberglass where granules have worn off. Note any areas with excessive granule loss, which often accumulates in gutters. Check for cracked, curled, buckled, or missing shingles. Pay particular attention to the north-facing side of the roof, as it tends to show wear (and hail damage, if any) more prominently due to less sun exposure and slower drying.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0TTkxuloZWY</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11328-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I-sLCkrgSfY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Detailed Shingle and Flashing Inspection — Roof Inspection</video:title>
      <video:description>Perform a detailed inspection of the roof shingles for any signs of wear, such as granule loss. Examine the flashings at the ridge line for exposed nails, ensuring they are properly set and sealed. Continue to inspect other roof penetrations, including HVAC vents and skylights, checking their flashings for exposed nails, gaps, and cracks. For any issues identified, such as popping nails or large gaps in flashing, recommend evaluation and repair by a qualified roofer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I-sLCkrgSfY</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11328-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xz34cA5dUeQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Examine for Missing Shingle Tabs and Granular Loss — Roof Inspection</video:title>
      <video:description>Focus on the light-colored areas identified during the initial scan. These typically indicate where the protective granular surface of the asphalt shingles has worn away or where entire shingle tabs have detached. The video shows several such areas, highlighting the exposure of the underlying felt or asphalt, which compromises the roof&apos;s waterproofing capabilities. Also, look for actual pieces of shingles or granules that have fallen off and are visible on the ground, in gutters, or on nearby branches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xz34cA5dUeQ</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11329-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I5nOQEX2xrM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Check for Ridge Vents — Roof Inspection</video:title>
      <video:description>Now, shift your focus to the ridge lines of your roof, especially on smaller, isolated roof sections that might cover small attic areas. The video highlights a critical issue: the absence of an upper ridge vent on such a section. Ridge vents are the exhaust component of an attic ventilation system, allowing hot, moist air to escape. Without them, even with functional soffit vents (intake), air circulation is severely restricted, trapping heat and moisture in the attic. Look for continuous ridge vents along the highest points of the roof; if absent on a sloped roof section, it&apos;s a significant concern.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I5nOQEX2xrM</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11329-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qpV_S00zIFk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Ridge Vent and Prepare for Repair — Roof Inspection</video:title>
      <video:description>Begin by assessing the ridge vent to identify the problem. The presenter notes a visible gap caused by a backward-installed Owens Corning Deckow Ridge vent. The correct installation requires the &apos;factory edge&apos; (a solid, sealed side) to face downwards to prevent insects from entering. This method can also be applied for replacing missing ridge cap shingles. Before starting work, ensure all necessary tools and safety equipment are gathered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qpV_S00zIFk</video:player_loc>
      <video:duration>38</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11329-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/I-sLCkrgSfY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Detailed Shingle and Flashing Inspection — Roof Inspection</video:title>
      <video:description>Perform a detailed inspection of the roof shingles for any signs of wear, such as granule loss. Examine the flashings at the ridge line for exposed nails, ensuring they are properly set and sealed. Continue to inspect other roof penetrations, including HVAC vents and skylights, checking their flashings for exposed nails, gaps, and cracks. For any issues identified, such as popping nails or large gaps in flashing, recommend evaluation and repair by a qualified roofer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/I-sLCkrgSfY</video:player_loc>
      <video:duration>99</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11330-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jtbCZcmhajw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Evaluate Flashing Condition — Roof Inspection</video:title>
      <video:description>Carefully check the condition of the flashing around key roof penetrations, such as chimneys and roof vents (leading out of the attic). The video shows various examples of flashing around chimneys and green/brown vent pipes. Ensure that these flashing components appear to be in good condition, without cracks, tears, or signs of deterioration. In most cases, these areas should be adequately sealed with roofing tar. However, some metal flashing designs are sufficient on their own and may not require additional tar, as shown with a perfectly sealed brown metal flashing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jtbCZcmhajw</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11330-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Qw-qIFfLKEg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Examine Roof Flashing and Penetrations — Roof Inspection</video:title>
      <video:description>Inspect all flashing points on the roof, as these are critical areas for preventing leaks. Examine the flashing around the chimney, pipe vents, and in roof valleys. Look for signs of inadequate or old flashing, such as thin, mill-finished flashing that has been improperly bent or installed. Ensure the flashing is correctly integrated behind siding or under shingles, rather than just being face-nailed. For pipe boots, check for cheap plastic materials and that shingles are properly cut and extend around the boot, with no nails placed in areas where water will run off. Confirm that the flashing is not just shingle pieces thrown in without proper sealing, which allows water to penetrate underneath.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Qw-qIFfLKEg</video:player_loc>
      <video:duration>198</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11330-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NB45alz-QMw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Chimney &amp; Wall Flashing Inspection — Roof Inspection</video:title>
      <video:description>Focus on the intersection where the roof meets any vertical walls, such as siding or a chimney. Inspect the existing counter flashing and step flashing for proper integration with both the roof shingles and the vertical surface. Look for any visible gaps, unsealed channels, or areas where the flashing is not adequately directing water away from the wall. Pay close attention to the base of the chimney where it meets the roofline, as this is a common area for leaks. The inspector notes gaps in the counter flashing where water could run directly into the structure.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NB45alz-QMw</video:player_loc>
      <video:duration>80</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11331-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wgkEFfuPoIw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Document Findings with Photos and Videos — Roof Inspection</video:title>
      <video:description>Capture comprehensive photographic and video evidence of all identified damage and critical areas observed during the roof inspection, including the overall roof condition, gutters, and chimney. It is highly recommended to record a video while verbally stating the property address, town, and the current date and time. This timestamped documentation serves as a robust record, ensuring transparency with the client and protecting the contractor from potential disputes or claims of fabricated damage, which can sometimes be encountered with less reputable roofers. This detailed visual evidence is also invaluable for internal production planning and job scheduling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wgkEFfuPoIw</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11331-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9YDrWHJbhO4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Document Findings and Seek Professional Advice — Roof Inspection</video:title>
      <video:description>Once you have identified and marked all potential hail damage spots, take clear and well-lit photographs of each marked area. These photographs will be crucial for documenting the damage. If you have found significant damage or if an insurance company previously denied your claim despite evidence, consider contacting a professional roofing contractor. They can provide a second, expert opinion, confirm the extent of the damage, and assist with the insurance claim process, including sending documented photos to your insurance company. This is especially important if neighboring roofs were approved for damage, as it suggests your area was impacted.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9YDrWHJbhO4</video:player_loc>
      <video:duration>120</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11331-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HrdVa12EHas/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Document Damage and Accessories — Roof Inspection</video:title>
      <video:description>After identifying all areas of damage and noting all roof accessories, systematically document the findings. Use chalk to clearly label each side of the roof (East, North, South, West). For each side, count and write down the number of wind-damaged shingles. Additionally, count and list all accessories, such as plumbing boots (PB), HVAC stacks (HVAC), satellite dishes (DISH), and power vents (PV). This detailed marking and counting provide a clear visual record and accurate numbers for an estimate.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HrdVa12EHas</video:player_loc>
      <video:duration>138</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11317-1</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Stair Tread Installation</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11317-2</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Tread and Nosing — Stair Tread Installation</video:title>
      <video:description>With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11317-3</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — Stair Tread Installation</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11324-1</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ztC3KfZEjO0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Construction Adhesive — Stair Tread Installation</video:title>
      <video:description>Before installing the newly cut tread, a generous bead of construction adhesive is applied to the horizontal wood supports (ledgers) within the stair frame where the tread will rest. This adhesive (a caulk gun loaded with a tube of adhesive is shown) serves two primary purposes: to firmly bond the tread to the frame and to prevent future squeaks that can arise from wood-on-wood friction as the stairs are used. The adhesive is applied to all contact points, including the vertical stringer/riser faces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ztC3KfZEjO0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11324-2</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4fML3-Qwo_c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Wood Flooring Adhesive — Stair Tread Installation</video:title>
      <video:description>Before installing each piece, generously apply a specialized wood flooring adhesive, such as Bostik&apos;s Best, to the clean stair subfloor. Use a notched trowel to spread the adhesive evenly across the surface. The notched trowel creates ridges that ensure adequate adhesive transfer and proper bonding when the wood is laid. Apply enough adhesive to cover the entire area where the new wood tread or riser will sit.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4fML3-Qwo_c</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11324-3</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Construction Adhesive to Stair Treads — Stair Tread Installation</video:title>
      <video:description>Once you have confirmed that all laminate pieces fit perfectly during the dry-fit, remove them from the stair tread. Then, using a caulk gun, apply a generous amount of construction adhesive to the entire surface of the existing stair tread. Distribute the adhesive in a wavy or serpentine pattern to ensure good coverage. Pay particular attention to the edges and the area where the nosing will sit, as these areas require a strong bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11321-1</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fit Tread and Nosing — Stair Tread Installation</video:title>
      <video:description>Once the stair tread and nosing pieces are cut, bring them back to the stairs for a dry fit. Place them into their final positions without adhesive to ensure all cuts are perfect and the pieces fit snugly against the riser and along the stair&apos;s edges. Make any necessary micro-adjustments at this stage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11321-2</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1zDgEcG9ENk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry-Fit Laminate Pieces to Each Tread — Stair Tread Installation</video:title>
      <video:description>Prior to applying any adhesive, carefully place all the freshly cut laminate pieces, including both the nosing and the main tread pieces, onto their respective stair tread. This &apos;dry-fit&apos; allows you to ensure that all pieces fit perfectly. Visually inspect for tight seams, check for flush edges against the wall, and confirm proper alignment with the nosing. Make any necessary minor adjustments to the cuts at this stage before final installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1zDgEcG9ENk</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11321-3</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit and Adjust Treads — Stair Tread Installation</video:title>
      <video:description>Once a new stair tread has been cut, take it inside and test its fit on the corresponding stair. Place it gently into position to check for proper length and alignment. The presenter found that some of her cuts, made conservatively, were still slightly too long. If a tread doesn&apos;t fit perfectly, take it back to your cutting area and trim off just a tiny bit more to achieve a snug fit, then re-test.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11323-1</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test Fit and Adjust Treads — Stair Tread Installation</video:title>
      <video:description>Once a new stair tread has been cut, take it inside and test its fit on the corresponding stair. Place it gently into position to check for proper length and alignment. The presenter found that some of her cuts, made conservatively, were still slightly too long. If a tread doesn&apos;t fit perfectly, take it back to your cutting area and trim off just a tiny bit more to achieve a snug fit, then re-test.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11323-2</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6RyKuAZtIzA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Plan Tread Placement — Stair Tread Installation</video:title>
      <video:description>Begin by preparing your wooden staircase, ensuring it is clean and free of any dust, debris, or old adhesive residue. Take a pre-made stair tread and place it on each step to determine the proper fit and alignment. Use a measuring tape to note any necessary cuts for width or depth, accounting for the nose of the stair. It&apos;s often beneficial to dry-fit all treads before applying any adhesive to ensure a good layout, identify any custom cuts needed for irregular steps, and confirm the aesthetic arrangement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6RyKuAZtIzA</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11323-3</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/1KWo6xmAbSA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dry Fit Tread and Nosing — Stair Tread Installation</video:title>
      <video:description>Once the stair tread and nosing pieces are cut, bring them back to the stairs for a dry fit. Place them into their final positions without adhesive to ensure all cuts are perfect and the pieces fit snugly against the riser and along the stair&apos;s edges. Make any necessary micro-adjustments at this stage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/1KWo6xmAbSA</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11319-1</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hVs1YaoZyKA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure New Treads with Screws — Stair Tread Installation</video:title>
      <video:description>Once the adhesive is applied, place the new tread onto the stringers, pushing it down firmly into the bead of adhesive. Ensure there is a small 1/8-inch gap between the new tread and any adjacent boards for proper expansion and drainage. For fasteners, always use screws rather than nails, as they provide a much tighter and more durable hold. Specifically, use 2.5-inch exterior-grade screws. Using a Hitachi drill, pre-drill pilot holes with an 1/8-inch bit, carefully lining them up with the center of the stringer to prevent splitting the wood. Then, use a DeWalt impact driver to drive the screws in, countersinking the head slightly so it&apos;s flush or just below the surface of the tread. For the front edge of the board, where the stringer&apos;s wood grain might be weak or &apos;sketchy,&apos; it is often better to put a screw down into the riser below instead of directly into the stringer end. Line it up by eye, pre-drill with the 1/8-inch bit, and then drive the screw in with the impact driver, countersinking it as before. Repeat this fastening process for each stringer contact point and for the front edge of each new tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hVs1YaoZyKA</video:player_loc>
      <video:duration>51</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11319-2</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ztC3KfZEjO0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure Tread with Fasteners — Stair Tread Installation</video:title>
      <video:description>With the tread firmly seated on the adhesive, a pneumatic nail gun (Paslode brand is shown) is used to fasten the tread permanently. Nails are driven through the front edge of the tread into the underlying ledger/riser structure. Additionally, nails (or screws, as mentioned by the presenter) are installed from the back of the riser into the back edge of the tread to create a robust and squeak-free connection. This dual fastening method ensures maximum stability.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ztC3KfZEjO0</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11319-3</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Secure New Stair Treads — Stair Tread Installation</video:title>
      <video:description>To permanently secure the new stair treads, first apply an adhesive like liquid nails to the stair stringers (the support beams) where the tread will rest. Use a caulk gun to apply an even bead of the adhesive. Then, carefully place the new tread onto the stringers, ensuring it is flush and properly aligned. Finally, use a nail gun to fasten the tread securely by driving nails into the sides of the stair structure, typically into the stringers and risers, creating a strong bond.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11322-1</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hOcPPO4LRfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Custom Tread Templates — Stair Tread Installation</video:title>
      <video:description>New stair treads typically come as 1x12 red oak boards, ¾ inch thick and 11 ½ inches wide. Since these might be too wide, they need to be cut down from the back to maintain the pre-formed nosing on the front. Because the space between the skirt boards may not be perfectly square or parallel, a custom template is required for each tread. Begin by taking an old, cut-down tread that fits loosely in the opening and placing a piece of paper (or cardboard) on top. Mark a reference line on the riser. Then, use a small combination square or a piece of straight metal/wood as a guide to trace the contours of the skirt board onto the paper, keeping the guide tight against the skirt board. Slide the guide along the length of the paper, making continuous pencil lines at each end and several points in between, ensuring the lines are not bridged by any dips in the wall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hOcPPO4LRfI</video:player_loc>
      <video:duration>194</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11322-2</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for Second Winder Step — Stair Tread Installation</video:title>
      <video:description>Repeat the templating process for the next winder step using a fresh piece of kraft paper. This involves aligning the paper, securing it with staples, folding it around the nosing and side edges, and cutting it to the exact shape of the step. As with the previous template, mark the runner&apos;s width, center line, and straight edges. Crucially, ensure that the measurements (e.g., 28 inches wide) for the runner remain consistent across all winder steps to maintain a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11322-3</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hwZQcHGafM0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark Tread Dimensions for Curved Sections — Stair Tread Installation</video:title>
      <video:description>After placing the pre-cut nosing in position, the installer makes new marks along the edges where the tread will meet the wall and the nosing. He uses a measuring tape to measure the dimensions, such as 5 inches on one side and 10 and 5/8 inches on the other, for the long board. To ensure a straight cut line between these two points, he applies diagonal tape and then marks the line with a pencil using a beam level as a guide. This method helps account for any irregularities in the wall or the staircase itself.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hwZQcHGafM0</video:player_loc>
      <video:duration>269</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11320-1</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/mjZqhxztKJ8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Inspection and Cleanup — Stair Tread Installation</video:title>
      <video:description>After the adhesive has fully cured and all wooden coverings are securely in place, carefully remove all temporary weights from the stair treads and landing panels. Inspect the entire staircase for any loose areas, gaps, or imperfections. Clean up any sawdust, adhesive residue, or debris, using a broom or vacuum cleaner, to reveal the finished wooden staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/mjZqhxztKJ8</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11320-2</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Repair and Clean Up — Stair Tread Installation</video:title>
      <video:description>After all the new treads are installed, inspect the surrounding painted surfaces (like stringers and risers) for any scrapes or damage that occurred during the installation. Use spackle, such as DAP Fast Dry Premium Spackling, to fill any small holes or imperfections. Once dry, sand smooth, re-paint the repaired areas, and thoroughly clean the newly installed treads to remove any dust or debris. This completes the renovation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11320-3</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/2rkFnsTztog/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Caulk and Finish Seams — Stair Tread Installation</video:title>
      <video:description>Once the adhesive has fully cured, remove all blue painter&apos;s tape. Apply a small bead of caulk to any visible seams between the riser and the tread, and along the side stringers if needed. Spray the freshly applied caulk lightly with a mixture of water and denatured alcohol (or soapy water). This prevents the caulk from sticking to surfaces you don&apos;t want it to. Smooth the caulk with your finger, then immediately wipe away any excess with a damp rag for a clean finish.</video:description>
      <video:player_loc>https://www.youtube.com/embed/2rkFnsTztog</video:player_loc>
      <video:duration>54</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11318-1</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Position and Secure Tread — Stair Tread Installation</video:title>
      <video:description>Align the stair tread carefully on the wooden stair, making sure it is centered and straight relative to the edge of the step. Once you are satisfied with the positioning, press down firmly on the area where the first adhesive strip was exposed to secure that edge of the tread. Then, reach under the tread, if possible, or gently lift the unadhered portion, and peel off the second protective paper strip from the remaining adhesive backing.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11318-2</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11318-3</loc>
    <lastmod>2026-10-24T23:25:35.571Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-H6_Llb_tnc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stair Treads — Stair Tread Installation</video:title>
      <video:description>Starting from the top of the staircase, the homeowner carefully installs each stair tread. She begins by peeling off the protective plastic film from the adhesive backing. The tread is then aligned precisely with the previously marked tape lines, ensuring the back edge is flush with the riser. Once aligned, she firmly presses the tread onto the step, making sure it adheres well, especially over the bullnose (the rounded edge of the step). This process is repeated for each individual stair tread and for the larger custom pieces on the landings. The homeowner notes that the adhesive is designed not to damage the existing hardwood stairs, making it a suitable option for temporary or non-permanent installations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-H6_Llb_tnc</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-10-24T23:25:35.571Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11311-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ALmNoUoPh1I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare Safety Gear and Chainsaw — Tree Removal</video:title>
      <video:description>Before any cutting begins, put on all necessary personal protective equipment (PPE). This includes a hard hat with integrated ear protection and a face shield, an orange high-visibility jacket with reflective strips (Husqvarna brand visible), chainsaw protective pants (chaps), and sturdy boots. Once geared up, start the chainsaw (Stihl brand) and allow it to warm up. This ensures the chainsaw is operating correctly and safely before making any cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ALmNoUoPh1I</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11311-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rEgqBClTotQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare and Start Chainsaw — Tree Removal</video:title>
      <video:description>Begin by ensuring you are wearing all necessary personal protective equipment (PPE), which includes a hard hat with integrated ear protection and a face shield, safety glasses, a high-visibility shirt for visibility, chainsaw protective pants (chaps) to protect your legs, and heavy-duty gloves for hand protection and grip. Once fully geared up, start your chainsaw and perform a quick check to ensure it is in good working order. Crucially, before making any cuts, take time to assess the tree&apos;s natural lean, identify any nearby obstacles (like power lines or structures), determine the safest felling direction, and plan and clear a clear escape route away from the tree&apos;s anticipated fall path.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rEgqBClTotQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11311-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/aiICx5ecVKw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wear Essential Safety Gear — Tree Removal</video:title>
      <video:description>Before beginning any chainsaw work, ensure you are wearing absolutely essential safety gear. This includes a safety helmet with a face shield, hearing protection, safety gloves, chainsaw chaps (or protective trousers), and sturdy work boots. This gear protects against flying debris, noise damage, cuts, and falling objects, which are common hazards in tree cutting.</video:description>
      <video:player_loc>https://www.youtube.com/embed/aiICx5ecVKw</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11312-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/USDA_7uLocs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create the Directional Notch — Tree Removal</video:title>
      <video:description>Determine the desired direction of fall for the tree. On that side, create a directional notch (also known as a felling notch or face cut). This involves two cuts: an angled top cut extending about 1/3 to 1/4 of the way into the tree&apos;s diameter, followed by a horizontal bottom cut that meets the end of the top cut precisely. This removes a wedge of wood. The video shows the operator using a chainsaw (Stihl) to make these precise cuts, ensuring the notch faces the intended direction of fall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/USDA_7uLocs</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11312-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/6ZlEA7JyD7E/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Execute Directional Notch Cut — Tree Removal</video:title>
      <video:description>Using a chainsaw, create the directional notch (also known as a face cut or hinge cut) on the side of the tree that faces the intended felling direction, as indicated by the red target and green line in the video. This notch typically consists of two cuts: a horizontal cut made first, followed by an angled cut that meets the horizontal cut, removing a wedge of wood. The depth of this notch should be approximately one-fifth to one-third of the tree&apos;s diameter. The integrity and precision of this notch are crucial for controlling the tree&apos;s fall.</video:description>
      <video:player_loc>https://www.youtube.com/embed/6ZlEA7JyD7E</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11312-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/U7VNizokMew/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Directional Notch — Tree Removal</video:title>
      <video:description>The first step is to create a directional notch on the side of the tree where you want it to fall. Using a chainsaw, make a horizontal cut roughly one-third to one-half of the way into the tree trunk. Then, make a second angled cut from above, meeting the horizontal cut to remove a wedge-shaped piece of wood. This notch acts as a hinge and dictates the tree&apos;s fall direction.</video:description>
      <video:player_loc>https://www.youtube.com/embed/U7VNizokMew</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11313-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QEQaVSFdSzY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform the Back Cut — Tree Removal</video:title>
      <video:description>After completing the directional notch, the operator begins the back cut on the opposite side of the tree trunk. This cut is made horizontally, slightly above the level of the notch&apos;s base, and is typically not cut completely through the tree. The intention is to leave a &apos;hinge&apos; of wood between the back cut and the notch, which acts as a pivot point for the tree&apos;s fall. The operator makes several passes, checking the stability of the tree.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QEQaVSFdSzY</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11313-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ALmNoUoPh1I/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform the Back Cut and Create the Hinge — Tree Removal</video:title>
      <video:description>Move to the opposite side of the tree from the felling notch. Make a back cut, starting slightly higher than the horizontal cut of the felling notch, and cutting towards the notch. Do not cut completely through the tree. Leave a &apos;hinge&apos; of uncut wood between the back cut and the felling notch. This hinge is crucial; it acts as a pivot, guiding the tree&apos;s fall and preventing it from kicking back or splitting. The width and integrity of this hinge are vital for controlled felling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ALmNoUoPh1I</video:player_loc>
      <video:duration>57</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11313-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QIK6s92KKUw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Make the Back Cut — Tree Removal</video:title>
      <video:description>Move to the opposite side of the tree from the directional notch. Make a horizontal back cut (also known as the felling cut) about 1 to 2 inches above the horizontal cut of the directional notch. This offset helps create a stronger hinge. Cut towards the notch, but do not cut all the way through; stop about 10% of the tree&apos;s diameter before reaching the notch. Leave a hinge of wood between the back cut and the notch. This hinge is crucial for controlling the tree&apos;s fall and preventing it from splitting prematurely or falling backward. The video shows the operator performing this cut carefully.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QIK6s92KKUw</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11314-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JycC5cMvgu8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Monitor Tree Fall and Clear — Tree Removal</video:title>
      <video:description>Once the back cut is complete and the tree begins to fall, immediately step back along your planned escape route. Observe the tree&apos;s path until it safely reaches the ground. After the tree has fallen, ensure the area is clear and safe before approaching the downed tree. The video shows the tree successfully on the ground, away from any immediate obstructions.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JycC5cMvgu8</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11314-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/eH0yf7Q59p0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Retreat and Observe Tree Fall — Tree Removal</video:title>
      <video:description>As the tree begins to fall, immediately remove the chainsaw from the cut, engage the chain brake, and retreat along your pre-planned escape path. Do not take your eyes off the falling tree. Observe its trajectory and ensure it falls safely in the intended direction. Wait until the tree has fully settled on the ground before approaching it. The video shows the tree falling cleanly in the direction the feller was facing, away from the path the feller was standing on.</video:description>
      <video:player_loc>https://www.youtube.com/embed/eH0yf7Q59p0</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11314-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nw0xjvFrMp4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Felling the Tree and Retreating — Tree Removal</video:title>
      <video:description>Once the back cut is almost complete, the tree will begin to move. As it starts to fall, immediately remove the chainsaw and retreat along one of your predetermined escape routes. Keep your eyes on the tree and its surroundings as it falls to ensure no unexpected branches break or other hazards arise. Wait until the tree has settled completely on the ground before approaching.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nw0xjvFrMp4</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11315-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9PLgdKWSh-U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Delimb and Buck the Fallen Tree — Tree Removal</video:title>
      <video:description>Once the tree has fallen, begin the process of limbing, which involves removing all the branches from the main trunk. Always position yourself on the &apos;uphill&apos; side of the tree trunk if working on uneven ground. This prevents the trunk from rolling towards you unexpectedly. Use the chainsaw to cut branches, being mindful of any tension that might cause them to spring back. After limbing, cut the main trunk into smaller, manageable sections, a process known as bucking. These sections can then be used for firewood or loaded onto a trailer for disposal.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9PLgdKWSh-U</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11315-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/AlQh-IUhvwE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Limb and Buck the Fallen Tree — Tree Removal</video:title>
      <video:description>After the tree has fallen safely, the next steps are &apos;limbing&apos; and &apos;bucking.&apos; Limbing involves removing all the branches from the main trunk. Work methodically from the base of the trunk towards the top, being cautious of branches under tension that might spring back (&apos;springpoles&apos;). Once limbed, &apos;buck&apos; the main trunk by cutting it into smaller, manageable sections or logs. Determine the desired length for these logs based on your needs (e.g., firewood, milling). Ensure the trunk is stable and supported to prevent the chainsaw bar from pinching during cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/AlQh-IUhvwE</video:player_loc>
      <video:duration>83</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11315-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/NXMmm77kkVE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Limb and Buck Fallen Trees — Tree Removal</video:title>
      <video:description>When a tree is already on the ground, the process involves two main techniques: &apos;limbing&apos; and &apos;bucking&apos;. Limbing means removing the smaller branches or limbs from the base of the tree trunk. Work carefully from the base, cutting the limbs. You can use a &apos;pulling chain&apos; technique (cutting downward) or a &apos;pushing chain&apos; technique (cutting upward). After limbing, &apos;bucking&apos; involves cutting the main trunk into manageable sections. Utilize offsetting cuts to prevent the chainsaw chain from binding in the wood. Limbs on the underside can be cut if you have a good working height and adequate support for the log.</video:description>
      <video:player_loc>https://www.youtube.com/embed/NXMmm77kkVE</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11316-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hWpcc1lHAyA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Site Cleanup and Wood Storage — Tree Removal</video:title>
      <video:description>After the entire tree has been removed and the stump ground, the site is completely cleared of all wood chips, small branches, and debris. The larger trunk sections, cut into manageable lengths, are left on-site to be split into firewood. This provides a clean, safe, and open area where the hazardous tree once stood, with a new supply of wood for heating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hWpcc1lHAyA</video:player_loc>
      <video:duration>56</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11316-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ymQGyC60vr4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Process Remaining Debris and Clean Up — Tree Removal</video:title>
      <video:description>The remaining smaller branches and debris that were not burned are further processed. Some thicker branches are chopped into smaller pieces with an axe, while others are collected into a wheelbarrow to be transported. Sawdust and small wood chips scattered on the ground are then cleared using a Stihl backpack leaf blower to clean up the work area. The processed logs are neatly stacked near the fire.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ymQGyC60vr4</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11316-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/dTCVAohf61U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Cleanup and Demobilization — Tree Removal</video:title>
      <video:description>After all tree sections are removed and processed, the crew begins the cleanup phase. This involves raking remaining small debris, ensuring all wood chips are contained, and preparing the equipment for transport. The ground mats are carefully removed and stacked onto the crane truck. All tools are accounted for and secured. The job concludes with a final inspection of the work area to ensure it is clean and safe.</video:description>
      <video:player_loc>https://www.youtube.com/embed/dTCVAohf61U</video:player_loc>
      <video:duration>58</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11309-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/yqxK5AdXw_0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Felling Zone and Hazards — Tree Removal</video:title>
      <video:description>Before making any cuts on the main tree, conduct a thorough assessment of the felling zone. This involves identifying potential hazards such as nearby buildings, fences, or other valuable objects that could be damaged. Use an aerial perspective (as shown in the video&apos;s drone footage) if possible, or carefully walk around the tree to determine the safest and most optimal felling direction. The video highlights a situation with &apos;no room for error&apos; due to surrounding structures.</video:description>
      <video:player_loc>https://www.youtube.com/embed/yqxK5AdXw_0</video:player_loc>
      <video:duration>27</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11309-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/L6g_KpERgQg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Tree Assessment and Safety Preparation — Tree Removal</video:title>
      <video:description>Before beginning any cutting, thoroughly inspect the dead tree. Observe its height, diameter, and the extent of decay, as indicated by the peeling bark and hollowed-out sections. Identify the direction of the lean, if any, and plan the safest felling direction, considering potential hazards like nearby buildings or other trees. Assess the surrounding terrain and clear any obstacles that might impede the fall or the arborist&apos;s movement. Ensure all necessary personal protective equipment (PPE) is worn, including a safety helmet with ear protection and face shield, safety glasses, high-visibility clothing, and chainsaw protective chaps/trousers.</video:description>
      <video:player_loc>https://www.youtube.com/embed/L6g_KpERgQg</video:player_loc>
      <video:duration>33</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11309-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qSNp_GBGK8A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Tree and Plan Fall Direction — Tree Removal</video:title>
      <video:description>Before beginning any cutting, thoroughly assess the tree&apos;s natural lean, the surrounding area, and potential obstacles. Identify the safest and most efficient direction for the tree to fall. This involves observing other trees, power lines, structures, and potential escape routes. The felling lever can be used to help determine the natural lean and desired fall direction. Mark the intended felling direction on the tree&apos;s trunk using an easily visible marker, such as marking paint or flagging tape, to ensure both operators are clear on the target.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qSNp_GBGK8A</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11310-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c4A3gSWyoNM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess Tree and Plan Felling Direction — Tree Removal</video:title>
      <video:description>Begin by thoroughly assessing the spruce tree to be felled. Observe its natural lean and determine the safest and most efficient felling direction, taking into account any nearby structures, roads, or obstacles. In this video, the tree has a natural curve, which necessitates careful planning and the use of a tree jack. The desired felling direction is towards the road, which will need to be cleared post-felling. Identify the height at which the directional notch will be cut on the trunk.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c4A3gSWyoNM</video:player_loc>
      <video:duration>69</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11310-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/DBYxe1xzmV4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Face Cut — Tree Removal</video:title>
      <video:description>Begin by assessing the tree and the desired direction of fall. Make a large, deep notch (approximately a quarter of the tree&apos;s diameter) on the side of the tree facing the intended direction of fall. This is the &apos;face cut&apos; or &apos;directional notch&apos; and consists of two cuts: a horizontal cut and a diagonal cut, meeting to remove a wedge of wood. Ensure the area around the tree is clear of people and obstacles before starting any cuts. The initial cut shown is deep, aiming to create a substantial hinge for controlled felling.</video:description>
      <video:player_loc>https://www.youtube.com/embed/DBYxe1xzmV4</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11310-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/c4A3gSWyoNM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Perform Back Cut and Initiate Felling — Tree Removal</video:title>
      <video:description>After creating the directional notch, move to the opposite side of the tree trunk. Begin making the back cut (felling cut) horizontally, slightly above the bottom cut of the directional notch. As the back cut progresses, activate the mechanical tree jack to apply controlled pressure, pushing the tree in the planned direction. Continue cutting and applying pressure with the jack until the tree starts to lean and then falls in the desired direction. Ensure the hinge created by the notch guides the fall and prevents uncontrolled movement. The tree should fall cleanly and safely.</video:description>
      <video:player_loc>https://www.youtube.com/embed/c4A3gSWyoNM</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11307-1</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Order Winder Steps and Extensions — Winder Step Measurement</video:title>
      <video:description>Begin by determining the necessary number of winder steps and winder step extensions for your landing area. To do this, measure the depth of your landing area from the back wall to the front edge. To this measurement, add 30 millimeters (approximately 1.2 inches) to account for the nosing, which is the slightly projecting edge of the new winder step. The front portion of the landing area will be covered by the winder step itself, while any remaining deeper sections behind it will require winder step extensions. For instance, in the video, a 600mm (approx. 23.6 inches) winder step and two winder step extensions are used for the staircase shown.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11307-2</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure, Cut, and Test-fit — Winder Step Measurement</video:title>
      <video:description>With the skirting boards removed, carefully measure the exact dimensions required for your winder step and winder step extensions. Place the winder step and extension pieces onto the landing area and mark any areas that need to be cut to achieve a precise fit, especially around corners or existing newel posts. The video shows using a measuring tape to determine the length needed and marking the pieces with a pencil. Make sure to test-fit each piece multiple times, adjusting cuts as needed, to ensure a snug and accurate placement around any obstacles, such as the newel post or wall edges, before proceeding to permanent installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11307-3</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — Winder Step Measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11308-1</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HEeE2yFkMeY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Walkline Tread Depth Requirements — Winder Step Measurement</video:title>
      <video:description>Following the minimum narrow-point requirement, the video discusses the second critical code: a minimum tread depth of 10 inches at the walkline. The walkline for winder steps is typically located 12 inches from the smallest side of the stairway. The narrator uses examples to show how a winder step&apos;s depth, even if meeting the 6-inch minimum at the narrowest point, must also satisfy the 10-inch minimum along the walkline. Diagrams illustrate how certain designs might fail this walkline requirement if not adequately planned, emphasizing that the tread depth at the walkline can be longer but not shorter than 10 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HEeE2yFkMeY</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11308-2</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/HEeE2yFkMeY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Understanding Winder Tread Minimums — Winder Step Measurement</video:title>
      <video:description>The video begins by introducing the importance of updated stair building codes, specifically referencing the 2024 International Residential Code for winder steps. It highlights the primary requirement: a minimum of 6 inches for the tread depth at any point within the clear width of the stair, usually at the narrowest point of the winder. Several diagrammatic examples of winder steps are shown, illustrating both compliant and non-compliant designs based on this 6-inch minimum. The narrator points out that a simple square-cut winder may not meet this requirement if the narrowest point falls below 6 inches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/HEeE2yFkMeY</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11308-3</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gnQtWlRdZWk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Verify Riser Height and Tread Depth — Winder Step Measurement</video:title>
      <video:description>This step covers the code requirements for individual riser height and tread depth. For individual risers, the vertical rise cannot exceed 7.75 inches. This ensures a comfortable and safe ascent/descent. For tread depth, the minimum requirement is 10 inches. The video highlights that older codes had different specifications (e.g., 9-inch treads and 8-inch risers), underscoring the importance of referencing current building codes, such as the 2021 International Residential Code, as local regulations may vary. A graphic illustrates how a small object can pass through an open riser if it exceeds the maximum opening size allowed by code.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gnQtWlRdZWk</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11306-1</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Order Winder Steps and Extensions — Winder Step Measurement</video:title>
      <video:description>Begin by determining the necessary number of winder steps and winder step extensions for your landing area. To do this, measure the depth of your landing area from the back wall to the front edge. To this measurement, add 30 millimeters (approximately 1.2 inches) to account for the nosing, which is the slightly projecting edge of the new winder step. The front portion of the landing area will be covered by the winder step itself, while any remaining deeper sections behind it will require winder step extensions. For instance, in the video, a 600mm (approx. 23.6 inches) winder step and two winder step extensions are used for the staircase shown.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11306-2</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure, Cut, and Test-fit — Winder Step Measurement</video:title>
      <video:description>With the skirting boards removed, carefully measure the exact dimensions required for your winder step and winder step extensions. Place the winder step and extension pieces onto the landing area and mark any areas that need to be cut to achieve a precise fit, especially around corners or existing newel posts. The video shows using a measuring tape to determine the length needed and marking the pieces with a pencil. Make sure to test-fit each piece multiple times, adjusting cuts as needed, to ensure a snug and accurate placement around any obstacles, such as the newel post or wall edges, before proceeding to permanent installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11306-3</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mark and Cut Your Treads — Winder Step Measurement</video:title>
      <video:description>With the nosing removed, prepare the replacement treads for installation. Begin by measuring each tread individually using a tape measure, as stairway widths can vary from one step to the next. Mark the length that needs to be cut off using a sharpie or pencil. If the tread is a double return tread, you will not need to make any further cuts as it has been manufactured to your provided dimensions. As a pro tip, use a piece of scrap wood to push the tread out at the return area. This allows you to properly scribe the skirt before cutting, which will help give you an exact fit and cut for your tread. Use a miter saw to make the necessary cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11305-1</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9Jd0pJ8zZvQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread Width — Winder Step Measurement</video:title>
      <video:description>Start by measuring the entire width of your stair tread. This measurement typically goes from a spindle to the wall, or simply wall-to-wall if there are no spindles. For example, if the full width is 43 inches. Next, decide how much exposed wood you want to see on either side of the carpet stair tread. The recommendation is 2 to 4 inches per side. If you choose 4 inches per side, that&apos;s a total of 8 inches (4 inches + 4 inches). Subtract this total from the full stair width (e.g., 43 - 8 = 35 inches). This final number is the ideal width for your carpet stair tread.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9Jd0pJ8zZvQ</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11305-2</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure, Cut, and Test-fit — Winder Step Measurement</video:title>
      <video:description>With the skirting boards removed, carefully measure the exact dimensions required for your winder step and winder step extensions. Place the winder step and extension pieces onto the landing area and mark any areas that need to be cut to achieve a precise fit, especially around corners or existing newel posts. The video shows using a measuring tape to determine the length needed and marking the pieces with a pencil. Make sure to test-fit each piece multiple times, adjusting cuts as needed, to ensure a snug and accurate placement around any obstacles, such as the newel post or wall edges, before proceeding to permanent installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11305-3</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Order Winder Steps and Extensions — Winder Step Measurement</video:title>
      <video:description>Begin by determining the necessary number of winder steps and winder step extensions for your landing area. To do this, measure the depth of your landing area from the back wall to the front edge. To this measurement, add 30 millimeters (approximately 1.2 inches) to account for the nosing, which is the slightly projecting edge of the new winder step. The front portion of the landing area will be covered by the winder step itself, while any remaining deeper sections behind it will require winder step extensions. For instance, in the video, a 600mm (approx. 23.6 inches) winder step and two winder step extensions are used for the staircase shown.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11304-1</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Order Winder Steps and Extensions — Winder Step Measurement</video:title>
      <video:description>Begin by determining the necessary number of winder steps and winder step extensions for your landing area. To do this, measure the depth of your landing area from the back wall to the front edge. To this measurement, add 30 millimeters (approximately 1.2 inches) to account for the nosing, which is the slightly projecting edge of the new winder step. The front portion of the landing area will be covered by the winder step itself, while any remaining deeper sections behind it will require winder step extensions. For instance, in the video, a 600mm (approx. 23.6 inches) winder step and two winder step extensions are used for the staircase shown.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11304-2</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Gx2iPksm2Qs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure, Cut, and Test-fit — Winder Step Measurement</video:title>
      <video:description>With the skirting boards removed, carefully measure the exact dimensions required for your winder step and winder step extensions. Place the winder step and extension pieces onto the landing area and mark any areas that need to be cut to achieve a precise fit, especially around corners or existing newel posts. The video shows using a measuring tape to determine the length needed and marking the pieces with a pencil. Make sure to test-fit each piece multiple times, adjusting cuts as needed, to ensure a snug and accurate placement around any obstacles, such as the newel post or wall edges, before proceeding to permanent installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Gx2iPksm2Qs</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11304-3</loc>
    <lastmod>2026-10-12T17:50:10.375Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/WDHMS0XrVxo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify Inconsistent Tread Depths in Irregular Winders — Winder Step Measurement</video:title>
      <video:description>This step explores the challenges of irregular winder layouts, such as L-shaped or U-shaped stairs, where treads might not conform to a single concentric circle. It demonstrates how designing these steps by radiating lines from a corner point, without a consistent curved walk line, leads to significantly different tread depths along the 12-inch walk line. These inconsistencies are shown with varying measurements (e.g., 1&apos; 6 1/2&quot;, 11 3/4&quot;, 1&apos; 1 9/16&quot;), indicating non-compliance with codes that require uniform tread depths along the walk line.</video:description>
      <video:player_loc>https://www.youtube.com/embed/WDHMS0XrVxo</video:player_loc>
      <video:duration>104</video:duration>
      <video:publication_date>2026-10-12T17:50:10.375Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11296-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/lLqEJyZFv_A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Optimal Garden Site for Sun — Flower Planting</video:title>
      <video:description>Begin by selecting the most suitable location for your raised garden beds, as sun exposure is the single most critical factor for successful vegetable cultivation. Most vegetables require &apos;full sun,&apos; meaning at least 6-8 hours of direct sunlight per day. Avoid areas with deep or even moderate shade, as this will significantly hinder plant growth and reduce yields. To accurately assess the amount of sunlight a potential site receives, utilize a dedicated sun calculator tool, such as the &apos;Suncalc&apos; meter by Rapidtest. Place this device in the ground and leave it for a full sunny day (avoiding cloudy days for accurate readings). After 24 hours, the meter will indicate the sun exposure level (full sun, partial sun, partial shade, or full shade). This information will help you align the site&apos;s light conditions with the specific sun requirements of your chosen vegetables, typically listed on seed packets or plant labels.</video:description>
      <video:player_loc>https://www.youtube.com/embed/lLqEJyZFv_A</video:player_loc>
      <video:duration>136</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11296-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bZt1LiXJLm0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Planting Location — Flower Planting</video:title>
      <video:description>The presenter advises on selecting a planting location, stressing the importance of full sun exposure for sunflowers to thrive. He also suggests considering the orientation of the plants so that the mature sunflower heads, which typically face east, can be enjoyed from the preferred viewing angle. He notes that sunflowers are fast-growing, so planting can occur even late in the season, provided there are 7-9 weeks before the first frost.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bZt1LiXJLm0</video:player_loc>
      <video:duration>132</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11296-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QPfjvVC-PiE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose the Site — Flower Planting</video:title>
      <video:description>Begin by selecting the ideal location for your wildflowers. For the best results and 90% success, choose a spot that receives full sun, meaning at least six hours of direct sunlight per day. These are typically open and sunny areas. If a full sun spot is not available, you can consider a partial shade mixture, which requires a minimum of three hours of sun. Such locations might be along a wood line or near a building that provides shade for part of the day. Prioritizing full sun will yield the most vibrant and abundant blooms.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QPfjvVC-PiE</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11297-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-k6j8lqQgTk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Soil — Flower Planting</video:title>
      <video:description>Begin by digging a square hole, approximately 45 centimeters (18 inches) by 45 centimeters (18 inches), and about the depth of your spade. After removing the initial soil, use a spade to break up the soil at the bottom of the hole for a bit more depth, without actually removing it. Then, switch to a garden fork to thoroughly mix and aerate the loosened soil, which helps roots grow more easily. Add a generous amount of compost, roughly a third of a wheelbarrow or half a dozen shovelfuls, to the loosened soil, mixing it well. The compost can be normal garden compost, well-rotted manure, or a bagged product from a garden center, as long as it&apos;s organic. It keeps the soil open and airy. Finally, sprinkle mycorrhizal fungi (such as Rootgrow) into the hole and mix it with the soil. This fungi greatly enhances the root system&apos;s ability to absorb nutrients from the soil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-k6j8lqQgTk</video:player_loc>
      <video:duration>109</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11297-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/grVQARsNRdE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Garden Bed Soil Structure — Flower Planting</video:title>
      <video:description>Flowers require good soil to bloom vigorously. To prepare the garden bed, first, ensure the existing soil is well-worked. This usually involves digging and breaking up compacted soil. Next, incorporate soil amendments to improve both drainage and the richness of the soil. Good drainage is essential to prevent waterlogging, while rich soil provides the necessary nutrients for plant growth. Additionally, make sure the soil is adequately moist before planting; dry soil can shock new plants, leading to poor establishment.</video:description>
      <video:player_loc>https://www.youtube.com/embed/grVQARsNRdE</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11297-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LvlwfYa9WlQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Planting Site — Flower Planting</video:title>
      <video:description>Before planting, prepare the chosen area by clearing it of all existing weeds, grass, and debris. Use a garden fork or shovel to loosen the soil to a depth of 6-8 inches. If your soil is heavy clay, incorporate organic matter like compost or grit to improve drainage, as Sedum thrives in well-draining conditions. Level the area with a rake.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LvlwfYa9WlQ</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11298-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BCYBzmO5xxw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Choose Plants for Your Region, Climate, and Growing Conditions — Flower Planting</video:title>
      <video:description>After determining location, shape, and color, this step focuses on selecting the actual plants. The primary consideration is to choose plants with similar basic needs for sunlight, water, and soil (e.g., drought-tolerant sun lovers for a Mediterranean-inspired garden). Additionally, incorporating plants native to your area is highly beneficial, as they are easier to care for and attract pollinators and other beneficial insects.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BCYBzmO5xxw</video:player_loc>
      <video:duration>36</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11298-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YwGrNJkfkS8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Select Plants by Conditions &amp; Color Theme — Flower Planting</video:title>
      <video:description>The presenter advises selecting plants based on fundamental criteria to ensure their success and align with the garden&apos;s overall aesthetic. Key considerations include the amount of sunlight an area receives (sunny or shady spots), desired thematic elements such as fragrance, and specific color palettes (e.g., a monochromatic garden featuring all white or all yellow flowers). Other potential themes mentioned include focusing on ornamental grasses, exotic flowers, or creating a rock garden, which all contribute to the overall perennial bed layout using specific color theory applications (like monochromatic schemes).</video:description>
      <video:player_loc>https://www.youtube.com/embed/YwGrNJkfkS8</video:player_loc>
      <video:duration>21</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11298-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/0Jf_yvf3kk0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan Plant Beds and Selection — Flower Planting</video:title>
      <video:description>Now, focus on the plant beds. Decide on the shape of your beds: straight lines offer defined points of interest, while curves tend to create a more natural look. When selecting plants, aim for a cohesive look by picking a few colors that work well together and avoiding too much variation in small areas. Layer plants by height, placing taller ones in the back of the bed and shorter ones in the front. Ensure chosen plants complement any existing landscaping. Remember that plants will grow, so allow enough space for them to reach their full maturity. Consider using perennials, which return every season, for long-term structure, and annuals for seasonal bursts of color.</video:description>
      <video:player_loc>https://www.youtube.com/embed/0Jf_yvf3kk0</video:player_loc>
      <video:duration>46</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11299-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YOfsUwzgv_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Layout Plants for Design and Spacing — Flower Planting</video:title>
      <video:description>Prior to planting, lay out all your plants on the prepared soil in their pots or trays. This allows you to visualize the arrangement and make adjustments. It&apos;s important to consider how large each plant will grow in future years and ensure they have ample space to expand without overcrowding. To create a more natural and fuller appearance, position plants in groups of three of the same kind. If you have many of one variety, repeating these groups can add a sense of balance and symmetry to your border design, making it more visually appealing than haphazard placement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YOfsUwzgv_g</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11299-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hHX2-qBmCCo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Lay Out Plants — Flower Planting</video:title>
      <video:description>The gardeners begin by arranging all the potted plants onto the garden bed. This crucial step allows them to visualize the final layout, ensuring proper spacing and aesthetic balance before any digging begins. They adjust the positions of the white petunias, yellow Gaillardia, lavender, clematis, boxwood, goldmound spirea, and white yarrow until a pleasing arrangement is achieved along the curved bed and near the picket fence.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hHX2-qBmCCo</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11299-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hbov3lC2Tsc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Arrange Plants and Flowers — Flower Planting</video:title>
      <video:description>Now for the most creative part: arranging your plants and flowers. Carefully remove each plant from its nursery pot, gently teasing apart any tightly bound roots at the bottom to encourage outward growth. Position the plants in the potting mix according to your desired aesthetic, considering factors such as plant height, texture, color, and light requirements. Place taller plants in the center or back, mounding plants as &apos;fillers&apos;, and trailing plants as &apos;spillers&apos; over the edges. Fill any gaps with additional potting mix and gently pat around the base of each plant to secure it.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hbov3lC2Tsc</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11300-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hHX2-qBmCCo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plant Annuals and Perennials — Flower Planting</video:title>
      <video:description>Carefully remove each plant from its nursery pot. If the roots are circling tightly, gently loosen them with your fingers to encourage outward growth. Place the plant into the prepared hole, ensuring the top of the root ball is level with the surrounding soil. Backfill the hole with soil, gently firming it around the plant to remove air pockets. Repeat this process for all plants.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hHX2-qBmCCo</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11300-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VYD_nd9IEgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plant New Plants — Flower Planting</video:title>
      <video:description>Once the plant arrangement is finalized, begin planting. Dig holes for each plant, ensuring they are wide and deep enough to accommodate the root ball. Carefully remove each plant from its nursery pot, loosen any circling roots, and place the plant in the hole so that the top of the root ball is level with the surrounding soil. Backfill the hole with soil, gently firming it around the base of the plant. Consider adding soil amendments like compost or fertilizer if needed to enrich the soil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VYD_nd9IEgQ</video:player_loc>
      <video:duration>17</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11300-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ndPHL9A0--c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plant New Flowers — Flower Planting</video:title>
      <video:description>Carefully remove each flower from its nursery pot and place it into a prepared hole. Ensure the top of the root ball is level with the surrounding soil. Gently backfill the hole with soil, pressing firmly around the base of the plant to remove air pockets. The creator plants red begonias in the front row, yellow coleus in the second row, and white begonias in the corner, with hostas and liriope interspersed.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ndPHL9A0--c</video:player_loc>
      <video:duration>23</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11301-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/SCdWi8eAR5U/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water the Plants — Flower Planting</video:title>
      <video:description>After all the flowers have been planted and the mulch is in place, it is essential to give the entire flower bed a thorough watering. This initial watering serves several critical purposes: it helps settle the soil around the newly planted roots, eliminates any air pockets that could dry out the roots, and provides much-needed moisture to help the plants establish themselves in their new environment. Use a gentle stream of water to avoid displacing soil or damaging delicate young plants.</video:description>
      <video:player_loc>https://www.youtube.com/embed/SCdWi8eAR5U</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11301-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hHX2-qBmCCo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water Newly Planted Bed — Flower Planting</video:title>
      <video:description>After all plants are in the ground, thoroughly water the entire garden bed. This helps settle the soil around the roots and provides essential moisture for the plants to establish themselves in their new environment. A garden hose with a gentle shower setting is ideal for this task.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hHX2-qBmCCo</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11301-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YOfsUwzgv_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water and Establish Plants — Flower Planting</video:title>
      <video:description>Immediately after planting all the perennials, water them in thoroughly using a watering can. This helps settle the soil around the roots and provides initial hydration. You will need to continue watering them regularly until their roots have fully established themselves in the garden bed and are capable of finding their own water. With proper care and establishment, these hardy herbaceous perennials will mature and fill your border with beautiful summer color year after year, providing great value for money as they grow bigger and better with each passing season.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YOfsUwzgv_g</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11302-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/VYD_nd9IEgQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Mulch — Flower Planting</video:title>
      <video:description>Once all the plants are in the ground, spread a layer of mulch over the entire garden bed. Mulch helps retain soil moisture, suppress weeds, and regulate soil temperature. Spread an even layer, ensuring it doesn&apos;t pile up against the plant stems, which can lead to rot.</video:description>
      <video:player_loc>https://www.youtube.com/embed/VYD_nd9IEgQ</video:player_loc>
      <video:duration>77</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11302-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nVW2EB-UlMk/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Mulch and Water — Flower Planting</video:title>
      <video:description>After planting, create a small, circular well around the base of the plant using soil to help retain water. Then, give the newly planted specimen a thorough initial watering. Once the water has soaked in, apply a layer of mulch, typically 3 to 4 inches thick for the first application. Distribute the mulch evenly over the bed, ensuring it does not touch the plant&apos;s stem, which can lead to rot. Finally, water the mulched area again. Mulch is highly beneficial for weed prevention and water retention, helping to keep the soil cool and reducing evaporation, which is especially important for new plants establishing their root systems.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nVW2EB-UlMk</video:player_loc>
      <video:duration>71</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11302-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Tim4LEo6l10/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Mulch — Flower Planting</video:title>
      <video:description>Once the plant is backfilled, add a layer of natural mulch around its base. The video suggests using &apos;ground pine bark mulch&apos; and applying a 1- to 2-inch layer. Extend the mulch out to the plant&apos;s dripline or even beyond for optimal coverage. A crucial detail is to keep the mulch away from the base of the plant by about 1-2 inches. This small gap prevents direct contact between the mulch and the plant&apos;s stem or trunk, which can create a pathway for pests or diseases to potentially infect the plant.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Tim4LEo6l10</video:player_loc>
      <video:duration>63</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11303-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/zPnhP1o0GD0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Post-Planting Watering and Ongoing Maintenance — Flower Planting</video:title>
      <video:description>After planting, the new native garden requires consistent care to ensure plant establishment. During the rainy season, hand-water frequently as needed. For the first summer, water every 6 to 8 weeks, adjusting based on plant needs and local climate. The goal is to establish the plants so they become self-sufficient and require minimal watering later. This ongoing care ensures the garden thrives and evolves over time, creating a beautiful and sustainable ecosystem.</video:description>
      <video:player_loc>https://www.youtube.com/embed/zPnhP1o0GD0</video:player_loc>
      <video:duration>94</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11303-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YOfsUwzgv_g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water and Establish Plants — Flower Planting</video:title>
      <video:description>Immediately after planting all the perennials, water them in thoroughly using a watering can. This helps settle the soil around the roots and provides initial hydration. You will need to continue watering them regularly until their roots have fully established themselves in the garden bed and are capable of finding their own water. With proper care and establishment, these hardy herbaceous perennials will mature and fill your border with beautiful summer color year after year, providing great value for money as they grow bigger and better with each passing season.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YOfsUwzgv_g</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11303-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/-_lhvN_wN8s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Water and Ongoing Care — Flower Planting</video:title>
      <video:description>After planting and setting up the protective covers, water the plants thoroughly. Consistent watering is crucial, especially in windy conditions, as wind can quickly dry out the soil. Regular monitoring of soil moisture is recommended. The protective hoops with fabric will also help retain heat, promoting faster growth. The speaker emphasizes the low maintenance of ranunculus and anemones, noting that minimal fertilization beyond the initial soil amendment is often sufficient.</video:description>
      <video:player_loc>https://www.youtube.com/embed/-_lhvN_wN8s</video:player_loc>
      <video:duration>14</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11294-1</loc>
    <lastmod>2026-10-12T13:22:20.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Us8Ga7_MYUI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Treads and Mark Laminate — curved-stair-measurement</video:title>
      <video:description>Using your measuring tape, accurately measure the width and depth of each individual stair tread. The depth measurement is taken from the very edge of the bullnose (the rounded, protruding part of the stair tread) to the face of the existing riser (the vertical board at the back of the step). It is crucial to measure each tread separately, as stairs are rarely identical in size or perfectly square. Once measurements are taken, record them on a notepad. Then, transfer these precise measurements onto the Cap-A-Tread laminate material, marking the cut lines clearly with a pencil.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Us8Ga7_MYUI</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-12T13:22:20.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11294-2</loc>
    <lastmod>2026-10-12T13:22:20.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/81IEkg7WWGQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Mark Treads — curved-stair-measurement</video:title>
      <video:description>Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/81IEkg7WWGQ</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-10-12T13:22:20.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11294-3</loc>
    <lastmod>2026-10-12T13:22:20.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/9It2NMPjH6c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Treads — curved-stair-measurement</video:title>
      <video:description>Begin by using a stair jig, also known as scribe tools, to accurately measure the dimensions of each stair tread. Place the stair jig firmly against the side and back of the tread, adjusting its arms to match the exact angles and lengths. Lock the jig&apos;s position to capture the precise measurements.</video:description>
      <video:player_loc>https://www.youtube.com/embed/9It2NMPjH6c</video:player_loc>
      <video:duration>18</video:duration>
      <video:publication_date>2026-10-12T13:22:20.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11295-1</loc>
    <lastmod>2026-10-12T13:22:20.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for First Winder Step — curved-stair-measurement</video:title>
      <video:description>Begin by taking a roll of kraft paper and unrolling it onto the second winder step (the first winder step to be templated). Line up one straight edge of the paper along the back edge of the tread, against the riser of the next step. Use an electric stapler to secure the paper in the middle of the riser, making sure the paper is flat and conforms to the step&apos;s shape. Fold the paper neatly around the nosing (the front edge of the step) and along the side edge of the winder. Secure it again with staples in the middle, ensuring staples are placed where they will be covered by the finished carpet runner and do not damage the visible part of the stairs if they were real finished stairs. Use a utility knife to carefully cut along the edges of the step, forming the exact shape of the winder tread and riser. This creates the first paper template. The presenter mentions that on actual stairs, the nosing would be thicker than the demo stairs, and emphasizes care when using the knife to avoid damaging the stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>108</video:duration>
      <video:publication_date>2026-10-12T13:22:20.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11295-2</loc>
    <lastmod>2026-10-12T13:22:20.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/cO_ZnMP1kIM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Create Template for Second Winder Step — curved-stair-measurement</video:title>
      <video:description>Repeat the templating process for the next winder step using a fresh piece of kraft paper. This involves aligning the paper, securing it with staples, folding it around the nosing and side edges, and cutting it to the exact shape of the step. As with the previous template, mark the runner&apos;s width, center line, and straight edges. Crucially, ensure that the measurements (e.g., 28 inches wide) for the runner remain consistent across all winder steps to maintain a uniform appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/cO_ZnMP1kIM</video:player_loc>
      <video:duration>64</video:duration>
      <video:publication_date>2026-10-12T13:22:20.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11295-3</loc>
    <lastmod>2026-10-12T13:22:20.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m0TM4PCC8Tw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Creating Custom Templates for Each Step — curved-stair-measurement</video:title>
      <video:description>First, use painter&apos;s tape to mark the desired outline of the carpet runner on the stair treads, particularly around the quarter round and edges. Then, unroll the brown paper over the first tread and secure it temporarily with painter&apos;s tape. Use a pencil or marker to meticulously trace the exact shape of the stair tread onto the paper. Once traced, cut out the paper template with scissors or a utility knife. Repeat this process for all six pie-shaped steps, carefully numbering each template to maintain order. Secure the templates in place with a hammer stapler to prevent movement while tracing and cutting. Remember to account for the orientation of each step when numbering and preparing the templates, as they will be flipped for cutting the carpet.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m0TM4PCC8Tw</video:player_loc>
      <video:duration>37</video:duration>
      <video:publication_date>2026-10-12T13:22:20.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11293-1</loc>
    <lastmod>2026-10-12T13:22:20.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Gather Tools and Materials — curved-stair-measurement</video:title>
      <video:description>Begin by gathering all the necessary tools and materials required for the stair tread installation. This includes various cutting saws (circular, table, or miter saw with a fine-tooth blade), a rubber mallet, a hammer, a caulking gun, a finish nailer, polyurethane construction adhesive (do NOT use water-based adhesives), an angle gauge, a tape measure, wood putty, caulk, and/or clear silicone. Having everything readily available will streamline the installation process.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>25</video:duration>
      <video:publication_date>2026-10-12T13:22:20.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11293-2</loc>
    <lastmod>2026-10-12T13:22:20.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hz7gIkkZWfI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure Stair Tread and Riser — curved-stair-measurement</video:title>
      <video:description>Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hz7gIkkZWfI</video:player_loc>
      <video:duration>30</video:duration>
      <video:publication_date>2026-10-12T13:22:20.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11293-3</loc>
    <lastmod>2026-10-12T13:22:20.639Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4fML3-Qwo_c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Hardwood Pieces — curved-stair-measurement</video:title>
      <video:description>Accurate measurement is critical for a professional finish. Use a stair tread template tool to precisely measure the length and angle of each stair tread and riser. This tool allows you to transfer the exact dimensions and angles to your hardwood flooring material. Mark the cut lines onto the hardwood pieces using a pencil. Use a miter saw for cross-cutting the wood to the determined lengths and angles. For ripping cuts, such as adjusting the width of a tread or riser, utilize a table saw. Ensure all cuts are clean and precise to minimize gaps during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4fML3-Qwo_c</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-10-12T13:22:20.639Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11282-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nTjC3oWsXz4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Repair Deck Structure — Deck Staining</video:title>
      <video:description>Inspect the entire deck, including the railing, for any signs of rot, splinters, or raised fasteners (nails or screws). For any raised nails, use a hammer and a nail set to sink them below the surface of the board. Drive in any protruding screws to ensure a flush surface. Use a putty knife to carefully remove any splinters to prevent injury and create a smooth finish. Replace any rotten sections of wood and, if necessary, warped balusters to maintain structural integrity and appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nTjC3oWsXz4</video:player_loc>
      <video:duration>22</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11282-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/On6WF-_OjHI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Inspect and Repair Damaged Boards — Deck Staining</video:title>
      <video:description>Thoroughly inspect the entire deck for any signs of damage such as loose, cracked, or rotting boards. Use a screwdriver to check for loose screws and a drill to tighten or replace them. If boards are significantly damaged, replace them with new timber of the same type to maintain consistency and structural integrity.</video:description>
      <video:player_loc>https://www.youtube.com/embed/On6WF-_OjHI</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11282-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QmS9UydYrok/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify and Address Deck Problems — Deck Staining</video:title>
      <video:description>Before cleaning or sealing, inspect the deck for structural issues or damage. Check the railing posts to ensure they are securely lag-bolted to the deck structure; nails alone are insufficient and can lead to very loose railings. Examine the top railing for sloppy craftsmanship like gaps filled with caulk or glue, as these allow water intrusion, causing wood rot and splitting. Look for cupped deck boards, which can create trip hazards. Boards with the &apos;cup&apos; installed upwards will warp upwards, increasing the hazard. Ideally, boards should be installed with the &apos;cup&apos; facing down to mitigate cracking and reduce tripping risks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QmS9UydYrok</video:player_loc>
      <video:duration>145</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11283-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Endync6z3XM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean the Deck — Deck Staining</video:title>
      <video:description>Begin by assessing the deck&apos;s condition. The video demonstrates using a pump sprayer, which is preferred over a power washer to avoid damaging wood fibers. Pour a biodegradable wood cleaner into the pump sprayer, mixing it with water in a one-to-one (1:1) ratio. Before applying the cleaner, thoroughly spray the entire deck with cool, clear water using a garden hose. Then, apply the mixed cleaner evenly across the wet deck using the pump sprayer. Allow the cleaner to sit for about 10 minutes to penetrate the dirt and grime. After letting it sit, use a stiff bristle brush to scrub the deck, working the cleaner into the wood and dislodging any remaining dirt or algae. Finally, rinse the deck thoroughly with the garden hose to remove all cleaner and loosened debris.</video:description>
      <video:player_loc>https://www.youtube.com/embed/Endync6z3XM</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11283-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rnepW1qumvg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Clean Your Deck Thoroughly — Deck Staining</video:title>
      <video:description>Thoroughly clean the deck using a deck cleaner. First, wet the deck surface with a hose. Then, apply the deck cleaner according to the product instructions. Use a stiff-bristled scrub brush to scrub the entire deck, paying attention to areas with grime, mildew, or old stain residue. Finally, rinse the deck thoroughly with water, making sure to remove all cleaner residue.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rnepW1qumvg</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11283-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JUqgr7AIcFU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Deck Cleaner — Deck Staining</video:title>
      <video:description>Begin by applying a specialized deck cleaning solution to the entire surface of the deck. The video shows a person using a garden hose attachment bottle to spray the cleaner evenly over the wooden planks. This step is crucial for loosening dirt, grime, mildew, and old stain, preparing the deck for a deeper clean.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JUqgr7AIcFU</video:player_loc>
      <video:duration>1</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11284-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/KPq_DYxodQs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sanding the Deck Surface — Deck Staining</video:title>
      <video:description>Using an orbital sander, equipped with appropriate grit sandpaper (e.g., starting with 60-80 grit for removal and finishing with 100-120 grit for smoothness), carefully sand the entire wooden deck surface. This process is crucial for removing any remaining old, peeling stain or paint, smoothing out rough areas, and opening the wood grain to ensure optimal adhesion for the new stain. Pay close attention to areas with significant wear or discoloration. After sanding, use a leaf blower again to remove all sanding dust from the deck.</video:description>
      <video:player_loc>https://www.youtube.com/embed/KPq_DYxodQs</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11284-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/JUqgr7AIcFU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Light Sand Deck — Deck Staining</video:title>
      <video:description>Once the deck is completely dry, perform a light sanding of the entire surface. The video demonstrates using a long-handled random orbital sander, which helps achieve a smooth finish and prepares the wood for staining. This step removes any remaining loose fibers, splintered wood, or minor imperfections from the cleaning process, ensuring better stain adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/JUqgr7AIcFU</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11284-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/nTjC3oWsXz4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand All Deck Surfaces — Deck Staining</video:title>
      <video:description>Once the deck has dried, use a pole sander with 50-grit sandpaper to sand the deck boards. Always sand in the direction of the wood grain to avoid cross-grain scratches. Make sure to also sand the railings and balusters to create a smooth, consistent surface for the new coating.</video:description>
      <video:player_loc>https://www.youtube.com/embed/nTjC3oWsXz4</video:player_loc>
      <video:duration>7</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11285-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QmS9UydYrok/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Deck Stain — Deck Staining</video:title>
      <video:description>Dip the brush into the deck stain and apply it to the deck surface, focusing on even coverage. For larger, flat areas, use the roller with an extension pole to spread the stain. For spindles, railings, and other intricate parts, use the disposable brush to carefully apply the stain. Work in sections, ensuring the stain is absorbed evenly into the wood. The goal is to apply a consistent, protective layer that brings out the natural beauty of the wood, making the deck look as good as new.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QmS9UydYrok</video:player_loc>
      <video:duration>24</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11285-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/7w8O-GPx2a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stain to Deck Walking Surface — Deck Staining</video:title>
      <video:description>Using a flat pad applicator attached to an extension pole, begin applying the mixed stain to the main walking surface of the deck. Work in small, manageable sections, covering two to three boards at a time. This technique helps maintain a &apos;wet edge,&apos; meaning you are always blending fresh stain into stain that is still wet, preventing visible lap marks. Immediately after applying with the pad, use a 2-inch natural bristle brush to work the stain into the gaps and spaces between the deck boards. This ensures thorough coverage and prevents pooling in the crevices. Remember, this specific stain is designed as a one-coat application, and applying a second coat is not recommended.</video:description>
      <video:player_loc>https://www.youtube.com/embed/7w8O-GPx2a8</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11285-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rnepW1qumvg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Stain Into Your Deck — Deck Staining</video:title>
      <video:description>Begin applying the deck stain. It&apos;s crucial to stir the stain often during use to ensure the pigments and solids remain evenly distributed. Apply the stain along the full length of one board before moving to the next. This technique prevents lap marks. When staining the main deck surface, work towards your exit point to avoid painting yourself into a corner.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rnepW1qumvg</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11286-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/F9abqSCsXmE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Allow Adequate Drying Time — Deck Staining</video:title>
      <video:description>After applying the stain, allow the deck to dry overnight before walking on it to prevent smudges and ensure the stain sets properly. For full curing and maximum durability, wait at least three days before placing any furniture, planters, or other items back on the deck. This extended drying time ensures the stain has fully hardened and will withstand regular use.</video:description>
      <video:player_loc>https://www.youtube.com/embed/F9abqSCsXmE</video:player_loc>
      <video:duration>9</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11286-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/rnepW1qumvg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Let It Dry for 24 - 48 Hours — Deck Staining</video:title>
      <video:description>Once the staining is complete, allow the deck to dry for 24 to 48 hours before placing any furniture back or walking on it. The exact drying time will vary based on the specific stain product used, humidity, and temperature, so always consult the manufacturer&apos;s instructions on the can.</video:description>
      <video:player_loc>https://www.youtube.com/embed/rnepW1qumvg</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11286-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/jBXnfLe3lzs/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Final Dry and Cure — Deck Staining</video:title>
      <video:description>After applying the second coat, allow the deck to dry for several hours until it is completely tack-free. For optimal durability and longevity, let the stain cure for a few days before returning furniture to the deck or subjecting it to heavy foot traffic. Once cured, your deck will be ready to enjoy.</video:description>
      <video:player_loc>https://www.youtube.com/embed/jBXnfLe3lzs</video:player_loc>
      <video:duration>15</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11276-1</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — stair tread installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11276-2</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4fML3-Qwo_c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Demolition and Subfloor Preparation — stair tread installation</video:title>
      <video:description>Begin by removing the existing stair components. Use a circular saw to make relief cuts on the old treads and risers. Follow up with an oscillating multi-tool to cut into tighter corners and edges where the circular saw cannot reach. Then, use a prying tool, such as a pry bar, to carefully loosen and remove the old wood pieces from the stair frame. Once the bulk of the material is removed, use an angle grinder fitted with a sanding disc to clean up any remaining adhesive, paint, or uneven spots on the stair subfloor. Finish by thoroughly vacuuming the area with a shop vacuum to remove all dust and debris, creating a clean surface for the new installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4fML3-Qwo_c</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11276-3</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — stair tread installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11279-1</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/tep_pcQF4RE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Risers (Counter Stairs) — stair tread installation</video:title>
      <video:description>After installing all the treads, proceed to measure, cut, and glue each counter stair (riser). Measure the height and width of the space between each newly installed tread. Cut the new wooden risers to fit these dimensions precisely. Apply construction wood adhesive to the back of each riser and firmly press it into place, ensuring a tight fit between the treads.</video:description>
      <video:player_loc>https://www.youtube.com/embed/tep_pcQF4RE</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11279-2</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/YAi3vAulu7A/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Riser Boards and Tack in Place — stair tread installation</video:title>
      <video:description>Cut the primed pine riser boards to the appropriate length for each stair. A small notch may be required in the riser board to accommodate existing trim that hangs over the edge; this will later be concealed with caulk and putty. Once cut, position the riser boards with the support blocks behind them to ensure they are tight and flush against the back of the tread. Secure them in place, typically with a brad nailer.</video:description>
      <video:player_loc>https://www.youtube.com/embed/YAi3vAulu7A</video:player_loc>
      <video:duration>34</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11279-3</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/J4Pg0uZ_9Jw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Treads and Risers — stair tread installation</video:title>
      <video:description>Cut the treads (the horizontal walking surface) and risers (the vertical panels) to the exact dimensions required for each step. Precision is key to a snug fit. Apply construction adhesive, commonly referred to as &apos;glue,&apos; to the top of the stringers and the back of the riser where it meets the stringer. This adhesive helps prevent squeaks and adds significant structural strength. Then, carefully install each riser, followed by its corresponding tread. Secure both with appropriate fasteners, such as finish nails or screws, ensuring they are flush and level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/J4Pg0uZ_9Jw</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11281-1</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gtB7f883da0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Stain and Clear Coat Stairs — stair tread installation</video:title>
      <video:description>After all hardwood risers and treads are securely installed, the final step is to stain and clear coat them for lasting appeal and protection. Apply your chosen wood stain evenly to all hardwood surfaces using a brush or rag. Work in small sections, wiping off excess stain according to the manufacturer&apos;s instructions. If you have existing hardwood under the carpet that was previously damaged or faded, sand it down thoroughly before applying stain to achieve a uniform finish. Allow the stain to dry completely. Finally, apply multiple coats of a clear coat finish, such as polyurethane, following the product&apos;s guidelines for application and drying time between coats, to protect the wood from wear and tear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gtB7f883da0</video:player_loc>
      <video:duration>16</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11281-2</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/xrqO6WsnouE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal Stained Treads — stair tread installation</video:title>
      <video:description>After the stain has completely dried, apply four coats of a clear sealant, such as Varathane NanoDefence Premium Clear Floor Finish (Satin), to protect the treads. Apply thin, even coats, allowing each coat to dry for the recommended time (2 hours for re-coat) before applying the next. This step will protect the stained wood from wear and tear.</video:description>
      <video:player_loc>https://www.youtube.com/embed/xrqO6WsnouE</video:player_loc>
      <video:duration>19</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11281-3</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/isvMQcjoymE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Seal the Stained Stairs — stair tread installation</video:title>
      <video:description>The final step, as mentioned in the video, is to seal the stained wood. This is particularly important for stairs, which experience heavy foot traffic and require durable protection. Apply a high-quality clear protective finish, such as a polyurethane or a floor-grade wood sealer. Apply multiple thin coats, allowing adequate drying time between each coat as specified by the product manufacturer. For best results and enhanced smoothness, lightly sand the stairs with a very fine-grit sandpaper (e.g., 220-320 grit) between coats, then wipe thoroughly with a tack cloth before applying the next coat. This sealing process protects the stain and the wood from wear, moisture, and scratches.</video:description>
      <video:player_loc>https://www.youtube.com/embed/isvMQcjoymE</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11280-1</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/fTh9RuhZAtY/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill and Sand Wood Surfaces — stair tread installation</video:title>
      <video:description>After all treads and risers are installed, use wood filler to fill in any gaps, nail holes, or imperfections. The video creator used a small metal putty knife for precise application in corners and used her finger for nail holes. Allow the wood filler to dry completely according to manufacturer instructions. Once dry, sand all surfaces of the stair treads smooth. Pay particular attention to the areas with wood filler and any rough edges. The creator used a Ryobi multi-oscillating tool with a sanding attachment for tight corners and a standard sander for the main surfaces.</video:description>
      <video:player_loc>https://www.youtube.com/embed/fTh9RuhZAtY</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11280-2</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/Nd870Y14feg/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Sand Filled and Installed Treads — stair tread installation</video:title>
      <video:description>Before applying any primer or stain, it&apos;s essential to sand all the filled areas smooth. The presenter uses a Ryobi multi-oscillating tool with a sander feature, which is particularly effective for getting into tight corners and along fine edges where the wood filler was applied. After smoothing these detailed areas, she uses a larger, actual sander to do a general pass over all the surfaces of the stairs, ensuring an overall uniform and smooth finish. This prepares the wood perfectly for the next step, which is staining (to be covered in a separate video).</video:description>
      <video:player_loc>https://www.youtube.com/embed/Nd870Y14feg</video:player_loc>
      <video:duration>55</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11280-3</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/bcNiJWXS-nI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Apply Wood Filler and Sand — stair tread installation</video:title>
      <video:description>After structural repairs, wood filler is applied to all holes, cracks, and imperfections on the treads, risers, and railings. A putty knife or similar tool is used to spread the wood filler smoothly and evenly. Once the filler is dry, a sanding block is used for the banisters and risers, and an orbital palm sander is used for the flat stair treads to achieve a smooth finish, removing any excess filler and preparing the wood for painting and staining.</video:description>
      <video:player_loc>https://www.youtube.com/embed/bcNiJWXS-nI</video:player_loc>
      <video:duration>48</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11277-1</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4fML3-Qwo_c/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut New Hardwood Pieces — stair tread installation</video:title>
      <video:description>Accurate measurement is critical for a professional finish. Use a stair tread template tool to precisely measure the length and angle of each stair tread and riser. This tool allows you to transfer the exact dimensions and angles to your hardwood flooring material. Mark the cut lines onto the hardwood pieces using a pencil. Use a miter saw for cross-cutting the wood to the determined lengths and angles. For ripping cuts, such as adjusting the width of a tread or riser, utilize a table saw. Ensure all cuts are clean and precise to minimize gaps during installation.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4fML3-Qwo_c</video:player_loc>
      <video:duration>29</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11277-2</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4Zs64Ev9D0g/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut Treads — stair tread installation</video:title>
      <video:description>After the risers are installed, measure the depth and length of each individual stair tread. According to these measurements, cut your new hardwood treads. It&apos;s crucial to be accurate, as even small errors can lead to visible gaps. You may need to make slight adjustments to ensure a gap-free fit. A track saw, set at a 5-degree angle as demonstrated, can be particularly useful for making precise, straight cuts.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4Zs64Ev9D0g</video:player_loc>
      <video:duration>81</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11277-3</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LLYpECZS7lI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Measure and Cut First Tread — stair tread installation</video:title>
      <video:description>After preparing the riser, move on to the corresponding stair tread. Measure the depth and length of the tread. Similar to the riser, use your cutting saw to cut the tread material 1/8 inch shorter than the measured depth and 1/8 inch shorter than the measured length. These precise, slightly short cuts allow for the necessary expansion gaps and space for caulking.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LLYpECZS7lI</video:player_loc>
      <video:duration>10</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11278-1</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — stair tread installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11278-2</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — stair tread installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11278-3</loc>
    <lastmod>2026-10-25T13:19:13.962Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/gaGNL9MM7a8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Your Treads — stair tread installation</video:title>
      <video:description>In some cases, you may need to install risers before installing your new treads. If this is the case, use construction adhesive and finish nails to secure them. After this, install the treads by applying construction adhesive on the top and front of the nosing of the sub-treads of the stairs. Then, use 1 1/2-inch finish nails with a finish nailer to attach the replacement treads securely. Repeat this step for each of your treads, working your way up the staircase.</video:description>
      <video:player_loc>https://www.youtube.com/embed/gaGNL9MM7a8</video:player_loc>
      <video:duration>26</video:duration>
      <video:publication_date>2026-10-25T13:19:13.962Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11274-1</loc>
    <lastmod>2026-10-10T18:43:40.566Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EXjC9H1O-uA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Prepare the Self-Adhesive Stair Tread — Carpet Stair Tread Installation</video:title>
      <video:description>Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EXjC9H1O-uA</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-10-10T18:43:40.566Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11274-2</loc>
    <lastmod>2026-10-10T18:43:40.566Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-10T18:43:40.566Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11274-3</loc>
    <lastmod>2026-10-10T18:43:40.566Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Subsequent Stair Treads — Carpet Stair Tread Installation</video:title>
      <video:description>Continue the installation process for the remaining stair treads, repeating the steps of peeling the liner, aligning, and firmly pressing each tread onto the subsequent steps. This easy installation method makes the product highly pet-friendly, as dogs and cats can run up and down without slipping, and it also adds a layer of safety for children and the elderly by reducing the risk of slips and falls. The quick delivery for some styles (within a week, at most two) allows for a swift home improvement.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>35</video:duration>
      <video:publication_date>2026-10-10T18:43:40.566Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11275-1</loc>
    <lastmod>2026-10-10T18:43:40.566Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/qszbznpGFS4/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Press Down Firmly — Carpet Stair Tread Installation</video:title>
      <video:description>With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.</video:description>
      <video:player_loc>https://www.youtube.com/embed/qszbznpGFS4</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-10-10T18:43:40.566Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11275-2</loc>
    <lastmod>2026-10-10T18:43:40.566Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install First Stair Tread — Carpet Stair Tread Installation</video:title>
      <video:description>Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn&apos;t perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>67</video:duration>
      <video:publication_date>2026-10-10T18:43:40.566Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11275-3</loc>
    <lastmod>2026-10-10T18:43:40.566Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/FgsoDLpyMl8/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landing Pad — Carpet Stair Tread Installation</video:title>
      <video:description>Select an Oak Valley Designs landing pad that best fits the dimensions of your stair landing. These pads also come with a built-in pad and the same pressure-sensitive adhesive on the back, removing the need for separate padding. Remove the protective backing from the landing pad. Position the pad on the landing area, adjusting as necessary due to the repositionable adhesive. Once satisfied with the placement, press down firmly across the entire surface to smooth it out and ensure good adhesion.</video:description>
      <video:player_loc>https://www.youtube.com/embed/FgsoDLpyMl8</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-10-10T18:43:40.566Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11264-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4O8Tmz_pCYo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Assess and Plan the Drainage System — French Drain Installation</video:title>
      <video:description>Begin by assessing the driveway and surrounding landscape to identify areas where water accumulates or causes erosion. This often occurs where grass or landscaping is higher than the driveway&apos;s edge, trapping water. Plan the route for the open French drain, determining its length and where the collected water will be discharged. Consider the slope and natural contours of the land to ensure effective gravity-fed drainage. Mark the planned trench line using marking paint or stakes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4O8Tmz_pCYo</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11264-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hms1xg291T0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Plan the Location — French Drain Installation</video:title>
      <video:description>Begin by observing your yard to identify areas where excess water pools. Once problem areas are identified, decide on a route for your French drain, aiming to direct the water to an existing drainage system, another body of water, or the road. Before you start, check with local authorities for zoning restrictions and ensure that your water issue isn&apos;t due to pipes that need repair. Using spray paint, stakes, or flags, clearly mark the direction and length of your planned trench. Crucially, ensure the marked trench starts at a higher elevation and slopes down to a lower elevation, directing water away from your home.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hms1xg291T0</video:player_loc>
      <video:duration>40</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11264-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/stdBRIDYmDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dig the Trench with Proper Slope — French Drain Installation</video:title>
      <video:description>Using a sharp digging shovel, begin excavating the trench along the marked path. The trench should be approximately 9 inches wide and 18 to 24 inches deep. As you dig, pay close attention to the slope. For effective drainage, the trench must slope downward 1 inch for every 8 feet of length. Use a measuring tape and a level (or string line with a line level) to continuously check and maintain the correct downward slope, ensuring water will flow away from the problem area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/stdBRIDYmDQ</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11265-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/stdBRIDYmDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dig the Trench with Proper Slope — French Drain Installation</video:title>
      <video:description>Using a sharp digging shovel, begin excavating the trench along the marked path. The trench should be approximately 9 inches wide and 18 to 24 inches deep. As you dig, pay close attention to the slope. For effective drainage, the trench must slope downward 1 inch for every 8 feet of length. Use a measuring tape and a level (or string line with a line level) to continuously check and maintain the correct downward slope, ensuring water will flow away from the problem area.</video:description>
      <video:player_loc>https://www.youtube.com/embed/stdBRIDYmDQ</video:player_loc>
      <video:duration>13</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11265-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4QCyA6bNbSM/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Excavate Drainage Trench — French Drain Installation</video:title>
      <video:description>Excavate the trench using shovels, following the planned route along the driveway and into the grassy area leading to the discharge point. Ensure the trench has a continuous downhill slope for proper water flow. For the long section in the grassy area, a hand shovel is used. Carefully navigate around any tree roots encountered.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4QCyA6bNbSM</video:player_loc>
      <video:duration>60</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11265-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/m4jfMGxoFM0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Dig Trench and Lay Corrugated Pipe — French Drain Installation</video:title>
      <video:description>The video opens with a view of a trench already dug in the ground, revealing a black, corrugated drain pipe laid within it. This initial step involves digging a trench with a consistent slope (typically 1% or 1/8 inch per foot) away from the area to be drained, ensuring the trench is deep and wide enough to accommodate the corrugated pipe and any surrounding gravel. Once the trench is prepared, the perforated corrugated drain pipe is laid in the bottom. This pipe is often wrapped in a filter sock to prevent soil and debris from clogging the perforations.</video:description>
      <video:player_loc>https://www.youtube.com/embed/m4jfMGxoFM0</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11266-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/stdBRIDYmDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Line the Trench with Landscape Fabric — French Drain Installation</video:title>
      <video:description>Line the entire trench, including over the gravel and pipe, with landscape fabric. Overlap the edges of the fabric as you go to ensure full coverage. This fabric acts as a barrier, preventing soil and silt from migrating into the gravel and pipe, which could otherwise lead to clogging and reduce the efficiency of your French drain over time. Make sure there is enough excess fabric on the sides to wrap over the top of the gravel later.</video:description>
      <video:player_loc>https://www.youtube.com/embed/stdBRIDYmDQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11266-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/4O8Tmz_pCYo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Landscape Fabric — French Drain Installation</video:title>
      <video:description>Line the excavated trench with permeable landscape fabric, often referred to as &apos;geotextile fabric&apos;. Ensure the fabric covers the bottom and sides of the trench, with enough overlap at the top to fold over the top layer of stone later. This fabric prevents soil and sediment from mixing with the drainage stone, which would otherwise clog the drain over time and reduce its effectiveness. Secure the fabric temporarily with landscaping pins or rocks.</video:description>
      <video:player_loc>https://www.youtube.com/embed/4O8Tmz_pCYo</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11266-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hms1xg291T0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Line Trench with Landscaping Fabric — French Drain Installation</video:title>
      <video:description>Line the entire trench with landscape fabric. This fabric is crucial for preventing dirt, tree roots, and silt from entering and clogging the drain pipe, ensuring the system&apos;s longevity and effectiveness. When laying the fabric, ensure you leave approximately 10 inches of excess fabric on each side of the trench. This extra material will be used later to wrap around the pipe and gravel, creating a protective barrier.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hms1xg291T0</video:player_loc>
      <video:duration>12</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11267-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/stdBRIDYmDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add a Base Layer of Gravel — French Drain Installation</video:title>
      <video:description>Once the trench is dug to the correct dimensions and slope, add a 3-inch layer of gravel to the bottom. This base layer provides initial drainage and helps to stabilize the perforated pipe that will be laid on top of it. Spread the gravel evenly using a shovel to ensure a consistent depth.</video:description>
      <video:player_loc>https://www.youtube.com/embed/stdBRIDYmDQ</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11267-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PcpFixS88Io/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add Initial Gravel Layer — French Drain Installation</video:title>
      <video:description>Using a shovel, load gravel into a wheelbarrow from your gravel pile. Transport the wheelbarrow to the trench and carefully dump a uniform layer of gravel onto the landscape fabric at the bottom of the trench. This initial layer, often referred to as a &apos;bedding layer&apos;, provides a stable and permeable base for the drainage pipe. Aim for a layer approximately 3-6 inches deep.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PcpFixS88Io</video:player_loc>
      <video:duration>75</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11267-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hms1xg291T0/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Pour Gravel Bedding — French Drain Installation</video:title>
      <video:description>Pour approximately three inches of gravel into the bottom of the trench, directly over the laid landscape fabric. This layer of gravel will serve as a stable bedding for the perforated drain pipes. Ensure the gravel is evenly distributed and compacted to provide a solid foundation for the pipe system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hms1xg291T0</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11268-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/_4LtmDRAT34/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Perforated Drainage Pipes — French Drain Installation</video:title>
      <video:description>Unroll the perforated drainage pipe (4-inch corrugated pipe with sock) and lay it into the fabric-lined trench, connecting it to the T-connector previously installed. Ensure all connections are secure by pushing the new pipe firmly onto the T-connector until it clicks past the internal notches. The video shows using a small amount of electrical tape to temporarily secure the connection points, though the primary stability will come from the backfill materials. Ensure the perforated side of the pipe is facing downwards to effectively collect groundwater.</video:description>
      <video:player_loc>https://www.youtube.com/embed/_4LtmDRAT34</video:player_loc>
      <video:duration>49</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11268-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/stdBRIDYmDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Place the Perforated Pipe — French Drain Installation</video:title>
      <video:description>Carefully place the perforated drainage pipe directly on top of the 3-inch gravel base in the trench. Ensure that the drain holes on the pipe are facing downward. This orientation allows water to seep into the pipe from the bottom and sides, effectively collecting it from the surrounding soil and directing it away. Adjust the pipe as needed to follow the trench&apos;s slope.</video:description>
      <video:player_loc>https://www.youtube.com/embed/stdBRIDYmDQ</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11268-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BzXV68UWkKE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Install Perforated Drain Pipe — French Drain Installation</video:title>
      <video:description>A perforated drain pipe, typically a 4-inch diameter corrugated pipe (a yellow pipe is visible in the video), is carefully positioned on top of the gravel base. The pipe features small perforations (holes) along its length, which allow collected water to enter the pipe. It is crucial to lay the pipe with a continuous, slight slope (e.g., 1/8 to 1/4 inch per foot) towards the designated outlet or discharge point, ensuring gravity efficiently moves the water away from the property.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BzXV68UWkKE</video:player_loc>
      <video:duration>4</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11269-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BzXV68UWkKE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cover Pipe with Gravel — French Drain Installation</video:title>
      <video:description>After the perforated pipe is in place, more clean drainage gravel is added to the trench, completely covering the pipe and filling the trench to an appropriate level. This upper layer of gravel provides additional capacity for water collection and filtration, further protecting the drain pipe from compaction and allowing water to easily reach the perforations. The amount of gravel depends on the trench depth and pipe diameter.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BzXV68UWkKE</video:player_loc>
      <video:duration>8</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11269-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/stdBRIDYmDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Add More Gravel Over the Pipe — French Drain Installation</video:title>
      <video:description>After the perforated pipe is in place, add another 3 to 5 inches of gravel on top of and around the pipe. This layer encases the pipe, providing an excellent filtration medium that allows water to easily reach the pipe while preventing fine soil particles from clogging the drain holes. Evenly distribute the gravel using a shovel.</video:description>
      <video:player_loc>https://www.youtube.com/embed/stdBRIDYmDQ</video:player_loc>
      <video:duration>3</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11269-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hdQmzqKgtEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Fill Trench with Drainage Gravel — French Drain Installation</video:title>
      <video:description>Carefully shovel or, if available, use heavy machinery like a skid steer to dump drainage gravel (e.g., washed stone, clear stone) into the trench. Completely cover the laid drain pipes with the gravel, ensuring the gravel fills the trench up to a few inches below the ground surface. The gravel provides an open void space for water to percolate through and into the perforated pipes.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hdQmzqKgtEc</video:player_loc>
      <video:duration>6</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11270-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/hdQmzqKgtEc/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wrap Fabric and Backfill Trench — French Drain Installation</video:title>
      <video:description>Once the gravel has been placed, carefully fold the excess geotextile fabric from the sides over the top of the gravel, creating a complete wrap around the drainage material. This prevents soil from mixing with the gravel and clogging the system from above. Finally, backfill the remainder of the trench with the excavated soil and replace any removed sod, restoring the landscape to its original appearance.</video:description>
      <video:player_loc>https://www.youtube.com/embed/hdQmzqKgtEc</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11270-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/V17s91XeqvU/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Wrap Gravel with Fabric — French Drain Installation</video:title>
      <video:description>To complete the &apos;gravel burrito&apos;, take one side of the geotextile fabric that is extending up from the trench and pull it tightly over the gravel. Then, overlap it with the fabric from the other side, ensuring a secure and substantial overlap. Use landscaping pins to fasten the overlapped fabric firmly in place. The main objective is to create a tight encapsulation around the gravel and pipe, preventing any surrounding soil or dirt from infiltrating the drainage system. Any sod replaced on top will further help in holding the fabric in its position over time.</video:description>
      <video:player_loc>https://www.youtube.com/embed/V17s91XeqvU</video:player_loc>
      <video:duration>53</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11270-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/PcpFixS88Io/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Line Trench with Landscape Fabric — French Drain Installation</video:title>
      <video:description>Unroll the commercial-grade landscape fabric along the length of the prepared trench. Ensure that there is enough excess fabric on both sides to completely wrap over the drainage pipe and gravel layer. Use a utility knife to cut the fabric to the required length. Carefully lay the fabric into the trench, pressing it against the sides and bottom, making sure there are no large wrinkles that could impede water flow. Temporarily secure the fabric in place with small rocks or bricks to prevent it from shifting while you add other materials.</video:description>
      <video:player_loc>https://www.youtube.com/embed/PcpFixS88Io</video:player_loc>
      <video:duration>32</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11271-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/stdBRIDYmDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Cover the Trench — French Drain Installation</video:title>
      <video:description>Once the landscape fabric is securely in place, carefully fold any excess fabric over the top of the gravel to fully enclose the drain system. Then, backfill the trench with the excavated topsoil. Alternatively, you can use decorative stone to cover the trench, which can also serve an aesthetic purpose in your landscape. Compact the soil lightly as you backfill to prevent significant settling later. The finished drain should blend seamlessly with the surrounding landscape.</video:description>
      <video:player_loc>https://www.youtube.com/embed/stdBRIDYmDQ</video:player_loc>
      <video:duration>5</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11271-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/QKEenuoYFDQ/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill the Trench — French Drain Installation</video:title>
      <video:description>With the drainage system, insulation, and fabric in place, begin backfilling the trench. Use the excavator to carefully dump the excavated soil back into the trench, on top of the landscape fabric. The soil fills the remaining space up to the final grade level.</video:description>
      <video:player_loc>https://www.youtube.com/embed/QKEenuoYFDQ</video:player_loc>
      <video:duration>45</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11271-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/BzXV68UWkKE/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Backfill and Final Grade — French Drain Installation</video:title>
      <video:description>The final step involves backfilling the trench with the previously excavated soil. As highlighted by the narrator, this &apos;repurposed dirt&apos; is often used to &apos;crown the backyard&apos; by creating a slight mound or positive slope over the drain line. This ensures that surface water naturally flows towards the drain system while also allowing for the restoration of the yard&apos;s aesthetics, where grass or other landscaping can be replanted over the covered drain. Proper compaction and grading are essential to prevent settling and ensure effective surface water management.</video:description>
      <video:player_loc>https://www.youtube.com/embed/BzXV68UWkKE</video:player_loc>
      <video:duration>11</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11272-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/ggN1xW_3lls/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Establish Water Discharge Point — French Drain Installation</video:title>
      <video:description>At the lowest point of the drainage system, ensure the drain pipe exits the trench and discharges water to a safe and suitable area away from the driveway, such as a garden bed, a natural slope, or a storm drain connection. The end of the pipe can be fitted with a simple drain grate or left open, depending on the discharge location.</video:description>
      <video:player_loc>https://www.youtube.com/embed/ggN1xW_3lls</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11272-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/wPkMB7qlUSo/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Connect to Storm Drain and Backfill — French Drain Installation</video:title>
      <video:description>Connect the perforated French drain pipes to a solid discharge line, preferably using &quot;high octane solid armor pipe&quot; for its durability. This solid pipe extends to a storm drain catch basin. At the catch basin, perform a &quot;core tap&quot; by drilling a hole through the concrete pipe of the basin and securely connecting the discharge line. Use &quot;QUIKRETE Hydraulic WATER-STOP CEMENT&quot; to seal the connection, as it sets quickly and is code-compliant for waterproof seals in wet conditions. Once the entire system (pipes and rock) is encapsulated by the geotextile fabric, backfill the trench with turf grass or desired landscaping materials. The grass roots will grow through the fabric, and surface water will drain into the French drain via capillary action, ensuring comprehensive drainage.</video:description>
      <video:player_loc>https://www.youtube.com/embed/wPkMB7qlUSo</video:player_loc>
      <video:duration>161</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11272-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EfCKP_NPDGA/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Identify and Prepare the Drain Exit Point — French Drain Installation</video:title>
      <video:description>The first critical step for any French drain is to establish a suitable exit point. In this case, the crew identifies an existing storm sewer inlet near the street. A worker climbs into the storm sewer to inspect and confirm the presence of an existing drain pipe that can be utilized. They find a pipe already connected to the storm sewer, which they will tap into. The pipe identified has a small amount of water dripping from it, confirming its function.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EfCKP_NPDGA</video:player_loc>
      <video:duration>101</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11273-1</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/EV3Kc_JjZjw/hqdefault.jpg</video:thumbnail_loc>
      <video:title>System Testing and Verification — French Drain Installation</video:title>
      <video:description>After the installation is complete, the final and critical step is to test the French drain system to ensure it functions effectively. The video explicitly demonstrates this by using a garden hose to introduce a significant amount of water directly into the gravel trench along the driveway. The purpose of this test is to observe if the water quickly infiltrates the drain, flows through the pipes, and discharges efficiently into the retention pond. This confirms that the system can handle stormwater as intended, despite any previous installation challenges.</video:description>
      <video:player_loc>https://www.youtube.com/embed/EV3Kc_JjZjw</video:player_loc>
      <video:duration>2</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11273-2</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/LHHohA1digI/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test System — French Drain Installation</video:title>
      <video:description>Test the drainage system by running water through it to ensure proper flow and identify any leaks or blockages. The video shows using a hose to run water into the catch basin and observing its movement through the system.</video:description>
      <video:player_loc>https://www.youtube.com/embed/LHHohA1digI</video:player_loc>
      <video:duration>73</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
  <url>
    <loc>https://mattbangswood.stesso.com/videos/11273-3</loc>
    <lastmod>2026-11-12T18:51:15.710Z</lastmod>
    <changefreq>monthly</changefreq>
    <priority>0.6</priority>
    <video:video>
      <video:thumbnail_loc>https://i.ytimg.com/vi/OanjbeWWY5s/hqdefault.jpg</video:thumbnail_loc>
      <video:title>Test the French Drain — French Drain Installation</video:title>
      <video:description>After all the construction work is complete, the video shows a test run of the French drain during rainfall. Water from the gutter downspout flows into the newly installed catch basin, which is now surrounded by white rocks for aesthetics. The water then exits the corrugated pipe into a recycled concrete runoff piece, successfully diverting the water.</video:description>
      <video:player_loc>https://www.youtube.com/embed/OanjbeWWY5s</video:player_loc>
      <video:duration>329</video:duration>
      <video:publication_date>2026-11-12T18:51:15.710Z</video:publication_date>
      <video:live>no</video:live>
    </video:video>
  </url>
</urlset>